USB: pxa2xx_udc: fix hardcoded irq number
[linux-2.6.git] / drivers / usb / gadget / pxa2xx_udc.c
1 /*
2  * linux/drivers/usb/gadget/pxa2xx_udc.c
3  * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
4  *
5  * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
6  * Copyright (C) 2003 Robert Schwebel, Pengutronix
7  * Copyright (C) 2003 Benedikt Spranger, Pengutronix
8  * Copyright (C) 2003 David Brownell
9  * Copyright (C) 2003 Joshua Wise
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
24  *
25  */
26
27 #undef  DEBUG
28 // #define      VERBOSE DBG_VERBOSE
29
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/ioport.h>
33 #include <linux/types.h>
34 #include <linux/errno.h>
35 #include <linux/delay.h>
36 #include <linux/slab.h>
37 #include <linux/init.h>
38 #include <linux/timer.h>
39 #include <linux/list.h>
40 #include <linux/interrupt.h>
41 #include <linux/proc_fs.h>
42 #include <linux/mm.h>
43 #include <linux/platform_device.h>
44 #include <linux/dma-mapping.h>
45 #include <linux/irq.h>
46
47 #include <asm/byteorder.h>
48 #include <asm/dma.h>
49 #include <asm/io.h>
50 #include <asm/system.h>
51 #include <asm/mach-types.h>
52 #include <asm/unaligned.h>
53 #include <asm/hardware.h>
54 #ifdef CONFIG_ARCH_PXA
55 #include <asm/arch/pxa-regs.h>
56 #endif
57
58 #include <linux/usb/ch9.h>
59 #include <linux/usb_gadget.h>
60
61 #include <asm/arch/udc.h>
62
63
64 /*
65  * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
66  * series processors.  The UDC for the IXP 4xx series is very similar.
67  * There are fifteen endpoints, in addition to ep0.
68  *
69  * Such controller drivers work with a gadget driver.  The gadget driver
70  * returns descriptors, implements configuration and data protocols used
71  * by the host to interact with this device, and allocates endpoints to
72  * the different protocol interfaces.  The controller driver virtualizes
73  * usb hardware so that the gadget drivers will be more portable.
74  *
75  * This UDC hardware wants to implement a bit too much USB protocol, so
76  * it constrains the sorts of USB configuration change events that work.
77  * The errata for these chips are misleading; some "fixed" bugs from
78  * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
79  */
80
81 #define DRIVER_VERSION  "4-May-2005"
82 #define DRIVER_DESC     "PXA 25x USB Device Controller driver"
83
84
85 static const char driver_name [] = "pxa2xx_udc";
86
87 static const char ep0name [] = "ep0";
88
89
90 // #define      USE_DMA
91 // #define      USE_OUT_DMA
92 // #define      DISABLE_TEST_MODE
93
94 #ifdef CONFIG_ARCH_IXP4XX
95 #undef USE_DMA
96
97 /* cpu-specific register addresses are compiled in to this code */
98 #ifdef CONFIG_ARCH_PXA
99 #error "Can't configure both IXP and PXA"
100 #endif
101
102 #endif
103
104 #include "pxa2xx_udc.h"
105
106
107 #ifdef  USE_DMA
108 static int use_dma = 1;
109 module_param(use_dma, bool, 0);
110 MODULE_PARM_DESC (use_dma, "true to use dma");
111
112 static void dma_nodesc_handler (int dmach, void *_ep);
113 static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
114
115 #ifdef USE_OUT_DMA
116 #define DMASTR " (dma support)"
117 #else
118 #define DMASTR " (dma in)"
119 #endif
120
121 #else   /* !USE_DMA */
122 #define DMASTR " (pio only)"
123 #undef  USE_OUT_DMA
124 #endif
125
126 #ifdef  CONFIG_USB_PXA2XX_SMALL
127 #define SIZE_STR        " (small)"
128 #else
129 #define SIZE_STR        ""
130 #endif
131
132 #ifdef DISABLE_TEST_MODE
133 /* (mode == 0) == no undocumented chip tweaks
134  * (mode & 1)  == double buffer bulk IN
135  * (mode & 2)  == double buffer bulk OUT
136  * ... so mode = 3 (or 7, 15, etc) does it for both
137  */
138 static ushort fifo_mode = 0;
139 module_param(fifo_mode, ushort, 0);
140 MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
141 #endif
142
143 /* ---------------------------------------------------------------------------
144  *      endpoint related parts of the api to the usb controller hardware,
145  *      used by gadget driver; and the inner talker-to-hardware core.
146  * ---------------------------------------------------------------------------
147  */
148
149 static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
150 static void nuke (struct pxa2xx_ep *, int status);
151
152 /* one GPIO should be used to detect VBUS from the host */
153 static int is_vbus_present(void)
154 {
155         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
156
157         if (mach->gpio_vbus)
158                 return udc_gpio_get(mach->gpio_vbus);
159         if (mach->udc_is_connected)
160                 return mach->udc_is_connected();
161         return 1;
162 }
163
164 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
165 static void pullup_off(void)
166 {
167         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
168
169         if (mach->gpio_pullup)
170                 udc_gpio_set(mach->gpio_pullup, 0);
171         else if (mach->udc_command)
172                 mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
173 }
174
175 static void pullup_on(void)
176 {
177         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
178
179         if (mach->gpio_pullup)
180                 udc_gpio_set(mach->gpio_pullup, 1);
181         else if (mach->udc_command)
182                 mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
183 }
184
185 static void pio_irq_enable(int bEndpointAddress)
186 {
187         bEndpointAddress &= 0xf;
188         if (bEndpointAddress < 8)
189                 UICR0 &= ~(1 << bEndpointAddress);
190         else {
191                 bEndpointAddress -= 8;
192                 UICR1 &= ~(1 << bEndpointAddress);
193         }
194 }
195
196 static void pio_irq_disable(int bEndpointAddress)
197 {
198         bEndpointAddress &= 0xf;
199         if (bEndpointAddress < 8)
200                 UICR0 |= 1 << bEndpointAddress;
201         else {
202                 bEndpointAddress -= 8;
203                 UICR1 |= 1 << bEndpointAddress;
204         }
205 }
206
207 /* The UDCCR reg contains mask and interrupt status bits,
208  * so using '|=' isn't safe as it may ack an interrupt.
209  */
210 #define UDCCR_MASK_BITS         (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
211
212 static inline void udc_set_mask_UDCCR(int mask)
213 {
214         UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
215 }
216
217 static inline void udc_clear_mask_UDCCR(int mask)
218 {
219         UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
220 }
221
222 static inline void udc_ack_int_UDCCR(int mask)
223 {
224         /* udccr contains the bits we dont want to change */
225         __u32 udccr = UDCCR & UDCCR_MASK_BITS;
226
227         UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
228 }
229
230 /*
231  * endpoint enable/disable
232  *
233  * we need to verify the descriptors used to enable endpoints.  since pxa2xx
234  * endpoint configurations are fixed, and are pretty much always enabled,
235  * there's not a lot to manage here.
236  *
237  * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
238  * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
239  * for a single interface (with only the default altsetting) and for gadget
240  * drivers that don't halt endpoints (not reset by set_interface).  that also
241  * means that if you use ISO, you must violate the USB spec rule that all
242  * iso endpoints must be in non-default altsettings.
243  */
244 static int pxa2xx_ep_enable (struct usb_ep *_ep,
245                 const struct usb_endpoint_descriptor *desc)
246 {
247         struct pxa2xx_ep        *ep;
248         struct pxa2xx_udc       *dev;
249
250         ep = container_of (_ep, struct pxa2xx_ep, ep);
251         if (!_ep || !desc || ep->desc || _ep->name == ep0name
252                         || desc->bDescriptorType != USB_DT_ENDPOINT
253                         || ep->bEndpointAddress != desc->bEndpointAddress
254                         || ep->fifo_size < le16_to_cpu
255                                                 (desc->wMaxPacketSize)) {
256                 DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
257                 return -EINVAL;
258         }
259
260         /* xfer types must match, except that interrupt ~= bulk */
261         if (ep->bmAttributes != desc->bmAttributes
262                         && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
263                         && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
264                 DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
265                 return -EINVAL;
266         }
267
268         /* hardware _could_ do smaller, but driver doesn't */
269         if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
270                                 && le16_to_cpu (desc->wMaxPacketSize)
271                                                 != BULK_FIFO_SIZE)
272                         || !desc->wMaxPacketSize) {
273                 DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
274                 return -ERANGE;
275         }
276
277         dev = ep->dev;
278         if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
279                 DMSG("%s, bogus device state\n", __FUNCTION__);
280                 return -ESHUTDOWN;
281         }
282
283         ep->desc = desc;
284         ep->dma = -1;
285         ep->stopped = 0;
286         ep->pio_irqs = ep->dma_irqs = 0;
287         ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
288
289         /* flush fifo (mostly for OUT buffers) */
290         pxa2xx_ep_fifo_flush (_ep);
291
292         /* ... reset halt state too, if we could ... */
293
294 #ifdef  USE_DMA
295         /* for (some) bulk and ISO endpoints, try to get a DMA channel and
296          * bind it to the endpoint.  otherwise use PIO.
297          */
298         switch (ep->bmAttributes) {
299         case USB_ENDPOINT_XFER_ISOC:
300                 if (le16_to_cpu(desc->wMaxPacketSize) % 32)
301                         break;
302                 // fall through
303         case USB_ENDPOINT_XFER_BULK:
304                 if (!use_dma || !ep->reg_drcmr)
305                         break;
306                 ep->dma = pxa_request_dma ((char *)_ep->name,
307                                 (le16_to_cpu (desc->wMaxPacketSize) > 64)
308                                         ? DMA_PRIO_MEDIUM /* some iso */
309                                         : DMA_PRIO_LOW,
310                                 dma_nodesc_handler, ep);
311                 if (ep->dma >= 0) {
312                         *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
313                         DMSG("%s using dma%d\n", _ep->name, ep->dma);
314                 }
315         }
316 #endif
317
318         DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
319         return 0;
320 }
321
322 static int pxa2xx_ep_disable (struct usb_ep *_ep)
323 {
324         struct pxa2xx_ep        *ep;
325         unsigned long           flags;
326
327         ep = container_of (_ep, struct pxa2xx_ep, ep);
328         if (!_ep || !ep->desc) {
329                 DMSG("%s, %s not enabled\n", __FUNCTION__,
330                         _ep ? ep->ep.name : NULL);
331                 return -EINVAL;
332         }
333         local_irq_save(flags);
334
335         nuke (ep, -ESHUTDOWN);
336
337 #ifdef  USE_DMA
338         if (ep->dma >= 0) {
339                 *ep->reg_drcmr = 0;
340                 pxa_free_dma (ep->dma);
341                 ep->dma = -1;
342         }
343 #endif
344
345         /* flush fifo (mostly for IN buffers) */
346         pxa2xx_ep_fifo_flush (_ep);
347
348         ep->desc = NULL;
349         ep->stopped = 1;
350
351         local_irq_restore(flags);
352         DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
353         return 0;
354 }
355
356 /*-------------------------------------------------------------------------*/
357
358 /* for the pxa2xx, these can just wrap kmalloc/kfree.  gadget drivers
359  * must still pass correctly initialized endpoints, since other controller
360  * drivers may care about how it's currently set up (dma issues etc).
