/* * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. * * Copyright (C) 2005 James Chapman (ds1337 core) * Copyright (C) 2006 David Brownell * Copyright (C) 2009 Matthias Fuchs (rx8025 support) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include /* We can't determine type by probing, but if we expect pre-Linux code * to have set the chip up as a clock (turning on the oscillator and * setting the date and time), Linux can ignore the non-clock features. * That's a natural job for a factory or repair bench. */ enum ds_type { ds_1307, ds_1337, ds_1338, ds_1339, ds_1340, ds_1388, ds_3231, m41t00, rx_8025, // rs5c372 too? different address... }; /* RTC registers don't differ much, except for the century flag */ #define DS1307_REG_SECS 0x00 /* 00-59 */ # define DS1307_BIT_CH 0x80 # define DS1340_BIT_nEOSC 0x80 #define DS1307_REG_MIN 0x01 /* 00-59 */ #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */ # define DS1307_BIT_PM 0x20 /* in REG_HOUR */ # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ #define DS1307_REG_WDAY 0x03 /* 01-07 */ #define DS1307_REG_MDAY 0x04 /* 01-31 */ #define DS1307_REG_MONTH 0x05 /* 01-12 */ # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ #define DS1307_REG_YEAR 0x06 /* 00-99 */ /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) * start at 7, and they differ a LOT. Only control and status matter for * basic RTC date and time functionality; be careful using them. */ #define DS1307_REG_CONTROL 0x07 /* or ds1338 */ # define DS1307_BIT_OUT 0x80 # define DS1338_BIT_OSF 0x20 # define DS1307_BIT_SQWE 0x10 # define DS1307_BIT_RS1 0x02 # define DS1307_BIT_RS0 0x01 #define DS1337_REG_CONTROL 0x0e # define DS1337_BIT_nEOSC 0x80 # define DS1339_BIT_BBSQI 0x20 # define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */ # define DS1337_BIT_RS2 0x10 # define DS1337_BIT_RS1 0x08 # define DS1337_BIT_INTCN 0x04 # define DS1337_BIT_A2IE 0x02 # define DS1337_BIT_A1IE 0x01 #define DS1340_REG_CONTROL 0x07 # define DS1340_BIT_OUT 0x80 # define DS1340_BIT_FT 0x40 # define DS1340_BIT_CALIB_SIGN 0x20 # define DS1340_M_CALIBRATION 0x1f #define DS1340_REG_FLAG 0x09 # define DS1340_BIT_OSF 0x80 #define DS1337_REG_STATUS 0x0f # define DS1337_BIT_OSF 0x80 # define DS1337_BIT_A2I 0x02 # define DS1337_BIT_A1I 0x01 #define DS1339_REG_ALARM1_SECS 0x07 #define DS1339_REG_TRICKLE 0x10 #define RX8025_REG_CTRL1 0x0e # define RX8025_BIT_2412 0x20 #define RX8025_REG_CTRL2 0x0f # define RX8025_BIT_PON 0x10 # define RX8025_BIT_VDET 0x40 # define RX8025_BIT_XST 0x20 struct ds1307 { u8 offset; /* register's offset */ u8 regs[11]; enum ds_type type; unsigned long flags; #define HAS_NVRAM 0 /* bit 0 == sysfs file active */ #define HAS_ALARM 1 /* bit 1 == irq claimed */ struct i2c_client *client; struct rtc_device *rtc; struct work_struct work; s32 (*read_block_data)(struct i2c_client *client, u8 command, u8 length, u8 *values); s32 (*write_block_data)(struct i2c_client *client, u8 command, u8 length, const u8 *values); }; struct chip_desc { unsigned nvram56:1; unsigned alarm:1; }; static const struct chip_desc chips[] = { [ds_1307] = { .nvram56 = 1, }, [ds_1337] = { .alarm = 1, }, [ds_1338] = { .nvram56 = 1, }, [ds_1339] = { .alarm = 1, }, [ds_1340] = { }, [ds_3231] = { .alarm = 1, }, [m41t00] = { }, [rx_8025] = { }, }; static const struct i2c_device_id ds1307_id[] = { { "ds1307", ds_1307 }, { "ds1337", ds_1337 }, { "ds1338", ds_1338 }, { "ds1339", ds_1339 }, { "ds1388", ds_1388 }, { "ds1340", ds_1340 }, { "ds3231", ds_3231 }, { "m41t00", m41t00 }, { "rx8025", rx_8025 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1307_id); /*----------------------------------------------------------------------*/ #define