tree-wide: fix assorted typos all over the place
[linux-2.6.git] / drivers / scsi / lpfc / lpfc_init.c
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
5  * EMULEX and SLI are trademarks of Emulex.                        *
6  * www.emulex.com                                                  *
7  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
8  *                                                                 *
9  * This program is free software; you can redistribute it and/or   *
10  * modify it under the terms of version 2 of the GNU General       *
11  * Public License as published by the Free Software Foundation.    *
12  * This program is distributed in the hope that it will be useful. *
13  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
14  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
15  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
16  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
18  * more details, a copy of which can be found in the file COPYING  *
19  * included with this package.                                     *
20  *******************************************************************/
21
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/idr.h>
26 #include <linux/interrupt.h>
27 #include <linux/kthread.h>
28 #include <linux/pci.h>
29 #include <linux/spinlock.h>
30 #include <linux/ctype.h>
31
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_device.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_transport_fc.h>
36
37 #include "lpfc_hw4.h"
38 #include "lpfc_hw.h"
39 #include "lpfc_sli.h"
40 #include "lpfc_sli4.h"
41 #include "lpfc_nl.h"
42 #include "lpfc_disc.h"
43 #include "lpfc_scsi.h"
44 #include "lpfc.h"
45 #include "lpfc_logmsg.h"
46 #include "lpfc_crtn.h"
47 #include "lpfc_vport.h"
48 #include "lpfc_version.h"
49
50 char *_dump_buf_data;
51 unsigned long _dump_buf_data_order;
52 char *_dump_buf_dif;
53 unsigned long _dump_buf_dif_order;
54 spinlock_t _dump_buf_lock;
55
56 static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
57 static int lpfc_post_rcv_buf(struct lpfc_hba *);
58 static int lpfc_sli4_queue_create(struct lpfc_hba *);
59 static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
60 static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
61 static int lpfc_setup_endian_order(struct lpfc_hba *);
62 static int lpfc_sli4_read_config(struct lpfc_hba *);
63 static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
64 static void lpfc_free_sgl_list(struct lpfc_hba *);
65 static int lpfc_init_sgl_list(struct lpfc_hba *);
66 static int lpfc_init_active_sgl_array(struct lpfc_hba *);
67 static void lpfc_free_active_sgl(struct lpfc_hba *);
68 static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
69 static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
70 static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
71 static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
72 static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
73
74 static struct scsi_transport_template *lpfc_transport_template = NULL;
75 static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
76 static DEFINE_IDR(lpfc_hba_index);
77
78 /**
79  * lpfc_config_port_prep - Perform lpfc initialization prior to config port
80  * @phba: pointer to lpfc hba data structure.
81  *
82  * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
83  * mailbox command. It retrieves the revision information from the HBA and
84  * collects the Vital Product Data (VPD) about the HBA for preparing the
85  * configuration of the HBA.
86  *
87  * Return codes:
88  *   0 - success.
89  *   -ERESTART - requests the SLI layer to reset the HBA and try again.
90  *   Any other value - indicates an error.
91  **/
92 int
93 lpfc_config_port_prep(struct lpfc_hba *phba)
94 {
95         lpfc_vpd_t *vp = &phba->vpd;
96         int i = 0, rc;
97         LPFC_MBOXQ_t *pmb;
98         MAILBOX_t *mb;
99         char *lpfc_vpd_data = NULL;
100         uint16_t offset = 0;
101         static char licensed[56] =
102                     "key unlock for use with gnu public licensed code only\0";
103         static int init_key = 1;
104
105         pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
106         if (!pmb) {
107                 phba->link_state = LPFC_HBA_ERROR;
108                 return -ENOMEM;
109         }
110
111         mb = &pmb->u.mb;
112         phba->link_state = LPFC_INIT_MBX_CMDS;
113
114         if (lpfc_is_LC_HBA(phba->pcidev->device)) {
115                 if (init_key) {
116                         uint32_t *ptext = (uint32_t *) licensed;
117
118                         for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
119                                 *ptext = cpu_to_be32(*ptext);
120                         init_key = 0;
121                 }
122
123                 lpfc_read_nv(phba, pmb);
124                 memset((char*)mb->un.varRDnvp.rsvd3, 0,
125                         sizeof (mb->un.varRDnvp.rsvd3));
126                 memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
127                          sizeof (licensed));
128
129                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
130
131                 if (rc != MBX_SUCCESS) {
132                         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
133                                         "0324 Config Port initialization "
134                                         "error, mbxCmd x%x READ_NVPARM, "
135                                         "mbxStatus x%x\n",
136                                         mb->mbxCommand, mb->mbxStatus);
137                         mempool_free(pmb, phba->mbox_mem_pool);
138                         return -ERESTART;
139                 }
140                 memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
141                        sizeof(phba->wwnn));
142                 memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
143                        sizeof(phba->wwpn));
144         }
145
146         phba->sli3_options = 0x0;
147
148         /* Setup and issue mailbox READ REV command */
149         lpfc_read_rev(phba, pmb);
150         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
151         if (rc != MBX_SUCCESS) {
152                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
153                                 "0439 Adapter failed to init, mbxCmd x%x "
154                                 "READ_REV, mbxStatus x%x\n",
155                                 mb->mbxCommand, mb->mbxStatus);
156                 mempool_free( pmb, phba->mbox_mem_pool);
157                 return -ERESTART;
158         }
159
160
161         /*
162          * The value of rr must be 1 since the driver set the cv field to 1.
163          * This setting requires the FW to set all revision fields.
164          */
165         if (mb->un.varRdRev.rr == 0) {
166                 vp->rev.rBit = 0;
167                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
168                                 "0440 Adapter failed to init, READ_REV has "
169                                 "missing revision information.\n");
170                 mempool_free(pmb, phba->mbox_mem_pool);
171                 return -ERESTART;
172         }
173
174         if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
175                 mempool_free(pmb, phba->mbox_mem_pool);
176                 return -EINVAL;
177         }
178
179         /* Save information as VPD data */
180         vp->rev.rBit = 1;
181         memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
182         vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
183         memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
184         vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
185         memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
186         vp->rev.biuRev = mb->un.varRdRev.biuRev;
187         vp->rev.smRev = mb->un.varRdRev.smRev;
188         vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
189         vp->rev.endecRev = mb->un.varRdRev.endecRev;
190         vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
191         vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
192         vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
193         vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
194         vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
195         vp->rev.opFwRev = mb->un.varRdRev.opFwRev;
196
197         /* If the sli feature level is less then 9, we must
198          * tear down all RPIs and VPIs on link down if NPIV
199          * is enabled.
200          */
201         if (vp->rev.feaLevelHigh < 9)
202                 phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;
203
204         if (lpfc_is_LC_HBA(phba->pcidev->device))
205                 memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
206                                                 sizeof (phba->RandomData));
207
208         /* Get adapter VPD information */
209         lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
210         if (!lpfc_vpd_data)
211                 goto out_free_mbox;
212
213         do {
214                 lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
215                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
216
217                 if (rc != MBX_SUCCESS) {
218                         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
219                                         "0441 VPD not present on adapter, "
220                                         "mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
221                                         mb->mbxCommand, mb->mbxStatus);
222                         mb->un.varDmp.word_cnt = 0;
223                 }
224                 /* dump mem may return a zero when finished or we got a
225                  * mailbox error, either way we are done.
226                  */
227                 if (mb->un.varDmp.word_cnt == 0)
228                         break;
229                 if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
230                         mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
231                 lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
232                                       lpfc_vpd_data + offset,
233                                       mb->un.varDmp.word_cnt);
234                 offset += mb->un.varDmp.word_cnt;
235         } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);
236         lpfc_parse_vpd(phba, lpfc_vpd_data, offset);
237
238         kfree(lpfc_vpd_data);
239 out_free_mbox:
240         mempool_free(pmb, phba->mbox_mem_pool);
241         return 0;
242 }
243
244 /**
245  * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
246  * @phba: pointer to lpfc hba data structure.
247  * @pmboxq: pointer to the driver internal queue element for mailbox command.
248  *
249  * This is the completion handler for driver's configuring asynchronous event
250  * mailbox command to the device. If the mailbox command returns successfully,
251  * it will set internal async event support flag to 1; otherwise, it will
252  * set internal async event support flag to 0.
253  **/
254 static void
255 lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
256 {
257         if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
258                 phba->temp_sensor_support = 1;
259         else
260                 phba->temp_sensor_support = 0;
261         mempool_free(pmboxq, phba->mbox_mem_pool);
262         return;
263 }
264
265 /**
266  * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
267  * @phba: pointer to lpfc hba data structure.
268  * @pmboxq: pointer to the driver internal queue element for mailbox command.
269  *
270  * This is the completion handler for dump mailbox command for getting
271  * wake up parameters. When this command complete, the response contain
272  * Option rom version of the HBA. This function translate the version number
273  * into a human readable string and store it in OptionROMVersion.
274  **/
275 static void
276 lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
277 {
278         struct prog_id *prg;
279         uint32_t prog_id_word;
280         char dist = ' ';
281         /* character array used for decoding dist type. */
282         char dist_char[] = "nabx";
283
284         if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
285                 mempool_free(pmboxq, phba->mbox_mem_pool);
286                 return;
287         }
288
289         prg = (struct prog_id *) &prog_id_word;
290
291         /* word 7 contain option rom version */
292         prog_id_word = pmboxq->u.mb.un.varWords[7];
293
294         /* Decode the Option rom version word to a readable string */
295         if (prg->dist < 4)
296                 dist = dist_char[prg->dist];
297
298         if ((prg->dist == 3) && (prg->num == 0))
299                 sprintf(phba->OptionROMVersion, "%d.%d%d",
300                         prg->ver, prg->rev, prg->lev);
301         else
302                 sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
303                         prg->ver, prg->rev, prg->lev,
304                         dist, prg->num);
305         mempool_free(pmboxq, phba->mbox_mem_pool);
306         return;
307 }
308
309 /**
310  * lpfc_config_port_post - Perform lpfc initialization after config port
311  * @phba: pointer to lpfc hba data structure.
312  *
313  * This routine will do LPFC initialization after the CONFIG_PORT mailbox
314  * command call. It performs all internal resource and state setups on the
315  * port: post IOCB buffers, enable appropriate host interrupt attentions,
316  * ELS ring timers, etc.
317  *
318  * Return codes
319  *   0 - success.
320  *   Any other value - error.
321  **/
322 int
323 lpfc_config_port_post(struct lpfc_hba *phba)
324 {
325         struct lpfc_vport *vport = phba->pport;
326         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
327         LPFC_MBOXQ_t *pmb;
328         MAILBOX_t *mb;
329         struct lpfc_dmabuf *mp;
330         struct lpfc_sli *psli = &phba->sli;
331         uint32_t status, timeout;
332         int i, j;
333         int rc;
334
335         spin_lock_irq(&phba->hbalock);
336         /*
337          * If the Config port completed correctly the HBA is not
338          * over heated any more.
339          */
340         if (phba->over_temp_state == HBA_OVER_TEMP)
341                 phba->over_temp_state = HBA_NORMAL_TEMP;
342         spin_unlock_irq(&phba->hbalock);
343
344         pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
345         if (!pmb) {
346                 phba->link_state = LPFC_HBA_ERROR;
347                 return -ENOMEM;
348         }
349         mb = &pmb->u.mb;
350
351         /* Get login parameters for NID.  */
352         lpfc_read_sparam(phba, pmb, 0);
353         pmb->vport = vport;
354         if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
355                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
356                                 "0448 Adapter failed init, mbxCmd x%x "
357                                 "READ_SPARM mbxStatus x%x\n",
358                                 mb->mbxCommand, mb->mbxStatus);
359                 phba->link_state = LPFC_HBA_ERROR;
360                 mp = (struct lpfc_dmabuf *) pmb->context1;
361                 mempool_free( pmb, phba->mbox_mem_pool);
362                 lpfc_mbuf_free(phba, mp->virt, mp->phys);
363                 kfree(mp);
364                 return -EIO;
365         }
366
367         mp = (struct lpfc_dmabuf *) pmb->context1;
368
369         memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
370         lpfc_mbuf_free(phba, mp->virt, mp->phys);
371         kfree(mp);
372         pmb->context1 = NULL;
373
374         if (phba->cfg_soft_wwnn)
375                 u64_to_wwn(phba->cfg_soft_wwnn,
376                            vport->fc_sparam.nodeName.u.wwn);
377         if (phba->cfg_soft_wwpn)
378                 u64_to_wwn(phba->cfg_soft_wwpn,
379                            vport->fc_sparam.portName.u.wwn);
380         memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
381                sizeof (struct lpfc_name));
382         memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
383                sizeof (struct lpfc_name));
384
385         /* Update the fc_host data structures with new wwn. */
386         fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
387         fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
388         fc_host_max_npiv_vports(shost) = phba->max_vpi;
389
390         /* If no serial number in VPD data, use low 6 bytes of WWNN */
391         /* This should be consolidated into parse_vpd ? - mr */
392         if (phba->SerialNumber[0] == 0) {
393                 uint8_t *outptr;
394
395                 outptr = &vport->fc_nodename.u.s.IEEE[0];
396                 for (i = 0; i < 12; i++) {
397                         status = *outptr++;
398                         j = ((status & 0xf0) >> 4);
399                         if (j <= 9)
400                                 phba->SerialNumber[i] =
401                                     (char)((uint8_t) 0x30 + (uint8_t) j);
402                         else
403                                 phba->SerialNumber[i] =
404                                     (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
405                         i++;
406                         j = (status & 0xf);
407                         if (j <= 9)
408                                 phba->SerialNumber[i] =
409                                     (char)((uint8_t) 0x30 + (uint8_t) j);
410                         else
411                                 phba->SerialNumber[i] =
412                                     (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
413                 }
414         }
415
416         lpfc_read_config(phba, pmb);
417         pmb->vport = vport;
418         if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
419                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
420                                 "0453 Adapter failed to init, mbxCmd x%x "
421                                 "READ_CONFIG, mbxStatus x%x\n",
422                                 mb->mbxCommand, mb->mbxStatus);
423                 phba->link_state = LPFC_HBA_ERROR;
424                 mempool_free( pmb, phba->mbox_mem_pool);
425                 return -EIO;
426         }
427
428         /* Check if the port is disabled */
429         lpfc_sli_read_link_ste(phba);
430
431         /* Reset the DFT_HBA_Q_DEPTH to the max xri  */
432         if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
433                 phba->cfg_hba_queue_depth =
434                         (mb->un.varRdConfig.max_xri + 1) -
435                                         lpfc_sli4_get_els_iocb_cnt(phba);
436
437         phba->lmt = mb->un.varRdConfig.lmt;
438
439         /* Get the default values for Model Name and Description */
440         lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
441
442         if ((phba->cfg_link_speed > LINK_SPEED_10G)
443             || ((phba->cfg_link_speed == LINK_SPEED_1G)
444                 && !(phba->lmt & LMT_1Gb))
445             || ((phba->cfg_link_speed == LINK_SPEED_2G)
446                 && !(phba->lmt & LMT_2Gb))
447             || ((phba->cfg_link_speed == LINK_SPEED_4G)
448                 && !(phba->lmt & LMT_4Gb))
449             || ((phba->cfg_link_speed == LINK_SPEED_8G)
450                 && !(phba->lmt & LMT_8Gb))
451             || ((phba->cfg_link_speed == LINK_SPEED_10G)
452                 && !(phba->lmt & LMT_10Gb))) {
453                 /* Reset link speed to auto */
454                 lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
455                         "1302 Invalid speed for this board: "
456                         "Reset link speed to auto: x%x\n",
457                         phba->cfg_link_speed);
458                         phba->cfg_link_speed = LINK_SPEED_AUTO;
459         }
460
461         phba->link_state = LPFC_LINK_DOWN;
462
463         /* Only process IOCBs on ELS ring till hba_state is READY */
464         if (psli->ring[psli->extra_ring].cmdringaddr)
465                 psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
466         if (psli->ring[psli->fcp_ring].cmdringaddr)
467                 psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
468         if (psli->ring[psli->next_ring].cmdringaddr)
469                 psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;
470
471         /* Post receive buffers for desired rings */
472         if (phba->sli_rev != 3)
473                 lpfc_post_rcv_buf(phba);
474
475         /*
476          * Configure HBA MSI-X attention conditions to messages if MSI-X mode
477          */
478         if (phba->intr_type == MSIX) {
479                 rc = lpfc_config_msi(phba, pmb);
480                 if (rc) {
481                         mempool_free(pmb, phba->mbox_mem_pool);
482                         return -EIO;
483                 }
484                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
485                 if (rc != MBX_SUCCESS) {
486                         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
487                                         "0352 Config MSI mailbox command "
488                                         "failed, mbxCmd x%x, mbxStatus x%x\n",
489                                         pmb->u.mb.mbxCommand,
490                                         pmb->u.mb.mbxStatus);
491                         mempool_free(pmb, phba->mbox_mem_pool);
492                         return -EIO;
493                 }
494         }
495
496         spin_lock_irq(&phba->hbalock);
497         /* Initialize ERATT handling flag */
498         phba->hba_flag &= ~HBA_ERATT_HANDLED;
499
500         /* Enable appropriate host interrupts */
501         status = readl(phba->HCregaddr);
502         status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
503         if (psli->num_rings > 0)
504                 status |= HC_R0INT_ENA;
505         if (psli->num_rings > 1)
506                 status |= HC_R1INT_ENA;
507         if (psli->num_rings > 2)
508                 status |= HC_R2INT_ENA;
509         if (psli->num_rings > 3)
510                 status |= HC_R3INT_ENA;
511
512         if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
513             (phba->cfg_poll & DISABLE_FCP_RING_INT))
514                 status &= ~(HC_R0INT_ENA);
515
516         writel(status, phba->HCregaddr);
517         readl(phba->HCregaddr); /* flush */
518         spin_unlock_irq(&phba->hbalock);
519
520         /* Set up ring-0 (ELS) timer */
521         timeout = phba->fc_ratov * 2;
522         mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout);
523         /* Set up heart beat (HB) timer */
524         mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
525         phba->hb_outstanding = 0;
526         phba->last_completion_time = jiffies;
527         /* Set up error attention (ERATT) polling timer */
528         mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
529
530         if (phba->hba_flag & LINK_DISABLED) {
531                 lpfc_printf_log(phba,
532                         KERN_ERR, LOG_INIT,
533                         "2598 Adapter Link is disabled.\n");
534                 lpfc_down_link(phba, pmb);
535                 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
536                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
537                 if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
538                         lpfc_printf_log(phba,
539                         KERN_ERR, LOG_INIT,
540                         "2599 Adapter failed to issue DOWN_LINK"
541                         " mbox command rc 0x%x\n", rc);
542
543                         mempool_free(pmb, phba->mbox_mem_pool);
544                         return -EIO;
545                 }
546         } else {
547                 lpfc_init_link(phba, pmb, phba->cfg_topology,
548                         phba->cfg_link_speed);
549                 pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
550                 lpfc_set_loopback_flag(phba);
551                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
552                 if (rc != MBX_SUCCESS) {
553                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
554                                 "0454 Adapter failed to init, mbxCmd x%x "
555                                 "INIT_LINK, mbxStatus x%x\n",
556                                 mb->mbxCommand, mb->mbxStatus);
557
558                         /* Clear all interrupt enable conditions */
559                         writel(0, phba->HCregaddr);
560                         readl(phba->HCregaddr); /* flush */
561                         /* Clear all pending interrupts */
562                         writel(0xffffffff, phba->HAregaddr);
563                         readl(phba->HAregaddr); /* flush */
564
565                         phba->link_state = LPFC_HBA_ERROR;
566                         if (rc != MBX_BUSY)
567                                 mempool_free(pmb, phba->mbox_mem_pool);
568                         return -EIO;
569                 }
570         }
571         /* MBOX buffer will be freed in mbox compl */
572         pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
573         lpfc_config_async(phba, pmb, LPFC_ELS_RING);
574         pmb->mbox_cmpl = lpfc_config_async_cmpl;
575         pmb->vport = phba->pport;
576         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
577
578         if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
579                 lpfc_printf_log(phba,
580                                 KERN_ERR,
581                                 LOG_INIT,
582                                 "0456 Adapter failed to issue "
583                                 "ASYNCEVT_ENABLE mbox status x%x\n",
584                                 rc);
585                 mempool_free(pmb, phba->mbox_mem_pool);
586         }
587
588         /* Get Option rom version */
589         pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
590         lpfc_dump_wakeup_param(phba, pmb);
591         pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
592         pmb->vport = phba->pport;
593         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
594
595         if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
596                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
597                                 "to get Option ROM version status x%x\n", rc);
598                 mempool_free(pmb, phba->mbox_mem_pool);
599         }
600
601         return 0;
602 }
603
604 /**
605  * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
606  * @phba: pointer to lpfc HBA data structure.
607  *
608  * This routine will do LPFC uninitialization before the HBA is reset when
609  * bringing down the SLI Layer.
610  *
611  * Return codes
612  *   0 - success.
613  *   Any other value - error.
614  **/
615 int
616 lpfc_hba_down_prep(struct lpfc_hba *phba)
617 {
618         struct lpfc_vport **vports;
619         int i;
620
621         if (phba->sli_rev <= LPFC_SLI_REV3) {
622                 /* Disable interrupts */
623                 writel(0, phba->HCregaddr);
624                 readl(phba->HCregaddr); /* flush */
625         }
626
627         if (phba->pport->load_flag & FC_UNLOADING)
628                 lpfc_cleanup_discovery_resources(phba->pport);
629         else {
630                 vports = lpfc_create_vport_work_array(phba);
631                 if (vports != NULL)
632                         for (i = 0; i <= phba->max_vports &&
633                                 vports[i] != NULL; i++)
634                                 lpfc_cleanup_discovery_resources(vports[i]);
635                 lpfc_destroy_vport_work_array(phba, vports);
636         }
637         return 0;
638 }
639
640 /**
641  * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
642  * @phba: pointer to lpfc HBA data structure.
643  *
644  * This routine will do uninitialization after the HBA is reset when bring
645  * down the SLI Layer.
646  *
647  * Return codes
648  *   0 - success.
649  *   Any other value - error.
650  **/
651 static int
652 lpfc_hba_down_post_s3(struct lpfc_hba *phba)
653 {
654         struct lpfc_sli *psli = &phba->sli;
655         struct lpfc_sli_ring *pring;
656         struct lpfc_dmabuf *mp, *next_mp;
657         LIST_HEAD(completions);
658         int i;
659
660         if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
661                 lpfc_sli_hbqbuf_free_all(phba);
662         else {
663                 /* Cleanup preposted buffers on the ELS ring */
664                 pring = &psli->ring[LPFC_ELS_RING];
665                 list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
666                         list_del(&mp->list);
667                         pring->postbufq_cnt--;
668                         lpfc_mbuf_free(phba, mp->virt, mp->phys);
669                         kfree(mp);
670                 }
671         }
672
673         spin_lock_irq(&phba->hbalock);
674         for (i = 0; i < psli->num_rings; i++) {
675                 pring = &psli->ring[i];
676
677                 /* At this point in time the HBA is either reset or DOA. Either
678                  * way, nothing should be on txcmplq as it will NEVER complete.
679                  */
680                 list_splice_init(&pring->txcmplq, &completions);
681                 pring->txcmplq_cnt = 0;
682                 spin_unlock_irq(&phba->hbalock);
683
684                 /* Cancel all the IOCBs from the completions list */
685                 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
686                                       IOERR_SLI_ABORTED);
687
688                 lpfc_sli_abort_iocb_ring(phba, pring);
689                 spin_lock_irq(&phba->hbalock);
690         }
691         spin_unlock_irq(&phba->hbalock);
692
693         return 0;
694 }
695 /**
696  * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
697  * @phba: pointer to lpfc HBA data structure.
698  *
699  * This routine will do uninitialization after the HBA is reset when bring
700  * down the SLI Layer.
701  *
702  * Return codes
703  *   0 - success.
704  *   Any other value - error.
705  **/
706 static int
707 lpfc_hba_down_post_s4(struct lpfc_hba *phba)
708 {
709         struct lpfc_scsi_buf *psb, *psb_next;
710         LIST_HEAD(aborts);
711         int ret;
712         unsigned long iflag = 0;
713         ret = lpfc_hba_down_post_s3(phba);
714         if (ret)
715                 return ret;
716         /* At this point in time the HBA is either reset or DOA. Either
717          * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
718          * on the lpfc_sgl_list so that it can either be freed if the
719          * driver is unloading or reposted if the driver is restarting
720          * the port.
721          */
722         spin_lock_irq(&phba->hbalock);  /* required for lpfc_sgl_list and */
723                                         /* scsl_buf_list */
724         /* abts_sgl_list_lock required because worker thread uses this
725          * list.
726          */
727         spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
728         list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
729                         &phba->sli4_hba.lpfc_sgl_list);
730         spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
731         /* abts_scsi_buf_list_lock required because worker thread uses this
732          * list.
