iwlwifi: remove useless goto
[linux-2.6.git] / drivers / net / wireless / iwlwifi / iwl-4965.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
39
40 #include "iwl-eeprom.h"
41 #include "iwl-dev.h"
42 #include "iwl-core.h"
43 #include "iwl-io.h"
44 #include "iwl-helpers.h"
45 #include "iwl-calib.h"
46 #include "iwl-sta.h"
47
48 static int iwl4965_send_tx_power(struct iwl_priv *priv);
49 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
50
51 /* Highest firmware API version supported */
52 #define IWL4965_UCODE_API_MAX 2
53
54 /* Lowest firmware API version supported */
55 #define IWL4965_UCODE_API_MIN 2
56
57 #define IWL4965_FW_PRE "iwlwifi-4965-"
58 #define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
59 #define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
60
61
62 /* module parameters */
63 static struct iwl_mod_params iwl4965_mod_params = {
64         .num_of_queues = IWL49_NUM_QUEUES,
65         .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
66         .amsdu_size_8K = 1,
67         .restart_fw = 1,
68         /* the rest are 0 by default */
69 };
70
71 /* check contents of special bootstrap uCode SRAM */
72 static int iwl4965_verify_bsm(struct iwl_priv *priv)
73 {
74         __le32 *image = priv->ucode_boot.v_addr;
75         u32 len = priv->ucode_boot.len;
76         u32 reg;
77         u32 val;
78
79         IWL_DEBUG_INFO("Begin verify bsm\n");
80
81         /* verify BSM SRAM contents */
82         val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
83         for (reg = BSM_SRAM_LOWER_BOUND;
84              reg < BSM_SRAM_LOWER_BOUND + len;
85              reg += sizeof(u32), image++) {
86                 val = iwl_read_prph(priv, reg);
87                 if (val != le32_to_cpu(*image)) {
88                         IWL_ERROR("BSM uCode verification failed at "
89                                   "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
90                                   BSM_SRAM_LOWER_BOUND,
91                                   reg - BSM_SRAM_LOWER_BOUND, len,
92                                   val, le32_to_cpu(*image));
93                         return -EIO;
94                 }
95         }
96
97         IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
98
99         return 0;
100 }
101
102 /**
103  * iwl4965_load_bsm - Load bootstrap instructions
104  *
105  * BSM operation:
106  *
107  * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
108  * in special SRAM that does not power down during RFKILL.  When powering back
109  * up after power-saving sleeps (or during initial uCode load), the BSM loads
110  * the bootstrap program into the on-board processor, and starts it.
111  *
112  * The bootstrap program loads (via DMA) instructions and data for a new
113  * program from host DRAM locations indicated by the host driver in the
114  * BSM_DRAM_* registers.  Once the new program is loaded, it starts
115  * automatically.
116  *
117  * When initializing the NIC, the host driver points the BSM to the
118  * "initialize" uCode image.  This uCode sets up some internal data, then
119  * notifies host via "initialize alive" that it is complete.
120  *
121  * The host then replaces the BSM_DRAM_* pointer values to point to the
122  * normal runtime uCode instructions and a backup uCode data cache buffer
123  * (filled initially with starting data values for the on-board processor),
124  * then triggers the "initialize" uCode to load and launch the runtime uCode,
125  * which begins normal operation.
126  *
127  * When doing a power-save shutdown, runtime uCode saves data SRAM into
128  * the backup data cache in DRAM before SRAM is powered down.
129  *
130  * When powering back up, the BSM loads the bootstrap program.  This reloads
131  * the runtime uCode instructions and the backup data cache into SRAM,
132  * and re-launches the runtime uCode from where it left off.
133  */
134 static int iwl4965_load_bsm(struct iwl_priv *priv)
135 {
136         __le32 *image = priv->ucode_boot.v_addr;
137         u32 len = priv->ucode_boot.len;
138         dma_addr_t pinst;
139         dma_addr_t pdata;
140         u32 inst_len;
141         u32 data_len;
142         int i;
143         u32 done;
144         u32 reg_offset;
145         int ret;
146
147         IWL_DEBUG_INFO("Begin load bsm\n");
148
149         priv->ucode_type = UCODE_RT;
150
151         /* make sure bootstrap program is no larger than BSM's SRAM size */
152         if (len > IWL_MAX_BSM_SIZE)
153                 return -EINVAL;
154
155         /* Tell bootstrap uCode where to find the "Initialize" uCode
156          *   in host DRAM ... host DRAM physical address bits 35:4 for 4965.
157          * NOTE:  iwl_init_alive_start() will replace these values,
158          *        after the "initialize" uCode has run, to point to
159          *        runtime/protocol instructions and backup data cache.
160          */
161         pinst = priv->ucode_init.p_addr >> 4;
162         pdata = priv->ucode_init_data.p_addr >> 4;
163         inst_len = priv->ucode_init.len;
164         data_len = priv->ucode_init_data.len;
165
166         ret = iwl_grab_nic_access(priv);
167         if (ret)
168                 return ret;
169
170         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
171         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
172         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
173         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
174
175         /* Fill BSM memory with bootstrap instructions */
176         for (reg_offset = BSM_SRAM_LOWER_BOUND;
177              reg_offset < BSM_SRAM_LOWER_BOUND + len;
178              reg_offset += sizeof(u32), image++)
179                 _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
180
181         ret = iwl4965_verify_bsm(priv);
182         if (ret) {
183                 iwl_release_nic_access(priv);
184                 return ret;
185         }
186
187         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
188         iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
189         iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND);
190         iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
191
192         /* Load bootstrap code into instruction SRAM now,
193          *   to prepare to load "initialize" uCode */
194         iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
195
196         /* Wait for load of bootstrap uCode to finish */
197         for (i = 0; i < 100; i++) {
198                 done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
199                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
200                         break;
201                 udelay(10);
202         }
203         if (i < 100)
204                 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
205         else {
206                 IWL_ERROR("BSM write did not complete!\n");
207                 return -EIO;
208         }
209
210         /* Enable future boot loads whenever power management unit triggers it
211          *   (e.g. when powering back up after power-save shutdown) */
212         iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
213
214         iwl_release_nic_access(priv);
215
216         return 0;
217 }
218
219 /**
220  * iwl4965_set_ucode_ptrs - Set uCode address location
221  *
222  * Tell initialization uCode where to find runtime uCode.
223  *
224  * BSM registers initially contain pointers to initialization uCode.
225  * We need to replace them to load runtime uCode inst and data,
226  * and to save runtime data when powering down.
227  */
228 static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
229 {
230         dma_addr_t pinst;
231         dma_addr_t pdata;
232         unsigned long flags;
233         int ret = 0;
234
235         /* bits 35:4 for 4965 */
236         pinst = priv->ucode_code.p_addr >> 4;
237         pdata = priv->ucode_data_backup.p_addr >> 4;
238
239         spin_lock_irqsave(&priv->lock, flags);
240         ret = iwl_grab_nic_access(priv);
241         if (ret) {
242                 spin_unlock_irqrestore(&priv->lock, flags);
243                 return ret;
244         }
245
246         /* Tell bootstrap uCode where to find image to load */
247         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
248         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
249         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
250                                  priv->ucode_data.len);
251
252         /* Inst byte count must be last to set up, bit 31 signals uCode
253          *   that all new ptr/size info is in place */
254         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
255                                  priv->ucode_code.len | BSM_DRAM_INST_LOAD);
256         iwl_release_nic_access(priv);
257
258         spin_unlock_irqrestore(&priv->lock, flags);
259
260         IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
261
262         return ret;
263 }
264
265 /**
266  * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
267  *
268  * Called after REPLY_ALIVE notification received from "initialize" uCode.
269  *
270  * The 4965 "initialize" ALIVE reply contains calibration data for:
271  *   Voltage, temperature, and MIMO tx gain correction, now stored in priv
272  *   (3945 does not contain this data).
273  *
274  * Tell "initialize" uCode to go ahead and load the runtime uCode.
