75981d88a1e29cdde6b30f65b6354faabf3894c7
[linux-2.6.git] / drivers / net / wireless / orinoco_cs.c
1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
2  *
3  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
4  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
5  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
6  * It should also be usable on various Prism II based cards such as the
7  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
8  * cards such as the 3Com AirConnect and Ericsson WLAN.
9  * 
10  * Copyright notice & release notes in file orinoco.c
11  */
12
13 #define DRIVER_NAME "orinoco_cs"
14 #define PFX DRIVER_NAME ": "
15
16 #include <linux/config.h>
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <pcmcia/cs_types.h>
22 #include <pcmcia/cs.h>
23 #include <pcmcia/cistpl.h>
24 #include <pcmcia/cisreg.h>
25 #include <pcmcia/ds.h>
26
27 #include "orinoco.h"
28
29 /********************************************************************/
30 /* Module stuff                                                     */
31 /********************************************************************/
32
33 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
34 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
35 MODULE_LICENSE("Dual MPL/GPL");
36
37 /* Module parameters */
38
39 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
40  * don't have any CIS entry for it. This workaround it... */
41 static int ignore_cis_vcc; /* = 0 */
42 module_param(ignore_cis_vcc, int, 0);
43 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
44
45 /********************************************************************/
46 /* Data structures                                                  */
47 /********************************************************************/
48
49 /* PCMCIA specific device information (goes in the card field of
50  * struct orinoco_private */
51 struct orinoco_pccard {
52         dev_link_t link;
53         dev_node_t node;
54
55         /* Used to handle hard reset */
56         /* yuck, we need this hack to work around the insanity of the
57          * PCMCIA layer */
58         unsigned long hard_reset_in_progress; 
59 };
60
61
62 /********************************************************************/
63 /* Function prototypes                                              */
64 /********************************************************************/
65
66 static void orinoco_cs_config(dev_link_t *link);
67 static void orinoco_cs_release(dev_link_t *link);
68 static void orinoco_cs_detach(struct pcmcia_device *p_dev);
69
70 /********************************************************************/
71 /* Device methods                                                   */
72 /********************************************************************/
73
74 static int
75 orinoco_cs_hard_reset(struct orinoco_private *priv)
76 {
77         struct orinoco_pccard *card = priv->card;
78         dev_link_t *link = &card->link;
79         int err;
80
81         /* We need atomic ops here, because we're not holding the lock */
82         set_bit(0, &card->hard_reset_in_progress);
83
84         err = pcmcia_reset_card(link->handle, NULL);
85         if (err)
86                 return err;
87
88         msleep(100);
89         clear_bit(0, &card->hard_reset_in_progress);
90
91         return 0;
92 }
93
94 /********************************************************************/
95 /* PCMCIA stuff                                                     */
96 /********************************************************************/
97
98 /*
99  * This creates an "instance" of the driver, allocating local data
100  * structures for one device.  The device is registered with Card
101  * Services.
102  * 
103  * The dev_link structure is initialized, but we don't actually
104  * configure the card at this point -- we wait until we receive a card
105  * insertion event.  */
106 static int
107 orinoco_cs_attach(struct pcmcia_device *p_dev)
108 {
109         struct net_device *dev;
110         struct orinoco_private *priv;
111         struct orinoco_pccard *card;
112         dev_link_t *link;
113
114         dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
115         if (! dev)
116                 return -ENOMEM;
117         priv = netdev_priv(dev);
118         card = priv->card;
119
120         /* Link both structures together */
121         link = &card->link;
122         link->priv = dev;
123
124         /* Interrupt setup */
125         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
126         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
127         link->irq.Handler = orinoco_interrupt;
128         link->irq.Instance = dev; 
129
130         /* General socket configuration defaults can go here.  In this
131          * client, we assume very little, and rely on the CIS for
132          * almost everything.  In most clients, many details (i.e.,
133          * number, sizes, and attributes of IO windows) are fixed by
134          * the nature of the device, and can be hard-wired here. */
135         link->conf.Attributes = 0;
136         link->conf.IntType = INT_MEMORY_AND_IO;
137
138         /* Register with Card Services */
139         link->next = NULL;
140
141         link->handle = p_dev;
142         p_dev->instance = link;
143
144         link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
145         orinoco_cs_config(link);
146
147         return 0;
148 }                               /* orinoco_cs_attach */
149
150 /*
151  * This deletes a driver "instance".  The device is de-registered with
152  * Card Services.  If it has been released, all local data structures
153  * are freed.  Otherwise, the structures will be freed when the device
154  * is released.
