ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.
[linux-2.6.git] / fs / ocfs2 / file.c
1 /* -*- mode: c; c-basic-offset: 8; -*-
2  * vim: noexpandtab sw=8 ts=8 sts=0:
3  *
4  * file.c
5  *
6  * File open, close, extend, truncate
7  *
8  * Copyright (C) 2002, 2004 Oracle.  All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public
12  * License as published by the Free Software Foundation; either
13  * version 2 of the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public
21  * License along with this program; if not, write to the
22  * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
23  * Boston, MA 021110-1307, USA.
24  */
25
26 #include <linux/capability.h>
27 #include <linux/fs.h>
28 #include <linux/types.h>
29 #include <linux/slab.h>
30 #include <linux/highmem.h>
31 #include <linux/pagemap.h>
32 #include <linux/uio.h>
33 #include <linux/sched.h>
34 #include <linux/splice.h>
35 #include <linux/mount.h>
36 #include <linux/writeback.h>
37 #include <linux/falloc.h>
38 #include <linux/quotaops.h>
39
40 #define MLOG_MASK_PREFIX ML_INODE
41 #include <cluster/masklog.h>
42
43 #include "ocfs2.h"
44
45 #include "alloc.h"
46 #include "aops.h"
47 #include "dir.h"
48 #include "dlmglue.h"
49 #include "extent_map.h"
50 #include "file.h"
51 #include "sysfile.h"
52 #include "inode.h"
53 #include "ioctl.h"
54 #include "journal.h"
55 #include "locks.h"
56 #include "mmap.h"
57 #include "suballoc.h"
58 #include "super.h"
59 #include "xattr.h"
60 #include "acl.h"
61 #include "quota.h"
62
63 #include "buffer_head_io.h"
64
65 static int ocfs2_sync_inode(struct inode *inode)
66 {
67         filemap_fdatawrite(inode->i_mapping);
68         return sync_mapping_buffers(inode->i_mapping);
69 }
70
71 static int ocfs2_init_file_private(struct inode *inode, struct file *file)
72 {
73         struct ocfs2_file_private *fp;
74
75         fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL);
76         if (!fp)
77                 return -ENOMEM;
78
79         fp->fp_file = file;
80         mutex_init(&fp->fp_mutex);
81         ocfs2_file_lock_res_init(&fp->fp_flock, fp);
82         file->private_data = fp;
83
84         return 0;
85 }
86
87 static void ocfs2_free_file_private(struct inode *inode, struct file *file)
88 {
89         struct ocfs2_file_private *fp = file->private_data;
90         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
91
92         if (fp) {
93                 ocfs2_simple_drop_lockres(osb, &fp->fp_flock);
94                 ocfs2_lock_res_free(&fp->fp_flock);
95                 kfree(fp);
96                 file->private_data = NULL;
97         }
98 }
99
100 static int ocfs2_file_open(struct inode *inode, struct file *file)
101 {
102         int status;
103         int mode = file->f_flags;
104         struct ocfs2_inode_info *oi = OCFS2_I(inode);
105
106         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
107                    file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
108
109         spin_lock(&oi->ip_lock);
110
111         /* Check that the inode hasn't been wiped from disk by another
112          * node. If it hasn't then we're safe as long as we hold the
113          * spin lock until our increment of open count. */
114         if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) {
115                 spin_unlock(&oi->ip_lock);
116
117                 status = -ENOENT;
118                 goto leave;
119         }
120
121         if (mode & O_DIRECT)
122                 oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT;
123
124         oi->ip_open_count++;
125         spin_unlock(&oi->ip_lock);
126
127         status = ocfs2_init_file_private(inode, file);
128         if (status) {
129                 /*
130                  * We want to set open count back if we're failing the
131                  * open.
132                  */
133                 spin_lock(&oi->ip_lock);
134                 oi->ip_open_count--;
135                 spin_unlock(&oi->ip_lock);
136         }
137
138 leave:
139         mlog_exit(status);
140         return status;
141 }
142
143 static int ocfs2_file_release(struct inode *inode, struct file *file)
144 {
145         struct ocfs2_inode_info *oi = OCFS2_I(inode);
146
147         mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
148                        file->f_path.dentry->d_name.len,
149                        file->f_path.dentry->d_name.name);
150
151         spin_lock(&oi->ip_lock);
152         if (!--oi->ip_open_count)
153                 oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT;
154         spin_unlock(&oi->ip_lock);
155
156         ocfs2_free_file_private(inode, file);
157
158         mlog_exit(0);
159
160         return 0;
161 }
162
163 static int ocfs2_dir_open(struct inode *inode, struct file *file)
164 {
165         return ocfs2_init_file_private(inode, file);
166 }
167
168 static int ocfs2_dir_release(struct inode *inode, struct file *file)
169 {
170         ocfs2_free_file_private(inode, file);
171         return 0;
172 }
173
174 static int ocfs2_sync_file(struct file *file,
175                            struct dentry *dentry,
176                            int datasync)
177 {
178         int err = 0;
179         journal_t *journal;
180         struct inode *inode = dentry->d_inode;
181         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
182
183         mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
184                    dentry->d_name.len, dentry->d_name.name);
185
186         err = ocfs2_sync_inode(dentry->d_inode);
187         if (err)
188                 goto bail;
189
190         journal = osb->journal->j_journal;
191         err = jbd2_journal_force_commit(journal);
192
193 bail:
194         mlog_exit(err);
195
196         return (err < 0) ? -EIO : 0;
197 }
198
199 int ocfs2_should_update_atime(struct inode *inode,
200                               struct vfsmount *vfsmnt)
201 {
202         struct timespec now;
203         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
204
205         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
206                 return 0;
207
208         if ((inode->i_flags & S_NOATIME) ||
209             ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
210                 return 0;
211
212         /*
213          * We can be called with no vfsmnt structure - NFSD will
214          * sometimes do this.
215          *
216          * Note that our action here is different than touch_atime() -
217          * if we can't tell whether this is a noatime mount, then we
218          * don't know whether to trust the value of s_atime_quantum.
219          */
220         if (vfsmnt == NULL)
221                 return 0;
222
223         if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
224             ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
225                 return 0;
226
227         if (vfsmnt->mnt_flags & MNT_RELATIME) {
228                 if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
229                     (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
230                         return 1;
231
232                 return 0;
233         }
234
235         now = CURRENT_TIME;
236         if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
237                 return 0;
238         else
239                 return 1;
240 }
241
242 int ocfs2_update_inode_atime(struct inode *inode,
243                              struct buffer_head *bh)
244 {
245         int ret;
246         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
247         handle_t *handle;
248         struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data;
249
250         mlog_entry_void();
251
252         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
253         if (IS_ERR(handle)) {
254                 ret = PTR_ERR(handle);
255                 mlog_errno(ret);
256                 goto out;
257         }
258
259         ret = ocfs2_journal_access_di(handle, inode, bh,
260                                       OCFS2_JOURNAL_ACCESS_WRITE);
261         if (ret) {
262                 mlog_errno(ret);
263                 goto out_commit;
264         }
265
266         /*
267          * Don't use ocfs2_mark_inode_dirty() here as we don't always
268          * have i_mutex to guard against concurrent changes to other
269          * inode fields.
