mac80211: add support for showing the last rx bitrate
[linux-2.6.git] / net / mac80211 / rx.c
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
5  * Copyright 2007-2010  Johannes Berg <johannes@sipsolutions.net>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/jiffies.h>
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/skbuff.h>
16 #include <linux/netdevice.h>
17 #include <linux/etherdevice.h>
18 #include <linux/rcupdate.h>
19 #include <net/mac80211.h>
20 #include <net/ieee80211_radiotap.h>
21
22 #include "ieee80211_i.h"
23 #include "driver-ops.h"
24 #include "led.h"
25 #include "mesh.h"
26 #include "wep.h"
27 #include "wpa.h"
28 #include "tkip.h"
29 #include "wme.h"
30
31 /*
32  * monitor mode reception
33  *
34  * This function cleans up the SKB, i.e. it removes all the stuff
35  * only useful for monitoring.
36  */
37 static struct sk_buff *remove_monitor_info(struct ieee80211_local *local,
38                                            struct sk_buff *skb)
39 {
40         if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) {
41                 if (likely(skb->len > FCS_LEN))
42                         __pskb_trim(skb, skb->len - FCS_LEN);
43                 else {
44                         /* driver bug */
45                         WARN_ON(1);
46                         dev_kfree_skb(skb);
47                         skb = NULL;
48                 }
49         }
50
51         return skb;
52 }
53
54 static inline int should_drop_frame(struct sk_buff *skb,
55                                     int present_fcs_len)
56 {
57         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
58         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
59
60         if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
61                 return 1;
62         if (unlikely(skb->len < 16 + present_fcs_len))
63                 return 1;
64         if (ieee80211_is_ctl(hdr->frame_control) &&
65             !ieee80211_is_pspoll(hdr->frame_control) &&
66             !ieee80211_is_back_req(hdr->frame_control))
67                 return 1;
68         return 0;
69 }
70
71 static int
72 ieee80211_rx_radiotap_len(struct ieee80211_local *local,
73                           struct ieee80211_rx_status *status)
74 {
75         int len;
76
77         /* always present fields */
78         len = sizeof(struct ieee80211_radiotap_header) + 9;
79
80         if (status->flag & RX_FLAG_MACTIME_MPDU)
81                 len += 8;
82         if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
83                 len += 1;
84
85         if (len & 1) /* padding for RX_FLAGS if necessary */
86                 len++;
87
88         if (status->flag & RX_FLAG_HT) /* HT info */
89                 len += 3;
90
91         return len;
92 }
93
94 /*
95  * ieee80211_add_rx_radiotap_header - add radiotap header
96  *
97  * add a radiotap header containing all the fields which the hardware provided.
98  */
99 static void
100 ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
101                                  struct sk_buff *skb,
102                                  struct ieee80211_rate *rate,
103                                  int rtap_len)
104 {
105         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
106         struct ieee80211_radiotap_header *rthdr;
107         unsigned char *pos;
108         u16 rx_flags = 0;
109
110         rthdr = (struct ieee80211_radiotap_header *)skb_push(skb, rtap_len);
111         memset(rthdr, 0, rtap_len);
112
113         /* radiotap header, set always present flags */
114         rthdr->it_present =
115                 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
116                             (1 << IEEE80211_RADIOTAP_CHANNEL) |
117                             (1 << IEEE80211_RADIOTAP_ANTENNA) |
118                             (1 << IEEE80211_RADIOTAP_RX_FLAGS));
119         rthdr->it_len = cpu_to_le16(rtap_len);
120
121         pos = (unsigned char *)(rthdr+1);
122
123         /* the order of the following fields is important */
124
125         /* IEEE80211_RADIOTAP_TSFT */
126         if (status->flag & RX_FLAG_MACTIME_MPDU) {
127                 put_unaligned_le64(status->mactime, pos);
128                 rthdr->it_present |=
129                         cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT);
130                 pos += 8;
131         }
132
133         /* IEEE80211_RADIOTAP_FLAGS */
134         if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
135                 *pos |= IEEE80211_RADIOTAP_F_FCS;
136         if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
137                 *pos |= IEEE80211_RADIOTAP_F_BADFCS;
138         if (status->flag & RX_FLAG_SHORTPRE)
139                 *pos |= IEEE80211_RADIOTAP_F_SHORTPRE;
140         pos++;
141
142         /* IEEE80211_RADIOTAP_RATE */
143         if (status->flag & RX_FLAG_HT) {
144                 /*
145                  * MCS information is a separate field in radiotap,
146                  * added below.
147                  */
148                 *pos = 0;
149         } else {
150                 rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE);
151                 *pos = rate->bitrate / 5;
152         }
153         pos++;
154
155         /* IEEE80211_RADIOTAP_CHANNEL */
156         put_unaligned_le16(status->freq, pos);
157         pos += 2;
158         if (status->band == IEEE80211_BAND_5GHZ)
159                 put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
160                                    pos);
161         else if (status->flag & RX_FLAG_HT)
162                 put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
163                                    pos);
164         else if (rate->flags & IEEE80211_RATE_ERP_G)
165                 put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
166                                    pos);
167         else
168                 put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
169                                    pos);
170         pos += 2;
171
172         /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
173         if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
174                 *pos = status->signal;
175                 rthdr->it_present |=
176                         cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
177                 pos++;
178         }
179
180         /* IEEE80211_RADIOTAP_LOCK_QUALITY is missing */
181
182         /* IEEE80211_RADIOTAP_ANTENNA */
183         *pos = status->antenna;
184         pos++;
185
186         /* IEEE80211_RADIOTAP_DB_ANTNOISE is not used */
187
188         /* IEEE80211_RADIOTAP_RX_FLAGS */
189         /* ensure 2 byte alignment for the 2 byte field as required */
190         if ((pos - (u8 *)rthdr) & 1)
191                 pos++;
192         if (status->flag & RX_FLAG_FAILED_PLCP_CRC)
193                 rx_flags |= IEEE80211_RADIOTAP_F_RX_BADPLCP;
194         put_unaligned_le16(rx_flags, pos);
195         pos += 2;
196
197         if (status->flag & RX_FLAG_HT) {
198                 rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS);
199                 *pos++ = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
200                          IEEE80211_RADIOTAP_MCS_HAVE_GI |
201                          IEEE80211_RADIOTAP_MCS_HAVE_BW;
202                 *pos = 0;
203                 if (status->flag & RX_FLAG_SHORT_GI)
204                         *pos |= IEEE80211_RADIOTAP_MCS_SGI;
205                 if (status->flag & RX_FLAG_40MHZ)
206                         *pos |= IEEE80211_RADIOTAP_MCS_BW_40;
207                 pos++;
208                 *pos++ = status->rate_idx;
209         }
210 }
211
212 /*
213  * This function copies a received frame to all monitor interfaces and
214  * returns a cleaned-up SKB that no longer includes the FCS nor the
215  * radiotap header the driver might have added.
216  */
217 static struct sk_buff *
218 ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb,
219                      struct ieee80211_rate *rate)
220 {
221         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(origskb);
222         struct ieee80211_sub_if_data *sdata;
223         int needed_headroom = 0;
224         struct sk_buff *skb, *skb2;
225         struct net_device *prev_dev = NULL;
226         int present_fcs_len = 0;
227
228         /*
229          * First, we may need to make a copy of the skb because
230          *  (1) we need to modify it for radiotap (if not present), and
231          *  (2) the other RX handlers will modify the skb we got.
232          *
233          * We don't need to, of course, if we aren't going to return
234          * the SKB because it has a bad FCS/PLCP checksum.
235          */
236
237         /* room for the radiotap header based on driver features */
238         needed_headroom = ieee80211_rx_radiotap_len(local, status);
239
240         if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
241                 present_fcs_len = FCS_LEN;
242
243         /* make sure hdr->frame_control is on the linear part */
244         if (!pskb_may_pull(origskb, 2)) {
245                 dev_kfree_skb(origskb);
246                 return NULL;
247         }
248
249         if (!local->monitors) {
250                 if (should_drop_frame(origskb, present_fcs_len)) {
251                         dev_kfree_skb(origskb);
252                         return NULL;
253                 }
254
255                 return remove_monitor_info(local, origskb);
256         }
257
258         if (should_drop_frame(origskb, present_fcs_len)) {
259                 /* only need to expand headroom if necessary */
260                 skb = origskb;
261                 origskb = NULL;
262
263                 /*
264                  * This shouldn't trigger often because most devices have an
265                  * RX header they pull before we get here, and that should
266                  * be big enough for our radiotap information. We should
267                  * probably export the length to drivers so that we can have
268                  * them allocate enough headroom to start with.
269                  */
270                 if (skb_headroom(skb) < needed_headroom &&
271                     pskb_expand_head(skb, needed_headroom, 0, GFP_ATOMIC)) {
272                         dev_kfree_skb(skb);
273                         return NULL;
274                 }
275         } else {
276                 /*
277                  * Need to make a copy and possibly remove radiotap header
278                  * and FCS from the original.
279                  */
280                 skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC);
281
282                 origskb = remove_monitor_info(local, origskb);
283
284                 if (!skb)
285                         return origskb;
286         }
287
288         /* prepend radiotap information */
289         ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom);
290
291         skb_reset_mac_header(skb);
292         skb->ip_summed = CHECKSUM_UNNECESSARY;
293         skb->pkt_type = PACKET_OTHERHOST;
294         skb->protocol = htons(ETH_P_802_2);
295
296         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
297                 if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
298                         continue;
299
300                 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES)
301                         continue;
302
303                 if (!ieee80211_sdata_running(sdata))
304                         continue;
305
306                 if (prev_dev) {
307                         skb2 = skb_clone(skb, GFP_ATOMIC);
308                         if (skb2) {
309                                 skb2->dev = prev_dev;
310                                 netif_receive_skb(skb2);
311                         }
312                 }
313
314                 prev_dev = sdata->dev;
315                 sdata->dev->stats.rx_packets++;
316                 sdata->dev->stats.rx_bytes += skb->len;
317         }
318
319         if (prev_dev) {
320                 skb->dev = prev_dev;
321                 netif_receive_skb(skb);
322         } else
323                 dev_kfree_skb(skb);
324
325         return origskb;
326 }
327
328
329 static void ieee80211_parse_qos(struct ieee80211_rx_data *rx)
330 {
331         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
332         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
333         int tid;
334
335         /* does the frame have a qos control field? */
336         if (ieee80211_is_data_qos(hdr->frame_control)) {
337                 u8 *qc = ieee80211_get_qos_ctl(hdr);
338                 /* frame has qos control */
339                 tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
340                 if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
341                         status->rx_flags |= IEEE80211_RX_AMSDU;
342         } else {
343                 /*
344                  * IEEE 802.11-2007, 7.1.3.4.1 ("Sequence Number field"):
345                  *
346                  *      Sequence numbers for management frames, QoS data
347                  *      frames with a broadcast/multicast address in the
348                  *      Address 1 field, and all non-QoS data frames sent
349                  *      by QoS STAs are assigned using an additional single
350                  *      modulo-4096 counter, [...]
351                  *
352                  * We also use that counter for non-QoS STAs.
353                  */
354                 tid = NUM_RX_DATA_QUEUES - 1;
355         }
356
357         rx->queue = tid;
358         /* Set skb->priority to 1d tag if highest order bit of TID is not set.
359          * For now, set skb->priority to 0 for other cases. */
360         rx->skb->priority = (tid > 7) ? 0 : tid;
361 }
362
363 /**
364  * DOC: Packet alignment
365  *
366  * Drivers always need to pass packets that are aligned to two-byte boundaries
367  * to the stack.
368  *
369  * Additionally, should, if possible, align the payload data in a way that
370  * guarantees that the contained IP header is aligned to a four-byte
371  * boundary. In the case of regular frames, this simply means aligning the
372  * payload to a four-byte boundary (because either the IP header is directly
373  * contained, or IV/RFC1042 headers that have a length divisible by four are
374  * in front of it).  If the payload data is not properly aligned and the
375  * architecture doesn't support efficient unaligned operations, mac80211
376  * will align the data.
377  *
378  * With A-MSDU frames, however, the payload data address must yield two modulo
379  * four because there are 14-byte 802.3 headers within the A-MSDU frames that
380  * push the IP header further back to a multiple of four again. Thankfully, the
381  * specs were sane enough this time around to require padding each A-MSDU
382  * subframe to a length that is a multiple of four.
383  *
384  * Padding like Atheros hardware adds which is inbetween the 802.11 header and
385  * the payload is not supported, the driver is required to move the 802.11
386  * header to be directly in front of the payload in that case.
