dquot: move dquot initialization responsibility into the filesystem
[linux-2.6.git] / fs / ocfs2 / file.c
1 /* -*- mode: c; c-basic-offset: 8; -*-
2  * vim: noexpandtab sw=8 ts=8 sts=0:
3  *
4  * file.c
5  *
6  * File open, close, extend, truncate
7  *
8  * Copyright (C) 2002, 2004 Oracle.  All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public
12  * License as published by the Free Software Foundation; either
13  * version 2 of the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public
21  * License along with this program; if not, write to the
22  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
23  * Boston, MA 021110-1307, USA.
24  */
25
26 #include <linux/capability.h>
27 #include <linux/fs.h>
28 #include <linux/types.h>
29 #include <linux/slab.h>
30 #include <linux/highmem.h>
31 #include <linux/pagemap.h>
32 #include <linux/uio.h>
33 #include <linux/sched.h>
34 #include <linux/splice.h>
35 #include <linux/mount.h>
36 #include <linux/writeback.h>
37 #include <linux/falloc.h>
38 #include <linux/quotaops.h>
39
40 #define MLOG_MASK_PREFIX ML_INODE
41 #include <cluster/masklog.h>
42
43 #include "ocfs2.h"
44
45 #include "alloc.h"
46 #include "aops.h"
47 #include "dir.h"
48 #include "dlmglue.h"
49 #include "extent_map.h"
50 #include "file.h"
51 #include "sysfile.h"
52 #include "inode.h"
53 #include "ioctl.h"
54 #include "journal.h"
55 #include "locks.h"
56 #include "mmap.h"
57 #include "suballoc.h"
58 #include "super.h"
59 #include "xattr.h"
60 #include "acl.h"
61 #include "quota.h"
62 #include "refcounttree.h"
63
64 #include "buffer_head_io.h"
65
66 static int ocfs2_sync_inode(struct inode *inode)
67 {
68         filemap_fdatawrite(inode->i_mapping);
69         return sync_mapping_buffers(inode->i_mapping);
70 }
71
72 static int ocfs2_init_file_private(struct inode *inode, struct file *file)
73 {
74         struct ocfs2_file_private *fp;
75
76         fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL);
77         if (!fp)
78                 return -ENOMEM;
79
80         fp->fp_file = file;
81         mutex_init(&fp->fp_mutex);
82         ocfs2_file_lock_res_init(&fp->fp_flock, fp);
83         file->private_data = fp;
84
85         return 0;
86 }
87
88 static void ocfs2_free_file_private(struct inode *inode, struct file *file)
89 {
90         struct ocfs2_file_private *fp = file->private_data;
91         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
92
93         if (fp) {
94                 ocfs2_simple_drop_lockres(osb, &fp->fp_flock);
95                 ocfs2_lock_res_free(&fp->fp_flock);
96                 kfree(fp);
97                 file->private_data = NULL;
98         }
99 }
100
101 static int ocfs2_file_open(struct inode *inode, struct file *file)
102 {
103         int status;
104         int mode = file->f_flags;
105         struct ocfs2_inode_info *oi = OCFS2_I(inode);
106
107         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
108                    file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
109
110         if (file->f_mode & FMODE_WRITE)
111                 vfs_dq_init(inode);
112
113         spin_lock(&oi->ip_lock);
114
115         /* Check that the inode hasn't been wiped from disk by another
116          * node. If it hasn't then we're safe as long as we hold the
117          * spin lock until our increment of open count. */
118         if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) {
119                 spin_unlock(&oi->ip_lock);
120
121                 status = -ENOENT;
122                 goto leave;
123         }
124
125         if (mode & O_DIRECT)
126                 oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT;
127
128         oi->ip_open_count++;
129         spin_unlock(&oi->ip_lock);
130
131         status = ocfs2_init_file_private(inode, file);
132         if (status) {
133                 /*
134                  * We want to set open count back if we're failing the
135                  * open.
136                  */
137                 spin_lock(&oi->ip_lock);
138                 oi->ip_open_count--;
139                 spin_unlock(&oi->ip_lock);
140         }
141
142 leave:
143         mlog_exit(status);
144         return status;
145 }
146
147 static int ocfs2_file_release(struct inode *inode, struct file *file)
148 {
149         struct ocfs2_inode_info *oi = OCFS2_I(inode);
150
151         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
152                        file->f_path.dentry->d_name.len,
153                        file->f_path.dentry->d_name.name);
154
155         spin_lock(&oi->ip_lock);
156         if (!--oi->ip_open_count)
157                 oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT;
158         spin_unlock(&oi->ip_lock);
159
160         ocfs2_free_file_private(inode, file);
161
162         mlog_exit(0);
163
164         return 0;
165 }
166
167 static int ocfs2_dir_open(struct inode *inode, struct file *file)
168 {
169         return ocfs2_init_file_private(inode, file);
170 }
171
172 static int ocfs2_dir_release(struct inode *inode, struct file *file)
173 {
174         ocfs2_free_file_private(inode, file);
175         return 0;
176 }
177
178 static int ocfs2_sync_file(struct file *file,
179                            struct dentry *dentry,
180                            int datasync)
181 {
182         int err = 0;
183         journal_t *journal;
184         struct inode *inode = dentry->d_inode;
185         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
186
187         mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
188                    dentry->d_name.len, dentry->d_name.name);
189
190         err = ocfs2_sync_inode(dentry->d_inode);
191         if (err)
192                 goto bail;
193
194         if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
195                 goto bail;
196
197         journal = osb->journal->j_journal;
198         err = jbd2_journal_force_commit(journal);
199
200 bail:
201         mlog_exit(err);
202
203         return (err < 0) ? -EIO : 0;
204 }
205
206 int ocfs2_should_update_atime(struct inode *inode,
207                               struct vfsmount *vfsmnt)
208 {
209         struct timespec now;
210         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
211
212         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
213                 return 0;
214
215         if ((inode->i_flags & S_NOATIME) ||
216             ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
217                 return 0;
218
219         /*
220          * We can be called with no vfsmnt structure - NFSD will
221          * sometimes do this.
222          *
223          * Note that our action here is different than touch_atime() -
224          * if we can't tell whether this is a noatime mount, then we
225          * don't know whether to trust the value of s_atime_quantum.
226          */
227         if (vfsmnt == NULL)
228                 return 0;
229
230         if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
231             ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
232                 return 0;
233
234         if (vfsmnt->mnt_flags & MNT_RELATIME) {
235                 if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
236                     (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
237                         return 1;
238
239                 return 0;
240         }
241
242         now = CURRENT_TIME;
243         if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
244                 return 0;
245         else
246                 return 1;
247 }
248
249 int ocfs2_update_inode_atime(struct inode *inode,
250                              struct buffer_head *bh)
251 {
252         int ret;
253         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
254         handle_t *handle;
255         struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data;
256
257         mlog_entry_void();
258
259         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
260         if (IS_ERR(handle)) {
261                 ret = PTR_ERR(handle);
262                 mlog_errno(ret);
263                 goto out;
264         }
265
266         ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
267                                       OCFS2_JOURNAL_ACCESS_WRITE);
268         if (ret) {
269                 mlog_errno(ret);
270                 goto out_commit;
271         }
272
273         /*
274          * Don't use ocfs2_mark_inode_dirty() here as we don't always
275          * have i_mutex to guard against concurrent changes to other
276          * inode fields.
277          */
278         inode->i_atime = CURRENT_TIME;
279         di->i_atime = cpu_to_le64(inode->i_atime.tv_sec);
280         di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
281
282         ret = ocfs2_journal_dirty(handle, bh);
283         if (ret < 0)
284                 mlog_errno(ret);
285
286 out_commit:
287         ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
288 out:
289         mlog_exit(ret);
290         return ret;
291 }
292
293 static int ocfs2_set_inode_size(handle_t *handle,
294                                 struct inode *inode,
295                                 struct buffer_head *fe_bh,
296                                 u64 new_i_size)
297 {
298         int status;
299
300         mlog_entry_void();
301         i_size_write(inode, new_i_size);
302         inode->i_blocks = ocfs2_inode_sector_count(inode);
303         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
304
305         status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
306         if (status < 0) {
307                 mlog_errno(status);
308                 goto bail;
309         }
310
311 bail:
312         mlog_exit(status);
313         return status;
314 }
315
316 int ocfs2_simple_size_update(struct inode *inode,
317                              struct buffer_head *di_bh,
318                              u64 new_i_size)
319 {
320         int ret;
321         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
322         handle_t *handle = NULL;
323
324         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
325         if (IS_ERR(handle)) {
326                 ret = PTR_ERR(handle);
327                 mlog_errno(ret);
328                 goto out;
329         }
330
331         ret = ocfs2_set_inode_size(handle, inode, di_bh,
332                                    new_i_size);
333         if (ret < 0)
334                 mlog_errno(ret);
335
336         ocfs2_commit_trans(osb, handle);
337 out:
338         return ret;
339 }
340
341 static int ocfs2_cow_file_pos(struct inode *inode,
342                               struct buffer_head *fe_bh,
343                               u64 offset)
344 {
345         int status;
346         u32 phys, cpos = offset >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
347         unsigned int num_clusters = 0;
348         unsigned int ext_flags = 0;
349
350         /*
351          * If the new offset is aligned to the range of the cluster, there is
352          * no space for ocfs2_zero_range_for_truncate to fill, so no need to
353          * CoW either.
