power: smb349: add callback to update charger
[linux-2.6.git] / include / linux / hil.h
1 #ifndef _HIL_H_
2 #define _HIL_H_
3
4 /*
5  * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
6  *
7  * Copyright (c) 2001 Brian S. Julin
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions, and the following disclaimer,
15  *    without modification.
16  * 2. The name of the author may not be used to endorse or promote products
17  *    derived from this software without specific prior written permission.
18  *
19  * Alternatively, this software may be distributed under the terms of the
20  * GNU General Public License ("GPL").
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
26  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  *
32  * References:
33  * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
34  *
35  * A note of thanks to HP for providing and shipping reference materials
36  * free of charge to help in the development of HIL support for Linux.
37  *
38  */
39
40 #include <asm/types.h>
41
42 /* Physical constants relevant to raw loop/device timing. 
43  */ 
44
45 #define HIL_CLOCK               8MHZ
46 #define HIL_EK1_CLOCK           30HZ
47 #define HIL_EK2_CLOCK           60HZ
48
49 #define HIL_TIMEOUT_DEV         5       /* ms */
50 #define HIL_TIMEOUT_DEVS        10      /* ms */
51 #define HIL_TIMEOUT_NORESP      10      /* ms */
52 #define HIL_TIMEOUT_DEVS_DATA   16      /* ms */
53 #define HIL_TIMEOUT_SELFTEST    200     /* ms */
54
55
56 /* Actual wire line coding.  These will only be useful if someone is 
57  * implementing a software MLC to run HIL devices on a non-parisc machine.
58  */
59
60 #define HIL_WIRE_PACKET_LEN     15
61 enum hil_wire_bitpos {
62         HIL_WIRE_START          = 0,
63         HIL_WIRE_ADDR2,
64         HIL_WIRE_ADDR1,
65         HIL_WIRE_ADDR0,
66         HIL_WIRE_COMMAND,
67         HIL_WIRE_DATA7,
68         HIL_WIRE_DATA6,
69         HIL_WIRE_DATA5,
70         HIL_WIRE_DATA4,
71         HIL_WIRE_DATA3,
72         HIL_WIRE_DATA2,
73         HIL_WIRE_DATA1,
74         HIL_WIRE_DATA0,
75         HIL_WIRE_PARITY,
76         HIL_WIRE_STOP
77 };
78
79 /* HP documentation uses these bit positions to refer to commands;
80  * we will call these "packets".
81  */
82 enum hil_pkt_bitpos {
83         HIL_PKT_CMD             = 0x00000800,
84         HIL_PKT_ADDR2           = 0x00000400,
85         HIL_PKT_ADDR1           = 0x00000200,
86         HIL_PKT_ADDR0           = 0x00000100,
87         HIL_PKT_ADDR_MASK       = 0x00000700,
88         HIL_PKT_ADDR_SHIFT      = 8,
89         HIL_PKT_DATA7           = 0x00000080,
90         HIL_PKT_DATA6           = 0x00000040,
91         HIL_PKT_DATA5           = 0x00000020,
92         HIL_PKT_DATA4           = 0x00000010,
93         HIL_PKT_DATA3           = 0x00000008,
94         HIL_PKT_DATA2           = 0x00000004,
95         HIL_PKT_DATA1           = 0x00000002,
96         HIL_PKT_DATA0           = 0x00000001,
97         HIL_PKT_DATA_MASK       = 0x000000FF,
98         HIL_PKT_DATA_SHIFT      = 0
99 };
100
101 /* The HIL MLC also has several error/status/control bits.  We extend the 
102  * "packet" to include these when direct access to the MLC is available,
103  * or emulate them in cases where they are not available. 
104  *
105  * This way the device driver knows that the underlying MLC driver
106  * has had to deal with loop errors.
