drivers/ssb/driver_chipcommon.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Broadcom ChipCommon core driver
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include <linux/ssb/ssb.h>
  12 #include <linux/ssb/ssb_regs.h>
  13 #include <linux/export.h>
  14 #include <linux/pci.h>
  15
  16 #include "ssb_private.h"
  17
  18
  19 /* Clock sources */
  20 enum ssb_clksrc {
  21         /* PCI clock */
  22         SSB_CHIPCO_CLKSRC_PCI,
  23         /* Crystal slow clock oscillator */
  24         SSB_CHIPCO_CLKSRC_XTALOS,
  25         /* Low power oscillator */
  26         SSB_CHIPCO_CLKSRC_LOPWROS,
  27 };
  28
  29
  30 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
  31                                         u32 mask, u32 value)
  32 {
  33         value &= mask;
  34         value |= chipco_read32(cc, offset) & ~mask;
  35         chipco_write32(cc, offset, value);
  36
  37         return value;
  38 }
  39
  40 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  41                               enum ssb_clkmode mode)
  42 {
  43         struct ssb_device *ccdev = cc->dev;
  44         struct ssb_bus *bus;
  45         u32 tmp;
  46
  47         if (!ccdev)
  48                 return;
  49         bus = ccdev->bus;
  50
  51         /* We support SLOW only on 6..9 */
  52         if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW)
  53                 mode = SSB_CLKMODE_DYNAMIC;
  54
  55         if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
  56                 return; /* PMU controls clockmode, separated function needed */
  57         SSB_WARN_ON(ccdev->id.revision >= 20);
  58
  59         /* chipcommon cores prior to rev6 don't support dynamic clock control */
  60         if (ccdev->id.revision < 6)
  61                 return;
  62
  63         /* ChipCommon cores rev10+ need testing */
  64         if (ccdev->id.revision >= 10)
  65                 return;
  66
  67         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
  68                 return;
  69
  70         switch (mode) {
  71         case SSB_CLKMODE_SLOW: /* For revs 6..9 only */
  72                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  73                 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  74                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
  75                 break;
  76         case SSB_CLKMODE_FAST:
  77                 if (ccdev->id.revision < 10) {
  78                         ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
  79                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  80                         tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  81                         tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
  82                         chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
  83                 } else {
  84                         chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
  85                                 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) |
  86                                  SSB_CHIPCO_SYSCLKCTL_FORCEHT));
  87                         /* udelay(150); TODO: not available in early init */
  88                 }
  89                 break;
  90         case SSB_CLKMODE_DYNAMIC:
  91                 if (ccdev->id.revision < 10) {
  92                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
  93                         tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
  94                         tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
  95                         tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
  96                         if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) !=
  97                             SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
  98                                 tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
  99                         chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
 100
 101                         /* For dynamic control, we have to release our xtal_pu
 102                          * "force on" */
 103                         if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
 104                                 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
 105                 } else {
 106                         chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
 107                                 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
 108                                  ~SSB_CHIPCO_SYSCLKCTL_FORCEHT));
 109                 }
 110                 break;
 111         default:
 112                 SSB_WARN_ON(1);
 113         }
 114 }
 115
 116 /* Get the Slow Clock Source */
 117 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 118 {
 119         struct ssb_bus *bus = cc->dev->bus;
 120         u32 uninitialized_var(tmp);
 121
 122         if (cc->dev->id.revision < 6) {
 123                 if (bus->bustype == SSB_BUSTYPE_SSB ||
 124                     bus->bustype == SSB_BUSTYPE_PCMCIA)
 125                         return SSB_CHIPCO_CLKSRC_XTALOS;
 126                 if (bus->bustype == SSB_BUSTYPE_PCI) {
 127                         pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
 128                         if (tmp & 0x10)
 129                                 return SSB_CHIPCO_CLKSRC_PCI;
 130                         return SSB_CHIPCO_CLKSRC_XTALOS;
 131                 }
 132         }
 133         if (cc->dev->id.revision < 10) {
 134                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 135                 tmp &= 0x7;
