]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/watchdog/alim1535_wdt.c
parport_pc: show the detection of a 2 serial port ITE8874 chip
[linux-2.6.git] / drivers / watchdog / alim1535_wdt.c
1 /*
2  *      Watchdog for the 7101 PMU version found in the ALi M1535 chipsets
3  *
4  *      This program is free software; you can redistribute it and/or
5  *      modify it under the terms of the GNU General Public License
6  *      as published by the Free Software Foundation; either version
7  *      2 of the License, or (at your option) any later version.
8  */
9
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/types.h>
13 #include <linux/miscdevice.h>
14 #include <linux/watchdog.h>
15 #include <linux/ioport.h>
16 #include <linux/notifier.h>
17 #include <linux/reboot.h>
18 #include <linux/init.h>
19 #include <linux/fs.h>
20 #include <linux/pci.h>
21 #include <linux/uaccess.h>
22 #include <linux/io.h>
23
24 #define WATCHDOG_NAME "ALi_M1535"
25 #define PFX WATCHDOG_NAME ": "
26 #define WATCHDOG_TIMEOUT 60     /* 60 sec default timeout */
27
28 /* internal variables */
29 static unsigned long ali_is_open;
30 static char ali_expect_release;
31 static struct pci_dev *ali_pci;
32 static u32 ali_timeout_bits;            /* stores the computed timeout */
33 static DEFINE_SPINLOCK(ali_lock);       /* Guards the hardware */
34
35 /* module parameters */
36 static int timeout = WATCHDOG_TIMEOUT;
37 module_param(timeout, int, 0);
38 MODULE_PARM_DESC(timeout,
39                 "Watchdog timeout in seconds. (0 < timeout < 18000, default="
40                                 __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
41
42 static int nowayout = WATCHDOG_NOWAYOUT;
43 module_param(nowayout, int, 0);
44 MODULE_PARM_DESC(nowayout,
45                 "Watchdog cannot be stopped once started (default="
46                                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
47
48 /*
49  *      ali_start       -       start watchdog countdown
50  *
51  *      Starts the timer running providing the timer has a counter
52  *      configuration set.
53  */
54
55 static void ali_start(void)
56 {
57         u32 val;
58
59         spin_lock(&ali_lock);
60
61         pci_read_config_dword(ali_pci, 0xCC, &val);
62         val &= ~0x3F;   /* Mask count */
63         val |= (1 << 25) | ali_timeout_bits;
64         pci_write_config_dword(ali_pci, 0xCC, val);
65
66         spin_unlock(&ali_lock);
67 }
68
69 /*
70  *      ali_stop        -       stop the timer countdown
71  *
72  *      Stop the ALi watchdog countdown
73  */
74
75 static void ali_stop(void)
76 {
77         u32 val;
78
79         spin_lock(&ali_lock);
80
81         pci_read_config_dword(ali_pci, 0xCC, &val);
82         val &= ~0x3F;           /* Mask count to zero (disabled) */
83         val &= ~(1 << 25);      /* and for safety mask the reset enable */
84         pci_write_config_dword(ali_pci, 0xCC, val);
85
86         spin_unlock(&ali_lock);
87 }
88
89 /*
90  *      ali_keepalive   -       send a keepalive to the watchdog
91  *
92  *      Send a keepalive to the timer (actually we restart the timer).
93  */
94
95 static void ali_keepalive(void)
96 {
97         ali_start();
98 }
99
100 /*
101  *      ali_settimer    -       compute the timer reload value
102  *      @t: time in seconds
103  *
104  *      Computes the timeout values needed
105  */
106
107 static int ali_settimer(int t)
108 {
109         if (t < 0)
110                 return -EINVAL;
111         else if (t < 60)
112                 ali_timeout_bits = t|(1 << 6);
113         else if (t < 3600)
114                 ali_timeout_bits = (t / 60)|(1 << 7);
115         else if (t < 18000)
116                 ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
117         else
118                 return -EINVAL;
119
120         timeout = t;
121         return 0;
122 }
123
124 /*
125  *      /dev/watchdog handling
126  */
127
128 /*
129  *      ali_write       -       writes to ALi watchdog
130  *      @file: file from VFS
131  *      @data: user address of data
132  *      @len: length of data
133  *      @ppos: pointer to the file offset
134  *
135  *      Handle a write to the ALi watchdog. Writing to the file pings
136  *      the watchdog and resets it. Writing the magic 'V' sequence allows
137  *      the next close to turn off the watchdog.
