atmel_lcdfb: correct fifo size for some products
[linux-2.6.git] / drivers / video / atmel_lcdfb.c
1 /*
2  *  Driver for AT91/AT32 LCD Controller
3  *
4  *  Copyright (C) 2007 Atmel Corporation
5  *
6  * This file is subject to the terms and conditions of the GNU General Public
7  * License.  See the file COPYING in the main directory of this archive for
8  * more details.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/interrupt.h>
15 #include <linux/clk.h>
16 #include <linux/fb.h>
17 #include <linux/init.h>
18 #include <linux/delay.h>
19 #include <linux/backlight.h>
20
21 #include <mach/board.h>
22 #include <mach/cpu.h>
23 #include <mach/gpio.h>
24
25 #include <video/atmel_lcdc.h>
26
27 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
28 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
29
30 /* configurable parameters */
31 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
32 #define ATMEL_LCDC_DMA_BURST_LEN        8       /* words */
33 #define ATMEL_LCDC_FIFO_SIZE            512     /* words */
34
35 #if defined(CONFIG_ARCH_AT91)
36 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
37                                          | FBINFO_PARTIAL_PAN_OK \
38                                          | FBINFO_HWACCEL_YPAN)
39
40 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
41                                         struct fb_var_screeninfo *var)
42 {
43
44 }
45 #elif defined(CONFIG_AVR32)
46 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
47                                         | FBINFO_PARTIAL_PAN_OK \
48                                         | FBINFO_HWACCEL_XPAN \
49                                         | FBINFO_HWACCEL_YPAN)
50
51 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
52                                      struct fb_var_screeninfo *var)
53 {
54         u32 dma2dcfg;
55         u32 pixeloff;
56
57         pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
58
59         dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
60         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
61         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
62
63         /* Update configuration */
64         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
65                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
66                     | ATMEL_LCDC_DMAUPDT);
67 }
68 #endif
69
70 static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
71                 | ATMEL_LCDC_POL_POSITIVE
72                 | ATMEL_LCDC_ENA_PWMENABLE;
73
74 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
75
76 /* some bl->props field just changed */
77 static int atmel_bl_update_status(struct backlight_device *bl)
78 {
79         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
80         int                     power = sinfo->bl_power;
81         int                     brightness = bl->props.brightness;
82
83         /* REVISIT there may be a meaningful difference between
84          * fb_blank and power ... there seem to be some cases
85          * this doesn't handle correctly.
86          */
87         if (bl->props.fb_blank != sinfo->bl_power)
88                 power = bl->props.fb_blank;
89         else if (bl->props.power != sinfo->bl_power)
90                 power = bl->props.power;
91
92         if (brightness < 0 && power == FB_BLANK_UNBLANK)
93                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
94         else if (power != FB_BLANK_UNBLANK)
95                 brightness = 0;
96
97         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
98         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
99                         brightness ? contrast_ctr : 0);
100
101         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
102
103         return 0;
104 }
105
106 static int atmel_bl_get_brightness(struct backlight_device *bl)
107 {
108         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
109
110         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
111 }
112
113 static struct backlight_ops atmel_lcdc_bl_ops = {
114         .update_status = atmel_bl_update_status,
115         .get_brightness = atmel_bl_get_brightness,
116 };
117
118 static void init_backlight(struct atmel_lcdfb_info *sinfo)
119 {
120         struct backlight_device *bl;
121
122         sinfo->bl_power = FB_BLANK_UNBLANK;
123
124         if (sinfo->backlight)
125                 return;
126
127         bl = backlight_device_register("backlight", &sinfo->pdev->dev,
128                         sinfo, &atmel_lcdc_bl_ops);
129         if (IS_ERR(bl)) {
130                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
131                                 PTR_ERR(bl));
132                 return;
133         }
134         sinfo->backlight = bl;
135
136         bl->props.power = FB_BLANK_UNBLANK;
137         bl->props.fb_blank = FB_BLANK_UNBLANK;
138         bl->props.max_brightness = 0xff;
139         bl->props.brightness = atmel_bl_get_brightness(bl);
140 }
141
142 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
143 {
144         if (sinfo->backlight)
145                 backlight_device_unregister(sinfo->backlight);
146 }
147
148 #else
149