387  */
388 static void ieee80211_verify_alignment(struct ieee80211_rx_data *rx)
389 {
390 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
391         WARN_ONCE((unsigned long)rx->skb->data & 1,
392                   "unaligned packet at 0x%p\n", rx->skb->data);
393 #endif
394 }
395
396
397 /* rx handlers */
398
399 static ieee80211_rx_result debug_noinline
400 ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
401 {
402         struct ieee80211_local *local = rx->local;
403         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
404         struct sk_buff *skb = rx->skb;
405
406         if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN)))
407                 return RX_CONTINUE;
408
409         if (test_bit(SCAN_HW_SCANNING, &local->scanning) ||
410             test_bit(SCAN_SW_SCANNING, &local->scanning))
411                 return ieee80211_scan_rx(rx->sdata, skb);
412
413         /* scanning finished during invoking of handlers */
414         I802_DEBUG_INC(local->rx_handlers_drop_passive_scan);
415         return RX_DROP_UNUSABLE;
416 }
417
418
419 static int ieee80211_is_unicast_robust_mgmt_frame(struct sk_buff *skb)
420 {
421         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
422
423         if (skb->len < 24 || is_multicast_ether_addr(hdr->addr1))
424                 return 0;
425
426         return ieee80211_is_robust_mgmt_frame(hdr);
427 }
428
429
430 static int ieee80211_is_multicast_robust_mgmt_frame(struct sk_buff *skb)
431 {
432         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
433
434         if (skb->len < 24 || !is_multicast_ether_addr(hdr->addr1))
435                 return 0;
436
437         return ieee80211_is_robust_mgmt_frame(hdr);
438 }
439
440
441 /* Get the BIP key index from MMIE; return -1 if this is not a BIP frame */
442 static int ieee80211_get_mmie_keyidx(struct sk_buff *skb)
443 {
444         struct ieee80211_mgmt *hdr = (struct ieee80211_mgmt *) skb->data;
445         struct ieee80211_mmie *mmie;
446
447         if (skb->len < 24 + sizeof(*mmie) ||
448             !is_multicast_ether_addr(hdr->da))
449                 return -1;
450
451         if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) hdr))
452                 return -1; /* not a robust management frame */
453
454         mmie = (struct ieee80211_mmie *)
455                 (skb->data + skb->len - sizeof(*mmie));
456         if (mmie->element_id != WLAN_EID_MMIE ||
457             mmie->length != sizeof(*mmie) - 2)
458                 return -1;
459
460         return le16_to_cpu(mmie->key_id);
461 }
462
463
464 static ieee80211_rx_result
465 ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
466 {
467         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
468         unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
469         char *dev_addr = rx->sdata->vif.addr;
470
471         if (ieee80211_is_data(hdr->frame_control)) {
472                 if (is_multicast_ether_addr(hdr->addr1)) {
473                         if (ieee80211_has_tods(hdr->frame_control) ||
474                                 !ieee80211_has_fromds(hdr->frame_control))
475                                 return RX_DROP_MONITOR;
476                         if (memcmp(hdr->addr3, dev_addr, ETH_ALEN) == 0)
477                                 return RX_DROP_MONITOR;
478                 } else {
479                         if (!ieee80211_has_a4(hdr->frame_control))
480                                 return RX_DROP_MONITOR;
481                         if (memcmp(hdr->addr4, dev_addr, ETH_ALEN) == 0)
482                                 return RX_DROP_MONITOR;
483                 }
484         }
485
486         /* If there is not an established peer link and this is not a peer link
487          * establisment frame, beacon or probe, drop the frame.
488          */
489
490         if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) {
491                 struct ieee80211_mgmt *mgmt;
492
493                 if (!ieee80211_is_mgmt(hdr->frame_control))
494                         return RX_DROP_MONITOR;
495
496                 if (ieee80211_is_action(hdr->frame_control)) {
497                         mgmt = (struct ieee80211_mgmt *)hdr;
498                         if (mgmt->u.action.category != WLAN_CATEGORY_MESH_PLINK)
499                                 return RX_DROP_MONITOR;
500                         return RX_CONTINUE;
501                 }
502
503                 if (ieee80211_is_probe_req(hdr->frame_control) ||
504                     ieee80211_is_probe_resp(hdr->frame_control) ||
505                     ieee80211_is_beacon(hdr->frame_control))
506                         return RX_CONTINUE;
507
508                 return RX_DROP_MONITOR;
509
510         }
511
512 #define msh_h_get(h, l) ((struct ieee80211s_hdr *) ((u8 *)h + l))
513
514         if (ieee80211_is_data(hdr->frame_control) &&
515             is_multicast_ether_addr(hdr->addr1) &&
516             mesh_rmc_check(hdr->addr3, msh_h_get(hdr, hdrlen), rx->sdata))
517                 return RX_DROP_MONITOR;
518 #undef msh_h_get
519
520         return RX_CONTINUE;
521 }
522
523 #define SEQ_MODULO 0x1000
524 #define SEQ_MASK   0xfff
525
526 static inline int seq_less(u16 sq1, u16 sq2)
527 {
528         return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
529 }
530
531 static inline u16 seq_inc(u16 sq)
532 {
533         return (sq + 1) & SEQ_MASK;
534 }
535
536 static inline u16 seq_sub(u16 sq1, u16 sq2)
537 {
538         return (sq1 - sq2) & SEQ_MASK;
539 }
540
541
542 static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
543                                             struct tid_ampdu_rx *tid_agg_rx,
544                                             int index)
545 {
546         struct ieee80211_local *local = hw_to_local(hw);
547         struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
548         struct ieee80211_rx_status *status;
549
550         lockdep_assert_held(&tid_agg_rx->reorder_lock);
551
552         if (!skb)
553                 goto no_frame;
554
555         /* release the frame from the reorder ring buffer */
556         tid_agg_rx->stored_mpdu_num--;
557         tid_agg_rx->reorder_buf[index] = NULL;
558         status = IEEE80211_SKB_RXCB(skb);
559         status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE;
560         skb_queue_tail(&local->rx_skb_queue, skb);
561
562 no_frame:
563         tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
564 }
565
566 static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
567                                              struct tid_ampdu_rx *tid_agg_rx,
568                                              u16 head_seq_num)
569 {
570         int index;
571
572         lockdep_assert_held(&tid_agg_rx->reorder_lock);
573
574         while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
575                 index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
576                                                         tid_agg_rx->buf_size;
577                 ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
578         }
579 }
580
581 /*
582  * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
583  * the skb was added to the buffer longer than this time ago, the earlier
584  * frames that have not yet been received are assumed to be lost and the skb
585  * can be released for processing. This may also release other skb's from the
586  * reorder buffer if there are no additional gaps between the frames.
587  *
588  * Callers must hold tid_agg_rx->reorder_lock.
589  */
590 #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
591
592 static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
593                                           struct tid_ampdu_rx *tid_agg_rx)
594 {
595         int index, j;
596
597         lockdep_assert_held(&tid_agg_rx->reorder_lock);
598
599         /* release the buffer until next missing frame */
600         index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
601                                                 tid_agg_rx->buf_size;
602         if (!tid_agg_rx->reorder_buf[index] &&
603             tid_agg_rx->stored_mpdu_num > 1) {
604                 /*
605                  * No buffers ready to be released, but check whether any
606                  * frames in the reorder buffer have timed out.
607                  */
608                 int skipped = 1;
609                 for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
610                      j = (j + 1) % tid_agg_rx->buf_size) {
611                         if (!tid_agg_rx->reorder_buf[j]) {
612                                 skipped++;
613                                 continue;
614                         }
615                         if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
616                                         HT_RX_REORDER_BUF_TIMEOUT))
617                                 goto set_release_timer;
618
619 #ifdef CONFIG_MAC80211_HT_DEBUG
620                         if (net_ratelimit())
621                                 wiphy_debug(hw->wiphy,
622                                             "release an RX reorder frame due to timeout on earlier frames\n");
623 #endif
624                         ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
625
626                         /*
627                          * Increment the head seq# also for the skipped slots.
628                          */
629                         tid_agg_rx->head_seq_num =
630                                 (tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
631                         skipped = 0;
632                 }
633         } else while (tid_agg_rx->reorder_buf[index]) {
634                 ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
635                 index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
636                                                         tid_agg_rx->buf_size;
637         }
638
639         if (tid_agg_rx->stored_mpdu_num) {
640                 j = index = seq_sub(tid_agg_rx->head_seq_num,
641                                     tid_agg_rx->ssn) % tid_agg_rx->buf_size;
642
643                 for (; j != (index - 1) % tid_agg_rx->buf_size;
644                      j = (j + 1) % tid_agg_rx->buf_size) {
645                         if (tid_agg_rx->reorder_buf[j])
646                                 break;
647                 }
648
649  set_release_timer:
650
651                 mod_timer(&tid_agg_rx->reorder_timer,
652                           tid_agg_rx->reorder_time[j] +
653                           HT_RX_REORDER_BUF_TIMEOUT);
654         } else {
655                 del_timer(&tid_agg_rx->reorder_timer);
656         }
657 }
658
659 /*
660  * As this function belongs to the RX path it must be under
661  * rcu_read_lock protection. It returns false if the frame
662  * can be processed immediately, true if it was consumed.
663  */
664 static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
665                                              struct tid_ampdu_rx *tid_agg_rx,
666                                              struct sk_buff *skb)
667 {
668         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
669         u16 sc = le16_to_cpu(hdr->seq_ctrl);
670         u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
671         u16 head_seq_num, buf_size;
672         int index;
673         bool ret = true;
674
675         spin_lock(&tid_agg_rx->reorder_lock);
676
677         buf_size = tid_agg_rx->buf_size;
678         head_seq_num = tid_agg_rx->head_seq_num;
679
680         /* frame with out of date sequence number */
681         if (seq_less(mpdu_seq_num, head_seq_num)) {
682                 dev_kfree_skb(skb);
683                 goto out;
684         }
685
686         /*
687          * If frame the sequence number exceeds our buffering window
688          * size release some previous frames to make room for this one.
689          */
690         if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
691                 head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
692                 /* release stored frames up to new head to stack */
693                 ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num);
694         }
695
696         /* Now the new frame is always in the range of the reordering buffer */
697
698         index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size;
699
700         /* check if we already stored this frame */
701         if (tid_agg_rx->reorder_buf[index]) {
702                 dev_kfree_skb(skb);
703                 goto out;
704         }
705
706         /*
707          * If the current MPDU is in the right order and nothing else
708          * is stored we can process it directly, no need to buffer it.
709          */
710         if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
711             tid_agg_rx->stored_mpdu_num == 0) {
712                 tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
713                 ret = false;
714                 goto out;
715         }
716
717         /* put the frame in the reordering buffer */
718         tid_agg_rx->reorder_buf[index] = skb;
719         tid_agg_rx->reorder_time[index] = jiffies;
720         tid_agg_rx->stored_mpdu_num++;
721         ieee80211_sta_reorder_release(hw, tid_agg_rx);
722
723  out:
724         spin_unlock(&tid_agg_rx->reorder_lock);
725         return ret;
726 }
727
728 /*
729  * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns
730  * true if the MPDU was buffered, false if it should be processed.
731  */
732 static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx)
733 {
734         struct sk_buff *skb = rx->skb;
735         struct ieee80211_local *local = rx->local;
736         struct ieee80211_hw *hw = &local->hw;
737         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
738         struct sta_info *sta = rx->sta;
739         struct tid_ampdu_rx *tid_agg_rx;
740         u16 sc;
741         int tid;
742
743         if (!ieee80211_is_data_qos(hdr->frame_control))
744                 goto dont_reorder;
745
746         /*
747          * filter the QoS data rx stream according to
748          * STA/TID and check if this STA/TID is on aggregation
749          */
750
751         if (!sta)
752                 goto dont_reorder;
753
754         tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
755
756         tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]);
757         if (!tid_agg_rx)
758                 goto dont_reorder;
759
760         /* qos null data frames are excluded */
761         if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
762                 goto dont_reorder;
763
764         /* new, potentially un-ordered, ampdu frame - process it */
765
766         /* reset session timer */
767         if (tid_agg_rx->timeout)
768                 mod_timer(&tid_agg_rx->session_timer,
769                           TU_TO_EXP_TIME(tid_agg_rx->timeout));
770
771         /* if this mpdu is fragmented - terminate rx aggregation session */
772         sc = le16_to_cpu(hdr->seq_ctrl);
773         if (sc & IEEE80211_SCTL_FRAG) {
774                 skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
775                 skb_queue_tail(&rx->sdata->skb_queue, skb);
776                 ieee80211_queue_work(&local->hw, &rx->sdata->work);
777                 return;
778         }
779
780         /*
781          * No locking needed -- we will only ever process one
782          * RX packet at a time, and thus own tid_agg_rx. All
783          * other code manipulating it needs to (and does) make
784          * sure that we cannot get to it any more before doing
785          * anything with it.
786          */
787         if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb))
788                 return;
789
790  dont_reorder:
791         skb_queue_tail(&local->rx_skb_queue, skb);
792 }
793
794 static ieee80211_rx_result debug_noinline
795 ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
796 {
797         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
798         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
799
800         /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
801         if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) {
802                 if (unlikely(ieee80211_has_retry(hdr->frame_control) &&
803                              rx->sta->last_seq_ctrl[rx->queue] ==
804                              hdr->seq_ctrl)) {
805                         if (status->rx_flags & IEEE80211_RX_RA_MATCH) {
806                                 rx->local->dot11FrameDuplicateCount++;
807                                 rx->sta->num_duplicates++;
808                         }
809                         return RX_DROP_UNUSABLE;
810                 } else
811                         rx->sta->last_seq_ctrl[rx->queue] = hdr->seq_ctrl;
812         }
813
814         if (unlikely(rx->skb->len < 16)) {
815                 I802_DEBUG_INC(rx->local->rx_handlers_drop_short);
816                 return RX_DROP_MONITOR;
817         }
818
819         /* Drop disallowed frame classes based on STA auth/assoc state;
820          * IEEE 802.11, Chap 5.5.
821          *
822          * mac80211 filters only based on association state, i.e. it drops
823          * Class 3 frames from not associated stations. hostapd sends
824          * deauth/disassoc frames when needed. In addition, hostapd is
825          * responsible for filtering on both auth and assoc states.
