Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
[linux-2.6.git] / drivers / net / wireless / iwlwifi / iwl-3945.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/slab.h>
31 #include <linux/pci.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/delay.h>
34 #include <linux/sched.h>
35 #include <linux/skbuff.h>
36 #include <linux/netdevice.h>
37 #include <linux/wireless.h>
38 #include <linux/firmware.h>
39 #include <linux/etherdevice.h>
40 #include <asm/unaligned.h>
41 #include <net/mac80211.h>
42
43 #include "iwl-fh.h"
44 #include "iwl-3945-fh.h"
45 #include "iwl-commands.h"
46 #include "iwl-sta.h"
47 #include "iwl-3945.h"
48 #include "iwl-eeprom.h"
49 #include "iwl-core.h"
50 #include "iwl-helpers.h"
51 #include "iwl-led.h"
52 #include "iwl-3945-led.h"
53 #include "iwl-3945-debugfs.h"
54 #include "iwl-legacy.h"
55
56 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
57         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
58                                     IWL_RATE_##r##M_IEEE,   \
59                                     IWL_RATE_##ip##M_INDEX, \
60                                     IWL_RATE_##in##M_INDEX, \
61                                     IWL_RATE_##rp##M_INDEX, \
62                                     IWL_RATE_##rn##M_INDEX, \
63                                     IWL_RATE_##pp##M_INDEX, \
64                                     IWL_RATE_##np##M_INDEX, \
65                                     IWL_RATE_##r##M_INDEX_TABLE, \
66                                     IWL_RATE_##ip##M_INDEX_TABLE }
67
68 /*
69  * Parameter order:
70  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
71  *
72  * If there isn't a valid next or previous rate then INV is used which
73  * maps to IWL_RATE_INVALID
74  *
75  */
76 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
77         IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
78         IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
79         IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
80         IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
81         IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
82         IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
83         IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
84         IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
85         IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
86         IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
87         IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
88         IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
89 };
90
91 static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
92 {
93         u8 rate = iwl3945_rates[rate_index].prev_ieee;
94
95         if (rate == IWL_RATE_INVALID)
96                 rate = rate_index;
97         return rate;
98 }
99
100 /* 1 = enable the iwl3945_disable_events() function */
101 #define IWL_EVT_DISABLE (0)
102 #define IWL_EVT_DISABLE_SIZE (1532/32)
103
104 /**
105  * iwl3945_disable_events - Disable selected events in uCode event log
106  *
107  * Disable an event by writing "1"s into "disable"
108  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
109  *   Default values of 0 enable uCode events to be logged.
110  * Use for only special debugging.  This function is just a placeholder as-is,
111  *   you'll need to provide the special bits! ...
112  *   ... and set IWL_EVT_DISABLE to 1. */
113 void iwl3945_disable_events(struct iwl_priv *priv)
114 {
115         int i;
116         u32 base;               /* SRAM address of event log header */
117         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
118         u32 array_size;         /* # of u32 entries in array */
119         static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
120                 0x00000000,     /*   31 -    0  Event id numbers */
121                 0x00000000,     /*   63 -   32 */
122                 0x00000000,     /*   95 -   64 */
123                 0x00000000,     /*  127 -   96 */
124                 0x00000000,     /*  159 -  128 */
125                 0x00000000,     /*  191 -  160 */
126                 0x00000000,     /*  223 -  192 */
127                 0x00000000,     /*  255 -  224 */
128                 0x00000000,     /*  287 -  256 */
129                 0x00000000,     /*  319 -  288 */
130                 0x00000000,     /*  351 -  320 */
131                 0x00000000,     /*  383 -  352 */
132                 0x00000000,     /*  415 -  384 */
133                 0x00000000,     /*  447 -  416 */
134                 0x00000000,     /*  479 -  448 */
135                 0x00000000,     /*  511 -  480 */
136                 0x00000000,     /*  543 -  512 */
137                 0x00000000,     /*  575 -  544 */
138                 0x00000000,     /*  607 -  576 */
139                 0x00000000,     /*  639 -  608 */
140                 0x00000000,     /*  671 -  640 */
141                 0x00000000,     /*  703 -  672 */
142                 0x00000000,     /*  735 -  704 */
143                 0x00000000,     /*  767 -  736 */
144                 0x00000000,     /*  799 -  768 */
145                 0x00000000,     /*  831 -  800 */
146                 0x00000000,     /*  863 -  832 */
147                 0x00000000,     /*  895 -  864 */
148                 0x00000000,     /*  927 -  896 */
149                 0x00000000,     /*  959 -  928 */
150                 0x00000000,     /*  991 -  960 */
151                 0x00000000,     /* 1023 -  992 */
152                 0x00000000,     /* 1055 - 1024 */
153                 0x00000000,     /* 1087 - 1056 */
154                 0x00000000,     /* 1119 - 1088 */
155                 0x00000000,     /* 1151 - 1120 */
156                 0x00000000,     /* 1183 - 1152 */
157                 0x00000000,     /* 1215 - 1184 */
158                 0x00000000,     /* 1247 - 1216 */
159                 0x00000000,     /* 1279 - 1248 */
160                 0x00000000,     /* 1311 - 1280 */
161                 0x00000000,     /* 1343 - 1312 */
162                 0x00000000,     /* 1375 - 1344 */
163                 0x00000000,     /* 1407 - 1376 */
164                 0x00000000,     /* 1439 - 1408 */
165                 0x00000000,     /* 1471 - 1440 */
166                 0x00000000,     /* 1503 - 1472 */
167         };
168
169         base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
170         if (!iwl3945_hw_valid_rtc_data_addr(base)) {
171                 IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
172                 return;
173         }
174
175         disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
176         array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
177
178         if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
179                 IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
180                                disable_ptr);
181                 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
182                         iwl_write_targ_mem(priv,
183                                            disable_ptr + (i * sizeof(u32)),
184                                            evt_disable[i]);
185
186         } else {
187                 IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
188                 IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
189                 IWL_DEBUG_INFO(priv, "  in SRAM at 0x%x, size %d u32s\n",
190                                disable_ptr, array_size);
191         }
192
193 }
194
195 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
196 {
197         int idx;
198
199         for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
200                 if (iwl3945_rates[idx].plcp == plcp)
201                         return idx;
202         return -1;
203 }
204
205 #ifdef CONFIG_IWLWIFI_DEBUG
206 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
207
208 static const char *iwl3945_get_tx_fail_reason(u32 status)
209 {
210         switch (status & TX_STATUS_MSK) {
211         case TX_3945_STATUS_SUCCESS:
212                 return "SUCCESS";
213                 TX_STATUS_ENTRY(SHORT_LIMIT);
214                 TX_STATUS_ENTRY(LONG_LIMIT);
215                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
216                 TX_STATUS_ENTRY(MGMNT_ABORT);
217                 TX_STATUS_ENTRY(NEXT_FRAG);
218                 TX_STATUS_ENTRY(LIFE_EXPIRE);
219                 TX_STATUS_ENTRY(DEST_PS);
220                 TX_STATUS_ENTRY(ABORTED);
221                 TX_STATUS_ENTRY(BT_RETRY);
222                 TX_STATUS_ENTRY(STA_INVALID);
223                 TX_STATUS_ENTRY(FRAG_DROPPED);
224                 TX_STATUS_ENTRY(TID_DISABLE);
225                 TX_STATUS_ENTRY(FRAME_FLUSHED);
226                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
227                 TX_STATUS_ENTRY(TX_LOCKED);
228                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
229         }
230
231         return "UNKNOWN";
232 }
233 #else
234 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
235 {
236         return "";
237 }
238 #endif
239
240 /*
241  * get ieee prev rate from rate scale table.
242  * for A and B mode we need to overright prev
243  * value
244  */
245 int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
246 {
247         int next_rate = iwl3945_get_prev_ieee_rate(rate);
248
249         switch (priv->band) {
250         case IEEE80211_BAND_5GHZ:
251                 if (rate == IWL_RATE_12M_INDEX)
252                         next_rate = IWL_RATE_9M_INDEX;
253                 else if (rate == IWL_RATE_6M_INDEX)
254                         next_rate = IWL_RATE_6M_INDEX;
255                 break;
256         case IEEE80211_BAND_2GHZ:
257                 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
258                     iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
259                         if (rate == IWL_RATE_11M_INDEX)
260                                 next_rate = IWL_RATE_5M_INDEX;
261                 }
262                 break;
263
264         default:
265                 break;
266         }
267
268         return next_rate;
269 }
270
271
272 /**
273  * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
274  *
275  * When FW advances 'R' index, all entries between old and new 'R' index
276  * need to be reclaimed. As result, some free space forms. If there is
277  * enough free space (> low mark), wake the stack that feeds us.
278  */
279 static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
280                                      int txq_id, int index)
281 {
282         struct iwl_tx_queue *txq = &priv->txq[txq_id];
283         struct iwl_queue *q = &txq->q;
284         struct iwl_tx_info *tx_info;
285
286         BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM);
287
288         for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
289                 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
290
291                 tx_info = &txq->txb[txq->q.read_ptr];
292                 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
293                 tx_info->skb = NULL;
294                 priv->cfg->ops->lib->txq_free_tfd(priv, txq);
295         }
296
297         if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
298                         (txq_id != IWL39_CMD_QUEUE_NUM) &&
299                         priv->mac80211_registered)
300                 iwl_wake_queue(priv, txq);
301 }
302
303 /**
304  * iwl3945_rx_reply_tx - Handle Tx response
305  */
306 static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
307                                 struct iwl_rx_mem_buffer *rxb)
308 {
309         struct iwl_rx_packet *pkt = rxb_addr(rxb);
310         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
311         int txq_id = SEQ_TO_QUEUE(sequence);
312         int index = SEQ_TO_INDEX(sequence);
313         struct iwl_tx_queue *txq = &priv->txq[txq_id];
314         struct ieee80211_tx_info *info;
315         struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
316         u32  status = le32_to_cpu(tx_resp->status);
317         int rate_idx;
318         int fail;
319
320         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
321                 IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
322                           "is out of range [0-%d] %d %d\n", txq_id,
323                           index, txq->q.n_bd, txq->q.write_ptr,
324                           txq->q.read_ptr);
325                 return;
326         }
327
328         txq->time_stamp = jiffies;
329         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
330         ieee80211_tx_info_clear_status(info);
331
332         /* Fill the MRR chain with some info about on-chip retransmissions */
333         rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
334         if (info->band == IEEE80211_BAND_5GHZ)
335                 rate_idx -= IWL_FIRST_OFDM_RATE;
336
337         fail = tx_resp->failure_frame;
338
339         info->status.rates[0].idx = rate_idx;
340         info->status.rates[0].count = fail + 1; /* add final attempt */
341
342         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
343         info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
344                                 IEEE80211_TX_STAT_ACK : 0;
345
346         IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
347                         txq_id, iwl3945_get_tx_fail_reason(status), status,
348                         tx_resp->rate, tx_resp->failure_frame);
349
350         IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
351         iwl3945_tx_queue_reclaim(priv, txq_id, index);
352
353         if (status & TX_ABORT_REQUIRED_MSK)
354                 IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
355 }
356
357
358
359 /*****************************************************************************
360  *
361  * Intel PRO/Wireless 3945ABG/BG Network Connection
362  *
363  *  RX handler implementations
364  *
365  *****************************************************************************/
366 #ifdef CONFIG_IWLWIFI_DEBUGFS
367 /*
368  *  based on the assumption of all statistics counter are in DWORD
369  *  FIXME: This function is for debugging, do not deal with
370  *  the case of counters roll-over.