155  */
156 static void orinoco_cs_detach(struct pcmcia_device *p_dev)
157 {
158         dev_link_t *link = dev_to_instance(p_dev);
159         struct net_device *dev = link->priv;
160
161         if (link->state & DEV_CONFIG)
162                 orinoco_cs_release(link);
163
164         DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
165         if (link->dev) {
166                 DEBUG(0, PFX "About to unregister net device %p\n",
167                       dev);
168                 unregister_netdev(dev);
169         }
170         free_orinocodev(dev);
171 }                               /* orinoco_cs_detach */
172
173 /*
174  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
175  * event is received, to configure the PCMCIA socket, and to make the
176  * device available to the system.
177  */
178
179 #define CS_CHECK(fn, ret) do { \
180                 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
181         } while (0)
182
183 static void
184 orinoco_cs_config(dev_link_t *link)
185 {
186         struct net_device *dev = link->priv;
187         client_handle_t handle = link->handle;
188         struct orinoco_private *priv = netdev_priv(dev);
189         struct orinoco_pccard *card = priv->card;
190         hermes_t *hw = &priv->hw;
191         int last_fn, last_ret;
192         u_char buf[64];
193         config_info_t conf;
194         cisinfo_t info;
195         tuple_t tuple;
196         cisparse_t parse;
197         void __iomem *mem;
198
199         CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));
200
201         /*
202          * This reads the card's CONFIG tuple to find its
203          * configuration registers.
204          */
205         tuple.DesiredTuple = CISTPL_CONFIG;
206         tuple.Attributes = 0;
207         tuple.TupleData = buf;
208         tuple.TupleDataMax = sizeof(buf);
209         tuple.TupleOffset = 0;
210         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
211         CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
212         CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
213         link->conf.ConfigBase = parse.config.base;
214         link->conf.Present = parse.config.rmask[0];
215
216         /* Configure card */
217         link->state |= DEV_CONFIG;
218
219         /* Look up the current Vcc */
220         CS_CHECK(GetConfigurationInfo,
221                  pcmcia_get_configuration_info(link->handle, &conf));
222
223         /*
224          * In this loop, we scan the CIS for configuration table
225          * entries, each of which describes a valid card
226          * configuration, including voltage, IO window, memory window,
227          * and interrupt settings.
228          *
229          * We make no assumptions about the card to be configured: we
230          * use just the information available in the CIS.  In an ideal
231          * world, this would work for any PCMCIA card, but it requires
232          * a complete and accurate CIS.  In practice, a driver usually
233          * "knows" most of these things without consulting the CIS,
234          * and most client drivers will only use the CIS to fill in
235          * implementation-defined details.
236          */
237         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
238         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
239         while (1) {
240                 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
241                 cistpl_cftable_entry_t dflt = { .index = 0 };
242
243                 if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
244                     || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
245                         goto next_entry;
246
247                 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
248                         dflt = *cfg;
249                 if (cfg->index == 0)
250                         goto next_entry;
251                 link->conf.ConfigIndex = cfg->index;
252
253                 /* Does this card need audio output? */
254                 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
255                         link->conf.Attributes |= CONF_ENABLE_SPKR;
256                         link->conf.Status = CCSR_AUDIO_ENA;
257                 }
258
259                 /* Use power settings for Vcc and Vpp if present */
260                 /* Note that the CIS values need to be rescaled */
261                 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
262                         if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
263                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
264                                 if (!ignore_cis_vcc)
265                                         goto next_entry;
266                         }
267                 } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
268                         if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
269                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
270                                 if(!ignore_cis_vcc)
271                                         goto next_entry;
272                         }
273                 }
274
275                 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
276                         link->conf.Vpp =
277                             cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
278                 else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
279                         link->conf.Vpp =
280                             dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
281                 
282                 /* Do we need to allocate an interrupt? */
283                 link->conf.Attributes |= CONF_ENABLE_IRQ;
284
285                 /* IO window settings */
286                 link->io.NumPorts1 = link->io.NumPorts2 = 0;
287                 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
288                         cistpl_io_t *io =
289                             (cfg->io.nwin) ? &cfg->io : &dflt.io;
290                         link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
291                         if (!(io->flags & CISTPL_IO_8BIT))
292                                 link->io.Attributes1 =
293                                     IO_DATA_PATH_WIDTH_16;
294                         if (!(io->flags & CISTPL_IO_16BIT))
295                                 link->io.Attributes1 =
296                                     IO_DATA_PATH_WIDTH_8;
297                         link->io.IOAddrLines =
298                             io->flags & CISTPL_IO_LINES_MASK;
299                         link->io.BasePort1 = io->win[0].base;
300                         link->io.NumPorts1 = io->win[0].len;
301                         if (io->nwin > 1) {
302                                 link->io.Attributes2 =
303                                     link->io.Attributes1;
304                                 link->io.BasePort2 = io->win[1].base;
305                                 link->io.NumPorts2 = io->win[1].len;
306                         }
307
308                         /* This reserves IO space but doesn't actually enable it */
309                         if (pcmcia_request_io(link->handle, &link->io) != 0)
310                                 goto next_entry;
311                 }
312
313
314                 /* If we got this far, we're cool! */
315
316                 break;
317                 
318         next_entry:
319                 pcmcia_disable_device(handle);
320                 last_ret = pcmcia_get_next_tuple(handle, &tuple);
321                 if (last_ret  == CS_NO_MORE_ITEMS) {
322                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
323                                "CIS configuration.  Maybe you need the "
324                                "ignore_cis_vcc=1 parameter.\n");
325                         goto cs_failed;
326                 }
327         }
328
329         /*
330          * Allocate an interrupt line.  Note that this does not assign
331          * a handler to the interrupt, unless the 'Handler' member of
332          * the irq structure is initialized.
