drivers/scsi/qla2xxx/qla_os.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/moduleparam.h>
  10 #include <linux/vmalloc.h>
  11 #include <linux/delay.h>
  12 #include <linux/kthread.h>
  13
  14 #include <scsi/scsi_tcq.h>
  15 #include <scsi/scsicam.h>
  16 #include <scsi/scsi_transport.h>
  17 #include <scsi/scsi_transport_fc.h>
  18
  19 /*
  20  * Driver version
  21  */
  22 char qla2x00_version_str[40];
  23
  24 /*
  25  * SRB allocation cache
  26  */
  27 static struct kmem_cache *srb_cachep;
  28
  29 /*
  30  * Ioctl related information.
  31  */
  32 static int num_hosts;
  33
  34 int ql2xlogintimeout = 20;
  35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
  36 MODULE_PARM_DESC(ql2xlogintimeout,
  37                 "Login timeout value in seconds.");
  38
  39 int qlport_down_retry = 30;
  40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
  41 MODULE_PARM_DESC(qlport_down_retry,
  42                 "Maximum number of command retries to a port that returns "
  43                 "a PORT-DOWN status.");
  44
  45 int ql2xplogiabsentdevice;
  46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
  47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
  48                 "Option to enable PLOGI to devices that are not present after "
  49                 "a Fabric scan.  This is needed for several broken switches. "
  50                 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
  51
  52 int ql2xloginretrycount = 0;
  53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
  54 MODULE_PARM_DESC(ql2xloginretrycount,
  55                 "Specify an alternate value for the NVRAM login retry count.");
  56
  57 int ql2xallocfwdump = 1;
  58 module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
  59 MODULE_PARM_DESC(ql2xallocfwdump,
  60                 "Option to enable allocation of memory for a firmware dump "
  61                 "during HBA initialization.  Memory allocation requirements "
  62                 "vary by ISP type.  Default is 1 - allocate memory.");
  63
  64 int ql2xextended_error_logging;
  65 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
  66 MODULE_PARM_DESC(ql2xextended_error_logging,
  67                 "Option to enable extended error logging, "
  68                 "Default is 0 - no logging. 1 - log errors.");
  69
  70 static void qla2x00_free_device(scsi_qla_host_t *);
  71
  72 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
  73
  74 int ql2xfdmienable;
  75 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
  76 MODULE_PARM_DESC(ql2xfdmienable,
  77                 "Enables FDMI registratons "
  78                 "Default is 0 - no FDMI. 1 - perfom FDMI.");
  79
  80 #define MAX_Q_DEPTH    32
  81 static int ql2xmaxqdepth = MAX_Q_DEPTH;
  82 module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
  83 MODULE_PARM_DESC(ql2xmaxqdepth,
  84                 "Maximum queue depth to report for target devices.");
  85
  86 int ql2xqfullrampup = 120;
  87 module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
  88 MODULE_PARM_DESC(ql2xqfullrampup,
  89                 "Number of seconds to wait to begin to ramp-up the queue "
  90                 "depth for a device after a queue-full condition has been "
  91                 "detected.  Default is 120 seconds.");
  92
  93 /*
  94  * SCSI host template entry points
  95  */
  96 static int qla2xxx_slave_configure(struct scsi_device * device);
  97 static int qla2xxx_slave_alloc(struct scsi_device *);
  98 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
  99 static void qla2xxx_scan_start(struct Scsi_Host *);
 100 static void qla2xxx_slave_destroy(struct scsi_device *);
 101 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
 102                 void (*fn)(struct scsi_cmnd *));
 103 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
 104                 void (*fn)(struct scsi_cmnd *));
 105 static int qla2xxx_eh_abort(struct scsi_cmnd *);
 106 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
 107 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
 108 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
 109 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
 110 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
 111
 112 static int qla2x00_change_queue_depth(struct scsi_device *, int);
 113 static int qla2x00_change_queue_type(struct scsi_device *, int);
 114
 115 static struct scsi_host_template qla2x00_driver_template = {
 116         .module                 = THIS_MODULE,
 117         .name                   = QLA2XXX_DRIVER_NAME,
 118         .queuecommand           = qla2x00_queuecommand,
 119
 120         .eh_abort_handler       = qla2xxx_eh_abort,
 121         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 122         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 123         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 124
 125         .slave_configure        = qla2xxx_slave_configure,
 126
 127         .slave_alloc            = qla2xxx_slave_alloc,
 128         .slave_destroy          = qla2xxx_slave_destroy,
 129         .scan_finished          = qla2xxx_scan_finished,
 130         .scan_start             = qla2xxx_scan_start,
 131         .change_queue_depth     = qla2x00_change_queue_depth,
 132         .change_queue_type      = qla2x00_change_queue_type,
 133         .this_id                = -1,
 134         .cmd_per_lun            = 3,
 135         .use_clustering         = ENABLE_CLUSTERING,
 136         .sg_tablesize           = SG_ALL,
 137
 138         /*
 139          * The RISC allows for each command to transfer (2^32-1) bytes of data,
 140          * which equates to 0x800000 sectors.
 141          */
 142         .max_sectors            = 0xFFFF,
 143         .shost_attrs            = qla2x00_host_attrs,
 144 };
 145
 146 static struct scsi_host_template qla24xx_driver_template = {
 147         .module                 = THIS_MODULE,
 148         .name                   = QLA2XXX_DRIVER_NAME,
 149         .queuecommand           = qla24xx_queuecommand,
 150
 151         .eh_abort_handler       = qla2xxx_eh_abort,
 152         .eh_device_reset_handler = qla2xxx_eh_device_reset,
 153         .eh_bus_reset_handler   = qla2xxx_eh_bus_reset,
 154         .eh_host_reset_handler  = qla2xxx_eh_host_reset,
 155
 156         .slave_configure        = qla2xxx_slave_configure,
 157
 158         .slave_alloc            = qla2xxx_slave_alloc,
 159         .slave_destroy          = qla2xxx_slave_destroy,
 160         .change_queue_depth     = qla2x00_change_queue_depth,
 161         .change_queue_type      = qla2x00_change_queue_type,
 162         .this_id                = -1,
 163         .cmd_per_lun            = 3,
 164         .use_clustering         = ENABLE_CLUSTERING,
 165         .sg_tablesize           = SG_ALL,
 166
 167         .max_sectors            = 0xFFFF,
 168         .shost_attrs            = qla2x00_host_attrs,
 169 };
 170
 171 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
 172
 173 /* TODO Convert to inlines
 174  *
 175  * Timer routines
 176  */
 177 #define WATCH_INTERVAL          1       /* number of seconds */
 178
 179 static void qla2x00_timer(scsi_qla_host_t *);
 180
 181 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
 182     void *, unsigned long);
 183 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
 184 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
 185
 186 static inline void
 187 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
 188 {
 189         init_timer(&ha->timer);
 190         ha->timer.expires = jiffies + interval * HZ;
 191         ha->timer.data = (unsigned long)ha;
 192         ha->timer.function = (void (*)(unsigned long))func;
 193         add_timer(&ha->timer);
 194         ha->timer_active = 1;
 195 }
 196
 197 static inline void
 198 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
 199 {
 200         mod_timer(&ha->timer, jiffies + interval * HZ);
 201 }
 202
 203 static __inline__ void
 204 qla2x00_stop_timer(scsi_qla_host_t *ha)
 205 {
 206         del_timer_sync(&ha->timer);
 207         ha->timer_active = 0;
 208 }
 209
 210 static int qla2x00_do_dpc(void *data);
 211
 212 static void qla2x00_rst_aen(scsi_qla_host_t *);
 213
 214 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
 215 static void qla2x00_mem_free(scsi_qla_host_t *ha);
 216 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
 217 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
 218 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
 219 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
 220
 221 /* -------------------------------------------------------------------------- */
 222
 223 static char *
 224 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
 225 {
 226         static char *pci_bus_modes[] = {
 227                 "33", "66", "100", "133",
 228         };
 229         uint16_t pci_bus;
 230
 231         strcpy(str, "PCI");
 232         pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
 233         if (pci_bus) {
 234                 strcat(str, "-X (");
 235                 strcat(str, pci_bus_modes[pci_bus]);
 236         } else {
 237                 pci_bus = (ha->pci_attr & BIT_8) >> 8;
 238                 strcat(str, " (");
 239                 strcat(str, pci_bus_modes[pci_bus]);
 240         }
 241         strcat(str, " MHz)");
 242
 243         return (str);
 244 }
 245
 246 static char *
 247 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
 248 {
 249         static char *pci_bus_modes[] = { "33", "66", "100", "133", };
 250         uint32_t pci_bus;
 251         int pcie_reg;
 252
 253         pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
 254         if (pcie_reg) {
 255                 char lwstr[6];
 256                 uint16_t pcie_lstat, lspeed, lwidth;
 257
 258                 pcie_reg += 0x12;
 259                 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
 260                 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
 261                 lwidth = (pcie_lstat &
 262                     (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
 263
 264                 strcpy(str, "PCIe (");
 265                 if (lspeed == 1)
 266                         strcat(str, "2.5Gb/s ");
 267                 else
 268                         strcat(str, "<unknown> ");
 269                 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
 270                 strcat(str, lwstr);
 271
 272                 return str;
 273         }
 274
 275         strcpy(str, "PCI");
 276         pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
 277         if (pci_bus == 0 || pci_bus == 8) {
 278                 strcat(str, " (");
 279                 strcat(str, pci_bus_modes[pci_bus >> 3]);
 280         } else {
 281                 strcat(str, "-X ");
 282                 if (pci_bus & BIT_2)
 283                         strcat(str, "Mode 2");
 284                 else
 285                         strcat(str, "Mode 1");
 286                 strcat(str, " (");
 287                 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
 288         }
 289         strcat(str, " MHz)");
 290
 291         return str;
 292 }
 293
 294 static char *
 295 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 296 {
 297         char un_str[10];
 298
 299         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 300             ha->fw_minor_version,
 301             ha->fw_subminor_version);
 302
 303         if (ha->fw_attributes & BIT_9) {
 304                 strcat(str, "FLX");
 305                 return (str);
 306         }
 307
 308         switch (ha->fw_attributes & 0xFF) {
 309         case 0x7:
 310                 strcat(str, "EF");
 311                 break;
 312         case 0x17:
 313                 strcat(str, "TP");
 314                 break;
 315         case 0x37:
 316                 strcat(str, "IP");
 317                 break;
 318         case 0x77:
 319                 strcat(str, "VI");
 320                 break;
 321         default:
 322                 sprintf(un_str, "(%x)", ha->fw_attributes);
 323                 strcat(str, un_str);
 324                 break;
 325         }
 326         if (ha->fw_attributes & 0x100)
 327                 strcat(str, "X");
 328
 329         return (str);
 330 }
 331
 332 static char *
 333 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 334 {
 335         sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
 336             ha->fw_minor_version,
 337             ha->fw_subminor_version);
 338