107  */
108 enum hil_error_bitpos {
109         HIL_ERR_OB      = 0x00000800, /* MLC is busy sending an auto-poll, 
110                                          or we have filled up the output 
111                                          buffer and must wait. */
112         HIL_ERR_INT     = 0x00010000, /* A normal interrupt has occurred. */
113         HIL_ERR_NMI     = 0x00020000, /* An NMI has occurred. */
114         HIL_ERR_LERR    = 0x00040000, /* A poll didn't come back. */
115         HIL_ERR_PERR    = 0x01000000, /* There was a Parity Error. */
116         HIL_ERR_FERR    = 0x02000000, /* There was a Framing Error. */
117         HIL_ERR_FOF     = 0x04000000  /* Input FIFO Overflowed. */
118 };
119
120 enum hil_control_bitpos {
121         HIL_CTRL_TEST   = 0x00010000,
122         HIL_CTRL_IPF    = 0x00040000,
123         HIL_CTRL_APE    = 0x02000000
124 };
125
126 /* Bits 30,31 are unused, we use them to control write behavior. */
127 #define HIL_DO_ALTER_CTRL  0x40000000 /* Write MSW of packet to control 
128                                           before writing LSW to loop */
129 #define HIL_CTRL_ONLY      0xc0000000 /* *Only* alter the control registers */
130
131 /* This gives us a 32-bit "packet" 
132  */
133 typedef u32 hil_packet;
134
135
136 /* HIL Loop commands 
137  */
138 enum hil_command {
139         HIL_CMD_IFC     = 0x00, /* Interface Clear */
140         HIL_CMD_EPT     = 0x01, /* Enter Pass-Thru Mode */
141         HIL_CMD_ELB     = 0x02, /* Enter Loop-Back Mode */
142         HIL_CMD_IDD     = 0x03, /* Identify and Describe */
143         HIL_CMD_DSR     = 0x04, /* Device Soft Reset */
144         HIL_CMD_PST     = 0x05, /* Perform Self Test */
145         HIL_CMD_RRG     = 0x06, /* Read Register */
146         HIL_CMD_WRG     = 0x07, /* Write Register */
147         HIL_CMD_ACF     = 0x08, /* Auto Configure */
148         HIL_CMDID_ACF   = 0x07, /* Auto Configure bits with incremented ID */
149         HIL_CMD_POL     = 0x10, /* Poll */
150         HIL_CMDCT_POL   = 0x0f, /* Poll command bits with item count  */
151         HIL_CMD_RPL     = 0x20, /* RePoll */
152         HIL_CMDCT_RPL   = 0x0f, /* RePoll command bits with item count */
153         HIL_CMD_RNM     = 0x30, /* Report Name */
154         HIL_CMD_RST     = 0x31, /* Report Status */
155         HIL_CMD_EXD     = 0x32, /* Extended Describe */
156         HIL_CMD_RSC     = 0x33, /* Report Security Code */
157
158         /* 0x34 to 0x3c reserved for future use  */
159
160         HIL_CMD_DKA     = 0x3d, /* Disable Keyswitch Autorepeat */
161         HIL_CMD_EK1     = 0x3e, /* Enable Keyswitch Autorepeat 1 */
162         HIL_CMD_EK2     = 0x3f, /* Enable Keyswitch Autorepeat 2 */
163         HIL_CMD_PR1     = 0x40, /* Prompt1 */  
164         HIL_CMD_PR2     = 0x41, /* Prompt2 */
165         HIL_CMD_PR3     = 0x42, /* Prompt3 */
166         HIL_CMD_PR4     = 0x43, /* Prompt4 */
