Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[linux-2.6.git] / drivers / net / wireless / iwlwifi / iwl-agn.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *
28  *****************************************************************************/
29
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/sched.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
43
44 #include <net/mac80211.h>
45
46 #include <asm/div64.h>
47
48 #define DRV_NAME        "iwlagn"
49
50 #include "iwl-eeprom.h"
51 #include "iwl-dev.h"
52 #include "iwl-core.h"
53 #include "iwl-io.h"
54 #include "iwl-helpers.h"
55 #include "iwl-sta.h"
56 #include "iwl-calib.h"
57 #include "iwl-agn.h"
58
59
60 /******************************************************************************
61  *
62  * module boiler plate
63  *
64  ******************************************************************************/
65
66 /*
67  * module name, copyright, version, etc.
68  */
69 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
70
71 #ifdef CONFIG_IWLWIFI_DEBUG
72 #define VD "d"
73 #else
74 #define VD
75 #endif
76
77 #define DRV_VERSION     IWLWIFI_VERSION VD
78
79
80 MODULE_DESCRIPTION(DRV_DESCRIPTION);
81 MODULE_VERSION(DRV_VERSION);
82 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
83 MODULE_LICENSE("GPL");
84 MODULE_ALIAS("iwl4965");
85
86 /*************** STATION TABLE MANAGEMENT ****
87  * mac80211 should be examined to determine if sta_info is duplicating
88  * the functionality provided here
89  */
90
91 /**************************************************************/
92
93 /**
94  * iwl_commit_rxon - commit staging_rxon to hardware
95  *
96  * The RXON command in staging_rxon is committed to the hardware and
97  * the active_rxon structure is updated with the new data.  This
98  * function correctly transitions out of the RXON_ASSOC_MSK state if
99  * a HW tune is required based on the RXON structure changes.
100  */
101 int iwl_commit_rxon(struct iwl_priv *priv)
102 {
103         /* cast away the const for active_rxon in this function */
104         struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
105         int ret;
106         bool new_assoc =
107                 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
108
109         if (!iwl_is_alive(priv))
110                 return -EBUSY;
111
112         /* always get timestamp with Rx frame */
113         priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
114
115         ret = iwl_check_rxon_cmd(priv);
116         if (ret) {
117                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
118                 return -EINVAL;
119         }
120
121         /*
122          * receive commit_rxon request
123          * abort any previous channel switch if still in process
124          */
125         if (priv->switch_rxon.switch_in_progress &&
126             (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
127                 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
128                       le16_to_cpu(priv->switch_rxon.channel));
129                 priv->switch_rxon.switch_in_progress = false;
130         }
131
132         /* If we don't need to send a full RXON, we can use
133          * iwl_rxon_assoc_cmd which is used to reconfigure filter
134          * and other flags for the current radio configuration. */
135         if (!iwl_full_rxon_required(priv)) {
136                 ret = iwl_send_rxon_assoc(priv);
137                 if (ret) {
138                         IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
139                         return ret;
140                 }
141
142                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
143                 iwl_print_rx_config_cmd(priv);
144                 return 0;
145         }
146
147         /* If we are currently associated and the new config requires
148          * an RXON_ASSOC and the new config wants the associated mask enabled,
149          * we must clear the associated from the active configuration
150          * before we apply the new config */
151         if (iwl_is_associated(priv) && new_assoc) {
152                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
153                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
154
155                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
156                                       sizeof(struct iwl_rxon_cmd),
157                                       &priv->active_rxon);
158
159                 /* If the mask clearing failed then we set
160                  * active_rxon back to what it was previously */
161                 if (ret) {
162                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
163                         IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
164                         return ret;
165                 }
166                 iwl_clear_ucode_stations(priv, false);
167                 iwl_restore_stations(priv);
168         }
169
170         IWL_DEBUG_INFO(priv, "Sending RXON\n"
171                        "* with%s RXON_FILTER_ASSOC_MSK\n"
172                        "* channel = %d\n"
173                        "* bssid = %pM\n",
174                        (new_assoc ? "" : "out"),
175                        le16_to_cpu(priv->staging_rxon.channel),
176                        priv->staging_rxon.bssid_addr);
177
178         iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
179
180         /* Apply the new configuration
181          * RXON unassoc clears the station table in uCode so restoration of
182          * stations is needed after it (the RXON command) completes
183          */
184         if (!new_assoc) {
185                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
186                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
187                 if (ret) {
188                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
189                         return ret;
190                 }
191                 IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON. \n");
192                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
193                 iwl_clear_ucode_stations(priv, false);
194                 iwl_restore_stations(priv);
195         }
196
197         priv->start_calib = 0;
198         if (new_assoc) {
199                 /*
200                  * allow CTS-to-self if possible for new association.
201                  * this is relevant only for 5000 series and up,
202                  * but will not damage 4965
203                  */
204                 priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
205
206                 /* Apply the new configuration
207                  * RXON assoc doesn't clear the station table in uCode,
208                  */
209                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
210                               sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
211                 if (ret) {
212                         IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
213                         return ret;
214                 }
215                 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
216         }
217         iwl_print_rx_config_cmd(priv);
218
219         iwl_init_sensitivity(priv);
220
221         /* If we issue a new RXON command which required a tune then we must
222          * send a new TXPOWER command or we won't be able to Tx any frames */
223         ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
224         if (ret) {
225                 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
226                 return ret;
227         }
228
229         return 0;
230 }
231
232 void iwl_update_chain_flags(struct iwl_priv *priv)
233 {
234
235         if (priv->cfg->ops->hcmd->set_rxon_chain)
236                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
237         iwlcore_commit_rxon(priv);
238 }
239
240 static void iwl_clear_free_frames(struct iwl_priv *priv)
241 {
242         struct list_head *element;
243
244         IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
245                        priv->frames_count);
246
247         while (!list_empty(&priv->free_frames)) {
248                 element = priv->free_frames.next;
249                 list_del(element);
250                 kfree(list_entry(element, struct iwl_frame, list));
251                 priv->frames_count--;
252         }
253
254         if (priv->frames_count) {
255                 IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
256                             priv->frames_count);
257                 priv->frames_count = 0;
258         }
259 }
260
261 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
262 {
263         struct iwl_frame *frame;
264         struct list_head *element;
265         if (list_empty(&priv->free_frames)) {
266                 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
267                 if (!frame) {
268                         IWL_ERR(priv, "Could not allocate frame!\n");
269                         return NULL;
270                 }
271
272                 priv->frames_count++;
273                 return frame;
274         }
275
276         element = priv->free_frames.next;
277         list_del(element);
278         return list_entry(element, struct iwl_frame, list);
279 }
280
281 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
282 {
283         memset(frame, 0, sizeof(*frame));
284         list_add(&frame->list, &priv->free_frames);
285 }
286
287 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
288                                           struct ieee80211_hdr *hdr,
289                                           int left)
290 {
291         if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
292             ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
293              (priv->iw_mode != NL80211_IFTYPE_AP)))
294                 return 0;
295
296         if (priv->ibss_beacon->len > left)
297                 return 0;
298
299         memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
300
301         return priv->ibss_beacon->len;
302 }
303
304 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
305 static void iwl_set_beacon_tim(struct iwl_priv *priv,
306                 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
307                 u8 *beacon, u32 frame_size)
308 {
309         u16 tim_idx;
310         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
311
312         /*
313          * The index is relative to frame start but we start looking at the
314          * variable-length part of the beacon.
315          */
316         tim_idx = mgmt->u.beacon.variable - beacon;
317
318         /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
319         while ((tim_idx < (frame_size - 2)) &&
320                         (beacon[tim_idx] != WLAN_EID_TIM))
321                 tim_idx += beacon[tim_idx+1] + 2;
322
323         /* If TIM field was found, set variables */
324         if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
325                 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
326                 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
327         } else
328                 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
329 }
330
331 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
332                                        struct iwl_frame *frame)
333 {
334         struct iwl_tx_beacon_cmd *tx_beacon_cmd;
335         u32 frame_size;
336         u32 rate_flags;
337         u32 rate;
338         /*
339          * We have to set up the TX command, the TX Beacon command, and the
340          * beacon contents.
341          */
342
343         /* Initialize memory */
344         tx_beacon_cmd = &frame->u.beacon;
345         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
346
347         /* Set up TX beacon contents */
348         frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
349                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
350         if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
351                 return 0;
352
353         /* Set up TX command fields */
354         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
355         tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
356         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
357         tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
358                 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
359
360         /* Set up TX beacon command fields */
361         iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
362                         frame_size);
363
364         /* Set up packet rate and flags */
365         rate = iwl_rate_get_lowest_plcp(priv);
366         priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
367         rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
368         if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
369                 rate_flags |= RATE_MCS_CCK_MSK;
370         tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
371                         rate_flags);
372
373         return sizeof(*tx_beacon_cmd) + frame_size;
374 }
375 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
376 {
377         struct iwl_frame *frame;
378         unsigned int frame_size;
379         int rc;
380
381         frame = iwl_get_free_frame(priv);
382         if (!frame) {
383                 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
384                           "command.\n");
385                 return -ENOMEM;
386         }
387
388         frame_size = iwl_hw_get_beacon_cmd(priv, frame);
389         if (!frame_size) {
390                 IWL_ERR(priv, "Error configuring the beacon command\n");
391                 iwl_free_frame(priv, frame);
392                 return -EINVAL;
393         }
394
395         rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
396                               &frame->u.cmd[0]);
397
398         iwl_free_frame(priv, frame);
399
400         return rc;
401 }
402
403 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
404 {
405         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
406
407         dma_addr_t addr = get_unaligned_le32(&tb->lo);
408         if (sizeof(dma_addr_t) > sizeof(u32))
409                 addr |=
410                 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
411
412         return addr;
413 }
414
415 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
416 {
417         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
418
419         return le16_to_cpu(tb->hi_n_len) >> 4;
420 }
421
422 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
423                                   dma_addr_t addr, u16 len)
424 {
425         struct iwl_tfd_tb *tb = &tfd->tbs[idx];
426         u16 hi_n_len = len << 4;
427
428         put_unaligned_le32(addr, &tb->lo);
429         if (sizeof(dma_addr_t) > sizeof(u32))
430                 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
431
432         tb->hi_n_len = cpu_to_le16(hi_n_len);
433
434         tfd->num_tbs = idx + 1;
435 }
436
437 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
438 {
439         return tfd->num_tbs & 0x1f;
440 }
441
442 /**
443  * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
444  * @priv - driver private data
445  * @txq - tx queue
446  *
447  * Does NOT advance any TFD circular buffer read/write indexes
448  * Does NOT free the TFD itself (which is within circular buffer)
449  */
450 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
451 {
452         struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
453         struct iwl_tfd *tfd;
454         struct pci_dev *dev = priv->pci_dev;
455         int index = txq->q.read_ptr;
456         int i;
457         int num_tbs;
458
459         tfd = &tfd_tmp[index];
460
461         /* Sanity check on number of chunks */
462         num_tbs = iwl_tfd_get_num_tbs(tfd);
463
464         if (num_tbs >= IWL_NUM_OF_TBS) {
465                 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
466                 /* @todo issue fatal error, it is quite serious situation */
467                 return;
468         }
469
470         /* Unmap tx_cmd */
471         if (num_tbs)
472                 pci_unmap_single(dev,
473                                 pci_unmap_addr(&txq->meta[index], mapping),
474                                 pci_unmap_len(&txq->meta[index], len),
475                                 PCI_DMA_BIDIRECTIONAL);
476
477         /* Unmap chunks, if any. */
478         for (i = 1; i < num_tbs; i++) {
479                 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
480                                 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
481
482                 if (txq->txb) {
483                         dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]);
484                         txq->txb[txq->q.read_ptr].skb[i - 1] = NULL;
485                 }
486         }
487 }
488
489 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
490                                  struct iwl_tx_queue *txq,
491                                  dma_addr_t addr, u16 len,
492                                  u8 reset, u8 pad)
493 {
494         struct iwl_queue *q;
495         struct iwl_tfd *tfd, *tfd_tmp;
496         u32 num_tbs;
497
498         q = &txq->q;
499         tfd_tmp = (struct iwl_tfd *)txq->tfds;
500         tfd = &tfd_tmp[q->write_ptr];
501
502         if (reset)
503                 memset(tfd, 0, sizeof(*tfd));
504
505         num_tbs = iwl_tfd_get_num_tbs(tfd);
506
507         /* Each TFD can point to a maximum 20 Tx buffers */
508         if (num_tbs >= IWL_NUM_OF_TBS) {
509                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
510                           IWL_NUM_OF_TBS);
511                 return -EINVAL;
512         }
513
514         BUG_ON(addr & ~DMA_BIT_MASK(36));
515         if (unlikely(addr & ~IWL_TX_DMA_MASK))
516                 IWL_ERR(priv, "Unaligned address = %llx\n",
517                           (unsigned long long)addr);
518
519         iwl_tfd_set_tb(tfd, num_tbs, addr, len);
520
521         return 0;
522 }
523
524 /*
525  * Tell nic where to find circular buffer of Tx Frame Descriptors for
526  * given Tx queue, and enable the DMA channel used for that queue.
527  *
528  * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
529  * channels supported in hardware.
530  */
531 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
532                          struct iwl_tx_queue *txq)
533 {
534         int txq_id = txq->q.id;
535
536         /* Circular buffer (TFD queue in DRAM) physical base address */
537         iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
538                              txq->q.dma_addr >> 8);
539
540         return 0;
541 }
542
543 /******************************************************************************
544  *
545  * Generic RX handler implementations
546  *
547  ******************************************************************************/
548 static void iwl_rx_reply_alive(struct iwl_priv *priv,
549                                 struct iwl_rx_mem_buffer *rxb)
550 {
551         struct iwl_rx_packet *pkt = rxb_addr(rxb);
552         struct iwl_alive_resp *palive;
553         struct delayed_work *pwork;
554
555         palive = &pkt->u.alive_frame;
556
557         IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
558                        "0x%01X 0x%01X\n",
559                        palive->is_valid, palive->ver_type,
560                        palive->ver_subtype);
561
562         if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
563                 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
564                 memcpy(&priv->card_alive_init,
565                        &pkt->u.alive_frame,
566                        sizeof(struct iwl_init_alive_resp));
567                 pwork = &priv->init_alive_start;
568         } else {
569                 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
570                 memcpy(&priv->card_alive, &pkt->u.alive_frame,
571                        sizeof(struct iwl_alive_resp));
572                 pwork = &priv->alive_start;
573         }
574
575         /* We delay the ALIVE response by 5ms to
576          * give the HW RF Kill time to activate... */
577         if (palive->is_valid == UCODE_VALID_OK)
578                 queue_delayed_work(priv->workqueue, pwork,
579                                    msecs_to_jiffies(5));
580         else
581                 IWL_WARN(priv, "uCode did not respond OK.\n");
582 }
583
584 static void iwl_bg_beacon_update(struct work_struct *work)
585 {
586         struct iwl_priv *priv =
587                 container_of(work, struct iwl_priv, beacon_update);
588         struct sk_buff *beacon;
589
590         /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
591         beacon = ieee80211_beacon_get(priv->hw, priv->vif);
592
593         if (!beacon) {
594                 IWL_ERR(priv, "update beacon failed\n");
595                 return;
596         }
597
598         mutex_lock(&priv->mutex);
599         /* new beacon skb is allocated every time; dispose previous.*/
600         if (priv->ibss_beacon)
601                 dev_kfree_skb(priv->ibss_beacon);
602
603         priv->ibss_beacon = beacon;
604         mutex_unlock(&priv->mutex);
605
606         iwl_send_beacon_cmd(priv);
607 }
608
609 /**
610  * iwl_bg_statistics_periodic - Timer callback to queue statistics
611  *
612  * This callback is provided in order to send a statistics request.
