[SCSI] ses: add subenclosure support
[linux-2.6.git] / drivers / scsi / NCR53c406a.c
1 /* 
2  *  NCR53c406.c
3  *  Low-level SCSI driver for NCR53c406a chip.
4  *  Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com)
5  * 
6  *  LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
7  *  Specify IRQ = 0 for non-interrupt driven mode.
8  *  FASTPIO = 1 for fast pio mode, 0 for slow mode.
9  *
10  *  This program is free software; you can redistribute it and/or modify it
11  *  under the terms of the GNU General Public License as published by the
12  *  Free Software Foundation; either version 2, or (at your option) any
13  *  later version.
14  *
15  *  This program is distributed in the hope that it will be useful, but
16  *  WITHOUT ANY WARRANTY; without even the implied warranty of
17  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  *  General Public License for more details.
19  *
20  */
21
22 #define NCR53C406A_DEBUG 0
23 #define VERBOSE_NCR53C406A_DEBUG 0
24
25 /* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
26 #define USE_PIO 1
27
28 #define USE_BIOS 0
29                                 /* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */
30                                 /* #define PORT_BASE 0x330 *//* define this if autoprobe fails */
31                                 /* #define IRQ_LEV   0  *//* define this if autoprobe fails */
32 #define DMA_CHAN  5             /* this is ignored if DMA is disabled */
33
34 /* Set this to 0 if you encounter kernel lockups while transferring 
35  * data in PIO mode */
36 #define USE_FAST_PIO 1
37
38 /* ============= End of user configurable parameters ============= */
39
40 #include <linux/module.h>
41
42 #include <linux/errno.h>
43 #include <linux/ioport.h>
44 #include <linux/interrupt.h>
45 #include <linux/proc_fs.h>
46 #include <linux/stat.h>
47 #include <linux/init.h>
48 #include <linux/bitops.h>
49 #include <asm/io.h>
50 #include <asm/dma.h>
51 #include <asm/irq.h>
52
53 #include <linux/blkdev.h>
54 #include <linux/spinlock.h>
55 #include "scsi.h"
56 #include <scsi/scsi_host.h>
57
58 /* ============================================================= */
59
60 #define WATCHDOG 5000000
61
62 #define SYNC_MODE 0             /* Synchronous transfer mode */
63
64 #ifdef DEBUG
65 #undef NCR53C406A_DEBUG
66 #define NCR53C406A_DEBUG 1
67 #endif
68
69 #if USE_PIO
70 #define USE_DMA 0
71 #else
72 #define USE_DMA 1
73 #endif
74
75 /* Default configuration */
76 #define C1_IMG   0x07           /* ID=7 */
77 #define C2_IMG   0x48           /* FE SCSI2 */
78 #if USE_DMA
79 #define C3_IMG   0x21           /* CDB TE */
80 #else
81 #define C3_IMG   0x20           /* CDB */
82 #endif
83 #define C4_IMG   0x04           /* ANE */
84 #define C5_IMG   0xb6           /* AA PI SIE POL */
85
86 #define REG0 (outb(C4_IMG, CONFIG4))
87 #define REG1 (outb(C5_IMG, CONFIG5))
88
89 #if NCR53C406A_DEBUG
90 #define DEB(x) x
91 #else
92 #define DEB(x)
93 #endif
94
95 #if VERBOSE_NCR53C406A_DEBUG
96 #define VDEB(x) x
97 #else
98 #define VDEB(x)
99 #endif
100
101 #define LOAD_DMA_COUNT(count) \
102   outb(count & 0xff, TC_LSB); \
103   outb((count >> 8) & 0xff, TC_MSB); \
104   outb((count >> 16) & 0xff, TC_HIGH);
105
106 /* Chip commands */
107 #define DMA_OP               0x80
108
109 #define SCSI_NOP             0x00
110 #define FLUSH_FIFO           0x01
111 #define CHIP_RESET           0x02
112 #define SCSI_RESET           0x03
113 #define RESELECT             0x40
114 #define SELECT_NO_ATN        0x41
115 #define SELECT_ATN           0x42
116 #define SELECT_ATN_STOP      0x43
117 #define ENABLE_SEL           0x44
118 #define DISABLE_SEL          0x45
119 #define SELECT_ATN3          0x46
120 #define RESELECT3            0x47
121 #define TRANSFER_INFO        0x10
122 #define INIT_CMD_COMPLETE    0x11
123 #define MSG_ACCEPT           0x12
124 #define TRANSFER_PAD         0x18
125 #define SET_ATN              0x1a
126 #define RESET_ATN            0x1b
127 #define SEND_MSG             0x20
128 #define SEND_STATUS          0x21
129 #define SEND_DATA            0x22
130 #define DISCONN_SEQ          0x23
131 #define TERMINATE_SEQ        0x24
132 #define TARG_CMD_COMPLETE    0x25
133 #define DISCONN              0x27
134 #define RECV_MSG             0x28
135 #define RECV_CMD             0x29
136 #define RECV_DATA            0x2a
137 #define RECV_CMD_SEQ         0x2b
138 #define TARGET_ABORT_DMA     0x04
139
140 /*----------------------------------------------------------------*/
141 /* the following will set the monitor border color (useful to find
142    where something crashed or gets stuck at */
143 /* 1 = blue
144    2 = green
145    3 = cyan
146    4 = red
147    5 = magenta
148    6 = yellow
149    7 = white
150 */
151
152 #if NCR53C406A_DEBUG
153 #define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
154 #else
155 #define rtrc(i) {}
156 #endif
157 /*----------------------------------------------------------------*/
158
159 enum Phase {
160         idle,
161         data_out,
162         data_in,
