soc: codecs: rt5639: Implement i2c shutdown
[linux-2.6.git] / sound / oss / ad1848.c
1 /*
2  * sound/oss/ad1848.c
3  *
4  * The low level driver for the AD1848/CS4248 codec chip which
5  * is used for example in the MS Sound System.
6  *
7  * The CS4231 which is used in the GUS MAX and some other cards is
8  * upwards compatible with AD1848 and this driver is able to drive it.
9  *
10  * CS4231A and AD1845 are upward compatible with CS4231. However
11  * the new features of these chips are different.
12  *
13  * CS4232 is a PnP audio chip which contains a CS4231A (and SB, MPU).
14  * CS4232A is an improved version of CS4232.
15  *
16  *
17  *
18  * Copyright (C) by Hannu Savolainen 1993-1997
19  *
20  * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
21  * Version 2 (June 1991). See the "COPYING" file distributed with this software
22  * for more info.
23  *
24  *
25  * Thomas Sailer        : ioctl code reworked (vmalloc/vfree removed)
26  *                        general sleep/wakeup clean up.
27  * Alan Cox             : reformatted. Fixed SMP bugs. Moved to kernel alloc/free
28  *                        of irqs. Use dev_id.
29  * Christoph Hellwig    : adapted to module_init/module_exit
30  * Aki Laukkanen        : added power management support
31  * Arnaldo C. de Melo   : added missing restore_flags in ad1848_resume
32  * Miguel Freitas       : added ISA PnP support
33  * Alan Cox             : Added CS4236->4239 identification
34  * Daniel T. Cobra      : Alernate config/mixer for later chips
35  * Alan Cox             : Merged chip idents and config code
36  *
37  * TODO
38  *              APM save restore assist code on IBM thinkpad
39  *
40  * Status:
41  *              Tested. Believed fully functional.
42  */
43
44 #include <linux/init.h>
45 #include <linux/interrupt.h>
46 #include <linux/module.h>
47 #include <linux/stddef.h>
48 #include <linux/slab.h>
49 #include <linux/isapnp.h>
50 #include <linux/pnp.h>
51 #include <linux/spinlock.h>
52
53 #define DEB(x)
54 #define DEB1(x)
55 #include "sound_config.h"
56
57 #include "ad1848.h"
58 #include "ad1848_mixer.h"
59
60 typedef struct
61 {
62         spinlock_t      lock;
63         int             base;
64         int             irq;
65         int             dma1, dma2;
66         int             dual_dma;       /* 1, when two DMA channels allocated */
67         int             subtype;
68         unsigned char   MCE_bit;
69         unsigned char   saved_regs[64]; /* Includes extended register space */
70         int             debug_flag;
71
72         int             audio_flags;
73         int             record_dev, playback_dev;
74
75         int             xfer_count;
76         int             audio_mode;
77         int             open_mode;
78         int             intr_active;
79         char           *chip_name, *name;
80         int             model;
81 #define MD_1848         1
82 #define MD_4231         2
83 #define MD_4231A        3
84 #define MD_1845         4
85 #define MD_4232         5
86 #define MD_C930         6
87 #define MD_IWAVE        7
88 #define MD_4235         8 /* Crystal Audio CS4235  */
89 #define MD_1845_SSCAPE  9 /* Ensoniq Soundscape PNP*/
90 #define MD_4236         10 /* 4236 and higher */
91 #define MD_42xB         11 /* CS 42xB */
92 #define MD_4239         12 /* CS4239 */
93
94         /* Mixer parameters */
95         int             recmask;
96         int             supported_devices, orig_devices;
97         int             supported_rec_devices, orig_rec_devices;
98         int            *levels;
99         short           mixer_reroute[32];
100         int             dev_no;
101         volatile unsigned long timer_ticks;
102         int             timer_running;
103         int             irq_ok;
104         mixer_ents     *mix_devices;
105         int             mixer_output_port;
106 } ad1848_info;
107
108 typedef struct ad1848_port_info
109 {
110         int             open_mode;
111         int             speed;
112         unsigned char   speed_bits;
113         int             channels;
114         int             audio_format;
115         unsigned char   format_bits;
116 }
117 ad1848_port_info;
118
119 static struct address_info cfg;
120 static int nr_ad1848_devs;
121
122 static bool deskpro_xl;
123 static bool deskpro_m;
124 static bool soundpro;
125
126 static volatile signed char irq2dev[17] = {
127         -1, -1, -1, -1, -1, -1, -1, -1,
128         -1, -1, -1, -1, -1, -1, -1, -1, -1
129 };
130
131 #ifndef EXCLUDE_TIMERS
132 static int timer_installed = -1;
133 #endif
134
135 static int loaded;
136
137 static int ad_format_mask[13 /*devc->model */ ] =
138 {
139         0,
140         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,
141         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
142         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
143         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,       /* AD1845 */
144         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
145         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
146         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
147         AFMT_U8 | AFMT_S16_LE /* CS4235 */,
148         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW        /* Ensoniq Soundscape*/,
149         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
150         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
151         AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM
152 };
153
154 static ad1848_info adev_info[MAX_AUDIO_DEV];
155
156 #define io_Index_Addr(d)        ((d)->base)
157 #define io_Indexed_Data(d)      ((d)->base+1)
158 #define io_Status(d)            ((d)->base+2)
159 #define io_Polled_IO(d)         ((d)->base+3)
160
161 static struct {
162      unsigned char flags;
163 #define CAP_F_TIMER 0x01     
164 } capabilities [10 /*devc->model */ ] = {
165      {0}
166     ,{0}           /* MD_1848  */
167     ,{CAP_F_TIMER} /* MD_4231  */
168     ,{CAP_F_TIMER} /* MD_4231A */
169     ,{CAP_F_TIMER} /* MD_1845  */
170     ,{CAP_F_TIMER} /* MD_4232  */
171     ,{0}           /* MD_C930  */
172     ,{CAP_F_TIMER} /* MD_IWAVE */
173     ,{0}           /* MD_4235  */
174     ,{CAP_F_TIMER} /* MD_1845_SSCAPE */
175 };
176
177 #ifdef CONFIG_PNP
178 static int isapnp       = 1;
179 static int isapnpjump;
180 static bool reverse;
181
182 static int audio_activated;
183 #else
184 static int isapnp;
185 #endif
186
187
188
189 static int      ad1848_open(int dev, int mode);
190 static void     ad1848_close(int dev);
191 static void     ad1848_output_block(int dev, unsigned long buf, int count, int intrflag);
192 static void     ad1848_start_input(int dev, unsigned long buf, int count, int intrflag);
193 static int      ad1848_prepare_for_output(int dev, int bsize, int bcount);
194 static int      ad1848_prepare_for_input(int dev, int bsize, int bcount);
195 static void     ad1848_halt(int dev);
196 static void     ad1848_halt_input(int dev);
197 static void     ad1848_halt_output(int dev);
198 static void     ad1848_trigger(int dev, int bits);
199 static irqreturn_t adintr(int irq, void *dev_id);
200
201 #ifndef EXCLUDE_TIMERS
202 static int ad1848_tmr_install(int dev);
203 static void ad1848_tmr_reprogram(int dev);
204 #endif
205
206 static int ad_read(ad1848_info * devc, int reg)
207 {
208         int x;
209         int timeout = 900000;
210
211         while (timeout > 0 && inb(devc->base) == 0x80)  /*Are we initializing */
212                 timeout--;
213
214         if(reg < 32)
215         {
216                 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
217                 x = inb(io_Indexed_Data(devc));
218         }
219         else
220         {
221                 int xreg, xra;
222
223                 xreg = (reg & 0xff) - 32;
224                 xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
225                 outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
226                 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
227                 x = inb(io_Indexed_Data(devc));
228         }
229
230         return x;
231 }
232
233 static void ad_write(ad1848_info * devc, int reg, int data)
234 {
235         int timeout = 900000;
236
237         while (timeout > 0 && inb(devc->base) == 0x80)  /* Are we initializing */
238                 timeout--;
239
240         if(reg < 32)
241         {
242                 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
243                 outb(((unsigned char) (data & 0xff)), io_Indexed_Data(devc));
244         }
245         else
246         {
247                 int xreg, xra;
248                 
249                 xreg = (reg & 0xff) - 32;
250                 xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
251                 outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
252                 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
253                 outb((unsigned char) (data & 0xff), io_Indexed_Data(devc));
254         }
255 }
256
257 static void wait_for_calibration(ad1848_info * devc)
258 {
259         int timeout = 0;
260
261         /*
262          * Wait until the auto calibration process has finished.
263          *
264          * 1)       Wait until the chip becomes ready (reads don't return 0x80).
265          * 2)       Wait until the ACI bit of I11 gets on and then off.
266          */
267
268         timeout = 100000;
269         while (timeout > 0 && inb(devc->base) == 0x80)
270                 timeout--;
271         if (inb(devc->base) & 0x80)
272                 printk(KERN_WARNING "ad1848: Auto calibration timed out(1).\n");
273
274         timeout = 100;
275         while (timeout > 0 && !(ad_read(devc, 11) & 0x20))
276                 timeout--;
277         if (!(ad_read(devc, 11) & 0x20))
278                 return;
279
280         timeout = 80000;
281         while (timeout > 0 && (ad_read(devc, 11) & 0x20))
282                 timeout--;
283         if (ad_read(devc, 11) & 0x20)
284                 if ((devc->model != MD_1845) && (devc->model != MD_1845_SSCAPE))
285                         printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n");
286 }
287
288 static void ad_mute(ad1848_info * devc)
289 {
290         int i;
291         unsigned char prev;
292
293         /*
294          * Save old register settings and mute output channels
295          */
296          
297         for (i = 6; i < 8; i++)
298         {
299                 prev = devc->saved_regs[i] = ad_read(devc, i);
300         }
301
302 }
303
304 static void ad_unmute(ad1848_info * devc)
305 {
306 }
307
308 static void ad_enter_MCE(ad1848_info * devc)
309 {
310         int timeout = 1000;
311         unsigned short prev;
312
313         while (timeout > 0 && inb(devc->base) == 0x80)  /*Are we initializing */
314                 timeout--;
315
316         devc->MCE_bit = 0x40;
317         prev = inb(io_Index_Addr(devc));
318         if (prev & 0x40)
319         {
320                 return;
321         }
322         outb((devc->MCE_bit), io_Index_Addr(devc));
323 }
324
325 static void ad_leave_MCE(ad1848_info * devc)
326 {
327         unsigned char prev, acal;
328         int timeout = 1000;
329
330         while (timeout > 0 && inb(devc->base) == 0x80)  /*Are we initializing */
331                 timeout--;
332
333         acal = ad_read(devc, 9);
334
335         devc->MCE_bit = 0x00;
336         prev = inb(io_Index_Addr(devc));
337         outb((0x00), io_Index_Addr(devc));      /* Clear the MCE bit */
338
339         if ((prev & 0x40) == 0) /* Not in MCE mode */
340         {
341                 return;
342         }
343         outb((0x00), io_Index_Addr(devc));      /* Clear the MCE bit */
344         if (acal & 0x08)        /* Auto calibration is enabled */
345                 wait_for_calibration(devc);
346 }
347
348 static int ad1848_set_recmask(ad1848_info * devc, int mask)
349 {
350         unsigned char   recdev;
351         int             i, n;
352         unsigned long flags;
353
354         mask &= devc->supported_rec_devices;
355
356         /* Rename the mixer bits if necessary */
357         for (i = 0; i < 32; i++)
358         {
359                 if (devc->mixer_reroute[i] != i)
360                 {
361                         if (mask & (1 << i))
362                         {
363                                 mask &= ~(1 << i);
364                                 mask |= (1 << devc->mixer_reroute[i]);
365                         }
366                 }
367         }
368         
369         n = 0;
370         for (i = 0; i < 32; i++)        /* Count selected device bits */
371                 if (mask & (1 << i))
372                         n++;
373
374         spin_lock_irqsave(&devc->lock,flags);
375         if (!soundpro) {
376                 if (n == 0)
377                         mask = SOUND_MASK_MIC;
378                 else if (n != 1) {      /* Too many devices selected */
379                         mask &= ~devc->recmask; /* Filter out active settings */
380
381                         n = 0;
382                         for (i = 0; i < 32; i++)        /* Count selected device bits */
383                                 if (mask & (1 << i))
384                                         n++;
385
386                         if (n != 1)
387                                 mask = SOUND_MASK_MIC;
388                 }
389                 switch (mask) {
390                 case SOUND_MASK_MIC:
391                         recdev = 2;
392                         break;
393
394                 case SOUND_MASK_LINE:
395                 case SOUND_MASK_LINE3:
396                         recdev = 0;
397                         break;
398
399                 case SOUND_MASK_CD:
400                 case SOUND_MASK_LINE1:
401                         recdev = 1;
402                         break;
403
404                 case SOUND_MASK_IMIX:
405                         recdev = 3;
406                         break;
407
408                 default:
409                         mask = SOUND_MASK_MIC;
410                         recdev = 2;
411                 }
412
413                 recdev <<= 6;
414                 ad_write(devc, 0, (ad_read(devc, 0) & 0x3f) | recdev);
415                 ad_write(devc, 1, (ad_read(devc, 1) & 0x3f) | recdev);
416         } else { /* soundpro */
417                 unsigned char val;
418                 int set_rec_bit;
419                 int j;
420
421                 for (i = 0; i < 32; i++) {      /* For each bit */
