iwlwifi: move virtual interface pointer into context
[linux-2.6.git] / drivers / net / wireless / iwlwifi / iwl-6000.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
39
40 #include "iwl-eeprom.h"
41 #include "iwl-dev.h"
42 #include "iwl-core.h"
43 #include "iwl-io.h"
44 #include "iwl-sta.h"
45 #include "iwl-agn.h"
46 #include "iwl-helpers.h"
47 #include "iwl-agn-hw.h"
48 #include "iwl-6000-hw.h"
49 #include "iwl-agn-led.h"
50 #include "iwl-agn-debugfs.h"
51
52 /* Highest firmware API version supported */
53 #define IWL6000_UCODE_API_MAX 4
54 #define IWL6050_UCODE_API_MAX 4
55 #define IWL6000G2_UCODE_API_MAX 5
56
57 /* Lowest firmware API version supported */
58 #define IWL6000_UCODE_API_MIN 4
59 #define IWL6050_UCODE_API_MIN 4
60 #define IWL6000G2_UCODE_API_MIN 4
61
62 #define IWL6000_FW_PRE "iwlwifi-6000-"
63 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
64 #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
65
66 #define IWL6050_FW_PRE "iwlwifi-6050-"
67 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
68 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
69
70 #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
71 #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
72 #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
73
74 #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
75 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
76 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
77
78
79 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
80 {
81         /* want Celsius */
82         priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
83         priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
84 }
85
86 /* Indicate calibration version to uCode. */
87 static void iwl6000_set_calib_version(struct iwl_priv *priv)
88 {
89         if (priv->cfg->need_dc_calib &&
90             (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6))
91                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
92                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
93 }
94
95 /* NIC configuration for 6000 series */
96 static void iwl6000_nic_config(struct iwl_priv *priv)
97 {
98         u16 radio_cfg;
99
100         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
101
102         /* write radio config values to register */
103         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
104                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
105                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
106                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
107                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
108
109         /* set CSR_HW_CONFIG_REG for uCode use */
110         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
111                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
112                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
113
114         /* no locking required for register write */
115         if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
116                 /* 2x2 IPA phy type */
117                 iwl_write32(priv, CSR_GP_DRIVER_REG,
118                              CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
119         }
120         /* else do nothing, uCode configured */
121         if (priv->cfg->ops->lib->temp_ops.set_calib_version)
122                 priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
123 }
124
125 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
126         .min_nrg_cck = 97,
127         .max_nrg_cck = 0, /* not used, set to 0 */
128         .auto_corr_min_ofdm = 80,
129         .auto_corr_min_ofdm_mrc = 128,
130         .auto_corr_min_ofdm_x1 = 105,
131         .auto_corr_min_ofdm_mrc_x1 = 192,
132
133         .auto_corr_max_ofdm = 145,
134         .auto_corr_max_ofdm_mrc = 232,
135         .auto_corr_max_ofdm_x1 = 110,
136         .auto_corr_max_ofdm_mrc_x1 = 232,
137
138         .auto_corr_min_cck = 125,
139         .auto_corr_max_cck = 175,
140         .auto_corr_min_cck_mrc = 160,
141         .auto_corr_max_cck_mrc = 310,
142         .nrg_th_cck = 97,
143         .nrg_th_ofdm = 100,
144
145         .barker_corr_th_min = 190,
146         .barker_corr_th_min_mrc = 390,
147         .nrg_th_cca = 62,
148 };
149
150 static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
151 {
152         if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
153             priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
154                 priv->cfg->num_of_queues =
155                         priv->cfg->mod_params->num_of_queues;
156
157         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
158         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
159         priv->hw_params.scd_bc_tbls_size =
160                         priv->cfg->num_of_queues *
161                         sizeof(struct iwlagn_scd_bc_tbl);
162         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
163         priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
164         priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
165
166         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
167         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
168
169         priv->hw_params.max_bsm_size = 0;
170         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
171                                         BIT(IEEE80211_BAND_5GHZ);
172         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
173
174         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
175         priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
176         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
177         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
178
179         if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
180                 priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
181
182         /* Set initial sensitivity parameters */
183         /* Set initial calibration set */
184         priv->hw_params.sens = &iwl6000_sensitivity;
185         priv->hw_params.calib_init_cfg =
186                 BIT(IWL_CALIB_XTAL)             |
187                 BIT(IWL_CALIB_LO)               |
188                 BIT(IWL_CALIB_TX_IQ)            |
189                 BIT(IWL_CALIB_BASE_BAND);
190         if (priv->cfg->need_dc_calib)
191                 priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
192
193         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
194
195         return 0;
196 }
197
198 static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
199                                      struct ieee80211_channel_switch *ch_switch)
200 {
201         /*
202          * MULTI-FIXME
203          * See iwl_mac_channel_switch.
