]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/net/wireless/libertas/if_cs.c
libertas: document register meanings
[linux-2.6.git] / drivers / net / wireless / libertas / if_cs.c
1 /*
2
3   Driver for the Marvell 8385 based compact flash WLAN cards.
4
5   (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
6
7   This program is free software; you can redistribute it and/or modify
8   it under the terms of the GNU General Public License as published by
9   the Free Software Foundation; either version 2 of the License, or
10   (at your option) any later version.
11
12   This program is distributed in the hope that it will be useful,
13   but WITHOUT ANY WARRANTY; without even the implied warranty of
14   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15   GNU General Public License for more details.
16
17   You should have received a copy of the GNU General Public License
18   along with this program; see the file COPYING.  If not, write to
19   the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
20   Boston, MA 02110-1301, USA.
21
22 */
23
24 #include <linux/module.h>
25 #include <linux/delay.h>
26 #include <linux/moduleparam.h>
27 #include <linux/firmware.h>
28 #include <linux/netdevice.h>
29
30 #include <pcmcia/cs_types.h>
31 #include <pcmcia/cs.h>
32 #include <pcmcia/cistpl.h>
33 #include <pcmcia/ds.h>
34
35 #include <linux/io.h>
36
37 #define DRV_NAME "libertas_cs"
38
39 #include "decl.h"
40 #include "defs.h"
41 #include "dev.h"
42
43
44 /********************************************************************/
45 /* Module stuff                                                     */
46 /********************************************************************/
47
48 MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
49 MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
50 MODULE_LICENSE("GPL");
51
52
53
54 /********************************************************************/
55 /* Data structures                                                  */
56 /********************************************************************/
57
58 struct if_cs_card {
59         struct pcmcia_device *p_dev;
60         struct lbs_private *priv;
61         void __iomem *iobase;
62 };
63
64
65
66 /********************************************************************/
67 /* Hardware access                                                  */
68 /********************************************************************/
69
70 /* This define enables wrapper functions which allow you
71    to dump all register accesses. You normally won't this,
72    except for development */
73 /* #define DEBUG_IO */
74
75 #ifdef DEBUG_IO
76 static int debug_output = 0;
77 #else
78 /* This way the compiler optimizes the printk's away */
79 #define debug_output 0
80 #endif
81
82 static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
83 {
84         unsigned int val = ioread8(card->iobase + reg);
85         if (debug_output)
86                 printk(KERN_INFO "inb %08x<%02x\n", reg, val);
87         return val;
88 }
89 static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
90 {
91         unsigned int val = ioread16(card->iobase + reg);
92         if (debug_output)
93                 printk(KERN_INFO "inw %08x<%04x\n", reg, val);
94         return val;
95 }
96 static inline void if_cs_read16_rep(
97         struct if_cs_card *card,
98         uint reg,
99         void *buf,
100         unsigned long count)
101 {
102         if (debug_output)
103                 printk(KERN_INFO "insw %08x<(0x%lx words)\n",
104                         reg, count);
105         ioread16_rep(card->iobase + reg, buf, count);
106 }
107
108 static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
109 {
110         if (debug_output)
111                 printk(KERN_INFO "outb %08x>%02x\n", reg, val);
112         iowrite8(val, card->iobase + reg);
113 }
114
115 static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
116 {
117         if (debug_output)
118                 printk(KERN_INFO "outw %08x>%04x\n", reg, val);
119         iowrite16(val, card->iobase + reg);
120 }
121
122 static inline void if_cs_write16_rep(
123         struct if_cs_card *card,
124         uint reg,
125         void *buf,
126         unsigned long count)
127 {
128         if (debug_output)
129                 printk(KERN_INFO "outsw %08x>(0x%lx words)\n",
130                         reg, count);
131         iowrite16_rep(card->iobase + reg, buf, count);
132 }
133
134
135 /*
136  * I know that polling/delaying is frowned upon. However, this procedure
137  * with polling is needed while downloading the firmware. At this stage,
138  * the hardware does unfortunately not create any interrupts.