422                         if ((devc->supported_rec_devices & (1 << i)) == 0)
423                                 continue;       /* Device not supported */
424
425                         for (j = LEFT_CHN; j <= RIGHT_CHN; j++) {
426                                 if (devc->mix_devices[i][j].nbits == 0) /* Inexistent channel */
427                                         continue;
428
429                                 /*
430                                  * This is tricky:
431                                  * set_rec_bit becomes 1 if the corresponding bit in mask is set
432                                  * then it gets flipped if the polarity is inverse
433                                  */
434                                 set_rec_bit = ((mask & (1 << i)) != 0) ^ devc->mix_devices[i][j].recpol;
435
436                                 val = ad_read(devc, devc->mix_devices[i][j].recreg);
437                                 val &= ~(1 << devc->mix_devices[i][j].recpos);
438                                 val |= (set_rec_bit << devc->mix_devices[i][j].recpos);
439                                 ad_write(devc, devc->mix_devices[i][j].recreg, val);
440                         }
441                 }
442         }
443         spin_unlock_irqrestore(&devc->lock,flags);
444
445         /* Rename the mixer bits back if necessary */
446         for (i = 0; i < 32; i++)
447         {
448                 if (devc->mixer_reroute[i] != i)
449                 {
450                         if (mask & (1 << devc->mixer_reroute[i]))
451                         {
452                                 mask &= ~(1 << devc->mixer_reroute[i]);
453                                 mask |= (1 << i);
454                         }
455                 }
456         }
457         devc->recmask = mask;
458         return mask;
459 }
460
461 static void oss_change_bits(ad1848_info *devc, unsigned char *regval,
462                         unsigned char *muteval, int dev, int chn, int newval)
463 {
464         unsigned char mask;
465         int shift;
466         int mute;
467         int mutemask;
468         int set_mute_bit;
469
470         set_mute_bit = (newval == 0) ^ devc->mix_devices[dev][chn].mutepol;
471
472         if (devc->mix_devices[dev][chn].polarity == 1)  /* Reverse */
473                 newval = 100 - newval;
474
475         mask = (1 << devc->mix_devices[dev][chn].nbits) - 1;
476         shift = devc->mix_devices[dev][chn].bitpos;
477
478         if (devc->mix_devices[dev][chn].mutepos == 8)
479         {                       /* if there is no mute bit */
480                 mute = 0;       /* No mute bit; do nothing special */
481                 mutemask = ~0;  /* No mute bit; do nothing special */
482         }
483         else
484         {
485                 mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos);
486                 mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos);
487         }
488
489         newval = (int) ((newval * mask) + 50) / 100;    /* Scale it */
490         *regval &= ~(mask << shift);                    /* Clear bits */
491         *regval |= (newval & mask) << shift;            /* Set new value */
492
493         *muteval &= mutemask;
494         *muteval |= mute;
495 }
496
497 static int ad1848_mixer_get(ad1848_info * devc, int dev)
498 {
499         if (!((1 << dev) & devc->supported_devices))
500                 return -EINVAL;
501
502         dev = devc->mixer_reroute[dev];
503
504         return devc->levels[dev];
505 }
506
507 static void ad1848_mixer_set_channel(ad1848_info *devc, int dev, int value, int channel)
508 {
509         int regoffs, muteregoffs;
510         unsigned char val, muteval;
511         unsigned long flags;
512
513         regoffs = devc->mix_devices[dev][channel].regno;
514         muteregoffs = devc->mix_devices[dev][channel].mutereg;
515         val = ad_read(devc, regoffs);
516
517         if (muteregoffs != regoffs) {
518                 muteval = ad_read(devc, muteregoffs);
519                 oss_change_bits(devc, &val, &muteval, dev, channel, value);
520         }
521         else
522                 oss_change_bits(devc, &val, &val, dev, channel, value);
523
524         spin_lock_irqsave(&devc->lock,flags);
525         ad_write(devc, regoffs, val);
526         devc->saved_regs[regoffs] = val;
527         if (muteregoffs != regoffs) {
528                 ad_write(devc, muteregoffs, muteval);
529                 devc->saved_regs[muteregoffs] = muteval;
530         }
531         spin_unlock_irqrestore(&devc->lock,flags);
532 }
533
534 static int ad1848_mixer_set(ad1848_info * devc, int dev, int value)
535 {
536         int left = value & 0x000000ff;
537         int right = (value & 0x0000ff00) >> 8;
538         int retvol;
539
540         if (dev > 31)
541                 return -EINVAL;
542
543         if (!(devc->supported_devices & (1 << dev)))
544                 return -EINVAL;
545
546         dev = devc->mixer_reroute[dev];
547
548         if (devc->mix_devices[dev][LEFT_CHN].nbits == 0)
549                 return -EINVAL;
550
551         if (left > 100)
552                 left = 100;
553         if (right > 100)
554                 right = 100;
555
556         if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0)       /* Mono control */
557                 right = left;
558
559         retvol = left | (right << 8);
560
561         /* Scale volumes */
562         left = mix_cvt[left];
563         right = mix_cvt[right];
564
565         devc->levels[dev] = retvol;
566
567         /*
568          * Set the left channel
569          */
570         ad1848_mixer_set_channel(devc, dev, left, LEFT_CHN);
571
572         /*
573          * Set the right channel
574          */
575         if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0)
576                 goto out;
577         ad1848_mixer_set_channel(devc, dev, right, RIGHT_CHN);
578
579  out:
580         return retvol;
581 }
582
583 static void ad1848_mixer_reset(ad1848_info * devc)
584 {
585         int i;
586         char name[32];
587         unsigned long flags;
588
589         devc->mix_devices = &(ad1848_mix_devices[0]);
590
591         sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs);
592
593         for (i = 0; i < 32; i++)
594                 devc->mixer_reroute[i] = i;
595
596         devc->supported_rec_devices = MODE1_REC_DEVICES;
597
598         switch (devc->model)
599         {
600                 case MD_4231:
601                 case MD_4231A:
602                 case MD_1845:
603                 case MD_1845_SSCAPE:
604                         devc->supported_devices = MODE2_MIXER_DEVICES;
605                         break;
606
607                 case MD_C930:
608                         devc->supported_devices = C930_MIXER_DEVICES;
609                         devc->mix_devices = &(c930_mix_devices[0]);
610                         break;
611
612                 case MD_IWAVE:
613                         devc->supported_devices = MODE3_MIXER_DEVICES;
614                         devc->mix_devices = &(iwave_mix_devices[0]);
615                         break;
616
617                 case MD_42xB:
618                 case MD_4239:
619                         devc->mix_devices = &(cs42xb_mix_devices[0]);
620                         devc->supported_devices = MODE3_MIXER_DEVICES;
621                         break;
622                 case MD_4232:
623                 case MD_4235:
624                 case MD_4236:
625                         devc->supported_devices = MODE3_MIXER_DEVICES;
626                         break;
627
628                 case MD_1848:
629                         if (soundpro) {
630                                 devc->supported_devices = SPRO_MIXER_DEVICES;
631                                 devc->supported_rec_devices = SPRO_REC_DEVICES;
632                                 devc->mix_devices = &(spro_mix_devices[0]);
633                                 break;
634                         }
635
636                 default:
637                         devc->supported_devices = MODE1_MIXER_DEVICES;
638         }
639
640         devc->orig_devices = devc->supported_devices;
641         devc->orig_rec_devices = devc->supported_rec_devices;
642
643         devc->levels = load_mixer_volumes(name, default_mixer_levels, 1);
644
645         for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
646         {
647                 if (devc->supported_devices & (1 << i))
648                         ad1848_mixer_set(devc, i, devc->levels[i]);
649         }
650         
651         ad1848_set_recmask(devc, SOUND_MASK_MIC);
652         
653         devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT;
654
655         spin_lock_irqsave(&devc->lock,flags);
656         if (!soundpro) {
657                 if (devc->mixer_output_port & AUDIO_SPEAKER)
658                         ad_write(devc, 26, ad_read(devc, 26) & ~0x40);  /* Unmute mono out */
659                 else
660                         ad_write(devc, 26, ad_read(devc, 26) | 0x40);   /* Mute mono out */
661         } else {
662                 /*
663                  * From the "wouldn't it be nice if the mixer API had (better)
664                  * support for custom stuff" category
665                  */
666                 /* Enable surround mode and SB16 mixer */
667                 ad_write(devc, 16, 0x60);
668         }
669         spin_unlock_irqrestore(&devc->lock,flags);
670 }
671
672 static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
673 {
674         ad1848_info *devc = mixer_devs[dev]->devc;
675         int val;
676
677         if (cmd == SOUND_MIXER_PRIVATE1) 
678         {
679                 if (get_user(val, (int __user *)arg))
680                         return -EFAULT;
681
682                 if (val != 0xffff) 
683                 {
684                         unsigned long flags;
685                         val &= (AUDIO_SPEAKER | AUDIO_HEADPHONE | AUDIO_LINE_OUT);
686                         devc->mixer_output_port = val;
687                         val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT;        /* Always on */
688                         devc->mixer_output_port = val;
689                         spin_lock_irqsave(&devc->lock,flags);
690                         if (val & AUDIO_SPEAKER)
691                                 ad_write(devc, 26, ad_read(devc, 26) & ~0x40);  /* Unmute mono out */
692                         else
693                                 ad_write(devc, 26, ad_read(devc, 26) | 0x40);           /* Mute mono out */
694                         spin_unlock_irqrestore(&devc->lock,flags);
695                 }
696                 val = devc->mixer_output_port;
697                 return put_user(val, (int __user *)arg);
698         }
699         if (cmd == SOUND_MIXER_PRIVATE2)
700         {
701                 if (get_user(val, (int __user *)arg))
702                         return -EFAULT;
703                 return(ad1848_control(AD1848_MIXER_REROUTE, val));
704         }
705         if (((cmd >> 8) & 0xff) == 'M') 
706         {
707                 if (_SIOC_DIR(cmd) & _SIOC_WRITE)
708                 {
709                         switch (cmd & 0xff) 
710                         {
711                                 case SOUND_MIXER_RECSRC:
712                                         if (get_user(val, (int __user *)arg))
713                                                 return -EFAULT;
714                                         val = ad1848_set_recmask(devc, val);
715                                         break;
716                                 
717                                 default:
718                                         if (get_user(val, (int __user *)arg))
719                                                 return -EFAULT;
720                                         val = ad1848_mixer_set(devc, cmd & 0xff, val);
721                                         break;
722                         } 
723                         return put_user(val, (int __user *)arg);
724                 }
725                 else
726                 {
727                         switch (cmd & 0xff) 
728                         {
729                                 /*
730                                  * Return parameters
731                                  */
732                             
733                                 case SOUND_MIXER_RECSRC:
734                                         val = devc->recmask;
735                                         break;
736                                 
737                                 case SOUND_MIXER_DEVMASK:
738                                         val = devc->supported_devices;
739                                         break;
740                                 
741                                 case SOUND_MIXER_STEREODEVS:
742                                         val = devc->supported_devices;
743                                         if (devc->model != MD_C930)
744                                                 val &= ~(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX);
745                                         break;
746                                 
747                                 case SOUND_MIXER_RECMASK:
748                                         val = devc->supported_rec_devices;
749                                         break;
750
751                                 case SOUND_MIXER_CAPS:
752                                         val=SOUND_CAP_EXCL_INPUT;
753                                         break;
754
755                                 default:
756                                         val = ad1848_mixer_get(devc, cmd & 0xff);
757                                         break;
758                         }
759                         return put_user(val, (int __user *)arg);
760                 }
761         }
762         else
763                 return -EINVAL;
764 }
765
766 static int ad1848_set_speed(int dev, int arg)
767 {
768         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
769         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
770
771         /*
772          * The sampling speed is encoded in the least significant nibble of I8. The
773          * LSB selects the clock source (0=24.576 MHz, 1=16.9344 MHz) and other
774          * three bits select the divisor (indirectly):
775          *
776          * The available speeds are in the following table. Keep the speeds in
777          * the increasing order.