 339         if (ha->fw_attributes & BIT_0)
 340                 strcat(str, "[Class 2] ");
 341         if (ha->fw_attributes & BIT_1)
 342                 strcat(str, "[IP] ");
 343         if (ha->fw_attributes & BIT_2)
 344                 strcat(str, "[Multi-ID] ");
 345         if (ha->fw_attributes & BIT_13)
 346                 strcat(str, "[Experimental]");
 347         return str;
 348 }
 349
 350 static inline srb_t *
 351 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
 352     struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 353 {
 354         srb_t *sp;
 355
 356         sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
 357         if (!sp)
 358                 return sp;
 359
 360         sp->ha = ha;
 361         sp->fcport = fcport;
 362         sp->cmd = cmd;
 363         sp->flags = 0;
 364         CMD_SP(cmd) = (void *)sp;
 365         cmd->scsi_done = done;
 366
 367         return sp;
 368 }
 369
 370 static int
 371 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 372 {
 373         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 374         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 375         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 376         srb_t *sp;
 377         int rval;
 378
 379         rval = fc_remote_port_chkready(rport);
 380         if (rval) {
 381                 cmd->result = rval;
 382                 goto qc_fail_command;
 383         }
 384
 385         /* Close window on fcport/rport state-transitioning. */
 386         if (!*(fc_port_t **)rport->dd_data) {
 387                 cmd->result = DID_IMM_RETRY << 16;
 388                 goto qc_fail_command;
 389         }
 390
 391         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 392                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 393                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 394                         cmd->result = DID_NO_CONNECT << 16;
 395                         goto qc_fail_command;
 396                 }
 397                 goto qc_host_busy;
 398         }
 399
 400         spin_unlock_irq(ha->host->host_lock);
 401
 402         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 403         if (!sp)
 404                 goto qc_host_busy_lock;
 405
 406         rval = qla2x00_start_scsi(sp);
 407         if (rval != QLA_SUCCESS)
 408                 goto qc_host_busy_free_sp;
 409
 410         spin_lock_irq(ha->host->host_lock);
 411
 412         return 0;
 413
 414 qc_host_busy_free_sp:
 415         qla2x00_sp_free_dma(ha, sp);
 416         mempool_free(sp, ha->srb_mempool);
 417
 418 qc_host_busy_lock:
 419         spin_lock_irq(ha->host->host_lock);
 420
 421 qc_host_busy:
 422         return SCSI_MLQUEUE_HOST_BUSY;
 423
 424 qc_fail_command:
 425         done(cmd);
 426
 427         return 0;
 428 }
 429
 430
 431 static int
 432 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 433 {
 434         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 435         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 436         struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
 437         srb_t *sp;
 438         int rval;
 439
 440         rval = fc_remote_port_chkready(rport);
 441         if (rval) {
 442                 cmd->result = rval;
 443                 goto qc24_fail_command;
 444         }
 445
 446         /* Close window on fcport/rport state-transitioning. */
 447         if (!*(fc_port_t **)rport->dd_data) {
 448                 cmd->result = DID_IMM_RETRY << 16;
 449                 goto qc24_fail_command;
 450         }
 451
 452         if (atomic_read(&fcport->state) != FCS_ONLINE) {
 453                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
 454                     atomic_read(&ha->loop_state) == LOOP_DEAD) {
 455                         cmd->result = DID_NO_CONNECT << 16;
 456                         goto qc24_fail_command;
 457                 }
 458                 goto qc24_host_busy;
 459         }
 460
 461         spin_unlock_irq(ha->host->host_lock);
 462
 463         sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
 464         if (!sp)
 465                 goto qc24_host_busy_lock;
 466
 467         rval = qla24xx_start_scsi(sp);
 468         if (rval != QLA_SUCCESS)
 469                 goto qc24_host_busy_free_sp;
 470
 471         spin_lock_irq(ha->host->host_lock);
 472
 473         return 0;
 474
 475 qc24_host_busy_free_sp:
 476         qla2x00_sp_free_dma(ha, sp);
 477         mempool_free(sp, ha->srb_mempool);
 478
 479 qc24_host_busy_lock:
 480         spin_lock_irq(ha->host->host_lock);
 481
 482 qc24_host_busy:
 483         return SCSI_MLQUEUE_HOST_BUSY;
 484
 485 qc24_fail_command:
 486         done(cmd);
 487
 488         return 0;
 489 }
 490
 491
 492 /*
 493  * qla2x00_eh_wait_on_command
 494  *    Waits for the command to be returned by the Firmware for some
 495  *    max time.
 496  *
 497  * Input:
 498  *    ha = actual ha whose done queue will contain the command
 499  *            returned by firmware.
 500  *    cmd = Scsi Command to wait on.
 501  *    flag = Abort/Reset(Bus or Device Reset)
 502  *
 503  * Return:
 504  *    Not Found : 0
 505  *    Found : 1
 506  */
 507 static int
 508 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
 509 {
 510 #define ABORT_POLLING_PERIOD    1000
 511 #define ABORT_WAIT_ITER         ((10 * 1000) / (ABORT_POLLING_PERIOD))
 512         unsigned long wait_iter = ABORT_WAIT_ITER;
 513         int ret = QLA_SUCCESS;
 514
 515         while (CMD_SP(cmd)) {
 516                 msleep(ABORT_POLLING_PERIOD);
 517
 518                 if (--wait_iter)
 519                         break;
 520         }
 521         if (CMD_SP(cmd))
 522                 ret = QLA_FUNCTION_FAILED;
 523
 524         return ret;
 525 }
 526
 527 /*
 528  * qla2x00_wait_for_hba_online
 529  *    Wait till the HBA is online after going through
 530  *    <= MAX_RETRIES_OF_ISP_ABORT  or
 531  *    finally HBA is disabled ie marked offline
 532  *
 533  * Input:
 534  *     ha - pointer to host adapter structure
 535  *
 536  * Note:
 537  *    Does context switching-Release SPIN_LOCK
 538  *    (if any) before calling this routine.
 539  *
 540  * Return:
 541  *    Success (Adapter is online) : 0
 542  *    Failed  (Adapter is offline/disabled) : 1
 543  */
 544 int
 545 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
 546 {
 547         int             return_status;
 548         unsigned long   wait_online;
 549
 550         wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 551         while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
 552             test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
 553             test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
 554             ha->dpc_active) && time_before(jiffies, wait_online)) {
 555
 556                 msleep(1000);
 557         }
 558         if (ha->flags.online)
 559                 return_status = QLA_SUCCESS;
 560         else
 561                 return_status = QLA_FUNCTION_FAILED;
 562
 563         DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
 564
 565         return (return_status);
 566 }
 567
 568 /*
 569  * qla2x00_wait_for_loop_ready
 570  *    Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
 571  *    to be in LOOP_READY state.
 572  * Input:
 573  *     ha - pointer to host adapter structure
 574  *
 575  * Note:
 576  *    Does context switching-Release SPIN_LOCK
 577  *    (if any) before calling this routine.
 578  *
 579  *
 580  * Return:
 581  *    Success (LOOP_READY) : 0
 582  *    Failed  (LOOP_NOT_READY) : 1
 583  */
 584 static inline int
 585 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 586 {
 587         int      return_status = QLA_SUCCESS;
 588         unsigned long loop_timeout ;
 589
 590         /* wait for 5 min at the max for loop to be ready */
 591         loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
 592
 593         while ((!atomic_read(&ha->loop_down_timer) &&
 594             atomic_read(&ha->loop_state) == LOOP_DOWN) ||
 595             atomic_read(&ha->loop_state) != LOOP_READY) {
 596                 if (atomic_read(&ha->loop_state) == LOOP_DEAD) {
 597                         return_status = QLA_FUNCTION_FAILED;
 598                         break;
 599                 }
 600                 msleep(1000);
 601                 if (time_after_eq(jiffies, loop_timeout)) {
 602                         return_status = QLA_FUNCTION_FAILED;
 603                         break;
 604                 }
 605         }
 606         return (return_status);
 607 }
 608
 609 static void
 610 qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 611 {
 612         struct Scsi_Host *shost = cmnd->device->host;
 613         struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
 614         unsigned long flags;
 615
 616         spin_lock_irqsave(shost->host_lock, flags);
 617         while (rport->port_state == FC_PORTSTATE_BLOCKED) {
 618                 spin_unlock_irqrestore(shost->host_lock, flags);
 619                 msleep(1000);
 620                 spin_lock_irqsave(shost->host_lock, flags);
 621         }
 622         spin_unlock_irqrestore(shost->host_lock, flags);
 623         return;
 624 }
 625
 626 /**************************************************************************
 627 * qla2xxx_eh_abort
 628 *
 629 * Description:
 630 *    The abort function will abort the specified command.
 631 *
 632 * Input:
 633 *    cmd = Linux SCSI command packet to be aborted.
 634 *
 635 * Returns:
 636 *    Either SUCCESS or FAILED.
 637 *
 638 * Note:
 639 *    Only return FAILED if command not returned by firmware.
 640 **************************************************************************/
 641 static int
 642 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 643 {
 644         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 645         srb_t *sp;
 646         int ret, i;
 647         unsigned int id, lun;
 648         unsigned long serial;
 649         unsigned long flags;
 650         int wait = 0;
 651
 652         qla2x00_block_error_handler(cmd);
 653
 654         if (!CMD_SP(cmd))
 655                 return SUCCESS;
 656
 657         ret = SUCCESS;
 658
 659         id = cmd->device->id;
 660         lun = cmd->device->lun;
 661         serial = cmd->serial_number;
 662
 663         /* Check active list for command command. */
 664         spin_lock_irqsave(&ha->hardware_lock, flags);
 665         for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 666                 sp = ha->outstanding_cmds[i];
 667
 668                 if (sp == NULL)
 669                         continue;
 670
 671                 if (sp->cmd != cmd)
 672                         continue;
 673
 674                 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
 675                     __func__, ha->host_no, sp, serial));
 676                 DEBUG3(qla2x00_print_scsi_cmd(cmd));
 677
 678                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
 679                 if (ha->isp_ops.abort_command(ha, sp)) {
 680                         DEBUG2(printk("%s(%ld): abort_command "
 681                             "mbx failed.\n", __func__, ha->host_no));
 682                 } else {
 683                         DEBUG3(printk("%s(%ld): abort_command "
 684                             "mbx success.\n", __func__, ha->host_no));
 685                         wait = 1;
 686                 }
 687                 spin_lock_irqsave(&ha->hardware_lock, flags);
 688
 689                 break;
 690         }
 691         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 692
 693         /* Wait for the command to be returned. */
 694         if (wait) {
 695                 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 696                         qla_printk(KERN_ERR, ha,
 697                             "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 698                             "%x.\n", ha->host_no, id, lun, serial, ret);
 699                         ret = FAILED;
 700                 }
 701         }
 702
 703         qla_printk(KERN_INFO, ha,
 704             "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
 705             ha->host_no, id, lun, wait, serial, ret);
 706
 707         return ret;
 708 }
 709
 710 /**************************************************************************
 711 * qla2x00_eh_wait_for_pending_target_commands
 712 *
 713 * Description:
 714 *    Waits for all the commands to come back from the specified target.
