ASoC: Fix incorrect register cache size configuration
[linux-2.6.git] / sound / soc / codecs / wm8993.c
1 /*
2  * wm8993.c -- WM8993 ALSA SoC audio driver
3  *
4  * Copyright 2009, 2010 Wolfson Microelectronics plc
5  *
6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 #include <linux/module.h>
14 #include <linux/moduleparam.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/pm.h>
18 #include <linux/i2c.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/spi/spi.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/tlv.h>
26 #include <sound/soc.h>
27 #include <sound/soc-dapm.h>
28 #include <sound/initval.h>
29 #include <sound/wm8993.h>
30
31 #include "wm8993.h"
32 #include "wm_hubs.h"
33
34 #define WM8993_NUM_SUPPLIES 6
35 static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
36         "DCVDD",
37         "DBVDD",
38         "AVDD1",
39         "AVDD2",
40         "CPVDD",
41         "SPKVDD",
42 };
43
44 static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
45         0x8993,     /* R0   - Software Reset */
46         0x0000,     /* R1   - Power Management (1) */
47         0x6000,     /* R2   - Power Management (2) */
48         0x0000,     /* R3   - Power Management (3) */
49         0x4050,     /* R4   - Audio Interface (1) */
50         0x4000,     /* R5   - Audio Interface (2) */
51         0x01C8,     /* R6   - Clocking 1 */
52         0x0000,     /* R7   - Clocking 2 */
53         0x0000,     /* R8   - Audio Interface (3) */
54         0x0040,     /* R9   - Audio Interface (4) */
55         0x0004,     /* R10  - DAC CTRL */
56         0x00C0,     /* R11  - Left DAC Digital Volume */
57         0x00C0,     /* R12  - Right DAC Digital Volume */
58         0x0000,     /* R13  - Digital Side Tone */
59         0x0300,     /* R14  - ADC CTRL */
60         0x00C0,     /* R15  - Left ADC Digital Volume */
61         0x00C0,     /* R16  - Right ADC Digital Volume */
62         0x0000,     /* R17 */
63         0x0000,     /* R18  - GPIO CTRL 1 */
64         0x0010,     /* R19  - GPIO1 */
65         0x0000,     /* R20  - IRQ_DEBOUNCE */
66         0x0000,     /* R21 */
67         0x8000,     /* R22  - GPIOCTRL 2 */
68         0x0800,     /* R23  - GPIO_POL */
69         0x008B,     /* R24  - Left Line Input 1&2 Volume */
70         0x008B,     /* R25  - Left Line Input 3&4 Volume */
71         0x008B,     /* R26  - Right Line Input 1&2 Volume */
72         0x008B,     /* R27  - Right Line Input 3&4 Volume */
73         0x006D,     /* R28  - Left Output Volume */
74         0x006D,     /* R29  - Right Output Volume */
75         0x0066,     /* R30  - Line Outputs Volume */
76         0x0020,     /* R31  - HPOUT2 Volume */
77         0x0079,     /* R32  - Left OPGA Volume */
78         0x0079,     /* R33  - Right OPGA Volume */
79         0x0003,     /* R34  - SPKMIXL Attenuation */
80         0x0003,     /* R35  - SPKMIXR Attenuation */
81         0x0011,     /* R36  - SPKOUT Mixers */
82         0x0100,     /* R37  - SPKOUT Boost */
83         0x0079,     /* R38  - Speaker Volume Left */
84         0x0079,     /* R39  - Speaker Volume Right */
85         0x0000,     /* R40  - Input Mixer2 */
86         0x0000,     /* R41  - Input Mixer3 */
87         0x0000,     /* R42  - Input Mixer4 */
88         0x0000,     /* R43  - Input Mixer5 */
89         0x0000,     /* R44  - Input Mixer6 */
90         0x0000,     /* R45  - Output Mixer1 */
91         0x0000,     /* R46  - Output Mixer2 */
92         0x0000,     /* R47  - Output Mixer3 */
93         0x0000,     /* R48  - Output Mixer4 */
94         0x0000,     /* R49  - Output Mixer5 */
95         0x0000,     /* R50  - Output Mixer6 */
96         0x0000,     /* R51  - HPOUT2 Mixer */
97         0x0000,     /* R52  - Line Mixer1 */
98         0x0000,     /* R53  - Line Mixer2 */
99         0x0000,     /* R54  - Speaker Mixer */
100         0x0000,     /* R55  - Additional Control */
101         0x0000,     /* R56  - AntiPOP1 */
102         0x0000,     /* R57  - AntiPOP2 */
103         0x0000,     /* R58  - MICBIAS */
104         0x0000,     /* R59 */
105         0x0000,     /* R60  - FLL Control 1 */
106         0x0000,     /* R61  - FLL Control 2 */
107         0x0000,     /* R62  - FLL Control 3 */
108         0x2EE0,     /* R63  - FLL Control 4 */
109         0x0002,     /* R64  - FLL Control 5 */
110         0x2287,     /* R65  - Clocking 3 */
111         0x025F,     /* R66  - Clocking 4 */
112         0x0000,     /* R67  - MW Slave Control */
113         0x0000,     /* R68 */
114         0x0002,     /* R69  - Bus Control 1 */
115         0x0000,     /* R70  - Write Sequencer 0 */
116         0x0000,     /* R71  - Write Sequencer 1 */
117         0x0000,     /* R72  - Write Sequencer 2 */
118         0x0000,     /* R73  - Write Sequencer 3 */
119         0x0000,     /* R74  - Write Sequencer 4 */
120         0x0000,     /* R75  - Write Sequencer 5 */
121         0x1F25,     /* R76  - Charge Pump 1 */
122         0x0000,     /* R77 */
123         0x0000,     /* R78 */
124         0x0000,     /* R79 */
125         0x0000,     /* R80 */
126         0x0000,     /* R81  - Class W 0 */
127         0x0000,     /* R82 */
128         0x0000,     /* R83 */
129         0x0000,     /* R84  - DC Servo 0 */
130         0x054A,     /* R85  - DC Servo 1 */
131         0x0000,     /* R86 */
132         0x0000,     /* R87  - DC Servo 3 */
133         0x0000,     /* R88  - DC Servo Readback 0 */
134         0x0000,     /* R89  - DC Servo Readback 1 */
135         0x0000,     /* R90  - DC Servo Readback 2 */
136         0x0000,     /* R91 */
137         0x0000,     /* R92 */
138         0x0000,     /* R93 */
139         0x0000,     /* R94 */
140         0x0000,     /* R95 */
141         0x0100,     /* R96  - Analogue HP 0 */
142         0x0000,     /* R97 */
143         0x0000,     /* R98  - EQ1 */
144         0x000C,     /* R99  - EQ2 */
145         0x000C,     /* R100 - EQ3 */
146         0x000C,     /* R101 - EQ4 */
147         0x000C,     /* R102 - EQ5 */
148         0x000C,     /* R103 - EQ6 */
149         0x0FCA,     /* R104 - EQ7 */
150         0x0400,     /* R105 - EQ8 */
151         0x00D8,     /* R106 - EQ9 */
152         0x1EB5,     /* R107 - EQ10 */
153         0xF145,     /* R108 - EQ11 */
154         0x0B75,     /* R109 - EQ12 */
155         0x01C5,     /* R110 - EQ13 */
156         0x1C58,     /* R111 - EQ14 */
157         0xF373,     /* R112 - EQ15 */
158         0x0A54,     /* R113 - EQ16 */
159         0x0558,     /* R114 - EQ17 */
160         0x168E,     /* R115 - EQ18 */
161         0xF829,     /* R116 - EQ19 */
162         0x07AD,     /* R117 - EQ20 */
163         0x1103,     /* R118 - EQ21 */
164         0x0564,     /* R119 - EQ22 */
165         0x0559,     /* R120 - EQ23 */
166         0x4000,     /* R121 - EQ24 */
167         0x0000,     /* R122 - Digital Pulls */
168         0x0F08,     /* R123 - DRC Control 1 */
169         0x0000,     /* R124 - DRC Control 2 */
170         0x0080,     /* R125 - DRC Control 3 */
171         0x0000,     /* R126 - DRC Control 4 */
172 };
173
174 static struct {
175         int ratio;
176         int clk_sys_rate;
177 } clk_sys_rates[] = {
178         { 64,   0 },
179         { 128,  1 },
180         { 192,  2 },
181         { 256,  3 },
182         { 384,  4 },
183         { 512,  5 },
184         { 768,  6 },
185         { 1024, 7 },
186         { 1408, 8 },
187         { 1536, 9 },
188 };
189
190 static struct {
191         int rate;
192         int sample_rate;
193 } sample_rates[] = {
194         { 8000,  0  },
195         { 11025, 1  },
196         { 12000, 1  },
197         { 16000, 2  },
198         { 22050, 3  },
199         { 24000, 3  },
200         { 32000, 4  },
201         { 44100, 5  },