778          */
779         typedef struct
780         {
781                 int             speed;
782                 unsigned char   bits;
783         }
784         speed_struct;
785
786         static speed_struct speed_table[] =
787         {
788                 {5510, (0 << 1) | 1},
789                 {5510, (0 << 1) | 1},
790                 {6620, (7 << 1) | 1},
791                 {8000, (0 << 1) | 0},
792                 {9600, (7 << 1) | 0},
793                 {11025, (1 << 1) | 1},
794                 {16000, (1 << 1) | 0},
795                 {18900, (2 << 1) | 1},
796                 {22050, (3 << 1) | 1},
797                 {27420, (2 << 1) | 0},
798                 {32000, (3 << 1) | 0},
799                 {33075, (6 << 1) | 1},
800                 {37800, (4 << 1) | 1},
801                 {44100, (5 << 1) | 1},
802                 {48000, (6 << 1) | 0}
803         };
804
805         int i, n, selected = -1;
806
807         n = sizeof(speed_table) / sizeof(speed_struct);
808
809         if (arg <= 0)
810                 return portc->speed;
811
812         if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)    /* AD1845 has different timer than others */
813         {
814                 if (arg < 4000)
815                         arg = 4000;
816                 if (arg > 50000)
817                         arg = 50000;
818
819                 portc->speed = arg;
820                 portc->speed_bits = speed_table[3].bits;
821                 return portc->speed;
822         }
823         if (arg < speed_table[0].speed)
824                 selected = 0;
825         if (arg > speed_table[n - 1].speed)
826                 selected = n - 1;
827
828         for (i = 1 /*really */ ; selected == -1 && i < n; i++)
829         {
830                 if (speed_table[i].speed == arg)
831                         selected = i;
832                 else if (speed_table[i].speed > arg)
833                 {
834                         int diff1, diff2;
835
836                         diff1 = arg - speed_table[i - 1].speed;
837                         diff2 = speed_table[i].speed - arg;
838
839                         if (diff1 < diff2)
840                                 selected = i - 1;
841                         else
842                                 selected = i;
843                 }
844         }
845         if (selected == -1)
846         {
847                 printk(KERN_WARNING "ad1848: Can't find speed???\n");
848                 selected = 3;
849         }
850         portc->speed = speed_table[selected].speed;
851         portc->speed_bits = speed_table[selected].bits;
852         return portc->speed;
853 }
854
855 static short ad1848_set_channels(int dev, short arg)
856 {
857         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
858
859         if (arg != 1 && arg != 2)
860                 return portc->channels;
861
862         portc->channels = arg;
863         return arg;
864 }
865
866 static unsigned int ad1848_set_bits(int dev, unsigned int arg)
867 {
868         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
869         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
870
871         static struct format_tbl
872         {
873                   int             format;
874                   unsigned char   bits;
875         }
876         format2bits[] =
877         {
878                 {
879                         0, 0
880                 }
881                 ,
882                 {
883                         AFMT_MU_LAW, 1
884                 }
885                 ,
886                 {
887                         AFMT_A_LAW, 3
888                 }
889                 ,
890                 {
891                         AFMT_IMA_ADPCM, 5
892                 }
893                 ,
894                 {
895                         AFMT_U8, 0
896                 }
897                 ,
898                 {
899                         AFMT_S16_LE, 2
900                 }
901                 ,
902                 {
903                         AFMT_S16_BE, 6
904                 }
905                 ,
906                 {
907                         AFMT_S8, 0
908                 }
909                 ,
910                 {
911                         AFMT_U16_LE, 0
912                 }
913                 ,
914                 {
915                         AFMT_U16_BE, 0
916                 }
917         };
918         int i, n = sizeof(format2bits) / sizeof(struct format_tbl);
919
920         if (arg == 0)
921                 return portc->audio_format;
922
923         if (!(arg & ad_format_mask[devc->model]))
924                 arg = AFMT_U8;
925
926         portc->audio_format = arg;
927
928         for (i = 0; i < n; i++)
929                 if (format2bits[i].format == arg)
930                 {
931                         if ((portc->format_bits = format2bits[i].bits) == 0)
932                                 return portc->audio_format = AFMT_U8;           /* Was not supported */
933
934                         return arg;
935                 }
936         /* Still hanging here. Something must be terribly wrong */
937         portc->format_bits = 0;
938         return portc->audio_format = AFMT_U8;
939 }
940
941 static struct audio_driver ad1848_audio_driver =
942 {
943         .owner                  = THIS_MODULE,
944         .open                   = ad1848_open,
945         .close                  = ad1848_close,
946         .output_block           = ad1848_output_block,
947         .start_input            = ad1848_start_input,
948         .prepare_for_input      = ad1848_prepare_for_input,
949         .prepare_for_output     = ad1848_prepare_for_output,
950         .halt_io                = ad1848_halt,
951         .halt_input             = ad1848_halt_input,
952         .halt_output            = ad1848_halt_output,
953         .trigger                = ad1848_trigger,
954         .set_speed              = ad1848_set_speed,
955         .set_bits               = ad1848_set_bits,
956         .set_channels           = ad1848_set_channels
957 };
958
959 static struct mixer_operations ad1848_mixer_operations =
960 {
961         .owner  = THIS_MODULE,
962         .id     = "SOUNDPORT",
963         .name   = "AD1848/CS4248/CS4231",
964         .ioctl  = ad1848_mixer_ioctl
965 };
966
967 static int ad1848_open(int dev, int mode)
968 {
969         ad1848_info    *devc;
970         ad1848_port_info *portc;
971         unsigned long   flags;
972
973         if (dev < 0 || dev >= num_audiodevs)
974                 return -ENXIO;
975
976         devc = (ad1848_info *) audio_devs[dev]->devc;
977         portc = (ad1848_port_info *) audio_devs[dev]->portc;
978
979         /* here we don't have to protect against intr */
980         spin_lock(&devc->lock);
981         if (portc->open_mode || (devc->open_mode & mode))
982         {
983                 spin_unlock(&devc->lock);
984                 return -EBUSY;
985         }
986         devc->dual_dma = 0;
987
988         if (audio_devs[dev]->flags & DMA_DUPLEX)
989         {
990                 devc->dual_dma = 1;
991         }
992         devc->intr_active = 0;
993         devc->audio_mode = 0;
994         devc->open_mode |= mode;
995         portc->open_mode = mode;
996         spin_unlock(&devc->lock);
997         ad1848_trigger(dev, 0);
998
999         if (mode & OPEN_READ)
1000                 devc->record_dev = dev;
1001         if (mode & OPEN_WRITE)
1002                 devc->playback_dev = dev;
1003 /*
1004  * Mute output until the playback really starts. This decreases clicking (hope so).
1005  */
1006         spin_lock_irqsave(&devc->lock,flags);
1007         ad_mute(devc);
1008         spin_unlock_irqrestore(&devc->lock,flags);
1009
1010         return 0;
1011 }
1012
1013 static void ad1848_close(int dev)
1014 {
1015         unsigned long   flags;
1016         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1017         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1018
1019         DEB(printk("ad1848_close(void)\n"));
1020
1021         devc->intr_active = 0;
1022         ad1848_halt(dev);
1023
1024         spin_lock_irqsave(&devc->lock,flags);
1025
1026         devc->audio_mode = 0;
1027         devc->open_mode &= ~portc->open_mode;
1028         portc->open_mode = 0;
1029
1030         ad_unmute(devc);
1031         spin_unlock_irqrestore(&devc->lock,flags);
1032 }
1033
1034 static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag)
1035 {
1036         unsigned long   flags, cnt;
1037         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1038         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1039
1040         cnt = count;
1041
1042         if (portc->audio_format == AFMT_IMA_ADPCM)
1043         {
1044                 cnt /= 4;
1045         }
1046         else
1047         {
1048                 if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))  /* 16 bit data */
1049                         cnt >>= 1;
1050         }
1051         if (portc->channels > 1)
1052                 cnt >>= 1;
1053         cnt--;
1054
1055         if ((devc->audio_mode & PCM_ENABLE_OUTPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
1056             intrflag &&
1057             cnt == devc->xfer_count)
1058         {
1059                 devc->audio_mode |= PCM_ENABLE_OUTPUT;
1060                 devc->intr_active = 1;
1061                 return; /*
1062                          * Auto DMA mode on. No need to react
1063                          */
1064         }
1065         spin_lock_irqsave(&devc->lock,flags);
1066
1067         ad_write(devc, 15, (unsigned char) (cnt & 0xff));
1068         ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
1069
1070         devc->xfer_count = cnt;
1071         devc->audio_mode |= PCM_ENABLE_OUTPUT;
1072         devc->intr_active = 1;
1073         spin_unlock_irqrestore(&devc->lock,flags);
1074 }
1075
1076 static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag)
1077 {
1078         unsigned long   flags, cnt;
1079         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1080         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1081
1082         cnt = count;
1083         if (portc->audio_format == AFMT_IMA_ADPCM)
1084         {
1085                 cnt /= 4;
1086         }
1087         else
1088         {
1089                 if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE))  /* 16 bit data */
1090                         cnt >>= 1;
1091         }
1092         if (portc->channels > 1)
1093                 cnt >>= 1;
1094         cnt--;
1095
1096         if ((devc->audio_mode & PCM_ENABLE_INPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
1097                 intrflag &&
1098                 cnt == devc->xfer_count)
1099         {
1100                 devc->audio_mode |= PCM_ENABLE_INPUT;
1101                 devc->intr_active = 1;
1102                 return; /*
1103                          * Auto DMA mode on. No need to react
1104                          */
1105         }
1106         spin_lock_irqsave(&devc->lock,flags);
1107
1108         if (devc->model == MD_1848)
1109         {
1110                   ad_write(devc, 15, (unsigned char) (cnt & 0xff));
1111                   ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
1112         }
1113         else
1114         {
1115                   ad_write(devc, 31, (unsigned char) (cnt & 0xff));
1116                   ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff));
1117         }
1118
1119         ad_unmute(devc);
1120
1121         devc->xfer_count = cnt;
1122         devc->audio_mode |= PCM_ENABLE_INPUT;
1123         devc->intr_active = 1;
1124         spin_unlock_irqrestore(&devc->lock,flags);
1125 }
1126
1127 static int ad1848_prepare_for_output(int dev, int bsize, int bcount)
1128 {
1129         int             timeout;
1130         unsigned char   fs, old_fs, tmp = 0;
1131         unsigned long   flags;
1132         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1133         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1134
1135         ad_mute(devc);
1136
1137         spin_lock_irqsave(&devc->lock,flags);
1138         fs = portc->speed_bits | (portc->format_bits << 5);
1139
1140         if (portc->channels > 1)
1141                 fs |= 0x10;
1142
1143         ad_enter_MCE(devc);     /* Enables changes to the format select reg */
1144
1145         if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* Use alternate speed select registers */
1146         {
1147                 fs &= 0xf0;     /* Mask off the rate select bits */
1148
1149                 ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */
1150                 ad_write(devc, 23, portc->speed & 0xff);        /* Speed LSB */
1151         }
1152         old_fs = ad_read(devc, 8);
1153
1154         if (devc->model == MD_4232 || devc->model >= MD_4236)
1155         {
1156                 tmp = ad_read(devc, 16);
1157                 ad_write(devc, 16, tmp | 0x30);
1158         }
1159         if (devc->model == MD_IWAVE)
1160                 ad_write(devc, 17, 0xc2);       /* Disable variable frequency select */
1161
1162         ad_write(devc, 8, fs);
1163
1164         /*
1165          * Write to I8 starts resynchronization. Wait until it completes.
1166          */
1167
1168         timeout = 0;
1169         while (timeout < 100 && inb(devc->base) != 0x80)
1170                 timeout++;
1171         timeout = 0;
1172         while (timeout < 10000 && inb(devc->base) == 0x80)
1173                 timeout++;
1174
1175         if (devc->model >= MD_4232)
1176                 ad_write(devc, 16, tmp & ~0x30);
1177
1178         ad_leave_MCE(devc);     /*
1179                                  * Starts the calibration process.
1180                                  */
1181         spin_unlock_irqrestore(&devc->lock,flags);
1182         devc->xfer_count = 0;
1183
1184 #ifndef EXCLUDE_TIMERS
1185         if (dev == timer_installed && devc->timer_running)
1186                 if ((fs & 0x01) != (old_fs & 0x01))
1187                 {
1188                         ad1848_tmr_reprogram(dev);
1189                 }
1190 #endif
1191         ad1848_halt_output(dev);
1192         return 0;
1193 }
1194
1195 static int ad1848_prepare_for_input(int dev, int bsize, int bcount)
1196 {
1197         int timeout;
1198         unsigned char fs, old_fs, tmp = 0;
1199         unsigned long flags;
1200         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1201         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1202
1203         if (devc->audio_mode)
1204                 return 0;
1205
1206         spin_lock_irqsave(&devc->lock,flags);
1207         fs = portc->speed_bits | (portc->format_bits << 5);
1208
1209         if (portc->channels > 1)
1210                 fs |= 0x10;
1211
1212         ad_enter_MCE(devc);     /* Enables changes to the format select reg */
1213
1214         if ((devc->model == MD_1845) || (devc->model == MD_1845_SSCAPE))        /* Use alternate speed select registers */
1215         {
1216                 fs &= 0xf0;     /* Mask off the rate select bits */
1217
1218                 ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */
1219                 ad_write(devc, 23, portc->speed & 0xff);        /* Speed LSB */
1220         }
1221         if (devc->model == MD_4232)
1222         {
1223                 tmp = ad_read(devc, 16);
1224                 ad_write(devc, 16, tmp | 0x30);
1225         }
1226         if (devc->model == MD_IWAVE)
1227                 ad_write(devc, 17, 0xc2);       /* Disable variable frequency select */
1228
1229         /*
1230          * If mode >= 2 (CS4231), set I28. It's the capture format register.