139  *
140  * Fortunately, this function is never used once the firmware is in
141  * the card. :-)
142  *
143  * As a reference, see the "Firmware Specification v5.1", page 18
144  * and 19. I did not follow their suggested timing to the word,
145  * but this works nice & fast anyway.
146  */
147 static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
148 {
149         int i;
150
151         for (i = 0; i < 100000; i++) {
152                 u8 val = if_cs_read8(card, addr);
153                 if (val == reg)
154                         return i;
155                 udelay(5);
156         }
157         return -ETIME;
158 }
159
160
161
162 /*
163  * First the bitmasks for the host/card interrupt/status registers:
164  */
165 #define IF_CS_BIT_TX                    0x0001
166 #define IF_CS_BIT_RX                    0x0002
167 #define IF_CS_BIT_COMMAND               0x0004
168 #define IF_CS_BIT_RESP                  0x0008
169 #define IF_CS_BIT_EVENT                 0x0010
170 #define IF_CS_BIT_MASK                  0x001f
171
172
173
174 /*
175  * It's not really clear to me what the host status register is for. It
176  * needs to be set almost in union with "host int cause". The following
177  * bits from above are used:
178  *
179  *   IF_CS_BIT_TX         driver downloaded a data packet
180  *   IF_CS_BIT_RX         driver got a data packet
181  *   IF_CS_BIT_COMMAND    driver downloaded a command
182  *   IF_CS_BIT_RESP       not used (has some meaning with powerdown)
183  *   IF_CS_BIT_EVENT      driver read a host event
184  */
185 #define IF_CS_HOST_STATUS               0x00000000
186
187 /*
188  * With the host int cause register can the host (that is, Linux) cause
189  * an interrupt in the firmware, to tell the firmware about those events:
190  *
191  *   IF_CS_BIT_TX         a data packet has been downloaded
192  *   IF_CS_BIT_RX         a received data packet has retrieved
193  *   IF_CS_BIT_COMMAND    a firmware block or a command has been downloaded
194  *   IF_CS_BIT_RESP       not used (has some meaning with powerdown)
195  *   IF_CS_BIT_EVENT      a host event (link lost etc) has been retrieved
196  */
197 #define IF_CS_HOST_INT_CAUSE            0x00000002
198
199 /*
200  * The host int mask register is used to enable/disable interrupt.  However,
201  * I have the suspicion that disabled interrupts are lost.
202  */
203 #define IF_CS_HOST_INT_MASK             0x00000004
204
205 /*
206  * Used to send or receive data packets:
207  */
208 #define IF_CS_HOST_WRITE                0x00000016
209 #define IF_CS_HOST_WRITE_LEN            0x00000014
210 #define IF_CS_READ                      0x00000010
211 #define IF_CS_READ_LEN                  0x00000024
212
213 /*
214  * Used to send commands (and to send firmware block) and to
215  * receive command responses:
216  */
217 #define IF_CS_HOST_CMD                  0x0000001A
218 #define IF_CS_HOST_CMD_LEN              0x00000018
219 #define IF_CS_CARD_CMD                  0x00000012
220 #define IF_CS_CARD_CMD_LEN              0x00000030
221
222 /*
223  * The card status registers shows what the card/firmware actually
224  * accepts:
225  *
226  *   IF_CS_BIT_TX        you may send a data packet
227  *   IF_CS_BIT_RX        you may retrieve a data packet
228  *   IF_CS_BIT_COMMAND   you may send a command
229  *   IF_CS_BIT_RESP      you may retrieve a command response
230  *   IF_CS_BIT_EVENT     the card has a event for use (link lost, snr low etc)
231  *
232  * When reading this register several times, you will get back the same
233  * results --- with one exception: the IF_CS_BIT_EVENT clear itself
234  * automatically.