361  */
362
363 /*
364  *      pxa2xx_ep_alloc_request - allocate a request data structure
365  */
366 static struct usb_request *
367 pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
368 {
369         struct pxa2xx_request *req;
370
371         req = kzalloc(sizeof(*req), gfp_flags);
372         if (!req)
373                 return NULL;
374
375         INIT_LIST_HEAD (&req->queue);
376         return &req->req;
377 }
378
379
380 /*
381  *      pxa2xx_ep_free_request - deallocate a request data structure
382  */
383 static void
384 pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
385 {
386         struct pxa2xx_request   *req;
387
388         req = container_of (_req, struct pxa2xx_request, req);
389         WARN_ON (!list_empty (&req->queue));
390         kfree(req);
391 }
392
393
394 /* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
395  * no device-affinity and the heap works perfectly well for i/o buffers.
396  * It wastes much less memory than dma_alloc_coherent() would, and even
397  * prevents cacheline (32 bytes wide) sharing problems.
398  */
399 static void *
400 pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
401         dma_addr_t *dma, gfp_t gfp_flags)
402 {
403         char                    *retval;
404
405         retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
406         if (retval)
407 #ifdef  USE_DMA
408                 *dma = virt_to_bus (retval);
409 #else
410                 *dma = (dma_addr_t)~0;
411 #endif
412         return retval;
413 }
414
415 static void
416 pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
417                 unsigned bytes)
418 {
419         kfree (buf);
420 }
421
422 /*-------------------------------------------------------------------------*/
423
424 /*
425  *      done - retire a request; caller blocked irqs
426  */
427 static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
428 {
429         unsigned                stopped = ep->stopped;
430
431         list_del_init(&req->queue);
432
433         if (likely (req->req.status == -EINPROGRESS))
434                 req->req.status = status;
435         else
436                 status = req->req.status;
437
438         if (status && status != -ESHUTDOWN)
439                 DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
440                         ep->ep.name, &req->req, status,
441                         req->req.actual, req->req.length);
442
443         /* don't modify queue heads during completion callback */
444         ep->stopped = 1;
445         req->req.complete(&ep->ep, &req->req);
446         ep->stopped = stopped;
447 }
448
449
450 static inline void ep0_idle (struct pxa2xx_udc *dev)
451 {
452         dev->ep0state = EP0_IDLE;
453 }
454
455 static int
456 write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
457 {
458         u8              *buf;
459         unsigned        length, count;
460
461         buf = req->req.buf + req->req.actual;
462         prefetch(buf);
463
464         /* how big will this packet be? */
465         length = min(req->req.length - req->req.actual, max);
466         req->req.actual += length;
467
468         count = length;
469         while (likely(count--))
470                 *uddr = *buf++;
471
472         return length;
473 }
474
475 /*
476  * write to an IN endpoint fifo, as many packets as possible.
477  * irqs will use this to write the rest later.
478  * caller guarantees at least one packet buffer is ready (or a zlp).
479  */
480 static int
481 write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
482 {
483         unsigned                max;
484
485         max = le16_to_cpu(ep->desc->wMaxPacketSize);
486         do {
487                 unsigned        count;
488                 int             is_last, is_short;
489
490                 count = write_packet(ep->reg_uddr, req, max);
491
492                 /* last packet is usually short (or a zlp) */
493                 if (unlikely (count != max))
494                         is_last = is_short = 1;
495                 else {
496                         if (likely(req->req.length != req->req.actual)
497                                         || req->req.zero)
498                                 is_last = 0;
499                         else
500                                 is_last = 1;
501                         /* interrupt/iso maxpacket may not fill the fifo */
502                         is_short = unlikely (max < ep->fifo_size);
503                 }
504
505                 DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
506                         ep->ep.name, count,
507                         is_last ? "/L" : "", is_short ? "/S" : "",
508                         req->req.length - req->req.actual, req);
509
510                 /* let loose that packet. maybe try writing another one,
511                  * double buffering might work.  TSP, TPC, and TFS
512                  * bit values are the same for all normal IN endpoints.
513                  */
514                 *ep->reg_udccs = UDCCS_BI_TPC;
515                 if (is_short)
516                         *ep->reg_udccs = UDCCS_BI_TSP;
517
518                 /* requests complete when all IN data is in the FIFO */
519                 if (is_last) {
520                         done (ep, req, 0);
521                         if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
522                                 pio_irq_disable (ep->bEndpointAddress);
523 #ifdef USE_DMA
524                                 /* unaligned data and zlps couldn't use dma */
525                                 if (unlikely(!list_empty(&ep->queue))) {
526                                         req = list_entry(ep->queue.next,
527                                                 struct pxa2xx_request, queue);
528                                         kick_dma(ep,req);
529                                         return 0;
530                                 }
531 #endif
532                         }
533                         return 1;
534                 }
535
536                 // TODO experiment: how robust can fifo mode tweaking be?
537                 // double buffering is off in the default fifo mode, which
538                 // prevents TFS from being set here.
539
540         } while (*ep->reg_udccs & UDCCS_BI_TFS);
541         return 0;
542 }
543
544 /* caller asserts req->pending (ep0 irq status nyet cleared); starts
545  * ep0 data stage.  these chips want very simple state transitions.
546  */
547 static inline
548 void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
549 {
550         UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
551         USIR0 = USIR0_IR0;
552         dev->req_pending = 0;
553         DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
554                 __FUNCTION__, tag, UDCCS0, flags);
555 }
556
557 static int
558 write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
559 {
560         unsigned        count;
561         int             is_short;
562
563         count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
564         ep->dev->stats.write.bytes += count;
565
566         /* last packet "must be" short (or a zlp) */
567         is_short = (count != EP0_FIFO_SIZE);
568
569         DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
570                 req->req.length - req->req.actual, req);
571
572         if (unlikely (is_short)) {
573                 if (ep->dev->req_pending)
574                         ep0start(ep->dev, UDCCS0_IPR, "short IN");
575                 else
576                         UDCCS0 = UDCCS0_IPR;
577
578                 count = req->req.length;
579                 done (ep, req, 0);
580                 ep0_idle(ep->dev);
581 #ifndef CONFIG_ARCH_IXP4XX
582 #if 1
583                 /* This seems to get rid of lost status irqs in some cases:
584                  * host responds quickly, or next request involves config
585                  * change automagic, or should have been hidden, or ...
586                  *
587                  * FIXME get rid of all udelays possible...
588                  */
589                 if (count >= EP0_FIFO_SIZE) {
590                         count = 100;
591                         do {
592                                 if ((UDCCS0 & UDCCS0_OPR) != 0) {
593                                         /* clear OPR, generate ack */
594                                         UDCCS0 = UDCCS0_OPR;
595                                         break;
596                                 }
597                                 count--;
598                                 udelay(1);
599                         } while (count);
600                 }
601 #endif
602 #endif
603         } else if (ep->dev->req_pending)
604                 ep0start(ep->dev, 0, "IN");
605         return is_short;
606 }
607
608
609 /*
610  * read_fifo -  unload packet(s) from the fifo we use for usb OUT
611  * transfers and put them into the request.  caller should have made
612  * sure there's at least one packet ready.
613  *
614  * returns true if the request completed because of short packet or the
615  * request buffer having filled (and maybe overran till end-of-packet).
616  */
617 static int
618 read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
619 {
620         for (;;) {
621                 u32             udccs;
622                 u8              *buf;
623                 unsigned        bufferspace, count, is_short;
624
625                 /* make sure there's a packet in the FIFO.
626                  * UDCCS_{BO,IO}_RPC are all the same bit value.
627                  * UDCCS_{BO,IO}_RNE are all the same bit value.
628                  */
629                 udccs = *ep->reg_udccs;
630                 if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
631                         break;
632                 buf = req->req.buf + req->req.actual;
633                 prefetchw(buf);
634                 bufferspace = req->req.length - req->req.actual;
635
636                 /* read all bytes from this packet */
637                 if (likely (udccs & UDCCS_BO_RNE)) {
638                         count = 1 + (0x0ff & *ep->reg_ubcr);
639                         req->req.actual += min (count, bufferspace);
640                 } else /* zlp */
641                         count = 0;
642                 is_short = (count < ep->ep.maxpacket);
643                 DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
644                         ep->ep.name, udccs, count,
645                         is_short ? "/S" : "",
646                         req, req->req.actual, req->req.length);
647                 while (likely (count-- != 0)) {
648                         u8      byte = (u8) *ep->reg_uddr;
649
650                         if (unlikely (bufferspace == 0)) {
651                                 /* this happens when the driver's buffer
652                                  * is smaller than what the host sent.
653                                  * discard the extra data.
654                                  */
655                                 if (req->req.status != -EOVERFLOW)
656                                         DMSG("%s overflow %d\n",
657                                                 ep->ep.name, count);
658                                 req->req.status = -EOVERFLOW;
659                         } else {
660                                 *buf++ = byte;
661                                 bufferspace--;
662                         }
663                 }
664                 *ep->reg_udccs =  UDCCS_BO_RPC;
665                 /* RPC/RSP/RNE could now reflect the other packet buffer */
666
667                 /* iso is one request per packet */
668                 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
669                         if (udccs & UDCCS_IO_ROF)
670                                 req->req.status = -EHOSTUNREACH;
671                         /* more like "is_done" */
672                         is_short = 1;
673                 }
674
675                 /* completion */
676                 if (is_short || req->req.actual == req->req.length) {
677                         done (ep, req, 0);
678                         if (list_empty(&ep->queue))
679                                 pio_irq_disable (ep->bEndpointAddress);
680                         return 1;
681                 }
682
683                 /* finished that packet.  the next one may be waiting... */
684         }
685         return 0;
686 }
687
688 /*
689  * special ep0 version of the above.  no UBCR0 or double buffering; status
690  * handshaking is magic.  most device protocols don't need control-OUT.
691  * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
692  * protocols do use them.
693  */
694 static int
695 read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
696 {
697         u8              *buf, byte;
698         unsigned        bufferspace;
699
700         buf = req->req.buf + req->req.actual;
701         bufferspace = req->req.length - req->req.actual;
702
703         while (UDCCS0 & UDCCS0_RNE) {
704                 byte = (u8) UDDR0;
705
706                 if (unlikely (bufferspace == 0)) {
707                         /* this happens when the driver's buffer
708                          * is smaller than what the host sent.
709                          * discard the extra data.
