mac80211: fix scan cancel on ifdown
[linux-2.6.git] / net / mac80211 / scan.c
1 /*
2  * Scanning implementation
3  *
4  * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
5  * Copyright 2004, Instant802 Networks, Inc.
6  * Copyright 2005, Devicescape Software, Inc.
7  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
8  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14
15 /* TODO: figure out how to avoid that the "current BSS" expires */
16
17 #include <linux/wireless.h>
18 #include <linux/if_arp.h>
19 #include <linux/rtnetlink.h>
20 #include <net/mac80211.h>
21
22 #include "ieee80211_i.h"
23 #include "driver-ops.h"
24 #include "mesh.h"
25
26 #define IEEE80211_PROBE_DELAY (HZ / 33)
27 #define IEEE80211_CHANNEL_TIME (HZ / 33)
28 #define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 8)
29
30 struct ieee80211_bss *
31 ieee80211_rx_bss_get(struct ieee80211_local *local, u8 *bssid, int freq,
32                      u8 *ssid, u8 ssid_len)
33 {
34         return (void *)cfg80211_get_bss(local->hw.wiphy,
35                                         ieee80211_get_channel(local->hw.wiphy,
36                                                               freq),
37                                         bssid, ssid, ssid_len,
38                                         0, 0);
39 }
40
41 static void ieee80211_rx_bss_free(struct cfg80211_bss *cbss)
42 {
43         struct ieee80211_bss *bss = (void *)cbss;
44
45         kfree(bss_mesh_id(bss));
46         kfree(bss_mesh_cfg(bss));
47 }
48
49 void ieee80211_rx_bss_put(struct ieee80211_local *local,
50                           struct ieee80211_bss *bss)
51 {
52         cfg80211_put_bss((struct cfg80211_bss *)bss);
53 }
54
55 struct ieee80211_bss *
56 ieee80211_bss_info_update(struct ieee80211_local *local,
57                           struct ieee80211_rx_status *rx_status,
58                           struct ieee80211_mgmt *mgmt,
59                           size_t len,
60                           struct ieee802_11_elems *elems,
61                           struct ieee80211_channel *channel,
62                           bool beacon)
63 {
64         struct ieee80211_bss *bss;
65         int clen;
66         s32 signal = 0;
67
68         if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
69                 signal = rx_status->signal * 100;
70         else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
71                 signal = (rx_status->signal * 100) / local->hw.max_signal;
72
73         bss = (void *)cfg80211_inform_bss_frame(local->hw.wiphy, channel,
74                                                 mgmt, len, signal, GFP_ATOMIC);
75
76         if (!bss)
77                 return NULL;
78
79         bss->cbss.free_priv = ieee80211_rx_bss_free;
80
81         /* save the ERP value so that it is available at association time */
82         if (elems->erp_info && elems->erp_info_len >= 1) {
83                 bss->erp_value = elems->erp_info[0];
84                 bss->has_erp_value = 1;
85         }
86
87         if (elems->tim) {
88                 struct ieee80211_tim_ie *tim_ie =
89                         (struct ieee80211_tim_ie *)elems->tim;
90                 bss->dtim_period = tim_ie->dtim_period;
91         }
92
93         /* set default value for buggy APs */
94         if (!elems->tim || bss->dtim_period == 0)
95                 bss->dtim_period = 1;
96
97         bss->supp_rates_len = 0;
98         if (elems->supp_rates) {
99                 clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
100                 if (clen > elems->supp_rates_len)
101                         clen = elems->supp_rates_len;
102                 memcpy(&bss->supp_rates[bss->supp_rates_len], elems->supp_rates,
103                        clen);
104                 bss->supp_rates_len += clen;
105         }
106         if (elems->ext_supp_rates) {
107                 clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len;
108                 if (clen > elems->ext_supp_rates_len)
109                         clen = elems->ext_supp_rates_len;
110                 memcpy(&bss->supp_rates[bss->supp_rates_len],
111                        elems->ext_supp_rates, clen);
112                 bss->supp_rates_len += clen;
113         }
114
115         bss->wmm_used = elems->wmm_param || elems->wmm_info;
116
117         if (!beacon)
118                 bss->last_probe_resp = jiffies;
119
120         return bss;
121 }
122
123 ieee80211_rx_result
124 ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
125 {
126         struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
127         struct ieee80211_mgmt *mgmt;
128         struct ieee80211_bss *bss;
129         u8 *elements;
130         struct ieee80211_channel *channel;
