irda: Use SKB queue and list helpers instead of doing it by-hand.
[linux-2.6.git] / net / irda / irlap_event.c
1 /*********************************************************************
2  *
3  * Filename:      irlap_event.c
4  * Version:       0.9
5  * Description:   IrLAP state machine implementation
6  * Status:        Experimental.
7  * Author:        Dag Brattli <dag@brattli.net>
8  * Created at:    Sat Aug 16 00:59:29 1997
9  * Modified at:   Sat Dec 25 21:07:57 1999
10  * Modified by:   Dag Brattli <dag@brattli.net>
11  *
12  *     Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>,
13  *     Copyright (c) 1998      Thomas Davis <ratbert@radiks.net>
14  *     All Rights Reserved.
15  *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
16  *
17  *     This program is free software; you can redistribute it and/or
18  *     modify it under the terms of the GNU General Public License as
19  *     published by the Free Software Foundation; either version 2 of
20  *     the License, or (at your option) any later version.
21  *
22  *     Neither Dag Brattli nor University of Tromsø admit liability nor
23  *     provide warranty for any of this software. This material is
24  *     provided "AS-IS" and at no charge.
25  *
26  ********************************************************************/
27
28 #include <linux/string.h>
29 #include <linux/kernel.h>
30 #include <linux/delay.h>
31 #include <linux/skbuff.h>
32
33 #include <net/irda/irda.h>
34 #include <net/irda/irlap_event.h>
35
36 #include <net/irda/timer.h>
37 #include <net/irda/irlap.h>
38 #include <net/irda/irlap_frame.h>
39 #include <net/irda/qos.h>
40 #include <net/irda/parameters.h>
41 #include <net/irda/irlmp.h>             /* irlmp_flow_indication(), ... */
42
43 #include <net/irda/irda_device.h>
44
45 #ifdef CONFIG_IRDA_FAST_RR
46 int sysctl_fast_poll_increase = 50;
47 #endif
48
49 static int irlap_state_ndm    (struct irlap_cb *self, IRLAP_EVENT event,
50                                struct sk_buff *skb, struct irlap_info *info);
51 static int irlap_state_query  (struct irlap_cb *self, IRLAP_EVENT event,
52                                struct sk_buff *skb, struct irlap_info *info);
53 static int irlap_state_reply  (struct irlap_cb *self, IRLAP_EVENT event,
54                                struct sk_buff *skb, struct irlap_info *info);
55 static int irlap_state_conn   (struct irlap_cb *self, IRLAP_EVENT event,
56                                struct sk_buff *skb, struct irlap_info *info);
57 static int irlap_state_setup  (struct irlap_cb *self, IRLAP_EVENT event,
58                                struct sk_buff *skb, struct irlap_info *info);
59 static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
60                                struct sk_buff *skb, struct irlap_info *info);
61 static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event,
62                                struct sk_buff *skb, struct irlap_info *info);
63 static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event,
64                                struct sk_buff *skb, struct irlap_info *info);
65 static int irlap_state_nrm_p  (struct irlap_cb *self, IRLAP_EVENT event,
66                                struct sk_buff *skb, struct irlap_info *info);
67 static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
68                                   struct sk_buff *skb, struct irlap_info *info);
69 static int irlap_state_reset  (struct irlap_cb *self, IRLAP_EVENT event,
70                                struct sk_buff *skb, struct irlap_info *info);
71 static int irlap_state_nrm_s  (struct irlap_cb *self, IRLAP_EVENT event,
72                                struct sk_buff *skb, struct irlap_info *info);
73 static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event,
74                                struct sk_buff *skb, struct irlap_info *info);
75 static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event,
76                                struct sk_buff *skb, struct irlap_info *info);
77 static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event,
78                                    struct sk_buff *, struct irlap_info *);
79
80 #ifdef CONFIG_IRDA_DEBUG
81 static const char *irlap_event[] = {
82         "DISCOVERY_REQUEST",
83         "CONNECT_REQUEST",
84         "CONNECT_RESPONSE",
85         "DISCONNECT_REQUEST",
86         "DATA_REQUEST",
87         "RESET_REQUEST",
88         "RESET_RESPONSE",
89         "SEND_I_CMD",
90         "SEND_UI_FRAME",
91         "RECV_DISCOVERY_XID_CMD",
92         "RECV_DISCOVERY_XID_RSP",
93         "RECV_SNRM_CMD",
94         "RECV_TEST_CMD",
95         "RECV_TEST_RSP",
96         "RECV_UA_RSP",
97         "RECV_DM_RSP",
98         "RECV_RD_RSP",
99         "RECV_I_CMD",
100         "RECV_I_RSP",
101         "RECV_UI_FRAME",
102         "RECV_FRMR_RSP",
103         "RECV_RR_CMD",
104         "RECV_RR_RSP",
105         "RECV_RNR_CMD",
106         "RECV_RNR_RSP",
107         "RECV_REJ_CMD",
108         "RECV_REJ_RSP",
109         "RECV_SREJ_CMD",
110         "RECV_SREJ_RSP",
111         "RECV_DISC_CMD",
112         "SLOT_TIMER_EXPIRED",
113         "QUERY_TIMER_EXPIRED",
114         "FINAL_TIMER_EXPIRED",
115         "POLL_TIMER_EXPIRED",
116         "DISCOVERY_TIMER_EXPIRED",
117         "WD_TIMER_EXPIRED",
118         "BACKOFF_TIMER_EXPIRED",
119         "MEDIA_BUSY_TIMER_EXPIRED",
120 };
121 #endif  /* CONFIG_IRDA_DEBUG */
122
123 const char *irlap_state[] = {
124         "LAP_NDM",
125         "LAP_QUERY",
126         "LAP_REPLY",
127         "LAP_CONN",
128         "LAP_SETUP",
129         "LAP_OFFLINE",
130         "LAP_XMIT_P",
131         "LAP_PCLOSE",
132         "LAP_NRM_P",
133         "LAP_RESET_WAIT",
134         "LAP_RESET",
135         "LAP_NRM_S",
136         "LAP_XMIT_S",
137         "LAP_SCLOSE",
138         "LAP_RESET_CHECK",
139 };
140
141 static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event,
142                       struct sk_buff *skb, struct irlap_info *info) =
143 {
144         irlap_state_ndm,
145         irlap_state_query,
146         irlap_state_reply,
147         irlap_state_conn,
148         irlap_state_setup,
149         irlap_state_offline,
150         irlap_state_xmit_p,
151         irlap_state_pclose,
152         irlap_state_nrm_p,
153         irlap_state_reset_wait,
154         irlap_state_reset,
155         irlap_state_nrm_s,
156         irlap_state_xmit_s,
157         irlap_state_sclose,
158         irlap_state_reset_check,
159 };
160
161 /*
162  * Function irda_poll_timer_expired (data)
163  *
164  *    Poll timer has expired. Normally we must now send a RR frame to the
165  *    remote device
166  */
167 static void irlap_poll_timer_expired(void *data)
168 {
169         struct irlap_cb *self = (struct irlap_cb *) data;
170
171         IRDA_ASSERT(self != NULL, return;);
172         IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
173
174         irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
175 }
176
177 /*
178  * Calculate and set time before we will have to send back the pf bit
179  * to the peer. Use in primary.
180  * Make sure that state is XMIT_P/XMIT_S when calling this function
181  * (and that nobody messed up with the state). - Jean II
182  */
183 static void irlap_start_poll_timer(struct irlap_cb *self, int timeout)
184 {
185         IRDA_ASSERT(self != NULL, return;);
186         IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
187
188 #ifdef CONFIG_IRDA_FAST_RR
189         /*
190          * Send out the RR frames faster if our own transmit queue is empty, or
191          * if the peer is busy. The effect is a much faster conversation
192          */
193         if (skb_queue_empty(&self->txq) || self->remote_busy) {
194                 if (self->fast_RR == TRUE) {
195                         /*
196                          *  Assert that the fast poll timer has not reached the
197                          *  normal poll timer yet
198                          */
199                         if (self->fast_RR_timeout < timeout) {
200                                 /*
201                                  *  FIXME: this should be a more configurable
202                                  *         function
203                                  */
204                                 self->fast_RR_timeout +=
205                                         (sysctl_fast_poll_increase * HZ/1000);
206
207                                 /* Use this fast(er) timeout instead */
208                                 timeout = self->fast_RR_timeout;
209                         }
210                 } else {
211                         self->fast_RR = TRUE;
212
213                         /* Start with just 0 ms */
214                         self->fast_RR_timeout = 0;
215                         timeout = 0;
216                 }
217         } else
218                 self->fast_RR = FALSE;
219
220         IRDA_DEBUG(3, "%s(), timeout=%d (%ld)\n", __func__, timeout, jiffies);
221 #endif /* CONFIG_IRDA_FAST_RR */
222
223         if (timeout == 0)
224                 irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
225         else
226                 irda_start_timer(&self->poll_timer, timeout, self,
227                                  irlap_poll_timer_expired);
228 }
229
230 /*
231  * Function irlap_do_event (event, skb, info)
232  *
233  *    Rushes through the state machine without any delay. If state == XMIT
234  *    then send queued data frames.
235  */
236 void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event,
237                     struct sk_buff *skb, struct irlap_info *info)
238 {
239         int ret;
240
241         if (!self || self->magic != LAP_MAGIC)
242                 return;
243
244         IRDA_DEBUG(3, "%s(), event = %s, state = %s\n", __func__,
245                    irlap_event[event], irlap_state[self->state]);
246
247         ret = (*state[self->state])(self, event, skb, info);
248
249         /*
250          *  Check if there are any pending events that needs to be executed
251          */
252         switch (self->state) {
253         case LAP_XMIT_P: /* FALLTHROUGH */
254         case LAP_XMIT_S:
255                 /*
256                  * We just received the pf bit and are at the beginning
257                  * of a new LAP transmit window.
258                  * Check if there are any queued data frames, and do not
259                  * try to disconnect link if we send any data frames, since
260                  * that will change the state away form XMIT
261                  */
262                 IRDA_DEBUG(2, "%s() : queue len = %d\n", __func__,
263                            skb_queue_len(&self->txq));
264
265                 if (!skb_queue_empty(&self->txq)) {
266                         /* Prevent race conditions with irlap_data_request() */
267                         self->local_busy = TRUE;
268
269                         /* Theory of operation.
270                          * We send frames up to when we fill the window or
271                          * reach line capacity. Those frames will queue up
272                          * in the device queue, and the driver will slowly
273                          * send them.
274                          * After each frame that we send, we poll the higher
275                          * layer for more data. It's the right time to do
276                          * that because the link layer need to perform the mtt
277                          * and then send the first frame, so we can afford
278                          * to send a bit of time in kernel space.
