drivers/net: Convert unbounded kzalloc calls to kcalloc
[linux-2.6.git] / drivers / net / vxge / vxge-main.c
1 /******************************************************************************
2 * This software may be used and distributed according to the terms of
3 * the GNU General Public License (GPL), incorporated herein by reference.
4 * Drivers based on or derived from this code fall under the GPL and must
5 * retain the authorship, copyright and license notice.  This file is not
6 * a complete program and may only be used when the entire operating
7 * system is licensed under the GPL.
8 * See the file COPYING in this distribution for more information.
9 *
10 * vxge-main.c: Driver for Exar Corp's X3100 Series 10GbE PCIe I/O
11 *              Virtualized Server Adapter.
12 * Copyright(c) 2002-2010 Exar Corp.
13 *
14 * The module loadable parameters that are supported by the driver and a brief
15 * explanation of all the variables:
16 * vlan_tag_strip:
17 *       Strip VLAN Tag enable/disable. Instructs the device to remove
18 *       the VLAN tag from all received tagged frames that are not
19 *       replicated at the internal L2 switch.
20 *               0 - Do not strip the VLAN tag.
21 *               1 - Strip the VLAN tag.
22 *
23 * addr_learn_en:
24 *       Enable learning the mac address of the guest OS interface in
25 *       a virtualization environment.
26 *               0 - DISABLE
27 *               1 - ENABLE
28 *
29 * max_config_port:
30 *       Maximum number of port to be supported.
31 *               MIN -1 and MAX - 2
32 *
33 * max_config_vpath:
34 *       This configures the maximum no of VPATH configures for each
35 *       device function.
36 *               MIN - 1 and MAX - 17
37 *
38 * max_config_dev:
39 *       This configures maximum no of Device function to be enabled.
40 *               MIN - 1 and MAX - 17
41 *
42 ******************************************************************************/
43
44 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
45
46 #include <linux/if_vlan.h>
47 #include <linux/pci.h>
48 #include <linux/slab.h>
49 #include <linux/tcp.h>
50 #include <net/ip.h>
51 #include <linux/netdevice.h>
52 #include <linux/etherdevice.h>
53 #include "vxge-main.h"
54 #include "vxge-reg.h"
55
56 MODULE_LICENSE("Dual BSD/GPL");
57 MODULE_DESCRIPTION("Neterion's X3100 Series 10GbE PCIe I/O"
58         "Virtualized Server Adapter");
59
60 static DEFINE_PCI_DEVICE_TABLE(vxge_id_table) = {
61         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_WIN, PCI_ANY_ID,
62         PCI_ANY_ID},
63         {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_TITAN_UNI, PCI_ANY_ID,
64         PCI_ANY_ID},
65         {0}
66 };
67
68 MODULE_DEVICE_TABLE(pci, vxge_id_table);
69
70 VXGE_MODULE_PARAM_INT(vlan_tag_strip, VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE);
71 VXGE_MODULE_PARAM_INT(addr_learn_en, VXGE_HW_MAC_ADDR_LEARN_DEFAULT);
72 VXGE_MODULE_PARAM_INT(max_config_port, VXGE_MAX_CONFIG_PORT);
73 VXGE_MODULE_PARAM_INT(max_config_vpath, VXGE_USE_DEFAULT);
74 VXGE_MODULE_PARAM_INT(max_mac_vpath, VXGE_MAX_MAC_ADDR_COUNT);
75 VXGE_MODULE_PARAM_INT(max_config_dev, VXGE_MAX_CONFIG_DEV);
76
77 static u16 vpath_selector[VXGE_HW_MAX_VIRTUAL_PATHS] =
78                 {0, 1, 3, 3, 7, 7, 7, 7, 15, 15, 15, 15, 15, 15, 15, 15, 31};
79 static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] =
80         {[0 ...(VXGE_HW_MAX_VIRTUAL_PATHS - 1)] = 0xFF};
81 module_param_array(bw_percentage, uint, NULL, 0);
82
83 static struct vxge_drv_config *driver_config;
84
85 static inline int is_vxge_card_up(struct vxgedev *vdev)
86 {
87         return test_bit(__VXGE_STATE_CARD_UP, &vdev->state);
88 }
89
90 static inline void VXGE_COMPLETE_VPATH_TX(struct vxge_fifo *fifo)
91 {
92         struct sk_buff **skb_ptr = NULL;
93         struct sk_buff **temp;
94 #define NR_SKB_COMPLETED 128
95         struct sk_buff *completed[NR_SKB_COMPLETED];
96         int more;
97
98         do {
99                 more = 0;
100                 skb_ptr = completed;
101
102                 if (__netif_tx_trylock(fifo->txq)) {
103                         vxge_hw_vpath_poll_tx(fifo->handle, &skb_ptr,
104                                                 NR_SKB_COMPLETED, &more);
105                         __netif_tx_unlock(fifo->txq);
106                 }
107
108                 /* free SKBs */
109                 for (temp = completed; temp != skb_ptr; temp++)
110                         dev_kfree_skb_irq(*temp);
111         } while (more);
112 }
113
114 static inline void VXGE_COMPLETE_ALL_TX(struct vxgedev *vdev)
115 {
116         int i;
117
118         /* Complete all transmits */
119         for (i = 0; i < vdev->no_of_vpath; i++)
120                 VXGE_COMPLETE_VPATH_TX(&vdev->vpaths[i].fifo);
121 }
122
123 static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev)
124 {
125         int i;
126         struct vxge_ring *ring;
127
128         /* Complete all receives*/
129         for (i = 0; i < vdev->no_of_vpath; i++) {
130                 ring = &vdev->vpaths[i].ring;
131                 vxge_hw_vpath_poll_rx(ring->handle);
132         }
133 }
134
135 /*
136  * vxge_callback_link_up
137  *
138  * This function is called during interrupt context to notify link up state
139  * change.