275 */
276 static void iwl4965_init_alive_start(struct iwl_priv *priv)
277 {
278         /* Check alive response for "valid" sign from uCode */
279         if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
280                 /* We had an error bringing up the hardware, so take it
281                  * all the way back down so we can try again */
282                 IWL_DEBUG_INFO("Initialize Alive failed.\n");
283                 goto restart;
284         }
285
286         /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
287          * This is a paranoid check, because we would not have gotten the
288          * "initialize" alive if code weren't properly loaded.  */
289         if (iwl_verify_ucode(priv)) {
290                 /* Runtime instruction load was bad;
291                  * take it all the way back down so we can try again */
292                 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
293                 goto restart;
294         }
295
296         /* Calculate temperature */
297         priv->temperature = iwl4965_hw_get_temperature(priv);
298
299         /* Send pointers to protocol/runtime uCode image ... init code will
300          * load and launch runtime uCode, which will send us another "Alive"
301          * notification. */
302         IWL_DEBUG_INFO("Initialization Alive received.\n");
303         if (iwl4965_set_ucode_ptrs(priv)) {
304                 /* Runtime instruction load won't happen;
305                  * take it all the way back down so we can try again */
306                 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
307                 goto restart;
308         }
309         return;
310
311 restart:
312         queue_work(priv->workqueue, &priv->restart);
313 }
314
315 static int is_fat_channel(__le32 rxon_flags)
316 {
317         return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
318                 (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
319 }
320
321 /*
322  * EEPROM handlers
323  */
324 static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
325 {
326         return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
327 }
328
329 /*
330  * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
331  * must be called under priv->lock and mac access
332  */
333 static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
334 {
335         iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
336 }
337
338 static int iwl4965_apm_init(struct iwl_priv *priv)
339 {
340         int ret = 0;
341
342         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
343                           CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
344
345         /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
346         iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
347                           CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
348
349         /* set "initialization complete" bit to move adapter
350          * D0U* --> D0A* state */
351         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
352
353         /* wait for clock stabilization */
354         ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
355                         CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
356         if (ret < 0) {
357                 IWL_DEBUG_INFO("Failed to init the card\n");
358                 goto out;
359         }
360
361         ret = iwl_grab_nic_access(priv);
362         if (ret)
363                 goto out;
364
365         /* enable DMA */
366         iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
367                                                 APMG_CLK_VAL_BSM_CLK_RQT);
368
369         udelay(20);
370
371         /* disable L1-Active */
372         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
373                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
374
375         iwl_release_nic_access(priv);
376 out:
377         return ret;
378 }
379
380
381 static void iwl4965_nic_config(struct iwl_priv *priv)
382 {
383         unsigned long flags;
384         u32 val;
385         u16 radio_cfg;
386         u16 link;
387
388         spin_lock_irqsave(&priv->lock, flags);
389
390         if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) {
391                 pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val);
392                 /* Enable No Snoop field */
393                 pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8,
394                                        val & ~(1 << 11));
395         }
396
397         pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link);
398
399         /* L1 is enabled by BIOS */
400         if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
401                 /* disable L0S disabled L1A enabled */
402                 iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
403         else
404                 /* L0S enabled L1A disabled */
405                 iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
406
407         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
408
409         /* write radio config values to register */
410         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
411                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
412                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
413                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
414                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
415
416         /* set CSR_HW_CONFIG_REG for uCode use */
417         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
418                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
419                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
420
421         priv->calib_info = (struct iwl_eeprom_calib_info *)
422                 iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
423
424         spin_unlock_irqrestore(&priv->lock, flags);
425 }
426
427 static int iwl4965_apm_stop_master(struct iwl_priv *priv)
428 {
429         unsigned long flags;
430
431         spin_lock_irqsave(&priv->lock, flags);
432
433         /* set stop master bit */
434         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
435
436         iwl_poll_direct_bit(priv, CSR_RESET,
437                         CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
438
439         spin_unlock_irqrestore(&priv->lock, flags);
440         IWL_DEBUG_INFO("stop master\n");
441
442         return 0;
443 }
444
445 static void iwl4965_apm_stop(struct iwl_priv *priv)
446 {
447         unsigned long flags;
448
449         iwl4965_apm_stop_master(priv);
450
451         spin_lock_irqsave(&priv->lock, flags);
452
453         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
454
455         udelay(10);
456         /* clear "init complete"  move adapter D0A* --> D0U state */
457         iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
458         spin_unlock_irqrestore(&priv->lock, flags);
459 }
460
461 static int iwl4965_apm_reset(struct iwl_priv *priv)
462 {
463         int ret = 0;
464         unsigned long flags;
465
466         iwl4965_apm_stop_master(priv);
467
468         spin_lock_irqsave(&priv->lock, flags);
469
470         iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
471
472         udelay(10);
473
474         /* FIXME: put here L1A -L0S w/a */
475
476         iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
477
478         ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
479                         CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
480         if (ret < 0)
481                 goto out;
482
483         udelay(10);
484
485         ret = iwl_grab_nic_access(priv);
486         if (ret)
487                 goto out;
488         /* Enable DMA and BSM Clock */
489         iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
490                                               APMG_CLK_VAL_BSM_CLK_RQT);
491
492         udelay(10);
493
494         /* disable L1A */
495         iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
496                           APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
497
498         iwl_release_nic_access(priv);
499
500         clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
501         wake_up_interruptible(&priv->wait_command_queue);
502
503 out:
504         spin_unlock_irqrestore(&priv->lock, flags);
505
506         return ret;
507 }
508
509 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
510  * Called after every association, but this runs only once!
511  *  ... once chain noise is calibrated the first time, it's good forever.  */
512 static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
513 {
514         struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
515
516         if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
517                 struct iwl_calib_diff_gain_cmd cmd;
518
519                 memset(&cmd, 0, sizeof(cmd));
520                 cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
521                 cmd.diff_gain_a = 0;
522                 cmd.diff_gain_b = 0;
523                 cmd.diff_gain_c = 0;
524                 if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
525                                  sizeof(cmd), &cmd))
526                         IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
527                 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
528                 IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
529         }
530 }
531
532 static void iwl4965_gain_computation(struct iwl_priv *priv,
533                 u32 *average_noise,
534                 u16 min_average_noise_antenna_i,
535                 u32 min_average_noise)
536 {
537         int i, ret;
538         struct iwl_chain_noise_data *data = &priv->chain_noise_data;
539
540         data->delta_gain_code[min_average_noise_antenna_i] = 0;
541
542         for (i = 0; i < NUM_RX_CHAINS; i++) {
543                 s32 delta_g = 0;
544
545                 if (!(data->disconn_array[i]) &&
546                     (data->delta_gain_code[i] ==
547                              CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
548                         delta_g = average_noise[i] - min_average_noise;
549                         data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
550                         data->delta_gain_code[i] =
551                                 min(data->delta_gain_code[i],
552                                 (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
553
554                         data->delta_gain_code[i] =
555                                 (data->delta_gain_code[i] | (1 << 2));
556                 } else {
557                         data->delta_gain_code[i] = 0;
558                 }
559         }
560         IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
561                      data->delta_gain_code[0],
562                      data->delta_gain_code[1],
563                      data->delta_gain_code[2]);
564
565         /* Differential gain gets sent to uCode only once */
566         if (!data->radio_write) {
567                 struct iwl_calib_diff_gain_cmd cmd;
568                 data->radio_write = 1;
569
570                 memset(&cmd, 0, sizeof(cmd));
571                 cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
572                 cmd.diff_gain_a = data->delta_gain_code[0];
573                 cmd.diff_gain_b = data->delta_gain_code[1];
574                 cmd.diff_gain_c = data->delta_gain_code[2];
575                 ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
576                                       sizeof(cmd), &cmd);
577                 if (ret)
578                         IWL_DEBUG_CALIB("fail sending cmd "
579                                      "REPLY_PHY_CALIBRATION_CMD \n");
580
581                 /* TODO we might want recalculate
582                  * rx_chain in rxon cmd */
583
584                 /* Mark so we run this algo only once! */
585                 data->state = IWL_CHAIN_NOISE_CALIBRATED;
586         }
587         data->chain_noise_a = 0;
588         data->chain_noise_b = 0;
589         data->chain_noise_c = 0;
590         data->chain_signal_a = 0;
591         data->chain_signal_b = 0;
592         data->chain_signal_c = 0;
593         data->beacon_count = 0;
594 }
595
596 static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
597                         __le32 *tx_flags)
598 {
599         if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
600                 *tx_flags |= TX_CMD_FLG_RTS_MSK;
601                 *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
602         } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
603                 *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
604                 *tx_flags |= TX_CMD_FLG_CTS_MSK;
605         }
606 }
607
608 static void iwl4965_bg_txpower_work(struct work_struct *work)
609 {
610         struct iwl_priv *priv = container_of(work, struct iwl_priv,
611                         txpower_work);
612
613         /* If a scan happened to start before we got here
614          * then just return; the statistics notification will
615          * kick off another scheduled work to compensate for
616          * any temperature delta we missed here. */
617         if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
618             test_bit(STATUS_SCANNING, &priv->status))
619                 return;
620
621         mutex_lock(&priv->mutex);
622
623         /* Regardless of if we are associated, we must reconfigure the
624          * TX power since frames can be sent on non-radar channels while
625          * not associated */
626         iwl4965_send_tx_power(priv);
627
628         /* Update last_temperature to keep is_calib_needed from running
629          * when it isn't needed... */
630         priv->last_temperature = priv->temperature;
631
632         mutex_unlock(&priv->mutex);
633 }
634
635 /*
636  * Acquire priv->lock before calling this function !
637  */
638 static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
639 {
640         iwl_write_direct32(priv, HBUS_TARG_WRPTR,
641                              (index & 0xff) | (txq_id << 8));
642         iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
643 }
644
645 /**
646  * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
647  * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
648  * @scd_retry: (1) Indicates queue will be used in aggregation mode
649  *
650  * NOTE:  Acquire priv->lock before calling this function !