354          */
355         if ((offset & (OCFS2_SB(inode->i_sb)->s_clustersize - 1)) == 0)
356                 return 0;
357
358         status = ocfs2_get_clusters(inode, cpos, &phys,
359                                     &num_clusters, &ext_flags);
360         if (status) {
361                 mlog_errno(status);
362                 goto out;
363         }
364
365         if (!(ext_flags & OCFS2_EXT_REFCOUNTED))
366                 goto out;
367
368         return ocfs2_refcount_cow(inode, fe_bh, cpos, 1, cpos+1);
369
370 out:
371         return status;
372 }
373
374 static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb,
375                                      struct inode *inode,
376                                      struct buffer_head *fe_bh,
377                                      u64 new_i_size)
378 {
379         int status;
380         handle_t *handle;
381         struct ocfs2_dinode *di;
382         u64 cluster_bytes;
383
384         mlog_entry_void();
385
386         /*
387          * We need to CoW the cluster contains the offset if it is reflinked
388          * since we will call ocfs2_zero_range_for_truncate later which will
389          * write "0" from offset to the end of the cluster.
390          */
391         status = ocfs2_cow_file_pos(inode, fe_bh, new_i_size);
392         if (status) {
393                 mlog_errno(status);
394                 return status;
395         }
396
397         /* TODO: This needs to actually orphan the inode in this
398          * transaction. */
399
400         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
401         if (IS_ERR(handle)) {
402                 status = PTR_ERR(handle);
403                 mlog_errno(status);
404                 goto out;
405         }
406
407         status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), fe_bh,
408                                          OCFS2_JOURNAL_ACCESS_WRITE);
409         if (status < 0) {
410                 mlog_errno(status);
411                 goto out_commit;
412         }
413
414         /*
415          * Do this before setting i_size.
416          */
417         cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size);
418         status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size,
419                                                cluster_bytes);
420         if (status) {
421                 mlog_errno(status);
422                 goto out_commit;
423         }
424
425         i_size_write(inode, new_i_size);
426         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
427
428         di = (struct ocfs2_dinode *) fe_bh->b_data;
429         di->i_size = cpu_to_le64(new_i_size);
430         di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec);
431         di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
432
433         status = ocfs2_journal_dirty(handle, fe_bh);
434         if (status < 0)
435                 mlog_errno(status);
436
437 out_commit:
438         ocfs2_commit_trans(osb, handle);
439 out:
440
441         mlog_exit(status);
442         return status;
443 }
444
445 static int ocfs2_truncate_file(struct inode *inode,
446                                struct buffer_head *di_bh,
447                                u64 new_i_size)
448 {
449         int status = 0;
450         struct ocfs2_dinode *fe = NULL;
451         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
452         struct ocfs2_truncate_context *tc = NULL;
453
454         mlog_entry("(inode = %llu, new_i_size = %llu\n",
455                    (unsigned long long)OCFS2_I(inode)->ip_blkno,
456                    (unsigned long long)new_i_size);
457
458         /* We trust di_bh because it comes from ocfs2_inode_lock(), which
459          * already validated it */
460         fe = (struct ocfs2_dinode *) di_bh->b_data;
461
462         mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode),
463                         "Inode %llu, inode i_size = %lld != di "
464                         "i_size = %llu, i_flags = 0x%x\n",
465                         (unsigned long long)OCFS2_I(inode)->ip_blkno,
466                         i_size_read(inode),
467                         (unsigned long long)le64_to_cpu(fe->i_size),
468                         le32_to_cpu(fe->i_flags));
469
470         if (new_i_size > le64_to_cpu(fe->i_size)) {
471                 mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n",
472                      (unsigned long long)le64_to_cpu(fe->i_size),
473                      (unsigned long long)new_i_size);
474                 status = -EINVAL;
475                 mlog_errno(status);
476                 goto bail;
477         }
478
479         mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n",
480              (unsigned long long)le64_to_cpu(fe->i_blkno),
481              (unsigned long long)le64_to_cpu(fe->i_size),
482              (unsigned long long)new_i_size);
483
484         /* lets handle the simple truncate cases before doing any more
485          * cluster locking. */
486         if (new_i_size == le64_to_cpu(fe->i_size))
487                 goto bail;
488
489         down_write(&OCFS2_I(inode)->ip_alloc_sem);
490
491         /*
492          * The inode lock forced other nodes to sync and drop their
493          * pages, which (correctly) happens even if we have a truncate
494          * without allocation change - ocfs2 cluster sizes can be much
495          * greater than page size, so we have to truncate them
496          * anyway.
497          */
498         unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
499         truncate_inode_pages(inode->i_mapping, new_i_size);
500
501         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
502                 status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
503                                                i_size_read(inode), 1);
504                 if (status)
505                         mlog_errno(status);
506
507                 goto bail_unlock_sem;
508         }
509
510         /* alright, we're going to need to do a full blown alloc size
511          * change. Orphan the inode so that recovery can complete the
512          * truncate if necessary. This does the task of marking
513          * i_size. */
514         status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size);
515         if (status < 0) {
516                 mlog_errno(status);
517                 goto bail_unlock_sem;
518         }
519
520         status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc);
521         if (status < 0) {
522                 mlog_errno(status);
523                 goto bail_unlock_sem;
524         }
525
526         status = ocfs2_commit_truncate(osb, inode, di_bh, tc);
527         if (status < 0) {
528                 mlog_errno(status);
529                 goto bail_unlock_sem;
530         }
531
532         /* TODO: orphan dir cleanup here. */
533 bail_unlock_sem:
534         up_write(&OCFS2_I(inode)->ip_alloc_sem);
535
536 bail:
537         if (!status && OCFS2_I(inode)->ip_clusters == 0)
538                 status = ocfs2_try_remove_refcount_tree(inode, di_bh);
539
540         mlog_exit(status);
541         return status;
542 }
543
544 /*
545  * extend file allocation only here.
546  * we'll update all the disk stuff, and oip->alloc_size
547  *
548  * expect stuff to be locked, a transaction started and enough data /
549  * metadata reservations in the contexts.
550  *
551  * Will return -EAGAIN, and a reason if a restart is needed.
552  * If passed in, *reason will always be set, even in error.
553  */
554 int ocfs2_add_inode_data(struct ocfs2_super *osb,
555                          struct inode *inode,
556                          u32 *logical_offset,
557                          u32 clusters_to_add,
558                          int mark_unwritten,
559                          struct buffer_head *fe_bh,
560                          handle_t *handle,
561                          struct ocfs2_alloc_context *data_ac,
562                          struct ocfs2_alloc_context *meta_ac,
563                          enum ocfs2_alloc_restarted *reason_ret)
564 {
565         int ret;
566         struct ocfs2_extent_tree et;
567
568         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), fe_bh);
569         ret = ocfs2_add_clusters_in_btree(handle, &et, logical_offset,
570                                           clusters_to_add, mark_unwritten,
571                                           data_ac, meta_ac, reason_ret);
572
573         return ret;
574 }
575
576 static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
577                                      u32 clusters_to_add, int mark_unwritten)
578 {
579         int status = 0;
580         int restart_func = 0;
581         int credits;
582         u32 prev_clusters;
583         struct buffer_head *bh = NULL;
584         struct ocfs2_dinode *fe = NULL;
585         handle_t *handle = NULL;
586         struct ocfs2_alloc_context *data_ac = NULL;
587         struct ocfs2_alloc_context *meta_ac = NULL;
588         enum ocfs2_alloc_restarted why;
589         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
590         struct ocfs2_extent_tree et;
591         int did_quota = 0;
592
593         mlog_entry("(clusters_to_add = %u)\n", clusters_to_add);
594
595         /*
596          * This function only exists for file systems which don't
597          * support holes.