1231          */
1232         
1233         if (devc->model != MD_1848)
1234         {
1235                 old_fs = ad_read(devc, 28);
1236                 ad_write(devc, 28, fs);
1237
1238                 /*
1239                  * Write to I28 starts resynchronization. Wait until it completes.
1240                  */
1241                 
1242                 timeout = 0;
1243                 while (timeout < 100 && inb(devc->base) != 0x80)
1244                         timeout++;
1245
1246                 timeout = 0;
1247                 while (timeout < 10000 && inb(devc->base) == 0x80)
1248                         timeout++;
1249
1250                 if (devc->model != MD_1848 && devc->model != MD_1845 && devc->model != MD_1845_SSCAPE)
1251                 {
1252                         /*
1253                          * CS4231 compatible devices don't have separate sampling rate selection
1254                          * register for recording an playback. The I8 register is shared so we have to
1255                          * set the speed encoding bits of it too.
1256                          */
1257                         unsigned char   tmp = portc->speed_bits | (ad_read(devc, 8) & 0xf0);
1258
1259                         ad_write(devc, 8, tmp);
1260                         /*
1261                          * Write to I8 starts resynchronization. Wait until it completes.
1262                          */
1263                         timeout = 0;
1264                         while (timeout < 100 && inb(devc->base) != 0x80)
1265                                 timeout++;
1266
1267                         timeout = 0;
1268                         while (timeout < 10000 && inb(devc->base) == 0x80)
1269                                 timeout++;
1270                 }
1271         }
1272         else
1273         {                       /* For AD1848 set I8. */
1274
1275                 old_fs = ad_read(devc, 8);
1276                 ad_write(devc, 8, fs);
1277                 /*
1278                  * Write to I8 starts resynchronization. Wait until it completes.
1279                  */
1280                 timeout = 0;
1281                 while (timeout < 100 && inb(devc->base) != 0x80)
1282                         timeout++;
1283                 timeout = 0;
1284                 while (timeout < 10000 && inb(devc->base) == 0x80)
1285                         timeout++;
1286         }
1287
1288         if (devc->model == MD_4232)
1289                 ad_write(devc, 16, tmp & ~0x30);
1290
1291         ad_leave_MCE(devc);     /*
1292                                  * Starts the calibration process.
1293                                  */
1294         spin_unlock_irqrestore(&devc->lock,flags);
1295         devc->xfer_count = 0;
1296
1297 #ifndef EXCLUDE_TIMERS
1298         if (dev == timer_installed && devc->timer_running)
1299         {
1300                 if ((fs & 0x01) != (old_fs & 0x01))
1301                 {
1302                         ad1848_tmr_reprogram(dev);
1303                 }
1304         }
1305 #endif
1306         ad1848_halt_input(dev);
1307         return 0;
1308 }
1309
1310 static void ad1848_halt(int dev)
1311 {
1312         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1313         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1314
1315         unsigned char   bits = ad_read(devc, 9);
1316
1317         if (bits & 0x01 && (portc->open_mode & OPEN_WRITE))
1318                 ad1848_halt_output(dev);
1319
1320         if (bits & 0x02 && (portc->open_mode & OPEN_READ))
1321                 ad1848_halt_input(dev);
1322         devc->audio_mode = 0;
1323 }
1324
1325 static void ad1848_halt_input(int dev)
1326 {
1327         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1328         unsigned long   flags;
1329
1330         if (!(ad_read(devc, 9) & 0x02))
1331                 return;         /* Capture not enabled */
1332
1333         spin_lock_irqsave(&devc->lock,flags);
1334
1335         ad_mute(devc);
1336
1337         {
1338                 int             tmout;
1339                 
1340                 if(!isa_dma_bridge_buggy)
1341                         disable_dma(audio_devs[dev]->dmap_in->dma);
1342
1343                 for (tmout = 0; tmout < 100000; tmout++)
1344                         if (ad_read(devc, 11) & 0x10)
1345                                 break;
1346                 ad_write(devc, 9, ad_read(devc, 9) & ~0x02);    /* Stop capture */
1347
1348                 if(!isa_dma_bridge_buggy)
1349                         enable_dma(audio_devs[dev]->dmap_in->dma);
1350                 devc->audio_mode &= ~PCM_ENABLE_INPUT;
1351         }
1352
1353         outb(0, io_Status(devc));       /* Clear interrupt status */
1354         outb(0, io_Status(devc));       /* Clear interrupt status */
1355
1356         devc->audio_mode &= ~PCM_ENABLE_INPUT;
1357
1358         spin_unlock_irqrestore(&devc->lock,flags);
1359 }
1360
1361 static void ad1848_halt_output(int dev)
1362 {
1363         ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1364         unsigned long flags;
1365
1366         if (!(ad_read(devc, 9) & 0x01))
1367                 return;         /* Playback not enabled */
1368
1369         spin_lock_irqsave(&devc->lock,flags);
1370
1371         ad_mute(devc);
1372         {
1373                 int             tmout;
1374
1375                 if(!isa_dma_bridge_buggy)
1376                         disable_dma(audio_devs[dev]->dmap_out->dma);
1377
1378                 for (tmout = 0; tmout < 100000; tmout++)
1379                         if (ad_read(devc, 11) & 0x10)
1380                                 break;
1381                 ad_write(devc, 9, ad_read(devc, 9) & ~0x01);    /* Stop playback */
1382
1383                 if(!isa_dma_bridge_buggy)
1384                        enable_dma(audio_devs[dev]->dmap_out->dma);
1385
1386                 devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
1387         }
1388
1389         outb((0), io_Status(devc));     /* Clear interrupt status */
1390         outb((0), io_Status(devc));     /* Clear interrupt status */
1391
1392         devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
1393
1394         spin_unlock_irqrestore(&devc->lock,flags);
1395 }
1396
1397 static void ad1848_trigger(int dev, int state)
1398 {
1399         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
1400         ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1401         unsigned long   flags;
1402         unsigned char   tmp, old;
1403
1404         spin_lock_irqsave(&devc->lock,flags);
1405         state &= devc->audio_mode;
1406
1407         tmp = old = ad_read(devc, 9);
1408
1409         if (portc->open_mode & OPEN_READ)
1410         {
1411                   if (state & PCM_ENABLE_INPUT)
1412                           tmp |= 0x02;
1413                   else
1414                           tmp &= ~0x02;
1415         }
1416         if (portc->open_mode & OPEN_WRITE)
1417         {
1418                 if (state & PCM_ENABLE_OUTPUT)
1419                         tmp |= 0x01;
1420                 else
1421                         tmp &= ~0x01;
1422         }
1423         /* ad_mute(devc); */
1424         if (tmp != old)
1425         {
1426                   ad_write(devc, 9, tmp);
1427                   ad_unmute(devc);
1428         }
1429         spin_unlock_irqrestore(&devc->lock,flags);
1430 }
1431
1432 static void ad1848_init_hw(ad1848_info * devc)
1433 {
1434         int i;
1435         int *init_values;
1436
1437         /*
1438          * Initial values for the indirect registers of CS4248/AD1848.
1439          */
1440         static int      init_values_a[] =
1441         {
1442                 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
1443                 0x00, 0x0c, 0x02, 0x00, 0x8a, 0x01, 0x00, 0x00,
1444
1445         /* Positions 16 to 31 just for CS4231/2 and ad1845 */
1446                 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
1447                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
1448         };
1449
1450         static int      init_values_b[] =
1451         {
1452                 /* 
1453                    Values for the newer chips
1454                    Some of the register initialization values were changed. In
1455                    order to get rid of the click that preceded PCM playback,
1456                    calibration was disabled on the 10th byte. On that same byte,
1457                    dual DMA was enabled; on the 11th byte, ADC dithering was
1458                    enabled, since that is theoretically desirable; on the 13th
1459                    byte, Mode 3 was selected, to enable access to extended
1460                    registers.
1461                  */
1462                 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
1463                 0x00, 0x00, 0x06, 0x00, 0xe0, 0x01, 0x00, 0x00,
1464                 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
1465                 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
1466         };
1467
1468         /*
1469          *      Select initialisation data
1470          */
1471          
1472         init_values = init_values_a;
1473         if(devc->model >= MD_4236)
1474                 init_values = init_values_b;
1475
1476         for (i = 0; i < 16; i++)
1477                 ad_write(devc, i, init_values[i]);
1478
1479
1480         ad_mute(devc);          /* Initialize some variables */
1481         ad_unmute(devc);        /* Leave it unmuted now */
1482
1483         if (devc->model > MD_1848)
1484         {
1485                 if (devc->model == MD_1845_SSCAPE)
1486                         ad_write(devc, 12, ad_read(devc, 12) | 0x50);
1487                 else 
1488                         ad_write(devc, 12, ad_read(devc, 12) | 0x40);           /* Mode2 = enabled */
1489
1490                 if (devc->model == MD_IWAVE)
1491                         ad_write(devc, 12, 0x6c);       /* Select codec mode 3 */
1492
1493                 if (devc->model != MD_1845_SSCAPE)
1494                         for (i = 16; i < 32; i++)
1495                                 ad_write(devc, i, init_values[i]);
1496
1497                 if (devc->model == MD_IWAVE)
1498                         ad_write(devc, 16, 0x30);       /* Playback and capture counters enabled */
1499         }
1500         if (devc->model > MD_1848)
1501         {
1502                 if (devc->audio_flags & DMA_DUPLEX)
1503                         ad_write(devc, 9, ad_read(devc, 9) & ~0x04);    /* Dual DMA mode */
1504                 else
1505                         ad_write(devc, 9, ad_read(devc, 9) | 0x04);     /* Single DMA mode */
1506
1507                 if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
1508                         ad_write(devc, 27, ad_read(devc, 27) | 0x08);           /* Alternate freq select enabled */
1509
1510                 if (devc->model == MD_IWAVE)
1511                 {               /* Some magic Interwave specific initialization */
1512                         ad_write(devc, 12, 0x6c);       /* Select codec mode 3 */
1513                         ad_write(devc, 16, 0x30);       /* Playback and capture counters enabled */
1514                         ad_write(devc, 17, 0xc2);       /* Alternate feature enable */
1515                 }
1516         }
1517         else
1518         {
1519                   devc->audio_flags &= ~DMA_DUPLEX;
1520                   ad_write(devc, 9, ad_read(devc, 9) | 0x04);   /* Single DMA mode */
1521                   if (soundpro)
1522                           ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */
1523         }
1524
1525         outb((0), io_Status(devc));     /* Clear pending interrupts */
1526
1527         /*
1528          * Toggle the MCE bit. It completes the initialization phase.
1529          */
1530
1531         ad_enter_MCE(devc);     /* In case the bit was off */
1532         ad_leave_MCE(devc);
1533
1534         ad1848_mixer_reset(devc);
1535 }
1536
1537 int ad1848_detect(struct resource *ports, int *ad_flags, int *osp)
1538 {
1539         unsigned char tmp;
1540         ad1848_info *devc = &adev_info[nr_ad1848_devs];
1541         unsigned char tmp1 = 0xff, tmp2 = 0xff;
1542         int optiC930 = 0;       /* OPTi 82C930 flag */
1543         int interwave = 0;
1544         int ad1847_flag = 0;
1545         int cs4248_flag = 0;
1546         int sscape_flag = 0;
1547         int io_base = ports->start;
1548
1549         int i;
1550
1551         DDB(printk("ad1848_detect(%x)\n", io_base));
1552
1553         if (ad_flags)
1554         {
1555                 if (*ad_flags == 0x12345678)
1556                 {
1557                         interwave = 1;
1558                         *ad_flags = 0;
1559                 }
1560                 
1561                 if (*ad_flags == 0x87654321)
1562                 {
1563                         sscape_flag = 1;
1564                         *ad_flags = 0;
1565                 }
1566                 
1567                 if (*ad_flags == 0x12345677)
1568                 {
1569                     cs4248_flag = 1;
1570                     *ad_flags = 0;
1571                 }
1572         }
1573         if (nr_ad1848_devs >= MAX_AUDIO_DEV)
1574         {
1575                 printk(KERN_ERR "ad1848 - Too many audio devices\n");
1576                 return 0;
1577         }
1578         spin_lock_init(&devc->lock);
1579         devc->base = io_base;
1580         devc->irq_ok = 0;
1581         devc->timer_running = 0;
1582         devc->MCE_bit = 0x40;
1583         devc->irq = 0;
1584         devc->open_mode = 0;
1585         devc->chip_name = devc->name = "AD1848";
1586         devc->model = MD_1848;  /* AD1848 or CS4248 */
1587         devc->levels = NULL;
1588         devc->debug_flag = 0;
1589
1590         /*
1591          * Check that the I/O address is in use.
1592          *
1593          * The bit 0x80 of the base I/O port is known to be 0 after the
1594          * chip has performed its power on initialization. Just assume
1595          * this has happened before the OS is starting.
1596          *
1597          * If the I/O address is unused, it typically returns 0xff.