 715 *
 716 * Input:
 717 *    ha - pointer to scsi_qla_host structure.
 718 *    t  - target
 719 * Returns:
 720 *    Either SUCCESS or FAILED.
 721 *
 722 * Note:
 723 **************************************************************************/
 724 static int
 725 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 726 {
 727         int     cnt;
 728         int     status;
 729         srb_t           *sp;
 730         struct scsi_cmnd *cmd;
 731         unsigned long flags;
 732
 733         status = 0;
 734
 735         /*
 736          * Waiting for all commands for the designated target in the active
 737          * array
 738          */
 739         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 740                 spin_lock_irqsave(&ha->hardware_lock, flags);
 741                 sp = ha->outstanding_cmds[cnt];
 742                 if (sp) {
 743                         cmd = sp->cmd;
 744                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 745                         if (cmd->device->id == t) {
 746                                 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
 747                                         status = 1;
 748                                         break;
 749                                 }
 750                         }
 751                 } else {
 752                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 753                 }
 754         }
 755         return (status);
 756 }
 757
 758
 759 /**************************************************************************
 760 * qla2xxx_eh_device_reset
 761 *
 762 * Description:
 763 *    The device reset function will reset the target and abort any
 764 *    executing commands.
 765 *
 766 *    NOTE: The use of SP is undefined within this context.  Do *NOT*
 767 *          attempt to use this value, even if you determine it is
 768 *          non-null.
 769 *
 770 * Input:
 771 *    cmd = Linux SCSI command packet of the command that cause the
 772 *          bus device reset.
 773 *
 774 * Returns:
 775 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 776 *
 777 **************************************************************************/
 778 static int
 779 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 780 {
 781         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 782         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 783         int ret;
 784         unsigned int id, lun;
 785         unsigned long serial;
 786
 787         qla2x00_block_error_handler(cmd);
 788
 789         ret = FAILED;
 790
 791         id = cmd->device->id;
 792         lun = cmd->device->lun;
 793         serial = cmd->serial_number;
 794
 795         if (!fcport)
 796                 return ret;
 797
 798         qla_printk(KERN_INFO, ha,
 799             "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
 800
 801         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 802                 goto eh_dev_reset_done;
 803
 804         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 805                 if (qla2x00_device_reset(ha, fcport) == 0)
 806                         ret = SUCCESS;
 807
 808 #if defined(LOGOUT_AFTER_DEVICE_RESET)
 809                 if (ret == SUCCESS) {
 810                         if (fcport->flags & FC_FABRIC_DEVICE) {
 811                                 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
 812                                 qla2x00_mark_device_lost(ha, fcport, 0, 0);
 813                         }
 814                 }
 815 #endif
 816         } else {
 817                 DEBUG2(printk(KERN_INFO
 818                     "%s failed: loop not ready\n",__func__));
 819         }
 820
 821         if (ret == FAILED) {
 822                 DEBUG3(printk("%s(%ld): device reset failed\n",
 823                     __func__, ha->host_no));
 824                 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
 825                     __func__);
 826
 827                 goto eh_dev_reset_done;
 828         }
 829
 830         /* Flush outstanding commands. */
 831         if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
 832                 ret = FAILED;
 833         if (ret == FAILED) {
 834                 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
 835                     __func__, ha->host_no));
 836                 qla_printk(KERN_INFO, ha,
 837                     "%s: failed while waiting for commands\n", __func__);
 838         } else
 839                 qla_printk(KERN_INFO, ha,
 840                     "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
 841                     id, lun);
 842  eh_dev_reset_done:
 843         return ret;
 844 }
 845
 846 /**************************************************************************
 847 * qla2x00_eh_wait_for_pending_commands
 848 *
 849 * Description:
 850 *    Waits for all the commands to come back from the specified host.
 851 *
 852 * Input:
 853 *    ha - pointer to scsi_qla_host structure.
 854 *
 855 * Returns:
 856 *    1 : SUCCESS
 857 *    0 : FAILED
 858 *
 859 * Note:
 860 **************************************************************************/
 861 static int
 862 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 863 {
 864         int     cnt;
 865         int     status;
 866         srb_t           *sp;
 867         struct scsi_cmnd *cmd;
 868         unsigned long flags;
 869
 870         status = 1;
 871
 872         /*
 873          * Waiting for all commands for the designated target in the active
 874          * array
 875          */
 876         for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
 877                 spin_lock_irqsave(&ha->hardware_lock, flags);
 878                 sp = ha->outstanding_cmds[cnt];
 879                 if (sp) {
 880                         cmd = sp->cmd;
 881                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 882                         status = qla2x00_eh_wait_on_command(ha, cmd);
 883                         if (status == 0)
 884                                 break;
 885                 }
 886                 else {
 887                         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 888                 }
 889         }
 890         return (status);
 891 }
 892
 893
 894 /**************************************************************************
 895 * qla2xxx_eh_bus_reset
 896 *
 897 * Description:
 898 *    The bus reset function will reset the bus and abort any executing
 899 *    commands.
 900 *
 901 * Input:
 902 *    cmd = Linux SCSI command packet of the command that cause the
 903 *          bus reset.
 904 *
 905 * Returns:
 906 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 907 *
 908 **************************************************************************/
 909 static int
 910 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 911 {
 912         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 913         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 914         int ret;
 915         unsigned int id, lun;
 916         unsigned long serial;
 917
 918         qla2x00_block_error_handler(cmd);
 919
 920         ret = FAILED;
 921
 922         id = cmd->device->id;
 923         lun = cmd->device->lun;
 924         serial = cmd->serial_number;
 925
 926         if (!fcport)
 927                 return ret;
 928
 929         qla_printk(KERN_INFO, ha,
 930             "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
 931
 932         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
 933                 DEBUG2(printk("%s failed:board disabled\n",__func__));
 934                 goto eh_bus_reset_done;
 935         }
 936
 937         if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
 938                 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
 939                         ret = SUCCESS;
 940         }
 941         if (ret == FAILED)
 942                 goto eh_bus_reset_done;
 943
 944         /* Flush outstanding commands. */
 945         if (!qla2x00_eh_wait_for_pending_commands(ha))
 946                 ret = FAILED;
 947
 948 eh_bus_reset_done:
 949         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
 950             (ret == FAILED) ? "failed" : "succeded");
 951
 952         return ret;
 953 }
 954
 955 /**************************************************************************
 956 * qla2xxx_eh_host_reset
 957 *
 958 * Description:
 959 *    The reset function will reset the Adapter.
 960 *
 961 * Input:
 962 *      cmd = Linux SCSI command packet of the command that cause the
 963 *            adapter reset.
 964 *
 965 * Returns:
 966 *      Either SUCCESS or FAILED.
 967 *
 968 * Note:
 969 **************************************************************************/
 970 static int
 971 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 972 {
 973         scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
 974         fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 975         int ret;
 976         unsigned int id, lun;
 977         unsigned long serial;
 978
 979         qla2x00_block_error_handler(cmd);
 980
 981         ret = FAILED;
 982
 983         id = cmd->device->id;
 984         lun = cmd->device->lun;
 985         serial = cmd->serial_number;
 986
 987         if (!fcport)
 988                 return ret;
 989
 990         qla_printk(KERN_INFO, ha,
 991             "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
 992
 993         if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
 994                 goto eh_host_reset_lock;
 995
 996         /*
 997          * Fixme-may be dpc thread is active and processing
 998          * loop_resync,so wait a while for it to
 999          * be completed and then issue big hammer.Otherwise
1000          * it may cause I/O failure as big hammer marks the
1001          * devices as lost kicking of the port_down_timer
1002          * while dpc is stuck for the mailbox to complete.
1003          */
1004         qla2x00_wait_for_loop_ready(ha);
1005         set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1006         if (qla2x00_abort_isp(ha)) {
1007                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1008                 /* failed. schedule dpc to try */
1009                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1010
1011                 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
1012                         goto eh_host_reset_lock;
1013         }
1014         clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
1015
1016         /* Waiting for our command in done_queue to be returned to OS.*/
1017         if (qla2x00_eh_wait_for_pending_commands(ha))
1018                 ret = SUCCESS;
1019
1020 eh_host_reset_lock:
1021         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
1022             (ret == FAILED) ? "failed" : "succeded");
1023
1024         return ret;
1025 }
1026
1027 /*
1028 * qla2x00_loop_reset
1029 *      Issue loop reset.
1030 *
1031 * Input:
1032 *      ha = adapter block pointer.
1033 *
1034 * Returns:
1035 *      0 = success
1036 */
1037 static int
1038 qla2x00_loop_reset(scsi_qla_host_t *ha)
1039 {
1040         int status = QLA_SUCCESS;
1041         struct fc_port *fcport;
1042
1043         if (ha->flags.enable_lip_reset) {
1044                 status = qla2x00_lip_reset(ha);
1045         }
1046
1047         if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
1048                 list_for_each_entry(fcport, &ha->fcports, list) {
1049                         if (fcport->port_type != FCT_TARGET)
1050                                 continue;
1051
1052                         status = qla2x00_device_reset(ha, fcport);
1053                         if (status != QLA_SUCCESS)
1054                                 break;
1055                 }
1056         }
1057
1058         if (status == QLA_SUCCESS &&
1059                 ((!ha->flags.enable_target_reset &&
1060                   !ha->flags.enable_lip_reset) ||
1061                 ha->flags.enable_lip_full_login)) {
1062
1063                 status = qla2x00_full_login_lip(ha);
1064         }
1065
1066         /* Issue marker command only when we are going to start the I/O */
1067         ha->marker_needed = 1;
1068
1069         if (status) {
1070                 /* Empty */
1071                 DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
1072                                 __func__,
1073                                 ha->host_no));
1074         } else {
1075                 /* Empty */
1076                 DEBUG3(printk("%s(%ld): exiting normally.\n",
1077                                 __func__,
1078                                 ha->host_no));
1079         }
1080
1081         return(status);
1082 }
1083
1084 /*
1085  * qla2x00_device_reset
1086  *      Issue bus device reset message to the target.