270          */
271         inode->i_atime = CURRENT_TIME;
272         di->i_atime = cpu_to_le64(inode->i_atime.tv_sec);
273         di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
274
275         ret = ocfs2_journal_dirty(handle, bh);
276         if (ret < 0)
277                 mlog_errno(ret);
278
279 out_commit:
280         ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
281 out:
282         mlog_exit(ret);
283         return ret;
284 }
285
286 static int ocfs2_set_inode_size(handle_t *handle,
287                                 struct inode *inode,
288                                 struct buffer_head *fe_bh,
289                                 u64 new_i_size)
290 {
291         int status;
292
293         mlog_entry_void();
294         i_size_write(inode, new_i_size);
295         inode->i_blocks = ocfs2_inode_sector_count(inode);
296         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
297
298         status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
299         if (status < 0) {
300                 mlog_errno(status);
301                 goto bail;
302         }
303
304 bail:
305         mlog_exit(status);
306         return status;
307 }
308
309 int ocfs2_simple_size_update(struct inode *inode,
310                              struct buffer_head *di_bh,
311                              u64 new_i_size)
312 {
313         int ret;
314         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
315         handle_t *handle = NULL;
316
317         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
318         if (IS_ERR(handle)) {
319                 ret = PTR_ERR(handle);
320                 mlog_errno(ret);
321                 goto out;
322         }
323
324         ret = ocfs2_set_inode_size(handle, inode, di_bh,
325                                    new_i_size);
326         if (ret < 0)
327                 mlog_errno(ret);
328
329         ocfs2_commit_trans(osb, handle);
330 out:
331         return ret;
332 }
333
334 static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb,
335                                      struct inode *inode,
336                                      struct buffer_head *fe_bh,
337                                      u64 new_i_size)
338 {
339         int status;
340         handle_t *handle;
341         struct ocfs2_dinode *di;
342         u64 cluster_bytes;
343
344         mlog_entry_void();
345
346         /* TODO: This needs to actually orphan the inode in this
347          * transaction. */
348
349         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
350         if (IS_ERR(handle)) {
351                 status = PTR_ERR(handle);
352                 mlog_errno(status);
353                 goto out;
354         }
355
356         status = ocfs2_journal_access_di(handle, inode, fe_bh,
357                                          OCFS2_JOURNAL_ACCESS_WRITE);
358         if (status < 0) {
359                 mlog_errno(status);
360                 goto out_commit;
361         }
362
363         /*
364          * Do this before setting i_size.
365          */
366         cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size);
367         status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size,
368                                                cluster_bytes);
369         if (status) {
370                 mlog_errno(status);
371                 goto out_commit;
372         }
373
374         i_size_write(inode, new_i_size);
375         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
376
377         di = (struct ocfs2_dinode *) fe_bh->b_data;
378         di->i_size = cpu_to_le64(new_i_size);
379         di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec);
380         di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
381
382         status = ocfs2_journal_dirty(handle, fe_bh);
383         if (status < 0)
384                 mlog_errno(status);
385
386 out_commit:
387         ocfs2_commit_trans(osb, handle);
388 out:
389
390         mlog_exit(status);
391         return status;
392 }
393
394 static int ocfs2_truncate_file(struct inode *inode,
395                                struct buffer_head *di_bh,
396                                u64 new_i_size)
397 {
398         int status = 0;
399         struct ocfs2_dinode *fe = NULL;
400         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
401         struct ocfs2_truncate_context *tc = NULL;
402
403         mlog_entry("(inode = %llu, new_i_size = %llu\n",
404                    (unsigned long long)OCFS2_I(inode)->ip_blkno,
405                    (unsigned long long)new_i_size);
406
407         /* We trust di_bh because it comes from ocfs2_inode_lock(), which
408          * already validated it */
409         fe = (struct ocfs2_dinode *) di_bh->b_data;
410
411         mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode),
412                         "Inode %llu, inode i_size = %lld != di "
413                         "i_size = %llu, i_flags = 0x%x\n",
414                         (unsigned long long)OCFS2_I(inode)->ip_blkno,
415                         i_size_read(inode),
416                         (unsigned long long)le64_to_cpu(fe->i_size),
417                         le32_to_cpu(fe->i_flags));
418
419         if (new_i_size > le64_to_cpu(fe->i_size)) {
420                 mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n",
421                      (unsigned long long)le64_to_cpu(fe->i_size),
422                      (unsigned long long)new_i_size);
423                 status = -EINVAL;
424                 mlog_errno(status);
425                 goto bail;
426         }
427
428         mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n",
429              (unsigned long long)le64_to_cpu(fe->i_blkno),
430              (unsigned long long)le64_to_cpu(fe->i_size),
431              (unsigned long long)new_i_size);
432
433         /* lets handle the simple truncate cases before doing any more
434          * cluster locking. */
435         if (new_i_size == le64_to_cpu(fe->i_size))
436                 goto bail;
437
438         down_write(&OCFS2_I(inode)->ip_alloc_sem);
439
440         /*
441          * The inode lock forced other nodes to sync and drop their
442          * pages, which (correctly) happens even if we have a truncate
443          * without allocation change - ocfs2 cluster sizes can be much
444          * greater than page size, so we have to truncate them
445          * anyway.
446          */
447         unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
448         truncate_inode_pages(inode->i_mapping, new_i_size);
449
450         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
451                 status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
452                                                i_size_read(inode), 1);
453                 if (status)
454                         mlog_errno(status);
455
456                 goto bail_unlock_sem;
457         }
458
459         /* alright, we're going to need to do a full blown alloc size
460          * change. Orphan the inode so that recovery can complete the
461          * truncate if necessary. This does the task of marking
462          * i_size. */
463         status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size);
464         if (status < 0) {
465                 mlog_errno(status);
466                 goto bail_unlock_sem;
467         }
468
469         status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc);
470         if (status < 0) {
471                 mlog_errno(status);
472                 goto bail_unlock_sem;
473         }
474
475         status = ocfs2_commit_truncate(osb, inode, di_bh, tc);
476         if (status < 0) {
477                 mlog_errno(status);
478                 goto bail_unlock_sem;
479         }
480
481         /* TODO: orphan dir cleanup here. */
482 bail_unlock_sem:
483         up_write(&OCFS2_I(inode)->ip_alloc_sem);
484
485 bail:
486
487         mlog_exit(status);
488         return status;
489 }
490
491 /*
492  * extend file allocation only here.
493  * we'll update all the disk stuff, and oip->alloc_size
494  *
495  * expect stuff to be locked, a transaction started and enough data /
496  * metadata reservations in the contexts.
497  *
498  * Will return -EAGAIN, and a reason if a restart is needed.
499  * If passed in, *reason will always be set, even in error.
500  */
501 int ocfs2_add_inode_data(struct ocfs2_super *osb,
502                          struct inode *inode,
503                          u32 *logical_offset,
504                          u32 clusters_to_add,
505                          int mark_unwritten,
506                          struct buffer_head *fe_bh,
507                          handle_t *handle,
508                          struct ocfs2_alloc_context *data_ac,
509                          struct ocfs2_alloc_context *meta_ac,
510                          enum ocfs2_alloc_restarted *reason_ret)
511 {
512         int ret;
513         struct ocfs2_extent_tree et;
514
515         ocfs2_init_dinode_extent_tree(&et, inode, fe_bh);
516         ret = ocfs2_add_clusters_in_btree(osb, inode, logical_offset,
517                                            clusters_to_add, mark_unwritten,
518                                            &et, handle,
519                                            data_ac, meta_ac, reason_ret);
520
521         return ret;
522 }
523
524 static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
525                                      u32 clusters_to_add, int mark_unwritten)
526 {
527         int status = 0;
528         int restart_func = 0;
529         int credits;
530         u32 prev_clusters;
531         struct buffer_head *bh = NULL;
532         struct ocfs2_dinode *fe = NULL;
533         handle_t *handle = NULL;
534         struct ocfs2_alloc_context *data_ac = NULL;
535         struct ocfs2_alloc_context *meta_ac = NULL;
536         enum ocfs2_alloc_restarted why;
537         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
538         struct ocfs2_extent_tree et;
539         int did_quota = 0;
540
541         mlog_entry("(clusters_to_add = %u)\n", clusters_to_add);
542
543         /*
544          * This function only exists for file systems which don't
545          * support holes.