202         { 48000, 5  },
203 };
204
205 static struct {
206         int div; /* *10 due to .5s */
207         int bclk_div;
208 } bclk_divs[] = {
209         { 10,  0  },
210         { 15,  1  },
211         { 20,  2  },
212         { 30,  3  },
213         { 40,  4  },
214         { 55,  5  },
215         { 60,  6  },
216         { 80,  7  },
217         { 110, 8  },
218         { 120, 9  },
219         { 160, 10 },
220         { 220, 11 },
221         { 240, 12 },
222         { 320, 13 },
223         { 440, 14 },
224         { 480, 15 },
225 };
226
227 struct wm8993_priv {
228         struct wm_hubs_data hubs_data;
229         u16 reg_cache[WM8993_REGISTER_COUNT];
230         struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
231         struct wm8993_platform_data pdata;
232         enum snd_soc_control_type control_type;
233         int master;
234         int sysclk_source;
235         int tdm_slots;
236         int tdm_width;
237         unsigned int mclk_rate;
238         unsigned int sysclk_rate;
239         unsigned int fs;
240         unsigned int bclk;
241         int class_w_users;
242         unsigned int fll_fref;
243         unsigned int fll_fout;
244         int fll_src;
245 };
246
247 static int wm8993_volatile(unsigned int reg)
248 {
249         switch (reg) {
250         case WM8993_SOFTWARE_RESET:
251         case WM8993_DC_SERVO_0:
252         case WM8993_DC_SERVO_READBACK_0:
253         case WM8993_DC_SERVO_READBACK_1:
254         case WM8993_DC_SERVO_READBACK_2:
255                 return 1;
256         default:
257                 return 0;
258         }
259 }
260
261 struct _fll_div {
262         u16 fll_fratio;
263         u16 fll_outdiv;
264         u16 fll_clk_ref_div;
265         u16 n;
266         u16 k;
267 };
268
269 /* The size in bits of the FLL divide multiplied by 10
270  * to allow rounding later */
271 #define FIXED_FLL_SIZE ((1 << 16) * 10)
272
273 static struct {
274         unsigned int min;
275         unsigned int max;
276         u16 fll_fratio;
277         int ratio;
278 } fll_fratios[] = {
279         {       0,    64000, 4, 16 },
280         {   64000,   128000, 3,  8 },
281         {  128000,   256000, 2,  4 },
282         {  256000,  1000000, 1,  2 },
283         { 1000000, 13500000, 0,  1 },
284 };
285
286 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
287                        unsigned int Fout)
288 {
289         u64 Kpart;
290         unsigned int K, Ndiv, Nmod, target;
291         unsigned int div;
292         int i;
293
294         /* Fref must be <=13.5MHz */
295         div = 1;
296         fll_div->fll_clk_ref_div = 0;
297         while ((Fref / div) > 13500000) {
298                 div *= 2;
299                 fll_div->fll_clk_ref_div++;
300
301                 if (div > 8) {
302                         pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
303                                Fref);
304                         return -EINVAL;
305                 }
306         }
307
308         pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
309
310         /* Apply the division for our remaining calculations */
311         Fref /= div;
312
313         /* Fvco should be 90-100MHz; don't check the upper bound */
314         div = 0;
315         target = Fout * 2;
316         while (target < 90000000) {
317                 div++;
318                 target *= 2;
319                 if (div > 7) {
320                         pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
321                                Fout);
322                         return -EINVAL;
323                 }
324         }
325         fll_div->fll_outdiv = div;
326
327         pr_debug("Fvco=%dHz\n", target);
328
329         /* Find an appropraite FLL_FRATIO and factor it out of the target */
330         for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
331                 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
332                         fll_div->fll_fratio = fll_fratios[i].fll_fratio;
333                         target /= fll_fratios[i].ratio;
334                         break;
335                 }
336         }
337         if (i == ARRAY_SIZE(fll_fratios)) {
338                 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
339                 return -EINVAL;
340         }
341
342         /* Now, calculate N.K */
343         Ndiv = target / Fref;
344
345         fll_div->n = Ndiv;
346         Nmod = target % Fref;
347         pr_debug("Nmod=%d\n", Nmod);
348
349         /* Calculate fractional part - scale up so we can round. */
350         Kpart = FIXED_FLL_SIZE * (long long)Nmod;
351
352         do_div(Kpart, Fref);
353
354         K = Kpart & 0xFFFFFFFF;
355
356         if ((K % 10) >= 5)
357                 K += 5;
358
359         /* Move down to proper range now rounding is done */
360         fll_div->k = K / 10;
361
362         pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
363                  fll_div->n, fll_div->k,
364                  fll_div->fll_fratio, fll_div->fll_outdiv,
365                  fll_div->fll_clk_ref_div);
366
367         return 0;
368 }
369
370 static int _wm8993_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
371                           unsigned int Fref, unsigned int Fout)
372 {
373         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
374         u16 reg1, reg4, reg5;
375         struct _fll_div fll_div;
376         int ret;
377
378         /* Any change? */
379         if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
380                 return 0;
381
382         /* Disable the FLL */
383         if (Fout == 0) {
384                 dev_dbg(codec->dev, "FLL disabled\n");
385                 wm8993->fll_fref = 0;
386                 wm8993->fll_fout = 0;
387
388                 reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
389                 reg1 &= ~WM8993_FLL_ENA;
390                 snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
391
392                 return 0;
393         }
394
395         ret = fll_factors(&fll_div, Fref, Fout);
396         if (ret != 0)
397                 return ret;
398
399         reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
400         reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
401
402         switch (fll_id) {
403         case WM8993_FLL_MCLK:
404                 break;
405
406         case WM8993_FLL_LRCLK:
407                 reg5 |= 1;
408                 break;
409
410         case WM8993_FLL_BCLK:
411                 reg5 |= 2;
412                 break;
413
414         default:
415                 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
416                 return -EINVAL;
417         }
418
419         /* Any FLL configuration change requires that the FLL be
420          * disabled first. */
421         reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
422         reg1 &= ~WM8993_FLL_ENA;
423         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
424
425         /* Apply the configuration */
426         if (fll_div.k)
427                 reg1 |= WM8993_FLL_FRAC_MASK;
428         else
429                 reg1 &= ~WM8993_FLL_FRAC_MASK;
430         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
431
432         snd_soc_write(codec, WM8993_FLL_CONTROL_2,
433                       (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
434                       (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
435         snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
436
437         reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
438         reg4 &= ~WM8993_FLL_N_MASK;
439         reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