1087  *
1088  * Input:
1089  *      ha = adapter block pointer.
1090  *      t = SCSI ID.
1091  *      TARGET_QUEUE_LOCK must be released.
1092  *      ADAPTER_STATE_LOCK must be released.
1093  *
1094  * Context:
1095  *      Kernel context.
1096  */
1097 static int
1098 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1099 {
1100         /* Abort Target command will clear Reservation */
1101         return ha->isp_ops.abort_target(reset_fcport);
1102 }
1103
1104 static int
1105 qla2xxx_slave_alloc(struct scsi_device *sdev)
1106 {
1107         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1108
1109         if (!rport || fc_remote_port_chkready(rport))
1110                 return -ENXIO;
1111
1112         sdev->hostdata = *(fc_port_t **)rport->dd_data;
1113
1114         return 0;
1115 }
1116
1117 static int
1118 qla2xxx_slave_configure(struct scsi_device *sdev)
1119 {
1120         scsi_qla_host_t *ha = to_qla_host(sdev->host);
1121         struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1122
1123         if (sdev->tagged_supported)
1124                 scsi_activate_tcq(sdev, ha->max_q_depth);
1125         else
1126                 scsi_deactivate_tcq(sdev, ha->max_q_depth);
1127
1128         rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1129
1130         return 0;
1131 }
1132
1133 static void
1134 qla2xxx_slave_destroy(struct scsi_device *sdev)
1135 {
1136         sdev->hostdata = NULL;
1137 }
1138
1139 static int
1140 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1141 {
1142         scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1143         return sdev->queue_depth;
1144 }
1145
1146 static int
1147 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1148 {
1149         if (sdev->tagged_supported) {
1150                 scsi_set_tag_type(sdev, tag_type);
1151                 if (tag_type)
1152                         scsi_activate_tcq(sdev, sdev->queue_depth);
1153                 else
1154                         scsi_deactivate_tcq(sdev, sdev->queue_depth);
1155         } else
1156                 tag_type = 0;
1157
1158         return tag_type;
1159 }
1160
1161 /**
1162  * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1163  * @ha: HA context
1164  *
1165  * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1166  * supported addressing method.
1167  */
1168 static void
1169 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1170 {
1171         /* Assume a 32bit DMA mask. */
1172         ha->flags.enable_64bit_addressing = 0;
1173
1174         if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1175                 /* Any upper-dword bits set? */
1176                 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1177                     !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1178                         /* Ok, a 64bit DMA mask is applicable. */
1179                         ha->flags.enable_64bit_addressing = 1;
1180                         ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1181                         ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1182                         return;
1183                 }
1184         }
1185
1186         dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1187         pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1188 }
1189
1190 static inline void
1191 qla2x00_set_isp_flags(scsi_qla_host_t *ha)
1192 {
1193         ha->device_type = DT_EXTENDED_IDS;
1194         switch (ha->pdev->device) {
1195         case PCI_DEVICE_ID_QLOGIC_ISP2100:
1196                 ha->device_type |= DT_ISP2100;
1197                 ha->device_type &= ~DT_EXTENDED_IDS;
1198                 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1199                 break;
1200         case PCI_DEVICE_ID_QLOGIC_ISP2200:
1201                 ha->device_type |= DT_ISP2200;
1202                 ha->device_type &= ~DT_EXTENDED_IDS;
1203                 ha->fw_srisc_address = RISC_START_ADDRESS_2100;
1204                 break;
1205         case PCI_DEVICE_ID_QLOGIC_ISP2300:
1206                 ha->device_type |= DT_ISP2300;
1207                 ha->device_type |= DT_ZIO_SUPPORTED;
1208                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1209                 break;
1210         case PCI_DEVICE_ID_QLOGIC_ISP2312:
1211                 ha->device_type |= DT_ISP2312;
1212                 ha->device_type |= DT_ZIO_SUPPORTED;
1213                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1214                 break;
1215         case PCI_DEVICE_ID_QLOGIC_ISP2322:
1216                 ha->device_type |= DT_ISP2322;
1217                 ha->device_type |= DT_ZIO_SUPPORTED;
1218                 if (ha->pdev->subsystem_vendor == 0x1028 &&
1219                     ha->pdev->subsystem_device == 0x0170)
1220                         ha->device_type |= DT_OEM_001;
1221                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1222                 break;
1223         case PCI_DEVICE_ID_QLOGIC_ISP6312:
1224                 ha->device_type |= DT_ISP6312;
1225                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1226                 break;
1227         case PCI_DEVICE_ID_QLOGIC_ISP6322:
1228                 ha->device_type |= DT_ISP6322;
1229                 ha->fw_srisc_address = RISC_START_ADDRESS_2300;
1230                 break;
1231         case PCI_DEVICE_ID_QLOGIC_ISP2422:
1232                 ha->device_type |= DT_ISP2422;
1233                 ha->device_type |= DT_ZIO_SUPPORTED;
1234                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1235                 break;
1236         case PCI_DEVICE_ID_QLOGIC_ISP2432:
1237                 ha->device_type |= DT_ISP2432;
1238                 ha->device_type |= DT_ZIO_SUPPORTED;
1239                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1240                 break;
1241         case PCI_DEVICE_ID_QLOGIC_ISP5422:
1242                 ha->device_type |= DT_ISP5422;
1243                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1244                 break;
1245         case PCI_DEVICE_ID_QLOGIC_ISP5432:
1246                 ha->device_type |= DT_ISP5432;
1247                 ha->fw_srisc_address = RISC_START_ADDRESS_2400;
1248                 break;
1249         }
1250 }
1251
1252 static int
1253 qla2x00_iospace_config(scsi_qla_host_t *ha)
1254 {
1255         unsigned long   pio, pio_len, pio_flags;
1256         unsigned long   mmio, mmio_len, mmio_flags;
1257
1258         /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1259         pio = pci_resource_start(ha->pdev, 0);
1260         pio_len = pci_resource_len(ha->pdev, 0);
1261         pio_flags = pci_resource_flags(ha->pdev, 0);
1262         if (pio_flags & IORESOURCE_IO) {
1263                 if (pio_len < MIN_IOBASE_LEN) {
1264                         qla_printk(KERN_WARNING, ha,
1265                             "Invalid PCI I/O region size (%s)...\n",
1266                                 pci_name(ha->pdev));
1267                         pio = 0;
1268                 }
1269         } else {
1270                 qla_printk(KERN_WARNING, ha,
1271                     "region #0 not a PIO resource (%s)...\n",
1272                     pci_name(ha->pdev));
1273                 pio = 0;
1274         }
1275
1276         /* Use MMIO operations for all accesses. */
1277         mmio = pci_resource_start(ha->pdev, 1);
1278         mmio_len = pci_resource_len(ha->pdev, 1);
1279         mmio_flags = pci_resource_flags(ha->pdev, 1);
1280
1281         if (!(mmio_flags & IORESOURCE_MEM)) {
1282                 qla_printk(KERN_ERR, ha,
1283                     "region #0 not an MMIO resource (%s), aborting\n",
1284                     pci_name(ha->pdev));
1285                 goto iospace_error_exit;
1286         }
1287         if (mmio_len < MIN_IOBASE_LEN) {
1288                 qla_printk(KERN_ERR, ha,
1289                     "Invalid PCI mem region size (%s), aborting\n",
1290                         pci_name(ha->pdev));
1291                 goto iospace_error_exit;
1292         }
1293
1294         if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) {
1295                 qla_printk(KERN_WARNING, ha,
1296                     "Failed to reserve PIO/MMIO regions (%s)\n",
1297                     pci_name(ha->pdev));
1298
1299                 goto iospace_error_exit;
1300         }
1301
1302         ha->pio_address = pio;
1303         ha->pio_length = pio_len;
1304         ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1305         if (!ha->iobase) {
1306                 qla_printk(KERN_ERR, ha,
1307                     "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1308
1309                 goto iospace_error_exit;
1310         }
1311
1312         return (0);
1313
1314 iospace_error_exit:
1315         return (-ENOMEM);
1316 }
1317
1318 static void
1319 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1320 {
1321         unsigned long flags = 0;
1322         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1323
1324         spin_lock_irqsave(&ha->hardware_lock, flags);
1325         ha->interrupts_on = 1;
1326         /* enable risc and host interrupts */
1327         WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
1328         RD_REG_WORD(&reg->ictrl);
1329         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1330
1331 }
1332
1333 static void
1334 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1335 {
1336         unsigned long flags = 0;
1337         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1338
1339         spin_lock_irqsave(&ha->hardware_lock, flags);
1340         ha->interrupts_on = 0;
1341         /* disable risc and host interrupts */
1342         WRT_REG_WORD(&reg->ictrl, 0);
1343         RD_REG_WORD(&reg->ictrl);
1344         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1345 }
1346
1347 static void
1348 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1349 {
1350         unsigned long flags = 0;
1351         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1352
1353         spin_lock_irqsave(&ha->hardware_lock, flags);
1354         ha->interrupts_on = 1;
1355         WRT_REG_DWORD(&reg->ictrl, ICRX_EN_RISC_INT);
1356         RD_REG_DWORD(&reg->ictrl);
1357         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1358 }
1359
1360 static void
1361 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1362 {
1363         unsigned long flags = 0;
1364         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1365
1366         spin_lock_irqsave(&ha->hardware_lock, flags);
1367         ha->interrupts_on = 0;
1368         WRT_REG_DWORD(&reg->ictrl, 0);
1369         RD_REG_DWORD(&reg->ictrl);
1370         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1371 }
1372
1373 static void
1374 qla2xxx_scan_start(struct Scsi_Host *shost)
1375 {
1376         scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
1377
1378         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
1379         set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
1380         set_bit(RSCN_UPDATE, &ha->dpc_flags);
1381 }
1382
1383 static int
1384 qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
1385 {
1386         scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
1387
1388         if (!ha->host)
1389                 return 1;
1390         if (time > ha->loop_reset_delay * HZ)
1391                 return 1;
1392
1393         return atomic_read(&ha->loop_state) == LOOP_READY;
1394 }
1395
1396 /*
1397  * PCI driver interface
1398  */
1399 static int __devinit
1400 qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
1401 {
1402         int     ret = -ENODEV;
1403         device_reg_t __iomem *reg;
1404         struct Scsi_Host *host;
1405         scsi_qla_host_t *ha;
1406         unsigned long   flags = 0;
1407         char pci_info[20];
1408         char fw_str[30];
1409         struct scsi_host_template *sht;
1410
1411         if (pci_enable_device(pdev))
1412                 goto probe_out;
1413
1414         sht = &qla2x00_driver_template;
1415         if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1416             pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
1417                 sht = &qla24xx_driver_template;
1418         host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1419         if (host == NULL) {
1420                 printk(KERN_WARNING
1421                     "qla2xxx: Couldn't allocate host from scsi layer!\n");
1422                 goto probe_disable_device;
1423         }
1424
1425         /* Clear our data area */
1426         ha = (scsi_qla_host_t *)host->hostdata;
1427         memset(ha, 0, sizeof(scsi_qla_host_t));
1428
1429         ha->pdev = pdev;
1430         ha->host = host;
1431         ha->host_no = host->host_no;
1432         sprintf(ha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, ha->host_no);
1433
1434         /* Set ISP-type information. */
1435         qla2x00_set_isp_flags(ha);
1436
1437         /* Configure PCI I/O space */
1438         ret = qla2x00_iospace_config(ha);
1439         if (ret)
1440                 goto probe_failed;
1441
1442         qla_printk(KERN_INFO, ha,