279                          * The explicit flow indication allow to minimise
280                          * buffers (== lower latency), to avoid higher layer
281                          * polling via timers (== less context switches) and
282                          * to implement a crude scheduler - Jean II */
283
284                         /* Try to send away all queued data frames */
285                         while ((skb = skb_dequeue(&self->txq)) != NULL) {
286                                 /* Send one frame */
287                                 ret = (*state[self->state])(self, SEND_I_CMD,
288                                                             skb, NULL);
289                                 /* Drop reference count.
290                                  * It will be increase as needed in
291                                  * irlap_send_data_xxx() */
292                                 kfree_skb(skb);
293
294                                 /* Poll the higher layers for one more frame */
295                                 irlmp_flow_indication(self->notify.instance,
296                                                       FLOW_START);
297
298                                 if (ret == -EPROTO)
299                                         break; /* Try again later! */
300                         }
301                         /* Finished transmitting */
302                         self->local_busy = FALSE;
303                 } else if (self->disconnect_pending) {
304                         self->disconnect_pending = FALSE;
305
306                         ret = (*state[self->state])(self, DISCONNECT_REQUEST,
307                                                     NULL, NULL);
308                 }
309                 break;
310 /*      case LAP_NDM: */
311 /*      case LAP_CONN: */
312 /*      case LAP_RESET_WAIT: */
313 /*      case LAP_RESET_CHECK: */
314         default:
315                 break;
316         }
317 }
318
319 /*
320  * Function irlap_state_ndm (event, skb, frame)
321  *
322  *    NDM (Normal Disconnected Mode) state
323  *
324  */
325 static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event,
326                            struct sk_buff *skb, struct irlap_info *info)
327 {
328         discovery_t *discovery_rsp;
329         int ret = 0;
330
331         IRDA_ASSERT(self != NULL, return -1;);
332         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
333
334         switch (event) {
335         case CONNECT_REQUEST:
336                 IRDA_ASSERT(self->netdev != NULL, return -1;);
337
338                 if (self->media_busy) {
339                         /* Note : this will never happen, because we test
340                          * media busy in irlap_connect_request() and
341                          * postpone the event... - Jean II */
342                         IRDA_DEBUG(0, "%s(), CONNECT_REQUEST: media busy!\n",
343                                    __func__);
344
345                         /* Always switch state before calling upper layers */
346                         irlap_next_state(self, LAP_NDM);
347
348                         irlap_disconnect_indication(self, LAP_MEDIA_BUSY);
349                 } else {
350                         irlap_send_snrm_frame(self, &self->qos_rx);
351
352                         /* Start Final-bit timer */
353                         irlap_start_final_timer(self, self->final_timeout);
354
355                         self->retry_count = 0;
356                         irlap_next_state(self, LAP_SETUP);
357                 }
358                 break;
359         case RECV_SNRM_CMD:
360                 /* Check if the frame contains and I field */
361                 if (info) {
362                         self->daddr = info->daddr;
363                         self->caddr = info->caddr;
364
365                         irlap_next_state(self, LAP_CONN);
366
367                         irlap_connect_indication(self, skb);
368                 } else {
369                         IRDA_DEBUG(0, "%s(), SNRM frame does not "
370                                    "contain an I field!\n", __func__);
371                 }
372                 break;
373         case DISCOVERY_REQUEST:
374                 IRDA_ASSERT(info != NULL, return -1;);
375
376                 if (self->media_busy) {
377                         IRDA_DEBUG(1, "%s(), DISCOVERY_REQUEST: media busy!\n",
378                                    __func__);
379                         /* irlap->log.condition = MEDIA_BUSY; */
380
381                         /* This will make IrLMP try again */
382                         irlap_discovery_confirm(self, NULL);
383                         /* Note : the discovery log is not cleaned up here,
384                          * it will be done in irlap_discovery_request()
385                          * Jean II */
386                         return 0;
387                 }
388
389                 self->S = info->S;
390                 self->s = info->s;
391                 irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE,
392                                                info->discovery);
393                 self->frame_sent = FALSE;
394                 self->s++;
395
396                 irlap_start_slot_timer(self, self->slot_timeout);
397                 irlap_next_state(self, LAP_QUERY);
398                 break;
399         case RECV_DISCOVERY_XID_CMD:
400                 IRDA_ASSERT(info != NULL, return -1;);
401
402                 /* Assert that this is not the final slot */
403                 if (info->s <= info->S) {
404                         self->slot = irlap_generate_rand_time_slot(info->S,
405                                                                    info->s);
406                         if (self->slot == info->s) {
407                                 discovery_rsp = irlmp_get_discovery_response();
408                                 discovery_rsp->data.daddr = info->daddr;
409
410                                 irlap_send_discovery_xid_frame(self, info->S,
411                                                                self->slot,
412                                                                FALSE,
413                                                                discovery_rsp);
414                                 self->frame_sent = TRUE;
415                         } else
416                                 self->frame_sent = FALSE;
417
418                         /*
419                          * Go to reply state until end of discovery to
420                          * inhibit our own transmissions. Set the timer
421                          * to not stay forever there... Jean II
422                          */
423                         irlap_start_query_timer(self, info->S, info->s);
424                         irlap_next_state(self, LAP_REPLY);
425                 } else {
426                 /* This is the final slot. How is it possible ?
427                  * This would happen is both discoveries are just slightly
428                  * offset (if they are in sync, all packets are lost).
429                  * Most often, all the discovery requests will be received
430                  * in QUERY state (see my comment there), except for the
431                  * last frame that will come here.
432                  * The big trouble when it happen is that active discovery
433                  * doesn't happen, because nobody answer the discoveries
434                  * frame of the other guy, so the log shows up empty.
435                  * What should we do ?
436                  * Not much. It's too late to answer those discovery frames,
437                  * so we just pass the info to IrLMP who will put it in the
438                  * log (and post an event).
439                  * Another cause would be devices that do discovery much
440                  * slower than us, however the latest fixes should minimise
441                  * those cases...
442                  * Jean II
443                  */
444                         IRDA_DEBUG(1, "%s(), Receiving final discovery request, missed the discovery slots :-(\n", __func__);
445
446                         /* Last discovery request -> in the log */
447                         irlap_discovery_indication(self, info->discovery);
448                 }
449                 break;
450         case MEDIA_BUSY_TIMER_EXPIRED:
451                 /* A bunch of events may be postponed because the media is
452                  * busy (usually immediately after we close a connection),
453                  * or while we are doing discovery (state query/reply).
454                  * In all those cases, the media busy flag will be cleared
455                  * when it's OK for us to process those postponed events.
456                  * This event is not mentioned in the state machines in the
457                  * IrLAP spec. It's because they didn't consider Ultra and
458                  * postponing connection request is optional.
459                  * Jean II */
460 #ifdef CONFIG_IRDA_ULTRA
461                 /* Send any pending Ultra frames if any */
462                 if (!skb_queue_empty(&self->txq_ultra)) {
463                         /* We don't send the frame, just post an event.
464                          * Also, previously this code was in timer.c...
465                          * Jean II */
466                         ret = (*state[self->state])(self, SEND_UI_FRAME,
467                                                     NULL, NULL);
468                 }
469 #endif /* CONFIG_IRDA_ULTRA */
470                 /* Check if we should try to connect.
471                  * This code was previously in irlap_do_event() */
472                 if (self->connect_pending) {
473                         self->connect_pending = FALSE;
474
475                         /* This one *should* not pend in this state, except
476                          * if a socket try to connect and immediately
477                          * disconnect. - clear - Jean II */
478                         if (self->disconnect_pending)
479                                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
480                         else
481                                 ret = (*state[self->state])(self,
482                                                             CONNECT_REQUEST,
483                                                             NULL, NULL);
484                         self->disconnect_pending = FALSE;
485                 }
486                 /* Note : one way to test if this code works well (including
487                  * media busy and small busy) is to create a user space
488                  * application generating an Ultra packet every 3.05 sec (or
489                  * 2.95 sec) and to see how it interact with discovery.
490                  * It's fairly easy to check that no packet is lost, that the
491                  * packets are postponed during discovery and that after
492                  * discovery indication you have a 100ms "gap".
493                  * As connection request and Ultra are now processed the same
494                  * way, this avoid the tedious job of trying IrLAP connection
495                  * in all those cases...
496                  * Jean II */
497                 break;
498 #ifdef CONFIG_IRDA_ULTRA
499         case SEND_UI_FRAME:
500         {
501                 int i;
502                 /* Only allowed to repeat an operation twice */
503                 for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) {
504                         skb = skb_dequeue(&self->txq_ultra);
505                         if (skb)
506                                 irlap_send_ui_frame(self, skb, CBROADCAST,
507                                                     CMD_FRAME);
508                         else
509                                 break;
510                         /* irlap_send_ui_frame() won't increase skb reference
511                          * count, so no dev_kfree_skb() - Jean II */
512                 }
513                 if (i == 2) {
514                         /* Force us to listen 500 ms again */
515                         irda_device_set_media_busy(self->netdev, TRUE);
516                 }
517                 break;
518         }
519         case RECV_UI_FRAME:
520                 /* Only accept broadcast frames in NDM mode */
521                 if (info->caddr != CBROADCAST) {
522                         IRDA_DEBUG(0, "%s(), not a broadcast frame!\n",
523                                    __func__);
524                 } else
525                         irlap_unitdata_indication(self, skb);
526                 break;
527 #endif /* CONFIG_IRDA_ULTRA */
528         case RECV_TEST_CMD:
529                 /* Remove test frame header */
530                 skb_pull(skb, sizeof(struct test_frame));
531
532                 /*
533                  * Send response. This skb will not be sent out again, and
534                  * will only be used to send out the same info as the cmd
535                  */
536                 irlap_send_test_frame(self, CBROADCAST, info->daddr, skb);
537                 break;
538         case RECV_TEST_RSP:
539                 IRDA_DEBUG(0, "%s() not implemented!\n", __func__);
540                 break;
541         default:
542                 IRDA_DEBUG(2, "%s(), Unknown event %s\n", __func__,
543                            irlap_event[event]);
544
545                 ret = -1;
546                 break;
547         }
548         return ret;
549 }
550
551 /*
552  * Function irlap_state_query (event, skb, info)
553  *
554  *    QUERY state
555  *
556  */
557 static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event,
558                              struct sk_buff *skb, struct irlap_info *info)
559 {
560         int ret = 0;
561
562         IRDA_ASSERT(self != NULL, return -1;);
563         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
564
565         switch (event) {
566         case RECV_DISCOVERY_XID_RSP:
567                 IRDA_ASSERT(info != NULL, return -1;);
568                 IRDA_ASSERT(info->discovery != NULL, return -1;);
569
570                 IRDA_DEBUG(4, "%s(), daddr=%08x\n", __func__,
571                            info->discovery->data.daddr);
572
573                 if (!self->discovery_log) {
574                         IRDA_WARNING("%s: discovery log is gone! "
575                                      "maybe the discovery timeout has been set"
576                                      " too short?\n", __func__);
577                         break;
578                 }
579                 hashbin_insert(self->discovery_log,
580                                (irda_queue_t *) info->discovery,
581                                info->discovery->data.daddr, NULL);
582
583                 /* Keep state */
584                 /* irlap_next_state(self, LAP_QUERY);  */
585
586                 break;
587         case RECV_DISCOVERY_XID_CMD:
588                 /* Yes, it is possible to receive those frames in this mode.