733          */
734         spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
735         list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
736                         &aborts);
737         spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
738         spin_unlock_irq(&phba->hbalock);
739
740         list_for_each_entry_safe(psb, psb_next, &aborts, list) {
741                 psb->pCmd = NULL;
742                 psb->status = IOSTAT_SUCCESS;
743         }
744         spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
745         list_splice(&aborts, &phba->lpfc_scsi_buf_list);
746         spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
747         return 0;
748 }
749
750 /**
751  * lpfc_hba_down_post - Wrapper func for hba down post routine
752  * @phba: pointer to lpfc HBA data structure.
753  *
754  * This routine wraps the actual SLI3 or SLI4 routine for performing
755  * uninitialization after the HBA is reset when bring down the SLI Layer.
756  *
757  * Return codes
758  *   0 - success.
759  *   Any other value - error.
760  **/
761 int
762 lpfc_hba_down_post(struct lpfc_hba *phba)
763 {
764         return (*phba->lpfc_hba_down_post)(phba);
765 }
766
767 /**
768  * lpfc_hb_timeout - The HBA-timer timeout handler
769  * @ptr: unsigned long holds the pointer to lpfc hba data structure.
770  *
771  * This is the HBA-timer timeout handler registered to the lpfc driver. When
772  * this timer fires, a HBA timeout event shall be posted to the lpfc driver
773  * work-port-events bitmap and the worker thread is notified. This timeout
774  * event will be used by the worker thread to invoke the actual timeout
775  * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
776  * be performed in the timeout handler and the HBA timeout event bit shall
777  * be cleared by the worker thread after it has taken the event bitmap out.
778  **/
779 static void
780 lpfc_hb_timeout(unsigned long ptr)
781 {
782         struct lpfc_hba *phba;
783         uint32_t tmo_posted;
784         unsigned long iflag;
785
786         phba = (struct lpfc_hba *)ptr;
787
788         /* Check for heart beat timeout conditions */
789         spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
790         tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
791         if (!tmo_posted)
792                 phba->pport->work_port_events |= WORKER_HB_TMO;
793         spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
794
795         /* Tell the worker thread there is work to do */
796         if (!tmo_posted)
797                 lpfc_worker_wake_up(phba);
798         return;
799 }
800
801 /**
802  * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
803  * @phba: pointer to lpfc hba data structure.
804  * @pmboxq: pointer to the driver internal queue element for mailbox command.
805  *
806  * This is the callback function to the lpfc heart-beat mailbox command.
807  * If configured, the lpfc driver issues the heart-beat mailbox command to
808  * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
809  * heart-beat mailbox command is issued, the driver shall set up heart-beat
810  * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
811  * heart-beat outstanding state. Once the mailbox command comes back and
812  * no error conditions detected, the heart-beat mailbox command timer is
813  * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
814  * state is cleared for the next heart-beat. If the timer expired with the
815  * heart-beat outstanding state set, the driver will put the HBA offline.
816  **/
817 static void
818 lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
819 {
820         unsigned long drvr_flag;
821
822         spin_lock_irqsave(&phba->hbalock, drvr_flag);
823         phba->hb_outstanding = 0;
824         spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
825
826         /* Check and reset heart-beat timer is necessary */
827         mempool_free(pmboxq, phba->mbox_mem_pool);
828         if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) &&
829                 !(phba->link_state == LPFC_HBA_ERROR) &&
830                 !(phba->pport->load_flag & FC_UNLOADING))
831                 mod_timer(&phba->hb_tmofunc,
832                         jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
833         return;
834 }
835
836 /**
837  * lpfc_hb_timeout_handler - The HBA-timer timeout handler
838  * @phba: pointer to lpfc hba data structure.
839  *
840  * This is the actual HBA-timer timeout handler to be invoked by the worker
841  * thread whenever the HBA timer fired and HBA-timeout event posted. This
842  * handler performs any periodic operations needed for the device. If such
843  * periodic event has already been attended to either in the interrupt handler
844  * or by processing slow-ring or fast-ring events within the HBA-timer
845  * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
846  * the timer for the next timeout period. If lpfc heart-beat mailbox command
847  * is configured and there is no heart-beat mailbox command outstanding, a
848  * heart-beat mailbox is issued and timer set properly. Otherwise, if there
849  * has been a heart-beat mailbox command outstanding, the HBA shall be put
850  * to offline.
851  **/
852 void
853 lpfc_hb_timeout_handler(struct lpfc_hba *phba)
854 {
855         LPFC_MBOXQ_t *pmboxq;
856         struct lpfc_dmabuf *buf_ptr;
857         int retval;
858         struct lpfc_sli *psli = &phba->sli;
859         LIST_HEAD(completions);
860
861         if ((phba->link_state == LPFC_HBA_ERROR) ||
862                 (phba->pport->load_flag & FC_UNLOADING) ||
863                 (phba->pport->fc_flag & FC_OFFLINE_MODE))
864                 return;
865
866         spin_lock_irq(&phba->pport->work_port_lock);
867
868         if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ,
869                 jiffies)) {
870                 spin_unlock_irq(&phba->pport->work_port_lock);
871                 if (!phba->hb_outstanding)
872                         mod_timer(&phba->hb_tmofunc,
873                                 jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
874                 else
875                         mod_timer(&phba->hb_tmofunc,
876                                 jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
877                 return;
878         }
879         spin_unlock_irq(&phba->pport->work_port_lock);
880
881         if (phba->elsbuf_cnt &&
882                 (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
883                 spin_lock_irq(&phba->hbalock);
884                 list_splice_init(&phba->elsbuf, &completions);
885                 phba->elsbuf_cnt = 0;
886                 phba->elsbuf_prev_cnt = 0;
887                 spin_unlock_irq(&phba->hbalock);
888
889                 while (!list_empty(&completions)) {
890                         list_remove_head(&completions, buf_ptr,
891                                 struct lpfc_dmabuf, list);
892                         lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
893                         kfree(buf_ptr);
894                 }
895         }
896         phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
897
898         /* If there is no heart beat outstanding, issue a heartbeat command */
899         if (phba->cfg_enable_hba_heartbeat) {
900                 if (!phba->hb_outstanding) {
901                         pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
902                         if (!pmboxq) {
903                                 mod_timer(&phba->hb_tmofunc,
904                                           jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
905                                 return;
906                         }
907
908                         lpfc_heart_beat(phba, pmboxq);
909                         pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
910                         pmboxq->vport = phba->pport;
911                         retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
912
913                         if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
914                                 mempool_free(pmboxq, phba->mbox_mem_pool);
915                                 mod_timer(&phba->hb_tmofunc,
916                                           jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
917                                 return;
918                         }
919                         mod_timer(&phba->hb_tmofunc,
920                                   jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
921                         phba->hb_outstanding = 1;
922                         return;
923                 } else {
924                         /*
925                         * If heart beat timeout called with hb_outstanding set
926                         * we need to take the HBA offline.
927                         */
928                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
929                                         "0459 Adapter heartbeat failure, "
930                                         "taking this port offline.\n");
931
932                         spin_lock_irq(&phba->hbalock);
933                         psli->sli_flag &= ~LPFC_SLI_ACTIVE;
934                         spin_unlock_irq(&phba->hbalock);
935
936                         lpfc_offline_prep(phba);
937                         lpfc_offline(phba);
938                         lpfc_unblock_mgmt_io(phba);
939                         phba->link_state = LPFC_HBA_ERROR;
940                         lpfc_hba_down_post(phba);
941                 }
942         }
943 }
944
945 /**
946  * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
947  * @phba: pointer to lpfc hba data structure.
948  *
949  * This routine is called to bring the HBA offline when HBA hardware error
950  * other than Port Error 6 has been detected.
951  **/
952 static void
953 lpfc_offline_eratt(struct lpfc_hba *phba)
954 {
955         struct lpfc_sli   *psli = &phba->sli;
956
957         spin_lock_irq(&phba->hbalock);
958         psli->sli_flag &= ~LPFC_SLI_ACTIVE;
959         spin_unlock_irq(&phba->hbalock);
960         lpfc_offline_prep(phba);
961
962         lpfc_offline(phba);
963         lpfc_reset_barrier(phba);
964         spin_lock_irq(&phba->hbalock);
965         lpfc_sli_brdreset(phba);
966         spin_unlock_irq(&phba->hbalock);
967         lpfc_hba_down_post(phba);
968         lpfc_sli_brdready(phba, HS_MBRDY);
969         lpfc_unblock_mgmt_io(phba);
970         phba->link_state = LPFC_HBA_ERROR;
971         return;
972 }
973
974 /**
975  * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
976  * @phba: pointer to lpfc hba data structure.
977  *
978  * This routine is called to bring a SLI4 HBA offline when HBA hardware error
979  * other than Port Error 6 has been detected.
980  **/
981 static void
982 lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
983 {
984         lpfc_offline_prep(phba);
985         lpfc_offline(phba);
986         lpfc_sli4_brdreset(phba);
987         lpfc_hba_down_post(phba);
988         lpfc_sli4_post_status_check(phba);
989         lpfc_unblock_mgmt_io(phba);
990         phba->link_state = LPFC_HBA_ERROR;
991 }
992
993 /**
994  * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
995  * @phba: pointer to lpfc hba data structure.
996  *
997  * This routine is invoked to handle the deferred HBA hardware error
998  * conditions. This type of error is indicated by HBA by setting ER1
999  * and another ER bit in the host status register. The driver will
1000  * wait until the ER1 bit clears before handling the error condition.
1001  **/
1002 static void
1003 lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
1004 {
1005         uint32_t old_host_status = phba->work_hs;
1006         struct lpfc_sli_ring  *pring;
1007         struct lpfc_sli *psli = &phba->sli;
1008
1009         /* If the pci channel is offline, ignore possible errors,
1010          * since we cannot communicate with the pci card anyway.
1011          */
1012         if (pci_channel_offline(phba->pcidev)) {
1013                 spin_lock_irq(&phba->hbalock);
1014                 phba->hba_flag &= ~DEFER_ERATT;
1015                 spin_unlock_irq(&phba->hbalock);
1016                 return;
1017         }
1018
1019         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1020                 "0479 Deferred Adapter Hardware Error "
1021                 "Data: x%x x%x x%x\n",
1022                 phba->work_hs,
1023                 phba->work_status[0], phba->work_status[1]);
1024
1025         spin_lock_irq(&phba->hbalock);
1026         psli->sli_flag &= ~LPFC_SLI_ACTIVE;
1027         spin_unlock_irq(&phba->hbalock);
1028
1029
1030         /*
1031          * Firmware stops when it triggred erratt. That could cause the I/Os
1032          * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
1033          * SCSI layer retry it after re-establishing link.
1034          */
1035         pring = &psli->ring[psli->fcp_ring];
1036         lpfc_sli_abort_iocb_ring(phba, pring);
1037
1038         /*
1039          * There was a firmware error. Take the hba offline and then
1040          * attempt to restart it.
1041          */
1042         lpfc_offline_prep(phba);
1043         lpfc_offline(phba);
1044
1045         /* Wait for the ER1 bit to clear.*/
1046         while (phba->work_hs & HS_FFER1) {
1047                 msleep(100);
1048                 phba->work_hs = readl(phba->HSregaddr);
1049                 /* If driver is unloading let the worker thread continue */
1050                 if (phba->pport->load_flag & FC_UNLOADING) {
1051                         phba->work_hs = 0;
1052                         break;
1053                 }
1054         }
1055
1056         /*
1057          * This is to ptrotect against a race condition in which
1058          * first write to the host attention register clear the
1059          * host status register.
1060          */
1061         if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
1062                 phba->work_hs = old_host_status & ~HS_FFER1;
1063
1064         spin_lock_irq(&phba->hbalock);
1065         phba->hba_flag &= ~DEFER_ERATT;
1066         spin_unlock_irq(&phba->hbalock);
1067         phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
1068         phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
1069 }
1070
1071 static void
1072 lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
1073 {
1074         struct lpfc_board_event_header board_event;
1075         struct Scsi_Host *shost;
1076
1077         board_event.event_type = FC_REG_BOARD_EVENT;
1078         board_event.subcategory = LPFC_EVENT_PORTINTERR;
1079         shost = lpfc_shost_from_vport(phba->pport);
1080         fc_host_post_vendor_event(shost, fc_get_event_number(),
1081                                   sizeof(board_event),
1082                                   (char *) &board_event,
1083                                   LPFC_NL_VENDOR_ID);
1084 }
1085
1086 /**
1087  * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
1088  * @phba: pointer to lpfc hba data structure.
1089  *
1090  * This routine is invoked to handle the following HBA hardware error
1091  * conditions:
1092  * 1 - HBA error attention interrupt
1093  * 2 - DMA ring index out of range
1094  * 3 - Mailbox command came back as unknown
1095  **/
1096 static void
1097 lpfc_handle_eratt_s3(struct lpfc_hba *phba)
1098 {
1099         struct lpfc_vport *vport = phba->pport;
1100         struct lpfc_sli   *psli = &phba->sli;
1101         struct lpfc_sli_ring  *pring;
1102         uint32_t event_data;
1103         unsigned long temperature;
1104         struct temp_event temp_event_data;
1105         struct Scsi_Host  *shost;
1106
1107         /* If the pci channel is offline, ignore possible errors,
1108          * since we cannot communicate with the pci card anyway.
1109          */
1110         if (pci_channel_offline(phba->pcidev)) {
1111                 spin_lock_irq(&phba->hbalock);
1112                 phba->hba_flag &= ~DEFER_ERATT;
1113                 spin_unlock_irq(&phba->hbalock);
1114                 return;
1115         }
1116
1117         /* If resets are disabled then leave the HBA alone and return */
1118         if (!phba->cfg_enable_hba_reset)
1119                 return;
1120
1121         /* Send an internal error event to mgmt application */
1122         lpfc_board_errevt_to_mgmt(phba);
1123
1124         if (phba->hba_flag & DEFER_ERATT)
1125                 lpfc_handle_deferred_eratt(phba);
1126
1127         if (phba->work_hs & HS_FFER6) {
1128                 /* Re-establishing Link */
1129                 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
1130                                 "1301 Re-establishing Link "
1131                                 "Data: x%x x%x x%x\n",
1132                                 phba->work_hs,
1133                                 phba->work_status[0], phba->work_status[1]);
1134
1135                 spin_lock_irq(&phba->hbalock);
1136                 psli->sli_flag &= ~LPFC_SLI_ACTIVE;
1137                 spin_unlock_irq(&phba->hbalock);
1138
1139                 /*
1140                 * Firmware stops when it triggled erratt with HS_FFER6.
1141                 * That could cause the I/Os dropped by the firmware.
1142                 * Error iocb (I/O) on txcmplq and let the SCSI layer
1143                 * retry it after re-establishing link.
1144                 */
1145                 pring = &psli->ring[psli->fcp_ring];
1146                 lpfc_sli_abort_iocb_ring(phba, pring);
1147
1148                 /*
1149                  * There was a firmware error.  Take the hba offline and then
1150                  * attempt to restart it.
1151                  */
1152                 lpfc_offline_prep(phba);
1153                 lpfc_offline(phba);
1154                 lpfc_sli_brdrestart(phba);
1155                 if (lpfc_online(phba) == 0) {   /* Initialize the HBA */
1156                         lpfc_unblock_mgmt_io(phba);
1157                         return;
1158                 }
1159                 lpfc_unblock_mgmt_io(phba);
1160         } else if (phba->work_hs & HS_CRIT_TEMP) {
1161                 temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
1162                 temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
1163                 temp_event_data.event_code = LPFC_CRIT_TEMP;
1164                 temp_event_data.data = (uint32_t)temperature;
1165
1166                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1167                                 "0406 Adapter maximum temperature exceeded "
1168                                 "(%ld), taking this port offline "
1169                                 "Data: x%x x%x x%x\n",
1170                                 temperature, phba->work_hs,
1171                                 phba->work_status[0], phba->work_status[1]);
1172
1173                 shost = lpfc_shost_from_vport(phba->pport);
1174                 fc_host_post_vendor_event(shost, fc_get_event_number(),
1175                                           sizeof(temp_event_data),
1176                                           (char *) &temp_event_data,
1177                                           SCSI_NL_VID_TYPE_PCI
1178                                           | PCI_VENDOR_ID_EMULEX);
1179
1180                 spin_lock_irq(&phba->hbalock);
1181                 phba->over_temp_state = HBA_OVER_TEMP;
1182                 spin_unlock_irq(&phba->hbalock);
1183                 lpfc_offline_eratt(phba);
1184
1185         } else {
1186                 /* The if clause above forces this code path when the status
1187                  * failure is a value other than FFER6. Do not call the offline
1188                  * twice. This is the adapter hardware error path.
1189                  */
1190                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1191                                 "0457 Adapter Hardware Error "
1192                                 "Data: x%x x%x x%x\n",
1193                                 phba->work_hs,
1194                                 phba->work_status[0], phba->work_status[1]);
1195
1196                 event_data = FC_REG_DUMP_EVENT;
1197                 shost = lpfc_shost_from_vport(vport);
1198                 fc_host_post_vendor_event(shost, fc_get_event_number(),
1199                                 sizeof(event_data), (char *) &event_data,
1200                                 SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
1201
1202                 lpfc_offline_eratt(phba);
1203         }
1204         return;
1205 }
1206
1207 /**
1208  * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
1209  * @phba: pointer to lpfc hba data structure.
1210  *
1211  * This routine is invoked to handle the SLI4 HBA hardware error attention
1212  * conditions.
1213  **/
1214 static void
1215 lpfc_handle_eratt_s4(struct lpfc_hba *phba)
1216 {
1217         struct lpfc_vport *vport = phba->pport;
1218         uint32_t event_data;
1219         struct Scsi_Host *shost;
1220
1221         /* If the pci channel is offline, ignore possible errors, since
1222          * we cannot communicate with the pci card anyway.
1223          */
1224         if (pci_channel_offline(phba->pcidev))
1225                 return;
1226         /* If resets are disabled then leave the HBA alone and return */
1227         if (!phba->cfg_enable_hba_reset)
1228                 return;
1229
1230         /* Send an internal error event to mgmt application */
1231         lpfc_board_errevt_to_mgmt(phba);
1232
1233         /* For now, the actual action for SLI4 device handling is not
1234          * specified yet, just treated it as adaptor hardware failure
1235          */
1236         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1237                         "0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
1238                         phba->work_status[0], phba->work_status[1]);
1239
1240         event_data = FC_REG_DUMP_EVENT;
1241         shost = lpfc_shost_from_vport(vport);
1242         fc_host_post_vendor_event(shost, fc_get_event_number(),
1243                                   sizeof(event_data), (char *) &event_data,
1244                                   SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
1245
1246         lpfc_sli4_offline_eratt(phba);
1247 }
1248
1249 /**
1250  * lpfc_handle_eratt - Wrapper func for handling hba error attention
1251  * @phba: pointer to lpfc HBA data structure.
1252  *
1253  * This routine wraps the actual SLI3 or SLI4 hba error attention handling
1254  * routine from the API jump table function pointer from the lpfc_hba struct.
1255  *
1256  * Return codes
1257  *   0 - success.
1258  *   Any other value - error.
1259  **/
1260 void
1261 lpfc_handle_eratt(struct lpfc_hba *phba)
1262 {
1263         (*phba->lpfc_handle_eratt)(phba);
1264 }
1265
1266 /**
1267  * lpfc_handle_latt - The HBA link event handler
1268  * @phba: pointer to lpfc hba data structure.
1269  *
1270  * This routine is invoked from the worker thread to handle a HBA host
1271  * attention link event.
1272  **/
1273 void
1274 lpfc_handle_latt(struct lpfc_hba *phba)
1275 {
1276         struct lpfc_vport *vport = phba->pport;
1277         struct lpfc_sli   *psli = &phba->sli;
1278         LPFC_MBOXQ_t *pmb;
1279         volatile uint32_t control;
1280         struct lpfc_dmabuf *mp;
1281         int rc = 0;
1282
1283         pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1284         if (!pmb) {
1285                 rc = 1;
1286                 goto lpfc_handle_latt_err_exit;
1287         }
1288
1289         mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
1290         if (!mp) {
1291                 rc = 2;
1292                 goto lpfc_handle_latt_free_pmb;
1293         }
1294
1295         mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
1296         if (!mp->virt) {
1297                 rc = 3;
1298                 goto lpfc_handle_latt_free_mp;
1299         }
1300
1301         /* Cleanup any outstanding ELS commands */
1302         lpfc_els_flush_all_cmd(phba);
1303
1304         psli->slistat.link_event++;
1305         lpfc_read_la(phba, pmb, mp);
1306         pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
1307         pmb->vport = vport;
1308         /* Block ELS IOCBs until we have processed this mbox command */
1309         phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
1310         rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
1311         if (rc == MBX_NOT_FINISHED) {
1312                 rc = 4;
1313                 goto lpfc_handle_latt_free_mbuf;
1314         }
1315
1316         /* Clear Link Attention in HA REG */
1317         spin_lock_irq(&phba->hbalock);
1318         writel(HA_LATT, phba->HAregaddr);
1319         readl(phba->HAregaddr); /* flush */
1320         spin_unlock_irq(&phba->hbalock);
1321
1322         return;
1323
1324 lpfc_handle_latt_free_mbuf:
1325         phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
1326         lpfc_mbuf_free(phba, mp->virt, mp->phys);
1327 lpfc_handle_latt_free_mp:
1328         kfree(mp);
1329 lpfc_handle_latt_free_pmb:
1330         mempool_free(pmb, phba->mbox_mem_pool);
1331 lpfc_handle_latt_err_exit:
1332         /* Enable Link attention interrupts */
1333         spin_lock_irq(&phba->hbalock);
1334         psli->sli_flag |= LPFC_PROCESS_LA;
1335         control = readl(phba->HCregaddr);
1336         control |= HC_LAINT_ENA;
1337         writel(control, phba->HCregaddr);
1338         readl(phba->HCregaddr); /* flush */
1339
1340         /* Clear Link Attention in HA REG */
1341         writel(HA_LATT, phba->HAregaddr);
1342         readl(phba->HAregaddr); /* flush */
1343         spin_unlock_irq(&phba->hbalock);
1344         lpfc_linkdown(phba);
1345         phba->link_state = LPFC_HBA_ERROR;
1346
1347         lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
1348                      "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);
1349
1350         return;
1351 }
1352
1353 /**
1354  * lpfc_parse_vpd - Parse VPD (Vital Product Data)
1355  * @phba: pointer to lpfc hba data structure.
1356  * @vpd: pointer to the vital product data.
1357  * @len: length of the vital product data in bytes.
1358  *
1359  * This routine parses the Vital Product Data (VPD). The VPD is treated as
1360  * an array of characters. In this routine, the ModelName, ProgramType, and
1361  * ModelDesc, etc. fields of the phba data structure will be populated.
1362  *
1363  * Return codes
1364  *   0 - pointer to the VPD passed in is NULL
1365  *   1 - success
1366  **/
1367 int
1368 lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
1369 {
1370         uint8_t lenlo, lenhi;
1371         int Length;
1372         int i, j;
1373         int finished = 0;
1374         int index = 0;
1375
1376         if (!vpd)
1377                 return 0;
1378
1379         /* Vital Product */
1380         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
1381                         "0455 Vital Product Data: x%x x%x x%x x%x\n",
1382                         (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
1383                         (uint32_t) vpd[3]);
1384         while (!finished && (index < (len - 4))) {
1385                 switch (vpd[index]) {
1386                 case 0x82:
1387                 case 0x91:
1388                         index += 1;
1389                         lenlo = vpd[index];
1390                         index += 1;
1391                         lenhi = vpd[index];
1392                         index += 1;
1393                         i = ((((unsigned short)lenhi) << 8) + lenlo);
1394                         index += i;
1395                         break;
1396                 case 0x90:
1397                         index += 1;
1398                         lenlo = vpd[index];
1399                         index += 1;
1400                         lenhi = vpd[index];
1401                         index += 1;
1402                         Length = ((((unsigned short)lenhi) << 8) + lenlo);
1403                         if (Length > len - index)
1404                                 Length = len - index;
1405                         while (Length > 0) {
1406                         /* Look for Serial Number */
1407                         if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
1408                                 index += 2;
1409                                 i = vpd[index];
1410                                 index += 1;
1411                                 j = 0;
1412                                 Length -= (3+i);
1413                                 while(i--) {
1414                                         phba->SerialNumber[j++] = vpd[index++];
1415                                         if (j == 31)
1416                                                 break;
1417                                 }
1418                                 phba->SerialNumber[j] = 0;
1419                                 continue;
1420                         }
1421                         else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
1422                                 phba->vpd_flag |= VPD_MODEL_DESC;
1423                                 index += 2;
1424                                 i = vpd[index];
1425                                 index += 1;
1426                                 j = 0;
1427                                 Length -= (3+i);
1428                                 while(i--) {
1429                                         phba->ModelDesc[j++] = vpd[index++];
1430                                         if (j == 255)
1431                                                 break;
1432                                 }
1433                                 phba->ModelDesc[j] = 0;
1434                                 continue;
1435                         }
1436                         else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
1437                                 phba->vpd_flag |= VPD_MODEL_NAME;
1438                                 index += 2;
1439                                 i = vpd[index];
1440                                 index += 1;
1441                                 j = 0;
1442                                 Length -= (3+i);
1443                                 while(i--) {
1444                                         phba->ModelName[j++] = vpd[index++];
1445                                         if (j == 79)
1446                                                 break;
1447                                 }
1448                                 phba->ModelName[j] = 0;
1449                                 continue;
1450                         }
1451                         else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
1452                                 phba->vpd_flag |= VPD_PROGRAM_TYPE;
1453                                 index += 2;
1454                                 i = vpd[index];
1455                                 index += 1;
1456                                 j = 0;
1457                                 Length -= (3+i);
1458                                 while(i--) {
1459                                         phba->ProgramType[j++] = vpd[index++];
1460                                         if (j == 255)
1461                                                 break;
1462                                 }
1463                                 phba->ProgramType[j] = 0;
1464                                 continue;
1465                         }
1466                         else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
1467                                 phba->vpd_flag |= VPD_PORT;
1468                                 index += 2;
1469                                 i = vpd[index];
1470                                 index += 1;
1471                                 j = 0;
1472                                 Length -= (3+i);
1473                                 while(i--) {
1474                                 phba->Port[j++] = vpd[index++];
1475                                 if (j == 19)
1476                                         break;
1477                                 }
1478                                 phba->Port[j] = 0;
1479                                 continue;
1480                         }
1481                         else {
1482                                 index += 2;
1483                                 i = vpd[index];
1484                                 index += 1;
1485                                 index += i;
1486                                 Length -= (3 + i);
1487                         }
1488                 }
1489                 finished = 0;
1490                 break;
1491                 case 0x78:
1492                         finished = 1;
1493                         break;
1494                 default:
1495                         index ++;
1496                         break;
1497                 }
1498         }
1499
1500         return(1);
1501 }
1502
1503 /**
1504  * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
1505  * @phba: pointer to lpfc hba data structure.