131         size_t baselen;
132         int freq;
133         __le16 fc;
134         bool presp, beacon = false;
135         struct ieee802_11_elems elems;
136
137         if (skb->len < 2)
138                 return RX_DROP_UNUSABLE;
139
140         mgmt = (struct ieee80211_mgmt *) skb->data;
141         fc = mgmt->frame_control;
142
143         if (ieee80211_is_ctl(fc))
144                 return RX_CONTINUE;
145
146         if (skb->len < 24)
147                 return RX_DROP_MONITOR;
148
149         presp = ieee80211_is_probe_resp(fc);
150         if (presp) {
151                 /* ignore ProbeResp to foreign address */
152                 if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
153                         return RX_DROP_MONITOR;
154
155                 presp = true;
156                 elements = mgmt->u.probe_resp.variable;
157                 baselen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
158         } else {
159                 beacon = ieee80211_is_beacon(fc);
160                 baselen = offsetof(struct ieee80211_mgmt, u.beacon.variable);
161                 elements = mgmt->u.beacon.variable;
162         }
163
164         if (!presp && !beacon)
165                 return RX_CONTINUE;
166
167         if (baselen > skb->len)
168                 return RX_DROP_MONITOR;
169
170         ieee802_11_parse_elems(elements, skb->len - baselen, &elems);
171
172         if (elems.ds_params && elems.ds_params_len == 1)
173                 freq = ieee80211_channel_to_frequency(elems.ds_params[0]);
174         else
175                 freq = rx_status->freq;
176
177         channel = ieee80211_get_channel(sdata->local->hw.wiphy, freq);
178
179         if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
180                 return RX_DROP_MONITOR;
181
182         bss = ieee80211_bss_info_update(sdata->local, rx_status,
183                                         mgmt, skb->len, &elems,
184                                         channel, beacon);
185         if (bss)
186                 ieee80211_rx_bss_put(sdata->local, bss);
187
188         dev_kfree_skb(skb);
189         return RX_QUEUED;
190 }
191
192 /*
193  * inform AP that we will go to sleep so that it will buffer the frames
194  * while we scan
195  */
196 static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
197 {
198         struct ieee80211_local *local = sdata->local;
199         bool ps = false;
200
201         /* FIXME: what to do when local->pspolling is true? */
202
203         del_timer_sync(&local->dynamic_ps_timer);
204         cancel_work_sync(&local->dynamic_ps_enable_work);
205
206         if (local->hw.conf.flags & IEEE80211_CONF_PS) {
207                 ps = true;
208                 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
209                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
210         }
211
212         if (!ps || !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
213                 /*
214                  * If power save was enabled, no need to send a nullfunc
215                  * frame because AP knows that we are sleeping. But if the
216                  * hardware is creating the nullfunc frame for power save
217                  * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not
218                  * enabled) and power save was enabled, the firmware just
219                  * sent a null frame with power save disabled. So we need
220                  * to send a new nullfunc frame to inform the AP that we
221                  * are again sleeping.
222                  */
223                 ieee80211_send_nullfunc(local, sdata, 1);
224 }
225
226 /* inform AP that we are awake again, unless power save is enabled */
227 static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
228 {
229         struct ieee80211_local *local = sdata->local;
230
231         if (!local->ps_sdata)
232                 ieee80211_send_nullfunc(local, sdata, 0);
233         else {
234                 /*
235                  * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware
236                  * will send a nullfunc frame with the powersave bit set
237                  * even though the AP already knows that we are sleeping.
238                  * This could be avoided by sending a null frame with power
239                  * save bit disabled before enabling the power save, but
240                  * this doesn't gain anything.
241                  *
242                  * When IEEE80211_HW_PS_NULLFUNC_STACK is enabled, no need
243                  * to send a nullfunc frame because AP already knows that
244                  * we are sleeping, let's just enable power save mode in
245                  * hardware.