826          */
827
828         if (ieee80211_vif_is_mesh(&rx->sdata->vif))
829                 return ieee80211_rx_mesh_check(rx);
830
831         if (unlikely((ieee80211_is_data(hdr->frame_control) ||
832                       ieee80211_is_pspoll(hdr->frame_control)) &&
833                      rx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
834                      rx->sdata->vif.type != NL80211_IFTYPE_WDS &&
835                      (!rx->sta || !test_sta_flags(rx->sta, WLAN_STA_ASSOC))))
836                 return RX_DROP_MONITOR;
837
838         return RX_CONTINUE;
839 }
840
841
842 static ieee80211_rx_result debug_noinline
843 ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
844 {
845         struct sk_buff *skb = rx->skb;
846         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
847         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
848         int keyidx;
849         int hdrlen;
850         ieee80211_rx_result result = RX_DROP_UNUSABLE;
851         struct ieee80211_key *sta_ptk = NULL;
852         int mmie_keyidx = -1;
853         __le16 fc;
854
855         /*
856          * Key selection 101
857          *
858          * There are four types of keys:
859          *  - GTK (group keys)
860          *  - IGTK (group keys for management frames)
861          *  - PTK (pairwise keys)
862          *  - STK (station-to-station pairwise keys)
863          *
864          * When selecting a key, we have to distinguish between multicast
865          * (including broadcast) and unicast frames, the latter can only
866          * use PTKs and STKs while the former always use GTKs and IGTKs.
867          * Unless, of course, actual WEP keys ("pre-RSNA") are used, then
868          * unicast frames can also use key indices like GTKs. Hence, if we
869          * don't have a PTK/STK we check the key index for a WEP key.
870          *
871          * Note that in a regular BSS, multicast frames are sent by the
872          * AP only, associated stations unicast the frame to the AP first
873          * which then multicasts it on their behalf.
874          *
875          * There is also a slight problem in IBSS mode: GTKs are negotiated
876          * with each station, that is something we don't currently handle.
877          * The spec seems to expect that one negotiates the same key with
878          * every station but there's no such requirement; VLANs could be
879          * possible.
880          */
881
882         /*
883          * No point in finding a key and decrypting if the frame is neither
884          * addressed to us nor a multicast frame.
885          */
886         if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
887                 return RX_CONTINUE;
888
889         /* start without a key */
890         rx->key = NULL;
891
892         if (rx->sta)
893                 sta_ptk = rcu_dereference(rx->sta->ptk);
894
895         fc = hdr->frame_control;
896
897         if (!ieee80211_has_protected(fc))
898                 mmie_keyidx = ieee80211_get_mmie_keyidx(rx->skb);
899
900         if (!is_multicast_ether_addr(hdr->addr1) && sta_ptk) {
901                 rx->key = sta_ptk;
902                 if ((status->flag & RX_FLAG_DECRYPTED) &&
903                     (status->flag & RX_FLAG_IV_STRIPPED))
904                         return RX_CONTINUE;
905                 /* Skip decryption if the frame is not protected. */
906                 if (!ieee80211_has_protected(fc))
907                         return RX_CONTINUE;
908         } else if (mmie_keyidx >= 0) {
909                 /* Broadcast/multicast robust management frame / BIP */
910                 if ((status->flag & RX_FLAG_DECRYPTED) &&
911                     (status->flag & RX_FLAG_IV_STRIPPED))
912                         return RX_CONTINUE;
913
914                 if (mmie_keyidx < NUM_DEFAULT_KEYS ||
915                     mmie_keyidx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS)
916                         return RX_DROP_MONITOR; /* unexpected BIP keyidx */
917                 if (rx->sta)
918                         rx->key = rcu_dereference(rx->sta->gtk[mmie_keyidx]);
919                 if (!rx->key)
920                         rx->key = rcu_dereference(rx->sdata->keys[mmie_keyidx]);
921         } else if (!ieee80211_has_protected(fc)) {
922                 /*
923                  * The frame was not protected, so skip decryption. However, we
924                  * need to set rx->key if there is a key that could have been
925                  * used so that the frame may be dropped if encryption would
926                  * have been expected.
927                  */
928                 struct ieee80211_key *key = NULL;
929                 struct ieee80211_sub_if_data *sdata = rx->sdata;
930                 int i;
931
932                 if (ieee80211_is_mgmt(fc) &&
933                     is_multicast_ether_addr(hdr->addr1) &&
934                     (key = rcu_dereference(rx->sdata->default_mgmt_key)))
935                         rx->key = key;
936                 else {
937                         if (rx->sta) {
938                                 for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
939                                         key = rcu_dereference(rx->sta->gtk[i]);
940                                         if (key)
941                                                 break;
942                                 }
943                         }
944                         if (!key) {
945                                 for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
946                                         key = rcu_dereference(sdata->keys[i]);
947                                         if (key)
948                                                 break;
949                                 }
950                         }
951                         if (key)
952                                 rx->key = key;
953                 }
954                 return RX_CONTINUE;
955         } else {
956                 u8 keyid;
957                 /*
958                  * The device doesn't give us the IV so we won't be
959                  * able to look up the key. That's ok though, we
960                  * don't need to decrypt the frame, we just won't
961                  * be able to keep statistics accurate.
962                  * Except for key threshold notifications, should
963                  * we somehow allow the driver to tell us which key
964                  * the hardware used if this flag is set?
965                  */
966                 if ((status->flag & RX_FLAG_DECRYPTED) &&
967                     (status->flag & RX_FLAG_IV_STRIPPED))
968                         return RX_CONTINUE;
969
970                 hdrlen = ieee80211_hdrlen(fc);
971
972                 if (rx->skb->len < 8 + hdrlen)
973                         return RX_DROP_UNUSABLE; /* TODO: count this? */
974
975                 /*
976                  * no need to call ieee80211_wep_get_keyidx,
977                  * it verifies a bunch of things we've done already
978                  */
979                 skb_copy_bits(rx->skb, hdrlen + 3, &keyid, 1);
980                 keyidx = keyid >> 6;
981
982                 /* check per-station GTK first, if multicast packet */
983                 if (is_multicast_ether_addr(hdr->addr1) && rx->sta)
984                         rx->key = rcu_dereference(rx->sta->gtk[keyidx]);
985
986                 /* if not found, try default key */
987                 if (!rx->key) {
988                         rx->key = rcu_dereference(rx->sdata->keys[keyidx]);
989
990                         /*
991                          * RSNA-protected unicast frames should always be
992                          * sent with pairwise or station-to-station keys,
993                          * but for WEP we allow using a key index as well.
994                          */
995                         if (rx->key &&
996                             rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 &&
997                             rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 &&
998                             !is_multicast_ether_addr(hdr->addr1))
999                                 rx->key = NULL;
1000                 }
1001         }
1002
1003         if (rx->key) {
1004                 rx->key->tx_rx_count++;
1005                 /* TODO: add threshold stuff again */
1006         } else {
1007                 return RX_DROP_MONITOR;
1008         }
1009
1010         if (skb_linearize(rx->skb))
1011                 return RX_DROP_UNUSABLE;
1012         /* the hdr variable is invalid now! */
1013
1014         switch (rx->key->conf.cipher) {
1015         case WLAN_CIPHER_SUITE_WEP40:
1016         case WLAN_CIPHER_SUITE_WEP104:
1017                 /* Check for weak IVs if possible */
1018                 if (rx->sta && ieee80211_is_data(fc) &&
1019                     (!(status->flag & RX_FLAG_IV_STRIPPED) ||
1020                      !(status->flag & RX_FLAG_DECRYPTED)) &&
1021                     ieee80211_wep_is_weak_iv(rx->skb, rx->key))
1022                         rx->sta->wep_weak_iv_count++;
1023
1024                 result = ieee80211_crypto_wep_decrypt(rx);
1025                 break;
1026         case WLAN_CIPHER_SUITE_TKIP:
1027                 result = ieee80211_crypto_tkip_decrypt(rx);
1028                 break;
1029         case WLAN_CIPHER_SUITE_CCMP:
1030                 result = ieee80211_crypto_ccmp_decrypt(rx);
1031                 break;
1032         case WLAN_CIPHER_SUITE_AES_CMAC:
1033                 result = ieee80211_crypto_aes_cmac_decrypt(rx);
1034                 break;
1035         default:
1036                 /*
1037                  * We can reach here only with HW-only algorithms
1038                  * but why didn't it decrypt the frame?!
1039                  */
1040                 return RX_DROP_UNUSABLE;
1041         }
1042
1043         /* either the frame has been decrypted or will be dropped */
1044         status->flag |= RX_FLAG_DECRYPTED;
1045
1046         return result;
1047 }
1048
1049 static ieee80211_rx_result debug_noinline
1050 ieee80211_rx_h_check_more_data(struct ieee80211_rx_data *rx)
1051 {
1052         struct ieee80211_local *local;
1053         struct ieee80211_hdr *hdr;
1054         struct sk_buff *skb;
1055
1056         local = rx->local;
1057         skb = rx->skb;
1058         hdr = (struct ieee80211_hdr *) skb->data;
1059
1060         if (!local->pspolling)
1061                 return RX_CONTINUE;
1062
1063         if (!ieee80211_has_fromds(hdr->frame_control))
1064                 /* this is not from AP */
1065                 return RX_CONTINUE;
1066
1067         if (!ieee80211_is_data(hdr->frame_control))
1068                 return RX_CONTINUE;
1069
1070         if (!ieee80211_has_moredata(hdr->frame_control)) {
1071                 /* AP has no more frames buffered for us */
1072                 local->pspolling = false;
1073                 return RX_CONTINUE;
1074         }
1075
1076         /* more data bit is set, let's request a new frame from the AP */
1077         ieee80211_send_pspoll(local, rx->sdata);
1078
1079         return RX_CONTINUE;
1080 }
1081
1082 static void ap_sta_ps_start(struct sta_info *sta)
1083 {
1084         struct ieee80211_sub_if_data *sdata = sta->sdata;
1085         struct ieee80211_local *local = sdata->local;
1086
1087         atomic_inc(&sdata->bss->num_sta_ps);
1088         set_sta_flags(sta, WLAN_STA_PS_STA);
1089         if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
1090                 drv_sta_notify(local, sdata, STA_NOTIFY_SLEEP, &sta->sta);
1091 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1092         printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
1093                sdata->name, sta->sta.addr, sta->sta.aid);
1094 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1095 }
1096
1097 static void ap_sta_ps_end(struct sta_info *sta)
1098 {
1099         struct ieee80211_sub_if_data *sdata = sta->sdata;
1100
1101         atomic_dec(&sdata->bss->num_sta_ps);
1102
1103 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1104         printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n",
1105                sdata->name, sta->sta.addr, sta->sta.aid);
1106 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1107
1108         if (test_sta_flags(sta, WLAN_STA_PS_DRIVER)) {
1109 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
1110                 printk(KERN_DEBUG "%s: STA %pM aid %d driver-ps-blocked\n",
1111                        sdata->name, sta->sta.addr, sta->sta.aid);
1112 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
1113                 return;
1114         }
1115
1116         ieee80211_sta_ps_deliver_wakeup(sta);
1117 }
1118
1119 int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start)
1120 {
1121         struct sta_info *sta_inf = container_of(sta, struct sta_info, sta);
1122         bool in_ps;
1123
1124         WARN_ON(!(sta_inf->local->hw.flags & IEEE80211_HW_AP_LINK_PS));
1125
1126         /* Don't let the same PS state be set twice */
1127         in_ps = test_sta_flags(sta_inf, WLAN_STA_PS_STA);
1128         if ((start && in_ps) || (!start && !in_ps))
1129                 return -EINVAL;
1130
1131         if (start)
1132                 ap_sta_ps_start(sta_inf);
1133         else
1134                 ap_sta_ps_end(sta_inf);
1135
1136         return 0;
1137 }
1138 EXPORT_SYMBOL(ieee80211_sta_ps_transition);
1139
1140 static ieee80211_rx_result debug_noinline
1141 ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
1142 {
1143         struct sta_info *sta = rx->sta;
1144         struct sk_buff *skb = rx->skb;
1145         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
1146         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1147
1148         if (!sta)
1149                 return RX_CONTINUE;
1150
1151         /*
1152          * Update last_rx only for IBSS packets which are for the current
1153          * BSSID to avoid keeping the current IBSS network alive in cases
1154          * where other STAs start using different BSSID.
1155          */
1156         if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) {
1157                 u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
1158                                                 NL80211_IFTYPE_ADHOC);
1159                 if (compare_ether_addr(bssid, rx->sdata->u.ibss.bssid) == 0) {
1160                         sta->last_rx = jiffies;
1161                         if (ieee80211_is_data(hdr->frame_control)) {
1162                                 sta->last_rx_rate_idx = status->rate_idx;
1163                                 sta->last_rx_rate_flag = status->flag;
1164                         }
1165                 }
1166         } else if (!is_multicast_ether_addr(hdr->addr1)) {
1167                 /*
1168                  * Mesh beacons will update last_rx when if they are found to
1169                  * match the current local configuration when processed.