371  */
372 static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
373                                             __le32 *stats)
374 {
375         int i;
376         __le32 *prev_stats;
377         u32 *accum_stats;
378         u32 *delta, *max_delta;
379
380         prev_stats = (__le32 *)&priv->_3945.statistics;
381         accum_stats = (u32 *)&priv->_3945.accum_statistics;
382         delta = (u32 *)&priv->_3945.delta_statistics;
383         max_delta = (u32 *)&priv->_3945.max_delta;
384
385         for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
386              i += sizeof(__le32), stats++, prev_stats++, delta++,
387              max_delta++, accum_stats++) {
388                 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
389                         *delta = (le32_to_cpu(*stats) -
390                                 le32_to_cpu(*prev_stats));
391                         *accum_stats += *delta;
392                         if (*delta > *max_delta)
393                                 *max_delta = *delta;
394                 }
395         }
396
397         /* reset accumulative statistics for "no-counter" type statistics */
398         priv->_3945.accum_statistics.general.temperature =
399                 priv->_3945.statistics.general.temperature;
400         priv->_3945.accum_statistics.general.ttl_timestamp =
401                 priv->_3945.statistics.general.ttl_timestamp;
402 }
403 #endif
404
405 /**
406  * iwl3945_good_plcp_health - checks for plcp error.
407  *
408  * When the plcp error is exceeding the thresholds, reset the radio
409  * to improve the throughput.
410  */
411 static bool iwl3945_good_plcp_health(struct iwl_priv *priv,
412                                 struct iwl_rx_packet *pkt)
413 {
414         bool rc = true;
415         struct iwl3945_notif_statistics current_stat;
416         int combined_plcp_delta;
417         unsigned int plcp_msec;
418         unsigned long plcp_received_jiffies;
419
420         if (priv->cfg->base_params->plcp_delta_threshold ==
421             IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
422                 IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
423                 return rc;
424         }
425         memcpy(&current_stat, pkt->u.raw, sizeof(struct
426                         iwl3945_notif_statistics));
427         /*
428          * check for plcp_err and trigger radio reset if it exceeds
429          * the plcp error threshold plcp_delta.
430          */
431         plcp_received_jiffies = jiffies;
432         plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
433                                         (long) priv->plcp_jiffies);
434         priv->plcp_jiffies = plcp_received_jiffies;
435         /*
436          * check to make sure plcp_msec is not 0 to prevent division
437          * by zero.
438          */
439         if (plcp_msec) {
440                 combined_plcp_delta =
441                         (le32_to_cpu(current_stat.rx.ofdm.plcp_err) -
442                         le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err));
443
444                 if ((combined_plcp_delta > 0) &&
445                         ((combined_plcp_delta * 100) / plcp_msec) >
446                         priv->cfg->base_params->plcp_delta_threshold) {
447                         /*
448                          * if plcp_err exceed the threshold, the following
449                          * data is printed in csv format:
450                          *    Text: plcp_err exceeded %d,
451                          *    Received ofdm.plcp_err,
452                          *    Current ofdm.plcp_err,
453                          *    combined_plcp_delta,
454                          *    plcp_msec
455                          */
456                         IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
457                                 "%u, %d, %u mSecs\n",
458                                 priv->cfg->base_params->plcp_delta_threshold,
459                                 le32_to_cpu(current_stat.rx.ofdm.plcp_err),
460                                 combined_plcp_delta, plcp_msec);
461                         /*
462                          * Reset the RF radio due to the high plcp
463                          * error rate
464                          */
465                         rc = false;
466                 }
467         }
468         return rc;
469 }
470
471 void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
472                 struct iwl_rx_mem_buffer *rxb)
473 {
474         struct iwl_rx_packet *pkt = rxb_addr(rxb);
475
476         IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
477                      (int)sizeof(struct iwl3945_notif_statistics),
478                      le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
479 #ifdef CONFIG_IWLWIFI_DEBUGFS
480         iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
481 #endif
482         iwl_recover_from_statistics(priv, pkt);
483
484         memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
485 }
486
487 void iwl3945_reply_statistics(struct iwl_priv *priv,
488                               struct iwl_rx_mem_buffer *rxb)
489 {
490         struct iwl_rx_packet *pkt = rxb_addr(rxb);
491         __le32 *flag = (__le32 *)&pkt->u.raw;
492
493         if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
494 #ifdef CONFIG_IWLWIFI_DEBUGFS
495                 memset(&priv->_3945.accum_statistics, 0,
496                         sizeof(struct iwl3945_notif_statistics));
497                 memset(&priv->_3945.delta_statistics, 0,
498                         sizeof(struct iwl3945_notif_statistics));
499                 memset(&priv->_3945.max_delta, 0,
500                         sizeof(struct iwl3945_notif_statistics));
501 #endif
502                 IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
503         }
504         iwl3945_hw_rx_statistics(priv, rxb);
505 }
506
507
508 /******************************************************************************
509  *
510  * Misc. internal state and helper functions
511  *
512  ******************************************************************************/
513
514 /* This is necessary only for a number of statistics, see the caller. */
515 static int iwl3945_is_network_packet(struct iwl_priv *priv,
516                 struct ieee80211_hdr *header)
517 {
518         /* Filter incoming packets to determine if they are targeted toward
519          * this network, discarding packets coming from ourselves */
520         switch (priv->iw_mode) {
521         case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
522                 /* packets to our IBSS update information */
523                 return !compare_ether_addr(header->addr3, priv->bssid);
524         case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
525                 /* packets to our IBSS update information */
526                 return !compare_ether_addr(header->addr2, priv->bssid);
527         default:
528                 return 1;
529         }
530 }
531
532 static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
533                                    struct iwl_rx_mem_buffer *rxb,
534                                    struct ieee80211_rx_status *stats)
535 {
536         struct iwl_rx_packet *pkt = rxb_addr(rxb);
537         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
538         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
539         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
540         u16 len = le16_to_cpu(rx_hdr->len);
541         struct sk_buff *skb;
542         __le16 fc = hdr->frame_control;
543
544         /* We received data from the HW, so stop the watchdog */
545         if (unlikely(len + IWL39_RX_FRAME_SIZE >
546                      PAGE_SIZE << priv->hw_params.rx_page_order)) {
547                 IWL_DEBUG_DROP(priv, "Corruption detected!\n");
548                 return;
549         }
550
551         /* We only process data packets if the interface is open */
552         if (unlikely(!priv->is_open)) {
553                 IWL_DEBUG_DROP_LIMIT(priv,
554                         "Dropping packet while interface is not open.\n");
555                 return;
556         }
557
558         skb = dev_alloc_skb(128);
559         if (!skb) {
560                 IWL_ERR(priv, "dev_alloc_skb failed\n");
561                 return;
562         }
563
564         if (!iwl3945_mod_params.sw_crypto)
565                 iwl_set_decrypted_flag(priv,
566                                        (struct ieee80211_hdr *)rxb_addr(rxb),
567                                        le32_to_cpu(rx_end->status), stats);
568
569         skb_add_rx_frag(skb, 0, rxb->page,
570                         (void *)rx_hdr->payload - (void *)pkt, len);
571
572         iwl_update_stats(priv, false, fc, len);
573         memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
574
575         ieee80211_rx(priv->hw, skb);
576         priv->alloc_rxb_page--;
577         rxb->page = NULL;
578 }
579
580 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
581
582 static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
583                                 struct iwl_rx_mem_buffer *rxb)
584 {
585         struct ieee80211_hdr *header;
586         struct ieee80211_rx_status rx_status;
587         struct iwl_rx_packet *pkt = rxb_addr(rxb);
588         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
589         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
590         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
591         u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
592         u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
593         u8 network_packet;
594
595         rx_status.flag = 0;
596         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
597         rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
598                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
599         rx_status.freq =
600                 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
601                                                rx_status.band);
602
603         rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
604         if (rx_status.band == IEEE80211_BAND_5GHZ)
605                 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
606
607         rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
608                                         RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
609
610         /* set the preamble flag if appropriate */
611         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
612                 rx_status.flag |= RX_FLAG_SHORTPRE;
613
614         if ((unlikely(rx_stats->phy_count > 20))) {
615                 IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
616                                 rx_stats->phy_count);
617                 return;
618         }
619
620         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
621             || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
622                 IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
623                 return;
624         }
625
626
627
628         /* Convert 3945's rssi indicator to dBm */
629         rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
630
631         IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
632                         rx_status.signal, rx_stats_sig_avg,
633                         rx_stats_noise_diff);
634
635         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
636
637         network_packet = iwl3945_is_network_packet(priv, header);
638
639         IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
640                               network_packet ? '*' : ' ',
641                               le16_to_cpu(rx_hdr->channel),
642                               rx_status.signal, rx_status.signal,
643                               rx_status.rate_idx);
644
645         iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
646
647         if (network_packet) {
648                 priv->_3945.last_beacon_time =
649                         le32_to_cpu(rx_end->beacon_timestamp);
650                 priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
651                 priv->_3945.last_rx_rssi = rx_status.signal;
652         }
653
654         iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
655 }
656
657 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
658                                      struct iwl_tx_queue *txq,
659                                      dma_addr_t addr, u16 len, u8 reset, u8 pad)
660 {
661         int count;
662         struct iwl_queue *q;
663         struct iwl3945_tfd *tfd, *tfd_tmp;
664
665         q = &txq->q;
666         tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
667         tfd = &tfd_tmp[q->write_ptr];
668
669         if (reset)
670                 memset(tfd, 0, sizeof(*tfd));
671
672         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
673
674         if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
675                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
676                           NUM_TFD_CHUNKS);
677                 return -EINVAL;
678         }
679
680         tfd->tbs[count].addr = cpu_to_le32(addr);
681         tfd->tbs[count].len = cpu_to_le32(len);
682
683         count++;
684
685         tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
686                                          TFD_CTL_PAD_SET(pad));
687
688         return 0;
689 }
690
691 /**
692  * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
693  *
694  * Does NOT advance any indexes
695  */
696 void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
697 {
698         struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
699         int index = txq->q.read_ptr;
700         struct iwl3945_tfd *tfd = &tfd_tmp[index];
701         struct pci_dev *dev = priv->pci_dev;
702         int i;
703         int counter;
704
705         /* sanity check */
706         counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
707         if (counter > NUM_TFD_CHUNKS) {
708                 IWL_ERR(priv, "Too many chunks: %i\n", counter);
709                 /* @todo issue fatal error, it is quite serious situation */
710                 return;
711         }
712
713         /* Unmap tx_cmd */
714         if (counter)
715                 pci_unmap_single(dev,
716                                 dma_unmap_addr(&txq->meta[index], mapping),
717                                 dma_unmap_len(&txq->meta[index], len),
718                                 PCI_DMA_TODEVICE);
719
720         /* unmap chunks if any */
721
722         for (i = 1; i < counter; i++)
723                 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
724                          le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
725
726         /* free SKB */
727         if (txq->txb) {
728                 struct sk_buff *skb;
729
730                 skb = txq->txb[txq->q.read_ptr].skb;
731
732                 /* can be called from irqs-disabled context */
733                 if (skb) {
734                         dev_kfree_skb_any(skb);
735                         txq->txb[txq->q.read_ptr].skb = NULL;
736                 }
737         }
738 }
739
740 /**
741  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
742  *
743 */
744 void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
745                                   struct iwl_device_cmd *cmd,
