kaweth: use request_firmware()
[linux-2.6.git] / firmware / Makefile
1 #
2 # kbuild file for firmware/
3 #
4
5 # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6 # leading /, it's relative to $(srctree).
7 fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8 fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
12 # There are three cases to care about:
13 # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14 #    include the firmware files to include, according to .config
15 # 2. 'make modules_install', which will install firmware for modules, and 
16 #    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17 # 3. 'make firmware_install', which installs all firmware, unconditionally.
18
19 # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21 # But be aware that the config file might not be included at all.
22
23 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
24 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
25 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
26                                      ess/maestro3_assp_minisrc.fw
27 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
28                                    yamaha/ds1e_ctrl.fw
29 fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
30                                    kaweth/new_code_fix.bin \
31                                    kaweth/trigger_code_fix.bin
32
33 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
34
35 # Directories which we _might_ need to create, so we have a rule for them.
36 firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
37
38 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
39       cmd_mkdir = mkdir -p $@
40
41 quiet_cmd_ihex  = IHEX    $@
42       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
43
44 quiet_cmd_ihex2fw  = IHEX2FW $@
45       cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
46
47 quiet_cmd_h16tofw  = H16TOFW $@
48       cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
49
50 quiet_cmd_fwbin = MK_FW   $@
51       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";                \
52                   FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
53                                 firmware/%.gen.S,%,$@))))";                  \
54                   ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);                \
55                   ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);                       \
56                   PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;                  \
57                   echo "/* Generated by firmware/Makefile */"           > $@;\
58                   echo "    .section .rodata"                           >>$@;\
59                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
60                   echo "_fw_$${FWSTR}_bin:"                             >>$@;\
61                   echo "    .incbin \"$(2)\""                           >>$@;\
62                   echo "_fw_end:"                                       >>$@;\
63                   echo "   .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
64                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
65                   echo "_fw_$${FWSTR}_name:"                            >>$@;\
66                   echo "    .string \"$$FWNAME\""                       >>$@;\
67                   echo "    .section .builtin_fw,\"a\",$${PROGBITS}"    >>$@;\
68                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
69                   echo "    $${ASM_WORD} _fw_$${FWSTR}_name"            >>$@;\
70                   echo "    $${ASM_WORD} _fw_$${FWSTR}_bin"             >>$@;\
71                   echo "    $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin"   >>$@;
72
73 # One of these files will change, or come into existence, whenever
74 # the configuration changes between 32-bit and 64-bit. The .S files
75 # need to change when that happens.
76 wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
77                 include/config/ppc32.h include/config/ppc64.h \
78                 include/config/superh32.h include/config/superh64.h \
79                 include/config/x86_32.h include/config/x86_64.h)
80
81 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
82 # It'll end up depending on these targets, so make them a PHONY rule which
83 # depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
84 PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
85 $(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
86         @true
87
88 # For the $$(dir %) trick, where we need % to be expanded first.
89 .SECONDEXPANSION:
90
91 $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
92                 | $(objtree)/$$(dir %)
93         $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
94 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
95                 include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
96         $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
97
98 # The .o files depend on the binaries directly; the .S files don't.
99 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
100 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
101
102 # .ihex is used just as a simple way to hold binary files in a source tree
103 # where binaries are frowned upon. They are directly converted with objcopy.
104 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
105         $(call cmd,ihex)
106
107 # .HEX is also Intel HEX, but where the offset and length in each record
108 # is actually meaningful, because the firmware has to be loaded in a certain
109 # order rather than as a single binary blob. Thus, we convert them into our
110 # more compact binary representation of ihex records (<linux/ihex.h>)
111 $(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
112         $(call cmd,ihex2fw)
113
114 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
115 $(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
116         $(call cmd,h16tofw)
117
118 $(firmware-dirs):
119         $(call cmd,mkdir)
120
121 obj-y                            += $(patsubst %,%.gen.o, $(fw-external-y))
122 obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
123
124 # Remove .S files and binaries created from ihex
125 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
126 targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
127                                 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
128
129 # Without this, built-in.o won't be created when it's empty, and the
130 # final vmlinux link will fail.
131 obj-n := dummy
132
133 hostprogs-y := ihex2fw