598          */
599         BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb));
600
601         status = ocfs2_read_inode_block(inode, &bh);
602         if (status < 0) {
603                 mlog_errno(status);
604                 goto leave;
605         }
606         fe = (struct ocfs2_dinode *) bh->b_data;
607
608 restart_all:
609         BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters);
610
611         mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, "
612              "clusters_to_add = %u\n",
613              (unsigned long long)OCFS2_I(inode)->ip_blkno,
614              (long long)i_size_read(inode), le32_to_cpu(fe->i_clusters),
615              clusters_to_add);
616         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), bh);
617         status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0,
618                                        &data_ac, &meta_ac);
619         if (status) {
620                 mlog_errno(status);
621                 goto leave;
622         }
623
624         credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list,
625                                             clusters_to_add);
626         handle = ocfs2_start_trans(osb, credits);
627         if (IS_ERR(handle)) {
628                 status = PTR_ERR(handle);
629                 handle = NULL;
630                 mlog_errno(status);
631                 goto leave;
632         }
633
634 restarted_transaction:
635         status = dquot_alloc_space_nodirty(inode,
636                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
637         if (status)
638                 goto leave;
639         did_quota = 1;
640
641         /* reserve a write to the file entry early on - that we if we
642          * run out of credits in the allocation path, we can still
643          * update i_size. */
644         status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
645                                          OCFS2_JOURNAL_ACCESS_WRITE);
646         if (status < 0) {
647                 mlog_errno(status);
648                 goto leave;
649         }
650
651         prev_clusters = OCFS2_I(inode)->ip_clusters;
652
653         status = ocfs2_add_inode_data(osb,
654                                       inode,
655                                       &logical_start,
656                                       clusters_to_add,
657                                       mark_unwritten,
658                                       bh,
659                                       handle,
660                                       data_ac,
661                                       meta_ac,
662                                       &why);
663         if ((status < 0) && (status != -EAGAIN)) {
664                 if (status != -ENOSPC)
665                         mlog_errno(status);
666                 goto leave;
667         }
668
669         status = ocfs2_journal_dirty(handle, bh);
670         if (status < 0) {
671                 mlog_errno(status);
672                 goto leave;
673         }
674
675         spin_lock(&OCFS2_I(inode)->ip_lock);
676         clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters);
677         spin_unlock(&OCFS2_I(inode)->ip_lock);
678         /* Release unused quota reservation */
679         dquot_free_space(inode,
680                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
681         did_quota = 0;
682
683         if (why != RESTART_NONE && clusters_to_add) {
684                 if (why == RESTART_META) {
685                         mlog(0, "restarting function.\n");
686                         restart_func = 1;
687                 } else {
688                         BUG_ON(why != RESTART_TRANS);
689
690                         mlog(0, "restarting transaction.\n");
691                         /* TODO: This can be more intelligent. */
692                         credits = ocfs2_calc_extend_credits(osb->sb,
693                                                             &fe->id2.i_list,
694                                                             clusters_to_add);
695                         status = ocfs2_extend_trans(handle, credits);
696                         if (status < 0) {
697                                 /* handle still has to be committed at
698                                  * this point. */
699                                 status = -ENOMEM;
700                                 mlog_errno(status);
701                                 goto leave;
702                         }
703                         goto restarted_transaction;
704                 }
705         }
706
707         mlog(0, "fe: i_clusters = %u, i_size=%llu\n",
708              le32_to_cpu(fe->i_clusters),
709              (unsigned long long)le64_to_cpu(fe->i_size));
710         mlog(0, "inode: ip_clusters=%u, i_size=%lld\n",
711              OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode));
712
713 leave:
714         if (status < 0 && did_quota)
715                 dquot_free_space(inode,
716                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
717         if (handle) {
718                 ocfs2_commit_trans(osb, handle);
719                 handle = NULL;
720         }
721         if (data_ac) {
722                 ocfs2_free_alloc_context(data_ac);
723                 data_ac = NULL;
724         }
725         if (meta_ac) {
726                 ocfs2_free_alloc_context(meta_ac);
727                 meta_ac = NULL;
728         }
729         if ((!status) && restart_func) {
730                 restart_func = 0;
731                 goto restart_all;
732         }
733         brelse(bh);
734         bh = NULL;
735
736         mlog_exit(status);
737         return status;
738 }
739
740 /* Some parts of this taken from generic_cont_expand, which turned out
741  * to be too fragile to do exactly what we need without us having to
742  * worry about recursive locking in ->write_begin() and ->write_end(). */
743 static int ocfs2_write_zero_page(struct inode *inode,
744                                  u64 size)
745 {
746         struct address_space *mapping = inode->i_mapping;
747         struct page *page;
748         unsigned long index;
749         unsigned int offset;
750         handle_t *handle = NULL;
751         int ret;
752
753         offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
754         /* ugh.  in prepare/commit_write, if from==to==start of block, we
755         ** skip the prepare.  make sure we never send an offset for the start
756         ** of a block
757         */
758         if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
759                 offset++;
760         }
761         index = size >> PAGE_CACHE_SHIFT;
762
763         page = grab_cache_page(mapping, index);
764         if (!page) {
765                 ret = -ENOMEM;
766                 mlog_errno(ret);
767                 goto out;
768         }
769
770         ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
771         if (ret < 0) {
772                 mlog_errno(ret);
773                 goto out_unlock;
774         }
775
776         if (ocfs2_should_order_data(inode)) {
777                 handle = ocfs2_start_walk_page_trans(inode, page, offset,
778                                                      offset);
779                 if (IS_ERR(handle)) {
780                         ret = PTR_ERR(handle);
781                         handle = NULL;
782                         goto out_unlock;
783                 }
784         }
785
786         /* must not update i_size! */
787         ret = block_commit_write(page, offset, offset);
788         if (ret < 0)
789                 mlog_errno(ret);
790         else
791                 ret = 0;
792
793         if (handle)
794                 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
795 out_unlock:
796         unlock_page(page);
797         page_cache_release(page);
798 out:
799         return ret;
800 }
801
802 static int ocfs2_zero_extend(struct inode *inode,
803                              u64 zero_to_size)
804 {
805         int ret = 0;
806         u64 start_off;
807         struct super_block *sb = inode->i_sb;
808
809         start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
810         while (start_off < zero_to_size) {
811                 ret = ocfs2_write_zero_page(inode, start_off);
812                 if (ret < 0) {
813                         mlog_errno(ret);
814                         goto out;
815                 }
816
817                 start_off += sb->s_blocksize;
818
819                 /*
820                  * Very large extends have the potential to lock up
821                  * the cpu for extended periods of time.
822                  */
823                 cond_resched();
824         }
825
826 out:
827         return ret;
828 }
829
830 int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
831 {
832         int ret;
833         u32 clusters_to_add;
834         struct ocfs2_inode_info *oi = OCFS2_I(inode);
835
836         clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
837         if (clusters_to_add < oi->ip_clusters)
838                 clusters_to_add = 0;
839         else
840                 clusters_to_add -= oi->ip_clusters;
841
842         if (clusters_to_add) {
843                 ret = __ocfs2_extend_allocation(inode, oi->ip_clusters,
844                                                 clusters_to_add, 0);
845                 if (ret) {
846                         mlog_errno(ret);
847                         goto out;
848                 }
849         }
850
851         /*
852          * Call this even if we don't add any clusters to the tree. We
853          * still need to zero the area between the old i_size and the
854          * new i_size.
855          */
856         ret = ocfs2_zero_extend(inode, zero_to);
857         if (ret < 0)
858                 mlog_errno(ret);
859
860 out:
861         return ret;
862 }
863
864 static int ocfs2_extend_file(struct inode *inode,
865                              struct buffer_head *di_bh,
866                              u64 new_i_size)
867 {
868         int ret = 0;
869         struct ocfs2_inode_info *oi = OCFS2_I(inode);
870
871         BUG_ON(!di_bh);
872
873         /* setattr sometimes calls us like this. */
874         if (new_i_size == 0)
875                 goto out;
876
877         if (i_size_read(inode) == new_i_size)
878                 goto out;
879         BUG_ON(new_i_size < i_size_read(inode));
880
881         /*
882          * Fall through for converting inline data, even if the fs
883          * supports sparse files.
884          *
885          * The check for inline data here is legal - nobody can add
886          * the feature since we have i_mutex. We must check it again
887          * after acquiring ip_alloc_sem though, as paths like mmap
888          * might have raced us to converting the inode to extents.
889          */
890         if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
891             && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
892                 goto out_update_size;
893
894         /*
895          * The alloc sem blocks people in read/write from reading our
896          * allocation until we're done changing it. We depend on
897          * i_mutex to block other extend/truncate calls while we're
898          * here.
899          */
900         down_write(&oi->ip_alloc_sem);
901
902         if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
903                 /*
904                  * We can optimize small extends by keeping the inodes
905                  * inline data.