204          */
205         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
206         struct iwl6000_channel_switch_cmd cmd;
207         const struct iwl_channel_info *ch_info;
208         u32 switch_time_in_usec, ucode_switch_time;
209         u16 ch;
210         u32 tsf_low;
211         u8 switch_count;
212         u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
213         struct ieee80211_vif *vif = ctx->vif;
214         struct iwl_host_cmd hcmd = {
215                 .id = REPLY_CHANNEL_SWITCH,
216                 .len = sizeof(cmd),
217                 .flags = CMD_SYNC,
218                 .data = &cmd,
219         };
220
221         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
222         ch = ch_switch->channel->hw_value;
223         IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
224                       ctx->active.channel, ch);
225         cmd.channel = cpu_to_le16(ch);
226         cmd.rxon_flags = ctx->staging.flags;
227         cmd.rxon_filter_flags = ctx->staging.filter_flags;
228         switch_count = ch_switch->count;
229         tsf_low = ch_switch->timestamp & 0x0ffffffff;
230         /*
231          * calculate the ucode channel switch time
232          * adding TSF as one of the factor for when to switch
233          */
234         if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
235                 if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
236                     beacon_interval)) {
237                         switch_count -= (priv->ucode_beacon_time -
238                                 tsf_low) / beacon_interval;
239                 } else
240                         switch_count = 0;
241         }
242         if (switch_count <= 1)
243                 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
244         else {
245                 switch_time_in_usec =
246                         vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
247                 ucode_switch_time = iwl_usecs_to_beacons(priv,
248                                                          switch_time_in_usec,
249                                                          beacon_interval);
250                 cmd.switch_time = iwl_add_beacon_time(priv,
251                                                       priv->ucode_beacon_time,
252                                                       ucode_switch_time,
253                                                       beacon_interval);
254         }
255         IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
256                       cmd.switch_time);
257         ch_info = iwl_get_channel_info(priv, priv->band, ch);
258         if (ch_info)
259                 cmd.expect_beacon = is_channel_radar(ch_info);
260         else {
261                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
262                         ctx->active.channel, ch);
263                 return -EFAULT;
264         }
265         priv->switch_rxon.channel = cmd.channel;
266         priv->switch_rxon.switch_in_progress = true;
267
268         return iwl_send_cmd_sync(priv, &hcmd);
269 }
270
271 static struct iwl_lib_ops iwl6000_lib = {
272         .set_hw_params = iwl6000_hw_set_hw_params,
273         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
274         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
275         .txq_set_sched = iwlagn_txq_set_sched,
276         .txq_agg_enable = iwlagn_txq_agg_enable,
277         .txq_agg_disable = iwlagn_txq_agg_disable,
278         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
279         .txq_free_tfd = iwl_hw_txq_free_tfd,
280         .txq_init = iwl_hw_tx_queue_init,
281         .rx_handler_setup = iwlagn_rx_handler_setup,
282         .setup_deferred_work = iwlagn_setup_deferred_work,
283         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
284         .load_ucode = iwlagn_load_ucode,
285         .dump_nic_event_log = iwl_dump_nic_event_log,
286         .dump_nic_error_log = iwl_dump_nic_error_log,
287         .dump_csr = iwl_dump_csr,
288         .dump_fh = iwl_dump_fh,
289         .init_alive_start = iwlagn_init_alive_start,
290         .alive_notify = iwlagn_alive_notify,
291         .send_tx_power = iwlagn_send_tx_power,
292         .update_chain_flags = iwl_update_chain_flags,
293         .set_channel_switch = iwl6000_hw_channel_switch,
294         .apm_ops = {
295                 .init = iwl_apm_init,
296                 .stop = iwl_apm_stop,
297                 .config = iwl6000_nic_config,
298                 .set_pwr_src = iwl_set_pwr_src,
299         },
300         .eeprom_ops = {
301                 .regulatory_bands = {
302                         EEPROM_REG_BAND_1_CHANNELS,
303                         EEPROM_REG_BAND_2_CHANNELS,
304                         EEPROM_REG_BAND_3_CHANNELS,
305                         EEPROM_REG_BAND_4_CHANNELS,
306                         EEPROM_REG_BAND_5_CHANNELS,
307                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
308                         EEPROM_REG_BAND_52_HT40_CHANNELS
309                 },
310                 .verify_signature  = iwlcore_eeprom_verify_signature,
311                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
312                 .release_semaphore = iwlcore_eeprom_release_semaphore,
313                 .calib_version  = iwlagn_eeprom_calib_version,
314                 .query_addr = iwlagn_eeprom_query_addr,
315                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
316         },
317         .post_associate = iwl_post_associate,
318         .isr = iwl_isr_ict,