333          */
334         CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
335
336         /* We initialize the hermes structure before completing PCMCIA
337          * configuration just in case the interrupt handler gets
338          * called. */
339         mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
340         if (!mem)
341                 goto cs_failed;
342
343         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
344
345         /*
346          * This actually configures the PCMCIA socket -- setting up
347          * the I/O windows and the interrupt mapping, and putting the
348          * card and host interface into "Memory and IO" mode.
349          */
350         CS_CHECK(RequestConfiguration,
351                  pcmcia_request_configuration(link->handle, &link->conf));
352
353         /* Ok, we have the configuration, prepare to register the netdev */
354         dev->base_addr = link->io.BasePort1;
355         dev->irq = link->irq.AssignedIRQ;
356         SET_MODULE_OWNER(dev);
357         card->node.major = card->node.minor = 0;
358
359         SET_NETDEV_DEV(dev, &handle_to_dev(handle));
360         /* Tell the stack we exist */
361         if (register_netdev(dev) != 0) {
362                 printk(KERN_ERR PFX "register_netdev() failed\n");
363                 goto failed;
364         }
365
366         /* At this point, the dev_node_t structure(s) needs to be
367          * initialized and arranged in a linked list at link->dev. */
368         strcpy(card->node.dev_name, dev->name);
369         link->dev = &card->node; /* link->dev being non-NULL is also
370                                     used to indicate that the
371                                     net_device has been registered */
372         link->state &= ~DEV_CONFIG_PENDING;
373
374         /* Finally, report what we've done */
375         printk(KERN_DEBUG "%s: index 0x%02x: ",
376                dev->name, link->conf.ConfigIndex);
377         if (link->conf.Vpp)
378                 printk(", Vpp %d.%d", link->conf.Vpp / 10,
379                        link->conf.Vpp % 10);
380         printk(", irq %d", link->irq.AssignedIRQ);
381         if (link->io.NumPorts1)
382                 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
383                        link->io.BasePort1 + link->io.NumPorts1 - 1);
384         if (link->io.NumPorts2)
385                 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
386                        link->io.BasePort2 + link->io.NumPorts2 - 1);
387         printk("\n");
388
389         return;
390
391  cs_failed:
392         cs_error(link->handle, last_fn, last_ret);
393
394  failed:
395         orinoco_cs_release(link);
396 }                               /* orinoco_cs_config */
397
398 /*
399  * After a card is removed, orinoco_cs_release() will unregister the
400  * device, and release the PCMCIA configuration.  If the device is
401  * still open, this will be postponed until it is closed.