246                  */
247                 local->hw.conf.flags |= IEEE80211_CONF_PS;
248                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
249         }
250 }
251
252 static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
253 {
254         kfree(local->scan_req->ie);
255         local->scan_req->ie = local->orig_ies;
256         local->scan_req->ie_len = local->orig_ies_len;
257 }
258
259 void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
260 {
261         struct ieee80211_local *local = hw_to_local(hw);
262         struct ieee80211_sub_if_data *sdata;
263         bool was_hw_scan;
264
265         mutex_lock(&local->scan_mtx);
266
267         if (WARN_ON(!local->scanning)) {
268                 mutex_unlock(&local->scan_mtx);
269                 return;
270         }
271
272         if (WARN_ON(!local->scan_req)) {
273                 mutex_unlock(&local->scan_mtx);
274                 return;
275         }
276
277         if (test_bit(SCAN_HW_SCANNING, &local->scanning))
278                 ieee80211_restore_scan_ies(local);
279
280         if (local->scan_req != local->int_scan_req)
281                 cfg80211_scan_done(local->scan_req, aborted);
282         local->scan_req = NULL;
283         local->scan_sdata = NULL;
284
285         was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
286         local->scanning = 0;
287         local->scan_channel = NULL;
288
289         /* we only have to protect scan_req and hw/sw scan */
290         mutex_unlock(&local->scan_mtx);
291
292         ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
293         if (was_hw_scan)
294                 goto done;
295
296         ieee80211_configure_filter(local);
297
298         drv_sw_scan_complete(local);
299
300         mutex_lock(&local->iflist_mtx);
301         list_for_each_entry(sdata, &local->interfaces, list) {
302                 if (!netif_running(sdata->dev))
303                         continue;
304
305                 /* Tell AP we're back */
306                 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
307                         if (sdata->u.mgd.associated) {
308                                 ieee80211_scan_ps_disable(sdata);
309                                 netif_tx_wake_all_queues(sdata->dev);
310                         }
311                 } else
312                         netif_tx_wake_all_queues(sdata->dev);
313
314                 /* re-enable beaconing */
315                 if (sdata->vif.type == NL80211_IFTYPE_AP ||
316                     sdata->vif.type == NL80211_IFTYPE_ADHOC ||
317                     sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
318                         ieee80211_bss_info_change_notify(
319                                 sdata, BSS_CHANGED_BEACON_ENABLED);
320         }
321         mutex_unlock(&local->iflist_mtx);
322
323  done:
324         ieee80211_recalc_idle(local);
325         ieee80211_mlme_notify_scan_completed(local);
326         ieee80211_ibss_notify_scan_completed(local);
327         ieee80211_mesh_notify_scan_completed(local);
328 }
329 EXPORT_SYMBOL(ieee80211_scan_completed);
330
331 static int ieee80211_start_sw_scan(struct ieee80211_local *local)
332 {
333         struct ieee80211_sub_if_data *sdata;
334
335         /*
336          * Hardware/driver doesn't support hw_scan, so use software
337          * scanning instead. First send a nullfunc frame with power save
338          * bit on so that AP will buffer the frames for us while we are not
339          * listening, then send probe requests to each channel and wait for
340          * the responses. After all channels are scanned, tune back to the
341          * original channel and send a nullfunc frame with power save bit
342          * off to trigger the AP to send us all the buffered frames.
343          *
344          * Note that while local->sw_scanning is true everything else but
345          * nullfunc frames and probe requests will be dropped in
346          * ieee80211_tx_h_check_assoc().
