twl-regulator: Add all twl4030 regulators to twlreg_info
[linux-2.6.git] / drivers / regulator / twl-regulator.c
1 /*
2  * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
3  *
4  * Copyright (C) 2008 David Brownell
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/err.h>
15 #include <linux/platform_device.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/regulator/machine.h>
18 #include <linux/i2c/twl.h>
19
20
21 /*
22  * The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
23  * USB OTG transceiver, an RTC, ADC, PWM, and lots more.  Some versions
24  * include an audio codec, battery charger, and more voltage regulators.
25  * These chips are often used in OMAP-based systems.
26  *
27  * This driver implements software-based resource control for various
28  * voltage regulators.  This is usually augmented with state machine
29  * based control.
30  */
31
32 struct twlreg_info {
33         /* start of regulator's PM_RECEIVER control register bank */
34         u8                      base;
35
36         /* twl resource ID, for resource control state machine */
37         u8                      id;
38
39         /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
40         u8                      table_len;
41         const u16               *table;
42
43         /* chip constraints on regulator behavior */
44         u16                     min_mV;
45
46         /* used by regulator core */
47         struct regulator_desc   desc;
48 };
49
50
51 /* LDO control registers ... offset is from the base of its register bank.
52  * The first three registers of all power resource banks help hardware to
53  * manage the various resource groups.
54  */
55 /* Common offset in TWL4030/6030 */
56 #define VREG_GRP                0
57 /* TWL4030 register offsets */
58 #define VREG_TYPE               1
59 #define VREG_REMAP              2
60 #define VREG_DEDICATED          3       /* LDO control */
61 /* TWL6030 register offsets */
62 #define VREG_TRANS              1
63 #define VREG_STATE              2
64 #define VREG_VOLTAGE            3
65 /* TWL6030 Misc register offsets */
66 #define VREG_BC_ALL             1
67 #define VREG_BC_REF             2
68 #define VREG_BC_PROC            3
69 #define VREG_BC_CLK_RST         4
70
71 static inline int
72 twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
73 {
74         u8 value;
75         int status;
76
77         status = twl_i2c_read_u8(slave_subgp,
78                         &value, info->base + offset);
79         return (status < 0) ? status : value;
80 }
81
82 static inline int
83 twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
84                                                  u8 value)
85 {
86         return twl_i2c_write_u8(slave_subgp,
87                         value, info->base + offset);
88 }
89
90 /*----------------------------------------------------------------------*/
91
92 /* generic power resource operations, which work on all regulators */
93
94 static int twlreg_grp(struct regulator_dev *rdev)
95 {
96         return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
97                                                                  VREG_GRP);
98 }
99
100 /*
101  * Enable/disable regulators by joining/leaving the P1 (processor) group.
102  * We assume nobody else is updating the DEV_GRP registers.
103  */
104 /* definition for 4030 family */
105 #define P3_GRP_4030     BIT(7)          /* "peripherals" */
106 #define P2_GRP_4030     BIT(6)          /* secondary processor, modem, etc */
107 #define P1_GRP_4030     BIT(5)          /* CPU/Linux */
108 /* definition for 6030 family */
109 #define P3_GRP_6030     BIT(2)          /* secondary processor, modem, etc */
110 #define P2_GRP_6030     BIT(1)          /* "peripherals" */
111 #define P1_GRP_6030     BIT(0)          /* CPU/Linux */
112
113 static int twlreg_is_enabled(struct regulator_dev *rdev)
114 {
115         int     state = twlreg_grp(rdev);
116
117         if (state < 0)
118                 return state;
119
120         if (twl_class_is_4030())
121                 state &= P1_GRP_4030;
122         else
123                 state &= P1_GRP_6030;
124         return state;
125 }
126
127 static int twlreg_enable(struct regulator_dev *rdev)
128 {
129         struct twlreg_info      *info = rdev_get_drvdata(rdev);
130         int                     grp;
131
132         grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
133         if (grp < 0)
134                 return grp;
135
136         if (twl_class_is_4030())
137                 grp |= P1_GRP_4030;
138         else
139                 grp |= P1_GRP_6030;
140
141         return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
142 }
143
144 static int twlreg_disable(struct regulator_dev *rdev)
145 {
146         struct twlreg_info      *info = rdev_get_drvdata(rdev);
147         int                     grp;
148
149         grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
150         if (grp < 0)
151                 return grp;
152
153         if (twl_class_is_4030())
154                 grp &= ~P1_GRP_4030;
155         else
156                 grp &= ~P1_GRP_6030;
157
158         return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
159 }
160
161 static int twlreg_get_status(struct regulator_dev *rdev)
162 {
163         int     state = twlreg_grp(rdev);
164
165         if (twl_class_is_6030())
166                 return 0; /* FIXME return for 6030 regulator */