163         command_ph,
164         status_ph,
165         message_out,
166         message_in
167 };
168
169 /* Static function prototypes */
170 static void NCR53c406a_intr(void *);
171 static irqreturn_t do_NCR53c406a_intr(int, void *);
172 static void chip_init(void);
173 static void calc_port_addr(void);
174 #ifndef IRQ_LEV
175 static int irq_probe(void);
176 #endif
177
178 /* ================================================================= */
179
180 #if USE_BIOS
181 static void *bios_base;
182 #endif
183
184 #ifdef PORT_BASE
185 static int port_base = PORT_BASE;
186 #else
187 static int port_base;
188 #endif
189
190 #ifdef IRQ_LEV
191 static int irq_level = IRQ_LEV;
192 #else
193 static int irq_level = -1;      /* 0 is 'no irq', so use -1 for 'uninitialized' */
194 #endif
195
196 #if USE_DMA
197 static int dma_chan;
198 #endif
199
200 #if USE_PIO
201 static int fast_pio = USE_FAST_PIO;
202 #endif
203
204 static Scsi_Cmnd *current_SC;
205 static char info_msg[256];
206
207 /* ================================================================= */
208
209 /* possible BIOS locations */
210 #if USE_BIOS
211 static void *addresses[] = {
212         (void *) 0xd8000,
213         (void *) 0xc8000
214 };
215 #define ADDRESS_COUNT ARRAY_SIZE(addresses)
216 #endif                          /* USE_BIOS */
217
218 /* possible i/o port addresses */
219 static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
220 #define PORT_COUNT ARRAY_SIZE(ports)
221
222 #ifndef MODULE
223 /* possible interrupt channels */
224 static unsigned short intrs[] = { 10, 11, 12, 15 };
225 #define INTR_COUNT ARRAY_SIZE(intrs)
226 #endif /* !MODULE */
227
228 /* signatures for NCR 53c406a based controllers */
229 #if USE_BIOS
230 struct signature {
231         char *signature;
232         int sig_offset;
233         int sig_length;
234 } signatures[] __initdata = {
235         /*          1         2         3         4         5         6 */
236         /* 123456789012345678901234567890123456789012345678901234567890 */
237         {
238 "Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
239
240 #define SIGNATURE_COUNT ARRAY_SIZE(signatures)
241 #endif                          /* USE_BIOS */
242
243 /* ============================================================ */
244
245 /* Control Register Set 0 */
246 static int TC_LSB;              /* transfer counter lsb         */
247 static int TC_MSB;              /* transfer counter msb */
248 static int SCSI_FIFO;           /* scsi fifo register   */
249 static int CMD_REG;             /* command register             */
250 static int STAT_REG;            /* status register              */
251 static int DEST_ID;             /* selection/reselection bus id */
252 static int INT_REG;             /* interrupt status register    */
253 static int SRTIMOUT;            /* select/reselect timeout reg  */
254 static int SEQ_REG;             /* sequence step register       */
255 static int SYNCPRD;             /* synchronous transfer period  */
256 static int FIFO_FLAGS;          /* indicates # of bytes in fifo */
257 static int SYNCOFF;             /* synchronous offset register  */
258 static int CONFIG1;             /* configuration register       */
259 static int CLKCONV;             /* clock conversion reg */
260                                 /*static int TESTREG;*//* test mode register           */
261 static int CONFIG2;             /* Configuration 2 Register     */
262 static int CONFIG3;             /* Configuration 3 Register     */
263 static int CONFIG4;             /* Configuration 4 Register     */
264 static int TC_HIGH;             /* Transfer Counter High */
265                                 /*static int FIFO_BOTTOM;*//* Reserve FIFO byte register   */
266
267 /* Control Register Set 1 */
268                                 /*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */
269                                 /*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */
270                                 /*static int SRAM_DATA;*//* SRAM data register (r/w) */
271 static int PIO_FIFO;            /* PIO FIFO registers (r/w) */
272                                 /*static int PIO_FIFO1;*//*  */
273                                 /*static int PIO_FIFO2;*//*  */
274                                 /*static int PIO_FIFO3;*//*  */
275 static int PIO_STATUS;          /* PIO status (r/w) */
276                                 /*static int ATA_CMD;*//* ATA command/status reg (r/w) */
277                                 /*static int ATA_ERR;*//* ATA features/error register (r/w) */
278 static int PIO_FLAG;            /* PIO flag interrupt enable (r/w) */
279 static int CONFIG5;             /* Configuration 5 register (r/w) */
280                                 /*static int SIGNATURE;*//* Signature Register (r) */
281                                 /*static int CONFIG6;*//* Configuration 6 register (r) */
282
283 /* ============================================================== */
284
285 #if USE_DMA