1170                  */
1171                 sta->last_rx = jiffies;
1172                 if (ieee80211_is_data(hdr->frame_control)) {
1173                         sta->last_rx_rate_idx = status->rate_idx;
1174                         sta->last_rx_rate_flag = status->flag;
1175                 }
1176         }
1177
1178         if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
1179                 return RX_CONTINUE;
1180
1181         if (rx->sdata->vif.type == NL80211_IFTYPE_STATION)
1182                 ieee80211_sta_rx_notify(rx->sdata, hdr);
1183
1184         sta->rx_fragments++;
1185         sta->rx_bytes += rx->skb->len;
1186         sta->last_signal = status->signal;
1187         ewma_add(&sta->avg_signal, -status->signal);
1188
1189         /*
1190          * Change STA power saving mode only at the end of a frame
1191          * exchange sequence.
1192          */
1193         if (!(sta->local->hw.flags & IEEE80211_HW_AP_LINK_PS) &&
1194             !ieee80211_has_morefrags(hdr->frame_control) &&
1195             !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) &&
1196             (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
1197              rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
1198                 if (test_sta_flags(sta, WLAN_STA_PS_STA)) {
1199                         /*
1200                          * Ignore doze->wake transitions that are
1201                          * indicated by non-data frames, the standard
1202                          * is unclear here, but for example going to
1203                          * PS mode and then scanning would cause a
1204                          * doze->wake transition for the probe request,
1205                          * and that is clearly undesirable.
1206                          */
1207                         if (ieee80211_is_data(hdr->frame_control) &&
1208                             !ieee80211_has_pm(hdr->frame_control))
1209                                 ap_sta_ps_end(sta);
1210                 } else {
1211                         if (ieee80211_has_pm(hdr->frame_control))
1212                                 ap_sta_ps_start(sta);
1213                 }
1214         }
1215
1216         /*
1217          * Drop (qos-)data::nullfunc frames silently, since they
1218          * are used only to control station power saving mode.
1219          */
1220         if (ieee80211_is_nullfunc(hdr->frame_control) ||
1221             ieee80211_is_qos_nullfunc(hdr->frame_control)) {
1222                 I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc);
1223
1224                 /*
1225                  * If we receive a 4-addr nullfunc frame from a STA
1226                  * that was not moved to a 4-addr STA vlan yet, drop
1227                  * the frame to the monitor interface, to make sure
1228                  * that hostapd sees it
1229                  */
1230                 if (ieee80211_has_a4(hdr->frame_control) &&
1231                     (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
1232                      (rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
1233                       !rx->sdata->u.vlan.sta)))
1234                         return RX_DROP_MONITOR;
1235                 /*
1236                  * Update counter and free packet here to avoid
1237                  * counting this as a dropped packed.
1238                  */
1239                 sta->rx_packets++;
1240                 dev_kfree_skb(rx->skb);
1241                 return RX_QUEUED;
1242         }
1243
1244         return RX_CONTINUE;
1245 } /* ieee80211_rx_h_sta_process */
1246
1247 static inline struct ieee80211_fragment_entry *
1248 ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
1249                          unsigned int frag, unsigned int seq, int rx_queue,
1250                          struct sk_buff **skb)
1251 {
1252         struct ieee80211_fragment_entry *entry;
1253         int idx;
1254
1255         idx = sdata->fragment_next;
1256         entry = &sdata->fragments[sdata->fragment_next++];
1257         if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX)
1258                 sdata->fragment_next = 0;
1259
1260         if (!skb_queue_empty(&entry->skb_list)) {
1261 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1262                 struct ieee80211_hdr *hdr =
1263                         (struct ieee80211_hdr *) entry->skb_list.next->data;
1264                 printk(KERN_DEBUG "%s: RX reassembly removed oldest "
1265                        "fragment entry (idx=%d age=%lu seq=%d last_frag=%d "
1266                        "addr1=%pM addr2=%pM\n",
1267                        sdata->name, idx,
1268                        jiffies - entry->first_frag_time, entry->seq,
1269                        entry->last_frag, hdr->addr1, hdr->addr2);
1270 #endif
1271                 __skb_queue_purge(&entry->skb_list);
1272         }
1273
1274         __skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */
1275         *skb = NULL;
1276         entry->first_frag_time = jiffies;
1277         entry->seq = seq;
1278         entry->rx_queue = rx_queue;
1279         entry->last_frag = frag;
1280         entry->ccmp = 0;
1281         entry->extra_len = 0;
1282
1283         return entry;
1284 }
1285
1286 static inline struct ieee80211_fragment_entry *
1287 ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
1288                           unsigned int frag, unsigned int seq,
1289                           int rx_queue, struct ieee80211_hdr *hdr)
1290 {
1291         struct ieee80211_fragment_entry *entry;
1292         int i, idx;
1293
1294         idx = sdata->fragment_next;
1295         for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
1296                 struct ieee80211_hdr *f_hdr;
1297
1298                 idx--;
1299                 if (idx < 0)
1300                         idx = IEEE80211_FRAGMENT_MAX - 1;
1301
1302                 entry = &sdata->fragments[idx];
1303                 if (skb_queue_empty(&entry->skb_list) || entry->seq != seq ||
1304                     entry->rx_queue != rx_queue ||
1305                     entry->last_frag + 1 != frag)
1306                         continue;
1307
1308                 f_hdr = (struct ieee80211_hdr *)entry->skb_list.next->data;
1309
1310                 /*
1311                  * Check ftype and addresses are equal, else check next fragment
1312                  */
1313                 if (((hdr->frame_control ^ f_hdr->frame_control) &
1314                      cpu_to_le16(IEEE80211_FCTL_FTYPE)) ||
1315                     compare_ether_addr(hdr->addr1, f_hdr->addr1) != 0 ||
1316                     compare_ether_addr(hdr->addr2, f_hdr->addr2) != 0)
1317                         continue;
1318
1319                 if (time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
1320                         __skb_queue_purge(&entry->skb_list);
1321                         continue;
1322                 }
1323                 return entry;
1324         }
1325
1326         return NULL;
1327 }
1328
1329 static ieee80211_rx_result debug_noinline
1330 ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
1331 {
1332         struct ieee80211_hdr *hdr;
1333         u16 sc;
1334         __le16 fc;
1335         unsigned int frag, seq;
1336         struct ieee80211_fragment_entry *entry;
1337         struct sk_buff *skb;
1338         struct ieee80211_rx_status *status;
1339
1340         hdr = (struct ieee80211_hdr *)rx->skb->data;
1341         fc = hdr->frame_control;
1342         sc = le16_to_cpu(hdr->seq_ctrl);
1343         frag = sc & IEEE80211_SCTL_FRAG;
1344
1345         if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
1346                    (rx->skb)->len < 24 ||
1347                    is_multicast_ether_addr(hdr->addr1))) {
1348                 /* not fragmented */
1349                 goto out;
1350         }
1351         I802_DEBUG_INC(rx->local->rx_handlers_fragments);
1352
1353         if (skb_linearize(rx->skb))
1354                 return RX_DROP_UNUSABLE;
1355
1356         /*
1357          *  skb_linearize() might change the skb->data and
1358          *  previously cached variables (in this case, hdr) need to
1359          *  be refreshed with the new data.
1360          */
1361         hdr = (struct ieee80211_hdr *)rx->skb->data;
1362         seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
1363
1364         if (frag == 0) {
1365                 /* This is the first fragment of a new frame. */
1366                 entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
1367                                                  rx->queue, &(rx->skb));
1368                 if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP &&
1369                     ieee80211_has_protected(fc)) {
1370                         int queue = ieee80211_is_mgmt(fc) ?
1371                                 NUM_RX_DATA_QUEUES : rx->queue;
1372                         /* Store CCMP PN so that we can verify that the next
1373                          * fragment has a sequential PN value. */
1374                         entry->ccmp = 1;
1375                         memcpy(entry->last_pn,
1376                                rx->key->u.ccmp.rx_pn[queue],
1377                                CCMP_PN_LEN);
1378                 }
1379                 return RX_QUEUED;
1380         }
1381
1382         /* This is a fragment for a frame that should already be pending in
1383          * fragment cache. Add this fragment to the end of the pending entry.
1384          */
1385         entry = ieee80211_reassemble_find(rx->sdata, frag, seq, rx->queue, hdr);
1386         if (!entry) {
1387                 I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
1388                 return RX_DROP_MONITOR;
1389         }
1390
1391         /* Verify that MPDUs within one MSDU have sequential PN values.
1392          * (IEEE 802.11i, 8.3.3.4.5) */
1393         if (entry->ccmp) {
1394                 int i;
1395                 u8 pn[CCMP_PN_LEN], *rpn;
1396                 int queue;
1397                 if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP)
1398                         return RX_DROP_UNUSABLE;
1399                 memcpy(pn, entry->last_pn, CCMP_PN_LEN);
1400                 for (i = CCMP_PN_LEN - 1; i >= 0; i--) {
1401                         pn[i]++;
1402                         if (pn[i])
1403                                 break;
1404                 }
1405                 queue = ieee80211_is_mgmt(fc) ?
1406                         NUM_RX_DATA_QUEUES : rx->queue;
1407                 rpn = rx->key->u.ccmp.rx_pn[queue];
1408                 if (memcmp(pn, rpn, CCMP_PN_LEN))
1409                         return RX_DROP_UNUSABLE;
1410                 memcpy(entry->last_pn, pn, CCMP_PN_LEN);
1411         }
1412
1413         skb_pull(rx->skb, ieee80211_hdrlen(fc));
1414         __skb_queue_tail(&entry->skb_list, rx->skb);
1415         entry->last_frag = frag;
1416         entry->extra_len += rx->skb->len;
1417         if (ieee80211_has_morefrags(fc)) {
1418                 rx->skb = NULL;
1419                 return RX_QUEUED;
1420         }
1421
1422         rx->skb = __skb_dequeue(&entry->skb_list);
1423         if (skb_tailroom(rx->skb) < entry->extra_len) {
1424                 I802_DEBUG_INC(rx->local->rx_expand_skb_head2);
1425                 if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
1426                                               GFP_ATOMIC))) {
1427                         I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
1428                         __skb_queue_purge(&entry->skb_list);
1429                         return RX_DROP_UNUSABLE;
1430                 }
1431         }
1432         while ((skb = __skb_dequeue(&entry->skb_list))) {
1433                 memcpy(skb_put(rx->skb, skb->len), skb->data, skb->len);
1434                 dev_kfree_skb(skb);
1435         }
1436
1437         /* Complete frame has been reassembled - process it now */
1438         status = IEEE80211_SKB_RXCB(rx->skb);
1439         status->rx_flags |= IEEE80211_RX_FRAGMENTED;
1440
1441  out:
1442         if (rx->sta)
1443                 rx->sta->rx_packets++;
1444         if (is_multicast_ether_addr(hdr->addr1))
1445                 rx->local->dot11MulticastReceivedFrameCount++;
1446         else
1447                 ieee80211_led_rx(rx->local);
1448         return RX_CONTINUE;
1449 }
1450
1451 static ieee80211_rx_result debug_noinline
1452 ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
1453 {
1454         struct ieee80211_sub_if_data *sdata = rx->sdata;
1455         __le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control;
1456         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
1457
1458         if (likely(!rx->sta || !ieee80211_is_pspoll(fc) ||
1459                    !(status->rx_flags & IEEE80211_RX_RA_MATCH)))
1460                 return RX_CONTINUE;
1461
1462         if ((sdata->vif.type != NL80211_IFTYPE_AP) &&
1463             (sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
1464                 return RX_DROP_UNUSABLE;
1465
1466         if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
1467                 ieee80211_sta_ps_deliver_poll_response(rx->sta);
1468         else
1469                 set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
1470
1471         /* Free PS Poll skb here instead of returning RX_DROP that would
1472          * count as an dropped frame. */
1473         dev_kfree_skb(rx->skb);
1474
1475         return RX_QUEUED;
1476 }
1477
1478 static ieee80211_rx_result debug_noinline
1479 ieee80211_rx_h_remove_qos_control(struct ieee80211_rx_data *rx)
1480 {
1481         u8 *data = rx->skb->data;
1482         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)data;
1483
1484         if (!ieee80211_is_data_qos(hdr->frame_control))
1485                 return RX_CONTINUE;
1486
1487         /* remove the qos control field, update frame type and meta-data */
1488         memmove(data + IEEE80211_QOS_CTL_LEN, data,
1489                 ieee80211_hdrlen(hdr->frame_control) - IEEE80211_QOS_CTL_LEN);
1490         hdr = (struct ieee80211_hdr *)skb_pull(rx->skb, IEEE80211_QOS_CTL_LEN);
1491         /* change frame type to non QOS */
1492         hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
1493
1494         return RX_CONTINUE;
1495 }
1496
1497 static int
1498 ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
1499 {
1500         if (unlikely(!rx->sta ||
1501             !test_sta_flags(rx->sta, WLAN_STA_AUTHORIZED)))
1502                 return -EACCES;
1503
1504         return 0;
1505 }
1506
1507 static int
1508 ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
1509 {
1510         struct sk_buff *skb = rx->skb;
1511         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
1512
1513         /*
1514          * Pass through unencrypted frames if the hardware has
1515          * decrypted them already.
1516          */
1517         if (status->flag & RX_FLAG_DECRYPTED)
1518                 return 0;
1519
1520         /* Drop unencrypted frames if key is set. */
1521         if (unlikely(!ieee80211_has_protected(fc) &&
1522                      !ieee80211_is_nullfunc(fc) &&
1523                      ieee80211_is_data(fc) &&
1524                      (rx->key || rx->sdata->drop_unencrypted)))
1525                 return -EACCES;
1526
1527         return 0;
1528 }
1529
1530 static int
1531 ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
1532 {
1533         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
1534         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
1535         __le16 fc = hdr->frame_control;
1536
1537         /*
1538          * Pass through unencrypted frames if the hardware has
1539          * decrypted them already.