1506  * @mdp: pointer to the data structure to hold the derived model name.
1507  * @descp: pointer to the data structure to hold the derived description.
1508  *
1509  * This routine retrieves HBA's description based on its registered PCI device
1510  * ID. The @descp passed into this function points to an array of 256 chars. It
1511  * shall be returned with the model name, maximum speed, and the host bus type.
1512  * The @mdp passed into this function points to an array of 80 chars. When the
1513  * function returns, the @mdp will be filled with the model name.
1514  **/
1515 static void
1516 lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
1517 {
1518         lpfc_vpd_t *vp;
1519         uint16_t dev_id = phba->pcidev->device;
1520         int max_speed;
1521         int GE = 0;
1522         int oneConnect = 0; /* default is not a oneConnect */
1523         struct {
1524                 char * name;
1525                 int    max_speed;
1526                 char * bus;
1527         } m = {"<Unknown>", 0, ""};
1528
1529         if (mdp && mdp[0] != '\0'
1530                 && descp && descp[0] != '\0')
1531                 return;
1532
1533         if (phba->lmt & LMT_10Gb)
1534                 max_speed = 10;
1535         else if (phba->lmt & LMT_8Gb)
1536                 max_speed = 8;
1537         else if (phba->lmt & LMT_4Gb)
1538                 max_speed = 4;
1539         else if (phba->lmt & LMT_2Gb)
1540                 max_speed = 2;
1541         else
1542                 max_speed = 1;
1543
1544         vp = &phba->vpd;
1545
1546         switch (dev_id) {
1547         case PCI_DEVICE_ID_FIREFLY:
1548                 m = (typeof(m)){"LP6000", max_speed, "PCI"};
1549                 break;
1550         case PCI_DEVICE_ID_SUPERFLY:
1551                 if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
1552                         m = (typeof(m)){"LP7000", max_speed,  "PCI"};
1553                 else
1554                         m = (typeof(m)){"LP7000E", max_speed, "PCI"};
1555                 break;
1556         case PCI_DEVICE_ID_DRAGONFLY:
1557                 m = (typeof(m)){"LP8000", max_speed, "PCI"};
1558                 break;
1559         case PCI_DEVICE_ID_CENTAUR:
1560                 if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
1561                         m = (typeof(m)){"LP9002", max_speed, "PCI"};
1562                 else
1563                         m = (typeof(m)){"LP9000", max_speed, "PCI"};
1564                 break;
1565         case PCI_DEVICE_ID_RFLY:
1566                 m = (typeof(m)){"LP952", max_speed, "PCI"};
1567                 break;
1568         case PCI_DEVICE_ID_PEGASUS:
1569                 m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
1570                 break;
1571         case PCI_DEVICE_ID_THOR:
1572                 m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
1573                 break;
1574         case PCI_DEVICE_ID_VIPER:
1575                 m = (typeof(m)){"LPX1000", max_speed,  "PCI-X"};
1576                 break;
1577         case PCI_DEVICE_ID_PFLY:
1578                 m = (typeof(m)){"LP982", max_speed, "PCI-X"};
1579                 break;
1580         case PCI_DEVICE_ID_TFLY:
1581                 m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
1582                 break;
1583         case PCI_DEVICE_ID_HELIOS:
1584                 m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
1585                 break;
1586         case PCI_DEVICE_ID_HELIOS_SCSP:
1587                 m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
1588                 break;
1589         case PCI_DEVICE_ID_HELIOS_DCSP:
1590                 m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
1591                 break;
1592         case PCI_DEVICE_ID_NEPTUNE:
1593                 m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
1594                 break;
1595         case PCI_DEVICE_ID_NEPTUNE_SCSP:
1596                 m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
1597                 break;
1598         case PCI_DEVICE_ID_NEPTUNE_DCSP:
1599                 m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
1600                 break;
1601         case PCI_DEVICE_ID_BMID:
1602                 m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
1603                 break;
1604         case PCI_DEVICE_ID_BSMB:
1605                 m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
1606                 break;
1607         case PCI_DEVICE_ID_ZEPHYR:
1608                 m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
1609                 break;
1610         case PCI_DEVICE_ID_ZEPHYR_SCSP:
1611                 m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
1612                 break;
1613         case PCI_DEVICE_ID_ZEPHYR_DCSP:
1614                 m = (typeof(m)){"LP2105", max_speed, "PCIe"};
1615                 GE = 1;
1616                 break;
1617         case PCI_DEVICE_ID_ZMID:
1618                 m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
1619                 break;
1620         case PCI_DEVICE_ID_ZSMB:
1621                 m = (typeof(m)){"LPe111", max_speed, "PCIe"};
1622                 break;
1623         case PCI_DEVICE_ID_LP101:
1624                 m = (typeof(m)){"LP101", max_speed, "PCI-X"};
1625                 break;
1626         case PCI_DEVICE_ID_LP10000S:
1627                 m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
1628                 break;
1629         case PCI_DEVICE_ID_LP11000S:
1630                 m = (typeof(m)){"LP11000-S", max_speed,
1631                         "PCI-X2"};
1632                 break;
1633         case PCI_DEVICE_ID_LPE11000S:
1634                 m = (typeof(m)){"LPe11000-S", max_speed,
1635                         "PCIe"};
1636                 break;
1637         case PCI_DEVICE_ID_SAT:
1638                 m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
1639                 break;
1640         case PCI_DEVICE_ID_SAT_MID:
1641                 m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
1642                 break;
1643         case PCI_DEVICE_ID_SAT_SMB:
1644                 m = (typeof(m)){"LPe121", max_speed, "PCIe"};
1645                 break;
1646         case PCI_DEVICE_ID_SAT_DCSP:
1647                 m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
1648                 break;
1649         case PCI_DEVICE_ID_SAT_SCSP:
1650                 m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
1651                 break;
1652         case PCI_DEVICE_ID_SAT_S:
1653                 m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
1654                 break;
1655         case PCI_DEVICE_ID_HORNET:
1656                 m = (typeof(m)){"LP21000", max_speed, "PCIe"};
1657                 GE = 1;
1658                 break;
1659         case PCI_DEVICE_ID_PROTEUS_VF:
1660                 m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
1661                 break;
1662         case PCI_DEVICE_ID_PROTEUS_PF:
1663                 m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
1664                 break;
1665         case PCI_DEVICE_ID_PROTEUS_S:
1666                 m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
1667                 break;
1668         case PCI_DEVICE_ID_TIGERSHARK:
1669                 oneConnect = 1;
1670                 m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
1671                 break;
1672         default:
1673                 m = (typeof(m)){ NULL };
1674                 break;
1675         }
1676
1677         if (mdp && mdp[0] == '\0')
1678                 snprintf(mdp, 79,"%s", m.name);
1679         /* oneConnect hba requires special processing, they are all initiators
1680          * and we put the port number on the end
1681          */
1682         if (descp && descp[0] == '\0') {
1683                 if (oneConnect)
1684                         snprintf(descp, 255,
1685                                 "Emulex OneConnect %s, FCoE Initiator, Port %s",
1686                                 m.name,
1687                                 phba->Port);
1688                 else
1689                         snprintf(descp, 255,
1690                                 "Emulex %s %d%s %s %s",
1691                                 m.name, m.max_speed,
1692                                 (GE) ? "GE" : "Gb",
1693                                 m.bus,
1694                                 (GE) ? "FCoE Adapter" :
1695                                         "Fibre Channel Adapter");
1696         }
1697 }
1698
1699 /**
1700  * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
1701  * @phba: pointer to lpfc hba data structure.
1702  * @pring: pointer to a IOCB ring.
1703  * @cnt: the number of IOCBs to be posted to the IOCB ring.
1704  *
1705  * This routine posts a given number of IOCBs with the associated DMA buffer
1706  * descriptors specified by the cnt argument to the given IOCB ring.
1707  *
1708  * Return codes
1709  *   The number of IOCBs NOT able to be posted to the IOCB ring.
1710  **/
1711 int
1712 lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
1713 {
1714         IOCB_t *icmd;
1715         struct lpfc_iocbq *iocb;
1716         struct lpfc_dmabuf *mp1, *mp2;
1717
1718         cnt += pring->missbufcnt;
1719
1720         /* While there are buffers to post */
1721         while (cnt > 0) {
1722                 /* Allocate buffer for  command iocb */
1723                 iocb = lpfc_sli_get_iocbq(phba);
1724                 if (iocb == NULL) {
1725                         pring->missbufcnt = cnt;
1726                         return cnt;
1727                 }
1728                 icmd = &iocb->iocb;
1729
1730                 /* 2 buffers can be posted per command */
1731                 /* Allocate buffer to post */
1732                 mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
1733                 if (mp1)
1734                     mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
1735                 if (!mp1 || !mp1->virt) {
1736                         kfree(mp1);
1737                         lpfc_sli_release_iocbq(phba, iocb);
1738                         pring->missbufcnt = cnt;
1739                         return cnt;
1740                 }
1741
1742                 INIT_LIST_HEAD(&mp1->list);
1743                 /* Allocate buffer to post */
1744                 if (cnt > 1) {
1745                         mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
1746                         if (mp2)
1747                                 mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
1748                                                             &mp2->phys);
1749                         if (!mp2 || !mp2->virt) {
1750                                 kfree(mp2);
1751                                 lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
1752                                 kfree(mp1);
1753                                 lpfc_sli_release_iocbq(phba, iocb);
1754                                 pring->missbufcnt = cnt;
1755                                 return cnt;
1756                         }
1757
1758                         INIT_LIST_HEAD(&mp2->list);
1759                 } else {
1760                         mp2 = NULL;
1761                 }
1762
1763                 icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
1764                 icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
1765                 icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
1766                 icmd->ulpBdeCount = 1;
1767                 cnt--;
1768                 if (mp2) {
1769                         icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
1770                         icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
1771                         icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
1772                         cnt--;
1773                         icmd->ulpBdeCount = 2;
1774                 }
1775
1776                 icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
1777                 icmd->ulpLe = 1;
1778
1779                 if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
1780                     IOCB_ERROR) {
1781                         lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
1782                         kfree(mp1);
1783                         cnt++;
1784                         if (mp2) {
1785                                 lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
1786                                 kfree(mp2);
1787                                 cnt++;
1788                         }
1789                         lpfc_sli_release_iocbq(phba, iocb);
1790                         pring->missbufcnt = cnt;
1791                         return cnt;
1792                 }
1793                 lpfc_sli_ringpostbuf_put(phba, pring, mp1);
1794                 if (mp2)
1795                         lpfc_sli_ringpostbuf_put(phba, pring, mp2);
1796         }
1797         pring->missbufcnt = 0;
1798         return 0;
1799 }
1800
1801 /**
1802  * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
1803  * @phba: pointer to lpfc hba data structure.
1804  *
1805  * This routine posts initial receive IOCB buffers to the ELS ring. The
1806  * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
1807  * set to 64 IOCBs.
1808  *
1809  * Return codes
1810  *   0 - success (currently always success)
1811  **/
1812 static int
1813 lpfc_post_rcv_buf(struct lpfc_hba *phba)
1814 {
1815         struct lpfc_sli *psli = &phba->sli;
1816
1817         /* Ring 0, ELS / CT buffers */
1818         lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0);
1819         /* Ring 2 - FCP no buffers needed */
1820
1821         return 0;
1822 }
1823
1824 #define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
1825
1826 /**
1827  * lpfc_sha_init - Set up initial array of hash table entries
1828  * @HashResultPointer: pointer to an array as hash table.
1829  *
1830  * This routine sets up the initial values to the array of hash table entries
1831  * for the LC HBAs.
1832  **/
1833 static void
1834 lpfc_sha_init(uint32_t * HashResultPointer)
1835 {
1836         HashResultPointer[0] = 0x67452301;
1837         HashResultPointer[1] = 0xEFCDAB89;
1838         HashResultPointer[2] = 0x98BADCFE;
1839         HashResultPointer[3] = 0x10325476;
1840         HashResultPointer[4] = 0xC3D2E1F0;
1841 }
1842
1843 /**
1844  * lpfc_sha_iterate - Iterate initial hash table with the working hash table
1845  * @HashResultPointer: pointer to an initial/result hash table.
1846  * @HashWorkingPointer: pointer to an working hash table.
1847  *
1848  * This routine iterates an initial hash table pointed by @HashResultPointer
1849  * with the values from the working hash table pointeed by @HashWorkingPointer.
1850  * The results are putting back to the initial hash table, returned through
1851  * the @HashResultPointer as the result hash table.
1852  **/
1853 static void
1854 lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
1855 {
1856         int t;
1857         uint32_t TEMP;
1858         uint32_t A, B, C, D, E;
1859         t = 16;
1860         do {
1861                 HashWorkingPointer[t] =
1862                     S(1,
1863                       HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
1864                                                                      8] ^
1865                       HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
1866         } while (++t <= 79);
1867         t = 0;
1868         A = HashResultPointer[0];
1869         B = HashResultPointer[1];
1870         C = HashResultPointer[2];
1871         D = HashResultPointer[3];
1872         E = HashResultPointer[4];
1873
1874         do {
1875                 if (t < 20) {
1876                         TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
1877                 } else if (t < 40) {
1878                         TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
1879                 } else if (t < 60) {
1880                         TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
1881                 } else {
1882                         TEMP = (B ^ C ^ D) + 0xCA62C1D6;
1883                 }
1884                 TEMP += S(5, A) + E + HashWorkingPointer[t];
1885                 E = D;
1886                 D = C;
1887                 C = S(30, B);
1888                 B = A;
1889                 A = TEMP;
1890         } while (++t <= 79);
1891
1892         HashResultPointer[0] += A;
1893         HashResultPointer[1] += B;
1894         HashResultPointer[2] += C;
1895         HashResultPointer[3] += D;
1896         HashResultPointer[4] += E;
1897
1898 }
1899
1900 /**
1901  * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
1902  * @RandomChallenge: pointer to the entry of host challenge random number array.
1903  * @HashWorking: pointer to the entry of the working hash array.
1904  *
1905  * This routine calculates the working hash array referred by @HashWorking
1906  * from the challenge random numbers associated with the host, referred by
1907  * @RandomChallenge. The result is put into the entry of the working hash
1908  * array and returned by reference through @HashWorking.
1909  **/
1910 static void
1911 lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
1912 {
1913         *HashWorking = (*RandomChallenge ^ *HashWorking);
1914 }
1915
1916 /**
1917  * lpfc_hba_init - Perform special handling for LC HBA initialization
1918  * @phba: pointer to lpfc hba data structure.
1919  * @hbainit: pointer to an array of unsigned 32-bit integers.
1920  *
1921  * This routine performs the special handling for LC HBA initialization.
1922  **/
1923 void
1924 lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
1925 {
1926         int t;
1927         uint32_t *HashWorking;
1928         uint32_t *pwwnn = (uint32_t *) phba->wwnn;
1929
1930         HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
1931         if (!HashWorking)
1932                 return;
1933
1934         HashWorking[0] = HashWorking[78] = *pwwnn++;
1935         HashWorking[1] = HashWorking[79] = *pwwnn;
1936
1937         for (t = 0; t < 7; t++)
1938                 lpfc_challenge_key(phba->RandomData + t, HashWorking + t);
1939
1940         lpfc_sha_init(hbainit);
1941         lpfc_sha_iterate(hbainit, HashWorking);
1942         kfree(HashWorking);
1943 }
1944
1945 /**
1946  * lpfc_cleanup - Performs vport cleanups before deleting a vport
1947  * @vport: pointer to a virtual N_Port data structure.
1948  *
1949  * This routine performs the necessary cleanups before deleting the @vport.
1950  * It invokes the discovery state machine to perform necessary state
1951  * transitions and to release the ndlps associated with the @vport. Note,
1952  * the physical port is treated as @vport 0.
1953  **/
1954 void
1955 lpfc_cleanup(struct lpfc_vport *vport)
1956 {
1957         struct lpfc_hba   *phba = vport->phba;
1958         struct lpfc_nodelist *ndlp, *next_ndlp;
1959         int i = 0;
1960
1961         if (phba->link_state > LPFC_LINK_DOWN)
1962                 lpfc_port_link_failure(vport);
1963
1964         list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
1965                 if (!NLP_CHK_NODE_ACT(ndlp)) {
1966                         ndlp = lpfc_enable_node(vport, ndlp,
1967                                                 NLP_STE_UNUSED_NODE);
1968                         if (!ndlp)
1969                                 continue;
1970                         spin_lock_irq(&phba->ndlp_lock);
1971                         NLP_SET_FREE_REQ(ndlp);
1972                         spin_unlock_irq(&phba->ndlp_lock);
1973                         /* Trigger the release of the ndlp memory */
1974                         lpfc_nlp_put(ndlp);
1975                         continue;
1976                 }
1977                 spin_lock_irq(&phba->ndlp_lock);
1978                 if (NLP_CHK_FREE_REQ(ndlp)) {
1979                         /* The ndlp should not be in memory free mode already */
1980                         spin_unlock_irq(&phba->ndlp_lock);
1981                         continue;
1982                 } else
1983                         /* Indicate request for freeing ndlp memory */
1984                         NLP_SET_FREE_REQ(ndlp);
1985                 spin_unlock_irq(&phba->ndlp_lock);
1986
1987                 if (vport->port_type != LPFC_PHYSICAL_PORT &&
1988                     ndlp->nlp_DID == Fabric_DID) {
1989                         /* Just free up ndlp with Fabric_DID for vports */
1990                         lpfc_nlp_put(ndlp);
1991                         continue;
1992                 }
1993
1994                 if (ndlp->nlp_type & NLP_FABRIC)
1995                         lpfc_disc_state_machine(vport, ndlp, NULL,
1996                                         NLP_EVT_DEVICE_RECOVERY);
1997
1998                 lpfc_disc_state_machine(vport, ndlp, NULL,
1999                                              NLP_EVT_DEVICE_RM);
2000
2001         }
2002
2003         /* At this point, ALL ndlp's should be gone
2004          * because of the previous NLP_EVT_DEVICE_RM.
2005          * Lets wait for this to happen, if needed.
2006          */
2007         while (!list_empty(&vport->fc_nodes)) {
2008                 if (i++ > 3000) {
2009                         lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
2010                                 "0233 Nodelist not empty\n");
2011                         list_for_each_entry_safe(ndlp, next_ndlp,
2012                                                 &vport->fc_nodes, nlp_listp) {
2013                                 lpfc_printf_vlog(ndlp->vport, KERN_ERR,
2014                                                 LOG_NODE,
2015                                                 "0282 did:x%x ndlp:x%p "
2016                                                 "usgmap:x%x refcnt:%d\n",
2017                                                 ndlp->nlp_DID, (void *)ndlp,
2018                                                 ndlp->nlp_usg_map,
2019                                                 atomic_read(
2020                                                         &ndlp->kref.refcount));
2021                         }
2022                         break;
2023                 }
2024
2025                 /* Wait for any activity on ndlps to settle */
2026                 msleep(10);
2027         }
2028 }
2029
2030 /**
2031  * lpfc_stop_vport_timers - Stop all the timers associated with a vport
2032  * @vport: pointer to a virtual N_Port data structure.
2033  *
2034  * This routine stops all the timers associated with a @vport. This function
2035  * is invoked before disabling or deleting a @vport. Note that the physical
2036  * port is treated as @vport 0.
2037  **/
2038 void
2039 lpfc_stop_vport_timers(struct lpfc_vport *vport)
2040 {
2041         del_timer_sync(&vport->els_tmofunc);
2042         del_timer_sync(&vport->fc_fdmitmo);
2043         lpfc_can_disctmo(vport);
2044         return;
2045 }
2046
2047 /**
2048  * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
2049  * @phba: pointer to lpfc hba data structure.
2050  *
2051  * This routine stops all the timers associated with a HBA. This function is
2052  * invoked before either putting a HBA offline or unloading the driver.
2053  **/
2054 void
2055 lpfc_stop_hba_timers(struct lpfc_hba *phba)
2056 {
2057         lpfc_stop_vport_timers(phba->pport);
2058         del_timer_sync(&phba->sli.mbox_tmo);
2059         del_timer_sync(&phba->fabric_block_timer);
2060         del_timer_sync(&phba->eratt_poll);
2061         del_timer_sync(&phba->hb_tmofunc);
2062         phba->hb_outstanding = 0;
2063
2064         switch (phba->pci_dev_grp) {
2065         case LPFC_PCI_DEV_LP:
2066                 /* Stop any LightPulse device specific driver timers */
2067                 del_timer_sync(&phba->fcp_poll_timer);
2068                 break;
2069         case LPFC_PCI_DEV_OC:
2070                 /* Stop any OneConnect device sepcific driver timers */
2071                 break;
2072         default:
2073                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2074                                 "0297 Invalid device group (x%x)\n",
2075                                 phba->pci_dev_grp);
2076                 break;
2077         }
2078         return;
2079 }
2080
2081 /**
2082  * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
2083  * @phba: pointer to lpfc hba data structure.
2084  *
2085  * This routine marks a HBA's management interface as blocked. Once the HBA's
2086  * management interface is marked as blocked, all the user space access to
2087  * the HBA, whether they are from sysfs interface or libdfc interface will
2088  * all be blocked. The HBA is set to block the management interface when the
2089  * driver prepares the HBA interface for online or offline.
2090  **/
2091 static void
2092 lpfc_block_mgmt_io(struct lpfc_hba * phba)
2093 {
2094         unsigned long iflag;
2095
2096         spin_lock_irqsave(&phba->hbalock, iflag);
2097         phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
2098         spin_unlock_irqrestore(&phba->hbalock, iflag);
2099 }
2100
2101 /**
2102  * lpfc_online - Initialize and bring a HBA online
2103  * @phba: pointer to lpfc hba data structure.
2104  *
2105  * This routine initializes the HBA and brings a HBA online. During this
2106  * process, the management interface is blocked to prevent user space access
2107  * to the HBA interfering with the driver initialization.
2108  *
2109  * Return codes
2110  *   0 - successful
2111  *   1 - failed
2112  **/
2113 int
2114 lpfc_online(struct lpfc_hba *phba)
2115 {
2116         struct lpfc_vport *vport;
2117         struct lpfc_vport **vports;
2118         int i;
2119
2120         if (!phba)
2121                 return 0;
2122         vport = phba->pport;
2123
2124         if (!(vport->fc_flag & FC_OFFLINE_MODE))
2125                 return 0;
2126
2127         lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
2128                         "0458 Bring Adapter online\n");
2129
2130         lpfc_block_mgmt_io(phba);
2131
2132         if (!lpfc_sli_queue_setup(phba)) {
2133                 lpfc_unblock_mgmt_io(phba);
2134                 return 1;
2135         }
2136
2137         if (phba->sli_rev == LPFC_SLI_REV4) {
2138                 if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
2139                         lpfc_unblock_mgmt_io(phba);
2140                         return 1;
2141                 }
2142         } else {
2143                 if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
2144                         lpfc_unblock_mgmt_io(phba);
2145                         return 1;
2146                 }
2147         }
2148
2149         vports = lpfc_create_vport_work_array(phba);
2150         if (vports != NULL)
2151                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
2152                         struct Scsi_Host *shost;
2153                         shost = lpfc_shost_from_vport(vports[i]);
2154                         spin_lock_irq(shost->host_lock);
2155                         vports[i]->fc_flag &= ~FC_OFFLINE_MODE;
2156                         if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
2157                                 vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
2158                         if (phba->sli_rev == LPFC_SLI_REV4)
2159                                 vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
2160                         spin_unlock_irq(shost->host_lock);
2161                 }
2162                 lpfc_destroy_vport_work_array(phba, vports);
2163
2164         lpfc_unblock_mgmt_io(phba);
2165         return 0;
2166 }
2167
2168 /**
2169  * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
2170  * @phba: pointer to lpfc hba data structure.