138  */
139
140 static ssize_t ali_write(struct file *file, const char __user *data,
141                                                 size_t len, loff_t *ppos)
142 {
143         /* See if we got the magic character 'V' and reload the timer */
144         if (len) {
145                 if (!nowayout) {
146                         size_t i;
147
148                         /* note: just in case someone wrote the
149                            magic character five months ago... */
150                         ali_expect_release = 0;
151
152                         /* scan to see whether or not we got
153                            the magic character */
154                         for (i = 0; i != len; i++) {
155                                 char c;
156                                 if (get_user(c, data + i))
157                                         return -EFAULT;
158                                 if (c == 'V')
159                                         ali_expect_release = 42;
160                         }
161                 }
162
163                 /* someone wrote to us, we should reload the timer */
164                 ali_start();
165         }
166         return len;
167 }
168
169 /*
170  *      ali_ioctl       -       handle watchdog ioctls
171  *      @file: VFS file pointer
172  *      @cmd: ioctl number
173  *      @arg: arguments to the ioctl
174  *
175  *      Handle the watchdog ioctls supported by the ALi driver. Really
176  *      we want an extension to enable irq ack monitoring and the like
177  */
178
179 static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
180 {
181         void __user *argp = (void __user *)arg;
182         int __user *p = argp;
183         static const struct watchdog_info ident = {
184                 .options =              WDIOF_KEEPALIVEPING |
185                                         WDIOF_SETTIMEOUT |
186                                         WDIOF_MAGICCLOSE,
187                 .firmware_version =     0,
188                 .identity =             "ALi M1535 WatchDog Timer",
189         };
190
191         switch (cmd) {
192         case WDIOC_GETSUPPORT:
193                 return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
194
195         case WDIOC_GETSTATUS:
196         case WDIOC_GETBOOTSTATUS:
197                 return put_user(0, p);
198         case WDIOC_SETOPTIONS:
199         {
200                 int new_options, retval = -EINVAL;
201
202                 if (get_user(new_options, p))
203                         return -EFAULT;
204                 if (new_options & WDIOS_DISABLECARD) {
205                         ali_stop();
206                         retval = 0;
207                 }
208                 if (new_options & WDIOS_ENABLECARD) {
209                         ali_start();
210                         retval = 0;
211                 }
212                 return retval;
213         }
214         case WDIOC_KEEPALIVE:
215                 ali_keepalive();
216                 return 0;
217         case WDIOC_SETTIMEOUT:
218         {
219                 int new_timeout;
220                 if (get_user(new_timeout, p))
221                         return -EFAULT;
222                 if (ali_settimer(new_timeout))
223                         return -EINVAL;
224                 ali_keepalive();
225                 /* Fall */
226         }
227         case WDIOC_GETTIMEOUT:
228                 return put_user(timeout, p);
229         default:
230                 return -ENOTTY;
231         }
232 }
233
234 /*
235  *      ali_open        -       handle open of ali watchdog
236  *      @inode: inode from VFS
237  *      @file: file from VFS
238  *
239  *      Open the ALi watchdog device. Ensure only one person opens it
240  *      at a time. Also start the watchdog running.
241  */
242
243 static int ali_open(struct inode *inode, struct file *file)
244 {
245         /* /dev/watchdog can only be opened once */
246         if (test_and_set_bit(0, &ali_is_open))
247                 return -EBUSY;
248
249         /* Activate */
250         ali_start();
251         return nonseekable_open(inode, file);
252 }
253
254 /*
255  *      ali_release     -       close an ALi watchdog
256  *      @inode: inode from VFS
257  *      @file: file from VFS
258  *
259  *      Close the ALi watchdog device. Actual shutdown of the timer
260  *      only occurs if the magic sequence has been set.
261  */
262
263 static int ali_release(struct inode *inode, struct file *file)
264 {
265         /*
266          *      Shut off the timer.
267          */
268         if (ali_expect_release == 42)
269                 ali_stop();
270         else {
271                 printk(KERN_CRIT PFX
272                                 "Unexpected close, not stopping watchdog!\n");
273                 ali_keepalive();
274         }
275         clear_bit(0, &ali_is_open);
276         ali_expect_release = 0;
277         return 0;
278 }
279
280 /*
281  *      ali_notify_sys  -       System down notifier
282  *
283  *      Notifier for system down
284  */
285
286
287 static int ali_notify_sys(struct notifier_block *this,
288                                         unsigned long code, void *unused)
289 {
290         if (code == SYS_DOWN || code == SYS_HALT)
291                 ali_stop();             /* Turn the WDT off */
292         return NOTIFY_DONE;
293 }
294
295 /*
296  *      Data for PCI driver interface
297  *
298  *      This data only exists for exporting the supported
299  *      PCI ids via MODULE_DEVICE_TABLE.  We do not actually
300  *      register a pci_driver, because someone else might one day
301  *      want to register another driver on the same PCI id.