613  *
614  * This timer function is continually reset to execute within
615  * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
616  * was received.  We need to ensure we receive the statistics in order
617  * to update the temperature used for calibrating the TXPOWER.
618  */
619 static void iwl_bg_statistics_periodic(unsigned long data)
620 {
621         struct iwl_priv *priv = (struct iwl_priv *)data;
622
623         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
624                 return;
625
626         /* dont send host command if rf-kill is on */
627         if (!iwl_is_ready_rf(priv))
628                 return;
629
630         iwl_send_statistics_request(priv, CMD_ASYNC, false);
631 }
632
633
634 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
635                                         u32 start_idx, u32 num_events,
636                                         u32 mode)
637 {
638         u32 i;
639         u32 ptr;        /* SRAM byte address of log data */
640         u32 ev, time, data; /* event log data */
641         unsigned long reg_flags;
642
643         if (mode == 0)
644                 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
645         else
646                 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
647
648         /* Make sure device is powered up for SRAM reads */
649         spin_lock_irqsave(&priv->reg_lock, reg_flags);
650         if (iwl_grab_nic_access(priv)) {
651                 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
652                 return;
653         }
654
655         /* Set starting address; reads will auto-increment */
656         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
657         rmb();
658
659         /*
660          * "time" is actually "data" for mode 0 (no timestamp).
661          * place event id # at far right for easier visual parsing.
662          */
663         for (i = 0; i < num_events; i++) {
664                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
665                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
666                 if (mode == 0) {
667                         trace_iwlwifi_dev_ucode_cont_event(priv,
668                                                         0, time, ev);
669                 } else {
670                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
671                         trace_iwlwifi_dev_ucode_cont_event(priv,
672                                                 time, data, ev);
673                 }
674         }
675         /* Allow device to power down */
676         iwl_release_nic_access(priv);
677         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
678 }
679
680 static void iwl_continuous_event_trace(struct iwl_priv *priv)
681 {
682         u32 capacity;   /* event log capacity in # entries */
683         u32 base;       /* SRAM byte address of event log header */
684         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
685         u32 num_wraps;  /* # times uCode wrapped to top of log */
686         u32 next_entry; /* index of next entry to be written by uCode */
687
688         if (priv->ucode_type == UCODE_INIT)
689                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
690         else
691                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
692         if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
693                 capacity = iwl_read_targ_mem(priv, base);
694                 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
695                 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
696                 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
697         } else
698                 return;
699
700         if (num_wraps == priv->event_log.num_wraps) {
701                 iwl_print_cont_event_trace(priv,
702                                        base, priv->event_log.next_entry,
703                                        next_entry - priv->event_log.next_entry,
704                                        mode);
705                 priv->event_log.non_wraps_count++;
706         } else {
707                 if ((num_wraps - priv->event_log.num_wraps) > 1)
708                         priv->event_log.wraps_more_count++;
709                 else
710                         priv->event_log.wraps_once_count++;
711                 trace_iwlwifi_dev_ucode_wrap_event(priv,
712                                 num_wraps - priv->event_log.num_wraps,
713                                 next_entry, priv->event_log.next_entry);
714                 if (next_entry < priv->event_log.next_entry) {
715                         iwl_print_cont_event_trace(priv, base,
716                                priv->event_log.next_entry,
717                                capacity - priv->event_log.next_entry,
718                                mode);
719
720                         iwl_print_cont_event_trace(priv, base, 0,
721                                 next_entry, mode);
722                 } else {
723                         iwl_print_cont_event_trace(priv, base,
724                                next_entry, capacity - next_entry,
725                                mode);
726
727                         iwl_print_cont_event_trace(priv, base, 0,
728                                 next_entry, mode);
729                 }
730         }
731         priv->event_log.num_wraps = num_wraps;
732         priv->event_log.next_entry = next_entry;
733 }
734
735 /**
736  * iwl_bg_ucode_trace - Timer callback to log ucode event
737  *
738  * The timer is continually set to execute every
739  * UCODE_TRACE_PERIOD milliseconds after the last timer expired
740  * this function is to perform continuous uCode event logging operation
741  * if enabled
742  */
743 static void iwl_bg_ucode_trace(unsigned long data)
744 {
745         struct iwl_priv *priv = (struct iwl_priv *)data;
746
747         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
748                 return;
749
750         if (priv->event_log.ucode_trace) {
751                 iwl_continuous_event_trace(priv);
752                 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
753                 mod_timer(&priv->ucode_trace,
754                          jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
755         }
756 }
757
758 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
759                                 struct iwl_rx_mem_buffer *rxb)
760 {
761 #ifdef CONFIG_IWLWIFI_DEBUG
762         struct iwl_rx_packet *pkt = rxb_addr(rxb);
763         struct iwl4965_beacon_notif *beacon =
764                 (struct iwl4965_beacon_notif *)pkt->u.raw;
765         u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
766
767         IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
768                 "tsf %d %d rate %d\n",
769                 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
770                 beacon->beacon_notify_hdr.failure_frame,
771                 le32_to_cpu(beacon->ibss_mgr_status),
772                 le32_to_cpu(beacon->high_tsf),
773                 le32_to_cpu(beacon->low_tsf), rate);
774 #endif
775
776         if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
777             (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
778                 queue_work(priv->workqueue, &priv->beacon_update);
779 }
780
781 /* Handle notification from uCode that card's power state is changing
782  * due to software, hardware, or critical temperature RFKILL */
783 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
784                                     struct iwl_rx_mem_buffer *rxb)
785 {
786         struct iwl_rx_packet *pkt = rxb_addr(rxb);
787         u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
788         unsigned long status = priv->status;
789
790         IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
791                           (flags & HW_CARD_DISABLED) ? "Kill" : "On",
792                           (flags & SW_CARD_DISABLED) ? "Kill" : "On",
793                           (flags & CT_CARD_DISABLED) ?
794                           "Reached" : "Not reached");
795
796         if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
797                      CT_CARD_DISABLED)) {
798
799                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
800                             CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
801
802                 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
803                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
804
805                 if (!(flags & RXON_CARD_DISABLED)) {
806                         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
807                                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
808                         iwl_write_direct32(priv, HBUS_TARG_MBX_C,
809                                         HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
810                 }
811                 if (flags & CT_CARD_DISABLED)
812                         iwl_tt_enter_ct_kill(priv);
813         }
814         if (!(flags & CT_CARD_DISABLED))
815                 iwl_tt_exit_ct_kill(priv);
816
817         if (flags & HW_CARD_DISABLED)
818                 set_bit(STATUS_RF_KILL_HW, &priv->status);
819         else
820                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
821
822
823         if (!(flags & RXON_CARD_DISABLED))
824                 iwl_scan_cancel(priv);
825
826         if ((test_bit(STATUS_RF_KILL_HW, &status) !=
827              test_bit(STATUS_RF_KILL_HW, &priv->status)))
828                 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
829                         test_bit(STATUS_RF_KILL_HW, &priv->status));
830         else
831                 wake_up_interruptible(&priv->wait_command_queue);
832 }
833
834 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
835 {
836         if (src == IWL_PWR_SRC_VAUX) {
837                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
838                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
839                                                APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
840                                                ~APMG_PS_CTRL_MSK_PWR_SRC);
841         } else {
842                 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
843                                        APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
844                                        ~APMG_PS_CTRL_MSK_PWR_SRC);
845         }
846
847         return 0;
848 }
849
850 /**
851  * iwl_setup_rx_handlers - Initialize Rx handler callbacks
852  *
853  * Setup the RX handlers for each of the reply types sent from the uCode
854  * to the host.
855  *
856  * This function chains into the hardware specific files for them to setup
857  * any hardware specific handlers as well.
858  */
859 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
860 {
861         priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
862         priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
863         priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
864         priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
865                         iwl_rx_spectrum_measure_notif;
866         priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
867         priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
868             iwl_rx_pm_debug_statistics_notif;
869         priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
870
871         /*
872          * The same handler is used for both the REPLY to a discrete
873          * statistics request from the host as well as for the periodic
874          * statistics notifications (after received beacons) from the uCode.
875          */
876         priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
877         priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
878
879         iwl_setup_rx_scan_handlers(priv);
880
881         /* status change handler */
882         priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
883
884         priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
885             iwl_rx_missed_beacon_notif;
886         /* Rx handlers */
887         priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
888         priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
889         /* block ack */
890         priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl_rx_reply_compressed_ba;
891         /* Set up hardware specific Rx handlers */
892         priv->cfg->ops->lib->rx_handler_setup(priv);
893 }
894
895 /**
896  * iwl_rx_handle - Main entry function for receiving responses from uCode
897  *
898  * Uses the priv->rx_handlers callback function array to invoke
899  * the appropriate handlers, including command responses,
900  * frame-received notifications, and other notifications.
901  */
902 void iwl_rx_handle(struct iwl_priv *priv)
903 {
904         struct iwl_rx_mem_buffer *rxb;
905         struct iwl_rx_packet *pkt;
906         struct iwl_rx_queue *rxq = &priv->rxq;
907         u32 r, i;
908         int reclaim;
909         unsigned long flags;
910         u8 fill_rx = 0;
911         u32 count = 8;
912         int total_empty;
913
914         /* uCode's read index (stored in shared DRAM) indicates the last Rx
915          * buffer that the driver may process (last buffer filled by ucode). */
916         r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
917         i = rxq->read;
918
919         /* Rx interrupt, but nothing sent from uCode */
920         if (i == r)
921                 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
922
923         /* calculate total frames need to be restock after handling RX */
924         total_empty = r - rxq->write_actual;
925         if (total_empty < 0)
926                 total_empty += RX_QUEUE_SIZE;
927
928         if (total_empty > (RX_QUEUE_SIZE / 2))
929                 fill_rx = 1;
930
931         while (i != r) {
932                 rxb = rxq->queue[i];
933
934                 /* If an RXB doesn't have a Rx queue slot associated with it,
935                  * then a bug has been introduced in the queue refilling
936                  * routines -- catch it here */
937                 BUG_ON(rxb == NULL);
938
939                 rxq->queue[i] = NULL;
940
941                 pci_unmap_page(priv->pci_dev, rxb->page_dma,
942                                PAGE_SIZE << priv->hw_params.rx_page_order,
943                                PCI_DMA_FROMDEVICE);
944                 pkt = rxb_addr(rxb);
945
946                 trace_iwlwifi_dev_rx(priv, pkt,
947                         le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
948
949                 /* Reclaim a command buffer only if this packet is a response
950                  *   to a (driver-originated) command.
951                  * If the packet (e.g. Rx frame) originated from uCode,
952                  *   there is no command buffer to reclaim.
953                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
954                  *   but apparently a few don't get set; catch them here. */
955                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
956                         (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
957                         (pkt->hdr.cmd != REPLY_RX) &&
958                         (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
959                         (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
960                         (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
961                         (pkt->hdr.cmd != REPLY_TX);
962
963                 /* Based on type of command response or notification,
964                  *   handle those that need handling via function in
965                  *   rx_handlers table.  See iwl_setup_rx_handlers() */
966                 if (priv->rx_handlers[pkt->hdr.cmd]) {
967                         IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
968                                 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
969                         priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
970                         priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
971                 } else {
972                         /* No handling needed */
973                         IWL_DEBUG_RX(priv,
974                                 "r %d i %d No handler needed for %s, 0x%02x\n",
975                                 r, i, get_cmd_string(pkt->hdr.cmd),
976                                 pkt->hdr.cmd);
977                 }
978
979                 /*
980                  * XXX: After here, we should always check rxb->page
981                  * against NULL before touching it or its virtual
982                  * memory (pkt). Because some rx_handler might have
983                  * already taken or freed the pages.
984                  */
985
986                 if (reclaim) {
987                         /* Invoke any callbacks, transfer the buffer to caller,
988                          * and fire off the (possibly) blocking iwl_send_cmd()
989                          * as we reclaim the driver command queue */
990                         if (rxb->page)
991                                 iwl_tx_cmd_complete(priv, rxb);
992                         else
993                                 IWL_WARN(priv, "Claim null rxb?\n");
994                 }
995
996                 /* Reuse the page if possible. For notification packets and
997                  * SKBs that fail to Rx correctly, add them back into the
998                  * rx_free list for reuse later. */
999                 spin_lock_irqsave(&rxq->lock, flags);
1000                 if (rxb->page != NULL) {
1001                         rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1002                                 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1003                                 PCI_DMA_FROMDEVICE);
1004                         list_add_tail(&rxb->list, &rxq->rx_free);
1005                         rxq->free_count++;
1006                 } else
1007                         list_add_tail(&rxb->list, &rxq->rx_used);
1008
1009                 spin_unlock_irqrestore(&rxq->lock, flags);
1010
1011                 i = (i + 1) & RX_QUEUE_MASK;
1012                 /* If there are a lot of unused frames,
1013                  * restock the Rx queue so ucode wont assert. */
1014                 if (fill_rx) {
1015                         count++;
1016                         if (count >= 8) {
1017                                 rxq->read = i;
1018                                 iwl_rx_replenish_now(priv);
1019                                 count = 0;
1020                         }
1021                 }
1022         }
1023
1024         /* Backtrack one entry */
1025         rxq->read = i;
1026         if (fill_rx)
1027                 iwl_rx_replenish_now(priv);
1028         else
1029                 iwl_rx_queue_restock(priv);
1030 }
1031
1032 /* call this function to flush any scheduled tasklet */
1033 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1034 {
1035         /* wait to make sure we flush pending tasklet*/
1036         synchronize_irq(priv->pci_dev->irq);
1037         tasklet_kill(&priv->irq_tasklet);
1038 }
1039
1040 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1041 {
1042         u32 inta, handled = 0;
1043         u32 inta_fh;
1044         unsigned long flags;
1045         u32 i;
1046 #ifdef CONFIG_IWLWIFI_DEBUG
1047         u32 inta_mask;
1048 #endif
1049
1050         spin_lock_irqsave(&priv->lock, flags);
1051
1052         /* Ack/clear/reset pending uCode interrupts.
