hrtimer: create a "timer_slack" field in the task struct
[linux-2.6.git] / kernel / sys.c
1 /*
2  *  linux/kernel/sys.c
3  *
4  *  Copyright (C) 1991, 1992  Linus Torvalds
5  */
6
7 #include <linux/module.h>
8 #include <linux/mm.h>
9 #include <linux/utsname.h>
10 #include <linux/mman.h>
11 #include <linux/smp_lock.h>
12 #include <linux/notifier.h>
13 #include <linux/reboot.h>
14 #include <linux/prctl.h>
15 #include <linux/highuid.h>
16 #include <linux/fs.h>
17 #include <linux/resource.h>
18 #include <linux/kernel.h>
19 #include <linux/kexec.h>
20 #include <linux/workqueue.h>
21 #include <linux/capability.h>
22 #include <linux/device.h>
23 #include <linux/key.h>
24 #include <linux/times.h>
25 #include <linux/posix-timers.h>
26 #include <linux/security.h>
27 #include <linux/dcookies.h>
28 #include <linux/suspend.h>
29 #include <linux/tty.h>
30 #include <linux/signal.h>
31 #include <linux/cn_proc.h>
32 #include <linux/getcpu.h>
33 #include <linux/task_io_accounting_ops.h>
34 #include <linux/seccomp.h>
35 #include <linux/cpu.h>
36
37 #include <linux/compat.h>
38 #include <linux/syscalls.h>
39 #include <linux/kprobes.h>
40 #include <linux/user_namespace.h>
41
42 #include <asm/uaccess.h>
43 #include <asm/io.h>
44 #include <asm/unistd.h>
45
46 #ifndef SET_UNALIGN_CTL
47 # define SET_UNALIGN_CTL(a,b)   (-EINVAL)
48 #endif
49 #ifndef GET_UNALIGN_CTL
50 # define GET_UNALIGN_CTL(a,b)   (-EINVAL)
51 #endif
52 #ifndef SET_FPEMU_CTL
53 # define SET_FPEMU_CTL(a,b)     (-EINVAL)
54 #endif
55 #ifndef GET_FPEMU_CTL
56 # define GET_FPEMU_CTL(a,b)     (-EINVAL)
57 #endif
58 #ifndef SET_FPEXC_CTL
59 # define SET_FPEXC_CTL(a,b)     (-EINVAL)
60 #endif
61 #ifndef GET_FPEXC_CTL
62 # define GET_FPEXC_CTL(a,b)     (-EINVAL)
63 #endif
64 #ifndef GET_ENDIAN
65 # define GET_ENDIAN(a,b)        (-EINVAL)
66 #endif
67 #ifndef SET_ENDIAN
68 # define SET_ENDIAN(a,b)        (-EINVAL)
69 #endif
70 #ifndef GET_TSC_CTL
71 # define GET_TSC_CTL(a)         (-EINVAL)
72 #endif
73 #ifndef SET_TSC_CTL
74 # define SET_TSC_CTL(a)         (-EINVAL)
75 #endif
76
77 /*
78  * this is where the system-wide overflow UID and GID are defined, for
79  * architectures that now have 32-bit UID/GID but didn't in the past
80  */
81
82 int overflowuid = DEFAULT_OVERFLOWUID;
83 int overflowgid = DEFAULT_OVERFLOWGID;
84
85 #ifdef CONFIG_UID16
86 EXPORT_SYMBOL(overflowuid);
87 EXPORT_SYMBOL(overflowgid);
88 #endif
89
90 /*
91  * the same as above, but for filesystems which can only store a 16-bit
92  * UID and GID. as such, this is needed on all architectures
93  */
94
95 int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
96 int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
97
98 EXPORT_SYMBOL(fs_overflowuid);
99 EXPORT_SYMBOL(fs_overflowgid);
100
101 /*
102  * this indicates whether you can reboot with ctrl-alt-del: the default is yes
103  */
104
105 int C_A_D = 1;
106 struct pid *cad_pid;
107 EXPORT_SYMBOL(cad_pid);
108
109 /*
110  * If set, this is used for preparing the system to power off.
111  */
112
113 void (*pm_power_off_prepare)(void);
114
115 static int set_one_prio(struct task_struct *p, int niceval, int error)
116 {
117         int no_nice;
118
119         if (p->uid != current->euid &&
120                 p->euid != current->euid && !capable(CAP_SYS_NICE)) {
121                 error = -EPERM;
122                 goto out;
123         }
124         if (niceval < task_nice(p) && !can_nice(p, niceval)) {
125                 error = -EACCES;
126                 goto out;
127         }
128         no_nice = security_task_setnice(p, niceval);
129         if (no_nice) {
130                 error = no_nice;
131                 goto out;
132         }
133         if (error == -ESRCH)
134                 error = 0;
135         set_user_nice(p, niceval);
136 out:
137         return error;
138 }
139
140 asmlinkage long sys_setpriority(int which, int who, int niceval)
141 {
142         struct task_struct *g, *p;
143         struct user_struct *user;
144         int error = -EINVAL;
145         struct pid *pgrp;
146
147         if (which > PRIO_USER || which < PRIO_PROCESS)
148                 goto out;
149
150         /* normalize: avoid signed division (rounding problems) */
151         error = -ESRCH;
152         if (niceval < -20)
153                 niceval = -20;
154         if (niceval > 19)
155                 niceval = 19;
156
157         read_lock(&tasklist_lock);
158         switch (which) {
159                 case PRIO_PROCESS:
160                         if (who)
161                                 p = find_task_by_vpid(who);
162                         else
163                                 p = current;
164                         if (p)
165                                 error = set_one_prio(p, niceval, error);
166                         break;
167                 case PRIO_PGRP:
168                         if (who)
169                                 pgrp = find_vpid(who);
170                         else
171                                 pgrp = task_pgrp(current);
172                         do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
173                                 error = set_one_prio(p, niceval, error);
174                         } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
175                         break;
176                 case PRIO_USER:
177                         user = current->user;
178                         if (!who)
179                                 who = current->uid;
180                         else
181                                 if ((who != current->uid) && !(user = find_user(who)))
182                                         goto out_unlock;        /* No processes for this user */
183
184                         do_each_thread(g, p)
185                                 if (p->uid == who)
186                                         error = set_one_prio(p, niceval, error);
187                         while_each_thread(g, p);
188                         if (who != current->uid)
189                                 free_uid(user);         /* For find_user() */
190                         break;
191         }
192 out_unlock:
193         read_unlock(&tasklist_lock);
194 out:
195         return error;
196 }
197
198 /*
199  * Ugh. To avoid negative return values, "getpriority()" will
200  * not return the normal nice-value, but a negated value that
201  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
202  * to stay compatible.