150 static void init_backlight(struct atmel_lcdfb_info *sinfo)
151 {
152         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
153 }
154
155 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
156 {
157 }
158
159 #endif
160
161 static void init_contrast(struct atmel_lcdfb_info *sinfo)
162 {
163         /* have some default contrast/backlight settings */
164         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
165         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
166
167         if (sinfo->lcdcon_is_backlight)
168                 init_backlight(sinfo);
169 }
170
171
172 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
173         .type           = FB_TYPE_PACKED_PIXELS,
174         .visual         = FB_VISUAL_TRUECOLOR,
175         .xpanstep       = 0,
176         .ypanstep       = 1,
177         .ywrapstep      = 0,
178         .accel          = FB_ACCEL_NONE,
179 };
180
181 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
182 {
183         unsigned long value;
184
185         if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
186                 return xres;
187
188         value = xres;
189         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
190                 /* STN display */
191                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
192                         value *= 3;
193                 }
194                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
195                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
196                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
197                         value = DIV_ROUND_UP(value, 4);
198                 else
199                         value = DIV_ROUND_UP(value, 8);
200         }
201
202         return value;
203 }
204
205 static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
206 {
207         /* Turn off the LCD controller and the DMA controller */
208         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
209                         sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
210
211         /* Wait for the LCDC core to become idle */
212         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
213                 msleep(10);
214
215         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
216 }
217
218 static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
219 {
220         atmel_lcdfb_stop_nowait(sinfo);
221
222         /* Wait for DMA engine to become idle... */
223         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
224                 msleep(10);
225 }
226
227 static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
228 {
229         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
230         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
231                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
232                 | ATMEL_LCDC_PWR);
233 }
234
235 static void atmel_lcdfb_update_dma(struct fb_info *info,
236                                struct fb_var_screeninfo *var)
237 {
238         struct atmel_lcdfb_info *sinfo = info->par;
239         struct fb_fix_screeninfo *fix = &info->fix;
240         unsigned long dma_addr;
241
242         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
243                     + var->xoffset * var->bits_per_pixel / 8);
244
245         dma_addr &= ~3UL;
246
247         /* Set framebuffer DMA base address and pixel offset */
248         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
249
250         atmel_lcdfb_update_dma2d(sinfo, var);
251 }
252
253 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
254 {
255         struct fb_info *info = sinfo->info;
256
257         dma_free_writecombine(info->device, info->fix.smem_len,
258                                 info->screen_base, info->fix.smem_start);
259 }
260
261 /**
262  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
263  *      @sinfo: the frame buffer to allocate memory for
264  */
265 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
266 {
267         struct fb_info *info = sinfo->info;
268         struct fb_var_screeninfo *var = &info->var;
269         unsigned int smem_len;
270
271         smem_len = (var->xres_virtual * var->yres_virtual
272                     * ((var->bits_per_pixel + 7) / 8));
273         info->fix.smem_len = max(smem_len, sinfo->smem_len);
274
275         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
276                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
277
278         if (!info->screen_base) {
279                 return -ENOMEM;
280         }
281
282         memset(info->screen_base, 0, info->fix.smem_len);
283
284         return 0;
285 }
286
287 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
288                                                      struct fb_info *info)
289 {
290         struct fb_videomode varfbmode;
291         const struct fb_videomode *fbmode = NULL;
292
293         fb_var_to_videomode(&varfbmode, var);
294         fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
295         if (fbmode)
296                 fb_videomode_to_var(var, fbmode);
297         return fbmode;
298 }
299
300
301 /**
302  *      atmel_lcdfb_check_var - Validates a var passed in.
