/* * drivers/mtd/nand.c * * Overview: * This is the generic MTD driver for NAND flash devices. It should be * capable of working with almost all NAND chips currently available. * Basic support for AG-AND chips is provided. * * Additional technical information is available on * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * 2002-2006 Thomas Gleixner (tglx@linutronix.de) * * Credits: * David Woodhouse for adding multichip support * * Aleph One Ltd. and Toby Churchill Ltd. for supporting the * rework for 2K page size chips * * TODO: * Enable cached programming for 2k page size chips * Check, if mtd->ecctype should be set to MTD_ECC_HW * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_MTD_PARTITIONS #include #endif /* Define default oob placement schemes for large and small page devices */ static struct nand_ecclayout nand_oob_8 = { .eccbytes = 3, .eccpos = {0, 1, 2}, .oobfree = { {.offset = 3, .length = 2}, {.offset = 6, .length = 2}} }; static struct nand_ecclayout nand_oob_16 = { .eccbytes = 6, .eccpos = {0, 1, 2, 3, 6, 7}, .oobfree = { {.offset = 8, . length = 8}} }; static struct nand_ecclayout nand_oob_64 = { .eccbytes = 24, .eccpos = { 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63}, .oobfree = { {.offset = 2, .length = 38}} }; static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state); static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); /* * For devices which display every fart in the system on a seperate LED. Is * compiled away when LED support is disabled. */ DEFINE_LED_TRIGGER(nand_led_trigger); /** * nand_release_device - [GENERIC] release chip * @mtd: MTD device structure * * Deselect, release chip lock and wake up anyone waiting on the device */ static void nand_release_device(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; /* De-select the NAND device */ chip->select_chip(mtd, -1); /* Release the controller and the chip */ spin_lock(&chip->controller->lock); chip->controller->active = NULL; chip->state = FL_READY; wake_up(&chip->controller->wq); spin_unlock(&chip->controller->lock); } /** * nand_read_byte - [DEFAULT] read one byte from the chip * @mtd: MTD device structure * * Default read function for 8bit buswith */ static uint8_t nand_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; return readb(chip->IO_ADDR_R); } /** * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip * @mtd: MTD device structure * * Default read function for 16bit buswith with * endianess conversion */ static uint8_t nand_read_byte16(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); } /** * nand_read_word - [DEFAULT] read one word from the chip * @mtd: MTD device structure * * Default read function for 16bit buswith without * endianess conversion */ static u16 nand_read_word(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; return readw(chip->IO_ADDR_R); } /** * nand_select_chip - [DEFAULT] control CE line * @mtd: MTD device structure * @chipnr: chipnumber to select, -1 for deselect * * Default select function for 1 chip devices. */ static void nand_select_chip(struct mtd_info *mtd, int chipnr) { struct nand_chip *chip = mtd->priv; switch (chipnr) { case -1: chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); break; case 0: break; default: BUG(); } } /** * nand_write_buf - [DEFAULT] write buffer to chip * @mtd: MTD device structure * @buf: data buffer * @len: number of bytes to write * * Default write function for 8bit buswith */ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; for (i = 0; i < len; i++) writeb(buf[i], chip->IO_ADDR_W); } /** * nand_read_buf - [DEFAULT] read chip data into buffer * @mtd: MTD device structure * @buf: buffer to store date * @len: number of bytes to read * * Default read function for 8bit buswith */ static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; for (i = 0; i < len; i++) buf[i] = readb(chip->IO_ADDR_R); } /** * nand_verify_buf - [DEFAULT] Verify chip data against buffer * @mtd: MTD device structure * @buf: buffer containing the data to compare * @len: number of bytes to compare * * Default verify function for 8bit buswith */ static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; for (i = 0; i < len; i++) if (buf[i] != readb(chip->IO_ADDR_R)) return -EFAULT; return 0; } /** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd: MTD device structure * @buf: data buffer * @len: number of bytes to write * * Default write function for 16bit buswith */ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; for (i = 0; i < len; i++) writew(p[i], chip->IO_ADDR_W); } /** * nand_read_buf16 - [DEFAULT] read chip data into buffer * @mtd: MTD device structure * @buf: buffer to store date * @len: number of bytes to read * * Default read function for 16bit buswith */ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; for (i = 0; i < len; i++) p[i] = readw(chip->IO_ADDR_R); } /** * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer * @mtd: MTD device structure * @buf: buffer containing the data to compare * @len: number of bytes to compare * * Default verify function for 16bit buswith */ static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; for (i = 0; i < len; i++) if (p[i] != readw(chip->IO_ADDR_R)) return -EFAULT; return 0; } /** * nand_block_bad - [DEFAULT] Read bad block marker from the chip * @mtd: MTD device structure * @ofs: offset from device start * @getchip: 0, if the chip is already selected * * Check, if the block is bad. */ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { int page, chipnr, res = 0; struct nand_chip *chip = mtd->priv; u16 bad; page = (int)(ofs >> chip->page_shift) & chip->pagemask; if (getchip) { chipnr = (int)(ofs >> chip->chip_shift); nand_get_device(chip, mtd, FL_READING); /* Select the NAND device */ chip->select_chip(mtd, chipnr); } if (chip->options & NAND_BUSWIDTH_16) { chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE, page); bad = cpu_to_le16(chip->read_word(mtd)); if (chip->badblockpos & 0x1) bad >>= 8; if ((bad & 0xFF) != 0xff) res = 1; } else { chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page); if (chip->read_byte(mtd) != 0xff) res = 1; } if (getchip) nand_release_device(mtd); return res; } /** * nand_default_block_markbad - [DEFAULT] mark a block bad * @mtd: MTD device structure * @ofs: offset from device start * * This is the default implementation, which can be overridden by * a hardware specific driver. */ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; uint8_t buf[2] = { 0, 0 }; int block, ret; /* Get block number */ block = (int)(ofs >> chip->bbt_erase_shift); if (chip->bbt) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ if (chip->options & NAND_USE_FLASH_BBT) ret = nand_update_bbt(mtd, ofs); else { /* We write two bytes, so we dont have to mess with 16 bit * access */ nand_get_device(chip, mtd, FL_WRITING); ofs += mtd->oobsize; chip->ops.len = chip->ops.ooblen = 2; chip->ops.datbuf = NULL; chip->ops.oobbuf = buf; chip->ops.ooboffs = chip->badblockpos & ~0x01; ret = nand_do_write_oob(mtd, ofs, &chip->ops); nand_release_device(mtd); } if (!ret) mtd->ecc_stats.badblocks++; return ret; } /** * nand_check_wp - [GENERIC] check if the chip is write protected * @mtd: MTD device structure * Check, if the device is write protected * * The function expects, that the device is already selected */ static int nand_check_wp(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; /* Check the WP bit */ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; } /** * nand_block_checkbad - [GENERIC] Check if a block is marked bad * @mtd: MTD device structure * @ofs: offset from device start * @getchip: 0, if the chip is already selected * @allowbbt: 1, if its allowed to access the bbt area * * Check, if the block is bad. Either by reading the bad block table or * calling of the scan function. */ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) { struct nand_chip *chip = mtd->priv; if (!chip->bbt) return chip->block_bad(mtd, ofs, getchip); /* Return info from the table */ return nand_isbad_bbt(mtd, ofs, allowbbt); } /* * Wait for the ready pin, after a command * The timeout is catched later. */ void nand_wait_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; unsigned long timeo = jiffies + 2; led_trigger_event(nand_led_trigger, LED_FULL); /* wait until command is processed or timeout occures */ do { if (chip->dev_ready(mtd)) break; touch_softlockup_watchdog(); } while (time_before(jiffies, timeo)); led_trigger_event(nand_led_trigger, LED_OFF); } EXPORT_SYMBOL_GPL(nand_wait_ready); /** * nand_command - [DEFAULT] Send command to NAND device * @mtd: MTD device structure * @command: the command to be sent * @column: the column address for this command, -1 if none * @page_addr: the page address for this command, -1 if none * * Send command to NAND device. This function is used for small page * devices (256/512 Bytes per page) */ static void nand_command(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { register struct nand_chip *chip = mtd->priv; int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; /* * Write out the command to the device. */ if (command == NAND_CMD_SEQIN) { int readcmd; if (column >= mtd->writesize) { /* OOB area */ column -= mtd->writesize; readcmd = NAND_CMD_READOOB; } else if (column < 256) { /* First 256 bytes --> READ0 */ readcmd = NAND_CMD_READ0; } else { column -= 256; readcmd = NAND_CMD_READ1; } chip->cmd_ctrl(mtd, readcmd, ctrl); ctrl &= ~NAND_CTRL_CHANGE; } chip->cmd_ctrl(mtd, command, ctrl); /* * Address cycle, when necessary */ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ if (chip->options & NAND_BUSWIDTH_16) column >>= 1; chip->cmd_ctrl(mtd, column, ctrl); ctrl &= ~NAND_CTRL_CHANGE; } if (page_addr != -1) { chip->cmd_ctrl(mtd, page_addr, ctrl); ctrl &= ~NAND_CTRL_CHANGE; chip->cmd_ctrl(mtd, page_addr >> 8, ctrl); /* One more address cycle for devices > 32MiB */ if (chip->chipsize > (32 << 20)) chip->cmd_ctrl(mtd, page_addr >> 16, ctrl); } chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers * status and sequential in needs no delay */ switch (command) { case NAND_CMD_PAGEPROG: case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_STATUS: return; case NAND_CMD_RESET: if (chip->dev_ready) break; udelay(chip->chip_delay); chip->cmd_ctrl(mtd, NAND_CMD_STATUS, NAND_CTRL_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; return; /* This applies to read commands */ default: /* * If we don't have access to the busy pin, we apply the given * command delay */ if (!chip->dev_ready) { udelay(chip->chip_delay); return; } } /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ ndelay(100); nand_wait_ready(mtd); } /** * nand_command_lp - [DEFAULT] Send command to NAND large page device * @mtd: MTD device structure * @command: the command to be sent * @column: the column address for this command, -1 if none * @page_addr: the page address for this command, -1 if none * * Send command to NAND device. This is the version for the new large page * devices We dont have the separate regions as we have in the small page * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. */ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { register struct nand_chip *chip = mtd->priv; /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { column += mtd->writesize; command = NAND_CMD_READ0; } /* Command latch cycle */ chip->cmd_ctrl(mtd, command & 0xff, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ if (chip->options & NAND_BUSWIDTH_16) column >>= 1; chip->cmd_ctrl(mtd, column, ctrl); ctrl &= ~NAND_CTRL_CHANGE; chip->cmd_ctrl(mtd, column >> 8, ctrl); } if (page_addr != -1) { chip->cmd_ctrl(mtd, page_addr, ctrl); chip->cmd_ctrl(mtd, page_addr >> 8, NAND_NCE | NAND_ALE); /* One more address cycle for devices > 128MiB */ if (chip->chipsize > (128 << 20)) chip->cmd_ctrl(mtd, page_addr >> 16, NAND_NCE | NAND_ALE); } } chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers * status, sequential in, and deplete1 need no delay */ switch (command) { case NAND_CMD_CACHEDPROG: case NAND_CMD_PAGEPROG: case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_RNDIN: case NAND_CMD_STATUS: case NAND_CMD_DEPLETE1: return; /* * read error status commands require only a short delay */ case NAND_CMD_STATUS_ERROR: case NAND_CMD_STATUS_ERROR0: case NAND_CMD_STATUS_ERROR1: case NAND_CMD_STATUS_ERROR2: case NAND_CMD_STATUS_ERROR3: udelay(chip->chip_delay); return; case NAND_CMD_RESET: if (chip->dev_ready) break; udelay(chip->chip_delay); chip->cmd_ctrl(mtd, NAND_CMD_STATUS, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; return; case NAND_CMD_RNDOUT: /* No ready / busy check necessary */ chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); return; case NAND_CMD_READ0: chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* This applies to read commands */ default: /* * If we don't have access to the busy pin, we apply the given * command delay */ if (!chip->dev_ready) { udelay(chip->chip_delay); return; } } /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ ndelay(100); nand_wait_ready(mtd); } /** * nand_get_device - [GENERIC] Get chip for selected access * @chip: the nand chip descriptor * @mtd: MTD device structure * @new_state: the state which is requested * * Get the device and lock it for exclusive access */ static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state) { spinlock_t *lock = &chip->controller->lock; wait_queue_head_t *wq = &chip->controller->wq; DECLARE_WAITQUEUE(wait, current); retry: spin_lock(lock); /* Hardware controller shared among independend devices */ /* Hardware controller shared among independend devices */ if (!chip->controller->active) chip->controller->active = chip; if (chip->controller->active == chip && chip->state == FL_READY) { chip->state = new_state; spin_unlock(lock); return 0; } if (new_state == FL_PM_SUSPENDED) { spin_unlock(lock); return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; } set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(wq, &wait); spin_unlock(lock); schedule(); remove_wait_queue(wq, &wait); goto retry; } /** * nand_wait - [DEFAULT] wait until the command is done * @mtd: MTD device structure * @chip: NAND chip structure * * Wait for command done. This applies to erase and program only * Erase