589                  * Note that most often the last discovery request won't
590                  * occur here but in NDM state (see my comment there).
591                  * What should we do ?
592                  * Not much. We are currently performing our own discovery,
593                  * therefore we can't answer those frames. We don't want
594                  * to change state either. We just pass the info to
595                  * IrLMP who will put it in the log (and post an event).
596                  * Jean II
597                  */
598
599                 IRDA_ASSERT(info != NULL, return -1;);
600
601                 IRDA_DEBUG(1, "%s(), Receiving discovery request (s = %d) while performing discovery :-(\n", __func__, info->s);
602
603                 /* Last discovery request ? */
604                 if (info->s == 0xff)
605                         irlap_discovery_indication(self, info->discovery);
606                 break;
607         case SLOT_TIMER_EXPIRED:
608                 /*
609                  * Wait a little longer if we detect an incoming frame. This
610                  * is not mentioned in the spec, but is a good thing to do,
611                  * since we want to work even with devices that violate the
612                  * timing requirements.
613                  */
614                 if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
615                         IRDA_DEBUG(2, "%s(), device is slow to answer, "
616                                    "waiting some more!\n", __func__);
617                         irlap_start_slot_timer(self, msecs_to_jiffies(10));
618                         self->add_wait = TRUE;
619                         return ret;
620                 }
621                 self->add_wait = FALSE;
622
623                 if (self->s < self->S) {
624                         irlap_send_discovery_xid_frame(self, self->S,
625                                                        self->s, TRUE,
626                                                        self->discovery_cmd);
627                         self->s++;
628                         irlap_start_slot_timer(self, self->slot_timeout);
629
630                         /* Keep state */
631                         irlap_next_state(self, LAP_QUERY);
632                 } else {
633                         /* This is the final slot! */
634                         irlap_send_discovery_xid_frame(self, self->S, 0xff,
635                                                        TRUE,
636                                                        self->discovery_cmd);
637
638                         /* Always switch state before calling upper layers */
639                         irlap_next_state(self, LAP_NDM);
640
641                         /*
642                          *  We are now finished with the discovery procedure,
643                          *  so now we must return the results
644                          */
645                         irlap_discovery_confirm(self, self->discovery_log);
646
647                         /* IrLMP should now have taken care of the log */
648                         self->discovery_log = NULL;
649                 }
650                 break;
651         default:
652                 IRDA_DEBUG(2, "%s(), Unknown event %s\n", __func__,
653                            irlap_event[event]);
654
655                 ret = -1;
656                 break;
657         }
658         return ret;
659 }
660
661 /*
662  * Function irlap_state_reply (self, event, skb, info)
663  *
664  *    REPLY, we have received a XID discovery frame from a device and we
665  *    are waiting for the right time slot to send a response XID frame
666  *
667  */
668 static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,
669                              struct sk_buff *skb, struct irlap_info *info)
670 {
671         discovery_t *discovery_rsp;
672         int ret=0;
673
674         IRDA_DEBUG(4, "%s()\n", __func__);
675
676         IRDA_ASSERT(self != NULL, return -1;);
677         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
678
679         switch (event) {
680         case QUERY_TIMER_EXPIRED:
681                 IRDA_DEBUG(0, "%s(), QUERY_TIMER_EXPIRED <%ld>\n",
682                            __func__, jiffies);
683                 irlap_next_state(self, LAP_NDM);
684                 break;
685         case RECV_DISCOVERY_XID_CMD:
686                 IRDA_ASSERT(info != NULL, return -1;);
687                 /* Last frame? */
688                 if (info->s == 0xff) {
689                         del_timer(&self->query_timer);
690
691                         /* info->log.condition = REMOTE; */
692
693                         /* Always switch state before calling upper layers */
694                         irlap_next_state(self, LAP_NDM);
695
696                         irlap_discovery_indication(self, info->discovery);
697                 } else {
698                         /* If it's our slot, send our reply */
699                         if ((info->s >= self->slot) && (!self->frame_sent)) {
700                                 discovery_rsp = irlmp_get_discovery_response();
701                                 discovery_rsp->data.daddr = info->daddr;
702
703                                 irlap_send_discovery_xid_frame(self, info->S,
704                                                                self->slot,
705                                                                FALSE,
706                                                                discovery_rsp);
707
708                                 self->frame_sent = TRUE;
709                         }
710                         /* Readjust our timer to accomodate devices
711                          * doing faster or slower discovery than us...
712                          * Jean II */
713                         irlap_start_query_timer(self, info->S, info->s);
714
715                         /* Keep state */
716                         //irlap_next_state(self, LAP_REPLY);
717                 }
718                 break;
719         default:
720                 IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __func__,
721                            event, irlap_event[event]);
722
723                 ret = -1;
724                 break;
725         }
726         return ret;
727 }
728
729 /*
730  * Function irlap_state_conn (event, skb, info)
731  *
732  *    CONN, we have received a SNRM command and is waiting for the upper
733  *    layer to accept or refuse connection
734  *
735  */
736 static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event,
737                             struct sk_buff *skb, struct irlap_info *info)
738 {
739         int ret = 0;
740
741         IRDA_DEBUG(4, "%s(), event=%s\n", __func__, irlap_event[ event]);
742
743         IRDA_ASSERT(self != NULL, return -1;);
744         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
745
746         switch (event) {
747         case CONNECT_RESPONSE:
748                 skb_pull(skb, sizeof(struct snrm_frame));
749
750                 IRDA_ASSERT(self->netdev != NULL, return -1;);
751
752                 irlap_qos_negotiate(self, skb);
753
754                 irlap_initiate_connection_state(self);
755
756                 /*
757                  * Applying the parameters now will make sure we change speed
758                  * *after* we have sent the next frame
759                  */
760                 irlap_apply_connection_parameters(self, FALSE);
761
762                 /*
763                  * Sending this frame will force a speed change after it has
764                  * been sent (i.e. the frame will be sent at 9600).
765                  */
766                 irlap_send_ua_response_frame(self, &self->qos_rx);
767
768 #if 0
769                 /*
770                  * We are allowed to send two frames, but this may increase
771                  * the connect latency, so lets not do it for now.
772                  */
773                 /* This is full of good intentions, but doesn't work in
774                  * practice.
775                  * After sending the first UA response, we switch the
776                  * dongle to the negotiated speed, which is usually
777                  * different than 9600 kb/s.
778                  * From there, there is two solutions :
779                  * 1) The other end has received the first UA response :
780                  * it will set up the connection, move to state LAP_NRM_P,
781                  * and will ignore and drop the second UA response.
782                  * Actually, it's even worse : the other side will almost
783                  * immediately send a RR that will likely collide with the
784                  * UA response (depending on negotiated turnaround).
785                  * 2) The other end has not received the first UA response,
786                  * will stay at 9600 and will never see the second UA response.
787                  * Jean II */
788                 irlap_send_ua_response_frame(self, &self->qos_rx);
789 #endif
790
791                 /*
792                  *  The WD-timer could be set to the duration of the P-timer
793                  *  for this case, but it is recommended to use twice the
794                  *  value (note 3 IrLAP p. 60).
795                  */
796                 irlap_start_wd_timer(self, self->wd_timeout);
797                 irlap_next_state(self, LAP_NRM_S);
798
799                 break;
800         case RECV_DISCOVERY_XID_CMD:
801                 IRDA_DEBUG(3, "%s(), event RECV_DISCOVER_XID_CMD!\n",
802                            __func__);
803                 irlap_next_state(self, LAP_NDM);
804
805                 break;
806         case DISCONNECT_REQUEST:
807                 IRDA_DEBUG(0, "%s(), Disconnect request!\n", __func__);
808                 irlap_send_dm_frame(self);
809                 irlap_next_state( self, LAP_NDM);
810                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
811                 break;
812         default:
813                 IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __func__,
814                            event, irlap_event[event]);
815
816                 ret = -1;
817                 break;
818         }
819
820         return ret;
821 }
822
823 /*
824  * Function irlap_state_setup (event, skb, frame)
825  *
826  *    SETUP state, The local layer has transmitted a SNRM command frame to
827  *    a remote peer layer and is awaiting a reply .
828  *
829  */
830 static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event,
831                              struct sk_buff *skb, struct irlap_info *info)
832 {
833         int ret = 0;
834
835         IRDA_DEBUG(4, "%s()\n", __func__);
836
837         IRDA_ASSERT(self != NULL, return -1;);
838         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
839
840         switch (event) {
841         case FINAL_TIMER_EXPIRED:
842                 if (self->retry_count < self->N3) {
843 /*
844  *  Perform random backoff, Wait a random number of time units, minimum
845  *  duration half the time taken to transmitt a SNRM frame, maximum duration
846  *  1.5 times the time taken to transmit a SNRM frame. So this time should
847  *  between 15 msecs and 45 msecs.
848  */
849                         irlap_start_backoff_timer(self, msecs_to_jiffies(20 +
850                                                         (jiffies % 30)));
851                 } else {
852                         /* Always switch state before calling upper layers */
853                         irlap_next_state(self, LAP_NDM);
854
855                         irlap_disconnect_indication(self, LAP_FOUND_NONE);
856                 }
857                 break;
858         case BACKOFF_TIMER_EXPIRED:
859                 irlap_send_snrm_frame(self, &self->qos_rx);
860                 irlap_start_final_timer(self, self->final_timeout);
861                 self->retry_count++;
862                 break;
863         case RECV_SNRM_CMD:
864                 IRDA_DEBUG(4, "%s(), SNRM battle!\n", __func__);
865
866                 IRDA_ASSERT(skb != NULL, return 0;);
867                 IRDA_ASSERT(info != NULL, return 0;);
868
869                 /*
870                  *  The device with the largest device address wins the battle
871                  *  (both have sent a SNRM command!)
872                  */
873                 if (info &&(info->daddr > self->saddr)) {
874                         del_timer(&self->final_timer);
875                         irlap_initiate_connection_state(self);
876
877                         IRDA_ASSERT(self->netdev != NULL, return -1;);
878
879                         skb_pull(skb, sizeof(struct snrm_frame));
880
881                         irlap_qos_negotiate(self, skb);
882
883                         /* Send UA frame and then change link settings */
884                         irlap_apply_connection_parameters(self, FALSE);
885                         irlap_send_ua_response_frame(self, &self->qos_rx);
886
887                         irlap_next_state(self, LAP_NRM_S);
888                         irlap_connect_confirm(self, skb);
889
890                         /*
891                          *  The WD-timer could be set to the duration of the
892                          *  P-timer for this case, but it is recommended
893                          *  to use twice the value (note 3 IrLAP p. 60).