440         snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
441
442         reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
443         reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
444         snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
445
446         /* Enable the FLL */
447         snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
448
449         dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
450
451         wm8993->fll_fref = Fref;
452         wm8993->fll_fout = Fout;
453         wm8993->fll_src = source;
454
455         return 0;
456 }
457
458 static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
459                           unsigned int Fref, unsigned int Fout)
460 {
461         return _wm8993_set_fll(dai->codec, fll_id, source, Fref, Fout);
462 }
463
464 static int configure_clock(struct snd_soc_codec *codec)
465 {
466         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
467         unsigned int reg;
468
469         /* This should be done on init() for bypass paths */
470         switch (wm8993->sysclk_source) {
471         case WM8993_SYSCLK_MCLK:
472                 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
473
474                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
475                 reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
476                 if (wm8993->mclk_rate > 13500000) {
477                         reg |= WM8993_MCLK_DIV;
478                         wm8993->sysclk_rate = wm8993->mclk_rate / 2;
479                 } else {
480                         reg &= ~WM8993_MCLK_DIV;
481                         wm8993->sysclk_rate = wm8993->mclk_rate;
482                 }
483                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
484                 break;
485
486         case WM8993_SYSCLK_FLL:
487                 dev_dbg(codec->dev, "Using %dHz FLL clock\n",
488                         wm8993->fll_fout);
489
490                 reg = snd_soc_read(codec, WM8993_CLOCKING_2);
491                 reg |= WM8993_SYSCLK_SRC;
492                 if (wm8993->fll_fout > 13500000) {
493                         reg |= WM8993_MCLK_DIV;
494                         wm8993->sysclk_rate = wm8993->fll_fout / 2;
495                 } else {
496                         reg &= ~WM8993_MCLK_DIV;
497                         wm8993->sysclk_rate = wm8993->fll_fout;
498                 }
499                 snd_soc_write(codec, WM8993_CLOCKING_2, reg);
500                 break;
501
502         default:
503                 dev_err(codec->dev, "System clock not configured\n");
504                 return -EINVAL;
505         }
506
507         dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
508
509         return 0;
510 }
511
512 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
513 static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
514 static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
515 static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
516 static const unsigned int drc_max_tlv[] = {
517         TLV_DB_RANGE_HEAD(4),
518         0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
519         3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
520 };
521 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
522 static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
523 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
524 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
525 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
526
527 static const char *dac_deemph_text[] = {
528         "None",
529         "32kHz",
530         "44.1kHz",
531         "48kHz",
532 };
533
534 static const struct soc_enum dac_deemph =
535         SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
536
537 static const char *adc_hpf_text[] = {
538         "Hi-Fi",
539         "Voice 1",
540         "Voice 2",
541         "Voice 3",
542 };
543
544 static const struct soc_enum adc_hpf =
545         SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
546
547 static const char *drc_path_text[] = {
548         "ADC",
549         "DAC"
550 };
551
552 static const struct soc_enum drc_path =
553         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
554
555 static const char *drc_r0_text[] = {
556         "1",
557         "1/2",
558         "1/4",
559         "1/8",
560         "1/16",
561         "0",
562 };
563
564 static const struct soc_enum drc_r0 =
565         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
566
567 static const char *drc_r1_text[] = {
568         "1",
569         "1/2",
570         "1/4",
571         "1/8",
572         "0",
573 };
574
575 static const struct soc_enum drc_r1 =
576         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
577
578 static const char *drc_attack_text[] = {
579         "Reserved",
580         "181us",
581         "363us",
582         "726us",
583         "1.45ms",
584         "2.9ms",
585         "5.8ms",
586         "11.6ms",
587         "23.2ms",
588         "46.4ms",
589         "92.8ms",
590         "185.6ms",
591 };
592
593 static const struct soc_enum drc_attack =
594         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
595
596 static const char *drc_decay_text[] = {
597         "186ms",
598         "372ms",
599         "743ms",
600         "1.49s",
601         "2.97ms",
602         "5.94ms",
603         "11.89ms",
604         "23.78ms",
605         "47.56ms",
606 };
607
608 static const struct soc_enum drc_decay =
609         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
610
611 static const char *drc_ff_text[] = {
612         "5 samples",
613         "9 samples",
614 };
615
616 static const struct soc_enum drc_ff =
617         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
618
619 static const char *drc_qr_rate_text[] = {
620         "0.725ms",
621         "1.45ms",
622         "5.8ms",
623 };
624
625 static const struct soc_enum drc_qr_rate =
626         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
627
628 static const char *drc_smooth_text[] = {
629         "Low",
630         "Medium",
631         "High",
632 };
633
634 static const struct soc_enum drc_smooth =
635         SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
636
637 static const struct snd_kcontrol_new wm8993_snd_controls[] = {
638 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
639                5, 9, 12, 0, sidetone_tlv),
640
641 SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
642 SOC_ENUM("DRC Path", drc_path),
643 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
644                2, 60, 1, drc_comp_threash),
645 SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
646                11, 30, 1, drc_comp_amp),
647 SOC_ENUM("DRC R0", drc_r0),
648 SOC_ENUM("DRC R1", drc_r1),
649 SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
650                drc_min_tlv),
651 SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
652                drc_max_tlv),
653 SOC_ENUM("DRC Attack Rate", drc_attack),
654 SOC_ENUM("DRC Decay Rate", drc_decay),
655 SOC_ENUM("DRC FF Delay", drc_ff),
656 SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
657 SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
658 SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
659                drc_qr_tlv),
660 SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
661 SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
662 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
663 SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
664 SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
665                drc_startup_tlv),
666