746                                   struct ieee80211_tx_info *info,
747                                   struct ieee80211_hdr *hdr,
748                                   int sta_id, int tx_id)
749 {
750         u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
751         u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
752         u16 rate_mask;
753         int rate;
754         u8 rts_retry_limit;
755         u8 data_retry_limit;
756         __le32 tx_flags;
757         __le16 fc = hdr->frame_control;
758         struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
759
760         rate = iwl3945_rates[rate_index].plcp;
761         tx_flags = tx_cmd->tx_flags;
762
763         /* We need to figure out how to get the sta->supp_rates while
764          * in this running context */
765         rate_mask = IWL_RATES_MASK_3945;
766
767         /* Set retry limit on DATA packets and Probe Responses*/
768         if (ieee80211_is_probe_resp(fc))
769                 data_retry_limit = 3;
770         else
771                 data_retry_limit = IWL_DEFAULT_TX_RETRY;
772         tx_cmd->data_retry_limit = data_retry_limit;
773
774         if (tx_id >= IWL39_CMD_QUEUE_NUM)
775                 rts_retry_limit = 3;
776         else
777                 rts_retry_limit = 7;
778
779         if (data_retry_limit < rts_retry_limit)
780                 rts_retry_limit = data_retry_limit;
781         tx_cmd->rts_retry_limit = rts_retry_limit;
782
783         tx_cmd->rate = rate;
784         tx_cmd->tx_flags = tx_flags;
785
786         /* OFDM */
787         tx_cmd->supp_rates[0] =
788            ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
789
790         /* CCK */
791         tx_cmd->supp_rates[1] = (rate_mask & 0xF);
792
793         IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
794                        "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
795                        tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
796                        tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
797 }
798
799 static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
800 {
801         unsigned long flags_spin;
802         struct iwl_station_entry *station;
803
804         if (sta_id == IWL_INVALID_STATION)
805                 return IWL_INVALID_STATION;
806
807         spin_lock_irqsave(&priv->sta_lock, flags_spin);
808         station = &priv->stations[sta_id];
809
810         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
811         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
812         station->sta.mode = STA_CONTROL_MODIFY_MSK;
813         iwl_send_add_sta(priv, &station->sta, CMD_ASYNC);
814         spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
815
816         IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
817                         sta_id, tx_rate);
818         return sta_id;
819 }
820
821 static void iwl3945_set_pwr_vmain(struct iwl_priv *priv)
822 {
823 /*
824  * (for documentation purposes)
825  * to set power to V_AUX, do
826
827                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
828                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
829                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
830                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
831
832                         iwl_poll_bit(priv, CSR_GPIO_IN,
833                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
834                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
835                 }
836  */
837
838         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
839                         APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
840                         ~APMG_PS_CTRL_MSK_PWR_SRC);
841
842         iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
843                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);  /* uS */
844 }
845
846 static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
847 {
848         iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
849         iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
850         iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
851         iwl_write_direct32(priv, FH39_RCSR_CONFIG(0),
852                 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
853                 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
854                 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
855                 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
856                 (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
857                 FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
858                 (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
859                 FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
860
861         /* fake read to flush all prev I/O */
862         iwl_read_direct32(priv, FH39_RSSR_CTRL);
863
864         return 0;
865 }
866
867 static int iwl3945_tx_reset(struct iwl_priv *priv)
868 {
869
870         /* bypass mode */
871         iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
872
873         /* RA 0 is active */
874         iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
875
876         /* all 6 fifo are active */
877         iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
878
879         iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
880         iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
881         iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
882         iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
883
884         iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
885                              priv->_3945.shared_phys);
886
887         iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
888                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
889                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
890                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
891                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
892                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
893                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
894                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
895
896
897         return 0;
898 }
899
900 /**
901  * iwl3945_txq_ctx_reset - Reset TX queue context
902  *
903  * Destroys all DMA structures and initialize them again
904  */
905 static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
906 {
907         int rc;
908         int txq_id, slots_num;
909
910         iwl3945_hw_txq_ctx_free(priv);
911
912         /* allocate tx queue structure */
913         rc = iwl_alloc_txq_mem(priv);
914         if (rc)
915                 return rc;
916
917         /* Tx CMD queue */
918         rc = iwl3945_tx_reset(priv);
919         if (rc)
920                 goto error;
921
922         /* Tx queue(s) */
923         for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
924                 slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ?
925                                 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
926                 rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
927                                        txq_id);
928                 if (rc) {
929                         IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
930                         goto error;
931                 }
932         }
933
934         return rc;
935
936  error:
937         iwl3945_hw_txq_ctx_free(priv);
938         return rc;
939 }
940
941
942 /*
943  * Start up 3945's basic functionality after it has been reset
944  * (e.g. after platform boot, or shutdown via iwl_apm_stop())
945  * NOTE:  This does not load uCode nor start the embedded processor
946  */
947 static int iwl3945_apm_init(struct iwl_priv *priv)
948 {
949         int ret = iwl_apm_init(priv);
950
951         /* Clear APMG (NIC's internal power management) interrupts */
952         iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
953         iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
954
955         /* Reset radio chip */
956         iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
957         udelay(5);
958         iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
959
960         return ret;
961 }
962
963 static void iwl3945_nic_config(struct iwl_priv *priv)
964 {
965         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
966         unsigned long flags;
967         u8 rev_id = 0;
968
969         spin_lock_irqsave(&priv->lock, flags);
970
971         /* Determine HW type */
972         pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
973
974         IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
975
976         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
977                 IWL_DEBUG_INFO(priv, "RTP type\n");
978         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
979                 IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
980                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
981                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
982         } else {
983                 IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
984                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
985                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
986         }
987
988         if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
989                 IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
990                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
991                             CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
992         } else
993                 IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
994
995         if ((eeprom->board_revision & 0xF0) == 0xD0) {
996                 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
997                                eeprom->board_revision);
998                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
999                             CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1000         } else {
1001                 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
1002                                eeprom->board_revision);
1003                 iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
1004                               CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1005         }
1006
1007         if (eeprom->almgor_m_version <= 1) {
1008                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1009                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
1010                 IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
1011                                eeprom->almgor_m_version);
1012         } else {
1013                 IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
1014                                eeprom->almgor_m_version);
1015                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1016                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
1017         }
1018         spin_unlock_irqrestore(&priv->lock, flags);
1019
1020         if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
1021                 IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
1022
1023         if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
1024                 IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
1025 }
1026
1027 int iwl3945_hw_nic_init(struct iwl_priv *priv)
1028 {
1029         int rc;
1030         unsigned long flags;
1031         struct iwl_rx_queue *rxq = &priv->rxq;
1032
1033         spin_lock_irqsave(&priv->lock, flags);
1034         priv->cfg->ops->lib->apm_ops.init(priv);
1035         spin_unlock_irqrestore(&priv->lock, flags);
1036
1037         iwl3945_set_pwr_vmain(priv);
1038
1039         priv->cfg->ops->lib->apm_ops.config(priv);
1040
1041         /* Allocate the RX queue, or reset if it is already allocated */
1042         if (!rxq->bd) {
1043                 rc = iwl_rx_queue_alloc(priv);
1044                 if (rc) {
1045                         IWL_ERR(priv, "Unable to initialize Rx queue\n");
1046                         return -ENOMEM;
1047                 }
1048         } else
1049                 iwl3945_rx_queue_reset(priv, rxq);
1050
1051         iwl3945_rx_replenish(priv);
1052
1053         iwl3945_rx_init(priv, rxq);
1054
1055
1056         /* Look at using this instead:
1057         rxq->need_update = 1;
1058         iwl_rx_queue_update_write_ptr(priv, rxq);
1059         */
1060
1061         iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
1062
1063         rc = iwl3945_txq_ctx_reset(priv);
1064         if (rc)
1065                 return rc;
1066
1067         set_bit(STATUS_INIT, &priv->status);
1068
1069         return 0;
1070 }
1071
1072 /**
1073  * iwl3945_hw_txq_ctx_free - Free TXQ Context
1074  *
1075  * Destroy all TX DMA queues and structures
1076  */
1077 void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
1078 {
1079         int txq_id;
1080
1081         /* Tx queues */
1082         if (priv->txq)
1083                 for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
1084                      txq_id++)
1085                         if (txq_id == IWL39_CMD_QUEUE_NUM)
1086                                 iwl_cmd_queue_free(priv);
1087                         else
1088                                 iwl_tx_queue_free(priv, txq_id);
1089
1090         /* free tx queue structure */
1091         iwl_free_txq_mem(priv);
1092 }
1093
1094 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
1095 {
1096         int txq_id;
1097
1098         /* stop SCD */
1099         iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
1100         iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
1101
1102         /* reset TFD queues */
1103         for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
1104                 iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
1105                 iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
1106                                 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1107                                 1000);
1108         }
1109
1110         iwl3945_hw_txq_ctx_free(priv);
1111 }
1112
1113 /**
1114  * iwl3945_hw_reg_adjust_power_by_temp
1115  * return index delta into power gain settings table
1116 */
1117 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1118 {
1119         return (new_reading - old_reading) * (-11) / 100;
1120 }
1121
1122 /**
1123  * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1124  */
1125 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1126 {
1127         return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1128 }
1129
1130 int iwl3945_hw_get_temperature(struct iwl_priv *priv)
1131 {
1132         return iwl_read32(priv, CSR_UCODE_DRV_GP2);
1133 }
1134
1135 /**
1136  * iwl3945_hw_reg_txpower_get_temperature
1137  * get the current temperature by reading from NIC
1138 */
1139 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
1140 {
1141         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1142         int temperature;
1143
1144         temperature = iwl3945_hw_get_temperature(priv);
1145
1146         /* driver's okay range is -260 to +25.