894                          */
895                         irlap_start_wd_timer(self, self->wd_timeout);
896                 } else {
897                         /* We just ignore the other device! */
898                         irlap_next_state(self, LAP_SETUP);
899                 }
900                 break;
901         case RECV_UA_RSP:
902                 /* Stop F-timer */
903                 del_timer(&self->final_timer);
904
905                 /* Initiate connection state */
906                 irlap_initiate_connection_state(self);
907
908                 /* Negotiate connection parameters */
909                 IRDA_ASSERT(skb->len > 10, return -1;);
910
911                 skb_pull(skb, sizeof(struct ua_frame));
912
913                 IRDA_ASSERT(self->netdev != NULL, return -1;);
914
915                 irlap_qos_negotiate(self, skb);
916
917                 /* Set the new link setting *now* (before the rr frame) */
918                 irlap_apply_connection_parameters(self, TRUE);
919                 self->retry_count = 0;
920
921                 /* Wait for turnaround time to give a chance to the other
922                  * device to be ready to receive us.
923                  * Note : the time to switch speed is typically larger
924                  * than the turnaround time, but as we don't have the other
925                  * side speed switch time, that's our best guess...
926                  * Jean II */
927                 irlap_wait_min_turn_around(self, &self->qos_tx);
928
929                 /* This frame will actually be sent at the new speed */
930                 irlap_send_rr_frame(self, CMD_FRAME);
931
932                 /* The timer is set to half the normal timer to quickly
933                  * detect a failure to negociate the new connection
934                  * parameters. IrLAP 6.11.3.2, note 3.
935                  * Note that currently we don't process this failure
936                  * properly, as we should do a quick disconnect.
937                  * Jean II */
938                 irlap_start_final_timer(self, self->final_timeout/2);
939                 irlap_next_state(self, LAP_NRM_P);
940
941                 irlap_connect_confirm(self, skb);
942                 break;
943         case RECV_DM_RSP:     /* FALLTHROUGH */
944         case RECV_DISC_CMD:
945                 del_timer(&self->final_timer);
946                 irlap_next_state(self, LAP_NDM);
947
948                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
949                 break;
950         default:
951                 IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __func__,
952                            event, irlap_event[event]);
953
954                 ret = -1;
955                 break;
956         }
957         return ret;
958 }
959
960 /*
961  * Function irlap_state_offline (self, event, skb, info)
962  *
963  *    OFFLINE state, not used for now!
964  *
965  */
966 static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
967                                struct sk_buff *skb, struct irlap_info *info)
968 {
969         IRDA_DEBUG( 0, "%s(), Unknown event\n", __func__);
970
971         return -1;
972 }
973
974 /*
975  * Function irlap_state_xmit_p (self, event, skb, info)
976  *
977  *    XMIT, Only the primary station has right to transmit, and we
978  *    therefore do not expect to receive any transmissions from other
979  *    stations.
980  *
981  */
982 static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event,
983                               struct sk_buff *skb, struct irlap_info *info)
984 {
985         int ret = 0;
986
987         switch (event) {
988         case SEND_I_CMD:
989                 /*
990                  *  Only send frame if send-window > 0.
991                  */
992                 if ((self->window > 0) && (!self->remote_busy)) {
993                         int nextfit;
994 #ifdef CONFIG_IRDA_DYNAMIC_WINDOW
995                         struct sk_buff *skb_next;
996
997                         /* With DYNAMIC_WINDOW, we keep the window size
998                          * maximum, and adapt on the packets we are sending.
999                          * At 115k, we can send only 2 packets of 2048 bytes
1000                          * in a 500 ms turnaround. Without this option, we
1001                          * would always limit the window to 2. With this
1002                          * option, if we send smaller packets, we can send
1003                          * up to 7 of them (always depending on QoS).
1004                          * Jean II */
1005
1006                         /* Look at the next skb. This is safe, as we are
1007                          * the only consumer of the Tx queue (if we are not,
1008                          * we have other problems) - Jean II */
1009                         skb_next = skb_peek(&self->txq);
1010
1011                         /* Check if a subsequent skb exist and would fit in
1012                          * the current window (with respect to turnaround
1013                          * time).
1014                          * This allow us to properly mark the current packet
1015                          * with the pf bit, to avoid falling back on the
1016                          * second test below, and avoid waiting the
1017                          * end of the window and sending a extra RR.
1018                          * Note : (skb_next != NULL) <=> (skb_queue_len() > 0)
1019                          * Jean II */
1020                         nextfit = ((skb_next != NULL) &&
1021                                    ((skb_next->len + skb->len) <=
1022                                     self->bytes_left));
1023
1024                         /*
1025                          * The current packet may not fit ! Because of test
1026                          * above, this should not happen any more !!!
1027                          *  Test if we have transmitted more bytes over the
1028                          *  link than its possible to do with the current
1029                          *  speed and turn-around-time.
1030                          */
1031                         if((!nextfit) && (skb->len > self->bytes_left)) {
1032                                 IRDA_DEBUG(0, "%s(), Not allowed to transmit"
1033                                            " more bytes!\n", __func__);
1034                                 /* Requeue the skb */
1035                                 skb_queue_head(&self->txq, skb_get(skb));
1036                                 /*
1037                                  *  We should switch state to LAP_NRM_P, but
1038                                  *  that is not possible since we must be sure
1039                                  *  that we poll the other side. Since we have
1040                                  *  used up our time, the poll timer should
1041                                  *  trigger anyway now, so we just wait for it
1042                                  *  DB
1043                                  */
1044                                 /*
1045                                  * Sorry, but that's not totally true. If
1046                                  * we send 2000B packets, we may wait another
1047                                  * 1000B until our turnaround expire. That's
1048                                  * why we need to be proactive in avoiding
1049                                  * coming here. - Jean II
1050                                  */
1051                                 return -EPROTO;
1052                         }
1053
1054                         /* Substract space used by this skb */
1055                         self->bytes_left -= skb->len;
1056 #else   /* CONFIG_IRDA_DYNAMIC_WINDOW */
1057                         /* Window has been adjusted for the max packet
1058                          * size, so much simpler... - Jean II */
1059                         nextfit = !skb_queue_empty(&self->txq);
1060 #endif  /* CONFIG_IRDA_DYNAMIC_WINDOW */
1061                         /*
1062                          *  Send data with poll bit cleared only if window > 1
1063                          *  and there is more frames after this one to be sent
1064                          */
1065                         if ((self->window > 1) && (nextfit)) {
1066                                 /* More packet to send in current window */
1067                                 irlap_send_data_primary(self, skb);
1068                                 irlap_next_state(self, LAP_XMIT_P);
1069                         } else {
1070                                 /* Final packet of window */
1071                                 irlap_send_data_primary_poll(self, skb);
1072
1073                                 /*
1074                                  * Make sure state machine does not try to send
1075                                  * any more frames
1076                                  */
1077                                 ret = -EPROTO;
1078                         }
1079 #ifdef CONFIG_IRDA_FAST_RR
1080                         /* Peer may want to reply immediately */
1081                         self->fast_RR = FALSE;
1082 #endif /* CONFIG_IRDA_FAST_RR */
1083                 } else {
1084                         IRDA_DEBUG(4, "%s(), Unable to send! remote busy?\n",
1085                                    __func__);
1086                         skb_queue_head(&self->txq, skb_get(skb));
1087
1088                         /*
1089                          *  The next ret is important, because it tells
1090                          *  irlap_next_state _not_ to deliver more frames
1091                          */
1092                         ret = -EPROTO;
1093                 }
1094                 break;
1095         case POLL_TIMER_EXPIRED:
1096                 IRDA_DEBUG(3, "%s(), POLL_TIMER_EXPIRED <%ld>\n",
1097                             __func__, jiffies);
1098                 irlap_send_rr_frame(self, CMD_FRAME);
1099                 /* Return to NRM properly - Jean II  */
1100                 self->window = self->window_size;
1101 #ifdef CONFIG_IRDA_DYNAMIC_WINDOW
1102                 /* Allowed to transmit a maximum number of bytes again. */
1103                 self->bytes_left = self->line_capacity;
1104 #endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
1105                 irlap_start_final_timer(self, self->final_timeout);
1106                 irlap_next_state(self, LAP_NRM_P);
1107                 break;
1108         case DISCONNECT_REQUEST:
1109                 del_timer(&self->poll_timer);
1110                 irlap_wait_min_turn_around(self, &self->qos_tx);
1111                 irlap_send_disc_frame(self);
1112                 irlap_flush_all_queues(self);
1113                 irlap_start_final_timer(self, self->final_timeout);
1114                 self->retry_count = 0;
1115                 irlap_next_state(self, LAP_PCLOSE);
1116                 break;
1117         case DATA_REQUEST:
1118                 /* Nothing to do, irlap_do_event() will send the packet
1119                  * when we return... - Jean II */
1120                 break;
1121         default:
1122                 IRDA_DEBUG(0, "%s(), Unknown event %s\n",
1123                            __func__, irlap_event[event]);
1124
1125                 ret = -EINVAL;
1126                 break;
1127         }
1128         return ret;
1129 }
1130
1131 /*
1132  * Function irlap_state_pclose (event, skb, info)
1133  *
1134  *    PCLOSE state
1135  */
1136 static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event,
1137                               struct sk_buff *skb, struct irlap_info *info)
1138 {
1139         int ret = 0;
1140
1141         IRDA_DEBUG(1, "%s()\n", __func__);
1142
1143         IRDA_ASSERT(self != NULL, return -1;);
1144         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
1145
1146         switch (event) {
1147         case RECV_UA_RSP: /* FALLTHROUGH */
1148         case RECV_DM_RSP:
1149                 del_timer(&self->final_timer);
1150
1151                 /* Set new link parameters */
1152                 irlap_apply_default_connection_parameters(self);
1153
1154                 /* Always switch state before calling upper layers */
1155                 irlap_next_state(self, LAP_NDM);
1156
1157                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
1158                 break;
1159         case FINAL_TIMER_EXPIRED:
1160                 if (self->retry_count < self->N3) {
1161                         irlap_wait_min_turn_around(self, &self->qos_tx);
1162                         irlap_send_disc_frame(self);
1163                         irlap_start_final_timer(self, self->final_timeout);
1164                         self->retry_count++;
1165                         /* Keep state */
1166                 } else {
1167                         irlap_apply_default_connection_parameters(self);
1168
1169                         /*  Always switch state before calling upper layers */
1170                         irlap_next_state(self, LAP_NDM);
1171
1172                         irlap_disconnect_indication(self, LAP_NO_RESPONSE);
1173                 }
1174                 break;
1175         default:
1176                 IRDA_DEBUG(1, "%s(), Unknown event %d\n", __func__, event);
1177
1178                 ret = -1;
1179                 break;
1180         }
1181         return ret;
1182 }
1183
1184 /*
1185  * Function irlap_state_nrm_p (self, event, skb, info)
1186  *
1187  *   NRM_P (Normal Response Mode as Primary), The primary station has given
1188  *   permissions to a secondary station to transmit IrLAP resonse frames
1189  *   (by sending a frame with the P bit set). The primary station will not
1190  *   transmit any frames and is expecting to receive frames only from the
1191  *   secondary to which transmission permissions has been given.