347          */
348         drv_sw_scan_start(local);
349
350         mutex_lock(&local->iflist_mtx);
351         list_for_each_entry(sdata, &local->interfaces, list) {
352                 if (!netif_running(sdata->dev))
353                         continue;
354
355                 /* disable beaconing */
356                 if (sdata->vif.type == NL80211_IFTYPE_AP ||
357                     sdata->vif.type == NL80211_IFTYPE_ADHOC ||
358                     sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
359                         ieee80211_bss_info_change_notify(
360                                 sdata, BSS_CHANGED_BEACON_ENABLED);
361
362                 /*
363                  * only handle non-STA interfaces here, STA interfaces
364                  * are handled in the scan state machine
365                  */
366                 if (sdata->vif.type != NL80211_IFTYPE_STATION)
367                         netif_tx_stop_all_queues(sdata->dev);
368         }
369         mutex_unlock(&local->iflist_mtx);
370
371         local->next_scan_state = SCAN_DECISION;
372         local->scan_channel_idx = 0;
373
374         ieee80211_configure_filter(local);
375
376         /* TODO: start scan as soon as all nullfunc frames are ACKed */
377         ieee80211_queue_delayed_work(&local->hw,
378                                      &local->scan_work,
379                                      IEEE80211_CHANNEL_TIME);
380
381         return 0;
382 }
383
384
385 static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
386                                   struct cfg80211_scan_request *req)
387 {
388         struct ieee80211_local *local = sdata->local;
389         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
390         int rc;
391
392         if (local->scan_req)
393                 return -EBUSY;
394
395         if (local->ops->hw_scan) {
396                 u8 *ies;
397                 int ielen;
398
399                 ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
400                               local->scan_ies_len + req->ie_len, GFP_KERNEL);
401                 if (!ies)
402                         return -ENOMEM;
403
404                 ielen = ieee80211_build_preq_ies(local, ies,
405                                                  req->ie, req->ie_len);
406                 local->orig_ies = req->ie;
407                 local->orig_ies_len = req->ie_len;
408                 req->ie = ies;
409                 req->ie_len = ielen;
410         }
411
412         local->scan_req = req;
413         local->scan_sdata = sdata;
414
415         if (req != local->int_scan_req &&
416             sdata->vif.type == NL80211_IFTYPE_STATION &&
417             !list_empty(&ifmgd->work_list)) {
418                 /* actually wait for the work it's doing to finish/time out */
419                 set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
420                 return 0;
421         }
422
423         if (local->ops->hw_scan)
424                 __set_bit(SCAN_HW_SCANNING, &local->scanning);
425         else
426                 __set_bit(SCAN_SW_SCANNING, &local->scanning);
427         /*
428          * Kicking off the scan need not be protected,
429          * only the scan variable stuff, since now
430          * local->scan_req is assigned and other callers
431          * will abort their scan attempts.
432          *
433          * This avoids getting a scan_mtx -> iflist_mtx
434          * dependency, so that the scan completed calls
435          * have more locking freedom.
436          */
437
438         ieee80211_recalc_idle(local);
439         mutex_unlock(&local->scan_mtx);
440
441         if (local->ops->hw_scan)
442                 rc = drv_hw_scan(local, local->scan_req);
443         else
444                 rc = ieee80211_start_sw_scan(local);
445
446         mutex_lock(&local->scan_mtx);
447
448         if (rc) {
449                 if (local->ops->hw_scan)
450                         ieee80211_restore_scan_ies(local);
451                 local->scanning = 0;
452
453                 ieee80211_recalc_idle(local);
454
455                 local->scan_req = NULL;
456                 local->scan_sdata = NULL;
457         }
458
459         return rc;
460 }
461
462 static int ieee80211_scan_state_decision(struct ieee80211_local *local,
463                                          unsigned long *next_delay)
464 {
465         bool associated = false;
466         struct ieee80211_sub_if_data *sdata;
467
468         /* if no more bands/channels left, complete scan and advance to the idle state */
469         if (local->scan_channel_idx >= local->scan_req->n_channels) {
470                 ieee80211_scan_completed(&local->hw, false);
471                 return 1;
472         }
473
474         /* check if at least one STA interface is associated */
475         mutex_lock(&local->iflist_mtx);
476         list_for_each_entry(sdata, &local->interfaces, list) {
477                 if (!netif_running(sdata->dev))
478                         continue;
479
480                 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
481                         if (sdata->u.mgd.associated) {
482                                 associated = true;
483                                 break;
484                         }
485                 }
486         }
487         mutex_unlock(&local->iflist_mtx);
488
489         if (local->scan_channel) {
490                 /*
491                  * we're currently scanning a different channel, let's
492                  * switch back to the operating channel now if at least
493                  * one interface is associated. Otherwise just scan the
494                  * next channel
495                  */