319         .config_ap = iwl_config_ap,
320         .temp_ops = {
321                 .temperature = iwlagn_temperature,
322                 .set_ct_kill = iwl6000_set_ct_threshold,
323                 .set_calib_version = iwl6000_set_calib_version,
324          },
325         .manage_ibss_station = iwlagn_manage_ibss_station,
326         .update_bcast_stations = iwl_update_bcast_stations,
327         .debugfs_ops = {
328                 .rx_stats_read = iwl_ucode_rx_stats_read,
329                 .tx_stats_read = iwl_ucode_tx_stats_read,
330                 .general_stats_read = iwl_ucode_general_stats_read,
331                 .bt_stats_read = iwl_ucode_bt_stats_read,
332         },
333         .recover_from_tx_stall = iwl_bg_monitor_recover,
334         .check_plcp_health = iwl_good_plcp_health,
335         .check_ack_health = iwl_good_ack_health,
336         .txfifo_flush = iwlagn_txfifo_flush,
337         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
338         .tt_ops = {
339                 .lower_power_detection = iwl_tt_is_low_power_state,
340                 .tt_power_mode = iwl_tt_current_power_mode,
341                 .ct_kill_check = iwl_check_for_ct_kill,
342         }
343 };
344
345 static struct iwl_lib_ops iwl6000g2b_lib = {
346         .set_hw_params = iwl6000_hw_set_hw_params,
347         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
348         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
349         .txq_set_sched = iwlagn_txq_set_sched,
350         .txq_agg_enable = iwlagn_txq_agg_enable,
351         .txq_agg_disable = iwlagn_txq_agg_disable,
352         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
353         .txq_free_tfd = iwl_hw_txq_free_tfd,
354         .txq_init = iwl_hw_tx_queue_init,
355         .rx_handler_setup = iwlagn_bt_rx_handler_setup,
356         .setup_deferred_work = iwlagn_bt_setup_deferred_work,
357         .cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
358         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
359         .load_ucode = iwlagn_load_ucode,
360         .dump_nic_event_log = iwl_dump_nic_event_log,
361         .dump_nic_error_log = iwl_dump_nic_error_log,
362         .dump_csr = iwl_dump_csr,
363         .dump_fh = iwl_dump_fh,
364         .init_alive_start = iwlagn_init_alive_start,
365         .alive_notify = iwlagn_alive_notify,
366         .send_tx_power = iwlagn_send_tx_power,
367         .update_chain_flags = iwl_update_chain_flags,
368         .set_channel_switch = iwl6000_hw_channel_switch,
369         .apm_ops = {
370                 .init = iwl_apm_init,
371                 .stop = iwl_apm_stop,
372                 .config = iwl6000_nic_config,
373                 .set_pwr_src = iwl_set_pwr_src,
374         },
375         .eeprom_ops = {
376                 .regulatory_bands = {
377                         EEPROM_REG_BAND_1_CHANNELS,
378                         EEPROM_REG_BAND_2_CHANNELS,
379                         EEPROM_REG_BAND_3_CHANNELS,
380                         EEPROM_REG_BAND_4_CHANNELS,
381                         EEPROM_REG_BAND_5_CHANNELS,
382                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
383                         EEPROM_REG_BAND_52_HT40_CHANNELS
384                 },
385                 .verify_signature  = iwlcore_eeprom_verify_signature,
386                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
387                 .release_semaphore = iwlcore_eeprom_release_semaphore,
388                 .calib_version  = iwlagn_eeprom_calib_version,
389                 .query_addr = iwlagn_eeprom_query_addr,
390                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
391         },
392         .post_associate = iwl_post_associate,
393         .isr = iwl_isr_ict,
394         .config_ap = iwl_config_ap,
395         .temp_ops = {
396                 .temperature = iwlagn_temperature,
397                 .set_ct_kill = iwl6000_set_ct_threshold,
398                 .set_calib_version = iwl6000_set_calib_version,
399          },
400         .manage_ibss_station = iwlagn_manage_ibss_station,
401         .update_bcast_stations = iwl_update_bcast_stations,
402         .debugfs_ops = {
403                 .rx_stats_read = iwl_ucode_rx_stats_read,
404                 .tx_stats_read = iwl_ucode_tx_stats_read,
405                 .general_stats_read = iwl_ucode_general_stats_read,
406                 .bt_stats_read = iwl_ucode_bt_stats_read,
407         },
408         .recover_from_tx_stall = iwl_bg_monitor_recover,
409         .check_plcp_health = iwl_good_plcp_health,
410         .check_ack_health = iwl_good_ack_health,
411         .txfifo_flush = iwlagn_txfifo_flush,
412         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
413         .tt_ops = {
414                 .lower_power_detection = iwl_tt_is_low_power_state,
415                 .tt_power_mode = iwl_tt_current_power_mode,
416                 .ct_kill_check = iwl_check_for_ct_kill,
417         }
418 };
419
420 static const struct iwl_ops iwl6000_ops = {
421         .lib = &iwl6000_lib,
422         .hcmd = &iwlagn_hcmd,
423         .utils = &iwlagn_hcmd_utils,
424         .led = &iwlagn_led_ops,
425 };
426
427 static const struct iwl_ops iwl6000g2b_ops = {
428         .lib = &iwl6000g2b_lib,
429         .hcmd = &iwlagn_bt_hcmd,
430         .utils = &iwlagn_hcmd_utils,
431         .led = &iwlagn_led_ops,
432 };
433
434 struct iwl_cfg iwl6000g2a_2agn_cfg = {
435         .name = "6000 Series 2x2 AGN Gen2a",
436         .fw_name_pre = IWL6000G2A_FW_PRE,
437         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