203  */
204 asmlinkage long sys_getpriority(int which, int who)
205 {
206         struct task_struct *g, *p;
207         struct user_struct *user;
208         long niceval, retval = -ESRCH;
209         struct pid *pgrp;
210
211         if (which > PRIO_USER || which < PRIO_PROCESS)
212                 return -EINVAL;
213
214         read_lock(&tasklist_lock);
215         switch (which) {
216                 case PRIO_PROCESS:
217                         if (who)
218                                 p = find_task_by_vpid(who);
219                         else
220                                 p = current;
221                         if (p) {
222                                 niceval = 20 - task_nice(p);
223                                 if (niceval > retval)
224                                         retval = niceval;
225                         }
226                         break;
227                 case PRIO_PGRP:
228                         if (who)
229                                 pgrp = find_vpid(who);
230                         else
231                                 pgrp = task_pgrp(current);
232                         do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
233                                 niceval = 20 - task_nice(p);
234                                 if (niceval > retval)
235                                         retval = niceval;
236                         } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
237                         break;
238                 case PRIO_USER:
239                         user = current->user;
240                         if (!who)
241                                 who = current->uid;
242                         else
243                                 if ((who != current->uid) && !(user = find_user(who)))
244                                         goto out_unlock;        /* No processes for this user */
245
246                         do_each_thread(g, p)
247                                 if (p->uid == who) {
248                                         niceval = 20 - task_nice(p);
249                                         if (niceval > retval)
250                                                 retval = niceval;
251                                 }
252                         while_each_thread(g, p);
253                         if (who != current->uid)
254                                 free_uid(user);         /* for find_user() */
255                         break;
256         }
257 out_unlock:
258         read_unlock(&tasklist_lock);
259
260         return retval;
261 }
262
263 /**
264  *      emergency_restart - reboot the system
265  *
266  *      Without shutting down any hardware or taking any locks
267  *      reboot the system.  This is called when we know we are in
268  *      trouble so this is our best effort to reboot.  This is
269  *      safe to call in interrupt context.
270  */
271 void emergency_restart(void)
272 {
273         machine_emergency_restart();
274 }
275 EXPORT_SYMBOL_GPL(emergency_restart);
276
277 void kernel_restart_prepare(char *cmd)
278 {
279         blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
280         system_state = SYSTEM_RESTART;
281         device_shutdown();
282         sysdev_shutdown();
283 }
284
285 /**
286  *      kernel_restart - reboot the system
287  *      @cmd: pointer to buffer containing command to execute for restart
288  *              or %NULL
289  *
290  *      Shutdown everything and perform a clean reboot.
291  *      This is not safe to call in interrupt context.
292  */
293 void kernel_restart(char *cmd)
294 {
295         kernel_restart_prepare(cmd);
296         if (!cmd)
297                 printk(KERN_EMERG "Restarting system.\n");
298         else
299                 printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
300         machine_restart(cmd);
301 }
302 EXPORT_SYMBOL_GPL(kernel_restart);
303
304 static void kernel_shutdown_prepare(enum system_states state)
305 {
306         blocking_notifier_call_chain(&reboot_notifier_list,
307                 (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
308         system_state = state;
309         device_shutdown();
310 }
311 /**
312  *      kernel_halt - halt the system
313  *
314  *      Shutdown everything and perform a clean system halt.
315  */
316 void kernel_halt(void)
317 {
318         kernel_shutdown_prepare(SYSTEM_HALT);
319         sysdev_shutdown();
320         printk(KERN_EMERG "System halted.\n");
321         machine_halt();
322 }
323
324 EXPORT_SYMBOL_GPL(kernel_halt);
325
326 /**
327  *      kernel_power_off - power_off the system
328  *
329  *      Shutdown everything and perform a clean system power_off.
330  */
331 void kernel_power_off(void)
332 {
333         kernel_shutdown_prepare(SYSTEM_POWER_OFF);
334         if (pm_power_off_prepare)
335                 pm_power_off_prepare();
336         disable_nonboot_cpus();
337         sysdev_shutdown();
338         printk(KERN_EMERG "Power down.\n");
339         machine_power_off();
340 }
341 EXPORT_SYMBOL_GPL(kernel_power_off);
342 /*
343  * Reboot system call: for obvious reasons only root may call it,
344  * and even root needs to set up some magic numbers in the registers
345  * so that some mistake won't make this reboot the whole machine.
346  * You can also set the meaning of the ctrl-alt-del-key here.
347  *
348  * reboot doesn't sync: do that yourself before calling this.
349  */
350 asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
351 {
352         char buffer[256];
353
354         /* We only trust the superuser with rebooting the system. */
355         if (!capable(CAP_SYS_BOOT))
356                 return -EPERM;
357
358         /* For safety, we require "magic" arguments. */
359         if (magic1 != LINUX_REBOOT_MAGIC1 ||
360             (magic2 != LINUX_REBOOT_MAGIC2 &&
361                         magic2 != LINUX_REBOOT_MAGIC2A &&
362                         magic2 != LINUX_REBOOT_MAGIC2B &&
363                         magic2 != LINUX_REBOOT_MAGIC2C))
364                 return -EINVAL;
365
366         /* Instead of trying to make the power_off code look like
367          * halt when pm_power_off is not set do it the easy way.
368          */
369         if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
370                 cmd = LINUX_REBOOT_CMD_HALT;
371
372         lock_kernel();
373         switch (cmd) {
374         case LINUX_REBOOT_CMD_RESTART:
375                 kernel_restart(NULL);
376                 break;
377
378         case LINUX_REBOOT_CMD_CAD_ON:
379                 C_A_D = 1;
380                 break;
381
382         case LINUX_REBOOT_CMD_CAD_OFF:
383                 C_A_D = 0;
384                 break;
385
386         case LINUX_REBOOT_CMD_HALT:
387                 kernel_halt();
388                 unlock_kernel();
389                 do_exit(0);
390                 break;
391
392         case LINUX_REBOOT_CMD_POWER_OFF:
393                 kernel_power_off();
394                 unlock_kernel();
395                 do_exit(0);
396                 break;
397
398         case LINUX_REBOOT_CMD_RESTART2:
399                 if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
400                         unlock_kernel();
401                         return -EFAULT;
402                 }
403                 buffer[sizeof(buffer) - 1] = '\0';
404
405                 kernel_restart(buffer);
406                 break;
407
408 #ifdef CONFIG_KEXEC
409         case LINUX_REBOOT_CMD_KEXEC:
410                 {
411                         int ret;
412                         ret = kernel_kexec();
413                         unlock_kernel();
414                         return ret;
415                 }
416 #endif
417
418 #ifdef CONFIG_HIBERNATION
419         case LINUX_REBOOT_CMD_SW_SUSPEND:
420                 {
421                         int ret = hibernate();
422                         unlock_kernel();
423                         return ret;
424                 }
425 #endif
426
427         default:
428                 unlock_kernel();
429                 return -EINVAL;
430         }
431         unlock_kernel();
432         return 0;
433 }
434
435 static void deferred_cad(struct work_struct *dummy)
436 {
437         kernel_restart(NULL);
438 }
439
440 /*
441  * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
442  * As it's called within an interrupt, it may NOT sync: the only choice
443  * is whether to reboot at once, or just ignore the ctrl-alt-del.
444  */
445 void ctrl_alt_del(void)
446 {
447         static DECLARE_WORK(cad_work, deferred_cad);
448
449         if (C_A_D)
450                 schedule_work(&cad_work);
451         else
452                 kill_cad_pid(SIGINT, 1);
453 }
454         
455 /*
456  * Unprivileged users may change the real gid to the effective gid
457  * or vice versa.  (BSD-style)
458  *
459  * If you set the real gid at all, or set the effective gid to a value not
460  * equal to the real gid, then the saved gid is set to the new effective gid.