1147          *   human readable okay range is 0 to +285 */
1148         IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1149
1150         /* handle insane temp reading */
1151         if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1152                 IWL_ERR(priv, "Error bad temperature value  %d\n", temperature);
1153
1154                 /* if really really hot(?),
1155                  *   substitute the 3rd band/group's temp measured at factory */
1156                 if (priv->last_temperature > 100)
1157                         temperature = eeprom->groups[2].temperature;
1158                 else /* else use most recent "sane" value from driver */
1159                         temperature = priv->last_temperature;
1160         }
1161
1162         return temperature;     /* raw, not "human readable" */
1163 }
1164
1165 /* Adjust Txpower only if temperature variance is greater than threshold.
1166  *
1167  * Both are lower than older versions' 9 degrees */
1168 #define IWL_TEMPERATURE_LIMIT_TIMER   6
1169
1170 /**
1171  * is_temp_calib_needed - determines if new calibration is needed
1172  *
1173  * records new temperature in tx_mgr->temperature.
1174  * replaces tx_mgr->last_temperature *only* if calib needed
1175  *    (assumes caller will actually do the calibration!). */
1176 static int is_temp_calib_needed(struct iwl_priv *priv)
1177 {
1178         int temp_diff;
1179
1180         priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1181         temp_diff = priv->temperature - priv->last_temperature;
1182
1183         /* get absolute value */
1184         if (temp_diff < 0) {
1185                 IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
1186                 temp_diff = -temp_diff;
1187         } else if (temp_diff == 0)
1188                 IWL_DEBUG_POWER(priv, "Same temp,\n");
1189         else
1190                 IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
1191
1192         /* if we don't need calibration, *don't* update last_temperature */
1193         if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1194                 IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
1195                 return 0;
1196         }
1197
1198         IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
1199
1200         /* assume that caller will actually do calib ...
1201          *   update the "last temperature" value */
1202         priv->last_temperature = priv->temperature;
1203         return 1;
1204 }
1205
1206 #define IWL_MAX_GAIN_ENTRIES 78
1207 #define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
1208 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1209
1210 /* radio and DSP power table, each step is 1/2 dB.
1211  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1212 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1213         {
1214          {251, 127},            /* 2.4 GHz, highest power */
1215          {251, 127},
1216          {251, 127},
1217          {251, 127},
1218          {251, 125},
1219          {251, 110},
1220          {251, 105},
1221          {251, 98},
1222          {187, 125},
1223          {187, 115},
1224          {187, 108},
1225          {187, 99},
1226          {243, 119},
1227          {243, 111},
1228          {243, 105},
1229          {243, 97},
1230          {243, 92},
1231          {211, 106},
1232          {211, 100},
1233          {179, 120},
1234          {179, 113},
1235          {179, 107},
1236          {147, 125},
1237          {147, 119},
1238          {147, 112},
1239          {147, 106},
1240          {147, 101},
1241          {147, 97},
1242          {147, 91},
1243          {115, 107},
1244          {235, 121},
1245          {235, 115},
1246          {235, 109},
1247          {203, 127},
1248          {203, 121},
1249          {203, 115},
1250          {203, 108},
1251          {203, 102},
1252          {203, 96},
1253          {203, 92},
1254          {171, 110},
1255          {171, 104},
1256          {171, 98},
1257          {139, 116},
1258          {227, 125},
1259          {227, 119},
1260          {227, 113},
1261          {227, 107},
1262          {227, 101},
1263          {227, 96},
1264          {195, 113},
1265          {195, 106},
1266          {195, 102},
1267          {195, 95},
1268          {163, 113},
1269          {163, 106},
1270          {163, 102},
1271          {163, 95},
1272          {131, 113},
1273          {131, 106},
1274          {131, 102},
1275          {131, 95},
1276          {99, 113},
1277          {99, 106},
1278          {99, 102},
1279          {99, 95},
1280          {67, 113},
1281          {67, 106},
1282          {67, 102},
1283          {67, 95},
1284          {35, 113},
1285          {35, 106},
1286          {35, 102},
1287          {35, 95},
1288          {3, 113},
1289          {3, 106},
1290          {3, 102},
1291          {3, 95} },             /* 2.4 GHz, lowest power */
1292         {
1293          {251, 127},            /* 5.x GHz, highest power */
1294          {251, 120},
1295          {251, 114},
1296          {219, 119},
1297          {219, 101},
1298          {187, 113},
1299          {187, 102},
1300          {155, 114},
1301          {155, 103},
1302          {123, 117},
1303          {123, 107},
1304          {123, 99},
1305          {123, 92},
1306          {91, 108},
1307          {59, 125},
1308          {59, 118},
1309          {59, 109},
1310          {59, 102},
1311          {59, 96},
1312          {59, 90},
1313          {27, 104},
1314          {27, 98},
1315          {27, 92},
1316          {115, 118},
1317          {115, 111},
1318          {115, 104},
1319          {83, 126},
1320          {83, 121},
1321          {83, 113},
1322          {83, 105},
1323          {83, 99},
1324          {51, 118},
1325          {51, 111},
1326          {51, 104},
1327          {51, 98},
1328          {19, 116},
1329          {19, 109},
1330          {19, 102},
1331          {19, 98},
1332          {19, 93},
1333          {171, 113},
1334          {171, 107},
1335          {171, 99},
1336          {139, 120},
1337          {139, 113},
1338          {139, 107},
1339          {139, 99},
1340          {107, 120},
1341          {107, 113},
1342          {107, 107},
1343          {107, 99},
1344          {75, 120},
1345          {75, 113},
1346          {75, 107},
1347          {75, 99},
1348          {43, 120},
1349          {43, 113},
1350          {43, 107},
1351          {43, 99},
1352          {11, 120},
1353          {11, 113},
1354          {11, 107},
1355          {11, 99},
1356          {131, 107},
1357          {131, 99},
1358          {99, 120},
1359          {99, 113},
1360          {99, 107},
1361          {99, 99},
1362          {67, 120},
1363          {67, 113},
1364          {67, 107},
1365          {67, 99},
1366          {35, 120},
1367          {35, 113},
1368          {35, 107},
1369          {35, 99},
1370          {3, 120} }             /* 5.x GHz, lowest power */
1371 };
1372
1373 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1374 {
1375         if (index < 0)
1376                 return 0;
1377         if (index >= IWL_MAX_GAIN_ENTRIES)
1378                 return IWL_MAX_GAIN_ENTRIES - 1;
1379         return (u8) index;
1380 }
1381
1382 /* Kick off thermal recalibration check every 60 seconds */
1383 #define REG_RECALIB_PERIOD (60)
1384
1385 /**
1386  * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1387  *
1388  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1389  * or 6 Mbit (OFDM) rates.
1390  */
1391 static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
1392                                s32 rate_index, const s8 *clip_pwrs,
1393                                struct iwl_channel_info *ch_info,
1394                                int band_index)
1395 {
1396         struct iwl3945_scan_power_info *scan_power_info;
1397         s8 power;
1398         u8 power_index;
1399
1400         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1401
1402         /* use this channel group's 6Mbit clipping/saturation pwr,
1403          *   but cap at regulatory scan power restriction (set during init
1404          *   based on eeprom channel data) for this channel.  */
1405         power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1406
1407         /* further limit to user's max power preference.
1408          * FIXME:  Other spectrum management power limitations do not
1409          *   seem to apply?? */
1410         power = min(power, priv->tx_power_user_lmt);
1411         scan_power_info->requested_power = power;
1412
1413         /* find difference between new scan *power* and current "normal"
1414          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1415          *   current "normal" temperature-compensated Tx power *index* for
1416          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1417          *   *index*. */
1418         power_index = ch_info->power_info[rate_index].power_table_index
1419             - (power - ch_info->power_info
1420                [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1421
1422         /* store reference index that we use when adjusting *all* scan
1423          *   powers.  So we can accommodate user (all channel) or spectrum
1424          *   management (single channel) power changes "between" temperature
1425          *   feedback compensation procedures.
1426          * don't force fit this reference index into gain table; it may be a
1427          *   negative number.  This will help avoid errors when we're at
1428          *   the lower bounds (highest gains, for warmest temperatures)
1429          *   of the table. */
1430
1431         /* don't exceed table bounds for "real" setting */
1432         power_index = iwl3945_hw_reg_fix_power_index(power_index);
1433
1434         scan_power_info->power_table_index = power_index;
1435         scan_power_info->tpc.tx_gain =
1436             power_gain_table[band_index][power_index].tx_gain;
1437         scan_power_info->tpc.dsp_atten =
1438             power_gain_table[band_index][power_index].dsp_atten;
1439 }
1440
1441 /**
1442  * iwl3945_send_tx_power - fill in Tx Power command with gain settings
1443  *
1444  * Configures power settings for all rates for the current channel,
1445  * using values from channel info struct, and send to NIC
1446  */
1447 static int iwl3945_send_tx_power(struct iwl_priv *priv)
1448 {
1449         int rate_idx, i;
1450         const struct iwl_channel_info *ch_info = NULL;
1451         struct iwl3945_txpowertable_cmd txpower = {
1452                 .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel,
1453         };
1454         u16 chan;
1455
1456         if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
1457                       "TX Power requested while scanning!\n"))
1458                 return -EAGAIN;
1459
1460         chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
1461
1462         txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1463         ch_info = iwl_get_channel_info(priv, priv->band, chan);
1464         if (!ch_info) {
1465                 IWL_ERR(priv,
1466                         "Failed to get channel info for channel %d [%d]\n",
1467                         chan, priv->band);
1468                 return -EINVAL;
1469         }
1470
1471         if (!is_channel_valid(ch_info)) {
1472                 IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
1473                                 "non-Tx channel.\n");
1474                 return 0;
1475         }
1476
1477         /* fill cmd with power settings for all rates for current channel */
1478         /* Fill OFDM rate */
1479         for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1480              rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
1481
1482                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1483                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1484
1485                 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1486                                 le16_to_cpu(txpower.channel),
1487                                 txpower.band,
1488                                 txpower.power[i].tpc.tx_gain,
1489                                 txpower.power[i].tpc.dsp_atten,
1490                                 txpower.power[i].rate);
1491         }
1492         /* Fill CCK rates */
1493         for (rate_idx = IWL_FIRST_CCK_RATE;
1494              rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1495                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1496                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1497
1498                 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1499                                 le16_to_cpu(txpower.channel),
1500                                 txpower.band,
1501                                 txpower.power[i].tpc.tx_gain,
1502                                 txpower.power[i].tpc.dsp_atten,
1503                                 txpower.power[i].rate);
1504         }
1505
1506         return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1507                                 sizeof(struct iwl3945_txpowertable_cmd),
1508                                 &txpower);
1509
1510 }
1511
1512 /**
1513  * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1514  * @ch_info: Channel to update.  Uses power_info.requested_power.