2171  *
2172  * This routine marks a HBA's management interface as not blocked. Once the
2173  * HBA's management interface is marked as not blocked, all the user space
2174  * access to the HBA, whether they are from sysfs interface or libdfc
2175  * interface will be allowed. The HBA is set to block the management interface
2176  * when the driver prepares the HBA interface for online or offline and then
2177  * set to unblock the management interface afterwards.
2178  **/
2179 void
2180 lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
2181 {
2182         unsigned long iflag;
2183
2184         spin_lock_irqsave(&phba->hbalock, iflag);
2185         phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
2186         spin_unlock_irqrestore(&phba->hbalock, iflag);
2187 }
2188
2189 /**
2190  * lpfc_offline_prep - Prepare a HBA to be brought offline
2191  * @phba: pointer to lpfc hba data structure.
2192  *
2193  * This routine is invoked to prepare a HBA to be brought offline. It performs
2194  * unregistration login to all the nodes on all vports and flushes the mailbox
2195  * queue to make it ready to be brought offline.
2196  **/
2197 void
2198 lpfc_offline_prep(struct lpfc_hba * phba)
2199 {
2200         struct lpfc_vport *vport = phba->pport;
2201         struct lpfc_nodelist  *ndlp, *next_ndlp;
2202         struct lpfc_vport **vports;
2203         int i;
2204
2205         if (vport->fc_flag & FC_OFFLINE_MODE)
2206                 return;
2207
2208         lpfc_block_mgmt_io(phba);
2209
2210         lpfc_linkdown(phba);
2211
2212         /* Issue an unreg_login to all nodes on all vports */
2213         vports = lpfc_create_vport_work_array(phba);
2214         if (vports != NULL) {
2215                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
2216                         struct Scsi_Host *shost;
2217
2218                         if (vports[i]->load_flag & FC_UNLOADING)
2219                                 continue;
2220                         vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
2221                         shost = lpfc_shost_from_vport(vports[i]);
2222                         list_for_each_entry_safe(ndlp, next_ndlp,
2223                                                  &vports[i]->fc_nodes,
2224                                                  nlp_listp) {
2225                                 if (!NLP_CHK_NODE_ACT(ndlp))
2226                                         continue;
2227                                 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
2228                                         continue;
2229                                 if (ndlp->nlp_type & NLP_FABRIC) {
2230                                         lpfc_disc_state_machine(vports[i], ndlp,
2231                                                 NULL, NLP_EVT_DEVICE_RECOVERY);
2232                                         lpfc_disc_state_machine(vports[i], ndlp,
2233                                                 NULL, NLP_EVT_DEVICE_RM);
2234                                 }
2235                                 spin_lock_irq(shost->host_lock);
2236                                 ndlp->nlp_flag &= ~NLP_NPR_ADISC;
2237                                 spin_unlock_irq(shost->host_lock);
2238                                 lpfc_unreg_rpi(vports[i], ndlp);
2239                         }
2240                 }
2241         }
2242         lpfc_destroy_vport_work_array(phba, vports);
2243
2244         lpfc_sli_mbox_sys_shutdown(phba);
2245 }
2246
2247 /**
2248  * lpfc_offline - Bring a HBA offline
2249  * @phba: pointer to lpfc hba data structure.
2250  *
2251  * This routine actually brings a HBA offline. It stops all the timers
2252  * associated with the HBA, brings down the SLI layer, and eventually
2253  * marks the HBA as in offline state for the upper layer protocol.
2254  **/
2255 void
2256 lpfc_offline(struct lpfc_hba *phba)
2257 {
2258         struct Scsi_Host  *shost;
2259         struct lpfc_vport **vports;
2260         int i;
2261
2262         if (phba->pport->fc_flag & FC_OFFLINE_MODE)
2263                 return;
2264
2265         /* stop port and all timers associated with this hba */
2266         lpfc_stop_port(phba);
2267         vports = lpfc_create_vport_work_array(phba);
2268         if (vports != NULL)
2269                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
2270                         lpfc_stop_vport_timers(vports[i]);
2271         lpfc_destroy_vport_work_array(phba, vports);
2272         lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
2273                         "0460 Bring Adapter offline\n");
2274         /* Bring down the SLI Layer and cleanup.  The HBA is offline
2275            now.  */
2276         lpfc_sli_hba_down(phba);
2277         spin_lock_irq(&phba->hbalock);
2278         phba->work_ha = 0;
2279         spin_unlock_irq(&phba->hbalock);
2280         vports = lpfc_create_vport_work_array(phba);
2281         if (vports != NULL)
2282                 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
2283                         shost = lpfc_shost_from_vport(vports[i]);
2284                         spin_lock_irq(shost->host_lock);
2285                         vports[i]->work_port_events = 0;
2286                         vports[i]->fc_flag |= FC_OFFLINE_MODE;
2287                         spin_unlock_irq(shost->host_lock);
2288                 }
2289         lpfc_destroy_vport_work_array(phba, vports);
2290 }
2291
2292 /**
2293  * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
2294  * @phba: pointer to lpfc hba data structure.
2295  *
2296  * This routine is to free all the SCSI buffers and IOCBs from the driver
2297  * list back to kernel. It is called from lpfc_pci_remove_one to free
2298  * the internal resources before the device is removed from the system.
2299  *
2300  * Return codes
2301  *   0 - successful (for now, it always returns 0)
2302  **/
2303 static int
2304 lpfc_scsi_free(struct lpfc_hba *phba)
2305 {
2306         struct lpfc_scsi_buf *sb, *sb_next;
2307         struct lpfc_iocbq *io, *io_next;
2308
2309         spin_lock_irq(&phba->hbalock);
2310         /* Release all the lpfc_scsi_bufs maintained by this host. */
2311         list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
2312                 list_del(&sb->list);
2313                 pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
2314                               sb->dma_handle);
2315                 kfree(sb);
2316                 phba->total_scsi_bufs--;
2317         }
2318
2319         /* Release all the lpfc_iocbq entries maintained by this host. */
2320         list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
2321                 list_del(&io->list);
2322                 kfree(io);
2323                 phba->total_iocbq_bufs--;
2324         }
2325
2326         spin_unlock_irq(&phba->hbalock);
2327
2328         return 0;
2329 }
2330
2331 /**
2332  * lpfc_create_port - Create an FC port
2333  * @phba: pointer to lpfc hba data structure.
2334  * @instance: a unique integer ID to this FC port.
2335  * @dev: pointer to the device data structure.
2336  *
2337  * This routine creates a FC port for the upper layer protocol. The FC port
2338  * can be created on top of either a physical port or a virtual port provided
2339  * by the HBA. This routine also allocates a SCSI host data structure (shost)
2340  * and associates the FC port created before adding the shost into the SCSI
2341  * layer.
2342  *
2343  * Return codes
2344  *   @vport - pointer to the virtual N_Port data structure.
2345  *   NULL - port create failed.
2346  **/
2347 struct lpfc_vport *
2348 lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
2349 {
2350         struct lpfc_vport *vport;
2351         struct Scsi_Host  *shost;
2352         int error = 0;
2353
2354         if (dev != &phba->pcidev->dev)
2355                 shost = scsi_host_alloc(&lpfc_vport_template,
2356                                         sizeof(struct lpfc_vport));
2357         else
2358                 shost = scsi_host_alloc(&lpfc_template,
2359                                         sizeof(struct lpfc_vport));
2360         if (!shost)
2361                 goto out;
2362
2363         vport = (struct lpfc_vport *) shost->hostdata;
2364         vport->phba = phba;
2365         vport->load_flag |= FC_LOADING;
2366         vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
2367         vport->fc_rscn_flush = 0;
2368
2369         lpfc_get_vport_cfgparam(vport);
2370         shost->unique_id = instance;
2371         shost->max_id = LPFC_MAX_TARGET;
2372         shost->max_lun = vport->cfg_max_luns;
2373         shost->this_id = -1;
2374         shost->max_cmd_len = 16;
2375         if (phba->sli_rev == LPFC_SLI_REV4) {
2376                 shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
2377                 shost->sg_tablesize = phba->cfg_sg_seg_cnt;
2378         }
2379
2380         /*
2381          * Set initial can_queue value since 0 is no longer supported and
2382          * scsi_add_host will fail. This will be adjusted later based on the
2383          * max xri value determined in hba setup.
2384          */
2385         shost->can_queue = phba->cfg_hba_queue_depth - 10;
2386         if (dev != &phba->pcidev->dev) {
2387                 shost->transportt = lpfc_vport_transport_template;
2388                 vport->port_type = LPFC_NPIV_PORT;
2389         } else {
2390                 shost->transportt = lpfc_transport_template;
2391                 vport->port_type = LPFC_PHYSICAL_PORT;
2392         }
2393
2394         /* Initialize all internally managed lists. */
2395         INIT_LIST_HEAD(&vport->fc_nodes);
2396         INIT_LIST_HEAD(&vport->rcv_buffer_list);
2397         spin_lock_init(&vport->work_port_lock);
2398
2399         init_timer(&vport->fc_disctmo);
2400         vport->fc_disctmo.function = lpfc_disc_timeout;
2401         vport->fc_disctmo.data = (unsigned long)vport;
2402
2403         init_timer(&vport->fc_fdmitmo);
2404         vport->fc_fdmitmo.function = lpfc_fdmi_tmo;
2405         vport->fc_fdmitmo.data = (unsigned long)vport;
2406
2407         init_timer(&vport->els_tmofunc);
2408         vport->els_tmofunc.function = lpfc_els_timeout;
2409         vport->els_tmofunc.data = (unsigned long)vport;
2410
2411         error = scsi_add_host(shost, dev);
2412         if (error)
2413                 goto out_put_shost;
2414
2415         spin_lock_irq(&phba->hbalock);
2416         list_add_tail(&vport->listentry, &phba->port_list);
2417         spin_unlock_irq(&phba->hbalock);
2418         return vport;
2419
2420 out_put_shost:
2421         scsi_host_put(shost);
2422 out:
2423         return NULL;
2424 }
2425
2426 /**
2427  * destroy_port -  destroy an FC port
2428  * @vport: pointer to an lpfc virtual N_Port data structure.
2429  *
2430  * This routine destroys a FC port from the upper layer protocol. All the
2431  * resources associated with the port are released.
2432  **/
2433 void
2434 destroy_port(struct lpfc_vport *vport)
2435 {
2436         struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
2437         struct lpfc_hba  *phba = vport->phba;
2438
2439         lpfc_debugfs_terminate(vport);
2440         fc_remove_host(shost);
2441         scsi_remove_host(shost);
2442
2443         spin_lock_irq(&phba->hbalock);
2444         list_del_init(&vport->listentry);
2445         spin_unlock_irq(&phba->hbalock);
2446
2447         lpfc_cleanup(vport);
2448         return;
2449 }
2450
2451 /**
2452  * lpfc_get_instance - Get a unique integer ID
2453  *
2454  * This routine allocates a unique integer ID from lpfc_hba_index pool. It
2455  * uses the kernel idr facility to perform the task.
2456  *
2457  * Return codes:
2458  *   instance - a unique integer ID allocated as the new instance.
2459  *   -1 - lpfc get instance failed.
2460  **/
2461 int
2462 lpfc_get_instance(void)
2463 {
2464         int instance = 0;
2465
2466         /* Assign an unused number */
2467         if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
2468                 return -1;
2469         if (idr_get_new(&lpfc_hba_index, NULL, &instance))
2470                 return -1;
2471         return instance;
2472 }
2473
2474 /**
2475  * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
2476  * @shost: pointer to SCSI host data structure.
2477  * @time: elapsed time of the scan in jiffies.
2478  *
2479  * This routine is called by the SCSI layer with a SCSI host to determine
2480  * whether the scan host is finished.
2481  *
2482  * Note: there is no scan_start function as adapter initialization will have
2483  * asynchronously kicked off the link initialization.
2484  *
2485  * Return codes
2486  *   0 - SCSI host scan is not over yet.
2487  *   1 - SCSI host scan is over.
2488  **/
2489 int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
2490 {
2491         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2492         struct lpfc_hba   *phba = vport->phba;
2493         int stat = 0;
2494
2495         spin_lock_irq(shost->host_lock);
2496
2497         if (vport->load_flag & FC_UNLOADING) {
2498                 stat = 1;
2499                 goto finished;
2500         }
2501         if (time >= 30 * HZ) {
2502                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
2503                                 "0461 Scanning longer than 30 "
2504                                 "seconds.  Continuing initialization\n");
2505                 stat = 1;
2506                 goto finished;
2507         }
2508         if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) {
2509                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
2510                                 "0465 Link down longer than 15 "
2511                                 "seconds.  Continuing initialization\n");
2512                 stat = 1;
2513                 goto finished;
2514         }
2515
2516         if (vport->port_state != LPFC_VPORT_READY)
2517                 goto finished;
2518         if (vport->num_disc_nodes || vport->fc_prli_sent)
2519                 goto finished;
2520         if (vport->fc_map_cnt == 0 && time < 2 * HZ)
2521                 goto finished;
2522         if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
2523                 goto finished;
2524
2525         stat = 1;
2526
2527 finished:
2528         spin_unlock_irq(shost->host_lock);
2529         return stat;
2530 }
2531
2532 /**
2533  * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
2534  * @shost: pointer to SCSI host data structure.
2535  *
2536  * This routine initializes a given SCSI host attributes on a FC port. The
2537  * SCSI host can be either on top of a physical port or a virtual port.
2538  **/
2539 void lpfc_host_attrib_init(struct Scsi_Host *shost)
2540 {
2541         struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
2542         struct lpfc_hba   *phba = vport->phba;
2543         /*
2544          * Set fixed host attributes.  Must done after lpfc_sli_hba_setup().
2545          */
2546
2547         fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
2548         fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
2549         fc_host_supported_classes(shost) = FC_COS_CLASS3;
2550
2551         memset(fc_host_supported_fc4s(shost), 0,
2552                sizeof(fc_host_supported_fc4s(shost)));
2553         fc_host_supported_fc4s(shost)[2] = 1;
2554         fc_host_supported_fc4s(shost)[7] = 1;
2555
2556         lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
2557                                  sizeof fc_host_symbolic_name(shost));
2558
2559         fc_host_supported_speeds(shost) = 0;
2560         if (phba->lmt & LMT_10Gb)
2561                 fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
2562         if (phba->lmt & LMT_8Gb)
2563                 fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
2564         if (phba->lmt & LMT_4Gb)
2565                 fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
2566         if (phba->lmt & LMT_2Gb)
2567                 fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
2568         if (phba->lmt & LMT_1Gb)
2569                 fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
2570
2571         fc_host_maxframe_size(shost) =
2572                 (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
2573                 (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;
2574
2575         /* This value is also unchanging */
2576         memset(fc_host_active_fc4s(shost), 0,
2577                sizeof(fc_host_active_fc4s(shost)));
2578         fc_host_active_fc4s(shost)[2] = 1;
2579         fc_host_active_fc4s(shost)[7] = 1;
2580
2581         fc_host_max_npiv_vports(shost) = phba->max_vpi;
2582         spin_lock_irq(shost->host_lock);
2583         vport->load_flag &= ~FC_LOADING;
2584         spin_unlock_irq(shost->host_lock);
2585 }
2586
2587 /**
2588  * lpfc_stop_port_s3 - Stop SLI3 device port
2589  * @phba: pointer to lpfc hba data structure.
2590  *
2591  * This routine is invoked to stop an SLI3 device port, it stops the device
2592  * from generating interrupts and stops the device driver's timers for the
2593  * device.
2594  **/
2595 static void
2596 lpfc_stop_port_s3(struct lpfc_hba *phba)
2597 {
2598         /* Clear all interrupt enable conditions */
2599         writel(0, phba->HCregaddr);
2600         readl(phba->HCregaddr); /* flush */
2601         /* Clear all pending interrupts */
2602         writel(0xffffffff, phba->HAregaddr);
2603         readl(phba->HAregaddr); /* flush */
2604
2605         /* Reset some HBA SLI setup states */
2606         lpfc_stop_hba_timers(phba);
2607         phba->pport->work_port_events = 0;
2608 }
2609
2610 /**
2611  * lpfc_stop_port_s4 - Stop SLI4 device port
2612  * @phba: pointer to lpfc hba data structure.
2613  *
2614  * This routine is invoked to stop an SLI4 device port, it stops the device
2615  * from generating interrupts and stops the device driver's timers for the
2616  * device.
2617  **/
2618 static void
2619 lpfc_stop_port_s4(struct lpfc_hba *phba)
2620 {
2621         /* Reset some HBA SLI4 setup states */
2622         lpfc_stop_hba_timers(phba);
2623         phba->pport->work_port_events = 0;
2624         phba->sli4_hba.intr_enable = 0;
2625         /* Hard clear it for now, shall have more graceful way to wait later */
2626         phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2627 }
2628
2629 /**
2630  * lpfc_stop_port - Wrapper function for stopping hba port
2631  * @phba: Pointer to HBA context object.
2632  *
2633  * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
2634  * the API jump table function pointer from the lpfc_hba struct.
2635  **/
2636 void
2637 lpfc_stop_port(struct lpfc_hba *phba)
2638 {
2639         phba->lpfc_stop_port(phba);
2640 }
2641
2642 /**
2643  * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
2644  * @phba: pointer to lpfc hba data structure.
2645  *
2646  * This routine is invoked to remove the driver default fcf record from
2647  * the port.  This routine currently acts on FCF Index 0.
2648  *
2649  **/
2650 void
2651 lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
2652 {
2653         int rc = 0;
2654         LPFC_MBOXQ_t *mboxq;
2655         struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
2656         uint32_t mbox_tmo, req_len;
2657         uint32_t shdr_status, shdr_add_status;
2658
2659         mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
2660         if (!mboxq) {
2661                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2662                         "2020 Failed to allocate mbox for ADD_FCF cmd\n");
2663                 return;
2664         }
2665
2666         req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
2667                   sizeof(struct lpfc_sli4_cfg_mhdr);
2668         rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
2669                               LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
2670                               req_len, LPFC_SLI4_MBX_EMBED);
2671         /*
2672          * In phase 1, there is a single FCF index, 0.  In phase2, the driver
2673          * supports multiple FCF indices.
2674          */
2675         del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
2676         bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
2677         bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
2678                phba->fcf.fcf_indx);
2679
2680         if (!phba->sli4_hba.intr_enable)
2681                 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
2682         else {
2683                 mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
2684                 rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
2685         }
2686         /* The IOCTL status is embedded in the mailbox subheader. */
2687         shdr_status = bf_get(lpfc_mbox_hdr_status,
2688                              &del_fcf_record->header.cfg_shdr.response);
2689         shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
2690                                  &del_fcf_record->header.cfg_shdr.response);
2691         if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
2692                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2693                                 "2516 DEL FCF of default FCF Index failed "
2694                                 "mbx status x%x, status x%x add_status x%x\n",
2695                                 rc, shdr_status, shdr_add_status);
2696         }
2697         if (rc != MBX_TIMEOUT)
2698                 mempool_free(mboxq, phba->mbox_mem_pool);
2699 }
2700
2701 /**
2702  * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
2703  * @phba: pointer to lpfc hba data structure.
2704  * @acqe_link: pointer to the async link completion queue entry.
2705  *
2706  * This routine is to parse the SLI4 link-attention link fault code and
2707  * translate it into the base driver's read link attention mailbox command
2708  * status.
2709  *
2710  * Return: Link-attention status in terms of base driver's coding.
2711  **/
2712 static uint16_t
2713 lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
2714                            struct lpfc_acqe_link *acqe_link)
2715 {
2716         uint16_t latt_fault;
2717
2718         switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
2719         case LPFC_ASYNC_LINK_FAULT_NONE:
2720         case LPFC_ASYNC_LINK_FAULT_LOCAL:
2721         case LPFC_ASYNC_LINK_FAULT_REMOTE:
2722                 latt_fault = 0;
2723                 break;
2724         default:
2725                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2726                                 "0398 Invalid link fault code: x%x\n",
2727                                 bf_get(lpfc_acqe_link_fault, acqe_link));
2728                 latt_fault = MBXERR_ERROR;
2729                 break;
2730         }
2731         return latt_fault;
2732 }
2733
2734 /**
2735  * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
2736  * @phba: pointer to lpfc hba data structure.
2737  * @acqe_link: pointer to the async link completion queue entry.
2738  *
2739  * This routine is to parse the SLI4 link attention type and translate it
2740  * into the base driver's link attention type coding.
2741  *
2742  * Return: Link attention type in terms of base driver's coding.
2743  **/
2744 static uint8_t
2745 lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
2746                           struct lpfc_acqe_link *acqe_link)
2747 {
2748         uint8_t att_type;
2749
2750         switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
2751         case LPFC_ASYNC_LINK_STATUS_DOWN:
2752         case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
2753                 att_type = AT_LINK_DOWN;
2754                 break;
2755         case LPFC_ASYNC_LINK_STATUS_UP:
2756                 /* Ignore physical link up events - wait for logical link up */
2757                 att_type = AT_RESERVED;
2758                 break;
2759         case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
2760                 att_type = AT_LINK_UP;
2761                 break;
2762         default:
2763                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2764                                 "0399 Invalid link attention type: x%x\n",
2765                                 bf_get(lpfc_acqe_link_status, acqe_link));
2766                 att_type = AT_RESERVED;
2767                 break;
2768         }
2769         return att_type;
2770 }
2771
2772 /**
2773  * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
2774  * @phba: pointer to lpfc hba data structure.
2775  * @acqe_link: pointer to the async link completion queue entry.
2776  *
2777  * This routine is to parse the SLI4 link-attention link speed and translate
2778  * it into the base driver's link-attention link speed coding.
2779  *
2780  * Return: Link-attention link speed in terms of base driver's coding.
2781  **/
2782 static uint8_t
2783 lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
2784                                 struct lpfc_acqe_link *acqe_link)
2785 {
2786         uint8_t link_speed;
2787
2788         switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
2789         case LPFC_ASYNC_LINK_SPEED_ZERO:
2790                 link_speed = LA_UNKNW_LINK;
2791                 break;
2792         case LPFC_ASYNC_LINK_SPEED_10MBPS:
2793                 link_speed = LA_UNKNW_LINK;
2794                 break;
2795         case LPFC_ASYNC_LINK_SPEED_100MBPS:
2796                 link_speed = LA_UNKNW_LINK;
2797                 break;
2798         case LPFC_ASYNC_LINK_SPEED_1GBPS:
2799                 link_speed = LA_1GHZ_LINK;
2800                 break;
2801         case LPFC_ASYNC_LINK_SPEED_10GBPS:
2802                 link_speed = LA_10GHZ_LINK;
2803                 break;
2804         default:
2805                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2806                                 "0483 Invalid link-attention link speed: x%x\n",
2807                                 bf_get(lpfc_acqe_link_speed, acqe_link));
2808                 link_speed = LA_UNKNW_LINK;
2809                 break;
2810         }
2811         return link_speed;
2812 }
2813
2814 /**
2815  * lpfc_sli4_async_link_evt - Process the asynchronous link event
2816  * @phba: pointer to lpfc hba data structure.
2817  * @acqe_link: pointer to the async link completion queue entry.
2818  *
2819  * This routine is to handle the SLI4 asynchronous link event.