710                          */
711                         if (req->req.status != -EOVERFLOW)
712                                 DMSG("%s overflow\n", ep->ep.name);
713                         req->req.status = -EOVERFLOW;
714                 } else {
715                         *buf++ = byte;
716                         req->req.actual++;
717                         bufferspace--;
718                 }
719         }
720
721         UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
722
723         /* completion */
724         if (req->req.actual >= req->req.length)
725                 return 1;
726
727         /* finished that packet.  the next one may be waiting... */
728         return 0;
729 }
730
731 #ifdef  USE_DMA
732
733 #define MAX_IN_DMA      ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
734
735 static void
736 start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in)
737 {
738         u32     dcmd = req->req.length;
739         u32     buf = req->req.dma;
740         u32     fifo = io_v2p ((u32)ep->reg_uddr);
741
742         /* caller guarantees there's a packet or more remaining
743          *  - IN may end with a short packet (TSP set separately),
744          *  - OUT is always full length
745          */
746         buf += req->req.actual;
747         dcmd -= req->req.actual;
748         ep->dma_fixup = 0;
749
750         /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
751         DCSR(ep->dma) = DCSR_NODESC;
752         if (is_in) {
753                 DSADR(ep->dma) = buf;
754                 DTADR(ep->dma) = fifo;
755                 if (dcmd > MAX_IN_DMA)
756                         dcmd = MAX_IN_DMA;
757                 else
758                         ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0;
759                 dcmd |= DCMD_BURST32 | DCMD_WIDTH1
760                         | DCMD_FLOWTRG | DCMD_INCSRCADDR;
761         } else {
762 #ifdef USE_OUT_DMA
763                 DSADR(ep->dma) = fifo;
764                 DTADR(ep->dma) = buf;
765                 if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
766                         dcmd = ep->ep.maxpacket;
767                 dcmd |= DCMD_BURST32 | DCMD_WIDTH1
768                         | DCMD_FLOWSRC | DCMD_INCTRGADDR;
769 #endif
770         }
771         DCMD(ep->dma) = dcmd;
772         DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC
773                 | (unlikely(is_in)
774                         ? DCSR_STOPIRQEN        /* use dma_nodesc_handler() */
775                         : 0);                   /* use handle_ep() */
776 }
777
778 static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req)
779 {
780         int     is_in = ep->bEndpointAddress & USB_DIR_IN;
781
782         if (is_in) {
783                 /* unaligned tx buffers and zlps only work with PIO */
784                 if ((req->req.dma & 0x0f) != 0
785                                 || unlikely((req->req.length - req->req.actual)
786                                                 == 0)) {
787                         pio_irq_enable(ep->bEndpointAddress);
788                         if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0)
789                                 (void) write_fifo(ep, req);
790                 } else {
791                         start_dma_nodesc(ep, req, USB_DIR_IN);
792                 }
793         } else {
794                 if ((req->req.length - req->req.actual) < ep->ep.maxpacket) {
795                         DMSG("%s short dma read...\n", ep->ep.name);
796                         /* we're always set up for pio out */
797                         read_fifo (ep, req);
798                 } else {
799                         *ep->reg_udccs = UDCCS_BO_DME
800                                 | (*ep->reg_udccs & UDCCS_BO_FST);
801                         start_dma_nodesc(ep, req, USB_DIR_OUT);
802                 }
803         }
804 }
805
806 static void cancel_dma(struct pxa2xx_ep *ep)
807 {
808         struct pxa2xx_request   *req;
809         u32                     tmp;
810
811         if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
812                 return;
813
814         DCSR(ep->dma) = 0;
815         while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
816                 cpu_relax();
817
818         req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
819         tmp = DCMD(ep->dma) & DCMD_LENGTH;
820         req->req.actual = req->req.length - (tmp & DCMD_LENGTH);
821
822         /* the last tx packet may be incomplete, so flush the fifo.
823          * FIXME correct req.actual if we can
824          */
825         if (ep->bEndpointAddress & USB_DIR_IN)
826                 *ep->reg_udccs = UDCCS_BI_FTF;
827 }
828
829 /* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
830 static void dma_nodesc_handler(int dmach, void *_ep)
831 {
832         struct pxa2xx_ep        *ep = _ep;
833         struct pxa2xx_request   *req;
834         u32                     tmp, completed;
835
836         local_irq_disable();
837
838         req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
839
840         ep->dma_irqs++;
841         ep->dev->stats.irqs++;
842         HEX_DISPLAY(ep->dev->stats.irqs);
843
844         /* ack/clear */
845         tmp = DCSR(ep->dma);
846         DCSR(ep->dma) = tmp;
847         if ((tmp & DCSR_STOPSTATE) == 0
848                         || (DDADR(ep->dma) & DDADR_STOP) != 0) {
849                 DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n",
850                         ep->ep.name, DCSR(ep->dma), DDADR(ep->dma));
851                 goto done;
852         }
853         DCSR(ep->dma) = 0;      /* clear DCSR_STOPSTATE */
854
855         /* update transfer status */
856         completed = tmp & DCSR_BUSERR;
857         if (ep->bEndpointAddress & USB_DIR_IN)
858                 tmp = DSADR(ep->dma);
859         else
860                 tmp = DTADR(ep->dma);
861         req->req.actual = tmp - req->req.dma;
862
863         /* FIXME seems we sometimes see partial transfers... */
864
865         if (unlikely(completed != 0))
866                 req->req.status = -EIO;
867         else if (req->req.actual) {
868                 /* these registers have zeroes in low bits; they miscount
869                  * some (end-of-transfer) short packets:  tx 14 as tx 12
870                  */
871                 if (ep->dma_fixup)
872                         req->req.actual = min(req->req.actual + 3,
873                                                 req->req.length);
874
875                 tmp = (req->req.length - req->req.actual);
876                 completed = (tmp == 0);
877                 if (completed && (ep->bEndpointAddress & USB_DIR_IN)) {
878
879                         /* maybe validate final short packet ... */
880                         if ((req->req.actual % ep->ep.maxpacket) != 0)
881                                 *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/;
882
883                         /* ... or zlp, using pio fallback */
884                         else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK
885                                         && req->req.zero) {
886                                 DMSG("%s zlp terminate ...\n", ep->ep.name);
887                                 completed = 0;
888                         }
889                 }
890         }
891
892         if (likely(completed)) {
893                 done(ep, req, 0);
894
895                 /* maybe re-activate after completion */
896                 if (ep->stopped || list_empty(&ep->queue))
897                         goto done;
898                 req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
899         }
900         kick_dma(ep, req);
901 done:
902         local_irq_enable();
903 }
904
905 #endif
906
907 /*-------------------------------------------------------------------------*/
908
909 static int
910 pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
911 {
912         struct pxa2xx_request   *req;
913         struct pxa2xx_ep        *ep;
914         struct pxa2xx_udc       *dev;
915         unsigned long           flags;
916
917         req = container_of(_req, struct pxa2xx_request, req);
918         if (unlikely (!_req || !_req->complete || !_req->buf
919                         || !list_empty(&req->queue))) {
920                 DMSG("%s, bad params\n", __FUNCTION__);
921                 return -EINVAL;
922         }
923
924         ep = container_of(_ep, struct pxa2xx_ep, ep);
925         if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
926                 DMSG("%s, bad ep\n", __FUNCTION__);
927                 return -EINVAL;
928         }
929
930         dev = ep->dev;
931         if (unlikely (!dev->driver
932                         || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
933                 DMSG("%s, bogus device state\n", __FUNCTION__);
934                 return -ESHUTDOWN;
935         }
936
937         /* iso is always one packet per request, that's the only way
938          * we can report per-packet status.  that also helps with dma.
939          */
940         if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
941                         && req->req.length > le16_to_cpu
942                                                 (ep->desc->wMaxPacketSize)))
943                 return -EMSGSIZE;
944
945 #ifdef  USE_DMA
946         // FIXME caller may already have done the dma mapping
947         if (ep->dma >= 0) {
948                 _req->dma = dma_map_single(dev->dev,
949                         _req->buf, _req->length,
950                         ((ep->bEndpointAddress & USB_DIR_IN) != 0)
951                                 ? DMA_TO_DEVICE
952                                 : DMA_FROM_DEVICE);
953         }
954 #endif
955
956         DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
957              _ep->name, _req, _req->length, _req->buf);
958
959         local_irq_save(flags);
960
961         _req->status = -EINPROGRESS;
962         _req->actual = 0;
963
964         /* kickstart this i/o queue? */
965         if (list_empty(&ep->queue) && !ep->stopped) {
966                 if (ep->desc == 0 /* ep0 */) {
967                         unsigned        length = _req->length;
968
969                         switch (dev->ep0state) {
970                         case EP0_IN_DATA_PHASE:
971                                 dev->stats.write.ops++;
972                                 if (write_ep0_fifo(ep, req))
973                                         req = NULL;
974                                 break;
975
976                         case EP0_OUT_DATA_PHASE:
977                                 dev->stats.read.ops++;
978                                 /* messy ... */
979                                 if (dev->req_config) {
980                                         DBG(DBG_VERBOSE, "ep0 config ack%s\n",
981                                                 dev->has_cfr ?  "" : " raced");
982                                         if (dev->has_cfr)
983                                                 UDCCFR = UDCCFR_AREN|UDCCFR_ACM
984                                                         |UDCCFR_MB1;
985                                         done(ep, req, 0);
986                                         dev->ep0state = EP0_END_XFER;
987                                         local_irq_restore (flags);
988                                         return 0;
989                                 }
990                                 if (dev->req_pending)
991                                         ep0start(dev, UDCCS0_IPR, "OUT");
992                                 if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
993                                                 && read_ep0_fifo(ep, req))) {
994                                         ep0_idle(dev);
995                                         done(ep, req, 0);
996                                         req = NULL;
997                                 }
998                                 break;
999
1000                         default:
1001                                 DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
1002                                 local_irq_restore (flags);
1003                                 return -EL2HLT;
1004                         }
1005 #ifdef  USE_DMA
1006                 /* either start dma or prime pio pump */
1007                 } else if (ep->dma >= 0) {
1008                         kick_dma(ep, req);
1009 #endif
1010                 /* can the FIFO can satisfy the request immediately? */
1011                 } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
1012                         if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
1013                                         && write_fifo(ep, req))
1014                                 req = NULL;
1015                 } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
1016                                 && read_fifo(ep, req)) {
1017                         req = NULL;
1018                 }
1019
1020                 if (likely (req && ep->desc) && ep->dma < 0)
1021                         pio_irq_enable(ep->bEndpointAddress);
1022         }
1023
1024         /* pio or dma irq handler advances the queue. */
1025         if (likely (req != 0))
1026                 list_add_tail(&req->queue, &ep->queue);
1027         local_irq_restore(flags);
1028
1029         return 0;
1030 }
1031
1032
1033 /*
1034  *      nuke - dequeue ALL requests
1035  */
1036 static void nuke(struct pxa2xx_ep *ep, int status)
1037 {
1038         struct pxa2xx_request *req;
1039
1040         /* called with irqs blocked */
1041 #ifdef  USE_DMA
1042         if (ep->dma >= 0 && !ep->stopped)
1043                 cancel_dma(ep);
1044 #endif
1045         while (!list_empty(&ep->queue)) {
1046                 req = list_entry(ep->queue.next,
1047                                 struct pxa2xx_request,
1048                                 queue);
1049                 done(ep, req, status);
1050         }
1051         if (ep->desc)
1052                 pio_irq_disable (ep->bEndpointAddress);
1053 }
1054
1055
1056 /* dequeue JUST ONE request */
1057 static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
1058 {
1059         struct pxa2xx_ep        *ep;
1060         struct pxa2xx_request   *req;
1061         unsigned long           flags;
1062
1063         ep = container_of(_ep, struct pxa2xx_ep, ep);
1064         if (!_ep || ep->ep.name == ep0name)
1065                 return -EINVAL;
1066
1067         local_irq_save(flags);
1068
1069         /* make sure it's actually queued on this endpoint */
1070         list_for_each_entry (req, &ep->queue, queue) {
1071                 if (&req->req == _req)
1072                         break;
1073         }
1074         if (&req->req != _req) {
1075                 local_irq_restore(flags);
1076                 return -EINVAL;
1077         }
1078
1079 #ifdef  USE_DMA
1080         if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
1081                 cancel_dma(ep);
1082                 done(ep, req, -ECONNRESET);
1083                 /* restart i/o */
1084                 if (!list_empty(&ep->queue)) {
1085                         req = list_entry(ep->queue.next,
1086                                         struct pxa2xx_request, queue);
1087                         kick_dma(ep, req);
1088                 }
1089         } else
1090 #endif
1091                 done(ep, req, -ECONNRESET);
1092
1093         local_irq_restore(flags);
1094         return 0;
1095 }
1096
1097 /*-------------------------------------------------------------------------*/
1098
1099 static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
1100 {
1101         struct pxa2xx_ep        *ep;
1102         unsigned long           flags;
1103
1104         ep = container_of(_ep, struct pxa2xx_ep, ep);
1105         if (unlikely (!_ep
1106                         || (!ep->desc && ep->ep.name != ep0name))
1107                         || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
1108                 DMSG("%s, bad ep\n", __FUNCTION__);
1109                 return -EINVAL;
1110         }
1111         if (value == 0) {
1112                 /* this path (reset toggle+halt) is needed to implement
1113                  * SET_INTERFACE on normal hardware.  but it can't be
1114                  * done from software on the PXA UDC, and the hardware
1115                  * forgets to do it as part of SET_INTERFACE automagic.