402  */
403 static void
404 orinoco_cs_release(dev_link_t *link)
405 {
406         struct net_device *dev = link->priv;
407         struct orinoco_private *priv = netdev_priv(dev);
408         unsigned long flags;
409
410         /* We're committed to taking the device away now, so mark the
411          * hardware as unavailable */
412         spin_lock_irqsave(&priv->lock, flags);
413         priv->hw_unavailable++;
414         spin_unlock_irqrestore(&priv->lock, flags);
415
416         pcmcia_disable_device(link->handle);
417         if (priv->hw.iobase)
418                 ioport_unmap(priv->hw.iobase);
419 }                               /* orinoco_cs_release */
420
421 static int orinoco_cs_suspend(struct pcmcia_device *p_dev)
422 {
423         dev_link_t *link = dev_to_instance(p_dev);
424         struct net_device *dev = link->priv;
425         struct orinoco_private *priv = netdev_priv(dev);
426         struct orinoco_pccard *card = priv->card;
427         int err = 0;
428         unsigned long flags;
429
430         if (link->state & DEV_CONFIG) {
431                 /* This is probably racy, but I can't think of
432                    a better way, short of rewriting the PCMCIA
433                    layer to not suck :-( */
434                 if (! test_bit(0, &card->hard_reset_in_progress)) {
435                         spin_lock_irqsave(&priv->lock, flags);
436
437                         err = __orinoco_down(dev);
438                         if (err)
439                                 printk(KERN_WARNING "%s: Error %d downing interface\n",
440                                        dev->name, err);
441
442                         netif_device_detach(dev);
443                         priv->hw_unavailable++;
444
445                         spin_unlock_irqrestore(&priv->lock, flags);
446                 }
447         }
448
449         return 0;
450 }
451
452 static int orinoco_cs_resume(struct pcmcia_device *p_dev)
453 {
454         dev_link_t *link = dev_to_instance(p_dev);
455         struct net_device *dev = link->priv;
456         struct orinoco_private *priv = netdev_priv(dev);
457         struct orinoco_pccard *card = priv->card;
458         int err = 0;
459         unsigned long flags;
460
461         if (link->state & DEV_CONFIG) {
462                 if (! test_bit(0, &card->hard_reset_in_progress)) {
463                         err = orinoco_reinit_firmware(dev);
464                         if (err) {
465                                 printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
466                                        dev->name, err);
467                                 return -EIO;
468                         }
469
470                         spin_lock_irqsave(&priv->lock, flags);
471
472                         netif_device_attach(dev);
473                         priv->hw_unavailable--;
474
475                         if (priv->open && ! priv->hw_unavailable) {
476                                 err = __orinoco_up(dev);
477                                 if (err)
478                                         printk(KERN_ERR "%s: Error %d restarting card\n",
479                                                dev->name, err);
480                         }
481
482                         spin_unlock_irqrestore(&priv->lock, flags);
483                 }
484         }
485
486         return 0;
487 }
488
489
490 /********************************************************************/
491 /* Module initialization                                            */
492 /********************************************************************/
493
494 /* Can't be declared "const" or the whole __initdata section will
495  * become const */
496 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
497         " (David Gibson <hermes@gibson.dropbear.id.au>, "
498         "Pavel Roskin <proski@gnu.org>, et al)";
499
500 static struct pcmcia_device_id orinoco_cs_ids[] = {
501         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
502         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
503         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
504         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
505         PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
506         PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
507         PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
508         PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
509         PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
510         PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
511         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
512         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
513         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
514         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
515         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
516         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
517         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
518         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
519         PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
520         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
521         PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
522         PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
523         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
524         PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
525         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
526         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
527         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
528         PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
529         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
530         PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
531         PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
532         PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
533         PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
534         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
535         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
536         PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
537         PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
538         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
539         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
540         PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
541         PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
542         PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
543         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
544         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
545         PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
546         PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
547         PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
548         PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
549         PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
550         PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
551         PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
552         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
553         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
554         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
555         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
556         PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
557         PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
558         PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
559         PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
560         PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
561         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
562         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
563         PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
564         PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
565         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
566         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
567         PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
568         PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
569         PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
570         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
571         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
572         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
573         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
574         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
575         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
576         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
577         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
578         PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
579         PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
580         PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
581         PCMCIA_DEVICE_NULL,
582 };
583 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
584
585 static struct pcmcia_driver orinoco_driver = {
586         .owner          = THIS_MODULE,
587         .drv            = {
588                 .name   = DRIVER_NAME,
589         },
590         .probe          = orinoco_cs_attach,
591         .remove         = orinoco_cs_detach,
592         .id_table       = orinoco_cs_ids,
593         .suspend        = orinoco_cs_suspend,
594         .resume         = orinoco_cs_resume,
595 };
596
597 static int __init
598 init_orinoco_cs(void)
599 {
600         printk(KERN_DEBUG "%s\n", version);
601
602         return pcmcia_register_driver(&orinoco_driver);
603 }
604
605 static void __exit
606 exit_orinoco_cs(void)
607 {
608         pcmcia_unregister_driver(&orinoco_driver);
609 }
610
611 module_init(init_orinoco_cs);
612 module_exit(exit_orinoco_cs);