b6468e962115e64f3f25fa62031b3b10219366ef
[linux-2.6.git] / drivers / net / wireless / iwlwifi / iwl-6000.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
39
40 #include "iwl-eeprom.h"
41 #include "iwl-dev.h"
42 #include "iwl-core.h"
43 #include "iwl-io.h"
44 #include "iwl-sta.h"
45 #include "iwl-agn.h"
46 #include "iwl-helpers.h"
47 #include "iwl-agn-hw.h"
48 #include "iwl-6000-hw.h"
49 #include "iwl-agn-led.h"
50 #include "iwl-agn-debugfs.h"
51
52 /* Highest firmware API version supported */
53 #define IWL6000_UCODE_API_MAX 4
54 #define IWL6050_UCODE_API_MAX 4
55 #define IWL6000G2_UCODE_API_MAX 4
56
57 /* Lowest firmware API version supported */
58 #define IWL6000_UCODE_API_MIN 4
59 #define IWL6050_UCODE_API_MIN 4
60 #define IWL6000G2_UCODE_API_MIN 4
61
62 #define IWL6000_FW_PRE "iwlwifi-6000-"
63 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
64 #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
65
66 #define IWL6050_FW_PRE "iwlwifi-6050-"
67 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
68 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
69
70 #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
71 #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
72 #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
73
74 #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
75 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
76 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
77
78
79 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
80 {
81         /* want Celsius */
82         priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
83         priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
84 }
85
86 /* Indicate calibration version to uCode. */
87 static void iwl6000_set_calib_version(struct iwl_priv *priv)
88 {
89         if (priv->cfg->need_dc_calib &&
90             (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6))
91                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
92                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
93 }
94
95 /* NIC configuration for 6000 series */
96 static void iwl6000_nic_config(struct iwl_priv *priv)
97 {
98         u16 radio_cfg;
99
100         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
101
102         /* write radio config values to register */
103         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
104                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
105                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
106                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
107                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
108
109         /* set CSR_HW_CONFIG_REG for uCode use */
110         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
111                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
112                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
113
114         /* no locking required for register write */
115         if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
116                 /* 2x2 IPA phy type */
117                 iwl_write32(priv, CSR_GP_DRIVER_REG,
118                              CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
119         }
120         /* else do nothing, uCode configured */
121         if (priv->cfg->ops->lib->temp_ops.set_calib_version)
122                 priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
123 }
124
125 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
126         .min_nrg_cck = 97,
127         .max_nrg_cck = 0, /* not used, set to 0 */
128         .auto_corr_min_ofdm = 80,
129         .auto_corr_min_ofdm_mrc = 128,
130         .auto_corr_min_ofdm_x1 = 105,
131         .auto_corr_min_ofdm_mrc_x1 = 192,
132
133         .auto_corr_max_ofdm = 145,
134         .auto_corr_max_ofdm_mrc = 232,
135         .auto_corr_max_ofdm_x1 = 110,
136         .auto_corr_max_ofdm_mrc_x1 = 232,
137
138         .auto_corr_min_cck = 125,
139         .auto_corr_max_cck = 175,
140         .auto_corr_min_cck_mrc = 160,
141         .auto_corr_max_cck_mrc = 310,
142         .nrg_th_cck = 97,
143         .nrg_th_ofdm = 100,
144
145         .barker_corr_th_min = 190,
146         .barker_corr_th_min_mrc = 390,
147         .nrg_th_cca = 62,
148 };
149
150 static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
151 {
152         if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
153             priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
154                 priv->cfg->num_of_queues =
155                         priv->cfg->mod_params->num_of_queues;
156
157         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
158         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
159         priv->hw_params.scd_bc_tbls_size =
160                         priv->cfg->num_of_queues *
161                         sizeof(struct iwlagn_scd_bc_tbl);
162         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
163         priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