546          */
547         BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb));
548
549         status = ocfs2_read_inode_block(inode, &bh);
550         if (status < 0) {
551                 mlog_errno(status);
552                 goto leave;
553         }
554         fe = (struct ocfs2_dinode *) bh->b_data;
555
556 restart_all:
557         BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters);
558
559         mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, "
560              "clusters_to_add = %u\n",
561              (unsigned long long)OCFS2_I(inode)->ip_blkno,
562              (long long)i_size_read(inode), le32_to_cpu(fe->i_clusters),
563              clusters_to_add);
564         ocfs2_init_dinode_extent_tree(&et, inode, bh);
565         status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0,
566                                        &data_ac, &meta_ac);
567         if (status) {
568                 mlog_errno(status);
569                 goto leave;
570         }
571
572         credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list,
573                                             clusters_to_add);
574         handle = ocfs2_start_trans(osb, credits);
575         if (IS_ERR(handle)) {
576                 status = PTR_ERR(handle);
577                 handle = NULL;
578                 mlog_errno(status);
579                 goto leave;
580         }
581
582 restarted_transaction:
583         if (vfs_dq_alloc_space_nodirty(inode, ocfs2_clusters_to_bytes(osb->sb,
584             clusters_to_add))) {
585                 status = -EDQUOT;
586                 goto leave;
587         }
588         did_quota = 1;
589
590         /* reserve a write to the file entry early on - that we if we
591          * run out of credits in the allocation path, we can still
592          * update i_size. */
593         status = ocfs2_journal_access_di(handle, inode, bh,
594                                          OCFS2_JOURNAL_ACCESS_WRITE);
595         if (status < 0) {
596                 mlog_errno(status);
597                 goto leave;
598         }
599
600         prev_clusters = OCFS2_I(inode)->ip_clusters;
601
602         status = ocfs2_add_inode_data(osb,
603                                       inode,
604                                       &logical_start,
605                                       clusters_to_add,
606                                       mark_unwritten,
607                                       bh,
608                                       handle,
609                                       data_ac,
610                                       meta_ac,
611                                       &why);
612         if ((status < 0) && (status != -EAGAIN)) {
613                 if (status != -ENOSPC)
614                         mlog_errno(status);
615                 goto leave;
616         }
617
618         status = ocfs2_journal_dirty(handle, bh);
619         if (status < 0) {
620                 mlog_errno(status);
621                 goto leave;
622         }
623
624         spin_lock(&OCFS2_I(inode)->ip_lock);
625         clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters);
626         spin_unlock(&OCFS2_I(inode)->ip_lock);
627         /* Release unused quota reservation */
628         vfs_dq_free_space(inode,
629                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
630         did_quota = 0;
631
632         if (why != RESTART_NONE && clusters_to_add) {
633                 if (why == RESTART_META) {
634                         mlog(0, "restarting function.\n");
635                         restart_func = 1;
636                 } else {
637                         BUG_ON(why != RESTART_TRANS);
638
639                         mlog(0, "restarting transaction.\n");
640                         /* TODO: This can be more intelligent. */
641                         credits = ocfs2_calc_extend_credits(osb->sb,
642                                                             &fe->id2.i_list,
643                                                             clusters_to_add);
644                         status = ocfs2_extend_trans(handle, credits);
645                         if (status < 0) {
646                                 /* handle still has to be committed at
647                                  * this point. */
648                                 status = -ENOMEM;
649                                 mlog_errno(status);
650                                 goto leave;
651                         }
652                         goto restarted_transaction;
653                 }
654         }
655
656         mlog(0, "fe: i_clusters = %u, i_size=%llu\n",
657              le32_to_cpu(fe->i_clusters),
658              (unsigned long long)le64_to_cpu(fe->i_size));
659         mlog(0, "inode: ip_clusters=%u, i_size=%lld\n",
660              OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode));
661
662 leave:
663         if (status < 0 && did_quota)
664                 vfs_dq_free_space(inode,
665                         ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
666         if (handle) {
667                 ocfs2_commit_trans(osb, handle);
668                 handle = NULL;
669         }
670         if (data_ac) {
671                 ocfs2_free_alloc_context(data_ac);
672                 data_ac = NULL;
673         }
674         if (meta_ac) {
675                 ocfs2_free_alloc_context(meta_ac);
676                 meta_ac = NULL;
677         }
678         if ((!status) && restart_func) {
679                 restart_func = 0;
680                 goto restart_all;
681         }
682         brelse(bh);
683         bh = NULL;
684
685         mlog_exit(status);
686         return status;
687 }
688
689 /* Some parts of this taken from generic_cont_expand, which turned out
690  * to be too fragile to do exactly what we need without us having to
691  * worry about recursive locking in ->write_begin() and ->write_end(). */
692 static int ocfs2_write_zero_page(struct inode *inode,
693                                  u64 size)
694 {
695         struct address_space *mapping = inode->i_mapping;
696         struct page *page;
697         unsigned long index;
698         unsigned int offset;
699         handle_t *handle = NULL;
700         int ret;
701
702         offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
703         /* ugh.  in prepare/commit_write, if from==to==start of block, we 
704         ** skip the prepare.  make sure we never send an offset for the start
705         ** of a block
706         */
707         if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
708                 offset++;
709         }
710         index = size >> PAGE_CACHE_SHIFT;
711
712         page = grab_cache_page(mapping, index);
713         if (!page) {
714                 ret = -ENOMEM;
715                 mlog_errno(ret);
716                 goto out;
717         }
718
719         ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
720         if (ret < 0) {
721                 mlog_errno(ret);
722                 goto out_unlock;
723         }
724
725         if (ocfs2_should_order_data(inode)) {
726                 handle = ocfs2_start_walk_page_trans(inode, page, offset,
727                                                      offset);
728                 if (IS_ERR(handle)) {
729                         ret = PTR_ERR(handle);
730                         handle = NULL;
731                         goto out_unlock;
732                 }
733         }
734
735         /* must not update i_size! */
736         ret = block_commit_write(page, offset, offset);
737         if (ret < 0)
738                 mlog_errno(ret);
739         else
740                 ret = 0;
741
742         if (handle)
743                 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
744 out_unlock:
745         unlock_page(page);
746         page_cache_release(page);
747 out:
748         return ret;
749 }
750
751 static int ocfs2_zero_extend(struct inode *inode,
752                              u64 zero_to_size)
753 {
754         int ret = 0;
755         u64 start_off;
756         struct super_block *sb = inode->i_sb;
757
758         start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
759         while (start_off < zero_to_size) {
760                 ret = ocfs2_write_zero_page(inode, start_off);
761                 if (ret < 0) {
762                         mlog_errno(ret);
763                         goto out;
764                 }
765
766                 start_off += sb->s_blocksize;
767
768                 /*
769                  * Very large extends have the potential to lock up
770                  * the cpu for extended periods of time.
771                  */
772                 cond_resched();
773         }
774
775 out:
776         return ret;
777 }
778
779 int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
780 {
781         int ret;
782         u32 clusters_to_add;
783         struct ocfs2_inode_info *oi = OCFS2_I(inode);
784
785         clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
786         if (clusters_to_add < oi->ip_clusters)
787                 clusters_to_add = 0;
788         else
789                 clusters_to_add -= oi->ip_clusters;
790
791         if (clusters_to_add) {
792                 ret = __ocfs2_extend_allocation(inode, oi->ip_clusters,
793                                                 clusters_to_add, 0);
794                 if (ret) {
795                         mlog_errno(ret);
796                         goto out;
797                 }
798         }
799
800         /*
801          * Call this even if we don't add any clusters to the tree. We
802          * still need to zero the area between the old i_size and the
803          * new i_size.
804          */
805         ret = ocfs2_zero_extend(inode, zero_to);
806         if (ret < 0)
807                 mlog_errno(ret);
808
809 out:
810         return ret;
811 }
812
813 static int ocfs2_extend_file(struct inode *inode,
814                              struct buffer_head *di_bh,
815                              u64 new_i_size)
816 {
817         int ret = 0;
818         struct ocfs2_inode_info *oi = OCFS2_I(inode);
819
820         BUG_ON(!di_bh);
821
822         /* setattr sometimes calls us like this. */
823         if (new_i_size == 0)
824                 goto out;
825
826         if (i_size_read(inode) == new_i_size)
827                 goto out;
828         BUG_ON(new_i_size < i_size_read(inode));
829
830         /*
831          * Fall through for converting inline data, even if the fs
832          * supports sparse files.
833          *
834          * The check for inline data here is legal - nobody can add
835          * the feature since we have i_mutex. We must check it again
836          * after acquiring ip_alloc_sem though, as paths like mmap
837          * might have raced us to converting the inode to extents.
838          */
839         if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
840             && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
841                 goto out_update_size;
842
843         /*
844          * The alloc sem blocks people in read/write from reading our
845          * allocation until we're done changing it. We depend on
846          * i_mutex to block other extend/truncate calls while we're
847          * here.
848          */
849         down_write(&oi->ip_alloc_sem);
850
851         if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
852                 /*
853                  * We can optimize small extends by keeping the inodes
854                  * inline data.