1540          */
1541         if (status->flag & RX_FLAG_DECRYPTED)
1542                 return 0;
1543
1544         if (rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP)) {
1545                 if (unlikely(!ieee80211_has_protected(fc) &&
1546                              ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
1547                              rx->key)) {
1548                         if (ieee80211_is_deauth(fc))
1549                                 cfg80211_send_unprot_deauth(rx->sdata->dev,
1550                                                             rx->skb->data,
1551                                                             rx->skb->len);
1552                         else if (ieee80211_is_disassoc(fc))
1553                                 cfg80211_send_unprot_disassoc(rx->sdata->dev,
1554                                                               rx->skb->data,
1555                                                               rx->skb->len);
1556                         return -EACCES;
1557                 }
1558                 /* BIP does not use Protected field, so need to check MMIE */
1559                 if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
1560                              ieee80211_get_mmie_keyidx(rx->skb) < 0)) {
1561                         if (ieee80211_is_deauth(fc))
1562                                 cfg80211_send_unprot_deauth(rx->sdata->dev,
1563                                                             rx->skb->data,
1564                                                             rx->skb->len);
1565                         else if (ieee80211_is_disassoc(fc))
1566                                 cfg80211_send_unprot_disassoc(rx->sdata->dev,
1567                                                               rx->skb->data,
1568                                                               rx->skb->len);
1569                         return -EACCES;
1570                 }
1571                 /*
1572                  * When using MFP, Action frames are not allowed prior to
1573                  * having configured keys.
1574                  */
1575                 if (unlikely(ieee80211_is_action(fc) && !rx->key &&
1576                              ieee80211_is_robust_mgmt_frame(
1577                                      (struct ieee80211_hdr *) rx->skb->data)))
1578                         return -EACCES;
1579         }
1580
1581         return 0;
1582 }
1583
1584 static int
1585 __ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
1586 {
1587         struct ieee80211_sub_if_data *sdata = rx->sdata;
1588         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
1589         bool check_port_control = false;
1590         struct ethhdr *ehdr;
1591         int ret;
1592
1593         if (ieee80211_has_a4(hdr->frame_control) &&
1594             sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta)
1595                 return -1;
1596
1597         if (sdata->vif.type == NL80211_IFTYPE_STATION &&
1598             !!sdata->u.mgd.use_4addr != !!ieee80211_has_a4(hdr->frame_control)) {
1599
1600                 if (!sdata->u.mgd.use_4addr)
1601                         return -1;
1602                 else
1603                         check_port_control = true;
1604         }
1605
1606         if (is_multicast_ether_addr(hdr->addr1) &&
1607             sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta)
1608                 return -1;
1609
1610         ret = ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type);
1611         if (ret < 0 || !check_port_control)
1612                 return ret;
1613
1614         ehdr = (struct ethhdr *) rx->skb->data;
1615         if (ehdr->h_proto != rx->sdata->control_port_protocol)
1616                 return -1;
1617
1618         return 0;
1619 }
1620
1621 /*
1622  * requires that rx->skb is a frame with ethernet header
1623  */
1624 static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc)
1625 {
1626         static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
1627                 = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
1628         struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
1629
1630         /*
1631          * Allow EAPOL frames to us/the PAE group address regardless
1632          * of whether the frame was encrypted or not.
1633          */
1634         if (ehdr->h_proto == rx->sdata->control_port_protocol &&
1635             (compare_ether_addr(ehdr->h_dest, rx->sdata->vif.addr) == 0 ||
1636              compare_ether_addr(ehdr->h_dest, pae_group_addr) == 0))
1637                 return true;
1638
1639         if (ieee80211_802_1x_port_control(rx) ||
1640             ieee80211_drop_unencrypted(rx, fc))
1641                 return false;
1642
1643         return true;
1644 }
1645
1646 /*
1647  * requires that rx->skb is a frame with ethernet header
1648  */
1649 static void
1650 ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
1651 {
1652         struct ieee80211_sub_if_data *sdata = rx->sdata;
1653         struct net_device *dev = sdata->dev;
1654         struct sk_buff *skb, *xmit_skb;
1655         struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
1656         struct sta_info *dsta;
1657         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
1658
1659         skb = rx->skb;
1660         xmit_skb = NULL;
1661
1662         if ((sdata->vif.type == NL80211_IFTYPE_AP ||
1663              sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
1664             !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
1665             (status->rx_flags & IEEE80211_RX_RA_MATCH) &&
1666             (sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) {
1667                 if (is_multicast_ether_addr(ehdr->h_dest)) {
1668                         /*
1669                          * send multicast frames both to higher layers in
1670                          * local net stack and back to the wireless medium
1671                          */
1672                         xmit_skb = skb_copy(skb, GFP_ATOMIC);
1673                         if (!xmit_skb && net_ratelimit())
1674                                 printk(KERN_DEBUG "%s: failed to clone "
1675                                        "multicast frame\n", dev->name);
1676                 } else {
1677                         dsta = sta_info_get(sdata, skb->data);
1678                         if (dsta) {
1679                                 /*
1680                                  * The destination station is associated to
1681                                  * this AP (in this VLAN), so send the frame
1682                                  * directly to it and do not pass it to local
1683                                  * net stack.
1684                                  */
1685                                 xmit_skb = skb;
1686                                 skb = NULL;
1687                         }
1688                 }
1689         }
1690
1691         if (skb) {
1692                 int align __maybe_unused;
1693
1694 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
1695                 /*
1696                  * 'align' will only take the values 0 or 2 here
1697                  * since all frames are required to be aligned
1698                  * to 2-byte boundaries when being passed to
1699                  * mac80211. That also explains the __skb_push()
1700                  * below.
1701                  */
1702                 align = ((unsigned long)(skb->data + sizeof(struct ethhdr))) & 3;
1703                 if (align) {
1704                         if (WARN_ON(skb_headroom(skb) < 3)) {
1705                                 dev_kfree_skb(skb);
1706                                 skb = NULL;
1707                         } else {
1708                                 u8 *data = skb->data;
1709                                 size_t len = skb_headlen(skb);
1710                                 skb->data -= align;
1711                                 memmove(skb->data, data, len);
1712                                 skb_set_tail_pointer(skb, len);
1713                         }
1714                 }
1715 #endif
1716
1717                 if (skb) {
1718                         /* deliver to local stack */
1719                         skb->protocol = eth_type_trans(skb, dev);
1720                         memset(skb->cb, 0, sizeof(skb->cb));
1721                         netif_receive_skb(skb);
1722                 }
1723         }
1724
1725         if (xmit_skb) {
1726                 /* send to wireless media */
1727                 xmit_skb->protocol = htons(ETH_P_802_3);
1728                 skb_reset_network_header(xmit_skb);
1729                 skb_reset_mac_header(xmit_skb);
1730                 dev_queue_xmit(xmit_skb);
1731         }
1732 }
1733
1734 static ieee80211_rx_result debug_noinline
1735 ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
1736 {
1737         struct net_device *dev = rx->sdata->dev;
1738         struct sk_buff *skb = rx->skb;
1739         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1740         __le16 fc = hdr->frame_control;
1741         struct sk_buff_head frame_list;
1742         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
1743
1744         if (unlikely(!ieee80211_is_data(fc)))
1745                 return RX_CONTINUE;
1746
1747         if (unlikely(!ieee80211_is_data_present(fc)))
1748                 return RX_DROP_MONITOR;
1749
1750         if (!(status->rx_flags & IEEE80211_RX_AMSDU))
1751                 return RX_CONTINUE;
1752
1753         if (ieee80211_has_a4(hdr->frame_control) &&
1754             rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
1755             !rx->sdata->u.vlan.sta)
1756                 return RX_DROP_UNUSABLE;
1757
1758         if (is_multicast_ether_addr(hdr->addr1) &&
1759             ((rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
1760               rx->sdata->u.vlan.sta) ||
1761              (rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
1762               rx->sdata->u.mgd.use_4addr)))
1763                 return RX_DROP_UNUSABLE;
1764
1765         skb->dev = dev;
1766         __skb_queue_head_init(&frame_list);
1767
1768         if (skb_linearize(skb))
1769                 return RX_DROP_UNUSABLE;
1770
1771         ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
1772                                  rx->sdata->vif.type,
1773                                  rx->local->hw.extra_tx_headroom);
1774
1775         while (!skb_queue_empty(&frame_list)) {
1776                 rx->skb = __skb_dequeue(&frame_list);
1777
1778                 if (!ieee80211_frame_allowed(rx, fc)) {
1779                         dev_kfree_skb(rx->skb);
1780                         continue;
1781                 }
1782                 dev->stats.rx_packets++;
1783                 dev->stats.rx_bytes += rx->skb->len;
1784
1785                 ieee80211_deliver_skb(rx);
1786         }
1787
1788         return RX_QUEUED;
1789 }
1790
1791 #ifdef CONFIG_MAC80211_MESH
1792 static ieee80211_rx_result
1793 ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
1794 {
1795         struct ieee80211_hdr *hdr;
1796         struct ieee80211s_hdr *mesh_hdr;
1797         unsigned int hdrlen;
1798         struct sk_buff *skb = rx->skb, *fwd_skb;
1799         struct ieee80211_local *local = rx->local;
1800         struct ieee80211_sub_if_data *sdata = rx->sdata;
1801         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
1802
1803         hdr = (struct ieee80211_hdr *) skb->data;
1804         hdrlen = ieee80211_hdrlen(hdr->frame_control);
1805         mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
1806
1807         if (!ieee80211_is_data(hdr->frame_control))
1808                 return RX_CONTINUE;
1809
1810         if (!mesh_hdr->ttl)
1811                 /* illegal frame */
1812                 return RX_DROP_MONITOR;
1813
1814         if (mesh_hdr->flags & MESH_FLAGS_AE) {
1815                 struct mesh_path *mppath;
1816                 char *proxied_addr;
1817                 char *mpp_addr;
1818
1819                 if (is_multicast_ether_addr(hdr->addr1)) {
1820                         mpp_addr = hdr->addr3;
1821                         proxied_addr = mesh_hdr->eaddr1;
1822                 } else {
1823                         mpp_addr = hdr->addr4;
1824                         proxied_addr = mesh_hdr->eaddr2;
1825                 }
1826
1827                 rcu_read_lock();
1828                 mppath = mpp_path_lookup(proxied_addr, sdata);
1829                 if (!mppath) {
1830                         mpp_path_add(proxied_addr, mpp_addr, sdata);
1831                 } else {
1832                         spin_lock_bh(&mppath->state_lock);
1833                         if (compare_ether_addr(mppath->mpp, mpp_addr) != 0)
1834                                 memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
1835                         spin_unlock_bh(&mppath->state_lock);
1836                 }
1837                 rcu_read_unlock();
1838         }
1839
1840         /* Frame has reached destination.  Don't forward */
1841         if (!is_multicast_ether_addr(hdr->addr1) &&
1842             compare_ether_addr(sdata->vif.addr, hdr->addr3) == 0)
1843                 return RX_CONTINUE;
1844
1845         mesh_hdr->ttl--;
1846
1847         if (status->rx_flags & IEEE80211_RX_RA_MATCH) {
1848                 if (!mesh_hdr->ttl)
1849                         IEEE80211_IFSTA_MESH_CTR_INC(&rx->sdata->u.mesh,
1850                                                      dropped_frames_ttl);
1851                 else {
1852                         struct ieee80211_hdr *fwd_hdr;
1853                         struct ieee80211_tx_info *info;
1854
1855                         fwd_skb = skb_copy(skb, GFP_ATOMIC);
1856
1857                         if (!fwd_skb && net_ratelimit())
1858                                 printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
1859                                                    sdata->name);
1860                         if (!fwd_skb)
1861                                 goto out;
1862
1863                         fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data;
1864                         memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
1865                         info = IEEE80211_SKB_CB(fwd_skb);
1866                         memset(info, 0, sizeof(*info));
1867                         info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
1868                         info->control.vif = &rx->sdata->vif;
1869                         skb_set_queue_mapping(skb,
1870                                 ieee80211_select_queue(rx->sdata, fwd_skb));
1871                         ieee80211_set_qos_hdr(local, skb);
1872                         if (is_multicast_ether_addr(fwd_hdr->addr1))
1873                                 IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
1874                                                                 fwded_mcast);
1875                         else {
1876                                 int err;
1877                                 /*