can take up to 400ms and program up to 20ms according to * general NAND and SmartMedia specs */ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) { unsigned long timeo = jiffies; int status, state = chip->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; else timeo += (HZ * 20) / 1000; led_trigger_event(nand_led_trigger, LED_FULL); /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ ndelay(100); if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); else chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); while (time_before(jiffies, timeo)) { if (chip->dev_ready) { if (chip->dev_ready(mtd)) break; } else { if (chip->read_byte(mtd) & NAND_STATUS_READY) break; } cond_resched(); } led_trigger_event(nand_led_trigger, LED_OFF); status = (int)chip->read_byte(mtd); return status; } /** * nand_read_page_raw - [Intern] read raw page data without ecc * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data */ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf) { chip->read_buf(mtd, buf, mtd->writesize); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return 0; } /** * nand_read_page_swecc - [REPLACABLE] software ecc based page read function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; chip->ecc.read_page_raw(mtd, chip, buf); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); for (i = 0; i < chip->ecc.total; i++) ecc_code[i] = chip->oob_poi[eccpos[i]]; eccsteps = chip->ecc.steps; p = buf; for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; } return 0; } /** * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data * * Not for syndrome calculating ecc controllers which need a special oob layout */ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *ecc_calc = chip->buffers->ecccalc; uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { chip->ecc.hwctl(mtd, NAND_ECC_READ); chip->read_buf(mtd, p, eccsize); chip->ecc.calculate(mtd, p, &ecc_calc[i]); } chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); for (i = 0; i < chip->ecc.total; i++) ecc_code[i] = chip->oob_poi[eccpos[i]]; eccsteps = chip->ecc.steps; p = buf; for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; } return 0; } /** * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. */ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *p = buf; uint8_t *oob = chip->oob_poi; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { int stat; chip->ecc.hwctl(mtd, NAND_ECC_READ); chip->read_buf(mtd, p, eccsize); if (chip->ecc.prepad) { chip->read_buf(mtd, oob, chip->ecc.prepad); oob += chip->ecc.prepad; } chip->ecc.hwctl(mtd, NAND_ECC_READSYN); chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; oob += eccbytes; if (chip->ecc.postpad) { chip->read_buf(mtd, oob, chip->ecc.postpad); oob += chip->ecc.postpad; } } /* Calculate remaining oob bytes */ i = mtd->oobsize - (oob - chip->oob_poi); if (i) chip->read_buf(mtd, oob, i); return 0; } /** * nand_transfer_oob - [Internal] Transfer oob to client buffer * @chip: nand chip structure * @oob: oob destination address * @ops: oob ops structure * @len: size of oob to transfer */ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, struct mtd_oob_ops *ops, size_t len) { switch(ops->mode) { case MTD_OOB_PLACE: case MTD_OOB_RAW: memcpy(oob, chip->oob_poi + ops->ooboffs, len); return oob + len; case MTD_OOB_AUTO: { struct nand_oobfree *free = chip->ecc.layout->oobfree; uint32_t boffs = 0, roffs = ops->ooboffs; size_t bytes = 0; for(; free->length && len; free++, len -= bytes) { /* Read request not from offset 0 ? */ if (unlikely(roffs)) { if (roffs >= free->length) { roffs -= free->length; continue; } boffs = free->offset + roffs; bytes = min_t(size_t, len, (free->length - roffs)); roffs = 0; } else { bytes = min_t(size_t, len, free->length); boffs = free->offset; } memcpy(oob, chip->oob_poi + boffs, bytes); oob += bytes; } return oob; } default: BUG(); } return NULL; } /** * nand_do_read_ops - [Internal] Read data with ECC * * @mtd: MTD device structure * @from: offset to read from * @ops: oob ops structure * * Internal function. Called with chip held. */ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int chipnr, page, realpage, col, bytes, aligned; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; int sndcmd = 1; int ret = 0; uint32_t readlen = ops->len; uint32_t oobreadlen = ops->ooblen; uint8_t *bufpoi, *oob, *buf; stats = mtd->ecc_stats; chipnr = (int)(from >> chip->chip_shift); chip->select_chip(mtd, chipnr); realpage = (int)(from >> chip->page_shift); page = realpage & chip->pagemask; col = (int)(from & (mtd->writesize - 1)); buf = ops->datbuf; oob = ops->oobbuf; while(1) { bytes = min(mtd->writesize - col, readlen); aligned = (bytes == mtd->writesize); /* Is the current page in the buffer ? */ if (realpage != chip->pagebuf || oob) { bufpoi = aligned ? buf : chip->buffers->databuf; if (likely(sndcmd)) { chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); sndcmd = 0; } /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi); if (ret < 0) break; /* Transfer not aligned data */ if (!aligned) { chip->pagebuf = realpage; memcpy(buf, chip->buffers->databuf + col, bytes); } buf += bytes; if (unlikely(oob)) { /* Raw mode does data:oob:data:oob */ if (ops->mode != MTD_OOB_RAW) { int toread = min(oobreadlen, chip->ecc.layout->oobavail); if (toread) { oob = nand_transfer_oob(chip, oob, ops, toread); oobreadlen -= toread; } } else buf = nand_transfer_oob(chip, buf, ops, mtd->oobsize); } if (!(chip->options & NAND_NO_READRDY)) { /* * Apply delay or wait for ready/busy pin. Do * this before the AUTOINCR check, so no * problems arise if a chip which does auto * increment is marked as NOAUTOINCR by the * board driver. */ if (!chip->dev_ready) udelay(chip->chip_delay); else nand_wait_ready(mtd); } } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; } readlen -= bytes; if (!readlen) break; /* For subsequent reads align to page boundary. */ col = 0; /* Increment page address */ realpage++; page = realpage & chip->pagemask; /* Check, if we cross a chip boundary */ if (!page) { chipnr++; chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } /* Check, if the chip supports auto page increment * or if we have hit a block boundary. */ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) sndcmd = 1; } ops->retlen = ops->len - (size_t) readlen; if (oob) ops->oobretlen = ops->ooblen - oobreadlen; if (ret) return ret; if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG; return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; } /** * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read * @retlen: pointer to variable to store the number of read bytes * @buf: the databuffer to put data * * Get hold of the chip and call nand_do_read */ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, uint8_t *buf) { struct nand_chip *chip = mtd->priv; int ret; /* Do not allow reads past end of device */ if ((from + len) > mtd->size) return -EINVAL; if (!len) return 0; nand_get_device(chip, mtd, FL_READING); chip->ops.len = len; chip->ops.datbuf = buf; chip->ops.oobbuf = NULL; ret = nand_do_read_ops(mtd, from, &chip->ops); *retlen = chip->ops.retlen; nand_release_device(mtd); return ret; } /** * nand_read_oob_std - [REPLACABLE] the most common OOB data read function * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to read * @sndcmd: flag whether to issue read command or not */ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) { if (sndcmd) { chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); sndcmd = 0; } chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return sndcmd; } /** * nand_read_oob_syndrome - [REPLACABLE] OOB data read function for HW ECC * with syndromes * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to read * @sndcmd: flag whether to issue read command or not */ static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) { uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size; uint8_t *bufpoi = buf; int i, toread, sndrnd = 0, pos; chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); for (i = 0; i < chip->ecc.steps; i++) { if (sndrnd) { pos = eccsize + i * (eccsize + chunk); if (mtd->writesize > 512) chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1); else chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page); } else sndrnd = 1; toread = min_t(int, length, chunk); chip->read_buf(mtd, bufpoi, toread); bufpoi += toread; length -= toread; } if (length > 0) chip->read_buf(mtd, bufpoi, length); return 1; } /** * nand_write_oob_std - [REPLACABLE] the most common OOB data write function * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to write */ static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page) { int status = 0; const uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); chip->write_buf(mtd, buf, length); /* Send command to program the OOB data */ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); return status & NAND_STATUS_FAIL ? -EIO : 0; } /** * nand_write_oob_syndrome - [REPLACABLE] OOB data write function for HW ECC * with syndrome - only for large page flash ! * @mtd: mtd info structure * @chip: nand chip info structure * @page: page number to write */ static int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page) { int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size, length = mtd->oobsize; int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; const uint8_t *bufpoi = chip->oob_poi; /* * data-ecc-data-ecc ... ecc-oob * or * data-pad-ecc-pad-data-pad .... ecc-pad-oob */ if (!chip->ecc.prepad && !chip->ecc.postpad) { pos = steps * (eccsize + chunk); steps = 0; } else pos = eccsize; chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); for (i = 0; i < steps; i++) { if (sndcmd) { if (mtd->writesize <= 512) { uint32_t fill = 0xFFFFFFFF; len = eccsize; while (len > 0) { int num = min_t(int, len, 4); chip->write_buf(mtd, (uint8_t *)&fill, num); len -= num; } } else { pos = eccsize + i * (eccsize + chunk); chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1); } } else sndcmd = 1; len = min_t(int, length, chunk); chip->write_buf(mtd, bufpoi, len); bufpoi += len; length -= len; } if (length > 0) chip->write_buf(mtd, bufpoi, length); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); return status & NAND_STATUS_FAIL ? -EIO : 0; } /** * nand_do_read_oob - [Intern] NAND read out-of-band * @mtd: MTD device structure * @from: offset to read from * @ops: oob operations description structure * * NAND read out-of-band data from the spare area */ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int page, realpage, chipnr, sndcmd = 1; struct nand_chip *chip = mtd->priv; int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; int readlen = ops->ooblen; int len; uint8_t *buf = ops->oobbuf; DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n", (unsigned long long)from, readlen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; else len = mtd->oobsize; if (unlikely(ops->ooboffs >= len)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt to start read outside oob\n"); return -EINVAL; } /* Do not allow reads past end of device */ if (unlikely(from >= mtd->size || ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) - (from >> chip->page_shift)) * len)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt read beyond end of device\n"); return -EINVAL; } chipnr = (int)(from >> chip->chip_shift); chip->select_chip(mtd, chipnr); /* Shift to get page */ realpage = (int)(from >> chip->page_shift); page = realpage & chip->pagemask; while(1) { sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd); len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); if (!(chip->options & NAND_NO_READRDY)) { /* * Apply delay or wait for ready/busy pin. Do this * before the AUTOINCR check, so no problems arise if a * chip which does auto increment is marked as * NOAUTOINCR by the board driver. */ if (!chip->dev_ready) udelay(chip->chip_delay); else nand_wait_ready(mtd); } readlen -= len; if (!readlen) break; /* Increment page address */ realpage++; page = realpage & chip->pagemask; /* Check, if we cross a chip boundary */ if (!page) { chipnr++; chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } /* Check, if the chip supports auto page increment * or if we have hit a block boundary. */ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) sndcmd = 1; } ops->oobretlen = ops->ooblen; return 0; } /** * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band * @mtd: MTD device structure * @from: offset to read from * @ops: oob operation description structure * * NAND read data and/or out-of-band data */ static int nand_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { struct nand_chip *chip = mtd->priv; int ret = -ENOTSUPP; ops->retlen = 0; /* Do not allow reads past end of device */ if (ops->datbuf && (from + ops->len) > mtd->size) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt read beyond end of device\n"); return -EINVAL; } nand_get_device(chip, mtd, FL_READING); switch(ops->mode) { case MTD_OOB_PLACE: case MTD_OOB_AUTO: case MTD_OOB_RAW: break; default: goto out; } if (!ops->datbuf) ret = nand_do_read_oob(mtd, from, ops); else ret = nand_do_read_ops(mtd, from, ops); out: nand_release_device(mtd); return ret; } /** * nand_write_page_raw - [Intern] raw page write function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer */ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { chip->write_buf(mtd, buf, mtd->writesize); chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); } /** * nand_write_page_swecc - [REPLACABLE] software ecc based page write function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer */ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *ecc_calc = chip->buffers->ecccalc; const uint8_t *p = buf; uint32_t *eccpos = chip->ecc.layout->eccpos; /* Software ecc calculation */ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); for (i = 0; i < chip->ecc.total; i++) chip->oob_poi[eccpos[i]] = ecc_calc[i]; chip->ecc.write_page_raw(mtd, chip, buf); } /** * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer */ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; uint8_t *ecc_calc = chip->buffers->ecccalc; const uint8_t *p = buf; uint32_t *eccpos = chip->ecc.layout->eccpos; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { chip->ecc.hwctl(mtd, NAND_ECC_WRITE); chip->write_buf(mtd, p, eccsize); chip->ecc.calculate(mtd, p, &ecc_calc[i]); } for (i = 0; i < chip->ecc.total; i++) chip->oob_poi[eccpos[i]] = ecc_calc[i]; chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); } /** * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. */ static void nand_write_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; int eccsteps = chip->ecc.steps; const uint8_t *p = buf; uint8_t *oob = chip->oob_poi; for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { chip->ecc.hwctl(mtd, NAND_ECC_WRITE); chip->write_buf(mtd, p, eccsize); if (chip->ecc.prepad) { chip->write_buf(mtd, oob, chip->ecc.prepad); oob += chip->ecc.prepad; } chip->ecc.calculate(mtd, p, oob); chip->write_buf(mtd, oob, eccbytes); oob += eccbytes; if (chip->ecc.postpad) { chip->write_buf(mtd, oob, chip->ecc.postpad); oob += chip->ecc.postpad; } } /* Calculate remaining oob bytes */ i = mtd->oobsize - (oob - chip->oob_poi); if (i) chip->write_buf(mtd, oob, i); } /** * nand_write_page - [REPLACEABLE] write one page * @mtd: MTD device structure * @chip: NAND chip descriptor * @buf: the data to write * @page: page number to write * @cached: cached programming * @raw: use _raw version of write_page */ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int page, int cached, int raw) { int status; chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) chip->ecc.write_page_raw(mtd, chip, buf); else chip->ecc.write_page(mtd, chip, buf); /* * Cached progamming disabled for now, Not sure if its worth the * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s) */ cached = 0; if (!cached || !(chip->options & NAND_CACHEPRG)) { chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); /* * See if operation failed and additional status checks are * available */ if ((status & NAND_STATUS_FAIL) && (chip->errstat)) status = chip->errstat(mtd, chip, FL_WRITING, status, page); if (status & NAND_STATUS_FAIL) return -EIO; } else { chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); status = chip->waitfunc(mtd, chip); } #ifdef CONFIG_MTD_NAND_VERIFY_WRITE /* Send command to read back the data */ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); if (chip->verify_buf(mtd, buf, mtd->writesize)) return -EIO; #endif return 0; } /** * nand_fill_oob - [Internal] Transfer client buffer to oob * @chip: nand chip structure * @oob: oob data buffer * @ops: oob ops structure */ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, struct mtd_oob_ops *ops) { size_t len = ops->ooblen; switch(ops->mode) { case MTD_OOB_PLACE: case MTD_OOB_RAW: memcpy(chip->oob_poi + ops->ooboffs, oob, len); return oob + len; case MTD_OOB_AUTO: { struct nand_oobfree *free = chip->ecc.layout->oobfree; uint32_t boffs = 0, woffs = ops->ooboffs; size_t bytes = 0; for(; free->length && len; free++, len -= bytes) { /* Write request not from offset 0 ? */ if (unlikely(woffs)) { if (woffs >= free->length) { woffs -= free->length; continue; } boffs = free->offset + woffs; bytes = min_t(size_t, len, (free->length - woffs)); woffs = 0; } else { bytes = min_t(size_t, len, free->length); boffs = free->offset; } memcpy(chip->oob_poi + boffs, oob, bytes); oob += bytes; } return oob; } default: BUG(); } return NULL; } #define NOTALIGNED(x) (x & (chip->subpagesize - 1)) != 0 /** * nand_do_write_ops - [Internal] NAND write with ECC * @mtd: MTD device structure * @to: offset to write to * @ops: oob operations description structure * * NAND write with ECC */ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { int chipnr, realpage, page, blockmask, column; struct nand_chip *chip = mtd->priv; uint32_t writelen = ops->len; uint8_t *oob = ops->oobbuf; uint8_t *buf = ops->datbuf; int ret, subpage; ops->retlen = 0; if (!writelen) return 0; /* reject writes, which are not page aligned */ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { printk(KERN_NOTICE "nand_write: " "Attempt to write not page aligned data\n"); return -EINVAL; } column = to & (mtd->writesize - 1); subpage = column || (writelen & (mtd->writesize - 1)); if (subpage && oob) return -EINVAL; chipnr = (int)(to >> chip->chip_shift); chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) return -EIO; realpage = (int)(to >> chip->page_shift); page = realpage & chip->pagemask; blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; /* Invalidate the page cache, when we write to the cached page */ if (to <= (chip->pagebuf << chip->page_shift) && (chip->pagebuf << chip->page_shift) < (to + ops->len)) chip->pagebuf = -1; /* If we're not given explicit OOB data, let it be 0xFF */ if (likely(!oob)) memset(chip->oob_poi, 0xff, mtd->oobsize); while(1) { int bytes = mtd->writesize; int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; /* Partial page write ? */ if (unlikely(column || writelen < (mtd->writesize - 1))) { cached = 0; bytes = min_t(int, bytes - column, (int) writelen); chip->pagebuf = -1; memset(chip->buffers->databuf, 0xff, mtd->writesize); memcpy(&chip->buffers->databuf[column], buf, bytes); wbuf = chip->buffers->databuf; } if (unlikely(oob)) oob = nand_fill_oob(chip, oob, ops); ret = chip->write_page(mtd, chip, wbuf, page, cached, (ops->mode == MTD_OOB_RAW)); if (ret) break; writelen -= bytes; if (!writelen) break; column = 0; buf += bytes; realpage++; page = realpage & chip->pagemask; /* Check, if we cross a chip boundary */ if (!page) { chipnr++; chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); } } ops->retlen = ops->len - writelen; if (unlikely(oob)) ops->oobretlen = ops->ooblen; return ret; } /** * nand_write - [MTD Interface] NAND write with ECC * @mtd: MTD device structure * @to: offset to write to * @len: number of bytes to write * @retlen: pointer to variable to store the number of written bytes * @buf: the data to write * * NAND write with ECC */ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf) { struct nand_chip *chip = mtd->priv; int ret; /* Do not allow reads past end of device */ if ((to + len) > mtd->size) return -EINVAL; if (!len) return 0; nand_get_device(chip, mtd, FL_WRITING); chip->ops.len = len; chip->ops.datbuf = (uint8_t *)buf; chip->ops.oobbuf = NULL; ret = nand_do_write_ops(mtd, to, &chip->ops); *retlen = chip->ops.retlen; nand_release_device(mtd); return ret; } /** * nand_do_write_oob - [MTD Interface] NAND write out-of-band * @mtd: MTD device structure * @to: offset to write to * @ops: oob operation description structure * * NAND write out-of-band */ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { int chipnr, page, status, len; struct nand_chip *chip = mtd->priv; DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int)to, (int)ops->ooblen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; else len = mtd->oobsize; /* Do not allow write past end of page */ if ((ops->ooboffs + ops->ooblen) > len) { DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " "Attempt to write past end of page\n"); return -EINVAL; } if (unlikely(ops->ooboffs >= len)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt to start write outside oob\n"); return -EINVAL; } /* Do not allow