667 SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
668
669 SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
670                  WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
671 SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
672 SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
673
674 SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
675                  WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
676 SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
677                dac_boost_tlv),
678 SOC_ENUM("DAC Deemphasis", dac_deemph),
679
680 SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
681                2, 1, 1, wm_hubs_spkmix_tlv),
682
683 SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
684                2, 1, 1, wm_hubs_spkmix_tlv),
685 };
686
687 static const struct snd_kcontrol_new wm8993_eq_controls[] = {
688 SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
689 SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
690 SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
691 SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
692 SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
693 };
694
695 static int clk_sys_event(struct snd_soc_dapm_widget *w,
696                          struct snd_kcontrol *kcontrol, int event)
697 {
698         struct snd_soc_codec *codec = w->codec;
699
700         switch (event) {
701         case SND_SOC_DAPM_PRE_PMU:
702                 return configure_clock(codec);
703
704         case SND_SOC_DAPM_POST_PMD:
705                 break;
706         }
707
708         return 0;
709 }
710
711 /*
712  * When used with DAC outputs only the WM8993 charge pump supports
713  * operation in class W mode, providing very low power consumption
714  * when used with digital sources.  Enable and disable this mode
715  * automatically depending on the mixer configuration.
716  *
717  * Currently the only supported paths are the direct DAC->headphone
718  * paths (which provide minimum power consumption anyway).
719  */
720 static int class_w_put(struct snd_kcontrol *kcontrol,
721                        struct snd_ctl_elem_value *ucontrol)
722 {
723         struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
724         struct snd_soc_codec *codec = widget->codec;
725         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
726         int ret;
727
728         /* Turn it off if we're using the main output mixer */
729         if (ucontrol->value.integer.value[0] == 0) {
730                 if (wm8993->class_w_users == 0) {
731                         dev_dbg(codec->dev, "Disabling Class W\n");
732                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
733                                             WM8993_CP_DYN_FREQ |
734                                             WM8993_CP_DYN_V,
735                                             0);
736                 }
737                 wm8993->class_w_users++;
738         }
739
740         /* Implement the change */
741         ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
742
743         /* Enable it if we're using the direct DAC path */
744         if (ucontrol->value.integer.value[0] == 1) {
745                 if (wm8993->class_w_users == 1) {
746                         dev_dbg(codec->dev, "Enabling Class W\n");
747                         snd_soc_update_bits(codec, WM8993_CLASS_W_0,
748                                             WM8993_CP_DYN_FREQ |
749                                             WM8993_CP_DYN_V,
750                                             WM8993_CP_DYN_FREQ |
751                                             WM8993_CP_DYN_V);
752                 }
753                 wm8993->class_w_users--;
754         }
755
756         dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
757                 wm8993->class_w_users);
758
759         return ret;
760 }
761
762 #define SOC_DAPM_ENUM_W(xname, xenum) \
763 {       .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
764         .info = snd_soc_info_enum_double, \
765         .get = snd_soc_dapm_get_enum_double, \
766         .put = class_w_put, \
767         .private_value = (unsigned long)&xenum }
768
769 static const char *hp_mux_text[] = {
770         "Mixer",
771         "DAC",
772 };
773
774 static const struct soc_enum hpl_enum =
775         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
776
777 static const struct snd_kcontrol_new hpl_mux =
778         SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
779
780 static const struct soc_enum hpr_enum =
781         SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
782
783 static const struct snd_kcontrol_new hpr_mux =
784         SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
785
786 static const struct snd_kcontrol_new left_speaker_mixer[] = {
787 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
788 SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
789 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
790 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
791 };
792
793 static const struct snd_kcontrol_new right_speaker_mixer[] = {
794 SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
795 SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
796 SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
797 SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
798 };
799
800 static const char *aif_text[] = {
801         "Left", "Right"
802 };
803
804 static const struct soc_enum aifoutl_enum =
805         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 15, 2, aif_text);
806
807 static const struct snd_kcontrol_new aifoutl_mux =
808         SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
809
810 static const struct soc_enum aifoutr_enum =
811         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_1, 14, 2, aif_text);
812
813 static const struct snd_kcontrol_new aifoutr_mux =
814         SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
815
816 static const struct soc_enum aifinl_enum =
817         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 15, 2, aif_text);
818
819 static const struct snd_kcontrol_new aifinl_mux =
820         SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
821
822 static const struct soc_enum aifinr_enum =
823         SOC_ENUM_SINGLE(WM8993_AUDIO_INTERFACE_2, 14, 2, aif_text);
824
825 static const struct snd_kcontrol_new aifinr_mux =
826         SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
827
828 static const char *sidetone_text[] = {
829         "None", "Left", "Right"
830 };
831
832 static const struct soc_enum sidetonel_enum =
833         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 2, 3, sidetone_text);
834
835 static const struct snd_kcontrol_new sidetonel_mux =
836         SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
837
838 static const struct soc_enum sidetoner_enum =
839         SOC_ENUM_SINGLE(WM8993_DIGITAL_SIDE_TONE, 0, 3, sidetone_text);
840
841 static const struct snd_kcontrol_new sidetoner_mux =
842         SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
843
844 static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
845 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
846                     SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
847 SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
848 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
849
850 SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
851 SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
852
853 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
854 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
855
856 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