303  *      @var: frame buffer variable screen structure
304  *      @info: frame buffer structure that represents a single frame buffer
305  *
306  *      Checks to see if the hardware supports the state requested by
307  *      var passed in. This function does not alter the hardware
308  *      state!!!  This means the data stored in struct fb_info and
309  *      struct atmel_lcdfb_info do not change. This includes the var
310  *      inside of struct fb_info.  Do NOT change these. This function
311  *      can be called on its own if we intent to only test a mode and
312  *      not actually set it. The stuff in modedb.c is a example of
313  *      this. If the var passed in is slightly off by what the
314  *      hardware can support then we alter the var PASSED in to what
315  *      we can do. If the hardware doesn't support mode change a
316  *      -EINVAL will be returned by the upper layers. You don't need
317  *      to implement this function then. If you hardware doesn't
318  *      support changing the resolution then this function is not
319  *      needed. In this case the driver would just provide a var that
320  *      represents the static state the screen is in.
321  *
322  *      Returns negative errno on error, or zero on success.
323  */
324 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
325                              struct fb_info *info)
326 {
327         struct device *dev = info->device;
328         struct atmel_lcdfb_info *sinfo = info->par;
329         unsigned long clk_value_khz;
330
331         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
332
333         dev_dbg(dev, "%s:\n", __func__);
334
335         if (!(var->pixclock && var->bits_per_pixel)) {
336                 /* choose a suitable mode if possible */
337                 if (!atmel_lcdfb_choose_mode(var, info)) {
338                         dev_err(dev, "needed value not specified\n");
339                         return -EINVAL;
340                 }
341         }
342
343         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
344         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
345         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
346         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
347
348         if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
349                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
350                 return -EINVAL;
351         }
352
353         /* Do not allow to have real resoulution larger than virtual */
354         if (var->xres > var->xres_virtual)
355                 var->xres_virtual = var->xres;
356
357         if (var->yres > var->yres_virtual)
358                 var->yres_virtual = var->yres;
359
360         /* Force same alignment for each line */
361         var->xres = (var->xres + 3) & ~3UL;
362         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
363
364         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
365         var->transp.msb_right = 0;
366         var->transp.offset = var->transp.length = 0;
367         var->xoffset = var->yoffset = 0;
368
369         if (info->fix.smem_len) {
370                 unsigned int smem_len = (var->xres_virtual * var->yres_virtual
371                                          * ((var->bits_per_pixel + 7) / 8));
372                 if (smem_len > info->fix.smem_len)
373                         return -EINVAL;
374         }
375
376         /* Saturate vertical and horizontal timings at maximum values */
377         var->vsync_len = min_t(u32, var->vsync_len,
378                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
379         var->upper_margin = min_t(u32, var->upper_margin,
380                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
381         var->lower_margin = min_t(u32, var->lower_margin,
382                         ATMEL_LCDC_VFP);
383         var->right_margin = min_t(u32, var->right_margin,
384                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
385         var->hsync_len = min_t(u32, var->hsync_len,
386                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
387         var->left_margin = min_t(u32, var->left_margin,
388                         ATMEL_LCDC_HBP + 1);
389
390         /* Some parameters can't be zero */
391         var->vsync_len = max_t(u32, var->vsync_len, 1);
392         var->right_margin = max_t(u32, var->right_margin, 1);
393         var->hsync_len = max_t(u32, var->hsync_len, 1);
394         var->left_margin = max_t(u32, var->left_margin, 1);
395
396         switch (var->bits_per_pixel) {
397         case 1:
398         case 2:
399         case 4:
400         case 8:
401                 var->red.offset = var->green.offset = var->blue.offset = 0;
402                 var->red.length = var->green.length = var->blue.length
403                         = var->bits_per_pixel;
404                 break;
405         case 15:
406         case 16:
407                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
408                         /* RGB:565 mode */
409                         var->red.offset = 11;
410                         var->blue.offset = 0;
411                         var->green.length = 6;
412                 } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
413                         var->red.offset = 10;
414                         var->blue.offset = 0;
415                         var->green.length = 5;
416                 } else {
417                         /* BGR:555 mode */
418                         var->red.offset = 0;
419                         var->blue.offset = 10;
420                         var->green.length = 5;
421                 }
422                 var->green.offset = 5;
423                 var->red.length = var->blue.length = 5;
424                 break;
425         case 32:
426                 var->transp.offset = 24;
427                 var->transp.length = 8;
428                 /* fall through */
429         case 24:
430                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
431                         /* RGB:888 mode */
432                         var->red.offset = 16;
433                         var->blue.offset = 0;
434                 } else {
435                         /* BGR:888 mode */
436                         var->red.offset = 0;
437                         var->blue.offset = 16;
438                 }
439                 var->green.offset = 8;
440                 var->red.length = var->green.length = var->blue.length = 8;
441                 break;
442         default:
443                 dev_err(dev, "color depth %d not supported\n",
444                                         var->bits_per_pixel);
445                 return -EINVAL;
446         }
447
448         return 0;
449 }
450
451 /*
452  * LCD reset sequence
453  */
454 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
455 {
456         might_sleep();
457
458         atmel_lcdfb_stop(sinfo);
459         atmel_lcdfb_start(sinfo);
460 }
461
462 /**
463  *      atmel_lcdfb_set_par - Alters the hardware state.