 136                 if (tmp == 0)
 137                         return SSB_CHIPCO_CLKSRC_LOPWROS;
 138                 if (tmp == 1)
 139                         return SSB_CHIPCO_CLKSRC_XTALOS;
 140                 if (tmp == 2)
 141                         return SSB_CHIPCO_CLKSRC_PCI;
 142         }
 143
 144         return SSB_CHIPCO_CLKSRC_XTALOS;
 145 }
 146
 147 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
 148 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 149 {
 150         int uninitialized_var(limit);
 151         enum ssb_clksrc clocksrc;
 152         int divisor = 1;
 153         u32 tmp;
 154
 155         clocksrc = chipco_pctl_get_slowclksrc(cc);
 156         if (cc->dev->id.revision < 6) {
 157                 switch (clocksrc) {
 158                 case SSB_CHIPCO_CLKSRC_PCI:
 159                         divisor = 64;
 160                         break;
 161                 case SSB_CHIPCO_CLKSRC_XTALOS:
 162                         divisor = 32;
 163                         break;
 164                 default:
 165                         SSB_WARN_ON(1);
 166                 }
 167         } else if (cc->dev->id.revision < 10) {
 168                 switch (clocksrc) {
 169                 case SSB_CHIPCO_CLKSRC_LOPWROS:
 170                         break;
 171                 case SSB_CHIPCO_CLKSRC_XTALOS:
 172                 case SSB_CHIPCO_CLKSRC_PCI:
 173                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
 174                         divisor = (tmp >> 16) + 1;
 175                         divisor *= 4;
 176                         break;
 177                 }
 178         } else {
 179                 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
 180                 divisor = (tmp >> 16) + 1;
 181                 divisor *= 4;
 182         }
 183
 184         switch (clocksrc) {
 185         case SSB_CHIPCO_CLKSRC_LOPWROS:
 186                 if (get_max)
 187                         limit = 43000;
 188                 else
 189                         limit = 25000;
 190                 break;
 191         case SSB_CHIPCO_CLKSRC_XTALOS:
 192                 if (get_max)
 193                         limit = 20200000;
 194                 else
 195                         limit = 19800000;
 196                 break;
 197         case SSB_CHIPCO_CLKSRC_PCI:
 198                 if (get_max)
 199                         limit = 34000000;
 200                 else
 201                         limit = 25000000;
 202                 break;
 203         }
 204         limit /= divisor;
 205
 206         return limit;
 207 }
 208
 209 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
 210 {
 211         struct ssb_bus *bus = cc->dev->bus;
 212
 213         if (bus->chip_id == 0x4321) {
 214                 if (bus->chip_rev == 0)
 215                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
 216                 else if (bus->chip_rev == 1)
 217                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
 218         }
 219
 220         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 221                 return;
 222
 223         if (cc->dev->id.revision >= 10) {
 224                 /* Set Idle Power clock rate to 1Mhz */
 225                 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
 226                                (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
 227                                 0x0000FFFF) | 0x00040000);
 228         } else {
 229                 int maxfreq;
 230
 231                 maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
 232                 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
 233                                (maxfreq * 150 + 999999) / 1000000);
 234                 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
 235                                (maxfreq * 15 + 999999) / 1000000);
 236         }
 237 }
 238
 239 /* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
 240 static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
 241 {
 242         struct ssb_bus *bus = cc->dev->bus;
 243
 244         switch (bus->chip_id) {
 245         case 0x4312:
 246         case 0x4322:
 247         case 0x4328:
 248                 return 7000;
 249         case 0x4325:
 250                 /* TODO: */
 251         default:
 252                 return 15000;
 253         }
 254 }
 255
 256 /* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
 257 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
 258 {
 259         struct ssb_bus *bus = cc->dev->bus;
 260         int minfreq;
 261         unsigned int tmp;
 262         u32 pll_on_delay;
 263
 264         if (bus->bustype != SSB_BUSTYPE_PCI)
 265                 return;
 266
 267         if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
 268                 cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
 269                 return;
 270         }
 271
 272         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 273                 return;
 274
 275         minfreq = chipco_pctl_clockfreqlimit(cc, 0);
 276         pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
 277         tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
 278         SSB_WARN_ON(tmp & ~0xFFFF);
 279
 280         cc->fast_pwrup_delay = tmp;
 281 }
 282
 283 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
 284 {
 285         if (!cc->dev)
 286                 return; /* We don't have a ChipCommon */
 287         if (cc->dev->id.revision >= 11)
 288                 cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
 289         ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