167
168         if (state < 0)
169                 return state;
170         state &= 0x0f;
171
172         /* assume state != WARM_RESET; we'd not be running...  */
173         if (!state)
174                 return REGULATOR_STATUS_OFF;
175         return (state & BIT(3))
176                 ? REGULATOR_STATUS_NORMAL
177                 : REGULATOR_STATUS_STANDBY;
178 }
179
180 static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
181 {
182         struct twlreg_info      *info = rdev_get_drvdata(rdev);
183         unsigned                message;
184         int                     status;
185
186         if (twl_class_is_6030())
187                 return 0; /* FIXME return for 6030 regulator */
188
189         /* We can only set the mode through state machine commands... */
190         switch (mode) {
191         case REGULATOR_MODE_NORMAL:
192                 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
193                 break;
194         case REGULATOR_MODE_STANDBY:
195                 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
196                 break;
197         default:
198                 return -EINVAL;
199         }
200
201         /* Ensure the resource is associated with some group */
202         status = twlreg_grp(rdev);
203         if (status < 0)
204                 return status;
205         if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
206                 return -EACCES;
207
208         status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
209                         message >> 8, 0x15 /* PB_WORD_MSB */ );
210         if (status >= 0)
211                 return status;
212
213         return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
214                         message, 0x16 /* PB_WORD_LSB */ );
215 }
216
217 /*----------------------------------------------------------------------*/
218
219 /*
220  * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
221  * select field in its control register.   We use tables indexed by VSEL
222  * to record voltages in milliVolts.  (Accuracy is about three percent.)
223  *
224  * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
225  * currently handled by listing two slightly different VAUX2 regulators,
226  * only one of which will be configured.
227  *
228  * VSEL values documented as "TI cannot support these values" are flagged
229  * in these tables as UNSUP() values; we normally won't assign them.
230  *
231  * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
232  * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
233  */
234 #ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
235 #define UNSUP_MASK      0x0000
236 #else
237 #define UNSUP_MASK      0x8000
238 #endif
239
240 #define UNSUP(x)        (UNSUP_MASK | (x))
241 #define IS_UNSUP(x)     (UNSUP_MASK & (x))
242 #define LDO_MV(x)       (~UNSUP_MASK & (x))
243
244
245 static const u16 VAUX1_VSEL_table[] = {
246         UNSUP(1500), UNSUP(1800), 2500, 2800,
247         3000, 3000, 3000, 3000,
248 };
249 static const u16 VAUX2_4030_VSEL_table[] = {
250         UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
251         1500, 1800, UNSUP(1850), 2500,
252         UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
253         UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
254 };
255 static const u16 VAUX2_VSEL_table[] = {
256         1700, 1700, 1900, 1300,
257         1500, 1800, 2000, 2500,
258         2100, 2800, 2200, 2300,
259         2400, 2400, 2400, 2400,
260 };
261 static const u16 VAUX3_VSEL_table[] = {
262         1500, 1800, 2500, 2800,
263         3000, 3000, 3000, 3000,
264 };
265 static const u16 VAUX4_VSEL_table[] = {
266         700, 1000, 1200, UNSUP(1300),
267         1500, 1800, UNSUP(1850), 2500,
268         UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
269         UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
270 };
271 static const u16 VMMC1_VSEL_table[] = {
272         1850, 2850, 3000, 3150,
273 };
274 static const u16 VMMC2_VSEL_table[] = {
275         UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
276         UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
277         2600, 2800, 2850, 3000,
278         3150, 3150, 3150, 3150,
279 };
280 static const u16 VPLL1_VSEL_table[] = {
281         1000, 1200, 1300, 1800,
282         UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
283 };
284 static const u16 VPLL2_VSEL_table[] = {
285         700, 1000, 1200, 1300,
286         UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
287         UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
288         UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
289 };
290 static const u16 VSIM_VSEL_table[] = {
291         UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
292         2800, 3000, 3000, 3000,
293 };
294 static const u16 VDAC_VSEL_table[] = {
295         1200, 1300, 1800, 1800,
296 };
297 static const u16 VDD1_VSEL_table[] = {
298         800, 1450,
299 };
300 static const u16 VDD2_VSEL_table[] = {
301         800, 1450, 1500,
302 };
303 static const u16 VIO_VSEL_table[] = {
304         1800, 1850,
305 };
306 static const u16 VINTANA2_VSEL_table[] = {
307         2500, 2750,
308 };
309 static const u16 VAUX1_6030_VSEL_table[] = {
310         1000, 1300, 1800, 2500,
311         2800, 2900, 3000, 3000,
312 };
313 static const u16 VAUX2_6030_VSEL_table[] = {