235  *
236  * Not that we don't rely on BIT_RX,_BIT_RESP or BIT_EVENT because
237  * we handle this via the card int cause register.
238  */
239 #define IF_CS_CARD_STATUS               0x00000020
240 #define IF_CS_CARD_STATUS_MASK          0x7f00
241
242 /*
243  * The card int cause register is used by the card/firmware to notify us
244  * about the following events:
245  *
246  *   IF_CS_BIT_TX        a data packet has successfully been sentx
247  *   IF_CS_BIT_RX        a data packet has been received and can be retrieved
248  *   IF_CS_BIT_COMMAND   not used
249  *   IF_CS_BIT_RESP      the firmware has a command response for us
250  *   IF_CS_BIT_EVENT     the card has a event for use (link lost, snr low etc)
251  */
252 #define IF_CS_CARD_INT_CAUSE            0x00000022
253
254 /*
255  * This is used to for handshaking with the card's bootloader/helper image
256  * to synchronize downloading of firmware blocks.
257  */
258 #define IF_CS_CARD_SQ_READ_LOW          0x00000028
259 #define IF_CS_CARD_SQ_HELPER_OK         0x10
260
261 /*
262  * The scratch register tells us ...
263  *
264  * IF_CS_SCRATCH_BOOT_OK     the bootloader runs
265  * IF_CS_SCRATCH_HELPER_OK   the helper firmware already runs
266  */
267 #define IF_CS_SCRATCH                   0x0000003F
268 #define IF_CS_SCRATCH_BOOT_OK           0x00
269 #define IF_CS_SCRATCH_HELPER_OK         0x5a
270
271
272 /********************************************************************/
273 /* I/O and interrupt handling                                       */
274 /********************************************************************/
275
276 static inline void if_cs_enable_ints(struct if_cs_card *card)
277 {
278         lbs_deb_enter(LBS_DEB_CS);
279         if_cs_write16(card, IF_CS_HOST_INT_MASK, 0);
280 }
281
282 static inline void if_cs_disable_ints(struct if_cs_card *card)
283 {
284         lbs_deb_enter(LBS_DEB_CS);
285         if_cs_write16(card, IF_CS_HOST_INT_MASK, IF_CS_BIT_MASK);
286 }
287
288 /*
289  * Called from if_cs_host_to_card to send a command to the hardware
290  */
291 static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
292 {
293         struct if_cs_card *card = (struct if_cs_card *)priv->card;
294         int ret = -1;
295         int loops = 0;
296
297         lbs_deb_enter(LBS_DEB_CS);
298         if_cs_disable_ints(card);
299
300         /* Is hardware ready? */
301         while (1) {
302                 u16 val = if_cs_read16(card, IF_CS_CARD_STATUS);
303                 if (val & IF_CS_BIT_COMMAND)
304                         break;
305                 if (++loops > 100) {
306                         lbs_pr_err("card not ready for commands\n");
307                         goto done;
308                 }
309                 mdelay(1);
310         }
311
312         if_cs_write16(card, IF_CS_HOST_CMD_LEN, nb);
313
314         if_cs_write16_rep(card, IF_CS_HOST_CMD, buf, nb / 2);
315         /* Are we supposed to transfer an odd amount of bytes? */
316         if (nb & 1)
317                 if_cs_write8(card, IF_CS_HOST_CMD, buf[nb-1]);
318
319         /* "Assert the download over interrupt command in the Host
320          * status register" */
321         if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
322
323         /* "Assert the download over interrupt command in the Card
324          * interrupt case register" */
325         if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
326         ret = 0;
327
328 done:
329         if_cs_enable_ints(card);
330         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
331         return ret;
332 }
333
334 /*
335  * Called from if_cs_host_to_card to send a data to the hardware
336  */
337 static void if_cs_send_data(struct lbs_private *priv, u8 *buf, u16 nb)
338 {
339         struct if_cs_card *card = (struct if_cs_card *)priv->card;
340         u16 status;
341
342         lbs_deb_enter(LBS_DEB_CS);
343         if_cs_disable_ints(card);
344
345         status = if_cs_read16(card, IF_CS_CARD_STATUS);
346         BUG_ON((status & IF_CS_BIT_TX) == 0);
347
348         if_cs_write16(card, IF_CS_HOST_WRITE_LEN, nb);
349
350         /* write even number of bytes, then odd byte if necessary */
351         if_cs_write16_rep(card, IF_CS_HOST_WRITE, buf, nb / 2);
352         if (nb & 1)
353                 if_cs_write8(card, IF_CS_HOST_WRITE, buf[nb-1]);
354
355         if_cs_write16(card, IF_CS_HOST_STATUS, IF_CS_BIT_TX);
356         if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_TX);
357         if_cs_enable_ints(card);
358
359         lbs_deb_leave(LBS_DEB_CS);
360 }
361
362 /*
363  * Get the command result out of the card.