906                  */
907                 if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) {
908                         up_write(&oi->ip_alloc_sem);
909                         goto out_update_size;
910                 }
911
912                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
913                 if (ret) {
914                         up_write(&oi->ip_alloc_sem);
915
916                         mlog_errno(ret);
917                         goto out;
918                 }
919         }
920
921         if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
922                 ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
923
924         up_write(&oi->ip_alloc_sem);
925
926         if (ret < 0) {
927                 mlog_errno(ret);
928                 goto out;
929         }
930
931 out_update_size:
932         ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
933         if (ret < 0)
934                 mlog_errno(ret);
935
936 out:
937         return ret;
938 }
939
940 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
941 {
942         int status = 0, size_change;
943         struct inode *inode = dentry->d_inode;
944         struct super_block *sb = inode->i_sb;
945         struct ocfs2_super *osb = OCFS2_SB(sb);
946         struct buffer_head *bh = NULL;
947         handle_t *handle = NULL;
948         int qtype;
949         struct dquot *transfer_from[MAXQUOTAS] = { };
950         struct dquot *transfer_to[MAXQUOTAS] = { };
951
952         mlog_entry("(0x%p, '%.*s')\n", dentry,
953                    dentry->d_name.len, dentry->d_name.name);
954
955         /* ensuring we don't even attempt to truncate a symlink */
956         if (S_ISLNK(inode->i_mode))
957                 attr->ia_valid &= ~ATTR_SIZE;
958
959         if (attr->ia_valid & ATTR_MODE)
960                 mlog(0, "mode change: %d\n", attr->ia_mode);
961         if (attr->ia_valid & ATTR_UID)
962                 mlog(0, "uid change: %d\n", attr->ia_uid);
963         if (attr->ia_valid & ATTR_GID)
964                 mlog(0, "gid change: %d\n", attr->ia_gid);
965         if (attr->ia_valid & ATTR_SIZE)
966                 mlog(0, "size change...\n");
967         if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME))
968                 mlog(0, "time change...\n");
969
970 #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \
971                            | ATTR_GID | ATTR_UID | ATTR_MODE)
972         if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) {
973                 mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid);
974                 return 0;
975         }
976
977         status = inode_change_ok(inode, attr);
978         if (status)
979                 return status;
980
981         size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
982         if (size_change) {
983                 vfs_dq_init(inode);
984
985                 status = ocfs2_rw_lock(inode, 1);
986                 if (status < 0) {
987                         mlog_errno(status);
988                         goto bail;
989                 }
990         }
991
992         status = ocfs2_inode_lock(inode, &bh, 1);
993         if (status < 0) {
994                 if (status != -ENOENT)
995                         mlog_errno(status);
996                 goto bail_unlock_rw;
997         }
998
999         if (size_change && attr->ia_size != i_size_read(inode)) {
1000                 if (attr->ia_size > sb->s_maxbytes) {
1001                         status = -EFBIG;
1002                         goto bail_unlock;
1003                 }
1004
1005                 if (i_size_read(inode) > attr->ia_size) {
1006                         if (ocfs2_should_order_data(inode)) {
1007                                 status = ocfs2_begin_ordered_truncate(inode,
1008                                                                       attr->ia_size);
1009                                 if (status)
1010                                         goto bail_unlock;
1011                         }
1012                         status = ocfs2_truncate_file(inode, bh, attr->ia_size);
1013                 } else
1014                         status = ocfs2_extend_file(inode, bh, attr->ia_size);
1015                 if (status < 0) {
1016                         if (status != -ENOSPC)
1017                                 mlog_errno(status);
1018                         status = -ENOSPC;
1019                         goto bail_unlock;
1020                 }
1021         }
1022
1023         if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
1024             (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
1025                 /*
1026                  * Gather pointers to quota structures so that allocation /
1027                  * freeing of quota structures happens here and not inside
1028                  * dquot_transfer() where we have problems with lock ordering
1029                  */
1030                 if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
1031                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
1032                     OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
1033                         transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid,
1034                                                       USRQUOTA);
1035                         transfer_from[USRQUOTA] = dqget(sb, inode->i_uid,
1036                                                         USRQUOTA);
1037                         if (!transfer_to[USRQUOTA] || !transfer_from[USRQUOTA]) {
1038                                 status = -ESRCH;
1039                                 goto bail_unlock;
1040                         }
1041                 }
1042                 if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
1043                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
1044                     OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
1045                         transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid,
1046                                                       GRPQUOTA);
1047                         transfer_from[GRPQUOTA] = dqget(sb, inode->i_gid,
1048                                                         GRPQUOTA);
1049                         if (!transfer_to[GRPQUOTA] || !transfer_from[GRPQUOTA]) {
1050                                 status = -ESRCH;
1051                                 goto bail_unlock;
1052                         }
1053                 }
1054                 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS +
1055                                            2 * ocfs2_quota_trans_credits(sb));
1056                 if (IS_ERR(handle)) {
1057                         status = PTR_ERR(handle);
1058                         mlog_errno(status);
1059                         goto bail_unlock;
1060                 }
1061                 status = dquot_transfer(inode, attr);
1062                 if (status < 0)
1063                         goto bail_commit;
1064         } else {
1065                 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1066                 if (IS_ERR(handle)) {
1067                         status = PTR_ERR(handle);
1068                         mlog_errno(status);
1069                         goto bail_unlock;
1070                 }
1071         }
1072
1073         /*
1074          * This will intentionally not wind up calling vmtruncate(),
1075          * since all the work for a size change has been done above.
1076          * Otherwise, we could get into problems with truncate as
1077          * ip_alloc_sem is used there to protect against i_size
1078          * changes.
1079          */
1080         status = inode_setattr(inode, attr);
1081         if (status < 0) {
1082                 mlog_errno(status);
1083                 goto bail_commit;
1084         }
1085
1086         status = ocfs2_mark_inode_dirty(handle, inode, bh);
1087         if (status < 0)
1088                 mlog_errno(status);
1089
1090 bail_commit:
1091         ocfs2_commit_trans(osb, handle);
1092 bail_unlock:
1093         ocfs2_inode_unlock(inode, 1);
1094 bail_unlock_rw:
1095         if (size_change)
1096                 ocfs2_rw_unlock(inode, 1);
1097 bail:
1098         brelse(bh);
1099
1100         /* Release quota pointers in case we acquired them */
1101         for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
1102                 dqput(transfer_to[qtype]);
1103                 dqput(transfer_from[qtype]);
1104         }
1105
1106         if (!status && attr->ia_valid & ATTR_MODE) {
1107                 status = ocfs2_acl_chmod(inode);
1108                 if (status < 0)
1109                         mlog_errno(status);
1110         }
1111
1112         mlog_exit(status);
1113         return status;
1114 }
1115
1116 int ocfs2_getattr(struct vfsmount *mnt,
1117                   struct dentry *dentry,
1118                   struct kstat *stat)
1119 {
1120         struct inode *inode = dentry->d_inode;
1121         struct super_block *sb = dentry->d_inode->i_sb;
1122         struct ocfs2_super *osb = sb->s_fs_info;
1123         int err;
1124
1125         mlog_entry_void();
1126
1127         err = ocfs2_inode_revalidate(dentry);
1128         if (err) {
1129                 if (err != -ENOENT)
1130                         mlog_errno(err);
1131                 goto bail;
1132         }
1133
1134         generic_fillattr(inode, stat);
1135
1136         /* We set the blksize from the cluster size for performance */
1137         stat->blksize = osb->s_clustersize;
1138
1139 bail:
1140         mlog_exit(err);
1141
1142         return err;
1143 }
1144
1145 int ocfs2_permission(struct inode *inode, int mask)
1146 {
1147         int ret;
1148
1149         mlog_entry_void();
1150
1151         ret = ocfs2_inode_lock(inode, NULL, 0);
1152         if (ret) {
1153                 if (ret != -ENOENT)
1154                         mlog_errno(ret);
1155                 goto out;
1156         }
1157
1158         ret = generic_permission(inode, mask, ocfs2_check_acl);
1159
1160         ocfs2_inode_unlock(inode, 0);
1161 out:
1162         mlog_exit(ret);
1163         return ret;
1164 }
1165
1166 static int __ocfs2_write_remove_suid(struct inode *inode,
1167                                      struct buffer_head *bh)
1168 {
1169         int ret;
1170         handle_t *handle;
1171         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1172         struct ocfs2_dinode *di;
1173
1174         mlog_entry("(Inode %llu, mode 0%o)\n",
1175                    (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode);
1176
1177         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1178         if (IS_ERR(handle)) {
1179                 ret = PTR_ERR(handle);
1180                 mlog_errno(ret);
1181                 goto out;
1182         }
1183
1184         ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
1185                                       OCFS2_JOURNAL_ACCESS_WRITE);
1186         if (ret < 0) {
1187                 mlog_errno(ret);
1188                 goto out_trans;
1189         }
1190
1191         inode->i_mode &= ~S_ISUID;
1192         if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP))
1193                 inode->i_mode &= ~S_ISGID;
1194
1195         di = (struct ocfs2_dinode *) bh->b_data;
1196         di->i_mode = cpu_to_le16(inode->i_mode);
1197
1198         ret = ocfs2_journal_dirty(handle, bh);
1199         if (ret < 0)
1200                 mlog_errno(ret);
1201
1202 out_trans:
1203         ocfs2_commit_trans(osb, handle);
1204 out:
1205         mlog_exit(ret);
1206         return ret;
1207 }
1208
1209 /*
1210  * Will look for holes and unwritten extents in the range starting at
1211  * pos for count bytes (inclusive).