164         priv->hw_params.bcast_sta_id = IWLAGN_BROADCAST_ID;
165
166         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
167         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
168
169         priv->hw_params.max_bsm_size = 0;
170         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
171                                         BIT(IEEE80211_BAND_5GHZ);
172         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
173
174         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
175         priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
176         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
177         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
178
179         if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
180                 priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
181
182         /* Set initial sensitivity parameters */
183         /* Set initial calibration set */
184         priv->hw_params.sens = &iwl6000_sensitivity;
185         priv->hw_params.calib_init_cfg =
186                 BIT(IWL_CALIB_XTAL)             |
187                 BIT(IWL_CALIB_LO)               |
188                 BIT(IWL_CALIB_TX_IQ)            |
189                 BIT(IWL_CALIB_BASE_BAND);
190         if (priv->cfg->need_dc_calib)
191                 priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
192
193         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
194
195         return 0;
196 }
197
198 static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
199                                      struct ieee80211_channel_switch *ch_switch)
200 {
201         struct iwl6000_channel_switch_cmd cmd;
202         const struct iwl_channel_info *ch_info;
203         u32 switch_time_in_usec, ucode_switch_time;
204         u16 ch;
205         u32 tsf_low;
206         u8 switch_count;
207         u16 beacon_interval = le16_to_cpu(priv->rxon_timing.beacon_interval);
208         struct ieee80211_vif *vif = priv->vif;
209         struct iwl_host_cmd hcmd = {
210                 .id = REPLY_CHANNEL_SWITCH,
211                 .len = sizeof(cmd),
212                 .flags = CMD_SYNC,
213                 .data = &cmd,
214         };
215
216         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
217         ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq);
218         IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
219                       priv->active_rxon.channel, ch);
220         cmd.channel = cpu_to_le16(ch);
221         cmd.rxon_flags = priv->staging_rxon.flags;
222         cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
223         switch_count = ch_switch->count;
224         tsf_low = ch_switch->timestamp & 0x0ffffffff;
225         /*
226          * calculate the ucode channel switch time
227          * adding TSF as one of the factor for when to switch
228          */
229         if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
230                 if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
231                     beacon_interval)) {
232                         switch_count -= (priv->ucode_beacon_time -
233                                 tsf_low) / beacon_interval;
234                 } else
235                         switch_count = 0;
236         }
237         if (switch_count <= 1)
238                 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
239         else {
240                 switch_time_in_usec =
241                         vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
242                 ucode_switch_time = iwl_usecs_to_beacons(priv,
243                                                          switch_time_in_usec,
244                                                          beacon_interval);
245                 cmd.switch_time = iwl_add_beacon_time(priv,
246                                                       priv->ucode_beacon_time,
247                                                       ucode_switch_time,
248                                                       beacon_interval);
249         }
250         IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
251                       cmd.switch_time);
252         ch_info = iwl_get_channel_info(priv, priv->band, ch);
253         if (ch_info)
254                 cmd.expect_beacon = is_channel_radar(ch_info);
255         else {
256                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
257                         priv->active_rxon.channel, ch);
258                 return -EFAULT;
259         }
260         priv->switch_rxon.channel = cmd.channel;
261         priv->switch_rxon.switch_in_progress = true;
262
263         return iwl_send_cmd_sync(priv, &hcmd);
264 }
265
266 static struct iwl_lib_ops iwl6000_lib = {
267         .set_hw_params = iwl6000_hw_set_hw_params,
268         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
269         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
270         .txq_set_sched = iwlagn_txq_set_sched,
271         .txq_agg_enable = iwlagn_txq_agg_enable,
