#ifndef _SPARC64_HYPERVISOR_H #define _SPARC64_HYPERVISOR_H /* Sun4v hypervisor interfaces and defines. * * Hypervisor calls are made via traps to software traps number 0x80 * and above. Registers %o0 to %o5 serve as argument, status, and * return value registers. * * There are two kinds of these traps. First there are the normal * "fast traps" which use software trap 0x80 and encode the function * to invoke by number in register %o5. Argument and return value * handling is as follows: * * ----------------------------------------------- * | %o5 | function number | undefined | * | %o0 | argument 0 | return status | * | %o1 | argument 1 | return value 1 | * | %o2 | argument 2 | return value 2 | * | %o3 | argument 3 | return value 3 | * | %o4 | argument 4 | return value 4 | * ----------------------------------------------- * * The second type are "hyper-fast traps" which encode the function * number in the software trap number itself. So these use trap * numbers > 0x80. The register usage for hyper-fast traps is as * follows: * * ----------------------------------------------- * | %o0 | argument 0 | return status | * | %o1 | argument 1 | return value 1 | * | %o2 | argument 2 | return value 2 | * | %o3 | argument 3 | return value 3 | * | %o4 | argument 4 | return value 4 | * ----------------------------------------------- * * Registers providing explicit arguments to the hypervisor calls * are volatile across the call. Upon return their values are * undefined unless explicitly specified as containing a particular * return value by the specific call. The return status is always * returned in register %o0, zero indicates a successful execution of * the hypervisor call and other values indicate an error status as * defined below. So, for example, if a hyper-fast trap takes * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across * the call and %o3, %o4, and %o5 would be preserved. * * If the hypervisor trap is invalid, or the fast trap function number * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits * of the argument and return values are significant. */ /* Trap numbers. */ #define HV_FAST_TRAP 0x80 #define HV_MMU_MAP_ADDR_TRAP 0x83 #define HV_MMU_UNMAP_ADDR_TRAP 0x84 #define HV_TTRACE_ADDENTRY_TRAP 0x85 #define HV_CORE_TRAP 0xff /* Error codes. */ #define HV_EOK 0 /* Successful return */ #define HV_ENOCPU 1 /* Invalid CPU id */ #define HV_ENORADDR 2 /* Invalid real address */ #define HV_ENOINTR 3 /* Invalid interrupt id */ #define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ #define HV_EBADTSB 5 /* Invalid TSB description */ #define HV_EINVAL 6 /* Invalid argument */ #define HV_EBADTRAP 7 /* Invalid function number */ #define HV_EBADALIGN 8 /* Invalid address alignment */ #define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ #define HV_ENOACCESS 10 /* No access to resource */ #define HV_EIO 11 /* I/O error */ #define HV_ECPUERROR 12 /* CPU in error state */ #define HV_ENOTSUPPORTED 13 /* Function not supported */ #define HV_ENOMAP 14 /* No mapping found */ #define HV_ETOOMANY 15 /* Too many items specified */ #define HV_ECHANNEL 16 /* Invalid LDC channel */ #define HV_EBUSY 17 /* Resource busy */ /* mach_exit() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_EXIT * ARG0: exit code * ERRORS: This service does not return. * * Stop all CPUs in the virtual domain and place them into the stopped * state. The 64-bit exit code may be passed to a service entity as * the domain's exit status. On systems without a service entity, the * domain will undergo a reset, and the boot firmware will be * reloaded. * * This function will never return to the guest that invokes it. * * Note: By convention an exit code of zero denotes a successful exit by * the guest code. A non-zero exit code denotes a guest specific * error indication. * */ #define HV_FAST_MACH_EXIT 0x00 #ifndef __ASSEMBLY__ extern void sun4v_mach_exit(unsigned long exit_code); #endif /* Domain services. */ /* mach_desc() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_DESC * ARG0: buffer * ARG1: length * RET0: status * RET1: length * ERRORS: HV_EBADALIGN Buffer is badly aligned * HV_ENORADDR Buffer is to an illegal real address. * HV_EINVAL Buffer length is too small for complete * machine description. * * Copy the most current machine description into the buffer indicated * by the real address in ARG0. The buffer provided must be 16 byte * aligned. Upon success or HV_EINVAL, this service returns the * actual size of the machine description in the RET1 return value. * * Note: A method of determining the appropriate buffer size for the * machine description is to first call this service with a buffer * length of 0 bytes. */ #define HV_FAST_MACH_DESC 0x01 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, unsigned long buf_len, unsigned long *real_buf_len); #endif /* mach_sir() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_SIR * ERRORS: This service does not return. * * Perform a software initiated reset of the virtual machine domain. * All CPUs are captured as soon as possible, all hardware devices are * returned to the entry default state, and the domain is restarted at * the SIR (trap type 0x04) real trap table (RTBA) entry point on one * of the CPUs. The single CPU restarted is selected as determined by * platform specific policy. Memory is preserved across this * operation. */ #define HV_FAST_MACH_SIR 0x02 #ifndef __ASSEMBLY__ extern void sun4v_mach_sir(void); #endif /* mach_set_watchdog() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_SET_WATCHDOG * ARG0: timeout in milliseconds * RET0: status * RET1: time remaining in milliseconds * * A guest uses this API to set a watchdog timer. Once the gues has set * the timer, it must call the timer service again either to disable or * postpone the expiration. If the timer expires before being reset or * disabled, then the hypervisor take a platform specific action leading * to guest termination within a bounded time period. The platform action * may include recovery actions such as reporting the expiration to a * Service Processor, and/or automatically restarting the gues. * * The 'timeout' parameter is specified in milliseconds, however the * implementated granularity is given by the 'watchdog-resolution' * property in the 'platform' node of the guest's machine description. * The largest allowed timeout value is specified by the * 'watchdog-max-timeout' property of the 'platform' node. * * If the 'timeout' argument is not zero, the watchdog timer is set to * expire after a minimum of 'timeout' milliseconds. * * If the 'timeout' argument is zero, the watchdog timer is disabled. * * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' * property, the hypervisor leaves the watchdog timer state unchanged, * and returns a status of EINVAL. * * The 'time remaining' return value is valid regardless of whether the * return status is EOK or EINVAL. A non-zero return value indicates the * number of milliseconds that were remaining until the timer was to expire. * If less than one millisecond remains, the return value is '1'. If the * watchdog timer was disabled at the time of the call, the return value is * zero. * * If the hypervisor cannot support the exact timeout value requested, but * can support a larger timeout value, the hypervisor may round the actual * timeout to a value larger than the requested timeout, consequently the * 'time remaining' return value may be larger than the previously requested * timeout value. * * Any guest OS debugger should be aware that the watchdog service may be in * use. Consequently, it is recommended that the watchdog service is * disabled upon debugger entry (e.g. reaching a breakpoint), and then * re-enabled upon returning to normal execution. The API has been designed * with this in mind, and the 'time remaining' result of the disable call may * be used directly as the timeout argument of the re-enable call. */ #define HV_FAST_MACH_SET_WATCHDOG 0x05 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, unsigned long *orig_timeout); #endif /* CPU services. * * CPUs represent devices that can execute software threads. A single * chip that contains multiple cores or strands is represented as * multiple CPUs with unique CPU identifiers. CPUs are exported to * OBP via the machine description (and to the OS via the OBP device * tree). CPUs are always in one of three states: stopped, running, * or error. * * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a * CPU within a logical domain. Operations that are to be performed * on multiple CPUs specify them via a CPU list. A CPU list is an * array in real memory, of which each 16-bit word is a CPU ID. CPU * lists are passed through the API as two arguments. The first is * the number of entries (16-bit words) in the CPU list, and the * second is the (real address) pointer to the CPU ID list. */ /* cpu_start() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_START * ARG0: CPU ID * ARG1: PC * ARG2: RTBA * ARG3: target ARG0 * RET0: status * ERRORS: ENOCPU Invalid CPU ID * EINVAL Target CPU ID is not in the stopped state * ENORADDR Invalid PC or RTBA real address * EBADALIGN Unaligned PC or unaligned RTBA * EWOULDBLOCK Starting resources are not available * * Start CPU with given CPU ID with PC in %pc and with a real trap * base address value of RTBA. The indicated CPU must be in the * stopped state. The supplied RTBA must be aligned on a 256 byte * boundary. On successful completion, the specified CPU will be in * the running state and will be supplied with "target ARG0" in %o0 * and RTBA in %tba. */ #define HV_FAST_CPU_START 0x10 #ifndef __ASSEMBLY__ extern unsigned long sun4v_cpu_start(unsigned long cpuid, unsigned long pc, unsigned long rtba, unsigned long arg0); #endif /* cpu_stop() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_STOP * ARG0: CPU ID * RET0: status * ERRORS: ENOCPU Invalid CPU ID * EINVAL Target CPU ID is the current cpu * EINVAL Target CPU ID is not in the running state * EWOULDBLOCK Stopping resources are not available * ENOTSUPPORTED Not supported on this platform * * The specified CPU is stopped. The indicated CPU must be in the * running state. On completion, it will be in the stopped state. It * is not legal to stop the current CPU. * * Note: As this service cannot be used to stop the current cpu, this service * may not be used to stop the last running CPU in a domain. To stop * and exit a running domain, a guest must use the mach_exit() service. */ #define HV_FAST_CPU_STOP 0x11 #ifndef __ASSEMBLY__ extern unsigned long sun4v_cpu_stop(unsigned long cpuid); #endif /* cpu_yield() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_YIELD * RET0: status * ERRORS: No possible error. * * Suspend execution on the current CPU. Execution will resume when * an interrupt (device, %stick_compare, or cross-call) is targeted to * the CPU. On some CPUs, this API may be used by the hypervisor to * save power by disabling hardware strands. */ #define HV_FAST_CPU_YIELD 0x12 #ifndef __ASSEMBLY__ extern unsigned long sun4v_cpu_yield(void); #endif /* cpu_qconf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_QCONF * ARG0: queue * ARG1: base real address * ARG2: number of entries * RET0: status * ERRORS: ENORADDR Invalid base real address * EINVAL Invalid queue or number of entries is less * than 2 or too large. * EBADALIGN Base real address is not correctly aligned * for size. * * Configure the given queue to be placed at the given base real * address, with the given number of entries. The number of entries * must be a power of 2. The base real address must be aligned * exactly to match the queue size. Each queue entry is 64 bytes * long, so for example a 32 entry queue must be aligned on a 2048 * byte real address boundary. * * The specified queue is unconfigured if the number of entries is given * as zero. * * For the current