651  */
652 static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
653                                         struct iwl_tx_queue *txq,
654                                         int tx_fifo_id, int scd_retry)
655 {
656         int txq_id = txq->q.id;
657
658         /* Find out whether to activate Tx queue */
659         int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
660
661         /* Set up and activate */
662         iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
663                          (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
664                          (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
665                          (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
666                          (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
667                          IWL49_SCD_QUEUE_STTS_REG_MSK);
668
669         txq->sched_retry = scd_retry;
670
671         IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
672                        active ? "Activate" : "Deactivate",
673                        scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
674 }
675
676 static const u16 default_queue_to_tx_fifo[] = {
677         IWL_TX_FIFO_AC3,
678         IWL_TX_FIFO_AC2,
679         IWL_TX_FIFO_AC1,
680         IWL_TX_FIFO_AC0,
681         IWL49_CMD_FIFO_NUM,
682         IWL_TX_FIFO_HCCA_1,
683         IWL_TX_FIFO_HCCA_2
684 };
685
686 static int iwl4965_alive_notify(struct iwl_priv *priv)
687 {
688         u32 a;
689         unsigned long flags;
690         int ret;
691         int i, chan;
692         u32 reg_val;
693
694         spin_lock_irqsave(&priv->lock, flags);
695
696         ret = iwl_grab_nic_access(priv);
697         if (ret) {
698                 spin_unlock_irqrestore(&priv->lock, flags);
699                 return ret;
700         }
701
702         /* Clear 4965's internal Tx Scheduler data base */
703         priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
704         a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
705         for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
706                 iwl_write_targ_mem(priv, a, 0);
707         for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
708                 iwl_write_targ_mem(priv, a, 0);
709         for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
710                 iwl_write_targ_mem(priv, a, 0);
711
712         /* Tel 4965 where to find Tx byte count tables */
713         iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
714                         priv->scd_bc_tbls.dma >> 10);
715
716         /* Enable DMA channel */
717         for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
718                 iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
719                                 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
720                                 FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
721
722         /* Update FH chicken bits */
723         reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
724         iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
725                            reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
726
727         /* Disable chain mode for all queues */
728         iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
729
730         /* Initialize each Tx queue (including the command queue) */
731         for (i = 0; i < priv->hw_params.max_txq_num; i++) {
732
733                 /* TFD circular buffer read/write indexes */
734                 iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
735                 iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
736
737                 /* Max Tx Window size for Scheduler-ACK mode */
738                 iwl_write_targ_mem(priv, priv->scd_base_addr +
739                                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
740                                 (SCD_WIN_SIZE <<
741                                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
742                                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
743
744                 /* Frame limit */
745                 iwl_write_targ_mem(priv, priv->scd_base_addr +
746                                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
747                                 sizeof(u32),
748                                 (SCD_FRAME_LIMIT <<
749                                 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
750                                 IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
751
752         }
753         iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
754                                  (1 << priv->hw_params.max_txq_num) - 1);
755
756         /* Activate all Tx DMA/FIFO channels */
757         priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6));
758
759         iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
760
761         /* Map each Tx/cmd queue to its corresponding fifo */
762         for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
763                 int ac = default_queue_to_tx_fifo[i];
764                 iwl_txq_ctx_activate(priv, i);
765                 iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
766         }
767
768         iwl_release_nic_access(priv);
769         spin_unlock_irqrestore(&priv->lock, flags);
770
771         return ret;
772 }
773
774 static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
775         .min_nrg_cck = 97,
776         .max_nrg_cck = 0,
777
778         .auto_corr_min_ofdm = 85,
779         .auto_corr_min_ofdm_mrc = 170,
780         .auto_corr_min_ofdm_x1 = 105,
781         .auto_corr_min_ofdm_mrc_x1 = 220,
782
783         .auto_corr_max_ofdm = 120,
784         .auto_corr_max_ofdm_mrc = 210,
785         .auto_corr_max_ofdm_x1 = 140,
786         .auto_corr_max_ofdm_mrc_x1 = 270,
787
788         .auto_corr_min_cck = 125,
789         .auto_corr_max_cck = 200,
790         .auto_corr_min_cck_mrc = 200,
791         .auto_corr_max_cck_mrc = 400,
792
793         .nrg_th_cck = 100,
794         .nrg_th_ofdm = 100,
795 };
796
797 /**
798  * iwl4965_hw_set_hw_params
799  *
800  * Called when initializing driver
801  */
802 static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
803 {
804
805         if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
806             (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
807                 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
808                           IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
809                 return -EINVAL;
810         }
811
812         priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
813         priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
814         priv->hw_params.scd_bc_tbls_size =
815                         IWL49_NUM_QUEUES * sizeof(struct iwl4965_scd_bc_tbl);
816         priv->hw_params.max_stations = IWL4965_STATION_COUNT;
817         priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
818         priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
819         priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
820         priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
821         priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
822
823         priv->hw_params.tx_chains_num = 2;
824         priv->hw_params.rx_chains_num = 2;
825         priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
826         priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
827         priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
828
829         priv->hw_params.sens = &iwl4965_sensitivity;
830
831         return 0;
832 }
833
834 static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
835 {
836         s32 sign = 1;
837
838         if (num < 0) {
839                 sign = -sign;
840                 num = -num;
841         }
842         if (denom < 0) {
843                 sign = -sign;
844                 denom = -denom;
845         }
846         *res = 1;
847         *res = ((num * 2 + denom) / (denom * 2)) * sign;
848
849         return 1;
850 }
851
852 /**
853  * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
854  *
855  * Determines power supply voltage compensation for txpower calculations.
856  * Returns number of 1/2-dB steps to subtract from gain table index,
857  * to compensate for difference between power supply voltage during
858  * factory measurements, vs. current power supply voltage.
859  *
860  * Voltage indication is higher for lower voltage.
861  * Lower voltage requires more gain (lower gain table index).
862  */
863 static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
864                                             s32 current_voltage)
865 {
866         s32 comp = 0;
867
868         if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
869             (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
870                 return 0;
871
872         iwl4965_math_div_round(current_voltage - eeprom_voltage,
873                                TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
874
875         if (current_voltage > eeprom_voltage)
876                 comp *= 2;
877         if ((comp < -2) || (comp > 2))
878                 comp = 0;
879
880         return comp;
881 }
882
883 static s32 iwl4965_get_tx_atten_grp(u16 channel)
884 {
885         if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
886             channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
887                 return CALIB_CH_GROUP_5;
888
889         if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
890             channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
891                 return CALIB_CH_GROUP_1;
892
893         if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
894             channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
895                 return CALIB_CH_GROUP_2;
896
897         if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
898             channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
899                 return CALIB_CH_GROUP_3;
900
901         if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
902             channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
903                 return CALIB_CH_GROUP_4;
904
905         IWL_ERROR("Can't find txatten group for channel %d.\n", channel);
906         return -1;
907 }
908
909 static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
910 {
911         s32 b = -1;
912
913         for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
914                 if (priv->calib_info->band_info[b].ch_from == 0)
915                         continue;
916
917                 if ((channel >= priv->calib_info->band_info[b].ch_from)
918                     && (channel <= priv->calib_info->band_info[b].ch_to))
919                         break;
920         }
921
922         return b;
923 }
924
925 static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
926 {
927         s32 val;
928
929         if (x2 == x1)
930                 return y1;
931         else {
932                 iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
933                 return val + y2;
934         }
935 }
936
937 /**
938  * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
939  *
940  * Interpolates factory measurements from the two sample channels within a
941  * sub-band, to apply to channel of interest.  Interpolation is proportional to
942  * differences in channel frequencies, which is proportional to differences
943  * in channel number.
944  */
945 static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
946                                     struct iwl_eeprom_calib_ch_info *chan_info)
947 {
948         s32 s = -1;
949         u32 c;
950         u32 m;
951         const struct iwl_eeprom_calib_measure *m1;
952         const struct iwl_eeprom_calib_measure *m2;
953         struct iwl_eeprom_calib_measure *omeas;
954         u32 ch_i1;
955         u32 ch_i2;
956
957         s = iwl4965_get_sub_band(priv, channel);
958         if (s >= EEPROM_TX_POWER_BANDS) {
959                 IWL_ERROR("Tx Power can not find channel %d\n", channel);
960                 return -1;
961         }
962
963         ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
964         ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
965         chan_info->ch_num = (u8) channel;
966
967         IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
968                           channel, s, ch_i1, ch_i2);
969
970         for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
971                 for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
972                         m1 = &(priv->calib_info->band_info[s].ch1.
973                                measurements[c][m]);
974                         m2 = &(priv->calib_info->band_info[s].ch2.