286 static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
287 {
288         unsigned limit;
289         unsigned long flags = 0;
290
291         VDEB(printk("dma: before count=%d   ", count));
292         if (dma_chan <= 3) {
293                 if (count > 65536)
294                         count = 65536;
295                 limit = 65536 - (((unsigned) ptr) & 0xFFFF);
296         } else {
297                 if (count > (65536 << 1))
298                         count = (65536 << 1);
299                 limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
300         }
301
302         if (count > limit)
303                 count = limit;
304
305         VDEB(printk("after count=%d\n", count));
306         if ((count & 1) || (((unsigned) ptr) & 1))
307                 panic("NCR53c406a: attempted unaligned DMA transfer\n");
308
309         flags = claim_dma_lock();
310         disable_dma(dma_chan);
311         clear_dma_ff(dma_chan);
312         set_dma_addr(dma_chan, (long) ptr);
313         set_dma_count(dma_chan, count);
314         set_dma_mode(dma_chan, mode);
315         enable_dma(dma_chan);
316         release_dma_lock(flags);
317
318         return count;
319 }
320
321 static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
322 {
323         return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
324 }
325
326 static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
327 {
328         return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
329 }
330
331 static __inline__ int NCR53c406a_dma_residual(void)
332 {
333         register int tmp;
334         unsigned long flags;
335
336         flags = claim_dma_lock();
337         clear_dma_ff(dma_chan);
338         tmp = get_dma_residue(dma_chan);
339         release_dma_lock(flags);
340
341         return tmp;
342 }
343 #endif                          /* USE_DMA */
344
345 #if USE_PIO
346 static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
347 {
348         int i;
349         int len;                /* current scsi fifo size */
350
351         REG1;
352         while (reqlen) {
353                 i = inb(PIO_STATUS);
354                 /*    VDEB(printk("pio_status=%x\n", i)); */
355                 if (i & 0x80)
356                         return 0;
357
358                 switch (i & 0x1e) {
359                 default:
360                 case 0x10:
361                         len = 0;
362                         break;
363                 case 0x0:
364                         len = 1;
365                         break;
366                 case 0x8:
367                         len = 42;
368                         break;
369                 case 0xc:
370                         len = 84;
371                         break;
372                 case 0xe:
373                         len = 128;
374                         break;
375                 }
376
377                 if ((i & 0x40) && len == 0) {   /* fifo empty and interrupt occurred */
378                         return 0;
379                 }
380
381                 if (len) {
382                         if (len > reqlen)
383                                 len = reqlen;
384
385                         if (fast_pio && len > 3) {
386                                 insl(PIO_FIFO, request, len >> 2);
387                                 request += len & 0xfc;
388                                 reqlen -= len & 0xfc;
389                         } else {
390                                 while (len--) {
391                                         *request++ = inb(PIO_FIFO);
392                                         reqlen--;
393                                 }
394                         }
395                 }
396         }
397         return 0;
398 }
399
400 static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
401 {
402         int i = 0;
403         int len;                /* current scsi fifo size */
404
405         REG1;
406         while (reqlen && !(i & 0x40)) {
407                 i = inb(PIO_STATUS);
408                 /*    VDEB(printk("pio_status=%x\n", i)); */
409                 if (i & 0x80)   /* error */
410                         return 0;
411
412                 switch (i & 0x1e) {
413                 case 0x10:
414                         len = 128;
415                         break;
416                 case 0x0:
417                         len = 84;
418                         break;
419                 case 0x8:
420                         len = 42;
421                         break;
422                 case 0xc:
423                         len = 1;
424                         break;
425                 default:
426                 case 0xe:
427                         len = 0;
428                         break;
429                 }
430
431                 if (len) {
432                         if (len > reqlen)
433                                 len = reqlen;
434
435                         if (fast_pio && len > 3) {
436                                 outsl(PIO_FIFO, request, len >> 2);