1212  */
1213 static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos,
1214                                        size_t count)
1215 {
1216         int ret = 0;
1217         unsigned int extent_flags;
1218         u32 cpos, clusters, extent_len, phys_cpos;
1219         struct super_block *sb = inode->i_sb;
1220
1221         cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1222         clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1223
1224         while (clusters) {
1225                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1226                                          &extent_flags);
1227                 if (ret < 0) {
1228                         mlog_errno(ret);
1229                         goto out;
1230                 }
1231
1232                 if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) {
1233                         ret = 1;
1234                         break;
1235                 }
1236
1237                 if (extent_len > clusters)
1238                         extent_len = clusters;
1239
1240                 clusters -= extent_len;
1241                 cpos += extent_len;
1242         }
1243 out:
1244         return ret;
1245 }
1246
1247 static int ocfs2_write_remove_suid(struct inode *inode)
1248 {
1249         int ret;
1250         struct buffer_head *bh = NULL;
1251
1252         ret = ocfs2_read_inode_block(inode, &bh);
1253         if (ret < 0) {
1254                 mlog_errno(ret);
1255                 goto out;
1256         }
1257
1258         ret =  __ocfs2_write_remove_suid(inode, bh);
1259 out:
1260         brelse(bh);
1261         return ret;
1262 }
1263
1264 /*
1265  * Allocate enough extents to cover the region starting at byte offset
1266  * start for len bytes. Existing extents are skipped, any extents
1267  * added are marked as "unwritten".
1268  */
1269 static int ocfs2_allocate_unwritten_extents(struct inode *inode,
1270                                             u64 start, u64 len)
1271 {
1272         int ret;
1273         u32 cpos, phys_cpos, clusters, alloc_size;
1274         u64 end = start + len;
1275         struct buffer_head *di_bh = NULL;
1276
1277         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1278                 ret = ocfs2_read_inode_block(inode, &di_bh);
1279                 if (ret) {
1280                         mlog_errno(ret);
1281                         goto out;
1282                 }
1283
1284                 /*
1285                  * Nothing to do if the requested reservation range
1286                  * fits within the inode.
1287                  */
1288                 if (ocfs2_size_fits_inline_data(di_bh, end))
1289                         goto out;
1290
1291                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
1292                 if (ret) {
1293                         mlog_errno(ret);
1294                         goto out;
1295                 }
1296         }
1297
1298         /*
1299          * We consider both start and len to be inclusive.
1300          */
1301         cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1302         clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len);
1303         clusters -= cpos;
1304
1305         while (clusters) {
1306                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1307                                          &alloc_size, NULL);
1308                 if (ret) {
1309                         mlog_errno(ret);
1310                         goto out;
1311                 }
1312
1313                 /*
1314                  * Hole or existing extent len can be arbitrary, so
1315                  * cap it to our own allocation request.
1316                  */
1317                 if (alloc_size > clusters)
1318                         alloc_size = clusters;
1319
1320                 if (phys_cpos) {
1321                         /*
1322                          * We already have an allocation at this
1323                          * region so we can safely skip it.
1324                          */
1325                         goto next;
1326                 }
1327
1328                 ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1);
1329                 if (ret) {
1330                         if (ret != -ENOSPC)
1331                                 mlog_errno(ret);
1332                         goto out;
1333                 }
1334
1335 next:
1336                 cpos += alloc_size;
1337                 clusters -= alloc_size;
1338         }
1339
1340         ret = 0;
1341 out:
1342
1343         brelse(di_bh);
1344         return ret;
1345 }
1346
1347 /*
1348  * Truncate a byte range, avoiding pages within partial clusters. This
1349  * preserves those pages for the zeroing code to write to.
1350  */
1351 static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start,
1352                                          u64 byte_len)
1353 {
1354         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1355         loff_t start, end;
1356         struct address_space *mapping = inode->i_mapping;
1357
1358         start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start);
1359         end = byte_start + byte_len;
1360         end = end & ~(osb->s_clustersize - 1);
1361
1362         if (start < end) {
1363                 unmap_mapping_range(mapping, start, end - start, 0);
1364                 truncate_inode_pages_range(mapping, start, end - 1);
1365         }
1366 }
1367
1368 static int ocfs2_zero_partial_clusters(struct inode *inode,
1369                                        u64 start, u64 len)
1370 {
1371         int ret = 0;
1372         u64 tmpend, end = start + len;
1373         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1374         unsigned int csize = osb->s_clustersize;
1375         handle_t *handle;
1376
1377         /*
1378          * The "start" and "end" values are NOT necessarily part of
1379          * the range whose allocation is being deleted. Rather, this
1380          * is what the user passed in with the request. We must zero
1381          * partial clusters here. There's no need to worry about
1382          * physical allocation - the zeroing code knows to skip holes.
1383          */
1384         mlog(0, "byte start: %llu, end: %llu\n",
1385              (unsigned long long)start, (unsigned long long)end);
1386
1387         /*
1388          * If both edges are on a cluster boundary then there's no
1389          * zeroing required as the region is part of the allocation to
1390          * be truncated.
1391          */
1392         if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
1393                 goto out;
1394
1395         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1396         if (IS_ERR(handle)) {
1397                 ret = PTR_ERR(handle);
1398                 mlog_errno(ret);
1399                 goto out;
1400         }
1401
1402         /*
1403          * We want to get the byte offset of the end of the 1st cluster.
1404          */
1405         tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
1406         if (tmpend > end)
1407                 tmpend = end;
1408
1409         mlog(0, "1st range: start: %llu, tmpend: %llu\n",
1410              (unsigned long long)start, (unsigned long long)tmpend);
1411
1412         ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
1413         if (ret)
1414                 mlog_errno(ret);
1415
1416         if (tmpend < end) {
1417                 /*
1418                  * This may make start and end equal, but the zeroing
1419                  * code will skip any work in that case so there's no
1420                  * need to catch it up here.
1421                  */
1422                 start = end & ~(osb->s_clustersize - 1);
1423
1424                 mlog(0, "2nd range: start: %llu, end: %llu\n",
1425                      (unsigned long long)start, (unsigned long long)end);
1426
1427                 ret = ocfs2_zero_range_for_truncate(inode, handle, start, end);
1428                 if (ret)
1429                         mlog_errno(ret);
1430         }
1431
1432         ocfs2_commit_trans(osb, handle);
1433 out:
1434         return ret;
1435 }
1436
1437 static int ocfs2_remove_inode_range(struct inode *inode,
1438                                     struct buffer_head *di_bh, u64 byte_start,
1439                                     u64 byte_len)
1440 {
1441         int ret = 0;
1442         u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
1443         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1444         struct ocfs2_cached_dealloc_ctxt dealloc;
1445         struct address_space *mapping = inode->i_mapping;
1446         struct ocfs2_extent_tree et;
1447
1448         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh);
1449         ocfs2_init_dealloc_ctxt(&dealloc);
1450
1451         if (byte_len == 0)
1452                 return 0;
1453
1454         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1455                 ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
1456                                             byte_start + byte_len, 0);
1457                 if (ret) {
1458                         mlog_errno(ret);
1459                         goto out;
1460                 }
1461                 /*
1462                  * There's no need to get fancy with the page cache
1463                  * truncate of an inline-data inode. We're talking
1464                  * about less than a page here, which will be cached
1465                  * in the dinode buffer anyway.