855                  */
856                 if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) {
857                         up_write(&oi->ip_alloc_sem);
858                         goto out_update_size;
859                 }
860
861                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
862                 if (ret) {
863                         up_write(&oi->ip_alloc_sem);
864
865                         mlog_errno(ret);
866                         goto out;
867                 }
868         }
869
870         if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
871                 ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
872
873         up_write(&oi->ip_alloc_sem);
874
875         if (ret < 0) {
876                 mlog_errno(ret);
877                 goto out;
878         }
879
880 out_update_size:
881         ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
882         if (ret < 0)
883                 mlog_errno(ret);
884
885 out:
886         return ret;
887 }
888
889 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
890 {
891         int status = 0, size_change;
892         struct inode *inode = dentry->d_inode;
893         struct super_block *sb = inode->i_sb;
894         struct ocfs2_super *osb = OCFS2_SB(sb);
895         struct buffer_head *bh = NULL;
896         handle_t *handle = NULL;
897         int locked[MAXQUOTAS] = {0, 0};
898         int credits, qtype;
899         struct ocfs2_mem_dqinfo *oinfo;
900
901         mlog_entry("(0x%p, '%.*s')\n", dentry,
902                    dentry->d_name.len, dentry->d_name.name);
903
904         /* ensuring we don't even attempt to truncate a symlink */
905         if (S_ISLNK(inode->i_mode))
906                 attr->ia_valid &= ~ATTR_SIZE;
907
908         if (attr->ia_valid & ATTR_MODE)
909                 mlog(0, "mode change: %d\n", attr->ia_mode);
910         if (attr->ia_valid & ATTR_UID)
911                 mlog(0, "uid change: %d\n", attr->ia_uid);
912         if (attr->ia_valid & ATTR_GID)
913                 mlog(0, "gid change: %d\n", attr->ia_gid);
914         if (attr->ia_valid & ATTR_SIZE)
915                 mlog(0, "size change...\n");
916         if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME))
917                 mlog(0, "time change...\n");
918
919 #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \
920                            | ATTR_GID | ATTR_UID | ATTR_MODE)
921         if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) {
922                 mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid);
923                 return 0;
924         }
925
926         status = inode_change_ok(inode, attr);
927         if (status)
928                 return status;
929
930         size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
931         if (size_change) {
932                 status = ocfs2_rw_lock(inode, 1);
933                 if (status < 0) {
934                         mlog_errno(status);
935                         goto bail;
936                 }
937         }
938
939         status = ocfs2_inode_lock(inode, &bh, 1);
940         if (status < 0) {
941                 if (status != -ENOENT)
942                         mlog_errno(status);
943                 goto bail_unlock_rw;
944         }
945
946         if (size_change && attr->ia_size != i_size_read(inode)) {
947                 if (attr->ia_size > sb->s_maxbytes) {
948                         status = -EFBIG;
949                         goto bail_unlock;
950                 }
951
952                 if (i_size_read(inode) > attr->ia_size) {
953                         if (ocfs2_should_order_data(inode)) {
954                                 status = ocfs2_begin_ordered_truncate(inode,
955                                                                       attr->ia_size);
956                                 if (status)
957                                         goto bail_unlock;
958                         }
959                         status = ocfs2_truncate_file(inode, bh, attr->ia_size);
960                 } else
961                         status = ocfs2_extend_file(inode, bh, attr->ia_size);
962                 if (status < 0) {
963                         if (status != -ENOSPC)
964                                 mlog_errno(status);
965                         status = -ENOSPC;
966                         goto bail_unlock;
967                 }
968         }
969
970         if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
971             (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
972                 credits = OCFS2_INODE_UPDATE_CREDITS;
973                 if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
974                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
975                     OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
976                         oinfo = sb_dqinfo(sb, USRQUOTA)->dqi_priv;
977                         status = ocfs2_lock_global_qf(oinfo, 1);
978                         if (status < 0)
979                                 goto bail_unlock;
980                         credits += ocfs2_calc_qinit_credits(sb, USRQUOTA) +
981                                 ocfs2_calc_qdel_credits(sb, USRQUOTA);
982                         locked[USRQUOTA] = 1;
983                 }
984                 if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
985                     && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
986                     OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
987                         oinfo = sb_dqinfo(sb, GRPQUOTA)->dqi_priv;
988                         status = ocfs2_lock_global_qf(oinfo, 1);
989                         if (status < 0)
990                                 goto bail_unlock;
991                         credits += ocfs2_calc_qinit_credits(sb, GRPQUOTA) +
992                                    ocfs2_calc_qdel_credits(sb, GRPQUOTA);
993                         locked[GRPQUOTA] = 1;
994                 }
995                 handle = ocfs2_start_trans(osb, credits);
996                 if (IS_ERR(handle)) {
997                         status = PTR_ERR(handle);
998                         mlog_errno(status);
999                         goto bail_unlock;
1000                 }
1001                 status = vfs_dq_transfer(inode, attr) ? -EDQUOT : 0;
1002                 if (status < 0)
1003                         goto bail_commit;
1004         } else {
1005                 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1006                 if (IS_ERR(handle)) {
1007                         status = PTR_ERR(handle);
1008                         mlog_errno(status);
1009                         goto bail_unlock;
1010                 }
1011         }
1012
1013         /*
1014          * This will intentionally not wind up calling vmtruncate(),
1015          * since all the work for a size change has been done above.
1016          * Otherwise, we could get into problems with truncate as
1017          * ip_alloc_sem is used there to protect against i_size
1018          * changes.
1019          */
1020         status = inode_setattr(inode, attr);
1021         if (status < 0) {
1022                 mlog_errno(status);
1023                 goto bail_commit;
1024         }
1025
1026         status = ocfs2_mark_inode_dirty(handle, inode, bh);
1027         if (status < 0)
1028                 mlog_errno(status);
1029
1030 bail_commit:
1031         ocfs2_commit_trans(osb, handle);
1032 bail_unlock:
1033         for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
1034                 if (!locked[qtype])
1035                         continue;
1036                 oinfo = sb_dqinfo(sb, qtype)->dqi_priv;
1037                 ocfs2_unlock_global_qf(oinfo, 1);
1038         }
1039         ocfs2_inode_unlock(inode, 1);
1040 bail_unlock_rw:
1041         if (size_change)
1042                 ocfs2_rw_unlock(inode, 1);
1043 bail:
1044         brelse(bh);
1045
1046         if (!status && attr->ia_valid & ATTR_MODE) {
1047                 status = ocfs2_acl_chmod(inode);
1048                 if (status < 0)
1049                         mlog_errno(status);
1050         }
1051
1052         mlog_exit(status);
1053         return status;
1054 }
1055
1056 int ocfs2_getattr(struct vfsmount *mnt,
1057                   struct dentry *dentry,
1058                   struct kstat *stat)
1059 {
1060         struct inode *inode = dentry->d_inode;
1061         struct super_block *sb = dentry->d_inode->i_sb;
1062         struct ocfs2_super *osb = sb->s_fs_info;
1063         int err;
1064
1065         mlog_entry_void();
1066
1067         err = ocfs2_inode_revalidate(dentry);
1068         if (err) {
1069                 if (err != -ENOENT)
1070                         mlog_errno(err);
1071                 goto bail;
1072         }
1073
1074         generic_fillattr(inode, stat);
1075
1076         /* We set the blksize from the cluster size for performance */
1077         stat->blksize = osb->s_clustersize;
1078
1079 bail:
1080         mlog_exit(err);
1081
1082         return err;
1083 }
1084
1085 int ocfs2_permission(struct inode *inode, int mask)
1086 {
1087         int ret;
1088
1089         mlog_entry_void();
1090
1091         ret = ocfs2_inode_lock(inode, NULL, 0);
1092         if (ret) {
1093                 if (ret != -ENOENT)
1094                         mlog_errno(ret);
1095                 goto out;
1096         }
1097
1098         ret = generic_permission(inode, mask, ocfs2_check_acl);
1099
1100         ocfs2_inode_unlock(inode, 0);
1101 out:
1102         mlog_exit(ret);
1103         return ret;
1104 }
1105
1106 static int __ocfs2_write_remove_suid(struct inode *inode,
1107                                      struct buffer_head *bh)
1108 {
1109         int ret;
1110         handle_t *handle;
1111         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1112         struct ocfs2_dinode *di;
1113
1114         mlog_entry("(Inode %llu, mode 0%o)\n",
1115                    (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode);
1116
1117         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1118         if (IS_ERR(handle)) {
1119                 ret = PTR_ERR(handle);
1120                 mlog_errno(ret);
1121                 goto out;
1122         }
1123
1124         ret = ocfs2_journal_access_di(handle, inode, bh,
1125                                       OCFS2_JOURNAL_ACCESS_WRITE);
1126         if (ret < 0) {
1127                 mlog_errno(ret);
1128                 goto out_trans;
1129         }
1130
1131         inode->i_mode &= ~S_ISUID;
1132         if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP))
1133                 inode->i_mode &= ~S_ISGID;
1134
1135         di = (struct ocfs2_dinode *) bh->b_data;
1136         di->i_mode = cpu_to_le16(inode->i_mode);
1137
1138         ret = ocfs2_journal_dirty(handle, bh);
1139         if (ret < 0)
1140                 mlog_errno(ret);
1141
1142 out_trans:
1143         ocfs2_commit_trans(osb, handle);
1144 out:
1145         mlog_exit(ret);
1146         return ret;
1147 }
1148
1149 /*
1150  * Will look for holes and unwritten extents in the range starting at
1151  * pos for count bytes (inclusive).