167         HIL_CMD_PR5     = 0x44, /* Prompt5 */
168         HIL_CMD_PR6     = 0x45, /* Prompt6 */
169         HIL_CMD_PR7     = 0x46, /* Prompt7 */
170         HIL_CMD_PRM     = 0x47, /* Prompt (General Purpose) */
171         HIL_CMD_AK1     = 0x48, /* Acknowledge1 */  
172         HIL_CMD_AK2     = 0x49, /* Acknowledge2 */
173         HIL_CMD_AK3     = 0x4a, /* Acknowledge3 */
174         HIL_CMD_AK4     = 0x4b, /* Acknowledge4 */
175         HIL_CMD_AK5     = 0x4c, /* Acknowledge5 */
176         HIL_CMD_AK6     = 0x4d, /* Acknowledge6 */
177         HIL_CMD_AK7     = 0x4e, /* Acknowledge7 */
178         HIL_CMD_ACK     = 0x4f, /* Acknowledge (General Purpose) */
179
180         /* 0x50 to 0x78 reserved for future use  */
181         /* 0x80 to 0xEF device-specific commands */
182         /* 0xf0 to 0xf9 reserved for future use  */
183
184         HIL_CMD_RIO     = 0xfa, /* Register I/O Error */
185         HIL_CMD_SHR     = 0xfb, /* System Hard Reset */
186         HIL_CMD_TER     = 0xfc, /* Transmission Error */
187         HIL_CMD_CAE     = 0xfd, /* Configuration Address Error */
188         HIL_CMD_DHR     = 0xfe, /* Device Hard Reset */
189
190         /* 0xff is prohibited from use. */
191 };
192
193
194 /* 
195  * Response "records" to HIL commands
196  */
197
198 /* Device ID byte 
199  */
200 #define HIL_IDD_DID_TYPE_MASK           0xe0    /* Primary type bits */
201 #define HIL_IDD_DID_TYPE_KB_INTEGRAL    0xa0    /* Integral keyboard */
202 #define HIL_IDD_DID_TYPE_KB_ITF         0xc0    /* ITD keyboard */
203 #define HIL_IDD_DID_TYPE_KB_RSVD        0xe0    /* Reserved keyboard type */
204 #define HIL_IDD_DID_TYPE_KB_LANG_MASK   0x1f    /* Keyboard locale bits */
205 #define HIL_IDD_DID_KBLANG_USE_ESD      0x00    /* Use ESD Locale instead */
206 #define HIL_IDD_DID_TYPE_ABS            0x80    /* Absolute Positioners */
207 #define HIL_IDD_DID_ABS_RSVD1_MASK      0xf8    /* Reserved */
208 #define HIL_IDD_DID_ABS_RSVD1           0x98
209 #define HIL_IDD_DID_ABS_TABLET_MASK     0xf8    /* Tablets and digitizers */
210 #define HIL_IDD_DID_ABS_TABLET          0x90
211 #define HIL_IDD_DID_ABS_TSCREEN_MASK    0xfc    /* Touch screens */
212 #define HIL_IDD_DID_ABS_TSCREEN         0x8c
213 #define HIL_IDD_DID_ABS_RSVD2_MASK      0xfc    /* Reserved */
214 #define HIL_IDD_DID_ABS_RSVD2           0x88
215 #define HIL_IDD_DID_ABS_RSVD3_MASK      0xfc    /* Reserved */
216 #define HIL_IDD_DID_ABS_RSVD3           0x80
217 #define HIL_IDD_DID_TYPE_REL            0x60    /* Relative Positioners */
218 #define HIL_IDD_DID_REL_RSVD1_MASK      0xf0    /* Reserved */
219 #define HIL_IDD_DID_REL_RSVD1           0x70
220 #define HIL_IDD_DID_REL_RSVD2_MASK      0xfc    /* Reserved */
221 #define HIL_IDD_DID_REL_RSVD2           0x6c
222 #define HIL_IDD_DID_REL_MOUSE_MASK      0xfc    /* Mouse */
223 #define HIL_IDD_DID_REL_MOUSE           0x68
224 #define HIL_IDD_DID_REL_QUAD_MASK       0xf8    /* Other Quadrature Devices */