461  *
462  * This makes it possible for a setgid program to completely drop its
463  * privileges, which is often a useful assertion to make when you are doing
464  * a security audit over a program.
465  *
466  * The general idea is that a program which uses just setregid() will be
467  * 100% compatible with BSD.  A program which uses just setgid() will be
468  * 100% compatible with POSIX with saved IDs. 
469  *
470  * SMP: There are not races, the GIDs are checked only by filesystem
471  *      operations (as far as semantic preservation is concerned).
472  */
473 asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
474 {
475         int old_rgid = current->gid;
476         int old_egid = current->egid;
477         int new_rgid = old_rgid;
478         int new_egid = old_egid;
479         int retval;
480
481         retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE);
482         if (retval)
483                 return retval;
484
485         if (rgid != (gid_t) -1) {
486                 if ((old_rgid == rgid) ||
487                     (current->egid==rgid) ||
488                     capable(CAP_SETGID))
489                         new_rgid = rgid;
490                 else
491                         return -EPERM;
492         }
493         if (egid != (gid_t) -1) {
494                 if ((old_rgid == egid) ||
495                     (current->egid == egid) ||
496                     (current->sgid == egid) ||
497                     capable(CAP_SETGID))
498                         new_egid = egid;
499                 else
500                         return -EPERM;
501         }
502         if (new_egid != old_egid) {
503                 set_dumpable(current->mm, suid_dumpable);
504                 smp_wmb();
505         }
506         if (rgid != (gid_t) -1 ||
507             (egid != (gid_t) -1 && egid != old_rgid))
508                 current->sgid = new_egid;
509         current->fsgid = new_egid;
510         current->egid = new_egid;
511         current->gid = new_rgid;
512         key_fsgid_changed(current);
513         proc_id_connector(current, PROC_EVENT_GID);
514         return 0;
515 }
516
517 /*
518  * setgid() is implemented like SysV w/ SAVED_IDS 
519  *
520  * SMP: Same implicit races as above.
521  */
522 asmlinkage long sys_setgid(gid_t gid)
523 {
524         int old_egid = current->egid;
525         int retval;
526
527         retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID);
528         if (retval)
529                 return retval;
530
531         if (capable(CAP_SETGID)) {
532                 if (old_egid != gid) {
533                         set_dumpable(current->mm, suid_dumpable);
534                         smp_wmb();
535                 }
536                 current->gid = current->egid = current->sgid = current->fsgid = gid;
537         } else if ((gid == current->gid) || (gid == current->sgid)) {
538                 if (old_egid != gid) {
539                         set_dumpable(current->mm, suid_dumpable);
540                         smp_wmb();
541                 }
542                 current->egid = current->fsgid = gid;
543         }
544         else
545                 return -EPERM;
546
547         key_fsgid_changed(current);
548         proc_id_connector(current, PROC_EVENT_GID);
549         return 0;
550 }
551   
552 static int set_user(uid_t new_ruid, int dumpclear)
553 {
554         struct user_struct *new_user;
555
556         new_user = alloc_uid(current->nsproxy->user_ns, new_ruid);
557         if (!new_user)
558                 return -EAGAIN;
559
560         if (atomic_read(&new_user->processes) >=
561                                 current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
562                         new_user != current->nsproxy->user_ns->root_user) {
563                 free_uid(new_user);
564                 return -EAGAIN;
565         }
566
567         switch_uid(new_user);
568
569         if (dumpclear) {
570                 set_dumpable(current->mm, suid_dumpable);
571                 smp_wmb();
572         }
573         current->uid = new_ruid;
574         return 0;
575 }
576
577 /*
578  * Unprivileged users may change the real uid to the effective uid
579  * or vice versa.  (BSD-style)
580  *
581  * If you set the real uid at all, or set the effective uid to a value not
582  * equal to the real uid, then the saved uid is set to the new effective uid.
583  *
584  * This makes it possible for a setuid program to completely drop its
585  * privileges, which is often a useful assertion to make when you are doing
586  * a security audit over a program.
587  *
588  * The general idea is that a program which uses just setreuid() will be
589  * 100% compatible with BSD.  A program which uses just setuid() will be
590  * 100% compatible with POSIX with saved IDs. 
591  */
592 asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
593 {
594         int old_ruid, old_euid, old_suid, new_ruid, new_euid;
595         int retval;
596
597         retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE);
598         if (retval)
599                 return retval;
600
601         new_ruid = old_ruid = current->uid;
602         new_euid = old_euid = current->euid;
603         old_suid = current->suid;
604
605         if (ruid != (uid_t) -1) {
606                 new_ruid = ruid;
607                 if ((old_ruid != ruid) &&
608                     (current->euid != ruid) &&
609                     !capable(CAP_SETUID))
610                         return -EPERM;
611         }
612
613         if (euid != (uid_t) -1) {
614                 new_euid = euid;
615                 if ((old_ruid != euid) &&
616                     (current->euid != euid) &&
617                     (current->suid != euid) &&
618                     !capable(CAP_SETUID))
619                         return -EPERM;
620         }
621
622         if (new_ruid != old_ruid && set_user(new_ruid, new_euid != old_euid) < 0)
623                 return -EAGAIN;
624
625         if (new_euid != old_euid) {
626                 set_dumpable(current->mm, suid_dumpable);
627                 smp_wmb();
628         }
629         current->fsuid = current->euid = new_euid;
630         if (ruid != (uid_t) -1 ||
631             (euid != (uid_t) -1 && euid != old_ruid))
632                 current->suid = current->euid;
633         current->fsuid = current->euid;
634
635         key_fsuid_changed(current);
636         proc_id_connector(current, PROC_EVENT_UID);
637
638         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RE);
639 }
640
641
642                 
643 /*
644  * setuid() is implemented like SysV with SAVED_IDS 
645  * 
646  * Note that SAVED_ID's is deficient in that a setuid root program
647  * like sendmail, for example, cannot set its uid to be a normal 
648  * user and then switch back, because if you're root, setuid() sets
649  * the saved uid too.  If you don't like this, blame the bright people
650  * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
651  * will allow a root program to temporarily drop privileges and be able to
652  * regain them by swapping the real and effective uid.  
653  */
654 asmlinkage long sys_setuid(uid_t uid)
655 {
656         int old_euid = current->euid;
657         int old_ruid, old_suid, new_suid;
658         int retval;
659
660         retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID);
661         if (retval)
662                 return retval;
663
664         old_ruid = current->uid;
665         old_suid = current->suid;
666         new_suid = old_suid;
667         
668         if (capable(CAP_SETUID)) {
669                 if (uid != old_ruid && set_user(uid, old_euid != uid) < 0)
670                         return -EAGAIN;
671                 new_suid = uid;
672         } else if ((uid != current->uid) && (uid != new_suid))
673                 return -EPERM;
674
675         if (old_euid != uid) {
676                 set_dumpable(current->mm, suid_dumpable);
677                 smp_wmb();
678         }
679         current->fsuid = current->euid = uid;
680         current->suid = new_suid;
681
682         key_fsuid_changed(current);
683         proc_id_connector(current, PROC_EVENT_UID);
684
685         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_ID);
686 }
687
688
689 /*
690  * This function implements a generic ability to update ruid, euid,
691  * and suid.  This allows you to implement the 4.4 compatible seteuid().