302  */
303
304 static struct pci_device_id ali_pci_tbl[] = {
305         { PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,},
306         { PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,},
307         { 0, },
308 };
309 MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
310
311 /*
312  *      ali_find_watchdog       -       find a 1535 and 7101
313  *
314  *      Scans the PCI hardware for a 1535 series bridge and matching 7101
315  *      watchdog device. This may be overtight but it is better to be safe
316  */
317
318 static int __init ali_find_watchdog(void)
319 {
320         struct pci_dev *pdev;
321         u32 wdog;
322
323         /* Check for a 1533/1535 series bridge */
324         pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
325         if (pdev == NULL)
326                 pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL);
327         if (pdev == NULL)
328                 return -ENODEV;
329         pci_dev_put(pdev);
330
331         /* Check for the a 7101 PMU */
332         pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
333         if (pdev == NULL)
334                 return -ENODEV;
335
336         if (pci_enable_device(pdev)) {
337                 pci_dev_put(pdev);
338                 return -EIO;
339         }
340
341         ali_pci = pdev;
342
343         /*
344          *      Initialize the timer bits
345          */
346         pci_read_config_dword(pdev, 0xCC, &wdog);
347
348         /* Timer bits */
349         wdog &= ~0x3F;
350         /* Issued events */
351         wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
352         /* No monitor bits */
353         wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
354
355         pci_write_config_dword(pdev, 0xCC, wdog);
356
357         return 0;
358 }
359
360 /*
361  *      Kernel Interfaces
362  */
363
364 static const struct file_operations ali_fops = {
365         .owner          =       THIS_MODULE,
366         .llseek         =       no_llseek,
367         .write          =       ali_write,
368         .unlocked_ioctl =       ali_ioctl,
369         .open           =       ali_open,
370         .release        =       ali_release,
371 };
372
373 static struct miscdevice ali_miscdev = {
374         .minor =        WATCHDOG_MINOR,
375         .name =         "watchdog",
376         .fops =         &ali_fops,
377 };
378
379 static struct notifier_block ali_notifier = {
380         .notifier_call =        ali_notify_sys,
381 };
382
383 /*
384  *      watchdog_init   -       module initialiser
385  *
386  *      Scan for a suitable watchdog and if so initialize it. Return an error
387  *      if we cannot, the error causes the module to unload
388  */
389
390 static int __init watchdog_init(void)
391 {
392         int ret;
393
394         /* Check whether or not the hardware watchdog is there */
395         if (ali_find_watchdog() != 0)
396                 return -ENODEV;
397
398         /* Check that the timeout value is within it's range;
399            if not reset to the default */
400         if (timeout < 1 || timeout >= 18000) {
401                 timeout = WATCHDOG_TIMEOUT;
402                 printk(KERN_INFO PFX
403                      "timeout value must be 0 < timeout < 18000, using %d\n",
404                                                         timeout);
405         }
406
407         /* Calculate the watchdog's timeout */
408         ali_settimer(timeout);
409
410         ret = register_reboot_notifier(&ali_notifier);
411         if (ret != 0) {
412                 printk(KERN_ERR PFX
413                         "cannot register reboot notifier (err=%d)\n", ret);
414                 goto out;
415         }
416
417         ret = misc_register(&ali_miscdev);
418         if (ret != 0) {
419                 printk(KERN_ERR PFX
420                         "cannot register miscdev on minor=%d (err=%d)\n",
421                                                 WATCHDOG_MINOR, ret);
422                 goto unreg_reboot;
423         }
424
425         printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
426                 timeout, nowayout);
427
428 out:
429         return ret;
430 unreg_reboot:
431         unregister_reboot_notifier(&ali_notifier);
432         goto out;
433 }
434
435 /*
436  *      watchdog_exit   -       module de-initialiser
437  *
438  *      Called while unloading a successfully installed watchdog module.
439  */
440
441 static void __exit watchdog_exit(void)
442 {
443         /* Stop the timer before we leave */
444         ali_stop();
445
446         /* Deregister */
447         misc_deregister(&ali_miscdev);
448         unregister_reboot_notifier(&ali_notifier);
449         pci_dev_put(ali_pci);
450 }
451
452 module_init(watchdog_init);
453 module_exit(watchdog_exit);
454
455 MODULE_AUTHOR("Alan Cox");
456 MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
457 MODULE_LICENSE("GPL");
458 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);