1515  *
1516  * Replace requested_power and base_power_index ch_info fields for
1517  * one channel.
1518  *
1519  * Called if user or spectrum management changes power preferences.
1520  * Takes into account h/w and modulation limitations (clip power).
1521  *
1522  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1523  *
1524  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1525  *       properly fill out the scan powers, and actual h/w gain settings,
1526  *       and send changes to NIC
1527  */
1528 static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
1529                              struct iwl_channel_info *ch_info)
1530 {
1531         struct iwl3945_channel_power_info *power_info;
1532         int power_changed = 0;
1533         int i;
1534         const s8 *clip_pwrs;
1535         int power;
1536
1537         /* Get this chnlgrp's rate-to-max/clip-powers table */
1538         clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1539
1540         /* Get this channel's rate-to-current-power settings table */
1541         power_info = ch_info->power_info;
1542
1543         /* update OFDM Txpower settings */
1544         for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1545              i++, ++power_info) {
1546                 int delta_idx;
1547
1548                 /* limit new power to be no more than h/w capability */
1549                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1550                 if (power == power_info->requested_power)
1551                         continue;
1552
1553                 /* find difference between old and new requested powers,
1554                  *    update base (non-temp-compensated) power index */
1555                 delta_idx = (power - power_info->requested_power) * 2;
1556                 power_info->base_power_index -= delta_idx;
1557
1558                 /* save new requested power value */
1559                 power_info->requested_power = power;
1560
1561                 power_changed = 1;
1562         }
1563
1564         /* update CCK Txpower settings, based on OFDM 12M setting ...
1565          *    ... all CCK power settings for a given channel are the *same*. */
1566         if (power_changed) {
1567                 power =
1568                     ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1569                     requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1570
1571                 /* do all CCK rates' iwl3945_channel_power_info structures */
1572                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1573                         power_info->requested_power = power;
1574                         power_info->base_power_index =
1575                             ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1576                             base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1577                         ++power_info;
1578                 }
1579         }
1580
1581         return 0;
1582 }
1583
1584 /**
1585  * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1586  *
1587  * NOTE: Returned power limit may be less (but not more) than requested,
1588  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1589  *       (no consideration for h/w clipping limitations).
1590  */
1591 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
1592 {
1593         s8 max_power;
1594
1595 #if 0
1596         /* if we're using TGd limits, use lower of TGd or EEPROM */
1597         if (ch_info->tgd_data.max_power != 0)
1598                 max_power = min(ch_info->tgd_data.max_power,
1599                                 ch_info->eeprom.max_power_avg);
1600
1601         /* else just use EEPROM limits */
1602         else
1603 #endif
1604                 max_power = ch_info->eeprom.max_power_avg;
1605
1606         return min(max_power, ch_info->max_power_avg);
1607 }
1608
1609 /**
1610  * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1611  *
1612  * Compensate txpower settings of *all* channels for temperature.
1613  * This only accounts for the difference between current temperature
1614  *   and the factory calibration temperatures, and bases the new settings
1615  *   on the channel's base_power_index.
1616  *
1617  * If RxOn is "associated", this sends the new Txpower to NIC!
1618  */
1619 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
1620 {
1621         struct iwl_channel_info *ch_info = NULL;
1622         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1623         int delta_index;
1624         const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1625         u8 a_band;
1626         u8 rate_index;
1627         u8 scan_tbl_index;
1628         u8 i;
1629         int ref_temp;
1630         int temperature = priv->temperature;
1631
1632         if (priv->disable_tx_power_cal ||
1633             test_bit(STATUS_SCANNING, &priv->status)) {
1634                 /* do not perform tx power calibration */
1635                 return 0;
1636         }
1637         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1638         for (i = 0; i < priv->channel_count; i++) {
1639                 ch_info = &priv->channel_info[i];
1640                 a_band = is_channel_a_band(ch_info);
1641
1642                 /* Get this chnlgrp's factory calibration temperature */
1643                 ref_temp = (s16)eeprom->groups[ch_info->group_index].
1644                     temperature;
1645
1646                 /* get power index adjustment based on current and factory
1647                  * temps */
1648                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1649                                                               ref_temp);
1650
1651                 /* set tx power value for all rates, OFDM and CCK */
1652                 for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945;
1653                      rate_index++) {
1654                         int power_idx =
1655                             ch_info->power_info[rate_index].base_power_index;
1656
1657                         /* temperature compensate */
1658                         power_idx += delta_index;
1659
1660                         /* stay within table range */
1661                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1662                         ch_info->power_info[rate_index].
1663                             power_table_index = (u8) power_idx;
1664                         ch_info->power_info[rate_index].tpc =
1665                             power_gain_table[a_band][power_idx];
1666                 }
1667
1668                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1669                 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1670
1671                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1672                 for (scan_tbl_index = 0;
1673                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1674                         s32 actual_index = (scan_tbl_index == 0) ?
1675                             IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1676                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1677                                            actual_index, clip_pwrs,
1678                                            ch_info, a_band);
1679                 }
1680         }
1681
1682         /* send Txpower command for current channel to ucode */
1683         return priv->cfg->ops->lib->send_tx_power(priv);
1684 }
1685
1686 int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
1687 {
1688         struct iwl_channel_info *ch_info;
1689         s8 max_power;
1690         u8 a_band;
1691         u8 i;
1692
1693         if (priv->tx_power_user_lmt == power) {
1694                 IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
1695                                 "limit: %ddBm.\n", power);
1696                 return 0;
1697         }
1698
1699         IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
1700         priv->tx_power_user_lmt = power;
1701
1702         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1703
1704         for (i = 0; i < priv->channel_count; i++) {
1705                 ch_info = &priv->channel_info[i];
1706                 a_band = is_channel_a_band(ch_info);
1707
1708                 /* find minimum power of all user and regulatory constraints
1709                  *    (does not consider h/w clipping limitations) */
1710                 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1711                 max_power = min(power, max_power);
1712                 if (max_power != ch_info->curr_txpow) {
1713                         ch_info->curr_txpow = max_power;
1714
1715                         /* this considers the h/w clipping limitations */
1716                         iwl3945_hw_reg_set_new_power(priv, ch_info);
1717                 }
1718         }
1719
1720         /* update txpower settings for all channels,
1721          *   send to NIC if associated. */
1722         is_temp_calib_needed(priv);
1723         iwl3945_hw_reg_comp_txpower_temp(priv);
1724
1725         return 0;
1726 }
1727
1728 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv,
1729                                    struct iwl_rxon_context *ctx)
1730 {
1731         int rc = 0;
1732         struct iwl_rx_packet *pkt;
1733         struct iwl3945_rxon_assoc_cmd rxon_assoc;
1734         struct iwl_host_cmd cmd = {
1735                 .id = REPLY_RXON_ASSOC,
1736                 .len = sizeof(rxon_assoc),
1737                 .flags = CMD_WANT_SKB,
1738                 .data = &rxon_assoc,
1739         };
1740         const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
1741         const struct iwl_rxon_cmd *rxon2 = &ctx->active;
1742
1743         if ((rxon1->flags == rxon2->flags) &&
1744             (rxon1->filter_flags == rxon2->filter_flags) &&
1745             (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1746             (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1747                 IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
1748                 return 0;
1749         }
1750
1751         rxon_assoc.flags = ctx->staging.flags;
1752         rxon_assoc.filter_flags = ctx->staging.filter_flags;
1753         rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
1754         rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
1755         rxon_assoc.reserved = 0;
1756
1757         rc = iwl_send_cmd_sync(priv, &cmd);
1758         if (rc)
1759                 return rc;
1760
1761         pkt = (struct iwl_rx_packet *)cmd.reply_page;
1762         if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
1763                 IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
1764                 rc = -EIO;
1765         }
1766
1767         iwl_free_pages(priv, cmd.reply_page);
1768
1769         return rc;
1770 }
1771
1772 /**
1773  * iwl3945_commit_rxon - commit staging_rxon to hardware
1774  *
1775  * The RXON command in staging_rxon is committed to the hardware and
1776  * the active_rxon structure is updated with the new data.  This
1777  * function correctly transitions out of the RXON_ASSOC_MSK state if
1778  * a HW tune is required based on the RXON structure changes.
1779  */
1780 int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
1781 {
1782         /* cast away the const for active_rxon in this function */
1783         struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active;
1784         struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
1785         int rc = 0;
1786         bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
1787
1788         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1789                 return -EINVAL;
1790
1791         if (!iwl_is_alive(priv))
1792                 return -1;
1793
1794         /* always get timestamp with Rx frame */
1795         staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1796
1797         /* select antenna */
1798         staging_rxon->flags &=
1799             ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1800         staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
1801
1802         rc = iwl_check_rxon_cmd(priv, ctx);
1803         if (rc) {
1804                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
1805                 return -EINVAL;
1806         }
1807
1808         /* If we don't need to send a full RXON, we can use
1809          * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1810          * and other flags for the current radio configuration. */
1811         if (!iwl_full_rxon_required(priv, &priv->contexts[IWL_RXON_CTX_BSS])) {
1812                 rc = iwl_send_rxon_assoc(priv,
1813                                          &priv->contexts[IWL_RXON_CTX_BSS]);
1814                 if (rc) {
1815                         IWL_ERR(priv, "Error setting RXON_ASSOC "
1816                                   "configuration (%d).\n", rc);
1817                         return rc;
1818                 }
1819
1820                 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1821
1822                 return 0;
1823         }
1824
1825         /* If we are currently associated and the new config requires
1826          * an RXON_ASSOC and the new config wants the associated mask enabled,
1827          * we must clear the associated from the active configuration
1828          * before we apply the new config */
1829         if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) {
1830                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
1831                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1832
1833                 /*
1834                  * reserved4 and 5 could have been filled by the iwlcore code.
1835                  * Let's clear them before pushing to the 3945.