438         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
439         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
440         .ops = &iwl6000_ops,
441         .eeprom_size = OTP_LOW_IMAGE_SIZE,
442         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
443         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
444         .num_of_queues = IWLAGN_NUM_QUEUES,
445         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
446         .mod_params = &iwlagn_mod_params,
447         .valid_tx_ant = ANT_AB,
448         .valid_rx_ant = ANT_AB,
449         .pll_cfg_val = 0,
450         .set_l0s = true,
451         .use_bsm = false,
452         .pa_type = IWL_PA_SYSTEM,
453         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
454         .shadow_ram_support = true,
455         .ht_greenfield_support = true,
456         .led_compensation = 51,
457         .use_rts_for_aggregation = true, /* use rts/cts protection */
458         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
459         .supports_idle = true,
460         .adv_thermal_throttle = true,
461         .support_ct_kill_exit = true,
462         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
463         .chain_noise_scale = 1000,
464         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
465         .max_event_log_size = 512,
466         .ucode_tracing = true,
467         .sensitivity_calib_by_driver = true,
468         .chain_noise_calib_by_driver = true,
469         .need_dc_calib = true,
470 };
471
472 struct iwl_cfg iwl6000g2a_2abg_cfg = {
473         .name = "6000 Series 2x2 ABG Gen2a",
474         .fw_name_pre = IWL6000G2A_FW_PRE,
475         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
476         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
477         .sku = IWL_SKU_A|IWL_SKU_G,
478         .ops = &iwl6000_ops,
479         .eeprom_size = OTP_LOW_IMAGE_SIZE,
480         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
481         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
482         .num_of_queues = IWLAGN_NUM_QUEUES,
483         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
484         .mod_params = &iwlagn_mod_params,
485         .valid_tx_ant = ANT_AB,
486         .valid_rx_ant = ANT_AB,
487         .pll_cfg_val = 0,
488         .set_l0s = true,
489         .use_bsm = false,
490         .pa_type = IWL_PA_SYSTEM,
491         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
492         .shadow_ram_support = true,
493         .led_compensation = 51,
494         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
495         .supports_idle = true,
496         .adv_thermal_throttle = true,
497         .support_ct_kill_exit = true,
498         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
499         .chain_noise_scale = 1000,
500         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
501         .max_event_log_size = 512,
502         .sensitivity_calib_by_driver = true,
503         .chain_noise_calib_by_driver = true,
504         .need_dc_calib = true,
505 };
506
507 struct iwl_cfg iwl6000g2a_2bg_cfg = {
508         .name = "6000 Series 2x2 BG Gen2a",
509         .fw_name_pre = IWL6000G2A_FW_PRE,
510         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
511         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
512         .sku = IWL_SKU_G,
513         .ops = &iwl6000_ops,
514         .eeprom_size = OTP_LOW_IMAGE_SIZE,
515         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
516         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
517         .num_of_queues = IWLAGN_NUM_QUEUES,
518         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
519         .mod_params = &iwlagn_mod_params,
520         .valid_tx_ant = ANT_AB,
521         .valid_rx_ant = ANT_AB,
522         .pll_cfg_val = 0,
523         .set_l0s = true,
524         .use_bsm = false,
525         .pa_type = IWL_PA_SYSTEM,
526         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
527         .shadow_ram_support = true,
528         .led_compensation = 51,
529         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
530         .supports_idle = true,
531         .adv_thermal_throttle = true,
532         .support_ct_kill_exit = true,
533         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
534         .chain_noise_scale = 1000,
535         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
536         .max_event_log_size = 512,
537         .sensitivity_calib_by_driver = true,
538         .chain_noise_calib_by_driver = true,
539         .need_dc_calib = true,
540 };
541
542 struct iwl_cfg iwl6000g2b_2agn_cfg = {
543         .name = "6000 Series 2x2 AGN Gen2b",
544         .fw_name_pre = IWL6000G2B_FW_PRE,
545         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
546         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
547         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
548         .ops = &iwl6000g2b_ops,
549         .eeprom_size = OTP_LOW_IMAGE_SIZE,
550         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
551         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
552         .num_of_queues = IWLAGN_NUM_QUEUES,
553         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
554         .mod_params = &iwlagn_mod_params,
555         .valid_tx_ant = ANT_AB,
556         .valid_rx_ant = ANT_AB,
557         .pll_cfg_val = 0,
558         .set_l0s = true,
559         .use_bsm = false,
560         .pa_type = IWL_PA_SYSTEM,
561         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
562         .shadow_ram_support = true,