1598          */
1599
1600         if (inb(devc->base) == 0xff)
1601         {
1602                 DDB(printk("ad1848_detect: The base I/O address appears to be dead\n"));
1603         }
1604
1605         /*
1606          * Wait for the device to stop initialization
1607          */
1608         
1609         DDB(printk("ad1848_detect() - step 0\n"));
1610
1611         for (i = 0; i < 10000000; i++)
1612         {
1613                 unsigned char   x = inb(devc->base);
1614
1615                 if (x == 0xff || !(x & 0x80))
1616                         break;
1617         }
1618
1619         DDB(printk("ad1848_detect() - step A\n"));
1620
1621         if (inb(devc->base) == 0x80)    /* Not ready. Let's wait */
1622                 ad_leave_MCE(devc);
1623
1624         if ((inb(devc->base) & 0x80) != 0x00)   /* Not a AD1848 */
1625         {
1626                 DDB(printk("ad1848 detect error - step A (%02x)\n", (int) inb(devc->base)));
1627                 return 0;
1628         }
1629         
1630         /*
1631          * Test if it's possible to change contents of the indirect registers.
1632          * Registers 0 and 1 are ADC volume registers. The bit 0x10 is read only
1633          * so try to avoid using it.
1634          */
1635
1636         DDB(printk("ad1848_detect() - step B\n"));
1637         ad_write(devc, 0, 0xaa);
1638         ad_write(devc, 1, 0x45);        /* 0x55 with bit 0x10 clear */
1639
1640         if ((tmp1 = ad_read(devc, 0)) != 0xaa || (tmp2 = ad_read(devc, 1)) != 0x45)
1641         {
1642                 if (tmp2 == 0x65)       /* AD1847 has couple of bits hardcoded to 1 */
1643                         ad1847_flag = 1;
1644                 else
1645                 {
1646                         DDB(printk("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2));
1647                         return 0;
1648                 }
1649         }
1650         DDB(printk("ad1848_detect() - step C\n"));
1651         ad_write(devc, 0, 0x45);
1652         ad_write(devc, 1, 0xaa);
1653
1654         if ((tmp1 = ad_read(devc, 0)) != 0x45 || (tmp2 = ad_read(devc, 1)) != 0xaa)
1655         {
1656                 if (tmp2 == 0x8a)       /* AD1847 has few bits hardcoded to 1 */
1657                         ad1847_flag = 1;
1658                 else
1659                 {
1660                         DDB(printk("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2));
1661                         return 0;
1662                 }
1663         }
1664
1665         /*
1666          * The indirect register I12 has some read only bits. Let's
1667          * try to change them.
1668          */
1669
1670         DDB(printk("ad1848_detect() - step D\n"));
1671         tmp = ad_read(devc, 12);
1672         ad_write(devc, 12, (~tmp) & 0x0f);
1673
1674         if ((tmp & 0x0f) != ((tmp1 = ad_read(devc, 12)) & 0x0f))
1675         {
1676                 DDB(printk("ad1848 detect error - step D (%x)\n", tmp1));
1677                 return 0;
1678         }
1679         
1680         /*
1681          * NOTE! Last 4 bits of the reg I12 tell the chip revision.
1682          *   0x01=RevB and 0x0A=RevC.
1683          */
1684
1685         /*
1686          * The original AD1848/CS4248 has just 15 indirect registers. This means
1687          * that I0 and I16 should return the same value (etc.).
1688          * However this doesn't work with CS4248. Actually it seems to be impossible
1689          * to detect if the chip is a CS4231 or CS4248.
1690          * Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test fails
1691          * with CS4231.
1692          */
1693
1694         /*
1695          * OPTi 82C930 has mode2 control bit in another place. This test will fail
1696          * with it. Accept this situation as a possible indication of this chip.
1697          */
1698
1699         DDB(printk("ad1848_detect() - step F\n"));
1700         ad_write(devc, 12, 0);  /* Mode2=disabled */
1701
1702         for (i = 0; i < 16; i++)
1703         {
1704                 if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16)))
1705                 {
1706                         DDB(printk("ad1848 detect step F(%d/%x/%x) - OPTi chip???\n", i, tmp1, tmp2));
1707                         if (!ad1847_flag)
1708                                 optiC930 = 1;
1709                         break;
1710                 }
1711         }
1712
1713         /*
1714          * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit (0x40).
1715          * The bit 0x80 is always 1 in CS4248 and CS4231.
1716          */
1717
1718         DDB(printk("ad1848_detect() - step G\n"));
1719
1720         if (ad_flags && *ad_flags == 400)
1721                 *ad_flags = 0;
1722         else
1723                 ad_write(devc, 12, 0x40);       /* Set mode2, clear 0x80 */
1724
1725
1726         if (ad_flags)
1727                 *ad_flags = 0;
1728
1729         tmp1 = ad_read(devc, 12);
1730         if (tmp1 & 0x80)
1731         {
1732                 if (ad_flags)
1733                         *ad_flags |= AD_F_CS4248;
1734
1735                 devc->chip_name = "CS4248";     /* Our best knowledge just now */
1736         }
1737         if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40))
1738         {
1739                 /*
1740                  *      CS4231 detected - is it?
1741                  *
1742                  *      Verify that setting I0 doesn't change I16.
1743                  */
1744                 
1745                 DDB(printk("ad1848_detect() - step H\n"));
1746                 ad_write(devc, 16, 0);  /* Set I16 to known value */
1747
1748                 ad_write(devc, 0, 0x45);
1749                 if ((tmp1 = ad_read(devc, 16)) != 0x45) /* No change -> CS4231? */
1750                 {
1751                         ad_write(devc, 0, 0xaa);
1752                         if ((tmp1 = ad_read(devc, 16)) == 0xaa) /* Rotten bits? */
1753                         {
1754                                 DDB(printk("ad1848 detect error - step H(%x)\n", tmp1));
1755                                 return 0;
1756                         }
1757                         
1758                         /*
1759                          * Verify that some bits of I25 are read only.
1760                          */
1761
1762                         DDB(printk("ad1848_detect() - step I\n"));
1763                         tmp1 = ad_read(devc, 25);       /* Original bits */
1764                         ad_write(devc, 25, ~tmp1);      /* Invert all bits */
1765                         if ((ad_read(devc, 25) & 0xe7) == (tmp1 & 0xe7))
1766                         {
1767                                 int id;
1768
1769                                 /*
1770                                  *      It's at least CS4231
1771                                  */
1772
1773                                 devc->chip_name = "CS4231";
1774                                 devc->model = MD_4231;
1775                                 
1776                                 /*
1777                                  * It could be an AD1845 or CS4231A as well.
1778                                  * CS4231 and AD1845 report the same revision info in I25
1779                                  * while the CS4231A reports different.
1780                                  */
1781
1782                                 id = ad_read(devc, 25);
1783                                 if ((id & 0xe7) == 0x80)        /* Device busy??? */
1784                                         id = ad_read(devc, 25);
1785                                 if ((id & 0xe7) == 0x80)        /* Device still busy??? */
1786                                         id = ad_read(devc, 25);
1787                                 DDB(printk("ad1848_detect() - step J (%02x/%02x)\n", id, ad_read(devc, 25)));
1788
1789                                 if ((id & 0xe7) == 0x80) {
1790                                         /* 
1791                                          * It must be a CS4231 or AD1845. The register I23 of
1792                                          * CS4231 is undefined and it appears to be read only.
1793                                          * AD1845 uses I23 for setting sample rate. Assume
1794                                          * the chip is AD1845 if I23 is changeable.
1795                                          */
1796
1797                                         unsigned char   tmp = ad_read(devc, 23);
1798                                         ad_write(devc, 23, ~tmp);
1799
1800                                         if (interwave)
1801                                         {
1802                                                 devc->model = MD_IWAVE;
1803                                                 devc->chip_name = "IWave";
1804                                         }
1805                                         else if (ad_read(devc, 23) != tmp)      /* AD1845 ? */
1806                                         {
1807                                                 devc->chip_name = "AD1845";
1808                                                 devc->model = MD_1845;
1809                                         }
1810                                         else if (cs4248_flag)
1811                                         {
1812                                                 if (ad_flags)
1813                                                           *ad_flags |= AD_F_CS4248;
1814                                                 devc->chip_name = "CS4248";
1815                                                 devc->model = MD_1848;
1816                                                 ad_write(devc, 12, ad_read(devc, 12) & ~0x40);  /* Mode2 off */
1817                                         }
1818                                         ad_write(devc, 23, tmp);        /* Restore */
1819                                 }
1820                                 else
1821                                 {
1822                                         switch (id & 0x1f) {
1823                                         case 3: /* CS4236/CS4235/CS42xB/CS4239 */
1824                                                 {
1825                                                         int xid;
1826                                                         ad_write(devc, 12, ad_read(devc, 12) | 0x60); /* switch to mode 3 */
1827                                                         ad_write(devc, 23, 0x9c); /* select extended register 25 */
1828                                                         xid = inb(io_Indexed_Data(devc));
1829                                                         ad_write(devc, 12, ad_read(devc, 12) & ~0x60); /* back to mode 0 */
1830                                                         switch (xid & 0x1f)
1831                                                         {
1832                                                                 case 0x00:
1833                                                                         devc->chip_name = "CS4237B(B)";
1834                                                                         devc->model = MD_42xB;
1835                                                                         break;
1836                                                                 case 0x08:
1837                                                                         /* Seems to be a 4238 ?? */
1838                                                                         devc->chip_name = "CS4238";
1839                                                                         devc->model = MD_42xB;
1840                                                                         break;
1841                                                                 case 0x09:
1842                                                                         devc->chip_name = "CS4238B";
1843                                                                         devc->model = MD_42xB;
1844                                                                         break;
1845                                                                 case 0x0b:
1846                                                                         devc->chip_name = "CS4236B";
1847                                                                         devc->model = MD_4236;
1848                                                                         break;
1849                                                                 case 0x10:
1850                                                                         devc->chip_name = "CS4237B";
1851                                                                         devc->model = MD_42xB;
1852                                                                         break;
1853                                                                 case 0x1d:
1854                                                                         devc->chip_name = "CS4235";
1855                                                                         devc->model = MD_4235;
1856                                                                         break;
1857                                                                 case 0x1e:
1858                                                                         devc->chip_name = "CS4239";
1859                                                                         devc->model = MD_4239;
1860                                                                         break;
1861                                                                 default:
1862                                                                         printk("Chip ident is %X.\n", xid&0x1F);
1863                                                                         devc->chip_name = "CS42xx";
1864                                                                         devc->model = MD_4232;
1865                                                                         break;
1866                                                         }
1867                                                 }
1868                                                 break;
1869
1870                                         case 2: /* CS4232/CS4232A */
1871                                                 devc->chip_name = "CS4232";
1872                                                 devc->model = MD_4232;
1873                                                 break;
1874                                 
1875                                         case 0:
1876                                                 if ((id & 0xe0) == 0xa0)
1877                                                 {
1878                                                         devc->chip_name = "CS4231A";
1879                                                         devc->model = MD_4231A;
1880                                                 }
1881                                                 else
1882                                                 {
1883                                                         devc->chip_name = "CS4321";
1884                                                         devc->model = MD_4231;
1885                                                 }
1886                                                 break;
1887
1888                                         default: /* maybe */
1889                                                 DDB(printk("ad1848: I25 = %02x/%02x\n", ad_read(devc, 25), ad_read(devc, 25) & 0xe7));
1890                                                 if (optiC930)
1891                                                 {
1892                                                         devc->chip_name = "82C930";
1893                                                         devc->model = MD_C930;
1894                                                 }
1895                                                 else
1896                                                 {
1897                                                         devc->chip_name = "CS4231";
1898                                                         devc->model = MD_4231;
1899                                                 }
1900                                         }
1901                                 }
1902                         }
1903                         ad_write(devc, 25, tmp1);       /* Restore bits */
1904
1905                         DDB(printk("ad1848_detect() - step K\n"));
1906                 }
1907         } else if (tmp1 == 0x0a) {
1908                 /*
1909                  * Is it perhaps a SoundPro CMI8330?
1910                  * If so, then we should be able to change indirect registers
1911                  * greater than I15 after activating MODE2, even though reading
1912                  * back I12 does not show it.
1913                  */
1914
1915                 /*
1916                  * Let's try comparing register values
1917                  */
1918                 for (i = 0; i < 16; i++) {
1919                         if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) {
1920                                 DDB(printk("ad1848 detect step H(%d/%x/%x) - SoundPro chip?\n", i, tmp1, tmp2));
1921                                 soundpro = 1;
1922                                 devc->chip_name = "SoundPro CMI 8330";
1923                                 break;
1924                         }
1925                 }
1926         }
1927
1928         DDB(printk("ad1848_detect() - step L\n"));
1929         if (ad_flags)
1930         {
1931                   if (devc->model != MD_1848)
1932                           *ad_flags |= AD_F_CS4231;
1933         }
1934         DDB(printk("ad1848_detect() - Detected OK\n"));
1935
1936         if (devc->model == MD_1848 && ad1847_flag)
1937                 devc->chip_name = "AD1847";
1938
1939
1940         if (sscape_flag == 1)
1941                 devc->model = MD_1845_SSCAPE;
1942
1943         return 1;
1944 }
1945
1946 int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback,
1947                 int dma_capture, int share_dma, int *osp, struct module *owner)
1948 {
1949         /*
1950          * NOTE! If irq < 0, there is another driver which has allocated the IRQ
1951          *   so that this driver doesn't need to allocate/deallocate it.