version of this API service, the argument queue is defined * as follows: * * queue description * ----- ------------------------- * 0x3c cpu mondo queue * 0x3d device mondo queue * 0x3e resumable error queue * 0x3f non-resumable error queue * * Note: The maximum number of entries for each queue for a specific cpu may * be determined from the machine description. */ #define HV_FAST_CPU_QCONF 0x14 #define HV_CPU_QUEUE_CPU_MONDO 0x3c #define HV_CPU_QUEUE_DEVICE_MONDO 0x3d #define HV_CPU_QUEUE_RES_ERROR 0x3e #define HV_CPU_QUEUE_NONRES_ERROR 0x3f #ifndef __ASSEMBLY__ extern unsigned long sun4v_cpu_qconf(unsigned long type, unsigned long queue_paddr, unsigned long num_queue_entries); #endif /* cpu_qinfo() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_QINFO * ARG0: queue * RET0: status * RET1: base real address * RET1: number of entries * ERRORS: EINVAL Invalid queue * * Return the configuration info for the given queue. The base real * address and number of entries of the defined queue are returned. * The queue argument values are the same as for cpu_qconf() above. * * If the specified queue is a valid queue number, but no queue has * been defined, the number of entries will be set to zero and the * base real address returned is undefined. */ #define HV_FAST_CPU_QINFO 0x15 /* cpu_mondo_send() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_MONDO_SEND * ARG0-1: CPU list * ARG2: data real address * RET0: status * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list * is not 2-byte aligned. * ENORADDR Invalid data mondo address, or invalid cpu list * address. * ENOCPU Invalid cpu in CPU list * EWOULDBLOCK Some or all of the listed CPUs did not receive * the mondo * ECPUERROR One or more of the listed CPUs are in error * state, use HV_FAST_CPU_STATE to see which ones * EINVAL CPU list includes caller's CPU ID * * Send a mondo interrupt to the CPUs in the given CPU list with the * 64-bytes at the given data real address. The data must be 64-byte * aligned. The mondo data will be delivered to the cpu_mondo queues * of the recipient CPUs. * * In all cases, error or not, the CPUs in the CPU list to which the * mondo has been successfully delivered will be indicated by having * their entry in CPU list updated with the value 0xffff. */ #define HV_FAST_CPU_MONDO_SEND 0x42 #ifndef __ASSEMBLY__ extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); #endif /* cpu_myid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_MYID * RET0: status * RET1: CPU ID * ERRORS: No errors defined. * * Return the hypervisor ID handle for the current CPU. Use by a * virtual CPU to discover it's own identity. */ #define HV_FAST_CPU_MYID 0x16 /* cpu_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_STATE * ARG0: CPU ID * RET0: status * RET1: state * ERRORS: ENOCPU Invalid CPU ID * * Retrieve the current state of the CPU with the given CPU ID. */ #define HV_FAST_CPU_STATE 0x17 #define HV_CPU_STATE_STOPPED 0x01 #define HV_CPU_STATE_RUNNING 0x02 #define HV_CPU_STATE_ERROR 0x03 #ifndef __ASSEMBLY__ extern long sun4v_cpu_state(unsigned long cpuid); #endif /* cpu_set_rtba() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_SET_RTBA * ARG0: RTBA * RET0: status * RET1: previous RTBA * ERRORS: ENORADDR Invalid RTBA real address * EBADALIGN RTBA is incorrectly aligned for a trap table * * Set the real trap base address of the local cpu to the given RTBA. * The supplied RTBA must be aligned on a 256 byte boundary. Upon * success the previous value of the RTBA is returned in RET1. * * Note: This service does not affect %tba */ #define HV_FAST_CPU_SET_RTBA 0x18 /* cpu_set_rtba() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_GET_RTBA * RET0: status * RET1: previous RTBA * ERRORS: No possible error. * * Returns the current value of RTBA in RET1. */ #define HV_FAST_CPU_GET_RTBA 0x19 /* MMU services. * * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. */ #ifndef __ASSEMBLY__ struct hv_tsb_descr { unsigned short pgsz_idx; unsigned short assoc; unsigned int num_ttes; /* in TTEs */ unsigned int ctx_idx; unsigned int pgsz_mask; unsigned long tsb_base; unsigned long resv; }; #endif #define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 #define HV_TSB_DESCR_ASSOC_OFFSET 0x02 #define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 #define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 #define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c #define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 #define HV_TSB_DESCR_RESV_OFFSET 0x18 /* Page size bitmask. */ #define HV_PGSZ_MASK_8K (1 << 0) #define HV_PGSZ_MASK_64K (1 << 1) #define HV_PGSZ_MASK_512K (1 << 2) #define HV_PGSZ_MASK_4MB (1 << 3) #define HV_PGSZ_MASK_32MB (1 << 4) #define HV_PGSZ_MASK_256MB (1 << 5) #define HV_PGSZ_MASK_2GB (1 << 6) #define HV_PGSZ_MASK_16GB (1 << 7) /* Page size index. The value given in the TSB descriptor must correspond * to the smallest page size specified in the pgsz_mask page size bitmask. */ #define HV_PGSZ_IDX_8K 0 #define HV_PGSZ_IDX_64K 1 #define HV_PGSZ_IDX_512K 2 #define HV_PGSZ_IDX_4MB 3 #define HV_PGSZ_IDX_32MB 4 #define HV_PGSZ_IDX_256MB 5 #define HV_PGSZ_IDX_2GB 6 #define HV_PGSZ_IDX_16GB 7 /* MMU fault status area. * * MMU related faults have their status and fault address information * placed into a memory region made available by privileged code. Each * virtual processor must make a mmu_fault_area_conf() call to tell the * hypervisor where that processor's fault status should be stored. * * The fault status block is a multiple of 64-bytes and must be aligned * on a 64-byte boundary. */ #ifndef __ASSEMBLY__ struct hv_fault_status { unsigned long i_fault_type; unsigned long i_fault_addr; unsigned long i_fault_ctx; unsigned long i_reserved[5]; unsigned long d_fault_type; unsigned long d_fault_addr; unsigned long d_fault_ctx; unsigned long d_reserved[5]; }; #endif #define HV_FAULT_I_TYPE_OFFSET 0x00 #define HV_FAULT_I_ADDR_OFFSET 0x08 #define HV_FAULT_I_CTX_OFFSET 0x10 #define HV_FAULT_D_TYPE_OFFSET 0x40 #define HV_FAULT_D_ADDR_OFFSET 0x48 #define HV_FAULT_D_CTX_OFFSET 0x50 #define HV_FAULT_TYPE_FAST_MISS 1 #define HV_FAULT_TYPE_FAST_PROT 2 #define HV_FAULT_TYPE_MMU_MISS 3 #define HV_FAULT_TYPE_INV_RA 4 #define HV_FAULT_TYPE_PRIV_VIOL 5 #define HV_FAULT_TYPE_PROT_VIOL 6 #define HV_FAULT_TYPE_NFO 7 #define HV_FAULT_TYPE_NFO_SEFF 8 #define HV_FAULT_TYPE_INV_VA 9 #define HV_FAULT_TYPE_INV_ASI 10 #define HV_FAULT_TYPE_NC_ATOMIC 11 #define HV_FAULT_TYPE_PRIV_ACT 12 #define HV_FAULT_TYPE_RESV1 13 #define HV_FAULT_TYPE_UNALIGNED 14 #define HV_FAULT_TYPE_INV_PGSZ 15 /* Values 16 --> -2 are reserved. */ #define HV_FAULT_TYPE_MULTIPLE -1 /* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), * and mmu_{map,unmap}_perm_addr(). */ #define HV_MMU_DMMU 0x01 #define HV_MMU_IMMU 0x02 #define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) /* mmu_map_addr() * TRAP: HV_MMU_MAP_ADDR_TRAP * ARG0: virtual address * ARG1: mmu context * ARG2: TTE * ARG3: flags (HV_MMU_{IMMU,DMMU}) * ERRORS: EINVAL Invalid virtual address, mmu context, or flags * EBADPGSZ Invalid page size value * ENORADDR Invalid real address in TTE * * Create a non-permanent mapping using the given TTE, virtual * address, and mmu context. The flags argument determines which * (data, or instruction, or both) TLB the mapping gets loaded into. * * The behavior is undefined if the valid bit is clear in the TTE. * * Note: This API call is for privileged code to specify temporary translation * mappings without the need to create and manage a TSB. */ /* mmu_unmap_addr() * TRAP: HV_MMU_UNMAP_ADDR_TRAP * ARG0: virtual address * ARG1: mmu context * ARG2: flags (HV_MMU_{IMMU,DMMU}) * ERRORS: EINVAL Invalid virtual address, mmu context, or flags * * Demaps the given virtual address in the given mmu context on this * CPU. This function is intended to be used to demap pages mapped * with mmu_map_addr. This service is equivalent to invoking * mmu_demap_page() with only the current CPU in the CPU list. The * flags argument determines which (data, or instruction, or both) TLB * the mapping gets unmapped from. * * Attempting to perform an unmap operation for a previously defined * permanent mapping will have undefined results. */ /* mmu_tsb_ctx0() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_TSB_CTX0 * ARG0: number of TSB descriptions * ARG1: TSB descriptions pointer * RET0: status * ERRORS: ENORADDR Invalid TSB descriptions pointer or * TSB base within a descriptor * EBADALIGN TSB descriptions pointer is not aligned * to an 8-byte boundary, or TSB base * within a descriptor is not aligned for * the given TSB size * EBADPGSZ Invalid page size in a TSB descriptor * EBADTSB Invalid associativity or size in a TSB * descriptor * EINVAL Invalid number of TSB descriptions, or * invalid context index in a TSB * descriptor, or index page size not * equal to smallest page size in page * size bitmask field. * * Configures the TSBs for the current CPU for virtual addresses with * context zero. The TSB descriptions pointer is a pointer to an * array of the given number of TSB descriptions. * * Note: The maximum number of TSBs available to a virtual CPU is given by the * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the * machine description. */ #define HV_FAST_MMU_TSB_CTX0 0x20 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, unsigned long tsb_desc_ra); #endif /* mmu_tsb_ctxnon0() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 * ARG0: number of TSB descriptions * ARG1: TSB descriptions pointer * RET0: status * ERRORS: Same as for mmu_tsb_ctx0() above. * * Configures the TSBs for the current CPU for virtual addresses with * non-zero contexts. The TSB descriptions pointer is a pointer to an * array of the given number of TSB descriptions. * * Note: A maximum of 16 TSBs may be specified in the TSB description list. */ #define HV_FAST_MMU_TSB_CTXNON0 0x21 /* mmu_demap_page() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_DEMAP_PAGE * ARG0: reserved, must be zero * ARG1: reserved, must be zero * ARG2: virtual address * ARG3: mmu context * ARG4: flags (HV_MMU_{IMMU,DMMU}) * RET0: status * ERRORS: EINVAL Invalid virutal address, context, or * flags value * ENOTSUPPORTED ARG0 or ARG1 is non-zero * * Demaps any page mapping of the given virtual address in the given * mmu context for the current virtual CPU. Any virtually tagged * caches are guaranteed to be kept consistent. The flags argument * determines which TLB (instruction, or data, or both) participate in * the operation. * * ARG0 and ARG1 are both reserved and must be set to zero. */ #define HV_FAST_MMU_DEMAP_PAGE 0x22 /* mmu_demap_ctx() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_DEMAP_CTX * ARG0: reserved, must be zero * ARG1: reserved, must be zero * ARG2: mmu context * ARG3: flags (HV_MMU_{IMMU,DMMU}) * RET0: status * ERRORS: EINVAL Invalid context or flags value * ENOTSUPPORTED ARG0 or ARG1 is non-zero * * Demaps all non-permanent virtual page mappings previously specified * for the given context for the current virtual CPU. Any virtual * tagged caches are guaranteed to be kept consistent. The flags * argument determines which TLB (instruction, or data, or both) * participate in the operation. * * ARG0 and ARG1 are both reserved and must be set to zero. */ #define HV_FAST_MMU_DEMAP_CTX 0x23 /* mmu_demap_all() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_DEMAP_ALL * ARG0: reserved, must be zero * ARG1: reserved, must be zero * ARG2: flags (HV_MMU_{IMMU,DMMU}) * RET0: status * ERRORS: EINVAL Invalid flags value * ENOTSUPPORTED ARG0 or ARG1 is non-zero * * Demaps all non-permanent virtual page mappings previously specified * for the current virtual CPU. Any virtual tagged caches are * guaranteed to be kept consistent. The flags argument determines * which TLB (instruction, or data, or both) participate in the * operation. * * ARG0 and