225 #define HIL_IDD_DID_REL_QUAD            0x60
226 #define HIL_IDD_DID_TYPE_CHAR           0x40    /* Character Entry */
227 #define HIL_IDD_DID_CHAR_BARCODE_MASK   0xfc    /* Barcode Reader */
228 #define HIL_IDD_DID_CHAR_BARCODE        0x5c
229 #define HIL_IDD_DID_CHAR_RSVD1_MASK     0xfc    /* Reserved */
230 #define HIL_IDD_DID_CHAR_RSVD1          0x58
231 #define HIL_IDD_DID_CHAR_RSVD2_MASK     0xf8    /* Reserved */
232 #define HIL_IDD_DID_CHAR_RSVD2          0x50
233 #define HIL_IDD_DID_CHAR_RSVD3_MASK     0xf0    /* Reserved */
234 #define HIL_IDD_DID_CHAR_RSVD3          0x40
235 #define HIL_IDD_DID_TYPE_OTHER          0x20    /* Miscellaneous */
236 #define HIL_IDD_DID_OTHER_RSVD1_MASK    0xf0    /* Reserved */
237 #define HIL_IDD_DID_OTHER_RSVD1         0x30
238 #define HIL_IDD_DID_OTHER_BARCODE_MASK  0xfc    /* Tone Generator */
239 #define HIL_IDD_DID_OTHER_BARCODE       0x2c
240 #define HIL_IDD_DID_OTHER_RSVD2_MASK    0xfc    /* Reserved */
241 #define HIL_IDD_DID_OTHER_RSVD2         0x28
242 #define HIL_IDD_DID_OTHER_RSVD3_MASK    0xf8    /* Reserved */
243 #define HIL_IDD_DID_OTHER_RSVD3         0x20
244 #define HIL_IDD_DID_TYPE_KEYPAD         0x00    /* Vectra Keyboard */
245
246 /* IDD record header 
247  */
248 #define HIL_IDD_HEADER_AXSET_MASK       0x03    /* Number of axis in a set */
249 #define HIL_IDD_HEADER_RSC              0x04    /* Supports RSC command */
250 #define HIL_IDD_HEADER_EXD              0x08    /* Supports EXD command */
251 #define HIL_IDD_HEADER_IOD              0x10    /* IOD byte to follow */
252 #define HIL_IDD_HEADER_16BIT            0x20    /* 16 (vs. 8) bit resolution */
253 #define HIL_IDD_HEADER_ABS              0x40    /* Reports Absolute Position */
254 #define HIL_IDD_HEADER_2X_AXIS          0x80    /* Two sets of 1-3 axis */
255
256 /* I/O Descriptor
257  */
258 #define HIL_IDD_IOD_NBUTTON_MASK        0x07    /* Number of buttons */
259 #define HIL_IDD_IOD_PROXIMITY           0x08    /* Proximity in/out events */
260 #define HIL_IDD_IOD_PROMPT_MASK         0x70    /* Number of prompts/acks */
261 #define HIL_IDD_IOD_PROMPT_SHIFT        4
262 #define HIL_IDD_IOD_PROMPT              0x80    /* Generic prompt/ack */
263
264 #define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
265 ((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
266
267 #define HIL_IDD_NUM_AXSETS(header_packet) \
268 (2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
269
270 #define HIL_IDD_LEN(header_packet) \
271 ((4 - !(header_packet & HIL_IDD_HEADER_IOD) -                   \
272   2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) +             \
273   2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) *                 \
274  !!((header_packet) & HIL_IDD_HEADER_ABS))
275
276 /* The following HIL_IDD_* macros assume you have an array of 
277  * packets and/or unpacked 8-bit data in the order that they 
278  * were received.