975                                measurements[c][m]);
976                         omeas = &(chan_info->measurements[c][m]);
977
978                         omeas->actual_pow =
979                             (u8) iwl4965_interpolate_value(channel, ch_i1,
980                                                            m1->actual_pow,
981                                                            ch_i2,
982                                                            m2->actual_pow);
983                         omeas->gain_idx =
984                             (u8) iwl4965_interpolate_value(channel, ch_i1,
985                                                            m1->gain_idx, ch_i2,
986                                                            m2->gain_idx);
987                         omeas->temperature =
988                             (u8) iwl4965_interpolate_value(channel, ch_i1,
989                                                            m1->temperature,
990                                                            ch_i2,
991                                                            m2->temperature);
992                         omeas->pa_det =
993                             (s8) iwl4965_interpolate_value(channel, ch_i1,
994                                                            m1->pa_det, ch_i2,
995                                                            m2->pa_det);
996
997                         IWL_DEBUG_TXPOWER
998                             ("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
999                              m1->actual_pow, m2->actual_pow, omeas->actual_pow);
1000                         IWL_DEBUG_TXPOWER
1001                             ("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
1002                              m1->gain_idx, m2->gain_idx, omeas->gain_idx);
1003                         IWL_DEBUG_TXPOWER
1004                             ("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
1005                              m1->pa_det, m2->pa_det, omeas->pa_det);
1006                         IWL_DEBUG_TXPOWER
1007                             ("chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m,
1008                              m1->temperature, m2->temperature,
1009                              omeas->temperature);
1010                 }
1011         }
1012
1013         return 0;
1014 }
1015
1016 /* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
1017  * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
1018 static s32 back_off_table[] = {
1019         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
1020         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
1021         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
1022         10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
1023         10                      /* CCK */
1024 };
1025
1026 /* Thermal compensation values for txpower for various frequency ranges ...
1027  *   ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
1028 static struct iwl4965_txpower_comp_entry {
1029         s32 degrees_per_05db_a;
1030         s32 degrees_per_05db_a_denom;
1031 } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
1032         {9, 2},                 /* group 0 5.2, ch  34-43 */
1033         {4, 1},                 /* group 1 5.2, ch  44-70 */
1034         {4, 1},                 /* group 2 5.2, ch  71-124 */
1035         {4, 1},                 /* group 3 5.2, ch 125-200 */
1036         {3, 1}                  /* group 4 2.4, ch   all */
1037 };
1038
1039 static s32 get_min_power_index(s32 rate_power_index, u32 band)
1040 {
1041         if (!band) {
1042                 if ((rate_power_index & 7) <= 4)
1043                         return MIN_TX_GAIN_INDEX_52GHZ_EXT;
1044         }
1045         return MIN_TX_GAIN_INDEX;
1046 }
1047
1048 struct gain_entry {
1049         u8 dsp;
1050         u8 radio;
1051 };
1052
1053 static const struct gain_entry gain_table[2][108] = {
1054         /* 5.2GHz power gain index table */
1055         {
1056          {123, 0x3F},           /* highest txpower */
1057          {117, 0x3F},
1058          {110, 0x3F},
1059          {104, 0x3F},
1060          {98, 0x3F},
1061          {110, 0x3E},
1062          {104, 0x3E},
1063          {98, 0x3E},
1064          {110, 0x3D},
1065          {104, 0x3D},
1066          {98, 0x3D},
1067          {110, 0x3C},
1068          {104, 0x3C},
1069          {98, 0x3C},
1070          {110, 0x3B},
1071          {104, 0x3B},
1072          {98, 0x3B},
1073          {110, 0x3A},
1074          {104, 0x3A},
1075          {98, 0x3A},
1076          {110, 0x39},
1077          {104, 0x39},
1078          {98, 0x39},
1079          {110, 0x38},
1080          {104, 0x38},
1081          {98, 0x38},
1082          {110, 0x37},
1083          {104, 0x37},
1084          {98, 0x37},
1085          {110, 0x36},
1086          {104, 0x36},
1087          {98, 0x36},
1088          {110, 0x35},
1089          {104, 0x35},
1090          {98, 0x35},
1091          {110, 0x34},
1092          {104, 0x34},
1093          {98, 0x34},
1094          {110, 0x33},
1095          {104, 0x33},
1096          {98, 0x33},
1097          {110, 0x32},
1098          {104, 0x32},
1099          {98, 0x32},
1100          {110, 0x31},
1101          {104, 0x31},
1102          {98, 0x31},
1103          {110, 0x30},
1104          {104, 0x30},
1105          {98, 0x30},
1106          {110, 0x25},
1107          {104, 0x25},
1108          {98, 0x25},
1109          {110, 0x24},
1110          {104, 0x24},
1111          {98, 0x24},
1112          {110, 0x23},
1113          {104, 0x23},
1114          {98, 0x23},
1115          {110, 0x22},
1116          {104, 0x18},
1117          {98, 0x18},
1118          {110, 0x17},
1119          {104, 0x17},
1120          {98, 0x17},
1121          {110, 0x16},
1122          {104, 0x16},
1123          {98, 0x16},
1124          {110, 0x15},
1125          {104, 0x15},
1126          {98, 0x15},
1127          {110, 0x14},
1128          {104, 0x14},
1129          {98, 0x14},
1130          {110, 0x13},
1131          {104, 0x13},
1132          {98, 0x13},
1133          {110, 0x12},
1134          {104, 0x08},
1135          {98, 0x08},
1136          {110, 0x07},
1137          {104, 0x07},
1138          {98, 0x07},
1139          {110, 0x06},
1140          {104, 0x06},
1141          {98, 0x06},
1142          {110, 0x05},
1143          {104, 0x05},
1144          {98, 0x05},
1145          {110, 0x04},
1146          {104, 0x04},
1147          {98, 0x04},
1148          {110, 0x03},
1149          {104, 0x03},
1150          {98, 0x03},
1151          {110, 0x02},
1152          {104, 0x02},
1153          {98, 0x02},
1154          {110, 0x01},
1155          {104, 0x01},
1156          {98, 0x01},
1157          {110, 0x00},
1158          {104, 0x00},
1159          {98, 0x00},
1160          {93, 0x00},
1161          {88, 0x00},
1162          {83, 0x00},
1163          {78, 0x00},
1164          },
1165         /* 2.4GHz power gain index table */
1166         {
1167          {110, 0x3f},           /* highest txpower */
1168          {104, 0x3f},
1169          {98, 0x3f},
1170          {110, 0x3e},
1171          {104, 0x3e},
1172          {98, 0x3e},
1173          {110, 0x3d},
1174          {104, 0x3d},
1175          {98, 0x3d},
1176          {110, 0x3c},
1177          {104, 0x3c},
1178          {98, 0x3c},
1179          {110, 0x3b},
1180          {104, 0x3b},
1181          {98, 0x3b},
1182          {110, 0x3a},
1183          {104, 0x3a},
1184          {98, 0x3a},
1185          {110, 0x39},
1186          {104, 0x39},
1187          {98, 0x39},
1188          {110, 0x38},
1189          {104, 0x38},
1190          {98, 0x38},
1191          {110, 0x37},
1192          {104, 0x37},
1193          {98, 0x37},
1194          {110, 0x36},
1195          {104, 0x36},
1196          {98, 0x36},
1197          {110, 0x35},
1198          {104, 0x35},
1199          {98, 0x35},
1200          {110, 0x34},
1201          {104, 0x34},
1202          {98, 0x34},
1203          {110, 0x33},
1204          {104, 0x33},
1205          {98, 0x33},
1206          {110, 0x32},
1207          {104, 0x32},
1208          {98, 0x32},
1209          {110, 0x31},
1210          {104, 0x31},
1211          {98, 0x31},
1212          {110, 0x30},
1213          {104, 0x30},
1214          {98, 0x30},
1215          {110, 0x6},
1216          {104, 0x6},
1217          {98, 0x6},
1218          {110, 0x5},
1219          {104, 0x5},
1220          {98, 0x5},
1221          {110, 0x4},
1222          {104, 0x4},
1223          {98, 0x4},
1224          {110, 0x3},
1225          {104, 0x3},
1226          {98, 0x3},
1227          {110, 0x2},
1228          {104, 0x2},
1229          {98, 0x2},
1230          {110, 0x1},
1231          {104, 0x1},
1232          {98, 0x1},
1233          {110, 0x0},
1234          {104, 0x0},
1235          {98, 0x0},
1236          {97, 0},
1237          {96, 0},
1238          {95, 0},
1239          {94, 0},
1240          {93, 0},
1241          {92, 0},
1242          {91, 0},
1243          {90, 0},
1244          {89, 0},
1245          {88, 0},
1246          {87, 0},
1247          {86, 0},
1248          {85, 0},
1249          {84, 0},
1250          {83, 0},
1251          {82, 0},
1252          {81, 0},
1253          {80, 0},
1254          {79, 0},
1255          {78, 0},
1256          {77, 0},
1257          {76, 0},
1258          {75, 0},
1259          {74, 0},
1260          {73, 0},
1261          {72, 0},
1262          {71, 0},
1263          {70, 0},
1264          {69, 0},
1265          {68, 0},
1266          {67, 0},
1267          {66, 0},
1268          {65, 0},
1269          {64, 0},
1270          {63, 0},
1271          {62, 0},
1272          {61, 0},
1273          {60, 0},
1274          {59, 0},
1275          }
1276 };
1277
1278 static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
1279                                     u8 is_fat, u8 ctrl_chan_high,
1280                                     struct iwl4965_tx_power_db *tx_power_tbl)
1281 {
1282         u8 saturation_power;
1283         s32 target_power;
1284         s32 user_target_power;
1285         s32 power_limit;
1286         s32 current_temp;
1287         s32 reg_limit;
1288         s32 current_regulatory;
1289         s32 txatten_grp = CALIB_CH_GROUP_MAX;
1290         int i;
1291         int c;
1292         const struct iwl_channel_info *ch_info = NULL;
1293         struct iwl_eeprom_calib_ch_info ch_eeprom_info;
1294         const struct iwl_eeprom_calib_measure *measurement;
1295         s16 voltage;
1296         s32 init_voltage;
1297         s32 voltage_compensation;
1298         s32 degrees_per_05db_num;
1299         s32 degrees_per_05db_denom;
1300         s32 factory_temp;
1301         s32 temperature_comp[2];
1302         s32 factory_gain_index[2];
1303         s32 factory_actual_pwr[2];
1304         s32 power_index;
1305
1306         /* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
1307          *   are used for indexing into txpower table) */
1308         user_target_power = 2 * priv->tx_power_user_lmt;
1309
1310         /* Get current (RXON) channel, band, width */
1311         IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
1312                           is_fat);
1313
1314         ch_info = iwl_get_channel_info(priv, priv->band, channel);
1315
1316         if (!is_channel_valid(ch_info))
1317                 return -EINVAL;
1318
1319         /* get txatten group, used to select 1) thermal txpower adjustment
1320          *   and 2) mimo txpower balance between Tx chains. */
1321         txatten_grp = iwl4965_get_tx_atten_grp(channel);
1322         if (txatten_grp < 0)
1323                 return -EINVAL;
1324
1325         IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
1326                           channel, txatten_grp);
1327
1328         if (is_fat) {
1329                 if (ctrl_chan_high)
1330                         channel -= 2;
1331                 else
1332                         channel += 2;
1333         }
1334
1335         /* hardware txpower limits ...