314         1200, 1800, 2500, 2750,
315         2800, 2800, 2800, 2800,
316 };
317 static const u16 VAUX3_6030_VSEL_table[] = {
318         1000, 1200, 1300, 1800,
319         2500, 2800, 3000, 3000,
320 };
321 static const u16 VMMC_VSEL_table[] = {
322         1200, 1800, 2800, 2900,
323         3000, 3000, 3000, 3000,
324 };
325 static const u16 VPP_VSEL_table[] = {
326         1800, 1900, 2000, 2100,
327         2200, 2300, 2400, 2500,
328 };
329 static const u16 VUSIM_VSEL_table[] = {
330         1200, 1800, 2500, 2900,
331 };
332
333 static int twlldo_list_voltage(struct regulator_dev *rdev, unsigned index)
334 {
335         struct twlreg_info      *info = rdev_get_drvdata(rdev);
336         int                     mV = info->table[index];
337
338         return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
339 }
340
341 static int
342 twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
343 {
344         struct twlreg_info      *info = rdev_get_drvdata(rdev);
345         int                     vsel;
346
347         for (vsel = 0; vsel < info->table_len; vsel++) {
348                 int mV = info->table[vsel];
349                 int uV;
350
351                 if (IS_UNSUP(mV))
352                         continue;
353                 uV = LDO_MV(mV) * 1000;
354
355                 /* REVISIT for VAUX2, first match may not be best/lowest */
356
357                 /* use the first in-range value */
358                 if (min_uV <= uV && uV <= max_uV)
359                         return twlreg_write(info, TWL_MODULE_PM_RECEIVER,
360                                                         VREG_VOLTAGE, vsel);
361         }
362
363         return -EDOM;
364 }
365
366 static int twlldo_get_voltage(struct regulator_dev *rdev)
367 {
368         struct twlreg_info      *info = rdev_get_drvdata(rdev);
369         int             vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
370                                                                 VREG_VOLTAGE);
371
372         if (vsel < 0)
373                 return vsel;
374
375         vsel &= info->table_len - 1;
376         return LDO_MV(info->table[vsel]) * 1000;
377 }
378
379 static struct regulator_ops twlldo_ops = {
380         .list_voltage   = twlldo_list_voltage,
381
382         .set_voltage    = twlldo_set_voltage,
383         .get_voltage    = twlldo_get_voltage,
384
385         .enable         = twlreg_enable,
386         .disable        = twlreg_disable,
387         .is_enabled     = twlreg_is_enabled,
388
389         .set_mode       = twlreg_set_mode,
390
391         .get_status     = twlreg_get_status,
392 };
393
394 /*----------------------------------------------------------------------*/
395
396 /*
397  * Fixed voltage LDOs don't have a VSEL field to update.
398  */
399 static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index)
400 {
401         struct twlreg_info      *info = rdev_get_drvdata(rdev);
402
403         return info->min_mV * 1000;
404 }
405
406 static int twlfixed_get_voltage(struct regulator_dev *rdev)
407 {
408         struct twlreg_info      *info = rdev_get_drvdata(rdev);
409
410         return info->min_mV * 1000;
411 }
412
413 static struct regulator_ops twlfixed_ops = {
414         .list_voltage   = twlfixed_list_voltage,
415
416         .get_voltage    = twlfixed_get_voltage,
417
418         .enable         = twlreg_enable,
419         .disable        = twlreg_disable,
420         .is_enabled     = twlreg_is_enabled,
421
422         .set_mode       = twlreg_set_mode,
423
424         .get_status     = twlreg_get_status,
425 };
426
427 /*----------------------------------------------------------------------*/
428
429 #define TWL4030_ADJUSTABLE_LDO(label, offset, num) \
430                 TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030)
431 #define TWL4030_FIXED_LDO(label, offset, mVolts, num) \
432                 TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030)
433 #define TWL6030_ADJUSTABLE_LDO(label, offset, num) \
434                 TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030)
435 #define TWL6030_FIXED_LDO(label, offset, mVolts, num) \
436                 TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030)
437
438 #define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \
439         .base = offset, \
440         .id = num, \
441         .table_len = ARRAY_SIZE(label##_VSEL_table), \
442         .table = label##_VSEL_table, \
443         .desc = { \
444                 .name = #label, \
445                 .id = family##_REG_##label, \
446                 .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
447                 .ops = &twlldo_ops, \
448                 .type = REGULATOR_VOLTAGE, \
449                 .owner = THIS_MODULE, \
450                 }, \
451         }
452
453 #define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \
454         .base = offset, \
455         .id = num, \
456         .min_mV = mVolts, \
457         .desc = { \
458                 .name = #label, \
459                 .id = family##_REG_##label, \
460                 .n_voltages = 1, \
461                 .ops = &twlfixed_ops, \
462                 .type = REGULATOR_VOLTAGE, \
463                 .owner = THIS_MODULE, \
464                 }, \
465         }
466
467 /*
468  * We list regulators here if systems need some level of
469  * software control over them after boot.