1443             "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1444             ha->iobase);
1445
1446         spin_lock_init(&ha->hardware_lock);
1447
1448         ha->prev_topology = 0;
1449         ha->init_cb_size = sizeof(init_cb_t);
1450         ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1451         ha->link_data_rate = PORT_SPEED_UNKNOWN;
1452         ha->optrom_size = OPTROM_SIZE_2300;
1453
1454         ha->max_q_depth = MAX_Q_DEPTH;
1455         if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU)
1456                 ha->max_q_depth = ql2xmaxqdepth;
1457
1458         /* Assign ISP specific operations. */
1459         ha->isp_ops.pci_config          = qla2100_pci_config;
1460         ha->isp_ops.reset_chip          = qla2x00_reset_chip;
1461         ha->isp_ops.chip_diag           = qla2x00_chip_diag;
1462         ha->isp_ops.config_rings        = qla2x00_config_rings;
1463         ha->isp_ops.reset_adapter       = qla2x00_reset_adapter;
1464         ha->isp_ops.nvram_config        = qla2x00_nvram_config;
1465         ha->isp_ops.update_fw_options   = qla2x00_update_fw_options;
1466         ha->isp_ops.load_risc           = qla2x00_load_risc;
1467         ha->isp_ops.pci_info_str        = qla2x00_pci_info_str;
1468         ha->isp_ops.fw_version_str      = qla2x00_fw_version_str;
1469         ha->isp_ops.intr_handler        = qla2100_intr_handler;
1470         ha->isp_ops.enable_intrs        = qla2x00_enable_intrs;
1471         ha->isp_ops.disable_intrs       = qla2x00_disable_intrs;
1472         ha->isp_ops.abort_command       = qla2x00_abort_command;
1473         ha->isp_ops.abort_target        = qla2x00_abort_target;
1474         ha->isp_ops.fabric_login        = qla2x00_login_fabric;
1475         ha->isp_ops.fabric_logout       = qla2x00_fabric_logout;
1476         ha->isp_ops.calc_req_entries    = qla2x00_calc_iocbs_32;
1477         ha->isp_ops.build_iocbs         = qla2x00_build_scsi_iocbs_32;
1478         ha->isp_ops.prep_ms_iocb        = qla2x00_prep_ms_iocb;
1479         ha->isp_ops.prep_ms_fdmi_iocb   = qla2x00_prep_ms_fdmi_iocb;
1480         ha->isp_ops.read_nvram          = qla2x00_read_nvram_data;
1481         ha->isp_ops.write_nvram         = qla2x00_write_nvram_data;
1482         ha->isp_ops.fw_dump             = qla2100_fw_dump;
1483         ha->isp_ops.read_optrom         = qla2x00_read_optrom_data;
1484         ha->isp_ops.write_optrom        = qla2x00_write_optrom_data;
1485         ha->isp_ops.get_flash_version   = qla2x00_get_flash_version;
1486         if (IS_QLA2100(ha)) {
1487                 host->max_id = MAX_TARGETS_2100;
1488                 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1489                 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1490                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1491                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1492                 host->sg_tablesize = 32;
1493                 ha->gid_list_info_size = 4;
1494         } else if (IS_QLA2200(ha)) {
1495                 host->max_id = MAX_TARGETS_2200;
1496                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1497                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1498                 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1499                 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1500                 ha->gid_list_info_size = 4;
1501         } else if (IS_QLA23XX(ha)) {
1502                 host->max_id = MAX_TARGETS_2200;
1503                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1504                 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1505                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1506                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1507                 ha->isp_ops.pci_config = qla2300_pci_config;
1508                 ha->isp_ops.intr_handler = qla2300_intr_handler;
1509                 ha->isp_ops.fw_dump = qla2300_fw_dump;
1510                 ha->isp_ops.beacon_on = qla2x00_beacon_on;
1511                 ha->isp_ops.beacon_off = qla2x00_beacon_off;
1512                 ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
1513                 ha->gid_list_info_size = 6;
1514                 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1515                         ha->optrom_size = OPTROM_SIZE_2322;
1516         } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1517                 host->max_id = MAX_TARGETS_2200;
1518                 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1519                 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1520                 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1521                 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1522                 ha->init_cb_size = sizeof(struct init_cb_24xx);
1523                 ha->mgmt_svr_loop_id = 10;
1524                 ha->isp_ops.pci_config = qla24xx_pci_config;
1525                 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1526                 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1527                 ha->isp_ops.config_rings = qla24xx_config_rings;
1528                 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1529                 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1530                 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1531                 ha->isp_ops.load_risc = qla24xx_load_risc;
1532                 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1533                 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1534                 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1535                 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1536                 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1537                 ha->isp_ops.abort_command = qla24xx_abort_command;
1538                 ha->isp_ops.abort_target = qla24xx_abort_target;
1539                 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1540                 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1541                 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1542                 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1543                 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1544                 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1545                 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1546                 ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
1547                 ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
1548                 ha->isp_ops.beacon_on = qla24xx_beacon_on;
1549                 ha->isp_ops.beacon_off = qla24xx_beacon_off;
1550                 ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
1551                 ha->isp_ops.get_flash_version = qla24xx_get_flash_version;
1552                 ha->gid_list_info_size = 8;
1553                 ha->optrom_size = OPTROM_SIZE_24XX;
1554         }
1555         host->can_queue = ha->request_q_length + 128;
1556
1557         /* load the F/W, read paramaters, and init the H/W */
1558         ha->instance = num_hosts;
1559
1560         init_MUTEX(&ha->mbx_cmd_sem);
1561         init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1562
1563         INIT_LIST_HEAD(&ha->list);
1564         INIT_LIST_HEAD(&ha->fcports);
1565
1566         /*
1567          * These locks are used to prevent more than one CPU
1568          * from modifying the queue at the same time. The
1569          * higher level "host_lock" will reduce most
1570          * contention for these locks.
1571          */
1572         spin_lock_init(&ha->mbx_reg_lock);
1573
1574         qla2x00_config_dma_addressing(ha);
1575         if (qla2x00_mem_alloc(ha)) {
1576                 qla_printk(KERN_WARNING, ha,
1577                     "[ERROR] Failed to allocate memory for adapter\n");
1578
1579                 ret = -ENOMEM;
1580                 goto probe_failed;
1581         }
1582
1583         if (qla2x00_initialize_adapter(ha) &&
1584             !(ha->device_flags & DFLG_NO_CABLE)) {
1585
1586                 qla_printk(KERN_WARNING, ha,
1587                     "Failed to initialize adapter\n");
1588
1589                 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1590                     "Adapter flags %x.\n",
1591                     ha->host_no, ha->device_flags));
1592
1593                 ret = -ENODEV;
1594                 goto probe_failed;
1595         }
1596
1597         /*
1598          * Startup the kernel thread for this host adapter
1599          */
1600         ha->dpc_thread = kthread_create(qla2x00_do_dpc, ha,
1601                         "%s_dpc", ha->host_str);
1602         if (IS_ERR(ha->dpc_thread)) {
1603                 qla_printk(KERN_WARNING, ha,
1604                     "Unable to start DPC thread!\n");
1605                 ret = PTR_ERR(ha->dpc_thread);
1606                 goto probe_failed;
1607         }
1608
1609         host->this_id = 255;
1610         host->cmd_per_lun = 3;
1611         host->unique_id = ha->instance;
1612         host->max_cmd_len = MAX_CMDSZ;
1613         host->max_channel = MAX_BUSES - 1;
1614         host->max_lun = MAX_LUNS;
1615         host->transportt = qla2xxx_transport_template;
1616
1617         ret = qla2x00_request_irqs(ha);
1618         if (ret)
1619                 goto probe_failed;
1620
1621         /* Initialized the timer */
1622         qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1623
1624         DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1625             ha->host_no, ha));
1626
1627         ha->isp_ops.disable_intrs(ha);
1628
1629         spin_lock_irqsave(&ha->hardware_lock, flags);
1630         reg = ha->iobase;
1631         if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
1632                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_HOST_INT);
1633                 WRT_REG_DWORD(&reg->isp24.hccr, HCCRX_CLR_RISC_INT);
1634         } else {
1635                 WRT_REG_WORD(&reg->isp.semaphore, 0);
1636                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_RISC_INT);
1637                 WRT_REG_WORD(&reg->isp.hccr, HCCR_CLR_HOST_INT);
1638
1639                 /* Enable proper parity */
1640                 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1641                         if (IS_QLA2300(ha))
1642                                 /* SRAM parity */
1643                                 WRT_REG_WORD(&reg->isp.hccr,
1644                                     (HCCR_ENABLE_PARITY + 0x1));
1645                         else
1646                                 /* SRAM, Instruction RAM and GP RAM parity */
1647                                 WRT_REG_WORD(&reg->isp.hccr,
1648                                     (HCCR_ENABLE_PARITY + 0x7));
1649                 }
1650         }
1651         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1652
1653         ha->isp_ops.enable_intrs(ha);
1654
1655         pci_set_drvdata(pdev, ha);
1656
1657         ha->flags.init_done = 1;
1658         ha->flags.online = 1;
1659
1660         num_hosts++;
1661
1662         ret = scsi_add_host(host, &pdev->dev);
1663         if (ret)
1664                 goto probe_failed;
1665
1666         scsi_scan_host(host);
1667
1668         qla2x00_alloc_sysfs_attr(ha);
1669
1670         qla2x00_init_host_attr(ha);
1671
1672         qla_printk(KERN_INFO, ha, "\n"
1673             " QLogic Fibre Channel HBA Driver: %s\n"
1674             "  QLogic %s - %s\n"
1675             "  ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1676             qla2x00_version_str, ha->model_number,
1677             ha->model_desc ? ha->model_desc: "", pdev->device,
1678             ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1679             ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1680             ha->isp_ops.fw_version_str(ha, fw_str));
1681
1682         return 0;
1683
1684 probe_failed:
1685         qla2x00_free_device(ha);
1686
1687         scsi_host_put(host);
1688
1689 probe_disable_device:
1690         pci_disable_device(pdev);
1691
1692 probe_out:
1693         return ret;
1694 }
1695
1696 static void __devexit
1697 qla2x00_remove_one(struct pci_dev *pdev)
1698 {
1699         scsi_qla_host_t *ha;
1700
1701         ha = pci_get_drvdata(pdev);
1702
1703         qla2x00_free_sysfs_attr(ha);
1704
1705         fc_remove_host(ha->host);
1706
1707         scsi_remove_host(ha->host);
1708
1709         qla2x00_free_device(ha);
1710
1711         scsi_host_put(ha->host);
1712
1713         pci_set_drvdata(pdev, NULL);
1714 }
1715
1716 static void
1717 qla2x00_free_device(scsi_qla_host_t *ha)
1718 {
1719         /* Disable timer */
1720         if (ha->timer_active)
1721                 qla2x00_stop_timer(ha);
1722
1723         /* Kill the kernel thread for this host */
1724         if (ha->dpc_thread) {
1725                 struct task_struct *t = ha->dpc_thread;
1726
1727                 /*
1728                  * qla2xxx_wake_dpc checks for ->dpc_thread
1729                  * so we need to zero it out.