563         .ht_greenfield_support = true,
564         .led_compensation = 51,
565         .use_rts_for_aggregation = true, /* use rts/cts protection */
566         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
567         .supports_idle = true,
568         .adv_thermal_throttle = true,
569         .support_ct_kill_exit = true,
570         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
571         .chain_noise_scale = 1000,
572         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
573         .max_event_log_size = 512,
574         .sensitivity_calib_by_driver = true,
575         .chain_noise_calib_by_driver = true,
576         .need_dc_calib = true,
577         .bt_statistics = true,
578         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
579         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
580         .advanced_bt_coexist = true,
581         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
582         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
583 };
584
585 struct iwl_cfg iwl6000g2b_2abg_cfg = {
586         .name = "6000 Series 2x2 ABG Gen2b",
587         .fw_name_pre = IWL6000G2B_FW_PRE,
588         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
589         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
590         .sku = IWL_SKU_A|IWL_SKU_G,
591         .ops = &iwl6000g2b_ops,
592         .eeprom_size = OTP_LOW_IMAGE_SIZE,
593         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
594         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
595         .num_of_queues = IWLAGN_NUM_QUEUES,
596         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
597         .mod_params = &iwlagn_mod_params,
598         .valid_tx_ant = ANT_AB,
599         .valid_rx_ant = ANT_AB,
600         .pll_cfg_val = 0,
601         .set_l0s = true,
602         .use_bsm = false,
603         .pa_type = IWL_PA_SYSTEM,
604         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
605         .shadow_ram_support = true,
606         .led_compensation = 51,
607         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
608         .supports_idle = true,
609         .adv_thermal_throttle = true,
610         .support_ct_kill_exit = true,
611         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
612         .chain_noise_scale = 1000,
613         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
614         .max_event_log_size = 512,
615         .sensitivity_calib_by_driver = true,
616         .chain_noise_calib_by_driver = true,
617         .need_dc_calib = true,
618         .bt_statistics = true,
619         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
620         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
621         .advanced_bt_coexist = true,
622         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
623         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
624 };
625
626 struct iwl_cfg iwl6000g2b_2bgn_cfg = {
627         .name = "6000 Series 2x2 BGN Gen2b",
628         .fw_name_pre = IWL6000G2B_FW_PRE,
629         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
630         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
631         .sku = IWL_SKU_G|IWL_SKU_N,
632         .ops = &iwl6000g2b_ops,
633         .eeprom_size = OTP_LOW_IMAGE_SIZE,
634         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
635         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
636         .num_of_queues = IWLAGN_NUM_QUEUES,
637         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
638         .mod_params = &iwlagn_mod_params,
639         .valid_tx_ant = ANT_AB,
640         .valid_rx_ant = ANT_AB,
641         .pll_cfg_val = 0,
642         .set_l0s = true,
643         .use_bsm = false,
644         .pa_type = IWL_PA_SYSTEM,
645         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
646         .shadow_ram_support = true,
647         .ht_greenfield_support = true,
648         .led_compensation = 51,
649         .use_rts_for_aggregation = true, /* use rts/cts protection */
650         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
651         .supports_idle = true,
652         .adv_thermal_throttle = true,
653         .support_ct_kill_exit = true,
654         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
655         .chain_noise_scale = 1000,
656         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
657         .max_event_log_size = 512,
658         .sensitivity_calib_by_driver = true,
659         .chain_noise_calib_by_driver = true,
660         .need_dc_calib = true,
661         .bt_statistics = true,
662         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
663         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
664         .advanced_bt_coexist = true,
665         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
666         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
667 };
668
669 struct iwl_cfg iwl6000g2b_2bg_cfg = {
670         .name = "6000 Series 2x2 BG Gen2b",
671         .fw_name_pre = IWL6000G2B_FW_PRE,
672         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
673         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
674         .sku = IWL_SKU_G,
675         .ops = &iwl6000g2b_ops,
676         .eeprom_size = OTP_LOW_IMAGE_SIZE,
677         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
678         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
679         .num_of_queues = IWLAGN_NUM_QUEUES,
680         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
681         .mod_params = &iwlagn_mod_params,