272         .txq_agg_disable = iwlagn_txq_agg_disable,
273         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
274         .txq_free_tfd = iwl_hw_txq_free_tfd,
275         .txq_init = iwl_hw_tx_queue_init,
276         .rx_handler_setup = iwlagn_rx_handler_setup,
277         .setup_deferred_work = iwlagn_setup_deferred_work,
278         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
279         .load_ucode = iwlagn_load_ucode,
280         .dump_nic_event_log = iwl_dump_nic_event_log,
281         .dump_nic_error_log = iwl_dump_nic_error_log,
282         .dump_csr = iwl_dump_csr,
283         .dump_fh = iwl_dump_fh,
284         .init_alive_start = iwlagn_init_alive_start,
285         .alive_notify = iwlagn_alive_notify,
286         .send_tx_power = iwlagn_send_tx_power,
287         .update_chain_flags = iwl_update_chain_flags,
288         .set_channel_switch = iwl6000_hw_channel_switch,
289         .apm_ops = {
290                 .init = iwl_apm_init,
291                 .stop = iwl_apm_stop,
292                 .config = iwl6000_nic_config,
293                 .set_pwr_src = iwl_set_pwr_src,
294         },
295         .eeprom_ops = {
296                 .regulatory_bands = {
297                         EEPROM_REG_BAND_1_CHANNELS,
298                         EEPROM_REG_BAND_2_CHANNELS,
299                         EEPROM_REG_BAND_3_CHANNELS,
300                         EEPROM_REG_BAND_4_CHANNELS,
301                         EEPROM_REG_BAND_5_CHANNELS,
302                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
303                         EEPROM_REG_BAND_52_HT40_CHANNELS
304                 },
305                 .verify_signature  = iwlcore_eeprom_verify_signature,
306                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
307                 .release_semaphore = iwlcore_eeprom_release_semaphore,
308                 .calib_version  = iwlagn_eeprom_calib_version,
309                 .query_addr = iwlagn_eeprom_query_addr,
310                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
311         },
312         .post_associate = iwl_post_associate,
313         .isr = iwl_isr_ict,
314         .config_ap = iwl_config_ap,
315         .temp_ops = {
316                 .temperature = iwlagn_temperature,
317                 .set_ct_kill = iwl6000_set_ct_threshold,
318                 .set_calib_version = iwl6000_set_calib_version,
319          },
320         .manage_ibss_station = iwlagn_manage_ibss_station,
321         .update_bcast_station = iwl_update_bcast_station,
322         .debugfs_ops = {
323                 .rx_stats_read = iwl_ucode_rx_stats_read,
324                 .tx_stats_read = iwl_ucode_tx_stats_read,
325                 .general_stats_read = iwl_ucode_general_stats_read,
326                 .bt_stats_read = iwl_ucode_bt_stats_read,
327         },
328         .recover_from_tx_stall = iwl_bg_monitor_recover,
329         .check_plcp_health = iwl_good_plcp_health,
330         .check_ack_health = iwl_good_ack_health,
331         .txfifo_flush = iwlagn_txfifo_flush,
332         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
333 };
334
335 static const struct iwl_ops iwl6000_ops = {
336         .lib = &iwl6000_lib,
337         .hcmd = &iwlagn_hcmd,
338         .utils = &iwlagn_hcmd_utils,
339         .led = &iwlagn_led_ops,
340 };
341
342 static void do_not_send_bt_config(struct iwl_priv *priv)
343 {
344 }
345
346 static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
347         .rxon_assoc = iwlagn_send_rxon_assoc,
348         .commit_rxon = iwl_commit_rxon,
349         .set_rxon_chain = iwl_set_rxon_chain,
350         .set_tx_ant = iwlagn_send_tx_ant_config,
351         .send_bt_config = do_not_send_bt_config,
352 };
353
354 static const struct iwl_ops iwl6000g2b_ops = {
355         .lib = &iwl6000_lib,
356         .hcmd = &iwl6000g2b_hcmd,
357         .utils = &iwlagn_hcmd_utils,
358         .led = &iwlagn_led_ops,
359 };
360
361 struct iwl_cfg iwl6000g2a_2agn_cfg = {
362         .name = "6000 Series 2x2 AGN Gen2a",
363         .fw_name_pre = IWL6000G2A_FW_PRE,
364         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
365         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
366         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
367         .ops = &iwl6000_ops,
368         .eeprom_size = OTP_LOW_IMAGE_SIZE,
369         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
370         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
371         .num_of_queues = IWLAGN_NUM_QUEUES,
372         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
373         .mod_params = &iwlagn_mod_params,
374         .valid_tx_ant = ANT_AB,
375         .valid_rx_ant = ANT_AB,
376         .pll_cfg_val = 0,
377         .set_l0s = true,
378         .use_bsm = false,
379         .pa_type = IWL_PA_SYSTEM,
380         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
381         .shadow_ram_support = true,
382         .ht_greenfield_support = true,
383         .led_compensation = 51,