2820  **/
2821 static void
2822 lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
2823                          struct lpfc_acqe_link *acqe_link)
2824 {
2825         struct lpfc_dmabuf *mp;
2826         LPFC_MBOXQ_t *pmb;
2827         MAILBOX_t *mb;
2828         READ_LA_VAR *la;
2829         uint8_t att_type;
2830
2831         att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
2832         if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
2833                 return;
2834         phba->fcoe_eventtag = acqe_link->event_tag;
2835         pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
2836         if (!pmb) {
2837                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2838                                 "0395 The mboxq allocation failed\n");
2839                 return;
2840         }
2841         mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
2842         if (!mp) {
2843                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2844                                 "0396 The lpfc_dmabuf allocation failed\n");
2845                 goto out_free_pmb;
2846         }
2847         mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
2848         if (!mp->virt) {
2849                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2850                                 "0397 The mbuf allocation failed\n");
2851                 goto out_free_dmabuf;
2852         }
2853
2854         /* Cleanup any outstanding ELS commands */
2855         lpfc_els_flush_all_cmd(phba);
2856
2857         /* Block ELS IOCBs until we have done process link event */
2858         phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
2859
2860         /* Update link event statistics */
2861         phba->sli.slistat.link_event++;
2862
2863         /* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
2864         lpfc_read_la(phba, pmb, mp);
2865         pmb->vport = phba->pport;
2866
2867         /* Parse and translate status field */
2868         mb = &pmb->u.mb;
2869         mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
2870
2871         /* Parse and translate link attention fields */
2872         la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
2873         la->eventTag = acqe_link->event_tag;
2874         la->attType = att_type;
2875         la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
2876
2877         /* Fake the the following irrelvant fields */
2878         la->topology = TOPOLOGY_PT_PT;
2879         la->granted_AL_PA = 0;
2880         la->il = 0;
2881         la->pb = 0;
2882         la->fa = 0;
2883         la->mm = 0;
2884
2885         /* Keep the link status for extra SLI4 state machine reference */
2886         phba->sli4_hba.link_state.speed =
2887                                 bf_get(lpfc_acqe_link_speed, acqe_link);
2888         phba->sli4_hba.link_state.duplex =
2889                                 bf_get(lpfc_acqe_link_duplex, acqe_link);
2890         phba->sli4_hba.link_state.status =
2891                                 bf_get(lpfc_acqe_link_status, acqe_link);
2892         phba->sli4_hba.link_state.physical =
2893                                 bf_get(lpfc_acqe_link_physical, acqe_link);
2894         phba->sli4_hba.link_state.fault =
2895                                 bf_get(lpfc_acqe_link_fault, acqe_link);
2896
2897         /* Invoke the lpfc_handle_latt mailbox command callback function */
2898         lpfc_mbx_cmpl_read_la(phba, pmb);
2899
2900         return;
2901
2902 out_free_dmabuf:
2903         kfree(mp);
2904 out_free_pmb:
2905         mempool_free(pmb, phba->mbox_mem_pool);
2906 }
2907
2908 /**
2909  * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
2910  * @phba: pointer to lpfc hba data structure.
2911  * @acqe_link: pointer to the async fcoe completion queue entry.
2912  *
2913  * This routine is to handle the SLI4 asynchronous fcoe event.
2914  **/
2915 static void
2916 lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
2917                          struct lpfc_acqe_fcoe *acqe_fcoe)
2918 {
2919         uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
2920         int rc;
2921
2922         phba->fcoe_eventtag = acqe_fcoe->event_tag;
2923         switch (event_type) {
2924         case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
2925                 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
2926                         "2546 New FCF found index 0x%x tag 0x%x\n",
2927                         acqe_fcoe->fcf_index,
2928                         acqe_fcoe->event_tag);
2929                 /*
2930                  * If the current FCF is in discovered state, or
2931                  * FCF discovery is in progress do nothing.
2932                  */
2933                 spin_lock_irq(&phba->hbalock);
2934                 if ((phba->fcf.fcf_flag & FCF_DISCOVERED) ||
2935                    (phba->hba_flag & FCF_DISC_INPROGRESS)) {
2936                         spin_unlock_irq(&phba->hbalock);
2937                         break;
2938                 }
2939                 spin_unlock_irq(&phba->hbalock);
2940
2941                 /* Read the FCF table and re-discover SAN. */
2942                 rc = lpfc_sli4_read_fcf_record(phba,
2943                         LPFC_FCOE_FCF_GET_FIRST);
2944                 if (rc)
2945                         lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
2946                                 "2547 Read FCF record failed 0x%x\n",
2947                                 rc);
2948                 break;
2949
2950         case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
2951                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2952                         "2548 FCF Table full count 0x%x tag 0x%x\n",
2953                         bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
2954                         acqe_fcoe->event_tag);
2955                 break;
2956
2957         case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
2958                 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
2959                         "2549 FCF disconnected fron network index 0x%x"
2960                         " tag 0x%x\n", acqe_fcoe->fcf_index,
2961                         acqe_fcoe->event_tag);
2962                 /* If the event is not for currently used fcf do nothing */
2963                 if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
2964                         break;
2965                 /*
2966                  * Currently, driver support only one FCF - so treat this as
2967                  * a link down.
2968                  */
2969                 lpfc_linkdown(phba);
2970                 /* Unregister FCF if no devices connected to it */
2971                 lpfc_unregister_unused_fcf(phba);
2972                 break;
2973
2974         default:
2975                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2976                         "0288 Unknown FCoE event type 0x%x event tag "
2977                         "0x%x\n", event_type, acqe_fcoe->event_tag);
2978                 break;
2979         }
2980 }
2981
2982 /**
2983  * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
2984  * @phba: pointer to lpfc hba data structure.
2985  * @acqe_link: pointer to the async dcbx completion queue entry.
2986  *
2987  * This routine is to handle the SLI4 asynchronous dcbx event.
2988  **/
2989 static void
2990 lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
2991                          struct lpfc_acqe_dcbx *acqe_dcbx)
2992 {
2993         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
2994                         "0290 The SLI4 DCBX asynchronous event is not "
2995                         "handled yet\n");
2996 }
2997
2998 /**
2999  * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
3000  * @phba: pointer to lpfc hba data structure.
3001  *
3002  * This routine is invoked by the worker thread to process all the pending
3003  * SLI4 asynchronous events.
3004  **/
3005 void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
3006 {
3007         struct lpfc_cq_event *cq_event;
3008
3009         /* First, declare the async event has been handled */
3010         spin_lock_irq(&phba->hbalock);
3011         phba->hba_flag &= ~ASYNC_EVENT;
3012         spin_unlock_irq(&phba->hbalock);
3013         /* Now, handle all the async events */
3014         while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
3015                 /* Get the first event from the head of the event queue */
3016                 spin_lock_irq(&phba->hbalock);
3017                 list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
3018                                  cq_event, struct lpfc_cq_event, list);
3019                 spin_unlock_irq(&phba->hbalock);
3020                 /* Process the asynchronous event */
3021                 switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
3022                 case LPFC_TRAILER_CODE_LINK:
3023                         lpfc_sli4_async_link_evt(phba,
3024                                                  &cq_event->cqe.acqe_link);
3025                         break;
3026                 case LPFC_TRAILER_CODE_FCOE:
3027                         lpfc_sli4_async_fcoe_evt(phba,
3028                                                  &cq_event->cqe.acqe_fcoe);
3029                         break;
3030                 case LPFC_TRAILER_CODE_DCBX:
3031                         lpfc_sli4_async_dcbx_evt(phba,
3032                                                  &cq_event->cqe.acqe_dcbx);
3033                         break;
3034                 default:
3035                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3036                                         "1804 Invalid asynchrous event code: "
3037                                         "x%x\n", bf_get(lpfc_trailer_code,
3038                                         &cq_event->cqe.mcqe_cmpl));
3039                         break;
3040                 }
3041                 /* Free the completion event processed to the free pool */
3042                 lpfc_sli4_cq_event_release(phba, cq_event);
3043         }
3044 }
3045
3046 /**
3047  * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
3048  * @phba: pointer to lpfc hba data structure.
3049  * @dev_grp: The HBA PCI-Device group number.
3050  *
3051  * This routine is invoked to set up the per HBA PCI-Device group function
3052  * API jump table entries.
3053  *
3054  * Return: 0 if success, otherwise -ENODEV
3055  **/
3056 int
3057 lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
3058 {
3059         int rc;
3060
3061         /* Set up lpfc PCI-device group */
3062         phba->pci_dev_grp = dev_grp;
3063
3064         /* The LPFC_PCI_DEV_OC uses SLI4 */
3065         if (dev_grp == LPFC_PCI_DEV_OC)
3066                 phba->sli_rev = LPFC_SLI_REV4;
3067
3068         /* Set up device INIT API function jump table */
3069         rc = lpfc_init_api_table_setup(phba, dev_grp);
3070         if (rc)
3071                 return -ENODEV;
3072         /* Set up SCSI API function jump table */
3073         rc = lpfc_scsi_api_table_setup(phba, dev_grp);
3074         if (rc)
3075                 return -ENODEV;
3076         /* Set up SLI API function jump table */
3077         rc = lpfc_sli_api_table_setup(phba, dev_grp);
3078         if (rc)
3079                 return -ENODEV;
3080         /* Set up MBOX API function jump table */
3081         rc = lpfc_mbox_api_table_setup(phba, dev_grp);
3082         if (rc)
3083                 return -ENODEV;
3084
3085         return 0;
3086 }
3087
3088 /**
3089  * lpfc_log_intr_mode - Log the active interrupt mode
3090  * @phba: pointer to lpfc hba data structure.
3091  * @intr_mode: active interrupt mode adopted.
3092  *
3093  * This routine it invoked to log the currently used active interrupt mode
3094  * to the device.
3095  **/
3096 static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
3097 {
3098         switch (intr_mode) {
3099         case 0:
3100                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3101                                 "0470 Enable INTx interrupt mode.\n");
3102                 break;
3103         case 1:
3104                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3105                                 "0481 Enabled MSI interrupt mode.\n");
3106                 break;
3107         case 2:
3108                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
3109                                 "0480 Enabled MSI-X interrupt mode.\n");
3110                 break;
3111         default:
3112                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3113                                 "0482 Illegal interrupt mode.\n");
3114                 break;
3115         }
3116         return;
3117 }
3118
3119 /**
3120  * lpfc_enable_pci_dev - Enable a generic PCI device.
3121  * @phba: pointer to lpfc hba data structure.
3122  *
3123  * This routine is invoked to enable the PCI device that is common to all
3124  * PCI devices.
3125  *
3126  * Return codes
3127  *      0 - successful
3128  *      other values - error
3129  **/
3130 static int
3131 lpfc_enable_pci_dev(struct lpfc_hba *phba)
3132 {
3133         struct pci_dev *pdev;
3134         int bars;
3135
3136         /* Obtain PCI device reference */
3137         if (!phba->pcidev)
3138                 goto out_error;
3139         else
3140                 pdev = phba->pcidev;
3141         /* Select PCI BARs */
3142         bars = pci_select_bars(pdev, IORESOURCE_MEM);
3143         /* Enable PCI device */
3144         if (pci_enable_device_mem(pdev))
3145                 goto out_error;
3146         /* Request PCI resource for the device */
3147         if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
3148                 goto out_disable_device;
3149         /* Set up device as PCI master and save state for EEH */
3150         pci_set_master(pdev);
3151         pci_try_set_mwi(pdev);
3152         pci_save_state(pdev);
3153
3154         return 0;
3155
3156 out_disable_device:
3157         pci_disable_device(pdev);
3158 out_error:
3159         return -ENODEV;
3160 }
3161
3162 /**
3163  * lpfc_disable_pci_dev - Disable a generic PCI device.
3164  * @phba: pointer to lpfc hba data structure.
3165  *
3166  * This routine is invoked to disable the PCI device that is common to all
3167  * PCI devices.
3168  **/
3169 static void
3170 lpfc_disable_pci_dev(struct lpfc_hba *phba)
3171 {
3172         struct pci_dev *pdev;
3173         int bars;
3174
3175         /* Obtain PCI device reference */
3176         if (!phba->pcidev)
3177                 return;
3178         else
3179                 pdev = phba->pcidev;
3180         /* Select PCI BARs */
3181         bars = pci_select_bars(pdev, IORESOURCE_MEM);
3182         /* Release PCI resource and disable PCI device */
3183         pci_release_selected_regions(pdev, bars);
3184         pci_disable_device(pdev);
3185         /* Null out PCI private reference to driver */
3186         pci_set_drvdata(pdev, NULL);
3187
3188         return;
3189 }
3190
3191 /**
3192  * lpfc_reset_hba - Reset a hba
3193  * @phba: pointer to lpfc hba data structure.
3194  *
3195  * This routine is invoked to reset a hba device. It brings the HBA
3196  * offline, performs a board restart, and then brings the board back
3197  * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
3198  * on outstanding mailbox commands.
3199  **/
3200 void
3201 lpfc_reset_hba(struct lpfc_hba *phba)
3202 {
3203         /* If resets are disabled then set error state and return. */
3204         if (!phba->cfg_enable_hba_reset) {
3205                 phba->link_state = LPFC_HBA_ERROR;
3206                 return;
3207         }
3208         lpfc_offline_prep(phba);
3209         lpfc_offline(phba);
3210         lpfc_sli_brdrestart(phba);
3211         lpfc_online(phba);
3212         lpfc_unblock_mgmt_io(phba);
3213 }
3214
3215 /**
3216  * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
3217  * @phba: pointer to lpfc hba data structure.
3218  *
3219  * This routine is invoked to set up the driver internal resources specific to
3220  * support the SLI-3 HBA device it attached to.
3221  *
3222  * Return codes
3223  *      0 - successful
3224  *      other values - error
3225  **/
3226 static int
3227 lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
3228 {
3229         struct lpfc_sli *psli;
3230
3231         /*
3232          * Initialize timers used by driver
3233          */
3234
3235         /* Heartbeat timer */
3236         init_timer(&phba->hb_tmofunc);
3237         phba->hb_tmofunc.function = lpfc_hb_timeout;
3238         phba->hb_tmofunc.data = (unsigned long)phba;
3239
3240         psli = &phba->sli;
3241         /* MBOX heartbeat timer */
3242         init_timer(&psli->mbox_tmo);
3243         psli->mbox_tmo.function = lpfc_mbox_timeout;
3244         psli->mbox_tmo.data = (unsigned long) phba;
3245         /* FCP polling mode timer */
3246         init_timer(&phba->fcp_poll_timer);
3247         phba->fcp_poll_timer.function = lpfc_poll_timeout;
3248         phba->fcp_poll_timer.data = (unsigned long) phba;
3249         /* Fabric block timer */
3250         init_timer(&phba->fabric_block_timer);
3251         phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
3252         phba->fabric_block_timer.data = (unsigned long) phba;
3253         /* EA polling mode timer */
3254         init_timer(&phba->eratt_poll);
3255         phba->eratt_poll.function = lpfc_poll_eratt;
3256         phba->eratt_poll.data = (unsigned long) phba;
3257
3258         /* Host attention work mask setup */
3259         phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
3260         phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
3261
3262         /* Get all the module params for configuring this host */
3263         lpfc_get_cfgparam(phba);
3264         /*
3265          * Since the sg_tablesize is module parameter, the sg_dma_buf_size
3266          * used to create the sg_dma_buf_pool must be dynamically calculated.
3267          * 2 segments are added since the IOCB needs a command and response bde.
3268          */
3269         phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
3270                 sizeof(struct fcp_rsp) +
3271                         ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
3272
3273         if (phba->cfg_enable_bg) {
3274                 phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
3275                 phba->cfg_sg_dma_buf_size +=
3276                         phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
3277         }
3278
3279         /* Also reinitialize the host templates with new values. */
3280         lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
3281         lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
3282
3283         phba->max_vpi = LPFC_MAX_VPI;
3284         /* This will be set to correct value after config_port mbox */
3285         phba->max_vports = 0;
3286
3287         /*
3288          * Initialize the SLI Layer to run with lpfc HBAs.
3289          */
3290         lpfc_sli_setup(phba);
3291         lpfc_sli_queue_setup(phba);
3292
3293         /* Allocate device driver memory */
3294         if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
3295                 return -ENOMEM;
3296
3297         return 0;
3298 }
3299
3300 /**
3301  * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
3302  * @phba: pointer to lpfc hba data structure.
3303  *
3304  * This routine is invoked to unset the driver internal resources set up
3305  * specific for supporting the SLI-3 HBA device it attached to.
3306  **/
3307 static void
3308 lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
3309 {
3310         /* Free device driver memory allocated */
3311         lpfc_mem_free_all(phba);
3312
3313         return;
3314 }
3315
3316 /**
3317  * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
3318  * @phba: pointer to lpfc hba data structure.
3319  *
3320  * This routine is invoked to set up the driver internal resources specific to
3321  * support the SLI-4 HBA device it attached to.
3322  *
3323  * Return codes
3324  *      0 - successful
3325  *      other values - error
3326  **/
3327 static int
3328 lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
3329 {
3330         struct lpfc_sli *psli;
3331         int rc;
3332         int i, hbq_count;
3333
3334         /* Before proceed, wait for POST done and device ready */
3335         rc = lpfc_sli4_post_status_check(phba);
3336         if (rc)
3337                 return -ENODEV;
3338
3339         /*
3340          * Initialize timers used by driver
3341          */
3342
3343         /* Heartbeat timer */
3344         init_timer(&phba->hb_tmofunc);
3345         phba->hb_tmofunc.function = lpfc_hb_timeout;
3346         phba->hb_tmofunc.data = (unsigned long)phba;
3347
3348         psli = &phba->sli;
3349         /* MBOX heartbeat timer */
3350         init_timer(&psli->mbox_tmo);
3351         psli->mbox_tmo.function = lpfc_mbox_timeout;
3352         psli->mbox_tmo.data = (unsigned long) phba;
3353         /* Fabric block timer */
3354         init_timer(&phba->fabric_block_timer);
3355         phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
3356         phba->fabric_block_timer.data = (unsigned long) phba;
3357         /* EA polling mode timer */
3358         init_timer(&phba->eratt_poll);
3359         phba->eratt_poll.function = lpfc_poll_eratt;
3360         phba->eratt_poll.data = (unsigned long) phba;
3361         /*
3362          * We need to do a READ_CONFIG mailbox command here before
3363          * calling lpfc_get_cfgparam. For VFs this will report the
3364          * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
3365          * All of the resources allocated
3366          * for this Port are tied to these values.
3367          */
3368         /* Get all the module params for configuring this host */
3369         lpfc_get_cfgparam(phba);
3370         phba->max_vpi = LPFC_MAX_VPI;
3371         /* This will be set to correct value after the read_config mbox */
3372         phba->max_vports = 0;
3373
3374         /* Program the default value of vlan_id and fc_map */
3375         phba->valid_vlan = 0;
3376         phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
3377         phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
3378         phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
3379
3380         /*
3381          * Since the sg_tablesize is module parameter, the sg_dma_buf_size
3382          * used to create the sg_dma_buf_pool must be dynamically calculated.
3383          * 2 segments are added since the IOCB needs a command and response bde.
3384          * To insure that the scsi sgl does not cross a 4k page boundary only
3385          * sgl sizes of 1k, 2k, 4k, and 8k are supported.
3386          * Table of sgl sizes and seg_cnt:
3387          * sgl size,    sg_seg_cnt      total seg
3388          * 1k           50              52
3389          * 2k           114             116
3390          * 4k           242             244
3391          * 8k           498             500
3392          * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
3393          * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
3394          * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
3395          * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
3396          */
3397         if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
3398                 phba->cfg_sg_seg_cnt = 50;
3399         else if (phba->cfg_sg_seg_cnt <= 114)
3400                 phba->cfg_sg_seg_cnt = 114;
3401         else if (phba->cfg_sg_seg_cnt <= 242)
3402                 phba->cfg_sg_seg_cnt = 242;
3403         else
3404                 phba->cfg_sg_seg_cnt = 498;
3405
3406         phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
3407                                         + sizeof(struct fcp_rsp);
3408         phba->cfg_sg_dma_buf_size +=
3409                 ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
3410
3411         /* Initialize buffer queue management fields */
3412         hbq_count = lpfc_sli_hbq_count();
3413         for (i = 0; i < hbq_count; ++i)
3414                 INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
3415         INIT_LIST_HEAD(&phba->rb_pend_list);
3416         phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
3417         phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
3418
3419         /*
3420          * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
3421          */
3422         /* Initialize the Abort scsi buffer list used by driver */
3423         spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
3424         INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
3425         /* This abort list used by worker thread */
3426         spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
3427
3428         /*
3429          * Initialize dirver internal slow-path work queues
3430          */
3431
3432         /* Driver internel slow-path CQ Event pool */
3433         INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
3434         /* Response IOCB work queue list */
3435         INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
3436         /* Asynchronous event CQ Event work queue list */
3437         INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
3438         /* Fast-path XRI aborted CQ Event work queue list */
3439         INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
3440         /* Slow-path XRI aborted CQ Event work queue list */
3441         INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
3442         /* Receive queue CQ Event work queue list */
3443         INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
3444
3445         /* Initialize the driver internal SLI layer lists. */
3446         lpfc_sli_setup(phba);
3447         lpfc_sli_queue_setup(phba);
3448
3449         /* Allocate device driver memory */
3450         rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
3451         if (rc)
3452                 return -ENOMEM;
3453
3454         /* Create the bootstrap mailbox command */
3455         rc = lpfc_create_bootstrap_mbox(phba);
3456         if (unlikely(rc))
3457                 goto out_free_mem;
3458
3459         /* Set up the host's endian order with the device. */
3460         rc = lpfc_setup_endian_order(phba);
3461         if (unlikely(rc))
3462                 goto out_free_bsmbx;
3463
3464         /* Set up the hba's configuration parameters. */
3465         rc = lpfc_sli4_read_config(phba);
3466         if (unlikely(rc))
3467                 goto out_free_bsmbx;
3468
3469         /* Perform a function reset */
3470         rc = lpfc_pci_function_reset(phba);
3471         if (unlikely(rc))
3472                 goto out_free_bsmbx;
3473
3474         /* Create all the SLI4 queues */
3475         rc = lpfc_sli4_queue_create(phba);
3476         if (rc)
3477                 goto out_free_bsmbx;
3478
3479         /* Create driver internal CQE event pool */
3480         rc = lpfc_sli4_cq_event_pool_create(phba);
3481         if (rc)
3482                 goto out_destroy_queue;
3483
3484         /* Initialize and populate the iocb list per host */
3485         rc = lpfc_init_sgl_list(phba);
3486         if (rc) {
3487                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3488                                 "1400 Failed to initialize sgl list.\n");
3489                 goto out_destroy_cq_event_pool;
3490         }
3491         rc = lpfc_init_active_sgl_array(phba);
3492         if (rc) {
3493                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3494                                 "1430 Failed to initialize sgl list.\n");
3495                 goto out_free_sgl_list;
3496         }
3497
3498         rc = lpfc_sli4_init_rpi_hdrs(phba);
3499         if (rc) {
3500                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3501                                 "1432 Failed to initialize rpi headers.\n");
3502                 goto out_free_active_sgl;
3503         }
3504
3505         phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
3506                                     phba->cfg_fcp_eq_count), GFP_KERNEL);
3507         if (!phba->sli4_hba.fcp_eq_hdl) {
3508                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3509                                 "2572 Failed allocate memory for fast-path "
3510                                 "per-EQ handle array\n");
3511                 goto out_remove_rpi_hdrs;
3512         }
3513
3514         phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
3515                                       phba->sli4_hba.cfg_eqn), GFP_KERNEL);
3516         if (!phba->sli4_hba.msix_entries) {
3517                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3518                                 "2573 Failed allocate memory for msi-x "
3519                                 "interrupt vector entries\n");
3520                 goto out_free_fcp_eq_hdl;
3521         }
3522
3523         return rc;
3524
3525 out_free_fcp_eq_hdl:
3526         kfree(phba->sli4_hba.fcp_eq_hdl);
3527 out_remove_rpi_hdrs:
3528         lpfc_sli4_remove_rpi_hdrs(phba);
3529 out_free_active_sgl:
3530         lpfc_free_active_sgl(phba);
3531 out_free_sgl_list:
3532         lpfc_free_sgl_list(phba);
3533 out_destroy_cq_event_pool:
3534         lpfc_sli4_cq_event_pool_destroy(phba);
3535 out_destroy_queue:
3536         lpfc_sli4_queue_destroy(phba);
3537 out_free_bsmbx:
3538         lpfc_destroy_bootstrap_mbox(phba);
3539 out_free_mem:
3540         lpfc_mem_free(phba);
3541         return rc;
3542 }
3543
3544 /**
3545  * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
3546  * @phba: pointer to lpfc hba data structure.
3547  *
3548  * This routine is invoked to unset the driver internal resources set up
3549  * specific for supporting the SLI-4 HBA device it attached to.
3550  **/
3551 static void
3552 lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
3553 {
3554         struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
3555
3556         /* unregister default FCFI from the HBA */
3557         lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
3558
3559         /* Free the default FCR table */
3560         lpfc_sli_remove_dflt_fcf(phba);
3561
3562         /* Free memory allocated for msi-x interrupt vector entries */
3563         kfree(phba->sli4_hba.msix_entries);
3564
3565         /* Free memory allocated for fast-path work queue handles */
3566         kfree(phba->sli4_hba.fcp_eq_hdl);
3567
3568         /* Free the allocated rpi headers. */
3569         lpfc_sli4_remove_rpi_hdrs(phba);
3570         lpfc_sli4_remove_rpis(phba);
3571
3572         /* Free the ELS sgl list */
3573         lpfc_free_active_sgl(phba);
3574         lpfc_free_sgl_list(phba);
3575
3576         /* Free the SCSI sgl management array */
3577         kfree(phba->sli4_hba.lpfc_scsi_psb_array);
3578
3579         /* Free the SLI4 queues */
3580         lpfc_sli4_queue_destroy(phba);
3581
3582         /* Free the completion queue EQ event pool */
3583         lpfc_sli4_cq_event_release_all(phba);
3584         lpfc_sli4_cq_event_pool_destroy(phba);
3585
3586         /* Reset SLI4 HBA FCoE function */
3587         lpfc_pci_function_reset(phba);
3588
3589         /* Free the bsmbx region. */
3590         lpfc_destroy_bootstrap_mbox(phba);
3591
3592         /* Free the SLI Layer memory with SLI4 HBAs */
3593         lpfc_mem_free_all(phba);
3594
3595         /* Free the current connect table */
3596         list_for_each_entry_safe(conn_entry, next_conn_entry,
3597                 &phba->fcf_conn_rec_list, list)
3598                 kfree(conn_entry);
3599
3600         return;
3601 }
3602
3603 /**
3604  * lpfc_init_api_table_setup - Set up init api fucntion jump table
3605  * @phba: The hba struct for which this call is being executed.
