Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.
[linux-2.6.git] / fs / ocfs2 / file.c
1 /* -*- mode: c; c-basic-offset: 8; -*-
2  * vim: noexpandtab sw=8 ts=8 sts=0:
3  *
4  * file.c
5  *
6  * File open, close, extend, truncate
7  *
8  * Copyright (C) 2002, 2004 Oracle.  All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public
12  * License as published by the Free Software Foundation; either
13  * version 2 of the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public
21  * License along with this program; if not, write to the
22  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
23  * Boston, MA 021110-1307, USA.
24  */
25
26 #include <linux/capability.h>
27 #include <linux/fs.h>
28 #include <linux/types.h>
29 #include <linux/slab.h>
30 #include <linux/highmem.h>
31 #include <linux/pagemap.h>
32 #include <linux/uio.h>
33 #include <linux/sched.h>
34 #include <linux/splice.h>
35 #include <linux/mount.h>
36 #include <linux/writeback.h>
37 #include <linux/falloc.h>
38 #include <linux/quotaops.h>
39
40 #define MLOG_MASK_PREFIX ML_INODE
41 #include <cluster/masklog.h>
42
43 #include "ocfs2.h"
44
45 #include "alloc.h"
46 #include "aops.h"
47 #include "dir.h"
48 #include "dlmglue.h"
49 #include "extent_map.h"
50 #include "file.h"
51 #include "sysfile.h"
52 #include "inode.h"
53 #include "ioctl.h"
54 #include "journal.h"
55 #include "locks.h"
56 #include "mmap.h"
57 #include "suballoc.h"
58 #include "super.h"
59 #include "xattr.h"
60 #include "acl.h"
61 #include "quota.h"
62 #include "refcounttree.h"
63
64 #include "buffer_head_io.h"
65
66 static int ocfs2_sync_inode(struct inode *inode)
67 {
68         filemap_fdatawrite(inode->i_mapping);
69         return sync_mapping_buffers(inode->i_mapping);
70 }
71
72 static int ocfs2_init_file_private(struct inode *inode, struct file *file)
73 {
74         struct ocfs2_file_private *fp;
75
76         fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL);
77         if (!fp)
78                 return -ENOMEM;
79
80         fp->fp_file = file;
81         mutex_init(&fp->fp_mutex);
82         ocfs2_file_lock_res_init(&fp->fp_flock, fp);
83         file->private_data = fp;
84
85         return 0;
86 }
87
88 static void ocfs2_free_file_private(struct inode *inode, struct file *file)
89 {
90         struct ocfs2_file_private *fp = file->private_data;
91         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
92
93         if (fp) {
94                 ocfs2_simple_drop_lockres(osb, &fp->fp_flock);
95                 ocfs2_lock_res_free(&fp->fp_flock);
96                 kfree(fp);
97                 file->private_data = NULL;
98         }
99 }
100
101 static int ocfs2_file_open(struct inode *inode, struct file *file)
102 {
103         int status;
104         int mode = file->f_flags;
105         struct ocfs2_inode_info *oi = OCFS2_I(inode);
106
107         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
108                    file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
109
110         if (file->f_mode & FMODE_WRITE)
111                 dquot_initialize(inode);
112
113         spin_lock(&oi->ip_lock);
114
115         /* Check that the inode hasn't been wiped from disk by another
116          * node. If it hasn't then we're safe as long as we hold the
117          * spin lock until our increment of open count. */
118         if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) {
119                 spin_unlock(&oi->ip_lock);
120
121                 status = -ENOENT;
122                 goto leave;
123         }
124
125         if (mode & O_DIRECT)
126                 oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT;
127
128         oi->ip_open_count++;
129         spin_unlock(&oi->ip_lock);
130
131         status = ocfs2_init_file_private(inode, file);
132         if (status) {
133                 /*
134                  * We want to set open count back if we're failing the
135                  * open.
136                  */
137                 spin_lock(&oi->ip_lock);
138                 oi->ip_open_count--;
139                 spin_unlock(&oi->ip_lock);
140         }
141
142 leave:
143         mlog_exit(status);
144         return status;
145 }
146
147 static int ocfs2_file_release(struct inode *inode, struct file *file)
148 {
149         struct ocfs2_inode_info *oi = OCFS2_I(inode);
150
151         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
152                        file->f_path.dentry->d_name.len,
153                        file->f_path.dentry->d_name.name);
154
155         spin_lock(&oi->ip_lock);
156         if (!--oi->ip_open_count)
157                 oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT;
158         spin_unlock(&oi->ip_lock);
159
160         ocfs2_free_file_private(inode, file);
161
162         mlog_exit(0);
163
164         return 0;
165 }
166
167 static int ocfs2_dir_open(struct inode *inode, struct file *file)
168 {
169         return ocfs2_init_file_private(inode, file);
170 }
171
172 static int ocfs2_dir_release(struct inode *inode, struct file *file)
173 {
174         ocfs2_free_file_private(inode, file);
175         return 0;
176 }
177
178 static int ocfs2_sync_file(struct file *file,
179                            struct dentry *dentry,
180                            int datasync)
181 {
182         int err = 0;
183         journal_t *journal;
184         struct inode *inode = dentry->d_inode;
185         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
186
187         mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
188                    dentry->d_name.len, dentry->d_name.name);
189
190         err = ocfs2_sync_inode(dentry->d_inode);
191         if (err)
192                 goto bail;
193
194         if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
195                 goto bail;
196
197         journal = osb->journal->j_journal;
198         err = jbd2_journal_force_commit(journal);
199
200 bail:
201         mlog_exit(err);
202
203         return (err < 0) ? -EIO : 0;
204 }
205
206 int ocfs2_should_update_atime(struct inode *inode,
207                               struct vfsmount *vfsmnt)
208 {
209         struct timespec now;
210         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
211
212         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
213                 return 0;
214
215         if ((inode->i_flags & S_NOATIME) ||
216             ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
217                 return 0;
218
219         /*
220          * We can be called with no vfsmnt structure - NFSD will
221          * sometimes do this.
222          *
223          * Note that our action here is different than touch_atime() -
224          * if we can't tell whether this is a noatime mount, then we
225          * don't know whether to trust the value of s_atime_quantum.
226          */
227         if (vfsmnt == NULL)
228                 return 0;
229
230         if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
231             ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
232                 return 0;
233
234         if (vfsmnt->mnt_flags & MNT_RELATIME) {
235                 if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
236                     (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
237                         return 1;
238
239                 return 0;
240         }
241
242         now = CURRENT_TIME;
243         if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
244                 return 0;
245         else
246                 return 1;
247 }
248
249 int ocfs2_update_inode_atime(struct inode *inode,
250                              struct buffer_head *bh)
251 {
252         int ret;
253         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
254         handle_t *handle;
255         struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data;
256
257         mlog_entry_void();
258
259         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
260         if (IS_ERR(handle)) {
261                 ret = PTR_ERR(handle);
262                 mlog_errno(ret);
263                 goto out;
264         }
265
266         ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
267                                       OCFS2_JOURNAL_ACCESS_WRITE);
268         if (ret) {
269                 mlog_errno(ret);
270                 goto out_commit;
271         }
272
273         /*
274          * Don't use ocfs2_mark_inode_dirty() here as we don't always
275          * have i_mutex to guard against concurrent changes to other
276          * inode fields.
277          */
278         inode->i_atime = CURRENT_TIME;
279         di->i_atime = cpu_to_le64(inode->i_atime.tv_sec);
280         di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
281         ocfs2_journal_dirty(handle, bh);
282
283 out_commit:
284         ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
285 out:
286         mlog_exit(ret);
287         return ret;
288 }
289
290 static int ocfs2_set_inode_size(handle_t *handle,
291                                 struct inode *inode,
292                                 struct buffer_head *fe_bh,
293                                 u64 new_i_size)
294 {
295         int status;
296
297         mlog_entry_void();
298         i_size_write(inode, new_i_size);
299         inode->i_blocks = ocfs2_inode_sector_count(inode);
300         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
301
302         status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
303         if (status < 0) {
304                 mlog_errno(status);
305                 goto bail;
306         }
307
308 bail:
309         mlog_exit(status);
310         return status;
311 }
312
313 int ocfs2_simple_size_update(struct inode *inode,
314                              struct buffer_head *di_bh,
315                              u64 new_i_size)
316 {
317         int ret;
318         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
319         handle_t *handle = NULL;
320
321         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
322         if (IS_ERR(handle)) {
323                 ret = PTR_ERR(handle);
324                 mlog_errno(ret);
325                 goto out;
326         }
327
328         ret = ocfs2_set_inode_size(handle, inode, di_bh,
329                                    new_i_size);
330         if (ret < 0)
331                 mlog_errno(ret);
332
333         ocfs2_commit_trans(osb, handle);
334 out:
335         return ret;
336 }
337
338 static int ocfs2_cow_file_pos(struct inode *inode,
339                               struct buffer_head *fe_bh,
340                               u64 offset)
341 {
342         int status;
343         u32 phys, cpos = offset >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
344         unsigned int num_clusters = 0;
345         unsigned int ext_flags = 0;
346
347         /*
348          * If the new offset is aligned to the range of the cluster, there is
349          * no space for ocfs2_zero_range_for_truncate to fill, so no need to
350          * CoW either.