1152  */
1153 static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos,
1154                                        size_t count)
1155 {
1156         int ret = 0;
1157         unsigned int extent_flags;
1158         u32 cpos, clusters, extent_len, phys_cpos;
1159         struct super_block *sb = inode->i_sb;
1160
1161         cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1162         clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1163
1164         while (clusters) {
1165                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1166                                          &extent_flags);
1167                 if (ret < 0) {
1168                         mlog_errno(ret);
1169                         goto out;
1170                 }
1171
1172                 if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) {
1173                         ret = 1;
1174                         break;
1175                 }
1176
1177                 if (extent_len > clusters)
1178                         extent_len = clusters;
1179
1180                 clusters -= extent_len;
1181                 cpos += extent_len;
1182         }
1183 out:
1184         return ret;
1185 }
1186
1187 static int ocfs2_write_remove_suid(struct inode *inode)
1188 {
1189         int ret;
1190         struct buffer_head *bh = NULL;
1191
1192         ret = ocfs2_read_inode_block(inode, &bh);
1193         if (ret < 0) {
1194                 mlog_errno(ret);
1195                 goto out;
1196         }
1197
1198         ret =  __ocfs2_write_remove_suid(inode, bh);
1199 out:
1200         brelse(bh);
1201         return ret;
1202 }
1203
1204 /*
1205  * Allocate enough extents to cover the region starting at byte offset
1206  * start for len bytes. Existing extents are skipped, any extents
1207  * added are marked as "unwritten".
1208  */
1209 static int ocfs2_allocate_unwritten_extents(struct inode *inode,
1210                                             u64 start, u64 len)
1211 {
1212         int ret;
1213         u32 cpos, phys_cpos, clusters, alloc_size;
1214         u64 end = start + len;
1215         struct buffer_head *di_bh = NULL;
1216
1217         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1218                 ret = ocfs2_read_inode_block(inode, &di_bh);
1219                 if (ret) {
1220                         mlog_errno(ret);
1221                         goto out;
1222                 }
1223
1224                 /*
1225                  * Nothing to do if the requested reservation range
1226                  * fits within the inode.
1227                  */
1228                 if (ocfs2_size_fits_inline_data(di_bh, end))
1229                         goto out;
1230
1231                 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
1232                 if (ret) {
1233                         mlog_errno(ret);
1234                         goto out;
1235                 }
1236         }
1237
1238         /*
1239          * We consider both start and len to be inclusive.
1240          */
1241         cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1242         clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len);
1243         clusters -= cpos;
1244
1245         while (clusters) {
1246                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1247                                          &alloc_size, NULL);
1248                 if (ret) {
1249                         mlog_errno(ret);
1250                         goto out;
1251                 }
1252
1253                 /*
1254                  * Hole or existing extent len can be arbitrary, so
1255                  * cap it to our own allocation request.
1256                  */
1257                 if (alloc_size > clusters)
1258                         alloc_size = clusters;
1259
1260                 if (phys_cpos) {
1261                         /*
1262                          * We already have an allocation at this
1263                          * region so we can safely skip it.
1264                          */
1265                         goto next;
1266                 }
1267
1268                 ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1);
1269                 if (ret) {
1270                         if (ret != -ENOSPC)
1271                                 mlog_errno(ret);
1272                         goto out;
1273                 }
1274
1275 next:
1276                 cpos += alloc_size;
1277                 clusters -= alloc_size;
1278         }
1279
1280         ret = 0;
1281 out:
1282
1283         brelse(di_bh);
1284         return ret;
1285 }
1286
1287 /*
1288  * Truncate a byte range, avoiding pages within partial clusters. This
1289  * preserves those pages for the zeroing code to write to.
1290  */
1291 static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start,
1292                                          u64 byte_len)
1293 {
1294         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1295         loff_t start, end;
1296         struct address_space *mapping = inode->i_mapping;
1297
1298         start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start);
1299         end = byte_start + byte_len;
1300         end = end & ~(osb->s_clustersize - 1);
1301
1302         if (start < end) {
1303                 unmap_mapping_range(mapping, start, end - start, 0);
1304                 truncate_inode_pages_range(mapping, start, end - 1);
1305         }
1306 }
1307
1308 static int ocfs2_zero_partial_clusters(struct inode *inode,
1309                                        u64 start, u64 len)
1310 {
1311         int ret = 0;
1312         u64 tmpend, end = start + len;
1313         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1314         unsigned int csize = osb->s_clustersize;
1315         handle_t *handle;
1316
1317         /*
1318          * The "start" and "end" values are NOT necessarily part of
1319          * the range whose allocation is being deleted. Rather, this
1320          * is what the user passed in with the request. We must zero
1321          * partial clusters here. There's no need to worry about
1322          * physical allocation - the zeroing code knows to skip holes.
1323          */
1324         mlog(0, "byte start: %llu, end: %llu\n",
1325              (unsigned long long)start, (unsigned long long)end);
1326
1327         /*
1328          * If both edges are on a cluster boundary then there's no
1329          * zeroing required as the region is part of the allocation to
1330          * be truncated.
1331          */
1332         if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
1333                 goto out;
1334
1335         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1336         if (IS_ERR(handle)) {
1337                 ret = PTR_ERR(handle);
1338                 mlog_errno(ret);
1339                 goto out;
1340         }
1341
1342         /*
1343          * We want to get the byte offset of the end of the 1st cluster.
1344          */
1345         tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
1346         if (tmpend > end)
1347                 tmpend = end;
1348
1349         mlog(0, "1st range: start: %llu, tmpend: %llu\n",
1350              (unsigned long long)start, (unsigned long long)tmpend);
1351
1352         ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
1353         if (ret)
1354                 mlog_errno(ret);
1355
1356         if (tmpend < end) {
1357                 /*
1358                  * This may make start and end equal, but the zeroing
1359                  * code will skip any work in that case so there's no
1360                  * need to catch it up here.
1361                  */
1362                 start = end & ~(osb->s_clustersize - 1);
1363
1364                 mlog(0, "2nd range: start: %llu, end: %llu\n",
1365                      (unsigned long long)start, (unsigned long long)end);
1366
1367                 ret = ocfs2_zero_range_for_truncate(inode, handle, start, end);
1368                 if (ret)
1369                         mlog_errno(ret);
1370         }
1371
1372         ocfs2_commit_trans(osb, handle);
1373 out:
1374         return ret;
1375 }
1376
1377 static int ocfs2_remove_inode_range(struct inode *inode,
1378                                     struct buffer_head *di_bh, u64 byte_start,
1379                                     u64 byte_len)
1380 {
1381         int ret = 0;
1382         u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
1383         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1384         struct ocfs2_cached_dealloc_ctxt dealloc;
1385         struct address_space *mapping = inode->i_mapping;
1386         struct ocfs2_extent_tree et;
1387
1388         ocfs2_init_dinode_extent_tree(&et, inode, di_bh);
1389         ocfs2_init_dealloc_ctxt(&dealloc);
1390
1391         if (byte_len == 0)
1392                 return 0;
1393
1394         if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1395                 ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
1396                                             byte_start + byte_len, 0);
1397                 if (ret) {
1398                         mlog_errno(ret);
1399                         goto out;
1400                 }
1401                 /*
1402                  * There's no need to get fancy with the page cache
1403                  * truncate of an inline-data inode. We're talking
1404                  * about less than a page here, which will be cached
1405                  * in the dinode buffer anyway.