464  *      @info: frame buffer structure that represents a single frame buffer
465  *
466  *      Using the fb_var_screeninfo in fb_info we set the resolution
467  *      of the this particular framebuffer. This function alters the
468  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
469  *      not alter var in fb_info since we are using that data. This
470  *      means we depend on the data in var inside fb_info to be
471  *      supported by the hardware.  atmel_lcdfb_check_var is always called
472  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
473  *      change the resolution you don't need this function.
474  *
475  */
476 static int atmel_lcdfb_set_par(struct fb_info *info)
477 {
478         struct atmel_lcdfb_info *sinfo = info->par;
479         unsigned long hozval_linesz;
480         unsigned long value;
481         unsigned long clk_value_khz;
482         unsigned long bits_per_line;
483
484         might_sleep();
485
486         dev_dbg(info->device, "%s:\n", __func__);
487         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
488                  info->var.xres, info->var.yres,
489                  info->var.xres_virtual, info->var.yres_virtual);
490
491         atmel_lcdfb_stop_nowait(sinfo);
492
493         if (info->var.bits_per_pixel == 1)
494                 info->fix.visual = FB_VISUAL_MONO01;
495         else if (info->var.bits_per_pixel <= 8)
496                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
497         else
498                 info->fix.visual = FB_VISUAL_TRUECOLOR;
499
500         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
501         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
502
503         /* Re-initialize the DMA engine... */
504         dev_dbg(info->device, "  * update DMA engine\n");
505         atmel_lcdfb_update_dma(info, &info->var);
506
507         /* ...set frame size and burst length = 8 words (?) */
508         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
509         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
510         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
511
512         /* Now, the LCDC core... */
513
514         /* Set pixel clock */
515         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
516
517         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
518
519         if (value < 2) {
520                 dev_notice(info->device, "Bypassing pixel clock divider\n");
521                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
522         } else {
523                 value = (value / 2) - 1;
524                 dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
525                                 value);
526                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
527                                 value << ATMEL_LCDC_CLKVAL_OFFSET);
528                 info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
529                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
530                                         PICOS2KHZ(info->var.pixclock));
531         }
532
533
534         /* Initialize control register 2 */
535         value = sinfo->default_lcdcon2;
536
537         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
538                 value |= ATMEL_LCDC_INVLINE_INVERTED;
539         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
540                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
541
542         switch (info->var.bits_per_pixel) {
543                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
544                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
545                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
546                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
547                 case 15: /* fall through */
548                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
549                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
550                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
551                 default: BUG(); break;
552         }
553         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
554         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
555
556         /* Vertical timing */
557         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
558         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
559         value |= info->var.lower_margin;
560         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
561         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
562
563         /* Horizontal timing */
564         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
565         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
566         value |= (info->var.left_margin - 1);
567         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
568         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
569
570         /* Horizontal value (aka line size) */
571         hozval_linesz = compute_hozval(info->var.xres,
572                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
573
574         /* Display size */
575         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
576         value |= info->var.yres - 1;
577         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
578         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
579
580         /* FIFO Threshold: Use formula from data sheet */
581         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
582         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
583
584         /* Toggle LCD_MODE every frame */
585         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
586
587         /* Disable all interrupts */
588         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
589         /* Enable FIFO & DMA errors */
590         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
591
592         /* ...wait for DMA engine to become idle... */
593         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
594                 msleep(10);
595
596         atmel_lcdfb_start(sinfo);
597
598         dev_dbg(info->device, "  * DONE\n");
599
600         return 0;
601 }
602
603 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
604 {
605         chan &= 0xffff;
606         chan >>= 16 - bf->length;
607         return chan << bf->offset;
608 }
609
610 /**
611  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
612  *      @regno: Which register in the CLUT we are programming
613  *      @red: The red value which can be up to 16 bits wide
614  *      @green: The green value which can be up to 16 bits wide
615  *      @blue:  The blue value which can be up to 16 bits wide.
