/* * cardbus.c -- 16-bit PCMCIA core support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * The initial developer of the original code is David A. Hinds * . Portions created by David A. Hinds * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * (C) 1999 David A. Hinds */ /* * Cardbus handling has been re-written to be more of a PCI bridge thing, * and the PCI code basically does all the resource handling. * * Linus, Jan 2000 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "cs_internal.h" /*====================================================================*/ /* Offsets in the Expansion ROM Image Header */ #define ROM_SIGNATURE 0x0000 /* 2 bytes */ #define ROM_DATA_PTR 0x0018 /* 2 bytes */ /* Offsets in the CardBus PC Card Data Structure */ #define PCDATA_SIGNATURE 0x0000 /* 4 bytes */ #define PCDATA_VPD_PTR 0x0008 /* 2 bytes */ #define PCDATA_LENGTH 0x000a /* 2 bytes */ #define PCDATA_REVISION 0x000c #define PCDATA_IMAGE_SZ 0x0010 /* 2 bytes */ #define PCDATA_ROM_LEVEL 0x0012 /* 2 bytes */ #define PCDATA_CODE_TYPE 0x0014 #define PCDATA_INDICATOR 0x0015 /*===================================================================== Expansion ROM's have a special layout, and pointers specify an image number and an offset within that image. xlate_rom_addr() converts an image/offset address to an absolute offset from the ROM's base address. =====================================================================*/ static u_int xlate_rom_addr(void __iomem *b, u_int addr) { u_int img = 0, ofs = 0, sz; u_short data; while ((readb(b) == 0x55) && (readb(b + 1) == 0xaa)) { if (img == (addr >> 28)) return (addr & 0x0fffffff) + ofs; data = readb(b + ROM_DATA_PTR) + (readb(b + ROM_DATA_PTR + 1) << 8); sz = 512 * (readb(b + data + PCDATA_IMAGE_SZ) + (readb(b + data + PCDATA_IMAGE_SZ + 1) << 8)); if ((sz == 0) || (readb(b + data + PCDATA_INDICATOR) & 0x80)) break; b += sz; ofs += sz; img++; } return 0; } /*===================================================================== These are similar to setup_cis_mem and release_cis_mem for 16-bit cards. The "result" that is used externally is the cb_cis_virt pointer in the struct pcmcia_socket structure. =====================================================================*/ static void cb_release_cis_mem(struct pcmcia_socket * s) { if (s->cb_cis_virt) { cs_dbg(s, 1, "cb_release_cis_mem()\n"); iounmap(s->cb_cis_virt); s->cb_cis_virt = NULL; s->cb_cis_res = NULL; } } static int cb_setup_cis_mem(struct pcmcia_socket * s, struct resource *res) { unsigned int start, size; if (res == s->cb_cis_res) return 0; if (s->cb_cis_res) cb_release_cis_mem(s); start = res->start; size = res->end - start + 1; s->cb_cis_virt = ioremap(start, size); if (!s->cb_cis_virt) return -1; s->cb_cis_res = res; return 0; } /*===================================================================== This is used by the CIS processing code to read CIS information from a CardBus device. =====================================================================*/ int read_cb_mem(struct pcmcia_socket * s, int space, u_int addr, u_int len, void *ptr) { struct pci_dev *dev; struct resource *res; cs_dbg(s, 3, "read_cb_mem(%d, %#x, %u)\n", space, addr, len); dev = pci_get_slot(s->cb_dev->subordinate, 0); if (!dev) goto fail; /* Config space? */ if (space == 0) { if (addr + len > 0x100) goto failput; for (; len; addr++, ptr++, len--) pci_read_config_byte(dev, addr, ptr); return 0; } res = dev->resource + space - 1; pci_dev_put(dev); if (!res->flags) goto fail; if (cb_setup_cis_mem(s, res) != 0) goto fail; if (space == 7) { addr = xlate_rom_addr(s->cb_cis_virt, addr); if (addr == 0) goto fail; } if (addr + len > res->end - res->start) goto fail; memcpy_fromio(ptr, s->cb_cis_virt + addr, len); return 0; failput: pci_dev_put(dev); fail: memset(ptr, 0xff, len); return -1; } /*===================================================================== cb_alloc() and cb_free() allocate and free the kernel data structures for a Cardbus device, and handle the lowest level PCI device setup issues. =====================================================================*/ /* * Since there is only one interrupt available to CardBus * devices, all devices downstream of this device must * be using this IRQ. */ static void cardbus_assign_irqs(struct pci_bus *bus, int irq) { struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { u8 irq_pin; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin); if (irq_pin) { dev->irq = irq; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); } if (dev->subordinate) cardbus_assign_irqs(dev->subordinate, irq); } } int __ref cb_alloc(struct pcmcia_socket * s) { struct pci_bus *bus = s->cb_dev->subordinate; struct pci_dev *dev; unsigned int max, pass; s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0)); // pcibios_fixup_bus(bus); max = bus->secondary; for (pass = 0; pass < 2; pass++) list_for_each_entry(dev, &bus->devices, bus_list) if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) max = pci_scan_bridge(bus, dev, max, pass); /* * Size all resources below the CardBus controller. */ pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); cardbus_assign_irqs(bus, s->pci_irq); /* socket specific tune function */ if (s->tune_bridge) s->tune_bridge(s, bus); pci_enable_bridges(bus); pci_bus_add_devices(bus); s->irq.AssignedIRQ = s->pci_irq; return 0; } void cb_free(struct pcmcia_socket * s) { struct pci_dev *bridge = s->cb_dev; cb_release_cis_mem(s); if (bridge) pci_remove_behind_bridge(bridge); }