1878                                  * Save TA to addr1 to send TA a path error if a
1879                                  * suitable next hop is not found
1880                                  */
1881                                 memcpy(fwd_hdr->addr1, fwd_hdr->addr2,
1882                                                 ETH_ALEN);
1883                                 err = mesh_nexthop_lookup(fwd_skb, sdata);
1884                                 /* Failed to immediately resolve next hop:
1885                                  * fwded frame was dropped or will be added
1886                                  * later to the pending skb queue.  */
1887                                 if (err)
1888                                         return RX_DROP_MONITOR;
1889
1890                                 IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
1891                                                                 fwded_unicast);
1892                         }
1893                         IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
1894                                                      fwded_frames);
1895                         ieee80211_add_pending_skb(local, fwd_skb);
1896                 }
1897         }
1898
1899  out:
1900         if (is_multicast_ether_addr(hdr->addr1) ||
1901             sdata->dev->flags & IFF_PROMISC)
1902                 return RX_CONTINUE;
1903         else
1904                 return RX_DROP_MONITOR;
1905 }
1906 #endif
1907
1908 static ieee80211_rx_result debug_noinline
1909 ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
1910 {
1911         struct ieee80211_sub_if_data *sdata = rx->sdata;
1912         struct ieee80211_local *local = rx->local;
1913         struct net_device *dev = sdata->dev;
1914         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
1915         __le16 fc = hdr->frame_control;
1916         int err;
1917
1918         if (unlikely(!ieee80211_is_data(hdr->frame_control)))
1919                 return RX_CONTINUE;
1920
1921         if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
1922                 return RX_DROP_MONITOR;
1923
1924         /*
1925          * Allow the cooked monitor interface of an AP to see 4-addr frames so
1926          * that a 4-addr station can be detected and moved into a separate VLAN
1927          */
1928         if (ieee80211_has_a4(hdr->frame_control) &&
1929             sdata->vif.type == NL80211_IFTYPE_AP)
1930                 return RX_DROP_MONITOR;
1931
1932         err = __ieee80211_data_to_8023(rx);
1933         if (unlikely(err))
1934                 return RX_DROP_UNUSABLE;
1935
1936         if (!ieee80211_frame_allowed(rx, fc))
1937                 return RX_DROP_MONITOR;
1938
1939         rx->skb->dev = dev;
1940
1941         dev->stats.rx_packets++;
1942         dev->stats.rx_bytes += rx->skb->len;
1943
1944         if (local->ps_sdata && local->hw.conf.dynamic_ps_timeout > 0 &&
1945             !is_multicast_ether_addr(
1946                     ((struct ethhdr *)rx->skb->data)->h_dest) &&
1947             (!local->scanning &&
1948              !test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state))) {
1949                         mod_timer(&local->dynamic_ps_timer, jiffies +
1950                          msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
1951         }
1952
1953         ieee80211_deliver_skb(rx);
1954
1955         return RX_QUEUED;
1956 }
1957
1958 static ieee80211_rx_result debug_noinline
1959 ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
1960 {
1961         struct ieee80211_local *local = rx->local;
1962         struct ieee80211_hw *hw = &local->hw;
1963         struct sk_buff *skb = rx->skb;
1964         struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data;
1965         struct tid_ampdu_rx *tid_agg_rx;
1966         u16 start_seq_num;
1967         u16 tid;
1968
1969         if (likely(!ieee80211_is_ctl(bar->frame_control)))
1970                 return RX_CONTINUE;
1971
1972         if (ieee80211_is_back_req(bar->frame_control)) {
1973                 struct {
1974                         __le16 control, start_seq_num;
1975                 } __packed bar_data;
1976
1977                 if (!rx->sta)
1978                         return RX_DROP_MONITOR;
1979
1980                 if (skb_copy_bits(skb, offsetof(struct ieee80211_bar, control),
1981                                   &bar_data, sizeof(bar_data)))
1982                         return RX_DROP_MONITOR;
1983
1984                 tid = le16_to_cpu(bar_data.control) >> 12;
1985
1986                 tid_agg_rx = rcu_dereference(rx->sta->ampdu_mlme.tid_rx[tid]);
1987                 if (!tid_agg_rx)
1988                         return RX_DROP_MONITOR;
1989
1990                 start_seq_num = le16_to_cpu(bar_data.start_seq_num) >> 4;
1991
1992                 /* reset session timer */
1993                 if (tid_agg_rx->timeout)
1994                         mod_timer(&tid_agg_rx->session_timer,
1995                                   TU_TO_EXP_TIME(tid_agg_rx->timeout));
1996
1997                 spin_lock(&tid_agg_rx->reorder_lock);
1998                 /* release stored frames up to start of BAR */
1999                 ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num);
2000                 spin_unlock(&tid_agg_rx->reorder_lock);
2001
2002                 kfree_skb(skb);
2003                 return RX_QUEUED;
2004         }
2005
2006         /*
2007          * After this point, we only want management frames,
2008          * so we can drop all remaining control frames to
2009          * cooked monitor interfaces.
2010          */
2011         return RX_DROP_MONITOR;
2012 }
2013
2014 static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata,
2015                                            struct ieee80211_mgmt *mgmt,
2016                                            size_t len)
2017 {
2018         struct ieee80211_local *local = sdata->local;
2019         struct sk_buff *skb;
2020         struct ieee80211_mgmt *resp;
2021
2022         if (compare_ether_addr(mgmt->da, sdata->vif.addr) != 0) {
2023                 /* Not to own unicast address */
2024                 return;
2025         }
2026
2027         if (compare_ether_addr(mgmt->sa, sdata->u.mgd.bssid) != 0 ||
2028             compare_ether_addr(mgmt->bssid, sdata->u.mgd.bssid) != 0) {
2029                 /* Not from the current AP or not associated yet. */
2030                 return;
2031         }
2032
2033         if (len < 24 + 1 + sizeof(resp->u.action.u.sa_query)) {
2034                 /* Too short SA Query request frame */
2035                 return;
2036         }
2037
2038         skb = dev_alloc_skb(sizeof(*resp) + local->hw.extra_tx_headroom);
2039         if (skb == NULL)
2040                 return;
2041
2042         skb_reserve(skb, local->hw.extra_tx_headroom);
2043         resp = (struct ieee80211_mgmt *) skb_put(skb, 24);
2044         memset(resp, 0, 24);
2045         memcpy(resp->da, mgmt->sa, ETH_ALEN);
2046         memcpy(resp->sa, sdata->vif.addr, ETH_ALEN);
2047         memcpy(resp->bssid, sdata->u.mgd.bssid, ETH_ALEN);
2048         resp->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
2049                                           IEEE80211_STYPE_ACTION);
2050         skb_put(skb, 1 + sizeof(resp->u.action.u.sa_query));
2051         resp->u.action.category = WLAN_CATEGORY_SA_QUERY;
2052         resp->u.action.u.sa_query.action = WLAN_ACTION_SA_QUERY_RESPONSE;
2053         memcpy(resp->u.action.u.sa_query.trans_id,
2054                mgmt->u.action.u.sa_query.trans_id,
2055                WLAN_SA_QUERY_TR_ID_LEN);
2056
2057         ieee80211_tx_skb(sdata, skb);
2058 }
2059
2060 static ieee80211_rx_result debug_noinline
2061 ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx)
2062 {
2063         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
2064         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
2065
2066         /*
2067          * From here on, look only at management frames.
2068          * Data and control frames are already handled,
2069          * and unknown (reserved) frames are useless.
2070          */
2071         if (rx->skb->len < 24)
2072                 return RX_DROP_MONITOR;
2073
2074         if (!ieee80211_is_mgmt(mgmt->frame_control))
2075                 return RX_DROP_MONITOR;
2076
2077         if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
2078                 return RX_DROP_MONITOR;
2079
2080         if (ieee80211_drop_unencrypted_mgmt(rx))
2081                 return RX_DROP_UNUSABLE;
2082
2083         return RX_CONTINUE;
2084 }
2085
2086 static ieee80211_rx_result debug_noinline
2087 ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
2088 {
2089         struct ieee80211_local *local = rx->local;
2090         struct ieee80211_sub_if_data *sdata = rx->sdata;
2091         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
2092         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
2093         int len = rx->skb->len;
2094
2095         if (!ieee80211_is_action(mgmt->frame_control))
2096                 return RX_CONTINUE;
2097
2098         /* drop too small frames */
2099         if (len < IEEE80211_MIN_ACTION_SIZE)
2100                 return RX_DROP_UNUSABLE;
2101
2102         if (!rx->sta && mgmt->u.action.category != WLAN_CATEGORY_PUBLIC)
2103                 return RX_DROP_UNUSABLE;
2104
2105         if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
2106                 return RX_DROP_UNUSABLE;
2107
2108         switch (mgmt->u.action.category) {
2109         case WLAN_CATEGORY_BACK:
2110                 /*
2111                  * The aggregation code is not prepared to handle
2112                  * anything but STA/AP due to the BSSID handling;
2113                  * IBSS could work in the code but isn't supported
2114                  * by drivers or the standard.
2115                  */
2116                 if (sdata->vif.type != NL80211_IFTYPE_STATION &&
2117                     sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
2118                     sdata->vif.type != NL80211_IFTYPE_AP)
2119                         break;
2120
2121                 /* verify action_code is present */
2122                 if (len < IEEE80211_MIN_ACTION_SIZE + 1)
2123                         break;
2124
2125                 switch (mgmt->u.action.u.addba_req.action_code) {
2126                 case WLAN_ACTION_ADDBA_REQ:
2127                         if (len < (IEEE80211_MIN_ACTION_SIZE +
2128                                    sizeof(mgmt->u.action.u.addba_req)))
2129                                 goto invalid;
2130                         break;
2131                 case WLAN_ACTION_ADDBA_RESP:
2132                         if (len < (IEEE80211_MIN_ACTION_SIZE +
2133                                    sizeof(mgmt->u.action.u.addba_resp)))
2134                                 goto invalid;
2135                         break;
2136                 case WLAN_ACTION_DELBA:
2137                         if (len < (IEEE80211_MIN_ACTION_SIZE +
2138                                    sizeof(mgmt->u.action.u.delba)))
2139                                 goto invalid;
2140                         break;
2141                 default:
2142                         goto invalid;
2143                 }
2144
2145                 goto queue;
2146         case WLAN_CATEGORY_SPECTRUM_MGMT:
2147                 if (local->hw.conf.channel->band != IEEE80211_BAND_5GHZ)
2148                         break;
2149
2150                 if (sdata->vif.type != NL80211_IFTYPE_STATION)
2151                         break;
2152
2153                 /* verify action_code is present */
2154                 if (len < IEEE80211_MIN_ACTION_SIZE + 1)
2155                         break;
2156
2157                 switch (mgmt->u.action.u.measurement.action_code) {
2158                 case WLAN_ACTION_SPCT_MSR_REQ:
2159                         if (len < (IEEE80211_MIN_ACTION_SIZE +
2160                                    sizeof(mgmt->u.action.u.measurement)))
2161                                 break;
2162                         ieee80211_process_measurement_req(sdata, mgmt, len);
2163                         goto handled;
2164                 case WLAN_ACTION_SPCT_CHL_SWITCH:
2165                         if (len < (IEEE80211_MIN_ACTION_SIZE +
2166                                    sizeof(mgmt->u.action.u.chan_switch)))
2167                                 break;
2168
2169                         if (sdata->vif.type != NL80211_IFTYPE_STATION)
2170                                 break;
2171
2172                         if (memcmp(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN))
2173                                 break;
2174
2175                         goto queue;
2176                 }
2177                 break;
2178         case WLAN_CATEGORY_SA_QUERY:
2179                 if (len < (IEEE80211_MIN_ACTION_SIZE +
2180                            sizeof(mgmt->u.action.u.sa_query)))
2181                         break;
2182
2183                 switch (mgmt->u.action.u.sa_query.action) {
2184                 case WLAN_ACTION_SA_QUERY_REQUEST:
2185                         if (sdata->vif.type != NL80211_IFTYPE_STATION)
2186                                 break;
2187                         ieee80211_process_sa_query_req(sdata, mgmt, len);
2188                         goto handled;
2189                 }
2190                 break;
2191         case WLAN_CATEGORY_MESH_PLINK:
2192                 if (!ieee80211_vif_is_mesh(&sdata->vif))
2193                         break;
2194                 goto queue;
2195         case WLAN_CATEGORY_MESH_PATH_SEL:
2196                 if (!mesh_path_sel_is_hwmp(sdata))
2197                         break;
2198                 goto queue;
2199         }
2200
2201         return RX_CONTINUE;
2202
2203  invalid:
2204         status->rx_flags |= IEEE80211_RX_MALFORMED_ACTION_FRM;
2205         /* will return in the next handlers */
2206         return RX_CONTINUE;
2207
2208  handled:
2209         if (rx->sta)
2210                 rx->sta->rx_packets++;
2211         dev_kfree_skb(rx->skb);
2212         return RX_QUEUED;
2213
2214  queue:
2215         rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
2216         skb_queue_tail(&sdata->skb_queue, rx->skb);
2217         ieee80211_queue_work(&local->hw, &sdata->work);
2218         if (rx->sta)
2219                 rx->sta->rx_packets++;
2220         return RX_QUEUED;
2221 }
2222
2223 static ieee80211_rx_result debug_noinline
2224 ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx)
2225 {
2226         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
2227
2228         /* skip known-bad action frames and return them in the next handler */
2229         if (status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM)
2230                 return RX_CONTINUE;
2231
2232         /*
2233          * Getting here means the kernel doesn't know how to handle
2234          * it, but maybe userspace does ... include returned frames
2235          * so userspace can register for those to know whether ones
2236          * it transmitted were processed or returned.