1336          * saturation (clipping distortion) txpowers are in half-dBm */
1337         if (band)
1338                 saturation_power = priv->calib_info->saturation_power24;
1339         else
1340                 saturation_power = priv->calib_info->saturation_power52;
1341
1342         if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
1343             saturation_power > IWL_TX_POWER_SATURATION_MAX) {
1344                 if (band)
1345                         saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
1346                 else
1347                         saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
1348         }
1349
1350         /* regulatory txpower limits ... reg_limit values are in half-dBm,
1351          *   max_power_avg values are in dBm, convert * 2 */
1352         if (is_fat)
1353                 reg_limit = ch_info->fat_max_power_avg * 2;
1354         else
1355                 reg_limit = ch_info->max_power_avg * 2;
1356
1357         if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
1358             (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
1359                 if (band)
1360                         reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
1361                 else
1362                         reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
1363         }
1364
1365         /* Interpolate txpower calibration values for this channel,
1366          *   based on factory calibration tests on spaced channels. */
1367         iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
1368
1369         /* calculate tx gain adjustment based on power supply voltage */
1370         voltage = priv->calib_info->voltage;
1371         init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
1372         voltage_compensation =
1373             iwl4965_get_voltage_compensation(voltage, init_voltage);
1374
1375         IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
1376                           init_voltage,
1377                           voltage, voltage_compensation);
1378
1379         /* get current temperature (Celsius) */
1380         current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
1381         current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
1382         current_temp = KELVIN_TO_CELSIUS(current_temp);
1383
1384         /* select thermal txpower adjustment params, based on channel group
1385          *   (same frequency group used for mimo txatten adjustment) */
1386         degrees_per_05db_num =
1387             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
1388         degrees_per_05db_denom =
1389             tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
1390
1391         /* get per-chain txpower values from factory measurements */
1392         for (c = 0; c < 2; c++) {
1393                 measurement = &ch_eeprom_info.measurements[c][1];
1394
1395                 /* txgain adjustment (in half-dB steps) based on difference
1396                  *   between factory and current temperature */
1397                 factory_temp = measurement->temperature;
1398                 iwl4965_math_div_round((current_temp - factory_temp) *
1399                                        degrees_per_05db_denom,
1400                                        degrees_per_05db_num,
1401                                        &temperature_comp[c]);
1402
1403                 factory_gain_index[c] = measurement->gain_idx;
1404                 factory_actual_pwr[c] = measurement->actual_pow;
1405
1406                 IWL_DEBUG_TXPOWER("chain = %d\n", c);
1407                 IWL_DEBUG_TXPOWER("fctry tmp %d, "
1408                                   "curr tmp %d, comp %d steps\n",
1409                                   factory_temp, current_temp,
1410                                   temperature_comp[c]);
1411
1412                 IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
1413                                   factory_gain_index[c],
1414                                   factory_actual_pwr[c]);
1415         }
1416
1417         /* for each of 33 bit-rates (including 1 for CCK) */
1418         for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
1419                 u8 is_mimo_rate;
1420                 union iwl4965_tx_power_dual_stream tx_power;
1421
1422                 /* for mimo, reduce each chain's txpower by half
1423                  * (3dB, 6 steps), so total output power is regulatory
1424                  * compliant. */
1425                 if (i & 0x8) {
1426                         current_regulatory = reg_limit -
1427                             IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
1428                         is_mimo_rate = 1;
1429                 } else {
1430                         current_regulatory = reg_limit;
1431                         is_mimo_rate = 0;
1432                 }
1433
1434                 /* find txpower limit, either hardware or regulatory */
1435                 power_limit = saturation_power - back_off_table[i];
1436                 if (power_limit > current_regulatory)
1437                         power_limit = current_regulatory;
1438
1439                 /* reduce user's txpower request if necessary
1440                  * for this rate on this channel */
1441                 target_power = user_target_power;
1442                 if (target_power > power_limit)
1443                         target_power = power_limit;
1444
1445                 IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
1446                                   i, saturation_power - back_off_table[i],
1447                                   current_regulatory, user_target_power,
1448                                   target_power);
1449
1450                 /* for each of 2 Tx chains (radio transmitters) */
1451                 for (c = 0; c < 2; c++) {
1452                         s32 atten_value;
1453
1454                         if (is_mimo_rate)
1455                                 atten_value =
1456                                     (s32)le32_to_cpu(priv->card_alive_init.
1457                                     tx_atten[txatten_grp][c]);
1458                         else
1459                                 atten_value = 0;
1460
1461                         /* calculate index; higher index means lower txpower */
1462                         power_index = (u8) (factory_gain_index[c] -
1463                                             (target_power -
1464                                              factory_actual_pwr[c]) -
1465                                             temperature_comp[c] -
1466                                             voltage_compensation +
1467                                             atten_value);
1468
1469 /*                      IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
1470                                                 power_index); */
1471
1472                         if (power_index < get_min_power_index(i, band))
1473                                 power_index = get_min_power_index(i, band);
1474
1475                         /* adjust 5 GHz index to support negative indexes */
1476                         if (!band)
1477                                 power_index += 9;
1478
1479                         /* CCK, rate 32, reduce txpower for CCK */
1480                         if (i == POWER_TABLE_CCK_ENTRY)
1481                                 power_index +=
1482                                     IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
1483
1484                         /* stay within the table! */
1485                         if (power_index > 107) {
1486                                 IWL_WARNING("txpower index %d > 107\n",
1487                                             power_index);
1488                                 power_index = 107;
1489                         }
1490                         if (power_index < 0) {
1491                                 IWL_WARNING("txpower index %d < 0\n",
1492                                             power_index);
1493                                 power_index = 0;
1494                         }
1495
1496                         /* fill txpower command for this rate/chain */
1497                         tx_power.s.radio_tx_gain[c] =
1498                                 gain_table[band][power_index].radio;
1499                         tx_power.s.dsp_predis_atten[c] =
1500                                 gain_table[band][power_index].dsp;
1501
1502                         IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
1503                                           "gain 0x%02x dsp %d\n",
1504                                           c, atten_value, power_index,
1505                                         tx_power.s.radio_tx_gain[c],
1506                                         tx_power.s.dsp_predis_atten[c]);
1507                 } /* for each chain */
1508
1509                 tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
1510
1511         } /* for each rate */
1512
1513         return 0;
1514 }
1515
1516 /**
1517  * iwl4965_send_tx_power - Configure the TXPOWER level user limit
1518  *
1519  * Uses the active RXON for channel, band, and characteristics (fat, high)
1520  * The power limit is taken from priv->tx_power_user_lmt.