437                                 request += len & 0xfc;
438                                 reqlen -= len & 0xfc;
439                         } else {
440                                 while (len--) {
441                                         outb(*request++, PIO_FIFO);
442                                         reqlen--;
443                                 }
444                         }
445                 }
446         }
447         return 0;
448 }
449 #endif                          /* USE_PIO */
450
451 static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
452 {
453         int present = 0;
454         struct Scsi_Host *shpnt = NULL;
455 #ifndef PORT_BASE
456         int i;
457 #endif
458
459 #if USE_BIOS
460         int ii, jj;
461         bios_base = 0;
462         /* look for a valid signature */
463         for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
464                 for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
465                         if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
466                                 bios_base = addresses[ii];
467
468         if (!bios_base) {
469                 printk("NCR53c406a: BIOS signature not found\n");
470                 return 0;
471         }
472
473         DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
474             );
475 #endif                          /* USE_BIOS */
476
477 #ifdef PORT_BASE
478         if (!request_region(port_base, 0x10, "NCR53c406a"))     /* ports already snatched */
479                 port_base = 0;
480
481 #else                           /* autodetect */
482         if (port_base) {        /* LILO override */
483                 if (!request_region(port_base, 0x10, "NCR53c406a"))
484                         port_base = 0;
485         } else {
486                 for (i = 0; i < PORT_COUNT && !port_base; i++) {
487                         if (!request_region(ports[i], 0x10, "NCR53c406a")) {
488                                 DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
489                         } else {
490                                 VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
491                                 outb(C5_IMG, ports[i] + 0x0d);  /* reg set 1 */
492                                 if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
493                                         port_base = ports[i];
494                                         VDEB(printk("NCR53c406a: Sig register valid\n"));
495                                         VDEB(printk("port_base=0x%x\n", port_base));
496                                         break;
497                                 }
498                                 release_region(ports[i], 0x10);
499                         }
500                 }
501         }
502 #endif                          /* PORT_BASE */
503
504         if (!port_base) {       /* no ports found */
505                 printk("NCR53c406a: no available ports found\n");
506                 return 0;
507         }
508
509         DEB(printk("NCR53c406a detected\n"));
510
511         calc_port_addr();
512         chip_init();
513
514 #ifndef IRQ_LEV
515         if (irq_level < 0) {    /* LILO override if >= 0 */
516                 irq_level = irq_probe();
517                 if (irq_level < 0) {    /* Trouble */
518                         printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
519                         goto err_release;
520                 }
521         }
522 #endif
523
524         DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
525
526         present = 1;
527         tpnt->proc_name = "NCR53c406a";
528
529         shpnt = scsi_register(tpnt, 0);
530         if (!shpnt) {
531                 printk("NCR53c406a: Unable to register host, giving up.\n");
532                 goto err_release;
533         }
534
535         if (irq_level > 0) {
536                 if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
537                         printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
538                         goto err_free_scsi;
539                 }
540                 tpnt->can_queue = 1;
541                 DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
542         } else if (irq_level == 0) {
543                 tpnt->can_queue = 0;
544                 DEB(printk("NCR53c406a: No interrupts detected\n"));
545                 printk("NCR53c406a driver no longer supports polling interface\n");
546                 printk("Please email linux-scsi@vger.kernel.org\n");
547                         
548 #if USE_DMA
549                 printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
550 #endif                          /* USE_DMA */
551                 goto err_free_scsi;
552         } else {
553                 DEB(printk("NCR53c406a: Shouldn't get here!\n"));
554                 goto err_free_scsi;
555         }
556
557 #if USE_DMA
558         dma_chan = DMA_CHAN;
559         if (request_dma(dma_chan, "NCR53c406a") != 0) {