1053          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1054          *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
1055         inta = iwl_read32(priv, CSR_INT);
1056         iwl_write32(priv, CSR_INT, inta);
1057
1058         /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1059          * Any new interrupts that happen after this, either while we're
1060          * in this tasklet, or later, will show up in next ISR/tasklet. */
1061         inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1062         iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1063
1064 #ifdef CONFIG_IWLWIFI_DEBUG
1065         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1066                 /* just for debug */
1067                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1068                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1069                               inta, inta_mask, inta_fh);
1070         }
1071 #endif
1072
1073         spin_unlock_irqrestore(&priv->lock, flags);
1074
1075         /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1076          * atomic, make sure that inta covers all the interrupts that
1077          * we've discovered, even if FH interrupt came in just after
1078          * reading CSR_INT. */
1079         if (inta_fh & CSR49_FH_INT_RX_MASK)
1080                 inta |= CSR_INT_BIT_FH_RX;
1081         if (inta_fh & CSR49_FH_INT_TX_MASK)
1082                 inta |= CSR_INT_BIT_FH_TX;
1083
1084         /* Now service all interrupt bits discovered above. */
1085         if (inta & CSR_INT_BIT_HW_ERR) {
1086                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1087
1088                 /* Tell the device to stop sending interrupts */
1089                 iwl_disable_interrupts(priv);
1090
1091                 priv->isr_stats.hw++;
1092                 iwl_irq_handle_error(priv);
1093
1094                 handled |= CSR_INT_BIT_HW_ERR;
1095
1096                 return;
1097         }
1098
1099 #ifdef CONFIG_IWLWIFI_DEBUG
1100         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1101                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1102                 if (inta & CSR_INT_BIT_SCD) {
1103                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1104                                       "the frame/frames.\n");
1105                         priv->isr_stats.sch++;
1106                 }
1107
1108                 /* Alive notification via Rx interrupt will do the real work */
1109                 if (inta & CSR_INT_BIT_ALIVE) {
1110                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1111                         priv->isr_stats.alive++;
1112                 }
1113         }
1114 #endif
1115         /* Safely ignore these bits for debug checks below */
1116         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1117
1118         /* HW RF KILL switch toggled */
1119         if (inta & CSR_INT_BIT_RF_KILL) {
1120                 int hw_rf_kill = 0;
1121                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1122                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1123                         hw_rf_kill = 1;
1124
1125                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1126                                 hw_rf_kill ? "disable radio" : "enable radio");
1127
1128                 priv->isr_stats.rfkill++;
1129
1130                 /* driver only loads ucode once setting the interface up.
1131                  * the driver allows loading the ucode even if the radio
1132                  * is killed. Hence update the killswitch state here. The
1133                  * rfkill handler will care about restarting if needed.
1134                  */
1135                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1136                         if (hw_rf_kill)
1137                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1138                         else
1139                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1140                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1141                 }
1142
1143                 handled |= CSR_INT_BIT_RF_KILL;
1144         }
1145
1146         /* Chip got too hot and stopped itself */
1147         if (inta & CSR_INT_BIT_CT_KILL) {
1148                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1149                 priv->isr_stats.ctkill++;
1150                 handled |= CSR_INT_BIT_CT_KILL;
1151         }
1152
1153         /* Error detected by uCode */
1154         if (inta & CSR_INT_BIT_SW_ERR) {
1155                 IWL_ERR(priv, "Microcode SW error detected. "
1156                         " Restarting 0x%X.\n", inta);
1157                 priv->isr_stats.sw++;
1158                 priv->isr_stats.sw_err = inta;
1159                 iwl_irq_handle_error(priv);
1160                 handled |= CSR_INT_BIT_SW_ERR;
1161         }
1162
1163         /*
1164          * uCode wakes up after power-down sleep.
1165          * Tell device about any new tx or host commands enqueued,
1166          * and about any Rx buffers made available while asleep.
1167          */
1168         if (inta & CSR_INT_BIT_WAKEUP) {
1169                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1170                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1171                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1172                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1173                 priv->isr_stats.wakeup++;
1174                 handled |= CSR_INT_BIT_WAKEUP;
1175         }
1176
1177         /* All uCode command responses, including Tx command responses,
1178          * Rx "responses" (frame-received notification), and other
1179          * notifications from uCode come through here*/
1180         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1181                 iwl_rx_handle(priv);
1182                 priv->isr_stats.rx++;
1183                 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1184         }
1185
1186         /* This "Tx" DMA channel is used only for loading uCode */
1187         if (inta & CSR_INT_BIT_FH_TX) {
1188                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1189                 priv->isr_stats.tx++;
1190                 handled |= CSR_INT_BIT_FH_TX;
1191                 /* Wake up uCode load routine, now that load is complete */
1192                 priv->ucode_write_complete = 1;
1193                 wake_up_interruptible(&priv->wait_command_queue);
1194         }
1195
1196         if (inta & ~handled) {
1197                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1198                 priv->isr_stats.unhandled++;
1199         }
1200
1201         if (inta & ~(priv->inta_mask)) {
1202                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1203                          inta & ~priv->inta_mask);
1204                 IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
1205         }
1206
1207         /* Re-enable all interrupts */
1208         /* only Re-enable if diabled by irq */
1209         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1210                 iwl_enable_interrupts(priv);
1211
1212 #ifdef CONFIG_IWLWIFI_DEBUG
1213         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1214                 inta = iwl_read32(priv, CSR_INT);
1215                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1216                 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1217                 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1218                         "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1219         }
1220 #endif
1221 }
1222
1223 /* tasklet for iwlagn interrupt */
1224 static void iwl_irq_tasklet(struct iwl_priv *priv)
1225 {
1226         u32 inta = 0;
1227         u32 handled = 0;
1228         unsigned long flags;
1229         u32 i;
1230 #ifdef CONFIG_IWLWIFI_DEBUG
1231         u32 inta_mask;
1232 #endif
1233
1234         spin_lock_irqsave(&priv->lock, flags);
1235
1236         /* Ack/clear/reset pending uCode interrupts.
1237          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1238          */
1239         iwl_write32(priv, CSR_INT, priv->_agn.inta);
1240
1241         inta = priv->_agn.inta;
1242
1243 #ifdef CONFIG_IWLWIFI_DEBUG
1244         if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1245                 /* just for debug */
1246                 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1247                 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1248                                 inta, inta_mask);
1249         }
1250 #endif
1251
1252         spin_unlock_irqrestore(&priv->lock, flags);
1253
1254         /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1255         priv->_agn.inta = 0;
1256
1257         /* Now service all interrupt bits discovered above. */
1258         if (inta & CSR_INT_BIT_HW_ERR) {
1259                 IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
1260
1261                 /* Tell the device to stop sending interrupts */
1262                 iwl_disable_interrupts(priv);
1263
1264                 priv->isr_stats.hw++;
1265                 iwl_irq_handle_error(priv);
1266
1267                 handled |= CSR_INT_BIT_HW_ERR;
1268
1269                 return;
1270         }
1271
1272 #ifdef CONFIG_IWLWIFI_DEBUG
1273         if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1274                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1275                 if (inta & CSR_INT_BIT_SCD) {
1276                         IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1277                                       "the frame/frames.\n");
1278                         priv->isr_stats.sch++;
1279                 }
1280
1281                 /* Alive notification via Rx interrupt will do the real work */
1282                 if (inta & CSR_INT_BIT_ALIVE) {
1283                         IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1284                         priv->isr_stats.alive++;
1285                 }
1286         }
1287 #endif
1288         /* Safely ignore these bits for debug checks below */
1289         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1290
1291         /* HW RF KILL switch toggled */
1292         if (inta & CSR_INT_BIT_RF_KILL) {
1293                 int hw_rf_kill = 0;
1294                 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1295                                 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1296                         hw_rf_kill = 1;
1297
1298                 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1299                                 hw_rf_kill ? "disable radio" : "enable radio");
1300
1301                 priv->isr_stats.rfkill++;
1302
1303                 /* driver only loads ucode once setting the interface up.
1304                  * the driver allows loading the ucode even if the radio
1305                  * is killed. Hence update the killswitch state here. The
1306                  * rfkill handler will care about restarting if needed.
1307                  */
1308                 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1309                         if (hw_rf_kill)
1310                                 set_bit(STATUS_RF_KILL_HW, &priv->status);
1311                         else
1312                                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1313                         wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1314                 }
1315
1316                 handled |= CSR_INT_BIT_RF_KILL;
1317         }
1318
1319         /* Chip got too hot and stopped itself */
1320         if (inta & CSR_INT_BIT_CT_KILL) {
1321                 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1322                 priv->isr_stats.ctkill++;
1323                 handled |= CSR_INT_BIT_CT_KILL;
1324         }
1325
1326         /* Error detected by uCode */
1327         if (inta & CSR_INT_BIT_SW_ERR) {
1328                 IWL_ERR(priv, "Microcode SW error detected. "
1329                         " Restarting 0x%X.\n", inta);
1330                 priv->isr_stats.sw++;
1331                 priv->isr_stats.sw_err = inta;
1332                 iwl_irq_handle_error(priv);
1333                 handled |= CSR_INT_BIT_SW_ERR;
1334         }
1335
1336         /* uCode wakes up after power-down sleep */
1337         if (inta & CSR_INT_BIT_WAKEUP) {
1338                 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1339                 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1340                 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1341                         iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1342
1343                 priv->isr_stats.wakeup++;
1344
1345                 handled |= CSR_INT_BIT_WAKEUP;
1346         }
1347
1348         /* All uCode command responses, including Tx command responses,
1349          * Rx "responses" (frame-received notification), and other
1350          * notifications from uCode come through here*/
1351         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1352                         CSR_INT_BIT_RX_PERIODIC)) {
1353                 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1354                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1355                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1356                         iwl_write32(priv, CSR_FH_INT_STATUS,
1357                                         CSR49_FH_INT_RX_MASK);
1358                 }
1359                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1360                         handled |= CSR_INT_BIT_RX_PERIODIC;
1361                         iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1362                 }
1363                 /* Sending RX interrupt require many steps to be done in the
1364                  * the device:
1365                  * 1- write interrupt to current index in ICT table.
1366                  * 2- dma RX frame.
1367                  * 3- update RX shared data to indicate last write index.
1368                  * 4- send interrupt.
1369                  * This could lead to RX race, driver could receive RX interrupt
1370                  * but the shared data changes does not reflect this;
1371                  * periodic interrupt will detect any dangling Rx activity.
1372                  */
1373
1374                 /* Disable periodic interrupt; we use it as just a one-shot. */
1375                 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1376                             CSR_INT_PERIODIC_DIS);
1377                 iwl_rx_handle(priv);
1378
1379                 /*
1380                  * Enable periodic interrupt in 8 msec only if we received
1381                  * real RX interrupt (instead of just periodic int), to catch
1382                  * any dangling Rx interrupt.  If it was just the periodic
1383                  * interrupt, there was no dangling Rx activity, and no need
1384                  * to extend the periodic interrupt; one-shot is enough.
1385                  */
1386                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1387                         iwl_write8(priv, CSR_INT_PERIODIC_REG,
1388                                     CSR_INT_PERIODIC_ENA);
1389
1390                 priv->isr_stats.rx++;
1391         }
1392
1393         /* This "Tx" DMA channel is used only for loading uCode */
1394         if (inta & CSR_INT_BIT_FH_TX) {
1395                 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1396                 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1397                 priv->isr_stats.tx++;
1398                 handled |= CSR_INT_BIT_FH_TX;
1399                 /* Wake up uCode load routine, now that load is complete */
1400                 priv->ucode_write_complete = 1;
1401                 wake_up_interruptible(&priv->wait_command_queue);
1402         }
1403
1404         if (inta & ~handled) {
1405                 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1406                 priv->isr_stats.unhandled++;
1407         }
1408
1409         if (inta & ~(priv->inta_mask)) {
1410                 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1411                          inta & ~priv->inta_mask);
1412         }
1413
1414         /* Re-enable all interrupts */
1415         /* only Re-enable if diabled by irq */
1416         if (test_bit(STATUS_INT_ENABLED, &priv->status))
1417                 iwl_enable_interrupts(priv);
1418 }
1419
1420
1421 /******************************************************************************
1422  *
1423  * uCode download functions
1424  *
1425  ******************************************************************************/
1426
1427 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1428 {
1429         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1430         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1431         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1432         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1433         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1434         iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1435 }
1436
1437 static void iwl_nic_start(struct iwl_priv *priv)
1438 {
1439         /* Remove all resets to allow NIC to operate */
1440         iwl_write32(priv, CSR_RESET, 0);
1441 }
1442
1443
1444 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1445 static int iwl_mac_setup_register(struct iwl_priv *priv);
1446
1447 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1448 {
1449         const char *name_pre = priv->cfg->fw_name_pre;
1450
1451         if (first)
1452                 priv->fw_index = priv->cfg->ucode_api_max;
1453         else
1454                 priv->fw_index--;
1455
1456         if (priv->fw_index < priv->cfg->ucode_api_min) {
1457                 IWL_ERR(priv, "no suitable firmware found!\n");
1458                 return -ENOENT;
1459         }
1460
1461         sprintf(priv->firmware_name, "%s%d%s",
1462                 name_pre, priv->fw_index, ".ucode");
1463
1464         IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1465                        priv->firmware_name);
1466
1467         return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1468                                        &priv->pci_dev->dev, GFP_KERNEL, priv,
1469                                        iwl_ucode_callback);
1470 }
1471
1472 /**
1473  * iwl_ucode_callback - callback when firmware was loaded
1474  *
1475  * If loaded successfully, copies the firmware into buffers
1476  * for the card to fetch (via DMA).