1521  */
1522 static int iwl4965_send_tx_power(struct iwl_priv *priv)
1523 {
1524         struct iwl4965_txpowertable_cmd cmd = { 0 };
1525         int ret;
1526         u8 band = 0;
1527         u8 is_fat = 0;
1528         u8 ctrl_chan_high = 0;
1529
1530         if (test_bit(STATUS_SCANNING, &priv->status)) {
1531                 /* If this gets hit a lot, switch it to a BUG() and catch
1532                  * the stack trace to find out who is calling this during
1533                  * a scan. */
1534                 IWL_WARNING("TX Power requested while scanning!\n");
1535                 return -EAGAIN;
1536         }
1537
1538         band = priv->band == IEEE80211_BAND_2GHZ;
1539
1540         is_fat =  is_fat_channel(priv->active_rxon.flags);
1541
1542         if (is_fat &&
1543             (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1544                 ctrl_chan_high = 1;
1545
1546         cmd.band = band;
1547         cmd.channel = priv->active_rxon.channel;
1548
1549         ret = iwl4965_fill_txpower_tbl(priv, band,
1550                                 le16_to_cpu(priv->active_rxon.channel),
1551                                 is_fat, ctrl_chan_high, &cmd.tx_power);
1552         if (ret)
1553                 goto out;
1554
1555         ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
1556
1557 out:
1558         return ret;
1559 }
1560
1561 static int iwl4965_send_rxon_assoc(struct iwl_priv *priv)
1562 {
1563         int ret = 0;
1564         struct iwl4965_rxon_assoc_cmd rxon_assoc;
1565         const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
1566         const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
1567
1568         if ((rxon1->flags == rxon2->flags) &&
1569             (rxon1->filter_flags == rxon2->filter_flags) &&
1570             (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1571             (rxon1->ofdm_ht_single_stream_basic_rates ==
1572              rxon2->ofdm_ht_single_stream_basic_rates) &&
1573             (rxon1->ofdm_ht_dual_stream_basic_rates ==
1574              rxon2->ofdm_ht_dual_stream_basic_rates) &&
1575             (rxon1->rx_chain == rxon2->rx_chain) &&
1576             (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1577                 IWL_DEBUG_INFO("Using current RXON_ASSOC.  Not resending.\n");
1578                 return 0;
1579         }
1580
1581         rxon_assoc.flags = priv->staging_rxon.flags;
1582         rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1583         rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1584         rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1585         rxon_assoc.reserved = 0;
1586         rxon_assoc.ofdm_ht_single_stream_basic_rates =
1587             priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
1588         rxon_assoc.ofdm_ht_dual_stream_basic_rates =
1589             priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
1590         rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
1591
1592         ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
1593                                      sizeof(rxon_assoc), &rxon_assoc, NULL);
1594         if (ret)
1595                 return ret;
1596
1597         return ret;
1598 }
1599
1600 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
1601 static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
1602 {
1603         int rc;
1604         u8 band = 0;
1605         u8 is_fat = 0;
1606         u8 ctrl_chan_high = 0;
1607         struct iwl4965_channel_switch_cmd cmd = { 0 };
1608         const struct iwl_channel_info *ch_info;
1609
1610         band = priv->band == IEEE80211_BAND_2GHZ;
1611
1612         ch_info = iwl_get_channel_info(priv, priv->band, channel);
1613
1614         is_fat = is_fat_channel(priv->staging_rxon.flags);
1615
1616         if (is_fat &&
1617             (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
1618                 ctrl_chan_high = 1;
1619
1620         cmd.band = band;
1621         cmd.expect_beacon = 0;
1622         cmd.channel = cpu_to_le16(channel);
1623         cmd.rxon_flags = priv->active_rxon.flags;
1624         cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
1625         cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
1626         if (ch_info)
1627                 cmd.expect_beacon = is_channel_radar(ch_info);
1628         else
1629                 cmd.expect_beacon = 1;
1630
1631         rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
1632                                       ctrl_chan_high, &cmd.tx_power);
1633         if (rc) {
1634                 IWL_DEBUG_11H("error:%d  fill txpower_tbl\n", rc);
1635                 return rc;
1636         }
1637
1638         rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
1639         return rc;
1640 }
1641 #endif
1642
1643 /**
1644  * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
1645  */
1646 static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
1647                                             struct iwl_tx_queue *txq,
1648                                             u16 byte_cnt)
1649 {
1650         struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
1651         int txq_id = txq->q.id;
1652         int write_ptr = txq->q.write_ptr;
1653         int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
1654         __le16 bc_ent;
1655
1656         WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
1657
1658         bc_ent = cpu_to_le16(len & 0xFFF);
1659         /* Set up byte count within first 256 entries */
1660         scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
1661
1662         /* If within first 64 entries, duplicate at end */
1663         if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
1664                 scd_bc_tbl[txq_id].
1665                         tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
1666 }
1667
1668 /**
1669  * sign_extend - Sign extend a value using specified bit as sign-bit
1670  *
1671  * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
1672  * and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
1673  *
1674  * @param oper value to sign extend
1675  * @param index 0 based bit index (0<=index<32) to sign bit
1676  */
1677 static s32 sign_extend(u32 oper, int index)
1678 {
1679         u8 shift = 31 - index;
1680
1681         return (s32)(oper << shift) >> shift;
1682 }
1683
1684 /**
1685  * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
1686  * @statistics: Provides the temperature reading from the uCode
1687  *
1688  * A return of <0 indicates bogus data in the statistics
1689  */
1690 static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
1691 {
1692         s32 temperature;
1693         s32 vt;
1694         s32 R1, R2, R3;
1695         u32 R4;
1696
1697         if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
1698                 (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
1699                 IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
1700                 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
1701                 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
1702                 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
1703                 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
1704         } else {
1705                 IWL_DEBUG_TEMP("Running temperature calibration\n");
1706                 R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
1707                 R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
1708                 R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
1709                 R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
1710         }
1711
1712         /*
1713          * Temperature is only 23 bits, so sign extend out to 32.
1714          *
1715          * NOTE If we haven't received a statistics notification yet
1716          * with an updated temperature, use R4 provided to us in the
1717          * "initialize" ALIVE response.
1718          */
1719         if (!test_bit(STATUS_TEMPERATURE, &priv->status))
1720                 vt = sign_extend(R4, 23);
1721         else
1722                 vt = sign_extend(
1723                         le32_to_cpu(priv->statistics.general.temperature), 23);
1724
1725         IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
1726
1727         if (R3 == R1) {
1728                 IWL_ERROR("Calibration conflict R1 == R3\n");
1729                 return -1;
1730         }
1731
1732         /* Calculate temperature in degrees Kelvin, adjust by 97%.
1733          * Add offset to center the adjustment around 0 degrees Centigrade. */
1734         temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
1735         temperature /= (R3 - R1);
1736         temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
1737
1738         IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n",
1739                         temperature, KELVIN_TO_CELSIUS(temperature));
1740
1741         return temperature;
1742 }
1743
1744 /* Adjust Txpower only if temperature variance is greater than threshold. */
1745 #define IWL_TEMPERATURE_THRESHOLD   3
1746
1747 /**
1748  * iwl4965_is_temp_calib_needed - determines if new calibration is needed
1749  *
1750  * If the temperature changed has changed sufficiently, then a recalibration
1751  * is needed.
1752  *
1753  * Assumes caller will replace priv->last_temperature once calibration
1754  * executed.