3606  * @dev_grp: The HBA PCI-Device group number.
3607  *
3608  * This routine sets up the device INIT interface API function jump table
3609  * in @phba struct.
3610  *
3611  * Returns: 0 - success, -ENODEV - failure.
3612  **/
3613 int
3614 lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
3615 {
3616         switch (dev_grp) {
3617         case LPFC_PCI_DEV_LP:
3618                 phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
3619                 phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
3620                 phba->lpfc_stop_port = lpfc_stop_port_s3;
3621                 break;
3622         case LPFC_PCI_DEV_OC:
3623                 phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
3624                 phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
3625                 phba->lpfc_stop_port = lpfc_stop_port_s4;
3626                 break;
3627         default:
3628                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3629                                 "1431 Invalid HBA PCI-device group: 0x%x\n",
3630                                 dev_grp);
3631                 return -ENODEV;
3632                 break;
3633         }
3634         return 0;
3635 }
3636
3637 /**
3638  * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
3639  * @phba: pointer to lpfc hba data structure.
3640  *
3641  * This routine is invoked to set up the driver internal resources before the
3642  * device specific resource setup to support the HBA device it attached to.
3643  *
3644  * Return codes
3645  *      0 - successful
3646  *      other values - error
3647  **/
3648 static int
3649 lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
3650 {
3651         /*
3652          * Driver resources common to all SLI revisions
3653          */
3654         atomic_set(&phba->fast_event_count, 0);
3655         spin_lock_init(&phba->hbalock);
3656
3657         /* Initialize ndlp management spinlock */
3658         spin_lock_init(&phba->ndlp_lock);
3659
3660         INIT_LIST_HEAD(&phba->port_list);
3661         INIT_LIST_HEAD(&phba->work_list);
3662         init_waitqueue_head(&phba->wait_4_mlo_m_q);
3663
3664         /* Initialize the wait queue head for the kernel thread */
3665         init_waitqueue_head(&phba->work_waitq);
3666
3667         /* Initialize the scsi buffer list used by driver for scsi IO */
3668         spin_lock_init(&phba->scsi_buf_list_lock);
3669         INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
3670
3671         /* Initialize the fabric iocb list */
3672         INIT_LIST_HEAD(&phba->fabric_iocb_list);
3673
3674         /* Initialize list to save ELS buffers */
3675         INIT_LIST_HEAD(&phba->elsbuf);
3676
3677         /* Initialize FCF connection rec list */
3678         INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
3679
3680         return 0;
3681 }
3682
3683 /**
3684  * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
3685  * @phba: pointer to lpfc hba data structure.
3686  *
3687  * This routine is invoked to set up the driver internal resources after the
3688  * device specific resource setup to support the HBA device it attached to.
3689  *
3690  * Return codes
3691  *      0 - successful
3692  *      other values - error
3693  **/
3694 static int
3695 lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
3696 {
3697         int error;
3698
3699         /* Startup the kernel thread for this host adapter. */
3700         phba->worker_thread = kthread_run(lpfc_do_work, phba,
3701                                           "lpfc_worker_%d", phba->brd_no);
3702         if (IS_ERR(phba->worker_thread)) {
3703                 error = PTR_ERR(phba->worker_thread);
3704                 return error;
3705         }
3706
3707         return 0;
3708 }
3709
3710 /**
3711  * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
3712  * @phba: pointer to lpfc hba data structure.
3713  *
3714  * This routine is invoked to unset the driver internal resources set up after
3715  * the device specific resource setup for supporting the HBA device it
3716  * attached to.
3717  **/
3718 static void
3719 lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
3720 {
3721         /* Stop kernel worker thread */
3722         kthread_stop(phba->worker_thread);
3723 }
3724
3725 /**
3726  * lpfc_free_iocb_list - Free iocb list.
3727  * @phba: pointer to lpfc hba data structure.
3728  *
3729  * This routine is invoked to free the driver's IOCB list and memory.
3730  **/
3731 static void
3732 lpfc_free_iocb_list(struct lpfc_hba *phba)
3733 {
3734         struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
3735
3736         spin_lock_irq(&phba->hbalock);
3737         list_for_each_entry_safe(iocbq_entry, iocbq_next,
3738                                  &phba->lpfc_iocb_list, list) {
3739                 list_del(&iocbq_entry->list);
3740                 kfree(iocbq_entry);
3741                 phba->total_iocbq_bufs--;
3742         }
3743         spin_unlock_irq(&phba->hbalock);
3744
3745         return;
3746 }
3747
3748 /**
3749  * lpfc_init_iocb_list - Allocate and initialize iocb list.
3750  * @phba: pointer to lpfc hba data structure.
3751  *
3752  * This routine is invoked to allocate and initizlize the driver's IOCB
3753  * list and set up the IOCB tag array accordingly.
3754  *
3755  * Return codes
3756  *      0 - successful
3757  *      other values - error
3758  **/
3759 static int
3760 lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
3761 {
3762         struct lpfc_iocbq *iocbq_entry = NULL;
3763         uint16_t iotag;
3764         int i;
3765
3766         /* Initialize and populate the iocb list per host.  */
3767         INIT_LIST_HEAD(&phba->lpfc_iocb_list);
3768         for (i = 0; i < iocb_count; i++) {
3769                 iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
3770                 if (iocbq_entry == NULL) {
3771                         printk(KERN_ERR "%s: only allocated %d iocbs of "
3772                                 "expected %d count. Unloading driver.\n",
3773                                 __func__, i, LPFC_IOCB_LIST_CNT);
3774                         goto out_free_iocbq;
3775                 }
3776
3777                 iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
3778                 if (iotag == 0) {
3779                         kfree(iocbq_entry);
3780                         printk(KERN_ERR "%s: failed to allocate IOTAG. "
3781                                 "Unloading driver.\n", __func__);
3782                         goto out_free_iocbq;
3783                 }
3784                 iocbq_entry->sli4_xritag = NO_XRI;
3785
3786                 spin_lock_irq(&phba->hbalock);
3787                 list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
3788                 phba->total_iocbq_bufs++;
3789                 spin_unlock_irq(&phba->hbalock);
3790         }
3791
3792         return 0;
3793
3794 out_free_iocbq:
3795         lpfc_free_iocb_list(phba);
3796
3797         return -ENOMEM;
3798 }
3799
3800 /**
3801  * lpfc_free_sgl_list - Free sgl list.
3802  * @phba: pointer to lpfc hba data structure.
3803  *
3804  * This routine is invoked to free the driver's sgl list and memory.
3805  **/
3806 static void
3807 lpfc_free_sgl_list(struct lpfc_hba *phba)
3808 {
3809         struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
3810         LIST_HEAD(sglq_list);
3811         int rc = 0;
3812
3813         spin_lock_irq(&phba->hbalock);
3814         list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
3815         spin_unlock_irq(&phba->hbalock);
3816
3817         list_for_each_entry_safe(sglq_entry, sglq_next,
3818                                  &sglq_list, list) {
3819                 list_del(&sglq_entry->list);
3820                 lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
3821                 kfree(sglq_entry);
3822                 phba->sli4_hba.total_sglq_bufs--;
3823         }
3824         rc = lpfc_sli4_remove_all_sgl_pages(phba);
3825         if (rc) {
3826                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3827                         "2005 Unable to deregister pages from HBA: %x", rc);
3828         }
3829         kfree(phba->sli4_hba.lpfc_els_sgl_array);
3830 }
3831
3832 /**
3833  * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
3834  * @phba: pointer to lpfc hba data structure.
3835  *
3836  * This routine is invoked to allocate the driver's active sgl memory.
3837  * This array will hold the sglq_entry's for active IOs.
3838  **/
3839 static int
3840 lpfc_init_active_sgl_array(struct lpfc_hba *phba)
3841 {
3842         int size;
3843         size = sizeof(struct lpfc_sglq *);
3844         size *= phba->sli4_hba.max_cfg_param.max_xri;
3845
3846         phba->sli4_hba.lpfc_sglq_active_list =
3847                 kzalloc(size, GFP_KERNEL);
3848         if (!phba->sli4_hba.lpfc_sglq_active_list)
3849                 return -ENOMEM;
3850         return 0;
3851 }
3852
3853 /**
3854  * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
3855  * @phba: pointer to lpfc hba data structure.
3856  *
3857  * This routine is invoked to walk through the array of active sglq entries
3858  * and free all of the resources.
3859  * This is just a place holder for now.
3860  **/
3861 static void
3862 lpfc_free_active_sgl(struct lpfc_hba *phba)
3863 {
3864         kfree(phba->sli4_hba.lpfc_sglq_active_list);
3865 }
3866
3867 /**
3868  * lpfc_init_sgl_list - Allocate and initialize sgl list.
3869  * @phba: pointer to lpfc hba data structure.
3870  *
3871  * This routine is invoked to allocate and initizlize the driver's sgl
3872  * list and set up the sgl xritag tag array accordingly.
3873  *
3874  * Return codes
3875  *      0 - successful
3876  *      other values - error
3877  **/
3878 static int
3879 lpfc_init_sgl_list(struct lpfc_hba *phba)
3880 {
3881         struct lpfc_sglq *sglq_entry = NULL;
3882         int i;
3883         int els_xri_cnt;
3884
3885         els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
3886         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3887                                 "2400 lpfc_init_sgl_list els %d.\n",
3888                                 els_xri_cnt);
3889         /* Initialize and populate the sglq list per host/VF. */
3890         INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
3891         INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
3892
3893         /* Sanity check on XRI management */
3894         if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
3895                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3896                                 "2562 No room left for SCSI XRI allocation: "
3897                                 "max_xri=%d, els_xri=%d\n",
3898                                 phba->sli4_hba.max_cfg_param.max_xri,
3899                                 els_xri_cnt);
3900                 return -ENOMEM;
3901         }
3902
3903         /* Allocate memory for the ELS XRI management array */
3904         phba->sli4_hba.lpfc_els_sgl_array =
3905                         kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
3906                         GFP_KERNEL);
3907
3908         if (!phba->sli4_hba.lpfc_els_sgl_array) {
3909                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3910                                 "2401 Failed to allocate memory for ELS "
3911                                 "XRI management array of size %d.\n",
3912                                 els_xri_cnt);
3913                 return -ENOMEM;
3914         }
3915
3916         /* Keep the SCSI XRI into the XRI management array */
3917         phba->sli4_hba.scsi_xri_max =
3918                         phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
3919         phba->sli4_hba.scsi_xri_cnt = 0;
3920
3921         phba->sli4_hba.lpfc_scsi_psb_array =
3922                         kzalloc((sizeof(struct lpfc_scsi_buf *) *
3923                         phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
3924
3925         if (!phba->sli4_hba.lpfc_scsi_psb_array) {
3926                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3927                                 "2563 Failed to allocate memory for SCSI "
3928                                 "XRI management array of size %d.\n",
3929                                 phba->sli4_hba.scsi_xri_max);
3930                 kfree(phba->sli4_hba.lpfc_els_sgl_array);
3931                 return -ENOMEM;
3932         }
3933
3934         for (i = 0; i < els_xri_cnt; i++) {
3935                 sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
3936                 if (sglq_entry == NULL) {
3937                         printk(KERN_ERR "%s: only allocated %d sgls of "
3938                                 "expected %d count. Unloading driver.\n",
3939                                 __func__, i, els_xri_cnt);
3940                         goto out_free_mem;
3941                 }
3942
3943                 sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
3944                 if (sglq_entry->sli4_xritag == NO_XRI) {
3945                         kfree(sglq_entry);
3946                         printk(KERN_ERR "%s: failed to allocate XRI.\n"
3947                                 "Unloading driver.\n", __func__);
3948                         goto out_free_mem;
3949                 }
3950                 sglq_entry->buff_type = GEN_BUFF_TYPE;
3951                 sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
3952                 if (sglq_entry->virt == NULL) {
3953                         kfree(sglq_entry);
3954                         printk(KERN_ERR "%s: failed to allocate mbuf.\n"
3955                                 "Unloading driver.\n", __func__);
3956                         goto out_free_mem;
3957                 }
3958                 sglq_entry->sgl = sglq_entry->virt;
3959                 memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
3960
3961                 /* The list order is used by later block SGL registraton */
3962                 spin_lock_irq(&phba->hbalock);
3963                 list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
3964                 phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
3965                 phba->sli4_hba.total_sglq_bufs++;
3966                 spin_unlock_irq(&phba->hbalock);
3967         }
3968         return 0;
3969
3970 out_free_mem:
3971         kfree(phba->sli4_hba.lpfc_scsi_psb_array);
3972         lpfc_free_sgl_list(phba);
3973         return -ENOMEM;
3974 }
3975
3976 /**
3977  * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
3978  * @phba: pointer to lpfc hba data structure.
3979  *
3980  * This routine is invoked to post rpi header templates to the
3981  * HBA consistent with the SLI-4 interface spec.  This routine
3982  * posts a PAGE_SIZE memory region to the port to hold up to
3983  * PAGE_SIZE modulo 64 rpi context headers.
3984  * No locks are held here because this is an initialization routine
3985  * called only from probe or lpfc_online when interrupts are not
3986  * enabled and the driver is reinitializing the device.
3987  *
3988  * Return codes
3989  *      0 - successful
3990  *      ENOMEM - No availble memory
3991  *      EIO - The mailbox failed to complete successfully.
3992  **/
3993 int
3994 lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
3995 {
3996         int rc = 0;
3997         int longs;
3998         uint16_t rpi_count;
3999         struct lpfc_rpi_hdr *rpi_hdr;
4000
4001         INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
4002
4003         /*
4004          * Provision an rpi bitmask range for discovery. The total count
4005          * is the difference between max and base + 1.
4006          */
4007         rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
4008                     phba->sli4_hba.max_cfg_param.max_rpi - 1;
4009
4010         longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
4011         phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
4012                                            GFP_KERNEL);
4013         if (!phba->sli4_hba.rpi_bmask)
4014                 return -ENOMEM;
4015
4016         rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
4017         if (!rpi_hdr) {
4018                 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
4019                                 "0391 Error during rpi post operation\n");
4020                 lpfc_sli4_remove_rpis(phba);
4021                 rc = -ENODEV;
4022         }
4023
4024         return rc;
4025 }
4026
4027 /**
4028  * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
4029  * @phba: pointer to lpfc hba data structure.
4030  *
4031  * This routine is invoked to allocate a single 4KB memory region to
4032  * support rpis and stores them in the phba.  This single region
4033  * provides support for up to 64 rpis.  The region is used globally
4034  * by the device.
4035  *
4036  * Returns:
4037  *   A valid rpi hdr on success.
4038  *   A NULL pointer on any failure.
4039  **/
4040 struct lpfc_rpi_hdr *
4041 lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
4042 {
4043         uint16_t rpi_limit, curr_rpi_range;
4044         struct lpfc_dmabuf *dmabuf;
4045         struct lpfc_rpi_hdr *rpi_hdr;
4046
4047         rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
4048                     phba->sli4_hba.max_cfg_param.max_rpi - 1;
4049
4050         spin_lock_irq(&phba->hbalock);
4051         curr_rpi_range = phba->sli4_hba.next_rpi;
4052         spin_unlock_irq(&phba->hbalock);
4053
4054         /*
4055          * The port has a limited number of rpis. The increment here
4056          * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
4057          * and to allow the full max_rpi range per port.
4058          */
4059         if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
4060                 return NULL;
4061
4062         /*
4063          * First allocate the protocol header region for the port.  The
4064          * port expects a 4KB DMA-mapped memory region that is 4K aligned.
4065          */
4066         dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
4067         if (!dmabuf)
4068                 return NULL;
4069
4070         dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
4071                                           LPFC_HDR_TEMPLATE_SIZE,
4072                                           &dmabuf->phys,
4073                                           GFP_KERNEL);
4074         if (!dmabuf->virt) {
4075                 rpi_hdr = NULL;
4076                 goto err_free_dmabuf;
4077         }
4078
4079         memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
4080         if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
4081                 rpi_hdr = NULL;
4082                 goto err_free_coherent;
4083         }
4084
4085         /* Save the rpi header data for cleanup later. */
4086         rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
4087         if (!rpi_hdr)
4088                 goto err_free_coherent;
4089
4090         rpi_hdr->dmabuf = dmabuf;
4091         rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
4092         rpi_hdr->page_count = 1;
4093         spin_lock_irq(&phba->hbalock);
4094         rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
4095         list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
4096
4097         /*
4098          * The next_rpi stores the next module-64 rpi value to post
4099          * in any subsequent rpi memory region postings.
4100          */
4101         phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
4102         spin_unlock_irq(&phba->hbalock);
4103         return rpi_hdr;
4104
4105  err_free_coherent:
4106         dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
4107                           dmabuf->virt, dmabuf->phys);
4108  err_free_dmabuf:
4109         kfree(dmabuf);
4110         return NULL;
4111 }
4112
4113 /**
4114  * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
4115  * @phba: pointer to lpfc hba data structure.
4116  *
4117  * This routine is invoked to remove all memory resources allocated
4118  * to support rpis. This routine presumes the caller has released all
4119  * rpis consumed by fabric or port logins and is prepared to have
4120  * the header pages removed.
4121  **/
4122 void
4123 lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
4124 {
4125         struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
4126
4127         list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
4128                                  &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
4129                 list_del(&rpi_hdr->list);
4130                 dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
4131                                   rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
4132                 kfree(rpi_hdr->dmabuf);
4133                 kfree(rpi_hdr);
4134         }
4135
4136         phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
4137         memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
4138 }
4139
4140 /**
4141  * lpfc_hba_alloc - Allocate driver hba data structure for a device.
4142  * @pdev: pointer to pci device data structure.
4143  *
4144  * This routine is invoked to allocate the driver hba data structure for an
4145  * HBA device. If the allocation is successful, the phba reference to the
4146  * PCI device data structure is set.
4147  *
4148  * Return codes
4149  *      pointer to @phba - successful
4150  *      NULL - error
4151  **/
4152 static struct lpfc_hba *
4153 lpfc_hba_alloc(struct pci_dev *pdev)
4154 {
4155         struct lpfc_hba *phba;
4156
4157         /* Allocate memory for HBA structure */
4158         phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
4159         if (!phba) {
4160                 dev_err(&pdev->dev, "failed to allocate hba struct\n");
4161                 return NULL;
4162         }
4163
4164         /* Set reference to PCI device in HBA structure */
4165         phba->pcidev = pdev;
4166
4167         /* Assign an unused board number */
4168         phba->brd_no = lpfc_get_instance();
4169         if (phba->brd_no < 0) {
4170                 kfree(phba);
4171                 return NULL;
4172         }
4173
4174         mutex_init(&phba->ct_event_mutex);
4175         INIT_LIST_HEAD(&phba->ct_ev_waiters);
4176
4177         return phba;
4178 }
4179
4180 /**
4181  * lpfc_hba_free - Free driver hba data structure with a device.
4182  * @phba: pointer to lpfc hba data structure.
4183  *
4184  * This routine is invoked to free the driver hba data structure with an
4185  * HBA device.
4186  **/
4187 static void
4188 lpfc_hba_free(struct lpfc_hba *phba)
4189 {
4190         /* Release the driver assigned board number */
4191         idr_remove(&lpfc_hba_index, phba->brd_no);
4192
4193         kfree(phba);
4194         return;
4195 }
4196
4197 /**
4198  * lpfc_create_shost - Create hba physical port with associated scsi host.
4199  * @phba: pointer to lpfc hba data structure.
4200  *
4201  * This routine is invoked to create HBA physical port and associate a SCSI
4202  * host with it.
4203  *
4204  * Return codes
4205  *      0 - successful
4206  *      other values - error
4207  **/
4208 static int
4209 lpfc_create_shost(struct lpfc_hba *phba)
4210 {
4211         struct lpfc_vport *vport;
4212         struct Scsi_Host  *shost;
4213
4214         /* Initialize HBA FC structure */
4215         phba->fc_edtov = FF_DEF_EDTOV;
4216         phba->fc_ratov = FF_DEF_RATOV;
4217         phba->fc_altov = FF_DEF_ALTOV;
4218         phba->fc_arbtov = FF_DEF_ARBTOV;
4219
4220         vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
4221         if (!vport)
4222                 return -ENODEV;
4223
4224         shost = lpfc_shost_from_vport(vport);
4225         phba->pport = vport;
4226         lpfc_debugfs_initialize(vport);
4227         /* Put reference to SCSI host to driver's device private data */
4228         pci_set_drvdata(phba->pcidev, shost);
4229
4230         return 0;
4231 }
4232
4233 /**
4234  * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
4235  * @phba: pointer to lpfc hba data structure.
4236  *
4237  * This routine is invoked to destroy HBA physical port and the associated
4238  * SCSI host.
4239  **/
4240 static void
4241 lpfc_destroy_shost(struct lpfc_hba *phba)
4242 {
4243         struct lpfc_vport *vport = phba->pport;
4244
4245         /* Destroy physical port that associated with the SCSI host */
4246         destroy_port(vport);
4247
4248         return;
4249 }
4250
4251 /**
4252  * lpfc_setup_bg - Setup Block guard structures and debug areas.
4253  * @phba: pointer to lpfc hba data structure.
4254  * @shost: the shost to be used to detect Block guard settings.
4255  *
4256  * This routine sets up the local Block guard protocol settings for @shost.
4257  * This routine also allocates memory for debugging bg buffers.
4258  **/
4259 static void
4260 lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
4261 {
4262         int pagecnt = 10;
4263         if (lpfc_prot_mask && lpfc_prot_guard) {
4264                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
4265                                 "1478 Registering BlockGuard with the "
4266                                 "SCSI layer\n");
4267                 scsi_host_set_prot(shost, lpfc_prot_mask);
4268                 scsi_host_set_guard(shost, lpfc_prot_guard);
4269         }
4270         if (!_dump_buf_data) {
4271                 while (pagecnt) {
4272                         spin_lock_init(&_dump_buf_lock);
4273                         _dump_buf_data =
4274                                 (char *) __get_free_pages(GFP_KERNEL, pagecnt);
4275                         if (_dump_buf_data) {
4276                                 printk(KERN_ERR "BLKGRD allocated %d pages for "
4277                                        "_dump_buf_data at 0x%p\n",
4278                                        (1 << pagecnt), _dump_buf_data);
4279                                 _dump_buf_data_order = pagecnt;
4280                                 memset(_dump_buf_data, 0,
4281                                        ((1 << PAGE_SHIFT) << pagecnt));
4282                                 break;
4283                         } else
4284                                 --pagecnt;
4285                 }
4286                 if (!_dump_buf_data_order)
4287                         printk(KERN_ERR "BLKGRD ERROR unable to allocate "
4288                                "memory for hexdump\n");
4289         } else
4290                 printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
4291                        "\n", _dump_buf_data);
4292         if (!_dump_buf_dif) {
4293                 while (pagecnt) {
4294                         _dump_buf_dif =
4295                                 (char *) __get_free_pages(GFP_KERNEL, pagecnt);
4296                         if (_dump_buf_dif) {
4297                                 printk(KERN_ERR "BLKGRD allocated %d pages for "
4298                                        "_dump_buf_dif at 0x%p\n",
4299                                        (1 << pagecnt), _dump_buf_dif);
4300                                 _dump_buf_dif_order = pagecnt;
4301                                 memset(_dump_buf_dif, 0,
4302                                        ((1 << PAGE_SHIFT) << pagecnt));
4303                                 break;
4304                         } else
4305                                 --pagecnt;
4306                 }
4307                 if (!_dump_buf_dif_order)
4308                         printk(KERN_ERR "BLKGRD ERROR unable to allocate "
4309                                "memory for hexdump\n");
4310         } else
4311                 printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
4312                        _dump_buf_dif);
4313 }
4314
4315 /**
4316  * lpfc_post_init_setup - Perform necessary device post initialization setup.
4317  * @phba: pointer to lpfc hba data structure.
4318  *
4319  * This routine is invoked to perform all the necessary post initialization
4320  * setup for the device.
4321  **/
4322 static void
4323 lpfc_post_init_setup(struct lpfc_hba *phba)
4324 {
4325         struct Scsi_Host  *shost;
4326         struct lpfc_adapter_event_header adapter_event;
4327
4328         /* Get the default values for Model Name and Description */
4329         lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
4330
4331         /*
4332          * hba setup may have changed the hba_queue_depth so we need to
4333          * adjust the value of can_queue.