1730                  */
1731                 ha->dpc_thread = NULL;
1732                 kthread_stop(t);
1733         }
1734
1735         if (ha->eft)
1736                 qla2x00_trace_control(ha, TC_DISABLE, 0, 0);
1737
1738         ha->flags.online = 0;
1739
1740         /* Stop currently executing firmware. */
1741         qla2x00_try_to_stop_firmware(ha);
1742
1743         /* turn-off interrupts on the card */
1744         if (ha->interrupts_on)
1745                 ha->isp_ops.disable_intrs(ha);
1746
1747         qla2x00_mem_free(ha);
1748
1749         qla2x00_free_irqs(ha);
1750
1751         /* release io space registers  */
1752         if (ha->iobase)
1753                 iounmap(ha->iobase);
1754         pci_release_regions(ha->pdev);
1755
1756         pci_disable_device(ha->pdev);
1757 }
1758
1759 static inline void
1760 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1761     int defer)
1762 {
1763         unsigned long flags;
1764         struct fc_rport *rport;
1765
1766         if (!fcport->rport)
1767                 return;
1768
1769         rport = fcport->rport;
1770         if (defer) {
1771                 spin_lock_irqsave(&fcport->rport_lock, flags);
1772                 fcport->drport = rport;
1773                 fcport->rport = NULL;
1774                 *(fc_port_t **)rport->dd_data = NULL;
1775                 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1776                 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1777         } else {
1778                 spin_lock_irqsave(&fcport->rport_lock, flags);
1779                 fcport->rport = NULL;
1780                 *(fc_port_t **)rport->dd_data = NULL;
1781                 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1782                 fc_remote_port_delete(rport);
1783         }
1784 }
1785
1786 /*
1787  * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1788  *
1789  * Input: ha = adapter block pointer.  fcport = port structure pointer.
1790  *
1791  * Return: None.
1792  *
1793  * Context:
1794  */
1795 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1796     int do_login, int defer)
1797 {
1798         if (atomic_read(&fcport->state) == FCS_ONLINE)
1799                 qla2x00_schedule_rport_del(ha, fcport, defer);
1800
1801         /*
1802          * We may need to retry the login, so don't change the state of the
1803          * port but do the retries.
1804          */
1805         if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1806                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1807
1808         if (!do_login)
1809                 return;
1810
1811         if (fcport->login_retry == 0) {
1812                 fcport->login_retry = ha->login_retry_count;
1813                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1814
1815                 DEBUG(printk("scsi(%ld): Port login retry: "
1816                     "%02x%02x%02x%02x%02x%02x%02x%02x, "
1817                     "id = 0x%04x retry cnt=%d\n",
1818                     ha->host_no,
1819                     fcport->port_name[0],
1820                     fcport->port_name[1],
1821                     fcport->port_name[2],
1822                     fcport->port_name[3],
1823                     fcport->port_name[4],
1824                     fcport->port_name[5],
1825                     fcport->port_name[6],
1826                     fcport->port_name[7],
1827                     fcport->loop_id,
1828                     fcport->login_retry));
1829         }
1830 }
1831
1832 /*
1833  * qla2x00_mark_all_devices_lost
1834  *      Updates fcport state when device goes offline.
1835  *
1836  * Input:
1837  *      ha = adapter block pointer.
1838  *      fcport = port structure pointer.
1839  *
1840  * Return:
1841  *      None.
1842  *
1843  * Context:
1844  */
1845 void
1846 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1847 {
1848         fc_port_t *fcport;
1849
1850         list_for_each_entry(fcport, &ha->fcports, list) {
1851                 if (fcport->port_type != FCT_TARGET)
1852                         continue;
1853
1854                 /*
1855                  * No point in marking the device as lost, if the device is
1856                  * already DEAD.
1857                  */
1858                 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1859                         continue;
1860                 if (atomic_read(&fcport->state) == FCS_ONLINE)
1861                         qla2x00_schedule_rport_del(ha, fcport, defer);
1862                 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1863         }
1864
1865         if (defer)
1866                 qla2xxx_wake_dpc(ha);
1867 }
1868
1869 /*
1870 * qla2x00_mem_alloc
1871 *      Allocates adapter memory.
1872 *
1873 * Returns:
1874 *      0  = success.
1875 *      1  = failure.
1876 */
1877 static uint8_t
1878 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1879 {
1880         char    name[16];
1881         uint8_t   status = 1;
1882         int     retry= 10;
1883
1884         do {
1885                 /*
1886                  * This will loop only once if everything goes well, else some
1887                  * number of retries will be performed to get around a kernel
1888                  * bug where available mem is not allocated until after a
1889                  * little delay and a retry.
1890                  */
1891                 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1892                     (ha->request_q_length + 1) * sizeof(request_t),
1893                     &ha->request_dma, GFP_KERNEL);
1894                 if (ha->request_ring == NULL) {
1895                         qla_printk(KERN_WARNING, ha,
1896                             "Memory Allocation failed - request_ring\n");
1897
1898                         qla2x00_mem_free(ha);
1899                         msleep(100);
1900
1901                         continue;
1902                 }
1903
1904                 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1905                     (ha->response_q_length + 1) * sizeof(response_t),
1906                     &ha->response_dma, GFP_KERNEL);
1907                 if (ha->response_ring == NULL) {
1908                         qla_printk(KERN_WARNING, ha,
1909                             "Memory Allocation failed - response_ring\n");
1910
1911                         qla2x00_mem_free(ha);
1912                         msleep(100);
1913
1914                         continue;
1915                 }
1916
1917                 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1918                     &ha->gid_list_dma, GFP_KERNEL);
1919                 if (ha->gid_list == NULL) {
1920                         qla_printk(KERN_WARNING, ha,
1921                             "Memory Allocation failed - gid_list\n");
1922
1923                         qla2x00_mem_free(ha);
1924                         msleep(100);
1925
1926                         continue;
1927                 }
1928
1929                 snprintf(name, sizeof(name), "%s_%ld", QLA2XXX_DRIVER_NAME,
1930                     ha->host_no);
1931                 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1932                     DMA_POOL_SIZE, 8, 0);
1933                 if (ha->s_dma_pool == NULL) {
1934                         qla_printk(KERN_WARNING, ha,
1935                             "Memory Allocation failed - s_dma_pool\n");
1936
1937                         qla2x00_mem_free(ha);
1938                         msleep(100);
1939
1940                         continue;
1941                 }
1942
1943                 /* get consistent memory allocated for init control block */
1944                 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1945                     &ha->init_cb_dma);
1946                 if (ha->init_cb == NULL) {
1947                         qla_printk(KERN_WARNING, ha,
1948                             "Memory Allocation failed - init_cb\n");
1949
1950                         qla2x00_mem_free(ha);
1951                         msleep(100);
1952
1953                         continue;
1954                 }
1955                 memset(ha->init_cb, 0, ha->init_cb_size);
1956
1957                 if (qla2x00_allocate_sp_pool(ha)) {
1958                         qla_printk(KERN_WARNING, ha,
1959                             "Memory Allocation failed - "
1960                             "qla2x00_allocate_sp_pool()\n");
1961
1962                         qla2x00_mem_free(ha);
1963                         msleep(100);
1964
1965                         continue;
1966                 }
1967
1968                 /* Allocate memory for SNS commands */
1969                 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1970                         /* Get consistent memory allocated for SNS commands */
1971                         ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1972                             sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1973                             GFP_KERNEL);
1974                         if (ha->sns_cmd == NULL) {
1975                                 /* error */
1976                                 qla_printk(KERN_WARNING, ha,
1977                                     "Memory Allocation failed - sns_cmd\n");
1978
1979                                 qla2x00_mem_free(ha);
1980                                 msleep(100);
1981
1982                                 continue;
1983                         }
1984                         memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1985                 } else {
1986                         /* Get consistent memory allocated for MS IOCB */
1987                         ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1988                             &ha->ms_iocb_dma);
1989                         if (ha->ms_iocb == NULL) {
1990                                 /* error */
1991                                 qla_printk(KERN_WARNING, ha,
1992                                     "Memory Allocation failed - ms_iocb\n");
1993
1994                                 qla2x00_mem_free(ha);
1995                                 msleep(100);
1996
1997                                 continue;
1998                         }
1999                         memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
2000
2001                         /*
2002                          * Get consistent memory allocated for CT SNS
2003                          * commands
2004                          */
2005                         ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
2006                             sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
2007                             GFP_KERNEL);
2008                         if (ha->ct_sns == NULL) {
2009                                 /* error */
2010                                 qla_printk(KERN_WARNING, ha,
2011                                     "Memory Allocation failed - ct_sns\n");
2012
2013                                 qla2x00_mem_free(ha);
2014                                 msleep(100);
2015
2016                                 continue;
2017                         }
2018                         memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
2019
2020                         if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2021                                 /*
2022                                  * Get consistent memory allocated for SFP
2023                                  * block.
2024                                  */
2025                                 ha->sfp_data = dma_pool_alloc(ha->s_dma_pool,
2026                                     GFP_KERNEL, &ha->sfp_data_dma);
2027                                 if (ha->sfp_data == NULL) {
2028                                         qla_printk(KERN_WARNING, ha,
2029                                             "Memory Allocation failed - "
2030                                             "sfp_data\n");
2031
2032                                         qla2x00_mem_free(ha);
2033                                         msleep(100);
2034
2035                                         continue;
2036                                 }
2037                                 memset(ha->sfp_data, 0, SFP_BLOCK_SIZE);
2038                         }
2039                 }
2040
2041                 /* Done all allocations without any error. */
2042                 status = 0;
2043
2044         } while (retry-- && status != 0);
2045
2046         if (status) {
2047                 printk(KERN_WARNING
2048                         "%s(): **** FAILED ****\n", __func__);
2049         }
2050
2051         return(status);
2052 }
2053
2054 /*
2055 * qla2x00_mem_free
2056 *      Frees all adapter allocated memory.