364  */
365 static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
366 {
367         unsigned long flags;
368         int ret = -1;
369         u16 status;
370
371         lbs_deb_enter(LBS_DEB_CS);
372
373         /* is hardware ready? */
374         status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
375         if ((status & IF_CS_BIT_RESP) == 0) {
376                 lbs_pr_err("no cmd response in card\n");
377                 *len = 0;
378                 goto out;
379         }
380
381         *len = if_cs_read16(priv->card, IF_CS_CARD_CMD_LEN);
382         if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
383                 lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
384                 goto out;
385         }
386
387         /* read even number of bytes, then odd byte if necessary */
388         if_cs_read16_rep(priv->card, IF_CS_CARD_CMD, data, *len/sizeof(u16));
389         if (*len & 1)
390                 data[*len-1] = if_cs_read8(priv->card, IF_CS_CARD_CMD);
391
392         /* This is a workaround for a firmware that reports too much
393          * bytes */
394         *len -= 8;
395         ret = 0;
396
397         /* Clear this flag again */
398         spin_lock_irqsave(&priv->driver_lock, flags);
399         priv->dnld_sent = DNLD_RES_RECEIVED;
400         spin_unlock_irqrestore(&priv->driver_lock, flags);
401
402 out:
403         lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
404         return ret;
405 }
406
407 static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
408 {
409         struct sk_buff *skb = NULL;
410         u16 len;
411         u8 *data;
412
413         lbs_deb_enter(LBS_DEB_CS);
414
415         len = if_cs_read16(priv->card, IF_CS_READ_LEN);
416         if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
417                 lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
418                 priv->stats.rx_dropped++;
419                 goto dat_err;
420         }
421
422         skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + 2);
423         if (!skb)
424                 goto out;
425         skb_put(skb, len);
426         skb_reserve(skb, 2);/* 16 byte align */
427         data = skb->data;
428
429         /* read even number of bytes, then odd byte if necessary */
430         if_cs_read16_rep(priv->card, IF_CS_READ, data, len/sizeof(u16));
431         if (len & 1)
432                 data[len-1] = if_cs_read8(priv->card, IF_CS_READ);
433
434 dat_err:
435         if_cs_write16(priv->card, IF_CS_HOST_STATUS, IF_CS_BIT_RX);
436         if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_RX);
437
438 out:
439         lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
440         return skb;
441 }
442
443 static irqreturn_t if_cs_interrupt(int irq, void *data)
444 {
445         struct if_cs_card *card = data;
446         struct lbs_private *priv = card->priv;
447         u16 cause;
448
449         lbs_deb_enter(LBS_DEB_CS);
450
451         /* Ask card interrupt cause register if there is something for us */
452         cause = if_cs_read16(card, IF_CS_CARD_INT_CAUSE);
453         lbs_deb_cs("cause 0x%04x\n", cause);
454
455         if (cause == 0) {
456                 /* Not for us */
457                 return IRQ_NONE;
458         }
459
460         if (cause == 0xffff) {
461                 /* Read in junk, the card has probably been removed */
462                 card->priv->surpriseremoved = 1;
463                 return IRQ_HANDLED;
464         }
465
466         if (cause & IF_CS_BIT_RX) {
467                 struct sk_buff *skb;
468                 lbs_deb_cs("rx packet\n");
469                 skb = if_cs_receive_data(priv);
470                 if (skb)
471                         lbs_process_rxed_packet(priv, skb);
472         }
473
474         if (cause & IF_CS_BIT_TX) {
475                 lbs_deb_cs("tx done\n");
476                 lbs_host_to_card_done(priv);
477         }
478
479         if (cause & IF_CS_BIT_RESP) {
480                 unsigned long flags;
481                 u8 i;
482
483                 lbs_deb_cs("cmd resp\n");
484                 spin_lock_irqsave(&priv->driver_lock, flags);
485                 i = (priv->resp_idx == 0) ? 1 : 0;
486                 spin_unlock_irqrestore(&priv->driver_lock, flags);
487
488                 BUG_ON(priv->resp_len[i]);