682         .valid_tx_ant = ANT_AB,
683         .valid_rx_ant = ANT_AB,
684         .pll_cfg_val = 0,
685         .set_l0s = true,
686         .use_bsm = false,
687         .pa_type = IWL_PA_SYSTEM,
688         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
689         .shadow_ram_support = true,
690         .led_compensation = 51,
691         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
692         .supports_idle = true,
693         .adv_thermal_throttle = true,
694         .support_ct_kill_exit = true,
695         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
696         .chain_noise_scale = 1000,
697         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
698         .max_event_log_size = 512,
699         .sensitivity_calib_by_driver = true,
700         .chain_noise_calib_by_driver = true,
701         .need_dc_calib = true,
702         .bt_statistics = true,
703         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
704         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
705         .advanced_bt_coexist = true,
706         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
707         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
708 };
709
710 struct iwl_cfg iwl6000g2b_bgn_cfg = {
711         .name = "6000 Series 1x2 BGN Gen2b",
712         .fw_name_pre = IWL6000G2B_FW_PRE,
713         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
714         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
715         .sku = IWL_SKU_G|IWL_SKU_N,
716         .ops = &iwl6000g2b_ops,
717         .eeprom_size = OTP_LOW_IMAGE_SIZE,
718         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
719         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
720         .num_of_queues = IWLAGN_NUM_QUEUES,
721         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
722         .mod_params = &iwlagn_mod_params,
723         .valid_tx_ant = ANT_A,
724         .valid_rx_ant = ANT_AB,
725         .pll_cfg_val = 0,
726         .set_l0s = true,
727         .use_bsm = false,
728         .pa_type = IWL_PA_SYSTEM,
729         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
730         .shadow_ram_support = true,
731         .ht_greenfield_support = true,
732         .led_compensation = 51,
733         .use_rts_for_aggregation = true, /* use rts/cts protection */
734         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
735         .supports_idle = true,
736         .adv_thermal_throttle = true,
737         .support_ct_kill_exit = true,
738         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
739         .chain_noise_scale = 1000,
740         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
741         .max_event_log_size = 512,
742         .sensitivity_calib_by_driver = true,
743         .chain_noise_calib_by_driver = true,
744         .need_dc_calib = true,
745         .bt_statistics = true,
746         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
747         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
748         .advanced_bt_coexist = true,
749         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
750         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
751 };
752
753 struct iwl_cfg iwl6000g2b_bg_cfg = {
754         .name = "6000 Series 1x2 BG Gen2b",
755         .fw_name_pre = IWL6000G2B_FW_PRE,
756         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
757         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
758         .sku = IWL_SKU_G,
759         .ops = &iwl6000g2b_ops,
760         .eeprom_size = OTP_LOW_IMAGE_SIZE,
761         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
762         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
763         .num_of_queues = IWLAGN_NUM_QUEUES,
764         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
765         .mod_params = &iwlagn_mod_params,
766         .valid_tx_ant = ANT_A,
767         .valid_rx_ant = ANT_AB,
768         .pll_cfg_val = 0,
769         .set_l0s = true,
770         .use_bsm = false,
771         .pa_type = IWL_PA_SYSTEM,
772         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
773         .shadow_ram_support = true,
774         .led_compensation = 51,
775         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
776         .supports_idle = true,
777         .adv_thermal_throttle = true,
778         .support_ct_kill_exit = true,
779         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
780         .chain_noise_scale = 1000,
781         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
782         .max_event_log_size = 512,
783         .sensitivity_calib_by_driver = true,
784         .chain_noise_calib_by_driver = true,
785         .need_dc_calib = true,
786         .bt_statistics = true,
787         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
788         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
789         .advanced_bt_coexist = true,
790         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
791         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
792 };
793
794 /*
795  * "i": Internal configuration, use internal Power Amplifier
796  */
797 struct iwl_cfg iwl6000i_2agn_cfg = {
798         .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
799         .fw_name_pre = IWL6000_FW_PRE,
800         .ucode_api_max = IWL6000_UCODE_API_MAX,
801         .ucode_api_min = IWL6000_UCODE_API_MIN,
802         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
803         .ops = &iwl6000_ops,
804         .eeprom_size = OTP_LOW_IMAGE_SIZE,
805         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