560                 printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
561                 goto err_free_irq;
562         }
563
564         DEB(printk("Allocated DMA channel %d\n", dma_chan));
565 #endif                          /* USE_DMA */
566
567         shpnt->irq = irq_level;
568         shpnt->io_port = port_base;
569         shpnt->n_io_port = 0x10;
570 #if USE_DMA
571         shpnt->dma = dma_chan;
572 #endif
573
574 #if USE_DMA
575         sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
576 #else
577         sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
578 #endif
579
580         return (present);
581
582 #if USE_DMA
583       err_free_irq:
584         if (irq_level)
585                 free_irq(irq_level, shpnt);
586 #endif
587       err_free_scsi:
588         scsi_unregister(shpnt);
589       err_release:
590         release_region(port_base, 0x10);
591         return 0;
592 }
593
594 static int NCR53c406a_release(struct Scsi_Host *shost)
595 {
596         if (shost->irq)
597                 free_irq(shost->irq, NULL);
598 #ifdef USE_DMA
599         if (shost->dma_channel != 0xff)
600                 free_dma(shost->dma_channel);
601 #endif
602         if (shost->io_port && shost->n_io_port)
603                 release_region(shost->io_port, shost->n_io_port);
604
605         scsi_unregister(shost);
606         return 0;
607 }
608
609 #ifndef MODULE
610 /* called from init/main.c */
611 static int __init NCR53c406a_setup(char *str)
612 {
613         static size_t setup_idx = 0;
614         size_t i;
615         int ints[4];
616
617         DEB(printk("NCR53c406a: Setup called\n");
618             );
619
620         if (setup_idx >= PORT_COUNT - 1) {
621                 printk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");
622                 return 0;
623         }
624         get_options(str, 4, ints);
625         if (ints[0] < 1 || ints[0] > 3) {
626                 printk("NCR53c406a: Malformed command line\n");
627                 printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
628                 return 0;
629         }
630         for (i = 0; i < PORT_COUNT && !port_base; i++)
631                 if (ports[i] == ints[1]) {
632                         port_base = ints[1];
633                         DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
634                             )
635                 }
636         if (!port_base) {
637                 printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
638                 return 0;
639         }
640
641         if (ints[0] > 1) {
642                 if (ints[2] == 0) {
643                         irq_level = 0;
644                         DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
645                             )
646                 } else
647                         for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
648                                 if (intrs[i] == ints[2]) {
649                                         irq_level = ints[2];
650                                         DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
651                                             )
652                                 }
653                 if (irq_level < 0)
654                         printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
655         }
656
657         if (ints[0] > 2)
658                 fast_pio = ints[3];
659
660         DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
661         return 1;
662 }
663
664 __setup("ncr53c406a=", NCR53c406a_setup);
665
666 #endif /* !MODULE */
667
668 static const char *NCR53c406a_info(struct Scsi_Host *SChost)
669 {
670         DEB(printk("NCR53c406a_info called\n"));
671         return (info_msg);
672 }
673
674 #if 0
675 static void wait_intr(void)
676 {
677         unsigned long i = jiffies + WATCHDOG;
678
679         while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) {     /* wait for a pseudo-interrupt */
680                 cpu_relax();
681                 barrier();
682         }
683
684         if (time_before_eq(i, jiffies)) {       /* Timed out */
685                 rtrc(0);
686                 current_SC->result = DID_TIME_OUT << 16;
687                 current_SC->SCp.phase = idle;
688                 current_SC->scsi_done(current_SC);
689                 return;
690         }
691
692         NCR53c406a_intr(NULL);
693 }
694 #endif
695
696 static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
697 {
698         int i;
699
700         VDEB(printk("NCR53c406a_queue called\n"));
701         DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, scsi_bufflen(SCpnt)));
702
703 #if 0
704         VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
705              printk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));
706         VDEB(printk("\n"));
707 #endif
708
709         current_SC = SCpnt;
710         current_SC->scsi_done = done;
711         current_SC->SCp.phase = command_ph;