1952          *   The actually used IRQ is ABS(irq).
1953          */
1954
1955         int my_dev;
1956         char dev_name[100];
1957         int e;
1958
1959         ad1848_info  *devc = &adev_info[nr_ad1848_devs];
1960
1961         ad1848_port_info *portc = NULL;
1962
1963         devc->irq = (irq > 0) ? irq : 0;
1964         devc->open_mode = 0;
1965         devc->timer_ticks = 0;
1966         devc->dma1 = dma_playback;
1967         devc->dma2 = dma_capture;
1968         devc->subtype = cfg.card_subtype;
1969         devc->audio_flags = DMA_AUTOMODE;
1970         devc->playback_dev = devc->record_dev = 0;
1971         if (name != NULL)
1972                 devc->name = name;
1973
1974         if (name != NULL && name[0] != 0)
1975                 sprintf(dev_name,
1976                         "%s (%s)", name, devc->chip_name);
1977         else
1978                 sprintf(dev_name,
1979                         "Generic audio codec (%s)", devc->chip_name);
1980
1981         rename_region(ports, devc->name);
1982
1983         conf_printf2(dev_name, devc->base, devc->irq, dma_playback, dma_capture);
1984
1985         if (devc->model == MD_1848 || devc->model == MD_C930)
1986                 devc->audio_flags |= DMA_HARDSTOP;
1987
1988         if (devc->model > MD_1848)
1989         {
1990                 if (devc->dma1 == devc->dma2 || devc->dma2 == -1 || devc->dma1 == -1)
1991                         devc->audio_flags &= ~DMA_DUPLEX;
1992                 else
1993                         devc->audio_flags |= DMA_DUPLEX;
1994         }
1995
1996         portc = kmalloc(sizeof(ad1848_port_info), GFP_KERNEL);
1997         if(portc==NULL) {
1998                 release_region(devc->base, 4);
1999                 return -1;
2000         }
2001
2002         if ((my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
2003                                              dev_name,
2004                                              &ad1848_audio_driver,
2005                                              sizeof(struct audio_driver),
2006                                              devc->audio_flags,
2007                                              ad_format_mask[devc->model],
2008                                              devc,
2009                                              dma_playback,
2010                                              dma_capture)) < 0)
2011         {
2012                 release_region(devc->base, 4);
2013                 kfree(portc);
2014                 return -1;
2015         }
2016         
2017         audio_devs[my_dev]->portc = portc;
2018         audio_devs[my_dev]->mixer_dev = -1;
2019         if (owner)
2020                 audio_devs[my_dev]->d->owner = owner;
2021         memset((char *) portc, 0, sizeof(*portc));
2022
2023         nr_ad1848_devs++;
2024
2025         ad1848_init_hw(devc);
2026
2027         if (irq > 0)
2028         {
2029                 devc->dev_no = my_dev;
2030                 if (request_irq(devc->irq, adintr, 0, devc->name,
2031                                 (void *)(long)my_dev) < 0)
2032                 {
2033                         printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
2034                         /* Don't free it either then.. */
2035                         devc->irq = 0;
2036                 }
2037                 if (capabilities[devc->model].flags & CAP_F_TIMER)
2038                 {
2039 #ifndef CONFIG_SMP
2040                         int x;
2041                         unsigned char tmp = ad_read(devc, 16);
2042 #endif                  
2043
2044                         devc->timer_ticks = 0;
2045
2046                         ad_write(devc, 21, 0x00);       /* Timer MSB */
2047                         ad_write(devc, 20, 0x10);       /* Timer LSB */
2048 #ifndef CONFIG_SMP
2049                         ad_write(devc, 16, tmp | 0x40); /* Enable timer */
2050                         for (x = 0; x < 100000 && devc->timer_ticks == 0; x++);
2051                         ad_write(devc, 16, tmp & ~0x40);        /* Disable timer */
2052
2053                         if (devc->timer_ticks == 0)
2054                                 printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq);
2055                         else
2056                         {
2057                                 DDB(printk("Interrupt test OK\n"));
2058                                 devc->irq_ok = 1;
2059                         }
2060 #else
2061                         devc->irq_ok = 1;
2062 #endif                  
2063                 }
2064                 else
2065                         devc->irq_ok = 1;       /* Couldn't test. assume it's OK */
2066         } else if (irq < 0)
2067                 irq2dev[-irq] = devc->dev_no = my_dev;
2068
2069 #ifndef EXCLUDE_TIMERS
2070         if ((capabilities[devc->model].flags & CAP_F_TIMER) &&
2071             devc->irq_ok)
2072                 ad1848_tmr_install(my_dev);
2073 #endif
2074
2075         if (!share_dma)
2076         {
2077                 if (sound_alloc_dma(dma_playback, devc->name))
2078                         printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback);
2079
2080                 if (dma_capture != dma_playback)
2081                         if (sound_alloc_dma(dma_capture, devc->name))
2082                                 printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_capture);
2083         }
2084
2085         if ((e = sound_install_mixer(MIXER_DRIVER_VERSION,
2086                                      dev_name,
2087                                      &ad1848_mixer_operations,
2088                                      sizeof(struct mixer_operations),
2089                                      devc)) >= 0)
2090         {
2091                 audio_devs[my_dev]->mixer_dev = e;
2092                 if (owner)
2093                         mixer_devs[e]->owner = owner;
2094         }
2095         return my_dev;
2096 }
2097
2098 int ad1848_control(int cmd, int arg)
2099 {
2100         ad1848_info *devc;
2101         unsigned long flags;
2102
2103         if (nr_ad1848_devs < 1)
2104                 return -ENODEV;
2105
2106         devc = &adev_info[nr_ad1848_devs - 1];
2107
2108         switch (cmd)
2109         {
2110                 case AD1848_SET_XTAL:   /* Change clock frequency of AD1845 (only ) */
2111                         if (devc->model != MD_1845 && devc->model != MD_1845_SSCAPE)
2112                                 return -EINVAL;
2113                         spin_lock_irqsave(&devc->lock,flags);
2114                         ad_enter_MCE(devc);
2115                         ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5));
2116                         ad_leave_MCE(devc);
2117                         spin_unlock_irqrestore(&devc->lock,flags);
2118                         break;
2119
2120                 case AD1848_MIXER_REROUTE:
2121                 {
2122                         int o = (arg >> 8) & 0xff;
2123                         int n = arg & 0xff;
2124
2125                         if (o < 0 || o >= SOUND_MIXER_NRDEVICES)
2126                                 return -EINVAL;
2127
2128                         if (!(devc->supported_devices & (1 << o)) &&
2129                             !(devc->supported_rec_devices & (1 << o)))
2130                                 return -EINVAL;
2131
2132                         if (n == SOUND_MIXER_NONE)
2133                         {       /* Just hide this control */
2134                                 ad1848_mixer_set(devc, o, 0);   /* Shut up it */
2135                                 devc->supported_devices &= ~(1 << o);
2136                                 devc->supported_rec_devices &= ~(1 << o);
2137                                 break;
2138                         }
2139
2140                         /* Make the mixer control identified by o to appear as n */
2141                         if (n < 0 || n >= SOUND_MIXER_NRDEVICES)
2142                                 return -EINVAL;
2143
2144                         devc->mixer_reroute[n] = o;     /* Rename the control */
2145                         if (devc->supported_devices & (1 << o))
2146                                 devc->supported_devices |= (1 << n);
2147                         if (devc->supported_rec_devices & (1 << o))
2148                                 devc->supported_rec_devices |= (1 << n);
2149
2150                         devc->supported_devices &= ~(1 << o);
2151                         devc->supported_rec_devices &= ~(1 << o);
2152                 }
2153                 break;
2154         }
2155         return 0;
2156 }
2157
2158 void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int share_dma)
2159 {
2160         int i, mixer, dev = 0;
2161         ad1848_info *devc = NULL;
2162
2163         for (i = 0; devc == NULL && i < nr_ad1848_devs; i++)
2164         {
2165                 if (adev_info[i].base == io_base)
2166                 {
2167                         devc = &adev_info[i];
2168                         dev = devc->dev_no;
2169                 }
2170         }
2171                 
2172         if (devc != NULL)
2173         {
2174                 kfree(audio_devs[dev]->portc);
2175                 release_region(devc->base, 4);
2176
2177                 if (!share_dma)
2178                 {
2179                         if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
2180                                 free_irq(devc->irq, (void *)(long)devc->dev_no);
2181
2182                         sound_free_dma(dma_playback);
2183
2184                         if (dma_playback != dma_capture)
2185                                 sound_free_dma(dma_capture);
2186
2187                 }
2188                 mixer = audio_devs[devc->dev_no]->mixer_dev;
2189                 if(mixer>=0)
2190                         sound_unload_mixerdev(mixer);
2191
2192                 nr_ad1848_devs--;
2193                 for ( ; i < nr_ad1848_devs ; i++)
2194                         adev_info[i] = adev_info[i+1];
2195         }
2196         else
2197                 printk(KERN_ERR "ad1848: Can't find device to be unloaded. Base=%x\n", io_base);
2198 }
2199
2200 static irqreturn_t adintr(int irq, void *dev_id)
2201 {
2202         unsigned char status;
2203         ad1848_info *devc;
2204         int dev;
2205         int alt_stat = 0xff;
2206         unsigned char c930_stat = 0;
2207         int cnt = 0;
2208
2209         dev = (long)dev_id;
2210         devc = (ad1848_info *) audio_devs[dev]->devc;
2211
2212 interrupt_again:                /* Jump back here if int status doesn't reset */
2213
2214         status = inb(io_Status(devc));
2215
2216         if (status == 0x80)
2217                 printk(KERN_DEBUG "adintr: Why?\n");
2218         if (devc->model == MD_1848)
2219                 outb((0), io_Status(devc));     /* Clear interrupt status */
2220
2221         if (status & 0x01)
2222         {
2223                 if (devc->model == MD_C930)
2224                 {               /* 82C930 has interrupt status register in MAD16 register MC11 */
2225
2226                         spin_lock(&devc->lock);
2227
2228                         /* 0xe0e is C930 address port
2229                          * 0xe0f is C930 data port
2230                          */
2231                         outb(11, 0xe0e);
2232                         c930_stat = inb(0xe0f);
2233                         outb((~c930_stat), 0xe0f);
2234
2235                         spin_unlock(&devc->lock);
2236
2237                         alt_stat = (c930_stat << 2) & 0x30;
2238                 }
2239                 else if (devc->model != MD_1848)
2240                 {
2241                         spin_lock(&devc->lock);
2242                         alt_stat = ad_read(devc, 24);
2243                         ad_write(devc, 24, ad_read(devc, 24) & ~alt_stat);      /* Selective ack */
2244                         spin_unlock(&devc->lock);
2245                 }
2246
2247                 if ((devc->open_mode & OPEN_READ) && (devc->audio_mode & PCM_ENABLE_INPUT) && (alt_stat & 0x20))
2248                 {
2249                         DMAbuf_inputintr(devc->record_dev);
2250                 }
2251                 if ((devc->open_mode & OPEN_WRITE) && (devc->audio_mode & PCM_ENABLE_OUTPUT) &&
2252                       (alt_stat & 0x10))
2253                 {
2254                         DMAbuf_outputintr(devc->playback_dev, 1);
2255                 }
2256                 if (devc->model != MD_1848 && (alt_stat & 0x40))        /* Timer interrupt */
2257                 {
2258                         devc->timer_ticks++;
2259 #ifndef EXCLUDE_TIMERS
2260                         if (timer_installed == dev && devc->timer_running)
2261                                 sound_timer_interrupt();
2262 #endif
2263                 }
2264         }
2265 /*
2266  * Sometimes playback or capture interrupts occur while a timer interrupt
2267  * is being handled. The interrupt will not be retriggered if we don't
2268  * handle it now. Check if an interrupt is still pending and restart
2269  * the handler in this case.
2270  */
2271         if (inb(io_Status(devc)) & 0x01 && cnt++ < 4)
2272         {
2273                   goto interrupt_again;
2274         }
2275         return IRQ_HANDLED;
2276 }
2277
2278 /*
2279  *      Experimental initialization sequence for the integrated sound system
2280  *      of the Compaq Deskpro M.
2281  */
2282
2283 static int init_deskpro_m(struct address_info *hw_config)
2284 {
2285         unsigned char   tmp;
2286
2287         if ((tmp = inb(0xc44)) == 0xff)
2288         {
2289                 DDB(printk("init_deskpro_m: Dead port 0xc44\n"));
2290                 return 0;
2291         }
2292
2293         outb(0x10, 0xc44);
2294         outb(0x40, 0xc45);
2295         outb(0x00, 0xc46);
2296         outb(0xe8, 0xc47);
2297         outb(0x14, 0xc44);
2298         outb(0x40, 0xc45);
2299         outb(0x00, 0xc46);
2300         outb(0xe8, 0xc47);
2301         outb(0x10, 0xc44);
2302
2303         return 1;
2304 }
2305
2306 /*
2307  *      Experimental initialization sequence for the integrated sound system
2308  *      of Compaq Deskpro XL.