806         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
807         .num_of_queues = IWLAGN_NUM_QUEUES,
808         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
809         .mod_params = &iwlagn_mod_params,
810         .valid_tx_ant = ANT_BC,
811         .valid_rx_ant = ANT_BC,
812         .pll_cfg_val = 0,
813         .set_l0s = true,
814         .use_bsm = false,
815         .pa_type = IWL_PA_INTERNAL,
816         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
817         .shadow_ram_support = true,
818         .ht_greenfield_support = true,
819         .led_compensation = 51,
820         .use_rts_for_aggregation = true, /* use rts/cts protection */
821         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
822         .supports_idle = true,
823         .adv_thermal_throttle = true,
824         .support_ct_kill_exit = true,
825         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
826         .chain_noise_scale = 1000,
827         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
828         .max_event_log_size = 1024,
829         .ucode_tracing = true,
830         .sensitivity_calib_by_driver = true,
831         .chain_noise_calib_by_driver = true,
832 };
833
834 struct iwl_cfg iwl6000i_2abg_cfg = {
835         .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
836         .fw_name_pre = IWL6000_FW_PRE,
837         .ucode_api_max = IWL6000_UCODE_API_MAX,
838         .ucode_api_min = IWL6000_UCODE_API_MIN,
839         .sku = IWL_SKU_A|IWL_SKU_G,
840         .ops = &iwl6000_ops,
841         .eeprom_size = OTP_LOW_IMAGE_SIZE,
842         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
843         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
844         .num_of_queues = IWLAGN_NUM_QUEUES,
845         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
846         .mod_params = &iwlagn_mod_params,
847         .valid_tx_ant = ANT_BC,
848         .valid_rx_ant = ANT_BC,
849         .pll_cfg_val = 0,
850         .set_l0s = true,
851         .use_bsm = false,
852         .pa_type = IWL_PA_INTERNAL,
853         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
854         .shadow_ram_support = true,
855         .led_compensation = 51,
856         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
857         .supports_idle = true,
858         .adv_thermal_throttle = true,
859         .support_ct_kill_exit = true,
860         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
861         .chain_noise_scale = 1000,
862         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
863         .max_event_log_size = 1024,
864         .ucode_tracing = true,
865         .sensitivity_calib_by_driver = true,
866         .chain_noise_calib_by_driver = true,
867 };
868
869 struct iwl_cfg iwl6000i_2bg_cfg = {
870         .name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
871         .fw_name_pre = IWL6000_FW_PRE,
872         .ucode_api_max = IWL6000_UCODE_API_MAX,
873         .ucode_api_min = IWL6000_UCODE_API_MIN,
874         .sku = IWL_SKU_G,
875         .ops = &iwl6000_ops,
876         .eeprom_size = OTP_LOW_IMAGE_SIZE,
877         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
878         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
879         .num_of_queues = IWLAGN_NUM_QUEUES,
880         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
881         .mod_params = &iwlagn_mod_params,
882         .valid_tx_ant = ANT_BC,
883         .valid_rx_ant = ANT_BC,
884         .pll_cfg_val = 0,
885         .set_l0s = true,
886         .use_bsm = false,
887         .pa_type = IWL_PA_INTERNAL,
888         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
889         .shadow_ram_support = true,
890         .led_compensation = 51,
891         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
892         .supports_idle = true,
893         .adv_thermal_throttle = true,
894         .support_ct_kill_exit = true,
895         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
896         .chain_noise_scale = 1000,
897         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
898         .max_event_log_size = 1024,
899         .ucode_tracing = true,
900         .sensitivity_calib_by_driver = true,
901         .chain_noise_calib_by_driver = true,
902 };
903
904 struct iwl_cfg iwl6050_2agn_cfg = {
905         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
906         .fw_name_pre = IWL6050_FW_PRE,
907         .ucode_api_max = IWL6050_UCODE_API_MAX,
908         .ucode_api_min = IWL6050_UCODE_API_MIN,
909         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
910         .ops = &iwl6000_ops,
911         .eeprom_size = OTP_LOW_IMAGE_SIZE,
912         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
913         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
914         .num_of_queues = IWLAGN_NUM_QUEUES,
915         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
916         .mod_params = &iwlagn_mod_params,
917         .valid_tx_ant = ANT_AB,
918         .valid_rx_ant = ANT_AB,
919         .pll_cfg_val = 0,
920         .set_l0s = true,
921         .use_bsm = false,
922         .pa_type = IWL_PA_SYSTEM,
923         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
924         .shadow_ram_support = true,
925         .ht_greenfield_support = true,
926         .led_compensation = 51,
927         .use_rts_for_aggregation = true, /* use rts/cts protection */
928         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
929         .supports_idle = true,
930         .adv_thermal_throttle = true,
931         .support_ct_kill_exit = true,