384         .use_rts_for_aggregation = true, /* use rts/cts protection */
385         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
386         .supports_idle = true,
387         .adv_thermal_throttle = true,
388         .support_ct_kill_exit = true,
389         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
390         .chain_noise_scale = 1000,
391         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
392         .max_event_log_size = 512,
393         .ucode_tracing = true,
394         .sensitivity_calib_by_driver = true,
395         .chain_noise_calib_by_driver = true,
396         .need_dc_calib = true,
397 };
398
399 struct iwl_cfg iwl6000g2a_2abg_cfg = {
400         .name = "6000 Series 2x2 ABG Gen2a",
401         .fw_name_pre = IWL6000G2A_FW_PRE,
402         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
403         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
404         .sku = IWL_SKU_A|IWL_SKU_G,
405         .ops = &iwl6000_ops,
406         .eeprom_size = OTP_LOW_IMAGE_SIZE,
407         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
408         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
409         .num_of_queues = IWLAGN_NUM_QUEUES,
410         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
411         .mod_params = &iwlagn_mod_params,
412         .valid_tx_ant = ANT_AB,
413         .valid_rx_ant = ANT_AB,
414         .pll_cfg_val = 0,
415         .set_l0s = true,
416         .use_bsm = false,
417         .pa_type = IWL_PA_SYSTEM,
418         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
419         .shadow_ram_support = true,
420         .led_compensation = 51,
421         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
422         .supports_idle = true,
423         .adv_thermal_throttle = true,
424         .support_ct_kill_exit = true,
425         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
426         .chain_noise_scale = 1000,
427         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
428         .max_event_log_size = 512,
429         .sensitivity_calib_by_driver = true,
430         .chain_noise_calib_by_driver = true,
431         .need_dc_calib = true,
432 };
433
434 struct iwl_cfg iwl6000g2a_2bg_cfg = {
435         .name = "6000 Series 2x2 BG Gen2a",
436         .fw_name_pre = IWL6000G2A_FW_PRE,
437         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
438         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
439         .sku = IWL_SKU_G,
440         .ops = &iwl6000_ops,
441         .eeprom_size = OTP_LOW_IMAGE_SIZE,
442         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
443         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
444         .num_of_queues = IWLAGN_NUM_QUEUES,
445         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
446         .mod_params = &iwlagn_mod_params,
447         .valid_tx_ant = ANT_AB,
448         .valid_rx_ant = ANT_AB,
449         .pll_cfg_val = 0,
450         .set_l0s = true,
451         .use_bsm = false,
452         .pa_type = IWL_PA_SYSTEM,
453         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
454         .shadow_ram_support = true,
455         .led_compensation = 51,
456         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
457         .supports_idle = true,
458         .adv_thermal_throttle = true,
459         .support_ct_kill_exit = true,
460         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
461         .chain_noise_scale = 1000,
462         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
463         .max_event_log_size = 512,
464         .sensitivity_calib_by_driver = true,
465         .chain_noise_calib_by_driver = true,
466         .need_dc_calib = true,
467 };
468
469 struct iwl_cfg iwl6000g2b_2agn_cfg = {
470         .name = "6000 Series 2x2 AGN Gen2b",
471         .fw_name_pre = IWL6000G2B_FW_PRE,
472         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
473         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
474         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
475         .ops = &iwl6000g2b_ops,
476         .eeprom_size = OTP_LOW_IMAGE_SIZE,
477         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
478         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
479         .num_of_queues = IWLAGN_NUM_QUEUES,
480         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
481         .mod_params = &iwlagn_mod_params,
482         .valid_tx_ant = ANT_AB,
483         .valid_rx_ant = ANT_AB,
484         .pll_cfg_val = 0,
485         .set_l0s = true,
486         .use_bsm = false,
487         .pa_type = IWL_PA_SYSTEM,
488         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
489         .shadow_ram_support = true,
490         .ht_greenfield_support = true,
491         .led_compensation = 51,
492         .use_rts_for_aggregation = true, /* use rts/cts protection */
493         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
494         .supports_idle = true,
495         .adv_thermal_throttle = true,
496         .support_ct_kill_exit = true,