2057 *
2058 * Input:
2059 *      ha = adapter block pointer.
2060 */
2061 static void
2062 qla2x00_mem_free(scsi_qla_host_t *ha)
2063 {
2064         struct list_head        *fcpl, *fcptemp;
2065         fc_port_t       *fcport;
2066
2067         if (ha == NULL) {
2068                 /* error */
2069                 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
2070                 return;
2071         }
2072
2073         /* free sp pool */
2074         qla2x00_free_sp_pool(ha);
2075
2076         if (ha->fw_dump) {
2077                 if (ha->eft)
2078                         dma_free_coherent(&ha->pdev->dev,
2079                             ntohl(ha->fw_dump->eft_size), ha->eft, ha->eft_dma);
2080                 vfree(ha->fw_dump);
2081         }
2082
2083         if (ha->sns_cmd)
2084                 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2085                     ha->sns_cmd, ha->sns_cmd_dma);
2086
2087         if (ha->ct_sns)
2088                 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2089                     ha->ct_sns, ha->ct_sns_dma);
2090
2091         if (ha->sfp_data)
2092                 dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma);
2093
2094         if (ha->ms_iocb)
2095                 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2096
2097         if (ha->init_cb)
2098                 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
2099
2100         if (ha->s_dma_pool)
2101                 dma_pool_destroy(ha->s_dma_pool);
2102
2103         if (ha->gid_list)
2104                 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2105                     ha->gid_list_dma);
2106
2107         if (ha->response_ring)
2108                 dma_free_coherent(&ha->pdev->dev,
2109                     (ha->response_q_length + 1) * sizeof(response_t),
2110                     ha->response_ring, ha->response_dma);
2111
2112         if (ha->request_ring)
2113                 dma_free_coherent(&ha->pdev->dev,
2114                     (ha->request_q_length + 1) * sizeof(request_t),
2115                     ha->request_ring, ha->request_dma);
2116
2117         ha->eft = NULL;
2118         ha->eft_dma = 0;
2119         ha->sns_cmd = NULL;
2120         ha->sns_cmd_dma = 0;
2121         ha->ct_sns = NULL;
2122         ha->ct_sns_dma = 0;
2123         ha->ms_iocb = NULL;
2124         ha->ms_iocb_dma = 0;
2125         ha->init_cb = NULL;
2126         ha->init_cb_dma = 0;
2127
2128         ha->s_dma_pool = NULL;
2129
2130         ha->gid_list = NULL;
2131         ha->gid_list_dma = 0;
2132
2133         ha->response_ring = NULL;
2134         ha->response_dma = 0;
2135         ha->request_ring = NULL;
2136         ha->request_dma = 0;
2137
2138         list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2139                 fcport = list_entry(fcpl, fc_port_t, list);
2140
2141                 /* fc ports */
2142                 list_del_init(&fcport->list);
2143                 kfree(fcport);
2144         }
2145         INIT_LIST_HEAD(&ha->fcports);
2146
2147         ha->fw_dump = NULL;
2148         ha->fw_dumped = 0;
2149         ha->fw_dump_reading = 0;
2150
2151         vfree(ha->optrom_buffer);
2152 }
2153
2154 /*
2155  * qla2x00_allocate_sp_pool
2156  *       This routine is called during initialization to allocate
2157  *       memory for local srb_t.
2158  *
2159  * Input:
2160  *       ha   = adapter block pointer.
2161  *
2162  * Context:
2163  *      Kernel context.
2164  */
2165 static int
2166 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2167 {
2168         int      rval;
2169
2170         rval = QLA_SUCCESS;
2171         ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
2172         if (ha->srb_mempool == NULL) {
2173                 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2174                 rval = QLA_FUNCTION_FAILED;
2175         }
2176         return (rval);
2177 }
2178
2179 /*
2180  *  This routine frees all adapter allocated memory.
2181  *
2182  */
2183 static void
2184 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2185 {
2186         if (ha->srb_mempool) {
2187                 mempool_destroy(ha->srb_mempool);
2188                 ha->srb_mempool = NULL;
2189         }
2190 }
2191
2192 /**************************************************************************
2193 * qla2x00_do_dpc
2194 *   This kernel thread is a task that is schedule by the interrupt handler
2195 *   to perform the background processing for interrupts.
2196 *
2197 * Notes:
2198 * This task always run in the context of a kernel thread.  It
2199 * is kick-off by the driver's detect code and starts up
2200 * up one per adapter. It immediately goes to sleep and waits for
2201 * some fibre event.  When either the interrupt handler or
2202 * the timer routine detects a event it will one of the task
2203 * bits then wake us up.
2204 **************************************************************************/
2205 static int
2206 qla2x00_do_dpc(void *data)
2207 {
2208         scsi_qla_host_t *ha;
2209         fc_port_t       *fcport;
2210         uint8_t         status;
2211         uint16_t        next_loopid;
2212
2213         ha = (scsi_qla_host_t *)data;
2214
2215         set_user_nice(current, -20);
2216
2217         while (!kthread_should_stop()) {
2218                 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2219
2220                 set_current_state(TASK_INTERRUPTIBLE);
2221                 schedule();
2222                 __set_current_state(TASK_RUNNING);
2223
2224                 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2225
2226                 /* Initialization not yet finished. Don't do anything yet. */
2227                 if (!ha->flags.init_done)
2228                         continue;
2229
2230                 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2231
2232                 ha->dpc_active = 1;
2233
2234                 if (ha->flags.mbox_busy) {
2235                         ha->dpc_active = 0;
2236                         continue;
2237                 }
2238
2239                 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2240
2241                         DEBUG(printk("scsi(%ld): dpc: sched "
2242                             "qla2x00_abort_isp ha = %p\n",
2243                             ha->host_no, ha));
2244                         if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2245                             &ha->dpc_flags))) {
2246
2247                                 if (qla2x00_abort_isp(ha)) {
2248                                         /* failed. retry later */
2249                                         set_bit(ISP_ABORT_NEEDED,
2250                                             &ha->dpc_flags);
2251                                 }
2252                                 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2253                         }
2254                         DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2255                             ha->host_no));
2256                 }
2257
2258                 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2259                         qla2x00_update_fcports(ha);
2260
2261                 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2262                         DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2263                             ha->host_no));
2264                         qla2x00_loop_reset(ha);
2265                 }
2266
2267                 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2268                     (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2269
2270                         DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2271                             ha->host_no));
2272
2273                         qla2x00_rst_aen(ha);
2274                         clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2275                 }
2276
2277                 /* Retry each device up to login retry count */
2278                 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2279                     !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2280                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2281
2282                         DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2283                             ha->host_no));
2284
2285                         next_loopid = 0;
2286                         list_for_each_entry(fcport, &ha->fcports, list) {
2287                                 /*
2288                                  * If the port is not ONLINE then try to login
2289                                  * to it if we haven't run out of retries.
2290                                  */
2291                                 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2292                                     fcport->login_retry) {
2293
2294                                         fcport->login_retry--;
2295                                         if (fcport->flags & FCF_FABRIC_DEVICE) {
2296                                                 if (fcport->flags &
2297                                                     FCF_TAPE_PRESENT)
2298                                                         ha->isp_ops.fabric_logout(
2299                                                             ha, fcport->loop_id,
2300                                                             fcport->d_id.b.domain,
2301                                                             fcport->d_id.b.area,
2302                                                             fcport->d_id.b.al_pa);
2303                                                 status = qla2x00_fabric_login(
2304                                                     ha, fcport, &next_loopid);
2305                                         } else
2306                                                 status =
2307                                                     qla2x00_local_device_login(
2308                                                         ha, fcport);
2309
2310                                         if (status == QLA_SUCCESS) {
2311                                                 fcport->old_loop_id = fcport->loop_id;
2312
2313                                                 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2314                                                     ha->host_no, fcport->loop_id));
2315
2316                                                 qla2x00_update_fcport(ha,
2317                                                     fcport);
2318                                         } else if (status == 1) {
2319                                                 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2320                                                 /* retry the login again */
2321                                                 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2322                                                     ha->host_no,
2323                                                     fcport->login_retry, fcport->loop_id));
2324                                         } else {
2325                                                 fcport->login_retry = 0;
2326                                         }
2327                                 }
2328                                 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2329                                         break;
2330                         }
2331                         DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2332                             ha->host_no));
2333                 }
2334
2335                 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2336                     atomic_read(&ha->loop_state) != LOOP_DOWN) {
2337
2338                         clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2339                         DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2340                             ha->host_no));
2341
2342                         set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2343
2344                         DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2345                             ha->host_no));
2346                 }
2347
2348                 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2349
2350                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2351                             ha->host_no));
2352
2353                         if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2354                             &ha->dpc_flags))) {
2355
2356                                 qla2x00_loop_resync(ha);
2357
2358                                 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2359                         }
2360
2361                         DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2362                             ha->host_no));
2363                 }
2364
2365                 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2366
2367                         DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2368                             ha->host_no));
2369
2370                         qla2x00_rescan_fcports(ha);
2371
2372                         DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2373                             "end.\n",
2374                             ha->host_no));
2375                 }
2376
2377                 if (!ha->interrupts_on)
2378                         ha->isp_ops.enable_intrs(ha);
2379
2380                 if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
2381                         ha->isp_ops.beacon_blink(ha);
2382
2383                 ha->dpc_active = 0;
2384         } /* End of while(1) */
2385
2386         DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2387
2388         /*
2389          * Make sure that nobody tries to wake us up again.
2390          */
2391         ha->dpc_active = 0;
2392
2393         return 0;
2394 }
2395
2396 void
2397 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
2398 {
2399         if (ha->dpc_thread)
2400                 wake_up_process(ha->dpc_thread);
2401 }
2402
2403 /*
2404 *  qla2x00_rst_aen
2405 *      Processes asynchronous reset.
2406 *
2407 * Input:
2408 *      ha  = adapter block pointer.
2409 */
2410 static void
2411 qla2x00_rst_aen(scsi_qla_host_t *ha)
2412 {
2413         if (ha->flags.online && !ha->flags.reset_active &&
2414             !atomic_read(&ha->loop_down_timer) &&
2415             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2416                 do {
2417                         clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2418
2419                         /*
2420                          * Issue marker command only when we are going to start
2421                          * the I/O.