351          */
352         if ((offset & (OCFS2_SB(inode->i_sb)->s_clustersize - 1)) == 0)
353                 return 0;
354
355         status = ocfs2_get_clusters(inode, cpos, &phys,
356                                     &num_clusters, &ext_flags);
357         if (status) {
358                 mlog_errno(status);
359                 goto out;
360         }
361
362         if (!(ext_flags & OCFS2_EXT_REFCOUNTED))
363                 goto out;
364
365         return ocfs2_refcount_cow(inode, fe_bh, cpos, 1, cpos+1);
366
367 out:
368         return status;
369 }
370
371 static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb,
372                                      struct inode *inode,
373                                      struct buffer_head *fe_bh,
374                                      u64 new_i_size)
375 {
376         int status;
377         handle_t *handle;
378         struct ocfs2_dinode *di;
379         u64 cluster_bytes;
380
381         mlog_entry_void();
382
383         /*
384          * We need to CoW the cluster contains the offset if it is reflinked
385          * since we will call ocfs2_zero_range_for_truncate later which will
386          * write "0" from offset to the end of the cluster.
387          */
388         status = ocfs2_cow_file_pos(inode, fe_bh, new_i_size);
389         if (status) {
390                 mlog_errno(status);
391                 return status;
392         }
393
394         /* TODO: This needs to actually orphan the inode in this
395          * transaction. */
396
397         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
398         if (IS_ERR(handle)) {
399                 status = PTR_ERR(handle);
400                 mlog_errno(status);
401                 goto out;
402         }
403
404         status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), fe_bh,
405                                          OCFS2_JOURNAL_ACCESS_WRITE);
406         if (status < 0) {
407                 mlog_errno(status);
408                 goto out_commit;
409         }
410
411         /*
412          * Do this before setting i_size.
413          */
414         cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size);
415         status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size,
416                                                cluster_bytes);
417         if (status) {
418                 mlog_errno(status);
419                 goto out_commit;
420         }
421
422         i_size_write(inode, new_i_size);
423         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
424
425         di = (struct ocfs2_dinode *) fe_bh->b_data;
426         di->i_size = cpu_to_le64(new_i_size);
427         di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec);
428         di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
429
430         ocfs2_journal_dirty(handle, fe_bh);
431
432 out_commit:
433         ocfs2_commit_trans(osb, handle);
434 out:
435
436         mlog_exit(status);
437         return status;
438 }
439
440 static int ocfs2_truncate_file(struct inode *inode,
441                                struct buffer_head *di_bh,
442                                u64 new_i_size)
443 {
444         int status = 0;
445         struct ocfs2_dinode *fe = NULL;
446         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
447
448         mlog_entry("(inode = %llu, new_i_size = %llu\n",
449                    (unsigned long long)OCFS2_I(inode)->ip_blkno,
450                    (unsigned long long)new_i_size);
451
452         /* We trust di_bh because it comes from ocfs2_inode_lock(), which
453          * already validated it */
454         fe = (struct ocfs2_dinode *) di_bh->b_data;
455
456         mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode),
457                         "Inode %llu, inode i_size = %lld != di "
458                         "i_size = %llu, i_flags = 0x%x\n",
459                         (unsigned long long)OCFS2_I(inode)->ip_blkno,
460                         i_size_read(inode),
461                         (unsigned long long)le64_to_cpu(fe->i_size),
462                         le32_to_cpu(fe->i_flags));
463
464         if (new_i_size > le64_to_cpu(fe->i_size)) {
465                 mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n",
466                      (unsigned long long)le64_to_cpu(fe->i_size),
467                      (unsigned long long)new_i_size);
468                 status = -EINVAL;
469                 mlog_errno(status);
470                 goto bail;
471         }
472
473         mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n",
474              (unsigned long long)le64_to_cpu(fe->i_blkno),
475              (unsigned long long)le64_to_cpu(fe->i_size),
476              (unsigned long long)new_i_size);
477
478         /* lets handle the simple truncate cases before doing any more
479          * cluster locking. */
480         if (new_i_size == le64_to_cpu(fe->i_size))
481                 goto bail;
482
483         down_write(&OCFS2_I(inode)->ip_alloc_sem);
484
485         ocfs2_resv_discard(&osb->osb_la_resmap,
486                            &OCFS2_I(inode)->ip_la_data_resv);
487
488         /*
489          * The inode lock forced other nodes to sync and drop their
490          * pages, which (correctly) happens even if we have a truncate
491          * without allocation change - ocfs2 cluster sizes can be much
492          * greater than page size, so we have to truncate them
493          * anyway.
494          */
495         unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
496         truncate_inode_pages(inode->i_mapping, new_i_size);
497
498         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
499                 status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
500                                                i_size_read(inode), 1);
501                 if (status)
502                         mlog_errno(status);
503
504                 goto bail_unlock_sem;
505         }
506
507         /* alright, we're going to need to do a full blown alloc size
508          * change. Orphan the inode so that recovery can complete the
509          * truncate if necessary. This does the task of marking
510          * i_size. */
511         status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size);
512         if (status < 0) {
513                 mlog_errno(status);
514                 goto bail_unlock_sem;
515         }
516
517         status = ocfs2_commit_truncate(osb, inode, di_bh);
518         if (status < 0) {
519                 mlog_errno(status);
520                 goto bail_unlock_sem;
521         }
522
523         /* TODO: orphan dir cleanup here. */
524 bail_unlock_sem:
525         up_write(&OCFS2_I(inode)->ip_alloc_sem);
526
527 bail:
528         if (!status && OCFS2_I(inode)->ip_clusters == 0)
529                 status = ocfs2_try_remove_refcount_tree(inode, di_bh);
530
531         mlog_exit(status);
532         return status;
533 }
534
535 /*
536  * extend file allocation only here.
537  * we'll update all the disk stuff, and oip->alloc_size
538  *
539  * expect stuff to be locked, a transaction started and enough data /
540  * metadata reservations in the contexts.
541  *
542  * Will return -EAGAIN, and a reason if a restart is needed.
543  * If passed in, *reason will always be set, even in error.
544  */
545 int ocfs2_add_inode_data(struct ocfs2_super *osb,
546                          struct inode *inode,
547                          u32 *logical_offset,
548                          u32 clusters_to_add,
549                          int mark_unwritten,
550                          struct buffer_head *fe_bh,
551                          handle_t *handle,
552                          struct ocfs2_alloc_context *data_ac,
553                          struct ocfs2_alloc_context *meta_ac,
554                          enum ocfs2_alloc_restarted *reason_ret)
555 {
556         int ret;
557         struct ocfs2_extent_tree et;
558
559         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), fe_bh);
560         ret = ocfs2_add_clusters_in_btree(handle, &et, logical_offset,
561                                           clusters_to_add, mark_unwritten,
562                                           data_ac, meta_ac, reason_ret);
563
564         return ret;
565 }
566
567 static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
568                                      u32 clusters_to_add, int mark_unwritten)
569 {
570         int status = 0;
571         int restart_func = 0;
572         int credits;
573         u32 prev_clusters;
574         struct buffer_head *bh = NULL;
575         struct ocfs2_dinode *fe = NULL;
576         handle_t *handle = NULL;
577         struct ocfs2_alloc_context *data_ac = NULL;
578         struct ocfs2_alloc_context *meta_ac = NULL;
579         enum ocfs2_alloc_restarted why;
580         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
581         struct ocfs2_extent_tree et;
582         int did_quota = 0;
583
584         mlog_entry("(clusters_to_add = %u)\n", clusters_to_add);
585
586         /*
587          * This function only exists for file systems which don't
588          * support holes.