ARG1 are both reserved and must be set to zero. */ #define HV_FAST_MMU_DEMAP_ALL 0x24 #ifndef __ASSEMBLY__ extern void sun4v_mmu_demap_all(void); #endif /* mmu_map_perm_addr() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR * ARG0: virtual address * ARG1: reserved, must be zero * ARG2: TTE * ARG3: flags (HV_MMU_{IMMU,DMMU}) * RET0: status * ERRORS: EINVAL Invalid virutal address or flags value * EBADPGSZ Invalid page size value * ENORADDR Invalid real address in TTE * ETOOMANY Too many mappings (max of 8 reached) * * Create a permanent mapping using the given TTE and virtual address * for context 0 on the calling virtual CPU. A maximum of 8 such * permanent mappings may be specified by privileged code. Mappings * may be removed with mmu_unmap_perm_addr(). * * The behavior is undefined if a TTE with the valid bit clear is given. * * Note: This call is used to specify address space mappings for which * privileged code does not expect to receive misses. For example, * this mechanism can be used to map kernel nucleus code and data. */ #define HV_FAST_MMU_MAP_PERM_ADDR 0x25 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, unsigned long set_to_zero, unsigned long tte, unsigned long flags); #endif /* mmu_fault_area_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF * ARG0: real address * RET0: status * RET1: previous mmu fault area real address * ERRORS: ENORADDR Invalid real address * EBADALIGN Invalid alignment for fault area * * Configure the MMU fault status area for the calling CPU. A 64-byte * aligned real address specifies where MMU fault status information * is placed. The return value is the previously specified area, or 0 * for the first invocation. Specifying a fault area at real address * 0 is not allowed. */ #define HV_FAST_MMU_FAULT_AREA_CONF 0x26 /* mmu_enable() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_ENABLE * ARG0: enable flag * ARG1: return target address * RET0: status * ERRORS: ENORADDR Invalid real address when disabling * translation. * EBADALIGN The return target address is not * aligned to an instruction. * EINVAL The enable flag request the current * operating mode (e.g. disable if already * disabled) * * Enable or disable virtual address translation for the calling CPU * within the virtual machine domain. If the enable flag is zero, * translation is disabled, any non-zero value will enable * translation. * * When this function returns, the newly selected translation mode * will be active. If the mmu is being enabled, then the return * target address is a virtual address else it is a real address. * * Upon successful completion, control will be returned to the given * return target address (ie. the cpu will jump to that address). On * failure, the previous mmu mode remains and the trap simply returns * as normal with the appropriate error code in RET0. */ #define HV_FAST_MMU_ENABLE 0x27 /* mmu_unmap_perm_addr() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR * ARG0: virtual address * ARG1: reserved, must be zero * ARG2: flags (HV_MMU_{IMMU,DMMU}) * RET0: status * ERRORS: EINVAL Invalid virutal address or flags value * ENOMAP Specified mapping was not found * * Demaps any permanent page mapping (established via * mmu_map_perm_addr()) at the given virtual address for context 0 on * the current virtual CPU. Any virtual tagged caches are guaranteed * to be kept consistent. */ #define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 /* mmu_tsb_ctx0_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO * ARG0: max TSBs * ARG1: buffer pointer * RET0: status * RET1: number of TSBs * ERRORS: EINVAL Supplied buffer is too small * EBADALIGN The buffer pointer is badly aligned * ENORADDR Invalid real address for buffer pointer * * Return the TSB configuration as previous defined by mmu_tsb_ctx0() * into the provided buffer. The size of the buffer is given in ARG1 * in terms of the number of TSB description entries. * * Upon return, RET1 always contains the number of TSB descriptions * previously configured. If zero TSBs were configured, EOK is * returned with RET1 containing 0. */ #define HV_FAST_MMU_TSB_CTX0_INFO 0x29 /* mmu_tsb_ctxnon0_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO * ARG0: max TSBs * ARG1: buffer pointer * RET0: status * RET1: number of TSBs * ERRORS: EINVAL Supplied buffer is too small * EBADALIGN The buffer pointer is badly aligned * ENORADDR Invalid real address for buffer pointer * * Return the TSB configuration as previous defined by * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer * is given in ARG1 in terms of the number of TSB description entries. * * Upon return, RET1 always contains the number of TSB descriptions * previously configured. If zero TSBs were configured, EOK is * returned with RET1 containing 0. */ #define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a /* mmu_fault_area_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO * RET0: status * RET1: fault area real address * ERRORS: No errors defined. * * Return the currently defined MMU fault status area for the current * CPU. The real address of the fault status area is returned in * RET1, or 0 is returned in RET1 if no fault status area is defined. * * Note: mmu_fault_area_conf() may be called with the return value (RET1) * from this service if there is a need to save and restore the fault * area for a cpu. */ #define HV_FAST_MMU_FAULT_AREA_INFO 0x2b /* Cache and Memory services. */ /* mem_scrub() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MEM_SCRUB * ARG0: real address * ARG1: length * RET0: status * RET1: length scrubbed * ERRORS: ENORADDR Invalid real address * EBADALIGN Start address or length are not correctly * aligned * EINVAL Length is zero * * Zero the memory contents in the range real address to real address * plus length minus 1. Also, valid ECC will be generated for that * memory address range. Scrubbing is started at the given real * address, but may not scrub the entire given length. The actual * length scrubbed will be returned in RET1. * * The real address and length must be aligned on an 8K boundary, or * contain the start address and length from a sun4v error report. * * Note: There are two uses for this function. The first use is to block clear * and initialize memory and the second is to scrub an u ncorrectable * error reported via a resumable or non-resumable trap. The second * use requires the arguments to be equal to the real address and length * provided in a sun4v memory error report. */ #define HV_FAST_MEM_SCRUB 0x31 /* mem_sync() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MEM_SYNC * ARG0: real address * ARG1: length * RET0: status * RET1: length synced * ERRORS: ENORADDR Invalid real address * EBADALIGN Start address or length are not correctly * aligned * EINVAL Length is zero * * Force the next access within the real address to real address plus * length minus 1 to be fetches from main system memory. Less than * the given length may be synced, the actual amount synced is * returned in RET1. The real address and length must be aligned on * an 8K boundary. */ #define HV_FAST_MEM_SYNC 0x32 /* Time of day services. * * The hypervisor maintains the time of day on a per-domain basis. * Changing the time of day in one domain does not affect the time of * day on any other domain. * * Time is described by a single unsigned 64-bit word which is the * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, * 1970). */ /* tod_get() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TOD_GET * RET0: status * RET1: TOD * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable * ENOTSUPPORTED If TOD not supported on this platform * * Return the current time of day. May block if TOD access is * temporarily not possible. */ #define HV_FAST_TOD_GET 0x50 #ifndef __ASSEMBLY__ extern unsigned long sun4v_tod_get(unsigned long *time); #endif /* tod_set() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TOD_SET * ARG0: TOD * RET0: status * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable * ENOTSUPPORTED If TOD not supported on this platform * * The current time of day is set to the value specified in ARG0. May * block if TOD access is temporarily not possible. */ #define HV_FAST_TOD_SET 0x51 #ifndef __ASSEMBLY__ extern unsigned long sun4v_tod_set(unsigned long time); #endif /* Console services */ /* con_getchar() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CONS_GETCHAR * RET0: status * RET1: character * ERRORS: EWOULDBLOCK No character available. * * Returns a character from the console device. If no character is * available then an EWOULDBLOCK error is returned. If a character is * available, then the returned status is EOK and the character value * is in RET1. * * A virtual BREAK is represented by the 64-bit value -1. * * A virtual HUP signal is represented by the 64-bit value -2. */ #define HV_FAST_CONS_GETCHAR 0x60 /* con_putchar() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CONS_PUTCHAR * ARG0: character * RET0: status * ERRORS: EINVAL Illegal character * EWOULDBLOCK Output buffer currently full, would block * * Send a character to the console device. Only character values * between 0 and 255 may be used. Values outside this range are * invalid except for the 64-bit value -1 which is used to send a * virtual BREAK. */ #define HV_FAST_CONS_PUTCHAR 0x61 /* con_read() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CONS_READ * ARG0: buffer real address * ARG1: buffer size in bytes * RET0: status * RET1: bytes read or BREAK or HUP * ERRORS: EWOULDBLOCK No character available. * * Reads characters into a buffer from the console device. If no * character is available then an EWOULDBLOCK error is returned. * If a character is available, then the returned status is EOK * and the number of bytes read into the given buffer is provided * in RET1. * * A virtual BREAK is represented by the 64-bit RET1 value -1. * * A virtual HUP signal is represented by the 64-bit RET1 value -2. * * If BREAK or HUP are indicated, no bytes were read into buffer. */ #define HV_FAST_CONS_READ 0x62 /* con_write() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CONS_WRITE * ARG0: buffer real address * ARG1: buffer size in bytes * RET0: status * RET1: bytes written * ERRORS: EWOULDBLOCK Output buffer currently full, would block * * Send a characters in buffer to the console device. Breaks must be * sent using con_putchar(). */ #define HV_FAST_CONS_WRITE 0x63 #ifndef __ASSEMBLY__ extern long sun4v_con_getchar(long *status); extern long sun4v_con_putchar(long c); extern long sun4v_con_read(unsigned long buffer, unsigned long size, unsigned long *bytes_read); extern unsigned long sun4v_con_write(unsigned long buffer, unsigned long size, unsigned long *bytes_written); #endif /* mach_set_soft_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE * ARG0: software state * ARG1: software state description pointer * RET0: status * ERRORS: EINVAL software state not valid or software state * description is not NULL terminated * ENORADDR software state description pointer is not a * valid real address * EBADALIGNED software state description is not correctly * aligned * * This allows the guest to report it's soft state to the hypervisor. There * are two primary components to this state. The first part states whether * the guest software is running or not. The second containts optional * details specific to the software. * * The software state argument is defined below in HV_SOFT_STATE_*, and * indicates whether the guest is operating normally or in a transitional * state. * * The software state description argument is a real address of a data buffer * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL * terminated 7-bit ASCII string of up to 31 characters not including the * NULL termination. */ #define HV_FAST_MACH_SET_SOFT_STATE 0x70 #define HV_SOFT_STATE_NORMAL 0x01 #define