692  */
693 asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
694 {
695         int old_ruid = current->uid;
696         int old_euid = current->euid;
697         int old_suid = current->suid;
698         int retval;
699
700         retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES);
701         if (retval)
702                 return retval;
703
704         if (!capable(CAP_SETUID)) {
705                 if ((ruid != (uid_t) -1) && (ruid != current->uid) &&
706                     (ruid != current->euid) && (ruid != current->suid))
707                         return -EPERM;
708                 if ((euid != (uid_t) -1) && (euid != current->uid) &&
709                     (euid != current->euid) && (euid != current->suid))
710                         return -EPERM;
711                 if ((suid != (uid_t) -1) && (suid != current->uid) &&
712                     (suid != current->euid) && (suid != current->suid))
713                         return -EPERM;
714         }
715         if (ruid != (uid_t) -1) {
716                 if (ruid != current->uid && set_user(ruid, euid != current->euid) < 0)
717                         return -EAGAIN;
718         }
719         if (euid != (uid_t) -1) {
720                 if (euid != current->euid) {
721                         set_dumpable(current->mm, suid_dumpable);
722                         smp_wmb();
723                 }
724                 current->euid = euid;
725         }
726         current->fsuid = current->euid;
727         if (suid != (uid_t) -1)
728                 current->suid = suid;
729
730         key_fsuid_changed(current);
731         proc_id_connector(current, PROC_EVENT_UID);
732
733         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RES);
734 }
735
736 asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
737 {
738         int retval;
739
740         if (!(retval = put_user(current->uid, ruid)) &&
741             !(retval = put_user(current->euid, euid)))
742                 retval = put_user(current->suid, suid);
743
744         return retval;
745 }
746
747 /*
748  * Same as above, but for rgid, egid, sgid.
749  */
750 asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
751 {
752         int retval;
753
754         retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES);
755         if (retval)
756                 return retval;
757
758         if (!capable(CAP_SETGID)) {
759                 if ((rgid != (gid_t) -1) && (rgid != current->gid) &&
760                     (rgid != current->egid) && (rgid != current->sgid))
761                         return -EPERM;
762                 if ((egid != (gid_t) -1) && (egid != current->gid) &&
763                     (egid != current->egid) && (egid != current->sgid))
764                         return -EPERM;
765                 if ((sgid != (gid_t) -1) && (sgid != current->gid) &&
766                     (sgid != current->egid) && (sgid != current->sgid))
767                         return -EPERM;
768         }
769         if (egid != (gid_t) -1) {
770                 if (egid != current->egid) {
771                         set_dumpable(current->mm, suid_dumpable);
772                         smp_wmb();
773                 }
774                 current->egid = egid;
775         }
776         current->fsgid = current->egid;
777         if (rgid != (gid_t) -1)
778                 current->gid = rgid;
779         if (sgid != (gid_t) -1)
780                 current->sgid = sgid;
781
782         key_fsgid_changed(current);
783         proc_id_connector(current, PROC_EVENT_GID);
784         return 0;
785 }
786
787 asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
788 {
789         int retval;
790
791         if (!(retval = put_user(current->gid, rgid)) &&
792             !(retval = put_user(current->egid, egid)))
793                 retval = put_user(current->sgid, sgid);
794
795         return retval;
796 }
797
798
799 /*
800  * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
801  * is used for "access()" and for the NFS daemon (letting nfsd stay at
802  * whatever uid it wants to). It normally shadows "euid", except when
803  * explicitly set by setfsuid() or for access..
804  */
805 asmlinkage long sys_setfsuid(uid_t uid)
806 {
807         int old_fsuid;
808
809         old_fsuid = current->fsuid;
810         if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
811                 return old_fsuid;
812
813         if (uid == current->uid || uid == current->euid ||
814             uid == current->suid || uid == current->fsuid || 
815             capable(CAP_SETUID)) {
816                 if (uid != old_fsuid) {
817                         set_dumpable(current->mm, suid_dumpable);
818                         smp_wmb();
819                 }
820                 current->fsuid = uid;
821         }
822
823         key_fsuid_changed(current);
824         proc_id_connector(current, PROC_EVENT_UID);
825
826         security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
827
828         return old_fsuid;
829 }
830
831 /*
832  * Samma på svenska..
833  */
834 asmlinkage long sys_setfsgid(gid_t gid)
835 {
836         int old_fsgid;
837
838         old_fsgid = current->fsgid;
839         if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
840                 return old_fsgid;
841
842         if (gid == current->gid || gid == current->egid ||
843             gid == current->sgid || gid == current->fsgid || 
844             capable(CAP_SETGID)) {
845                 if (gid != old_fsgid) {
846                         set_dumpable(current->mm, suid_dumpable);
847                         smp_wmb();
848                 }
849                 current->fsgid = gid;
850                 key_fsgid_changed(current);
851                 proc_id_connector(current, PROC_EVENT_GID);
852         }
853         return old_fsgid;
854 }
855
856 asmlinkage long sys_times(struct tms __user * tbuf)
857 {
858         /*
859          *      In the SMP world we might just be unlucky and have one of
860          *      the times increment as we use it. Since the value is an
861          *      atomically safe type this is just fine. Conceptually its
862          *      as if the syscall took an instant longer to occur.
863          */
864         if (tbuf) {
865                 struct tms tmp;
866                 struct task_struct *tsk = current;
867                 struct task_struct *t;
868                 cputime_t utime, stime, cutime, cstime;
869
870                 spin_lock_irq(&tsk->sighand->siglock);
871                 utime = tsk->signal->utime;
872                 stime = tsk->signal->stime;
873                 t = tsk;
874                 do {
875                         utime = cputime_add(utime, t->utime);
876                         stime = cputime_add(stime, t->stime);
877                         t = next_thread(t);
878                 } while (t != tsk);
879
880                 cutime = tsk->signal->cutime;
881                 cstime = tsk->signal->cstime;
882                 spin_unlock_irq(&tsk->sighand->siglock);
883
884                 tmp.tms_utime = cputime_to_clock_t(utime);
885                 tmp.tms_stime = cputime_to_clock_t(stime);
886                 tmp.tms_cutime = cputime_to_clock_t(cutime);
887                 tmp.tms_cstime = cputime_to_clock_t(cstime);
888                 if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
889                         return -EFAULT;
890         }
891         return (long) jiffies_64_to_clock_t(get_jiffies_64());
892 }
893
894 /*
895  * This needs some heavy checking ...
896  * I just haven't the stomach for it. I also don't fully
897  * understand sessions/pgrp etc. Let somebody who does explain it.