1466                  */
1467                 unmap_mapping_range(mapping, 0, 0, 0);
1468                 truncate_inode_pages(mapping, 0);
1469                 goto out;
1470         }
1471
1472         trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
1473         trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits;
1474         if (trunc_len >= trunc_start)
1475                 trunc_len -= trunc_start;
1476         else
1477                 trunc_len = 0;
1478
1479         mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n",
1480              (unsigned long long)OCFS2_I(inode)->ip_blkno,
1481              (unsigned long long)byte_start,
1482              (unsigned long long)byte_len, trunc_start, trunc_len);
1483
1484         ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len);
1485         if (ret) {
1486                 mlog_errno(ret);
1487                 goto out;
1488         }
1489
1490         cpos = trunc_start;
1491         while (trunc_len) {
1492                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1493                                          &alloc_size, NULL);
1494                 if (ret) {
1495                         mlog_errno(ret);
1496                         goto out;
1497                 }
1498
1499                 if (alloc_size > trunc_len)
1500                         alloc_size = trunc_len;
1501
1502                 /* Only do work for non-holes */
1503                 if (phys_cpos != 0) {
1504                         ret = ocfs2_remove_btree_range(inode, &et, cpos,
1505                                                        phys_cpos, alloc_size,
1506                                                        &dealloc);
1507                         if (ret) {
1508                                 mlog_errno(ret);
1509                                 goto out;
1510                         }
1511                 }
1512
1513                 cpos += alloc_size;
1514                 trunc_len -= alloc_size;
1515         }
1516
1517         ocfs2_truncate_cluster_pages(inode, byte_start, byte_len);
1518
1519 out:
1520         ocfs2_schedule_truncate_log_flush(osb, 1);
1521         ocfs2_run_deallocs(osb, &dealloc);
1522
1523         return ret;
1524 }
1525
1526 /*
1527  * Parts of this function taken from xfs_change_file_space()
1528  */
1529 static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
1530                                      loff_t f_pos, unsigned int cmd,
1531                                      struct ocfs2_space_resv *sr,
1532                                      int change_size)
1533 {
1534         int ret;
1535         s64 llen;
1536         loff_t size;
1537         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1538         struct buffer_head *di_bh = NULL;
1539         handle_t *handle;
1540         unsigned long long max_off = inode->i_sb->s_maxbytes;
1541
1542         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
1543                 return -EROFS;
1544
1545         mutex_lock(&inode->i_mutex);
1546
1547         /*
1548          * This prevents concurrent writes on other nodes
1549          */
1550         ret = ocfs2_rw_lock(inode, 1);
1551         if (ret) {
1552                 mlog_errno(ret);
1553                 goto out;
1554         }
1555
1556         ret = ocfs2_inode_lock(inode, &di_bh, 1);
1557         if (ret) {
1558                 mlog_errno(ret);
1559                 goto out_rw_unlock;
1560         }
1561
1562         if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) {
1563                 ret = -EPERM;
1564                 goto out_inode_unlock;
1565         }
1566
1567         switch (sr->l_whence) {
1568         case 0: /*SEEK_SET*/
1569                 break;
1570         case 1: /*SEEK_CUR*/
1571                 sr->l_start += f_pos;
1572                 break;
1573         case 2: /*SEEK_END*/
1574                 sr->l_start += i_size_read(inode);
1575                 break;
1576         default:
1577                 ret = -EINVAL;
1578                 goto out_inode_unlock;
1579         }
1580         sr->l_whence = 0;
1581
1582         llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len;
1583
1584         if (sr->l_start < 0
1585             || sr->l_start > max_off
1586             || (sr->l_start + llen) < 0
1587             || (sr->l_start + llen) > max_off) {
1588                 ret = -EINVAL;
1589                 goto out_inode_unlock;
1590         }
1591         size = sr->l_start + sr->l_len;
1592
1593         if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) {
1594                 if (sr->l_len <= 0) {
1595                         ret = -EINVAL;
1596                         goto out_inode_unlock;
1597                 }
1598         }
1599
1600         if (file && should_remove_suid(file->f_path.dentry)) {
1601                 ret = __ocfs2_write_remove_suid(inode, di_bh);
1602                 if (ret) {
1603                         mlog_errno(ret);
1604                         goto out_inode_unlock;
1605                 }
1606         }
1607
1608         down_write(&OCFS2_I(inode)->ip_alloc_sem);
1609         switch (cmd) {
1610         case OCFS2_IOC_RESVSP:
1611         case OCFS2_IOC_RESVSP64:
1612                 /*
1613                  * This takes unsigned offsets, but the signed ones we
1614                  * pass have been checked against overflow above.
1615                  */
1616                 ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start,
1617                                                        sr->l_len);
1618                 break;
1619         case OCFS2_IOC_UNRESVSP:
1620         case OCFS2_IOC_UNRESVSP64:
1621                 ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start,
1622                                                sr->l_len);
1623                 break;
1624         default:
1625                 ret = -EINVAL;
1626         }
1627         up_write(&OCFS2_I(inode)->ip_alloc_sem);
1628         if (ret) {
1629                 mlog_errno(ret);
1630                 goto out_inode_unlock;
1631         }
1632
1633         /*
1634          * We update c/mtime for these changes
1635          */
1636         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1637         if (IS_ERR(handle)) {
1638                 ret = PTR_ERR(handle);
1639                 mlog_errno(ret);
1640                 goto out_inode_unlock;
1641         }
1642
1643         if (change_size && i_size_read(inode) < size)
1644                 i_size_write(inode, size);
1645
1646         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
1647         ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
1648         if (ret < 0)
1649                 mlog_errno(ret);
1650
1651         ocfs2_commit_trans(osb, handle);
1652
1653 out_inode_unlock:
1654         brelse(di_bh);
1655         ocfs2_inode_unlock(inode, 1);
1656 out_rw_unlock:
1657         ocfs2_rw_unlock(inode, 1);
1658
1659 out:
1660         mutex_unlock(&inode->i_mutex);
1661         return ret;
1662 }
1663
1664 int ocfs2_change_file_space(struct file *file, unsigned int cmd,
1665                             struct ocfs2_space_resv *sr)
1666 {
1667         struct inode *inode = file->f_path.dentry->d_inode;
1668         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1669
1670         if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) &&
1671             !ocfs2_writes_unwritten_extents(osb))
1672                 return -ENOTTY;
1673         else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) &&
1674                  !ocfs2_sparse_alloc(osb))
1675                 return -ENOTTY;
1676
1677         if (!S_ISREG(inode->i_mode))
1678                 return -EINVAL;
1679
1680         if (!(file->f_mode & FMODE_WRITE))
1681                 return -EBADF;
1682
1683         return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0);
1684 }
1685
1686 static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset,
1687                             loff_t len)
1688 {
1689         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1690         struct ocfs2_space_resv sr;
1691         int change_size = 1;
1692
1693         if (!ocfs2_writes_unwritten_extents(osb))
1694                 return -EOPNOTSUPP;
1695
1696         if (S_ISDIR(inode->i_mode))
1697                 return -ENODEV;
1698
1699         if (mode & FALLOC_FL_KEEP_SIZE)
1700                 change_size = 0;
1701
1702         sr.l_whence = 0;
1703         sr.l_start = (s64)offset;
1704         sr.l_len = (s64)len;
1705
1706         return __ocfs2_change_file_space(NULL, inode, offset,
1707                                          OCFS2_IOC_RESVSP64, &sr, change_size);
1708 }
1709
1710 int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos,
1711                                    size_t count)
1712 {
1713         int ret = 0;
1714         unsigned int extent_flags;
1715         u32 cpos, clusters, extent_len, phys_cpos;
1716         struct super_block *sb = inode->i_sb;
1717
1718         if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) ||
1719             !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) ||
1720             OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)
1721                 return 0;
1722
1723         cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1724         clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1725
1726         while (clusters) {
1727                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1728                                          &extent_flags);
1729                 if (ret < 0) {
1730                         mlog_errno(ret);
1731                         goto out;
1732                 }
1733
1734                 if (phys_cpos && (extent_flags & OCFS2_EXT_REFCOUNTED)) {
1735                         ret = 1;
1736                         break;
1737                 }
1738
1739                 if (extent_len > clusters)
1740                         extent_len = clusters;
1741
1742                 clusters -= extent_len;
1743                 cpos += extent_len;
1744         }
1745 out:
1746         return ret;
1747 }
1748
1749 static int ocfs2_prepare_inode_for_refcount(struct inode *inode,
1750                                             loff_t pos, size_t count,
1751                                             int *meta_level)
1752 {
1753         int ret;
1754         struct buffer_head *di_bh = NULL;
1755         u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1756         u32 clusters =
1757                 ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
1758
1759         ret = ocfs2_inode_lock(inode, &di_bh, 1);
1760         if (ret) {
1761                 mlog_errno(ret);
1762                 goto out;
1763         }
1764
1765         *meta_level = 1;
1766
1767         ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
1768         if (ret)
1769                 mlog_errno(ret);
1770 out:
1771         brelse(di_bh);
1772         return ret;
1773 }
1774
1775 static int ocfs2_prepare_inode_for_write(struct dentry *dentry,
1776                                          loff_t *ppos,
1777                                          size_t count,
1778                                          int appending,
1779                                          int *direct_io,
1780                                          int *has_refcount)
1781 {
1782         int ret = 0, meta_level = 0;
1783         struct inode *inode = dentry->d_inode;
1784         loff_t saved_pos, end;
1785
1786         /*
1787          * We start with a read level meta lock and only jump to an ex
1788          * if we need to make modifications here.
1789          */
1790         for(;;) {
1791                 ret = ocfs2_inode_lock(inode, NULL, meta_level);
1792                 if (ret < 0) {
1793                         meta_level = -1;
1794                         mlog_errno(ret);
1795                         goto out;
1796                 }
1797
1798                 /* Clear suid / sgid if necessary. We do this here
1799                  * instead of later in the write path because
1800                  * remove_suid() calls ->setattr without any hint that
1801                  * we may have already done our cluster locking. Since
1802                  * ocfs2_setattr() *must* take cluster locks to
1803                  * proceeed, this will lead us to recursively lock the
1804                  * inode. There's also the dinode i_size state which
1805                  * can be lost via setattr during extending writes (we
1806                  * set inode->i_size at the end of a write. */
1807                 if (should_remove_suid(dentry)) {
1808                         if (meta_level == 0) {
1809                                 ocfs2_inode_unlock(inode, meta_level);
1810                                 meta_level = 1;
1811                                 continue;
1812                         }
1813
1814                         ret = ocfs2_write_remove_suid(inode);
1815                         if (ret < 0) {
1816                                 mlog_errno(ret);
1817                                 goto out_unlock;
1818                         }
1819                 }
1820
1821                 /* work on a copy of ppos until we're sure that we won't have
1822                  * to recalculate it due to relocking. */
1823                 if (appending) {
1824                         saved_pos = i_size_read(inode);
1825                         mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos);
1826                 } else {
1827                         saved_pos = *ppos;
1828                 }
1829
1830                 end = saved_pos + count;
1831
1832                 ret = ocfs2_check_range_for_refcount(inode, saved_pos, count);
1833                 if (ret == 1) {
1834                         ocfs2_inode_unlock(inode, meta_level);
1835                         meta_level = -1;
1836
1837                         ret = ocfs2_prepare_inode_for_refcount(inode,
1838                                                                saved_pos,
1839                                                                count,
1840                                                                &meta_level);
1841                         if (has_refcount)
1842                                 *has_refcount = 1;
1843                 }
1844
1845                 if (ret < 0) {
1846                         mlog_errno(ret);
1847                         goto out_unlock;
1848                 }
1849
1850                 /*
1851                  * Skip the O_DIRECT checks if we don't need
1852                  * them.