589          */
590         BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb));
591
592         status = ocfs2_read_inode_block(inode, &bh);
593         if (status < 0) {
594                 mlog_errno(status);
595                 goto leave;
596         }
597         fe = (struct ocfs2_dinode *) bh->b_data;
598
599 restart_all:
600         BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters);
601
602         mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, "
603              "clusters_to_add = %u\n",
604              (unsigned long long)OCFS2_I(inode)->ip_blkno,
605              (long long)i_size_read(inode), le32_to_cpu(fe->i_clusters),
606              clusters_to_add);
607         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), bh);
608         status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0,
609                                        &data_ac, &meta_ac);
610         if (status) {
611                 mlog_errno(status);
612                 goto leave;
613         }
614
615         credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list,
616                                             clusters_to_add);
617         handle = ocfs2_start_trans(osb, credits);
618         if (IS_ERR(handle)) {
619                 status = PTR_ERR(handle);
620                 handle = NULL;
621                 mlog_errno(status);
622                 goto leave;
623         }
624
625 restarted_transaction:
626         status = dquot_alloc_space_nodirty(inode,
627                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
628         if (status)
629                 goto leave;
630         did_quota = 1;
631
632         /* reserve a write to the file entry early on - that we if we
633          * run out of credits in the allocation path, we can still
634          * update i_size. */
635         status = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
636                                          OCFS2_JOURNAL_ACCESS_WRITE);
637         if (status < 0) {
638                 mlog_errno(status);
639                 goto leave;
640         }
641
642         prev_clusters = OCFS2_I(inode)->ip_clusters;
643
644         status = ocfs2_add_inode_data(osb,
645                                       inode,
646                                       &logical_start,
647                                       clusters_to_add,
648                                       mark_unwritten,
649                                       bh,
650                                       handle,
651                                       data_ac,
652                                       meta_ac,
653                                       &why);
654         if ((status < 0) && (status != -EAGAIN)) {
655                 if (status != -ENOSPC)
656                         mlog_errno(status);
657                 goto leave;
658         }
659
660         ocfs2_journal_dirty(handle, bh);
661
662         spin_lock(&OCFS2_I(inode)->ip_lock);
663         clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters);
664         spin_unlock(&OCFS2_I(inode)->ip_lock);
665         /* Release unused quota reservation */
666         dquot_free_space(inode,
667                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
668         did_quota = 0;
669
670         if (why != RESTART_NONE && clusters_to_add) {
671                 if (why == RESTART_META) {
672                         mlog(0, "restarting function.\n");
673                         restart_func = 1;
674                 } else {
675                         BUG_ON(why != RESTART_TRANS);
676
677                         mlog(0, "restarting transaction.\n");
678                         /* TODO: This can be more intelligent. */
679                         credits = ocfs2_calc_extend_credits(osb->sb,
680                                                             &fe->id2.i_list,
681                                                             clusters_to_add);
682                         status = ocfs2_extend_trans(handle, credits);
683                         if (status < 0) {
684                                 /* handle still has to be committed at
685                                  * this point. */
686                                 status = -ENOMEM;
687                                 mlog_errno(status);
688                                 goto leave;
689                         }
690                         goto restarted_transaction;
691                 }
692         }
693
694         mlog(0, "fe: i_clusters = %u, i_size=%llu\n",
695              le32_to_cpu(fe->i_clusters),
696              (unsigned long long)le64_to_cpu(fe->i_size));
697         mlog(0, "inode: ip_clusters=%u, i_size=%lld\n",
698              OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode));
699
700 leave:
701         if (status < 0 && did_quota)
702                 dquot_free_space(inode,
703                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
704         if (handle) {
705                 ocfs2_commit_trans(osb, handle);
706                 handle = NULL;
707         }
708         if (data_ac) {
709                 ocfs2_free_alloc_context(data_ac);
710                 data_ac = NULL;
711         }
712         if (meta_ac) {
713                 ocfs2_free_alloc_context(meta_ac);
714                 meta_ac = NULL;
715         }
716         if ((!status) && restart_func) {
717                 restart_func = 0;
718                 goto restart_all;
719         }
720         brelse(bh);
721         bh = NULL;
722
723         mlog_exit(status);
724         return status;
725 }
726
727 /* Some parts of this taken from generic_cont_expand, which turned out
728  * to be too fragile to do exactly what we need without us having to
729  * worry about recursive locking in ->write_begin() and ->write_end(). */
730 static int ocfs2_write_zero_page(struct inode *inode,
731                                  u64 size)
732 {
733         struct address_space *mapping = inode->i_mapping;
734         struct page *page;
735         unsigned long index;
736         unsigned int offset;
737         handle_t *handle = NULL;
738         int ret;
739
740         offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
741         /* ugh.  in prepare/commit_write, if from==to==start of block, we
742         ** skip the prepare.  make sure we never send an offset for the start
743         ** of a block
744         */
745         if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
746                 offset++;
747         }
748         index = size >> PAGE_CACHE_SHIFT;
749
750         page = grab_cache_page(mapping, index);
751         if (!page) {
752                 ret = -ENOMEM;
753                 mlog_errno(ret);
754                 goto out;
755         }
756
757         ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
758         if (ret < 0) {
759                 mlog_errno(ret);
760                 goto out_unlock;
761         }
762
763         if (ocfs2_should_order_data(inode)) {
764                 handle = ocfs2_start_walk_page_trans(inode, page, offset,
765                                                      offset);
766                 if (IS_ERR(handle)) {
767                         ret = PTR_ERR(handle);
768                         handle = NULL;
769                         goto out_unlock;
770                 }
771         }
772
773         /* must not update i_size! */
774         ret = block_commit_write(page, offset, offset);
775         if (ret < 0)
776                 mlog_errno(ret);
777         else
778                 ret = 0;
779
780         if (handle)
781                 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
782 out_unlock:
783         unlock_page(page);
784         page_cache_release(page);
785 out:
786         return ret;
787 }
788
789 static int ocfs2_zero_extend(struct inode *inode,
790                              u64 zero_to_size)
791 {
792         int ret = 0;
793         u64 start_off;
794         struct super_block *sb = inode->i_sb;
795
796         start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
797         while (start_off < zero_to_size) {
798                 ret = ocfs2_write_zero_page(inode, start_off);
799                 if (ret < 0) {
800                         mlog_errno(ret);
801                         goto out;
802                 }
803
804                 start_off += sb->s_blocksize;
805
806                 /*
807                  * Very large extends have the potential to lock up
808                  * the cpu for extended periods of time.
809                  */
810                 cond_resched();
811         }
812
813 out:
814         return ret;
815 }
816
817 int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
818 {
819         int ret;
820         u32 clusters_to_add;
821         struct ocfs2_inode_info *oi = OCFS2_I(inode);
822
823         clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
824         if (clusters_to_add < oi->ip_clusters)
825                 clusters_to_add = 0;
826         else
827                 clusters_to_add -= oi->ip_clusters;
828
829         if (clusters_to_add) {
830                 ret = __ocfs2_extend_allocation(inode, oi->ip_clusters,
831                                                 clusters_to_add, 0);
832                 if (ret) {
833                         mlog_errno(ret);
834                         goto out;
835                 }
836         }
837
838         /*
839          * Call this even if we don't add any clusters to the tree. We
840          * still need to zero the area between the old i_size and the
841          * new i_size.
842          */
843         ret = ocfs2_zero_extend(inode, zero_to);
844         if (ret < 0)
845                 mlog_errno(ret);
846
847 out:
848         return ret;
849 }
850
851 static int ocfs2_extend_file(struct inode *inode,
852                              struct buffer_head *di_bh,
853                              u64 new_i_size)
854 {
855         int ret = 0;
856         struct ocfs2_inode_info *oi = OCFS2_I(inode);
857
858         BUG_ON(!di_bh);
859
860         /* setattr sometimes calls us like this. */
861         if (new_i_size == 0)
862                 goto out;
863
864         if (i_size_read(inode) == new_i_size)
865                 goto out;
866         BUG_ON(new_i_size < i_size_read(inode));
867
868         /*
869          * Fall through for converting inline data, even if the fs
870          * supports sparse files.
871          *
872          * The check for inline data here is legal - nobody can add
873          * the feature since we have i_mutex. We must check it again
874          * after acquiring ip_alloc_sem though, as paths like mmap
875          * might have raced us to converting the inode to extents.
876          */
877         if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
878             && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
879                 goto out_update_size;
880
881         /*
882          * The alloc sem blocks people in read/write from reading our
883          * allocation until we're done changing it. We depend on
884          * i_mutex to block other extend/truncate calls while we're
885          * here.
886          */
887         down_write(&oi->ip_alloc_sem);
888
889         if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
890                 /*
891                  * We can optimize small extends by keeping the inodes
892                  * inline data.