1192  */
1193 static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event,
1194                              struct sk_buff *skb, struct irlap_info *info)
1195 {
1196         int ret = 0;
1197         int ns_status;
1198         int nr_status;
1199
1200         switch (event) {
1201         case RECV_I_RSP: /* Optimize for the common case */
1202                 if (unlikely(skb->len <= LAP_ADDR_HEADER + LAP_CTRL_HEADER)) {
1203                         /*
1204                          * Input validation check: a stir4200/mcp2150
1205                          * combination sometimes results in an empty i:rsp.
1206                          * This makes no sense; we can just ignore the frame
1207                          * and send an rr:cmd immediately. This happens before
1208                          * changing nr or ns so triggers a retransmit
1209                          */
1210                         irlap_wait_min_turn_around(self, &self->qos_tx);
1211                         irlap_send_rr_frame(self, CMD_FRAME);
1212                         /* Keep state */
1213                         break;
1214                 }
1215                 /* FIXME: must check for remote_busy below */
1216 #ifdef CONFIG_IRDA_FAST_RR
1217                 /*
1218                  *  Reset the fast_RR so we can use the fast RR code with
1219                  *  full speed the next time since peer may have more frames
1220                  *  to transmitt
1221                  */
1222                 self->fast_RR = FALSE;
1223 #endif /* CONFIG_IRDA_FAST_RR */
1224                 IRDA_ASSERT( info != NULL, return -1;);
1225
1226                 ns_status = irlap_validate_ns_received(self, info->ns);
1227                 nr_status = irlap_validate_nr_received(self, info->nr);
1228
1229                 /*
1230                  *  Check for expected I(nformation) frame
1231                  */
1232                 if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
1233
1234                         /* Update Vr (next frame for us to receive) */
1235                         self->vr = (self->vr + 1) % 8;
1236
1237                         /* Update Nr received, cleanup our retry queue */
1238                         irlap_update_nr_received(self, info->nr);
1239
1240                         /*
1241                          *  Got expected NR, so reset the
1242                          *  retry_count. This is not done by IrLAP spec,
1243                          *  which is strange!
1244                          */
1245                         self->retry_count = 0;
1246                         self->ack_required = TRUE;
1247
1248                         /*  poll bit cleared?  */
1249                         if (!info->pf) {
1250                                 /* Keep state, do not move this line */
1251                                 irlap_next_state(self, LAP_NRM_P);
1252
1253                                 irlap_data_indication(self, skb, FALSE);
1254                         } else {
1255                                 /* No longer waiting for pf */
1256                                 del_timer(&self->final_timer);
1257
1258                                 irlap_wait_min_turn_around(self, &self->qos_tx);
1259
1260                                 /* Call higher layer *before* changing state
1261                                  * to give them a chance to send data in the
1262                                  * next LAP frame.
1263                                  * Jean II */
1264                                 irlap_data_indication(self, skb, FALSE);
1265
1266                                 /* XMIT states are the most dangerous state
1267                                  * to be in, because user requests are
1268                                  * processed directly and may change state.
1269                                  * On the other hand, in NDM_P, those
1270                                  * requests are queued and we will process
1271                                  * them when we return to irlap_do_event().
1272                                  * Jean II
1273                                  */
1274                                 irlap_next_state(self, LAP_XMIT_P);
1275
1276                                 /* This is the last frame.
1277                                  * Make sure it's always called in XMIT state.
1278                                  * - Jean II */
1279                                 irlap_start_poll_timer(self, self->poll_timeout);
1280                         }
1281                         break;
1282
1283                 }
1284                 /* Unexpected next to send (Ns) */
1285                 if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
1286                 {
1287                         if (!info->pf) {
1288                                 irlap_update_nr_received(self, info->nr);
1289
1290                                 /*
1291                                  *  Wait until the last frame before doing
1292                                  *  anything
1293                                  */
1294
1295                                 /* Keep state */
1296                                 irlap_next_state(self, LAP_NRM_P);
1297                         } else {
1298                                 IRDA_DEBUG(4,
1299                                        "%s(), missing or duplicate frame!\n",
1300                                            __func__);
1301
1302                                 /* Update Nr received */
1303                                 irlap_update_nr_received(self, info->nr);
1304
1305                                 irlap_wait_min_turn_around(self, &self->qos_tx);
1306                                 irlap_send_rr_frame(self, CMD_FRAME);
1307
1308                                 self->ack_required = FALSE;
1309
1310                                 irlap_start_final_timer(self, self->final_timeout);
1311                                 irlap_next_state(self, LAP_NRM_P);
1312                         }
1313                         break;
1314                 }
1315                 /*
1316                  *  Unexpected next to receive (Nr)
1317                  */
1318                 if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
1319                 {
1320                         if (info->pf) {
1321                                 self->vr = (self->vr + 1) % 8;
1322
1323                                 /* Update Nr received */
1324                                 irlap_update_nr_received(self, info->nr);
1325
1326                                 /* Resend rejected frames */
1327                                 irlap_resend_rejected_frames(self, CMD_FRAME);
1328
1329                                 self->ack_required = FALSE;
1330
1331                                 /* Make sure we account for the time
1332                                  * to transmit our frames. See comemnts
1333                                  * in irlap_send_data_primary_poll().
1334                                  * Jean II */
1335                                 irlap_start_final_timer(self, 2 * self->final_timeout);
1336
1337                                 /* Keep state, do not move this line */
1338                                 irlap_next_state(self, LAP_NRM_P);
1339
1340                                 irlap_data_indication(self, skb, FALSE);
1341                         } else {
1342                                 /*
1343                                  *  Do not resend frames until the last
1344                                  *  frame has arrived from the other
1345                                  *  device. This is not documented in
1346                                  *  IrLAP!!
1347                                  */
1348                                 self->vr = (self->vr + 1) % 8;
1349
1350                                 /* Update Nr received */
1351                                 irlap_update_nr_received(self, info->nr);
1352
1353                                 self->ack_required = FALSE;
1354
1355                                 /* Keep state, do not move this line!*/
1356                                 irlap_next_state(self, LAP_NRM_P);
1357
1358                                 irlap_data_indication(self, skb, FALSE);
1359                         }
1360                         break;
1361                 }
1362                 /*
1363                  *  Unexpected next to send (Ns) and next to receive (Nr)
1364                  *  Not documented by IrLAP!
1365                  */
1366                 if ((ns_status == NS_UNEXPECTED) &&
1367                     (nr_status == NR_UNEXPECTED))
1368                 {
1369                         IRDA_DEBUG(4, "%s(), unexpected nr and ns!\n",
1370                                    __func__);
1371                         if (info->pf) {
1372                                 /* Resend rejected frames */
1373                                 irlap_resend_rejected_frames(self, CMD_FRAME);
1374
1375                                 /* Give peer some time to retransmit!
1376                                  * But account for our own Tx. */
1377                                 irlap_start_final_timer(self, 2 * self->final_timeout);
1378
1379                                 /* Keep state, do not move this line */
1380                                 irlap_next_state(self, LAP_NRM_P);
1381                         } else {
1382                                 /* Update Nr received */
1383                                 /* irlap_update_nr_received( info->nr); */
1384
1385                                 self->ack_required = FALSE;
1386                         }
1387                         break;
1388                 }
1389
1390                 /*
1391                  *  Invalid NR or NS
1392                  */
1393                 if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) {
1394                         if (info->pf) {
1395                                 del_timer(&self->final_timer);
1396
1397                                 irlap_next_state(self, LAP_RESET_WAIT);
1398
1399                                 irlap_disconnect_indication(self, LAP_RESET_INDICATION);
1400                                 self->xmitflag = TRUE;
1401                         } else {
1402                                 del_timer(&self->final_timer);
1403
1404                                 irlap_disconnect_indication(self, LAP_RESET_INDICATION);
1405
1406                                 self->xmitflag = FALSE;
1407                         }
1408                         break;
1409                 }
1410                 IRDA_DEBUG(1, "%s(), Not implemented!\n", __func__);
1411                 IRDA_DEBUG(1, "%s(), event=%s, ns_status=%d, nr_status=%d\n",
1412                        __func__, irlap_event[event], ns_status, nr_status);
1413                 break;
1414         case RECV_UI_FRAME:
1415                 /* Poll bit cleared? */
1416                 if (!info->pf) {
1417                         irlap_data_indication(self, skb, TRUE);
1418                         irlap_next_state(self, LAP_NRM_P);
1419                 } else {
1420                         del_timer(&self->final_timer);
1421                         irlap_data_indication(self, skb, TRUE);
1422                         irlap_next_state(self, LAP_XMIT_P);
1423                         IRDA_DEBUG(1, "%s: RECV_UI_FRAME: next state %s\n", __func__, irlap_state[self->state]);
1424                         irlap_start_poll_timer(self, self->poll_timeout);
1425                 }
1426                 break;
1427         case RECV_RR_RSP:
1428                 /*
1429                  *  If you get a RR, the remote isn't busy anymore,
1430                  *  no matter what the NR
1431                  */
1432                 self->remote_busy = FALSE;
1433
1434                 /* Stop final timer */
1435                 del_timer(&self->final_timer);
1436
1437                 /*
1438                  *  Nr as expected?
1439                  */
1440                 ret = irlap_validate_nr_received(self, info->nr);
1441                 if (ret == NR_EXPECTED) {
1442                         /* Update Nr received */
1443                         irlap_update_nr_received(self, info->nr);
1444
1445                         /*
1446                          *  Got expected NR, so reset the retry_count. This
1447                          *  is not done by the IrLAP standard , which is
1448                          *  strange! DB.
1449                          */
1450                         self->retry_count = 0;
1451                         irlap_wait_min_turn_around(self, &self->qos_tx);
1452
1453                         irlap_next_state(self, LAP_XMIT_P);
1454
1455                         /* Start poll timer */
1456                         irlap_start_poll_timer(self, self->poll_timeout);
1457                 } else if (ret == NR_UNEXPECTED) {
1458                         IRDA_ASSERT(info != NULL, return -1;);
1459                         /*
1460                          *  Unexpected nr!