HV_SOFT_STATE_TRANSITION 0x02 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, unsigned long msg_string_ra); #endif /* mach_get_soft_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE * ARG0: software state description pointer * RET0: status * RET1: software state * ERRORS: ENORADDR software state description pointer is not a * valid real address * EBADALIGNED software state description is not correctly * aligned * * Retrieve the current value of the guest's software state. The rules * for the software state pointer are the same as for mach_set_soft_state() * above. */ #define HV_FAST_MACH_GET_SOFT_STATE 0x71 /* svc_send() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SVC_SEND * ARG0: service ID * ARG1: buffer real address * ARG2: buffer size * RET0: STATUS * RET1: sent_bytes * * Be careful, all output registers are clobbered by this operation, * so for example it is not possible to save away a value in %o4 * across the trap. */ #define HV_FAST_SVC_SEND 0x80 /* svc_recv() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SVC_RECV * ARG0: service ID * ARG1: buffer real address * ARG2: buffer size * RET0: STATUS * RET1: recv_bytes * * Be careful, all output registers are clobbered by this operation, * so for example it is not possible to save away a value in %o4 * across the trap. */ #define HV_FAST_SVC_RECV 0x81 /* svc_getstatus() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SVC_GETSTATUS * ARG0: service ID * RET0: STATUS * RET1: status bits */ #define HV_FAST_SVC_GETSTATUS 0x82 /* svc_setstatus() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SVC_SETSTATUS * ARG0: service ID * ARG1: bits to set * RET0: STATUS */ #define HV_FAST_SVC_SETSTATUS 0x83 /* svc_clrstatus() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SVC_CLRSTATUS * ARG0: service ID * ARG1: bits to clear * RET0: STATUS */ #define HV_FAST_SVC_CLRSTATUS 0x84 #ifndef __ASSEMBLY__ extern unsigned long sun4v_svc_send(unsigned long svc_id, unsigned long buffer, unsigned long buffer_size, unsigned long *sent_bytes); extern unsigned long sun4v_svc_recv(unsigned long svc_id, unsigned long buffer, unsigned long buffer_size, unsigned long *recv_bytes); extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, unsigned long *status_bits); extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, unsigned long status_bits); extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, unsigned long status_bits); #endif /* Trap trace services. * * The hypervisor provides a trap tracing capability for privileged * code running on each virtual CPU. Privileged code provides a * round-robin trap trace queue within which the hypervisor writes * 64-byte entries detailing hyperprivileged traps taken n behalf of * privileged code. This is provided as a debugging capability for * privileged code. * * The trap trace control structure is 64-bytes long and placed at the * start (offset 0) of the trap trace buffer, and is described as * follows: */ #ifndef __ASSEMBLY__ struct hv_trap_trace_control { unsigned long head_offset; unsigned long tail_offset; unsigned long __reserved[0x30 / sizeof(unsigned long)]; }; #endif #define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 #define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 /* The head offset is the offset of the most recently completed entry * in the trap-trace buffer. The tail offset is the offset of the * next entry to be written. The control structure is owned and * modified by the hypervisor. A guest may not modify the control * structure contents. Attempts to do so will result in undefined * behavior for the guest. * * Each trap trace buffer entry is layed out as follows: */ #ifndef __ASSEMBLY__ struct hv_trap_trace_entry { unsigned char type; /* Hypervisor or guest entry? */ unsigned char hpstate; /* Hyper-privileged state */ unsigned char tl; /* Trap level */ unsigned char gl; /* Global register level */ unsigned short tt; /* Trap type */ unsigned short tag; /* Extended trap identifier */ unsigned long tstate; /* Trap state */ unsigned long tick; /* Tick */ unsigned long tpc; /* Trap PC */ unsigned long f1; /* Entry specific */ unsigned long f2; /* Entry specific */ unsigned long f3; /* Entry specific */ unsigned long f4; /* Entry specific */ }; #endif #define HV_TRAP_TRACE_ENTRY_TYPE 0x00 #define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 #define HV_TRAP_TRACE_ENTRY_TL 0x02 #define HV_TRAP_TRACE_ENTRY_GL 0x03 #define HV_TRAP_TRACE_ENTRY_TT 0x04 #define HV_TRAP_TRACE_ENTRY_TAG 0x06 #define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 #define HV_TRAP_TRACE_ENTRY_TICK 0x10 #define HV_TRAP_TRACE_ENTRY_TPC 0x18 #define HV_TRAP_TRACE_ENTRY_F1 0x20 #define HV_TRAP_TRACE_ENTRY_F2 0x28 #define HV_TRAP_TRACE_ENTRY_F3 0x30 #define HV_TRAP_TRACE_ENTRY_F4 0x38 /* The type field is encoded as follows. */ #define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ #define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ #define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ /* ttrace_buf_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TTRACE_BUF_CONF * ARG0: real address * ARG1: number of entries * RET0: status * RET1: number of entries * ERRORS: ENORADDR Invalid real address * EINVAL Size is too small * EBADALIGN Real address not aligned on 64-byte boundary * * Requests hypervisor trap tracing and declares a virtual CPU's trap * trace buffer to the hypervisor. The real address supplies the real * base address of the trap trace queue and must be 64-byte aligned. * Specifying a value of 0 for the number of entries disables trap * tracing for the calling virtual CPU. The buffer allocated must be * sized for a power of two number of 64-byte trap trace entries plus * an initial 64-byte control structure. * * This may be invoked any number of times so that a virtual CPU may * relocate a trap trace buffer or create "snapshots" of information. * * If the real address is illegal or badly aligned, then trap tracing * is disabled and an error is returned. * * Upon failure with EINVAL, this service call returns in RET1 the * minimum number of buffer entries required. Upon other failures * RET1 is undefined. */ #define HV_FAST_TTRACE_BUF_CONF 0x90 /* ttrace_buf_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TTRACE_BUF_INFO * RET0: status * RET1: real address * RET2: size * ERRORS: None defined. * * Returns the size and location of the previously declared trap-trace * buffer. In the event that no buffer was previously defined, or the * buffer is disabled, this call will return a size of zero bytes. */ #define HV_FAST_TTRACE_BUF_INFO 0x91 /* ttrace_enable() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TTRACE_ENABLE * ARG0: enable * RET0: status * RET1: previous enable state * ERRORS: EINVAL No trap trace buffer currently defined * * Enable or disable trap tracing, and return the previous enabled * state in RET1. Future systems may define various flags for the * enable argument (ARG0), for the moment a guest should pass * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all * tracing - which will ensure future compatability. */ #define HV_FAST_TTRACE_ENABLE 0x92 /* ttrace_freeze() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TTRACE_FREEZE * ARG0: freeze * RET0: status * RET1: previous freeze state * ERRORS: EINVAL No trap trace buffer currently defined * * Freeze or unfreeze trap tracing, returning the previous freeze * state in RET1. A guest should pass a non-zero value to freeze and * a zero value to unfreeze all tracing. The returned previous state * is 0 for not frozen and 1 for frozen. */ #define HV_FAST_TTRACE_FREEZE 0x93 /* ttrace_addentry() * TRAP: HV_TTRACE_ADDENTRY_TRAP * ARG0: tag (16-bits) * ARG1: data word 0 * ARG2: data word 1 * ARG3: data word 2 * ARG4: data word 3 * RET0: status * ERRORS: EINVAL No trap trace buffer currently defined * * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 * is modified - none of the other registers holding arguments are * volatile across this hypervisor service. */ /* Core dump services. * * Since the hypervisor viraulizes and thus obscures a lot of the * physical machine layout and state, traditional OS crash dumps can * be difficult to diagnose especially when the problem is a * configuration error of some sort. * * The dump services provide an opaque buffer into which the * hypervisor can place it's internal state in order to assist in * debugging such situations. The contents are opaque and extremely * platform and hypervisor implementation specific. The guest, during * a core dump, requests that the hypervisor update any information in * the dump buffer in preparation to being dumped as part of the * domain's memory image. */ /* dump_buf_update() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_DUMP_BUF_UPDATE * ARG0: real address * ARG1: size * RET0: status * RET1: required size of dump buffer * ERRORS: ENORADDR Invalid real address * EBADALIGN Real address is not aligned on a 64-byte * boundary * EINVAL Size is non-zero but less than minimum size * required * ENOTSUPPORTED Operation not supported on current logical * domain * * Declare a domain dump buffer to the hypervisor. The real address * provided for the domain dump buffer must be 64-byte aligned. The * size specifies the size of the dump buffer and may be larger than * the minimum size specified in the machine description. The * hypervisor will fill the dump buffer with opaque data. * * Note: A guest may elect to include dump buffer contents as part of a crash * dump to assist with debugging. This function may be called any number * of times so that a guest may relocate a dump buffer, or create * "snapshots" of any dump-buffer information. Each call to * dump_buf_update() atomically declares the new dump buffer to the * hypervisor. * * A specified size of 0 unconfigures the dump buffer. If the real * address is illegal or badly aligned, then any currently active dump * buffer is disabled and an error is returned. * * In the event that the call fails with EINVAL, RET1 contains the * minimum size requires by the hypervisor for a valid dump buffer. */ #define HV_FAST_DUMP_BUF_UPDATE 0x94 /* dump_buf_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_DUMP_BUF_INFO * RET0: status * RET1: real address of current dump buffer * RET2: size of current dump buffer * ERRORS: No errors defined. * * Return the currently configures dump buffer description. A * returned size of 0 bytes indicates an undefined dump buffer. In * this case the return address in RET1 is undefined. */ #define HV_FAST_DUMP_BUF_INFO 0x95 /* Device interrupt services. * * Device interrupts are allocated to system bus bridges by the hypervisor, * and described to OBP in the machine description. OBP then describes * these interrupts to the OS via properties in the device tree. * * Terminology: * * cpuid Unique opaque value which represents a target cpu. * * devhandle Device handle. It uniquely identifies a device, and * consistes of the lower 28-bits of the hi-cell of the * first entry of the device's "reg" property in the * OBP device tree. * * devino Device interrupt number. Specifies the relative * interrupt number within the device. The unique * combination of devhandle and devino are used to * identify a specific device interrupt. * * Note: The devino value is the same as the values in the * "interrupts" property or "interrupt-map" property * in the OBP device tree for that device. * * sysino System interrupt number. A 64-bit unsigned interger * representing a unique interrupt within a virtual * machine. * * intr_state A flag representing the interrupt state for a given * sysino. The state values are defined below. * * intr_enabled A flag representing the 'enabled' state for a given * sysino. The enable values are defined below. */ #define HV_INTR_STATE_IDLE 0 /* Nothing pending */ #define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ #define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ #define HV_INTR_DISABLED 0 /* sysino not enabled */ #define HV_INTR_ENABLED 1 /* sysino enabled */ /* intr_devino_to_sysino() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO * ARG0: devhandle * ARG1: devino * RET0: status * RET1: sysino * ERRORS: EINVAL Invalid devhandle/devino * * Converts a device specific interrupt number of the given * devhandle/devino into a system specific ino (sysino). */ #define HV_FAST_INTR_DEVINO2SYSINO 0xa0 #ifndef __ASSEMBLY__ extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, unsigned long devino); #endif /* intr_getenabled() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_GETENABLED * ARG0: sysino * RET0: status * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) * ERRORS: EINVAL Invalid sysino * * Returns interrupt enabled state in RET1 for the interrupt defined * by the given sysino. */ #define HV_FAST_INTR_GETENABLED 0xa1 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_getenabled(unsigned long sysino); #endif /* intr_setenabled() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_SETENABLED * ARG0: sysino * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) * RET0: status * ERRORS: EINVAL Invalid sysino or intr_enabled value * * Set the 'enabled' state of the interrupt sysino. */ #define HV_FAST_INTR_SETENABLED 0xa2 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); #endif /* intr_getstate() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_GETSTATE * ARG0: sysino * RET0: status * RET1: intr_state (HV_INTR_STATE_*) * ERRORS: EINVAL Invalid sysino * * Returns current state of the interrupt defined by the given sysino. */ #define HV_FAST_INTR_GETSTATE 0xa3 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_getstate(unsigned long sysino); #endif /* intr_setstate() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_SETSTATE * ARG0: sysino * ARG1: intr_state (HV_INTR_STATE_*) * RET0: status * ERRORS: EINVAL Invalid sysino or intr_state value * * Sets the current state of the interrupt described by the given sysino * value. * * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending * interrupt for sysino. */ #define HV_FAST_INTR_SETSTATE 0xa4 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); #endif /* intr_gettarget() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_GETTARGET * ARG0: sysino * RET0: status * RET1: cpuid * ERRORS: EINVAL Invalid sysino * * Returns CPU that is the current target of the interrupt defined by * the given sysino. The CPU value returned is undefined if the target * has not been set via intr_settarget(). */ #define HV_FAST_INTR_GETTARGET 0xa5 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_gettarget(unsigned long sysino); #endif /* intr_settarget() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_INTR_SETTARGET * ARG0: sysino * ARG1: cpuid * RET0: status * ERRORS: EINVAL Invalid sysino * ENOCPU Invalid cpuid * * Set the target CPU for the interrupt defined by the given sysino. */ #define HV_FAST_INTR_SETTARGET 0xa6 #ifndef __ASSEMBLY__ extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); #endif /* vintr_get_cookie() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_GET_COOKIE * ARG0: device handle * ARG1: device ino * RET0: status * RET1: cookie */ #define HV_FAST_VINTR_GET_COOKIE 0xa7 /* vintr_set_cookie() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_SET_COOKIE * ARG0: device handle * ARG1: device ino * ARG2: cookie * RET0: status */ #define HV_FAST_VINTR_SET_COOKIE 0xa8 /* vintr_get_valid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_GET_VALID * ARG0: device handle * ARG1: device ino * RET0: status * RET1: valid state */ #define HV_FAST_VINTR_GET_VALID 0xa9 /* vintr_set_valid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_SET_VALID * ARG0: device handle * ARG1: device ino * ARG2: valid state * RET0: status */ #define HV_FAST_VINTR_SET_VALID 0xaa /* vintr_get_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_GET_STATE * ARG0: device handle * ARG1: device ino * RET0: status * RET1: state */ #define HV_FAST_VINTR_GET_STATE 0xab /* vintr_set_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_SET_STATE * ARG0: device handle * ARG1: device ino * ARG2: state * RET0: status */ #define HV_FAST_VINTR_SET_STATE 0xac /* vintr_get_target() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_GET_TARGET * ARG0: device handle * ARG1: device ino * RET0: status * RET1: cpuid */ #define HV_FAST_VINTR_GET_TARGET 0xad /* vintr_set_target() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_VINTR_SET_TARGET * ARG0: device handle * ARG1: device ino * ARG2: cpuid * RET0: status */ #define HV_FAST_VINTR_SET_TARGET 0xae #ifndef __ASSEMBLY__ extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, unsigned long dev_ino, unsigned long *cookie); extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, unsigned long dev_ino, unsigned long cookie); extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, unsigned long dev_ino, unsigned long *valid); extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, unsigned long dev_ino, unsigned long valid); extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, unsigned long dev_ino, unsigned long *state); extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, unsigned long dev_ino, unsigned long state); extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, unsigned long dev_ino, unsigned long *cpuid); extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, unsigned long dev_ino, unsigned long cpuid); #endif /* PCI IO services. * * See the terminology descriptions in the device interrupt services * section above as those apply here too. Here are terminology * definitions specific to these PCI IO services: * * tsbnum TSB number. Indentifies which io-tsb is used. * For this version of the specification, tsbnum * must be zero. * * tsbindex TSB index. Identifies which entry in the TSB * is used. The first entry is zero. * * tsbid A 64-bit aligned data structure which contains * a tsbnum and a tsbindex. Bits 63:32 contain the * tsbnum and bits 31:00 contain the tsbindex. * * Use the HV_PCI_TSBID() macro to construct such * values. * * io_attributes IO attributes for IOMMU mappings. One of more * of the attritbute bits are stores in a 64-bit * value. The values are defined below. * * r_addr 64-bit real address * * pci_device PCI device address. A PCI device address identifies * a specific device on a specific PCI bus segment. * A PCI device address ia a 32-bit unsigned integer * with the following format: * * 00000000.bbbbbbbb.dddddfff.00000000 * * Use the HV_PCI_DEVICE_BUILD() macro to construct * such values. * * pci_config_offset * PCI configureation space offset. For conventional * PCI a value between 0 and 255. For extended * configuration space, a value between 0 and 4095. * * Note: For PCI configuration space accesses, the offset * must be aligned to the access size. * * error_flag A return value which specifies if the action succeeded * or failed. 0 means no error, non-0 means some error * occurred while performing the service. * * io_sync_direction * Direction definition for pci_dma_sync(), defined * below in HV_PCI_SYNC_*. * * io_page_list A list of io_page_addresses, an io_page_address is * a real address. * * io_page_list_p A pointer to an io_page_list. * * "size based byte swap" - Some functions do size based byte swapping * which allows sw to access pointers and * counters in native form when the processor * operates in a different endianness than the * IO bus. Size-based byte swapping converts a * multi-byte field between big-endian and * little-endian format. */ #define HV_PCI_MAP_ATTR_READ 0x01 #define HV_PCI_MAP_ATTR_WRITE 0x02 #define HV_PCI_DEVICE_BUILD(b,d,f) \ ((((b) & 0xff) << 16) | \ (((d) & 0x1f) << 11) | \ (((f) & 0x07) << 8)) #define HV_PCI_TSBID(__tsb_num, __tsb_index) \ ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) #define HV_PCI_SYNC_FOR_DEVICE 0x01 #define HV_PCI_SYNC_FOR_CPU 0x02 /* pci_iommu_map() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_IOMMU_MAP * ARG0: devhandle * ARG1: tsbid * ARG2: #ttes * ARG3: io_attributes * ARG4: io_page_list_p * RET0: status * RET1: #ttes mapped * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes * EBADALIGN Improperly aligned real address * ENORADDR Invalid real address * * Create IOMMU mappings in the sun4v device defined by the given * devhandle. The mappings are created in the TSB defined by the * tsbnum component of the given tsbid. The first mapping is created * in the TSB i ndex defined by the tsbindex component of the given tsbid. * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, * the second at tsbnum, tsbindex + 1, etc. * * All mappings are created with the attributes defined by the io_attributes * argument. The page mapping addresses are described in the io_page_list * defined by the given io_page_list_p, which is a pointer to the io_page_list. * The first entry in the io_page_list is the address for the first iotte, the * 2nd for the 2nd iotte, and so on. * * Each io_page_address in the io_page_list must be appropriately aligned. * #ttes must be greater than zero. For this version of the spec, the tsbnum * component of the given tsbid must be zero. * * Returns the actual number of mappings creates, which may be less than * or equal to the argument #ttes. If the function returns a value which * is less than the #ttes, the caller may continus to call the function with * an updated tsbid, #ttes, io_page_list_p arguments until all pages are * mapped. * * Note: This function does not imply an iotte cache flush. The guest must * demap an entry before re-mapping it. */ #define HV_FAST_PCI_IOMMU_MAP 0xb0 /* pci_iommu_demap() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP * ARG0: devhandle * ARG1: tsbid * ARG2: #ttes * RET0: status * RET1: #ttes demapped * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex * * Demap and flush IOMMU mappings in the device defined by the given * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum * component of the given tsbid, starting at the TSB index defined by the * tsbindex component of the given tsbid. * * For this version of the spec, the tsbnum of the given tsbid must be zero. * #ttes must be greater than zero. * * Returns the actual number of ttes demapped, which may be less than or equal * to the argument #ttes. If #ttes demapped is less than #ttes, the caller * may continue to call this function with updated tsbid and #ttes arguments * until all pages are demapped. * * Note: Entries do not have to be mapped to be demapped. A demap of an * unmapped page will flush the entry from the tte cache. */ #define HV_FAST_PCI_IOMMU_DEMAP 0xb1 /* pci_iommu_getmap() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP * ARG0: devhandle * ARG1: tsbid * RET0: status * RET1: io_attributes * RET2: real address * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex * ENOMAP Mapping is not valid, no translation exists * * Read and return the mapping in the device described by the given devhandle * and tsbid. If successful, the io_attributes shall be returned in RET1 * and the page address of the mapping shall be returned in RET2. * * For this version of the spec, the tsbnum component of the given tsbid * must be zero. */ #define HV_FAST_PCI_IOMMU_GETMAP 0xb2 /* pci_iommu_getbypass() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS * ARG0: devhandle * ARG1: real address * ARG2: io_attributes * RET0: status * RET1: io_addr * ERRORS: EINVAL Invalid devhandle/io_attributes * ENORADDR Invalid real address * ENOTSUPPORTED Function not supported in this implementation. * * Create a "special" mapping in the device described by the given devhandle, * for the given real address and attributes. Return the IO address in RET1 * if successful. */ #define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 /* pci_config_get() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_CONFIG_GET * ARG0: devhandle * ARG1: pci_device * ARG2: pci_config_offset * ARG3: size * RET0: status * RET1: error_flag * RET2: data * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size * EBADALIGN pci_config_offset not size aligned * ENOACCESS Access to this offset is not permitted * * Read PCI configuration space for the adapter described by the given * devhandle. Read size (1, 2, or 4) bytes of data from the given * pci_device, at pci_config_offset from the beginning of the device's * configuration space. If there was no error, RET1 is set to zero and * RET2 is set to the data read. Insignificant bits in RET2 are not * guarenteed to have any specific value and therefore must be ignored. * * The data returned in RET2 is size based byte swapped. * * If an error occurs during the read, set RET1 to a non-zero value. The * given pci_config_offset must be 'size' aligned. */ #define HV_FAST_PCI_CONFIG_GET 0xb4 /* pci_config_put() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_CONFIG_PUT * ARG0: devhandle * ARG1: pci_device * ARG2: pci_config_offset * ARG3: size * ARG4: data * RET0: status * RET1: error_flag * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size * EBADALIGN pci_config_offset not size aligned * ENOACCESS Access to this offset is not permitted * * Write PCI configuration space for the adapter described by the given * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, * at pci_config_offset from the beginning of the device's configuration * space. The data argument contains the data to be written to configuration * space. Prior to writing, the data is size based byte swapped. * * If an error occurs during the write access, do not generate an error * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. * The given pci_config_offset must be 'size' aligned. * * This function is permitted to read from offset zero in the configuration * space described by the given pci_device if necessary to ensure that the * write access to config space completes. */ #define HV_FAST_PCI_CONFIG_PUT 0xb5 /* pci_peek() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_PEEK * ARG0: devhandle * ARG1: real address * ARG2: size * RET0: status * RET1: error_flag * RET2: data * ERRORS: EINVAL Invalid devhandle or size * EBADALIGN Improperly aligned real address * ENORADDR Bad real address * ENOACCESS Guest access prohibited * * Attempt to read the IO address given by the given devhandle, real address, * and size. Size must be 1, 2, 4, or 8. The read is performed as a single * access operation using the given size. If an error occurs when reading * from the given location, do not generate an error report, but return a * non-zero value in RET1. If the read was successful, return zero in RET1 * and return the actual data read in RET2. The data returned is size based * byte swapped. * * Non-significant bits in RET2 are not guarenteed to have any specific value * and therefore must be ignored. If RET1 is returned as non-zero, the data * value is not guarenteed to have any specific value and should be ignored. * * The caller must have permission to read from the given devhandle, real * address, which must be an IO address. The argument real address must be a * size aligned address. * * The hypervisor implementation of this function must block access to any * IO address that the guest does not have explicit permission to access. */ #define HV_FAST_PCI_PEEK 0xb6 /* pci_poke() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_POKE * ARG0: devhandle * ARG1: real address * ARG2: size * ARG3: data * ARG4: pci_device * RET0: status * RET1: error_flag * ERRORS: EINVAL Invalid devhandle, size, or pci_device * EBADALIGN Improperly aligned real address * ENORADDR Bad real address * ENOACCESS Guest access prohibited * ENOTSUPPORTED Function is not supported by implementation * * Attempt to write data to the IO address given by the given devhandle, * real address, and size. Size must be 1, 2, 4, or 8. The write is * performed as a single access operation using the given size. Prior to * writing the data is size based swapped. * * If an error occurs when writing to the given location, do not generate an * error report, but return a non-zero value in RET1. If the write was * successful, return zero in RET1. * * pci_device describes the configuration address of the device being * written to. The implementation may safely read from offset 0 with * the configuration space of the device described by devhandle and * pci_device in order to guarantee that the write portion of the operation * completes * * Any error that occurs due to the read shall be reported using the normal * error reporting mechanisms .. the read error is not suppressed. * * The caller must have permission to write to the given devhandle, real * address, which must be an IO address. The argument real address must be a * size aligned address. The caller must have permission to read from * the given devhandle, pci_device cofiguration space offset 0. * * The hypervisor implementation of this function must block access to any * IO address that the guest does not have explicit permission to access. */ #define HV_FAST_PCI_POKE 0xb7 /* pci_dma_sync() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_DMA_SYNC * ARG0: devhandle * ARG1: real address * ARG2: size * ARG3: io_sync_direction * RET0: status * RET1: #synced * ERRORS: EINVAL Invalid devhandle or io_sync_direction * ENORADDR Bad real address * * Synchronize a memory region described by the given real address and size, * for the device defined by the given devhandle using the direction(s) * defined by the given io_sync_direction. The argument size is the size of * the memory region in bytes. * * Return the actual number of bytes synchronized in the return value #synced, * which may be less than or equal to the argument size. If the return * value #synced is less than size, the caller must continue to call this * function with updated real address and size arguments until the entire * memory region is synchronized. */ #define HV_FAST_PCI_DMA_SYNC 0xb8 /* PCI MSI services. */ #define HV_MSITYPE_MSI32 0x00 #define HV_MSITYPE_MSI64 0x01 #define HV_MSIQSTATE_IDLE 0x00 #define HV_MSIQSTATE_ERROR 0x01 #define HV_MSIQ_INVALID 0x00 #define HV_MSIQ_VALID 0x01 #define HV_MSISTATE_IDLE 0x00 #define HV_MSISTATE_DELIVERED 0x01 #define HV_MSIVALID_INVALID 0x00 #define HV_MSIVALID_VALID 0x01 #define HV_PCIE_MSGTYPE_PME_MSG 0x18 #define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b #define HV_PCIE_MSGTYPE_CORR_MSG 0x30 #define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 #define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 #define HV_MSG_INVALID 0x00 #define HV_MSG_VALID 0x01 /* pci_msiq_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_CONF * ARG0: devhandle * ARG1: msiqid * ARG2: real address * ARG3: number of entries * RET0: status * ERRORS: EINVAL Invalid devhandle, msiqid or nentries * EBADALIGN Improperly aligned real address * ENORADDR Bad real address * * Configure the MSI queue given by the devhandle and msiqid arguments, * and to be placed at the given real address and be of the given * number of entries. The real address must be aligned exactly to match * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ * Head and Tail are initialized so that the MSI-EQ is 'empty'. * * Implementation Note: Certain implementations have fixed sized queues. In * that case, number of entries must contain the correct * value. */ #define HV_FAST_PCI_MSIQ_CONF 0xc0 /* pci_msiq_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_INFO * ARG0: devhandle * ARG1: msiqid * RET0: status * RET1: real address * RET2: number of entries * ERRORS: EINVAL Invalid devhandle or msiqid * * Return the configuration information for the MSI queue described * by the given devhandle and msiqid. The base address of the queue * is returned in ARG1 and the number of entries is returned in ARG2. * If the queue is unconfigured, the real address is undefined and the * number of entries will be returned as zero. */ #define HV_FAST_PCI_MSIQ_INFO 0xc1 /* pci_msiq_getvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID * ARG0: devhandle * ARG1: msiqid * RET0: status * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) * ERRORS: EINVAL Invalid devhandle or msiqid * * Get the valid state of the MSI-EQ described by the given devhandle and * msiqid. */ #define HV_FAST_PCI_MSIQ_GETVALID 0xc2 /* pci_msiq_setvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID * ARG0: devhandle * ARG1: msiqid * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) * RET0: status * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid * value or MSI EQ is uninitialized * * Set the valid state of the MSI-EQ described by the given devhandle and * msiqid to the given msiqvalid. */ #define HV_FAST_PCI_MSIQ_SETVALID 0xc3 /* pci_msiq_getstate() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE * ARG0: devhandle * ARG1: msiqid * RET0: status * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) * ERRORS: EINVAL Invalid devhandle or msiqid * * Get the state of the MSI-EQ described by the given devhandle and * msiqid. */ #define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 /* pci_msiq_getvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID * ARG0: devhandle * ARG1: msiqid * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) * RET0: status * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate * value or MSI EQ is uninitialized * * Set the state of the MSI-EQ described by the given devhandle and * msiqid to the given msiqvalid. */ #define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 /* pci_msiq_gethead() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD * ARG0: devhandle * ARG1: msiqid * RET0: status * RET1: msiqhead * ERRORS: EINVAL Invalid devhandle or msiqid * * Get the current MSI EQ queue head for the MSI-EQ described by the * given devhandle and msiqid. */ #define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 /* pci_msiq_sethead() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD * ARG0: devhandle * ARG1: msiqid * ARG2: msiqhead * RET0: status * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, * or MSI EQ is uninitialized * * Set the current MSI EQ queue head for the MSI-EQ described by the * given devhandle and msiqid. */ #define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 /* pci_msiq_gettail() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL * ARG0: devhandle * ARG1: msiqid * RET0: status * RET1: msiqtail * ERRORS: EINVAL Invalid devhandle or msiqid * * Get the current MSI EQ queue tail for the MSI-EQ described by the * given devhandle and msiqid. */ #define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 /* pci_msi_getvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_GETVALID * ARG0: devhandle * ARG1: msinum * RET0: status * RET1: msivalidstate * ERRORS: EINVAL Invalid devhandle or msinum * * Get the current valid/enabled state for the MSI defined by the * given devhandle and msinum. */ #define HV_FAST_PCI_MSI_GETVALID 0xc9 /* pci_msi_setvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_SETVALID * ARG0: devhandle * ARG1: msinum * ARG2: msivalidstate * RET0: status * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate * * Set the current valid/enabled state for the MSI defined by the * given devhandle and msinum. */ #define HV_FAST_PCI_MSI_SETVALID 0xca /* pci_msi_getmsiq() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ * ARG0: devhandle * ARG1: msinum * RET0: status * RET1: msiqid * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound * * Get the MSI EQ that the MSI defined by the given devhandle and * msinum is bound to. */ #define HV_FAST_PCI_MSI_GETMSIQ 0xcb /* pci_msi_setmsiq() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ * ARG0: devhandle * ARG1: msinum * ARG2: msitype * ARG3: msiqid * RET0: status * ERRORS: EINVAL Invalid devhandle or msinum or msiqid * * Set the MSI EQ that the MSI defined by the given devhandle and * msinum is bound to. */ #define HV_FAST_PCI_MSI_SETMSIQ 0xcc /* pci_msi_getstate() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_GETSTATE * ARG0: devhandle * ARG1: msinum * RET0: status * RET1: msistate * ERRORS: EINVAL Invalid devhandle or msinum * * Get the state of the MSI defined by the given devhandle and msinum. * If not initialized, return HV_MSISTATE_IDLE. */ #define HV_FAST_PCI_MSI_GETSTATE 0xcd /* pci_msi_setstate() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSI_SETSTATE * ARG0: devhandle * ARG1: msinum * ARG2: msistate * RET0: status * ERRORS: EINVAL Invalid devhandle or msinum or msistate * * Set the state of the MSI defined by the given devhandle and msinum. */ #define HV_FAST_PCI_MSI_SETSTATE 0xce /* pci_msg_getmsiq() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ * ARG0: devhandle * ARG1: msgtype * RET0: status * RET1: msiqid * ERRORS: EINVAL Invalid devhandle or msgtype * * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. */ #define HV_FAST_PCI_MSG_GETMSIQ 0xd0 /* pci_msg_setmsiq() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ * ARG0: devhandle * ARG1: msgtype * ARG2: msiqid * RET0: status * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid * * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. */ #define HV_FAST_PCI_MSG_SETMSIQ 0xd1 /* pci_msg_getvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSG_GETVALID * ARG0: devhandle * ARG1: msgtype * RET0: status * RET1: msgvalidstate * ERRORS: EINVAL Invalid devhandle or msgtype * * Get the valid/enabled state of the MSG defined by the given * devhandle and msgtype. */ #define HV_FAST_PCI_MSG_GETVALID 0xd2 /* pci_msg_setvalid() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_MSG_SETVALID * ARG0: devhandle * ARG1: msgtype * ARG2: msgvalidstate * RET0: status * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate * * Set the valid/enabled state of the MSG defined by the given * devhandle and msgtype. */ #define HV_FAST_PCI_MSG_SETVALID 0xd3 /* Logical Domain Channel services. */ #define LDC_CHANNEL_DOWN 0 #define LDC_CHANNEL_UP 1 #define LDC_CHANNEL_RESETTING 2 /* ldc_tx_qconf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_TX_QCONF * ARG0: channel ID * ARG1: real address base of queue * ARG2: num entries in queue * RET0: status * * Configure transmit queue for the LDC endpoint specified by the * given channel ID, to be placed at the given real address, and * be of the given num entries. Num entries must be a power of two. * The real address base of the queue must be aligned on the queue * size. Each queue entry is 64-bytes, so for example, a 32 entry * queue must be aligned on a 2048 byte real address boundary. * * Upon configuration of a valid transmit queue the head and tail * pointers are set to a hypervisor specific identical value indicating * that the queue initially is empty. * * The endpoint's transmit queue is un-configured if num entries is zero. * * The maximum number of entries for each queue for a specific cpu may be * determined from the machine description. A transmit queue may be * specified even in the event that the LDC is down (peer endpoint has no * receive queue specified). Transmission will begin as soon as the peer * endpoint defines a receive queue. * * It is recommended that a guest wait for a transmit queue to empty prior * to reconfiguring it, or un-configuring it. Re or un-configuring of a * non-empty transmit queue behaves exactly as defined above, however it * is undefined as to how many of the pending entries in the original queue * will be delivered prior to the re-configuration taking effect. * Furthermore, as the queue configuration causes a reset of the head and * tail pointers there is no way for a guest to determine how many entries * have been sent after the configuration operation. */ #define HV_FAST_LDC_TX_QCONF 0xe0 /* ldc_tx_qinfo() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_TX_QINFO * ARG0: channel ID * RET0: status * RET1: real address base of queue * RET2: num entries in queue * * Return the configuration info for the transmit queue of LDC endpoint * defined by the given channel ID. The real address is the currently * defined real address base of the defined queue, and num entries is the * size of the queue in terms of number of entries. * * If the specified channel ID is a valid endpoint number, but no transmit * queue has been defined this service will return success, but with num * entries set to zero and the real address will have an undefined value. */ #define HV_FAST_LDC_TX_QINFO 0xe1 /* ldc_tx_get_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_TX_GET_STATE * ARG0: channel ID * RET0: status * RET1: head offset * RET2: tail offset * RET3: channel state * * Return the transmit state, and the head and tail queue pointers, for * the transmit queue of the LDC endpoint defined by the given channel ID. * The head and tail values are the byte offset of the head and tail * positions of the transmit queue for the specified endpoint. */ #define HV_FAST_LDC_TX_GET_STATE 0xe2 /* ldc_tx_set_qtail() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL * ARG0: channel ID * ARG1: tail offset * RET0: status * * Update the tail pointer for the transmit queue associated with the LDC * endpoint defined by the given channel ID. The tail offset specified * must be aligned on a 64 byte boundary, and calculated so as to increase * the number of pending entries on the transmit queue. Any attempt to * decrease the number of pending transmit queue entires is considered * an invalid tail offset and will result in an EINVAL error. * * Since the tail of the transmit queue may not be moved backwards, the * transmit queue may be flushed by configuring a new transmit queue, * whereupon the hypervisor will configure the initial transmit head and * tail pointers to be equal. */ #define HV_FAST_LDC_TX_SET_QTAIL 0xe3 /* ldc_rx_qconf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_RX_QCONF * ARG0: channel ID * ARG1: real address base of queue * ARG2: num entries in queue * RET0: status * * Configure receive queue for the LDC endpoint specified by the * given channel ID, to be placed at the given real address, and * be of the given num entries. Num entries must be a power of two. * The real address base of the queue must be aligned on the queue * size. Each queue entry is 64-bytes, so for example, a 32 entry * queue must be aligned on a 2048 byte real address boundary. * * The endpoint's transmit queue is un-configured if num entries is zero. * * If a valid receive queue is specified for a local endpoint the LDC is * in the up state for the purpose of transmission to this endpoint. * * The maximum number of entries for each queue for a specific cpu may be * determined from the machine description. * * As receive queue configuration causes a reset of the queue's head and * tail pointers there is no way for a gues to determine how many entries * have been received between a preceeding ldc_get_rx_state() API call * and the completion of the configuration operation. It should be noted * that datagram delivery is not guarenteed via domain channels anyway, * and therefore any higher protocol should be resilient to datagram * loss if necessary. However, to overcome this specific race potential * it is recommended, for example, that a higher level protocol be employed * to ensure either retransmission, or ensure that no datagrams are pending * on the peer endpoint's transmit queue prior to the configuration process. */ #define HV_FAST_LDC_RX_QCONF 0xe4 /* ldc_rx_qinfo() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_RX_QINFO * ARG0: channel ID * RET0: status * RET1: real address base of queue * RET2: num entries in queue * * Return the configuration info for the receive queue of LDC endpoint * defined by the given channel ID. The real address is the currently * defined real address base of the defined queue, and num entries is the * size of the queue in terms of number of entries. * * If the specified channel ID is a valid endpoint number, but no receive * queue has been defined this service will return success, but with num * entries set to zero and the real address will have an undefined value. */ #define HV_FAST_LDC_RX_QINFO 0xe5 /* ldc_rx_get_state() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_RX_GET_STATE * ARG0: channel ID * RET0: status * RET1: head offset * RET2: tail offset * RET3: channel state * * Return the receive state, and the head and tail queue pointers, for * the receive queue of the LDC endpoint defined by the given channel ID. * The head and tail values are the byte offset of the head and tail * positions of the receive queue for the specified endpoint. */ #define HV_FAST_LDC_RX_GET_STATE 0xe6 /* ldc_rx_set_qhead() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD * ARG0: channel ID * ARG1: head offset * RET0: status * * Update the head pointer for the receive queue associated with the LDC * endpoint defined by the given channel ID. The head offset specified * must be aligned on a 64 byte boundary, and calculated so as to decrease * the number of pending entries on the receive queue. Any attempt to * increase the number of pending receive queue entires is considered * an invalid head offset and will result in an EINVAL error. * * The receive queue may be flushed by setting the head offset equal * to the current tail offset. */ #define HV_FAST_LDC_RX_SET_QHEAD 0xe7 /* LDC Map Table Entry. Each slot is defined by a translation table * entry, as specified by the LDC_MTE_* bits below, and a 64-bit * hypervisor invalidation cookie. */ #define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ #define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ #define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ #define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ #define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ #define LDC_MTE_EXEC 0x0000000000000040 /* execute */ #define LDC_MTE_WRITE 0x0000000000000020 /* read */ #define LDC_MTE_READ 0x0000000000000010 /* write */ #define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ #define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ #define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ #define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ #define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ #define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ #define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ #define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ #define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ #ifndef __ASSEMBLY__ struct ldc_mtable_entry { unsigned long mte; unsigned long cookie; }; #endif /* ldc_set_map_table() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE * ARG0: channel ID * ARG1: table real address * ARG2: num entries * RET0: status * * Register the MTE table at the given table real address, with the * specified num entries, for the LDC indicated by the given channel * ID. */ #define HV_FAST_LDC_SET_MAP_TABLE 0xea /* ldc_get_map_table() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE * ARG0: channel ID * RET0: status * RET1: table real address * RET2: num entries * * Return the configuration of the current mapping table registered * for the given channel ID. */ #define HV_FAST_LDC_GET_MAP_TABLE 0xeb #define LDC_COPY_IN 0 #define LDC_COPY_OUT 1 /* ldc_copy() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_COPY * ARG0: channel ID * ARG1: LDC_COPY_* direction code * ARG2: target real address * ARG3: local real address * ARG4: length in bytes * RET0: status * RET1: actual length in bytes */ #define HV_FAST_LDC_COPY 0xec #define LDC_MEM_READ 1 #define LDC_MEM_WRITE 2 #define LDC_MEM_EXEC 4 /* ldc_mapin() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_MAPIN * ARG0: channel ID * ARG1: cookie * RET0: status * RET1: real address * RET2: LDC_MEM_* permissions */ #define HV_FAST_LDC_MAPIN 0xed /* ldc_unmap() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_UNMAP * ARG0: real address * RET0: status */ #define HV_FAST_LDC_UNMAP 0xee /* ldc_revoke() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_LDC_REVOKE * ARG0: channel ID * ARG1: cookie * ARG2: ldc_mtable_entry cookie * RET0: status */ #define HV_FAST_LDC_REVOKE 0xef #ifndef __ASSEMBLY__ extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, unsigned long ra, unsigned long num_entries); extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, unsigned long *ra, unsigned long *num_entries); extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, unsigned long *head_off, unsigned long *tail_off, unsigned long *chan_state); extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, unsigned long tail_off); extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, unsigned long ra, unsigned long num_entries); extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, unsigned long *ra, unsigned long *num_entries); extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, unsigned long *head_off, unsigned long *tail_off, unsigned long *chan_state); extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, unsigned long head_off); extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, unsigned long ra, unsigned long num_entries); extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, unsigned long *ra, unsigned long *num_entries); extern unsigned long sun4v_ldc_copy(unsigned long channel, unsigned long dir_code, unsigned long tgt_raddr, unsigned long lcl_raddr, unsigned long len, unsigned long *actual_len); extern unsigned long sun4v_ldc_mapin(unsigned long channel, unsigned long cookie, unsigned long *ra, unsigned long *perm); extern unsigned long sun4v_ldc_unmap(unsigned long ra); extern unsigned long sun4v_ldc_revoke(unsigned long channel, unsigned long cookie, unsigned long mte_cookie); #endif /* Performance counter services. */ #define HV_PERF_JBUS_PERF_CTRL_REG 0x00 #define HV_PERF_JBUS_PERF_CNT_REG 0x01 #define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 #define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 #define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 #define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 #define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 #define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 #define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 #define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 /* get_perfreg() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_GET_PERFREG * ARG0: performance reg number * RET0: status * RET1: performance reg value * ERRORS: EINVAL Invalid performance register number * ENOACCESS No access allowed to performance counters * * Read the value of the given DRAM/JBUS performance counter/control register. */ #define HV_FAST_GET_PERFREG 0x100 /* set_perfreg() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_SET_PERFREG * ARG0: performance reg number * ARG1: performance reg value * RET0: status * ERRORS: EINVAL Invalid performance register number * ENOACCESS No access allowed to performance counters * * Write the given performance reg value to the given DRAM/JBUS * performance counter/control register. */ #define HV_FAST_SET_PERFREG 0x101 #define HV_N2_PERF_SPARC_CTL 0x0 #define HV_N2_PERF_DRAM_CTL0 0x1 #define HV_N2_PERF_DRAM_CNT0 0x2 #define HV_N2_PERF_DRAM_CTL1 0x3 #define HV_N2_PERF_DRAM_CNT1 0x4 #define HV_N2_PERF_DRAM_CTL2 0x5 #define HV_N2_PERF_DRAM_CNT2 0x6 #define HV_N2_PERF_DRAM_CTL3 0x7 #define HV_N2_PERF_DRAM_CNT3 0x8 #define HV_FAST_N2_GET_PERFREG 0x104 #define HV_FAST_N2_SET_PERFREG 0x105 #ifndef __ASSEMBLY__ extern unsigned long sun4v_niagara_getperf(unsigned long reg, unsigned long *val); extern unsigned long sun4v_niagara_setperf(unsigned long reg, unsigned long val); extern unsigned long sun4v_niagara2_getperf(unsigned long reg, unsigned long *val); extern unsigned long sun4v_niagara2_setperf(unsigned long reg, unsigned long val); #endif /* MMU statistics services. * * The hypervisor maintains MMU statistics and privileged code provides * a buffer where these statistics can be collected. It is continually * updated once configured. The layout is as follows: */ #ifndef __ASSEMBLY__ struct hv_mmu_statistics { unsigned long immu_tsb_hits_ctx0_8k_tte; unsigned long immu_tsb_ticks_ctx0_8k_tte; unsigned long immu_tsb_hits_ctx0_64k_tte; unsigned long immu_tsb_ticks_ctx0_64k_tte; unsigned long __reserved1[2]; unsigned long immu_tsb_hits_ctx0_4mb_tte; unsigned long immu_tsb_ticks_ctx0_4mb_tte; unsigned long __reserved2[2]; unsigned long immu_tsb_hits_ctx0_256mb_tte; unsigned long immu_tsb_ticks_ctx0_256mb_tte; unsigned long __reserved3[4]; unsigned long immu_tsb_hits_ctxnon0_8k_tte; unsigned long immu_tsb_ticks_ctxnon0_8k_tte; unsigned long immu_tsb_hits_ctxnon0_64k_tte; unsigned long immu_tsb_ticks_ctxnon0_64k_tte; unsigned long __reserved4[2]; unsigned long immu_tsb_hits_ctxnon0_4mb_tte; unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; unsigned long __reserved5[2]; unsigned long immu_tsb_hits_ctxnon0_256mb_tte; unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; unsigned long __reserved6[4]; unsigned long dmmu_tsb_hits_ctx0_8k_tte; unsigned long dmmu_tsb_ticks_ctx0_8k_tte; unsigned long dmmu_tsb_hits_ctx0_64k_tte; unsigned long dmmu_tsb_ticks_ctx0_64k_tte; unsigned long __reserved7[2]; unsigned long dmmu_tsb_hits_ctx0_4mb_tte; unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; unsigned long __reserved8[2]; unsigned long dmmu_tsb_hits_ctx0_256mb_tte; unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; unsigned long __reserved9[4]; unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; unsigned long __reserved10[2]; unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; unsigned long __reserved11[2]; unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; unsigned long __reserved12[4]; }; #endif /* mmustat_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMUSTAT_CONF * ARG0: real address * RET0: status * RET1: real address * ERRORS: ENORADDR Invalid real address * EBADALIGN Real address not aligned on 64-byte boundary * EBADTRAP API not supported on this processor * * Enable MMU statistic gathering using the buffer at the given real * address on the current virtual CPU. The new buffer real address * is given in ARG1, and the previously specified buffer real address * is returned in RET1, or is returned as zero for the first invocation. * * If the passed in real address argument is zero, this will disable * MMU statistic collection on the current virtual CPU. If an error is * returned then no statistics are collected. * * The buffer contents should be initialized to all zeros before being * given to the hypervisor or else the statistics will be meaningless. */ #define HV_FAST_MMUSTAT_CONF 0x102 /* mmustat_info() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMUSTAT_INFO * RET0: status * RET1: real address * ERRORS: EBADTRAP API not supported on this processor * * Return the current state and real address of the currently configured * MMU statistics buffer on the current virtual CPU. */ #define HV_FAST_MMUSTAT_INFO 0x103 #ifndef __ASSEMBLY__ extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); extern unsigned long sun4v_mmustat_info(unsigned long *ra); #endif /* NCS crypto services */ /* ncs_request() sub-function numbers */ #define HV_NCS_QCONF 0x01 #define HV_NCS_QTAIL_UPDATE 0x02 #ifndef __ASSEMBLY__ struct hv_ncs_queue_entry { /* MAU Control Register */ unsigned long mau_control; #define MAU_CONTROL_INV_PARITY 0x0000000000002000 #define MAU_CONTROL_STRAND 0x0000000000001800 #define MAU_CONTROL_BUSY 0x0000000000000400 #define MAU_CONTROL_INT 0x0000000000000200 #define MAU_CONTROL_OP 0x00000000000001c0 #define MAU_CONTROL_OP_SHIFT 6 #define MAU_OP_LOAD_MA_MEMORY 0x0 #define MAU_OP_STORE_MA_MEMORY 0x1 #define MAU_OP_MODULAR_MULT 0x2 #define MAU_OP_MODULAR_REDUCE 0x3 #define MAU_OP_MODULAR_EXP_LOOP 0x4 #define MAU_CONTROL_LEN 0x000000000000003f #define MAU_CONTROL_LEN_SHIFT 0 /* Real address of bytes to load or store bytes * into/out-of the MAU. */ unsigned long mau_mpa; /* Modular Arithmetic MA Offset Register. */ unsigned long mau_ma; /* Modular Arithmetic N Prime Register. */ unsigned long mau_np; }; struct hv_ncs_qconf_arg { unsigned long mid; /* MAU ID, 1 per core on Niagara */ unsigned long base; /* Real address base of queue */ unsigned long end; /* Real address end of queue */ unsigned long num_ents; /* Number of entries in queue */ }; struct hv_ncs_qtail_update_arg { unsigned long mid; /* MAU ID, 1 per core on Niagara */ unsigned long tail; /* New tail index to use */ unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ #define HV_NCS_SYNCFLAG_SYNC 0x00 #define HV_NCS_SYNCFLAG_ASYNC 0x01 }; #endif /* ncs_request() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_NCS_REQUEST * ARG0: NCS sub-function * ARG1: sub-function argument real address * ARG2: size in bytes of sub-function argument * RET0: status * * The MAU chip of the Niagara processor is not directly accessible * to privileged code, instead it is programmed indirectly via this * hypervisor API. * * The interfaces defines a queue of MAU operations to perform. * Privileged code registers a queue with the hypervisor by invoking * this HVAPI with the HV_NCS_QCONF sub-function, which defines the * base, end, and number of entries of the queue. Each queue entry * contains a MAU register struct block. * * The privileged code then proceeds to add entries to the queue and * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only * synchronous operations are supported by the current hypervisor, * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to * completion and return HV_EOK, or return an error code. * * The real address of the sub-function argument must be aligned on at * least an 8-byte boundary. * * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte * offset, into the queue and must be less than or equal the 'num_ents' * argument given in the HV_NCS_QCONF call. */ #define HV_FAST_NCS_REQUEST 0x110 #ifndef __ASSEMBLY__ extern unsigned long sun4v_ncs_request(unsigned long request, unsigned long arg_ra, unsigned long arg_size); #endif #define HV_FAST_FIRE_GET_PERFREG 0x120 #define HV_FAST_FIRE_SET_PERFREG 0x121 /* Function numbers for HV_CORE_TRAP. */ #define HV_CORE_SET_VER 0x00 #define HV_CORE_PUTCHAR 0x01 #define HV_CORE_EXIT 0x02 #define HV_CORE_GET_VER 0x03 /* Hypervisor API groups for use with HV_CORE_SET_VER and * HV_CORE_GET_VER. */ #define HV_GRP_SUN4V 0x0000 #define HV_GRP_CORE 0x0001 #define HV_GRP_INTR 0x0002 #define HV_GRP_SOFT_STATE 0x0003 #define HV_GRP_PCI 0x0100 #define HV_GRP_LDOM 0x0101 #define HV_GRP_SVC_CHAN 0x0102 #define HV_GRP_NCS 0x0103 #define HV_GRP_RNG 0x0104 #define HV_GRP_NIAG_PERF 0x0200 #define HV_GRP_FIRE_PERF 0x0201 #define HV_GRP_N2_CPU 0x0202 #define HV_GRP_NIU 0x0204 #define HV_GRP_VF_CPU 0x0205 #define HV_GRP_DIAG 0x0300 #ifndef __ASSEMBLY__ extern unsigned long sun4v_get_version(unsigned long group, unsigned long *major, unsigned long *minor); extern unsigned long sun4v_set_version(unsigned long group, unsigned long major, unsigned long minor, unsigned long *actual_minor); extern int sun4v_hvapi_register(unsigned long group, unsigned long major, unsigned long *minor); extern void sun4v_hvapi_unregister(unsigned long group); extern int sun4v_hvapi_get(unsigned long group, unsigned long *major, unsigned long *minor); extern void sun4v_hvapi_init(void); #endif #endif /* !(_SPARC64_HYPERVISOR_H) */