1477  */
1478 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1479 {
1480         struct iwl_priv *priv = context;
1481         struct iwl_ucode_header *ucode;
1482         const unsigned int api_max = priv->cfg->ucode_api_max;
1483         const unsigned int api_min = priv->cfg->ucode_api_min;
1484         u8 *src;
1485         size_t len;
1486         u32 api_ver, build;
1487         u32 inst_size, data_size, init_size, init_data_size, boot_size;
1488         int err;
1489         u16 eeprom_ver;
1490
1491         if (!ucode_raw) {
1492                 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1493                         priv->firmware_name);
1494                 goto try_again;
1495         }
1496
1497         IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1498                        priv->firmware_name, ucode_raw->size);
1499
1500         /* Make sure that we got at least the v1 header! */
1501         if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
1502                 IWL_ERR(priv, "File size way too small!\n");
1503                 goto try_again;
1504         }
1505
1506         /* Data from ucode file:  header followed by uCode images */
1507         ucode = (struct iwl_ucode_header *)ucode_raw->data;
1508
1509         priv->ucode_ver = le32_to_cpu(ucode->ver);
1510         api_ver = IWL_UCODE_API(priv->ucode_ver);
1511         build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
1512         inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
1513         data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
1514         init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
1515         init_data_size =
1516                 priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
1517         boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
1518         src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
1519
1520         /* api_ver should match the api version forming part of the
1521          * firmware filename ... but we don't check for that and only rely
1522          * on the API version read from firmware header from here on forward */
1523
1524         if (api_ver < api_min || api_ver > api_max) {
1525                 IWL_ERR(priv, "Driver unable to support your firmware API. "
1526                           "Driver supports v%u, firmware is v%u.\n",
1527                           api_max, api_ver);
1528                 goto try_again;
1529         }
1530
1531         if (api_ver != api_max)
1532                 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
1533                           "got v%u. New firmware can be obtained "
1534                           "from http://www.intellinuxwireless.org.\n",
1535                           api_max, api_ver);
1536
1537         IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
1538                IWL_UCODE_MAJOR(priv->ucode_ver),
1539                IWL_UCODE_MINOR(priv->ucode_ver),
1540                IWL_UCODE_API(priv->ucode_ver),
1541                IWL_UCODE_SERIAL(priv->ucode_ver));
1542
1543         snprintf(priv->hw->wiphy->fw_version,
1544                  sizeof(priv->hw->wiphy->fw_version),
1545                  "%u.%u.%u.%u",
1546                  IWL_UCODE_MAJOR(priv->ucode_ver),
1547                  IWL_UCODE_MINOR(priv->ucode_ver),
1548                  IWL_UCODE_API(priv->ucode_ver),
1549                  IWL_UCODE_SERIAL(priv->ucode_ver));
1550
1551         if (build)
1552                 IWL_DEBUG_INFO(priv, "Build %u\n", build);
1553
1554         eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
1555         IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
1556                        (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
1557                        ? "OTP" : "EEPROM", eeprom_ver);
1558
1559         IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1560                        priv->ucode_ver);
1561         IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
1562                        inst_size);
1563         IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
1564                        data_size);
1565         IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
1566                        init_size);
1567         IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
1568                        init_data_size);
1569         IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
1570                        boot_size);
1571
1572         /*
1573          * For any of the failures below (before allocating pci memory)
1574          * we will try to load a version with a smaller API -- maybe the
1575          * user just got a corrupted version of the latest API.
1576          */
1577
1578         /* Verify size of file vs. image size info in file's header */
1579         if (ucode_raw->size !=
1580                 priv->cfg->ops->ucode->get_header_size(api_ver) +
1581                 inst_size + data_size + init_size +
1582                 init_data_size + boot_size) {
1583
1584                 IWL_DEBUG_INFO(priv,
1585                         "uCode file size %d does not match expected size\n",
1586                         (int)ucode_raw->size);
1587                 goto try_again;
1588         }
1589
1590         /* Verify that uCode images will fit in card's SRAM */
1591         if (inst_size > priv->hw_params.max_inst_size) {
1592                 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
1593                                inst_size);
1594                 goto try_again;
1595         }
1596
1597         if (data_size > priv->hw_params.max_data_size) {
1598                 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
1599                                 data_size);
1600                 goto try_again;
1601         }
1602         if (init_size > priv->hw_params.max_inst_size) {
1603                 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
1604                         init_size);
1605                 goto try_again;
1606         }
1607         if (init_data_size > priv->hw_params.max_data_size) {
1608                 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
1609                       init_data_size);
1610                 goto try_again;
1611         }
1612         if (boot_size > priv->hw_params.max_bsm_size) {
1613                 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
1614                         boot_size);
1615                 goto try_again;
1616         }
1617
1618         /* Allocate ucode buffers for card's bus-master loading ... */
1619
1620         /* Runtime instructions and 2 copies of data:
1621          * 1) unmodified from disk
1622          * 2) backup cache for save/restore during power-downs */
1623         priv->ucode_code.len = inst_size;
1624         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
1625
1626         priv->ucode_data.len = data_size;
1627         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
1628
1629         priv->ucode_data_backup.len = data_size;
1630         iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1631
1632         if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
1633             !priv->ucode_data_backup.v_addr)
1634                 goto err_pci_alloc;
1635
1636         /* Initialization instructions and data */
1637         if (init_size && init_data_size) {
1638                 priv->ucode_init.len = init_size;
1639                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
1640
1641                 priv->ucode_init_data.len = init_data_size;
1642                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1643
1644                 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
1645                         goto err_pci_alloc;
1646         }
1647
1648         /* Bootstrap (instructions only, no data) */
1649         if (boot_size) {
1650                 priv->ucode_boot.len = boot_size;
1651                 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
1652
1653                 if (!priv->ucode_boot.v_addr)
1654                         goto err_pci_alloc;
1655         }
1656
1657         /* Copy images into buffers for card's bus-master reads ... */
1658
1659         /* Runtime instructions (first block of data in file) */
1660         len = inst_size;
1661         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
1662         memcpy(priv->ucode_code.v_addr, src, len);
1663         src += len;
1664
1665         IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1666                 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
1667
1668         /* Runtime data (2nd block)
1669          * NOTE:  Copy into backup buffer will be done in iwl_up()  */
1670         len = data_size;
1671         IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
1672         memcpy(priv->ucode_data.v_addr, src, len);
1673         memcpy(priv->ucode_data_backup.v_addr, src, len);
1674         src += len;
1675
1676         /* Initialization instructions (3rd block) */
1677         if (init_size) {
1678                 len = init_size;
1679                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
1680                                 len);
1681                 memcpy(priv->ucode_init.v_addr, src, len);
1682                 src += len;
1683         }
1684
1685         /* Initialization data (4th block) */
1686         if (init_data_size) {
1687                 len = init_data_size;
1688                 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
1689                                len);
1690                 memcpy(priv->ucode_init_data.v_addr, src, len);
1691                 src += len;
1692         }
1693
1694         /* Bootstrap instructions (5th block) */
1695         len = boot_size;
1696         IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
1697         memcpy(priv->ucode_boot.v_addr, src, len);
1698
1699         /**************************************************
1700          * This is still part of probe() in a sense...
1701          *
1702          * 9. Setup and register with mac80211 and debugfs
1703          **************************************************/
1704         err = iwl_mac_setup_register(priv);
1705         if (err)
1706                 goto out_unbind;
1707
1708         err = iwl_dbgfs_register(priv, DRV_NAME);
1709         if (err)
1710                 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1711
1712         /* We have our copies now, allow OS release its copies */
1713         release_firmware(ucode_raw);
1714         return;
1715
1716  try_again:
1717         /* try next, if any */
1718         if (iwl_request_firmware(priv, false))
1719                 goto out_unbind;
1720         release_firmware(ucode_raw);
1721         return;
1722
1723  err_pci_alloc:
1724         IWL_ERR(priv, "failed to allocate pci memory\n");
1725         iwl_dealloc_ucode_pci(priv);
1726  out_unbind:
1727         device_release_driver(&priv->pci_dev->dev);
1728         release_firmware(ucode_raw);
1729 }
1730
1731 static const char *desc_lookup_text[] = {
1732         "OK",
1733         "FAIL",
1734         "BAD_PARAM",
1735         "BAD_CHECKSUM",
1736         "NMI_INTERRUPT_WDG",
1737         "SYSASSERT",
1738         "FATAL_ERROR",
1739         "BAD_COMMAND",
1740         "HW_ERROR_TUNE_LOCK",
1741         "HW_ERROR_TEMPERATURE",
1742         "ILLEGAL_CHAN_FREQ",
1743         "VCC_NOT_STABLE",
1744         "FH_ERROR",
1745         "NMI_INTERRUPT_HOST",
1746         "NMI_INTERRUPT_ACTION_PT",
1747         "NMI_INTERRUPT_UNKNOWN",
1748         "UCODE_VERSION_MISMATCH",
1749         "HW_ERROR_ABS_LOCK",
1750         "HW_ERROR_CAL_LOCK_FAIL",
1751         "NMI_INTERRUPT_INST_ACTION_PT",
1752         "NMI_INTERRUPT_DATA_ACTION_PT",
1753         "NMI_TRM_HW_ER",
1754         "NMI_INTERRUPT_TRM",
1755         "NMI_INTERRUPT_BREAK_POINT"
1756         "DEBUG_0",
1757         "DEBUG_1",
1758         "DEBUG_2",
1759         "DEBUG_3",
1760         "ADVANCED SYSASSERT"
1761 };
1762
1763 static const char *desc_lookup(int i)
1764 {
1765         int max = ARRAY_SIZE(desc_lookup_text) - 1;
1766
1767         if (i < 0 || i > max)
1768                 i = max;
1769
1770         return desc_lookup_text[i];
1771 }
1772
1773 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1774 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1775
1776 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1777 {
1778         u32 data2, line;
1779         u32 desc, time, count, base, data1;
1780         u32 blink1, blink2, ilink1, ilink2;
1781
1782         if (priv->ucode_type == UCODE_INIT)
1783                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1784         else
1785                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1786
1787         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1788                 IWL_ERR(priv,
1789                         "Not valid error log pointer 0x%08X for %s uCode\n",
1790                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1791                 return;
1792         }
1793
1794         count = iwl_read_targ_mem(priv, base);
1795
1796         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1797                 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1798                 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1799                         priv->status, count);
1800         }
1801
1802         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1803         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1804         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1805         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1806         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1807         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1808         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1809         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1810         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1811
1812         trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
1813                                       blink1, blink2, ilink1, ilink2);
1814
1815         IWL_ERR(priv, "Desc                               Time       "
1816                 "data1      data2      line\n");
1817         IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1818                 desc_lookup(desc), desc, time, data1, data2, line);
1819         IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
1820         IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
1821                 ilink1, ilink2);
1822
1823 }
1824
1825 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1826
1827 /**
1828  * iwl_print_event_log - Dump error event log to syslog
1829  *
1830  */
1831 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1832                                u32 num_events, u32 mode,
1833                                int pos, char **buf, size_t bufsz)
1834 {
1835         u32 i;
1836         u32 base;       /* SRAM byte address of event log header */
1837         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1838         u32 ptr;        /* SRAM byte address of log data */
1839         u32 ev, time, data; /* event log data */
1840         unsigned long reg_flags;
1841
1842         if (num_events == 0)
1843                 return pos;
1844         if (priv->ucode_type == UCODE_INIT)
1845                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1846         else
1847                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1848
1849         if (mode == 0)
1850                 event_size = 2 * sizeof(u32);
1851         else
1852                 event_size = 3 * sizeof(u32);
1853
1854         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1855
1856         /* Make sure device is powered up for SRAM reads */
1857         spin_lock_irqsave(&priv->reg_lock, reg_flags);
1858         iwl_grab_nic_access(priv);
1859
1860         /* Set starting address; reads will auto-increment */
1861         _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
1862         rmb();
1863
1864         /* "time" is actually "data" for mode 0 (no timestamp).
1865         * place event id # at far right for easier visual parsing. */
1866         for (i = 0; i < num_events; i++) {
1867                 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1868                 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1869                 if (mode == 0) {
1870                         /* data, ev */
1871                         if (bufsz) {
1872                                 pos += scnprintf(*buf + pos, bufsz - pos,
1873                                                 "EVT_LOG:0x%08x:%04u\n",
1874                                                 time, ev);
1875                         } else {
1876                                 trace_iwlwifi_dev_ucode_event(priv, 0,
1877                                         time, ev);
1878                                 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1879                                         time, ev);
1880                         }
1881                 } else {
1882                         data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1883                         if (bufsz) {
1884                                 pos += scnprintf(*buf + pos, bufsz - pos,
1885                                                 "EVT_LOGT:%010u:0x%08x:%04u\n",
1886                                                  time, data, ev);
1887                         } else {
1888                                 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1889                                         time, data, ev);
1890                                 trace_iwlwifi_dev_ucode_event(priv, time,
1891                                         data, ev);
1892                         }
1893                 }
1894         }
1895
1896         /* Allow device to power down */
1897         iwl_release_nic_access(priv);
1898         spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1899         return pos;
1900 }
1901
1902 /**
1903  * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1904  */
1905 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1906                                     u32 num_wraps, u32 next_entry,
1907                                     u32 size, u32 mode,
1908                                     int pos, char **buf, size_t bufsz)
1909 {
1910         /*
1911          * display the newest DEFAULT_LOG_ENTRIES entries
1912          * i.e the entries just before the next ont that uCode would fill.
1913          */
1914         if (num_wraps) {
1915                 if (next_entry < size) {
1916                         pos = iwl_print_event_log(priv,
1917                                                 capacity - (size - next_entry),
1918                                                 size - next_entry, mode,
1919                                                 pos, buf, bufsz);
1920                         pos = iwl_print_event_log(priv, 0,
1921                                                   next_entry, mode,
1922                                                   pos, buf, bufsz);
1923                 } else
1924                         pos = iwl_print_event_log(priv, next_entry - size,
1925                                                   size, mode, pos, buf, bufsz);
1926         } else {
1927                 if (next_entry < size) {
1928                         pos = iwl_print_event_log(priv, 0, next_entry,
1929                                                   mode, pos, buf, bufsz);
1930                 } else {
1931                         pos = iwl_print_event_log(priv, next_entry - size,
1932                                                   size, mode, pos, buf, bufsz);
1933                 }
1934         }
1935         return pos;
1936 }
1937
1938 /* For sanity check only.  Actual size is determined by uCode, typ. 512 */
1939 #define MAX_EVENT_LOG_SIZE (512)
1940
1941 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1942
1943 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
1944                             char **buf, bool display)
1945 {
1946         u32 base;       /* SRAM byte address of event log header */
1947         u32 capacity;   /* event log capacity in # entries */
1948         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
1949         u32 num_wraps;  /* # times uCode wrapped to top of log */
1950         u32 next_entry; /* index of next entry to be written by uCode */
1951         u32 size;       /* # entries that we'll print */
1952         int pos = 0;
1953         size_t bufsz = 0;
1954
1955         if (priv->ucode_type == UCODE_INIT)
1956                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1957         else
1958                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1959
1960         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1961                 IWL_ERR(priv,
1962                         "Invalid event log pointer 0x%08X for %s uCode\n",
1963                         base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1964                 return -EINVAL;
1965         }
1966
1967         /* event log header */
1968         capacity = iwl_read_targ_mem(priv, base);
1969         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1970         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1971         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1972
1973         if (capacity > MAX_EVENT_LOG_SIZE) {
1974                 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
1975                         capacity, MAX_EVENT_LOG_SIZE);
1976                 capacity = MAX_EVENT_LOG_SIZE;
1977         }
1978
1979         if (next_entry > MAX_EVENT_LOG_SIZE) {
1980                 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
1981                         next_entry, MAX_EVENT_LOG_SIZE);
1982                 next_entry = MAX_EVENT_LOG_SIZE;
1983         }
1984
1985         size = num_wraps ? capacity : next_entry;
1986
1987         /* bail out if nothing in log */
1988         if (size == 0) {
1989                 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
1990                 return pos;
1991         }
1992
1993 #ifdef CONFIG_IWLWIFI_DEBUG
1994         if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
1995                 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1996                         ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1997 #else
1998         size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1999                 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2000 #endif
2001         IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2002                 size);
2003
2004 #ifdef CONFIG_IWLWIFI_DEBUG
2005         if (display) {
2006                 if (full_log)
2007                         bufsz = capacity * 48;
2008                 else
2009                         bufsz = size * 48;
2010                 *buf = kmalloc(bufsz, GFP_KERNEL);
2011                 if (!*buf)
2012                         return -ENOMEM;
2013         }
2014         if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2015                 /*
2016                  * if uCode has wrapped back to top of log,
2017                  * start at the oldest entry,
2018                  * i.e the next one that uCode would fill.