616  *      @transp: If supported the alpha value which can be up to 16 bits wide.
617  *      @info: frame buffer info structure
618  *
619  *      Set a single color register. The values supplied have a 16 bit
620  *      magnitude which needs to be scaled in this function for the hardware.
621  *      Things to take into consideration are how many color registers, if
622  *      any, are supported with the current color visual. With truecolor mode
623  *      no color palettes are supported. Here a psuedo palette is created
624  *      which we store the value in pseudo_palette in struct fb_info. For
625  *      pseudocolor mode we have a limited color palette. To deal with this
626  *      we can program what color is displayed for a particular pixel value.
627  *      DirectColor is similar in that we can program each color field. If
628  *      we have a static colormap we don't need to implement this function.
629  *
630  *      Returns negative errno on error, or zero on success. In an
631  *      ideal world, this would have been the case, but as it turns
632  *      out, the other drivers return 1 on failure, so that's what
633  *      we're going to do.
634  */
635 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
636                              unsigned int green, unsigned int blue,
637                              unsigned int transp, struct fb_info *info)
638 {
639         struct atmel_lcdfb_info *sinfo = info->par;
640         unsigned int val;
641         u32 *pal;
642         int ret = 1;
643
644         if (info->var.grayscale)
645                 red = green = blue = (19595 * red + 38470 * green
646                                       + 7471 * blue) >> 16;
647
648         switch (info->fix.visual) {
649         case FB_VISUAL_TRUECOLOR:
650                 if (regno < 16) {
651                         pal = info->pseudo_palette;
652
653                         val  = chan_to_field(red, &info->var.red);
654                         val |= chan_to_field(green, &info->var.green);
655                         val |= chan_to_field(blue, &info->var.blue);
656
657                         pal[regno] = val;
658                         ret = 0;
659                 }
660                 break;
661
662         case FB_VISUAL_PSEUDOCOLOR:
663                 if (regno < 256) {
664                         val  = ((red   >> 11) & 0x001f);
665                         val |= ((green >>  6) & 0x03e0);
666                         val |= ((blue  >>  1) & 0x7c00);
667
668                         /*
669                          * TODO: intensity bit. Maybe something like
670                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
671                          */
672
673                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
674                         ret = 0;
675                 }
676                 break;
677
678         case FB_VISUAL_MONO01:
679                 if (regno < 2) {
680                         val = (regno == 0) ? 0x00 : 0x1F;
681                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
682                         ret = 0;
683                 }
684                 break;
685
686         }
687
688         return ret;
689 }
690
691 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
692                                struct fb_info *info)
693 {
694         dev_dbg(info->device, "%s\n", __func__);
695
696         atmel_lcdfb_update_dma(info, var);
697
698         return 0;
699 }
700
701 static struct fb_ops atmel_lcdfb_ops = {
702         .owner          = THIS_MODULE,
703         .fb_check_var   = atmel_lcdfb_check_var,
704         .fb_set_par     = atmel_lcdfb_set_par,
705         .fb_setcolreg   = atmel_lcdfb_setcolreg,
706         .fb_pan_display = atmel_lcdfb_pan_display,
707         .fb_fillrect    = cfb_fillrect,
708         .fb_copyarea    = cfb_copyarea,
709         .fb_imageblit   = cfb_imageblit,
710 };
711
712 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
713 {
714         struct fb_info *info = dev_id;
715         struct atmel_lcdfb_info *sinfo = info->par;
716         u32 status;
717
718         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
719         if (status & ATMEL_LCDC_UFLWI) {
720                 dev_warn(info->device, "FIFO underflow %#x\n", status);
721                 /* reset DMA and FIFO to avoid screen shifting */
722                 schedule_work(&sinfo->task);
723         }
724         lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
725         return IRQ_HANDLED;
726 }
727
728 /*
729  * LCD controller task (to reset the LCD)
730  */
731 static void atmel_lcdfb_task(struct work_struct *work)
732 {
733         struct atmel_lcdfb_info *sinfo =
734                 container_of(work, struct atmel_lcdfb_info, task);
735
736         atmel_lcdfb_reset(sinfo);
737 }
738
739 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
740 {
741         struct fb_info *info = sinfo->info;
742         int ret = 0;
743
744         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
745
746         dev_info(info->device,