496                 if (associated)
497                         local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
498                 else
499                         local->next_scan_state = SCAN_SET_CHANNEL;
500         } else {
501                 /*
502                  * we're on the operating channel currently, let's
503                  * leave that channel now to scan another one
504                  */
505                 local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
506         }
507
508         *next_delay = 0;
509         return 0;
510 }
511
512 static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
513                                                     unsigned long *next_delay)
514 {
515         struct ieee80211_sub_if_data *sdata;
516
517         /*
518          * notify the AP about us leaving the channel and stop all STA interfaces
519          */
520         mutex_lock(&local->iflist_mtx);
521         list_for_each_entry(sdata, &local->interfaces, list) {
522                 if (!netif_running(sdata->dev))
523                         continue;
524
525                 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
526                         netif_tx_stop_all_queues(sdata->dev);
527                         if (sdata->u.mgd.associated)
528                                 ieee80211_scan_ps_enable(sdata);
529                 }
530         }
531         mutex_unlock(&local->iflist_mtx);
532
533         __set_bit(SCAN_OFF_CHANNEL, &local->scanning);
534
535         /* advance to the next channel to be scanned */
536         *next_delay = HZ / 10;
537         local->next_scan_state = SCAN_SET_CHANNEL;
538 }
539
540 static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *local,
541                                                     unsigned long *next_delay)
542 {
543         struct ieee80211_sub_if_data *sdata = local->scan_sdata;
544
545         /* switch back to the operating channel */
546         local->scan_channel = NULL;
547         ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
548
549         /*
550          * notify the AP about us being back and restart all STA interfaces
551          */
552         mutex_lock(&local->iflist_mtx);
553         list_for_each_entry(sdata, &local->interfaces, list) {
554                 if (!netif_running(sdata->dev))
555                         continue;
556
557                 /* Tell AP we're back */
558                 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
559                         if (sdata->u.mgd.associated)
560                                 ieee80211_scan_ps_disable(sdata);
561                         netif_tx_wake_all_queues(sdata->dev);
562                 }
563         }
564         mutex_unlock(&local->iflist_mtx);
565
566         __clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
567
568         *next_delay = HZ / 5;
569         local->next_scan_state = SCAN_DECISION;
570 }
571
572 static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
573                                              unsigned long *next_delay)
574 {
575         int skip;
576         struct ieee80211_channel *chan;
577         struct ieee80211_sub_if_data *sdata = local->scan_sdata;
578
579         skip = 0;
580         chan = local->scan_req->channels[local->scan_channel_idx];
581
582         if (chan->flags & IEEE80211_CHAN_DISABLED ||
583             (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
584              chan->flags & IEEE80211_CHAN_NO_IBSS))
585                 skip = 1;
586
587         if (!skip) {
588                 local->scan_channel = chan;
589                 if (ieee80211_hw_config(local,
590                                         IEEE80211_CONF_CHANGE_CHANNEL))
591                         skip = 1;
592         }
593
594         /* advance state machine to next channel/band */
595         local->scan_channel_idx++;
596
597         if (skip) {
598                 /* if we skip this channel return to the decision state */
599                 local->next_scan_state = SCAN_DECISION;
600                 return;
601         }
602
603         /*
604          * Probe delay is used to update the NAV, cf. 11.1.3.2.2
605          * (which unfortunately doesn't say _why_ step a) is done,
606          * but it waits for the probe delay or until a frame is
607          * received - and the received frame would update the NAV).
608          * For now, we do not support waiting until a frame is
609          * received.
610          *
611          * In any case, it is not necessary for a passive scan.
612          */
613         if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN ||
614             !local->scan_req->n_ssids) {
615                 *next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
616                 local->next_scan_state = SCAN_DECISION;
617                 return;
618         }
619
620         /* active scan, send probes */
621         *next_delay = IEEE80211_PROBE_DELAY;
622         local->next_scan_state = SCAN_SEND_PROBE;
623 }
624
625 static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
626                                             unsigned long *next_delay)
627 {
628         int i;
629         struct ieee80211_sub_if_data *sdata = local->scan_sdata;
630
631         for (i = 0; i < local->scan_req->n_ssids; i++)
632                 ieee80211_send_probe_req(
633                         sdata, NULL,
634                         local->scan_req->ssids[i].ssid,
635                         local->scan_req->ssids[i].ssid_len,
636                         local->scan_req->ie, local->scan_req->ie_len);
637
638         /*
639          * After sending probe requests, wait for probe responses
640          * on the channel.