893                  */
894                 if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) {
895                         up_write(&oi->ip_alloc_sem);
896                         goto out_update_size;
897                 }
898
899                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
900                 if (ret) {
901                         up_write(&oi->ip_alloc_sem);
902
903                         mlog_errno(ret);
904                         goto out;
905                 }
906         }
907
908         if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
909                 ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
910
911         up_write(&oi->ip_alloc_sem);
912
913         if (ret < 0) {
914                 mlog_errno(ret);
915                 goto out;
916         }
917
918 out_update_size:
919         ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
920         if (ret < 0)
921                 mlog_errno(ret);
922
923 out:
924         return ret;
925 }
926
927 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
928 {
929         int status = 0, size_change;
930         struct inode *inode = dentry->d_inode;
931         struct super_block *sb = inode->i_sb;
932         struct ocfs2_super *osb = OCFS2_SB(sb);
933         struct buffer_head *bh = NULL;
934         handle_t *handle = NULL;
935         int qtype;
936         struct dquot *transfer_from[MAXQUOTAS] = { };
937         struct dquot *transfer_to[MAXQUOTAS] = { };
938
939         mlog_entry("(0x%p, '%.*s')\n", dentry,
940                    dentry->d_name.len, dentry->d_name.name);
941
942         /* ensuring we don't even attempt to truncate a symlink */
943         if (S_ISLNK(inode->i_mode))
944                 attr->ia_valid &= ~ATTR_SIZE;
945
946         if (attr->ia_valid & ATTR_MODE)
947                 mlog(0, "mode change: %d\n", attr->ia_mode);
948         if (attr->ia_valid & ATTR_UID)
949                 mlog(0, "uid change: %d\n", attr->ia_uid);
950         if (attr->ia_valid & ATTR_GID)
951                 mlog(0, "gid change: %d\n", attr->ia_gid);
952         if (attr->ia_valid & ATTR_SIZE)
953                 mlog(0, "size change...\n");
954         if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME))
955                 mlog(0, "time change...\n");
956
957 #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \
958                            | ATTR_GID | ATTR_UID | ATTR_MODE)
959         if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) {
960                 mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid);
961                 return 0;
962         }
963
964         status = inode_change_ok(inode, attr);
965         if (status)
966                 return status;
967
968         size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
969         if (size_change) {
970                 dquot_initialize(inode);
971
972                 status = ocfs2_rw_lock(inode, 1);
973                 if (status < 0) {
974                         mlog_errno(status);
975                         goto bail;
976                 }
977         }
978
979         status = ocfs2_inode_lock(inode, &bh, 1);
980         if (status < 0) {
981                 if (status != -ENOENT)
982                         mlog_errno(status);
983                 goto bail_unlock_rw;
984         }
985
986         if (size_change && attr->ia_size != i_size_read(inode)) {
987                 status = inode_newsize_ok(inode, attr->ia_size);
988                 if (status)
989                         goto bail_unlock;
990
991                 if (i_size_read(inode) > attr->ia_size) {
992                         if (ocfs2_should_order_data(inode)) {
993                                 status = ocfs2_begin_ordered_truncate(inode,
994                                                                       attr->ia_size);
995                                 if (status)
996                                         goto bail_unlock;
997                         }
998                         status = ocfs2_truncate_file(inode, bh, attr->ia_size);
999                 } else
1000                         status = ocfs2_extend_file(inode, bh, attr->ia_size);
1001                 if (status < 0) {
1002                         if (status != -ENOSPC)
1003                                 mlog_errno(status);
1004                         status = -ENOSPC;
1005                         goto bail_unlock;
1006                 }
1007         }
1008
1009         if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
1010             (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
1011                 /*
1012                  * Gather pointers to quota structures so that allocation /
1013                  * freeing of quota structures happens here and not inside
1014                  * dquot_transfer() where we have problems with lock ordering
1015                  */
1016                 if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
1017                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
1018                     OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
1019                         transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid,
1020                                                       USRQUOTA);
1021                         transfer_from[USRQUOTA] = dqget(sb, inode->i_uid,
1022                                                         USRQUOTA);
1023                         if (!transfer_to[USRQUOTA] || !transfer_from[USRQUOTA]) {
1024                                 status = -ESRCH;
1025                                 goto bail_unlock;
1026                         }
1027                 }
1028                 if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
1029                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
1030                     OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
1031                         transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid,
1032                                                       GRPQUOTA);
1033                         transfer_from[GRPQUOTA] = dqget(sb, inode->i_gid,
1034                                                         GRPQUOTA);
1035                         if (!transfer_to[GRPQUOTA] || !transfer_from[GRPQUOTA]) {
1036                                 status = -ESRCH;
1037                                 goto bail_unlock;
1038                         }
1039                 }
1040                 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS +
1041                                            2 * ocfs2_quota_trans_credits(sb));
1042                 if (IS_ERR(handle)) {
1043                         status = PTR_ERR(handle);
1044                         mlog_errno(status);
1045                         goto bail_unlock;
1046                 }
1047                 status = dquot_transfer(inode, attr);
1048                 if (status < 0)
1049                         goto bail_commit;
1050         } else {
1051                 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1052                 if (IS_ERR(handle)) {
1053                         status = PTR_ERR(handle);
1054                         mlog_errno(status);
1055                         goto bail_unlock;
1056                 }
1057         }
1058
1059         /*
1060          * This will intentionally not wind up calling vmtruncate(),
1061          * since all the work for a size change has been done above.
1062          * Otherwise, we could get into problems with truncate as
1063          * ip_alloc_sem is used there to protect against i_size
1064          * changes.
1065          */
1066         status = inode_setattr(inode, attr);
1067         if (status < 0) {
1068                 mlog_errno(status);
1069                 goto bail_commit;
1070         }
1071
1072         status = ocfs2_mark_inode_dirty(handle, inode, bh);
1073         if (status < 0)
1074                 mlog_errno(status);
1075
1076 bail_commit:
1077         ocfs2_commit_trans(osb, handle);
1078 bail_unlock:
1079         ocfs2_inode_unlock(inode, 1);
1080 bail_unlock_rw:
1081         if (size_change)
1082                 ocfs2_rw_unlock(inode, 1);
1083 bail:
1084         brelse(bh);
1085
1086         /* Release quota pointers in case we acquired them */
1087         for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
1088                 dqput(transfer_to[qtype]);
1089                 dqput(transfer_from[qtype]);
1090         }
1091
1092         if (!status && attr->ia_valid & ATTR_MODE) {
1093                 status = ocfs2_acl_chmod(inode);
1094                 if (status < 0)
1095                         mlog_errno(status);
1096         }
1097
1098         mlog_exit(status);
1099         return status;
1100 }
1101
1102 int ocfs2_getattr(struct vfsmount *mnt,
1103                   struct dentry *dentry,
1104                   struct kstat *stat)
1105 {
1106         struct inode *inode = dentry->d_inode;
1107         struct super_block *sb = dentry->d_inode->i_sb;
1108         struct ocfs2_super *osb = sb->s_fs_info;
1109         int err;
1110
1111         mlog_entry_void();
1112
1113         err = ocfs2_inode_revalidate(dentry);
1114         if (err) {
1115                 if (err != -ENOENT)
1116                         mlog_errno(err);
1117                 goto bail;
1118         }
1119
1120         generic_fillattr(inode, stat);
1121
1122         /* We set the blksize from the cluster size for performance */
1123         stat->blksize = osb->s_clustersize;
1124
1125 bail:
1126         mlog_exit(err);
1127
1128         return err;
1129 }
1130
1131 int ocfs2_permission(struct inode *inode, int mask)
1132 {
1133         int ret;
1134
1135         mlog_entry_void();
1136
1137         ret = ocfs2_inode_lock(inode, NULL, 0);
1138         if (ret) {
1139                 if (ret != -ENOENT)
1140                         mlog_errno(ret);
1141                 goto out;
1142         }
1143
1144         ret = generic_permission(inode, mask, ocfs2_check_acl);
1145
1146         ocfs2_inode_unlock(inode, 0);
1147 out:
1148         mlog_exit(ret);
1149         return ret;
1150 }
1151
1152 static int __ocfs2_write_remove_suid(struct inode *inode,
1153                                      struct buffer_head *bh)
1154 {
1155         int ret;
1156         handle_t *handle;
1157         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1158         struct ocfs2_dinode *di;
1159
1160         mlog_entry("(Inode %llu, mode 0%o)\n",
1161                    (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode);
1162
1163         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1164         if (IS_ERR(handle)) {
1165                 ret = PTR_ERR(handle);
1166                 mlog_errno(ret);
1167                 goto out;
1168         }
1169
1170         ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), bh,
1171                                       OCFS2_JOURNAL_ACCESS_WRITE);
1172         if (ret < 0) {
1173                 mlog_errno(ret);
1174                 goto out_trans;
1175         }
1176
1177         inode->i_mode &= ~S_ISUID;
1178         if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP))
1179                 inode->i_mode &= ~S_ISGID;
1180
1181         di = (struct ocfs2_dinode *) bh->b_data;
1182         di->i_mode = cpu_to_le16(inode->i_mode);
1183
1184         ocfs2_journal_dirty(handle, bh);
1185
1186 out_trans:
1187         ocfs2_commit_trans(osb, handle);
1188 out:
1189         mlog_exit(ret);
1190         return ret;
1191 }
1192
1193 /*
1194  * Will look for holes and unwritten extents in the range starting at
1195  * pos for count bytes (inclusive).