1406                  */
1407                 unmap_mapping_range(mapping, 0, 0, 0);
1408                 truncate_inode_pages(mapping, 0);
1409                 goto out;
1410         }
1411
1412         trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
1413         trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits;
1414         if (trunc_len >= trunc_start)
1415                 trunc_len -= trunc_start;
1416         else
1417                 trunc_len = 0;
1418
1419         mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n",
1420              (unsigned long long)OCFS2_I(inode)->ip_blkno,
1421              (unsigned long long)byte_start,
1422              (unsigned long long)byte_len, trunc_start, trunc_len);
1423
1424         ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len);
1425         if (ret) {
1426                 mlog_errno(ret);
1427                 goto out;
1428         }
1429
1430         cpos = trunc_start;
1431         while (trunc_len) {
1432                 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1433                                          &alloc_size, NULL);
1434                 if (ret) {
1435                         mlog_errno(ret);
1436                         goto out;
1437                 }
1438
1439                 if (alloc_size > trunc_len)
1440                         alloc_size = trunc_len;
1441
1442                 /* Only do work for non-holes */
1443                 if (phys_cpos != 0) {
1444                         ret = ocfs2_remove_btree_range(inode, &et, cpos,
1445                                                        phys_cpos, alloc_size,
1446                                                        &dealloc);
1447                         if (ret) {
1448                                 mlog_errno(ret);
1449                                 goto out;
1450                         }
1451                 }
1452
1453                 cpos += alloc_size;
1454                 trunc_len -= alloc_size;
1455         }
1456
1457         ocfs2_truncate_cluster_pages(inode, byte_start, byte_len);
1458
1459 out:
1460         ocfs2_schedule_truncate_log_flush(osb, 1);
1461         ocfs2_run_deallocs(osb, &dealloc);
1462
1463         return ret;
1464 }
1465
1466 /*
1467  * Parts of this function taken from xfs_change_file_space()
1468  */
1469 static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
1470                                      loff_t f_pos, unsigned int cmd,
1471                                      struct ocfs2_space_resv *sr,
1472                                      int change_size)
1473 {
1474         int ret;
1475         s64 llen;
1476         loff_t size;
1477         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1478         struct buffer_head *di_bh = NULL;
1479         handle_t *handle;
1480         unsigned long long max_off = inode->i_sb->s_maxbytes;
1481
1482         if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
1483                 return -EROFS;
1484
1485         mutex_lock(&inode->i_mutex);
1486
1487         /*
1488          * This prevents concurrent writes on other nodes
1489          */
1490         ret = ocfs2_rw_lock(inode, 1);
1491         if (ret) {
1492                 mlog_errno(ret);
1493                 goto out;
1494         }
1495
1496         ret = ocfs2_inode_lock(inode, &di_bh, 1);
1497         if (ret) {
1498                 mlog_errno(ret);
1499                 goto out_rw_unlock;
1500         }
1501
1502         if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) {
1503                 ret = -EPERM;
1504                 goto out_inode_unlock;
1505         }
1506
1507         switch (sr->l_whence) {
1508         case 0: /*SEEK_SET*/
1509                 break;
1510         case 1: /*SEEK_CUR*/
1511                 sr->l_start += f_pos;
1512                 break;
1513         case 2: /*SEEK_END*/
1514                 sr->l_start += i_size_read(inode);
1515                 break;
1516         default:
1517                 ret = -EINVAL;
1518                 goto out_inode_unlock;
1519         }
1520         sr->l_whence = 0;
1521
1522         llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len;
1523
1524         if (sr->l_start < 0
1525             || sr->l_start > max_off
1526             || (sr->l_start + llen) < 0
1527             || (sr->l_start + llen) > max_off) {
1528                 ret = -EINVAL;
1529                 goto out_inode_unlock;
1530         }
1531         size = sr->l_start + sr->l_len;
1532
1533         if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) {
1534                 if (sr->l_len <= 0) {
1535                         ret = -EINVAL;
1536                         goto out_inode_unlock;
1537                 }
1538         }
1539
1540         if (file && should_remove_suid(file->f_path.dentry)) {
1541                 ret = __ocfs2_write_remove_suid(inode, di_bh);
1542                 if (ret) {
1543                         mlog_errno(ret);
1544                         goto out_inode_unlock;
1545                 }
1546         }
1547
1548         down_write(&OCFS2_I(inode)->ip_alloc_sem);
1549         switch (cmd) {
1550         case OCFS2_IOC_RESVSP:
1551         case OCFS2_IOC_RESVSP64:
1552                 /*
1553                  * This takes unsigned offsets, but the signed ones we
1554                  * pass have been checked against overflow above.
1555                  */
1556                 ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start,
1557                                                        sr->l_len);
1558                 break;
1559         case OCFS2_IOC_UNRESVSP:
1560         case OCFS2_IOC_UNRESVSP64:
1561                 ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start,
1562                                                sr->l_len);
1563                 break;
1564         default:
1565                 ret = -EINVAL;
1566         }
1567         up_write(&OCFS2_I(inode)->ip_alloc_sem);
1568         if (ret) {
1569                 mlog_errno(ret);
1570                 goto out_inode_unlock;
1571         }
1572
1573         /*
1574          * We update c/mtime for these changes
1575          */
1576         handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1577         if (IS_ERR(handle)) {
1578                 ret = PTR_ERR(handle);
1579                 mlog_errno(ret);
1580                 goto out_inode_unlock;
1581         }
1582
1583         if (change_size && i_size_read(inode) < size)
1584                 i_size_write(inode, size);
1585
1586         inode->i_ctime = inode->i_mtime = CURRENT_TIME;
1587         ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
1588         if (ret < 0)
1589                 mlog_errno(ret);
1590
1591         ocfs2_commit_trans(osb, handle);
1592
1593 out_inode_unlock:
1594         brelse(di_bh);
1595         ocfs2_inode_unlock(inode, 1);
1596 out_rw_unlock:
1597         ocfs2_rw_unlock(inode, 1);
1598
1599 out:
1600         mutex_unlock(&inode->i_mutex);
1601         return ret;
1602 }
1603
1604 int ocfs2_change_file_space(struct file *file, unsigned int cmd,
1605                             struct ocfs2_space_resv *sr)
1606 {
1607         struct inode *inode = file->f_path.dentry->d_inode;
1608         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);;
1609
1610         if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) &&
1611             !ocfs2_writes_unwritten_extents(osb))
1612                 return -ENOTTY;
1613         else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) &&
1614                  !ocfs2_sparse_alloc(osb))
1615                 return -ENOTTY;
1616
1617         if (!S_ISREG(inode->i_mode))
1618                 return -EINVAL;
1619
1620         if (!(file->f_mode & FMODE_WRITE))
1621                 return -EBADF;
1622
1623         return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0);
1624 }
1625
1626 static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset,
1627                             loff_t len)
1628 {
1629         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1630         struct ocfs2_space_resv sr;
1631         int change_size = 1;
1632
1633         if (!ocfs2_writes_unwritten_extents(osb))
1634                 return -EOPNOTSUPP;
1635
1636         if (S_ISDIR(inode->i_mode))
1637                 return -ENODEV;
1638
1639         if (mode & FALLOC_FL_KEEP_SIZE)
1640                 change_size = 0;
1641
1642         sr.l_whence = 0;
1643         sr.l_start = (s64)offset;
1644         sr.l_len = (s64)len;
1645
1646         return __ocfs2_change_file_space(NULL, inode, offset,
1647                                          OCFS2_IOC_RESVSP64, &sr, change_size);
1648 }
1649
1650 static int ocfs2_prepare_inode_for_write(struct dentry *dentry,
1651                                          loff_t *ppos,
1652                                          size_t count,
1653                                          int appending,
1654                                          int *direct_io)
1655 {
1656         int ret = 0, meta_level = 0;
1657         struct inode *inode = dentry->d_inode;
1658         loff_t saved_pos, end;
1659
1660         /* 
1661          * We start with a read level meta lock and only jump to an ex
1662          * if we need to make modifications here.