712         current_SC->SCp.Status = 0;
713         current_SC->SCp.Message = 0;
714
715         /* We are locked here already by the mid layer */
716         REG0;
717         outb(scmd_id(SCpnt), DEST_ID);  /* set destination */
718         outb(FLUSH_FIFO, CMD_REG);      /* reset the fifos */
719
720         for (i = 0; i < SCpnt->cmd_len; i++) {
721                 outb(SCpnt->cmnd[i], SCSI_FIFO);
722         }
723         outb(SELECT_NO_ATN, CMD_REG);
724
725         rtrc(1);
726         return 0;
727 }
728
729 static DEF_SCSI_QCMD(NCR53c406a_queue)
730
731 static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
732 {
733         DEB(printk("NCR53c406a_reset called\n"));
734
735         spin_lock_irq(SCpnt->device->host->host_lock);
736
737         outb(C4_IMG, CONFIG4);  /* Select reg set 0 */
738         outb(CHIP_RESET, CMD_REG);
739         outb(SCSI_NOP, CMD_REG);        /* required after reset */
740         outb(SCSI_RESET, CMD_REG);
741         chip_init();
742
743         rtrc(2);
744
745         spin_unlock_irq(SCpnt->device->host->host_lock);
746
747         return SUCCESS;
748 }
749
750 static int NCR53c406a_biosparm(struct scsi_device *disk,
751                                struct block_device *dev,
752                                sector_t capacity, int *info_array)
753 {
754         int size;
755
756         DEB(printk("NCR53c406a_biosparm called\n"));
757
758         size = capacity;
759         info_array[0] = 64;     /* heads */
760         info_array[1] = 32;     /* sectors */
761         info_array[2] = size >> 11;     /* cylinders */
762         if (info_array[2] > 1024) {     /* big disk */
763                 info_array[0] = 255;
764                 info_array[1] = 63;
765                 info_array[2] = size / (255 * 63);
766         }
767         return 0;
768 }
769
770 static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id)
771 {
772         unsigned long flags;
773         struct Scsi_Host *dev = dev_id;
774
775         spin_lock_irqsave(dev->host_lock, flags);
776         NCR53c406a_intr(dev_id);
777         spin_unlock_irqrestore(dev->host_lock, flags);
778         return IRQ_HANDLED;
779 }
780
781 static void NCR53c406a_intr(void *dev_id)
782 {
783         DEB(unsigned char fifo_size;
784             )
785             DEB(unsigned char seq_reg;
786             )
787         unsigned char status, int_reg;
788 #if USE_PIO
789         unsigned char pio_status;
790         struct scatterlist *sg;
791         int i;
792 #endif
793
794         VDEB(printk("NCR53c406a_intr called\n"));
795
796 #if USE_PIO
797         REG1;
798         pio_status = inb(PIO_STATUS);
799 #endif
800         REG0;
801         status = inb(STAT_REG);
802         DEB(seq_reg = inb(SEQ_REG));
803         int_reg = inb(INT_REG);
804         DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
805
806 #if NCR53C406A_DEBUG
807         printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
808 #if (USE_DMA)
809         printk("\n");
810 #else
811         printk(", pio=%02x\n", pio_status);
812 #endif                          /* USE_DMA */
813 #endif                          /* NCR53C406A_DEBUG */
814
815         if (int_reg & 0x80) {   /* SCSI reset intr */
816                 rtrc(3);
817                 DEB(printk("NCR53c406a: reset intr received\n"));
818                 current_SC->SCp.phase = idle;
819                 current_SC->result = DID_RESET << 16;
820                 current_SC->scsi_done(current_SC);
821                 return;
822         }
823 #if USE_PIO
824         if (pio_status & 0x80) {
825                 printk("NCR53C406A: Warning: PIO error!\n");
826                 current_SC->SCp.phase = idle;
827                 current_SC->result = DID_ERROR << 16;
828                 current_SC->scsi_done(current_SC);
829                 return;
830         }
831 #endif                          /* USE_PIO */
832
833         if (status & 0x20) {    /* Parity error */
834                 printk("NCR53c406a: Warning: parity error!\n");
835                 current_SC->SCp.phase = idle;
836                 current_SC->result = DID_PARITY << 16;
837                 current_SC->scsi_done(current_SC);
838                 return;
839         }
840
841         if (status & 0x40) {    /* Gross error */
842                 printk("NCR53c406a: Warning: gross error!\n");
843                 current_SC->SCp.phase = idle;
844                 current_SC->result = DID_ERROR << 16;
845                 current_SC->scsi_done(current_SC);
846                 return;
847         }
848
849         if (int_reg & 0x20) {   /* Disconnect */
850                 DEB(printk("NCR53c406a: disconnect intr received\n"));
851                 if (current_SC->SCp.phase != message_in) {      /* Unexpected disconnect */
852                         current_SC->result = DID_NO_CONNECT << 16;
853                 } else {        /* Command complete, return status and message */
854                         current_SC->result = (current_SC->SCp.Status & 0xff)