2237          */
2238
2239         if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq,
2240                              rx->skb->data, rx->skb->len,
2241                              GFP_ATOMIC)) {
2242                 if (rx->sta)
2243                         rx->sta->rx_packets++;
2244                 dev_kfree_skb(rx->skb);
2245                 return RX_QUEUED;
2246         }
2247
2248
2249         return RX_CONTINUE;
2250 }
2251
2252 static ieee80211_rx_result debug_noinline
2253 ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx)
2254 {
2255         struct ieee80211_local *local = rx->local;
2256         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
2257         struct sk_buff *nskb;
2258         struct ieee80211_sub_if_data *sdata = rx->sdata;
2259         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
2260
2261         if (!ieee80211_is_action(mgmt->frame_control))
2262                 return RX_CONTINUE;
2263
2264         /*
2265          * For AP mode, hostapd is responsible for handling any action
2266          * frames that we didn't handle, including returning unknown
2267          * ones. For all other modes we will return them to the sender,
2268          * setting the 0x80 bit in the action category, as required by
2269          * 802.11-2007 7.3.1.11.
2270          * Newer versions of hostapd shall also use the management frame
2271          * registration mechanisms, but older ones still use cooked
2272          * monitor interfaces so push all frames there.
2273          */
2274         if (!(status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM) &&
2275             (sdata->vif.type == NL80211_IFTYPE_AP ||
2276              sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
2277                 return RX_DROP_MONITOR;
2278
2279         /* do not return rejected action frames */
2280         if (mgmt->u.action.category & 0x80)
2281                 return RX_DROP_UNUSABLE;
2282
2283         nskb = skb_copy_expand(rx->skb, local->hw.extra_tx_headroom, 0,
2284                                GFP_ATOMIC);
2285         if (nskb) {
2286                 struct ieee80211_mgmt *nmgmt = (void *)nskb->data;
2287
2288                 nmgmt->u.action.category |= 0x80;
2289                 memcpy(nmgmt->da, nmgmt->sa, ETH_ALEN);
2290                 memcpy(nmgmt->sa, rx->sdata->vif.addr, ETH_ALEN);
2291
2292                 memset(nskb->cb, 0, sizeof(nskb->cb));
2293
2294                 ieee80211_tx_skb(rx->sdata, nskb);
2295         }
2296         dev_kfree_skb(rx->skb);
2297         return RX_QUEUED;
2298 }
2299
2300 static ieee80211_rx_result debug_noinline
2301 ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
2302 {
2303         struct ieee80211_sub_if_data *sdata = rx->sdata;
2304         ieee80211_rx_result rxs;
2305         struct ieee80211_mgmt *mgmt = (void *)rx->skb->data;
2306         __le16 stype;
2307
2308         rxs = ieee80211_work_rx_mgmt(rx->sdata, rx->skb);
2309         if (rxs != RX_CONTINUE)
2310                 return rxs;
2311
2312         stype = mgmt->frame_control & cpu_to_le16(IEEE80211_FCTL_STYPE);
2313
2314         if (!ieee80211_vif_is_mesh(&sdata->vif) &&
2315             sdata->vif.type != NL80211_IFTYPE_ADHOC &&
2316             sdata->vif.type != NL80211_IFTYPE_STATION)
2317                 return RX_DROP_MONITOR;
2318
2319         switch (stype) {
2320         case cpu_to_le16(IEEE80211_STYPE_BEACON):
2321         case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
2322                 /* process for all: mesh, mlme, ibss */
2323                 break;
2324         case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
2325         case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
2326                 if (is_multicast_ether_addr(mgmt->da) &&
2327                     !is_broadcast_ether_addr(mgmt->da))
2328                         return RX_DROP_MONITOR;
2329
2330                 /* process only for station */
2331                 if (sdata->vif.type != NL80211_IFTYPE_STATION)
2332                         return RX_DROP_MONITOR;
2333                 break;
2334         case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ):
2335         case cpu_to_le16(IEEE80211_STYPE_AUTH):
2336                 /* process only for ibss */
2337                 if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
2338                         return RX_DROP_MONITOR;
2339                 break;
2340         default:
2341                 return RX_DROP_MONITOR;
2342         }
2343
2344         /* queue up frame and kick off work to process it */
2345         rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
2346         skb_queue_tail(&sdata->skb_queue, rx->skb);
2347         ieee80211_queue_work(&rx->local->hw, &sdata->work);
2348         if (rx->sta)
2349                 rx->sta->rx_packets++;
2350
2351         return RX_QUEUED;
2352 }
2353
2354 static void ieee80211_rx_michael_mic_report(struct ieee80211_hdr *hdr,
2355                                             struct ieee80211_rx_data *rx)
2356 {
2357         int keyidx;
2358         unsigned int hdrlen;
2359
2360         hdrlen = ieee80211_hdrlen(hdr->frame_control);
2361         if (rx->skb->len >= hdrlen + 4)
2362                 keyidx = rx->skb->data[hdrlen + 3] >> 6;
2363         else
2364                 keyidx = -1;
2365
2366         if (!rx->sta) {
2367                 /*
2368                  * Some hardware seem to generate incorrect Michael MIC
2369                  * reports; ignore them to avoid triggering countermeasures.
2370                  */
2371                 return;
2372         }
2373
2374         if (!ieee80211_has_protected(hdr->frame_control))
2375                 return;
2376
2377         if (rx->sdata->vif.type == NL80211_IFTYPE_AP && keyidx) {
2378                 /*
2379                  * APs with pairwise keys should never receive Michael MIC
2380                  * errors for non-zero keyidx because these are reserved for
2381                  * group keys and only the AP is sending real multicast
2382                  * frames in the BSS.
2383                  */
2384                 return;
2385         }
2386
2387         if (!ieee80211_is_data(hdr->frame_control) &&
2388             !ieee80211_is_auth(hdr->frame_control))
2389                 return;
2390
2391         mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL,
2392                                         GFP_ATOMIC);
2393 }
2394
2395 /* TODO: use IEEE80211_RX_FRAGMENTED */
2396 static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
2397                                         struct ieee80211_rate *rate)
2398 {
2399         struct ieee80211_sub_if_data *sdata;
2400         struct ieee80211_local *local = rx->local;
2401         struct ieee80211_rtap_hdr {
2402                 struct ieee80211_radiotap_header hdr;
2403                 u8 flags;
2404                 u8 rate_or_pad;
2405                 __le16 chan_freq;
2406                 __le16 chan_flags;
2407         } __packed *rthdr;
2408         struct sk_buff *skb = rx->skb, *skb2;
2409         struct net_device *prev_dev = NULL;
2410         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
2411
2412         /*
2413          * If cooked monitor has been processed already, then
2414          * don't do it again. If not, set the flag.
2415          */
2416         if (rx->flags & IEEE80211_RX_CMNTR)
2417                 goto out_free_skb;
2418         rx->flags |= IEEE80211_RX_CMNTR;
2419
2420         if (skb_headroom(skb) < sizeof(*rthdr) &&
2421             pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC))
2422                 goto out_free_skb;
2423
2424         rthdr = (void *)skb_push(skb, sizeof(*rthdr));
2425         memset(rthdr, 0, sizeof(*rthdr));
2426         rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
2427         rthdr->hdr.it_present =
2428                 cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
2429                             (1 << IEEE80211_RADIOTAP_CHANNEL));
2430
2431         if (rate) {
2432                 rthdr->rate_or_pad = rate->bitrate / 5;
2433                 rthdr->hdr.it_present |=
2434                         cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE);
2435         }
2436         rthdr->chan_freq = cpu_to_le16(status->freq);
2437
2438         if (status->band == IEEE80211_BAND_5GHZ)
2439                 rthdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_OFDM |
2440                                                 IEEE80211_CHAN_5GHZ);
2441         else
2442                 rthdr->chan_flags = cpu_to_le16(IEEE80211_CHAN_DYN |
2443                                                 IEEE80211_CHAN_2GHZ);
2444
2445         skb_set_mac_header(skb, 0);
2446         skb->ip_summed = CHECKSUM_UNNECESSARY;
2447         skb->pkt_type = PACKET_OTHERHOST;
2448         skb->protocol = htons(ETH_P_802_2);
2449
2450         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
2451                 if (!ieee80211_sdata_running(sdata))
2452                         continue;
2453
2454                 if (sdata->vif.type != NL80211_IFTYPE_MONITOR ||
2455                     !(sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES))
2456                         continue;
2457
2458                 if (prev_dev) {
2459                         skb2 = skb_clone(skb, GFP_ATOMIC);
2460                         if (skb2) {
2461                                 skb2->dev = prev_dev;
2462                                 netif_receive_skb(skb2);
2463                         }
2464                 }
2465
2466                 prev_dev = sdata->dev;
2467                 sdata->dev->stats.rx_packets++;
2468                 sdata->dev->stats.rx_bytes += skb->len;
2469         }
2470
2471         if (prev_dev) {
2472                 skb->dev = prev_dev;
2473                 netif_receive_skb(skb);
2474                 return;
2475         }
2476
2477  out_free_skb:
2478         dev_kfree_skb(skb);
2479 }
2480
2481 static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx,
2482                                          ieee80211_rx_result res)
2483 {
2484         switch (res) {
2485         case RX_DROP_MONITOR:
2486                 I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop);
2487                 if (rx->sta)
2488                         rx->sta->rx_dropped++;
2489                 /* fall through */
2490         case RX_CONTINUE: {
2491                 struct ieee80211_rate *rate = NULL;
2492                 struct ieee80211_supported_band *sband;
2493                 struct ieee80211_rx_status *status;
2494
2495                 status = IEEE80211_SKB_RXCB((rx->skb));
2496
2497                 sband = rx->local->hw.wiphy->bands[status->band];
2498                 if (!(status->flag & RX_FLAG_HT))
2499                         rate = &sband->bitrates[status->rate_idx];
2500
2501                 ieee80211_rx_cooked_monitor(rx, rate);
2502                 break;
2503                 }
2504         case RX_DROP_UNUSABLE:
2505                 I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop);
2506                 if (rx->sta)
2507                         rx->sta->rx_dropped++;
2508                 dev_kfree_skb(rx->skb);
2509                 break;
2510         case RX_QUEUED:
2511                 I802_DEBUG_INC(rx->sdata->local->rx_handlers_queued);
2512                 break;
2513         }
2514 }
2515
2516 static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx)
2517 {
2518         ieee80211_rx_result res = RX_DROP_MONITOR;
2519         struct sk_buff *skb;
2520
2521 #define CALL_RXH(rxh)                   \
2522         do {                            \
2523                 res = rxh(rx);          \
2524                 if (res != RX_CONTINUE) \
2525                         goto rxh_next;  \
2526         } while (0);
2527
2528         spin_lock(&rx->local->rx_skb_queue.lock);
2529         if (rx->local->running_rx_handler)
2530                 goto unlock;
2531
2532         rx->local->running_rx_handler = true;
2533
2534         while ((skb = __skb_dequeue(&rx->local->rx_skb_queue))) {
2535                 spin_unlock(&rx->local->rx_skb_queue.lock);
2536
2537                 /*
2538                  * all the other fields are valid across frames
2539                  * that belong to an aMPDU since they are on the
2540                  * same TID from the same station
2541                  */
2542                 rx->skb = skb;
2543                 rx->flags = 0;
2544
2545                 CALL_RXH(ieee80211_rx_h_decrypt)
2546                 CALL_RXH(ieee80211_rx_h_check_more_data)
2547                 CALL_RXH(ieee80211_rx_h_sta_process)
2548                 CALL_RXH(ieee80211_rx_h_defragment)
2549                 CALL_RXH(ieee80211_rx_h_ps_poll)
2550                 CALL_RXH(ieee80211_rx_h_michael_mic_verify)
2551                 /* must be after MMIC verify so header is counted in MPDU mic */
2552                 CALL_RXH(ieee80211_rx_h_remove_qos_control)
2553                 CALL_RXH(ieee80211_rx_h_amsdu)
2554 #ifdef CONFIG_MAC80211_MESH
2555                 if (ieee80211_vif_is_mesh(&rx->sdata->vif))
2556                         CALL_RXH(ieee80211_rx_h_mesh_fwding);
2557 #endif
2558                 CALL_RXH(ieee80211_rx_h_data)
2559                 CALL_RXH(ieee80211_rx_h_ctrl);
2560                 CALL_RXH(ieee80211_rx_h_mgmt_check)
2561                 CALL_RXH(ieee80211_rx_h_action)
2562                 CALL_RXH(ieee80211_rx_h_userspace_mgmt)
2563                 CALL_RXH(ieee80211_rx_h_action_return)
2564                 CALL_RXH(ieee80211_rx_h_mgmt)
2565
2566  rxh_next:
2567                 ieee80211_rx_handlers_result(rx, res);
2568                 spin_lock(&rx->local->rx_skb_queue.lock);
2569 #undef CALL_RXH
2570         }
2571
2572         rx->local->running_rx_handler = false;
2573
2574  unlock:
2575         spin_unlock(&rx->local->rx_skb_queue.lock);
2576 }
2577
2578 static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
2579 {
2580         ieee80211_rx_result res = RX_DROP_MONITOR;
2581
2582 #define CALL_RXH(rxh)                   \
2583         do {                            \
2584                 res = rxh(rx);          \
2585                 if (res != RX_CONTINUE) \
2586                         goto rxh_next;  \
2587         } while (0);
2588
2589         CALL_RXH(ieee80211_rx_h_passive_scan)
2590         CALL_RXH(ieee80211_rx_h_check)
2591
2592         ieee80211_rx_reorder_ampdu(rx);
2593
2594         ieee80211_rx_handlers(rx);
2595         return;
2596
2597  rxh_next:
2598         ieee80211_rx_handlers_result(rx, res);
2599
2600 #undef CALL_RXH
2601 }
2602
2603 /*
2604  * This function makes calls into the RX path, therefore
2605  * it has to be invoked under RCU read lock.