4334          */
4335         shost = pci_get_drvdata(phba->pcidev);
4336         shost->can_queue = phba->cfg_hba_queue_depth - 10;
4337         if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
4338                 lpfc_setup_bg(phba, shost);
4339
4340         lpfc_host_attrib_init(shost);
4341
4342         if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
4343                 spin_lock_irq(shost->host_lock);
4344                 lpfc_poll_start_timer(phba);
4345                 spin_unlock_irq(shost->host_lock);
4346         }
4347
4348         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
4349                         "0428 Perform SCSI scan\n");
4350         /* Send board arrival event to upper layer */
4351         adapter_event.event_type = FC_REG_ADAPTER_EVENT;
4352         adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
4353         fc_host_post_vendor_event(shost, fc_get_event_number(),
4354                                   sizeof(adapter_event),
4355                                   (char *) &adapter_event,
4356                                   LPFC_NL_VENDOR_ID);
4357         return;
4358 }
4359
4360 /**
4361  * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
4362  * @phba: pointer to lpfc hba data structure.
4363  *
4364  * This routine is invoked to set up the PCI device memory space for device
4365  * with SLI-3 interface spec.
4366  *
4367  * Return codes
4368  *      0 - successful
4369  *      other values - error
4370  **/
4371 static int
4372 lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
4373 {
4374         struct pci_dev *pdev;
4375         unsigned long bar0map_len, bar2map_len;
4376         int i, hbq_count;
4377         void *ptr;
4378         int error = -ENODEV;
4379
4380         /* Obtain PCI device reference */
4381         if (!phba->pcidev)
4382                 return error;
4383         else
4384                 pdev = phba->pcidev;
4385
4386         /* Set the device DMA mask size */
4387         if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
4388                 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
4389                         return error;
4390
4391         /* Get the bus address of Bar0 and Bar2 and the number of bytes
4392          * required by each mapping.
4393          */
4394         phba->pci_bar0_map = pci_resource_start(pdev, 0);
4395         bar0map_len = pci_resource_len(pdev, 0);
4396
4397         phba->pci_bar2_map = pci_resource_start(pdev, 2);
4398         bar2map_len = pci_resource_len(pdev, 2);
4399
4400         /* Map HBA SLIM to a kernel virtual address. */
4401         phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
4402         if (!phba->slim_memmap_p) {
4403                 dev_printk(KERN_ERR, &pdev->dev,
4404                            "ioremap failed for SLIM memory.\n");
4405                 goto out;
4406         }
4407
4408         /* Map HBA Control Registers to a kernel virtual address. */
4409         phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
4410         if (!phba->ctrl_regs_memmap_p) {
4411                 dev_printk(KERN_ERR, &pdev->dev,
4412                            "ioremap failed for HBA control registers.\n");
4413                 goto out_iounmap_slim;
4414         }
4415
4416         /* Allocate memory for SLI-2 structures */
4417         phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
4418                                                SLI2_SLIM_SIZE,
4419                                                &phba->slim2p.phys,
4420                                                GFP_KERNEL);
4421         if (!phba->slim2p.virt)
4422                 goto out_iounmap;
4423
4424         memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
4425         phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
4426         phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
4427         phba->IOCBs = (phba->slim2p.virt +
4428                        offsetof(struct lpfc_sli2_slim, IOCBs));
4429
4430         phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
4431                                                  lpfc_sli_hbq_size(),
4432                                                  &phba->hbqslimp.phys,
4433                                                  GFP_KERNEL);
4434         if (!phba->hbqslimp.virt)
4435                 goto out_free_slim;
4436
4437         hbq_count = lpfc_sli_hbq_count();
4438         ptr = phba->hbqslimp.virt;
4439         for (i = 0; i < hbq_count; ++i) {
4440                 phba->hbqs[i].hbq_virt = ptr;
4441                 INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
4442                 ptr += (lpfc_hbq_defs[i]->entry_count *
4443                         sizeof(struct lpfc_hbq_entry));
4444         }
4445         phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
4446         phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
4447
4448         memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
4449
4450         INIT_LIST_HEAD(&phba->rb_pend_list);
4451
4452         phba->MBslimaddr = phba->slim_memmap_p;
4453         phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
4454         phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
4455         phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
4456         phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
4457
4458         return 0;
4459
4460 out_free_slim:
4461         dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
4462                           phba->slim2p.virt, phba->slim2p.phys);
4463 out_iounmap:
4464         iounmap(phba->ctrl_regs_memmap_p);
4465 out_iounmap_slim:
4466         iounmap(phba->slim_memmap_p);
4467 out:
4468         return error;
4469 }
4470
4471 /**
4472  * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
4473  * @phba: pointer to lpfc hba data structure.
4474  *
4475  * This routine is invoked to unset the PCI device memory space for device
4476  * with SLI-3 interface spec.
4477  **/
4478 static void
4479 lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
4480 {
4481         struct pci_dev *pdev;
4482
4483         /* Obtain PCI device reference */
4484         if (!phba->pcidev)
4485                 return;
4486         else
4487                 pdev = phba->pcidev;
4488
4489         /* Free coherent DMA memory allocated */
4490         dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
4491                           phba->hbqslimp.virt, phba->hbqslimp.phys);
4492         dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
4493                           phba->slim2p.virt, phba->slim2p.phys);
4494
4495         /* I/O memory unmap */
4496         iounmap(phba->ctrl_regs_memmap_p);
4497         iounmap(phba->slim_memmap_p);
4498
4499         return;
4500 }
4501
4502 /**
4503  * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
4504  * @phba: pointer to lpfc hba data structure.
4505  *
4506  * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
4507  * done and check status.
4508  *
4509  * Return 0 if successful, otherwise -ENODEV.
4510  **/
4511 int
4512 lpfc_sli4_post_status_check(struct lpfc_hba *phba)
4513 {
4514         struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
4515         uint32_t onlnreg0, onlnreg1;
4516         int i, port_error = -ENODEV;
4517
4518         if (!phba->sli4_hba.STAregaddr)
4519                 return -ENODEV;
4520
4521         /* Wait up to 30 seconds for the SLI Port POST done and ready */
4522         for (i = 0; i < 3000; i++) {
4523                 sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
4524                 /* Encounter fatal POST error, break out */
4525                 if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
4526                         port_error = -ENODEV;
4527                         break;
4528                 }
4529                 if (LPFC_POST_STAGE_ARMFW_READY ==
4530                     bf_get(lpfc_hst_state_port_status, &sta_reg)) {
4531                         port_error = 0;
4532                         break;
4533                 }
4534                 msleep(10);
4535         }
4536
4537         if (port_error)
4538                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4539                         "1408 Failure HBA POST Status: sta_reg=0x%x, "
4540                         "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
4541                         "dl=x%x, pstatus=x%x\n", sta_reg.word0,
4542                         bf_get(lpfc_hst_state_perr, &sta_reg),
4543                         bf_get(lpfc_hst_state_sfi, &sta_reg),
4544                         bf_get(lpfc_hst_state_nip, &sta_reg),
4545                         bf_get(lpfc_hst_state_ipc, &sta_reg),
4546                         bf_get(lpfc_hst_state_xrom, &sta_reg),
4547                         bf_get(lpfc_hst_state_dl, &sta_reg),
4548                         bf_get(lpfc_hst_state_port_status, &sta_reg));
4549
4550         /* Log device information */
4551         scratchpad.word0 =  readl(phba->sli4_hba.SCRATCHPADregaddr);
4552         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
4553                         "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
4554                         "FeatureL1=0x%x, FeatureL2=0x%x\n",
4555                         bf_get(lpfc_scratchpad_chiptype, &scratchpad),
4556                         bf_get(lpfc_scratchpad_slirev, &scratchpad),
4557                         bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
4558                         bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
4559
4560         /* With uncoverable error, log the error message and return error */
4561         onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
4562         onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
4563         if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
4564                 uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
4565                 uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
4566                 if (uerrlo_reg.word0 || uerrhi_reg.word0) {
4567                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4568                                         "1422 HBA Unrecoverable error: "
4569                                         "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
4570                                         "online0_reg=0x%x, online1_reg=0x%x\n",
4571                                         uerrlo_reg.word0, uerrhi_reg.word0,
4572                                         onlnreg0, onlnreg1);
4573                 }
4574                 return -ENODEV;
4575         }
4576
4577         return port_error;
4578 }
4579
4580 /**
4581  * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
4582  * @phba: pointer to lpfc hba data structure.
4583  *
4584  * This routine is invoked to set up SLI4 BAR0 PCI config space register
4585  * memory map.
4586  **/
4587 static void
4588 lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
4589 {
4590         phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
4591                                         LPFC_UERR_STATUS_LO;
4592         phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
4593                                         LPFC_UERR_STATUS_HI;
4594         phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
4595                                         LPFC_ONLINE0;
4596         phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
4597                                         LPFC_ONLINE1;
4598         phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
4599                                         LPFC_SCRATCHPAD;
4600 }
4601
4602 /**
4603  * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
4604  * @phba: pointer to lpfc hba data structure.
4605  *
4606  * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
4607  * memory map.
4608  **/
4609 static void
4610 lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
4611 {
4612
4613         phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
4614                                     LPFC_HST_STATE;
4615         phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
4616                                     LPFC_HST_ISR0;
4617         phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
4618                                     LPFC_HST_IMR0;
4619         phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
4620                                      LPFC_HST_ISCR0;
4621         return;
4622 }
4623
4624 /**
4625  * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
4626  * @phba: pointer to lpfc hba data structure.
4627  * @vf: virtual function number
4628  *
4629  * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
4630  * based on the given viftual function number, @vf.
4631  *
4632  * Return 0 if successful, otherwise -ENODEV.
4633  **/
4634 static int
4635 lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
4636 {
4637         if (vf > LPFC_VIR_FUNC_MAX)
4638                 return -ENODEV;
4639
4640         phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
4641                                 vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
4642         phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
4643                                 vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
4644         phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
4645                                 vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
4646         phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
4647                                 vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
4648         phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
4649                                 vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
4650         return 0;
4651 }
4652
4653 /**
4654  * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
4655  * @phba: pointer to lpfc hba data structure.
4656  *
4657  * This routine is invoked to create the bootstrap mailbox
4658  * region consistent with the SLI-4 interface spec.  This
4659  * routine allocates all memory necessary to communicate
4660  * mailbox commands to the port and sets up all alignment
4661  * needs.  No locks are expected to be held when calling
4662  * this routine.
4663  *
4664  * Return codes
4665  *      0 - successful
4666  *      ENOMEM - could not allocated memory.
4667  **/
4668 static int
4669 lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
4670 {
4671         uint32_t bmbx_size;
4672         struct lpfc_dmabuf *dmabuf;
4673         struct dma_address *dma_address;
4674         uint32_t pa_addr;
4675         uint64_t phys_addr;
4676
4677         dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
4678         if (!dmabuf)
4679                 return -ENOMEM;
4680
4681         /*
4682          * The bootstrap mailbox region is comprised of 2 parts
4683          * plus an alignment restriction of 16 bytes.
4684          */
4685         bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
4686         dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
4687                                           bmbx_size,
4688                                           &dmabuf->phys,
4689                                           GFP_KERNEL);
4690         if (!dmabuf->virt) {
4691                 kfree(dmabuf);
4692                 return -ENOMEM;
4693         }
4694         memset(dmabuf->virt, 0, bmbx_size);
4695
4696         /*
4697          * Initialize the bootstrap mailbox pointers now so that the register
4698          * operations are simple later.  The mailbox dma address is required
4699          * to be 16-byte aligned.  Also align the virtual memory as each
4700          * maibox is copied into the bmbx mailbox region before issuing the
4701          * command to the port.
4702          */
4703         phba->sli4_hba.bmbx.dmabuf = dmabuf;
4704         phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
4705
4706         phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
4707                                               LPFC_ALIGN_16_BYTE);
4708         phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
4709                                               LPFC_ALIGN_16_BYTE);
4710
4711         /*
4712          * Set the high and low physical addresses now.  The SLI4 alignment
4713          * requirement is 16 bytes and the mailbox is posted to the port
4714          * as two 30-bit addresses.  The other data is a bit marking whether
4715          * the 30-bit address is the high or low address.
4716          * Upcast bmbx aphys to 64bits so shift instruction compiles
4717          * clean on 32 bit machines.
4718          */
4719         dma_address = &phba->sli4_hba.bmbx.dma_address;
4720         phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
4721         pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
4722         dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
4723                                            LPFC_BMBX_BIT1_ADDR_HI);
4724
4725         pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
4726         dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
4727                                            LPFC_BMBX_BIT1_ADDR_LO);
4728         return 0;
4729 }
4730
4731 /**
4732  * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
4733  * @phba: pointer to lpfc hba data structure.
4734  *
4735  * This routine is invoked to teardown the bootstrap mailbox
4736  * region and release all host resources. This routine requires
4737  * the caller to ensure all mailbox commands recovered, no
4738  * additional mailbox comands are sent, and interrupts are disabled
4739  * before calling this routine.
4740  *
4741  **/
4742 static void
4743 lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
4744 {
4745         dma_free_coherent(&phba->pcidev->dev,
4746                           phba->sli4_hba.bmbx.bmbx_size,
4747                           phba->sli4_hba.bmbx.dmabuf->virt,
4748                           phba->sli4_hba.bmbx.dmabuf->phys);
4749
4750         kfree(phba->sli4_hba.bmbx.dmabuf);
4751         memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
4752 }
4753
4754 /**
4755  * lpfc_sli4_read_config - Get the config parameters.
4756  * @phba: pointer to lpfc hba data structure.
4757  *
4758  * This routine is invoked to read the configuration parameters from the HBA.
4759  * The configuration parameters are used to set the base and maximum values
4760  * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
4761  * allocation for the port.
4762  *
4763  * Return codes
4764  *      0 - successful
4765  *      ENOMEM - No availble memory
4766  *      EIO - The mailbox failed to complete successfully.
4767  **/
4768 static int
4769 lpfc_sli4_read_config(struct lpfc_hba *phba)
4770 {
4771         LPFC_MBOXQ_t *pmb;
4772         struct lpfc_mbx_read_config *rd_config;
4773         uint32_t rc = 0;
4774
4775         pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4776         if (!pmb) {
4777                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
4778                                 "2011 Unable to allocate memory for issuing "
4779                                 "SLI_CONFIG_SPECIAL mailbox command\n");
4780                 return -ENOMEM;
4781         }
4782
4783         lpfc_read_config(phba, pmb);
4784
4785         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
4786         if (rc != MBX_SUCCESS) {
4787                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
4788                         "2012 Mailbox failed , mbxCmd x%x "
4789                         "READ_CONFIG, mbxStatus x%x\n",
4790                         bf_get(lpfc_mqe_command, &pmb->u.mqe),
4791                         bf_get(lpfc_mqe_status, &pmb->u.mqe));
4792                 rc = -EIO;
4793         } else {
4794                 rd_config = &pmb->u.mqe.un.rd_config;
4795                 phba->sli4_hba.max_cfg_param.max_xri =
4796                         bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
4797                 phba->sli4_hba.max_cfg_param.xri_base =
4798                         bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
4799                 phba->sli4_hba.max_cfg_param.max_vpi =
4800                         bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
4801                 phba->sli4_hba.max_cfg_param.vpi_base =
4802                         bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
4803                 phba->sli4_hba.max_cfg_param.max_rpi =
4804                         bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
4805                 phba->sli4_hba.max_cfg_param.rpi_base =
4806                         bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
4807                 phba->sli4_hba.max_cfg_param.max_vfi =
4808                         bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
4809                 phba->sli4_hba.max_cfg_param.vfi_base =
4810                         bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
4811                 phba->sli4_hba.max_cfg_param.max_fcfi =
4812                         bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
4813                 phba->sli4_hba.max_cfg_param.fcfi_base =
4814                         bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
4815                 phba->sli4_hba.max_cfg_param.max_eq =
4816                         bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
4817                 phba->sli4_hba.max_cfg_param.max_rq =
4818                         bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
4819                 phba->sli4_hba.max_cfg_param.max_wq =
4820                         bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
4821                 phba->sli4_hba.max_cfg_param.max_cq =
4822                         bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
4823                 phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
4824                 phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
4825                 phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
4826                 phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
4827                 phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
4828                 phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
4829                 phba->max_vports = phba->max_vpi;
4830                 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
4831                                 "2003 cfg params XRI(B:%d M:%d), "
4832                                 "VPI(B:%d M:%d) "
4833                                 "VFI(B:%d M:%d) "
4834                                 "RPI(B:%d M:%d) "
4835                                 "FCFI(B:%d M:%d)\n",
4836                                 phba->sli4_hba.max_cfg_param.xri_base,
4837                                 phba->sli4_hba.max_cfg_param.max_xri,
4838                                 phba->sli4_hba.max_cfg_param.vpi_base,
4839                                 phba->sli4_hba.max_cfg_param.max_vpi,
4840                                 phba->sli4_hba.max_cfg_param.vfi_base,
4841                                 phba->sli4_hba.max_cfg_param.max_vfi,
4842                                 phba->sli4_hba.max_cfg_param.rpi_base,
4843                                 phba->sli4_hba.max_cfg_param.max_rpi,
4844                                 phba->sli4_hba.max_cfg_param.fcfi_base,
4845                                 phba->sli4_hba.max_cfg_param.max_fcfi);
4846         }
4847         mempool_free(pmb, phba->mbox_mem_pool);
4848
4849         /* Reset the DFT_HBA_Q_DEPTH to the max xri  */
4850         if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
4851                 phba->cfg_hba_queue_depth =
4852                                 phba->sli4_hba.max_cfg_param.max_xri;
4853         return rc;
4854 }
4855
4856 /**
4857  * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
4858  * @phba: pointer to lpfc hba data structure.
4859  *
4860  * This routine is invoked to setup the host-side endian order to the
4861  * HBA consistent with the SLI-4 interface spec.
4862  *
4863  * Return codes
4864  *      0 - successful
4865  *      ENOMEM - No availble memory
4866  *      EIO - The mailbox failed to complete successfully.
4867  **/
4868 static int
4869 lpfc_setup_endian_order(struct lpfc_hba *phba)
4870 {
4871         LPFC_MBOXQ_t *mboxq;
4872         uint32_t rc = 0;
4873         uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
4874                                       HOST_ENDIAN_HIGH_WORD1};
4875
4876         mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4877         if (!mboxq) {
4878                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4879                                 "0492 Unable to allocate memory for issuing "
4880                                 "SLI_CONFIG_SPECIAL mailbox command\n");
4881                 return -ENOMEM;
4882         }
4883
4884         /*
4885          * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
4886          * words to contain special data values and no other data.
4887          */
4888         memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
4889         memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
4890         rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
4891         if (rc != MBX_SUCCESS) {
4892                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4893                                 "0493 SLI_CONFIG_SPECIAL mailbox failed with "
4894                                 "status x%x\n",
4895                                 rc);
4896                 rc = -EIO;
4897         }
4898
4899         mempool_free(mboxq, phba->mbox_mem_pool);
4900         return rc;
4901 }
4902
4903 /**
4904  * lpfc_sli4_queue_create - Create all the SLI4 queues
4905  * @phba: pointer to lpfc hba data structure.
4906  *
4907  * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
4908  * operation. For each SLI4 queue type, the parameters such as queue entry
4909  * count (queue depth) shall be taken from the module parameter. For now,
4910  * we just use some constant number as place holder.
4911  *
4912  * Return codes
4913  *      0 - successful
4914  *      ENOMEM - No availble memory
4915  *      EIO - The mailbox failed to complete successfully.
4916  **/
4917 static int
4918 lpfc_sli4_queue_create(struct lpfc_hba *phba)
4919 {
4920         struct lpfc_queue *qdesc;
4921         int fcp_eqidx, fcp_cqidx, fcp_wqidx;
4922         int cfg_fcp_wq_count;
4923         int cfg_fcp_eq_count;
4924
4925         /*
4926          * Sanity check for confiugred queue parameters against the run-time
4927          * device parameters
4928          */
4929
4930         /* Sanity check on FCP fast-path WQ parameters */
4931         cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
4932         if (cfg_fcp_wq_count >
4933             (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
4934                 cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
4935                                    LPFC_SP_WQN_DEF;
4936                 if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
4937                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4938                                         "2581 Not enough WQs (%d) from "
4939                                         "the pci function for supporting "
4940                                         "FCP WQs (%d)\n",
4941                                         phba->sli4_hba.max_cfg_param.max_wq,
4942                                         phba->cfg_fcp_wq_count);
4943                         goto out_error;
4944                 }
4945                 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
4946                                 "2582 Not enough WQs (%d) from the pci "
4947                                 "function for supporting the requested "
4948                                 "FCP WQs (%d), the actual FCP WQs can "
4949                                 "be supported: %d\n",
4950                                 phba->sli4_hba.max_cfg_param.max_wq,
4951                                 phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
4952         }
4953         /* The actual number of FCP work queues adopted */
4954         phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
4955
4956         /* Sanity check on FCP fast-path EQ parameters */
4957         cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
4958         if (cfg_fcp_eq_count >
4959             (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
4960                 cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
4961                                    LPFC_SP_EQN_DEF;
4962                 if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
4963                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
4964                                         "2574 Not enough EQs (%d) from the "
4965                                         "pci function for supporting FCP "
4966                                         "EQs (%d)\n",
4967                                         phba->sli4_hba.max_cfg_param.max_eq,
4968                                         phba->cfg_fcp_eq_count);
4969                         goto out_error;
4970                 }
4971                 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
4972                                 "2575 Not enough EQs (%d) from the pci "
4973                                 "function for supporting the requested "
4974                                 "FCP EQs (%d), the actual FCP EQs can "
4975                                 "be supported: %d\n",
4976                                 phba->sli4_hba.max_cfg_param.max_eq,
4977                                 phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
4978         }
4979         /* It does not make sense to have more EQs than WQs */
4980         if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
4981                 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
4982                                 "2593 The number of FCP EQs (%d) is more "
4983                                 "than the number of FCP WQs (%d), take "
4984                                 "the number of FCP EQs same as than of "
4985                                 "WQs (%d)\n", cfg_fcp_eq_count,
4986                                 phba->cfg_fcp_wq_count,
4987                                 phba->cfg_fcp_wq_count);
4988                 cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
4989         }
4990         /* The actual number of FCP event queues adopted */
4991         phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
4992         /* The overall number of event queues used */
4993         phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
4994
4995         /*
4996          * Create Event Queues (EQs)
4997          */
4998
4999         /* Get EQ depth from module parameter, fake the default for now */
5000         phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
5001         phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
5002
5003         /* Create slow path event queue */
5004         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
5005                                       phba->sli4_hba.eq_ecount);
5006         if (!qdesc) {
5007                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5008                                 "0496 Failed allocate slow-path EQ\n");
5009                 goto out_error;
5010         }
5011         phba->sli4_hba.sp_eq = qdesc;
5012
5013         /* Create fast-path FCP Event Queue(s) */
5014         phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
5015                                phba->cfg_fcp_eq_count), GFP_KERNEL);
5016         if (!phba->sli4_hba.fp_eq) {
5017                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5018                                 "2576 Failed allocate memory for fast-path "
5019                                 "EQ record array\n");
5020                 goto out_free_sp_eq;
5021         }
5022         for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
5023                 qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
5024                                               phba->sli4_hba.eq_ecount);
5025                 if (!qdesc) {
5026                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5027                                         "0497 Failed allocate fast-path EQ\n");
5028                         goto out_free_fp_eq;
5029                 }
5030                 phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
5031         }
5032
5033         /*
5034          * Create Complete Queues (CQs)
5035          */
5036
5037         /* Get CQ depth from module parameter, fake the default for now */
5038         phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
5039         phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
5040
5041         /* Create slow-path Mailbox Command Complete Queue */
5042         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
5043                                       phba->sli4_hba.cq_ecount);
5044         if (!qdesc) {
5045                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5046                                 "0500 Failed allocate slow-path mailbox CQ\n");
5047                 goto out_free_fp_eq;
5048         }
5049         phba->sli4_hba.mbx_cq = qdesc;
5050
5051         /* Create slow-path ELS Complete Queue */
5052         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
5053                                       phba->sli4_hba.cq_ecount);
5054         if (!qdesc) {
5055                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5056                                 "0501 Failed allocate slow-path ELS CQ\n");
5057                 goto out_free_mbx_cq;
5058         }
5059         phba->sli4_hba.els_cq = qdesc;
5060
5061         /* Create slow-path Unsolicited Receive Complete Queue */
5062         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
5063                                       phba->sli4_hba.cq_ecount);
5064         if (!qdesc) {
5065                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5066                                 "0502 Failed allocate slow-path USOL RX CQ\n");
5067                 goto out_free_els_cq;
5068         }
5069         phba->sli4_hba.rxq_cq = qdesc;
5070
5071         /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
5072         phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
5073                                 phba->cfg_fcp_eq_count), GFP_KERNEL);
5074         if (!phba->sli4_hba.fcp_cq) {
5075                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5076                                 "2577 Failed allocate memory for fast-path "
5077                                 "CQ record array\n");
5078                 goto out_free_rxq_cq;
5079         }
5080         for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
5081                 qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
5082                                               phba->sli4_hba.cq_ecount);
5083                 if (!qdesc) {
5084                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5085                                         "0499 Failed allocate fast-path FCP "
5086                                         "CQ (%d)\n", fcp_cqidx);
5087                         goto out_free_fcp_cq;
5088                 }
5089                 phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
5090         }
5091
5092         /* Create Mailbox Command Queue */
5093         phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
5094         phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
5095
5096         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
5097                                       phba->sli4_hba.mq_ecount);
5098         if (!qdesc) {
5099                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5100                                 "0505 Failed allocate slow-path MQ\n");
5101                 goto out_free_fcp_cq;
5102         }
5103         phba->sli4_hba.mbx_wq = qdesc;
5104
5105         /*
5106          * Create all the Work Queues (WQs)
5107          */
5108         phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
5109         phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
5110
5111         /* Create slow-path ELS Work Queue */
5112         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
5113                                       phba->sli4_hba.wq_ecount);
5114         if (!qdesc) {
5115                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5116                                 "0504 Failed allocate slow-path ELS WQ\n");
5117                 goto out_free_mbx_wq;
5118         }
5119         phba->sli4_hba.els_wq = qdesc;
5120
5121         /* Create fast-path FCP Work Queue(s) */
5122         phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
5123                                 phba->cfg_fcp_wq_count), GFP_KERNEL);
5124         if (!phba->sli4_hba.fcp_wq) {
5125                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5126                                 "2578 Failed allocate memory for fast-path "
5127                                 "WQ record array\n");
5128                 goto out_free_els_wq;
5129         }
5130         for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
5131                 qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
5132                                               phba->sli4_hba.wq_ecount);
5133                 if (!qdesc) {
5134                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5135                                         "0503 Failed allocate fast-path FCP "
5136                                         "WQ (%d)\n", fcp_wqidx);
5137                         goto out_free_fcp_wq;
5138                 }
5139                 phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
5140         }
5141
5142         /*
5143          * Create Receive Queue (RQ)
5144          */
5145         phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
5146         phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
5147
5148         /* Create Receive Queue for header */
5149         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
5150                                       phba->sli4_hba.rq_ecount);
5151         if (!qdesc) {
5152                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5153                                 "0506 Failed allocate receive HRQ\n");
5154                 goto out_free_fcp_wq;
5155         }
5156         phba->sli4_hba.hdr_rq = qdesc;
5157
5158         /* Create Receive Queue for data */
5159         qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
5160                                       phba->sli4_hba.rq_ecount);
5161         if (!qdesc) {
5162                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5163                                 "0507 Failed allocate receive DRQ\n");
5164                 goto out_free_hdr_rq;
5165         }
5166         phba->sli4_hba.dat_rq = qdesc;
5167
5168         return 0;
5169
5170 out_free_hdr_rq:
5171         lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
5172         phba->sli4_hba.hdr_rq = NULL;
5173 out_free_fcp_wq:
5174         for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
5175                 lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
5176                 phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
5177         }
5178         kfree(phba->sli4_hba.fcp_wq);
5179 out_free_els_wq:
5180         lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
5181         phba->sli4_hba.els_wq = NULL;
5182 out_free_mbx_wq:
5183         lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
5184         phba->sli4_hba.mbx_wq = NULL;
5185 out_free_fcp_cq:
5186         for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
5187                 lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
5188                 phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
5189         }
5190         kfree(phba->sli4_hba.fcp_cq);
5191 out_free_rxq_cq:
5192         lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
5193         phba->sli4_hba.rxq_cq = NULL;
5194 out_free_els_cq:
5195         lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
5196         phba->sli4_hba.els_cq = NULL;
5197 out_free_mbx_cq:
5198         lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
5199         phba->sli4_hba.mbx_cq = NULL;
5200 out_free_fp_eq:
5201         for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
5202                 lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
5203                 phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
5204         }
5205         kfree(phba->sli4_hba.fp_eq);
5206 out_free_sp_eq:
5207         lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
5208         phba->sli4_hba.sp_eq = NULL;
5209 out_error:
5210         return -ENOMEM;
5211 }
5212
5213 /**
5214  * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
5215  * @phba: pointer to lpfc hba data structure.