1836                  */
1837                 active_rxon->reserved4 = 0;
1838                 active_rxon->reserved5 = 0;
1839                 rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
1840                                       sizeof(struct iwl3945_rxon_cmd),
1841                                       &priv->contexts[IWL_RXON_CTX_BSS].active);
1842
1843                 /* If the mask clearing failed then we set
1844                  * active_rxon back to what it was previously */
1845                 if (rc) {
1846                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1847                         IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
1848                                   "configuration (%d).\n", rc);
1849                         return rc;
1850                 }
1851                 iwl_clear_ucode_stations(priv,
1852                                          &priv->contexts[IWL_RXON_CTX_BSS]);
1853                 iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
1854         }
1855
1856         IWL_DEBUG_INFO(priv, "Sending RXON\n"
1857                        "* with%s RXON_FILTER_ASSOC_MSK\n"
1858                        "* channel = %d\n"
1859                        "* bssid = %pM\n",
1860                        (new_assoc ? "" : "out"),
1861                        le16_to_cpu(staging_rxon->channel),
1862                        staging_rxon->bssid_addr);
1863
1864         /*
1865          * reserved4 and 5 could have been filled by the iwlcore code.
1866          * Let's clear them before pushing to the 3945.
1867          */
1868         staging_rxon->reserved4 = 0;
1869         staging_rxon->reserved5 = 0;
1870
1871         iwl_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto);
1872
1873         /* Apply the new configuration */
1874         rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
1875                               sizeof(struct iwl3945_rxon_cmd),
1876                               staging_rxon);
1877         if (rc) {
1878                 IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
1879                 return rc;
1880         }
1881
1882         memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1883
1884         if (!new_assoc) {
1885                 iwl_clear_ucode_stations(priv,
1886                                          &priv->contexts[IWL_RXON_CTX_BSS]);
1887                 iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
1888         }
1889
1890         /* If we issue a new RXON command which required a tune then we must
1891          * send a new TXPOWER command or we won't be able to Tx any frames */
1892         rc = iwl_set_tx_power(priv, priv->tx_power_next, true);
1893         if (rc) {
1894                 IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
1895                 return rc;
1896         }
1897
1898         /* Init the hardware's rate fallback order based on the band */
1899         rc = iwl3945_init_hw_rate_table(priv);
1900         if (rc) {
1901                 IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
1902                 return -EIO;
1903         }
1904
1905         return 0;
1906 }
1907
1908 /**
1909  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
1910  *
1911  * -- reset periodic timer
1912  * -- see if temp has changed enough to warrant re-calibration ... if so:
1913  *     -- correct coeffs for temp (can reset temp timer)
1914  *     -- save this temp as "last",
1915  *     -- send new set of gain settings to NIC
1916  * NOTE:  This should continue working, even when we're not associated,
1917  *   so we can keep our internal table of scan powers current. */
1918 void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
1919 {
1920         /* This will kick in the "brute force"
1921          * iwl3945_hw_reg_comp_txpower_temp() below */
1922         if (!is_temp_calib_needed(priv))
1923                 goto reschedule;
1924
1925         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1926          * This is based *only* on current temperature,
1927          * ignoring any previous power measurements */
1928         iwl3945_hw_reg_comp_txpower_temp(priv);
1929
1930  reschedule:
1931         queue_delayed_work(priv->workqueue,
1932                            &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
1933 }
1934
1935 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1936 {
1937         struct iwl_priv *priv = container_of(work, struct iwl_priv,
1938                                              _3945.thermal_periodic.work);
1939
1940         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1941                 return;
1942
1943         mutex_lock(&priv->mutex);
1944         iwl3945_reg_txpower_periodic(priv);
1945         mutex_unlock(&priv->mutex);
1946 }
1947
1948 /**
1949  * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1950  *                                 for the channel.
1951  *
1952  * This function is used when initializing channel-info structs.
1953  *
1954  * NOTE: These channel groups do *NOT* match the bands above!
1955  *       These channel groups are based on factory-tested channels;
1956  *       on A-band, EEPROM's "group frequency" entries represent the top
1957  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
1958  */
1959 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
1960                                        const struct iwl_channel_info *ch_info)
1961 {
1962         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1963         struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1964         u8 group;
1965         u16 group_index = 0;    /* based on factory calib frequencies */
1966         u8 grp_channel;
1967
1968         /* Find the group index for the channel ... don't use index 1(?) */
1969         if (is_channel_a_band(ch_info)) {
1970                 for (group = 1; group < 5; group++) {
1971                         grp_channel = ch_grp[group].group_channel;
1972                         if (ch_info->channel <= grp_channel) {
1973                                 group_index = group;
1974                                 break;
1975                         }
1976                 }
1977                 /* group 4 has a few channels *above* its factory cal freq */
1978                 if (group == 5)
1979                         group_index = 4;
1980         } else
1981                 group_index = 0;        /* 2.4 GHz, group 0 */
1982
1983         IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
1984                         group_index);
1985         return group_index;
1986 }
1987
1988 /**
1989  * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
1990  *
1991  * Interpolate to get nominal (i.e. at factory calibration temperature) index
1992  *   into radio/DSP gain settings table for requested power.
1993  */
1994 static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
1995                                        s8 requested_power,
1996                                        s32 setting_index, s32 *new_index)
1997 {
1998         const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
1999         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2000         s32 index0, index1;
2001         s32 power = 2 * requested_power;
2002         s32 i;
2003         const struct iwl3945_eeprom_txpower_sample *samples;
2004         s32 gains0, gains1;
2005         s32 res;
2006         s32 denominator;
2007
2008         chnl_grp = &eeprom->groups[setting_index];
2009         samples = chnl_grp->samples;
2010         for (i = 0; i < 5; i++) {
2011                 if (power == samples[i].power) {
2012                         *new_index = samples[i].gain_index;
2013                         return 0;
2014                 }
2015         }
2016
2017         if (power > samples[1].power) {
2018                 index0 = 0;
2019                 index1 = 1;
2020         } else if (power > samples[2].power) {
2021                 index0 = 1;
2022                 index1 = 2;
2023         } else if (power > samples[3].power) {
2024                 index0 = 2;
2025                 index1 = 3;
2026         } else {
2027                 index0 = 3;
2028                 index1 = 4;
2029         }
2030
2031         denominator = (s32) samples[index1].power - (s32) samples[index0].power;
2032         if (denominator == 0)
2033                 return -EINVAL;
2034         gains0 = (s32) samples[index0].gain_index * (1 << 19);
2035         gains1 = (s32) samples[index1].gain_index * (1 << 19);
2036         res = gains0 + (gains1 - gains0) *
2037             ((s32) power - (s32) samples[index0].power) / denominator +
2038             (1 << 18);
2039         *new_index = res >> 19;
2040         return 0;
2041 }
2042
2043 static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
2044 {
2045         u32 i;
2046         s32 rate_index;
2047         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2048         const struct iwl3945_eeprom_txpower_group *group;
2049
2050         IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
2051
2052         for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
2053                 s8 *clip_pwrs;  /* table of power levels for each rate */
2054                 s8 satur_pwr;   /* saturation power for each chnl group */
2055                 group = &eeprom->groups[i];
2056
2057                 /* sanity check on factory saturation power value */
2058                 if (group->saturation_power < 40) {
2059                         IWL_WARN(priv, "Error: saturation power is %d, "
2060                                     "less than minimum expected 40\n",
2061                                     group->saturation_power);
2062                         return;
2063                 }
2064
2065                 /*
2066                  * Derive requested power levels for each rate, based on
2067                  *   hardware capabilities (saturation power for band).
2068                  * Basic value is 3dB down from saturation, with further
2069                  *   power reductions for highest 3 data rates.  These
2070                  *   backoffs provide headroom for high rate modulation
2071                  *   power peaks, without too much distortion (clipping).
2072                  */
2073                 /* we'll fill in this array with h/w max power levels */
2074                 clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
2075
2076                 /* divide factory saturation power by 2 to find -3dB level */
2077                 satur_pwr = (s8) (group->saturation_power >> 1);
2078
2079                 /* fill in channel group's nominal powers for each rate */
2080                 for (rate_index = 0;
2081                      rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
2082                         switch (rate_index) {
2083                         case IWL_RATE_36M_INDEX_TABLE:
2084                                 if (i == 0)     /* B/G */
2085                                         *clip_pwrs = satur_pwr;
2086                                 else    /* A */
2087                                         *clip_pwrs = satur_pwr - 5;
2088                                 break;
2089                         case IWL_RATE_48M_INDEX_TABLE:
2090                                 if (i == 0)
2091                                         *clip_pwrs = satur_pwr - 7;
2092                                 else
2093                                         *clip_pwrs = satur_pwr - 10;
2094                                 break;
2095                         case IWL_RATE_54M_INDEX_TABLE:
2096                                 if (i == 0)
2097                                         *clip_pwrs = satur_pwr - 9;
2098                                 else
2099                                         *clip_pwrs = satur_pwr - 12;
2100                                 break;
2101                         default:
2102                                 *clip_pwrs = satur_pwr;
2103                                 break;
2104                         }
2105                 }
2106         }
2107 }
2108
2109 /**
2110  * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2111  *
2112  * Second pass (during init) to set up priv->channel_info
2113  *
2114  * Set up Tx-power settings in our channel info database for each VALID
2115  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2116  * and current temperature.
2117  *
2118  * Since this is based on current temperature (at init time), these values may
2119  * not be valid for very long, but it gives us a starting/default point,
2120  * and allows us to active (i.e. using Tx) scan.
2121  *
2122  * This does *not* write values to NIC, just sets up our internal table.
2123  */
2124 int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
2125 {
2126         struct iwl_channel_info *ch_info = NULL;
2127         struct iwl3945_channel_power_info *pwr_info;
2128         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2129         int delta_index;
2130         u8 rate_index;
2131         u8 scan_tbl_index;
2132         const s8 *clip_pwrs;    /* array of power levels for each rate */
2133         u8 gain, dsp_atten;
2134         s8 power;
2135         u8 pwr_index, base_pwr_index, a_band;
2136         u8 i;
2137         int temperature;
2138
2139         /* save temperature reference,
2140          *   so we can determine next time to calibrate */
2141         temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2142         priv->last_temperature = temperature;
2143
2144         iwl3945_hw_reg_init_channel_groups(priv);
2145
2146         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2147         for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2148              i++, ch_info++) {
2149                 a_band = is_channel_a_band(ch_info);
2150                 if (!is_channel_valid(ch_info))
2151                         continue;
2152
2153                 /* find this channel's channel group (*not* "band") index */
2154                 ch_info->group_index =
2155                         iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2156
2157                 /* Get this chnlgrp's rate->max/clip-powers table */
2158                 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
2159
2160                 /* calculate power index *adjustment* value according to
2161                  *  diff between current temperature and factory temperature */
2162                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2163                                 eeprom->groups[ch_info->group_index].