497         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
498         .chain_noise_scale = 1000,
499         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
500         .max_event_log_size = 512,
501         .sensitivity_calib_by_driver = true,
502         .chain_noise_calib_by_driver = true,
503         .need_dc_calib = true,
504         .bt_statistics = true,
505 };
506
507 struct iwl_cfg iwl6000g2b_2abg_cfg = {
508         .name = "6000 Series 2x2 ABG Gen2b",
509         .fw_name_pre = IWL6000G2B_FW_PRE,
510         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
511         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
512         .sku = IWL_SKU_A|IWL_SKU_G,
513         .ops = &iwl6000g2b_ops,
514         .eeprom_size = OTP_LOW_IMAGE_SIZE,
515         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
516         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
517         .num_of_queues = IWLAGN_NUM_QUEUES,
518         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
519         .mod_params = &iwlagn_mod_params,
520         .valid_tx_ant = ANT_AB,
521         .valid_rx_ant = ANT_AB,
522         .pll_cfg_val = 0,
523         .set_l0s = true,
524         .use_bsm = false,
525         .pa_type = IWL_PA_SYSTEM,
526         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
527         .shadow_ram_support = true,
528         .led_compensation = 51,
529         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
530         .supports_idle = true,
531         .adv_thermal_throttle = true,
532         .support_ct_kill_exit = true,
533         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
534         .chain_noise_scale = 1000,
535         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
536         .max_event_log_size = 512,
537         .sensitivity_calib_by_driver = true,
538         .chain_noise_calib_by_driver = true,
539         .need_dc_calib = true,
540         .bt_statistics = true,
541 };
542
543 struct iwl_cfg iwl6000g2b_2bgn_cfg = {
544         .name = "6000 Series 2x2 BGN Gen2b",
545         .fw_name_pre = IWL6000G2B_FW_PRE,
546         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
547         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
548         .sku = IWL_SKU_G|IWL_SKU_N,
549         .ops = &iwl6000g2b_ops,
550         .eeprom_size = OTP_LOW_IMAGE_SIZE,
551         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
552         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
553         .num_of_queues = IWLAGN_NUM_QUEUES,
554         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
555         .mod_params = &iwlagn_mod_params,
556         .valid_tx_ant = ANT_AB,
557         .valid_rx_ant = ANT_AB,
558         .pll_cfg_val = 0,
559         .set_l0s = true,
560         .use_bsm = false,
561         .pa_type = IWL_PA_SYSTEM,
562         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
563         .shadow_ram_support = true,
564         .ht_greenfield_support = true,
565         .led_compensation = 51,
566         .use_rts_for_aggregation = true, /* use rts/cts protection */
567         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
568         .supports_idle = true,
569         .adv_thermal_throttle = true,
570         .support_ct_kill_exit = true,
571         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
572         .chain_noise_scale = 1000,
573         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
574         .max_event_log_size = 512,
575         .sensitivity_calib_by_driver = true,
576         .chain_noise_calib_by_driver = true,
577         .need_dc_calib = true,
578         .bt_statistics = true,
579 };
580
581 struct iwl_cfg iwl6000g2b_2bg_cfg = {
582         .name = "6000 Series 2x2 BG Gen2b",
583         .fw_name_pre = IWL6000G2B_FW_PRE,
584         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
585         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
586         .sku = IWL_SKU_G,
587         .ops = &iwl6000g2b_ops,
588         .eeprom_size = OTP_LOW_IMAGE_SIZE,
589         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
590         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
591         .num_of_queues = IWLAGN_NUM_QUEUES,
592         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
593         .mod_params = &iwlagn_mod_params,
594         .valid_tx_ant = ANT_AB,
595         .valid_rx_ant = ANT_AB,
596         .pll_cfg_val = 0,
597         .set_l0s = true,
598         .use_bsm = false,
599         .pa_type = IWL_PA_SYSTEM,
600         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
601         .shadow_ram_support = true,
602         .led_compensation = 51,
603         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
604         .supports_idle = true,
605         .adv_thermal_throttle = true,
606         .support_ct_kill_exit = true,
607         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
608         .chain_noise_scale = 1000,
609         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