1196  */
1197 static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos,
1198                                        size_t count)
1199 {
1200         int ret = 0;
1201         unsigned int extent_flags;
1202         u32 cpos, clusters, extent_len, phys_cpos;
1203         struct super_block *sb = inode->i_sb;
1204
1205         cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1206         clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1207
1208         while (clusters) {
1209                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1210                                          &extent_flags);
1211                 if (ret < 0) {
1212                         mlog_errno(ret);
1213                         goto out;
1214                 }
1215
1216                 if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) {
1217                         ret = 1;
1218                         break;
1219                 }
1220
1221                 if (extent_len > clusters)
1222                         extent_len = clusters;
1223
1224                 clusters -= extent_len;
1225                 cpos += extent_len;
1226         }
1227 out:
1228         return ret;
1229 }
1230
1231 static int ocfs2_write_remove_suid(struct inode *inode)
1232 {
1233         int ret;
1234         struct buffer_head *bh = NULL;
1235
1236         ret = ocfs2_read_inode_block(inode, &bh);
1237         if (ret < 0) {
1238                 mlog_errno(ret);
1239                 goto out;
1240         }
1241
1242         ret =  __ocfs2_write_remove_suid(inode, bh);
1243 out:
1244         brelse(bh);
1245         return ret;
1246 }
1247
1248 /*
1249  * Allocate enough extents to cover the region starting at byte offset
1250  * start for len bytes. Existing extents are skipped, any extents
1251  * added are marked as "unwritten".
1252  */
1253 static int ocfs2_allocate_unwritten_extents(struct inode *inode,
1254                                             u64 start, u64 len)
1255 {
1256         int ret;
1257         u32 cpos, phys_cpos, clusters, alloc_size;
1258         u64 end = start + len;
1259         struct buffer_head *di_bh = NULL;
1260
1261         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1262                 ret = ocfs2_read_inode_block(inode, &di_bh);
1263                 if (ret) {
1264                         mlog_errno(ret);
1265                         goto out;
1266                 }
1267
1268                 /*
1269                  * Nothing to do if the requested reservation range
1270                  * fits within the inode.
1271                  */
1272                 if (ocfs2_size_fits_inline_data(di_bh, end))
1273                         goto out;
1274
1275                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
1276                 if (ret) {
1277                         mlog_errno(ret);
1278                         goto out;
1279                 }
1280         }
1281
1282         /*
1283          * We consider both start and len to be inclusive.
1284          */
1285         cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1286         clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len);
1287         clusters -= cpos;
1288
1289         while (clusters) {
1290                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1291                                          &alloc_size, NULL);
1292                 if (ret) {
1293                         mlog_errno(ret);
1294                         goto out;
1295                 }
1296
1297                 /*
1298                  * Hole or existing extent len can be arbitrary, so
1299                  * cap it to our own allocation request.
1300                  */
1301                 if (alloc_size > clusters)
1302                         alloc_size = clusters;
1303
1304                 if (phys_cpos) {
1305                         /*
1306                          * We already have an allocation at this
1307                          * region so we can safely skip it.
1308                          */
1309                         goto next;
1310                 }
1311
1312                 ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1);
1313                 if (ret) {
1314                         if (ret != -ENOSPC)
1315                                 mlog_errno(ret);
1316                         goto out;
1317                 }
1318
1319 next:
1320                 cpos += alloc_size;
1321                 clusters -= alloc_size;
1322         }
1323
1324         ret = 0;
1325 out:
1326
1327         brelse(di_bh);
1328         return ret;
1329 }
1330
1331 /*
1332  * Truncate a byte range, avoiding pages within partial clusters. This
1333  * preserves those pages for the zeroing code to write to.
1334  */
1335 static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start,
1336                                          u64 byte_len)
1337 {
1338         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1339         loff_t start, end;
1340         struct address_space *mapping = inode->i_mapping;
1341
1342         start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start);
1343         end = byte_start + byte_len;
1344         end = end & ~(osb->s_clustersize - 1);
1345
1346         if (start < end) {
1347                 unmap_mapping_range(mapping, start, end - start, 0);
1348                 truncate_inode_pages_range(mapping, start, end - 1);
1349         }
1350 }
1351
1352 static int ocfs2_zero_partial_clusters(struct inode *inode,
1353                                        u64 start, u64 len)
1354 {
1355         int ret = 0;
1356         u64 tmpend, end = start + len;
1357         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1358         unsigned int csize = osb->s_clustersize;
1359         handle_t *handle;
1360
1361         /*
1362          * The "start" and "end" values are NOT necessarily part of
1363          * the range whose allocation is being deleted. Rather, this
1364          * is what the user passed in with the request. We must zero
1365          * partial clusters here. There's no need to worry about
1366          * physical allocation - the zeroing code knows to skip holes.
1367          */
1368         mlog(0, "byte start: %llu, end: %llu\n",
1369              (unsigned long long)start, (unsigned long long)end);
1370
1371         /*
1372          * If both edges are on a cluster boundary then there's no
1373          * zeroing required as the region is part of the allocation to
1374          * be truncated.
1375          */
1376         if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
1377                 goto out;
1378
1379         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1380         if (IS_ERR(handle)) {
1381                 ret = PTR_ERR(handle);
1382                 mlog_errno(ret);
1383                 goto out;
1384         }
1385
1386         /*
1387          * We want to get the byte offset of the end of the 1st cluster.
1388          */
1389         tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
1390         if (tmpend > end)
1391                 tmpend = end;
1392
1393         mlog(0, "1st range: start: %llu, tmpend: %llu\n",
1394              (unsigned long long)start, (unsigned long long)tmpend);
1395
1396         ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
1397         if (ret)
1398                 mlog_errno(ret);
1399
1400         if (tmpend < end) {
1401                 /*
1402                  * This may make start and end equal, but the zeroing
1403                  * code will skip any work in that case so there's no
1404                  * need to catch it up here.
1405                  */
1406                 start = end & ~(osb->s_clustersize - 1);
1407
1408                 mlog(0, "2nd range: start: %llu, end: %llu\n",
1409                      (unsigned long long)start, (unsigned long long)end);
1410
1411                 ret = ocfs2_zero_range_for_truncate(inode, handle, start, end);
1412                 if (ret)
1413                         mlog_errno(ret);
1414         }
1415
1416         ocfs2_commit_trans(osb, handle);
1417 out:
1418         return ret;
1419 }
1420
1421 static int ocfs2_remove_inode_range(struct inode *inode,
1422                                     struct buffer_head *di_bh, u64 byte_start,
1423                                     u64 byte_len)
1424 {
1425         int ret = 0;
1426         u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
1427         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1428         struct ocfs2_cached_dealloc_ctxt dealloc;
1429         struct address_space *mapping = inode->i_mapping;
1430         struct ocfs2_extent_tree et;
1431
1432         ocfs2_init_dinode_extent_tree(&et, INODE_CACHE(inode), di_bh);
1433         ocfs2_init_dealloc_ctxt(&dealloc);
1434
1435         if (byte_len == 0)
1436                 return 0;
1437
1438         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1439                 ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
1440                                             byte_start + byte_len, 0);
1441                 if (ret) {
1442                         mlog_errno(ret);
1443                         goto out;
1444                 }
1445                 /*
1446                  * There's no need to get fancy with the page cache
1447                  * truncate of an inline-data inode. We're talking
1448                  * about less than a page here, which will be cached
1449                  * in the dinode buffer anyway.