reads past end of device */ if (unlikely(to >= mtd->size || ops->ooboffs + ops->ooblen > ((mtd->size >> chip->page_shift) - (to >> chip->page_shift)) * len)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt write beyond end of device\n"); return -EINVAL; } chipnr = (int)(to >> chip->chip_shift); chip->select_chip(mtd, chipnr); /* Shift to get page */ page = (int)(to >> chip->page_shift); /* * Reset the chip. Some chips (like the Toshiba TC5832DC found in one * of my DiskOnChip 2000 test units) will clear the whole data page too * if we don't do this. I have no clue why, but I seem to have 'fixed' * it in the doc2000 driver in August 1999. dwmw2. */ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); /* Check, if it is write protected */ if (nand_check_wp(mtd)) return -EROFS; /* Invalidate the page cache, if we write to the cached page */ if (page == chip->pagebuf) chip->pagebuf = -1; memset(chip->oob_poi, 0xff, mtd->oobsize); nand_fill_oob(chip, ops->oobbuf, ops); status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); memset(chip->oob_poi, 0xff, mtd->oobsize); if (status) return status; ops->oobretlen = ops->ooblen; return 0; } /** * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band * @mtd: MTD device structure * @to: offset to write to * @ops: oob operation description structure */ static int nand_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { struct nand_chip *chip = mtd->priv; int ret = -ENOTSUPP; ops->retlen = 0; /* Do not allow writes past end of device */ if (ops->datbuf && (to + ops->len) > mtd->size) { DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " "Attempt read beyond end of device\n"); return -EINVAL; } nand_get_device(chip, mtd, FL_WRITING); switch(ops->mode) { case MTD_OOB_PLACE: case MTD_OOB_AUTO: case MTD_OOB_RAW: break; default: goto out; } if (!ops->datbuf) ret = nand_do_write_oob(mtd, to, ops); else ret = nand_do_write_ops(mtd, to, ops); out: nand_release_device(mtd); return ret; } /** * single_erease_cmd - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * * Standard erase command for NAND chips */ static void single_erase_cmd(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); } /** * multi_erease_cmd - [GENERIC] AND specific block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * * AND multi block erase command function * Erase 4 consecutive blocks */ static void multi_erase_cmd(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); } /** * nand_erase - [MTD Interface] erase block(s) * @mtd: MTD device structure * @instr: erase instruction * * Erase one ore more blocks */ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) { return nand_erase_nand(mtd, instr, 0); } #define BBT_PAGE_MASK 0xffffff3f /** * nand_erase_nand - [Internal] erase block(s) * @mtd: MTD device structure * @instr: erase instruction * @allowbbt: allow erasing the bbt area * * Erase one ore more blocks */ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt) { int page, len, status, pages_per_block, ret, chipnr; struct nand_chip *chip = mtd->priv; int rewrite_bbt[NAND_MAX_CHIPS]={0}; unsigned int bbt_masked_page = 0xffffffff; DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n", (unsigned int)instr->addr, (unsigned int)instr->len); /* Start address must align on block boundary */ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); return -EINVAL; } /* Length must align on block boundary */ if (instr->len & ((1 << chip->phys_erase_shift) - 1)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " "Length not block aligned\n"); return -EINVAL; } /* Do not allow erase past end of device */ if ((instr->len + instr->addr) > mtd->size) { DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " "Erase past end of device\n"); return -EINVAL; } instr->fail_addr = 0xffffffff; /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_ERASING); /* Shift to get first page */ page = (int)(instr->addr >> chip->page_shift); chipnr = (int)(instr->addr >> chip->chip_shift); /* Calculate pages in each block */ pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); /* Select the NAND device */ chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " "Device is write protected!!!\n"); instr->state = MTD_ERASE_FAILED; goto erase_exit; } /* * If BBT requires refresh, set the BBT page mask to see if the BBT * should be rewritten. Otherwise the mask is set to 0xffffffff which * can not be matched. This is also done when the bbt is actually * erased to avoid recusrsive updates */ if (chip->options & BBT_AUTO_REFRESH && !allowbbt) bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK; /* Loop through the pages */ len = instr->len; instr->state = MTD_ERASING; while (len) { /* * heck if we have a bad block, we do not erase bad blocks ! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { printk(KERN_WARNING "nand_erase: attempt to erase a " "bad block at page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; goto erase_exit; } /* * Invalidate the page cache, if we erase the block which * contains the current cached page */ if (page <= chip->pagebuf && chip->pagebuf < (page + pages_per_block)) chip->pagebuf = -1; chip->erase_cmd(mtd, page & chip->pagemask); status = chip->waitfunc(mtd, chip); /* * See if operation failed and additional status checks are * available */ if ((status & NAND_STATUS_FAIL) && (chip->errstat)) status = chip->errstat(mtd, chip, FL_ERASING, status, page); /* See if block erase succeeded */ if (status & NAND_STATUS_FAIL) { DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; instr->fail_addr = (page << chip->page_shift); goto erase_exit; } /* * If BBT requires refresh, set the BBT rewrite flag to the * page being erased */ if (bbt_masked_page != 0xffffffff && (page & BBT_PAGE_MASK) == bbt_masked_page) rewrite_bbt[chipnr] = (page << chip->page_shift); /* Increment page address and decrement length */ len -= (1 << chip->phys_erase_shift); page += pages_per_block; /* Check, if we cross a chip boundary */ if (len && !(page & chip->pagemask)) { chipnr++; chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); /* * If BBT requires refresh and BBT-PERCHIP, set the BBT * page mask to see if this BBT should be rewritten */ if (bbt_masked_page != 0xffffffff && (chip->bbt_td->options & NAND_BBT_PERCHIP)) bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK; } } instr->state = MTD_ERASE_DONE; erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); /* Do call back function */ if (!ret) mtd_erase_callback(instr); /* * If BBT requires refresh and erase was successful, rewrite any * selected bad block tables */ if (bbt_masked_page == 0xffffffff || ret) return ret; for (chipnr = 0; chipnr < chip->numchips; chipnr++) { if (!rewrite_bbt[chipnr]) continue; /* update the BBT for chip */ DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt " "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]); nand_update_bbt(mtd, rewrite_bbt[chipnr]); } /* Return more or less happy */ return ret; } /** * nand_sync - [MTD Interface] sync * @mtd: MTD device structure * * Sync is actually a wait for chip ready function */ static void