610         .max_event_log_size = 512,
611         .sensitivity_calib_by_driver = true,
612         .chain_noise_calib_by_driver = true,
613         .need_dc_calib = true,
614         .bt_statistics = true,
615 };
616
617 struct iwl_cfg iwl6000g2b_bgn_cfg = {
618         .name = "6000 Series 1x2 BGN Gen2b",
619         .fw_name_pre = IWL6000G2B_FW_PRE,
620         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
621         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
622         .sku = IWL_SKU_G|IWL_SKU_N,
623         .ops = &iwl6000g2b_ops,
624         .eeprom_size = OTP_LOW_IMAGE_SIZE,
625         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
626         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
627         .num_of_queues = IWLAGN_NUM_QUEUES,
628         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
629         .mod_params = &iwlagn_mod_params,
630         .valid_tx_ant = ANT_A,
631         .valid_rx_ant = ANT_AB,
632         .pll_cfg_val = 0,
633         .set_l0s = true,
634         .use_bsm = false,
635         .pa_type = IWL_PA_SYSTEM,
636         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
637         .shadow_ram_support = true,
638         .ht_greenfield_support = true,
639         .led_compensation = 51,
640         .use_rts_for_aggregation = true, /* use rts/cts protection */
641         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
642         .supports_idle = true,
643         .adv_thermal_throttle = true,
644         .support_ct_kill_exit = true,
645         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
646         .chain_noise_scale = 1000,
647         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
648         .max_event_log_size = 512,
649         .sensitivity_calib_by_driver = true,
650         .chain_noise_calib_by_driver = true,
651         .need_dc_calib = true,
652         .bt_statistics = true,
653 };
654
655 struct iwl_cfg iwl6000g2b_bg_cfg = {
656         .name = "6000 Series 1x2 BG Gen2b",
657         .fw_name_pre = IWL6000G2B_FW_PRE,
658         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
659         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
660         .sku = IWL_SKU_G,
661         .ops = &iwl6000g2b_ops,
662         .eeprom_size = OTP_LOW_IMAGE_SIZE,
663         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
664         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
665         .num_of_queues = IWLAGN_NUM_QUEUES,
666         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
667         .mod_params = &iwlagn_mod_params,
668         .valid_tx_ant = ANT_A,
669         .valid_rx_ant = ANT_AB,
670         .pll_cfg_val = 0,
671         .set_l0s = true,
672         .use_bsm = false,
673         .pa_type = IWL_PA_SYSTEM,
674         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
675         .shadow_ram_support = true,
676         .led_compensation = 51,
677         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
678         .supports_idle = true,
679         .adv_thermal_throttle = true,
680         .support_ct_kill_exit = true,
681         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
682         .chain_noise_scale = 1000,
683         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
684         .max_event_log_size = 512,
685         .sensitivity_calib_by_driver = true,
686         .chain_noise_calib_by_driver = true,
687         .need_dc_calib = true,
688         .bt_statistics = true,
689 };
690
691 /*
692  * "i": Internal configuration, use internal Power Amplifier
693  */
694 struct iwl_cfg iwl6000i_2agn_cfg = {
695         .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
696         .fw_name_pre = IWL6000_FW_PRE,
697         .ucode_api_max = IWL6000_UCODE_API_MAX,
698         .ucode_api_min = IWL6000_UCODE_API_MIN,
699         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
700         .ops = &iwl6000_ops,
701         .eeprom_size = OTP_LOW_IMAGE_SIZE,
702         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
703         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
704         .num_of_queues = IWLAGN_NUM_QUEUES,
705         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
706         .mod_params = &iwlagn_mod_params,
707         .valid_tx_ant = ANT_BC,
708         .valid_rx_ant = ANT_BC,
709         .pll_cfg_val = 0,
710         .set_l0s = true,
711         .use_bsm = false,
712         .pa_type = IWL_PA_INTERNAL,
713         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
714         .shadow_ram_support = true,
715         .ht_greenfield_support = true,
716         .led_compensation = 51,
717         .use_rts_for_aggregation = true, /* use rts/cts protection */
718         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
719         .supports_idle = true,
720         .adv_thermal_throttle = true,
721         .support_ct_kill_exit = true,
722         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
723         .chain_noise_scale = 1000,
724         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