898  *
899  * OK, I think I have the protection semantics right.... this is really
900  * only important on a multi-user system anyway, to make sure one user
901  * can't send a signal to a process owned by another.  -TYT, 12/12/91
902  *
903  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
904  * LBT 04.03.94
905  */
906 asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
907 {
908         struct task_struct *p;
909         struct task_struct *group_leader = current->group_leader;
910         struct pid *pgrp;
911         int err;
912
913         if (!pid)
914                 pid = task_pid_vnr(group_leader);
915         if (!pgid)
916                 pgid = pid;
917         if (pgid < 0)
918                 return -EINVAL;
919
920         /* From this point forward we keep holding onto the tasklist lock
921          * so that our parent does not change from under us. -DaveM
922          */
923         write_lock_irq(&tasklist_lock);
924
925         err = -ESRCH;
926         p = find_task_by_vpid(pid);
927         if (!p)
928                 goto out;
929
930         err = -EINVAL;
931         if (!thread_group_leader(p))
932                 goto out;
933
934         if (same_thread_group(p->real_parent, group_leader)) {
935                 err = -EPERM;
936                 if (task_session(p) != task_session(group_leader))
937                         goto out;
938                 err = -EACCES;
939                 if (p->did_exec)
940                         goto out;
941         } else {
942                 err = -ESRCH;
943                 if (p != group_leader)
944                         goto out;
945         }
946
947         err = -EPERM;
948         if (p->signal->leader)
949                 goto out;
950
951         pgrp = task_pid(p);
952         if (pgid != pid) {
953                 struct task_struct *g;
954
955                 pgrp = find_vpid(pgid);
956                 g = pid_task(pgrp, PIDTYPE_PGID);
957                 if (!g || task_session(g) != task_session(group_leader))
958                         goto out;
959         }
960
961         err = security_task_setpgid(p, pgid);
962         if (err)
963                 goto out;
964
965         if (task_pgrp(p) != pgrp) {
966                 change_pid(p, PIDTYPE_PGID, pgrp);
967                 set_task_pgrp(p, pid_nr(pgrp));
968         }
969
970         err = 0;
971 out:
972         /* All paths lead to here, thus we are safe. -DaveM */
973         write_unlock_irq(&tasklist_lock);
974         return err;
975 }
976
977 asmlinkage long sys_getpgid(pid_t pid)
978 {
979         struct task_struct *p;
980         struct pid *grp;
981         int retval;
982
983         rcu_read_lock();
984         if (!pid)
985                 grp = task_pgrp(current);
986         else {
987                 retval = -ESRCH;
988                 p = find_task_by_vpid(pid);
989                 if (!p)
990                         goto out;
991                 grp = task_pgrp(p);
992                 if (!grp)
993                         goto out;
994
995                 retval = security_task_getpgid(p);
996                 if (retval)
997                         goto out;
998         }
999         retval = pid_vnr(grp);
1000 out:
1001         rcu_read_unlock();
1002         return retval;
1003 }
1004
1005 #ifdef __ARCH_WANT_SYS_GETPGRP
1006
1007 asmlinkage long sys_getpgrp(void)
1008 {
1009         return sys_getpgid(0);
1010 }
1011
1012 #endif
1013
1014 asmlinkage long sys_getsid(pid_t pid)
1015 {
1016         struct task_struct *p;
1017         struct pid *sid;
1018         int retval;
1019
1020         rcu_read_lock();
1021         if (!pid)
1022                 sid = task_session(current);
1023         else {
1024                 retval = -ESRCH;
1025                 p = find_task_by_vpid(pid);
1026                 if (!p)
1027                         goto out;
1028                 sid = task_session(p);
1029                 if (!sid)
1030                         goto out;
1031
1032                 retval = security_task_getsid(p);
1033                 if (retval)
1034                         goto out;
1035         }
1036         retval = pid_vnr(sid);
1037 out:
1038         rcu_read_unlock();
1039         return retval;
1040 }
1041
1042 asmlinkage long sys_setsid(void)
1043 {
1044         struct task_struct *group_leader = current->group_leader;
1045         struct pid *sid = task_pid(group_leader);
1046         pid_t session = pid_vnr(sid);
1047         int err = -EPERM;
1048
1049         write_lock_irq(&tasklist_lock);
1050         /* Fail if I am already a session leader */
1051         if (group_leader->signal->leader)
1052                 goto out;
1053
1054         /* Fail if a process group id already exists that equals the
1055          * proposed session id.
1056          */
1057         if (pid_task(sid, PIDTYPE_PGID))
1058                 goto out;
1059
1060         group_leader->signal->leader = 1;
1061         __set_special_pids(sid);
1062
1063         spin_lock(&group_leader->sighand->siglock);
1064         group_leader->signal->tty = NULL;
1065         spin_unlock(&group_leader->sighand->siglock);
1066
1067         err = session;
1068 out:
1069         write_unlock_irq(&tasklist_lock);
1070         return err;
1071 }
1072
1073 /*
1074  * Supplementary group IDs
1075  */
1076
1077 /* init to 2 - one for init_task, one to ensure it is never freed */
1078 struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
1079
1080 struct group_info *groups_alloc(int gidsetsize)
1081 {
1082         struct group_info *group_info;
1083         int nblocks;
1084         int i;
1085
1086         nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
1087         /* Make sure we always allocate at least one indirect block pointer */
1088         nblocks = nblocks ? : 1;
1089         group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
1090         if (!group_info)
1091                 return NULL;
1092         group_info->ngroups = gidsetsize;
1093         group_info->nblocks = nblocks;
1094         atomic_set(&group_info->usage, 1);
1095
1096         if (gidsetsize <= NGROUPS_SMALL)
1097                 group_info->blocks[0] = group_info->small_block;
1098         else {
1099                 for (i = 0; i < nblocks; i++) {
1100                         gid_t *b;
1101                         b = (void *)__get_free_page(GFP_USER);
1102                         if (!b)
1103                                 goto out_undo_partial_alloc;
1104                         group_info->blocks[i] = b;
1105                 }
1106         }
1107         return group_info;
1108
1109 out_undo_partial_alloc:
1110         while (--i >= 0) {
1111                 free_page((unsigned long)group_info->blocks[i]);
1112         }
1113         kfree(group_info);
1114         return NULL;
1115 }
1116
1117 EXPORT_SYMBOL(groups_alloc);
1118
1119 void groups_free(struct group_info *group_info)
1120 {
1121         if (group_info->blocks[0] != group_info->small_block) {
1122                 int i;
1123                 for (i = 0; i < group_info->nblocks; i++)
1124                         free_page((unsigned long)group_info->blocks[i]);
1125         }
1126         kfree(group_info);
1127 }
1128
1129 EXPORT_SYMBOL(groups_free);
1130
1131 /* export the group_info to a user-space array */
1132 static int groups_to_user(gid_t __user *grouplist,
1133     struct group_info *group_info)
1134 {
1135         int i;
1136         unsigned int count = group_info->ngroups;
1137
1138         for (i = 0; i < group_info->nblocks; i++) {
1139                 unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
1140                 unsigned int len = cp_count * sizeof(*grouplist);
1141
1142                 if (copy_to_user(grouplist, group_info->blocks[i], len))
1143                         return -EFAULT;
1144
1145                 grouplist += NGROUPS_PER_BLOCK;
1146                 count -= cp_count;
1147         }
1148         return 0;
1149 }
1150
1151 /* fill a group_info from a user-space array - it must be allocated already */
1152 static int groups_from_user(struct group_info *group_info,
1153     gid_t __user *grouplist)
1154 {
1155         int i;
1156         unsigned int count = group_info->ngroups;
1157
1158         for (i = 0; i < group_info->nblocks; i++) {