1755  */
1756 static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
1757 {
1758         int temp_diff;
1759
1760         if (!test_bit(STATUS_STATISTICS, &priv->status)) {
1761                 IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
1762                 return 0;
1763         }
1764
1765         temp_diff = priv->temperature - priv->last_temperature;
1766
1767         /* get absolute value */
1768         if (temp_diff < 0) {
1769                 IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
1770                 temp_diff = -temp_diff;
1771         } else if (temp_diff == 0)
1772                 IWL_DEBUG_POWER("Same temp, \n");
1773         else
1774                 IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
1775
1776         if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
1777                 IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
1778                 return 0;
1779         }
1780
1781         IWL_DEBUG_POWER("Thermal txpower calib needed\n");
1782
1783         return 1;
1784 }
1785
1786 static void iwl4965_temperature_calib(struct iwl_priv *priv)
1787 {
1788         s32 temp;
1789
1790         temp = iwl4965_hw_get_temperature(priv);
1791         if (temp < 0)
1792                 return;
1793
1794         if (priv->temperature != temp) {
1795                 if (priv->temperature)
1796                         IWL_DEBUG_TEMP("Temperature changed "
1797                                        "from %dC to %dC\n",
1798                                        KELVIN_TO_CELSIUS(priv->temperature),
1799                                        KELVIN_TO_CELSIUS(temp));
1800                 else
1801                         IWL_DEBUG_TEMP("Temperature "
1802                                        "initialized to %dC\n",
1803                                        KELVIN_TO_CELSIUS(temp));
1804         }
1805
1806         priv->temperature = temp;
1807         set_bit(STATUS_TEMPERATURE, &priv->status);
1808
1809         if (!priv->disable_tx_power_cal &&
1810              unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
1811              iwl4965_is_temp_calib_needed(priv))
1812                 queue_work(priv->workqueue, &priv->txpower_work);
1813 }
1814
1815 /**
1816  * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
1817  */
1818 static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
1819                                             u16 txq_id)
1820 {
1821         /* Simply stop the queue, but don't change any configuration;
1822          * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
1823         iwl_write_prph(priv,
1824                 IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
1825                 (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
1826                 (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
1827 }
1828
1829 /**
1830  * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
1831  * priv->lock must be held by the caller
1832  */
1833 static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
1834                                    u16 ssn_idx, u8 tx_fifo)
1835 {
1836         int ret = 0;
1837
1838         if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
1839             (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
1840                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1841                         txq_id, IWL49_FIRST_AMPDU_QUEUE,
1842                         IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
1843                 return -EINVAL;
1844         }
1845
1846         ret = iwl_grab_nic_access(priv);
1847         if (ret)
1848                 return ret;
1849
1850         iwl4965_tx_queue_stop_scheduler(priv, txq_id);
1851
1852         iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
1853
1854         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1855         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1856         /* supposes that ssn_idx is valid (!= 0xFFF) */
1857         iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
1858
1859         iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
1860         iwl_txq_ctx_deactivate(priv, txq_id);
1861         iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
1862
1863         iwl_release_nic_access(priv);
1864
1865         return 0;
1866 }
1867
1868 /**
1869  * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
1870  */
1871 static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
1872                                         u16 txq_id)
1873 {
1874         u32 tbl_dw_addr;
1875         u32 tbl_dw;
1876         u16 scd_q2ratid;
1877
1878         scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
1879
1880         tbl_dw_addr = priv->scd_base_addr +
1881                         IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
1882
1883         tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
1884
1885         if (txq_id & 0x1)
1886                 tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
1887         else
1888                 tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
1889
1890         iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
1891
1892         return 0;
1893 }
1894
1895
1896 /**
1897  * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
1898  *
1899  * NOTE:  txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
1900  *        i.e. it must be one of the higher queues used for aggregation
1901  */
1902 static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
1903                                   int tx_fifo, int sta_id, int tid, u16 ssn_idx)
1904 {
1905         unsigned long flags;
1906         int ret;
1907         u16 ra_tid;
1908
1909         if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
1910             (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
1911                 IWL_WARNING("queue number out of range: %d, must be %d to %d\n",
1912                         txq_id, IWL49_FIRST_AMPDU_QUEUE,
1913                         IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
1914                 return -EINVAL;
1915         }
1916
1917         ra_tid = BUILD_RAxTID(sta_id, tid);
1918
1919         /* Modify device's station table to Tx this TID */
1920         iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
1921
1922         spin_lock_irqsave(&priv->lock, flags);
1923         ret = iwl_grab_nic_access(priv);
1924         if (ret) {
1925                 spin_unlock_irqrestore(&priv->lock, flags);
1926                 return ret;
1927         }
1928
1929         /* Stop this Tx queue before configuring it */
1930         iwl4965_tx_queue_stop_scheduler(priv, txq_id);
1931
1932         /* Map receiver-address / traffic-ID to this queue */
1933         iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
1934
1935         /* Set this queue as a chain-building queue */
1936         iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
1937
1938         /* Place first TFD at index corresponding to start sequence number.
1939          * Assumes that ssn_idx is valid (!= 0xFFF) */
1940         priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
1941         priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
1942         iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
1943
1944         /* Set up Tx window size and frame limit for this queue */
1945         iwl_write_targ_mem(priv,
1946                 priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
1947                 (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
1948                 IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
1949
1950         iwl_write_targ_mem(priv, priv->scd_base_addr +
1951                 IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
1952                 (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
1953                 & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
1954
1955         iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
1956
1957         /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
1958         iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
1959
1960         iwl_release_nic_access(priv);
1961         spin_unlock_irqrestore(&priv->lock, flags);
1962
1963         return 0;
1964 }
1965
1966
1967 static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
1968 {
1969         switch (cmd_id) {
1970         case REPLY_RXON:
1971                 return (u16) sizeof(struct iwl4965_rxon_cmd);
1972         default:
1973                 return len;
1974         }
1975 }
1976
1977 static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
1978 {
1979         struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
1980         addsta->mode = cmd->mode;
1981         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
1982         memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
1983         addsta->station_flags = cmd->station_flags;
1984         addsta->station_flags_msk = cmd->station_flags_msk;
1985         addsta->tid_disable_tx = cmd->tid_disable_tx;
1986         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
1987         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
1988         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
1989         addsta->reserved1 = __constant_cpu_to_le16(0);
1990         addsta->reserved2 = __constant_cpu_to_le32(0);
1991
1992         return (u16)sizeof(struct iwl4965_addsta_cmd);
1993 }
1994
1995 static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
1996 {
1997         return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
1998 }
1999
2000 /**
2001  * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
2002  */
2003 static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
2004                                       struct iwl_ht_agg *agg,
2005                                       struct iwl4965_tx_resp *tx_resp,
2006                                       int txq_id, u16 start_idx)
2007 {
2008         u16 status;
2009         struct agg_tx_status *frame_status = tx_resp->u.agg_status;
2010         struct ieee80211_tx_info *info = NULL;
2011         struct ieee80211_hdr *hdr = NULL;
2012         u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
2013         int i, sh, idx;
2014         u16 seq;
2015         if (agg->wait_for_ba)
2016                 IWL_DEBUG_TX_REPLY("got tx response w/o block-ack\n");
2017
2018         agg->frame_count = tx_resp->frame_count;
2019         agg->start_idx = start_idx;
2020         agg->rate_n_flags = rate_n_flags;
2021         agg->bitmap = 0;
2022
2023         /* num frames attempted by Tx command */
2024         if (agg->frame_count == 1) {
2025                 /* Only one frame was attempted; no block-ack will arrive */
2026                 status = le16_to_cpu(frame_status[0].status);
2027                 idx = start_idx;
2028
2029                 /* FIXME: code repetition */
2030                 IWL_DEBUG_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
2031                                    agg->frame_count, agg->start_idx, idx);
2032
2033                 info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
2034                 info->status.rates[0].count = tx_resp->failure_frame + 1;
2035                 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
2036                 info->flags |= iwl_is_tx_success(status) ?
2037                         IEEE80211_TX_STAT_ACK : 0;
2038                 iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
2039                 /* FIXME: code repetition end */
2040
2041                 IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
2042                                     status & 0xff, tx_resp->failure_frame);
2043                 IWL_DEBUG_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
2044
2045                 agg->wait_for_ba = 0;
2046         } else {
2047                 /* Two or more frames were attempted; expect block-ack */
2048                 u64 bitmap = 0;
2049                 int start = agg->start_idx;
2050
2051                 /* Construct bit-map of pending frames within Tx window */
2052                 for (i = 0; i < agg->frame_count; i++) {
2053                         u16 sc;
2054                         status = le16_to_cpu(frame_status[i].status);
2055                         seq  = le16_to_cpu(frame_status[i].sequence);
2056                         idx = SEQ_TO_INDEX(seq);
2057                         txq_id = SEQ_TO_QUEUE(seq);
2058
2059                         if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
2060                                       AGG_TX_STATE_ABORT_MSK))
2061                                 continue;
2062
2063                         IWL_DEBUG_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
2064                                            agg->frame_count, txq_id, idx);
2065
2066                         hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
2067
2068                         sc = le16_to_cpu(hdr->seq_ctrl);
2069                         if (idx != (SEQ_TO_SN(sc) & 0xff)) {
2070                                 IWL_ERROR("BUG_ON idx doesn't match seq control"
2071                                           " idx=%d, seq_idx=%d, seq=%d\n",
2072                                           idx, SEQ_TO_SN(sc),
2073                                           hdr->seq_ctrl);
2074                                 return -1;
2075                         }
2076
2077                         IWL_DEBUG_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
2078                                            i, idx, SEQ_TO_SN(sc));
2079
2080                         sh = idx - start;
2081                         if (sh > 64) {
2082                                 sh = (start - idx) + 0xff;
2083                                 bitmap = bitmap << sh;
2084                                 sh = 0;
2085                                 start = idx;
2086                         } else if (sh < -64)
2087                                 sh  = 0xff - (start - idx);
2088                         else if (sh < 0) {
2089                                 sh = start - idx;
2090                                 start = idx;
2091                                 bitmap = bitmap << sh;
2092                                 sh = 0;
2093                         }
2094                         bitmap |= 1ULL << sh;
2095                         IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n",
2096                                            start, (unsigned long long)bitmap);
2097                 }
2098
2099                 agg->bitmap = bitmap;
2100                 agg->start_idx = start;
2101                 IWL_DEBUG_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
2102                                    agg->frame_count, agg->start_idx,
2103                                    (unsigned long long)agg->bitmap);
2104
2105                 if (bitmap)
2106                         agg->wait_for_ba = 1;
2107         }
2108         return 0;
2109 }
2110
2111 /**
2112  * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
2113  */
2114 static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
2115                                 struct iwl_rx_mem_buffer *rxb)
2116 {
2117         struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
2118         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
2119         int txq_id = SEQ_TO_QUEUE(sequence);
2120         int index = SEQ_TO_INDEX(sequence);
2121         struct iwl_tx_queue *txq = &priv->txq[txq_id];
2122         struct ieee80211_hdr *hdr;
2123         struct ieee80211_tx_info *info;
2124         struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
2125         u32  status = le32_to_cpu(tx_resp->u.status);
2126         int tid = MAX_TID_COUNT;
2127         int sta_id;
2128         int freed;
2129         u8 *qc = NULL;
2130
2131         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
2132                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
2133                           "is out of range [0-%d] %d %d\n", txq_id,
2134                           index, txq->q.n_bd, txq->q.write_ptr,
2135                           txq->q.read_ptr);
2136                 return;
2137         }
2138
2139         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
2140         memset(&info->status, 0, sizeof(info->status));
2141
2142         hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
2143         if (ieee80211_is_data_qos(hdr->frame_control)) {
2144                 qc = ieee80211_get_qos_ctl(hdr);
2145                 tid = qc[0] & 0xf;
2146         }
2147
2148         sta_id = iwl_get_ra_sta_id(priv, hdr);
2149         if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
2150                 IWL_ERROR("Station not known\n");
2151                 return;
2152         }
2153
2154         if (txq->sched_retry) {
2155                 const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
2156                 struct iwl_ht_agg *agg = NULL;
2157
2158                 WARN_ON(!qc);
2159
2160                 agg = &priv->stations[sta_id].tid[tid].agg;
2161
2162                 iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
2163
2164                 /* check if BAR is needed */
2165                 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
2166                         info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
2167
2168                 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
2169                         index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
2170                         IWL_DEBUG_TX_REPLY("Retry scheduler reclaim scd_ssn "
2171                                            "%d index %d\n", scd_ssn , index);
2172                         freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2173                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2174
2175                         if (priv->mac80211_registered &&
2176                             (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
2177                             (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
2178                                 if (agg->state == IWL_AGG_OFF)
2179                                         ieee80211_wake_queue(priv->hw, txq_id);
2180                                 else
2181                                         ieee80211_wake_queue(priv->hw,
2182                                                              txq->swq_id);
2183                         }
2184                 }
2185         } else {
2186                 info->status.rates[0].count = tx_resp->failure_frame + 1;
2187                 info->flags |= iwl_is_tx_success(status) ?