1116                  */
1117                 DMSG("only host can clear %s halt\n", _ep->name);
1118                 return -EROFS;
1119         }
1120
1121         local_irq_save(flags);
1122
1123         if ((ep->bEndpointAddress & USB_DIR_IN) != 0
1124                         && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
1125                            || !list_empty(&ep->queue))) {
1126                 local_irq_restore(flags);
1127                 return -EAGAIN;
1128         }
1129
1130         /* FST bit is the same for control, bulk in, bulk out, interrupt in */
1131         *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
1132
1133         /* ep0 needs special care */
1134         if (!ep->desc) {
1135                 start_watchdog(ep->dev);
1136                 ep->dev->req_pending = 0;
1137                 ep->dev->ep0state = EP0_STALL;
1138
1139         /* and bulk/intr endpoints like dropping stalls too */
1140         } else {
1141                 unsigned i;
1142                 for (i = 0; i < 1000; i += 20) {
1143                         if (*ep->reg_udccs & UDCCS_BI_SST)
1144                                 break;
1145                         udelay(20);
1146                 }
1147         }
1148         local_irq_restore(flags);
1149
1150         DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
1151         return 0;
1152 }
1153
1154 static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
1155 {
1156         struct pxa2xx_ep        *ep;
1157
1158         ep = container_of(_ep, struct pxa2xx_ep, ep);
1159         if (!_ep) {
1160                 DMSG("%s, bad ep\n", __FUNCTION__);
1161                 return -ENODEV;
1162         }
1163         /* pxa can't report unclaimed bytes from IN fifos */
1164         if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
1165                 return -EOPNOTSUPP;
1166         if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
1167                         || (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
1168                 return 0;
1169         else
1170                 return (*ep->reg_ubcr & 0xfff) + 1;
1171 }
1172
1173 static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
1174 {
1175         struct pxa2xx_ep        *ep;
1176
1177         ep = container_of(_ep, struct pxa2xx_ep, ep);
1178         if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
1179                 DMSG("%s, bad ep\n", __FUNCTION__);
1180                 return;
1181         }
1182
1183         /* toggle and halt bits stay unchanged */
1184
1185         /* for OUT, just read and discard the FIFO contents. */
1186         if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
1187                 while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
1188                         (void) *ep->reg_uddr;
1189                 return;
1190         }
1191
1192         /* most IN status is the same, but ISO can't stall */
1193         *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
1194                 | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
1195                         ? 0 : UDCCS_BI_SST;
1196 }
1197
1198
1199 static struct usb_ep_ops pxa2xx_ep_ops = {
1200         .enable         = pxa2xx_ep_enable,
1201         .disable        = pxa2xx_ep_disable,
1202
1203         .alloc_request  = pxa2xx_ep_alloc_request,
1204         .free_request   = pxa2xx_ep_free_request,
1205
1206         .alloc_buffer   = pxa2xx_ep_alloc_buffer,
1207         .free_buffer    = pxa2xx_ep_free_buffer,
1208
1209         .queue          = pxa2xx_ep_queue,
1210         .dequeue        = pxa2xx_ep_dequeue,
1211
1212         .set_halt       = pxa2xx_ep_set_halt,
1213         .fifo_status    = pxa2xx_ep_fifo_status,
1214         .fifo_flush     = pxa2xx_ep_fifo_flush,
1215 };
1216
1217
1218 /* ---------------------------------------------------------------------------
1219  *      device-scoped parts of the api to the usb controller hardware
1220  * ---------------------------------------------------------------------------
1221  */
1222
1223 static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
1224 {
1225         return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
1226 }
1227
1228 static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
1229 {
1230         /* host may not have enabled remote wakeup */
1231         if ((UDCCS0 & UDCCS0_DRWF) == 0)
1232                 return -EHOSTUNREACH;
1233         udc_set_mask_UDCCR(UDCCR_RSM);
1234         return 0;
1235 }
1236
1237 static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
1238 static void udc_enable (struct pxa2xx_udc *);
1239 static void udc_disable(struct pxa2xx_udc *);
1240
1241 /* We disable the UDC -- and its 48 MHz clock -- whenever it's not
1242  * in active use.
1243  */
1244 static int pullup(struct pxa2xx_udc *udc, int is_active)
1245 {
1246         is_active = is_active && udc->vbus && udc->pullup;
1247         DMSG("%s\n", is_active ? "active" : "inactive");
1248         if (is_active)
1249                 udc_enable(udc);
1250         else {
1251                 if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
1252                         DMSG("disconnect %s\n", udc->driver
1253                                 ? udc->driver->driver.name
1254                                 : "(no driver)");
1255                         stop_activity(udc, udc->driver);
1256                 }
1257                 udc_disable(udc);
1258         }
1259         return 0;
1260 }
1261
1262 /* VBUS reporting logically comes from a transceiver */
1263 static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1264 {
1265         struct pxa2xx_udc       *udc;
1266
1267         udc = container_of(_gadget, struct pxa2xx_udc, gadget);
1268         udc->vbus = is_active = (is_active != 0);
1269         DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
1270         pullup(udc, is_active);
1271         return 0;
1272 }
1273
1274 /* drivers may have software control over D+ pullup */
1275 static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
1276 {
1277         struct pxa2xx_udc       *udc;
1278
1279         udc = container_of(_gadget, struct pxa2xx_udc, gadget);
1280
1281         /* not all boards support pullup control */
1282         if (!udc->mach->udc_command)
1283                 return -EOPNOTSUPP;
1284
1285         is_active = (is_active != 0);
1286         udc->pullup = is_active;
1287         pullup(udc, is_active);
1288         return 0;
1289 }
1290
1291 static const struct usb_gadget_ops pxa2xx_udc_ops = {
1292         .get_frame      = pxa2xx_udc_get_frame,
1293         .wakeup         = pxa2xx_udc_wakeup,
1294         .vbus_session   = pxa2xx_udc_vbus_session,
1295         .pullup         = pxa2xx_udc_pullup,
1296
1297         // .vbus_draw ... boards may consume current from VBUS, up to
1298         // 100-500mA based on config.  the 500uA suspend ceiling means
1299         // that exclusively vbus-powered PXA designs violate USB specs.
1300 };
1301
1302 /*-------------------------------------------------------------------------*/
1303
1304 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1305
1306 static const char proc_node_name [] = "driver/udc";
1307
1308 static int
1309 udc_proc_read(char *page, char **start, off_t off, int count,
1310                 int *eof, void *_dev)
1311 {
1312         char                    *buf = page;
1313         struct pxa2xx_udc       *dev = _dev;
1314         char                    *next = buf;
1315         unsigned                size = count;
1316         unsigned long           flags;
1317         int                     i, t;
1318         u32                     tmp;
1319
1320         if (off != 0)
1321                 return 0;
1322
1323         local_irq_save(flags);
1324
1325         /* basic device status */
1326         t = scnprintf(next, size, DRIVER_DESC "\n"
1327                 "%s version: %s\nGadget driver: %s\nHost %s\n\n",
1328                 driver_name, DRIVER_VERSION SIZE_STR DMASTR,
1329                 dev->driver ? dev->driver->driver.name : "(none)",
1330                 is_vbus_present() ? "full speed" : "disconnected");
1331         size -= t;
1332         next += t;
1333
1334         /* registers for device and ep0 */
1335         t = scnprintf(next, size,
1336                 "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
1337                 UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
1338         size -= t;
1339         next += t;
1340
1341         tmp = UDCCR;
1342         t = scnprintf(next, size,
1343                 "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
1344                 (tmp & UDCCR_REM) ? " rem" : "",
1345                 (tmp & UDCCR_RSTIR) ? " rstir" : "",
1346                 (tmp & UDCCR_SRM) ? " srm" : "",
1347                 (tmp & UDCCR_SUSIR) ? " susir" : "",
1348                 (tmp & UDCCR_RESIR) ? " resir" : "",
1349                 (tmp & UDCCR_RSM) ? " rsm" : "",
1350                 (tmp & UDCCR_UDA) ? " uda" : "",
1351                 (tmp & UDCCR_UDE) ? " ude" : "");
1352         size -= t;
1353         next += t;
1354
1355         tmp = UDCCS0;
1356         t = scnprintf(next, size,
1357                 "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
1358                 (tmp & UDCCS0_SA) ? " sa" : "",
1359                 (tmp & UDCCS0_RNE) ? " rne" : "",
1360                 (tmp & UDCCS0_FST) ? " fst" : "",
1361                 (tmp & UDCCS0_SST) ? " sst" : "",
1362                 (tmp & UDCCS0_DRWF) ? " dwrf" : "",
1363                 (tmp & UDCCS0_FTF) ? " ftf" : "",
1364                 (tmp & UDCCS0_IPR) ? " ipr" : "",
1365                 (tmp & UDCCS0_OPR) ? " opr" : "");
1366         size -= t;
1367         next += t;
1368
1369         if (dev->has_cfr) {
1370                 tmp = UDCCFR;
1371                 t = scnprintf(next, size,
1372                         "udccfr %02X =%s%s\n", tmp,
1373                         (tmp & UDCCFR_AREN) ? " aren" : "",
1374                         (tmp & UDCCFR_ACM) ? " acm" : "");
1375                 size -= t;
1376                 next += t;
1377         }
1378
1379         if (!is_vbus_present() || !dev->driver)
1380                 goto done;
1381
1382         t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
1383                 dev->stats.write.bytes, dev->stats.write.ops,
1384                 dev->stats.read.bytes, dev->stats.read.ops,
1385                 dev->stats.irqs);
1386         size -= t;
1387         next += t;
1388
1389         /* dump endpoint queues */
1390         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1391                 struct pxa2xx_ep        *ep = &dev->ep [i];
1392                 struct pxa2xx_request   *req;
1393                 int                     t;
1394
1395                 if (i != 0) {
1396                         const struct usb_endpoint_descriptor    *d;
1397
1398                         d = ep->desc;
1399                         if (!d)
1400                                 continue;
1401                         tmp = *dev->ep [i].reg_udccs;
1402                         t = scnprintf(next, size,
1403                                 "%s max %d %s udccs %02x irqs %lu/%lu\n",
1404                                 ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
1405                                 (ep->dma >= 0) ? "dma" : "pio", tmp,
1406                                 ep->pio_irqs, ep->dma_irqs);
1407                         /* TODO translate all five groups of udccs bits! */
1408
1409                 } else /* ep0 should only have one transfer queued */
1410                         t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
1411                                 ep->pio_irqs);
1412                 if (t <= 0 || t > size)
1413                         goto done;
1414                 size -= t;
1415                 next += t;
1416
1417                 if (list_empty(&ep->queue)) {
1418                         t = scnprintf(next, size, "\t(nothing queued)\n");
1419                         if (t <= 0 || t > size)
1420                                 goto done;
1421                         size -= t;
1422                         next += t;
1423                         continue;
1424                 }
1425                 list_for_each_entry(req, &ep->queue, queue) {
1426 #ifdef  USE_DMA
1427                         if (ep->dma >= 0 && req->queue.prev == &ep->queue)
1428                                 t = scnprintf(next, size,
1429                                         "\treq %p len %d/%d "
1430                                         "buf %p (dma%d dcmd %08x)\n",
1431                                         &req->req, req->req.actual,
1432                                         req->req.length, req->req.buf,
1433                                         ep->dma, DCMD(ep->dma)
1434                                         // low 13 bits == bytes-to-go
1435                                         );
1436                         else
1437 #endif
1438                                 t = scnprintf(next, size,
1439                                         "\treq %p len %d/%d buf %p\n",
1440                                         &req->req, req->req.actual,
1441                                         req->req.length, req->req.buf);
1442                         if (t <= 0 || t > size)
1443                                 goto done;
1444                         size -= t;
1445                         next += t;
1446                 }
1447         }
1448
1449 done:
1450         local_irq_restore(flags);
1451         *eof = 1;
1452         return count - size;
1453 }
1454
1455 #define create_proc_files() \
1456         create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
1457 #define remove_proc_files() \
1458         remove_proc_entry(proc_node_name, NULL)
1459
1460 #else   /* !CONFIG_USB_GADGET_DEBUG_FILES */
1461
1462 #define create_proc_files() do {} while (0)
1463 #define remove_proc_files() do {} while (0)
1464
1465 #endif  /* CONFIG_USB_GADGET_DEBUG_FILES */
1466
1467 /*-------------------------------------------------------------------------*/
1468
1469 /*
1470  *      udc_disable - disable USB device controller
1471  */
1472 static void udc_disable(struct pxa2xx_udc *dev)
1473 {
1474         /* block all irqs */
1475         udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
1476         UICR0 = UICR1 = 0xff;
1477         UFNRH = UFNRH_SIM;
1478
1479         /* if hardware supports it, disconnect from usb */
1480         pullup_off();
1481
1482         udc_clear_mask_UDCCR(UDCCR_UDE);
1483
1484 #ifdef  CONFIG_ARCH_PXA
1485         /* Disable clock for USB device */
1486         pxa_set_cken(CKEN11_USB, 0);
1487 #endif
1488
1489         ep0_idle (dev);
1490         dev->gadget.speed = USB_SPEED_UNKNOWN;
1491         LED_CONNECTED_OFF;
1492 }
1493
1494
1495 /*
1496  *      udc_reinit - initialize software state
1497  */
1498 static void udc_reinit(struct pxa2xx_udc *dev)
1499 {
1500         u32     i;
1501
1502         /* device/ep0 records init */
1503         INIT_LIST_HEAD (&dev->gadget.ep_list);
1504         INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
1505         dev->ep0state = EP0_IDLE;
1506
1507         /* basic endpoint records init */
1508         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1509                 struct pxa2xx_ep *ep = &dev->ep[i];
1510
1511                 if (i != 0)
1512                         list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
1513
1514                 ep->desc = NULL;
1515                 ep->stopped = 0;
1516                 INIT_LIST_HEAD (&ep->queue);
1517                 ep->pio_irqs = ep->dma_irqs = 0;
1518         }
1519
1520         /* the rest was statically initialized, and is read-only */
1521 }
1522
1523 /* until it's enabled, this UDC should be completely invisible
1524  * to any USB host.