5216  *
5217  * This routine is invoked to release all the SLI4 queues with the FCoE HBA
5218  * operation.
5219  *
5220  * Return codes
5221  *      0 - successful
5222  *      ENOMEM - No availble memory
5223  *      EIO - The mailbox failed to complete successfully.
5224  **/
5225 static void
5226 lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
5227 {
5228         int fcp_qidx;
5229
5230         /* Release mailbox command work queue */
5231         lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
5232         phba->sli4_hba.mbx_wq = NULL;
5233
5234         /* Release ELS work queue */
5235         lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
5236         phba->sli4_hba.els_wq = NULL;
5237
5238         /* Release FCP work queue */
5239         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
5240                 lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
5241         kfree(phba->sli4_hba.fcp_wq);
5242         phba->sli4_hba.fcp_wq = NULL;
5243
5244         /* Release unsolicited receive queue */
5245         lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
5246         phba->sli4_hba.hdr_rq = NULL;
5247         lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
5248         phba->sli4_hba.dat_rq = NULL;
5249
5250         /* Release unsolicited receive complete queue */
5251         lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
5252         phba->sli4_hba.rxq_cq = NULL;
5253
5254         /* Release ELS complete queue */
5255         lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
5256         phba->sli4_hba.els_cq = NULL;
5257
5258         /* Release mailbox command complete queue */
5259         lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
5260         phba->sli4_hba.mbx_cq = NULL;
5261
5262         /* Release FCP response complete queue */
5263         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
5264                 lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
5265         kfree(phba->sli4_hba.fcp_cq);
5266         phba->sli4_hba.fcp_cq = NULL;
5267
5268         /* Release fast-path event queue */
5269         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
5270                 lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
5271         kfree(phba->sli4_hba.fp_eq);
5272         phba->sli4_hba.fp_eq = NULL;
5273
5274         /* Release slow-path event queue */
5275         lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
5276         phba->sli4_hba.sp_eq = NULL;
5277
5278         return;
5279 }
5280
5281 /**
5282  * lpfc_sli4_queue_setup - Set up all the SLI4 queues
5283  * @phba: pointer to lpfc hba data structure.
5284  *
5285  * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
5286  * operation.
5287  *
5288  * Return codes
5289  *      0 - successful
5290  *      ENOMEM - No availble memory
5291  *      EIO - The mailbox failed to complete successfully.
5292  **/
5293 int
5294 lpfc_sli4_queue_setup(struct lpfc_hba *phba)
5295 {
5296         int rc = -ENOMEM;
5297         int fcp_eqidx, fcp_cqidx, fcp_wqidx;
5298         int fcp_cq_index = 0;
5299
5300         /*
5301          * Set up Event Queues (EQs)
5302          */
5303
5304         /* Set up slow-path event queue */
5305         if (!phba->sli4_hba.sp_eq) {
5306                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5307                                 "0520 Slow-path EQ not allocated\n");
5308                 goto out_error;
5309         }
5310         rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
5311                             LPFC_SP_DEF_IMAX);
5312         if (rc) {
5313                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5314                                 "0521 Failed setup of slow-path EQ: "
5315                                 "rc = 0x%x\n", rc);
5316                 goto out_error;
5317         }
5318         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5319                         "2583 Slow-path EQ setup: queue-id=%d\n",
5320                         phba->sli4_hba.sp_eq->queue_id);
5321
5322         /* Set up fast-path event queue */
5323         for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
5324                 if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
5325                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5326                                         "0522 Fast-path EQ (%d) not "
5327                                         "allocated\n", fcp_eqidx);
5328                         goto out_destroy_fp_eq;
5329                 }
5330                 rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
5331                                     phba->cfg_fcp_imax);
5332                 if (rc) {
5333                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5334                                         "0523 Failed setup of fast-path EQ "
5335                                         "(%d), rc = 0x%x\n", fcp_eqidx, rc);
5336                         goto out_destroy_fp_eq;
5337                 }
5338                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5339                                 "2584 Fast-path EQ setup: "
5340                                 "queue[%d]-id=%d\n", fcp_eqidx,
5341                                 phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
5342         }
5343
5344         /*
5345          * Set up Complete Queues (CQs)
5346          */
5347
5348         /* Set up slow-path MBOX Complete Queue as the first CQ */
5349         if (!phba->sli4_hba.mbx_cq) {
5350                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5351                                 "0528 Mailbox CQ not allocated\n");
5352                 goto out_destroy_fp_eq;
5353         }
5354         rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
5355                             LPFC_MCQ, LPFC_MBOX);
5356         if (rc) {
5357                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5358                                 "0529 Failed setup of slow-path mailbox CQ: "
5359                                 "rc = 0x%x\n", rc);
5360                 goto out_destroy_fp_eq;
5361         }
5362         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5363                         "2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
5364                         phba->sli4_hba.mbx_cq->queue_id,
5365                         phba->sli4_hba.sp_eq->queue_id);
5366
5367         /* Set up slow-path ELS Complete Queue */
5368         if (!phba->sli4_hba.els_cq) {
5369                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5370                                 "0530 ELS CQ not allocated\n");
5371                 goto out_destroy_mbx_cq;
5372         }
5373         rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
5374                             LPFC_WCQ, LPFC_ELS);
5375         if (rc) {
5376                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5377                                 "0531 Failed setup of slow-path ELS CQ: "
5378                                 "rc = 0x%x\n", rc);
5379                 goto out_destroy_mbx_cq;
5380         }
5381         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5382                         "2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
5383                         phba->sli4_hba.els_cq->queue_id,
5384                         phba->sli4_hba.sp_eq->queue_id);
5385
5386         /* Set up slow-path Unsolicited Receive Complete Queue */
5387         if (!phba->sli4_hba.rxq_cq) {
5388                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5389                                 "0532 USOL RX CQ not allocated\n");
5390                 goto out_destroy_els_cq;
5391         }
5392         rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
5393                             LPFC_RCQ, LPFC_USOL);
5394         if (rc) {
5395                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5396                                 "0533 Failed setup of slow-path USOL RX CQ: "
5397                                 "rc = 0x%x\n", rc);
5398                 goto out_destroy_els_cq;
5399         }
5400         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5401                         "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
5402                         phba->sli4_hba.rxq_cq->queue_id,
5403                         phba->sli4_hba.sp_eq->queue_id);
5404
5405         /* Set up fast-path FCP Response Complete Queue */
5406         for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
5407                 if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
5408                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5409                                         "0526 Fast-path FCP CQ (%d) not "
5410                                         "allocated\n", fcp_cqidx);
5411                         goto out_destroy_fcp_cq;
5412                 }
5413                 rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
5414                                     phba->sli4_hba.fp_eq[fcp_cqidx],
5415                                     LPFC_WCQ, LPFC_FCP);
5416                 if (rc) {
5417                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5418                                         "0527 Failed setup of fast-path FCP "
5419                                         "CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
5420                         goto out_destroy_fcp_cq;
5421                 }
5422                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5423                                 "2588 FCP CQ setup: cq[%d]-id=%d, "
5424                                 "parent eq[%d]-id=%d\n",
5425                                 fcp_cqidx,
5426                                 phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
5427                                 fcp_cqidx,
5428                                 phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
5429         }
5430
5431         /*
5432          * Set up all the Work Queues (WQs)
5433          */
5434
5435         /* Set up Mailbox Command Queue */
5436         if (!phba->sli4_hba.mbx_wq) {
5437                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5438                                 "0538 Slow-path MQ not allocated\n");
5439                 goto out_destroy_fcp_cq;
5440         }
5441         rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
5442                             phba->sli4_hba.mbx_cq, LPFC_MBOX);
5443         if (rc) {
5444                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5445                                 "0539 Failed setup of slow-path MQ: "
5446                                 "rc = 0x%x\n", rc);
5447                 goto out_destroy_fcp_cq;
5448         }
5449         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5450                         "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
5451                         phba->sli4_hba.mbx_wq->queue_id,
5452                         phba->sli4_hba.mbx_cq->queue_id);
5453
5454         /* Set up slow-path ELS Work Queue */
5455         if (!phba->sli4_hba.els_wq) {
5456                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5457                                 "0536 Slow-path ELS WQ not allocated\n");
5458                 goto out_destroy_mbx_wq;
5459         }
5460         rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
5461                             phba->sli4_hba.els_cq, LPFC_ELS);
5462         if (rc) {
5463                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5464                                 "0537 Failed setup of slow-path ELS WQ: "
5465                                 "rc = 0x%x\n", rc);
5466                 goto out_destroy_mbx_wq;
5467         }
5468         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5469                         "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
5470                         phba->sli4_hba.els_wq->queue_id,
5471                         phba->sli4_hba.els_cq->queue_id);
5472
5473         /* Set up fast-path FCP Work Queue */
5474         for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
5475                 if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
5476                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5477                                         "0534 Fast-path FCP WQ (%d) not "
5478                                         "allocated\n", fcp_wqidx);
5479                         goto out_destroy_fcp_wq;
5480                 }
5481                 rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
5482                                     phba->sli4_hba.fcp_cq[fcp_cq_index],
5483                                     LPFC_FCP);
5484                 if (rc) {
5485                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5486                                         "0535 Failed setup of fast-path FCP "
5487                                         "WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
5488                         goto out_destroy_fcp_wq;
5489                 }
5490                 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5491                                 "2591 FCP WQ setup: wq[%d]-id=%d, "
5492                                 "parent cq[%d]-id=%d\n",
5493                                 fcp_wqidx,
5494                                 phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
5495                                 fcp_cq_index,
5496                                 phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
5497                 /* Round robin FCP Work Queue's Completion Queue assignment */
5498                 fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
5499         }
5500
5501         /*
5502          * Create Receive Queue (RQ)
5503          */
5504         if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
5505                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5506                                 "0540 Receive Queue not allocated\n");
5507                 goto out_destroy_fcp_wq;
5508         }
5509         rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
5510                             phba->sli4_hba.rxq_cq, LPFC_USOL);
5511         if (rc) {
5512                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5513                                 "0541 Failed setup of Receive Queue: "
5514                                 "rc = 0x%x\n", rc);
5515                 goto out_destroy_fcp_wq;
5516         }
5517         lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
5518                         "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
5519                         "parent cq-id=%d\n",
5520                         phba->sli4_hba.hdr_rq->queue_id,
5521                         phba->sli4_hba.dat_rq->queue_id,
5522                         phba->sli4_hba.rxq_cq->queue_id);
5523         return 0;
5524
5525 out_destroy_fcp_wq:
5526         for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
5527                 lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
5528         lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
5529 out_destroy_mbx_wq:
5530         lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
5531 out_destroy_fcp_cq:
5532         for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
5533                 lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
5534         lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
5535 out_destroy_els_cq:
5536         lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
5537 out_destroy_mbx_cq:
5538         lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
5539 out_destroy_fp_eq:
5540         for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
5541                 lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
5542         lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
5543 out_error:
5544         return rc;
5545 }
5546
5547 /**
5548  * lpfc_sli4_queue_unset - Unset all the SLI4 queues
5549  * @phba: pointer to lpfc hba data structure.
5550  *
5551  * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
5552  * operation.
5553  *
5554  * Return codes
5555  *      0 - successful
5556  *      ENOMEM - No availble memory
5557  *      EIO - The mailbox failed to complete successfully.
5558  **/
5559 void
5560 lpfc_sli4_queue_unset(struct lpfc_hba *phba)
5561 {
5562         int fcp_qidx;
5563
5564         /* Unset mailbox command work queue */
5565         lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
5566         /* Unset ELS work queue */
5567         lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
5568         /* Unset unsolicited receive queue */
5569         lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
5570         /* Unset FCP work queue */
5571         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
5572                 lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
5573         /* Unset mailbox command complete queue */
5574         lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
5575         /* Unset ELS complete queue */
5576         lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
5577         /* Unset unsolicited receive complete queue */
5578         lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
5579         /* Unset FCP response complete queue */
5580         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
5581                 lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
5582         /* Unset fast-path event queue */
5583         for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
5584                 lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
5585         /* Unset slow-path event queue */
5586         lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
5587 }
5588
5589 /**
5590  * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
5591  * @phba: pointer to lpfc hba data structure.
5592  *
5593  * This routine is invoked to allocate and set up a pool of completion queue
5594  * events. The body of the completion queue event is a completion queue entry
5595  * CQE. For now, this pool is used for the interrupt service routine to queue
5596  * the following HBA completion queue events for the worker thread to process:
5597  *   - Mailbox asynchronous events
5598  *   - Receive queue completion unsolicited events
5599  * Later, this can be used for all the slow-path events.
5600  *
5601  * Return codes
5602  *      0 - successful
5603  *      -ENOMEM - No availble memory
5604  **/
5605 static int
5606 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
5607 {
5608         struct lpfc_cq_event *cq_event;
5609         int i;
5610
5611         for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
5612                 cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
5613                 if (!cq_event)
5614                         goto out_pool_create_fail;
5615                 list_add_tail(&cq_event->list,
5616                               &phba->sli4_hba.sp_cqe_event_pool);
5617         }
5618         return 0;
5619
5620 out_pool_create_fail:
5621         lpfc_sli4_cq_event_pool_destroy(phba);
5622         return -ENOMEM;
5623 }
5624
5625 /**
5626  * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
5627  * @phba: pointer to lpfc hba data structure.
5628  *
5629  * This routine is invoked to free the pool of completion queue events at
5630  * driver unload time. Note that, it is the responsibility of the driver
5631  * cleanup routine to free all the outstanding completion-queue events
5632  * allocated from this pool back into the pool before invoking this routine
5633  * to destroy the pool.
5634  **/
5635 static void
5636 lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
5637 {
5638         struct lpfc_cq_event *cq_event, *next_cq_event;
5639
5640         list_for_each_entry_safe(cq_event, next_cq_event,
5641                                  &phba->sli4_hba.sp_cqe_event_pool, list) {
5642                 list_del(&cq_event->list);
5643                 kfree(cq_event);
5644         }
5645 }
5646
5647 /**
5648  * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
5649  * @phba: pointer to lpfc hba data structure.
5650  *
5651  * This routine is the lock free version of the API invoked to allocate a
5652  * completion-queue event from the free pool.
5653  *
5654  * Return: Pointer to the newly allocated completion-queue event if successful
5655  *         NULL otherwise.
5656  **/
5657 struct lpfc_cq_event *
5658 __lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
5659 {
5660         struct lpfc_cq_event *cq_event = NULL;
5661
5662         list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
5663                          struct lpfc_cq_event, list);
5664         return cq_event;
5665 }
5666
5667 /**
5668  * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
5669  * @phba: pointer to lpfc hba data structure.
5670  *
5671  * This routine is the lock version of the API invoked to allocate a
5672  * completion-queue event from the free pool.
5673  *
5674  * Return: Pointer to the newly allocated completion-queue event if successful
5675  *         NULL otherwise.
5676  **/
5677 struct lpfc_cq_event *
5678 lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
5679 {
5680         struct lpfc_cq_event *cq_event;
5681         unsigned long iflags;
5682
5683         spin_lock_irqsave(&phba->hbalock, iflags);
5684         cq_event = __lpfc_sli4_cq_event_alloc(phba);
5685         spin_unlock_irqrestore(&phba->hbalock, iflags);
5686         return cq_event;
5687 }
5688
5689 /**
5690  * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
5691  * @phba: pointer to lpfc hba data structure.
5692  * @cq_event: pointer to the completion queue event to be freed.
5693  *
5694  * This routine is the lock free version of the API invoked to release a
5695  * completion-queue event back into the free pool.
5696  **/
5697 void
5698 __lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
5699                              struct lpfc_cq_event *cq_event)
5700 {
5701         list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
5702 }
5703
5704 /**
5705  * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
5706  * @phba: pointer to lpfc hba data structure.
5707  * @cq_event: pointer to the completion queue event to be freed.
5708  *
5709  * This routine is the lock version of the API invoked to release a
5710  * completion-queue event back into the free pool.
5711  **/
5712 void
5713 lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
5714                            struct lpfc_cq_event *cq_event)
5715 {
5716         unsigned long iflags;
5717         spin_lock_irqsave(&phba->hbalock, iflags);
5718         __lpfc_sli4_cq_event_release(phba, cq_event);
5719         spin_unlock_irqrestore(&phba->hbalock, iflags);
5720 }
5721
5722 /**
5723  * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
5724  * @phba: pointer to lpfc hba data structure.
5725  *
5726  * This routine is to free all the pending completion-queue events to the
5727  * back into the free pool for device reset.
5728  **/
5729 static void
5730 lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
5731 {
5732         LIST_HEAD(cqelist);
5733         struct lpfc_cq_event *cqe;
5734         unsigned long iflags;
5735
5736         /* Retrieve all the pending WCQEs from pending WCQE lists */
5737         spin_lock_irqsave(&phba->hbalock, iflags);
5738         /* Pending FCP XRI abort events */
5739         list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
5740                          &cqelist);
5741         /* Pending ELS XRI abort events */
5742         list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
5743                          &cqelist);
5744         /* Pending asynnc events */
5745         list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
5746                          &cqelist);
5747         spin_unlock_irqrestore(&phba->hbalock, iflags);
5748
5749         while (!list_empty(&cqelist)) {
5750                 list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
5751                 lpfc_sli4_cq_event_release(phba, cqe);
5752         }
5753 }
5754
5755 /**
5756  * lpfc_pci_function_reset - Reset pci function.
5757  * @phba: pointer to lpfc hba data structure.
5758  *
5759  * This routine is invoked to request a PCI function reset. It will destroys
5760  * all resources assigned to the PCI function which originates this request.
5761  *
5762  * Return codes
5763  *      0 - successful
5764  *      ENOMEM - No availble memory
5765  *      EIO - The mailbox failed to complete successfully.
5766  **/
5767 int
5768 lpfc_pci_function_reset(struct lpfc_hba *phba)
5769 {
5770         LPFC_MBOXQ_t *mboxq;
5771         uint32_t rc = 0;
5772         uint32_t shdr_status, shdr_add_status;
5773         union lpfc_sli4_cfg_shdr *shdr;
5774
5775         mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5776         if (!mboxq) {
5777                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5778                                 "0494 Unable to allocate memory for issuing "
5779                                 "SLI_FUNCTION_RESET mailbox command\n");
5780                 return -ENOMEM;
5781         }
5782
5783         /* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
5784         lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
5785                          LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
5786                          LPFC_SLI4_MBX_EMBED);
5787         rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
5788         shdr = (union lpfc_sli4_cfg_shdr *)
5789                 &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
5790         shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
5791         shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
5792         if (rc != MBX_TIMEOUT)
5793                 mempool_free(mboxq, phba->mbox_mem_pool);
5794         if (shdr_status || shdr_add_status || rc) {
5795                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5796                                 "0495 SLI_FUNCTION_RESET mailbox failed with "
5797                                 "status x%x add_status x%x, mbx status x%x\n",
5798                                 shdr_status, shdr_add_status, rc);
5799                 rc = -ENXIO;
5800         }
5801         return rc;
5802 }
5803
5804 /**
5805  * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
5806  * @phba: pointer to lpfc hba data structure.
5807  * @cnt: number of nop mailbox commands to send.
5808  *
5809  * This routine is invoked to send a number @cnt of NOP mailbox command and
5810  * wait for each command to complete.
5811  *
5812  * Return: the number of NOP mailbox command completed.
5813  **/
5814 static int
5815 lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
5816 {
5817         LPFC_MBOXQ_t *mboxq;
5818         int length, cmdsent;
5819         uint32_t mbox_tmo;
5820         uint32_t rc = 0;
5821         uint32_t shdr_status, shdr_add_status;
5822         union lpfc_sli4_cfg_shdr *shdr;
5823
5824         if (cnt == 0) {
5825                 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
5826                                 "2518 Requested to send 0 NOP mailbox cmd\n");
5827                 return cnt;
5828         }
5829
5830         mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5831         if (!mboxq) {
5832                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
5833                                 "2519 Unable to allocate memory for issuing "
5834                                 "NOP mailbox command\n");
5835                 return 0;
5836         }
5837
5838         /* Set up NOP SLI4_CONFIG mailbox-ioctl command */
5839         length = (sizeof(struct lpfc_mbx_nop) -
5840                   sizeof(struct lpfc_sli4_cfg_mhdr));
5841         lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
5842                          LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
5843
5844         mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
5845         for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
5846                 if (!phba->sli4_hba.intr_enable)
5847                         rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
5848                 else
5849                         rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
5850                 if (rc == MBX_TIMEOUT)
5851                         break;
5852                 /* Check return status */
5853                 shdr = (union lpfc_sli4_cfg_shdr *)
5854                         &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
5855                 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
5856                 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
5857                                          &shdr->response);
5858                 if (shdr_status || shdr_add_status || rc) {
5859                         lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
5860                                         "2520 NOP mailbox command failed "
5861                                         "status x%x add_status x%x mbx "
5862                                         "status x%x\n", shdr_status,
5863                                         shdr_add_status, rc);
5864                         break;
5865                 }
5866         }
5867
5868         if (rc != MBX_TIMEOUT)
5869                 mempool_free(mboxq, phba->mbox_mem_pool);
5870
5871         return cmdsent;
5872 }
5873