1853                  */
1854                 if (!direct_io || !(*direct_io))
1855                         break;
1856
1857                 /*
1858                  * There's no sane way to do direct writes to an inode
1859                  * with inline data.
1860                  */
1861                 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1862                         *direct_io = 0;
1863                         break;
1864                 }
1865
1866                 if (has_refcount && *has_refcount == 1) {
1867                         *direct_io = 0;
1868                         break;
1869                 }
1870                 /*
1871                  * Allowing concurrent direct writes means
1872                  * i_size changes wouldn't be synchronized, so
1873                  * one node could wind up truncating another
1874                  * nodes writes.
1875                  */
1876                 if (end > i_size_read(inode)) {
1877                         *direct_io = 0;
1878                         break;
1879                 }
1880
1881                 /*
1882                  * We don't fill holes during direct io, so
1883                  * check for them here. If any are found, the
1884                  * caller will have to retake some cluster
1885                  * locks and initiate the io as buffered.
1886                  */
1887                 ret = ocfs2_check_range_for_holes(inode, saved_pos, count);
1888                 if (ret == 1) {
1889                         *direct_io = 0;
1890                         ret = 0;
1891                 } else if (ret < 0)
1892                         mlog_errno(ret);
1893                 break;
1894         }
1895
1896         if (appending)
1897                 *ppos = saved_pos;
1898
1899 out_unlock:
1900         if (meta_level >= 0)
1901                 ocfs2_inode_unlock(inode, meta_level);
1902
1903 out:
1904         return ret;
1905 }
1906
1907 static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
1908                                     const struct iovec *iov,
1909                                     unsigned long nr_segs,
1910                                     loff_t pos)
1911 {
1912         int ret, direct_io, appending, rw_level, have_alloc_sem  = 0;
1913         int can_do_direct, has_refcount = 0;
1914         ssize_t written = 0;
1915         size_t ocount;          /* original count */
1916         size_t count;           /* after file limit checks */
1917         loff_t old_size, *ppos = &iocb->ki_pos;
1918         u32 old_clusters;
1919         struct file *file = iocb->ki_filp;
1920         struct inode *inode = file->f_path.dentry->d_inode;
1921         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1922
1923         mlog_entry("(0x%p, %u, '%.*s')\n", file,
1924                    (unsigned int)nr_segs,
1925                    file->f_path.dentry->d_name.len,
1926                    file->f_path.dentry->d_name.name);
1927
1928         if (iocb->ki_left == 0)
1929                 return 0;
1930
1931         vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
1932
1933         appending = file->f_flags & O_APPEND ? 1 : 0;
1934         direct_io = file->f_flags & O_DIRECT ? 1 : 0;
1935
1936         mutex_lock(&inode->i_mutex);
1937
1938 relock:
1939         /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
1940         if (direct_io) {
1941                 down_read(&inode->i_alloc_sem);
1942                 have_alloc_sem = 1;
1943         }
1944
1945         /* concurrent O_DIRECT writes are allowed */
1946         rw_level = !direct_io;
1947         ret = ocfs2_rw_lock(inode, rw_level);
1948         if (ret < 0) {
1949                 mlog_errno(ret);
1950                 goto out_sems;
1951         }
1952
1953         can_do_direct = direct_io;
1954         ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
1955                                             iocb->ki_left, appending,
1956                                             &can_do_direct, &has_refcount);
1957         if (ret < 0) {
1958                 mlog_errno(ret);
1959                 goto out;
1960         }
1961
1962         /*
1963          * We can't complete the direct I/O as requested, fall back to
1964          * buffered I/O.
1965          */
1966         if (direct_io && !can_do_direct) {
1967                 ocfs2_rw_unlock(inode, rw_level);
1968                 up_read(&inode->i_alloc_sem);
1969
1970                 have_alloc_sem = 0;
1971                 rw_level = -1;
1972
1973                 direct_io = 0;
1974                 goto relock;
1975         }
1976
1977         /*
1978          * To later detect whether a journal commit for sync writes is
1979          * necessary, we sample i_size, and cluster count here.
1980          */
1981         old_size = i_size_read(inode);
1982         old_clusters = OCFS2_I(inode)->ip_clusters;
1983
1984         /* communicate with ocfs2_dio_end_io */
1985         ocfs2_iocb_set_rw_locked(iocb, rw_level);
1986
1987         if (direct_io) {
1988                 ret = generic_segment_checks(iov, &nr_segs, &ocount,
1989                                              VERIFY_READ);
1990                 if (ret)
1991                         goto out_dio;
1992
1993                 count = ocount;
1994                 ret = generic_write_checks(file, ppos, &count,
1995                                            S_ISBLK(inode->i_mode));
1996                 if (ret)
1997                         goto out_dio;
1998
1999                 written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
2000                                                     ppos, count, ocount);
2001                 if (written < 0) {
2002                         /*
2003                          * direct write may have instantiated a few
2004                          * blocks outside i_size. Trim these off again.
2005                          * Don't need i_size_read because we hold i_mutex.
2006                          */
2007                         if (*ppos + count > inode->i_size)
2008                                 vmtruncate(inode, inode->i_size);
2009                         ret = written;
2010                         goto out_dio;
2011                 }
2012         } else {
2013                 written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
2014         }
2015
2016 out_dio:
2017         /* buffered aio wouldn't have proper lock coverage today */
2018         BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
2019
2020         if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
2021             ((file->f_flags & O_DIRECT) && has_refcount)) {
2022                 ret = filemap_fdatawrite_range(file->f_mapping, pos,
2023                                                pos + count - 1);
2024                 if (ret < 0)
2025                         written = ret;
2026
2027                 if (!ret && (old_size != i_size_read(inode) ||
2028                     old_clusters != OCFS2_I(inode)->ip_clusters ||
2029                     has_refcount)) {
2030                         ret = jbd2_journal_force_commit(osb->journal->j_journal);
2031                         if (ret < 0)
2032                                 written = ret;
2033                 }
2034
2035                 if (!ret)
2036                         ret = filemap_fdatawait_range(file->f_mapping, pos,
2037                                                       pos + count - 1);
2038         }
2039
2040         /*
2041          * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
2042          * function pointer which is called when o_direct io completes so that
2043          * it can unlock our rw lock.  (it's the clustered equivalent of
2044          * i_alloc_sem; protects truncate from racing with pending ios).
2045          * Unfortunately there are error cases which call end_io and others
2046          * that don't.  so we don't have to unlock the rw_lock if either an
2047          * async dio is going to do it in the future or an end_io after an
2048          * error has already done it.
