dabusb: use request_firmware()
[linux-2.6.git] / firmware / Makefile
1 #
2 # kbuild file for firmware/
3 #
4
5 # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6 # leading /, it's relative to $(srctree).
7 fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8 fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
12 # There are three cases to care about:
13 # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14 #    include the firmware files to include, according to .config
15 # 2. 'make modules_install', which will install firmware for modules, and 
16 #    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17 # 3. 'make firmware_install', which installs all firmware, unconditionally.
18
19 # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21 # But be aware that the config file might not be included at all.
22
23 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
24 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
25 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
26 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
27 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
28 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
29                                      ess/maestro3_assp_minisrc.fw
30 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
31                                    yamaha/ds1e_ctrl.fw
32 fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
33                                tigon/tg3_tso5.bin
34 fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
35 fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
36                                   emi26/bitstream.fw
37 fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
38                                   emi62/spdif.fw emi62/midi.fw
39 fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
40                                    kaweth/new_code_fix.bin \
41                                    kaweth/trigger_code_fix.bin
42 ifdef CONFIG_FIRMWARE_IN_KERNEL
43 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
44 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
45 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
46 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
47 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
48 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
49 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
50 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
51 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
52 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
53 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
54 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
55 else
56 fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw        \
57         keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw         \
58         keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw          \
59         keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
60 endif
61 fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
62 fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
63                                            # whiteheat_loader_debug.fw
64 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
65 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
66 fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
67
68 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
69
70 # Directories which we _might_ need to create, so we have a rule for them.
71 firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
72
73 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
74       cmd_mkdir = mkdir -p $@
75
76 quiet_cmd_ihex  = IHEX    $@
77       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
78
79 quiet_cmd_ihex2fw  = IHEX2FW $@
80       cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
81
82 quiet_cmd_h16tofw  = H16TOFW $@
83       cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
84
85 quiet_cmd_fwbin = MK_FW   $@
86       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";                \
87                   FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
88                                 firmware/%.gen.S,%,$@))))";                  \
89                   ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);                \
90                   ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);                       \
91                   PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;                  \
92                   echo "/* Generated by firmware/Makefile */"           > $@;\
93                   echo "    .section .rodata"                           >>$@;\
94                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
95                   echo "_fw_$${FWSTR}_bin:"                             >>$@;\
96                   echo "    .incbin \"$(2)\""                           >>$@;\
97                   echo "_fw_end:"                                       >>$@;\
98                   echo "   .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
99                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
100                   echo "_fw_$${FWSTR}_name:"                            >>$@;\
101                   echo "    .string \"$$FWNAME\""                       >>$@;\
102                   echo "    .section .builtin_fw,\"a\",$${PROGBITS}"    >>$@;\
103                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
104                   echo "    $${ASM_WORD} _fw_$${FWSTR}_name"            >>$@;\
105                   echo "    $${ASM_WORD} _fw_$${FWSTR}_bin"             >>$@;\
106                   echo "    $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin"   >>$@;
107
108 # One of these files will change, or come into existence, whenever
109 # the configuration changes between 32-bit and 64-bit. The .S files
110 # need to change when that happens.
111 wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
112                 include/config/ppc32.h include/config/ppc64.h \
113                 include/config/superh32.h include/config/superh64.h \
114                 include/config/x86_32.h include/config/x86_64.h)
115
116 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
117 # It'll end up depending on these targets, so make them a PHONY rule which
118 # depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
119 PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
120 $(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
121         @true
122
123 # For the $$(dir %) trick, where we need % to be expanded first.
124 .SECONDEXPANSION:
125
126 $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
127                 | $(objtree)/$$(dir %)
128         $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
129 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
130                 include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
131         $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
132
133 # The .o files depend on the binaries directly; the .S files don't.
134 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
135 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
136
137 # .ihex is used just as a simple way to hold binary files in a source tree
138 # where binaries are frowned upon. They are directly converted with objcopy.
139 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
140         $(call cmd,ihex)
141
142 # .HEX is also Intel HEX, but where the offset and length in each record
143 # is actually meaningful, because the firmware has to be loaded in a certain
144 # order rather than as a single binary blob. Thus, we convert them into our
145 # more compact binary representation of ihex records (<linux/ihex.h>)
146 $(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
147         $(call cmd,ihex2fw)
148
149 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
150 $(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
151         $(call cmd,h16tofw)
152
153 $(firmware-dirs):
154         $(call cmd,mkdir)
155
156 obj-y                            += $(patsubst %,%.gen.o, $(fw-external-y))
157 obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
158
159 # Remove .S files and binaries created from ihex
160 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
161 targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
162                                 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
163
164 # Without this, built-in.o won't be created when it's empty, and the
165 # final vmlinux link will fail.
166 obj-n := dummy
167
168 hostprogs-y := ihex2fw