855                             | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
856                 }
857
858                 rtrc(0);
859                 current_SC->SCp.phase = idle;
860                 current_SC->scsi_done(current_SC);
861                 return;
862         }
863
864         switch (status & 0x07) {        /* scsi phase */
865         case 0x00:              /* DATA-OUT */
866                 if (int_reg & 0x10) {   /* Target requesting info transfer */
867                         rtrc(5);
868                         current_SC->SCp.phase = data_out;
869                         VDEB(printk("NCR53c406a: Data-Out phase\n"));
870                         outb(FLUSH_FIFO, CMD_REG);
871                         LOAD_DMA_COUNT(scsi_bufflen(current_SC));       /* Max transfer size */
872 #if USE_DMA                     /* No s/g support for DMA */
873                         NCR53c406a_dma_write(scsi_sglist(current_SC),
874                                              scsdi_bufflen(current_SC));
875
876 #endif                          /* USE_DMA */
877                         outb(TRANSFER_INFO | DMA_OP, CMD_REG);
878 #if USE_PIO
879                         scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
880                                 NCR53c406a_pio_write(sg_virt(sg), sg->length);
881                         }
882                         REG0;
883 #endif                          /* USE_PIO */
884                 }
885                 break;
886
887         case 0x01:              /* DATA-IN */
888                 if (int_reg & 0x10) {   /* Target requesting info transfer */
889                         rtrc(6);
890                         current_SC->SCp.phase = data_in;
891                         VDEB(printk("NCR53c406a: Data-In phase\n"));
892                         outb(FLUSH_FIFO, CMD_REG);
893                         LOAD_DMA_COUNT(scsi_bufflen(current_SC));       /* Max transfer size */
894 #if USE_DMA                     /* No s/g support for DMA */
895                         NCR53c406a_dma_read(scsi_sglist(current_SC),
896                                             scsdi_bufflen(current_SC));
897 #endif                          /* USE_DMA */
898                         outb(TRANSFER_INFO | DMA_OP, CMD_REG);
899 #if USE_PIO
900                         scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
901                                 NCR53c406a_pio_read(sg_virt(sg), sg->length);
902                         }
903                         REG0;
904 #endif                          /* USE_PIO */
905                 }
906                 break;
907
908         case 0x02:              /* COMMAND */
909                 current_SC->SCp.phase = command_ph;
910                 printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
911                 break;
912
913         case 0x03:              /* STATUS */
914                 rtrc(7);
915                 current_SC->SCp.phase = status_ph;
916                 VDEB(printk("NCR53c406a: Status phase\n"));
917                 outb(FLUSH_FIFO, CMD_REG);
918                 outb(INIT_CMD_COMPLETE, CMD_REG);
919                 break;
920
921         case 0x04:              /* Reserved */
922         case 0x05:              /* Reserved */
923                 printk("NCR53c406a: WARNING: Reserved phase!!!\n");
924                 break;
925
926         case 0x06:              /* MESSAGE-OUT */
927                 DEB(printk("NCR53c406a: Message-Out phase\n"));
928                 current_SC->SCp.phase = message_out;
929                 outb(SET_ATN, CMD_REG); /* Reject the message */
930                 outb(MSG_ACCEPT, CMD_REG);
931                 break;
932
933         case 0x07:              /* MESSAGE-IN */
934                 rtrc(4);
935                 VDEB(printk("NCR53c406a: Message-In phase\n"));
936                 current_SC->SCp.phase = message_in;
937
938                 current_SC->SCp.Status = inb(SCSI_FIFO);
939                 current_SC->SCp.Message = inb(SCSI_FIFO);
940
941                 VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
942                 DEB(printk("Status = %02x  Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
943
944                 if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
945                         outb(SET_ATN, CMD_REG); /* Reject message */
946                         DEB(printk("Discarding SAVE_POINTERS message\n"));
947                 }
948                 outb(MSG_ACCEPT, CMD_REG);
949                 break;
950         }
951 }
952
953 #ifndef IRQ_LEV
954 static int irq_probe(void)
955 {
956         int irqs, irq;
957         unsigned long i;
958
959         inb(INT_REG);           /* clear the interrupt register */
960         irqs = probe_irq_on();
961
962         /* Invalid command will cause an interrupt */
963         REG0;
964         outb(0xff, CMD_REG);
965
966         /* Wait for the interrupt to occur */
967         i = jiffies + WATCHDOG;
968         while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