1461                          */
1462
1463                         /* Update Nr received */
1464                         irlap_update_nr_received(self, info->nr);
1465
1466                         IRDA_DEBUG(4, "RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, "
1467                               "vs=%d, vr=%d\n",
1468                               self->retry_count, info->nr, self->va,
1469                               self->vs, self->vr);
1470
1471                         /* Resend rejected frames */
1472                         irlap_resend_rejected_frames(self, CMD_FRAME);
1473                         irlap_start_final_timer(self, self->final_timeout * 2);
1474
1475                         irlap_next_state(self, LAP_NRM_P);
1476                 } else if (ret == NR_INVALID) {
1477                         IRDA_DEBUG(1, "%s(), Received RR with "
1478                                    "invalid nr !\n", __func__);
1479
1480                         irlap_next_state(self, LAP_RESET_WAIT);
1481
1482                         irlap_disconnect_indication(self, LAP_RESET_INDICATION);
1483                         self->xmitflag = TRUE;
1484                 }
1485                 break;
1486         case RECV_RNR_RSP:
1487                 IRDA_ASSERT(info != NULL, return -1;);
1488
1489                 /* Stop final timer */
1490                 del_timer(&self->final_timer);
1491                 self->remote_busy = TRUE;
1492
1493                 /* Update Nr received */
1494                 irlap_update_nr_received(self, info->nr);
1495                 irlap_next_state(self, LAP_XMIT_P);
1496
1497                 /* Start poll timer */
1498                 irlap_start_poll_timer(self, self->poll_timeout);
1499                 break;
1500         case RECV_FRMR_RSP:
1501                 del_timer(&self->final_timer);
1502                 self->xmitflag = TRUE;
1503                 irlap_next_state(self, LAP_RESET_WAIT);
1504                 irlap_reset_indication(self);
1505                 break;
1506         case FINAL_TIMER_EXPIRED:
1507                 /*
1508                  *  We are allowed to wait for additional 300 ms if
1509                  *  final timer expires when we are in the middle
1510                  *  of receiving a frame (page 45, IrLAP). Check that
1511                  *  we only do this once for each frame.
1512                  */
1513                 if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
1514                         IRDA_DEBUG(1, "FINAL_TIMER_EXPIRED when receiving a "
1515                               "frame! Waiting a little bit more!\n");
1516                         irlap_start_final_timer(self, msecs_to_jiffies(300));
1517
1518                         /*
1519                          *  Don't allow this to happen one more time in a row,
1520                          *  or else we can get a pretty tight loop here if
1521                          *  if we only receive half a frame. DB.
1522                          */
1523                         self->add_wait = TRUE;
1524                         break;
1525                 }
1526                 self->add_wait = FALSE;
1527
1528                 /* N2 is the disconnect timer. Until we reach it, we retry */
1529                 if (self->retry_count < self->N2) {
1530                         if (skb_peek(&self->wx_list) == NULL) {
1531                                 /* Retry sending the pf bit to the secondary */
1532                                 IRDA_DEBUG(4, "nrm_p: resending rr");
1533                                 irlap_wait_min_turn_around(self, &self->qos_tx);
1534                                 irlap_send_rr_frame(self, CMD_FRAME);
1535                         } else {
1536                                 IRDA_DEBUG(4, "nrm_p: resend frames");
1537                                 irlap_resend_rejected_frames(self, CMD_FRAME);
1538                         }
1539
1540                         irlap_start_final_timer(self, self->final_timeout);
1541                         self->retry_count++;
1542                         IRDA_DEBUG(4, "irlap_state_nrm_p: FINAL_TIMER_EXPIRED:"
1543                                    " retry_count=%d\n", self->retry_count);
1544
1545                         /* Early warning event. I'm using a pretty liberal
1546                          * interpretation of the spec and generate an event
1547                          * every time the timer is multiple of N1 (and not
1548                          * only the first time). This allow application
1549                          * to know precisely if connectivity restart...
1550                          * Jean II */
1551                         if((self->retry_count % self->N1) == 0)
1552                                 irlap_status_indication(self,
1553                                                         STATUS_NO_ACTIVITY);
1554
1555                         /* Keep state */
1556                 } else {
1557                         irlap_apply_default_connection_parameters(self);
1558
1559                         /* Always switch state before calling upper layers */
1560                         irlap_next_state(self, LAP_NDM);
1561                         irlap_disconnect_indication(self, LAP_NO_RESPONSE);
1562                 }
1563                 break;
1564         case RECV_REJ_RSP:
1565                 irlap_update_nr_received(self, info->nr);
1566                 if (self->remote_busy) {
1567                         irlap_wait_min_turn_around(self, &self->qos_tx);
1568                         irlap_send_rr_frame(self, CMD_FRAME);
1569                 } else
1570                         irlap_resend_rejected_frames(self, CMD_FRAME);
1571                 irlap_start_final_timer(self, 2 * self->final_timeout);
1572                 break;
1573         case RECV_SREJ_RSP:
1574                 irlap_update_nr_received(self, info->nr);
1575                 if (self->remote_busy) {
1576                         irlap_wait_min_turn_around(self, &self->qos_tx);
1577                         irlap_send_rr_frame(self, CMD_FRAME);
1578                 } else
1579                         irlap_resend_rejected_frame(self, CMD_FRAME);
1580                 irlap_start_final_timer(self, 2 * self->final_timeout);
1581                 break;
1582         case RECV_RD_RSP:
1583                 IRDA_DEBUG(1, "%s(), RECV_RD_RSP\n", __func__);
1584
1585                 irlap_flush_all_queues(self);
1586                 irlap_next_state(self, LAP_XMIT_P);
1587                 /* Call back the LAP state machine to do a proper disconnect */
1588                 irlap_disconnect_request(self);
1589                 break;
1590         default:
1591                 IRDA_DEBUG(1, "%s(), Unknown event %s\n",
1592                             __func__, irlap_event[event]);
1593
1594                 ret = -1;
1595                 break;
1596         }
1597         return ret;
1598 }
1599
1600 /*
1601  * Function irlap_state_reset_wait (event, skb, info)
1602  *
1603  *    We have informed the service user of a reset condition, and is
1604  *    awaiting reset of disconnect request.
1605  *
1606  */
1607 static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
1608                                   struct sk_buff *skb, struct irlap_info *info)
1609 {
1610         int ret = 0;
1611
1612         IRDA_DEBUG(3, "%s(), event = %s\n", __func__, irlap_event[event]);
1613
1614         IRDA_ASSERT(self != NULL, return -1;);
1615         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
1616
1617         switch (event) {
1618         case RESET_REQUEST:
1619                 if (self->xmitflag) {
1620                         irlap_wait_min_turn_around(self, &self->qos_tx);
1621                         irlap_send_snrm_frame(self, NULL);
1622                         irlap_start_final_timer(self, self->final_timeout);
1623                         irlap_next_state(self, LAP_RESET);
1624                 } else {
1625                         irlap_start_final_timer(self, self->final_timeout);
1626                         irlap_next_state(self, LAP_RESET);
1627                 }
1628                 break;
1629         case DISCONNECT_REQUEST:
1630                 irlap_wait_min_turn_around( self, &self->qos_tx);
1631                 irlap_send_disc_frame( self);
1632                 irlap_flush_all_queues( self);
1633                 irlap_start_final_timer( self, self->final_timeout);
1634                 self->retry_count = 0;
1635                 irlap_next_state( self, LAP_PCLOSE);
1636                 break;
1637         default:
1638                 IRDA_DEBUG(2, "%s(), Unknown event %s\n", __func__,
1639                            irlap_event[event]);
1640
1641                 ret = -1;
1642                 break;
1643         }
1644         return ret;
1645 }
1646
1647 /*
1648  * Function irlap_state_reset (self, event, skb, info)
1649  *
1650  *    We have sent a SNRM reset command to the peer layer, and is awaiting
1651  *    reply.
1652  *
1653  */
1654 static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event,
1655                              struct sk_buff *skb, struct irlap_info *info)
1656 {
1657         int ret = 0;
1658
1659         IRDA_DEBUG(3, "%s(), event = %s\n", __func__, irlap_event[event]);
1660
1661         IRDA_ASSERT(self != NULL, return -1;);
1662         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
1663
1664         switch (event) {
1665         case RECV_DISC_CMD:
1666                 del_timer(&self->final_timer);
1667
1668                 irlap_apply_default_connection_parameters(self);
1669
1670                 /* Always switch state before calling upper layers */
1671                 irlap_next_state(self, LAP_NDM);
1672
1673                 irlap_disconnect_indication(self, LAP_NO_RESPONSE);
1674
1675                 break;
1676         case RECV_UA_RSP:
1677                 del_timer(&self->final_timer);
1678
1679                 /* Initiate connection state */
1680                 irlap_initiate_connection_state(self);
1681
1682                 irlap_reset_confirm();
1683
1684                 self->remote_busy = FALSE;
1685
1686                 irlap_next_state(self, LAP_XMIT_P);
1687
1688                 irlap_start_poll_timer(self, self->poll_timeout);
1689
1690                 break;
1691         case FINAL_TIMER_EXPIRED:
1692                 if (self->retry_count < 3) {
1693                         irlap_wait_min_turn_around(self, &self->qos_tx);
1694
1695                         IRDA_ASSERT(self->netdev != NULL, return -1;);
1696                         irlap_send_snrm_frame(self, self->qos_dev);
1697
1698                         self->retry_count++; /* Experimental!! */
1699
1700                         irlap_start_final_timer(self, self->final_timeout);
1701                         irlap_next_state(self, LAP_RESET);
1702                 } else if (self->retry_count >= self->N3) {
1703                         irlap_apply_default_connection_parameters(self);
1704
1705                         /* Always switch state before calling upper layers */
1706                         irlap_next_state(self, LAP_NDM);
1707
1708                         irlap_disconnect_indication(self, LAP_NO_RESPONSE);
1709                 }
1710                 break;
1711         case RECV_SNRM_CMD:
1712                 /*
1713                  * SNRM frame is not allowed to contain an I-field in this
1714                  * state
1715                  */
1716                 if (!info) {
1717                         IRDA_DEBUG(3, "%s(), RECV_SNRM_CMD\n", __func__);
1718                         irlap_initiate_connection_state(self);
1719                         irlap_wait_min_turn_around(self, &self->qos_tx);
1720                         irlap_send_ua_response_frame(self, &self->qos_rx);
1721                         irlap_reset_confirm();
1722                         irlap_start_wd_timer(self, self->wd_timeout);
1723                         irlap_next_state(self, LAP_NDM);
1724                 } else {
1725                         IRDA_DEBUG(0,
1726                                    "%s(), SNRM frame contained an I field!\n",
1727                                    __func__);
1728                 }
1729                 break;
1730         default:
1731                 IRDA_DEBUG(1, "%s(), Unknown event %s\n",
1732                            __func__, irlap_event[event]);
1733
1734                 ret = -1;
1735                 break;
1736         }
1737         return ret;
1738 }
1739
1740 /*
1741  * Function irlap_state_xmit_s (event, skb, info)
1742  *
1743  *   XMIT_S, The secondary station has been given the right to transmit,
1744  *   and we therefor do not expect to receive any transmissions from other
1745  *   stations.