857 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
858
859 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
860 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
861
862 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
863 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
864
865 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
866 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
867
868 SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
869 SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
870
871 SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
872 SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
873
874 SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
875                    left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
876 SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
877                    right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
878
879 };
880
881 static const struct snd_soc_dapm_route routes[] = {
882         { "ADCL", NULL, "CLK_SYS" },
883         { "ADCL", NULL, "CLK_DSP" },
884         { "ADCR", NULL, "CLK_SYS" },
885         { "ADCR", NULL, "CLK_DSP" },
886
887         { "AIFOUTL Mux", "Left", "ADCL" },
888         { "AIFOUTL Mux", "Right", "ADCR" },
889         { "AIFOUTR Mux", "Left", "ADCL" },
890         { "AIFOUTR Mux", "Right", "ADCR" },
891
892         { "AIFOUTL", NULL, "AIFOUTL Mux" },
893         { "AIFOUTR", NULL, "AIFOUTR Mux" },
894
895         { "DACL Mux", "Left", "AIFINL" },
896         { "DACL Mux", "Right", "AIFINR" },
897         { "DACR Mux", "Left", "AIFINL" },
898         { "DACR Mux", "Right", "AIFINR" },
899
900         { "DACL Sidetone", "Left", "ADCL" },
901         { "DACL Sidetone", "Right", "ADCR" },
902         { "DACR Sidetone", "Left", "ADCL" },
903         { "DACR Sidetone", "Right", "ADCR" },
904
905         { "DACL", NULL, "CLK_SYS" },
906         { "DACL", NULL, "CLK_DSP" },
907         { "DACL", NULL, "DACL Mux" },
908         { "DACL", NULL, "DACL Sidetone" },
909         { "DACR", NULL, "CLK_SYS" },
910         { "DACR", NULL, "CLK_DSP" },
911         { "DACR", NULL, "DACR Mux" },
912         { "DACR", NULL, "DACR Sidetone" },
913
914         { "Left Output Mixer", "DAC Switch", "DACL" },
915
916         { "Right Output Mixer", "DAC Switch", "DACR" },
917
918         { "Left Output PGA", NULL, "CLK_SYS" },
919
920         { "Right Output PGA", NULL, "CLK_SYS" },
921
922         { "SPKL", "DAC Switch", "DACL" },
923         { "SPKL", NULL, "CLK_SYS" },
924
925         { "SPKR", "DAC Switch", "DACR" },
926         { "SPKR", NULL, "CLK_SYS" },
927
928         { "Left Headphone Mux", "DAC", "DACL" },
929         { "Right Headphone Mux", "DAC", "DACR" },
930 };
931
932 static void wm8993_cache_restore(struct snd_soc_codec *codec)
933 {
934         u16 *cache = codec->reg_cache;
935         int i;
936
937         if (!codec->cache_sync)
938                 return;
939
940         /* Reenable hardware writes */
941         codec->cache_only = 0;
942
943         /* Restore the register settings */
944         for (i = 1; i < WM8993_MAX_REGISTER; i++) {
945                 if (cache[i] == wm8993_reg_defaults[i])
946                         continue;
947                 snd_soc_write(codec, i, cache[i]);
948         }
949
950         /* We're in sync again */
951         codec->cache_sync = 0;
952 }
953
954 static int wm8993_set_bias_level(struct snd_soc_codec *codec,
955                                  enum snd_soc_bias_level level)
956 {
957         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
958         int ret;
959
960         switch (level) {
961         case SND_SOC_BIAS_ON:
962         case SND_SOC_BIAS_PREPARE:
963                 /* VMID=2*40k */
964                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
965                                     WM8993_VMID_SEL_MASK, 0x2);
966                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
967                                     WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
968                 break;
969
970         case SND_SOC_BIAS_STANDBY:
971                 if (codec->bias_level == SND_SOC_BIAS_OFF) {
972                         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
973                                                     wm8993->supplies);
974                         if (ret != 0)
975                                 return ret;
976
977                         wm8993_cache_restore(codec);
978
979                         /* Tune DC servo configuration */
980                         snd_soc_write(codec, 0x44, 3);
981                         snd_soc_write(codec, 0x56, 3);
982                         snd_soc_write(codec, 0x44, 0);
983
984                         /* Bring up VMID with fast soft start */
985                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
986                                             WM8993_STARTUP_BIAS_ENA |
987                                             WM8993_VMID_BUF_ENA |
988                                             WM8993_VMID_RAMP_MASK |
989                                             WM8993_BIAS_SRC,
990                                             WM8993_STARTUP_BIAS_ENA |
991                                             WM8993_VMID_BUF_ENA |
992                                             WM8993_VMID_RAMP_MASK |
993                                             WM8993_BIAS_SRC);
994
995                         /* If either line output is single ended we
996                          * need the VMID buffer */
997                         if (!wm8993->pdata.lineout1_diff ||
998                             !wm8993->pdata.lineout2_diff)
999                                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1000                                                  WM8993_LINEOUT_VMID_BUF_ENA,
1001                                                  WM8993_LINEOUT_VMID_BUF_ENA);
1002
1003                         /* VMID=2*40k */
1004                         snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1005                                             WM8993_VMID_SEL_MASK |
1006                                             WM8993_BIAS_ENA,
1007                                             WM8993_BIAS_ENA | 0x2);
1008                         msleep(32);
1009
1010                         /* Switch to normal bias */
1011                         snd_soc_update_bits(codec, WM8993_ANTIPOP2,
1012                                             WM8993_BIAS_SRC |
1013                                             WM8993_STARTUP_BIAS_ENA, 0);
1014                 }
1015
1016                 /* VMID=2*240k */
1017                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1018                                     WM8993_VMID_SEL_MASK, 0x4);
1019
1020                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
1021                                     WM8993_TSHUT_ENA, 0);
1022                 break;
1023
1024         case SND_SOC_BIAS_OFF:
1025                 snd_soc_update_bits(codec, WM8993_ANTIPOP1,
1026                                     WM8993_LINEOUT_VMID_BUF_ENA, 0);
1027
1028                 snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
1029                                     WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1030                                     0);
1031
1032 #ifdef CONFIG_REGULATOR
1033                /* Post 2.6.34 we will be able to get a callback when
1034                 * the regulators are disabled which we can use but
1035                 * for now just assume that the power will be cut if
1036                 * the regulator API is in use.