1525  */
1526 static void udc_enable (struct pxa2xx_udc *dev)
1527 {
1528         udc_clear_mask_UDCCR(UDCCR_UDE);
1529
1530 #ifdef  CONFIG_ARCH_PXA
1531         /* Enable clock for USB device */
1532         pxa_set_cken(CKEN11_USB, 1);
1533         udelay(5);
1534 #endif
1535
1536         /* try to clear these bits before we enable the udc */
1537         udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
1538
1539         ep0_idle(dev);
1540         dev->gadget.speed = USB_SPEED_UNKNOWN;
1541         dev->stats.irqs = 0;
1542
1543         /*
1544          * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
1545          * - enable UDC
1546          * - if RESET is already in progress, ack interrupt
1547          * - unmask reset interrupt
1548          */
1549         udc_set_mask_UDCCR(UDCCR_UDE);
1550         if (!(UDCCR & UDCCR_UDA))
1551                 udc_ack_int_UDCCR(UDCCR_RSTIR);
1552
1553         if (dev->has_cfr /* UDC_RES2 is defined */) {
1554                 /* pxa255 (a0+) can avoid a set_config race that could
1555                  * prevent gadget drivers from configuring correctly
1556                  */
1557                 UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
1558         } else {
1559                 /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
1560                  * which could result in missing packets and interrupts.
1561                  * supposedly one bit per endpoint, controlling whether it
1562                  * double buffers or not; ACM/AREN bits fit into the holes.
1563                  * zero bits (like USIR0_IRx) disable double buffering.
1564                  */
1565                 UDC_RES1 = 0x00;
1566                 UDC_RES2 = 0x00;
1567         }
1568
1569 #ifdef  DISABLE_TEST_MODE
1570         /* "test mode" seems to have become the default in later chip
1571          * revs, preventing double buffering (and invalidating docs).
1572          * this EXPERIMENT enables it for bulk endpoints by tweaking
1573          * undefined/reserved register bits (that other drivers clear).
1574          * Belcarra code comments noted this usage.
1575          */
1576         if (fifo_mode & 1) {    /* IN endpoints */
1577                 UDC_RES1 |= USIR0_IR1|USIR0_IR6;
1578                 UDC_RES2 |= USIR1_IR11;
1579         }
1580         if (fifo_mode & 2) {    /* OUT endpoints */
1581                 UDC_RES1 |= USIR0_IR2|USIR0_IR7;
1582                 UDC_RES2 |= USIR1_IR12;
1583         }
1584 #endif
1585
1586         /* enable suspend/resume and reset irqs */
1587         udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
1588
1589         /* enable ep0 irqs */
1590         UICR0 &= ~UICR0_IM0;
1591
1592         /* if hardware supports it, pullup D+ and wait for reset */
1593         pullup_on();
1594 }
1595
1596
1597 /* when a driver is successfully registered, it will receive
1598  * control requests including set_configuration(), which enables
1599  * non-control requests.  then usb traffic follows until a
1600  * disconnect is reported.  then a host may connect again, or
1601  * the driver might get unbound.
1602  */
1603 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1604 {
1605         struct pxa2xx_udc       *dev = the_controller;
1606         int                     retval;
1607
1608         if (!driver
1609                         || driver->speed < USB_SPEED_FULL
1610                         || !driver->bind
1611                         || !driver->disconnect
1612                         || !driver->setup)
1613                 return -EINVAL;
1614         if (!dev)
1615                 return -ENODEV;
1616         if (dev->driver)
1617                 return -EBUSY;
1618
1619         /* first hook up the driver ... */
1620         dev->driver = driver;
1621         dev->gadget.dev.driver = &driver->driver;
1622         dev->pullup = 1;
1623
1624         retval = device_add (&dev->gadget.dev);
1625         if (retval) {
1626 fail:
1627                 dev->driver = NULL;
1628                 dev->gadget.dev.driver = NULL;
1629                 return retval;
1630         }
1631         retval = driver->bind(&dev->gadget);
1632         if (retval) {
1633                 DMSG("bind to driver %s --> error %d\n",
1634                                 driver->driver.name, retval);
1635                 device_del (&dev->gadget.dev);
1636                 goto fail;
1637         }
1638
1639         /* ... then enable host detection and ep0; and we're ready
1640          * for set_configuration as well as eventual disconnect.
1641          */
1642         DMSG("registered gadget driver '%s'\n", driver->driver.name);
1643         pullup(dev, 1);
1644         dump_state(dev);
1645         return 0;
1646 }
1647 EXPORT_SYMBOL(usb_gadget_register_driver);
1648
1649 static void
1650 stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
1651 {
1652         int i;
1653
1654         /* don't disconnect drivers more than once */
1655         if (dev->gadget.speed == USB_SPEED_UNKNOWN)
1656                 driver = NULL;
1657         dev->gadget.speed = USB_SPEED_UNKNOWN;
1658
1659         /* prevent new request submissions, kill any outstanding requests  */
1660         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1661                 struct pxa2xx_ep *ep = &dev->ep[i];
1662
1663                 ep->stopped = 1;
1664                 nuke(ep, -ESHUTDOWN);
1665         }
1666         del_timer_sync(&dev->timer);
1667
1668         /* report disconnect; the driver is already quiesced */
1669         LED_CONNECTED_OFF;
1670         if (driver)
1671                 driver->disconnect(&dev->gadget);
1672
1673         /* re-init driver-visible data structures */
1674         udc_reinit(dev);
1675 }
1676
1677 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1678 {
1679         struct pxa2xx_udc       *dev = the_controller;
1680
1681         if (!dev)
1682                 return -ENODEV;
1683         if (!driver || driver != dev->driver || !driver->unbind)
1684                 return -EINVAL;
1685
1686         local_irq_disable();
1687         pullup(dev, 0);
1688         stop_activity(dev, driver);
1689         local_irq_enable();
1690
1691         driver->unbind(&dev->gadget);
1692         dev->driver = NULL;
1693
1694         device_del (&dev->gadget.dev);
1695
1696         DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
1697         dump_state(dev);
1698         return 0;
1699 }
1700 EXPORT_SYMBOL(usb_gadget_unregister_driver);
1701
1702
1703 /*-------------------------------------------------------------------------*/
1704
1705 #ifdef CONFIG_ARCH_LUBBOCK
1706
1707 /* Lubbock has separate connect and disconnect irqs.  More typical designs
1708  * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
1709  */
1710
1711 static irqreturn_t
1712 lubbock_vbus_irq(int irq, void *_dev)
1713 {
1714         struct pxa2xx_udc       *dev = _dev;
1715         int                     vbus;
1716
1717         dev->stats.irqs++;
1718         HEX_DISPLAY(dev->stats.irqs);
1719         switch (irq) {
1720         case LUBBOCK_USB_IRQ:
1721                 LED_CONNECTED_ON;
1722                 vbus = 1;
1723                 disable_irq(LUBBOCK_USB_IRQ);
1724                 enable_irq(LUBBOCK_USB_DISC_IRQ);
1725                 break;
1726         case LUBBOCK_USB_DISC_IRQ:
1727                 LED_CONNECTED_OFF;
1728                 vbus = 0;
1729                 disable_irq(LUBBOCK_USB_DISC_IRQ);
1730                 enable_irq(LUBBOCK_USB_IRQ);
1731                 break;
1732         default:
1733                 return IRQ_NONE;
1734         }
1735
1736         pxa2xx_udc_vbus_session(&dev->gadget, vbus);
1737         return IRQ_HANDLED;
1738 }
1739
1740 #endif
1741
1742 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
1743 {
1744         struct pxa2xx_udc       *dev = _dev;
1745         int                     vbus = udc_gpio_get(dev->mach->gpio_vbus);
1746
1747         pxa2xx_udc_vbus_session(&dev->gadget, vbus);
1748         return IRQ_HANDLED;
1749 }
1750
1751
1752 /*-------------------------------------------------------------------------*/
1753
1754 static inline void clear_ep_state (struct pxa2xx_udc *dev)
1755 {
1756         unsigned i;
1757
1758         /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
1759          * fifos, and pending transactions mustn't be continued in any case.