1746  */
1747 static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
1748                               struct sk_buff *skb, struct irlap_info *info)
1749 {
1750         int ret = 0;
1751
1752         IRDA_DEBUG(4, "%s(), event=%s\n", __func__, irlap_event[event]);
1753
1754         IRDA_ASSERT(self != NULL, return -ENODEV;);
1755         IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
1756
1757         switch (event) {
1758         case SEND_I_CMD:
1759                 /*
1760                  *  Send frame only if send window > 0
1761                  */
1762                 if ((self->window > 0) && (!self->remote_busy)) {
1763                         int nextfit;
1764 #ifdef CONFIG_IRDA_DYNAMIC_WINDOW
1765                         struct sk_buff *skb_next;
1766
1767                         /*
1768                          * Same deal as in irlap_state_xmit_p(), so see
1769                          * the comments at that point.
1770                          * We are the secondary, so there are only subtle
1771                          * differences. - Jean II
1772                          */
1773
1774                         /* Check if a subsequent skb exist and would fit in
1775                          * the current window (with respect to turnaround
1776                          * time). - Jean II */
1777                         skb_next = skb_peek(&self->txq);
1778                         nextfit = ((skb_next != NULL) &&
1779                                    ((skb_next->len + skb->len) <=
1780                                     self->bytes_left));
1781
1782                         /*
1783                          *  Test if we have transmitted more bytes over the
1784                          *  link than its possible to do with the current
1785                          *  speed and turn-around-time.
1786                          */
1787                         if((!nextfit) && (skb->len > self->bytes_left)) {
1788                                 IRDA_DEBUG(0, "%s(), Not allowed to transmit"
1789                                            " more bytes!\n", __func__);
1790                                 /* Requeue the skb */
1791                                 skb_queue_head(&self->txq, skb_get(skb));
1792
1793                                 /*
1794                                  *  Switch to NRM_S, this is only possible
1795                                  *  when we are in secondary mode, since we
1796                                  *  must be sure that we don't miss any RR
1797                                  *  frames
1798                                  */
1799                                 self->window = self->window_size;
1800                                 self->bytes_left = self->line_capacity;
1801                                 irlap_start_wd_timer(self, self->wd_timeout);
1802
1803                                 irlap_next_state(self, LAP_NRM_S);
1804                                 /* Slight difference with primary :
1805                                  * here we would wait for the other side to
1806                                  * expire the turnaround. - Jean II */
1807
1808                                 return -EPROTO; /* Try again later */
1809                         }
1810                         /* Substract space used by this skb */
1811                         self->bytes_left -= skb->len;
1812 #else   /* CONFIG_IRDA_DYNAMIC_WINDOW */
1813                         /* Window has been adjusted for the max packet
1814                          * size, so much simpler... - Jean II */
1815                         nextfit = !skb_queue_empty(&self->txq);
1816 #endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
1817                         /*
1818                          *  Send data with final bit cleared only if window > 1
1819                          *  and there is more frames to be sent
1820                          */
1821                         if ((self->window > 1) && (nextfit)) {
1822                                 irlap_send_data_secondary(self, skb);
1823                                 irlap_next_state(self, LAP_XMIT_S);
1824                         } else {
1825                                 irlap_send_data_secondary_final(self, skb);
1826                                 irlap_next_state(self, LAP_NRM_S);
1827
1828                                 /*
1829                                  * Make sure state machine does not try to send
1830                                  * any more frames
1831                                  */
1832                                 ret = -EPROTO;
1833                         }
1834                 } else {
1835                         IRDA_DEBUG(2, "%s(), Unable to send!\n", __func__);
1836                         skb_queue_head(&self->txq, skb_get(skb));
1837                         ret = -EPROTO;
1838                 }
1839                 break;
1840         case DISCONNECT_REQUEST:
1841                 irlap_send_rd_frame(self);
1842                 irlap_flush_all_queues(self);
1843                 irlap_start_wd_timer(self, self->wd_timeout);
1844                 irlap_next_state(self, LAP_SCLOSE);
1845                 break;
1846         case DATA_REQUEST:
1847                 /* Nothing to do, irlap_do_event() will send the packet
1848                  * when we return... - Jean II */
1849                 break;
1850         default:
1851                 IRDA_DEBUG(2, "%s(), Unknown event %s\n", __func__,
1852                            irlap_event[event]);
1853
1854                 ret = -EINVAL;
1855                 break;
1856         }
1857         return ret;
1858 }
1859
1860 /*
1861  * Function irlap_state_nrm_s (event, skb, info)
1862  *
1863  *    NRM_S (Normal Response Mode as Secondary) state, in this state we are
1864  *    expecting to receive frames from the primary station
1865  *
1866  */
1867 static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event,
1868                              struct sk_buff *skb, struct irlap_info *info)
1869 {
1870         int ns_status;
1871         int nr_status;
1872         int ret = 0;
1873
1874         IRDA_DEBUG(4, "%s(), event=%s\n", __func__, irlap_event[ event]);
1875
1876         IRDA_ASSERT(self != NULL, return -1;);
1877         IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
1878
1879         switch (event) {
1880         case RECV_I_CMD: /* Optimize for the common case */
1881                 /* FIXME: must check for remote_busy below */
1882                 IRDA_DEBUG(4, "%s(), event=%s nr=%d, vs=%d, ns=%d, "
1883                            "vr=%d, pf=%d\n", __func__,
1884                            irlap_event[event], info->nr,
1885                            self->vs, info->ns, self->vr, info->pf);
1886
1887                 self->retry_count = 0;
1888
1889                 ns_status = irlap_validate_ns_received(self, info->ns);
1890                 nr_status = irlap_validate_nr_received(self, info->nr);
1891                 /*
1892                  *  Check for expected I(nformation) frame
1893                  */
1894                 if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
1895
1896                         /* Update Vr (next frame for us to receive) */
1897                         self->vr = (self->vr + 1) % 8;
1898
1899                         /* Update Nr received */
1900                         irlap_update_nr_received(self, info->nr);
1901
1902                         /*
1903                          *  poll bit cleared?
1904                          */
1905                         if (!info->pf) {
1906
1907                                 self->ack_required = TRUE;
1908
1909                                 /*
1910                                  *  Starting WD-timer here is optional, but
1911                                  *  not recommended. Note 6 IrLAP p. 83
1912                                  */
1913 #if 0
1914                                 irda_start_timer(WD_TIMER, self->wd_timeout);
1915 #endif
1916                                 /* Keep state, do not move this line */
1917                                 irlap_next_state(self, LAP_NRM_S);
1918
1919                                 irlap_data_indication(self, skb, FALSE);
1920                                 break;
1921                         } else {
1922                                 /*
1923                                  *  We should wait before sending RR, and
1924                                  *  also before changing to XMIT_S
1925                                  *  state. (note 1, IrLAP p. 82)
1926                                  */
1927                                 irlap_wait_min_turn_around(self, &self->qos_tx);
1928
1929                                 /*
1930                                  * Give higher layers a chance to
1931                                  * immediately reply with some data before
1932                                  * we decide if we should send a RR frame
1933                                  * or not
1934                                  */
1935                                 irlap_data_indication(self, skb, FALSE);
1936
1937                                 /* Any pending data requests?  */
1938                                 if (!skb_queue_empty(&self->txq) &&
1939                                     (self->window > 0))
1940                                 {
1941                                         self->ack_required = TRUE;
1942
1943                                         del_timer(&self->wd_timer);
1944
1945                                         irlap_next_state(self, LAP_XMIT_S);
1946                                 } else {
1947                                         irlap_send_rr_frame(self, RSP_FRAME);
1948                                         irlap_start_wd_timer(self,
1949                                                              self->wd_timeout);
1950
1951                                         /* Keep the state */
1952                                         irlap_next_state(self, LAP_NRM_S);
1953                                 }
1954                                 break;
1955                         }
1956                 }
1957                 /*
1958                  *  Check for Unexpected next to send (Ns)
1959                  */
1960                 if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
1961                 {
1962                         /* Unexpected next to send, with final bit cleared */
1963                         if (!info->pf) {
1964                                 irlap_update_nr_received(self, info->nr);
1965
1966                                 irlap_start_wd_timer(self, self->wd_timeout);
1967                         } else {
1968                                 /* Update Nr received */
1969                                 irlap_update_nr_received(self, info->nr);
1970
1971                                 irlap_wait_min_turn_around(self, &self->qos_tx);
1972                                 irlap_send_rr_frame(self, RSP_FRAME);
1973
1974                                 irlap_start_wd_timer(self, self->wd_timeout);
1975                         }
1976                         break;
1977                 }
1978
1979                 /*
1980                  *  Unexpected Next to Receive(NR) ?
1981                  */
1982                 if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
1983                 {
1984                         if (info->pf) {
1985                                 IRDA_DEBUG(4, "RECV_I_RSP: frame(s) lost\n");
1986
1987                                 self->vr = (self->vr + 1) % 8;
1988
1989                                 /* Update Nr received */
1990                                 irlap_update_nr_received(self, info->nr);
1991
1992                                 /* Resend rejected frames */
1993                                 irlap_resend_rejected_frames(self, RSP_FRAME);
1994
1995                                 /* Keep state, do not move this line */
1996                                 irlap_next_state(self, LAP_NRM_S);
1997
1998                                 irlap_data_indication(self, skb, FALSE);
1999                                 irlap_start_wd_timer(self, self->wd_timeout);
2000                                 break;
2001                         }
2002                         /*
2003                          *  This is not documented in IrLAP!! Unexpected NR
2004                          *  with poll bit cleared
2005                          */
2006                         if (!info->pf) {
2007                                 self->vr = (self->vr + 1) % 8;
2008
2009                                 /* Update Nr received */
2010                                 irlap_update_nr_received(self, info->nr);
2011
2012                                 /* Keep state, do not move this line */
2013                                 irlap_next_state(self, LAP_NRM_S);
2014
2015                                 irlap_data_indication(self, skb, FALSE);
2016                                 irlap_start_wd_timer(self, self->wd_timeout);
2017                         }
2018                         break;
2019                 }
2020
2021                 if (ret == NR_INVALID) {
2022                         IRDA_DEBUG(0, "NRM_S, NR_INVALID not implemented!\n");
2023                 }
2024                 if (ret == NS_INVALID) {
2025                         IRDA_DEBUG(0, "NRM_S, NS_INVALID not implemented!\n");
2026                 }
2027                 break;
2028         case RECV_UI_FRAME:
2029                 /*
2030                  *  poll bit cleared?
2031                  */
2032                 if (!info->pf) {
2033                         irlap_data_indication(self, skb, TRUE);
2034                         irlap_next_state(self, LAP_NRM_S); /* Keep state */
2035                 } else {
2036                         /*
2037                          *  Any pending data requests?