747                "%luKiB frame buffer at %08lx (mapped at %p)\n",
748                (unsigned long)info->fix.smem_len / 1024,
749                (unsigned long)info->fix.smem_start,
750                info->screen_base);
751
752         /* Allocate colormap */
753         ret = fb_alloc_cmap(&info->cmap, 256, 0);
754         if (ret < 0)
755                 dev_err(info->device, "Alloc color map failed\n");
756
757         return ret;
758 }
759
760 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
761 {
762         if (sinfo->bus_clk)
763                 clk_enable(sinfo->bus_clk);
764         clk_enable(sinfo->lcdc_clk);
765 }
766
767 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
768 {
769         if (sinfo->bus_clk)
770                 clk_disable(sinfo->bus_clk);
771         clk_disable(sinfo->lcdc_clk);
772 }
773
774
775 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
776 {
777         struct device *dev = &pdev->dev;
778         struct fb_info *info;
779         struct atmel_lcdfb_info *sinfo;
780         struct atmel_lcdfb_info *pdata_sinfo;
781         struct fb_videomode fbmode;
782         struct resource *regs = NULL;
783         struct resource *map = NULL;
784         int ret;
785
786         dev_dbg(dev, "%s BEGIN\n", __func__);
787
788         ret = -ENOMEM;
789         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
790         if (!info) {
791                 dev_err(dev, "cannot allocate memory\n");
792                 goto out;
793         }
794
795         sinfo = info->par;
796
797         if (dev->platform_data) {
798                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
799                 sinfo->default_bpp = pdata_sinfo->default_bpp;
800                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
801                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
802                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
803                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
804                 sinfo->guard_time = pdata_sinfo->guard_time;
805                 sinfo->smem_len = pdata_sinfo->smem_len;
806                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
807                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
808         } else {
809                 dev_err(dev, "cannot get default configuration\n");
810                 goto free_info;
811         }
812         sinfo->info = info;
813         sinfo->pdev = pdev;
814
815         strcpy(info->fix.id, sinfo->pdev->name);
816         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
817         info->pseudo_palette = sinfo->pseudo_palette;
818         info->fbops = &atmel_lcdfb_ops;
819
820         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
821         info->fix = atmel_lcdfb_fix;
822
823         /* Enable LCDC Clocks */
824         if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
825                 sinfo->bus_clk = clk_get(dev, "hck1");
826                 if (IS_ERR(sinfo->bus_clk)) {
827                         ret = PTR_ERR(sinfo->bus_clk);
828                         goto free_info;
829                 }
830         }
831         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
832         if (IS_ERR(sinfo->lcdc_clk)) {
833                 ret = PTR_ERR(sinfo->lcdc_clk);
834                 goto put_bus_clk;
835         }
836         atmel_lcdfb_start_clock(sinfo);
837
838         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
839                         info->monspecs.modedb_len, info->monspecs.modedb,
840                         sinfo->default_bpp);
841         if (!ret) {
842                 dev_err(dev, "no suitable video mode found\n");
843                 goto stop_clk;
844         }
845
846
847         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
848         if (!regs) {
849                 dev_err(dev, "resources unusable\n");
850                 ret = -ENXIO;
851                 goto stop_clk;
852         }
853
854         sinfo->irq_base = platform_get_irq(pdev, 0);
855         if (sinfo->irq_base < 0) {
856                 dev_err(dev, "unable to get irq\n");
857                 ret = sinfo->irq_base;
858                 goto stop_clk;
859         }
860
861         /* Initialize video memory */
862         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
863         if (map) {
864                 /* use a pre-allocated memory buffer */
865                 info->fix.smem_start = map->start;
866                 info->fix.smem_len = map->end - map->start + 1;
867                 if (!request_mem_region(info->fix.smem_start,
868                                         info->fix.smem_len, pdev->name)) {
869                         ret = -EBUSY;
870                         goto stop_clk;
871                 }
872
873                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
874                 if (!info->screen_base)
875                         goto release_intmem;
876
877                 /*
878                  * Don't clear the framebuffer -- someone may have set
879                  * up a splash image.