279  */
280
281 #define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
282 (!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 :                    \
283 (((*(header_ptr + 1) & HIL_PKT_DATA_MASK) +                     \
284   ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8)               \
285 * ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
286
287 #define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
288 ((!(*(header_ptr) & HIL_IDD_HEADER_ABS) ||                      \
289   (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 :   \
290  ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) +     \
291   ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
292
293 #define HIL_IDD_IOD(header_ptr) \
294 (*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
295
296 #define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
297 ((*header_ptr & HIL_IDD_HEADER_IOD) &&                          \
298  (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
299
300 #define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
301 ((*header_ptr & HIL_IDD_HEADER_IOD) &&                          \
302  (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
303
304 #define HIL_IDD_NUM_BUTTONS(header_ptr) \
305 ((*header_ptr & HIL_IDD_HEADER_IOD) ?                           \
306  (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
307
308 #define HIL_IDD_NUM_PROMPTS(header_ptr) \
309 ((*header_ptr & HIL_IDD_HEADER_IOD) ?                           \
310  ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK)          \
311   >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
312
313 /* The response to HIL EXD commands -- the "extended describe record" */
314 #define HIL_EXD_HEADER_WRG              0x03    /* Supports type2 WRG */
315 #define HIL_EXD_HEADER_WRG_TYPE1        0x01    /* Supports type1 WRG */
316 #define HIL_EXD_HEADER_WRG_TYPE2        0x02    /* Supports type2 WRG */
317 #define HIL_EXD_HEADER_RRG              0x04    /* Supports RRG command */
318 #define HIL_EXD_HEADER_RNM              0x10    /* Supports RNM command */
319 #define HIL_EXD_HEADER_RST              0x20    /* Supports RST command */
320 #define HIL_EXD_HEADER_LOCALE           0x40    /* Contains locale code */
321
322 #define HIL_EXD_NUM_RRG(header_ptr) \
323 ((*header_ptr & HIL_EXD_HEADER_RRG) ? \
324  (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
325
326 #define HIL_EXD_NUM_WWG(header_ptr) \
327 ((*header_ptr & HIL_EXD_HEADER_WRG) ?                           \
328  (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) &     \
329     HIL_PKT_DATA_MASK) : 0)
330
331 #define HIL_EXD_LEN(header_ptr) \
332 (!!(*header_ptr & HIL_EXD_HEADER_RRG) +                         \
333  !!(*header_ptr & HIL_EXD_HEADER_WRG) +                         \
334  !!(*header_ptr & HIL_EXD_HEADER_LOCALE) +                      \
335  2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
336
337 #define HIL_EXD_LOCALE(header_ptr) \
338 (!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 :                  \
339  (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
340
341 #define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
342 (!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 :                       \
343  (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 -                          \
344     !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) +     \
345  ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 -                         \
346      !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
347
348 /* Device locale codes. */ 
349
350 /* Last defined locale code.  Everything above this is "Reserved",
351    and note that this same table applies to the Device ID Byte where 
352    keyboards may have a nationality code which is only 5 bits. */
353 #define HIL_LOCALE_MAX 0x1f
354
355 /* Map to hopefully useful strings.  I was trying to make these look
356    like locale.aliases strings do; maybe that isn't the right table to
357    emulate.  In either case, I didn't have much to work on. */
358 #define HIL_LOCALE_MAP \