 290
 291         if (cc->dev->id.revision >= 20) {
 292                 chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
 293                 chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0);
 294         }
 295
 296         ssb_pmu_init(cc);
 297         chipco_powercontrol_init(cc);
 298         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 299         calc_fast_powerup_delay(cc);
 300 }
 301
 302 void ssb_chipco_suspend(struct ssb_chipcommon *cc)
 303 {
 304         if (!cc->dev)
 305                 return;
 306         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
 307 }
 308
 309 void ssb_chipco_resume(struct ssb_chipcommon *cc)
 310 {
 311         if (!cc->dev)
 312                 return;
 313         chipco_powercontrol_init(cc);
 314         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 315 }
 316
 317 /* Get the processor clock */
 318 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
 319                              u32 *plltype, u32 *n, u32 *m)
 320 {
 321         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 322         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 323         switch (*plltype) {
 324         case SSB_PLLTYPE_2:
 325         case SSB_PLLTYPE_4:
 326         case SSB_PLLTYPE_6:
 327         case SSB_PLLTYPE_7:
 328                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 329                 break;
 330         case SSB_PLLTYPE_3:
 331                 /* 5350 uses m2 to control mips */
 332                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 333                 break;
 334         default:
 335                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 336                 break;
 337         }
 338 }
 339
 340 /* Get the bus clock */
 341 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
 342                                  u32 *plltype, u32 *n, u32 *m)
 343 {
 344         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
 345         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 346         switch (*plltype) {
 347         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 348                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
 349                 break;
 350         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 351                 if (cc->dev->bus->chip_id != 0x5365) {
 352                         *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
 353                         break;
 354                 }
 355                 /* Fallthough */
 356         default:
 357                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
 358         }
 359 }
 360
 361 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 362                             unsigned long ns)
 363 {
 364         struct ssb_device *dev = cc->dev;
 365         struct ssb_bus *bus = dev->bus;
 366         u32 tmp;
 367
 368         /* set register for external IO to control LED. */
 369         chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
 370         tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;            /* Waitcount-3 = 10ns */
 371         tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;   /* Waitcount-1 = 40ns */
 372         tmp |= DIV_ROUND_UP(240, ns);                           /* Waitcount-0 = 240ns */
 373         chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);       /* 0x01020a0c for a 100Mhz clock */
 374
 375         /* Set timing for the flash */
 376         tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;   /* Waitcount-3 = 10nS */
 377         tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;  /* Waitcount-1 = 10nS */
 378         tmp |= DIV_ROUND_UP(120, ns);                           /* Waitcount-0 = 120nS */
 379         if ((bus->chip_id == 0x5365) ||
 380             (dev->id.revision < 9))
 381                 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
 382         if ((bus->chip_id == 0x5365) ||
 383             (dev->id.revision < 9) ||
 384             ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
 385                 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
 386
 387         if (bus->chip_id == 0x5350) {
 388                 /* Enable EXTIF */
 389                 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;      /* Waitcount-3 = 10ns */
 390                 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
 391                 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
 392                 tmp |= DIV_ROUND_UP(120, ns);                     /* Waitcount-0 = 120ns */
 393                 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
 394         }
 395 }
 396
 397 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
 398 void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
 399 {
 400         /* instant NMI */
 401         chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
 402 }
 403
 404 void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
 405 {
 406         chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
 407 }
 408
 409 u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
 410 {
 411         return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
 412 }
 413
 414 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
 415 {
 416         return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
 417 }
 418
 419 u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
 420 {
 421         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
 422 }
 423
 424 u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
 425 {
 426         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