880                  */
881         } else {
882                 /* alocate memory buffer */
883                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
884                 if (ret < 0) {
885                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
886                         goto stop_clk;
887                 }
888         }
889
890         /* LCDC registers */
891         info->fix.mmio_start = regs->start;
892         info->fix.mmio_len = regs->end - regs->start + 1;
893
894         if (!request_mem_region(info->fix.mmio_start,
895                                 info->fix.mmio_len, pdev->name)) {
896                 ret = -EBUSY;
897                 goto free_fb;
898         }
899
900         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
901         if (!sinfo->mmio) {
902                 dev_err(dev, "cannot map LCDC registers\n");
903                 goto release_mem;
904         }
905
906         /* Initialize PWM for contrast or backlight ("off") */
907         init_contrast(sinfo);
908
909         /* interrupt */
910         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
911         if (ret) {
912                 dev_err(dev, "request_irq failed: %d\n", ret);
913                 goto unmap_mmio;
914         }
915
916         /* Some operations on the LCDC might sleep and
917          * require a preemptible task context */
918         INIT_WORK(&sinfo->task, atmel_lcdfb_task);
919
920         ret = atmel_lcdfb_init_fbinfo(sinfo);
921         if (ret < 0) {
922                 dev_err(dev, "init fbinfo failed: %d\n", ret);
923                 goto unregister_irqs;
924         }
925
926         /*
927          * This makes sure that our colour bitfield
928          * descriptors are correctly initialised.
929          */
930         atmel_lcdfb_check_var(&info->var, info);
931
932         ret = fb_set_var(info, &info->var);
933         if (ret) {
934                 dev_warn(dev, "unable to set display parameters\n");
935                 goto free_cmap;
936         }
937
938         dev_set_drvdata(dev, info);
939
940         /*
941          * Tell the world that we're ready to go
942          */
943         ret = register_framebuffer(info);
944         if (ret < 0) {
945                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
946                 goto reset_drvdata;
947         }
948
949         /* add selected videomode to modelist */
950         fb_var_to_videomode(&fbmode, &info->var);
951         fb_add_videomode(&fbmode, &info->modelist);
952
953         /* Power up the LCDC screen */
954         if (sinfo->atmel_lcdfb_power_control)
955                 sinfo->atmel_lcdfb_power_control(1);
956
957         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
958                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
959
960         return 0;
961
962 reset_drvdata:
963         dev_set_drvdata(dev, NULL);
964 free_cmap:
965         fb_dealloc_cmap(&info->cmap);
966 unregister_irqs:
967         cancel_work_sync(&sinfo->task);
968         free_irq(sinfo->irq_base, info);
969 unmap_mmio:
970         exit_backlight(sinfo);
971         iounmap(sinfo->mmio);
972 release_mem:
973         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
974 free_fb:
975         if (map)
976                 iounmap(info->screen_base);
977         else
978                 atmel_lcdfb_free_video_memory(sinfo);
979
980 release_intmem:
981         if (map)
982                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
983 stop_clk:
984         atmel_lcdfb_stop_clock(sinfo);
985         clk_put(sinfo->lcdc_clk);
986 put_bus_clk:
987         if (sinfo->bus_clk)
988                 clk_put(sinfo->bus_clk);
989 free_info:
990         framebuffer_release(info);
991 out:
992         dev_dbg(dev, "%s FAILED\n", __func__);