470  */
471 static struct twlreg_info twl_regs[] = {
472         TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
473         TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
474         TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
475         TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
476         TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
477         TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
478         TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
479         TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
480         TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
481         TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9),
482         TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
483         TWL4030_FIXED_LDO(VINTANA1, 0x3f, 11),
484         TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
485         TWL4030_FIXED_LDO(VINTDIG, 0x47, 13),
486         TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14),
487         TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15),
488         TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16),
489         TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
490         TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
491         TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
492         /* VUSBCP is managed *only* by the USB subchip */
493
494         /* 6030 REG with base as PMC Slave Misc : 0x0030 */
495         TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1),
496         TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2),
497         TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3),
498         TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4),
499         TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5),
500         TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7),
501         TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15),
502         TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16),
503         TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17),
504         TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18)
505 };
506
507 static int twlreg_probe(struct platform_device *pdev)
508 {
509         int                             i;
510         struct twlreg_info              *info;
511         struct regulator_init_data      *initdata;
512         struct regulation_constraints   *c;
513         struct regulator_dev            *rdev;
514
515         for (i = 0, info = NULL; i < ARRAY_SIZE(twl_regs); i++) {
516                 if (twl_regs[i].desc.id != pdev->id)
517                         continue;
518                 info = twl_regs + i;
519                 break;
520         }
521         if (!info)
522                 return -ENODEV;
523
524         initdata = pdev->dev.platform_data;
525         if (!initdata)
526                 return -EINVAL;
527
528         /* Constrain board-specific capabilities according to what
529          * this driver and the chip itself can actually do.
530          */
531         c = &initdata->constraints;
532         c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
533         c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
534                                 | REGULATOR_CHANGE_MODE
535                                 | REGULATOR_CHANGE_STATUS;
536
537         rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
538         if (IS_ERR(rdev)) {
539                 dev_err(&pdev->dev, "can't register %s, %ld\n",
540                                 info->desc.name, PTR_ERR(rdev));
541                 return PTR_ERR(rdev);
542         }
543         platform_set_drvdata(pdev, rdev);
544
545         /* NOTE:  many regulators support short-circuit IRQs (presentable
546          * as REGULATOR_OVER_CURRENT notifications?) configured via:
547          *  - SC_CONFIG
548          *  - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
549          *  - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
550          *  - IT_CONFIG
551          */
552
553         return 0;
554 }
555
556 static int __devexit twlreg_remove(struct platform_device *pdev)
557 {
558         regulator_unregister(platform_get_drvdata(pdev));
559         return 0;
560 }
561
562 MODULE_ALIAS("platform:twl_reg");
563
564 static struct platform_driver twlreg_driver = {
565         .probe          = twlreg_probe,
566         .remove         = __devexit_p(twlreg_remove),
567         /* NOTE: short name, to work around driver model truncation of
568          * "twl_regulator.12" (and friends) to "twl_regulator.1".
569          */
570         .driver.name    = "twl_reg",
571         .driver.owner   = THIS_MODULE,
572 };
573
574 static int __init twlreg_init(void)
575 {
576         return platform_driver_register(&twlreg_driver);
577 }
578 subsys_initcall(twlreg_init);
579
580 static void __exit twlreg_exit(void)
581 {
582         platform_driver_unregister(&twlreg_driver);
583 }
584 module_exit(twlreg_exit)
585
586 MODULE_DESCRIPTION("TWL regulator driver");
587 MODULE_LICENSE("GPL");