nand_sync(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n"); /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_SYNCING); /* Release it and go back */ nand_release_device(mtd); } /** * nand_block_isbad - [MTD Interface] Check if block at offset is bad * @mtd: MTD device structure * @offs: offset relative to mtd start */ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) { /* Check for invalid offset */ if (offs > mtd->size) return -EINVAL; return nand_block_checkbad(mtd, offs, 1, 0); } /** * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad * @mtd: MTD device structure * @ofs: offset relative to mtd start */ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; int ret; if ((ret = nand_block_isbad(mtd, ofs))) { /* If it was bad already, return success and do nothing. */ if (ret > 0) return 0; return ret; } return chip->block_markbad(mtd, ofs); } /** * nand_suspend - [MTD Interface] Suspend the NAND flash * @mtd: MTD device structure */ static int nand_suspend(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; return nand_get_device(chip, mtd, FL_PM_SUSPENDED); } /** * nand_resume - [MTD Interface] Resume the NAND flash * @mtd: MTD device structure */ static void nand_resume(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; if (chip->state == FL_PM_SUSPENDED) nand_release_device(mtd); else printk(KERN_ERR "nand_resume() called for a chip which is not " "in suspended state\n"); } /* * Set default functions */ static void nand_set_defaults(struct nand_chip *chip, int busw) { /* check for proper chip_delay setup, set 20us if not */ if (!chip->chip_delay) chip->chip_delay = 20; /* check, if a user supplied command function given */ if (chip->cmdfunc == NULL) chip->cmdfunc = nand_command; /* check, if a user supplied wait function given */ if (chip->waitfunc == NULL) chip->waitfunc = nand_wait; if (!chip->select_chip) chip->select_chip = nand_select_chip; if (!chip->read_byte) chip->read_byte = busw ? nand_read_byte16 : nand_read_byte; if (!chip->read_word) chip->read_word = nand_read_word; if (!chip->block_bad) chip->block_bad = nand_block_bad; if (!chip->block_markbad) chip->block_markbad = nand_default_block_markbad; if (!chip->write_buf) chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; if (!chip->read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; if (!chip->verify_buf) chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; if (!chip->controller) { chip->controller = &chip->hwcontrol; spin_lock_init(&chip->controller->lock); init_waitqueue_head(&chip->controller->wq); } } /* * Get the flash and manufacturer id and lookup if the type is supported */ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip, int busw, int *maf_id) { struct nand_flash_dev *type = NULL; int i, dev_id, maf_idx; /* Select the device */ chip->select_chip(mtd, 0); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ *maf_id = chip->read_byte(mtd); dev_id = chip->read_byte(mtd); /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (dev_id == nand_flash_ids[i].id) { type = &nand_flash_ids[i]; break; } } if (!type) return ERR_PTR(-ENODEV); if (!mtd->name) mtd->name = type->name; chip->chipsize = type->chipsize << 20; /* Newer devices have all the information in additional id bytes */ if (!type->pagesize) { int extid; /* The 3rd id byte holds MLC / multichip data */ chip->cellinfo = chip->read_byte(mtd); /* The 4th id byte is the important one */ extid = chip->read_byte(mtd); /* Calc pagesize */ mtd->writesize = 1024 << (extid & 0x3); extid >>= 2; /* Calc oobsize */ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9); extid >>= 2; /* Calc blocksize. Blocksize is multiples of 64KiB */ mtd->erasesize = (64 * 1024) << (extid & 0x03); extid >>= 2; /* Get buswidth information */ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; } else { /* * Old devices have chip data hardcoded in the device id table */ mtd->erasesize = type->erasesize; mtd->writesize = type->pagesize; mtd->oobsize = mtd->writesize / 32; busw = type->options & NAND_BUSWIDTH_16; } /* Try to identify manufacturer */ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) { if (nand_manuf_ids[maf_idx].id == *maf_id) break; } /* * Check, if buswidth is correct. Hardware drivers should set * chip correct ! */ if (busw != (chip->options & NAND_BUSWIDTH_16)) { printk(KERN_INFO "NAND device: Manufacturer ID:" " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, nand_manuf_ids[maf_idx].name, mtd->name); printk(KERN_WARNING "NAND bus width %d instead %d bit\n", (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, busw ? 16 : 8); return ERR_PTR(-EINVAL); } /* Calculate the address shift from the page size */ chip->page_shift = ffs(mtd->writesize) - 1; /* Convert chipsize to number of pages per chip -1. */ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1; chip->bbt_erase_shift = chip->phys_erase_shift = ffs(mtd->erasesize) - 1; chip->chip_shift = ffs(chip->chipsize) - 1; /* Set the bad block position */ chip->badblockpos = mtd->writesize > 512 ? NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; /* Get chip options, preserve non chip based options */ chip->options &= ~NAND_CHIPOPTIONS_MSK; chip->options |= type->options & NAND_CHIPOPTIONS_MSK; /* * Set chip as a default. Board drivers can override it, if necessary */ chip->options |= NAND_NO_AUTOINCR; /* Check if chip is a not a samsung device. Do not clear the * options for chips which are not having an extended id. */ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize) chip->options &= ~NAND_SAMSUNG_LP_OPTIONS; /* Check for AND chips with 4 page planes */ if (chip->options & NAND_4PAGE_ARRAY) chip->erase_cmd = multi_erase_cmd; else chip->erase_cmd = single_erase_cmd; /* Do not replace user supplied command function ! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; printk(KERN_INFO "NAND device: Manufacturer ID:" " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, nand_manuf_ids[maf_idx].name, type->name); return type; } /** * nand_scan_ident - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure * @maxchips: Number of chips to scan for * * This is the first phase of the normal nand_scan() function. It * reads the flash ID and sets up MTD fields accordingly. * * The mtd->owner field must be set to the module of the caller. */ int nand_scan_ident(struct mtd_info *mtd, int maxchips) { int i, busw, nand_maf_id; struct nand_chip *chip = mtd->priv; struct nand_flash_dev *type; /* Get buswidth to select the correct functions */ busw = chip->options & NAND_BUSWIDTH_16; /* Set the default functions */ nand_set_defaults(chip, busw); /* Read the flash type */ type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id); if (IS_ERR(type)) { printk(KERN_WARNING "No NAND device found!!!