993         return ret;
994 }
995
996 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
997 {
998         struct device *dev = &pdev->dev;
999         struct fb_info *info = dev_get_drvdata(dev);
1000         struct atmel_lcdfb_info *sinfo;
1001
1002         if (!info || !info->par)
1003                 return 0;
1004         sinfo = info->par;
1005
1006         cancel_work_sync(&sinfo->task);
1007         exit_backlight(sinfo);
1008         if (sinfo->atmel_lcdfb_power_control)
1009                 sinfo->atmel_lcdfb_power_control(0);
1010         unregister_framebuffer(info);
1011         atmel_lcdfb_stop_clock(sinfo);
1012         clk_put(sinfo->lcdc_clk);
1013         if (sinfo->bus_clk)
1014                 clk_put(sinfo->bus_clk);
1015         fb_dealloc_cmap(&info->cmap);
1016         free_irq(sinfo->irq_base, info);
1017         iounmap(sinfo->mmio);
1018         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1019         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
1020                 iounmap(info->screen_base);
1021                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1022         } else {
1023                 atmel_lcdfb_free_video_memory(sinfo);
1024         }
1025
1026         dev_set_drvdata(dev, NULL);
1027         framebuffer_release(info);
1028
1029         return 0;
1030 }
1031
1032 #ifdef CONFIG_PM
1033
1034 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
1035 {
1036         struct fb_info *info = platform_get_drvdata(pdev);
1037         struct atmel_lcdfb_info *sinfo = info->par;
1038
1039         /*
1040          * We don't want to handle interrupts while the clock is
1041          * stopped. It may take forever.
1042          */
1043         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
1044
1045         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
1046         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
1047         if (sinfo->atmel_lcdfb_power_control)
1048                 sinfo->atmel_lcdfb_power_control(0);
1049
1050         atmel_lcdfb_stop(sinfo);
1051         atmel_lcdfb_stop_clock(sinfo);
1052
1053         return 0;
1054 }
1055
1056 static int atmel_lcdfb_resume(struct platform_device *pdev)
1057 {
1058         struct fb_info *info = platform_get_drvdata(pdev);
1059         struct atmel_lcdfb_info *sinfo = info->par;
1060
1061         atmel_lcdfb_start_clock(sinfo);
1062         atmel_lcdfb_start(sinfo);
1063         if (sinfo->atmel_lcdfb_power_control)
1064                 sinfo->atmel_lcdfb_power_control(1);
1065         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
1066
1067         /* Enable FIFO & DMA errors */
1068         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
1069                         | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
1070
1071         return 0;
1072 }
1073
1074 #else
1075 #define atmel_lcdfb_suspend     NULL
1076 #define atmel_lcdfb_resume      NULL
1077 #endif
1078
1079 static struct platform_driver atmel_lcdfb_driver = {
1080         .remove         = __exit_p(atmel_lcdfb_remove),
1081         .suspend        = atmel_lcdfb_suspend,
1082         .resume         = atmel_lcdfb_resume,
1083
1084         .driver         = {
1085                 .name   = "atmel_lcdfb",
1086                 .owner  = THIS_MODULE,
1087         },
1088 };
1089
1090 static int __init atmel_lcdfb_init(void)
1091 {
1092         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
1093 }
1094
1095 static void __exit atmel_lcdfb_exit(void)
1096 {
1097         platform_driver_unregister(&atmel_lcdfb_driver);
1098 }
1099
1100 module_init(atmel_lcdfb_init);
1101 module_exit(atmel_lcdfb_exit);
1102
1103 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
1104 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
1105 MODULE_LICENSE("GPL");