1037                 */
1038                 codec->cache_sync = 1;
1039 #endif
1040
1041                 regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1042                                        wm8993->supplies);
1043                 break;
1044         }
1045
1046         codec->bias_level = level;
1047
1048         return 0;
1049 }
1050
1051 static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1052                              int clk_id, unsigned int freq, int dir)
1053 {
1054         struct snd_soc_codec *codec = codec_dai->codec;
1055         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1056
1057         switch (clk_id) {
1058         case WM8993_SYSCLK_MCLK:
1059                 wm8993->mclk_rate = freq;
1060         case WM8993_SYSCLK_FLL:
1061                 wm8993->sysclk_source = clk_id;
1062                 break;
1063
1064         default:
1065                 return -EINVAL;
1066         }
1067
1068         return 0;
1069 }
1070
1071 static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1072                               unsigned int fmt)
1073 {
1074         struct snd_soc_codec *codec = dai->codec;
1075         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1076         unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1077         unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1078
1079         aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1080                   WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1081         aif4 &= ~WM8993_LRCLK_DIR;
1082
1083         switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1084         case SND_SOC_DAIFMT_CBS_CFS:
1085                 wm8993->master = 0;
1086                 break;
1087         case SND_SOC_DAIFMT_CBS_CFM:
1088                 aif4 |= WM8993_LRCLK_DIR;
1089                 wm8993->master = 1;
1090                 break;
1091         case SND_SOC_DAIFMT_CBM_CFS:
1092                 aif1 |= WM8993_BCLK_DIR;
1093                 wm8993->master = 1;
1094                 break;
1095         case SND_SOC_DAIFMT_CBM_CFM:
1096                 aif1 |= WM8993_BCLK_DIR;
1097                 aif4 |= WM8993_LRCLK_DIR;
1098                 wm8993->master = 1;
1099                 break;
1100         default:
1101                 return -EINVAL;
1102         }
1103
1104         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1105         case SND_SOC_DAIFMT_DSP_B:
1106                 aif1 |= WM8993_AIF_LRCLK_INV;
1107         case SND_SOC_DAIFMT_DSP_A:
1108                 aif1 |= 0x18;
1109                 break;
1110         case SND_SOC_DAIFMT_I2S:
1111                 aif1 |= 0x10;
1112                 break;
1113         case SND_SOC_DAIFMT_RIGHT_J:
1114                 break;
1115         case SND_SOC_DAIFMT_LEFT_J:
1116                 aif1 |= 0x8;
1117                 break;
1118         default:
1119                 return -EINVAL;
1120         }
1121
1122         switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1123         case SND_SOC_DAIFMT_DSP_A:
1124         case SND_SOC_DAIFMT_DSP_B:
1125                 /* frame inversion not valid for DSP modes */
1126                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1127                 case SND_SOC_DAIFMT_NB_NF:
1128                         break;
1129                 case SND_SOC_DAIFMT_IB_NF:
1130                         aif1 |= WM8993_AIF_BCLK_INV;
1131                         break;
1132                 default:
1133                         return -EINVAL;
1134                 }
1135                 break;
1136
1137         case SND_SOC_DAIFMT_I2S:
1138         case SND_SOC_DAIFMT_RIGHT_J:
1139         case SND_SOC_DAIFMT_LEFT_J:
1140                 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1141                 case SND_SOC_DAIFMT_NB_NF:
1142                         break;
1143                 case SND_SOC_DAIFMT_IB_IF:
1144                         aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1145                         break;
1146                 case SND_SOC_DAIFMT_IB_NF:
1147                         aif1 |= WM8993_AIF_BCLK_INV;
1148                         break;
1149                 case SND_SOC_DAIFMT_NB_IF:
1150                         aif1 |= WM8993_AIF_LRCLK_INV;
1151                         break;
1152                 default:
1153                         return -EINVAL;
1154                 }
1155                 break;
1156         default:
1157                 return -EINVAL;
1158         }
1159
1160         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1161         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1162
1163         return 0;
1164 }
1165
1166 static int wm8993_hw_params(struct snd_pcm_substream *substream,
1167                             struct snd_pcm_hw_params *params,
1168                             struct snd_soc_dai *dai)
1169 {
1170         struct snd_soc_codec *codec = dai->codec;
1171         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1172         int ret, i, best, best_val, cur_val;
1173         unsigned int clocking1, clocking3, aif1, aif4;
1174
1175         clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
1176         clocking1 &= ~WM8993_BCLK_DIV_MASK;
1177
1178         clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
1179         clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1180
1181         aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
1182         aif1 &= ~WM8993_AIF_WL_MASK;
1183
1184         aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
1185         aif4 &= ~WM8993_LRCLK_RATE_MASK;
1186
1187         /* What BCLK do we need? */
1188         wm8993->fs = params_rate(params);
1189         wm8993->bclk = 2 * wm8993->fs;
1190         if (wm8993->tdm_slots) {
1191                 dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1192                         wm8993->tdm_slots, wm8993->tdm_width);
1193                 wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1194         } else {
1195                 switch (params_format(params)) {
1196                 case SNDRV_PCM_FORMAT_S16_LE:
1197                         wm8993->bclk *= 16;
1198                         break;
1199                 case SNDRV_PCM_FORMAT_S20_3LE:
1200                         wm8993->bclk *= 20;
1201                         aif1 |= 0x8;
1202                         break;
1203                 case SNDRV_PCM_FORMAT_S24_LE:
1204                         wm8993->bclk *= 24;
1205                         aif1 |= 0x10;
1206                         break;
1207                 case SNDRV_PCM_FORMAT_S32_LE:
1208                         wm8993->bclk *= 32;
1209                         aif1 |= 0x18;
1210                         break;
1211                 default:
1212                         return -EINVAL;
1213                 }
1214         }
1215
1216         dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1217
1218         ret = configure_clock(codec);
1219         if (ret != 0)
1220                 return ret;
1221
1222         /* Select nearest CLK_SYS_RATE */
1223         best = 0;
1224         best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1225                        - wm8993->fs);
1226         for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1227                 cur_val = abs((wm8993->sysclk_rate /
1228                                clk_sys_rates[i].ratio) - wm8993->fs);;
1229                 if (cur_val < best_val) {
1230                         best = i;
1231                         best_val = cur_val;
1232                 }
1233         }
1234         dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1235                 clk_sys_rates[best].ratio);
1236         clocking3 |= (clk_sys_rates[best].clk_sys_rate
1237                       << WM8993_CLK_SYS_RATE_SHIFT);
1238
1239         /* SAMPLE_RATE */
1240         best = 0;
1241         best_val = abs(wm8993->fs - sample_rates[0].rate);
