config BF51x def_bool y depends on (BF512 || BF514 || BF516 || BF518) if (BF51x) source "arch/blackfin/mach-bf518/boards/Kconfig" menu "BF518 Specific Configuration" comment "Alternative Multiplexing Scheme" choice prompt "PWM Channel Pins" default BF518_PWM_ALL_PORTF help Select pins used for the PWM channels: PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL See the Hardware Reference Manual for more details. config BF518_PWM_ALL_PORTF bool "PF1 - PF6" help PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL} config BF518_PWM_PORTF_PORTG bool "PF11 - PF14 / PG1 - PG2" help PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL} PG{1,2} <-> PWM_{CH,CL} endchoice choice prompt "PWM Sync Pin" default BF518_PWM_SYNC_PF7 help Select the pin used for PWM_SYNC. See the Hardware Reference Manual for more details. config BF518_PWM_SYNC_PF7 bool "PF7" config BF518_PWM_SYNC_PF15 bool "PF15" endchoice choice prompt "PWM Trip B Pin" default BF518_PWM_TRIPB_PG10 help Select the pin used for PWM_TRIPB. See the Hardware Reference Manual for more details. config BF518_PWM_TRIPB_PG10 bool "PG10" config BF518_PWM_TRIPB_PG14 bool "PG14" endchoice choice prompt "PPI / Timer Pins" default BF518_PPI_TMR_PG5 help Select pins used for PPI/Timer: PPICLK PPIFS1 PPIFS2 TMRCLK TMR0 TMR1 See the Hardware Reference Manual for more details. config BF518_PPI_TMR_PG5 bool "PG5 - PG7" help PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} config BF518_PPI_TMR_PG12 bool "PG12 - PG14" help PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2} endchoice comment "Hysteresis/Schmitt Trigger Control" config BFIN_HYSTERESIS_CONTROL bool "Enable Hysteresis Control" help The ADSP-BF51x allows to control input hysteresis for Port F, Port G and Port H and other processor signal inputs. The Schmitt trigger enables can be set only for pin groups. Saying Y will overwrite the default reset or boot loader initialization. menu "PORT F" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTF_0_7 bool "Enable Hysteresis on PORTF {0...7}" config GPIO_HYST_PORTF_8_9 bool "Enable Hysteresis on PORTF {8, 9}" config GPIO_HYST_PORTF_10 bool "Enable Hysteresis on PORTF 10" config GPIO_HYST_PORTF_11 bool "Enable Hysteresis on PORTF 11" config GPIO_HYST_PORTF_12_13 bool "Enable Hysteresis on PORTF {12, 13}" config GPIO_HYST_PORTF_14_15 bool "Enable Hysteresis on PORTF {14, 15}" endmenu menu "PORT G" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTG_0 bool "Enable Hysteresis on PORTG 0" config GPIO_HYST_PORTG_1_4 bool "Enable Hysteresis on PORTG {1...4}" config GPIO_HYST_PORTG_5_6 bool "Enable Hysteresis on PORTG {5, 6}" config GPIO_HYST_PORTG_7_8 bool "Enable Hysteresis on PORTG {7, 8}" config GPIO_HYST_PORTG_9 bool "Enable Hysteresis on PORTG 9" config GPIO_HYST_PORTG_10 bool "Enable Hysteresis on PORTG 10" config GPIO_HYST_PORTG_11_13 bool "Enable Hysteresis on PORTG {11...13}" config GPIO_HYST_PORTG_14_15 bool "Enable Hysteresis on PORTG {14, 15}" endmenu menu "PORT H" depends on BFIN_HYSTERESIS_CONTROL config GPIO_HYST_PORTH_0_7 bool "Enable Hysteresis on PORTH {0...7}" endmenu menu "None-GPIO" depends on BFIN_HYSTERESIS_CONTROL config NONEGPIO_HYST_NMI_RST_BMODE bool "Enable Hysteresis on {NMI, RESET, BMODE}" config NONEGPIO_HYST_JTAG bool "Enable Hysteresis on JTAG" endmenu comment "Interrupt Priority Assignment" menu "Priority" config IRQ_PLL_WAKEUP int "IRQ_PLL_WAKEUP" default 7 config IRQ_DMA0_ERROR int "IRQ_DMA0_ERROR" default 7 config IRQ_DMAR0_BLK int "IRQ_DMAR0_BLK" default 7 config IRQ_DMAR1_BLK int "IRQ_DMAR1_BLK" default 7 config IRQ_DMAR0_OVR int "IRQ_DMAR0_OVR" default 7 config IRQ_DMAR1_OVR int "IRQ_DMAR1_OVR" default 7 config IRQ_PPI_ERROR int "IRQ_PPI_ERROR" default 7 config IRQ_MAC_ERROR int "IRQ_MAC_ERROR" default 7 config IRQ_SPORT0_ERROR int "IRQ_SPORT0_ERROR" default 7 config IRQ_SPORT1_ERROR int "IRQ_SPORT1_ERROR" default 7 config IRQ_PTP_ERROR int "IRQ_PTP_ERROR" default 7 config IRQ_UART0_ERROR int "IRQ_UART0_ERROR" default 7 config IRQ_UART1_ERROR int "IRQ_UART1_ERROR" default 7 config IRQ_RTC int "IRQ_RTC" default 8 config IRQ_PPI int "IRQ_PPI" default 8 config IRQ_SPORT0_RX int "IRQ_SPORT0_RX" default 9 config IRQ_SPORT0_TX int "IRQ_SPORT0_TX" default 9 config IRQ_SPORT1_RX int "IRQ_SPORT1_RX" default 9 config IRQ_SPORT1_TX int "IRQ_SPORT1_TX" default 9 config IRQ_TWI int "IRQ_TWI" default 10 config IRQ_SPI0 int "IRQ_SPI" default 10 config IRQ_UART0_RX int "IRQ_UART0_RX" default 10 config IRQ_UART0_TX int "IRQ_UART0_TX" default 10 config IRQ_UART1_RX int "IRQ_UART1_RX" default 10 config IRQ_UART1_TX int "IRQ_UART1_TX" default 10 config IRQ_OPTSEC int "IRQ_OPTSEC" default 11 config IRQ_CNT int "IRQ_CNT" default 11 config IRQ_MAC_RX int "IRQ_MAC_RX" default 11 config IRQ_PORTH_INTA int "IRQ_PORTH_INTA" default 11 config IRQ_MAC_TX int "IRQ_MAC_TX/NFC" default 11 config IRQ_PORTH_INTB int "IRQ_PORTH_INTB" default 11 config IRQ_TIMER0 int "IRQ_TIMER0" default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" default 12 config IRQ_TIMER2 int "IRQ_TIMER2" default 12 config IRQ_TIMER3 int "IRQ_TIMER3" default 12 config IRQ_TIMER4 int "IRQ_TIMER4" default 12 config IRQ_TIMER5 int "IRQ_TIMER5" default 12 config IRQ_TIMER6 int "IRQ_TIMER6" default 12 config IRQ_TIMER7 int "IRQ_TIMER7" default 12 config IRQ_PORTG_INTA int "IRQ_PORTG_INTA" default 12 config IRQ_PORTG_INTB int "IRQ_PORTG_INTB" default 12 config IRQ_MEM_DMA0 int "IRQ_MEM_DMA0" default 13 config IRQ_MEM_DMA1 int "IRQ_MEM_DMA1" default 13 config IRQ_WATCH int "IRQ_WATCH" default 13 config IRQ_PORTF_INTA int "IRQ_PORTF_INTA" default 13 config IRQ_PORTF_INTB int "IRQ_PORTF_INTB" default 13 config IRQ_SPI0_ERROR int "IRQ_SPI0_ERROR" default 7 config IRQ_SPI1_ERROR int "IRQ_SPI1_ERROR" default 7 config IRQ_RSI_INT0 int "IRQ_RSI_INT0" default 7 config IRQ_RSI_INT1 int "IRQ_RSI_INT1" default 7 config IRQ_PWM_TRIP int "IRQ_PWM_TRIP" default 10 config IRQ_PWM_SYNC int "IRQ_PWM_SYNC" default 10 config IRQ_PTP_STAT int "IRQ_PTP_STAT" default 10 help Enter the priority numbers between 7-13 ONLY. Others are Reserved. This applies to all the above. It is not recommended to assign the highest priority number 7 to UART or any other device. endmenu endmenu endif