2038                          */
2039                         if (!skb_queue_empty(&self->txq) &&
2040                             (self->window > 0) && !self->remote_busy)
2041                         {
2042                                 irlap_data_indication(self, skb, TRUE);
2043
2044                                 del_timer(&self->wd_timer);
2045
2046                                 irlap_next_state(self, LAP_XMIT_S);
2047                         } else {
2048                                 irlap_data_indication(self, skb, TRUE);
2049
2050                                 irlap_wait_min_turn_around(self, &self->qos_tx);
2051
2052                                 irlap_send_rr_frame(self, RSP_FRAME);
2053                                 self->ack_required = FALSE;
2054
2055                                 irlap_start_wd_timer(self, self->wd_timeout);
2056
2057                                 /* Keep the state */
2058                                 irlap_next_state(self, LAP_NRM_S);
2059                         }
2060                 }
2061                 break;
2062         case RECV_RR_CMD:
2063                 self->retry_count = 0;
2064
2065                 /*
2066                  *  Nr as expected?
2067                  */
2068                 nr_status = irlap_validate_nr_received(self, info->nr);
2069                 if (nr_status == NR_EXPECTED) {
2070                         if (!skb_queue_empty(&self->txq) &&
2071                             (self->window > 0)) {
2072                                 self->remote_busy = FALSE;
2073
2074                                 /* Update Nr received */
2075                                 irlap_update_nr_received(self, info->nr);
2076                                 del_timer(&self->wd_timer);
2077
2078                                 irlap_wait_min_turn_around(self, &self->qos_tx);
2079                                 irlap_next_state(self, LAP_XMIT_S);
2080                         } else {
2081                                 self->remote_busy = FALSE;
2082                                 /* Update Nr received */
2083                                 irlap_update_nr_received(self, info->nr);
2084                                 irlap_wait_min_turn_around(self, &self->qos_tx);
2085                                 irlap_start_wd_timer(self, self->wd_timeout);
2086
2087                                 /* Note : if the link is idle (this case),
2088                                  * we never go in XMIT_S, so we never get a
2089                                  * chance to process any DISCONNECT_REQUEST.
2090                                  * Do it now ! - Jean II */
2091                                 if (self->disconnect_pending) {
2092                                         /* Disconnect */
2093                                         irlap_send_rd_frame(self);
2094                                         irlap_flush_all_queues(self);
2095
2096                                         irlap_next_state(self, LAP_SCLOSE);
2097                                 } else {
2098                                         /* Just send back pf bit */
2099                                         irlap_send_rr_frame(self, RSP_FRAME);
2100
2101                                         irlap_next_state(self, LAP_NRM_S);
2102                                 }
2103                         }
2104                 } else if (nr_status == NR_UNEXPECTED) {
2105                         self->remote_busy = FALSE;
2106                         irlap_update_nr_received(self, info->nr);
2107                         irlap_resend_rejected_frames(self, RSP_FRAME);
2108
2109                         irlap_start_wd_timer(self, self->wd_timeout);
2110
2111                         /* Keep state */
2112                         irlap_next_state(self, LAP_NRM_S);
2113                 } else {
2114                         IRDA_DEBUG(1, "%s(), invalid nr not implemented!\n",
2115                                    __func__);
2116                 }
2117                 break;
2118         case RECV_SNRM_CMD:
2119                 /* SNRM frame is not allowed to contain an I-field */
2120                 if (!info) {
2121                         del_timer(&self->wd_timer);
2122                         IRDA_DEBUG(1, "%s(), received SNRM cmd\n", __func__);
2123                         irlap_next_state(self, LAP_RESET_CHECK);
2124
2125                         irlap_reset_indication(self);
2126                 } else {
2127                         IRDA_DEBUG(0,
2128                                    "%s(), SNRM frame contained an I-field!\n",
2129                                    __func__);
2130
2131                 }
2132                 break;
2133         case RECV_REJ_CMD:
2134                 irlap_update_nr_received(self, info->nr);
2135                 if (self->remote_busy) {
2136                         irlap_wait_min_turn_around(self, &self->qos_tx);
2137                         irlap_send_rr_frame(self, RSP_FRAME);
2138                 } else
2139                         irlap_resend_rejected_frames(self, RSP_FRAME);
2140                 irlap_start_wd_timer(self, self->wd_timeout);
2141                 break;
2142         case RECV_SREJ_CMD:
2143                 irlap_update_nr_received(self, info->nr);
2144                 if (self->remote_busy) {
2145                         irlap_wait_min_turn_around(self, &self->qos_tx);
2146                         irlap_send_rr_frame(self, RSP_FRAME);
2147                 } else
2148                         irlap_resend_rejected_frame(self, RSP_FRAME);
2149                 irlap_start_wd_timer(self, self->wd_timeout);
2150                 break;
2151         case WD_TIMER_EXPIRED:
2152                 /*
2153                  *  Wait until retry_count * n matches negotiated threshold/
2154                  *  disconnect time (note 2 in IrLAP p. 82)
2155                  *
2156                  * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED
2157                  * Note : self->wd_timeout = (self->final_timeout * 2),
2158                  *   which explain why we use (self->N2 / 2) here !!!
2159                  * Jean II
2160                  */
2161                 IRDA_DEBUG(1, "%s(), retry_count = %d\n", __func__,
2162                            self->retry_count);
2163
2164                 if (self->retry_count < (self->N2 / 2)) {
2165                         /* No retry, just wait for primary */
2166                         irlap_start_wd_timer(self, self->wd_timeout);
2167                         self->retry_count++;
2168
2169                         if((self->retry_count % (self->N1 / 2)) == 0)
2170                                 irlap_status_indication(self,
2171                                                         STATUS_NO_ACTIVITY);
2172                 } else {
2173                         irlap_apply_default_connection_parameters(self);
2174
2175                         /* Always switch state before calling upper layers */
2176                         irlap_next_state(self, LAP_NDM);
2177                         irlap_disconnect_indication(self, LAP_NO_RESPONSE);
2178                 }
2179                 break;
2180         case RECV_DISC_CMD:
2181                 /* Always switch state before calling upper layers */
2182                 irlap_next_state(self, LAP_NDM);
2183
2184                 /* Send disconnect response */
2185                 irlap_wait_min_turn_around(self, &self->qos_tx);
2186                 irlap_send_ua_response_frame(self, NULL);
2187
2188                 del_timer(&self->wd_timer);
2189                 irlap_flush_all_queues(self);
2190                 /* Set default link parameters */
2191                 irlap_apply_default_connection_parameters(self);
2192
2193                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
2194                 break;
2195         case RECV_DISCOVERY_XID_CMD:
2196                 irlap_wait_min_turn_around(self, &self->qos_tx);
2197                 irlap_send_rr_frame(self, RSP_FRAME);
2198                 self->ack_required = TRUE;
2199                 irlap_start_wd_timer(self, self->wd_timeout);
2200                 irlap_next_state(self, LAP_NRM_S);
2201
2202                 break;
2203         case RECV_TEST_CMD:
2204                 /* Remove test frame header (only LAP header in NRM) */
2205                 skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
2206
2207                 irlap_wait_min_turn_around(self, &self->qos_tx);
2208                 irlap_start_wd_timer(self, self->wd_timeout);
2209
2210                 /* Send response (info will be copied) */
2211                 irlap_send_test_frame(self, self->caddr, info->daddr, skb);
2212                 break;
2213         default:
2214                 IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __func__,
2215                            event, irlap_event[event]);
2216
2217                 ret = -EINVAL;
2218                 break;
2219         }
2220         return ret;
2221 }
2222
2223 /*
2224  * Function irlap_state_sclose (self, event, skb, info)
2225  */
2226 static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
2227                               struct sk_buff *skb, struct irlap_info *info)
2228 {
2229         int ret = 0;
2230
2231         IRDA_DEBUG(1, "%s()\n", __func__);
2232
2233         IRDA_ASSERT(self != NULL, return -ENODEV;);
2234         IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
2235
2236         switch (event) {
2237         case RECV_DISC_CMD:
2238                 /* Always switch state before calling upper layers */
2239                 irlap_next_state(self, LAP_NDM);
2240
2241                 /* Send disconnect response */
2242                 irlap_wait_min_turn_around(self, &self->qos_tx);
2243                 irlap_send_ua_response_frame(self, NULL);
2244
2245                 del_timer(&self->wd_timer);
2246                 /* Set default link parameters */
2247                 irlap_apply_default_connection_parameters(self);
2248
2249                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
2250                 break;
2251         case RECV_DM_RSP:
2252                 /* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames
2253                  * shall take us down into default NDM state, like DM_RSP
2254                  */
2255         case RECV_RR_RSP:
2256         case RECV_RNR_RSP:
2257         case RECV_REJ_RSP:
2258         case RECV_SREJ_RSP:
2259         case RECV_I_RSP:
2260                 /* Always switch state before calling upper layers */
2261                 irlap_next_state(self, LAP_NDM);
2262
2263                 del_timer(&self->wd_timer);
2264                 irlap_apply_default_connection_parameters(self);
2265
2266                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
2267                 break;
2268         case WD_TIMER_EXPIRED:
2269                 /* Always switch state before calling upper layers */
2270                 irlap_next_state(self, LAP_NDM);
2271
2272                 irlap_apply_default_connection_parameters(self);
2273
2274                 irlap_disconnect_indication(self, LAP_DISC_INDICATION);
2275                 break;
2276         default:
2277                 /* IrLAP-1.1 p.82: in SCLOSE, basically any received frame
2278                  * with pf=1 shall restart the wd-timer and resend the rd:rsp
2279                  */
2280                 if (info != NULL  &&  info->pf) {
2281                         del_timer(&self->wd_timer);
2282                         irlap_wait_min_turn_around(self, &self->qos_tx);
2283                         irlap_send_rd_frame(self);
2284                         irlap_start_wd_timer(self, self->wd_timeout);
2285                         break;          /* stay in SCLOSE */
2286                 }
2287
2288                 IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __func__,
2289                            event, irlap_event[event]);
2290
2291                 ret = -EINVAL;
2292                 break;
2293         }
2294
2295         return -1;
2296 }
2297
2298 static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event,
2299                                    struct sk_buff *skb,
2300                                    struct irlap_info *info)
2301 {
2302         int ret = 0;
2303
2304         IRDA_DEBUG(1, "%s(), event=%s\n", __func__, irlap_event[event]);
2305
2306         IRDA_ASSERT(self != NULL, return -ENODEV;);
2307         IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
2308
2309         switch (event) {
2310         case RESET_RESPONSE:
2311                 irlap_send_ua_response_frame(self, &self->qos_rx);
2312                 irlap_initiate_connection_state(self);
2313                 irlap_start_wd_timer(self, WD_TIMEOUT);
2314                 irlap_flush_all_queues(self);
2315
2316                 irlap_next_state(self, LAP_NRM_S);
2317                 break;
2318         case DISCONNECT_REQUEST:
2319                 irlap_wait_min_turn_around(self, &self->qos_tx);
2320                 irlap_send_rd_frame(self);
2321                 irlap_start_wd_timer(self, WD_TIMEOUT);
2322                 irlap_next_state(self, LAP_SCLOSE);
2323                 break;
2324         default:
2325                 IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __func__,
2326                            event, irlap_event[event]);
2327
2328                 ret = -EINVAL;
2329                 break;
2330         }
2331         return ret;
2332 }