1159                 unsigned int cp_count = min(NGROUPS_PER_BLOCK, count);
1160                 unsigned int len = cp_count * sizeof(*grouplist);
1161
1162                 if (copy_from_user(group_info->blocks[i], grouplist, len))
1163                         return -EFAULT;
1164
1165                 grouplist += NGROUPS_PER_BLOCK;
1166                 count -= cp_count;
1167         }
1168         return 0;
1169 }
1170
1171 /* a simple Shell sort */
1172 static void groups_sort(struct group_info *group_info)
1173 {
1174         int base, max, stride;
1175         int gidsetsize = group_info->ngroups;
1176
1177         for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
1178                 ; /* nothing */
1179         stride /= 3;
1180
1181         while (stride) {
1182                 max = gidsetsize - stride;
1183                 for (base = 0; base < max; base++) {
1184                         int left = base;
1185                         int right = left + stride;
1186                         gid_t tmp = GROUP_AT(group_info, right);
1187
1188                         while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
1189                                 GROUP_AT(group_info, right) =
1190                                     GROUP_AT(group_info, left);
1191                                 right = left;
1192                                 left -= stride;
1193                         }
1194                         GROUP_AT(group_info, right) = tmp;
1195                 }
1196                 stride /= 3;
1197         }
1198 }
1199
1200 /* a simple bsearch */
1201 int groups_search(struct group_info *group_info, gid_t grp)
1202 {
1203         unsigned int left, right;
1204
1205         if (!group_info)
1206                 return 0;
1207
1208         left = 0;
1209         right = group_info->ngroups;
1210         while (left < right) {
1211                 unsigned int mid = (left+right)/2;
1212                 int cmp = grp - GROUP_AT(group_info, mid);
1213                 if (cmp > 0)
1214                         left = mid + 1;
1215                 else if (cmp < 0)
1216                         right = mid;
1217                 else
1218                         return 1;
1219         }
1220         return 0;
1221 }
1222
1223 /* validate and set current->group_info */
1224 int set_current_groups(struct group_info *group_info)
1225 {
1226         int retval;
1227         struct group_info *old_info;
1228
1229         retval = security_task_setgroups(group_info);
1230         if (retval)
1231                 return retval;
1232
1233         groups_sort(group_info);
1234         get_group_info(group_info);
1235
1236         task_lock(current);
1237         old_info = current->group_info;
1238         current->group_info = group_info;
1239         task_unlock(current);
1240
1241         put_group_info(old_info);
1242
1243         return 0;
1244 }
1245
1246 EXPORT_SYMBOL(set_current_groups);
1247
1248 asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
1249 {
1250         int i = 0;
1251
1252         /*
1253          *      SMP: Nobody else can change our grouplist. Thus we are
1254          *      safe.
1255          */
1256
1257         if (gidsetsize < 0)
1258                 return -EINVAL;
1259
1260         /* no need to grab task_lock here; it cannot change */
1261         i = current->group_info->ngroups;
1262         if (gidsetsize) {
1263                 if (i > gidsetsize) {
1264                         i = -EINVAL;
1265                         goto out;
1266                 }
1267                 if (groups_to_user(grouplist, current->group_info)) {
1268                         i = -EFAULT;
1269                         goto out;
1270                 }
1271         }
1272 out:
1273         return i;
1274 }
1275
1276 /*
1277  *      SMP: Our groups are copy-on-write. We can set them safely
1278  *      without another task interfering.
1279  */
1280  
1281 asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
1282 {
1283         struct group_info *group_info;
1284         int retval;
1285
1286         if (!capable(CAP_SETGID))
1287                 return -EPERM;
1288         if ((unsigned)gidsetsize > NGROUPS_MAX)
1289                 return -EINVAL;
1290
1291         group_info = groups_alloc(gidsetsize);
1292         if (!group_info)
1293                 return -ENOMEM;
1294         retval = groups_from_user(group_info, grouplist);
1295         if (retval) {
1296                 put_group_info(group_info);
1297                 return retval;
1298         }
1299
1300         retval = set_current_groups(group_info);
1301         put_group_info(group_info);
1302
1303         return retval;
1304 }
1305
1306 /*
1307  * Check whether we're fsgid/egid or in the supplemental group..
1308  */
1309 int in_group_p(gid_t grp)
1310 {
1311         int retval = 1;
1312         if (grp != current->fsgid)
1313                 retval = groups_search(current->group_info, grp);
1314         return retval;
1315 }
1316
1317 EXPORT_SYMBOL(in_group_p);
1318
1319 int in_egroup_p(gid_t grp)
1320 {
1321         int retval = 1;
1322         if (grp != current->egid)
1323                 retval = groups_search(current->group_info, grp);
1324         return retval;
1325 }
1326
1327 EXPORT_SYMBOL(in_egroup_p);
1328
1329 DECLARE_RWSEM(uts_sem);
1330
1331 asmlinkage long sys_newuname(struct new_utsname __user * name)
1332 {
1333         int errno = 0;
1334
1335         down_read(&uts_sem);
1336         if (copy_to_user(name, utsname(), sizeof *name))
1337                 errno = -EFAULT;
1338         up_read(&uts_sem);
1339         return errno;
1340 }
1341
1342 asmlinkage long sys_sethostname(char __user *name, int len)
1343 {
1344         int errno;
1345         char tmp[__NEW_UTS_LEN];
1346
1347         if (!capable(CAP_SYS_ADMIN))
1348                 return -EPERM;
1349         if (len < 0 || len > __NEW_UTS_LEN)
1350                 return -EINVAL;
1351         down_write(&uts_sem);
1352         errno = -EFAULT;
1353         if (!copy_from_user(tmp, name, len)) {
1354                 memcpy(utsname()->nodename, tmp, len);
1355                 utsname()->nodename[len] = 0;
1356                 errno = 0;
1357         }
1358         up_write(&uts_sem);
1359         return errno;
1360 }
1361
1362 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
1363
1364 asmlinkage long sys_gethostname(char __user *name, int len)
1365 {
1366         int i, errno;
1367
1368         if (len < 0)
1369                 return -EINVAL;
1370         down_read(&uts_sem);
1371         i = 1 + strlen(utsname()->nodename);
1372         if (i > len)
1373                 i = len;
1374         errno = 0;
1375         if (copy_to_user(name, utsname()->nodename, i))
1376                 errno = -EFAULT;
1377         up_read(&uts_sem);
1378         return errno;
1379 }
1380
1381 #endif
1382
1383 /*
1384  * Only setdomainname; getdomainname can be implemented by calling
1385  * uname()
1386  */
1387 asmlinkage long sys_setdomainname(char __user *name, int len)
1388 {
1389         int errno;
1390         char tmp[__NEW_UTS_LEN];
1391
1392         if (!capable(CAP_SYS_ADMIN))
1393                 return -EPERM;
1394         if (len < 0 || len > __NEW_UTS_LEN)
1395                 return -EINVAL;
1396
1397         down_write(&uts_sem);
1398         errno = -EFAULT;
1399         if (!copy_from_user(tmp, name, len)) {
1400                 memcpy(utsname()->domainname, tmp, len);
1401                 utsname()->domainname[len] = 0;
1402                 errno = 0;
1403         }
1404         up_write(&uts_sem);
1405         return errno;
1406 }
1407
1408 asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1409 {
1410         if (resource >= RLIM_NLIMITS)
1411                 return -EINVAL;
1412         else {
1413                 struct rlimit value;
1414                 task_lock(current->group_leader);
1415                 value = current->signal->rlim[resource];
1416                 task_unlock(current->group_leader);
1417                 return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
1418         }
1419 }
1420
1421 #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
1422
1423 /*
1424  *      Back compatibility for getrlimit. Needed for some apps.