\n"); chip->select_chip(mtd, -1); return PTR_ERR(type); } /* Check for a chip array */ for (i = 1; i < maxchips; i++) { chip->select_chip(mtd, i); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ if (nand_maf_id != chip->read_byte(mtd) || type->id != chip->read_byte(mtd)) break; } if (i > 1) printk(KERN_INFO "%d NAND chips detected\n", i); /* Store the number of chips and calc total size for mtd */ chip->numchips = i; mtd->size = i * chip->chipsize; return 0; } /** * nand_scan_tail - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure * @maxchips: Number of chips to scan for * * This is the second phase of the normal nand_scan() function. It * fills out all the uninitialized function pointers with the defaults * and scans for a bad block table if appropriate. */ int nand_scan_tail(struct mtd_info *mtd) { int i; struct nand_chip *chip = mtd->priv; if (!(chip->options & NAND_OWN_BUFFERS)) chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); if (!chip->buffers) return -ENOMEM; /* Set the internal oob buffer location, just after the page data */ chip->oob_poi = chip->buffers->databuf + mtd->writesize; /* * If no default placement scheme is given, select an appropriate one */ if (!chip->ecc.layout) { switch (mtd->oobsize) { case 8: chip->ecc.layout = &nand_oob_8; break; case 16: chip->ecc.layout = &nand_oob_16; break; case 64: chip->ecc.layout = &nand_oob_64; break; default: printk(KERN_WARNING "No oob scheme defined for " "oobsize %d\n", mtd->oobsize); BUG(); } } if (!chip->write_page) chip->write_page = nand_write_page; /* * check ECC mode, default to software if 3byte/512byte hardware ECC is * selected and we have 256 byte pagesize fallback to software ECC */ if (!chip->ecc.read_page_raw) chip->ecc.read_page_raw = nand_read_page_raw; if (!chip->ecc.write_page_raw) chip->ecc.write_page_raw = nand_write_page_raw; switch (chip->ecc.mode) { case NAND_ECC_HW: /* Use standard hwecc read page function ? */ if (!chip->ecc.read_page) chip->ecc.read_page = nand_read_page_hwecc; if (!chip->ecc.write_page) chip->ecc.write_page = nand_write_page_hwecc; if (!chip->ecc.read_oob) chip->ecc.read_oob = nand_read_oob_std; if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_std; case NAND_ECC_HW_SYNDROME: if ((!chip->ecc.calculate || !chip->ecc.correct || !chip->ecc.hwctl) && (!chip->ecc.read_page || chip->ecc.read_page == nand_read_page_hwecc) || !chip->ecc.write_page || chip->ecc.write_page == nand_write_page_hwecc) { printk(KERN_WARNING "No ECC functions supplied, " "Hardware ECC not possible\n"); BUG(); } /* Use standard syndrome read/write page function ? */ if (!chip->ecc.read_page) chip->ecc.read_page = nand_read_page_syndrome; if (!chip->ecc.write_page) chip->ecc.write_page = nand_write_page_syndrome; if (!chip->ecc.read_oob) chip->ecc.read_oob = nand_read_oob_syndrome; if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_syndrome; if (mtd->writesize >= chip->ecc.size) break; printk(KERN_WARNING "%d byte HW ECC not possible on " "%d byte page size, fallback to SW ECC\n", chip->ecc.size, mtd->writesize); chip->ecc.mode = NAND_ECC_SOFT; case NAND_ECC_SOFT: chip->ecc.calculate = nand_calculate_ecc; chip->ecc.correct = nand_correct_data; chip->ecc.read_page = nand_read_page_swecc; chip->ecc.write_page = nand_write_page_swecc; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = 256; chip->ecc.bytes = 3; break; case NAND_ECC_NONE: printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. " "This is not recommended !!\n"); chip->ecc.read_page = nand_read_page_raw; chip->ecc.write_page = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = mtd->writesize; chip->ecc.bytes = 0; break; default: printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n", chip->ecc.mode); BUG(); } /* * The number of bytes available for a client to place data into * the out of band area */ chip->ecc.layout->oobavail = 0; for (i = 0; chip->ecc.layout->oobfree[i].length; i++) chip->ecc.layout->oobavail += chip->ecc.layout->oobfree[i].length; mtd->oobavail = chip->ecc.layout->oobavail; /* * Set the number of read / write steps for one page depending on ECC * mode */ chip->ecc.steps = mtd->writesize / chip->ecc.size; if(chip->ecc.steps * chip->ecc.size != mtd->writesize) { printk(KERN_WARNING "Invalid ecc parameters\n"); BUG(); } chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; /* * Allow subpage writes up to ecc.steps. Not possible for MLC * FLASH. */ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { switch(chip->ecc.steps) { case 2: mtd->subpage_sft = 1; break; case 4: case 8: mtd->subpage_sft = 2; break; } } chip->subpagesize = mtd->writesize >> mtd->subpage_sft; /* Initialize state */ chip->state = FL_READY; /* De-select the device */ chip->select_chip(mtd, -1); /* Invalidate the pagebuffer reference */ chip->pagebuf = -1; /* Fill in remaining MTD driver data */ mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; mtd->erase = nand_erase; mtd->point = NULL; mtd->unpoint = NULL; mtd->read = nand_read; mtd->write = nand_write; mtd->read_oob = nand_read_oob; mtd->write_oob = nand_write_oob; mtd->sync = nand_sync; mtd->lock = NULL; mtd->unlock = NULL; mtd->suspend = nand_suspend; mtd->resume = nand_resume; mtd->block_isbad = nand_block_isbad; mtd->block_markbad = nand_block_markbad; /* propagate ecc.layout to mtd_info */ mtd->ecclayout = chip->ecc.layout; /* Check, if we should skip the bad block table scan */ if (chip->options & NAND_SKIP_BBTSCAN) return 0; /* Build bad block table */ return chip->scan_bbt(mtd); } /* module_text_address() isn't exported, and it's mostly a pointless test if this is a module _anyway_ -- they'd have to try _really_ hard to call us from in-kernel code if the core NAND support is modular. */ #ifdef MODULE #define caller_is_module() (1) #else #define caller_is_module() \ module_text_address((unsigned long)__builtin_return_address(0)) #endif /** * nand_scan - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure * @maxchips: Number of chips to scan for * * This fills out all the uninitialized function pointers * with the defaults. * The flash ID is read and the mtd/chip structures are * filled with the appropriate values. * The mtd->owner field must be set to the module of the caller * */ int nand_scan(struct mtd_info *mtd, int maxchips) { int ret; /* Many callers got this wrong, so check for it for a while... */ if (!mtd->owner && caller_is_module()) { printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n"); BUG(); } ret = nand_scan_ident(mtd, maxchips); if (!ret) ret = nand_scan_tail(mtd); return ret; } /** * nand_release - [NAND Interface] Free resources held by the NAND device * @mtd: MTD device structure */ void nand_release(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; #ifdef CONFIG_MTD_PARTITIONS /* Deregister partitions */ del_mtd_partitions(mtd); #endif /* Deregister the device */ del_mtd_device(mtd); /* Free bad block table memory */ kfree(chip->bbt); if (!(chip->options & NAND_OWN_BUFFERS)) kfree(chip->buffers); } EXPORT_SYMBOL_GPL(nand_scan); EXPORT_SYMBOL_GPL(nand_scan_ident); EXPORT_SYMBOL_GPL(nand_scan_tail); EXPORT_SYMBOL_GPL(nand_release); static int __init nand_base_init(void) { led_trigger_register_simple("nand-disk", &nand_led_trigger); return 0; } static void __exit nand_base_exit(void) { led_trigger_unregister_simple(nand_led_trigger); } module_init(nand_base_init); module_exit(nand_base_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steven J. Hill , Thomas Gleixner "); MODULE_DESCRIPTION("Generic NAND flash driver code");