2049          */
2050         if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
2051                 rw_level = -1;
2052                 have_alloc_sem = 0;
2053         }
2054
2055 out:
2056         if (rw_level != -1)
2057                 ocfs2_rw_unlock(inode, rw_level);
2058
2059 out_sems:
2060         if (have_alloc_sem)
2061                 up_read(&inode->i_alloc_sem);
2062
2063         mutex_unlock(&inode->i_mutex);
2064
2065         if (written)
2066                 ret = written;
2067         mlog_exit(ret);
2068         return ret;
2069 }
2070
2071 static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
2072                                 struct file *out,
2073                                 struct splice_desc *sd)
2074 {
2075         int ret;
2076
2077         ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
2078                                             sd->total_len, 0, NULL, NULL);
2079         if (ret < 0) {
2080                 mlog_errno(ret);
2081                 return ret;
2082         }
2083
2084         return splice_from_pipe_feed(pipe, sd, pipe_to_file);
2085 }
2086
2087 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
2088                                        struct file *out,
2089                                        loff_t *ppos,
2090                                        size_t len,
2091                                        unsigned int flags)
2092 {
2093         int ret;
2094         struct address_space *mapping = out->f_mapping;
2095         struct inode *inode = mapping->host;
2096         struct splice_desc sd = {
2097                 .total_len = len,
2098                 .flags = flags,
2099                 .pos = *ppos,
2100                 .u.file = out,
2101         };
2102
2103         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
2104                    (unsigned int)len,
2105                    out->f_path.dentry->d_name.len,
2106                    out->f_path.dentry->d_name.name);
2107
2108         if (pipe->inode)
2109                 mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
2110
2111         splice_from_pipe_begin(&sd);
2112         do {
2113                 ret = splice_from_pipe_next(pipe, &sd);
2114                 if (ret <= 0)
2115                         break;
2116
2117                 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
2118                 ret = ocfs2_rw_lock(inode, 1);
2119                 if (ret < 0)
2120                         mlog_errno(ret);
2121                 else {
2122                         ret = ocfs2_splice_to_file(pipe, out, &sd);
2123                         ocfs2_rw_unlock(inode, 1);
2124                 }
2125                 mutex_unlock(&inode->i_mutex);
2126         } while (ret > 0);
2127         splice_from_pipe_end(pipe, &sd);
2128
2129         if (pipe->inode)
2130                 mutex_unlock(&pipe->inode->i_mutex);
2131
2132         if (sd.num_spliced)
2133                 ret = sd.num_spliced;
2134
2135         if (ret > 0) {
2136                 unsigned long nr_pages;
2137                 int err;
2138
2139                 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
2140
2141                 err = generic_write_sync(out, *ppos, ret);
2142                 if (err)
2143                         ret = err;
2144                 else
2145                         *ppos += ret;
2146
2147                 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
2148         }
2149
2150         mlog_exit(ret);
2151         return ret;
2152 }
2153
2154 static ssize_t ocfs2_file_splice_read(struct file *in,
2155                                       loff_t *ppos,
2156                                       struct pipe_inode_info *pipe,
2157                                       size_t len,
2158                                       unsigned int flags)
2159 {
2160         int ret = 0, lock_level = 0;
2161         struct inode *inode = in->f_path.dentry->d_inode;
2162
2163         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
2164                    (unsigned int)len,
2165                    in->f_path.dentry->d_name.len,
2166                    in->f_path.dentry->d_name.name);
2167
2168         /*
2169          * See the comment in ocfs2_file_aio_read()
2170          */
2171         ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level);
2172         if (ret < 0) {
2173                 mlog_errno(ret);
2174                 goto bail;
2175         }
2176         ocfs2_inode_unlock(inode, lock_level);
2177
2178         ret = generic_file_splice_read(in, ppos, pipe, len, flags);
2179
2180 bail:
2181         mlog_exit(ret);
2182         return ret;
2183 }
2184
2185 static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
2186                                    const struct iovec *iov,
2187                                    unsigned long nr_segs,
2188                                    loff_t pos)
2189 {
2190         int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
2191         struct file *filp = iocb->ki_filp;
2192         struct inode *inode = filp->f_path.dentry->d_inode;
2193
2194         mlog_entry("(0x%p, %u, '%.*s')\n", filp,
2195                    (unsigned int)nr_segs,
2196                    filp->f_path.dentry->d_name.len,
2197                    filp->f_path.dentry->d_name.name);
2198
2199         if (!inode) {
2200                 ret = -EINVAL;
2201                 mlog_errno(ret);
2202                 goto bail;
2203         }
2204
2205         /*
2206          * buffered reads protect themselves in ->readpage().  O_DIRECT reads
2207          * need locks to protect pending reads from racing with truncate.
2208          */
2209         if (filp->f_flags & O_DIRECT) {
2210                 down_read(&inode->i_alloc_sem);
2211                 have_alloc_sem = 1;
2212
2213                 ret = ocfs2_rw_lock(inode, 0);
2214                 if (ret < 0) {
2215                         mlog_errno(ret);
2216                         goto bail;
2217                 }
2218                 rw_level = 0;
2219                 /* communicate with ocfs2_dio_end_io */
2220                 ocfs2_iocb_set_rw_locked(iocb, rw_level);
2221         }
2222
2223         /*
2224          * We're fine letting folks race truncates and extending
2225          * writes with read across the cluster, just like they can
2226          * locally. Hence no rw_lock during read.
2227          *
2228          * Take and drop the meta data lock to update inode fields
2229          * like i_size. This allows the checks down below
2230          * generic_file_aio_read() a chance of actually working.
2231          */
2232         ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
2233         if (ret < 0) {
2234                 mlog_errno(ret);
2235                 goto bail;
2236         }
2237         ocfs2_inode_unlock(inode, lock_level);
2238
2239         ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos);
2240         if (ret == -EINVAL)
2241                 mlog(0, "generic_file_aio_read returned -EINVAL\n");
2242
2243         /* buffered aio wouldn't have proper lock coverage today */
2244         BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
2245
2246         /* see ocfs2_file_aio_write */
2247         if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
2248                 rw_level = -1;
2249                 have_alloc_sem = 0;
2250         }
2251
2252 bail:
2253         if (have_alloc_sem)
2254                 up_read(&inode->i_alloc_sem);
2255         if (rw_level != -1)
2256                 ocfs2_rw_unlock(inode, rw_level);
2257         mlog_exit(ret);
2258
2259         return ret;
2260 }
2261
2262 const struct inode_operations ocfs2_file_iops = {
2263         .setattr        = ocfs2_setattr,
2264         .getattr        = ocfs2_getattr,
2265         .permission     = ocfs2_permission,
2266         .setxattr       = generic_setxattr,
2267         .getxattr       = generic_getxattr,
2268         .listxattr      = ocfs2_listxattr,
2269         .removexattr    = generic_removexattr,
2270         .fallocate      = ocfs2_fallocate,
2271         .fiemap         = ocfs2_fiemap,
2272 };
2273
2274 const struct inode_operations ocfs2_special_file_iops = {
2275         .setattr        = ocfs2_setattr,
2276         .getattr        = ocfs2_getattr,
2277         .permission     = ocfs2_permission,
2278 };
2279
2280 /*
2281  * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with
2282  * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks!
2283  */
2284 const struct file_operations ocfs2_fops = {
2285         .llseek         = generic_file_llseek,
2286         .read           = do_sync_read,
2287         .write          = do_sync_write,
2288         .mmap           = ocfs2_mmap,
2289         .fsync          = ocfs2_sync_file,
2290         .release        = ocfs2_file_release,
2291         .open           = ocfs2_file_open,
2292         .aio_read       = ocfs2_file_aio_read,
2293         .aio_write      = ocfs2_file_aio_write,
2294         .unlocked_ioctl = ocfs2_ioctl,
2295 #ifdef CONFIG_COMPAT
2296         .compat_ioctl   = ocfs2_compat_ioctl,
2297 #endif
2298         .lock           = ocfs2_lock,
2299         .flock          = ocfs2_flock,
2300         .splice_read    = ocfs2_file_splice_read,
2301         .splice_write   = ocfs2_file_splice_write,
2302 };
2303
2304 const struct file_operations ocfs2_dops = {
2305         .llseek         = generic_file_llseek,
2306         .read           = generic_read_dir,
2307         .readdir        = ocfs2_readdir,
2308         .fsync          = ocfs2_sync_file,
2309         .release        = ocfs2_dir_release,
2310         .open           = ocfs2_dir_open,
2311         .unlocked_ioctl = ocfs2_ioctl,
2312 #ifdef CONFIG_COMPAT
2313         .compat_ioctl   = ocfs2_compat_ioctl,
2314 #endif
2315         .lock           = ocfs2_lock,
2316         .flock          = ocfs2_flock,
2317 };
2318
2319 /*
2320  * POSIX-lockless variants of our file_operations.
2321  *
2322  * These will be used if the underlying cluster stack does not support
2323  * posix file locking, if the user passes the "localflocks" mount
2324  * option, or if we have a local-only fs.
2325  *
2326  * ocfs2_flock is in here because all stacks handle UNIX file locks,
2327  * so we still want it in the case of no stack support for
2328  * plocks. Internally, it will do the right thing when asked to ignore
2329  * the cluster.
2330  */
2331 const struct file_operations ocfs2_fops_no_plocks = {
2332         .llseek         = generic_file_llseek,
2333         .read           = do_sync_read,
2334         .write          = do_sync_write,
2335         .mmap           = ocfs2_mmap,
2336         .fsync          = ocfs2_sync_file,
2337         .release        = ocfs2_file_release,
2338         .open           = ocfs2_file_open,
2339         .aio_read       = ocfs2_file_aio_read,
2340         .aio_write      = ocfs2_file_aio_write,
2341         .unlocked_ioctl = ocfs2_ioctl,
2342 #ifdef CONFIG_COMPAT
2343         .compat_ioctl   = ocfs2_compat_ioctl,
2344 #endif
2345         .flock          = ocfs2_flock,
2346         .splice_read    = ocfs2_file_splice_read,
2347         .splice_write   = ocfs2_file_splice_write,
2348 };
2349
2350 const struct file_operations ocfs2_dops_no_plocks = {
2351         .llseek         = generic_file_llseek,
2352         .read           = generic_read_dir,
2353         .readdir        = ocfs2_readdir,
2354         .fsync          = ocfs2_sync_file,
2355         .release        = ocfs2_dir_release,
2356         .open           = ocfs2_dir_open,
2357         .unlocked_ioctl = ocfs2_ioctl,
2358 #ifdef CONFIG_COMPAT
2359         .compat_ioctl   = ocfs2_compat_ioctl,
2360 #endif
2361         .flock          = ocfs2_flock,
2362 };