1663          */
1664         for(;;) {
1665                 ret = ocfs2_inode_lock(inode, NULL, meta_level);
1666                 if (ret < 0) {
1667                         meta_level = -1;
1668                         mlog_errno(ret);
1669                         goto out;
1670                 }
1671
1672                 /* Clear suid / sgid if necessary. We do this here
1673                  * instead of later in the write path because
1674                  * remove_suid() calls ->setattr without any hint that
1675                  * we may have already done our cluster locking. Since
1676                  * ocfs2_setattr() *must* take cluster locks to
1677                  * proceeed, this will lead us to recursively lock the
1678                  * inode. There's also the dinode i_size state which
1679                  * can be lost via setattr during extending writes (we
1680                  * set inode->i_size at the end of a write. */
1681                 if (should_remove_suid(dentry)) {
1682                         if (meta_level == 0) {
1683                                 ocfs2_inode_unlock(inode, meta_level);
1684                                 meta_level = 1;
1685                                 continue;
1686                         }
1687
1688                         ret = ocfs2_write_remove_suid(inode);
1689                         if (ret < 0) {
1690                                 mlog_errno(ret);
1691                                 goto out_unlock;
1692                         }
1693                 }
1694
1695                 /* work on a copy of ppos until we're sure that we won't have
1696                  * to recalculate it due to relocking. */
1697                 if (appending) {
1698                         saved_pos = i_size_read(inode);
1699                         mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos);
1700                 } else {
1701                         saved_pos = *ppos;
1702                 }
1703
1704                 end = saved_pos + count;
1705
1706                 /*
1707                  * Skip the O_DIRECT checks if we don't need
1708                  * them.
1709                  */
1710                 if (!direct_io || !(*direct_io))
1711                         break;
1712
1713                 /*
1714                  * There's no sane way to do direct writes to an inode
1715                  * with inline data.
1716                  */
1717                 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1718                         *direct_io = 0;
1719                         break;
1720                 }
1721
1722                 /*
1723                  * Allowing concurrent direct writes means
1724                  * i_size changes wouldn't be synchronized, so
1725                  * one node could wind up truncating another
1726                  * nodes writes.
1727                  */
1728                 if (end > i_size_read(inode)) {
1729                         *direct_io = 0;
1730                         break;
1731                 }
1732
1733                 /*
1734                  * We don't fill holes during direct io, so
1735                  * check for them here. If any are found, the
1736                  * caller will have to retake some cluster
1737                  * locks and initiate the io as buffered.
1738                  */
1739                 ret = ocfs2_check_range_for_holes(inode, saved_pos, count);
1740                 if (ret == 1) {
1741                         *direct_io = 0;
1742                         ret = 0;
1743                 } else if (ret < 0)
1744                         mlog_errno(ret);
1745                 break;
1746         }
1747
1748         if (appending)
1749                 *ppos = saved_pos;
1750
1751 out_unlock:
1752         ocfs2_inode_unlock(inode, meta_level);
1753
1754 out:
1755         return ret;
1756 }
1757
1758 static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
1759                                     const struct iovec *iov,
1760                                     unsigned long nr_segs,
1761                                     loff_t pos)
1762 {
1763         int ret, direct_io, appending, rw_level, have_alloc_sem  = 0;
1764         int can_do_direct;
1765         ssize_t written = 0;
1766         size_t ocount;          /* original count */
1767         size_t count;           /* after file limit checks */
1768         loff_t old_size, *ppos = &iocb->ki_pos;
1769         u32 old_clusters;
1770         struct file *file = iocb->ki_filp;
1771         struct inode *inode = file->f_path.dentry->d_inode;
1772         struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1773
1774         mlog_entry("(0x%p, %u, '%.*s')\n", file,
1775                    (unsigned int)nr_segs,
1776                    file->f_path.dentry->d_name.len,
1777                    file->f_path.dentry->d_name.name);
1778
1779         if (iocb->ki_left == 0)
1780                 return 0;
1781
1782         vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
1783
1784         appending = file->f_flags & O_APPEND ? 1 : 0;
1785         direct_io = file->f_flags & O_DIRECT ? 1 : 0;
1786
1787         mutex_lock(&inode->i_mutex);
1788
1789 relock:
1790         /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
1791         if (direct_io) {
1792                 down_read(&inode->i_alloc_sem);
1793                 have_alloc_sem = 1;
1794         }
1795
1796         /* concurrent O_DIRECT writes are allowed */
1797         rw_level = !direct_io;
1798         ret = ocfs2_rw_lock(inode, rw_level);
1799         if (ret < 0) {
1800                 mlog_errno(ret);
1801                 goto out_sems;
1802         }
1803
1804         can_do_direct = direct_io;
1805         ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
1806                                             iocb->ki_left, appending,
1807                                             &can_do_direct);
1808         if (ret < 0) {
1809                 mlog_errno(ret);
1810                 goto out;
1811         }
1812
1813         /*
1814          * We can't complete the direct I/O as requested, fall back to
1815          * buffered I/O.
1816          */
1817         if (direct_io && !can_do_direct) {
1818                 ocfs2_rw_unlock(inode, rw_level);
1819                 up_read(&inode->i_alloc_sem);
1820
1821                 have_alloc_sem = 0;
1822                 rw_level = -1;
1823
1824                 direct_io = 0;
1825                 goto relock;
1826         }
1827
1828         /*
1829          * To later detect whether a journal commit for sync writes is
1830          * necessary, we sample i_size, and cluster count here.
1831          */
1832         old_size = i_size_read(inode);
1833         old_clusters = OCFS2_I(inode)->ip_clusters;
1834
1835         /* communicate with ocfs2_dio_end_io */
1836         ocfs2_iocb_set_rw_locked(iocb, rw_level);
1837
1838         if (direct_io) {
1839                 ret = generic_segment_checks(iov, &nr_segs, &ocount,
1840                                              VERIFY_READ);
1841                 if (ret)
1842                         goto out_dio;
1843
1844                 ret = generic_write_checks(file, ppos, &count,
1845                                            S_ISBLK(inode->i_mode));
1846                 if (ret)
1847                         goto out_dio;
1848
1849                 written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
1850                                                     ppos, count, ocount);
1851                 if (written < 0) {
1852                         /*
1853                          * direct write may have instantiated a few
1854                          * blocks outside i_size. Trim these off again.
1855                          * Don't need i_size_read because we hold i_mutex.
1856                          */
1857                         if (*ppos + count > inode->i_size)
1858                                 vmtruncate(inode, inode->i_size);
1859                         ret = written;
1860                         goto out_dio;
1861                 }
1862         } else {
1863                 written = generic_file_aio_write_nolock(iocb, iov, nr_segs,
1864                                                         *ppos);
1865         }
1866
1867 out_dio:
1868         /* buffered aio wouldn't have proper lock coverage today */
1869         BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
1870
1871         if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) {
1872                 /*
1873                  * The generic write paths have handled getting data
1874                  * to disk, but since we don't make use of the dirty
1875                  * inode list, a manual journal commit is necessary
1876                  * here.
1877                  */
1878                 if (old_size != i_size_read(inode) ||
1879                     old_clusters != OCFS2_I(inode)->ip_clusters) {
1880                         ret = jbd2_journal_force_commit(osb->journal->j_journal);
1881                         if (ret < 0)
1882                                 written = ret;
1883                 }
1884         }
1885
1886         /* 
1887          * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
1888          * function pointer which is called when o_direct io completes so that
1889          * it can unlock our rw lock.  (it's the clustered equivalent of
1890          * i_alloc_sem; protects truncate from racing with pending ios).
1891          * Unfortunately there are error cases which call end_io and others
1892          * that don't.  so we don't have to unlock the rw_lock if either an
1893          * async dio is going to do it in the future or an end_io after an
1894          * error has already done it.