932         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
933         .chain_noise_scale = 1500,
934         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
935         .max_event_log_size = 1024,
936         .ucode_tracing = true,
937         .sensitivity_calib_by_driver = true,
938         .chain_noise_calib_by_driver = true,
939         .need_dc_calib = true,
940 };
941
942 struct iwl_cfg iwl6050g2_bgn_cfg = {
943         .name = "6050 Series 1x2 BGN Gen2",
944         .fw_name_pre = IWL6050_FW_PRE,
945         .ucode_api_max = IWL6050_UCODE_API_MAX,
946         .ucode_api_min = IWL6050_UCODE_API_MIN,
947         .sku = IWL_SKU_G|IWL_SKU_N,
948         .ops = &iwl6000_ops,
949         .eeprom_size = OTP_LOW_IMAGE_SIZE,
950         .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
951         .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
952         .num_of_queues = IWLAGN_NUM_QUEUES,
953         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
954         .mod_params = &iwlagn_mod_params,
955         .valid_tx_ant = ANT_A,
956         .valid_rx_ant = ANT_AB,
957         .pll_cfg_val = 0,
958         .set_l0s = true,
959         .use_bsm = false,
960         .pa_type = IWL_PA_SYSTEM,
961         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
962         .shadow_ram_support = true,
963         .ht_greenfield_support = true,
964         .led_compensation = 51,
965         .use_rts_for_aggregation = true, /* use rts/cts protection */
966         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
967         .supports_idle = true,
968         .adv_thermal_throttle = true,
969         .support_ct_kill_exit = true,
970         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
971         .chain_noise_scale = 1500,
972         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
973         .max_event_log_size = 1024,
974         .ucode_tracing = true,
975         .sensitivity_calib_by_driver = true,
976         .chain_noise_calib_by_driver = true,
977         .need_dc_calib = true,
978 };
979
980 struct iwl_cfg iwl6050_2abg_cfg = {
981         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
982         .fw_name_pre = IWL6050_FW_PRE,
983         .ucode_api_max = IWL6050_UCODE_API_MAX,
984         .ucode_api_min = IWL6050_UCODE_API_MIN,
985         .sku = IWL_SKU_A|IWL_SKU_G,
986         .ops = &iwl6000_ops,
987         .eeprom_size = OTP_LOW_IMAGE_SIZE,
988         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
989         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
990         .num_of_queues = IWLAGN_NUM_QUEUES,
991         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
992         .mod_params = &iwlagn_mod_params,
993         .valid_tx_ant = ANT_AB,
994         .valid_rx_ant = ANT_AB,
995         .pll_cfg_val = 0,
996         .set_l0s = true,
997         .use_bsm = false,
998         .pa_type = IWL_PA_SYSTEM,
999         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
1000         .shadow_ram_support = true,
1001         .led_compensation = 51,
1002         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
1003         .supports_idle = true,
1004         .adv_thermal_throttle = true,
1005         .support_ct_kill_exit = true,
1006         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
1007         .chain_noise_scale = 1500,
1008         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
1009         .max_event_log_size = 1024,
1010         .ucode_tracing = true,
1011         .sensitivity_calib_by_driver = true,
1012         .chain_noise_calib_by_driver = true,
1013         .need_dc_calib = true,
1014 };
1015
1016 struct iwl_cfg iwl6000_3agn_cfg = {
1017         .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
1018         .fw_name_pre = IWL6000_FW_PRE,
1019         .ucode_api_max = IWL6000_UCODE_API_MAX,
1020         .ucode_api_min = IWL6000_UCODE_API_MIN,
1021         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
1022         .ops = &iwl6000_ops,
1023         .eeprom_size = OTP_LOW_IMAGE_SIZE,
1024         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
1025         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
1026         .num_of_queues = IWLAGN_NUM_QUEUES,
1027         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
1028         .mod_params = &iwlagn_mod_params,
1029         .valid_tx_ant = ANT_ABC,
1030         .valid_rx_ant = ANT_ABC,
1031         .pll_cfg_val = 0,
1032         .set_l0s = true,
1033         .use_bsm = false,
1034         .pa_type = IWL_PA_SYSTEM,
1035         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
1036         .shadow_ram_support = true,
1037         .ht_greenfield_support = true,
1038         .led_compensation = 51,
1039         .use_rts_for_aggregation = true, /* use rts/cts protection */
1040         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
1041         .supports_idle = true,
1042         .adv_thermal_throttle = true,
1043         .support_ct_kill_exit = true,
1044         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
1045         .chain_noise_scale = 1000,
1046         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
1047         .max_event_log_size = 1024,
1048         .ucode_tracing = true,
1049         .sensitivity_calib_by_driver = true,
1050         .chain_noise_calib_by_driver = true,
1051 };
1052
1053 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
1054 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
1055 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
1056 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));