489                 if_cs_receive_cmdres(priv, priv->resp_buf[i],
490                         &priv->resp_len[i]);
491
492                 spin_lock_irqsave(&priv->driver_lock, flags);
493                 lbs_notify_command_response(priv, i);
494                 spin_unlock_irqrestore(&priv->driver_lock, flags);
495         }
496
497         if (cause & IF_CS_BIT_EVENT) {
498                 u16 event = if_cs_read16(priv->card, IF_CS_CARD_STATUS)
499                         & IF_CS_CARD_STATUS_MASK;
500                 if_cs_write16(priv->card, IF_CS_HOST_INT_CAUSE,
501                         IF_CS_BIT_EVENT);
502                 lbs_deb_cs("host event 0x%04x\n", event);
503                 lbs_queue_event(priv, event >> 8 & 0xff);
504         }
505
506         /* Clear interrupt cause */
507         if_cs_write16(card, IF_CS_CARD_INT_CAUSE, cause & IF_CS_BIT_MASK);
508
509         lbs_deb_leave(LBS_DEB_CS);
510         return IRQ_HANDLED;
511 }
512
513
514
515
516 /********************************************************************/
517 /* Firmware                                                         */
518 /********************************************************************/
519
520 /*
521  * Tries to program the helper firmware.
522  *
523  * Return 0 on success
524  */
525 static int if_cs_prog_helper(struct if_cs_card *card)
526 {
527         int ret = 0;
528         int sent = 0;
529         u8  scratch;
530         const struct firmware *fw;
531
532         lbs_deb_enter(LBS_DEB_CS);
533
534         scratch = if_cs_read8(card, IF_CS_SCRATCH);
535
536         /* "If the value is 0x5a, the firmware is already
537          * downloaded successfully"
538          */
539         if (scratch == IF_CS_SCRATCH_HELPER_OK)
540                 goto done;
541
542         /* "If the value is != 00, it is invalid value of register */
543         if (scratch != IF_CS_SCRATCH_BOOT_OK) {
544                 ret = -ENODEV;
545                 goto done;
546         }
547
548         /* TODO: make firmware file configurable */
549         ret = request_firmware(&fw, "libertas_cs_helper.fw",
550                 &handle_to_dev(card->p_dev));
551         if (ret) {
552                 lbs_pr_err("can't load helper firmware\n");
553                 ret = -ENODEV;
554                 goto done;
555         }
556         lbs_deb_cs("helper size %td\n", fw->size);
557
558         /* "Set the 5 bytes of the helper image to 0" */
559         /* Not needed, this contains an ARM branch instruction */
560
561         for (;;) {
562                 /* "the number of bytes to send is 256" */
563                 int count = 256;
564                 int remain = fw->size - sent;
565
566                 if (remain < count)
567                         count = remain;
568
569                 /* "write the number of bytes to be sent to the I/O Command
570                  * write length register" */
571                 if_cs_write16(card, IF_CS_HOST_CMD_LEN, count);
572
573                 /* "write this to I/O Command port register as 16 bit writes */
574                 if (count)
575                         if_cs_write16_rep(card, IF_CS_HOST_CMD,
576                                 &fw->data[sent],
577                                 count >> 1);
578
579                 /* "Assert the download over interrupt command in the Host
580                  * status register" */
581                 if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
582
583                 /* "Assert the download over interrupt command in the Card
584                  * interrupt case register" */
585                 if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
586
587                 /* "The host polls the Card Status register ... for 50 ms before
588                    declaring a failure */
589                 ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
590                         IF_CS_BIT_COMMAND);
591                 if (ret < 0) {
592                         lbs_pr_err("can't download helper at 0x%x, ret %d\n",
593                                 sent, ret);
594                         goto done;
595                 }
596
597                 if (count == 0)
598                         break;
599
600                 sent += count;
601         }
602
603         release_firmware(fw);
604         ret = 0;
605
606 done:
607         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
608         return ret;
609 }
610
611
612 static int if_cs_prog_real(struct if_cs_card *card)
613 {
614         const struct firmware *fw;
615         int ret = 0;
616         int retry = 0;
617         int len = 0;
618         int sent;
619
620         lbs_deb_enter(LBS_DEB_CS);
621
622         /* TODO: make firmware file configurable */
623         ret = request_firmware(&fw, "libertas_cs.fw",
624                 &handle_to_dev(card->p_dev));
625         if (ret) {
626                 lbs_pr_err("can't load firmware\n");
627                 ret = -ENODEV;
628                 goto done;
629         }
630         lbs_deb_cs("fw size %td\n", fw->size);
631
632         ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_SQ_READ_LOW,
633                 IF_CS_CARD_SQ_HELPER_OK);
634         if (ret < 0) {
635                 lbs_pr_err("helper firmware doesn't answer\n");
636                 goto err_release;
637         }
638
639         for (sent = 0; sent < fw->size; sent += len) {
640                 len = if_cs_read16(card, IF_CS_CARD_SQ_READ_LOW);
641                 if (len & 1) {
642                         retry++;
643                         lbs_pr_info("odd, need to retry this firmware block\n");
644                 } else {
645                         retry = 0;
646                 }
647
648                 if (retry > 20) {
649                         lbs_pr_err("could not download firmware\n");
650                         ret = -ENODEV;
651                         goto err_release;
652                 }
653                 if (retry) {
654                         sent -= len;
655                 }
656
657
658                 if_cs_write16(card, IF_CS_HOST_CMD_LEN, len);
659
660                 if_cs_write16_rep(card, IF_CS_HOST_CMD,
661                         &fw->data[sent],
662                         (len+1) >> 1);
663                 if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND);
664                 if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND);
665
666                 ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
667                         IF_CS_BIT_COMMAND);
668                 if (ret < 0) {
669                         lbs_pr_err("can't download firmware at 0x%x\n", sent);
670                         goto err_release;
671                 }
672         }
673
674         ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
675         if (ret < 0) {
676                 lbs_pr_err("firmware download failed\n");
677                 goto err_release;
678         }
679
680         ret = 0;
681         goto done;
682
683
684 err_release:
685         release_firmware(fw);
686
687 done:
688         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
689         return ret;
690 }
691
692
693
694 /********************************************************************/
695 /* Callback functions for libertas.ko                               */
696 /********************************************************************/
697
698 /* Send commands or data packets to the card */
699 static int if_cs_host_to_card(struct lbs_private *priv,
700         u8 type,
701         u8 *buf,
702         u16 nb)
703 {
704         int ret = -1;
705
706         lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);
707
708         switch (type) {
709         case MVMS_DAT:
710                 priv->dnld_sent = DNLD_DATA_SENT;
711                 if_cs_send_data(priv, buf, nb);
712                 ret = 0;
713                 break;
714         case MVMS_CMD:
715                 priv->dnld_sent = DNLD_CMD_SENT;
716                 ret = if_cs_send_cmd(priv, buf, nb);
717                 break;
718         default:
719                 lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type);
720         }
721
722         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
723         return ret;
724 }
725
726
727 /********************************************************************/
728 /* Card Services                                                    */
729 /********************************************************************/
730
731 /*
732  * After a card is removed, if_cs_release() will unregister the
733  * device, and release the PCMCIA configuration.  If the device is
734  * still open, this will be postponed until it is closed.