2606  */
2607 void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
2608 {
2609         struct ieee80211_rx_data rx = {
2610                 .sta = sta,
2611                 .sdata = sta->sdata,
2612                 .local = sta->local,
2613                 .queue = tid,
2614         };
2615         struct tid_ampdu_rx *tid_agg_rx;
2616
2617         tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]);
2618         if (!tid_agg_rx)
2619                 return;
2620
2621         spin_lock(&tid_agg_rx->reorder_lock);
2622         ieee80211_sta_reorder_release(&sta->local->hw, tid_agg_rx);
2623         spin_unlock(&tid_agg_rx->reorder_lock);
2624
2625         ieee80211_rx_handlers(&rx);
2626 }
2627
2628 /* main receive path */
2629
2630 static int prepare_for_handlers(struct ieee80211_rx_data *rx,
2631                                 struct ieee80211_hdr *hdr)
2632 {
2633         struct ieee80211_sub_if_data *sdata = rx->sdata;
2634         struct sk_buff *skb = rx->skb;
2635         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
2636         u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);
2637         int multicast = is_multicast_ether_addr(hdr->addr1);
2638
2639         switch (sdata->vif.type) {
2640         case NL80211_IFTYPE_STATION:
2641                 if (!bssid && !sdata->u.mgd.use_4addr)
2642                         return 0;
2643                 if (!multicast &&
2644                     compare_ether_addr(sdata->vif.addr, hdr->addr1) != 0) {
2645                         if (!(sdata->dev->flags & IFF_PROMISC) ||
2646                             sdata->u.mgd.use_4addr)
2647                                 return 0;
2648                         status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
2649                 }
2650                 break;
2651         case NL80211_IFTYPE_ADHOC:
2652                 if (!bssid)
2653                         return 0;
2654                 if (ieee80211_is_beacon(hdr->frame_control)) {
2655                         return 1;
2656                 }
2657                 else if (!ieee80211_bssid_match(bssid, sdata->u.ibss.bssid)) {
2658                         if (!(status->rx_flags & IEEE80211_RX_IN_SCAN))
2659                                 return 0;
2660                         status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
2661                 } else if (!multicast &&
2662                            compare_ether_addr(sdata->vif.addr,
2663                                               hdr->addr1) != 0) {
2664                         if (!(sdata->dev->flags & IFF_PROMISC))
2665                                 return 0;
2666                         status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
2667                 } else if (!rx->sta) {
2668                         int rate_idx;
2669                         if (status->flag & RX_FLAG_HT)
2670                                 rate_idx = 0; /* TODO: HT rates */
2671                         else
2672                                 rate_idx = status->rate_idx;
2673                         rx->sta = ieee80211_ibss_add_sta(sdata, bssid,
2674                                         hdr->addr2, BIT(rate_idx), GFP_ATOMIC);
2675                 }
2676                 break;
2677         case NL80211_IFTYPE_MESH_POINT:
2678                 if (!multicast &&
2679                     compare_ether_addr(sdata->vif.addr,
2680                                        hdr->addr1) != 0) {
2681                         if (!(sdata->dev->flags & IFF_PROMISC))
2682                                 return 0;
2683
2684                         status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
2685                 }
2686                 break;
2687         case NL80211_IFTYPE_AP_VLAN:
2688         case NL80211_IFTYPE_AP:
2689                 if (!bssid) {
2690                         if (compare_ether_addr(sdata->vif.addr,
2691                                                hdr->addr1))
2692                                 return 0;
2693                 } else if (!ieee80211_bssid_match(bssid,
2694                                         sdata->vif.addr)) {
2695                         if (!(status->rx_flags & IEEE80211_RX_IN_SCAN) &&
2696                             !ieee80211_is_beacon(hdr->frame_control))
2697                                 return 0;
2698                         status->rx_flags &= ~IEEE80211_RX_RA_MATCH;
2699                 }
2700                 break;
2701         case NL80211_IFTYPE_WDS:
2702                 if (bssid || !ieee80211_is_data(hdr->frame_control))
2703                         return 0;
2704                 if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
2705                         return 0;
2706                 break;
2707         default:
2708                 /* should never get here */
2709                 WARN_ON(1);
2710                 break;
2711         }
2712
2713         return 1;
2714 }
2715
2716 /*
2717  * This function returns whether or not the SKB
2718  * was destined for RX processing or not, which,
2719  * if consume is true, is equivalent to whether
2720  * or not the skb was consumed.
2721  */
2722 static bool ieee80211_prepare_and_rx_handle(struct ieee80211_rx_data *rx,
2723                                             struct sk_buff *skb, bool consume)
2724 {
2725         struct ieee80211_local *local = rx->local;
2726         struct ieee80211_sub_if_data *sdata = rx->sdata;
2727         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
2728         struct ieee80211_hdr *hdr = (void *)skb->data;
2729         int prepares;
2730
2731         rx->skb = skb;
2732         status->rx_flags |= IEEE80211_RX_RA_MATCH;
2733         prepares = prepare_for_handlers(rx, hdr);
2734
2735         if (!prepares)
2736                 return false;
2737
2738         if (status->flag & RX_FLAG_MMIC_ERROR) {
2739                 if (status->rx_flags & IEEE80211_RX_RA_MATCH)
2740                         ieee80211_rx_michael_mic_report(hdr, rx);
2741                 return false;
2742         }
2743
2744         if (!consume) {
2745                 skb = skb_copy(skb, GFP_ATOMIC);
2746                 if (!skb) {
2747                         if (net_ratelimit())
2748                                 wiphy_debug(local->hw.wiphy,
2749                                         "failed to copy skb for %s\n",
2750                                         sdata->name);
2751                         return true;
2752                 }
2753
2754                 rx->skb = skb;
2755         }
2756
2757         ieee80211_invoke_rx_handlers(rx);
2758         return true;
2759 }
2760
2761 /*
2762  * This is the actual Rx frames handler. as it blongs to Rx path it must
2763  * be called with rcu_read_lock protection.
2764  */
2765 static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
2766                                          struct sk_buff *skb)
2767 {
2768         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
2769         struct ieee80211_local *local = hw_to_local(hw);
2770         struct ieee80211_sub_if_data *sdata;
2771         struct ieee80211_hdr *hdr;
2772         __le16 fc;
2773         struct ieee80211_rx_data rx;
2774         struct ieee80211_sub_if_data *prev;
2775         struct sta_info *sta, *tmp, *prev_sta;
2776         int err = 0;
2777
2778         fc = ((struct ieee80211_hdr *)skb->data)->frame_control;
2779         memset(&rx, 0, sizeof(rx));
2780         rx.skb = skb;
2781         rx.local = local;
2782
2783         if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc))
2784                 local->dot11ReceivedFragmentCount++;
2785
2786         if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
2787                      test_bit(SCAN_SW_SCANNING, &local->scanning)))
2788                 status->rx_flags |= IEEE80211_RX_IN_SCAN;
2789
2790         if (ieee80211_is_mgmt(fc))
2791                 err = skb_linearize(skb);
2792         else
2793                 err = !pskb_may_pull(skb, ieee80211_hdrlen(fc));
2794
2795         if (err) {
2796                 dev_kfree_skb(skb);
2797                 return;
2798         }
2799
2800         hdr = (struct ieee80211_hdr *)skb->data;
2801         ieee80211_parse_qos(&rx);
2802         ieee80211_verify_alignment(&rx);
2803
2804         if (ieee80211_is_data(fc)) {
2805                 prev_sta = NULL;
2806
2807                 for_each_sta_info(local, hdr->addr2, sta, tmp) {
2808                         if (!prev_sta) {
2809                                 prev_sta = sta;
2810                                 continue;
2811                         }
2812
2813                         rx.sta = prev_sta;
2814                         rx.sdata = prev_sta->sdata;
2815                         ieee80211_prepare_and_rx_handle(&rx, skb, false);
2816
2817                         prev_sta = sta;
2818                 }
2819
2820                 if (prev_sta) {
2821                         rx.sta = prev_sta;
2822                         rx.sdata = prev_sta->sdata;
2823
2824                         if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
2825                                 return;
2826                         goto out;
2827                 }
2828         }
2829
2830         prev = NULL;
2831
2832         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
2833                 if (!ieee80211_sdata_running(sdata))
2834                         continue;
2835
2836                 if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
2837                     sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
2838                         continue;
2839
2840                 /*
2841                  * frame is destined for this interface, but if it's
2842                  * not also for the previous one we handle that after
2843                  * the loop to avoid copying the SKB once too much
2844                  */
2845
2846                 if (!prev) {
2847                         prev = sdata;
2848                         continue;
2849                 }
2850
2851                 rx.sta = sta_info_get_bss(prev, hdr->addr2);
2852                 rx.sdata = prev;
2853                 ieee80211_prepare_and_rx_handle(&rx, skb, false);
2854
2855                 prev = sdata;
2856         }
2857
2858         if (prev) {
2859                 rx.sta = sta_info_get_bss(prev, hdr->addr2);
2860                 rx.sdata = prev;
2861
2862                 if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
2863                         return;
2864         }
2865
2866  out:
2867         dev_kfree_skb(skb);
2868 }
2869
2870 /*
2871  * This is the receive path handler. It is called by a low level driver when an
2872  * 802.11 MPDU is received from the hardware.
2873  */
2874 void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
2875 {
2876         struct ieee80211_local *local = hw_to_local(hw);
2877         struct ieee80211_rate *rate = NULL;
2878         struct ieee80211_supported_band *sband;
2879         struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
2880
2881         WARN_ON_ONCE(softirq_count() == 0);
2882
2883         if (WARN_ON(status->band < 0 ||
2884                     status->band >= IEEE80211_NUM_BANDS))
2885                 goto drop;
2886
2887         sband = local->hw.wiphy->bands[status->band];
2888         if (WARN_ON(!sband))
2889                 goto drop;
2890
2891         /*
2892          * If we're suspending, it is possible although not too likely
2893          * that we'd be receiving frames after having already partially
2894          * quiesced the stack. We can't process such frames then since
2895          * that might, for example, cause stations to be added or other
2896          * driver callbacks be invoked.
2897          */
2898         if (unlikely(local->quiescing || local->suspended))
2899                 goto drop;
2900
2901         /*
2902          * The same happens when we're not even started,
2903          * but that's worth a warning.
2904          */
2905         if (WARN_ON(!local->started))
2906                 goto drop;
2907
2908         if (likely(!(status->flag & RX_FLAG_FAILED_PLCP_CRC))) {
2909                 /*
2910                  * Validate the rate, unless a PLCP error means that
2911                  * we probably can't have a valid rate here anyway.
2912                  */
2913
2914                 if (status->flag & RX_FLAG_HT) {
2915                         /*
2916                          * rate_idx is MCS index, which can be [0-76]
2917                          * as documented on:
2918                          *
2919                          * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
2920                          *
2921                          * Anything else would be some sort of driver or
2922                          * hardware error. The driver should catch hardware
2923                          * errors.
2924                          */
2925                         if (WARN((status->rate_idx < 0 ||
2926                                  status->rate_idx > 76),
2927                                  "Rate marked as an HT rate but passed "
2928                                  "status->rate_idx is not "
2929                                  "an MCS index [0-76]: %d (0x%02x)\n",
2930                                  status->rate_idx,
2931                                  status->rate_idx))
2932                                 goto drop;
2933                 } else {
2934                         if (WARN_ON(status->rate_idx < 0 ||
2935                                     status->rate_idx >= sband->n_bitrates))
2936                                 goto drop;
2937                         rate = &sband->bitrates[status->rate_idx];
2938                 }
2939         }
2940
2941         status->rx_flags = 0;
2942
2943         /*
2944          * key references and virtual interfaces are protected using RCU
2945          * and this requires that we are in a read-side RCU section during
2946          * receive processing
2947          */
2948         rcu_read_lock();
2949
2950         /*
2951          * Frames with failed FCS/PLCP checksum are not returned,
2952          * all other frames are returned without radiotap header
2953          * if it was previously present.
2954          * Also, frames with less than 16 bytes are dropped.
2955          */
2956         skb = ieee80211_rx_monitor(local, skb, rate);
2957         if (!skb) {
2958                 rcu_read_unlock();
2959                 return;
2960         }
2961
2962         ieee80211_tpt_led_trig_rx(local,
2963                         ((struct ieee80211_hdr *)skb->data)->frame_control,
2964                         skb->len);
2965         __ieee80211_rx_handle_packet(hw, skb);
2966
2967         rcu_read_unlock();
2968
2969         return;
2970  drop:
2971         kfree_skb(skb);
2972 }
2973 EXPORT_SYMBOL(ieee80211_rx);
2974
2975 /* This is a version of the rx handler that can be called from hard irq
2976  * context. Post the skb on the queue and schedule the tasklet */
2977 void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb)
2978 {
2979         struct ieee80211_local *local = hw_to_local(hw);
2980
2981         BUILD_BUG_ON(sizeof(struct ieee80211_rx_status) > sizeof(skb->cb));
2982
2983         skb->pkt_type = IEEE80211_RX_MSG;
2984         skb_queue_tail(&local->skb_queue, skb);
2985         tasklet_schedule(&local->tasklet);
2986 }
2987 EXPORT_SYMBOL(ieee80211_rx_irqsafe);