2188                                         IEEE80211_TX_STAT_ACK : 0;
2189                 iwl_hwrate_to_tx_control(priv,
2190                                         le32_to_cpu(tx_resp->rate_n_flags),
2191                                         info);
2192
2193                 IWL_DEBUG_TX_REPLY("TXQ %d status %s (0x%08x) "
2194                                    "rate_n_flags 0x%x retries %d\n",
2195                                    txq_id,
2196                                    iwl_get_tx_fail_reason(status), status,
2197                                    le32_to_cpu(tx_resp->rate_n_flags),
2198                                    tx_resp->failure_frame);
2199
2200                 freed = iwl_tx_queue_reclaim(priv, txq_id, index);
2201                 if (qc && likely(sta_id != IWL_INVALID_STATION))
2202                         priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
2203
2204                 if (priv->mac80211_registered &&
2205                     (iwl_queue_space(&txq->q) > txq->q.low_mark))
2206                         ieee80211_wake_queue(priv->hw, txq_id);
2207         }
2208
2209         if (qc && likely(sta_id != IWL_INVALID_STATION))
2210                 iwl_txq_check_empty(priv, sta_id, tid, txq_id);
2211
2212         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
2213                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
2214 }
2215
2216 static int iwl4965_calc_rssi(struct iwl_priv *priv,
2217                              struct iwl_rx_phy_res *rx_resp)
2218 {
2219         /* data from PHY/DSP regarding signal strength, etc.,
2220          *   contents are always there, not configurable by host.  */
2221         struct iwl4965_rx_non_cfg_phy *ncphy =
2222             (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
2223         u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
2224                         >> IWL49_AGC_DB_POS;
2225
2226         u32 valid_antennae =
2227             (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
2228                         >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
2229         u8 max_rssi = 0;
2230         u32 i;
2231
2232         /* Find max rssi among 3 possible receivers.
2233          * These values are measured by the digital signal processor (DSP).
2234          * They should stay fairly constant even as the signal strength varies,
2235          *   if the radio's automatic gain control (AGC) is working right.
2236          * AGC value (see below) will provide the "interesting" info. */
2237         for (i = 0; i < 3; i++)
2238                 if (valid_antennae & (1 << i))
2239                         max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
2240
2241         IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
2242                 ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
2243                 max_rssi, agc);
2244
2245         /* dBm = max_rssi dB - agc dB - constant.
2246          * Higher AGC (higher radio gain) means lower signal. */
2247         return max_rssi - agc - IWL_RSSI_OFFSET;
2248 }
2249
2250
2251 /* Set up 4965-specific Rx frame reply handlers */
2252 static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
2253 {
2254         /* Legacy Rx frames */
2255         priv->rx_handlers[REPLY_RX] = iwl_rx_reply_rx;
2256         /* Tx response */
2257         priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
2258 }
2259
2260 static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
2261 {
2262         INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
2263 }
2264
2265 static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
2266 {
2267         cancel_work_sync(&priv->txpower_work);
2268 }
2269
2270
2271 static struct iwl_hcmd_ops iwl4965_hcmd = {
2272         .rxon_assoc = iwl4965_send_rxon_assoc,
2273 };
2274
2275 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
2276         .get_hcmd_size = iwl4965_get_hcmd_size,
2277         .build_addsta_hcmd = iwl4965_build_addsta_hcmd,
2278         .chain_noise_reset = iwl4965_chain_noise_reset,
2279         .gain_computation = iwl4965_gain_computation,
2280         .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
2281         .calc_rssi = iwl4965_calc_rssi,
2282 };
2283
2284 static struct iwl_lib_ops iwl4965_lib = {
2285         .set_hw_params = iwl4965_hw_set_hw_params,
2286         .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
2287         .txq_set_sched = iwl4965_txq_set_sched,
2288         .txq_agg_enable = iwl4965_txq_agg_enable,
2289         .txq_agg_disable = iwl4965_txq_agg_disable,
2290         .rx_handler_setup = iwl4965_rx_handler_setup,
2291         .setup_deferred_work = iwl4965_setup_deferred_work,
2292         .cancel_deferred_work = iwl4965_cancel_deferred_work,
2293         .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
2294         .alive_notify = iwl4965_alive_notify,
2295         .init_alive_start = iwl4965_init_alive_start,
2296         .load_ucode = iwl4965_load_bsm,
2297         .apm_ops = {
2298                 .init = iwl4965_apm_init,
2299                 .reset = iwl4965_apm_reset,
2300                 .stop = iwl4965_apm_stop,
2301                 .config = iwl4965_nic_config,
2302                 .set_pwr_src = iwl_set_pwr_src,
2303         },
2304         .eeprom_ops = {
2305                 .regulatory_bands = {
2306                         EEPROM_REGULATORY_BAND_1_CHANNELS,
2307                         EEPROM_REGULATORY_BAND_2_CHANNELS,
2308                         EEPROM_REGULATORY_BAND_3_CHANNELS,
2309                         EEPROM_REGULATORY_BAND_4_CHANNELS,
2310                         EEPROM_REGULATORY_BAND_5_CHANNELS,
2311                         EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
2312                         EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
2313                 },
2314                 .verify_signature  = iwlcore_eeprom_verify_signature,
2315                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
2316                 .release_semaphore = iwlcore_eeprom_release_semaphore,
2317                 .calib_version = iwl4965_eeprom_calib_version,
2318                 .query_addr = iwlcore_eeprom_query_addr,
2319         },
2320         .send_tx_power  = iwl4965_send_tx_power,
2321         .update_chain_flags = iwl_update_chain_flags,
2322         .temperature = iwl4965_temperature_calib,
2323 };
2324
2325 static struct iwl_ops iwl4965_ops = {
2326         .lib = &iwl4965_lib,
2327         .hcmd = &iwl4965_hcmd,
2328         .utils = &iwl4965_hcmd_utils,
2329 };
2330
2331 struct iwl_cfg iwl4965_agn_cfg = {
2332         .name = "4965AGN",
2333         .fw_name_pre = IWL4965_FW_PRE,
2334         .ucode_api_max = IWL4965_UCODE_API_MAX,
2335         .ucode_api_min = IWL4965_UCODE_API_MIN,
2336         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
2337         .eeprom_size = IWL4965_EEPROM_IMG_SIZE,
2338         .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
2339         .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
2340         .ops = &iwl4965_ops,
2341         .mod_params = &iwl4965_mod_params,
2342 };
2343
2344 /* Module firmware */
2345 MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
2346
2347 module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
2348 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
2349 module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
2350 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
2351 module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
2352 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
2353 module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
2354 MODULE_PARM_DESC(debug, "debug output mask");
2355 module_param_named(
2356         disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
2357 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
2358
2359 module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
2360 MODULE_PARM_DESC(queues_num, "number of hw queues.");
2361 /* 11n */
2362 module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
2363 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
2364 module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
2365 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
2366
2367 module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
2368 MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");