2019                  */
2020                 if (num_wraps)
2021                         pos = iwl_print_event_log(priv, next_entry,
2022                                                 capacity - next_entry, mode,
2023                                                 pos, buf, bufsz);
2024                 /* (then/else) start at top of log */
2025                 pos = iwl_print_event_log(priv, 0,
2026                                           next_entry, mode, pos, buf, bufsz);
2027         } else
2028                 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2029                                                 next_entry, size, mode,
2030                                                 pos, buf, bufsz);
2031 #else
2032         pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2033                                         next_entry, size, mode,
2034                                         pos, buf, bufsz);
2035 #endif
2036         return pos;
2037 }
2038
2039 /**
2040  * iwl_alive_start - called after REPLY_ALIVE notification received
2041  *                   from protocol/runtime uCode (initialization uCode's
2042  *                   Alive gets handled by iwl_init_alive_start()).
2043  */
2044 static void iwl_alive_start(struct iwl_priv *priv)
2045 {
2046         int ret = 0;
2047
2048         IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2049
2050         if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2051                 /* We had an error bringing up the hardware, so take it
2052                  * all the way back down so we can try again */
2053                 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2054                 goto restart;
2055         }
2056
2057         /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2058          * This is a paranoid check, because we would not have gotten the
2059          * "runtime" alive if code weren't properly loaded.  */
2060         if (iwl_verify_ucode(priv)) {
2061                 /* Runtime instruction load was bad;
2062                  * take it all the way back down so we can try again */
2063                 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2064                 goto restart;
2065         }
2066
2067         ret = priv->cfg->ops->lib->alive_notify(priv);
2068         if (ret) {
2069                 IWL_WARN(priv,
2070                         "Could not complete ALIVE transition [ntf]: %d\n", ret);
2071                 goto restart;
2072         }
2073
2074         /* After the ALIVE response, we can send host commands to the uCode */
2075         set_bit(STATUS_ALIVE, &priv->status);
2076
2077         if (priv->cfg->ops->lib->recover_from_tx_stall) {
2078                 /* Enable timer to monitor the driver queues */
2079                 mod_timer(&priv->monitor_recover,
2080                         jiffies +
2081                         msecs_to_jiffies(priv->cfg->monitor_recover_period));
2082         }
2083
2084         if (iwl_is_rfkill(priv))
2085                 return;
2086
2087         ieee80211_wake_queues(priv->hw);
2088
2089         priv->active_rate = IWL_RATES_MASK;
2090
2091         /* Configure Tx antenna selection based on H/W config */
2092         if (priv->cfg->ops->hcmd->set_tx_ant)
2093                 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2094
2095         if (iwl_is_associated(priv)) {
2096                 struct iwl_rxon_cmd *active_rxon =
2097                                 (struct iwl_rxon_cmd *)&priv->active_rxon;
2098                 /* apply any changes in staging */
2099                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2100                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2101         } else {
2102                 /* Initialize our rx_config data */
2103                 iwl_connection_init_rx_config(priv, priv->iw_mode);
2104
2105                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2106                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2107
2108                 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2109         }
2110
2111         /* Configure Bluetooth device coexistence support */
2112         iwl_send_bt_config(priv);
2113
2114         iwl_reset_run_time_calib(priv);
2115
2116         /* Configure the adapter for unassociated operation */
2117         iwlcore_commit_rxon(priv);
2118
2119         /* At this point, the NIC is initialized and operational */
2120         iwl_rf_kill_ct_config(priv);
2121
2122         iwl_leds_init(priv);
2123
2124         IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2125         set_bit(STATUS_READY, &priv->status);
2126         wake_up_interruptible(&priv->wait_command_queue);
2127
2128         iwl_power_update_mode(priv, true);
2129         IWL_DEBUG_INFO(priv, "Updated power mode\n");
2130
2131
2132         return;
2133
2134  restart:
2135         queue_work(priv->workqueue, &priv->restart);
2136 }
2137
2138 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2139
2140 static void __iwl_down(struct iwl_priv *priv)
2141 {
2142         unsigned long flags;
2143         int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2144
2145         IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2146
2147         if (!exit_pending)
2148                 set_bit(STATUS_EXIT_PENDING, &priv->status);
2149
2150         iwl_clear_ucode_stations(priv, true);
2151
2152         /* Unblock any waiting calls */
2153         wake_up_interruptible_all(&priv->wait_command_queue);
2154
2155         /* Wipe out the EXIT_PENDING status bit if we are not actually
2156          * exiting the module */
2157         if (!exit_pending)
2158                 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2159
2160         /* stop and reset the on-board processor */
2161         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2162
2163         /* tell the device to stop sending interrupts */
2164         spin_lock_irqsave(&priv->lock, flags);
2165         iwl_disable_interrupts(priv);
2166         spin_unlock_irqrestore(&priv->lock, flags);
2167         iwl_synchronize_irq(priv);
2168
2169         if (priv->mac80211_registered)
2170                 ieee80211_stop_queues(priv->hw);
2171
2172         /* If we have not previously called iwl_init() then
2173          * clear all bits but the RF Kill bit and return */
2174         if (!iwl_is_init(priv)) {
2175                 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2176                                         STATUS_RF_KILL_HW |
2177                                test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2178                                         STATUS_GEO_CONFIGURED |
2179                                test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2180                                         STATUS_EXIT_PENDING;
2181                 goto exit;
2182         }
2183
2184         /* ...otherwise clear out all the status bits but the RF Kill
2185          * bit and continue taking the NIC down. */
2186         priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2187                                 STATUS_RF_KILL_HW |
2188                         test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2189                                 STATUS_GEO_CONFIGURED |
2190                         test_bit(STATUS_FW_ERROR, &priv->status) <<
2191                                 STATUS_FW_ERROR |
2192                        test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2193                                 STATUS_EXIT_PENDING;
2194
2195         /* device going down, Stop using ICT table */
2196         iwl_disable_ict(priv);
2197
2198         iwl_txq_ctx_stop(priv);
2199         iwl_rxq_stop(priv);
2200
2201         /* Power-down device's busmaster DMA clocks */
2202         iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2203         udelay(5);
2204
2205         /* Make sure (redundant) we've released our request to stay awake */
2206         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2207
2208         /* Stop the device, and put it in low power state */
2209         priv->cfg->ops->lib->apm_ops.stop(priv);
2210
2211  exit:
2212         memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2213
2214         if (priv->ibss_beacon)
2215                 dev_kfree_skb(priv->ibss_beacon);
2216         priv->ibss_beacon = NULL;
2217
2218         /* clear out any free frames */
2219         iwl_clear_free_frames(priv);
2220 }
2221
2222 static void iwl_down(struct iwl_priv *priv)
2223 {
2224         mutex_lock(&priv->mutex);
2225         __iwl_down(priv);
2226         mutex_unlock(&priv->mutex);
2227
2228         iwl_cancel_deferred_work(priv);
2229 }
2230
2231 #define HW_READY_TIMEOUT (50)
2232
2233 static int iwl_set_hw_ready(struct iwl_priv *priv)
2234 {
2235         int ret = 0;
2236
2237         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2238                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2239
2240         /* See if we got it */
2241         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2242                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2243                                 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2244                                 HW_READY_TIMEOUT);
2245         if (ret != -ETIMEDOUT)
2246                 priv->hw_ready = true;
2247         else
2248                 priv->hw_ready = false;
2249
2250         IWL_DEBUG_INFO(priv, "hardware %s\n",
2251                       (priv->hw_ready == 1) ? "ready" : "not ready");
2252         return ret;
2253 }
2254
2255 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2256 {
2257         int ret = 0;
2258
2259         IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
2260
2261         ret = iwl_set_hw_ready(priv);
2262         if (priv->hw_ready)
2263                 return ret;
2264
2265         /* If HW is not ready, prepare the conditions to check again */
2266         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2267                         CSR_HW_IF_CONFIG_REG_PREPARE);
2268
2269         ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2270                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2271                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2272
2273         /* HW should be ready by now, check again. */
2274         if (ret != -ETIMEDOUT)
2275                 iwl_set_hw_ready(priv);
2276
2277         return ret;
2278 }
2279
2280 #define MAX_HW_RESTARTS 5
2281
2282 static int __iwl_up(struct iwl_priv *priv)
2283 {
2284         int i;
2285         int ret;
2286
2287         if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2288                 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2289                 return -EIO;
2290         }
2291
2292         if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2293                 IWL_ERR(priv, "ucode not available for device bringup\n");
2294                 return -EIO;
2295         }
2296
2297         iwl_prepare_card_hw(priv);
2298
2299         if (!priv->hw_ready) {
2300                 IWL_WARN(priv, "Exit HW not ready\n");
2301                 return -EIO;
2302         }
2303
2304         /* If platform's RF_KILL switch is NOT set to KILL */
2305         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2306                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2307         else
2308                 set_bit(STATUS_RF_KILL_HW, &priv->status);
2309
2310         if (iwl_is_rfkill(priv)) {
2311                 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2312
2313                 iwl_enable_interrupts(priv);
2314                 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2315                 return 0;
2316         }
2317
2318         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2319
2320         ret = iwl_hw_nic_init(priv);
2321         if (ret) {
2322                 IWL_ERR(priv, "Unable to init nic\n");
2323                 return ret;
2324         }
2325
2326         /* make sure rfkill handshake bits are cleared */
2327         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2328         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2329                     CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2330
2331         /* clear (again), then enable host interrupts */
2332         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2333         iwl_enable_interrupts(priv);
2334
2335         /* really make sure rfkill handshake bits are cleared */
2336         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2337         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2338
2339         /* Copy original ucode data image from disk into backup cache.
2340          * This will be used to initialize the on-board processor's
2341          * data SRAM for a clean start when the runtime program first loads. */
2342         memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2343                priv->ucode_data.len);
2344
2345         for (i = 0; i < MAX_HW_RESTARTS; i++) {
2346
2347                 /* load bootstrap state machine,
2348                  * load bootstrap program into processor's memory,
2349                  * prepare to load the "initialize" uCode */
2350                 ret = priv->cfg->ops->lib->load_ucode(priv);
2351
2352                 if (ret) {
2353                         IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2354                                 ret);
2355                         continue;
2356                 }
2357
2358                 /* start card; "initialize" will load runtime ucode */
2359                 iwl_nic_start(priv);
2360
2361                 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2362
2363                 return 0;
2364         }
2365
2366         set_bit(STATUS_EXIT_PENDING, &priv->status);
2367         __iwl_down(priv);
2368         clear_bit(STATUS_EXIT_PENDING, &priv->status);
2369
2370         /* tried to restart and config the device for as long as our
2371          * patience could withstand */
2372         IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2373         return -EIO;
2374 }
2375
2376
2377 /*****************************************************************************
2378  *
2379  * Workqueue callbacks
2380  *
2381  *****************************************************************************/
2382
2383 static void iwl_bg_init_alive_start(struct work_struct *data)
2384 {
2385         struct iwl_priv *priv =
2386             container_of(data, struct iwl_priv, init_alive_start.work);
2387
2388         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2389                 return;
2390
2391         mutex_lock(&priv->mutex);
2392         priv->cfg->ops->lib->init_alive_start(priv);
2393         mutex_unlock(&priv->mutex);
2394 }
2395
2396 static void iwl_bg_alive_start(struct work_struct *data)
2397 {
2398         struct iwl_priv *priv =
2399             container_of(data, struct iwl_priv, alive_start.work);
2400
2401         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2402                 return;
2403
2404         /* enable dram interrupt */
2405         iwl_reset_ict(priv);
2406
2407         mutex_lock(&priv->mutex);
2408         iwl_alive_start(priv);
2409         mutex_unlock(&priv->mutex);
2410 }
2411
2412 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2413 {
2414         struct iwl_priv *priv = container_of(work, struct iwl_priv,
2415                         run_time_calib_work);
2416
2417         mutex_lock(&priv->mutex);
2418
2419         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2420             test_bit(STATUS_SCANNING, &priv->status)) {
2421                 mutex_unlock(&priv->mutex);
2422                 return;
2423         }
2424
2425         if (priv->start_calib) {
2426                 iwl_chain_noise_calibration(priv, &priv->statistics);
2427
2428                 iwl_sensitivity_calibration(priv, &priv->statistics);
2429         }
2430
2431         mutex_unlock(&priv->mutex);
2432         return;
2433 }
2434
2435 static void iwl_bg_restart(struct work_struct *data)
2436 {
2437         struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2438
2439         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2440                 return;
2441
2442         if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2443                 mutex_lock(&priv->mutex);
2444                 priv->vif = NULL;
2445                 priv->is_open = 0;
2446                 mutex_unlock(&priv->mutex);
2447                 iwl_down(priv);
2448                 ieee80211_restart_hw(priv->hw);
2449         } else {
2450                 iwl_down(priv);
2451
2452                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2453                         return;
2454
2455                 mutex_lock(&priv->mutex);
2456                 __iwl_up(priv);
2457                 mutex_unlock(&priv->mutex);
2458         }
2459 }
2460
2461 static void iwl_bg_rx_replenish(struct work_struct *data)
2462 {
2463         struct iwl_priv *priv =
2464             container_of(data, struct iwl_priv, rx_replenish);
2465
2466         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2467                 return;
2468
2469         mutex_lock(&priv->mutex);
2470         iwl_rx_replenish(priv);
2471         mutex_unlock(&priv->mutex);
2472 }
2473
2474 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2475
2476 void iwl_post_associate(struct iwl_priv *priv)
2477 {
2478         struct ieee80211_conf *conf = NULL;
2479         int ret = 0;
2480         unsigned long flags;
2481
2482         if (priv->iw_mode == NL80211_IFTYPE_AP) {
2483                 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
2484                 return;
2485         }
2486
2487         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2488                 return;
2489
2490
2491         if (!priv->vif || !priv->is_open)
2492                 return;
2493
2494         iwl_scan_cancel_timeout(priv, 200);
2495
2496         conf = ieee80211_get_hw_conf(priv->hw);
2497
2498         priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2499         iwlcore_commit_rxon(priv);
2500
2501         iwl_setup_rxon_timing(priv);
2502         ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2503                               sizeof(priv->rxon_timing), &priv->rxon_timing);
2504         if (ret)
2505                 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2506                             "Attempting to continue.\n");
2507
2508         priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2509
2510         iwl_set_rxon_ht(priv, &priv->current_ht_config);
2511
2512         if (priv->cfg->ops->hcmd->set_rxon_chain)
2513                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2514
2515         priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2516
2517         IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
2518                         priv->assoc_id, priv->beacon_int);
2519
2520         if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2521                 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2522         else
2523                 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2524
2525         if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2526                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2527                         priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2528                 else
2529                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2530
2531                 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2532                         priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2533
2534         }
2535
2536         iwlcore_commit_rxon(priv);
2537
2538         IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
2539                         priv->assoc_id, priv->active_rxon.bssid_addr);
2540
2541         switch (priv->iw_mode) {
2542         case NL80211_IFTYPE_STATION:
2543                 break;
2544
2545         case NL80211_IFTYPE_ADHOC:
2546
2547                 /* assume default assoc id */
2548                 priv->assoc_id = 1;
2549
2550                 iwl_add_local_station(priv, priv->bssid, true);
2551                 iwl_send_beacon_cmd(priv);
2552
2553                 break;
2554
2555         default:
2556                 IWL_ERR(priv, "%s Should not be called in %d mode\n",
2557                           __func__, priv->iw_mode);
2558                 break;
2559         }
2560
2561         spin_lock_irqsave(&priv->lock, flags);
2562         iwl_activate_qos(priv, 0);
2563         spin_unlock_irqrestore(&priv->lock, flags);
2564
2565         /* the chain noise calibration will enabled PM upon completion
2566          * If chain noise has already been run, then we need to enable
2567          * power management here */
2568         if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
2569                 iwl_power_update_mode(priv, false);
2570
2571         /* Enable Rx differential gain and sensitivity calibrations */
2572         iwl_chain_noise_reset(priv);
2573         priv->start_calib = 1;
2574
2575 }
2576
2577 /*****************************************************************************
2578  *
2579  * mac80211 entry point functions
2580  *
2581  *****************************************************************************/
2582
2583 #define UCODE_READY_TIMEOUT     (4 * HZ)
2584
2585 /*
2586  * Not a mac80211 entry point function, but it fits in with all the
2587  * other mac80211 functions grouped here.