641          */
642         *next_delay = IEEE80211_CHANNEL_TIME;
643         local->next_scan_state = SCAN_DECISION;
644 }
645
646 void ieee80211_scan_work(struct work_struct *work)
647 {
648         struct ieee80211_local *local =
649                 container_of(work, struct ieee80211_local, scan_work.work);
650         struct ieee80211_sub_if_data *sdata = local->scan_sdata;
651         unsigned long next_delay = 0;
652
653         mutex_lock(&local->scan_mtx);
654         if (!sdata || !local->scan_req) {
655                 mutex_unlock(&local->scan_mtx);
656                 return;
657         }
658
659         if (local->scan_req && !local->scanning) {
660                 struct cfg80211_scan_request *req = local->scan_req;
661                 int rc;
662
663                 local->scan_req = NULL;
664                 local->scan_sdata = NULL;
665
666                 rc = __ieee80211_start_scan(sdata, req);
667                 mutex_unlock(&local->scan_mtx);
668
669                 if (rc)
670                         ieee80211_scan_completed(&local->hw, true);
671                 return;
672         }
673
674         mutex_unlock(&local->scan_mtx);
675
676         /*
677          * Avoid re-scheduling when the sdata is going away.
678          */
679         if (!netif_running(sdata->dev)) {
680                 ieee80211_scan_completed(&local->hw, true);
681                 return;
682         }
683
684         /*
685          * as long as no delay is required advance immediately
686          * without scheduling a new work
687          */
688         do {
689                 switch (local->next_scan_state) {
690                 case SCAN_DECISION:
691                         if (ieee80211_scan_state_decision(local, &next_delay))
692                                 return;
693                         break;
694                 case SCAN_SET_CHANNEL:
695                         ieee80211_scan_state_set_channel(local, &next_delay);
696                         break;
697                 case SCAN_SEND_PROBE:
698                         ieee80211_scan_state_send_probe(local, &next_delay);
699                         break;
700                 case SCAN_LEAVE_OPER_CHANNEL:
701                         ieee80211_scan_state_leave_oper_channel(local, &next_delay);
702                         break;
703                 case SCAN_ENTER_OPER_CHANNEL:
704                         ieee80211_scan_state_enter_oper_channel(local, &next_delay);
705                         break;
706                 }
707         } while (next_delay == 0);
708
709         ieee80211_queue_delayed_work(&local->hw, &local->scan_work, next_delay);
710 }
711
712 int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
713                            struct cfg80211_scan_request *req)
714 {
715         int res;
716
717         mutex_lock(&sdata->local->scan_mtx);
718         res = __ieee80211_start_scan(sdata, req);
719         mutex_unlock(&sdata->local->scan_mtx);
720
721         return res;
722 }
723
724 int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
725                                     const u8 *ssid, u8 ssid_len)
726 {
727         struct ieee80211_local *local = sdata->local;
728         int ret = -EBUSY;
729
730         mutex_lock(&local->scan_mtx);
731
732         /* busy scanning */
733         if (local->scan_req)
734                 goto unlock;
735
736         memcpy(local->int_scan_req->ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
737         local->int_scan_req->ssids[0].ssid_len = ssid_len;
738
739         ret = __ieee80211_start_scan(sdata, sdata->local->int_scan_req);
740  unlock:
741         mutex_unlock(&local->scan_mtx);
742         return ret;
743 }
744
745 void ieee80211_scan_cancel(struct ieee80211_local *local)
746 {
747         bool abortscan;
748
749         cancel_delayed_work_sync(&local->scan_work);
750
751         /*
752          * Only call this function when a scan can't be
753          * queued -- mostly at suspend under RTNL.
754          */
755         mutex_lock(&local->scan_mtx);
756         abortscan = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
757                     (!local->scanning && local->scan_req);
758         mutex_unlock(&local->scan_mtx);
759
760         if (abortscan)
761                 ieee80211_scan_completed(&local->hw, true);
762 }