735  */
736 static void if_cs_release(struct pcmcia_device *p_dev)
737 {
738         struct if_cs_card *card = p_dev->priv;
739
740         lbs_deb_enter(LBS_DEB_CS);
741
742         free_irq(p_dev->irq.AssignedIRQ, card);
743         pcmcia_disable_device(p_dev);
744         if (card->iobase)
745                 ioport_unmap(card->iobase);
746
747         lbs_deb_leave(LBS_DEB_CS);
748 }
749
750
751 /*
752  * This creates an "instance" of the driver, allocating local data
753  * structures for one device.  The device is registered with Card
754  * Services.
755  *
756  * The dev_link structure is initialized, but we don't actually
757  * configure the card at this point -- we wait until we receive a card
758  * insertion event.
759  */
760 static int if_cs_probe(struct pcmcia_device *p_dev)
761 {
762         int ret = -ENOMEM;
763         struct lbs_private *priv;
764         struct if_cs_card *card;
765         /* CIS parsing */
766         tuple_t tuple;
767         cisparse_t parse;
768         cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
769         cistpl_io_t *io = &cfg->io;
770         u_char buf[64];
771
772         lbs_deb_enter(LBS_DEB_CS);
773
774         card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
775         if (!card) {
776                 lbs_pr_err("error in kzalloc\n");
777                 goto out;
778         }
779         card->p_dev = p_dev;
780         p_dev->priv = card;
781
782         p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
783         p_dev->irq.Handler = NULL;
784         p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
785
786         p_dev->conf.Attributes = 0;
787         p_dev->conf.IntType = INT_MEMORY_AND_IO;
788
789         tuple.Attributes = 0;
790         tuple.TupleData = buf;
791         tuple.TupleDataMax = sizeof(buf);
792         tuple.TupleOffset = 0;
793
794         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
795         if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
796             (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
797             (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
798         {
799                 lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
800                 goto out1;
801         }
802
803         p_dev->conf.ConfigIndex = cfg->index;
804
805         /* Do we need to allocate an interrupt? */
806         if (cfg->irq.IRQInfo1) {
807                 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
808         }
809
810         /* IO window settings */
811         if (cfg->io.nwin != 1) {
812                 lbs_pr_err("wrong CIS (check number of IO windows)\n");
813                 ret = -ENODEV;
814                 goto out1;
815         }
816         p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
817         p_dev->io.BasePort1 = io->win[0].base;
818         p_dev->io.NumPorts1 = io->win[0].len;
819
820         /* This reserves IO space but doesn't actually enable it */
821         ret = pcmcia_request_io(p_dev, &p_dev->io);
822         if (ret) {
823                 lbs_pr_err("error in pcmcia_request_io\n");
824                 goto out1;
825         }
826
827         /*
828          * Allocate an interrupt line.  Note that this does not assign
829          * a handler to the interrupt, unless the 'Handler' member of
830          * the irq structure is initialized.
831          */
832         if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
833                 ret = pcmcia_request_irq(p_dev, &p_dev->irq);
834                 if (ret) {
835                         lbs_pr_err("error in pcmcia_request_irq\n");
836                         goto out1;
837                 }
838         }
839
840         /* Initialize io access */
841         card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
842         if (!card->iobase) {
843                 lbs_pr_err("error in ioport_map\n");
844                 ret = -EIO;
845                 goto out1;
846         }
847
848         /*
849          * This actually configures the PCMCIA socket -- setting up
850          * the I/O windows and the interrupt mapping, and putting the
851          * card and host interface into "Memory and IO" mode.