1242         for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1243                 /* Closest match */
1244                 cur_val = abs(wm8993->fs - sample_rates[i].rate);
1245                 if (cur_val < best_val) {
1246                         best = i;
1247                         best_val = cur_val;
1248                 }
1249         }
1250         dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1251                 sample_rates[best].rate);
1252         clocking3 |= (sample_rates[best].sample_rate
1253                       << WM8993_SAMPLE_RATE_SHIFT);
1254
1255         /* BCLK_DIV */
1256         best = 0;
1257         best_val = INT_MAX;
1258         for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1259                 cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1260                         - wm8993->bclk;
1261                 if (cur_val < 0) /* Table is sorted */
1262                         break;
1263                 if (cur_val < best_val) {
1264                         best = i;
1265                         best_val = cur_val;
1266                 }
1267         }
1268         wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1269         dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1270                 bclk_divs[best].div, wm8993->bclk);
1271         clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1272
1273         /* LRCLK is a simple fraction of BCLK */
1274         dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1275         aif4 |= wm8993->bclk / wm8993->fs;
1276
1277         snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
1278         snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
1279         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
1280         snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
1281
1282         /* ReTune Mobile? */
1283         if (wm8993->pdata.num_retune_configs) {
1284                 u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
1285                 struct wm8993_retune_mobile_setting *s;
1286
1287                 best = 0;
1288                 best_val = abs(wm8993->pdata.retune_configs[0].rate
1289                                - wm8993->fs);
1290                 for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1291                         cur_val = abs(wm8993->pdata.retune_configs[i].rate
1292                                       - wm8993->fs);
1293                         if (cur_val < best_val) {
1294                                 best_val = cur_val;
1295                                 best = i;
1296                         }
1297                 }
1298                 s = &wm8993->pdata.retune_configs[best];
1299
1300                 dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
1301                         s->name, s->rate);
1302
1303                 /* Disable EQ while we reconfigure */
1304                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
1305
1306                 for (i = 1; i < ARRAY_SIZE(s->config); i++)
1307                         snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
1308
1309                 snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1310         }
1311
1312         return 0;
1313 }
1314
1315 static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1316 {
1317         struct snd_soc_codec *codec = codec_dai->codec;
1318         unsigned int reg;
1319
1320         reg = snd_soc_read(codec, WM8993_DAC_CTRL);
1321
1322         if (mute)
1323                 reg |= WM8993_DAC_MUTE;
1324         else
1325                 reg &= ~WM8993_DAC_MUTE;
1326
1327         snd_soc_write(codec, WM8993_DAC_CTRL, reg);
1328
1329         return 0;
1330 }
1331
1332 static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1333                                unsigned int rx_mask, int slots, int slot_width)
1334 {
1335         struct snd_soc_codec *codec = dai->codec;
1336         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1337         int aif1 = 0;
1338         int aif2 = 0;
1339
1340         /* Don't need to validate anything if we're turning off TDM */
1341         if (slots == 0) {
1342                 wm8993->tdm_slots = 0;
1343                 goto out;
1344         }
1345
1346         /* Note that we allow configurations we can't handle ourselves - 
1347          * for example, we can generate clocks for slots 2 and up even if
1348          * we can't use those slots ourselves.
1349          */
1350         aif1 |= WM8993_AIFADC_TDM;
1351         aif2 |= WM8993_AIFDAC_TDM;
1352
1353         switch (rx_mask) {
1354         case 3:
1355                 break;
1356         case 0xc:
1357                 aif1 |= WM8993_AIFADC_TDM_CHAN;
1358                 break;
1359         default:
1360                 return -EINVAL;
1361         }
1362
1363
1364         switch (tx_mask) {
1365         case 3:
1366                 break;
1367         case 0xc:
1368                 aif2 |= WM8993_AIFDAC_TDM_CHAN;
1369                 break;
1370         default:
1371                 return -EINVAL;
1372         }
1373
1374 out:
1375         wm8993->tdm_width = slot_width;
1376         wm8993->tdm_slots = slots / 2;
1377
1378         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_1,
1379                             WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1380         snd_soc_update_bits(codec, WM8993_AUDIO_INTERFACE_2,
1381                             WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1382
1383         return 0;
1384 }
1385
1386 static struct snd_soc_dai_ops wm8993_ops = {
1387         .set_sysclk = wm8993_set_sysclk,
1388         .set_fmt = wm8993_set_dai_fmt,
1389         .hw_params = wm8993_hw_params,
1390         .digital_mute = wm8993_digital_mute,
1391         .set_pll = wm8993_set_fll,
1392         .set_tdm_slot = wm8993_set_tdm_slot,
1393 };
1394
1395 #define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1396
1397 #define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1398                         SNDRV_PCM_FMTBIT_S20_3LE |\
1399                         SNDRV_PCM_FMTBIT_S24_LE |\
1400                         SNDRV_PCM_FMTBIT_S32_LE)
1401
1402 static struct snd_soc_dai_driver wm8993_dai = {
1403         .name = "wm8993-hifi",
1404         .playback = {
1405                 .stream_name = "Playback",
1406                 .channels_min = 1,
1407                 .channels_max = 2,
1408                 .rates = WM8993_RATES,
1409                 .formats = WM8993_FORMATS,
1410         },
1411         .capture = {
1412                  .stream_name = "Capture",
1413                  .channels_min = 1,
1414                  .channels_max = 2,
1415                  .rates = WM8993_RATES,
1416                  .formats = WM8993_FORMATS,
1417          },
1418         .ops = &wm8993_ops,
1419         .symmetric_rates = 1,
1420 };
1421
1422 static int wm8993_probe(struct snd_soc_codec *codec)
1423 {
1424         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1425         int ret, i, val;
1426
1427         wm8993->hubs_data.hp_startup_mode = 1;
1428         wm8993->hubs_data.dcs_codes = -2;
1429
1430         ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
1431         if (ret != 0) {
1432                 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1433                 return ret;
1434         }
1435
1436         for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1437                 wm8993->supplies[i].supply = wm8993_supply_names[i];
1438
1439         ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8993->supplies),
1440                                  wm8993->supplies);
1441         if (ret != 0) {
1442                 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1443                 return ret;
1444         }
1445
1446         ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1447                                     wm8993->supplies);