359 "",                     /* 0x00 Reserved */             \
360 "",                     /* 0x01 Reserved */             \
361 "",                     /* 0x02 Reserved */             \
362 "swiss.french",         /* 0x03 Swiss/French */         \
363 "portuguese",           /* 0x04 Portuguese */           \
364 "arabic",               /* 0x05 Arabic */               \
365 "hebrew",               /* 0x06 Hebrew */               \
366 "english.canadian",     /* 0x07 Canadian English */     \
367 "turkish",              /* 0x08 Turkish */              \
368 "greek",                /* 0x09 Greek */                \
369 "thai",                 /* 0x0a Thai (Thailand) */      \
370 "italian",              /* 0x0b Italian */              \
371 "korean",               /* 0x0c Hangul (Korea) */       \
372 "dutch",                /* 0x0d Dutch */                \
373 "swedish",              /* 0x0e Swedish */              \
374 "german",               /* 0x0f German */               \
375 "chinese",              /* 0x10 Chinese-PRC */          \
376 "chinese",              /* 0x11 Chinese-ROC */          \
377 "swiss.french",         /* 0x12 Swiss/French II */      \
378 "spanish",              /* 0x13 Spanish */              \
379 "swiss.german",         /* 0x14 Swiss/German II */      \
380 "flemish",              /* 0x15 Belgian (Flemish) */    \
381 "finnish",              /* 0x16 Finnish */              \
382 "english.uk",           /* 0x17 United Kingdom */       \
383 "french.canadian",      /* 0x18 French/Canadian */      \
384 "swiss.german",         /* 0x19 Swiss/German */         \
385 "norwegian",            /* 0x1a Norwegian */            \
386 "french",               /* 0x1b French */               \
387 "danish",               /* 0x1c Danish */               \
388 "japanese",             /* 0x1d Katakana */             \
389 "spanish",              /* 0x1e Latin American/Spanish*/\
390 "english.us"            /* 0x1f United States */        \
391
392
393 /* HIL keycodes */
394 #define HIL_KEYCODES_SET1_TBLSIZE 128
395 #define HIL_KEYCODES_SET1       \
396    KEY_5,               KEY_RESERVED,   KEY_RIGHTALT,   KEY_LEFTALT,    \
397    KEY_RIGHTSHIFT,      KEY_LEFTSHIFT,  KEY_LEFTCTRL,   KEY_SYSRQ,      \
398    KEY_KP4,             KEY_KP8,        KEY_KP5,        KEY_KP9,        \
399    KEY_KP6,             KEY_KP7,        KEY_KPCOMMA,    KEY_KPENTER,    \
400    KEY_KP1,             KEY_KPSLASH,    KEY_KP2,        KEY_KPPLUS,     \
401    KEY_KP3,             KEY_KPASTERISK, KEY_KP0,        KEY_KPMINUS,    \
402    KEY_B,               KEY_V,          KEY_C,          KEY_X,          \
403    KEY_Z,               KEY_RESERVED,   KEY_RESERVED,   KEY_ESC,        \
404    KEY_6,               KEY_F10,        KEY_3,          KEY_F11,        \
405    KEY_KPDOT,           KEY_F9,         KEY_TAB /*KP*/, KEY_F12,        \
406    KEY_H,               KEY_G,          KEY_F,          KEY_D,          \
407    KEY_S,               KEY_A,          KEY_RESERVED,   KEY_CAPSLOCK,   \
408    KEY_U,               KEY_Y,          KEY_T,          KEY_R,          \
409    KEY_E,               KEY_W,          KEY_Q,          KEY_TAB,        \
410    KEY_7,               KEY_6,          KEY_5,          KEY_4,          \
411    KEY_3,               KEY_2,          KEY_1,          KEY_GRAVE,      \
412    KEY_F13,             KEY_F14,        KEY_F15,        KEY_F16,        \
413    KEY_F17,             KEY_F18,        KEY_F19,        KEY_F20,        \
414    KEY_MENU,            KEY_F4,         KEY_F3,         KEY_F2,         \
415    KEY_F1,              KEY_VOLUMEUP,   KEY_STOP,       KEY_SENDFILE,   \
416    KEY_SYSRQ,           KEY_F5,         KEY_F6,         KEY_F7,         \
417    KEY_F8,              KEY_VOLUMEDOWN, KEY_DEL_EOL,    KEY_DEL_EOS,    \
418    KEY_8,               KEY_9,          KEY_0,          KEY_MINUS,      \
419    KEY_EQUAL,           KEY_BACKSPACE,  KEY_INS_LINE,   KEY_DEL_LINE,   \
420    KEY_I,               KEY_O,          KEY_P,          KEY_LEFTBRACE,  \
421    KEY_RIGHTBRACE,      KEY_BACKSLASH,  KEY_INSERT,     KEY_DELETE,     \