2164                                 temperature);
2165
2166                 IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
2167                                 ch_info->channel, delta_index, temperature +
2168                                 IWL_TEMP_CONVERT);
2169
2170                 /* set tx power value for all OFDM rates */
2171                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2172                      rate_index++) {
2173                         s32 uninitialized_var(power_idx);
2174                         int rc;
2175
2176                         /* use channel group's clip-power table,
2177                          *   but don't exceed channel's max power */
2178                         s8 pwr = min(ch_info->max_power_avg,
2179                                      clip_pwrs[rate_index]);
2180
2181                         pwr_info = &ch_info->power_info[rate_index];
2182
2183                         /* get base (i.e. at factory-measured temperature)
2184                          *    power table index for this rate's power */
2185                         rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2186                                                          ch_info->group_index,
2187                                                          &power_idx);
2188                         if (rc) {
2189                                 IWL_ERR(priv, "Invalid power index\n");
2190                                 return rc;
2191                         }
2192                         pwr_info->base_power_index = (u8) power_idx;
2193
2194                         /* temperature compensate */
2195                         power_idx += delta_index;
2196
2197                         /* stay within range of gain table */
2198                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2199
2200                         /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2201                         pwr_info->requested_power = pwr;
2202                         pwr_info->power_table_index = (u8) power_idx;
2203                         pwr_info->tpc.tx_gain =
2204                             power_gain_table[a_band][power_idx].tx_gain;
2205                         pwr_info->tpc.dsp_atten =
2206                             power_gain_table[a_band][power_idx].dsp_atten;
2207                 }
2208
2209                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2210                 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2211                 power = pwr_info->requested_power +
2212                         IWL_CCK_FROM_OFDM_POWER_DIFF;
2213                 pwr_index = pwr_info->power_table_index +
2214                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2215                 base_pwr_index = pwr_info->base_power_index +
2216                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2217
2218                 /* stay within table range */
2219                 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2220                 gain = power_gain_table[a_band][pwr_index].tx_gain;
2221                 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2222
2223                 /* fill each CCK rate's iwl3945_channel_power_info structure
2224                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2225                  * NOTE:  CCK rates start at end of OFDM rates! */
2226                 for (rate_index = 0;
2227                      rate_index < IWL_CCK_RATES; rate_index++) {
2228                         pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2229                         pwr_info->requested_power = power;
2230                         pwr_info->power_table_index = pwr_index;
2231                         pwr_info->base_power_index = base_pwr_index;
2232                         pwr_info->tpc.tx_gain = gain;
2233                         pwr_info->tpc.dsp_atten = dsp_atten;
2234                 }
2235
2236                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2237                 for (scan_tbl_index = 0;
2238                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2239                         s32 actual_index = (scan_tbl_index == 0) ?
2240                                 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2241                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2242                                 actual_index, clip_pwrs, ch_info, a_band);
2243                 }
2244         }
2245
2246         return 0;
2247 }
2248
2249 int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
2250 {
2251         int rc;
2252
2253         iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
2254         rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
2255                         FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2256         if (rc < 0)
2257                 IWL_ERR(priv, "Can't stop Rx DMA.\n");
2258
2259         return 0;
2260 }
2261
2262 int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
2263 {
2264         int txq_id = txq->q.id;
2265
2266         struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
2267
2268         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2269
2270         iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
2271         iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
2272
2273         iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
2274                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2275                 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2276                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2277                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2278                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2279
2280         /* fake read to flush all prev. writes */
2281         iwl_read32(priv, FH39_TSSR_CBB_BASE);
2282
2283         return 0;
2284 }
2285
2286 /*
2287  * HCMD utils
2288  */
2289 static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
2290 {
2291         switch (cmd_id) {
2292         case REPLY_RXON:
2293                 return sizeof(struct iwl3945_rxon_cmd);
2294         case POWER_TABLE_CMD:
2295                 return sizeof(struct iwl3945_powertable_cmd);
2296         default:
2297                 return len;
2298         }
2299 }
2300
2301
2302 static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
2303 {
2304         struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
2305         addsta->mode = cmd->mode;
2306         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2307         memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
2308         addsta->station_flags = cmd->station_flags;
2309         addsta->station_flags_msk = cmd->station_flags_msk;
2310         addsta->tid_disable_tx = cpu_to_le16(0);
2311         addsta->rate_n_flags = cmd->rate_n_flags;
2312         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2313         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2314         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2315
2316         return (u16)sizeof(struct iwl3945_addsta_cmd);
2317 }
2318
2319 static int iwl3945_add_bssid_station(struct iwl_priv *priv,
2320                                      const u8 *addr, u8 *sta_id_r)
2321 {
2322         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
2323         int ret;
2324         u8 sta_id;
2325         unsigned long flags;
2326
2327         if (sta_id_r)
2328                 *sta_id_r = IWL_INVALID_STATION;
2329
2330         ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
2331         if (ret) {
2332                 IWL_ERR(priv, "Unable to add station %pM\n", addr);
2333                 return ret;
2334         }
2335
2336         if (sta_id_r)
2337                 *sta_id_r = sta_id;
2338
2339         spin_lock_irqsave(&priv->sta_lock, flags);
2340         priv->stations[sta_id].used |= IWL_STA_LOCAL;
2341         spin_unlock_irqrestore(&priv->sta_lock, flags);
2342
2343         return 0;
2344 }
2345 static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
2346                                        struct ieee80211_vif *vif, bool add)
2347 {
2348         struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2349         int ret;
2350
2351         if (add) {
2352                 ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid,
2353                                                 &vif_priv->ibss_bssid_sta_id);
2354                 if (ret)
2355                         return ret;
2356
2357                 iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
2358                                  (priv->band == IEEE80211_BAND_5GHZ) ?
2359                                  IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
2360                 iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
2361
2362                 return 0;
2363         }
2364
2365         return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
2366                                   vif->bss_conf.bssid);
2367 }
2368
2369 /**
2370  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2371  */
2372 int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
2373 {
2374         int rc, i, index, prev_index;
2375         struct iwl3945_rate_scaling_cmd rate_cmd = {
2376                 .reserved = {0, 0, 0},
2377         };
2378         struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2379
2380         for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2381                 index = iwl3945_rates[i].table_rs_index;
2382
2383                 table[index].rate_n_flags =
2384                         iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2385                 table[index].try_cnt = priv->retry_rate;
2386                 prev_index = iwl3945_get_prev_ieee_rate(i);
2387                 table[index].next_rate_index =
2388                                 iwl3945_rates[prev_index].table_rs_index;
2389         }
2390
2391         switch (priv->band) {
2392         case IEEE80211_BAND_5GHZ:
2393                 IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
2394                 /* If one of the following CCK rates is used,
2395                  * have it fall back to the 6M OFDM rate */
2396                 for (i = IWL_RATE_1M_INDEX_TABLE;
2397                         i <= IWL_RATE_11M_INDEX_TABLE; i++)
2398                         table[i].next_rate_index =
2399                           iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2400
2401                 /* Don't fall back to CCK rates */
2402                 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
2403                                                 IWL_RATE_9M_INDEX_TABLE;
2404
2405                 /* Don't drop out of OFDM rates */
2406                 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2407                     iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2408                 break;
2409
2410         case IEEE80211_BAND_2GHZ:
2411                 IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
2412                 /* If an OFDM rate is used, have it fall back to the
2413                  * 1M CCK rates */
2414
2415                 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
2416                     iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
2417
2418                         index = IWL_FIRST_CCK_RATE;
2419                         for (i = IWL_RATE_6M_INDEX_TABLE;
2420                              i <= IWL_RATE_54M_INDEX_TABLE; i++)
2421                                 table[i].next_rate_index =
2422                                         iwl3945_rates[index].table_rs_index;
2423
2424                         index = IWL_RATE_11M_INDEX_TABLE;
2425                         /* CCK shouldn't fall back to OFDM... */
2426                         table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2427                 }
2428                 break;
2429
2430         default:
2431                 WARN_ON(1);
2432                 break;
2433         }
2434
2435         /* Update the rate scaling for control frame Tx */
2436         rate_cmd.table_id = 0;
2437         rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2438                               &rate_cmd);
2439         if (rc)
2440                 return rc;
2441
2442         /* Update the rate scaling for data frame Tx */
2443         rate_cmd.table_id = 1;
2444         return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2445                                 &rate_cmd);
2446 }
2447
2448 /* Called when initializing driver */
2449 int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
2450 {
2451         memset((void *)&priv->hw_params, 0,
2452                sizeof(struct iwl_hw_params));
2453
2454         priv->_3945.shared_virt =
2455                 dma_alloc_coherent(&priv->pci_dev->dev,
2456                                    sizeof(struct iwl3945_shared),
2457                                    &priv->_3945.shared_phys, GFP_KERNEL);
2458         if (!priv->_3945.shared_virt) {
2459                 IWL_ERR(priv, "failed to allocate pci memory\n");
2460                 return -ENOMEM;
2461         }
2462
2463         /* Assign number of Usable TX queues */
2464         priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
2465
2466         priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
2467         priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
2468         priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2469         priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2470         priv->hw_params.max_stations = IWL3945_STATION_COUNT;
2471         priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID;
2472
2473         priv->sta_key_max_num = STA_KEY_MAX_NUM;
2474
2475         priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2476         priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
2477         priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
2478
2479         return 0;
2480 }
2481
2482 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
2483                           struct iwl3945_frame *frame, u8 rate)
2484 {
2485         struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2486         unsigned int frame_size;
2487
2488         tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2489         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2490
2491         tx_beacon_cmd->tx.sta_id =
2492                 priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
2493         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2494
2495         frame_size = iwl3945_fill_beacon_frame(priv,
2496                                 tx_beacon_cmd->frame,
2497                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2498
2499         BUG_ON(frame_size > MAX_MPDU_SIZE);
2500         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2501
2502         tx_beacon_cmd->tx.rate = rate;
2503         tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2504                                       TX_CMD_FLG_TSF_MSK);
2505
2506         /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2507         tx_beacon_cmd->tx.supp_rates[0] =
2508                 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2509
2510         tx_beacon_cmd->tx.supp_rates[1] =
2511                 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2512
2513         return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2514 }
2515
2516 void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
2517 {
2518         priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2519         priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2520 }
2521
2522 void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
2523 {
2524         INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
2525                           iwl3945_bg_reg_txpower_periodic);
2526 }
2527
2528 void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
2529 {
2530         cancel_delayed_work(&priv->_3945.thermal_periodic);
2531 }
2532
2533 /* check contents of special bootstrap uCode SRAM */
2534 static int iwl3945_verify_bsm(struct iwl_priv *priv)
2535  {
2536         __le32 *image = priv->ucode_boot.v_addr;
2537         u32 len = priv->ucode_boot.len;
2538         u32 reg;
2539         u32 val;
2540
2541         IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
2542
2543         /* verify BSM SRAM contents */
2544         val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
2545         for (reg = BSM_SRAM_LOWER_BOUND;
2546              reg < BSM_SRAM_LOWER_BOUND + len;
2547              reg += sizeof(u32), image++) {
2548                 val = iwl_read_prph(priv, reg);
2549                 if (val != le32_to_cpu(*image)) {
2550                         IWL_ERR(priv, "BSM uCode verification failed at "
2551                                   "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2552                                   BSM_SRAM_LOWER_BOUND,
2553                                   reg - BSM_SRAM_LOWER_BOUND, len,
2554                                   val, le32_to_cpu(*image));
2555                         return -EIO;
2556                 }
2557         }
2558
2559         IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
2560
2561         return 0;
2562 }
2563
2564
2565 /******************************************************************************
2566  *
2567  * EEPROM related functions
2568  *
2569  ******************************************************************************/
2570
2571 /*
2572  * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2573  * embedded controller) as EEPROM reader; each read is a series of pulses
2574  * to/from the EEPROM chip, not a single event, so even reads could conflict
2575  * if they weren't arbitrated by some ownership mechanism.  Here, the driver
2576  * simply claims ownership, which should be safe when this function is called
2577  * (i.e. before loading uCode!).