1425  */
1426  
1427 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1428 {
1429         struct rlimit x;
1430         if (resource >= RLIM_NLIMITS)
1431                 return -EINVAL;
1432
1433         task_lock(current->group_leader);
1434         x = current->signal->rlim[resource];
1435         task_unlock(current->group_leader);
1436         if (x.rlim_cur > 0x7FFFFFFF)
1437                 x.rlim_cur = 0x7FFFFFFF;
1438         if (x.rlim_max > 0x7FFFFFFF)
1439                 x.rlim_max = 0x7FFFFFFF;
1440         return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
1441 }
1442
1443 #endif
1444
1445 asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
1446 {
1447         struct rlimit new_rlim, *old_rlim;
1448         unsigned long it_prof_secs;
1449         int retval;
1450
1451         if (resource >= RLIM_NLIMITS)
1452                 return -EINVAL;
1453         if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
1454                 return -EFAULT;
1455         if (new_rlim.rlim_cur > new_rlim.rlim_max)
1456                 return -EINVAL;
1457         old_rlim = current->signal->rlim + resource;
1458         if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
1459             !capable(CAP_SYS_RESOURCE))
1460                 return -EPERM;
1461         if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
1462                 return -EPERM;
1463
1464         retval = security_task_setrlimit(resource, &new_rlim);
1465         if (retval)
1466                 return retval;
1467
1468         if (resource == RLIMIT_CPU && new_rlim.rlim_cur == 0) {
1469                 /*
1470                  * The caller is asking for an immediate RLIMIT_CPU
1471                  * expiry.  But we use the zero value to mean "it was
1472                  * never set".  So let's cheat and make it one second
1473                  * instead
1474                  */
1475                 new_rlim.rlim_cur = 1;
1476         }
1477
1478         task_lock(current->group_leader);
1479         *old_rlim = new_rlim;
1480         task_unlock(current->group_leader);
1481
1482         if (resource != RLIMIT_CPU)
1483                 goto out;
1484
1485         /*
1486          * RLIMIT_CPU handling.   Note that the kernel fails to return an error
1487          * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
1488          * very long-standing error, and fixing it now risks breakage of
1489          * applications, so we live with it
1490          */
1491         if (new_rlim.rlim_cur == RLIM_INFINITY)
1492                 goto out;
1493
1494         it_prof_secs = cputime_to_secs(current->signal->it_prof_expires);
1495         if (it_prof_secs == 0 || new_rlim.rlim_cur <= it_prof_secs) {
1496                 unsigned long rlim_cur = new_rlim.rlim_cur;
1497                 cputime_t cputime;
1498
1499                 cputime = secs_to_cputime(rlim_cur);
1500                 read_lock(&tasklist_lock);
1501                 spin_lock_irq(&current->sighand->siglock);
1502                 set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
1503                 spin_unlock_irq(&current->sighand->siglock);
1504                 read_unlock(&tasklist_lock);
1505         }
1506 out:
1507         return 0;
1508 }
1509
1510 /*
1511  * It would make sense to put struct rusage in the task_struct,
1512  * except that would make the task_struct be *really big*.  After
1513  * task_struct gets moved into malloc'ed memory, it would
1514  * make sense to do this.  It will make moving the rest of the information
1515  * a lot simpler!  (Which we're not doing right now because we're not
1516  * measuring them yet).
1517  *
1518  * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
1519  * races with threads incrementing their own counters.  But since word
1520  * reads are atomic, we either get new values or old values and we don't
1521  * care which for the sums.  We always take the siglock to protect reading
1522  * the c* fields from p->signal from races with exit.c updating those
1523  * fields when reaping, so a sample either gets all the additions of a
1524  * given child after it's reaped, or none so this sample is before reaping.
1525  *
1526  * Locking:
1527  * We need to take the siglock for CHILDEREN, SELF and BOTH
1528  * for  the cases current multithreaded, non-current single threaded
1529  * non-current multithreaded.  Thread traversal is now safe with
1530  * the siglock held.
1531  * Strictly speaking, we donot need to take the siglock if we are current and
1532  * single threaded,  as no one else can take our signal_struct away, no one
1533  * else can  reap the  children to update signal->c* counters, and no one else
1534  * can race with the signal-> fields. If we do not take any lock, the
1535  * signal-> fields could be read out of order while another thread was just
1536  * exiting. So we should  place a read memory barrier when we avoid the lock.
1537  * On the writer side,  write memory barrier is implied in  __exit_signal
1538  * as __exit_signal releases  the siglock spinlock after updating the signal->
1539  * fields. But we don't do this yet to keep things simple.
1540  *
1541  */
1542
1543 static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r,
1544                                      cputime_t *utimep, cputime_t *stimep)
1545 {
1546         *utimep = cputime_add(*utimep, t->utime);
1547         *stimep = cputime_add(*stimep, t->stime);
1548         r->ru_nvcsw += t->nvcsw;
1549         r->ru_nivcsw += t->nivcsw;
1550         r->ru_minflt += t->min_flt;
1551         r->ru_majflt += t->maj_flt;
1552         r->ru_inblock += task_io_get_inblock(t);
1553         r->ru_oublock += task_io_get_oublock(t);
1554 }
1555
1556 static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
1557 {
1558         struct task_struct *t;
1559         unsigned long flags;
1560         cputime_t utime, stime;
1561
1562         memset((char *) r, 0, sizeof *r);
1563         utime = stime = cputime_zero;
1564
1565         if (who == RUSAGE_THREAD) {
1566                 accumulate_thread_rusage(p, r, &utime, &stime);
1567                 goto out;
1568         }
1569
1570         if (!lock_task_sighand(p, &flags))
1571                 return;
1572
1573         switch (who) {
1574                 case RUSAGE_BOTH:
1575                 case RUSAGE_CHILDREN:
1576                         utime = p->signal->cutime;
1577                         stime = p->signal->cstime;
1578                         r->ru_nvcsw = p->signal->cnvcsw;
1579                         r->ru_nivcsw = p->signal->cnivcsw;
1580                         r->ru_minflt = p->signal->cmin_flt;
1581                         r->ru_majflt = p->signal->cmaj_flt;
1582                         r->ru_inblock = p->signal->cinblock;
1583                         r->ru_oublock = p->signal->coublock;
1584
1585                         if (who == RUSAGE_CHILDREN)
1586                                 break;
1587
1588                 case RUSAGE_SELF:
1589                         utime = cputime_add(utime, p->signal->utime);
1590                         stime = cputime_add(stime, p->signal->stime);
1591                         r->ru_nvcsw += p->signal->nvcsw;
1592                         r->ru_nivcsw += p->signal->nivcsw;
1593                         r->ru_minflt += p->signal->min_flt;
1594                         r->ru_majflt += p->signal->maj_flt;
1595                         r->ru_inblock += p->signal->inblock;
1596                         r->ru_oublock += p->signal->oublock;
1597                         t = p;
1598                         do {
1599                                 accumulate_thread_rusage(t, r, &utime, &stime);
1600                                 t = next_thread(t);
1601                         } while (t != p);
1602                         break;
1603
1604                 default:
1605                         BUG();
1606         }
1607         unlock_task_sighand(p, &flags);
1608
1609 out:
1610         cputime_to_timeval(utime, &r->ru_utime);