969                 barrier();
970         if (time_before_eq(i, jiffies)) {       /* Timed out, must be hardware trouble */
971                 probe_irq_off(irqs);
972                 return -1;
973         }
974
975         irq = probe_irq_off(irqs);
976
977         /* Kick the chip */
978         outb(CHIP_RESET, CMD_REG);
979         outb(SCSI_NOP, CMD_REG);
980         chip_init();
981
982         return irq;
983 }
984 #endif                          /* IRQ_LEV */
985
986 static void chip_init(void)
987 {
988         REG1;
989 #if USE_DMA
990         outb(0x00, PIO_STATUS);
991 #else                           /* USE_PIO */
992         outb(0x01, PIO_STATUS);
993 #endif
994         outb(0x00, PIO_FLAG);
995
996         outb(C4_IMG, CONFIG4);  /* REG0; */
997         outb(C3_IMG, CONFIG3);
998         outb(C2_IMG, CONFIG2);
999         outb(C1_IMG, CONFIG1);
1000
1001         outb(0x05, CLKCONV);    /* clock conversion factor */
1002         outb(0x9C, SRTIMOUT);   /* Selection timeout */
1003         outb(0x05, SYNCPRD);    /* Synchronous transfer period */
1004         outb(SYNC_MODE, SYNCOFF);       /* synchronous mode */
1005 }
1006
1007 static void __init calc_port_addr(void)
1008 {
1009         /* Control Register Set 0 */
1010         TC_LSB = (port_base + 0x00);
1011         TC_MSB = (port_base + 0x01);
1012         SCSI_FIFO = (port_base + 0x02);
1013         CMD_REG = (port_base + 0x03);
1014         STAT_REG = (port_base + 0x04);
1015         DEST_ID = (port_base + 0x04);
1016         INT_REG = (port_base + 0x05);
1017         SRTIMOUT = (port_base + 0x05);
1018         SEQ_REG = (port_base + 0x06);
1019         SYNCPRD = (port_base + 0x06);
1020         FIFO_FLAGS = (port_base + 0x07);
1021         SYNCOFF = (port_base + 0x07);
1022         CONFIG1 = (port_base + 0x08);
1023         CLKCONV = (port_base + 0x09);
1024         /* TESTREG          = (port_base+0x0A); */
1025         CONFIG2 = (port_base + 0x0B);
1026         CONFIG3 = (port_base + 0x0C);
1027         CONFIG4 = (port_base + 0x0D);
1028         TC_HIGH = (port_base + 0x0E);
1029         /* FIFO_BOTTOM      = (port_base+0x0F); */
1030
1031         /* Control Register Set 1 */
1032         /* JUMPER_SENSE     = (port_base+0x00); */
1033         /* SRAM_PTR         = (port_base+0x01); */
1034         /* SRAM_DATA        = (port_base+0x02); */
1035         PIO_FIFO = (port_base + 0x04);
1036         /* PIO_FIFO1        = (port_base+0x05); */
1037         /* PIO_FIFO2        = (port_base+0x06); */
1038         /* PIO_FIFO3        = (port_base+0x07); */
1039         PIO_STATUS = (port_base + 0x08);
1040         /* ATA_CMD          = (port_base+0x09); */
1041         /* ATA_ERR          = (port_base+0x0A); */
1042         PIO_FLAG = (port_base + 0x0B);
1043         CONFIG5 = (port_base + 0x0D);
1044         /* SIGNATURE        = (port_base+0x0E); */
1045         /* CONFIG6          = (port_base+0x0F); */
1046 }
1047
1048 MODULE_LICENSE("GPL");
1049
1050 /* NOTE:  scatter-gather support only works in PIO mode.
1051  * Use SG_NONE if DMA mode is enabled!
1052  */
1053
1054 static struct scsi_host_template driver_template =
1055 {
1056      .proc_name                 = "NCR53c406a"          /* proc_name */,        
1057      .name                      = "NCR53c406a"          /* name */,             
1058      .detect                    = NCR53c406a_detect     /* detect */,           
1059      .release                   = NCR53c406a_release,
1060      .info                      = NCR53c406a_info               /* info */,             
1061      .queuecommand              = NCR53c406a_queue      /* queuecommand */,     
1062      .eh_host_reset_handler     = NCR53c406a_host_reset /* reset */,            
1063      .bios_param                = NCR53c406a_biosparm   /* biosparm */,         
1064      .can_queue                 = 1                     /* can_queue */,        
1065      .this_id                   = 7                     /* SCSI ID of the chip */,
1066      .sg_tablesize              = 32                    /*SG_ALL*/ /*SG_NONE*/, 
1067      .cmd_per_lun               = 1                     /* commands per lun */, 
1068      .unchecked_isa_dma         = 1                     /* unchecked_isa_dma */,
1069      .use_clustering            = ENABLE_CLUSTERING,
1070 };
1071
1072 #include "scsi_module.c"
1073
1074 /*
1075  * Overrides for Emacs so that we get a uniform tabbing style.
1076  * Emacs will notice this stuff at the end of the file and automatically
1077  * adjust the settings for this buffer only.  This must remain at the end
1078  * of the file.
1079  * ---------------------------------------------------------------------------
1080  * Local variables:
1081  * c-indent-level: 4
1082  * c-brace-imaginary-offset: 0
1083  * c-brace-offset: -4
1084  * c-argdecl-indent: 4
1085  * c-label-offset: -4
1086  * c-continued-statement-offset: 4
1087  * c-continued-brace-offset: 0
1088  * indent-tabs-mode: nil
1089  * tab-width: 8
1090  * End:
1091  */