1760          */
1761         for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
1762                 nuke(&dev->ep[i], -ECONNABORTED);
1763 }
1764
1765 static void udc_watchdog(unsigned long _dev)
1766 {
1767         struct pxa2xx_udc       *dev = (void *)_dev;
1768
1769         local_irq_disable();
1770         if (dev->ep0state == EP0_STALL
1771                         && (UDCCS0 & UDCCS0_FST) == 0
1772                         && (UDCCS0 & UDCCS0_SST) == 0) {
1773                 UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
1774                 DBG(DBG_VERBOSE, "ep0 re-stall\n");
1775                 start_watchdog(dev);
1776         }
1777         local_irq_enable();
1778 }
1779
1780 static void handle_ep0 (struct pxa2xx_udc *dev)
1781 {
1782         u32                     udccs0 = UDCCS0;
1783         struct pxa2xx_ep        *ep = &dev->ep [0];
1784         struct pxa2xx_request   *req;
1785         union {
1786                 struct usb_ctrlrequest  r;
1787                 u8                      raw [8];
1788                 u32                     word [2];
1789         } u;
1790
1791         if (list_empty(&ep->queue))
1792                 req = NULL;
1793         else
1794                 req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
1795
1796         /* clear stall status */
1797         if (udccs0 & UDCCS0_SST) {
1798                 nuke(ep, -EPIPE);
1799                 UDCCS0 = UDCCS0_SST;
1800                 del_timer(&dev->timer);
1801                 ep0_idle(dev);
1802         }
1803
1804         /* previous request unfinished?  non-error iff back-to-back ... */
1805         if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
1806                 nuke(ep, 0);
1807                 del_timer(&dev->timer);
1808                 ep0_idle(dev);
1809         }
1810
1811         switch (dev->ep0state) {
1812         case EP0_IDLE:
1813                 /* late-breaking status? */
1814                 udccs0 = UDCCS0;
1815
1816                 /* start control request? */
1817                 if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
1818                                 == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
1819                         int i;
1820
1821                         nuke (ep, -EPROTO);
1822
1823                         /* read SETUP packet */
1824                         for (i = 0; i < 8; i++) {
1825                                 if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
1826 bad_setup:
1827                                         DMSG("SETUP %d!\n", i);
1828                                         goto stall;
1829                                 }
1830                                 u.raw [i] = (u8) UDDR0;
1831                         }
1832                         if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
1833                                 goto bad_setup;
1834
1835 got_setup:
1836                         DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1837                                 u.r.bRequestType, u.r.bRequest,
1838                                 le16_to_cpu(u.r.wValue),
1839                                 le16_to_cpu(u.r.wIndex),
1840                                 le16_to_cpu(u.r.wLength));
1841
1842                         /* cope with automagic for some standard requests. */
1843                         dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
1844                                                 == USB_TYPE_STANDARD;
1845                         dev->req_config = 0;
1846                         dev->req_pending = 1;
1847                         switch (u.r.bRequest) {
1848                         /* hardware restricts gadget drivers here! */
1849                         case USB_REQ_SET_CONFIGURATION:
1850                                 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1851                                         /* reflect hardware's automagic
1852                                          * up to the gadget driver.
1853                                          */
1854 config_change:
1855                                         dev->req_config = 1;
1856                                         clear_ep_state(dev);
1857                                         /* if !has_cfr, there's no synch
1858                                          * else use AREN (later) not SA|OPR
1859                                          * USIR0_IR0 acts edge sensitive
1860                                          */
1861                                 }
1862                                 break;
1863                         /* ... and here, even more ... */
1864                         case USB_REQ_SET_INTERFACE:
1865                                 if (u.r.bRequestType == USB_RECIP_INTERFACE) {
1866                                         /* udc hardware is broken by design:
1867                                          *  - altsetting may only be zero;
1868                                          *  - hw resets all interfaces' eps;
1869                                          *  - ep reset doesn't include halt(?).
1870                                          */
1871                                         DMSG("broken set_interface (%d/%d)\n",
1872                                                 le16_to_cpu(u.r.wIndex),
1873                                                 le16_to_cpu(u.r.wValue));
1874                                         goto config_change;
1875                                 }
1876                                 break;
1877                         /* hardware was supposed to hide this */
1878                         case USB_REQ_SET_ADDRESS:
1879                                 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1880                                         ep0start(dev, 0, "address");
1881                                         return;
1882                                 }
1883                                 break;
1884                         }
1885
1886                         if (u.r.bRequestType & USB_DIR_IN)
1887                                 dev->ep0state = EP0_IN_DATA_PHASE;
1888                         else
1889                                 dev->ep0state = EP0_OUT_DATA_PHASE;
1890
1891                         i = dev->driver->setup(&dev->gadget, &u.r);
1892                         if (i < 0) {
1893                                 /* hardware automagic preventing STALL... */
1894                                 if (dev->req_config) {
1895                                         /* hardware sometimes neglects to tell
1896                                          * tell us about config change events,
1897                                          * so later ones may fail...
1898                                          */
1899                                         WARN("config change %02x fail %d?\n",
1900                                                 u.r.bRequest, i);
1901                                         return;
1902                                         /* TODO experiment:  if has_cfr,
1903                                          * hardware didn't ACK; maybe we
1904                                          * could actually STALL!
1905                                          */
1906                                 }
1907                                 DBG(DBG_VERBOSE, "protocol STALL, "
1908                                         "%02x err %d\n", UDCCS0, i);
1909 stall:
1910                                 /* the watchdog timer helps deal with cases
1911                                  * where udc seems to clear FST wrongly, and
1912                                  * then NAKs instead of STALLing.
1913                                  */
1914                                 ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
1915                                 start_watchdog(dev);
1916                                 dev->ep0state = EP0_STALL;
1917
1918                         /* deferred i/o == no response yet */
1919                         } else if (dev->req_pending) {
1920                                 if (likely(dev->ep0state == EP0_IN_DATA_PHASE
1921                                                 || dev->req_std || u.r.wLength))
1922                                         ep0start(dev, 0, "defer");
1923                                 else
1924                                         ep0start(dev, UDCCS0_IPR, "defer/IPR");
1925                         }
1926
1927                         /* expect at least one data or status stage irq */
1928                         return;
1929
1930                 } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
1931                                 == (UDCCS0_OPR|UDCCS0_SA))) {
1932                         unsigned i;
1933
1934                         /* pxa210/250 erratum 131 for B0/B1 says RNE lies.
1935                          * still observed on a pxa255 a0.
1936                          */
1937                         DBG(DBG_VERBOSE, "e131\n");
1938                         nuke(ep, -EPROTO);
1939
1940                         /* read SETUP data, but don't trust it too much */
1941                         for (i = 0; i < 8; i++)
1942                                 u.raw [i] = (u8) UDDR0;
1943                         if ((u.r.bRequestType & USB_RECIP_MASK)
1944                                         > USB_RECIP_OTHER)
1945                                 goto stall;
1946                         if (u.word [0] == 0 && u.word [1] == 0)
1947                                 goto stall;
1948                         goto got_setup;
1949                 } else {
1950                         /* some random early IRQ:
1951                          * - we acked FST
1952                          * - IPR cleared
1953                          * - OPR got set, without SA (likely status stage)
1954                          */
1955                         UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
1956                 }
1957                 break;
1958         case EP0_IN_DATA_PHASE:                 /* GET_DESCRIPTOR etc */
1959                 if (udccs0 & UDCCS0_OPR) {
1960                         UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
1961                         DBG(DBG_VERBOSE, "ep0in premature status\n");
1962                         if (req)
1963                                 done(ep, req, 0);
1964                         ep0_idle(dev);
1965                 } else /* irq was IPR clearing */ {
1966                         if (req) {
1967                                 /* this IN packet might finish the request */
1968                                 (void) write_ep0_fifo(ep, req);
1969                         } /* else IN token before response was written */
1970                 }
1971                 break;
1972         case EP0_OUT_DATA_PHASE:                /* SET_DESCRIPTOR etc */
1973                 if (udccs0 & UDCCS0_OPR) {
1974                         if (req) {
1975                                 /* this OUT packet might finish the request */
1976                                 if (read_ep0_fifo(ep, req))
1977                                         done(ep, req, 0);
1978                                 /* else more OUT packets expected */
1979                         } /* else OUT token before read was issued */
1980                 } else /* irq was IPR clearing */ {
1981                         DBG(DBG_VERBOSE, "ep0out premature status\n");
1982                         if (req)
1983                                 done(ep, req, 0);
1984                         ep0_idle(dev);
1985                 }
1986                 break;
1987         case EP0_END_XFER:
1988                 if (req)
1989                         done(ep, req, 0);
1990                 /* ack control-IN status (maybe in-zlp was skipped)
1991                  * also appears after some config change events.
1992                  */
1993                 if (udccs0 & UDCCS0_OPR)
1994                         UDCCS0 = UDCCS0_OPR;
1995                 ep0_idle(dev);
1996                 break;
1997         case EP0_STALL:
1998                 UDCCS0 = UDCCS0_FST;
1999                 break;
2000         }
2001         USIR0 = USIR0_IR0;
2002 }
2003
2004 static void handle_ep(struct pxa2xx_ep *ep)
2005 {
2006         struct pxa2xx_request   *req;
2007         int                     is_in = ep->bEndpointAddress & USB_DIR_IN;
2008         int                     completed;
2009         u32                     udccs, tmp;
2010
2011         do {
2012                 completed = 0;
2013                 if (likely (!list_empty(&ep->queue)))
2014                         req = list_entry(ep->queue.next,
2015                                         struct pxa2xx_request, queue);
2016                 else
2017                         req = NULL;
2018
2019                 // TODO check FST handling
2020
2021                 udccs = *ep->reg_udccs;
2022                 if (unlikely(is_in)) {  /* irq from TPC, SST, or (ISO) TUR */
2023                         tmp = UDCCS_BI_TUR;
2024                         if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
2025                                 tmp |= UDCCS_BI_SST;
2026                         tmp &= udccs;
2027                         if (likely (tmp))
2028                                 *ep->reg_udccs = tmp;
2029                         if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
2030                                 completed = write_fifo(ep, req);
2031
2032                 } else {        /* irq from RPC (or for ISO, ROF) */
2033                         if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
2034                                 tmp = UDCCS_BO_SST | UDCCS_BO_DME;
2035                         else
2036                                 tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
2037                         tmp &= udccs;
2038                         if (likely(tmp))
2039                                 *ep->reg_udccs = tmp;
2040
2041                         /* fifos can hold packets, ready for reading... */
2042                         if (likely(req)) {
2043 #ifdef USE_OUT_DMA
2044 // TODO didn't yet debug out-dma.  this approach assumes
2045 // the worst about short packets and RPC; it might be better.
2046
2047                                 if (likely(ep->dma >= 0)) {
2048                                         if (!(udccs & UDCCS_BO_RSP)) {
2049                                                 *ep->reg_udccs = UDCCS_BO_RPC;
2050                                                 ep->dma_irqs++;
2051                                                 return;
2052                                         }
2053                                 }
2054 #endif
2055                                 completed = read_fifo(ep, req);
2056                         } else
2057                                 pio_irq_disable (ep->bEndpointAddress);
2058                 }
2059                 ep->pio_irqs++;
2060         } while (completed);
2061 }
2062
2063 /*
2064  *      pxa2xx_udc_irq - interrupt handler
2065  *
2066  * avoid delays in ep0 processing. the control handshaking isn't always
2067  * under software control (pxa250c0 and the pxa255 are better), and delays
2068  * could cause usb protocol errors.