725         .max_event_log_size = 1024,
726         .ucode_tracing = true,
727         .sensitivity_calib_by_driver = true,
728         .chain_noise_calib_by_driver = true,
729 };
730
731 struct iwl_cfg iwl6000i_2abg_cfg = {
732         .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
733         .fw_name_pre = IWL6000_FW_PRE,
734         .ucode_api_max = IWL6000_UCODE_API_MAX,
735         .ucode_api_min = IWL6000_UCODE_API_MIN,
736         .sku = IWL_SKU_A|IWL_SKU_G,
737         .ops = &iwl6000_ops,
738         .eeprom_size = OTP_LOW_IMAGE_SIZE,
739         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
740         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
741         .num_of_queues = IWLAGN_NUM_QUEUES,
742         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
743         .mod_params = &iwlagn_mod_params,
744         .valid_tx_ant = ANT_BC,
745         .valid_rx_ant = ANT_BC,
746         .pll_cfg_val = 0,
747         .set_l0s = true,
748         .use_bsm = false,
749         .pa_type = IWL_PA_INTERNAL,
750         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
751         .shadow_ram_support = true,
752         .led_compensation = 51,
753         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
754         .supports_idle = true,
755         .adv_thermal_throttle = true,
756         .support_ct_kill_exit = true,
757         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
758         .chain_noise_scale = 1000,
759         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
760         .max_event_log_size = 1024,
761         .ucode_tracing = true,
762         .sensitivity_calib_by_driver = true,
763         .chain_noise_calib_by_driver = true,
764 };
765
766 struct iwl_cfg iwl6000i_2bg_cfg = {
767         .name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
768         .fw_name_pre = IWL6000_FW_PRE,
769         .ucode_api_max = IWL6000_UCODE_API_MAX,
770         .ucode_api_min = IWL6000_UCODE_API_MIN,
771         .sku = IWL_SKU_G,
772         .ops = &iwl6000_ops,
773         .eeprom_size = OTP_LOW_IMAGE_SIZE,
774         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
775         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
776         .num_of_queues = IWLAGN_NUM_QUEUES,
777         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
778         .mod_params = &iwlagn_mod_params,
779         .valid_tx_ant = ANT_BC,
780         .valid_rx_ant = ANT_BC,
781         .pll_cfg_val = 0,
782         .set_l0s = true,
783         .use_bsm = false,
784         .pa_type = IWL_PA_INTERNAL,
785         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
786         .shadow_ram_support = true,
787         .led_compensation = 51,
788         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
789         .supports_idle = true,
790         .adv_thermal_throttle = true,
791         .support_ct_kill_exit = true,
792         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
793         .chain_noise_scale = 1000,
794         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
795         .max_event_log_size = 1024,
796         .ucode_tracing = true,
797         .sensitivity_calib_by_driver = true,
798         .chain_noise_calib_by_driver = true,
799 };
800
801 struct iwl_cfg iwl6050_2agn_cfg = {
802         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
803         .fw_name_pre = IWL6050_FW_PRE,
804         .ucode_api_max = IWL6050_UCODE_API_MAX,
805         .ucode_api_min = IWL6050_UCODE_API_MIN,
806         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
807         .ops = &iwl6000_ops,
808         .eeprom_size = OTP_LOW_IMAGE_SIZE,
809         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
810         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
811         .num_of_queues = IWLAGN_NUM_QUEUES,
812         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
813         .mod_params = &iwlagn_mod_params,
814         .valid_tx_ant = ANT_AB,
815         .valid_rx_ant = ANT_AB,
816         .pll_cfg_val = 0,
817         .set_l0s = true,
818         .use_bsm = false,
819         .pa_type = IWL_PA_SYSTEM,
820         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
821         .shadow_ram_support = true,
822         .ht_greenfield_support = true,
823         .led_compensation = 51,
824         .use_rts_for_aggregation = true, /* use rts/cts protection */
825         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
826         .supports_idle = true,
827         .adv_thermal_throttle = true,
828         .support_ct_kill_exit = true,
829         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
830         .chain_noise_scale = 1500,
831         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
832         .max_event_log_size = 1024,
833         .ucode_tracing = true,
834         .sensitivity_calib_by_driver = true,
835         .chain_noise_calib_by_driver = true,
836         .need_dc_calib = true,
837 };
838
839 struct iwl_cfg iwl6050g2_bgn_cfg = {
840         .name = "6050 Series 1x2 BGN Gen2",