2422                          */
2423                         ha->marker_needed = 1;
2424                 } while (!atomic_read(&ha->loop_down_timer) &&
2425                     (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2426         }
2427 }
2428
2429 static void
2430 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2431 {
2432         struct scsi_cmnd *cmd = sp->cmd;
2433
2434         if (sp->flags & SRB_DMA_VALID) {
2435                 if (cmd->use_sg) {
2436                         dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2437                             cmd->use_sg, cmd->sc_data_direction);
2438                 } else if (cmd->request_bufflen) {
2439                         dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2440                             cmd->request_bufflen, cmd->sc_data_direction);
2441                 }
2442                 sp->flags &= ~SRB_DMA_VALID;
2443         }
2444         CMD_SP(cmd) = NULL;
2445 }
2446
2447 void
2448 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2449 {
2450         struct scsi_cmnd *cmd = sp->cmd;
2451
2452         qla2x00_sp_free_dma(ha, sp);
2453
2454         mempool_free(sp, ha->srb_mempool);
2455
2456         cmd->scsi_done(cmd);
2457 }
2458
2459 /**************************************************************************
2460 *   qla2x00_timer
2461 *
2462 * Description:
2463 *   One second timer
2464 *
2465 * Context: Interrupt
2466 ***************************************************************************/
2467 static void
2468 qla2x00_timer(scsi_qla_host_t *ha)
2469 {
2470         unsigned long   cpu_flags = 0;
2471         fc_port_t       *fcport;
2472         int             start_dpc = 0;
2473         int             index;
2474         srb_t           *sp;
2475         int             t;
2476
2477         /*
2478          * Ports - Port down timer.
2479          *
2480          * Whenever, a port is in the LOST state we start decrementing its port
2481          * down timer every second until it reaches zero. Once  it reaches zero
2482          * the port it marked DEAD.
2483          */
2484         t = 0;
2485         list_for_each_entry(fcport, &ha->fcports, list) {
2486                 if (fcport->port_type != FCT_TARGET)
2487                         continue;
2488
2489                 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2490
2491                         if (atomic_read(&fcport->port_down_timer) == 0)
2492                                 continue;
2493
2494                         if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2495                                 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2496
2497                         DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2498                             "%d remaining\n",
2499                             ha->host_no,
2500                             t, atomic_read(&fcport->port_down_timer)));
2501                 }
2502                 t++;
2503         } /* End of for fcport  */
2504
2505
2506         /* Loop down handler. */
2507         if (atomic_read(&ha->loop_down_timer) > 0 &&
2508             !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2509
2510                 if (atomic_read(&ha->loop_down_timer) ==
2511                     ha->loop_down_abort_time) {
2512
2513                         DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2514                             "queues before time expire\n",
2515                             ha->host_no));
2516
2517                         if (!IS_QLA2100(ha) && ha->link_down_timeout)
2518                                 atomic_set(&ha->loop_state, LOOP_DEAD);
2519
2520                         /* Schedule an ISP abort to return any tape commands. */
2521                         spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2522                         for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2523                             index++) {
2524                                 fc_port_t *sfcp;
2525
2526                                 sp = ha->outstanding_cmds[index];
2527                                 if (!sp)
2528                                         continue;
2529                                 sfcp = sp->fcport;
2530                                 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2531                                         continue;
2532
2533                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2534                                 break;
2535                         }
2536                         spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2537
2538                         set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2539                         start_dpc++;
2540                 }
2541
2542                 /* if the loop has been down for 4 minutes, reinit adapter */
2543                 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2544                         DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2545                             "restarting queues.\n",
2546                             ha->host_no));
2547
2548                         set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2549                         start_dpc++;
2550
2551                         if (!(ha->device_flags & DFLG_NO_CABLE)) {
2552                                 DEBUG(printk("scsi(%ld): Loop down - "
2553                                     "aborting ISP.\n",
2554                                     ha->host_no));
2555                                 qla_printk(KERN_WARNING, ha,
2556                                     "Loop down - aborting ISP.\n");
2557
2558                                 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2559                         }
2560                 }
2561                 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2562                     ha->host_no,
2563                     atomic_read(&ha->loop_down_timer)));
2564         }
2565
2566         /* Check if beacon LED needs to be blinked */
2567         if (ha->beacon_blink_led == 1) {
2568                 set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
2569                 start_dpc++;
2570         }
2571
2572         /* Schedule the DPC routine if needed */
2573         if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2574             test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2575             test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2576             test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2577             start_dpc ||
2578             test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2579             test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2580             test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
2581             test_bit(RELOGIN_NEEDED, &ha->dpc_flags)))
2582                 qla2xxx_wake_dpc(ha);
2583
2584         qla2x00_restart_timer(ha, WATCH_INTERVAL);
2585 }
2586
2587 /* XXX(hch): crude hack to emulate a down_timeout() */
2588 int
2589 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2590 {
2591         const unsigned int step = 100; /* msecs */
2592         unsigned int iterations = jiffies_to_msecs(timeout)/100;
2593
2594         do {
2595                 if (!down_trylock(sema))
2596                         return 0;
2597                 if (msleep_interruptible(step))
2598                         break;
2599         } while (--iterations >= 0);
2600
2601         return -ETIMEDOUT;
2602 }
2603
2604 /* Firmware interface routines. */
2605
2606 #define FW_BLOBS        5
2607 #define FW_ISP21XX      0
2608 #define FW_ISP22XX      1
2609 #define FW_ISP2300      2
2610 #define FW_ISP2322      3
2611 #define FW_ISP24XX      4
2612
2613 #define FW_FILE_ISP21XX "ql2100_fw.bin"
2614 #define FW_FILE_ISP22XX "ql2200_fw.bin"
2615 #define FW_FILE_ISP2300 "ql2300_fw.bin"
2616 #define FW_FILE_ISP2322 "ql2322_fw.bin"
2617 #define FW_FILE_ISP24XX "ql2400_fw.bin"
2618
2619 static DECLARE_MUTEX(qla_fw_lock);
2620
2621 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2622         { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
2623         { .name = FW_FILE_ISP22XX, .segs = { 0x1000, 0 }, },
2624         { .name = FW_FILE_ISP2300, .segs = { 0x800, 0 }, },
2625         { .name = FW_FILE_ISP2322, .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2626         { .name = FW_FILE_ISP24XX, },
2627 };
2628
2629 struct fw_blob *
2630 qla2x00_request_firmware(scsi_qla_host_t *ha)
2631 {
2632         struct fw_blob *blob;
2633
2634         blob = NULL;
2635         if (IS_QLA2100(ha)) {
2636                 blob = &qla_fw_blobs[FW_ISP21XX];
2637         } else if (IS_QLA2200(ha)) {
2638                 blob = &qla_fw_blobs[FW_ISP22XX];
2639         } else if (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA6312(ha)) {
2640                 blob = &qla_fw_blobs[FW_ISP2300];
2641         } else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2642                 blob = &qla_fw_blobs[FW_ISP2322];
2643         } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
2644                 blob = &qla_fw_blobs[FW_ISP24XX];
2645         }
2646
2647         down(&qla_fw_lock);
2648         if (blob->fw)
2649                 goto out;
2650
2651         if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2652                 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2653                     "(%s).\n", ha->host_no, blob->name));
2654                 blob->fw = NULL;
2655                 blob = NULL;
2656                 goto out;
2657         }
2658
2659 out:
2660         up(&qla_fw_lock);
2661         return blob;
2662 }
2663
2664 static void
2665 qla2x00_release_firmware(void)
2666 {
2667         int idx;
2668
2669         down(&qla_fw_lock);
2670         for (idx = 0; idx < FW_BLOBS; idx++)
2671                 if (qla_fw_blobs[idx].fw)
2672                         release_firmware(qla_fw_blobs[idx].fw);
2673         up(&qla_fw_lock);
2674 }
2675
2676 static struct pci_device_id qla2xxx_pci_tbl[] = {
2677         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) },
2678         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) },
2679         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300) },
2680         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312) },
2681         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322) },
2682         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312) },
2683         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
2684         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
2685         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
2686         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
2687         { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
2688         { 0 },
2689 };
2690 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2691
2692 static struct pci_driver qla2xxx_pci_driver = {
2693         .name           = QLA2XXX_DRIVER_NAME,
2694         .driver         = {
2695                 .owner          = THIS_MODULE,
2696         },
2697         .id_table       = qla2xxx_pci_tbl,
2698         .probe          = qla2x00_probe_one,
2699         .remove         = __devexit_p(qla2x00_remove_one),
2700 };
2701
2702 /**
2703  * qla2x00_module_init - Module initialization.
2704  **/
2705 static int __init
2706 qla2x00_module_init(void)
2707 {
2708         int ret = 0;
2709
2710         /* Allocate cache for SRBs. */
2711         srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2712             SLAB_HWCACHE_ALIGN, NULL, NULL);
2713         if (srb_cachep == NULL) {
2714                 printk(KERN_ERR
2715                     "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2716                 return -ENOMEM;
2717         }
2718
2719         /* Derive version string. */
2720         strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2721         if (ql2xextended_error_logging)
2722                 strcat(qla2x00_version_str, "-debug");
2723
2724         qla2xxx_transport_template =
2725             fc_attach_transport(&qla2xxx_transport_functions);
2726         if (!qla2xxx_transport_template)
2727                 return -ENODEV;
2728
2729         printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2730         ret = pci_register_driver(&qla2xxx_pci_driver);
2731         if (ret) {
2732                 kmem_cache_destroy(srb_cachep);
2733                 fc_release_transport(qla2xxx_transport_template);
2734         }
2735         return ret;
2736 }
2737
2738 /**
2739  * qla2x00_module_exit - Module cleanup.
2740  **/
2741 static void __exit
2742 qla2x00_module_exit(void)
2743 {
2744         pci_unregister_driver(&qla2xxx_pci_driver);
2745         qla2x00_release_firmware();
2746         kmem_cache_destroy(srb_cachep);
2747         fc_release_transport(qla2xxx_transport_template);
2748 }
2749
2750 module_init(qla2x00_module_init);
2751 module_exit(qla2x00_module_exit);
2752
2753 MODULE_AUTHOR("QLogic Corporation");
2754 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2755 MODULE_LICENSE("GPL");
2756 MODULE_VERSION(QLA2XXX_VERSION);
2757 MODULE_FIRMWARE(FW_FILE_ISP21XX);
2758 MODULE_FIRMWARE(FW_FILE_ISP22XX);
2759 MODULE_FIRMWARE(FW_FILE_ISP2300);
2760 MODULE_FIRMWARE(FW_FILE_ISP2322);
2761 MODULE_FIRMWARE(FW_FILE_ISP24XX);