852          */
853         ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
854         if (ret) {
855                 lbs_pr_err("error in pcmcia_request_configuration\n");
856                 goto out2;
857         }
858
859         /* Finally, report what we've done */
860         lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
861                p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
862                p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
863
864
865         /* Load the firmware early, before calling into libertas.ko */
866         ret = if_cs_prog_helper(card);
867         if (ret == 0)
868                 ret = if_cs_prog_real(card);
869         if (ret)
870                 goto out2;
871
872         /* Make this card known to the libertas driver */
873         priv = lbs_add_card(card, &p_dev->dev);
874         if (!priv) {
875                 ret = -ENOMEM;
876                 goto out2;
877         }
878
879         /* Finish setting up fields in lbs_private */
880         card->priv = priv;
881         priv->card = card;
882         priv->hw_host_to_card = if_cs_host_to_card;
883         priv->fw_ready = 1;
884
885         /* Now actually get the IRQ */
886         ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
887                 IRQF_SHARED, DRV_NAME, card);
888         if (ret) {
889                 lbs_pr_err("error in request_irq\n");
890                 goto out3;
891         }
892
893         /* Clear any interrupt cause that happend while sending
894          * firmware/initializing card */
895         if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
896         if_cs_enable_ints(card);
897
898         /* And finally bring the card up */
899         if (lbs_start_card(priv) != 0) {
900                 lbs_pr_err("could not activate card\n");
901                 goto out3;
902         }
903
904         /* The firmware for the CF card supports powersave */
905         priv->ps_supported = 1;
906
907         ret = 0;
908         goto out;
909
910 out3:
911         lbs_remove_card(priv);
912 out2:
913         ioport_unmap(card->iobase);
914 out1:
915         pcmcia_disable_device(p_dev);
916 out:
917         lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
918         return ret;
919 }
920
921
922 /*
923  * This deletes a driver "instance".  The device is de-registered with
924  * Card Services.  If it has been released, all local data structures
925  * are freed.  Otherwise, the structures will be freed when the device
926  * is released.
927  */
928 static void if_cs_detach(struct pcmcia_device *p_dev)
929 {
930         struct if_cs_card *card = p_dev->priv;
931
932         lbs_deb_enter(LBS_DEB_CS);
933
934         lbs_stop_card(card->priv);
935         lbs_remove_card(card->priv);
936         if_cs_disable_ints(card);
937         if_cs_release(p_dev);
938         kfree(card);
939
940         lbs_deb_leave(LBS_DEB_CS);
941 }
942
943
944
945 /********************************************************************/
946 /* Module initialization                                            */
947 /********************************************************************/
948
949 static struct pcmcia_device_id if_cs_ids[] = {
950         PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
951         PCMCIA_DEVICE_NULL,
952 };
953 MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
954
955
956 static struct pcmcia_driver lbs_driver = {
957         .owner          = THIS_MODULE,
958         .drv            = {
959                 .name   = DRV_NAME,
960         },
961         .probe          = if_cs_probe,
962         .remove         = if_cs_detach,
963         .id_table       = if_cs_ids,
964 };
965
966
967 static int __init if_cs_init(void)
968 {
969         int ret;
970
971         lbs_deb_enter(LBS_DEB_CS);
972         ret = pcmcia_register_driver(&lbs_driver);
973         lbs_deb_leave(LBS_DEB_CS);
974         return ret;
975 }
976
977
978 static void __exit if_cs_exit(void)
979 {
980         lbs_deb_enter(LBS_DEB_CS);
981         pcmcia_unregister_driver(&lbs_driver);
982         lbs_deb_leave(LBS_DEB_CS);
983 }
984
985
986 module_init(if_cs_init);
987 module_exit(if_cs_exit);