1450                  */
1451                 unmap_mapping_range(mapping, 0, 0, 0);
1452                 truncate_inode_pages(mapping, 0);
1453                 goto out;
1454         }
1455
1456         trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
1457         trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits;
1458         if (trunc_len >= trunc_start)
1459                 trunc_len -= trunc_start;
1460         else
1461                 trunc_len = 0;
1462
1463         mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n",
1464              (unsigned long long)OCFS2_I(inode)->ip_blkno,
1465              (unsigned long long)byte_start,
1466              (unsigned long long)byte_len, trunc_start, trunc_len);
1467
1468         ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len);
1469         if (ret) {
1470                 mlog_errno(ret);
1471                 goto out;
1472         }
1473
1474         cpos = trunc_start;
1475         while (trunc_len) {
1476                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1477                                          &alloc_size, NULL);
1478                 if (ret) {
1479                         mlog_errno(ret);
1480                         goto out;
1481                 }
1482
1483                 if (alloc_size > trunc_len)
1484                         alloc_size = trunc_len;
1485
1486                 /* Only do work for non-holes */
1487                 if (phys_cpos != 0) {
1488                         ret = ocfs2_remove_btree_range(inode, &et, cpos,
1489                                                        phys_cpos, alloc_size,
1490                                                        0, &dealloc, 0);
1491                         if (ret) {
1492                                 mlog_errno(ret);
1493                                 goto out;
1494                         }
1495                 }
1496
1497                 cpos += alloc_size;
1498                 trunc_len -= alloc_size;
1499         }
1500
1501         ocfs2_truncate_cluster_pages(inode, byte_start, byte_len);
1502
1503 out:
1504         ocfs2_schedule_truncate_log_flush(osb, 1);
1505         ocfs2_run_deallocs(osb, &dealloc);
1506
1507         return ret;
1508 }
1509
1510 /*
1511  * Parts of this function taken from xfs_change_file_space()
1512  */
1513 static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
1514                                      loff_t f_pos, unsigned int cmd,
1515                                      struct ocfs2_space_resv *sr,
1516                                      int change_size)
1517 {
1518         int ret;
1519         s64 llen;
1520         loff_t size;
1521         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1522         struct buffer_head *di_bh = NULL;
1523         handle_t *handle;
1524         unsigned long long max_off = inode->i_sb->s_maxbytes;
1525
1526         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
1527                 return -EROFS;
1528
1529         mutex_lock(&inode->i_mutex);
1530
1531         /*
1532          * This prevents concurrent writes on other nodes
1533          */
1534         ret = ocfs2_rw_lock(inode, 1);
1535         if (ret) {
1536                 mlog_errno(ret);
1537                 goto out;
1538         }
1539
1540         ret = ocfs2_inode_lock(inode, &di_bh, 1);
1541         if (ret) {
1542                 mlog_errno(ret);
1543                 goto out_rw_unlock;
1544         }
1545
1546         if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) {
1547                 ret = -EPERM;
1548                 goto out_inode_unlock;
1549         }
1550
1551         switch (sr->l_whence) {
1552         case 0: /*SEEK_SET*/
1553                 break;
1554         case 1: /*SEEK_CUR*/
1555                 sr->l_start += f_pos;
1556                 break;
1557         case 2: /*SEEK_END*/
1558                 sr->l_start += i_size_read(inode);
1559                 break;
1560         default:
1561                 ret = -EINVAL;
1562                 goto out_inode_unlock;
1563         }
1564         sr->l_whence = 0;
1565
1566         llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len;
1567
1568         if (sr->l_start < 0
1569             || sr->l_start > max_off
1570             || (sr->l_start + llen) < 0
1571             || (sr->l_start + llen) > max_off) {
1572                 ret = -EINVAL;
1573                 goto out_inode_unlock;
1574         }
1575         size = sr->l_start + sr->l_len;
1576
1577         if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) {
1578                 if (sr->l_len <= 0) {
1579                         ret = -EINVAL;
1580                         goto out_inode_unlock;
1581                 }
1582         }
1583
1584         if (file && should_remove_suid(file->f_path.dentry)) {
1585                 ret = __ocfs2_write_remove_suid(inode, di_bh);
1586                 if (ret) {
1587                         mlog_errno(ret);
1588                         goto out_inode_unlock;
1589                 }
1590         }
1591
1592         down_write(&OCFS2_I(inode)->ip_alloc_sem);
1593         switch (cmd) {
1594         case OCFS2_IOC_RESVSP:
1595         case OCFS2_IOC_RESVSP64:
1596                 /*
1597                  * This takes unsigned offsets, but the signed ones we
1598                  * pass have been checked against overflow above.
1599                  */
1600                 ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start,
1601                                                        sr->l_len);
1602                 break;
1603         case OCFS2_IOC_UNRESVSP:
1604         case OCFS2_IOC_UNRESVSP64:
1605                 ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start,
1606                                                sr->l_len);
1607                 break;
1608         default:
1609                 ret = -EINVAL;
1610         }
1611         up_write(&OCFS2_I(inode)->ip_alloc_sem);
1612         if (ret) {
1613                 mlog_errno(ret);
1614                 goto out_inode_unlock;
1615         }
1616
1617         /*
1618          * We update c/mtime for these changes
1619          */
1620         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1621         if (IS_ERR(handle)) {
1622                 ret = PTR_ERR(handle);
1623                 mlog_errno(ret);
1624                 goto out_inode_unlock;
1625         }
1626
1627         if (change_size && i_size_read(inode) < size)
1628                 i_size_write(inode, size);
1629
1630         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
1631         ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
1632         if (ret < 0)
1633                 mlog_errno(ret);
1634
1635         ocfs2_commit_trans(osb, handle);
1636
1637 out_inode_unlock:
1638         brelse(di_bh);
1639         ocfs2_inode_unlock(inode, 1);
1640 out_rw_unlock:
1641         ocfs2_rw_unlock(inode, 1);
1642
1643 out:
1644         mutex_unlock(&inode->i_mutex);
1645         return ret;
1646 }
1647
1648 int ocfs2_change_file_space(struct file *file, unsigned int cmd,
1649                             struct ocfs2_space_resv *sr)
1650 {
1651         struct inode *inode = file->f_path.dentry->d_inode;
1652         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1653
1654         if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) &&
1655             !ocfs2_writes_unwritten_extents(osb))
1656                 return -ENOTTY;
1657         else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) &&
1658                  !ocfs2_sparse_alloc(osb))
1659                 return -ENOTTY;
1660
1661         if (!S_ISREG(inode->i_mode))
1662                 return -EINVAL;
1663
1664         if (!(file->f_mode & FMODE_WRITE))
1665                 return -EBADF;
1666
1667         return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0);
1668 }
1669
1670 static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset,
1671                             loff_t len)
1672 {
1673         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1674         struct ocfs2_space_resv sr;
1675         int change_size = 1;
1676
1677         if (!ocfs2_writes_unwritten_extents(osb))
1678                 return -EOPNOTSUPP;
1679
1680         if (S_ISDIR(inode->i_mode))
1681                 return -ENODEV;
1682
1683         if (mode & FALLOC_FL_KEEP_SIZE)
1684                 change_size = 0;
1685
1686         sr.l_whence = 0;
1687         sr.l_start = (s64)offset;
1688         sr.l_len = (s64)len;
1689
1690         return __ocfs2_change_file_space(NULL, inode, offset,
1691                                          OCFS2_IOC_RESVSP64, &sr, change_size);
1692 }
1693
1694 int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos,
1695                                    size_t count)
1696 {
1697         int ret = 0;
1698         unsigned int extent_flags;
1699         u32 cpos, clusters, extent_len, phys_cpos;
1700         struct super_block *sb = inode->i_sb;
1701
1702         if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) ||
1703             !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) ||
1704             OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)
1705                 return 0;
1706
1707         cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1708         clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1709
1710         while (clusters) {
1711                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1712                                          &extent_flags);
1713                 if (ret < 0) {
1714                         mlog_errno(ret);
1715                         goto out;
1716                 }
1717
1718                 if (phys_cpos && (extent_flags & OCFS2_EXT_REFCOUNTED)) {
1719                         ret = 1;
1720                         break;
1721                 }
1722
1723                 if (extent_len > clusters)
1724                         extent_len = clusters;
1725
1726                 clusters -= extent_len;
1727                 cpos += extent_len;
1728         }
1729 out:
1730         return ret;
1731 }
1732
1733 static int ocfs2_prepare_inode_for_refcount(struct inode *inode,
1734                                             loff_t pos, size_t count,
1735                                             int *meta_level)
1736 {
1737         int ret;
1738         struct buffer_head *di_bh = NULL;
1739         u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1740         u32 clusters =
1741                 ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
1742
1743         ret = ocfs2_inode_lock(inode, &di_bh, 1);
1744         if (ret) {
1745                 mlog_errno(ret);
1746                 goto out;
1747         }
1748
1749         *meta_level = 1;
1750
1751         ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
1752         if (ret)
1753                 mlog_errno(ret);
1754 out:
1755         brelse(di_bh);
1756         return ret;
1757 }
1758
1759 static int ocfs2_prepare_inode_for_write(struct dentry *dentry,
1760                                          loff_t *ppos,
1761                                          size_t count,
1762                                          int appending,
1763                                          int *direct_io,
1764                                          int *has_refcount)
1765 {
1766         int ret = 0, meta_level = 0;
1767         struct inode *inode = dentry->d_inode;
1768         loff_t saved_pos, end;
1769
1770         /*
1771          * We start with a read level meta lock and only jump to an ex
1772          * if we need to make modifications here.
1773          */
1774         for(;;) {
1775                 ret = ocfs2_inode_lock(inode, NULL, meta_level);
1776                 if (ret < 0) {
1777                         meta_level = -1;
1778                         mlog_errno(ret);
1779                         goto out;
1780                 }
1781
1782                 /* Clear suid / sgid if necessary. We do this here
1783                  * instead of later in the write path because
1784                  * remove_suid() calls ->setattr without any hint that
1785                  * we may have already done our cluster locking. Since
1786                  * ocfs2_setattr() *must* take cluster locks to
1787                  * proceeed, this will lead us to recursively lock the
1788                  * inode. There's also the dinode i_size state which
1789                  * can be lost via setattr during extending writes (we
1790                  * set inode->i_size at the end of a write. */
1791                 if (should_remove_suid(dentry)) {
1792                         if (meta_level == 0) {
1793                                 ocfs2_inode_unlock(inode, meta_level);
1794                                 meta_level = 1;
1795                                 continue;
1796                         }
1797
1798                         ret = ocfs2_write_remove_suid(inode);
1799                         if (ret < 0) {
1800                                 mlog_errno(ret);
1801                                 goto out_unlock;
1802                         }
1803                 }
1804
1805                 /* work on a copy of ppos until we're sure that we won't have
1806                  * to recalculate it due to relocking. */
1807                 if (appending) {
1808                         saved_pos = i_size_read(inode);
1809                         mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos);
1810                 } else {
1811                         saved_pos = *ppos;
1812                 }
1813
1814                 end = saved_pos + count;
1815
1816                 ret = ocfs2_check_range_for_refcount(inode, saved_pos, count);
1817                 if (ret == 1) {
1818                         ocfs2_inode_unlock(inode, meta_level);
1819                         meta_level = -1;
1820
1821                         ret = ocfs2_prepare_inode_for_refcount(inode,
1822                                                                saved_pos,
1823                                                                count,
1824                                                                &meta_level);
1825                         if (has_refcount)
1826                                 *has_refcount = 1;
1827                         if (direct_io)
1828                                 *direct_io = 0;
1829                 }
1830
1831                 if (ret < 0) {
1832                         mlog_errno(ret);
1833                         goto out_unlock;
1834                 }
1835
1836                 /*
1837                  * Skip the O_DIRECT checks if we don't need
1838                  * them.