1448         if (ret != 0) {
1449                 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
1450                 goto err_get;
1451         }
1452
1453         val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
1454         if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
1455                 dev_err(codec->dev, "Invalid ID register value %x\n", val);
1456                 ret = -EINVAL;
1457                 goto err_enable;
1458         }
1459
1460         ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
1461         if (ret != 0)
1462                 goto err_enable;
1463
1464         codec->cache_only = 1;
1465
1466         /* By default we're using the output mixers */
1467         wm8993->class_w_users = 2;
1468
1469         /* Latch volume update bits and default ZC on */
1470         snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1471                             WM8993_DAC_VU, WM8993_DAC_VU);
1472         snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1473                             WM8993_ADC_VU, WM8993_ADC_VU);
1474
1475         /* Manualy manage the HPOUT sequencing for independent stereo
1476          * control. */
1477         snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
1478                             WM8993_HPOUT1_AUTO_PU, 0);
1479
1480         /* Use automatic clock configuration */
1481         snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1482
1483         wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
1484                                       wm8993->pdata.lineout2_diff,
1485                                       wm8993->pdata.lineout1fb,
1486                                       wm8993->pdata.lineout2fb,
1487                                       wm8993->pdata.jd_scthr,
1488                                       wm8993->pdata.jd_thr,
1489                                       wm8993->pdata.micbias1_lvl,
1490                                       wm8993->pdata.micbias2_lvl);
1491
1492         ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1493         if (ret != 0)
1494                 goto err_enable;
1495
1496         snd_soc_add_controls(codec, wm8993_snd_controls,
1497                              ARRAY_SIZE(wm8993_snd_controls));
1498         if (wm8993->pdata.num_retune_configs != 0) {
1499                 dev_dbg(codec->dev, "Using ReTune Mobile\n");
1500         } else {
1501                 dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
1502                 snd_soc_add_controls(codec, wm8993_eq_controls,
1503                                      ARRAY_SIZE(wm8993_eq_controls));
1504         }
1505
1506         snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
1507                                   ARRAY_SIZE(wm8993_dapm_widgets));
1508         wm_hubs_add_analogue_controls(codec);
1509
1510         snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
1511         wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
1512                                     wm8993->pdata.lineout2_diff);
1513
1514         return 0;
1515
1516 err_enable:
1517         regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1518 err_get:
1519         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1520         return ret;
1521 }
1522
1523 static int wm8993_remove(struct snd_soc_codec *codec)
1524 {
1525         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1526
1527         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1528         regulator_bulk_free(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1529         return 0;
1530 }
1531
1532 #ifdef CONFIG_PM
1533 static int wm8993_suspend(struct snd_soc_codec *codec, pm_message_t state)
1534 {
1535         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1536         int fll_fout = wm8993->fll_fout;
1537         int fll_fref  = wm8993->fll_fref;
1538         int ret;
1539
1540         /* Stop the FLL in an orderly fashion */
1541         ret = _wm8993_set_fll(codec, 0, 0, 0, 0);
1542         if (ret != 0) {
1543                 dev_err(codec->dev, "Failed to stop FLL\n");
1544                 return ret;
1545         }
1546
1547         wm8993->fll_fout = fll_fout;
1548         wm8993->fll_fref = fll_fref;
1549
1550         wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
1551
1552         return 0;
1553 }
1554
1555 static int wm8993_resume(struct snd_soc_codec *codec)
1556 {
1557         struct wm8993_priv *wm8993 = snd_soc_codec_get_drvdata(codec);
1558         int ret;
1559
1560         wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1561
1562         /* Restart the FLL? */
1563         if (wm8993->fll_fout) {
1564                 int fll_fout = wm8993->fll_fout;
1565                 int fll_fref  = wm8993->fll_fref;
1566
1567                 wm8993->fll_fref = 0;
1568                 wm8993->fll_fout = 0;
1569
1570                 ret = _wm8993_set_fll(codec, 0, wm8993->fll_src,
1571                                      fll_fref, fll_fout);
1572                 if (ret != 0)
1573                         dev_err(codec->dev, "Failed to restart FLL\n");
1574         }
1575
1576         return 0;
1577 }
1578 #else
1579 #define wm8993_suspend NULL
1580 #define wm8993_resume NULL
1581 #endif
1582
1583 static struct snd_soc_codec_driver soc_codec_dev_wm8993 = {
1584         .probe =        wm8993_probe,
1585         .remove =       wm8993_remove,
1586         .suspend =      wm8993_suspend,
1587         .resume =       wm8993_resume,
1588         .set_bias_level = wm8993_set_bias_level,
1589         .reg_cache_size = ARRAY_SIZE(wm8993_reg_defaults),
1590         .reg_word_size = sizeof(u16),
1591         .reg_cache_default = wm8993_reg_defaults,
1592         .volatile_register = wm8993_volatile,
1593 };
1594
1595 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1596 static __devinit int wm8993_i2c_probe(struct i2c_client *i2c,
1597                                       const struct i2c_device_id *id)
1598 {
1599         struct wm8993_priv *wm8993;
1600         int ret;
1601
1602         wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
1603         if (wm8993 == NULL)
1604                 return -ENOMEM;
1605
1606         i2c_set_clientdata(i2c, wm8993);
1607
1608         ret = snd_soc_register_codec(&i2c->dev,
1609                         &soc_codec_dev_wm8993, &wm8993_dai, 1);
1610         if (ret < 0)
1611                 kfree(wm8993);
1612         return ret;
1613 }
1614
1615 static __devexit int wm8993_i2c_remove(struct i2c_client *client)
1616 {
1617         snd_soc_unregister_codec(&client->dev);
1618         kfree(i2c_get_clientdata(client));
1619         return 0;
1620 }
1621
1622 static const struct i2c_device_id wm8993_i2c_id[] = {
1623         { "wm8993", 0 },
1624         { }
1625 };
1626 MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1627
1628 static struct i2c_driver wm8993_i2c_driver = {
1629         .driver = {
1630                 .name = "wm8993-codec",
1631                 .owner = THIS_MODULE,
1632         },
1633         .probe =    wm8993_i2c_probe,
1634         .remove =   __devexit_p(wm8993_i2c_remove),
1635         .id_table = wm8993_i2c_id,
1636 };
1637 #endif
1638
1639 static int __init wm8993_modinit(void)
1640 {
1641         int ret = 0;
1642 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1643         ret = i2c_add_driver(&wm8993_i2c_driver);
1644         if (ret != 0) {
1645                 pr_err("WM8993: Unable to register I2C driver: %d\n",
1646                        ret);
1647         }
1648 #endif
1649         return ret;
1650 }
1651 module_init(wm8993_modinit);
1652
1653 static void __exit wm8993_exit(void)
1654 {
1655 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1656         i2c_del_driver(&wm8993_i2c_driver);
1657 #endif
1658 }
1659 module_exit(wm8993_exit);
1660
1661
1662 MODULE_DESCRIPTION("ASoC WM8993 driver");
1663 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1664 MODULE_LICENSE("GPL");