2578  */
2579 static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
2580 {
2581         _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2582         return 0;
2583 }
2584
2585
2586 static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
2587 {
2588         return;
2589 }
2590
2591  /**
2592   * iwl3945_load_bsm - Load bootstrap instructions
2593   *
2594   * BSM operation:
2595   *
2596   * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2597   * in special SRAM that does not power down during RFKILL.  When powering back
2598   * up after power-saving sleeps (or during initial uCode load), the BSM loads
2599   * the bootstrap program into the on-board processor, and starts it.
2600   *
2601   * The bootstrap program loads (via DMA) instructions and data for a new
2602   * program from host DRAM locations indicated by the host driver in the
2603   * BSM_DRAM_* registers.  Once the new program is loaded, it starts
2604   * automatically.
2605   *
2606   * When initializing the NIC, the host driver points the BSM to the
2607   * "initialize" uCode image.  This uCode sets up some internal data, then
2608   * notifies host via "initialize alive" that it is complete.
2609   *
2610   * The host then replaces the BSM_DRAM_* pointer values to point to the
2611   * normal runtime uCode instructions and a backup uCode data cache buffer
2612   * (filled initially with starting data values for the on-board processor),
2613   * then triggers the "initialize" uCode to load and launch the runtime uCode,
2614   * which begins normal operation.
2615   *
2616   * When doing a power-save shutdown, runtime uCode saves data SRAM into
2617   * the backup data cache in DRAM before SRAM is powered down.
2618   *
2619   * When powering back up, the BSM loads the bootstrap program.  This reloads
2620   * the runtime uCode instructions and the backup data cache into SRAM,
2621   * and re-launches the runtime uCode from where it left off.
2622   */
2623 static int iwl3945_load_bsm(struct iwl_priv *priv)
2624 {
2625         __le32 *image = priv->ucode_boot.v_addr;
2626         u32 len = priv->ucode_boot.len;
2627         dma_addr_t pinst;
2628         dma_addr_t pdata;
2629         u32 inst_len;
2630         u32 data_len;
2631         int rc;
2632         int i;
2633         u32 done;
2634         u32 reg_offset;
2635
2636         IWL_DEBUG_INFO(priv, "Begin load bsm\n");
2637
2638         /* make sure bootstrap program is no larger than BSM's SRAM size */
2639         if (len > IWL39_MAX_BSM_SIZE)
2640                 return -EINVAL;
2641
2642         /* Tell bootstrap uCode where to find the "Initialize" uCode
2643         *   in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2644         * NOTE:  iwl3945_initialize_alive_start() will replace these values,
2645         *        after the "initialize" uCode has run, to point to
2646         *        runtime/protocol instructions and backup data cache. */
2647         pinst = priv->ucode_init.p_addr;
2648         pdata = priv->ucode_init_data.p_addr;
2649         inst_len = priv->ucode_init.len;
2650         data_len = priv->ucode_init_data.len;
2651
2652         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
2653         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
2654         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2655         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2656
2657         /* Fill BSM memory with bootstrap instructions */
2658         for (reg_offset = BSM_SRAM_LOWER_BOUND;
2659              reg_offset < BSM_SRAM_LOWER_BOUND + len;
2660              reg_offset += sizeof(u32), image++)
2661                 _iwl_write_prph(priv, reg_offset,
2662                                           le32_to_cpu(*image));
2663
2664         rc = iwl3945_verify_bsm(priv);
2665         if (rc)
2666                 return rc;
2667
2668         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2669         iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
2670         iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
2671                                  IWL39_RTC_INST_LOWER_BOUND);
2672         iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2673
2674         /* Load bootstrap code into instruction SRAM now,
2675          *   to prepare to load "initialize" uCode */
2676         iwl_write_prph(priv, BSM_WR_CTRL_REG,
2677                 BSM_WR_CTRL_REG_BIT_START);
2678
2679         /* Wait for load of bootstrap uCode to finish */
2680         for (i = 0; i < 100; i++) {
2681                 done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
2682                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2683                         break;
2684                 udelay(10);
2685         }
2686         if (i < 100)
2687                 IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
2688         else {
2689                 IWL_ERR(priv, "BSM write did not complete!\n");
2690                 return -EIO;
2691         }
2692
2693         /* Enable future boot loads whenever power management unit triggers it
2694          *   (e.g. when powering back up after power-save shutdown) */
2695         iwl_write_prph(priv, BSM_WR_CTRL_REG,
2696                 BSM_WR_CTRL_REG_BIT_START_EN);
2697
2698         return 0;
2699 }
2700
2701 static struct iwl_hcmd_ops iwl3945_hcmd = {
2702         .rxon_assoc = iwl3945_send_rxon_assoc,
2703         .commit_rxon = iwl3945_commit_rxon,
2704         .send_bt_config = iwl_send_bt_config,
2705 };
2706
2707 static struct iwl_lib_ops iwl3945_lib = {
2708         .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
2709         .txq_free_tfd = iwl3945_hw_txq_free_tfd,
2710         .txq_init = iwl3945_hw_tx_queue_init,
2711         .load_ucode = iwl3945_load_bsm,
2712         .dump_nic_event_log = iwl3945_dump_nic_event_log,
2713         .dump_nic_error_log = iwl3945_dump_nic_error_log,
2714         .apm_ops = {
2715                 .init = iwl3945_apm_init,
2716                 .config = iwl3945_nic_config,
2717         },
2718         .eeprom_ops = {
2719                 .regulatory_bands = {
2720                         EEPROM_REGULATORY_BAND_1_CHANNELS,
2721                         EEPROM_REGULATORY_BAND_2_CHANNELS,
2722                         EEPROM_REGULATORY_BAND_3_CHANNELS,
2723                         EEPROM_REGULATORY_BAND_4_CHANNELS,
2724                         EEPROM_REGULATORY_BAND_5_CHANNELS,
2725                         EEPROM_REGULATORY_BAND_NO_HT40,
2726                         EEPROM_REGULATORY_BAND_NO_HT40,
2727                 },
2728                 .acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
2729                 .release_semaphore = iwl3945_eeprom_release_semaphore,
2730                 .query_addr = iwlcore_eeprom_query_addr,
2731         },
2732         .send_tx_power  = iwl3945_send_tx_power,
2733         .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
2734         .isr_ops = {
2735                 .isr = iwl_isr_legacy,
2736         },
2737
2738         .debugfs_ops = {
2739                 .rx_stats_read = iwl3945_ucode_rx_stats_read,
2740                 .tx_stats_read = iwl3945_ucode_tx_stats_read,
2741                 .general_stats_read = iwl3945_ucode_general_stats_read,
2742         },
2743 };
2744
2745 static const struct iwl_legacy_ops iwl3945_legacy_ops = {
2746         .post_associate = iwl3945_post_associate,
2747         .config_ap = iwl3945_config_ap,
2748         .manage_ibss_station = iwl3945_manage_ibss_station,
2749 };
2750
2751 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
2752         .get_hcmd_size = iwl3945_get_hcmd_size,
2753         .build_addsta_hcmd = iwl3945_build_addsta_hcmd,
2754         .tx_cmd_protection = iwl_legacy_tx_cmd_protection,
2755         .request_scan = iwl3945_request_scan,
2756         .post_scan = iwl3945_post_scan,
2757 };
2758
2759 static const struct iwl_ops iwl3945_ops = {
2760         .lib = &iwl3945_lib,
2761         .hcmd = &iwl3945_hcmd,
2762         .utils = &iwl3945_hcmd_utils,
2763         .led = &iwl3945_led_ops,
2764         .legacy = &iwl3945_legacy_ops,
2765         .ieee80211_ops = &iwl3945_hw_ops,
2766 };
2767
2768 static struct iwl_base_params iwl3945_base_params = {
2769         .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
2770         .num_of_queues = IWL39_NUM_QUEUES,
2771         .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2772         .set_l0s = false,
2773         .use_bsm = true,
2774         .use_isr_legacy = true,
2775         .led_compensation = 64,
2776         .broken_powersave = true,
2777         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
2778         .wd_timeout = IWL_DEF_WD_TIMEOUT,
2779         .max_event_log_size = 512,
2780         .tx_power_by_driver = true,
2781 };
2782
2783 static struct iwl_cfg iwl3945_bg_cfg = {
2784         .name = "3945BG",
2785         .fw_name_pre = IWL3945_FW_PRE,
2786         .ucode_api_max = IWL3945_UCODE_API_MAX,
2787         .ucode_api_min = IWL3945_UCODE_API_MIN,
2788         .sku = IWL_SKU_G,
2789         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2790         .ops = &iwl3945_ops,
2791         .mod_params = &iwl3945_mod_params,
2792         .base_params = &iwl3945_base_params,
2793         .led_mode = IWL_LED_BLINK,
2794 };
2795
2796 static struct iwl_cfg iwl3945_abg_cfg = {
2797         .name = "3945ABG",
2798         .fw_name_pre = IWL3945_FW_PRE,
2799         .ucode_api_max = IWL3945_UCODE_API_MAX,
2800         .ucode_api_min = IWL3945_UCODE_API_MIN,
2801         .sku = IWL_SKU_A|IWL_SKU_G,
2802         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2803         .ops = &iwl3945_ops,
2804         .mod_params = &iwl3945_mod_params,
2805         .base_params = &iwl3945_base_params,
2806         .led_mode = IWL_LED_BLINK,
2807 };
2808
2809 DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
2810         {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2811         {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2812         {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2813         {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2814         {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2815         {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2816         {0}
2817 };
2818
2819 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);