1895          */
1896         if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
1897                 rw_level = -1;
1898                 have_alloc_sem = 0;
1899         }
1900
1901 out:
1902         if (rw_level != -1)
1903                 ocfs2_rw_unlock(inode, rw_level);
1904
1905 out_sems:
1906         if (have_alloc_sem)
1907                 up_read(&inode->i_alloc_sem);
1908
1909         mutex_unlock(&inode->i_mutex);
1910
1911         mlog_exit(ret);
1912         return written ? written : ret;
1913 }
1914
1915 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
1916                                        struct file *out,
1917                                        loff_t *ppos,
1918                                        size_t len,
1919                                        unsigned int flags)
1920 {
1921         int ret;
1922         struct inode *inode = out->f_path.dentry->d_inode;
1923
1924         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
1925                    (unsigned int)len,
1926                    out->f_path.dentry->d_name.len,
1927                    out->f_path.dentry->d_name.name);
1928
1929         inode_double_lock(inode, pipe->inode);
1930
1931         ret = ocfs2_rw_lock(inode, 1);
1932         if (ret < 0) {
1933                 mlog_errno(ret);
1934                 goto out;
1935         }
1936
1937         ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
1938                                             NULL);
1939         if (ret < 0) {
1940                 mlog_errno(ret);
1941                 goto out_unlock;
1942         }
1943
1944         ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
1945
1946 out_unlock:
1947         ocfs2_rw_unlock(inode, 1);
1948 out:
1949         inode_double_unlock(inode, pipe->inode);
1950
1951         mlog_exit(ret);
1952         return ret;
1953 }
1954
1955 static ssize_t ocfs2_file_splice_read(struct file *in,
1956                                       loff_t *ppos,
1957                                       struct pipe_inode_info *pipe,
1958                                       size_t len,
1959                                       unsigned int flags)
1960 {
1961         int ret = 0;
1962         struct inode *inode = in->f_path.dentry->d_inode;
1963
1964         mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
1965                    (unsigned int)len,
1966                    in->f_path.dentry->d_name.len,
1967                    in->f_path.dentry->d_name.name);
1968
1969         /*
1970          * See the comment in ocfs2_file_aio_read()
1971          */
1972         ret = ocfs2_inode_lock(inode, NULL, 0);
1973         if (ret < 0) {
1974                 mlog_errno(ret);
1975                 goto bail;
1976         }
1977         ocfs2_inode_unlock(inode, 0);
1978
1979         ret = generic_file_splice_read(in, ppos, pipe, len, flags);
1980
1981 bail:
1982         mlog_exit(ret);
1983         return ret;
1984 }
1985
1986 static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
1987                                    const struct iovec *iov,
1988                                    unsigned long nr_segs,
1989                                    loff_t pos)
1990 {
1991         int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
1992         struct file *filp = iocb->ki_filp;
1993         struct inode *inode = filp->f_path.dentry->d_inode;
1994
1995         mlog_entry("(0x%p, %u, '%.*s')\n", filp,
1996                    (unsigned int)nr_segs,
1997                    filp->f_path.dentry->d_name.len,
1998                    filp->f_path.dentry->d_name.name);
1999
2000         if (!inode) {
2001                 ret = -EINVAL;
2002                 mlog_errno(ret);
2003                 goto bail;
2004         }
2005
2006         /* 
2007          * buffered reads protect themselves in ->readpage().  O_DIRECT reads
2008          * need locks to protect pending reads from racing with truncate.
2009          */
2010         if (filp->f_flags & O_DIRECT) {
2011                 down_read(&inode->i_alloc_sem);
2012                 have_alloc_sem = 1;
2013
2014                 ret = ocfs2_rw_lock(inode, 0);
2015                 if (ret < 0) {
2016                         mlog_errno(ret);
2017                         goto bail;
2018                 }
2019                 rw_level = 0;
2020                 /* communicate with ocfs2_dio_end_io */
2021                 ocfs2_iocb_set_rw_locked(iocb, rw_level);
2022         }
2023
2024         /*
2025          * We're fine letting folks race truncates and extending
2026          * writes with read across the cluster, just like they can
2027          * locally. Hence no rw_lock during read.
2028          * 
2029          * Take and drop the meta data lock to update inode fields
2030          * like i_size. This allows the checks down below
2031          * generic_file_aio_read() a chance of actually working. 
2032          */
2033         ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
2034         if (ret < 0) {
2035                 mlog_errno(ret);
2036                 goto bail;
2037         }
2038         ocfs2_inode_unlock(inode, lock_level);
2039
2040         ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos);
2041         if (ret == -EINVAL)
2042                 mlog(0, "generic_file_aio_read returned -EINVAL\n");
2043
2044         /* buffered aio wouldn't have proper lock coverage today */
2045         BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
2046
2047         /* see ocfs2_file_aio_write */
2048         if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
2049                 rw_level = -1;
2050                 have_alloc_sem = 0;
2051         }
2052
2053 bail:
2054         if (have_alloc_sem)
2055                 up_read(&inode->i_alloc_sem);
2056         if (rw_level != -1) 
2057                 ocfs2_rw_unlock(inode, rw_level);
2058         mlog_exit(ret);
2059
2060         return ret;
2061 }
2062
2063 const struct inode_operations ocfs2_file_iops = {
2064         .setattr        = ocfs2_setattr,
2065         .getattr        = ocfs2_getattr,
2066         .permission     = ocfs2_permission,
2067         .setxattr       = generic_setxattr,
2068         .getxattr       = generic_getxattr,
2069         .listxattr      = ocfs2_listxattr,
2070         .removexattr    = generic_removexattr,
2071         .fallocate      = ocfs2_fallocate,
2072         .fiemap         = ocfs2_fiemap,
2073 };
2074
2075 const struct inode_operations ocfs2_special_file_iops = {
2076         .setattr        = ocfs2_setattr,
2077         .getattr        = ocfs2_getattr,
2078         .permission     = ocfs2_permission,
2079 };
2080
2081 /*
2082  * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with
2083  * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks!
2084  */
2085 const struct file_operations ocfs2_fops = {
2086         .llseek         = generic_file_llseek,
2087         .read           = do_sync_read,
2088         .write          = do_sync_write,
2089         .mmap           = ocfs2_mmap,
2090         .fsync          = ocfs2_sync_file,
2091         .release        = ocfs2_file_release,
2092         .open           = ocfs2_file_open,
2093         .aio_read       = ocfs2_file_aio_read,
2094         .aio_write      = ocfs2_file_aio_write,
2095         .unlocked_ioctl = ocfs2_ioctl,
2096 #ifdef CONFIG_COMPAT
2097         .compat_ioctl   = ocfs2_compat_ioctl,
2098 #endif
2099         .lock           = ocfs2_lock,
2100         .flock          = ocfs2_flock,
2101         .splice_read    = ocfs2_file_splice_read,
2102         .splice_write   = ocfs2_file_splice_write,
2103 };
2104
2105 const struct file_operations ocfs2_dops = {
2106         .llseek         = generic_file_llseek,
2107         .read           = generic_read_dir,
2108         .readdir        = ocfs2_readdir,
2109         .fsync          = ocfs2_sync_file,
2110         .release        = ocfs2_dir_release,
2111         .open           = ocfs2_dir_open,
2112         .unlocked_ioctl = ocfs2_ioctl,
2113 #ifdef CONFIG_COMPAT
2114         .compat_ioctl   = ocfs2_compat_ioctl,
2115 #endif
2116         .lock           = ocfs2_lock,
2117         .flock          = ocfs2_flock,
2118 };
2119
2120 /*
2121  * POSIX-lockless variants of our file_operations.
2122  *
2123  * These will be used if the underlying cluster stack does not support
2124  * posix file locking, if the user passes the "localflocks" mount
2125  * option, or if we have a local-only fs.
2126  *
2127  * ocfs2_flock is in here because all stacks handle UNIX file locks,
2128  * so we still want it in the case of no stack support for
2129  * plocks. Internally, it will do the right thing when asked to ignore
2130  * the cluster.
2131  */
2132 const struct file_operations ocfs2_fops_no_plocks = {
2133         .llseek         = generic_file_llseek,
2134         .read           = do_sync_read,
2135         .write          = do_sync_write,
2136         .mmap           = ocfs2_mmap,
2137         .fsync          = ocfs2_sync_file,
2138         .release        = ocfs2_file_release,
2139         .open           = ocfs2_file_open,
2140         .aio_read       = ocfs2_file_aio_read,
2141         .aio_write      = ocfs2_file_aio_write,
2142         .unlocked_ioctl = ocfs2_ioctl,
2143 #ifdef CONFIG_COMPAT
2144         .compat_ioctl   = ocfs2_compat_ioctl,
2145 #endif
2146         .flock          = ocfs2_flock,
2147         .splice_read    = ocfs2_file_splice_read,
2148         .splice_write   = ocfs2_file_splice_write,
2149 };
2150
2151 const struct file_operations ocfs2_dops_no_plocks = {
2152         .llseek         = generic_file_llseek,
2153         .read           = generic_read_dir,
2154         .readdir        = ocfs2_readdir,
2155         .fsync          = ocfs2_sync_file,
2156         .release        = ocfs2_dir_release,
2157         .open           = ocfs2_dir_open,
2158         .unlocked_ioctl = ocfs2_ioctl,
2159 #ifdef CONFIG_COMPAT
2160         .compat_ioctl   = ocfs2_compat_ioctl,
2161 #endif
2162         .flock          = ocfs2_flock,
2163 };