BLOCK_DATA_MAX_TRIES 10 static s32 ds1307_read_block_data_once(struct i2c_client *client, u8 command, u8 length, u8 *values) { s32 i, data; for (i = 0; i < length; i++) { data = i2c_smbus_read_byte_data(client, command + i); if (data < 0) return data; values[i] = data; } return i; } static s32 ds1307_read_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values) { u8 oldvalues[I2C_SMBUS_BLOCK_MAX]; s32 ret; int tries = 0; dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length); ret = ds1307_read_block_data_once(client, command, length, values); if (ret < 0) return ret; do { if (++tries > BLOCK_DATA_MAX_TRIES) { dev_err(&client->dev, "ds1307_read_block_data failed\n"); return -EIO; } memcpy(oldvalues, values, length); ret = ds1307_read_block_data_once(client, command, length, values); if (ret < 0) return ret; } while (memcmp(oldvalues, values, length)); return length; } static s32 ds1307_write_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values) { u8 currvalues[I2C_SMBUS_BLOCK_MAX]; int tries = 0; dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length); do { s32 i, ret; if (++tries > BLOCK_DATA_MAX_TRIES) { dev_err(&client->dev, "ds1307_write_block_data failed\n"); return -EIO; } for (i = 0; i < length; i++) { ret = i2c_smbus_write_byte_data(client, command + i, values[i]); if (ret < 0) return ret; } ret = ds1307_read_block_data_once(client, command, length, currvalues); if (ret < 0) return ret; } while (memcmp(currvalues, values, length)); return length; } /*----------------------------------------------------------------------*/ /* * The IRQ logic includes a "real" handler running in IRQ context just * long enough to schedule this workqueue entry. We need a task context * to talk to the RTC, since I2C I/O calls require that; and disable the * IRQ until we clear its status on the chip, so that this handler can * work with any type of triggering (not just falling edge). * * The ds1337 and ds1339 both have two alarms, but we only use the first * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm * signal; ds1339 chips have only one alarm signal. */ static void ds1307_work(struct work_struct *work) { struct ds1307 *ds1307; struct i2c_client *client; struct mutex *lock; int stat, control; ds1307 = container_of(work, struct ds1307, work); client = ds1307->client; lock = &ds1307->rtc->ops_lock; mutex_lock(lock); stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS); if (stat < 0) goto out; if (stat & DS1337_BIT_A1I) { stat &= ~DS1337_BIT_A1I; i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat); control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); if (control < 0) goto out; control &= ~DS1337_BIT_A1IE; i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control); rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF); } out: if (test_bit(HAS_ALARM, &ds1307->flags)) enable_irq(client->irq); mutex_unlock(lock); } static irqreturn_t ds1307_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; struct ds1307 *ds1307 = i2c_get_clientdata(client); disable_irq_nosync(irq); schedule_work(&ds1307->work); return IRQ_HANDLED; } /*----------------------------------------------------------------------*/ static int ds1307_get_time(struct device *dev, struct rtc_time *t) { struct ds1307 *ds1307 = dev_get_drvdata(dev); int tmp; /* read the RTC date and time registers all at once */ tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 7, ds1307->regs); if (tmp != 7) { dev_err(dev, "%s error %d\n", "read", tmp); return -EIO; } dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", "read", ds1307->regs[0], ds1307->regs[1], ds1307->regs[2], ds1307->regs[3], ds1307->regs[4], ds1307->regs[5], ds1307->regs[6]); t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f); t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f); tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; t->tm_hour = bcd2bin(tmp); t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f); tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; t->tm_mon = bcd2bin(tmp) - 1; /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100; dev_dbg(dev, "%s secs=%d, mins=%d, " "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", "read", t->tm_sec, t->tm_min, t->tm_hour, t->tm_mday, t->tm_mon, t->tm_year, t->tm_wday); /* initial clock setting can be undefined */ return rtc_valid_tm(t); } static int ds1307_set_time(struct device *dev, struct rtc_time *t) { struct ds1307 *ds1307 = dev_get_drvdata(dev); int result; int tmp; u8 *buf = ds1307->regs; dev_dbg(dev, "%s secs=%d, mins=%d, " "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", "write", t->tm_sec, t->tm_min, t->tm_hour, t->tm_mday, t->tm_mon, t->tm_year, t->tm_wday); buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec); buf[DS1307_REG_MIN] = bin2bcd(t->tm_min); buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour); buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1); buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday); buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1); /* assume 20YY not 19YY */ tmp = t->tm_year - 100; buf[DS1307_REG_YEAR] = bin2bcd(tmp); switch (ds1307->type) { case ds_1337: case ds_1339: case ds_3231: buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; break; case ds_1340: buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | DS1340_BIT_CENTURY; break; default: break; } dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", "write", buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); result = ds1307->write_block_data(ds1307->client, ds1307->offset, 7, buf); if (result < 0) { dev_err(dev, "%s error %d\n", "write", result); return result; } return 0; } static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); int ret; if (!test_bit(HAS_ALARM, &ds1307->flags)) return -EINVAL; /* read all ALARM1, ALARM2, and status registers at once */ ret = ds1307->read_block_data(client, DS1339_REG_ALARM1_SECS, 9, ds1307->regs); if (ret != 9) { dev_err(dev, "%s error %d\n", "alarm read", ret); return -EIO; } dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", "alarm read", ds1307->regs[0], ds1307->regs[1], ds1307->regs[2], ds1307->regs[3], ds1307->regs[4], ds1307->regs[5], ds1307->regs[6], ds1307->regs[7], ds1307->regs[8]); /* report alarm time (ALARM1); assume 24 hour and day-of-month modes, * and that all four fields are checked matches */ t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f); t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f); t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f); t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f); t->time.tm_mon = -1; t->time.tm_year = -1; t->time.tm_wday = -1; t->time.tm_yday = -1; t->time.tm_isdst = -1; /* ... and status */ t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE); t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I); dev_dbg(dev, "%s secs=%d, mins=%d, " "hours=%d, mday=%d, enabled=%d, pending=%d\n", "alarm read", t->time.tm_sec, t->time.tm_min, t->time.tm_hour, t->time.tm_mday, t->enabled, t->pending); return 0; } static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); unsigned char *buf = ds1307->regs; u8 control, status; int ret; if (!test_bit(HAS_ALARM, &ds1307->flags)) return -EINVAL; dev_dbg(dev, "%s secs=%d, mins=%d, " "hours=%d, mday=%d, enabled=%d, pending=%d\n", "alarm set", t->time.tm_sec, t->time.tm_min, t->time.tm_hour, t->time.tm_mday, t->enabled, t->pending); /* read