1839                  */
1840                 if (!direct_io || !(*direct_io))
1841                         break;
1842
1843                 /*
1844                  * There's no sane way to do direct writes to an inode
1845                  * with inline data.
1846                  */
1847                 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1848                         *direct_io = 0;
1849                         break;
1850                 }
1851
1852                 /*
1853                  * Allowing concurrent direct writes means
1854                  * i_size changes wouldn't be synchronized, so
1855                  * one node could wind up truncating another
1856                  * nodes writes.
1857                  */
1858                 if (end > i_size_read(inode)) {
1859                         *direct_io = 0;
1860                         break;
1861                 }
1862
1863                 /*
1864                  * We don't fill holes during direct io, so
1865                  * check for them here. If any are found, the
1866                  * caller will have to retake some cluster
1867                  * locks and initiate the io as buffered.
1868                  */
1869                 ret = ocfs2_check_range_for_holes(inode, saved_pos, count);
1870                 if (ret == 1) {
1871                         *direct_io = 0;
1872                         ret = 0;
1873                 } else if (ret < 0)
1874                         mlog_errno(ret);
1875                 break;
1876         }
1877
1878         if (appending)
1879                 *ppos = saved_pos;
1880
1881 out_unlock:
1882         if (meta_level >= 0)
1883                 ocfs2_inode_unlock(inode, meta_level);
1884
1885 out:
1886         return ret;
1887 }
1888
1889 static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
1890                                     const struct iovec *iov,
1891                                     unsigned long nr_segs,
1892                                     loff_t pos)
1893 {
1894         int ret, direct_io, appending, rw_level, have_alloc_sem  = 0;
1895         int can_do_direct, has_refcount = 0;
1896         ssize_t written = 0;
1897         size_t ocount;          /* original count */
1898         size_t count;           /* after file limit checks */
1899         loff_t old_size, *ppos = &iocb->ki_pos;
1900         u32 old_clusters;
1901         struct file *file = iocb->ki_filp;
1902         struct inode *inode = file->f_path.dentry->d_inode;
1903         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1904
1905         mlog_entry("(0x%p, %u, '%.*s')\n", file,
1906                    (unsigned int)nr_segs,
1907                    file->f_path.dentry->d_name.len,
1908                    file->f_path.dentry->d_name.name);
1909
1910         if (iocb->ki_left == 0)
1911                 return 0;
1912
1913         vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
1914
1915         appending = file->f_flags & O_APPEND ? 1 : 0;
1916         direct_io = file->f_flags & O_DIRECT ? 1 : 0;
1917
1918         mutex_lock(&inode->i_mutex);
1919
1920 relock:
1921         /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
1922         if (direct_io) {
1923                 down_read(&inode->i_alloc_sem);
1924                 have_alloc_sem = 1;
1925         }
1926
1927         /* concurrent O_DIRECT writes are allowed */
1928         rw_level = !direct_io;
1929         ret = ocfs2_rw_lock(inode, rw_level);
1930         if (ret < 0) {
1931                 mlog_errno(ret);
1932                 goto out_sems;
1933         }
1934
1935         can_do_direct = direct_io;
1936         ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
1937                                             iocb->ki_left, appending,
1938                                             &can_do_direct, &has_refcount);
1939         if (ret < 0) {
1940                 mlog_errno(ret);
1941                 goto out;
1942         }
1943
1944         /*
1945          * We can't complete the direct I/O as requested, fall back to
1946          * buffered I/O.
1947          */
1948         if (direct_io && !can_do_direct) {
1949                 ocfs2_rw_unlock(inode, rw_level);
1950                 up_read(&inode->i_alloc_sem);
1951
1952                 have_alloc_sem = 0;
1953                 rw_level = -1;
1954
1955                 direct_io = 0;
1956                 goto relock;
1957         }
1958
1959         /*
1960          * To later detect whether a journal commit for sync writes is
1961          * necessary, we sample i_size, and cluster count here.
1962          */
1963         old_size = i_size_read(inode);
1964         old_clusters = OCFS2_I(inode)->ip_clusters;
1965
1966         /* communicate with ocfs2_dio_end_io */
1967         ocfs2_iocb_set_rw_locked(iocb, rw_level);
1968
1969         if (direct_io) {
1970                 ret = generic_segment_checks(iov, &nr_segs, &ocount,
1971                                              VERIFY_READ);
1972                 if (ret)
1973                         goto out_dio;
1974
1975                 count = ocount;
1976                 ret = generic_write_checks(file, ppos, &count,
1977                                            S_ISBLK(inode->i_mode));
1978                 if (ret)
1979                         goto out_dio;
1980
1981                 written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
1982                                                     ppos, count, ocount);
1983                 if (written < 0) {
1984                         /*
1985                          * direct write may have instantiated a few
1986                          * blocks outside i_size. Trim these off again.
1987                          * Don't need i_size_read because we hold i_mutex.
1988                          */
1989                         if (*ppos + count > inode->i_size)
1990                                 vmtruncate(inode, inode->i_size);
1991                         ret = written;
1992                         goto out_dio;
1993                 }
1994         } else {
1995                 written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
1996         }
1997
1998 out_dio:
1999         /* buffered aio wouldn't have proper lock coverage today */
2000         BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
2001
2002         if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
2003             ((file->f_flags & O_DIRECT) && has_refcount)) {
2004                 ret = filemap_fdatawrite_range(file->f_mapping, pos,
2005                                                pos + count - 1);
2006                 if (ret < 0)
2007                         written = ret;
2008
2009                 if (!ret && (old_size != i_size_read(inode) ||
2010                     old_clusters != OCFS2_I(inode)->ip_clusters ||
2011                     has_refcount)) {
2012                         ret = jbd2_journal_force_commit(osb->journal->j_journal);
2013                         if (ret < 0)
2014                                 written = ret;
2015                 }
2016
2017                 if (!ret)
2018                         ret = filemap_fdatawait_range(file->f_mapping, pos,
2019                                                       pos + count - 1);
2020         }
2021
2022         /*
2023          * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
2024          * function pointer which is called when o_direct io completes so that
2025          * it can unlock our rw lock.  (it's the clustered equivalent of
2026          * i_alloc_sem; protects truncate from racing with pending ios).
2027          * Unfortunately there are error cases which call end_io and others
2028          * that don't.  so we don't have to unlock the rw_lock if either an
2029          * async dio is going to do it in the future or an end_io after an
2030          * error has already done it.