2069  */
2070 static irqreturn_t
2071 pxa2xx_udc_irq(int irq, void *_dev)
2072 {
2073         struct pxa2xx_udc       *dev = _dev;
2074         int                     handled;
2075
2076         dev->stats.irqs++;
2077         HEX_DISPLAY(dev->stats.irqs);
2078         do {
2079                 u32             udccr = UDCCR;
2080
2081                 handled = 0;
2082
2083                 /* SUSpend Interrupt Request */
2084                 if (unlikely(udccr & UDCCR_SUSIR)) {
2085                         udc_ack_int_UDCCR(UDCCR_SUSIR);
2086                         handled = 1;
2087                         DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
2088                                 ? "" : "+disconnect");
2089
2090                         if (!is_vbus_present())
2091                                 stop_activity(dev, dev->driver);
2092                         else if (dev->gadget.speed != USB_SPEED_UNKNOWN
2093                                         && dev->driver
2094                                         && dev->driver->suspend)
2095                                 dev->driver->suspend(&dev->gadget);
2096                         ep0_idle (dev);
2097                 }
2098
2099                 /* RESume Interrupt Request */
2100                 if (unlikely(udccr & UDCCR_RESIR)) {
2101                         udc_ack_int_UDCCR(UDCCR_RESIR);
2102                         handled = 1;
2103                         DBG(DBG_VERBOSE, "USB resume\n");
2104
2105                         if (dev->gadget.speed != USB_SPEED_UNKNOWN
2106                                         && dev->driver
2107                                         && dev->driver->resume
2108                                         && is_vbus_present())
2109                                 dev->driver->resume(&dev->gadget);
2110                 }
2111
2112                 /* ReSeT Interrupt Request - USB reset */
2113                 if (unlikely(udccr & UDCCR_RSTIR)) {
2114                         udc_ack_int_UDCCR(UDCCR_RSTIR);
2115                         handled = 1;
2116
2117                         if ((UDCCR & UDCCR_UDA) == 0) {
2118                                 DBG(DBG_VERBOSE, "USB reset start\n");
2119
2120                                 /* reset driver and endpoints,
2121                                  * in case that's not yet done
2122                                  */
2123                                 stop_activity (dev, dev->driver);
2124
2125                         } else {
2126                                 DBG(DBG_VERBOSE, "USB reset end\n");
2127                                 dev->gadget.speed = USB_SPEED_FULL;
2128                                 LED_CONNECTED_ON;
2129                                 memset(&dev->stats, 0, sizeof dev->stats);
2130                                 /* driver and endpoints are still reset */
2131                         }
2132
2133                 } else {
2134                         u32     usir0 = USIR0 & ~UICR0;
2135                         u32     usir1 = USIR1 & ~UICR1;
2136                         int     i;
2137
2138                         if (unlikely (!usir0 && !usir1))
2139                                 continue;
2140
2141                         DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
2142
2143                         /* control traffic */
2144                         if (usir0 & USIR0_IR0) {
2145                                 dev->ep[0].pio_irqs++;
2146                                 handle_ep0(dev);
2147                                 handled = 1;
2148                         }
2149
2150                         /* endpoint data transfers */
2151                         for (i = 0; i < 8; i++) {
2152                                 u32     tmp = 1 << i;
2153
2154                                 if (i && (usir0 & tmp)) {
2155                                         handle_ep(&dev->ep[i]);
2156                                         USIR0 |= tmp;
2157                                         handled = 1;
2158                                 }
2159                                 if (usir1 & tmp) {
2160                                         handle_ep(&dev->ep[i+8]);
2161                                         USIR1 |= tmp;
2162                                         handled = 1;
2163                                 }
2164                         }
2165                 }
2166
2167                 /* we could also ask for 1 msec SOF (SIR) interrupts */
2168
2169         } while (handled);
2170         return IRQ_HANDLED;
2171 }
2172
2173 /*-------------------------------------------------------------------------*/
2174
2175 static void nop_release (struct device *dev)
2176 {
2177         DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
2178 }
2179
2180 /* this uses load-time allocation and initialization (instead of
2181  * doing it at run-time) to save code, eliminate fault paths, and
2182  * be more obviously correct.
2183  */
2184 static struct pxa2xx_udc memory = {
2185         .gadget = {
2186                 .ops            = &pxa2xx_udc_ops,
2187                 .ep0            = &memory.ep[0].ep,
2188                 .name           = driver_name,
2189                 .dev = {
2190                         .bus_id         = "gadget",
2191                         .release        = nop_release,
2192                 },
2193         },
2194
2195         /* control endpoint */
2196         .ep[0] = {
2197                 .ep = {
2198                         .name           = ep0name,
2199                         .ops            = &pxa2xx_ep_ops,
2200                         .maxpacket      = EP0_FIFO_SIZE,
2201                 },
2202                 .dev            = &memory,
2203                 .reg_udccs      = &UDCCS0,
2204                 .reg_uddr       = &UDDR0,
2205         },
2206
2207         /* first group of endpoints */
2208         .ep[1] = {
2209                 .ep = {
2210                         .name           = "ep1in-bulk",
2211                         .ops            = &pxa2xx_ep_ops,
2212                         .maxpacket      = BULK_FIFO_SIZE,
2213                 },
2214                 .dev            = &memory,
2215                 .fifo_size      = BULK_FIFO_SIZE,
2216                 .bEndpointAddress = USB_DIR_IN | 1,
2217                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2218                 .reg_udccs      = &UDCCS1,
2219                 .reg_uddr       = &UDDR1,
2220                 drcmr (25)
2221         },
2222         .ep[2] = {
2223                 .ep = {
2224                         .name           = "ep2out-bulk",
2225                         .ops            = &pxa2xx_ep_ops,
2226                         .maxpacket      = BULK_FIFO_SIZE,
2227                 },
2228                 .dev            = &memory,
2229                 .fifo_size      = BULK_FIFO_SIZE,
2230                 .bEndpointAddress = 2,
2231                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2232                 .reg_udccs      = &UDCCS2,
2233                 .reg_ubcr       = &UBCR2,
2234                 .reg_uddr       = &UDDR2,
2235                 drcmr (26)
2236         },
2237 #ifndef CONFIG_USB_PXA2XX_SMALL
2238         .ep[3] = {
2239                 .ep = {
2240                         .name           = "ep3in-iso",
2241                         .ops            = &pxa2xx_ep_ops,
2242                         .maxpacket      = ISO_FIFO_SIZE,
2243                 },
2244                 .dev            = &memory,
2245                 .fifo_size      = ISO_FIFO_SIZE,
2246                 .bEndpointAddress = USB_DIR_IN | 3,
2247                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2248                 .reg_udccs      = &UDCCS3,
2249                 .reg_uddr       = &UDDR3,
2250                 drcmr (27)
2251         },
2252         .ep[4] = {
2253                 .ep = {
2254                         .name           = "ep4out-iso",
2255                         .ops            = &pxa2xx_ep_ops,
2256                         .maxpacket      = ISO_FIFO_SIZE,
2257                 },
2258                 .dev            = &memory,
2259                 .fifo_size      = ISO_FIFO_SIZE,
2260                 .bEndpointAddress = 4,
2261                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2262                 .reg_udccs      = &UDCCS4,
2263                 .reg_ubcr       = &UBCR4,
2264                 .reg_uddr       = &UDDR4,
2265                 drcmr (28)
2266         },
2267         .ep[5] = {
2268                 .ep = {
2269                         .name           = "ep5in-int",
2270                         .ops            = &pxa2xx_ep_ops,
2271                         .maxpacket      = INT_FIFO_SIZE,
2272                 },
2273                 .dev            = &memory,
2274                 .fifo_size      = INT_FIFO_SIZE,
2275                 .bEndpointAddress = USB_DIR_IN | 5,
2276                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2277                 .reg_udccs      = &UDCCS5,
2278                 .reg_uddr       = &UDDR5,
2279         },
2280
2281         /* second group of endpoints */
2282         .ep[6] = {
2283                 .ep = {
2284                         .name           = "ep6in-bulk",
2285                         .ops            = &pxa2xx_ep_ops,
2286                         .maxpacket      = BULK_FIFO_SIZE,
2287                 },
2288                 .dev            = &memory,
2289                 .fifo_size      = BULK_FIFO_SIZE,
2290                 .bEndpointAddress = USB_DIR_IN | 6,
2291                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2292                 .reg_udccs      = &UDCCS6,
2293                 .reg_uddr       = &UDDR6,
2294                 drcmr (30)
2295         },
2296         .ep[7] = {
2297                 .ep = {
2298                         .name           = "ep7out-bulk",
2299                         .ops            = &pxa2xx_ep_ops,
2300                         .maxpacket      = BULK_FIFO_SIZE,
2301                 },
2302                 .dev            = &memory,
2303                 .fifo_size      = BULK_FIFO_SIZE,
2304                 .bEndpointAddress = 7,
2305                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2306                 .reg_udccs      = &UDCCS7,
2307                 .reg_ubcr       = &UBCR7,
2308                 .reg_uddr       = &UDDR7,
2309                 drcmr (31)
2310         },
2311         .ep[8] = {
2312                 .ep = {
2313                         .name           = "ep8in-iso",
2314                         .ops            = &pxa2xx_ep_ops,
2315                         .maxpacket      = ISO_FIFO_SIZE,
2316                 },
2317                 .dev            = &memory,
2318                 .fifo_size      = ISO_FIFO_SIZE,
2319                 .bEndpointAddress = USB_DIR_IN | 8,
2320                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2321                 .reg_udccs      = &UDCCS8,
2322                 .reg_uddr       = &UDDR8,
2323                 drcmr (32)
2324         },
2325         .ep[9] = {
2326                 .ep = {
2327                         .name           = "ep9out-iso",
2328                         .ops            = &pxa2xx_ep_ops,
2329                         .maxpacket      = ISO_FIFO_SIZE,
2330                 },
2331                 .dev            = &memory,
2332                 .fifo_size      = ISO_FIFO_SIZE,
2333                 .bEndpointAddress = 9,
2334                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2335                 .reg_udccs      = &UDCCS9,
2336                 .reg_ubcr       = &UBCR9,
2337                 .reg_uddr       = &UDDR9,
2338                 drcmr (33)
2339         },
2340         .ep[10] = {
2341                 .ep = {
2342                         .name           = "ep10in-int",
2343                         .ops            = &pxa2xx_ep_ops,
2344                         .maxpacket      = INT_FIFO_SIZE,
2345                 },
2346                 .dev            = &memory,
2347                 .fifo_size      = INT_FIFO_SIZE,
2348                 .bEndpointAddress = USB_DIR_IN | 10,
2349                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2350                 .reg_udccs      = &UDCCS10,
2351                 .reg_uddr       = &UDDR10,
2352         },
2353
2354         /* third group of endpoints */
2355         .ep[11] = {
2356                 .ep = {
2357                         .name           = "ep11in-bulk",
2358                         .ops            = &pxa2xx_ep_ops,
2359                         .maxpacket      = BULK_FIFO_SIZE,
2360                 },
2361                 .dev            = &memory,
2362                 .fifo_size      = BULK_FIFO_SIZE,
2363                 .bEndpointAddress = USB_DIR_IN | 11,
2364                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2365                 .reg_udccs      = &UDCCS11,
2366                 .reg_uddr       = &UDDR11,
2367                 drcmr (35)
2368         },
2369         .ep[12] = {
2370                 .ep = {
2371                         .name           = "ep12out-bulk",
2372                         .ops            = &pxa2xx_ep_ops,
2373                         .maxpacket      = BULK_FIFO_SIZE,
2374                 },
2375                 .dev            = &memory,