current status of both alarms and the chip */ ret = ds1307->read_block_data(client, DS1339_REG_ALARM1_SECS, 9, buf); if (ret != 9) { dev_err(dev, "%s error %d\n", "alarm write", ret); return -EIO; } control = ds1307->regs[7]; status = ds1307->regs[8]; dev_dbg(dev, "%s: %02x %02x %02x %02x, %02x %02x %02x, %02x %02x\n", "alarm set (old status)", ds1307->regs[0], ds1307->regs[1], ds1307->regs[2], ds1307->regs[3], ds1307->regs[4], ds1307->regs[5], ds1307->regs[6], control, status); /* set ALARM1, using 24 hour and day-of-month modes */ buf[0] = bin2bcd(t->time.tm_sec); buf[1] = bin2bcd(t->time.tm_min); buf[2] = bin2bcd(t->time.tm_hour); buf[3] = bin2bcd(t->time.tm_mday); /* set ALARM2 to non-garbage */ buf[4] = 0; buf[5] = 0; buf[6] = 0; /* optionally enable ALARM1 */ buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE); if (t->enabled) { dev_dbg(dev, "alarm IRQ armed\n"); buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */ } buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I); ret = ds1307->write_block_data(client, DS1339_REG_ALARM1_SECS, 9, buf); if (ret < 0) { dev_err(dev, "can't set alarm time\n"); return ret; } return 0; } static int ds1307_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct i2c_client *client = to_i2c_client(dev); struct ds1307 *ds1307 = i2c_get_clientdata(client); int ret; switch (cmd) { case RTC_AIE_OFF: if (!test_bit(HAS_ALARM, &ds1307->flags)) return -ENOTTY; ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); if (ret < 0) return ret; ret &= ~DS1337_BIT_A1IE; ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret); if (ret < 0) return ret; break; case RTC_AIE_ON: if (!test_bit(HAS_ALARM, &ds1307->flags)) return -ENOTTY; ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL); if (ret < 0) return ret; ret |= DS1337_BIT_A1IE; ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret); if (ret < 0) return ret; break; default: return -ENOIOCTLCMD; } return 0; } static const struct rtc_class_ops ds13xx_rtc_ops = { .read_time = ds1307_get_time, .set_time = ds1307_set_time, .read_alarm = ds1337_read_alarm, .set_alarm = ds1337_set_alarm, .ioctl = ds1307_ioctl, }; /*----------------------------------------------------------------------*/ #define NVRAM_SIZE 56 static ssize_t ds1307_nvram_read(struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct i2c_client *client; struct ds1307 *ds1307; int result; client = kobj_to_i2c_client(kobj); ds1307 = i2c_get_clientdata(client); if (unlikely(off >= NVRAM_SIZE)) return 0; if ((off + count) > NVRAM_SIZE) count = NVRAM_SIZE - off; if (unlikely(!count)) return count; result = ds1307->read_block_data(client, 8 + off, count, buf); if (result < 0) dev_err(&client->dev, "%s error %d\n", "nvram read", result); return result; } static ssize_t ds1307_nvram_write(struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct i2c_client *client; struct ds1307 *ds1307; int result; client = kobj_to_i2c_client(kobj); ds1307 = i2c_get_clientdata(client); if (unlikely(off >= NVRAM_SIZE)) return -EFBIG; if ((off + count) > NVRAM_SIZE) count = NVRAM_SIZE - off; if (unlikely(!count)) return count; result = ds1307->write_block_data(client, 8 + off, count, buf); if (result < 0) { dev_err(&client->dev, "%s error %d\n", "nvram write", result); return result; } return count; } static struct bin_attribute nvram = { .attr = { .name = "nvram", .mode = S_IRUGO | S_IWUSR, }, .read = ds1307_nvram_read, .write = ds1307_nvram_write, .size = NVRAM_SIZE, }; /*----------------------------------------------------------------------*/ static struct i2c_driver ds1307_driver; static int __devinit ds1307_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ds1307 *ds1307; int err = -ENODEV; int tmp; const struct chip_desc *chip = &chips[id->driver_data]; struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); int want_irq = false; unsigned char *buf; static const int bbsqi_bitpos[] = { [ds_1337] = 0, [ds_1339] = DS1339_BIT_BBSQI, [ds_3231] = DS3231_BIT_BBSQW, }; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA) && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) return -EIO; if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) return -ENOMEM; i2c_set_clientdata(client, ds1307); ds1307->client = client; ds1307->type = id->driver_data; ds1307->offset = 0; buf = ds1307->regs; if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { ds1307->read_block_data = i2c_smbus_read_i2c_block_data; ds1307->write_block_data = i2c_smbus_write_i2c_block_data; } else { ds1307->read_block_data = ds1307_read_block_data; ds1307->write_block_data = ds1307_write_block_data; } switch (ds1307->type) { case ds_1337: case ds_1339: case ds_3231: /* has IRQ? */ if (ds1307->client->irq > 0 && chip->alarm) { INIT_WORK(&ds1307->work, ds1307_work); want_irq = true; } /* get registers that the "rtc" read below won't read... */ tmp = ds1307->read_block_data(ds1307->client, DS1337_REG_CONTROL, 2, buf); if (tmp != 2) { pr_debug("read error %d\n", tmp); err = -EIO; goto exit_free; } /* oscillator off? turn it on, so clock can tick. */ if (ds1307->regs[0] & DS1337_BIT_nEOSC) ds1307->regs[0] &= ~DS1337_BIT_nEOSC; /* Using IRQ? Disable the square wave and both alarms. * For some variants, be sure alarms can trigger when we're * running on Vbackup (BBSQI/BBSQW) */ if (want_irq) { ds1307->regs[0] |= DS1337_BIT_INTCN | bbsqi_bitpos[ds1307->type]; ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE); } i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ds1307->regs[0]); /* oscillator fault? clear flag, and warn */ if (ds1307->regs[1] & DS1337_BIT_OSF) { i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, ds1307->regs[1] & ~DS1337_BIT_OSF); dev_warn(&client->dev, "SET TIME!\n"); } break; case rx_8025: tmp = i2c_smbus_read_i2c_block_data(ds1307->client, RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); if (tmp != 2) { pr_debug("read error %d\n", tmp); err = -EIO; goto exit_free; } /* oscillator off? turn it on, so clock can tick. */ if (!(ds1307->regs[1] & RX8025_BIT_XST)) { ds1307->regs[1] |= RX8025_BIT_XST; i2c_smbus_write_byte_data(client, RX8025_REG_CTRL2 << 4 | 0x08, ds1307->regs[1]); dev_warn(&client->dev, "oscillator stop detected - SET TIME!\n"); } if (ds1307->regs[1] & RX8025_BIT_PON) { ds1307->regs[1] &= ~RX8025_BIT_PON; i2c_smbus_write_byte_data(client, RX8025_REG_CTRL2 << 4 | 0x08, ds1307->regs[1]); dev_warn(&client->dev, "power-on detected\n"); } if (ds1307->regs[1] & RX8025_BIT_VDET) { ds1307->regs[1] &= ~RX8025_BIT_VDET; i2c_smbus_write_byte_data(client, RX8025_REG_CTRL2 << 4 | 0x08, ds1307->regs[1]); dev_warn(&client->dev, "voltage drop detected\n"); } /* make sure we are running in 24hour mode */ if (!(ds1307->regs[0] & RX8025_BIT_2412)) { u8 hour; /* switch to 24 hour mode */ i2c_smbus_write_byte_data(client, RX8025_REG_CTRL1 << 4 | 0x08, ds1307->regs[0] | RX8025_BIT_2412); tmp = i2c_smbus_read_i2c_block_data(ds1307->client, RX8025_REG_CTRL1 << 4 | 0x08, 2, buf); if (tmp != 2) { pr_debug("read error %d\n", tmp); err = -EIO; goto exit_free; } /* correct hour */ hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]); if (hour == 12) hour = 0; if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) hour += 12; i2c_smbus_write_byte_data(client, DS1307_REG_HOUR << 4 | 0x08, hour); } break; case ds_1388: ds1307->offset = 1; /* Seconds starts at 1 */ break; default: break; } read_rtc: /* read RTC registers */ tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf); if (tmp != 8) { pr_debug("read error %d\n", tmp); err = -EIO; goto exit_free; } /* minimal sanity checking; some chips (like DS1340) don't * specify the extra bits as must-be-zero, but there are * still a few values that are clearly out-of-range. */ tmp = ds1307->regs[DS1307_REG_SECS]; switch (ds1307->type) { case ds_1307: case m41t00: /* clock halted? turn it on, so clock can tick. */ if (tmp & DS1307_BIT_CH) { i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); dev_warn(&client->dev, "SET TIME!\n"); goto read_rtc; } break; case ds_1338: /* clock halted? turn it on, so clock can tick. */ if (tmp & DS1307_BIT_CH) i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); /* oscillator fault? clear flag, and warn */ if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) { i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL, ds1307->regs[DS1307_REG_CONTROL] & ~DS1338_BIT_OSF); dev_warn(&client->dev, "SET TIME!\n"); goto read_rtc; } break; case ds_1340: /* clock halted? turn it on, so clock can tick. */ if (tmp & DS1340_BIT_nEOSC) i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG); if (tmp < 0) { pr_debug("read error %d\n", tmp); err = -EIO; goto exit_free; } /* oscillator fault? clear flag, and warn */ if (tmp & DS1340_BIT_OSF) { i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0); dev_warn(&client->dev, "SET TIME!\n"); } break; case rx_8025: case ds_1337: case ds_1339: case ds_1388: case ds_3231: break; } tmp = ds1307->regs[DS1307_REG_HOUR]; switch (ds1307->type) { case ds_1340: case m41t00: /* NOTE: ignores century bits; fix before deploying * systems that will run through year 2100. */ break; case rx_8025: break; default: if (!(tmp & DS1307_BIT_12HR)) break; /* Be sure we're in 24 hour mode. Multi-master systems * take note... */ tmp = bcd2bin(tmp & 0x1f); if (tmp == 12) tmp = 0; if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) tmp += 12; i2c_smbus_write_byte_data(client, DS1307_REG_HOUR, bin2bcd(tmp)); } ds1307->rtc = rtc_device_register(client->name, &client->dev, &ds13xx_rtc_ops, THIS_MODULE); if (IS_ERR(ds1307->rtc)) { err = PTR_ERR(ds1307->rtc); dev_err(&client->dev, "unable to register the class device\n"); goto exit_free; } if (want_irq) { err = request_irq(client->irq, ds1307_irq, 0, ds1307->rtc->name, client); if (err) { dev_err(&client->dev, "unable to request IRQ!\n"); goto exit_irq; } set_bit(HAS_ALARM, &ds1307->flags); dev_dbg(&client->dev, "got IRQ %d\n", client->irq); } if (chip->nvram56) { err = sysfs_create_bin_file(&client->dev.kobj, &nvram); if (err == 0) { set_bit(HAS_NVRAM, &ds1307->flags); dev_info(&client->dev, "56 bytes nvram\n"); } } return 0; exit_irq: rtc_device_unregister(ds1307->rtc); exit_free: kfree(ds1307); return err; } static int __devexit ds1307_remove(struct i2c_client *client) { struct ds1307 *ds1307 = i2c_get_clientdata(client); if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) { free_irq(client->irq, client); cancel_work_sync(&ds1307->work); } if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags)) sysfs_remove_bin_file(&client->dev.kobj, &nvram); rtc_device_unregister(ds1307->rtc); kfree(ds1307); return 0; } static struct i2c_driver ds1307_driver = { .driver = { .name = "rtc-ds1307", .owner = THIS_MODULE, }, .probe = ds1307_probe, .remove = __devexit_p(ds1307_remove), .id_table = ds1307_id, }; static int __init ds1307_init(void) { return i2c_add_driver(&ds1307_driver); } module_init(ds1307_init); static void __exit ds1307_exit(void) { i2c_del_driver(&ds1307_driver); } module_exit(ds1307_exit); MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); MODULE_LICENSE("GPL");