4993a4b3d8ab5d68c2277f8eb580740deee85b50
[linux-2.6.git] / firmware / Makefile
1 #
2 # kbuild file for firmware/
3 #
4
5 # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6 # leading /, it's relative to $(srctree).
7 fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8 fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10 fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
12 # There are three cases to care about:
13 # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14 #    include the firmware files to include, according to .config
15 # 2. 'make modules_install', which will install firmware for modules, and 
16 #    _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17 # 3. 'make firmware_install', which installs all firmware, unconditionally.
18
19 # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21 # But be aware that the config file might not be included at all.
22
23 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
24 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
25 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
26 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
27 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
28                                    cxgb3/t3c_psram-1.1.0.bin \
29                                    cxgb3/t3fw-7.0.0.bin
30 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
31 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
32 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
33 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
34                                      ess/maestro3_assp_minisrc.fw
35 fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
36                                      sb16/ima_adpcm_init.csp \
37                                      sb16/ima_adpcm_playback.csp \
38                                      sb16/ima_adpcm_capture.csp
39 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
40                                    yamaha/ds1e_ctrl.fw
41 fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
42 fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
43                                   emi26/bitstream.fw
44 fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
45                                   emi62/spdif.fw emi62/midi.fw
46 fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
47                                    kaweth/new_code_fix.bin \
48                                    kaweth/trigger_code_fix.bin
49 ifdef CONFIG_FIRMWARE_IN_KERNEL
50 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
51 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
52 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
53 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
54 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
55 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
56 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
57 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
58 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
59 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
60 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
61 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
62 else
63 fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw        \
64         keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw         \
65         keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw          \
66         keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
67 endif
68 fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
69 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
70                                             edgeport/down.fw edgeport/down2.fw
71 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
72 fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
73                                            # whiteheat_loader_debug.fw
74 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
75 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
76 fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
77 fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
78
79 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
80
81 # Directories which we _might_ need to create, so we have a rule for them.
82 firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
83
84 quiet_cmd_mkdir = MKDIR   $(patsubst $(objtree)/%,%,$@)
85       cmd_mkdir = mkdir -p $@
86
87 quiet_cmd_ihex  = IHEX    $@
88       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
89
90 quiet_cmd_ihex2fw  = IHEX2FW $@
91       cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
92
93 quiet_cmd_h16tofw  = H16TOFW $@
94       cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
95
96 quiet_cmd_fwbin = MK_FW   $@
97       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";                \
98                   FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst      \
99                                 firmware/%.gen.S,%,$@))))";                  \
100                   ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long);                \
101                   ASM_ALIGN=$(if $(CONFIG_64BIT),3,2);                       \
102                   PROGBITS=$(if $(CONFIG_ARM),%,@)progbits;                  \
103                   echo "/* Generated by firmware/Makefile */"           > $@;\
104                   echo "    .section .rodata"                           >>$@;\
105                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
106                   echo "_fw_$${FWSTR}_bin:"                             >>$@;\
107                   echo "    .incbin \"$(2)\""                           >>$@;\
108                   echo "_fw_end:"                                       >>$@;\
109                   echo "   .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
110                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
111                   echo "_fw_$${FWSTR}_name:"                            >>$@;\
112                   echo "    .string \"$$FWNAME\""                       >>$@;\
113                   echo "    .section .builtin_fw,\"a\",$${PROGBITS}"    >>$@;\
114                   echo "    .p2align $${ASM_ALIGN}"                     >>$@;\
115                   echo "    $${ASM_WORD} _fw_$${FWSTR}_name"            >>$@;\
116                   echo "    $${ASM_WORD} _fw_$${FWSTR}_bin"             >>$@;\
117                   echo "    $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin"   >>$@;
118
119 # One of these files will change, or come into existence, whenever
120 # the configuration changes between 32-bit and 64-bit. The .S files
121 # need to change when that happens.
122 wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
123                 include/config/ppc32.h include/config/ppc64.h \
124                 include/config/superh32.h include/config/superh64.h \
125                 include/config/x86_32.h include/config/x86_64.h)
126
127 # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
128 # It'll end up depending on these targets, so make them a PHONY rule which
129 # depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
130 PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
131 $(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
132         @true
133
134 # For the $$(dir %) trick, where we need % to be expanded first.
135 .SECONDEXPANSION:
136
137 $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
138                 | $(objtree)/$$(dir %)
139         $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
140 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
141                 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
142         $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
143
144 # The .o files depend on the binaries directly; the .S files don't.
145 $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
146 $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
147
148 # .ihex is used just as a simple way to hold binary files in a source tree
149 # where binaries are frowned upon. They are directly converted with objcopy.
150 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
151         $(call cmd,ihex)
152
153 # Don't depend on ihex2fw if we're installing and it already exists.
154 # Putting it after | in the dependencies doesn't seem sufficient when
155 # we're installing after a cross-compile, because ihex2fw has dependencies
156 # on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
157 # thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
158 # is exported read-only for someone to run 'make install'.
159 ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
160 ihex2fw_dep :=
161 else
162 ihex2fw_dep := $(obj)/ihex2fw
163 endif
164
165 # .HEX is also Intel HEX, but where the offset and length in each record
166 # is actually meaningful, because the firmware has to be loaded in a certain
167 # order rather than as a single binary blob. Thus, we convert them into our
168 # more compact binary representation of ihex records (<linux/ihex.h>)
169 $(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
170         $(call cmd,ihex2fw)
171
172 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
173 $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
174         $(call cmd,h16tofw)
175
176 $(firmware-dirs):
177         $(call cmd,mkdir)
178
179 obj-y                            += $(patsubst %,%.gen.o, $(fw-external-y))
180 obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
181
182 # Remove .S files and binaries created from ihex
183 # (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
184 targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
185                                 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
186
187 # Without this, built-in.o won't be created when it's empty, and the
188 # final vmlinux link will fail.
189 obj-n := dummy
190
191 hostprogs-y := ihex2fw