2031          */
2032         if ((ret == -EIOCBQUEUED) || (!ocfs2_iocb_is_rw_locked(iocb))) {
2033                 rw_level = -1;
2034                 have_alloc_sem = 0;
2035         }
2036
2037 out:
2038         if (rw_level != -1)
2039                 ocfs2_rw_unlock(inode, rw_level);
2040
2041 out_sems:
2042         if (have_alloc_sem)
2043                 up_read(&inode->i_alloc_sem);
2044
2045         mutex_unlock(&inode->i_mutex);
2046
2047         if (written)
2048                 ret = written;
2049         mlog_exit(ret);
2050         return ret;
2051 }
2052
2053 static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
2054                                 struct file *out,
2055                                 struct splice_desc *sd)
2056 {
2057         int ret;
2058
2059         ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
2060                                             sd->total_len, 0, NULL, NULL);
2061         if (ret < 0) {
2062                 mlog_errno(ret);
2063                 return ret;
2064         }
2065
2066         return splice_from_pipe_feed(pipe, sd, pipe_to_file);
2067 }
2068
2069 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
2070                                        struct file *out,
2071                                        loff_t *ppos,
2072                                        size_t len,
2073                                        unsigned int flags)
2074 {
2075         int ret;
2076         struct address_space *mapping = out->f_mapping;
2077         struct inode *inode = mapping->host;
2078         struct splice_desc sd = {
2079                 .total_len = len,
2080                 .flags = flags,
2081                 .pos = *ppos,
2082                 .u.file = out,
2083         };
2084
2085         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
2086                    (unsigned int)len,
2087                    out->f_path.dentry->d_name.len,
2088                    out->f_path.dentry->d_name.name);
2089
2090         if (pipe->inode)
2091                 mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
2092
2093         splice_from_pipe_begin(&sd);
2094         do {
2095                 ret = splice_from_pipe_next(pipe, &sd);
2096                 if (ret <= 0)
2097                         break;
2098
2099                 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
2100                 ret = ocfs2_rw_lock(inode, 1);
2101                 if (ret < 0)
2102                         mlog_errno(ret);
2103                 else {
2104                         ret = ocfs2_splice_to_file(pipe, out, &sd);
2105                         ocfs2_rw_unlock(inode, 1);
2106                 }
2107                 mutex_unlock(&inode->i_mutex);
2108         } while (ret > 0);
2109         splice_from_pipe_end(pipe, &sd);
2110
2111         if (pipe->inode)
2112                 mutex_unlock(&pipe->inode->i_mutex);
2113
2114         if (sd.num_spliced)
2115                 ret = sd.num_spliced;
2116
2117         if (ret > 0) {
2118                 unsigned long nr_pages;
2119                 int err;
2120
2121                 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
2122
2123                 err = generic_write_sync(out, *ppos, ret);
2124                 if (err)
2125                         ret = err;
2126                 else
2127                         *ppos += ret;
2128
2129                 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
2130         }
2131
2132         mlog_exit(ret);
2133         return ret;
2134 }
2135
2136 static ssize_t ocfs2_file_splice_read(struct file *in,
2137                                       loff_t *ppos,
2138                                       struct pipe_inode_info *pipe,
2139                                       size_t len,
2140                                       unsigned int flags)
2141 {
2142         int ret = 0, lock_level = 0;
2143         struct inode *inode = in->f_path.dentry->d_inode;
2144
2145         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
2146                    (unsigned int)len,
2147                    in->f_path.dentry->d_name.len,
2148                    in->f_path.dentry->d_name.name);
2149
2150         /*
2151          * See the comment in ocfs2_file_aio_read()
2152          */
2153         ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level);
2154         if (ret < 0) {
2155                 mlog_errno(ret);
2156                 goto bail;
2157         }
2158         ocfs2_inode_unlock(inode, lock_level);
2159
2160         ret = generic_file_splice_read(in, ppos, pipe, len, flags);
2161
2162 bail:
2163         mlog_exit(ret);
2164         return ret;
2165 }
2166
2167 static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
2168                                    const struct iovec *iov,
2169                                    unsigned long nr_segs,
2170                                    loff_t pos)
2171 {
2172         int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
2173         struct file *filp = iocb->ki_filp;
2174         struct inode *inode = filp->f_path.dentry->d_inode;
2175
2176         mlog_entry("(0x%p, %u, '%.*s')\n", filp,
2177                    (unsigned int)nr_segs,
2178                    filp->f_path.dentry->d_name.len,
2179                    filp->f_path.dentry->d_name.name);
2180
2181         if (!inode) {
2182                 ret = -EINVAL;
2183                 mlog_errno(ret);
2184                 goto bail;
2185         }
2186
2187         /*
2188          * buffered reads protect themselves in ->readpage().  O_DIRECT reads
2189          * need locks to protect pending reads from racing with truncate.
2190          */
2191         if (filp->f_flags & O_DIRECT) {
2192                 down_read(&inode->i_alloc_sem);
2193                 have_alloc_sem = 1;
2194
2195                 ret = ocfs2_rw_lock(inode, 0);
2196                 if (ret < 0) {
2197                         mlog_errno(ret);
2198                         goto bail;
2199                 }
2200                 rw_level = 0;
2201                 /* communicate with ocfs2_dio_end_io */
2202                 ocfs2_iocb_set_rw_locked(iocb, rw_level);
2203         }
2204
2205         /*
2206          * We're fine letting folks race truncates and extending
2207          * writes with read across the cluster, just like they can
2208          * locally. Hence no rw_lock during read.
2209          *
2210          * Take and drop the meta data lock to update inode fields
2211          * like i_size. This allows the checks down below
2212          * generic_file_aio_read() a chance of actually working.
2213          */
2214         ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
2215         if (ret < 0) {
2216                 mlog_errno(ret);
2217                 goto bail;
2218         }
2219         ocfs2_inode_unlock(inode, lock_level);
2220
2221         ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos);
2222         if (ret == -EINVAL)
2223                 mlog(0, "generic_file_aio_read returned -EINVAL\n");
2224
2225         /* buffered aio wouldn't have proper lock coverage today */
2226         BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
2227
2228         /* see ocfs2_file_aio_write */
2229         if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
2230                 rw_level = -1;
2231                 have_alloc_sem = 0;
2232         }
2233
2234 bail:
2235         if (have_alloc_sem)
2236                 up_read(&inode->i_alloc_sem);
2237         if (rw_level != -1)
2238                 ocfs2_rw_unlock(inode, rw_level);
2239         mlog_exit(ret);
2240
2241         return ret;
2242 }
2243
2244 const struct inode_operations ocfs2_file_iops = {
2245         .setattr        = ocfs2_setattr,
2246         .getattr        = ocfs2_getattr,
2247         .permission     = ocfs2_permission,
2248         .setxattr       = generic_setxattr,
2249         .getxattr       = generic_getxattr,
2250         .listxattr      = ocfs2_listxattr,
2251         .removexattr    = generic_removexattr,
2252         .fallocate      = ocfs2_fallocate,
2253         .fiemap         = ocfs2_fiemap,
2254 };
2255
2256 const struct inode_operations ocfs2_special_file_iops = {
2257         .setattr        = ocfs2_setattr,
2258         .getattr        = ocfs2_getattr,
2259         .permission     = ocfs2_permission,
2260 };
2261
2262 /*
2263  * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with
2264  * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks!
2265  */
2266 const struct file_operations ocfs2_fops = {
2267         .llseek         = generic_file_llseek,
2268         .read           = do_sync_read,
2269         .write          = do_sync_write,
2270         .mmap           = ocfs2_mmap,
2271         .fsync          = ocfs2_sync_file,
2272         .release        = ocfs2_file_release,
2273         .open           = ocfs2_file_open,
2274         .aio_read       = ocfs2_file_aio_read,
2275         .aio_write      = ocfs2_file_aio_write,
2276         .unlocked_ioctl = ocfs2_ioctl,
2277 #ifdef CONFIG_COMPAT
2278         .compat_ioctl   = ocfs2_compat_ioctl,
2279 #endif
2280         .lock           = ocfs2_lock,
2281         .flock          = ocfs2_flock,
2282         .splice_read    = ocfs2_file_splice_read,
2283         .splice_write   = ocfs2_file_splice_write,
2284 };
2285
2286 const struct file_operations ocfs2_dops = {
2287         .llseek         = generic_file_llseek,
2288         .read           = generic_read_dir,
2289         .readdir        = ocfs2_readdir,
2290         .fsync          = ocfs2_sync_file,
2291         .release        = ocfs2_dir_release,
2292         .open           = ocfs2_dir_open,
2293         .unlocked_ioctl = ocfs2_ioctl,
2294 #ifdef CONFIG_COMPAT
2295         .compat_ioctl   = ocfs2_compat_ioctl,
2296 #endif
2297         .lock           = ocfs2_lock,
2298         .flock          = ocfs2_flock,
2299 };
2300
2301 /*
2302  * POSIX-lockless variants of our file_operations.
2303  *
2304  * These will be used if the underlying cluster stack does not support
2305  * posix file locking, if the user passes the "localflocks" mount
2306  * option, or if we have a local-only fs.
2307  *
2308  * ocfs2_flock is in here because all stacks handle UNIX file locks,
2309  * so we still want it in the case of no stack support for
2310  * plocks. Internally, it will do the right thing when asked to ignore
2311  * the cluster.
2312  */
2313 const struct file_operations ocfs2_fops_no_plocks = {
2314         .llseek         = generic_file_llseek,
2315         .read           = do_sync_read,
2316         .write          = do_sync_write,
2317         .mmap           = ocfs2_mmap,
2318         .fsync          = ocfs2_sync_file,
2319         .release        = ocfs2_file_release,
2320         .open           = ocfs2_file_open,
2321         .aio_read       = ocfs2_file_aio_read,
2322         .aio_write      = ocfs2_file_aio_write,
2323         .unlocked_ioctl = ocfs2_ioctl,
2324 #ifdef CONFIG_COMPAT
2325         .compat_ioctl   = ocfs2_compat_ioctl,
2326 #endif
2327         .flock          = ocfs2_flock,
2328         .splice_read    = ocfs2_file_splice_read,
2329         .splice_write   = ocfs2_file_splice_write,
2330 };
2331
2332 const struct file_operations ocfs2_dops_no_plocks = {
2333         .llseek         = generic_file_llseek,
2334         .read           = generic_read_dir,
2335         .readdir        = ocfs2_readdir,
2336         .fsync          = ocfs2_sync_file,
2337         .release        = ocfs2_dir_release,
2338         .open           = ocfs2_dir_open,
2339         .unlocked_ioctl = ocfs2_ioctl,
2340 #ifdef CONFIG_COMPAT
2341         .compat_ioctl   = ocfs2_compat_ioctl,
2342 #endif
2343         .flock          = ocfs2_flock,
2344 };