1611         cputime_to_timeval(stime, &r->ru_stime);
1612 }
1613
1614 int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
1615 {
1616         struct rusage r;
1617         k_getrusage(p, who, &r);
1618         return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
1619 }
1620
1621 asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
1622 {
1623         if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
1624             who != RUSAGE_THREAD)
1625                 return -EINVAL;
1626         return getrusage(current, who, ru);
1627 }
1628
1629 asmlinkage long sys_umask(int mask)
1630 {
1631         mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
1632         return mask;
1633 }
1634
1635 asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
1636                           unsigned long arg4, unsigned long arg5)
1637 {
1638         long error = 0;
1639
1640         if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
1641                 return error;
1642
1643         switch (option) {
1644                 case PR_SET_PDEATHSIG:
1645                         if (!valid_signal(arg2)) {
1646                                 error = -EINVAL;
1647                                 break;
1648                         }
1649                         current->pdeath_signal = arg2;
1650                         break;
1651                 case PR_GET_PDEATHSIG:
1652                         error = put_user(current->pdeath_signal, (int __user *)arg2);
1653                         break;
1654                 case PR_GET_DUMPABLE:
1655                         error = get_dumpable(current->mm);
1656                         break;
1657                 case PR_SET_DUMPABLE:
1658                         if (arg2 < 0 || arg2 > 1) {
1659                                 error = -EINVAL;
1660                                 break;
1661                         }
1662                         set_dumpable(current->mm, arg2);
1663                         break;
1664
1665                 case PR_SET_UNALIGN:
1666                         error = SET_UNALIGN_CTL(current, arg2);
1667                         break;
1668                 case PR_GET_UNALIGN:
1669                         error = GET_UNALIGN_CTL(current, arg2);
1670                         break;
1671                 case PR_SET_FPEMU:
1672                         error = SET_FPEMU_CTL(current, arg2);
1673                         break;
1674                 case PR_GET_FPEMU:
1675                         error = GET_FPEMU_CTL(current, arg2);
1676                         break;
1677                 case PR_SET_FPEXC:
1678                         error = SET_FPEXC_CTL(current, arg2);
1679                         break;
1680                 case PR_GET_FPEXC:
1681                         error = GET_FPEXC_CTL(current, arg2);
1682                         break;
1683                 case PR_GET_TIMING:
1684                         error = PR_TIMING_STATISTICAL;
1685                         break;
1686                 case PR_SET_TIMING:
1687                         if (arg2 != PR_TIMING_STATISTICAL)
1688                                 error = -EINVAL;
1689                         break;
1690
1691                 case PR_SET_NAME: {
1692                         struct task_struct *me = current;
1693                         unsigned char ncomm[sizeof(me->comm)];
1694
1695                         ncomm[sizeof(me->comm)-1] = 0;
1696                         if (strncpy_from_user(ncomm, (char __user *)arg2,
1697                                                 sizeof(me->comm)-1) < 0)
1698                                 return -EFAULT;
1699                         set_task_comm(me, ncomm);
1700                         return 0;
1701                 }
1702                 case PR_GET_NAME: {
1703                         struct task_struct *me = current;
1704                         unsigned char tcomm[sizeof(me->comm)];
1705
1706                         get_task_comm(tcomm, me);
1707                         if (copy_to_user((char __user *)arg2, tcomm, sizeof(tcomm)))
1708                                 return -EFAULT;
1709                         return 0;
1710                 }
1711                 case PR_GET_ENDIAN:
1712                         error = GET_ENDIAN(current, arg2);
1713                         break;
1714                 case PR_SET_ENDIAN:
1715                         error = SET_ENDIAN(current, arg2);
1716                         break;
1717
1718                 case PR_GET_SECCOMP:
1719                         error = prctl_get_seccomp();
1720                         break;
1721                 case PR_SET_SECCOMP:
1722                         error = prctl_set_seccomp(arg2);
1723                         break;
1724                 case PR_GET_TSC:
1725                         error = GET_TSC_CTL(arg2);
1726                         break;
1727                 case PR_SET_TSC:
1728                         error = SET_TSC_CTL(arg2);
1729                         break;
1730                 case PR_GET_TIMERSLACK:
1731                         error = current->timer_slack_ns;
1732                         break;
1733                 case PR_SET_TIMERSLACK:
1734                         if (arg2 <= 0)
1735                                 current->timer_slack_ns =
1736                                         current->default_timer_slack_ns;
1737                         else
1738                                 current->timer_slack_ns = arg2;
1739                         break;
1740                 default:
1741                         error = -EINVAL;
1742                         break;
1743         }
1744         return error;
1745 }
1746
1747 asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
1748                            struct getcpu_cache __user *unused)
1749 {
1750         int err = 0;
1751         int cpu = raw_smp_processor_id();
1752         if (cpup)
1753                 err |= put_user(cpu, cpup);
1754         if (nodep)
1755                 err |= put_user(cpu_to_node(cpu), nodep);
1756         return err ? -EFAULT : 0;
1757 }
1758
1759 char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
1760
1761 static void argv_cleanup(char **argv, char **envp)
1762 {
1763         argv_free(argv);
1764 }
1765
1766 /**
1767  * orderly_poweroff - Trigger an orderly system poweroff
1768  * @force: force poweroff if command execution fails
1769  *
1770  * This may be called from any context to trigger a system shutdown.
1771  * If the orderly shutdown fails, it will force an immediate shutdown.
1772  */
1773 int orderly_poweroff(bool force)
1774 {
1775         int argc;
1776         char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
1777         static char *envp[] = {
1778                 "HOME=/",
1779                 "PATH=/sbin:/bin:/usr/sbin:/usr/bin",
1780                 NULL
1781         };
1782         int ret = -ENOMEM;
1783         struct subprocess_info *info;
1784
1785         if (argv == NULL) {
1786                 printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
1787                        __func__, poweroff_cmd);
1788                 goto out;
1789         }
1790
1791         info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
1792         if (info == NULL) {
1793                 argv_free(argv);
1794                 goto out;
1795         }
1796
1797         call_usermodehelper_setcleanup(info, argv_cleanup);
1798
1799         ret = call_usermodehelper_exec(info, UMH_NO_WAIT);
1800
1801   out:
1802         if (ret && force) {
1803                 printk(KERN_WARNING "Failed to start orderly shutdown: "
1804                        "forcing the issue\n");
1805
1806                 /* I guess this should try to kick off some daemon to
1807                    sync and poweroff asap.  Or not even bother syncing
1808                    if we're doing an emergency shutdown? */
1809                 emergency_sync();
1810                 kernel_power_off();
1811         }
1812
1813         return ret;
1814 }
1815 EXPORT_SYMBOL_GPL(orderly_poweroff);