2588  */
2589 static int iwl_mac_setup_register(struct iwl_priv *priv)
2590 {
2591         int ret;
2592         struct ieee80211_hw *hw = priv->hw;
2593         hw->rate_control_algorithm = "iwl-agn-rs";
2594
2595         /* Tell mac80211 our characteristics */
2596         hw->flags = IEEE80211_HW_SIGNAL_DBM |
2597                     IEEE80211_HW_NOISE_DBM |
2598                     IEEE80211_HW_AMPDU_AGGREGATION |
2599                     IEEE80211_HW_SPECTRUM_MGMT;
2600
2601         if (!priv->cfg->broken_powersave)
2602                 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2603                              IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2604
2605         if (priv->cfg->sku & IWL_SKU_N)
2606                 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2607                              IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2608
2609         hw->sta_data_size = sizeof(struct iwl_station_priv);
2610         hw->wiphy->interface_modes =
2611                 BIT(NL80211_IFTYPE_STATION) |
2612                 BIT(NL80211_IFTYPE_ADHOC);
2613
2614         hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
2615                             WIPHY_FLAG_DISABLE_BEACON_HINTS;
2616
2617         /*
2618          * For now, disable PS by default because it affects
2619          * RX performance significantly.
2620          */
2621         hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2622
2623         hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
2624         /* we create the 802.11 header and a zero-length SSID element */
2625         hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
2626
2627         /* Default value; 4 EDCA QOS priorities */
2628         hw->queues = 4;
2629
2630         hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2631
2632         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2633                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2634                         &priv->bands[IEEE80211_BAND_2GHZ];
2635         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2636                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2637                         &priv->bands[IEEE80211_BAND_5GHZ];
2638
2639         ret = ieee80211_register_hw(priv->hw);
2640         if (ret) {
2641                 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2642                 return ret;
2643         }
2644         priv->mac80211_registered = 1;
2645
2646         return 0;
2647 }
2648
2649
2650 static int iwl_mac_start(struct ieee80211_hw *hw)
2651 {
2652         struct iwl_priv *priv = hw->priv;
2653         int ret;
2654
2655         IWL_DEBUG_MAC80211(priv, "enter\n");
2656
2657         /* we should be verifying the device is ready to be opened */
2658         mutex_lock(&priv->mutex);
2659         ret = __iwl_up(priv);
2660         mutex_unlock(&priv->mutex);
2661
2662         if (ret)
2663                 return ret;
2664
2665         if (iwl_is_rfkill(priv))
2666                 goto out;
2667
2668         IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2669
2670         /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
2671          * mac80211 will not be run successfully. */
2672         ret = wait_event_interruptible_timeout(priv->wait_command_queue,
2673                         test_bit(STATUS_READY, &priv->status),
2674                         UCODE_READY_TIMEOUT);
2675         if (!ret) {
2676                 if (!test_bit(STATUS_READY, &priv->status)) {
2677                         IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
2678                                 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2679                         return -ETIMEDOUT;
2680                 }
2681         }
2682
2683         iwl_led_start(priv);
2684
2685 out:
2686         priv->is_open = 1;
2687         IWL_DEBUG_MAC80211(priv, "leave\n");
2688         return 0;
2689 }
2690
2691 static void iwl_mac_stop(struct ieee80211_hw *hw)
2692 {
2693         struct iwl_priv *priv = hw->priv;
2694
2695         IWL_DEBUG_MAC80211(priv, "enter\n");
2696
2697         if (!priv->is_open)
2698                 return;
2699
2700         priv->is_open = 0;
2701
2702         if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
2703                 /* stop mac, cancel any scan request and clear
2704                  * RXON_FILTER_ASSOC_MSK BIT
2705                  */
2706                 mutex_lock(&priv->mutex);
2707                 iwl_scan_cancel_timeout(priv, 100);
2708                 mutex_unlock(&priv->mutex);
2709         }
2710
2711         iwl_down(priv);
2712
2713         flush_workqueue(priv->workqueue);
2714
2715         /* enable interrupts again in order to receive rfkill changes */
2716         iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2717         iwl_enable_interrupts(priv);
2718
2719         IWL_DEBUG_MAC80211(priv, "leave\n");
2720 }
2721
2722 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2723 {
2724         struct iwl_priv *priv = hw->priv;
2725
2726         IWL_DEBUG_MACDUMP(priv, "enter\n");
2727
2728         IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2729                      ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2730
2731         if (iwl_tx_skb(priv, skb))
2732                 dev_kfree_skb_any(skb);
2733
2734         IWL_DEBUG_MACDUMP(priv, "leave\n");
2735         return NETDEV_TX_OK;
2736 }
2737
2738 void iwl_config_ap(struct iwl_priv *priv)
2739 {
2740         int ret = 0;
2741         unsigned long flags;
2742
2743         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2744                 return;
2745
2746         /* The following should be done only at AP bring up */
2747         if (!iwl_is_associated(priv)) {
2748
2749                 /* RXON - unassoc (to set timing command) */
2750                 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2751                 iwlcore_commit_rxon(priv);
2752
2753                 /* RXON Timing */
2754                 iwl_setup_rxon_timing(priv);
2755                 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2756                                 sizeof(priv->rxon_timing), &priv->rxon_timing);
2757                 if (ret)
2758                         IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2759                                         "Attempting to continue.\n");
2760
2761                 /* AP has all antennas */
2762                 priv->chain_noise_data.active_chains =
2763                         priv->hw_params.valid_rx_ant;
2764                 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2765                 if (priv->cfg->ops->hcmd->set_rxon_chain)
2766                         priv->cfg->ops->hcmd->set_rxon_chain(priv);
2767
2768                 /* FIXME: what should be the assoc_id for AP? */
2769                 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2770                 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2771                         priv->staging_rxon.flags |=
2772                                 RXON_FLG_SHORT_PREAMBLE_MSK;
2773                 else
2774                         priv->staging_rxon.flags &=
2775                                 ~RXON_FLG_SHORT_PREAMBLE_MSK;
2776
2777                 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2778                         if (priv->assoc_capability &
2779                                 WLAN_CAPABILITY_SHORT_SLOT_TIME)
2780                                 priv->staging_rxon.flags |=
2781                                         RXON_FLG_SHORT_SLOT_MSK;
2782                         else
2783                                 priv->staging_rxon.flags &=
2784                                         ~RXON_FLG_SHORT_SLOT_MSK;
2785
2786                         if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2787                                 priv->staging_rxon.flags &=
2788                                         ~RXON_FLG_SHORT_SLOT_MSK;
2789                 }
2790                 /* restore RXON assoc */
2791                 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2792                 iwlcore_commit_rxon(priv);
2793                 iwl_reset_qos(priv);
2794                 spin_lock_irqsave(&priv->lock, flags);
2795                 iwl_activate_qos(priv, 1);
2796                 spin_unlock_irqrestore(&priv->lock, flags);
2797                 iwl_add_bcast_station(priv);
2798         }
2799         iwl_send_beacon_cmd(priv);
2800
2801         /* FIXME - we need to add code here to detect a totally new
2802          * configuration, reset the AP, unassoc, rxon timing, assoc,
2803          * clear sta table, add BCAST sta... */
2804 }
2805
2806 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
2807                                     struct ieee80211_vif *vif,
2808                                     struct ieee80211_key_conf *keyconf,
2809                                     struct ieee80211_sta *sta,
2810                                     u32 iv32, u16 *phase1key)
2811 {
2812
2813         struct iwl_priv *priv = hw->priv;
2814         IWL_DEBUG_MAC80211(priv, "enter\n");
2815
2816         iwl_update_tkip_key(priv, keyconf,
2817                             sta ? sta->addr : iwl_bcast_addr,
2818                             iv32, phase1key);
2819
2820         IWL_DEBUG_MAC80211(priv, "leave\n");
2821 }
2822
2823 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2824                            struct ieee80211_vif *vif,
2825                            struct ieee80211_sta *sta,
2826                            struct ieee80211_key_conf *key)
2827 {
2828         struct iwl_priv *priv = hw->priv;
2829         const u8 *addr;
2830         int ret;
2831         u8 sta_id;
2832         bool is_default_wep_key = false;
2833
2834         IWL_DEBUG_MAC80211(priv, "enter\n");
2835
2836         if (priv->cfg->mod_params->sw_crypto) {
2837                 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2838                 return -EOPNOTSUPP;
2839         }
2840         addr = sta ? sta->addr : iwl_bcast_addr;
2841         sta_id = iwl_find_station(priv, addr);
2842         if (sta_id == IWL_INVALID_STATION) {
2843                 IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
2844                                    addr);
2845                 return -EINVAL;
2846
2847         }
2848
2849         mutex_lock(&priv->mutex);
2850         iwl_scan_cancel_timeout(priv, 100);
2851
2852         /* If we are getting WEP group key and we didn't receive any key mapping
2853          * so far, we are in legacy wep mode (group key only), otherwise we are
2854          * in 1X mode.