2309  */
2310
2311 static int init_deskpro(struct address_info *hw_config)
2312 {
2313         unsigned char   tmp;
2314
2315         if ((tmp = inb(0xc44)) == 0xff)
2316         {
2317                 DDB(printk("init_deskpro: Dead port 0xc44\n"));
2318                 return 0;
2319         }
2320         outb((tmp | 0x04), 0xc44);      /* Select bank 1 */
2321         if (inb(0xc44) != 0x04)
2322         {
2323                 DDB(printk("init_deskpro: Invalid bank1 signature in port 0xc44\n"));
2324                 return 0;
2325         }
2326         /*
2327          * OK. It looks like a Deskpro so let's proceed.
2328          */
2329
2330         /*
2331          * I/O port 0xc44 Audio configuration register.
2332          *
2333          * bits 0xc0:   Audio revision bits
2334          *              0x00 = Compaq Business Audio
2335          *              0x40 = MS Sound System Compatible (reset default)
2336          *              0x80 = Reserved
2337          *              0xc0 = Reserved
2338          * bit 0x20:    No Wait State Enable
2339          *              0x00 = Disabled (reset default, DMA mode)
2340          *              0x20 = Enabled (programmed I/O mode)
2341          * bit 0x10:    MS Sound System Decode Enable
2342          *              0x00 = Decoding disabled (reset default)
2343          *              0x10 = Decoding enabled
2344          * bit 0x08:    FM Synthesis Decode Enable
2345          *              0x00 = Decoding Disabled (reset default)
2346          *              0x08 = Decoding enabled
2347          * bit 0x04     Bank select
2348          *              0x00 = Bank 0
2349          *              0x04 = Bank 1
2350          * bits 0x03    MSS Base address
2351          *              0x00 = 0x530 (reset default)
2352          *              0x01 = 0x604
2353          *              0x02 = 0xf40
2354          *              0x03 = 0xe80
2355          */
2356
2357 #ifdef DEBUGXL
2358         /* Debug printing */
2359         printk("Port 0xc44 (before): ");
2360         outb((tmp & ~0x04), 0xc44);
2361         printk("%02x ", inb(0xc44));
2362         outb((tmp | 0x04), 0xc44);
2363         printk("%02x\n", inb(0xc44));
2364 #endif
2365
2366         /* Set bank 1 of the register */
2367         tmp = 0x58;             /* MSS Mode, MSS&FM decode enabled */
2368
2369         switch (hw_config->io_base)
2370         {
2371                 case 0x530:
2372                         tmp |= 0x00;
2373                         break;
2374                 case 0x604:
2375                         tmp |= 0x01;
2376                         break;
2377                 case 0xf40:
2378                         tmp |= 0x02;
2379                         break;
2380                 case 0xe80:
2381                         tmp |= 0x03;
2382                         break;
2383                 default:
2384                         DDB(printk("init_deskpro: Invalid MSS port %x\n", hw_config->io_base));
2385                         return 0;
2386         }
2387         outb((tmp & ~0x04), 0xc44);     /* Write to bank=0 */
2388
2389 #ifdef DEBUGXL
2390         /* Debug printing */
2391         printk("Port 0xc44 (after): ");
2392         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2393         printk("%02x ", inb(0xc44));
2394         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2395         printk("%02x\n", inb(0xc44));
2396 #endif
2397
2398         /*
2399          * I/O port 0xc45 FM Address Decode/MSS ID Register.
2400          *
2401          * bank=0, bits 0xfe:   FM synthesis Decode Compare bits 7:1 (default=0x88)
2402          * bank=0, bit 0x01:    SBIC Power Control Bit
2403          *                      0x00 = Powered up
2404          *                      0x01 = Powered down
2405          * bank=1, bits 0xfc:   MSS ID (default=0x40)
2406          */
2407
2408 #ifdef DEBUGXL
2409         /* Debug printing */
2410         printk("Port 0xc45 (before): ");
2411         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2412         printk("%02x ", inb(0xc45));
2413         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2414         printk("%02x\n", inb(0xc45));
2415 #endif
2416
2417         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2418         outb((0x88), 0xc45);    /* FM base 7:0 = 0x88 */
2419         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2420         outb((0x10), 0xc45);    /* MSS ID = 0x10 (MSS port returns 0x04) */
2421
2422 #ifdef DEBUGXL
2423         /* Debug printing */
2424         printk("Port 0xc45 (after): ");
2425         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2426         printk("%02x ", inb(0xc45));
2427         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2428         printk("%02x\n", inb(0xc45));
2429 #endif
2430
2431
2432         /*
2433          * I/O port 0xc46 FM Address Decode/Address ASIC Revision Register.
2434          *
2435          * bank=0, bits 0xff:   FM synthesis Decode Compare bits 15:8 (default=0x03)
2436          * bank=1, bits 0xff:   Audio addressing ASIC id
2437          */
2438
2439 #ifdef DEBUGXL
2440         /* Debug printing */
2441         printk("Port 0xc46 (before): ");
2442         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2443         printk("%02x ", inb(0xc46));
2444         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2445         printk("%02x\n", inb(0xc46));
2446 #endif
2447
2448         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2449         outb((0x03), 0xc46);    /* FM base 15:8 = 0x03 */
2450         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2451         outb((0x11), 0xc46);    /* ASIC ID = 0x11 */
2452
2453 #ifdef DEBUGXL
2454         /* Debug printing */
2455         printk("Port 0xc46 (after): ");
2456         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2457         printk("%02x ", inb(0xc46));
2458         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2459         printk("%02x\n", inb(0xc46));
2460 #endif
2461
2462         /*
2463          * I/O port 0xc47 FM Address Decode Register.
2464          *
2465          * bank=0, bits 0xff:   Decode enable selection for various FM address bits
2466          * bank=1, bits 0xff:   Reserved
2467          */
2468
2469 #ifdef DEBUGXL
2470         /* Debug printing */
2471         printk("Port 0xc47 (before): ");
2472         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2473         printk("%02x ", inb(0xc47));
2474         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2475         printk("%02x\n", inb(0xc47));
2476 #endif
2477
2478         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2479         outb((0x7c), 0xc47);    /* FM decode enable bits = 0x7c */
2480         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2481         outb((0x00), 0xc47);    /* Reserved bank1 = 0x00 */
2482
2483 #ifdef DEBUGXL
2484         /* Debug printing */
2485         printk("Port 0xc47 (after): ");
2486         outb((tmp & ~0x04), 0xc44);     /* Select bank=0 */
2487         printk("%02x ", inb(0xc47));
2488         outb((tmp | 0x04), 0xc44);      /* Select bank=1 */
2489         printk("%02x\n", inb(0xc47));
2490 #endif
2491
2492         /*
2493          * I/O port 0xc6f = Audio Disable Function Register
2494          */
2495
2496 #ifdef DEBUGXL
2497         printk("Port 0xc6f (before) = %02x\n", inb(0xc6f));
2498 #endif
2499
2500         outb((0x80), 0xc6f);
2501
2502 #ifdef DEBUGXL
2503         printk("Port 0xc6f (after) = %02x\n", inb(0xc6f));
2504 #endif
2505
2506         return 1;
2507 }
2508
2509 int probe_ms_sound(struct address_info *hw_config, struct resource *ports)
2510 {
2511         unsigned char   tmp;
2512
2513         DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype));
2514
2515         if (hw_config->card_subtype == 1)       /* Has no IRQ/DMA registers */
2516         {
2517                 /* check_opl3(0x388, hw_config); */
2518                 return ad1848_detect(ports, NULL, hw_config->osp);
2519         }
2520
2521         if (deskpro_xl && hw_config->card_subtype == 2) /* Compaq Deskpro XL */
2522         {
2523                 if (!init_deskpro(hw_config))
2524                         return 0;
2525         }
2526
2527         if (deskpro_m)  /* Compaq Deskpro M */
2528         {
2529                 if (!init_deskpro_m(hw_config))
2530                         return 0;
2531         }
2532
2533         /*
2534            * Check if the IO port returns valid signature. The original MS Sound
2535            * system returns 0x04 while some cards (AudioTrix Pro for example)
2536            * return 0x00 or 0x0f.
2537          */
2538
2539         if ((tmp = inb(hw_config->io_base + 3)) == 0xff)        /* Bus float */
2540         {
2541                   int             ret;
2542
2543                   DDB(printk("I/O address is inactive (%x)\n", tmp));
2544                   if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
2545                           return 0;
2546                   return 1;
2547         }
2548         DDB(printk("MSS signature = %x\n", tmp & 0x3f));
2549         if ((tmp & 0x3f) != 0x04 &&
2550             (tmp & 0x3f) != 0x0f &&
2551             (tmp & 0x3f) != 0x00)
2552         {
2553                 int ret;
2554
2555                 MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, (int) inb(hw_config->io_base + 3)));
2556                 DDB(printk("Trying to detect codec anyway but IRQ/DMA may not work\n"));
2557                 if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
2558                         return 0;
2559
2560                 hw_config->card_subtype = 1;
2561                 return 1;
2562         }
2563         if ((hw_config->irq != 5)  &&
2564             (hw_config->irq != 7)  &&
2565             (hw_config->irq != 9)  &&
2566             (hw_config->irq != 10) &&
2567             (hw_config->irq != 11) &&
2568             (hw_config->irq != 12))
2569         {
2570                 printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
2571                 return 0;
2572         }
2573         if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3)
2574         {
2575                   printk(KERN_ERR "MSS: Bad DMA %d\n", hw_config->dma);
2576                   return 0;
2577         }
2578         /*
2579          * Check that DMA0 is not in use with a 8 bit board.
2580          */
2581
2582         if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80)
2583         {
2584                 printk(KERN_ERR "MSS: Can't use DMA0 with a 8 bit card/slot\n");
2585                 return 0;
2586         }
2587         if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80)
2588         {
2589                 printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
2590                 return 0;
2591         }
2592         return ad1848_detect(ports, NULL, hw_config->osp);
2593 }
2594
2595 void attach_ms_sound(struct address_info *hw_config, struct resource *ports, struct module *owner)
2596 {
2597         static signed char interrupt_bits[12] =
2598         {
2599                 -1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20
2600         };
2601         signed char     bits;
2602         char            dma2_bit = 0;
2603
2604         static char     dma_bits[4] =
2605         {
2606                 1, 2, 0, 3
2607         };
2608
2609         int config_port = hw_config->io_base + 0;
2610         int version_port = hw_config->io_base + 3;
2611         int dma = hw_config->dma;
2612         int dma2 = hw_config->dma2;
2613
2614         if (hw_config->card_subtype == 1)       /* Has no IRQ/DMA registers */
2615         {
2616                 hw_config->slots[0] = ad1848_init("MS Sound System", ports,
2617                                                     hw_config->irq,
2618                                                     hw_config->dma,
2619                                                     hw_config->dma2, 0, 
2620                                                     hw_config->osp,
2621                                                     owner);
2622                 return;
2623         }
2624         /*
2625          * Set the IRQ and DMA addresses.
2626          */
2627
2628         bits = interrupt_bits[hw_config->irq];
2629         if (bits == -1)
2630         {
2631                 printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
2632                 release_region(ports->start, 4);
2633                 release_region(ports->start - 4, 4);
2634                 return;
2635         }
2636         outb((bits | 0x40), config_port);
2637         if ((inb(version_port) & 0x40) == 0)
2638                 printk(KERN_ERR "[MSS: IRQ Conflict?]\n");
2639
2640 /*
2641  * Handle the capture DMA channel
2642  */
2643
2644         if (dma2 != -1 && dma2 != dma)
2645         {
2646                 if (!((dma == 0 && dma2 == 1) ||
2647                         (dma == 1 && dma2 == 0) ||
2648                         (dma == 3 && dma2 == 0)))
2649                 {       /* Unsupported combination. Try to swap channels */
2650                         int tmp = dma;
2651
2652                         dma = dma2;
2653                         dma2 = tmp;
2654                 }
2655                 if ((dma == 0 && dma2 == 1) ||
2656                         (dma == 1 && dma2 == 0) ||
2657                         (dma == 3 && dma2 == 0))
2658                 {
2659                         dma2_bit = 0x04;        /* Enable capture DMA */
2660                 }
2661                 else
2662                 {
2663                         printk(KERN_WARNING "MSS: Invalid capture DMA\n");
2664                         dma2 = dma;
2665                 }
2666         }
2667         else
2668         {
2669                 dma2 = dma;
2670         }
2671
2672         hw_config->dma = dma;
2673         hw_config->dma2 = dma2;
2674
2675         outb((bits | dma_bits[dma] | dma2_bit), config_port);   /* Write IRQ+DMA setup */
2676
2677         hw_config->slots[0] = ad1848_init("MS Sound System", ports,
2678                                           hw_config->irq,
2679                                           dma, dma2, 0,
2680                                           hw_config->osp,
2681                                           THIS_MODULE);
2682 }
2683
2684 void unload_ms_sound(struct address_info *hw_config)
2685 {
2686         ad1848_unload(hw_config->io_base + 4,
2687                       hw_config->irq,
2688                       hw_config->dma,
2689                       hw_config->dma2, 0);
2690         sound_unload_audiodev(hw_config->slots[0]);
2691         release_region(hw_config->io_base, 4);
2692 }
2693
2694 #ifndef EXCLUDE_TIMERS
2695
2696 /*
2697  * Timer stuff (for /dev/music).