841         .fw_name_pre = IWL6050_FW_PRE,
842         .ucode_api_max = IWL6050_UCODE_API_MAX,
843         .ucode_api_min = IWL6050_UCODE_API_MIN,
844         .sku = IWL_SKU_G|IWL_SKU_N,
845         .ops = &iwl6000_ops,
846         .eeprom_size = OTP_LOW_IMAGE_SIZE,
847         .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
848         .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
849         .num_of_queues = IWLAGN_NUM_QUEUES,
850         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
851         .mod_params = &iwlagn_mod_params,
852         .valid_tx_ant = ANT_A,
853         .valid_rx_ant = ANT_AB,
854         .pll_cfg_val = 0,
855         .set_l0s = true,
856         .use_bsm = false,
857         .pa_type = IWL_PA_SYSTEM,
858         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
859         .shadow_ram_support = true,
860         .ht_greenfield_support = true,
861         .led_compensation = 51,
862         .use_rts_for_aggregation = true, /* use rts/cts protection */
863         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
864         .supports_idle = true,
865         .adv_thermal_throttle = true,
866         .support_ct_kill_exit = true,
867         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
868         .chain_noise_scale = 1500,
869         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
870         .max_event_log_size = 1024,
871         .ucode_tracing = true,
872         .sensitivity_calib_by_driver = true,
873         .chain_noise_calib_by_driver = true,
874         .need_dc_calib = true,
875 };
876
877 struct iwl_cfg iwl6050_2abg_cfg = {
878         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
879         .fw_name_pre = IWL6050_FW_PRE,
880         .ucode_api_max = IWL6050_UCODE_API_MAX,
881         .ucode_api_min = IWL6050_UCODE_API_MIN,
882         .sku = IWL_SKU_A|IWL_SKU_G,
883         .ops = &iwl6000_ops,
884         .eeprom_size = OTP_LOW_IMAGE_SIZE,
885         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
886         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
887         .num_of_queues = IWLAGN_NUM_QUEUES,
888         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
889         .mod_params = &iwlagn_mod_params,
890         .valid_tx_ant = ANT_AB,
891         .valid_rx_ant = ANT_AB,
892         .pll_cfg_val = 0,
893         .set_l0s = true,
894         .use_bsm = false,
895         .pa_type = IWL_PA_SYSTEM,
896         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
897         .shadow_ram_support = true,
898         .led_compensation = 51,
899         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
900         .supports_idle = true,
901         .adv_thermal_throttle = true,
902         .support_ct_kill_exit = true,
903         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
904         .chain_noise_scale = 1500,
905         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
906         .max_event_log_size = 1024,
907         .ucode_tracing = true,
908         .sensitivity_calib_by_driver = true,
909         .chain_noise_calib_by_driver = true,
910         .need_dc_calib = true,
911 };
912
913 struct iwl_cfg iwl6000_3agn_cfg = {
914         .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
915         .fw_name_pre = IWL6000_FW_PRE,
916         .ucode_api_max = IWL6000_UCODE_API_MAX,
917         .ucode_api_min = IWL6000_UCODE_API_MIN,
918         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
919         .ops = &iwl6000_ops,
920         .eeprom_size = OTP_LOW_IMAGE_SIZE,
921         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
922         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
923         .num_of_queues = IWLAGN_NUM_QUEUES,
924         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
925         .mod_params = &iwlagn_mod_params,
926         .valid_tx_ant = ANT_ABC,
927         .valid_rx_ant = ANT_ABC,
928         .pll_cfg_val = 0,
929         .set_l0s = true,
930         .use_bsm = false,
931         .pa_type = IWL_PA_SYSTEM,
932         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
933         .shadow_ram_support = true,
934         .ht_greenfield_support = true,
935         .led_compensation = 51,
936         .use_rts_for_aggregation = true, /* use rts/cts protection */
937         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
938         .supports_idle = true,
939         .adv_thermal_throttle = true,
940         .support_ct_kill_exit = true,
941         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
942         .chain_noise_scale = 1000,
943         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
944         .max_event_log_size = 1024,
945         .ucode_tracing = true,
946         .sensitivity_calib_by_driver = true,
947         .chain_noise_calib_by_driver = true,
948 };
949
950 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
951 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
952 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
953 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));