2855          * In legacy wep mode, we use another host command to the uCode */
2856         if (key->alg == ALG_WEP && sta_id == priv->hw_params.bcast_sta_id &&
2857                 priv->iw_mode != NL80211_IFTYPE_AP) {
2858                 if (cmd == SET_KEY)
2859                         is_default_wep_key = !priv->key_mapping_key;
2860                 else
2861                         is_default_wep_key =
2862                                         (key->hw_key_idx == HW_KEY_DEFAULT);
2863         }
2864
2865         switch (cmd) {
2866         case SET_KEY:
2867                 if (is_default_wep_key)
2868                         ret = iwl_set_default_wep_key(priv, key);
2869                 else
2870                         ret = iwl_set_dynamic_key(priv, key, sta_id);
2871
2872                 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2873                 break;
2874         case DISABLE_KEY:
2875                 if (is_default_wep_key)
2876                         ret = iwl_remove_default_wep_key(priv, key);
2877                 else
2878                         ret = iwl_remove_dynamic_key(priv, key, sta_id);
2879
2880                 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2881                 break;
2882         default:
2883                 ret = -EINVAL;
2884         }
2885
2886         mutex_unlock(&priv->mutex);
2887         IWL_DEBUG_MAC80211(priv, "leave\n");
2888
2889         return ret;
2890 }
2891
2892 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
2893                                 struct ieee80211_vif *vif,
2894                              enum ieee80211_ampdu_mlme_action action,
2895                              struct ieee80211_sta *sta, u16 tid, u16 *ssn)
2896 {
2897         struct iwl_priv *priv = hw->priv;
2898         int ret;
2899
2900         IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2901                      sta->addr, tid);
2902
2903         if (!(priv->cfg->sku & IWL_SKU_N))
2904                 return -EACCES;
2905
2906         switch (action) {
2907         case IEEE80211_AMPDU_RX_START:
2908                 IWL_DEBUG_HT(priv, "start Rx\n");
2909                 return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
2910         case IEEE80211_AMPDU_RX_STOP:
2911                 IWL_DEBUG_HT(priv, "stop Rx\n");
2912                 ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
2913                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2914                         return 0;
2915                 else
2916                         return ret;
2917         case IEEE80211_AMPDU_TX_START:
2918                 IWL_DEBUG_HT(priv, "start Tx\n");
2919                 ret = iwl_tx_agg_start(priv, sta->addr, tid, ssn);
2920                 if (ret == 0) {
2921                         priv->_agn.agg_tids_count++;
2922                         IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2923                                      priv->_agn.agg_tids_count);
2924                 }
2925                 return ret;
2926         case IEEE80211_AMPDU_TX_STOP:
2927                 IWL_DEBUG_HT(priv, "stop Tx\n");
2928                 ret = iwl_tx_agg_stop(priv, sta->addr, tid);
2929                 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
2930                         priv->_agn.agg_tids_count--;
2931                         IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2932                                      priv->_agn.agg_tids_count);
2933                 }
2934                 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2935                         return 0;
2936                 else
2937                         return ret;
2938         case IEEE80211_AMPDU_TX_OPERATIONAL:
2939                 /* do nothing */
2940                 return -EOPNOTSUPP;
2941         default:
2942                 IWL_DEBUG_HT(priv, "unknown\n");
2943                 return -EINVAL;
2944                 break;
2945         }
2946         return 0;
2947 }
2948
2949 static int iwl_mac_get_stats(struct ieee80211_hw *hw,
2950                              struct ieee80211_low_level_stats *stats)
2951 {
2952         struct iwl_priv *priv = hw->priv;
2953
2954         priv = hw->priv;
2955         IWL_DEBUG_MAC80211(priv, "enter\n");
2956         IWL_DEBUG_MAC80211(priv, "leave\n");
2957
2958         return 0;
2959 }
2960
2961 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
2962                                struct ieee80211_vif *vif,
2963                                enum sta_notify_cmd cmd,
2964                                struct ieee80211_sta *sta)
2965 {
2966         struct iwl_priv *priv = hw->priv;
2967         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2968         int sta_id;
2969
2970         switch (cmd) {
2971         case STA_NOTIFY_SLEEP:
2972                 WARN_ON(!sta_priv->client);
2973                 sta_priv->asleep = true;
2974                 if (atomic_read(&sta_priv->pending_frames) > 0)
2975                         ieee80211_sta_block_awake(hw, sta, true);
2976                 break;
2977         case STA_NOTIFY_AWAKE:
2978                 WARN_ON(!sta_priv->client);
2979                 if (!sta_priv->asleep)
2980                         break;
2981                 sta_priv->asleep = false;
2982                 sta_id = iwl_find_station(priv, sta->addr);
2983                 if (sta_id != IWL_INVALID_STATION)
2984                         iwl_sta_modify_ps_wake(priv, sta_id);
2985                 break;
2986         default:
2987                 break;
2988         }
2989 }
2990
2991 /**
2992  * iwl_restore_wepkeys - Restore WEP keys to device
2993  */
2994 static void iwl_restore_wepkeys(struct iwl_priv *priv)
2995 {
2996         mutex_lock(&priv->mutex);
2997         if (priv->iw_mode == NL80211_IFTYPE_STATION &&
2998             priv->default_wep_key &&
2999             iwl_send_static_wepkey_cmd(priv, 0))
3000                 IWL_ERR(priv, "Could not send WEP static key\n");
3001         mutex_unlock(&priv->mutex);
3002 }
3003
3004 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
3005                               struct ieee80211_vif *vif,
3006                               struct ieee80211_sta *sta)
3007 {
3008         struct iwl_priv *priv = hw->priv;
3009         struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3010         bool is_ap = priv->iw_mode == NL80211_IFTYPE_STATION;
3011         int ret;
3012         u8 sta_id;
3013
3014         IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
3015                         sta->addr);
3016
3017         atomic_set(&sta_priv->pending_frames, 0);
3018         if (vif->type == NL80211_IFTYPE_AP)
3019                 sta_priv->client = true;
3020
3021         ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
3022                                      &sta_id);
3023         if (ret) {
3024                 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
3025                         sta->addr, ret);
3026                 /* Should we return success if return code is EEXIST ? */
3027                 return ret;
3028         }
3029
3030         iwl_restore_wepkeys(priv);
3031
3032         /* Initialize rate scaling */
3033         IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
3034                        sta->addr);
3035         iwl_rs_rate_init(priv, sta, sta_id);
3036
3037         return ret;
3038 }
3039
3040 /*****************************************************************************
3041  *
3042  * sysfs attributes
3043  *
3044  *****************************************************************************/
3045
3046 #ifdef CONFIG_IWLWIFI_DEBUG
3047
3048 /*
3049  * The following adds a new attribute to the sysfs representation
3050  * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
3051  * used for controlling the debug level.
3052  *
3053  * See the level definitions in iwl for details.
3054  *
3055  * The debug_level being managed using sysfs below is a per device debug
3056  * level that is used instead of the global debug level if it (the per
3057  * device debug level) is set.
3058  */
3059 static ssize_t show_debug_level(struct device *d,
3060                                 struct device_attribute *attr, char *buf)
3061 {
3062         struct iwl_priv *priv = dev_get_drvdata(d);
3063         return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
3064 }
3065 static ssize_t store_debug_level(struct device *d,
3066                                 struct device_attribute *attr,
3067                                  const char *buf, size_t count)
3068 {
3069         struct iwl_priv *priv = dev_get_drvdata(d);
3070         unsigned long val;
3071         int ret;
3072
3073         ret = strict_strtoul(buf, 0, &val);
3074         if (ret)
3075                 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
3076         else {
3077                 priv->debug_level = val;
3078                 if (iwl_alloc_traffic_mem(priv))
3079                         IWL_ERR(priv,
3080                                 "Not enough memory to generate traffic log\n");
3081         }
3082         return strnlen(buf, count);
3083 }
3084
3085 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
3086                         show_debug_level, store_debug_level);
3087
3088
3089 #endif /* CONFIG_IWLWIFI_DEBUG */
3090
3091
3092 static ssize_t show_temperature(struct device *d,
3093                                 struct device_attribute *attr, char *buf)
3094 {
3095         struct iwl_priv *priv = dev_get_drvdata(d);
3096
3097         if (!iwl_is_alive(priv))
3098                 return -EAGAIN;
3099
3100         return sprintf(buf, "%d\n", priv->temperature);
3101 }
3102
3103 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
3104
3105 static ssize_t show_tx_power(struct device *d,
3106                              struct device_attribute *attr, char *buf)
3107 {
3108         struct iwl_priv *priv = dev_get_drvdata(d);
3109
3110         if (!iwl_is_ready_rf(priv))
3111                 return sprintf(buf, "off\n");
3112         else
3113                 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
3114 }
3115
3116 static ssize_t store_tx_power(struct device *d,
3117                               struct device_attribute *attr,
3118                               const char *buf, size_t count)
3119 {
3120         struct iwl_priv *priv = dev_get_drvdata(d);
3121         unsigned long val;
3122         int ret;
3123
3124         ret = strict_strtoul(buf, 10, &val);
3125         if (ret)
3126                 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
3127         else {
3128                 ret = iwl_set_tx_power(priv, val, false);
3129                 if (ret)
3130                         IWL_ERR(priv, "failed setting tx power (0x%d).\n",
3131                                 ret);
3132                 else
3133                         ret = count;
3134         }
3135         return ret;
3136 }
3137
3138 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
3139
3140 static ssize_t show_statistics(struct device *d,
3141                                struct device_attribute *attr, char *buf)
3142 {
3143         struct iwl_priv *priv = dev_get_drvdata(d);
3144         u32 size = sizeof(struct iwl_notif_statistics);
3145         u32 len = 0, ofs = 0;
3146         u8 *data = (u8 *)&priv->statistics;
3147         int rc = 0;
3148
3149         if (!iwl_is_alive(priv))
3150                 return -EAGAIN;
3151
3152         mutex_lock(&priv->mutex);
3153         rc = iwl_send_statistics_request(priv, CMD_SYNC, false);
3154         mutex_unlock(&priv->mutex);
3155
3156         if (rc) {
3157                 len = sprintf(buf,
3158                               "Error sending statistics request: 0x%08X\n", rc);
3159                 return len;
3160         }
3161
3162         while (size && (PAGE_SIZE - len)) {
3163                 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3164                                    PAGE_SIZE - len, 1);
3165                 len = strlen(buf);
3166                 if (PAGE_SIZE - len)
3167                         buf[len++] = '\n';
3168
3169                 ofs += 16;
3170                 size -= min(size, 16U);
3171         }
3172
3173         return len;
3174 }
3175
3176 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
3177
3178 static ssize_t show_rts_ht_protection(struct device *d,
3179                              struct device_attribute *attr, char *buf)
3180 {
3181         struct iwl_priv *priv = dev_get_drvdata(d);
3182
3183         return sprintf(buf, "%s\n",
3184                 priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
3185 }
3186
3187 static ssize_t store_rts_ht_protection(struct device *d,
3188                               struct device_attribute *attr,
3189                               const char *buf, size_t count)
3190 {
3191         struct iwl_priv *priv = dev_get_drvdata(d);
3192         unsigned long val;
3193         int ret;
3194
3195         ret = strict_strtoul(buf, 10, &val);
3196         if (ret)
3197                 IWL_INFO(priv, "Input is not in decimal form.\n");
3198         else {
3199                 if (!iwl_is_associated(priv))
3200                         priv->cfg->use_rts_for_ht = val ? true : false;
3201                 else
3202                         IWL_ERR(priv, "Sta associated with AP - "
3203                                 "Change protection mechanism is not allowed\n");
3204                 ret = count;
3205         }
3206         return ret;
3207 }
3208
3209 static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
3210                         show_rts_ht_protection, store_rts_ht_protection);
3211
3212
3213 /*****************************************************************************
3214  *
3215  * driver setup and teardown
3216  *
3217  *****************************************************************************/
3218
3219 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3220 {
3221         priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3222
3223         init_waitqueue_head(&priv->wait_command_queue);
3224
3225         INIT_WORK(&priv->restart, iwl_bg_restart);
3226         INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3227         INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3228         INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3229         INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3230         INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3231
3232         iwl_setup_scan_deferred_work(priv);
3233
3234         if (priv->cfg->ops->lib->setup_deferred_work)
3235                 priv->cfg->ops->lib->setup_deferred_work(priv);
3236
3237         init_timer(&priv->statistics_periodic);
3238         priv->statistics_periodic.data = (unsigned long)priv;
3239         priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3240
3241         init_timer(&priv->ucode_trace);
3242         priv->ucode_trace.data = (unsigned long)priv;
3243         priv->ucode_trace.function = iwl_bg_ucode_trace;
3244
3245         if (priv->cfg->ops->lib->recover_from_tx_stall) {
3246                 init_timer(&priv->monitor_recover);
3247                 priv->monitor_recover.data = (unsigned long)priv;
3248                 priv->monitor_recover.function =
3249                         priv->cfg->ops->lib->recover_from_tx_stall;
3250         }
3251
3252         if (!priv->cfg->use_isr_legacy)
3253                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3254                         iwl_irq_tasklet, (unsigned long)priv);
3255         else
3256                 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3257                         iwl_irq_tasklet_legacy, (unsigned long)priv);
3258 }
3259
3260 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3261 {
3262         if (priv->cfg->ops->lib->cancel_deferred_work)
3263                 priv->cfg->ops->lib->cancel_deferred_work(priv);
3264
3265         cancel_delayed_work_sync(&priv->init_alive_start);
3266         cancel_delayed_work(&priv->scan_check);
3267         cancel_delayed_work(&priv->alive_start);
3268         cancel_work_sync(&priv->beacon_update);
3269         del_timer_sync(&priv->statistics_periodic);
3270         del_timer_sync(&priv->ucode_trace);
3271         if (priv->cfg->ops->lib->recover_from_tx_stall)
3272                 del_timer_sync(&priv->monitor_recover);
3273 }
3274
3275 static void iwl_init_hw_rates(struct iwl_priv *priv,
3276                               struct ieee80211_rate *rates)
3277 {
3278         int i;
3279
3280         for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3281                 rates[i].bitrate = iwl_rates[i].ieee * 5;
3282                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3283                 rates[i].hw_value_short = i;
3284                 rates[i].flags = 0;
3285                 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3286                         /*
3287                          * If CCK != 1M then set short preamble rate flag.