2376                 .fifo_size      = BULK_FIFO_SIZE,
2377                 .bEndpointAddress = 12,
2378                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2379                 .reg_udccs      = &UDCCS12,
2380                 .reg_ubcr       = &UBCR12,
2381                 .reg_uddr       = &UDDR12,
2382                 drcmr (36)
2383         },
2384         .ep[13] = {
2385                 .ep = {
2386                         .name           = "ep13in-iso",
2387                         .ops            = &pxa2xx_ep_ops,
2388                         .maxpacket      = ISO_FIFO_SIZE,
2389                 },
2390                 .dev            = &memory,
2391                 .fifo_size      = ISO_FIFO_SIZE,
2392                 .bEndpointAddress = USB_DIR_IN | 13,
2393                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2394                 .reg_udccs      = &UDCCS13,
2395                 .reg_uddr       = &UDDR13,
2396                 drcmr (37)
2397         },
2398         .ep[14] = {
2399                 .ep = {
2400                         .name           = "ep14out-iso",
2401                         .ops            = &pxa2xx_ep_ops,
2402                         .maxpacket      = ISO_FIFO_SIZE,
2403                 },
2404                 .dev            = &memory,
2405                 .fifo_size      = ISO_FIFO_SIZE,
2406                 .bEndpointAddress = 14,
2407                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2408                 .reg_udccs      = &UDCCS14,
2409                 .reg_ubcr       = &UBCR14,
2410                 .reg_uddr       = &UDDR14,
2411                 drcmr (38)
2412         },
2413         .ep[15] = {
2414                 .ep = {
2415                         .name           = "ep15in-int",
2416                         .ops            = &pxa2xx_ep_ops,
2417                         .maxpacket      = INT_FIFO_SIZE,
2418                 },
2419                 .dev            = &memory,
2420                 .fifo_size      = INT_FIFO_SIZE,
2421                 .bEndpointAddress = USB_DIR_IN | 15,
2422                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2423                 .reg_udccs      = &UDCCS15,
2424                 .reg_uddr       = &UDDR15,
2425         },
2426 #endif /* !CONFIG_USB_PXA2XX_SMALL */
2427 };
2428
2429 #define CP15R0_VENDOR_MASK      0xffffe000
2430
2431 #if     defined(CONFIG_ARCH_PXA)
2432 #define CP15R0_XSCALE_VALUE     0x69052000      /* intel/arm/xscale */
2433
2434 #elif   defined(CONFIG_ARCH_IXP4XX)
2435 #define CP15R0_XSCALE_VALUE     0x69054000      /* intel/arm/ixp4xx */
2436
2437 #endif
2438
2439 #define CP15R0_PROD_MASK        0x000003f0
2440 #define PXA25x                  0x00000100      /* and PXA26x */
2441 #define PXA210                  0x00000120
2442
2443 #define CP15R0_REV_MASK         0x0000000f
2444
2445 #define CP15R0_PRODREV_MASK     (CP15R0_PROD_MASK | CP15R0_REV_MASK)
2446
2447 #define PXA255_A0               0x00000106      /* or PXA260_B1 */
2448 #define PXA250_C0               0x00000105      /* or PXA26x_B0 */
2449 #define PXA250_B2               0x00000104
2450 #define PXA250_B1               0x00000103      /* or PXA260_A0 */
2451 #define PXA250_B0               0x00000102
2452 #define PXA250_A1               0x00000101
2453 #define PXA250_A0               0x00000100
2454
2455 #define PXA210_C0               0x00000125
2456 #define PXA210_B2               0x00000124
2457 #define PXA210_B1               0x00000123
2458 #define PXA210_B0               0x00000122
2459 #define IXP425_A0               0x000001c1
2460 #define IXP425_B0               0x000001f1
2461 #define IXP465_AD               0x00000200
2462
2463 /*
2464  *      probe - binds to the platform device
2465  */
2466 static int __init pxa2xx_udc_probe(struct platform_device *pdev)
2467 {
2468         struct pxa2xx_udc *dev = &memory;
2469         int retval, out_dma = 1, vbus_irq, irq;
2470         u32 chiprev;
2471
2472         /* insist on Intel/ARM/XScale */
2473         asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
2474         if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
2475                 printk(KERN_ERR "%s: not XScale!\n", driver_name);
2476                 return -ENODEV;
2477         }
2478
2479         /* trigger chiprev-specific logic */
2480         switch (chiprev & CP15R0_PRODREV_MASK) {
2481 #if     defined(CONFIG_ARCH_PXA)
2482         case PXA255_A0:
2483                 dev->has_cfr = 1;
2484                 break;
2485         case PXA250_A0:
2486         case PXA250_A1:
2487                 /* A0/A1 "not released"; ep 13, 15 unusable */
2488                 /* fall through */
2489         case PXA250_B2: case PXA210_B2:
2490         case PXA250_B1: case PXA210_B1:
2491         case PXA250_B0: case PXA210_B0:
2492                 out_dma = 0;
2493                 /* fall through */
2494         case PXA250_C0: case PXA210_C0:
2495                 break;
2496 #elif   defined(CONFIG_ARCH_IXP4XX)
2497         case IXP425_A0:
2498         case IXP425_B0:
2499         case IXP465_AD:
2500                 dev->has_cfr = 1;
2501                 out_dma = 0;
2502                 break;
2503 #endif
2504         default:
2505                 out_dma = 0;
2506                 printk(KERN_ERR "%s: unrecognized processor: %08x\n",
2507                         driver_name, chiprev);
2508                 /* iop3xx, ixp4xx, ... */
2509                 return -ENODEV;
2510         }
2511
2512         irq = platform_get_irq(pdev, 0);
2513         if (irq < 0)
2514                 return -ENODEV;
2515
2516         pr_debug("%s: IRQ %d%s%s%s\n", driver_name, irq,
2517                 dev->has_cfr ? "" : " (!cfr)",
2518                 out_dma ? "" : " (broken dma-out)",
2519                 SIZE_STR DMASTR
2520                 );
2521
2522 #ifdef  USE_DMA
2523 #ifndef USE_OUT_DMA
2524         out_dma = 0;
2525 #endif
2526         /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */
2527         if (!out_dma) {
2528                 DMSG("disabled OUT dma\n");
2529                 dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0;
2530                 dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0;
2531                 dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0;
2532         }
2533 #endif
2534
2535         /* other non-static parts of init */
2536         dev->dev = &pdev->dev;
2537         dev->mach = pdev->dev.platform_data;
2538         if (dev->mach->gpio_vbus) {
2539                 udc_gpio_init_vbus(dev->mach->gpio_vbus);
2540                 vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus);
2541                 set_irq_type(vbus_irq, IRQT_BOTHEDGE);
2542         } else
2543                 vbus_irq = 0;
2544         if (dev->mach->gpio_pullup)
2545                 udc_gpio_init_pullup(dev->mach->gpio_pullup);
2546
2547         init_timer(&dev->timer);
2548         dev->timer.function = udc_watchdog;
2549         dev->timer.data = (unsigned long) dev;
2550
2551         device_initialize(&dev->gadget.dev);
2552         dev->gadget.dev.parent = &pdev->dev;
2553         dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
2554
2555         the_controller = dev;
2556         platform_set_drvdata(pdev, dev);
2557
2558         udc_disable(dev);
2559         udc_reinit(dev);
2560
2561         dev->vbus = is_vbus_present();
2562
2563         /* irq setup after old hardware state is cleaned up */
2564         retval = request_irq(irq, pxa2xx_udc_irq,
2565                         IRQF_DISABLED, driver_name, dev);
2566         if (retval != 0) {
2567                 printk(KERN_ERR "%s: can't get irq %d, err %d\n",
2568                         driver_name, irq, retval);
2569                 return -EBUSY;
2570         }
2571         dev->got_irq = 1;
2572
2573 #ifdef CONFIG_ARCH_LUBBOCK
2574         if (machine_is_lubbock()) {
2575                 retval = request_irq(LUBBOCK_USB_DISC_IRQ,
2576                                 lubbock_vbus_irq,
2577                                 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
2578                                 driver_name, dev);
2579                 if (retval != 0) {
2580                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2581                                 driver_name, LUBBOCK_USB_DISC_IRQ, retval);
2582 lubbock_fail0:
2583                         free_irq(irq, dev);
2584                         return -EBUSY;
2585                 }
2586                 retval = request_irq(LUBBOCK_USB_IRQ,
2587                                 lubbock_vbus_irq,
2588                                 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
2589                                 driver_name, dev);
2590                 if (retval != 0) {
2591                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2592                                 driver_name, LUBBOCK_USB_IRQ, retval);
2593                         free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2594                         goto lubbock_fail0;
2595                 }
2596 #ifdef DEBUG
2597                 /* with U-Boot (but not BLOB), hex is off by default */
2598                 HEX_DISPLAY(dev->stats.irqs);
2599                 LUB_DISC_BLNK_LED &= 0xff;
2600 #endif
2601         } else
2602 #endif
2603         if (vbus_irq) {
2604                 retval = request_irq(vbus_irq, udc_vbus_irq,
2605                                 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
2606                                 driver_name, dev);
2607                 if (retval != 0) {
2608                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2609                                 driver_name, vbus_irq, retval);
2610                         free_irq(irq, dev);
2611                         return -EBUSY;
2612                 }
2613         }
2614         create_proc_files();
2615
2616         return 0;
2617 }
2618
2619 static void pxa2xx_udc_shutdown(struct platform_device *_dev)
2620 {
2621         pullup_off();
2622 }
2623
2624 static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
2625 {
2626         struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
2627
2628         if (dev->driver)
2629                 return -EBUSY;
2630
2631         udc_disable(dev);
2632         remove_proc_files();
2633
2634         if (dev->got_irq) {
2635                 free_irq(platform_get_irq(pdev, 0), dev);
2636                 dev->got_irq = 0;
2637         }
2638 #ifdef CONFIG_ARCH_LUBBOCK
2639         if (machine_is_lubbock()) {
2640                 free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2641                 free_irq(LUBBOCK_USB_IRQ, dev);
2642         }
2643 #endif
2644         if (dev->mach->gpio_vbus)
2645                 free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev);
2646         platform_set_drvdata(pdev, NULL);
2647         the_controller = NULL;
2648         return 0;
2649 }
2650
2651 /*-------------------------------------------------------------------------*/
2652
2653 #ifdef  CONFIG_PM
2654
2655 /* USB suspend (controlled by the host) and system suspend (controlled
2656  * by the PXA) don't necessarily work well together.  If USB is active,
2657  * the 48 MHz clock is required; so the system can't enter 33 MHz idle
2658  * mode, or any deeper PM saving state.
2659  *
2660  * For now, we punt and forcibly disconnect from the USB host when PXA
2661  * enters any suspend state.  While we're disconnected, we always disable
2662  * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
2663  * Boards without software pullup control shouldn't use those states.
2664  * VBUS IRQs should probably be ignored so that the PXA device just acts
2665  * "dead" to USB hosts until system resume.
2666  */
2667 static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
2668 {
2669         struct pxa2xx_udc       *udc = platform_get_drvdata(dev);
2670
2671         if (!udc->mach->udc_command)
2672                 WARN("USB host won't detect disconnect!\n");
2673         pullup(udc, 0);
2674
2675         return 0;
2676 }
2677
2678 static int pxa2xx_udc_resume(struct platform_device *dev)
2679 {
2680         struct pxa2xx_udc       *udc = platform_get_drvdata(dev);
2681
2682         pullup(udc, 1);
2683
2684         return 0;
2685 }
2686
2687 #else
2688 #define pxa2xx_udc_suspend      NULL
2689 #define pxa2xx_udc_resume       NULL
2690 #endif
2691
2692 /*-------------------------------------------------------------------------*/
2693
2694 static struct platform_driver udc_driver = {
2695         .shutdown       = pxa2xx_udc_shutdown,
2696         .remove         = __exit_p(pxa2xx_udc_remove),
2697         .suspend        = pxa2xx_udc_suspend,
2698         .resume         = pxa2xx_udc_resume,
2699         .driver         = {
2700                 .owner  = THIS_MODULE,
2701                 .name   = "pxa2xx-udc",
2702         },
2703 };
2704
2705 static int __init udc_init(void)
2706 {
2707         printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
2708         return platform_driver_probe(&udc_driver, pxa2xx_udc_probe);
2709 }
2710 module_init(udc_init);
2711
2712 static void __exit udc_exit(void)
2713 {
2714         platform_driver_unregister(&udc_driver);
2715 }
2716 module_exit(udc_exit);
2717
2718 MODULE_DESCRIPTION(DRIVER_DESC);
2719 MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
2720 MODULE_LICENSE("GPL");
2721