422    KEY_J,               KEY_K,          KEY_L,          KEY_SEMICOLON,  \
423    KEY_APOSTROPHE,      KEY_ENTER,      KEY_HOME,       KEY_PAGEUP,     \
424    KEY_M,               KEY_COMMA,      KEY_DOT,        KEY_SLASH,      \
425    KEY_BACKSLASH,       KEY_SELECT,     KEY_102ND,      KEY_PAGEDOWN,   \
426    KEY_N,               KEY_SPACE,      KEY_NEXT,       KEY_RESERVED,   \
427    KEY_LEFT,            KEY_DOWN,       KEY_UP,         KEY_RIGHT
428
429
430 #define HIL_KEYCODES_SET3_TBLSIZE 128
431 #define HIL_KEYCODES_SET3       \
432   KEY_RESERVED, KEY_ESC,        KEY_1,          KEY_2,                  \
433   KEY_3,        KEY_4,          KEY_5,          KEY_6,                  \
434   KEY_7,        KEY_8,          KEY_9,          KEY_0,                  \
435   KEY_MINUS,    KEY_EQUAL,      KEY_BACKSPACE,  KEY_TAB,                \
436   KEY_Q,        KEY_W,          KEY_E,          KEY_R,                  \
437   KEY_T,        KEY_Y,          KEY_U,          KEY_I,                  \
438   KEY_O,        KEY_P,          KEY_LEFTBRACE,  KEY_RIGHTBRACE,         \
439   KEY_ENTER,    KEY_LEFTCTRL,   KEY_A,          KEY_S,                  \
440   KEY_D,        KEY_F,          KEY_G,          KEY_H,                  \
441   KEY_J,        KEY_K,          KEY_L,          KEY_SEMICOLON,          \
442   KEY_APOSTROPHE,KEY_GRAVE,     KEY_LEFTSHIFT,  KEY_BACKSLASH,          \
443   KEY_Z,        KEY_X,          KEY_C,          KEY_V,                  \
444   KEY_B,        KEY_N,          KEY_M,          KEY_COMMA,              \
445   KEY_DOT,      KEY_SLASH,      KEY_RIGHTSHIFT, KEY_KPASTERISK,         \
446   KEY_LEFTALT,  KEY_SPACE,      KEY_CAPSLOCK,   KEY_F1,                 \
447   KEY_F2,       KEY_F3,         KEY_F4,         KEY_F5,                 \
448   KEY_F6,       KEY_F7,         KEY_F8,         KEY_F9,                 \
449   KEY_F10,      KEY_NUMLOCK,    KEY_SCROLLLOCK, KEY_KP7,                \
450   KEY_KP8,      KEY_KP9,        KEY_KPMINUS,    KEY_KP4,                \
451   KEY_KP5,      KEY_KP6,        KEY_KPPLUS,     KEY_KP1,                \
452   KEY_KP2,      KEY_KP3,        KEY_KP0,        KEY_KPDOT,              \
453   KEY_SYSRQ,    KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED,           \
454   KEY_RESERVED, KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED,           \
455   KEY_RESERVED, KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED,           \
456   KEY_UP,       KEY_LEFT,       KEY_DOWN,       KEY_RIGHT,              \
457   KEY_HOME,     KEY_PAGEUP,     KEY_END,        KEY_PAGEDOWN,           \
458   KEY_INSERT,   KEY_DELETE,     KEY_102ND,      KEY_RESERVED,           \
459   KEY_RESERVED, KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED,           \
460   KEY_F1,       KEY_F2,         KEY_F3,         KEY_F4,                 \
461   KEY_F5,       KEY_F6,         KEY_F7,         KEY_F8,                 \
462   KEY_RESERVED, KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED,           \
463   KEY_RESERVED, KEY_RESERVED,   KEY_RESERVED,   KEY_RESERVED
464
465
466 /* Response to POL command, the "poll record header" */
467
468 #define HIL_POL_NUM_AXES_MASK   0x03    /* Number of axis reported */
469 #define HIL_POL_CTS             0x04    /* Device ready to receive data */
470 #define HIL_POL_STATUS_PENDING  0x08    /* Device has status to report */
471 #define HIL_POL_CHARTYPE_MASK   0x70    /* Type of character data to follow */
472 #define HIL_POL_CHARTYPE_NONE   0x00    /* No character data to follow */
473 #define HIL_POL_CHARTYPE_RSVD1  0x10    /* Reserved Set 1 */
474 #define HIL_POL_CHARTYPE_ASCII  0x20    /* U.S. ASCII */
475 #define HIL_POL_CHARTYPE_BINARY 0x30    /* Binary data */
476 #define HIL_POL_CHARTYPE_SET1   0x40    /* Keycode Set 1 */
477 #define HIL_POL_CHARTYPE_RSVD2  0x50    /* Reserved Set 2 */
478 #define HIL_POL_CHARTYPE_SET2   0x60    /* Keycode Set 2 */
479 #define HIL_POL_CHARTYPE_SET3   0x70    /* Keycode Set 3 */
480 #define HIL_POL_AXIS_ALT        0x80    /* Data is from axis set 2 */
481
482
483 #endif /* _HIL_H_ */