 427 }
 428
 429 u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
 430 {
 431         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
 432 }
 433 EXPORT_SYMBOL(ssb_chipco_gpio_control);
 434
 435 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
 436 {
 437         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
 438 }
 439
 440 u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
 441 {
 442         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
 443 }
 444
 445 #ifdef CONFIG_SSB_SERIAL
 446 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 447                            struct ssb_serial_port *ports)
 448 {
 449         struct ssb_bus *bus = cc->dev->bus;
 450         int nr_ports = 0;
 451         u32 plltype;
 452         unsigned int irq;
 453         u32 baud_base, div;
 454         u32 i, n;
 455         unsigned int ccrev = cc->dev->id.revision;
 456
 457         plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
 458         irq = ssb_mips_irq(cc->dev);
 459
 460         if (plltype == SSB_PLLTYPE_1) {
 461                 /* PLL clock */
 462                 baud_base = ssb_calc_clock_rate(plltype,
 463                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
 464                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
 465                 div = 1;
 466         } else {
 467                 if (ccrev == 20) {
 468                         /* BCM5354 uses constant 25MHz clock */
 469                         baud_base = 25000000;
 470                         div = 48;
 471                         /* Set the override bit so we don't divide it */
 472                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
 473                                        chipco_read32(cc, SSB_CHIPCO_CORECTL)
 474                                        | SSB_CHIPCO_CORECTL_UARTCLK0);
 475                 } else if ((ccrev >= 11) && (ccrev != 15)) {
 476                         /* Fixed ALP clock */
 477                         baud_base = 20000000;
 478                         if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
 479                                 /* FIXME: baud_base is different for devices with a PMU */
 480                                 SSB_WARN_ON(1);
 481                         }
 482                         div = 1;
 483                         if (ccrev >= 21) {
 484                                 /* Turn off UART clock before switching clocksource. */
 485                                 chipco_write32(cc, SSB_CHIPCO_CORECTL,
 486                                                chipco_read32(cc, SSB_CHIPCO_CORECTL)
 487                                                & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
 488                         }
 489                         /* Set the override bit so we don't divide it */
 490                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
 491                                        chipco_read32(cc, SSB_CHIPCO_CORECTL)
 492                                        | SSB_CHIPCO_CORECTL_UARTCLK0);
 493                         if (ccrev >= 21) {
 494                                 /* Re-enable the UART clock. */
 495                                 chipco_write32(cc, SSB_CHIPCO_CORECTL,
 496                                                chipco_read32(cc, SSB_CHIPCO_CORECTL)
 497                                                | SSB_CHIPCO_CORECTL_UARTCLKEN);
 498                         }
 499                 } else if (ccrev >= 3) {
 500                         /* Internal backplane clock */
 501                         baud_base = ssb_clockspeed(bus);
 502                         div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
 503                               & SSB_CHIPCO_CLKDIV_UART;
 504                 } else {
 505                         /* Fixed internal backplane clock */
 506                         baud_base = 88000000;
 507                         div = 48;
 508                 }
 509
 510                 /* Clock source depends on strapping if UartClkOverride is unset */
 511                 if ((ccrev > 0) &&
 512                     !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
 513                         if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
 514                             SSB_CHIPCO_CAP_UARTCLK_INT) {
 515                                 /* Internal divided backplane clock */
 516                                 baud_base /= div;
 517                         } else {
 518                                 /* Assume external clock of 1.8432 MHz */
 519                                 baud_base = 1843200;
 520                         }
 521                 }
 522         }
 523
 524         /* Determine the registers of the UARTs */
 525         n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
 526         for (i = 0; i < n; i++) {
 527                 void __iomem *cc_mmio;
 528                 void __iomem *uart_regs;
 529
 530                 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
 531                 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
 532                 /* Offset changed at after rev 0 */
 533                 if (ccrev == 0)
 534                         uart_regs += (i * 8);
 535                 else
 536                         uart_regs += (i * 256);
 537
 538                 nr_ports++;
 539                 ports[i].regs = uart_regs;
 540                 ports[i].irq = irq;
 541                 ports[i].baud_base = baud_base;
 542                 ports[i].reg_shift = 0;
 543         }
 544
 545         return nr_ports;
 546 }
 547 #endif /* CONFIG_SSB_SERIAL */