3288                          */
3289                         rates[i].flags |=
3290                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3291                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
3292                 }
3293         }
3294 }
3295
3296 static int iwl_init_drv(struct iwl_priv *priv)
3297 {
3298         int ret;
3299
3300         priv->ibss_beacon = NULL;
3301
3302         spin_lock_init(&priv->sta_lock);
3303         spin_lock_init(&priv->hcmd_lock);
3304
3305         INIT_LIST_HEAD(&priv->free_frames);
3306
3307         mutex_init(&priv->mutex);
3308         mutex_init(&priv->sync_cmd_mutex);
3309
3310         priv->ieee_channels = NULL;
3311         priv->ieee_rates = NULL;
3312         priv->band = IEEE80211_BAND_2GHZ;
3313
3314         priv->iw_mode = NL80211_IFTYPE_STATION;
3315         priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3316         priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3317         priv->_agn.agg_tids_count = 0;
3318
3319         /* initialize force reset */
3320         priv->force_reset[IWL_RF_RESET].reset_duration =
3321                 IWL_DELAY_NEXT_FORCE_RF_RESET;
3322         priv->force_reset[IWL_FW_RESET].reset_duration =
3323                 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3324
3325         /* Choose which receivers/antennas to use */
3326         if (priv->cfg->ops->hcmd->set_rxon_chain)
3327                 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3328
3329         iwl_init_scan_params(priv);
3330
3331         iwl_reset_qos(priv);
3332
3333         priv->qos_data.qos_active = 0;
3334         priv->qos_data.qos_cap.val = 0;
3335
3336         /* Set the tx_power_user_lmt to the lowest power level
3337          * this value will get overwritten by channel max power avg
3338          * from eeprom */
3339         priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
3340
3341         ret = iwl_init_channel_map(priv);
3342         if (ret) {
3343                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3344                 goto err;
3345         }
3346
3347         ret = iwlcore_init_geos(priv);
3348         if (ret) {
3349                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3350                 goto err_free_channel_map;
3351         }
3352         iwl_init_hw_rates(priv, priv->ieee_rates);
3353
3354         return 0;
3355
3356 err_free_channel_map:
3357         iwl_free_channel_map(priv);
3358 err:
3359         return ret;
3360 }
3361
3362 static void iwl_uninit_drv(struct iwl_priv *priv)
3363 {
3364         iwl_calib_free_results(priv);
3365         iwlcore_free_geos(priv);
3366         iwl_free_channel_map(priv);
3367         kfree(priv->scan);
3368 }
3369
3370 static struct attribute *iwl_sysfs_entries[] = {
3371         &dev_attr_statistics.attr,
3372         &dev_attr_temperature.attr,
3373         &dev_attr_tx_power.attr,
3374         &dev_attr_rts_ht_protection.attr,
3375 #ifdef CONFIG_IWLWIFI_DEBUG
3376         &dev_attr_debug_level.attr,
3377 #endif
3378         NULL
3379 };
3380
3381 static struct attribute_group iwl_attribute_group = {
3382         .name = NULL,           /* put in device directory */
3383         .attrs = iwl_sysfs_entries,
3384 };
3385
3386 static struct ieee80211_ops iwl_hw_ops = {
3387         .tx = iwl_mac_tx,
3388         .start = iwl_mac_start,
3389         .stop = iwl_mac_stop,
3390         .add_interface = iwl_mac_add_interface,
3391         .remove_interface = iwl_mac_remove_interface,
3392         .config = iwl_mac_config,
3393         .configure_filter = iwl_configure_filter,
3394         .set_key = iwl_mac_set_key,
3395         .update_tkip_key = iwl_mac_update_tkip_key,
3396         .get_stats = iwl_mac_get_stats,
3397         .conf_tx = iwl_mac_conf_tx,
3398         .reset_tsf = iwl_mac_reset_tsf,
3399         .bss_info_changed = iwl_bss_info_changed,
3400         .ampdu_action = iwl_mac_ampdu_action,
3401         .hw_scan = iwl_mac_hw_scan,
3402         .sta_notify = iwl_mac_sta_notify,
3403         .sta_add = iwlagn_mac_sta_add,
3404         .sta_remove = iwl_mac_sta_remove,
3405 };
3406
3407 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3408 {
3409         int err = 0;
3410         struct iwl_priv *priv;
3411         struct ieee80211_hw *hw;
3412         struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3413         unsigned long flags;
3414         u16 pci_cmd;
3415
3416         /************************
3417          * 1. Allocating HW data
3418          ************************/
3419
3420         /* Disabling hardware scan means that mac80211 will perform scans
3421          * "the hard way", rather than using device's scan. */
3422         if (cfg->mod_params->disable_hw_scan) {
3423                 if (iwl_debug_level & IWL_DL_INFO)
3424                         dev_printk(KERN_DEBUG, &(pdev->dev),
3425                                    "Disabling hw_scan\n");
3426                 iwl_hw_ops.hw_scan = NULL;
3427         }
3428
3429         hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3430         if (!hw) {
3431                 err = -ENOMEM;
3432                 goto out;
3433         }
3434         priv = hw->priv;
3435         /* At this point both hw and priv are allocated. */
3436
3437         SET_IEEE80211_DEV(hw, &pdev->dev);
3438
3439         IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3440         priv->cfg = cfg;
3441         priv->pci_dev = pdev;
3442         priv->inta_mask = CSR_INI_SET_MASK;
3443
3444 #ifdef CONFIG_IWLWIFI_DEBUG
3445         atomic_set(&priv->restrict_refcnt, 0);
3446 #endif
3447         if (iwl_alloc_traffic_mem(priv))
3448                 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3449
3450         /**************************
3451          * 2. Initializing PCI bus
3452          **************************/
3453         if (pci_enable_device(pdev)) {
3454                 err = -ENODEV;
3455                 goto out_ieee80211_free_hw;
3456         }
3457
3458         pci_set_master(pdev);
3459
3460         err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3461         if (!err)
3462                 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3463         if (err) {
3464                 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3465                 if (!err)
3466                         err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3467                 /* both attempts failed: */
3468                 if (err) {
3469                         IWL_WARN(priv, "No suitable DMA available.\n");
3470                         goto out_pci_disable_device;
3471                 }
3472         }
3473
3474         err = pci_request_regions(pdev, DRV_NAME);
3475         if (err)
3476                 goto out_pci_disable_device;
3477
3478         pci_set_drvdata(pdev, priv);
3479
3480
3481         /***********************
3482          * 3. Read REV register
3483          ***********************/
3484         priv->hw_base = pci_iomap(pdev, 0, 0);
3485         if (!priv->hw_base) {
3486                 err = -ENODEV;
3487                 goto out_pci_release_regions;
3488         }
3489
3490         IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
3491                 (unsigned long long) pci_resource_len(pdev, 0));
3492         IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
3493
3494         /* these spin locks will be used in apm_ops.init and EEPROM access
3495          * we should init now
3496          */
3497         spin_lock_init(&priv->reg_lock);
3498         spin_lock_init(&priv->lock);
3499
3500         /*
3501          * stop and reset the on-board processor just in case it is in a
3502          * strange state ... like being left stranded by a primary kernel
3503          * and this is now the kdump kernel trying to start up
3504          */
3505         iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3506
3507         iwl_hw_detect(priv);
3508         IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3509                 priv->cfg->name, priv->hw_rev);
3510
3511         /* We disable the RETRY_TIMEOUT register (0x41) to keep
3512          * PCI Tx retries from interfering with C3 CPU state */
3513         pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
3514
3515         iwl_prepare_card_hw(priv);
3516         if (!priv->hw_ready) {
3517                 IWL_WARN(priv, "Failed, HW not ready\n");
3518                 goto out_iounmap;
3519         }
3520
3521         /*****************
3522          * 4. Read EEPROM
3523          *****************/
3524         /* Read the EEPROM */
3525         err = iwl_eeprom_init(priv);
3526         if (err) {
3527                 IWL_ERR(priv, "Unable to init EEPROM\n");
3528                 goto out_iounmap;
3529         }
3530         err = iwl_eeprom_check_version(priv);
3531         if (err)
3532                 goto out_free_eeprom;
3533
3534         /* extract MAC Address */
3535         iwl_eeprom_get_mac(priv, priv->mac_addr);
3536         IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
3537         SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
3538
3539         /************************
3540          * 5. Setup HW constants
3541          ************************/
3542         if (iwl_set_hw_params(priv)) {
3543                 IWL_ERR(priv, "failed to set hw parameters\n");
3544                 goto out_free_eeprom;
3545         }
3546
3547         /*******************
3548          * 6. Setup priv
3549          *******************/
3550
3551         err = iwl_init_drv(priv);
3552         if (err)
3553                 goto out_free_eeprom;
3554         /* At this point both hw and priv are initialized. */
3555
3556         /********************
3557          * 7. Setup services
3558          ********************/
3559         spin_lock_irqsave(&priv->lock, flags);
3560         iwl_disable_interrupts(priv);
3561         spin_unlock_irqrestore(&priv->lock, flags);
3562
3563         pci_enable_msi(priv->pci_dev);
3564
3565         iwl_alloc_isr_ict(priv);
3566         err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
3567                           IRQF_SHARED, DRV_NAME, priv);
3568         if (err) {
3569                 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
3570                 goto out_disable_msi;
3571         }
3572         err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
3573         if (err) {
3574                 IWL_ERR(priv, "failed to create sysfs device attributes\n");
3575                 goto out_free_irq;
3576         }
3577
3578         iwl_setup_deferred_work(priv);
3579         iwl_setup_rx_handlers(priv);
3580
3581         /*********************************************
3582          * 8. Enable interrupts and read RFKILL state
3583          *********************************************/
3584
3585         /* enable interrupts if needed: hw bug w/a */
3586         pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
3587         if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
3588                 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
3589                 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
3590         }
3591
3592         iwl_enable_interrupts(priv);
3593
3594         /* If platform's RF_KILL switch is NOT set to KILL */
3595         if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3596                 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3597         else
3598                 set_bit(STATUS_RF_KILL_HW, &priv->status);
3599
3600         wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3601                 test_bit(STATUS_RF_KILL_HW, &priv->status));
3602
3603         iwl_power_initialize(priv);
3604         iwl_tt_initialize(priv);
3605
3606         err = iwl_request_firmware(priv, true);
3607         if (err)
3608                 goto out_remove_sysfs;
3609
3610         return 0;
3611
3612  out_remove_sysfs:
3613         destroy_workqueue(priv->workqueue);
3614         priv->workqueue = NULL;
3615         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3616  out_free_irq:
3617         free_irq(priv->pci_dev->irq, priv);
3618         iwl_free_isr_ict(priv);
3619  out_disable_msi:
3620         pci_disable_msi(priv->pci_dev);
3621         iwl_uninit_drv(priv);
3622  out_free_eeprom:
3623         iwl_eeprom_free(priv);
3624  out_iounmap:
3625         pci_iounmap(pdev, priv->hw_base);
3626  out_pci_release_regions:
3627         pci_set_drvdata(pdev, NULL);
3628         pci_release_regions(pdev);
3629  out_pci_disable_device:
3630         pci_disable_device(pdev);
3631  out_ieee80211_free_hw:
3632         iwl_free_traffic_mem(priv);
3633         ieee80211_free_hw(priv->hw);
3634  out:
3635         return err;
3636 }
3637
3638 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
3639 {
3640         struct iwl_priv *priv = pci_get_drvdata(pdev);
3641         unsigned long flags;
3642
3643         if (!priv)
3644                 return;
3645
3646         IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3647
3648         iwl_dbgfs_unregister(priv);
3649         sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3650
3651         /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3652          * to be called and iwl_down since we are removing the device
3653          * we need to set STATUS_EXIT_PENDING bit.
3654          */
3655         set_bit(STATUS_EXIT_PENDING, &priv->status);
3656         if (priv->mac80211_registered) {
3657                 ieee80211_unregister_hw(priv->hw);
3658                 priv->mac80211_registered = 0;
3659         } else {
3660                 iwl_down(priv);
3661         }
3662
3663         /*
3664          * Make sure device is reset to low power before unloading driver.
3665          * This may be redundant with iwl_down(), but there are paths to
3666          * run iwl_down() without calling apm_ops.stop(), and there are
3667          * paths to avoid running iwl_down() at all before leaving driver.
3668          * This (inexpensive) call *makes sure* device is reset.
3669          */
3670         priv->cfg->ops->lib->apm_ops.stop(priv);
3671
3672         iwl_tt_exit(priv);
3673
3674         /* make sure we flush any pending irq or
3675          * tasklet for the driver
3676          */
3677         spin_lock_irqsave(&priv->lock, flags);
3678         iwl_disable_interrupts(priv);
3679         spin_unlock_irqrestore(&priv->lock, flags);
3680
3681         iwl_synchronize_irq(priv);
3682
3683         iwl_dealloc_ucode_pci(priv);
3684
3685         if (priv->rxq.bd)
3686                 iwl_rx_queue_free(priv, &priv->rxq);
3687         iwl_hw_txq_ctx_free(priv);
3688
3689         iwl_eeprom_free(priv);
3690
3691
3692         /*netif_stop_queue(dev); */
3693         flush_workqueue(priv->workqueue);
3694
3695         /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3696          * priv->workqueue... so we can't take down the workqueue
3697          * until now... */
3698         destroy_workqueue(priv->workqueue);
3699         priv->workqueue = NULL;
3700         iwl_free_traffic_mem(priv);
3701
3702         free_irq(priv->pci_dev->irq, priv);
3703         pci_disable_msi(priv->pci_dev);
3704         pci_iounmap(pdev, priv->hw_base);
3705         pci_release_regions(pdev);
3706         pci_disable_device(pdev);
3707         pci_set_drvdata(pdev, NULL);
3708
3709         iwl_uninit_drv(priv);
3710
3711         iwl_free_isr_ict(priv);
3712
3713         if (priv->ibss_beacon)
3714                 dev_kfree_skb(priv->ibss_beacon);
3715
3716         ieee80211_free_hw(priv->hw);
3717 }
3718
3719
3720 /*****************************************************************************
3721  *
3722  * driver and module entry point
3723  *
3724  *****************************************************************************/
3725
3726 /* Hardware specific file defines the PCI IDs table for that hardware module */
3727 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
3728 #ifdef CONFIG_IWL4965
3729         {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
3730         {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
3731 #endif /* CONFIG_IWL4965 */
3732 #ifdef CONFIG_IWL5000
3733 /* 5100 Series WiFi */
3734         {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
3735         {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
3736         {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
3737         {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
3738         {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
3739         {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
3740         {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
3741         {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
3742         {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
3743         {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
3744         {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
3745         {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
3746         {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
3747         {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
3748         {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
3749         {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
3750         {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
3751         {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
3752         {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
3753         {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
3754         {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
3755         {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
3756         {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
3757         {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
3758
3759 /* 5300 Series WiFi */
3760         {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
3761         {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
3762         {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
3763         {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
3764         {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
3765         {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
3766         {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
3767         {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
3768         {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
3769         {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
3770         {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
3771         {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
3772
3773 /* 5350 Series WiFi/WiMax */
3774         {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
3775         {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
3776         {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
3777
3778 /* 5150 Series Wifi/WiMax */
3779         {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
3780         {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
3781         {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
3782         {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
3783         {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
3784         {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
3785
3786         {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
3787         {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
3788         {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
3789         {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
3790
3791 /* 6x00 Series */
3792         {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
3793         {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
3794         {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
3795         {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
3796         {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
3797         {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
3798         {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
3799         {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
3800         {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
3801         {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
3802
3803 /* 6x50 WiFi/WiMax Series */
3804         {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
3805         {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
3806         {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
3807         {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
3808         {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
3809         {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
3810
3811 /* 1000 Series WiFi */
3812         {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
3813         {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
3814         {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
3815         {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
3816         {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
3817         {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
3818         {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
3819         {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
3820         {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
3821         {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
3822         {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
3823         {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
3824 #endif /* CONFIG_IWL5000 */
3825
3826         {0}
3827 };
3828 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
3829
3830 static struct pci_driver iwl_driver = {
3831         .name = DRV_NAME,
3832         .id_table = iwl_hw_card_ids,
3833         .probe = iwl_pci_probe,
3834         .remove = __devexit_p(iwl_pci_remove),
3835 #ifdef CONFIG_PM
3836         .suspend = iwl_pci_suspend,
3837         .resume = iwl_pci_resume,
3838 #endif
3839 };
3840
3841 static int __init iwl_init(void)
3842 {
3843
3844         int ret;
3845         printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
3846         printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
3847
3848         ret = iwlagn_rate_control_register();
3849         if (ret) {
3850                 printk(KERN_ERR DRV_NAME
3851                        "Unable to register rate control algorithm: %d\n", ret);
3852                 return ret;
3853         }
3854
3855         ret = pci_register_driver(&iwl_driver);
3856         if (ret) {
3857                 printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
3858                 goto error_register;
3859         }
3860
3861         return ret;
3862
3863 error_register:
3864         iwlagn_rate_control_unregister();
3865         return ret;
3866 }
3867
3868 static void __exit iwl_exit(void)
3869 {
3870         pci_unregister_driver(&iwl_driver);
3871         iwlagn_rate_control_unregister();
3872 }
3873
3874 module_exit(iwl_exit);
3875 module_init(iwl_init);
3876
3877 #ifdef CONFIG_IWLWIFI_DEBUG
3878 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
3879 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
3880 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3881 MODULE_PARM_DESC(debug, "debug output mask");
3882 #endif
3883