2698  */
2699
2700 static unsigned int current_interval;
2701
2702 static unsigned int ad1848_tmr_start(int dev, unsigned int usecs)
2703 {
2704         unsigned long   flags;
2705         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
2706         unsigned long   xtal_nsecs;     /* nanoseconds per xtal oscillator tick */
2707         unsigned long   divider;
2708
2709         spin_lock_irqsave(&devc->lock,flags);
2710
2711         /*
2712          * Length of the timer interval (in nanoseconds) depends on the
2713          * selected crystal oscillator. Check this from bit 0x01 of I8.
2714          *
2715          * AD1845 has just one oscillator which has cycle time of 10.050 us
2716          * (when a 24.576 MHz xtal oscillator is used).
2717          *
2718          * Convert requested interval to nanoseconds before computing
2719          * the timer divider.
2720          */
2721
2722         if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
2723                 xtal_nsecs = 10050;
2724         else if (ad_read(devc, 8) & 0x01)
2725                 xtal_nsecs = 9920;
2726         else
2727                 xtal_nsecs = 9969;
2728
2729         divider = (usecs * 1000 + xtal_nsecs / 2) / xtal_nsecs;
2730
2731         if (divider < 100)      /* Don't allow shorter intervals than about 1ms */
2732                 divider = 100;
2733
2734         if (divider > 65535)    /* Overflow check */
2735                 divider = 65535;
2736
2737         ad_write(devc, 21, (divider >> 8) & 0xff);      /* Set upper bits */
2738         ad_write(devc, 20, divider & 0xff);     /* Set lower bits */
2739         ad_write(devc, 16, ad_read(devc, 16) | 0x40);   /* Start the timer */
2740         devc->timer_running = 1;
2741         spin_unlock_irqrestore(&devc->lock,flags);
2742
2743         return current_interval = (divider * xtal_nsecs + 500) / 1000;
2744 }
2745
2746 static void ad1848_tmr_reprogram(int dev)
2747 {
2748         /*
2749          *    Audio driver has changed sampling rate so that a different xtal
2750          *      oscillator was selected. We have to reprogram the timer rate.
2751          */
2752
2753         ad1848_tmr_start(dev, current_interval);
2754         sound_timer_syncinterval(current_interval);
2755 }
2756
2757 static void ad1848_tmr_disable(int dev)
2758 {
2759         unsigned long   flags;
2760         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
2761
2762         spin_lock_irqsave(&devc->lock,flags);
2763         ad_write(devc, 16, ad_read(devc, 16) & ~0x40);
2764         devc->timer_running = 0;
2765         spin_unlock_irqrestore(&devc->lock,flags);
2766 }
2767
2768 static void ad1848_tmr_restart(int dev)
2769 {
2770         unsigned long   flags;
2771         ad1848_info    *devc = (ad1848_info *) audio_devs[dev]->devc;
2772
2773         if (current_interval == 0)
2774                 return;
2775
2776         spin_lock_irqsave(&devc->lock,flags);
2777         ad_write(devc, 16, ad_read(devc, 16) | 0x40);
2778         devc->timer_running = 1;
2779         spin_unlock_irqrestore(&devc->lock,flags);
2780 }
2781
2782 static struct sound_lowlev_timer ad1848_tmr =
2783 {
2784         0,
2785         2,
2786         ad1848_tmr_start,
2787         ad1848_tmr_disable,
2788         ad1848_tmr_restart
2789 };
2790
2791 static int ad1848_tmr_install(int dev)
2792 {
2793         if (timer_installed != -1)
2794                 return 0;       /* Don't install another timer */
2795
2796         timer_installed = ad1848_tmr.dev = dev;
2797         sound_timer_init(&ad1848_tmr, audio_devs[dev]->name);
2798
2799         return 1;
2800 }
2801 #endif /* EXCLUDE_TIMERS */
2802
2803 EXPORT_SYMBOL(ad1848_detect);
2804 EXPORT_SYMBOL(ad1848_init);
2805 EXPORT_SYMBOL(ad1848_unload);
2806 EXPORT_SYMBOL(ad1848_control);
2807 EXPORT_SYMBOL(probe_ms_sound);
2808 EXPORT_SYMBOL(attach_ms_sound);
2809 EXPORT_SYMBOL(unload_ms_sound);
2810
2811 static int __initdata io = -1;
2812 static int __initdata irq = -1;
2813 static int __initdata dma = -1;
2814 static int __initdata dma2 = -1;
2815 static int __initdata type = 0;
2816
2817 module_param(io, int, 0);               /* I/O for a raw AD1848 card */
2818 module_param(irq, int, 0);              /* IRQ to use */
2819 module_param(dma, int, 0);              /* First DMA channel */
2820 module_param(dma2, int, 0);             /* Second DMA channel */
2821 module_param(type, int, 0);             /* Card type */
2822 module_param(deskpro_xl, bool, 0);      /* Special magic for Deskpro XL boxen */
2823 module_param(deskpro_m, bool, 0);       /* Special magic for Deskpro M box */
2824 module_param(soundpro, bool, 0);        /* More special magic for SoundPro chips */
2825
2826 #ifdef CONFIG_PNP
2827 module_param(isapnp, int, 0);
2828 module_param(isapnpjump, int, 0);
2829 module_param(reverse, bool, 0);
2830 MODULE_PARM_DESC(isapnp,        "When set to 0, Plug & Play support will be disabled");
2831 MODULE_PARM_DESC(isapnpjump,    "Jumps to a specific slot in the driver's PnP table. Use the source, Luke.");
2832 MODULE_PARM_DESC(reverse,       "When set to 1, will reverse ISAPnP search order");
2833
2834 static struct pnp_dev   *ad1848_dev  = NULL;
2835
2836 /* Please add new entries at the end of the table */
2837 static struct {
2838         char *name;
2839         unsigned short  card_vendor, card_device,
2840                         vendor, function;
2841         short mss_io, irq, dma, dma2;   /* index into isapnp table */
2842         int type;
2843 } ad1848_isapnp_list[] __initdata = {
2844         {"CMI 8330 SoundPRO",
2845                 ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
2846                 ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001),
2847                 0, 0, 0,-1, 0},
2848         {"CS4232 based card",
2849                 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2850                 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000),
2851                 0, 0, 0, 1, 0},
2852         {"CS4232 based card",
2853                 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2854                 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100),
2855                 0, 0, 0, 1, 0},
2856         {"OPL3-SA2 WSS mode",
2857                 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2858                 ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021),
2859                 1, 0, 0, 1, 1},
2860         {"Advanced Gravis InterWave Audio",
2861                 ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
2862                 ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000),
2863                 0, 0, 0, 1, 0},
2864         {NULL}
2865 };
2866
2867 static struct isapnp_device_id id_table[] __devinitdata = {
2868         {       ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
2869                 ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 },
2870         {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2871                 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 },
2872         {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2873                 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 },
2874         /* The main driver for this card is opl3sa2
2875         {       ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2876                 ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 },
2877         */
2878         {       ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
2879                 ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 },
2880         {0}
2881 };
2882
2883 MODULE_DEVICE_TABLE(isapnp, id_table);
2884
2885 static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev)
2886 {
2887         int err;
2888
2889         err = pnp_device_attach(dev);
2890         if (err < 0)
2891                 return(NULL);
2892
2893         if((err = pnp_activate_dev(dev)) < 0) {
2894                 printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err);
2895
2896                 pnp_device_detach(dev);
2897
2898                 return(NULL);
2899         }
2900         audio_activated = 1;
2901         return(dev);
2902 }
2903
2904 static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
2905                                 struct address_info *hw_config, int slot)
2906 {
2907
2908         /* Configure Audio device */
2909         if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL)))
2910         {
2911                 if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev)))
2912                 {
2913                         hw_config->io_base      = pnp_port_start(ad1848_dev, ad1848_isapnp_list[slot].mss_io);
2914                         hw_config->irq          = pnp_irq(ad1848_dev, ad1848_isapnp_list[slot].irq);
2915                         hw_config->dma          = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma);
2916                         if(ad1848_isapnp_list[slot].dma2 != -1)
2917                                 hw_config->dma2 = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma2);
2918                         else
2919                                 hw_config->dma2 = -1;
2920                         hw_config->card_subtype = ad1848_isapnp_list[slot].type;
2921                 } else
2922                         return(NULL);
2923         } else
2924                 return(NULL);
2925
2926         return(ad1848_dev);
2927 }
2928
2929 static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot)
2930 {
2931         char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name;
2932
2933         /* Initialize this baby. */
2934
2935         if(ad1848_init_generic(bus, hw_config, slot)) {
2936                 /* We got it. */
2937
2938                 printk(KERN_NOTICE "ad1848: PnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n",
2939                        busname,
2940                        hw_config->io_base, hw_config->irq, hw_config->dma,
2941                        hw_config->dma2);
2942                 return 1;
2943         }
2944         return 0;
2945 }
2946
2947 static int __init ad1848_isapnp_probe(struct address_info *hw_config)
2948 {
2949         static int first = 1;
2950         int i;
2951
2952         /* Count entries in sb_isapnp_list */
2953         for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++);
2954         i--;
2955
2956         /* Check and adjust isapnpjump */
2957         if( isapnpjump < 0 || isapnpjump > i) {
2958                 isapnpjump = reverse ? i : 0;
2959                 printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump);
2960         }
2961
2962         if(!first || !reverse)
2963                 i = isapnpjump;
2964         first = 0;
2965         while(ad1848_isapnp_list[i].card_vendor != 0) {
2966                 static struct pnp_card *bus = NULL;
2967
2968                 while ((bus = pnp_find_card(
2969                                 ad1848_isapnp_list[i].card_vendor,
2970                                 ad1848_isapnp_list[i].card_device,
2971                                 bus))) {
2972
2973                         if(ad1848_isapnp_init(hw_config, bus, i)) {
2974                                 isapnpjump = i; /* start next search from here */
2975                                 return 0;
2976                         }
2977                 }
2978                 i += reverse ? -1 : 1;
2979         }
2980
2981         return -ENODEV;
2982 }
2983 #endif
2984
2985
2986 static int __init init_ad1848(void)
2987 {
2988         printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n");
2989
2990 #ifdef CONFIG_PNP
2991         if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) {
2992                 printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n");
2993                 isapnp = 0;
2994         }
2995 #endif
2996
2997         if(io != -1) {
2998                 struct resource *ports;
2999                 if( isapnp == 0 )
3000                 {
3001                         if(irq == -1 || dma == -1) {
3002                                 printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n");
3003                                 return -EINVAL;
3004                         }
3005
3006                         cfg.irq = irq;
3007                         cfg.io_base = io;
3008                         cfg.dma = dma;
3009                         cfg.dma2 = dma2;
3010                         cfg.card_subtype = type;
3011                 }
3012
3013                 ports = request_region(io + 4, 4, "ad1848");
3014
3015                 if (!ports)
3016                         return -EBUSY;
3017
3018                 if (!request_region(io, 4, "WSS config")) {
3019                         release_region(io + 4, 4);
3020                         return -EBUSY;
3021                 }
3022
3023                 if (!probe_ms_sound(&cfg, ports)) {
3024                         release_region(io + 4, 4);
3025                         release_region(io, 4);
3026                         return -ENODEV;
3027                 }
3028                 attach_ms_sound(&cfg, ports, THIS_MODULE);
3029                 loaded = 1;
3030         }
3031         return 0;
3032 }
3033
3034 static void __exit cleanup_ad1848(void)
3035 {
3036         if(loaded)
3037                 unload_ms_sound(&cfg);
3038
3039 #ifdef CONFIG_PNP
3040         if(ad1848_dev){
3041                 if(audio_activated)
3042                         pnp_device_detach(ad1848_dev);
3043         }
3044 #endif
3045 }
3046
3047 module_init(init_ad1848);
3048 module_exit(cleanup_ad1848);
3049
3050 #ifndef MODULE
3051 static int __init setup_ad1848(char *str)
3052 {
3053         /* io, irq, dma, dma2, type */
3054         int ints[6];
3055         
3056         str = get_options(str, ARRAY_SIZE(ints), ints);
3057
3058         io      = ints[1];
3059         irq     = ints[2];
3060         dma     = ints[3];
3061         dma2    = ints[4];
3062         type    = ints[5];
3063
3064         return 1;
3065 }
3066
3067 __setup("ad1848=", setup_ad1848);       
3068 #endif
3069 MODULE_LICENSE("GPL");