140  */
141 void
142 vxge_callback_link_up(struct __vxge_hw_device *hldev)
143 {
144         struct net_device *dev = hldev->ndev;
145         struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
146
147         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
148                 vdev->ndev->name, __func__, __LINE__);
149         netdev_notice(vdev->ndev, "Link Up\n");
150         vdev->stats.link_up++;
151
152         netif_carrier_on(vdev->ndev);
153         netif_tx_wake_all_queues(vdev->ndev);
154
155         vxge_debug_entryexit(VXGE_TRACE,
156                 "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
157 }
158
159 /*
160  * vxge_callback_link_down
161  *
162  * This function is called during interrupt context to notify link down state
163  * change.
164  */
165 void
166 vxge_callback_link_down(struct __vxge_hw_device *hldev)
167 {
168         struct net_device *dev = hldev->ndev;
169         struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
170
171         vxge_debug_entryexit(VXGE_TRACE,
172                 "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
173         netdev_notice(vdev->ndev, "Link Down\n");
174
175         vdev->stats.link_down++;
176         netif_carrier_off(vdev->ndev);
177         netif_tx_stop_all_queues(vdev->ndev);
178
179         vxge_debug_entryexit(VXGE_TRACE,
180                 "%s: %s:%d Exiting...", vdev->ndev->name, __func__, __LINE__);
181 }
182
183 /*
184  * vxge_rx_alloc
185  *
186  * Allocate SKB.
187  */
188 static struct sk_buff*
189 vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size)
190 {
191         struct net_device    *dev;
192         struct sk_buff       *skb;
193         struct vxge_rx_priv *rx_priv;
194
195         dev = ring->ndev;
196         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
197                 ring->ndev->name, __func__, __LINE__);
198
199         rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
200
201         /* try to allocate skb first. this one may fail */
202         skb = netdev_alloc_skb(dev, skb_size +
203         VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
204         if (skb == NULL) {
205                 vxge_debug_mem(VXGE_ERR,
206                         "%s: out of memory to allocate SKB", dev->name);
207                 ring->stats.skb_alloc_fail++;
208                 return NULL;
209         }
210
211         vxge_debug_mem(VXGE_TRACE,
212                 "%s: %s:%d  Skb : 0x%p", ring->ndev->name,
213                 __func__, __LINE__, skb);
214
215         skb_reserve(skb, VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
216
217         rx_priv->skb = skb;
218         rx_priv->skb_data = NULL;
219         rx_priv->data_size = skb_size;
220         vxge_debug_entryexit(VXGE_TRACE,
221                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
222
223         return skb;
224 }
225
226 /*
227  * vxge_rx_map
228  */
229 static int vxge_rx_map(void *dtrh, struct vxge_ring *ring)
230 {
231         struct vxge_rx_priv *rx_priv;
232         dma_addr_t dma_addr;
233
234         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
235                 ring->ndev->name, __func__, __LINE__);
236         rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
237
238         rx_priv->skb_data = rx_priv->skb->data;
239         dma_addr = pci_map_single(ring->pdev, rx_priv->skb_data,
240                                 rx_priv->data_size, PCI_DMA_FROMDEVICE);
241
242         if (unlikely(pci_dma_mapping_error(ring->pdev, dma_addr))) {
243                 ring->stats.pci_map_fail++;
244                 return -EIO;
245         }
246         vxge_debug_mem(VXGE_TRACE,
247                 "%s: %s:%d  1 buffer mode dma_addr = 0x%llx",
248                 ring->ndev->name, __func__, __LINE__,
249                 (unsigned long long)dma_addr);
250         vxge_hw_ring_rxd_1b_set(dtrh, dma_addr, rx_priv->data_size);
251
252         rx_priv->data_dma = dma_addr;
253         vxge_debug_entryexit(VXGE_TRACE,
254                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
255
256         return 0;
257 }
258
259 /*
260  * vxge_rx_initial_replenish
261  * Allocation of RxD as an initial replenish procedure.
262  */
263 static enum vxge_hw_status
264 vxge_rx_initial_replenish(void *dtrh, void *userdata)
265 {
266         struct vxge_ring *ring = (struct vxge_ring *)userdata;
267         struct vxge_rx_priv *rx_priv;
268
269         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
270                 ring->ndev->name, __func__, __LINE__);
271         if (vxge_rx_alloc(dtrh, ring,
272                           VXGE_LL_MAX_FRAME_SIZE(ring->ndev)) == NULL)
273                 return VXGE_HW_FAIL;
274
275         if (vxge_rx_map(dtrh, ring)) {
276                 rx_priv = vxge_hw_ring_rxd_private_get(dtrh);
277                 dev_kfree_skb(rx_priv->skb);
278
279                 return VXGE_HW_FAIL;
280         }
281         vxge_debug_entryexit(VXGE_TRACE,
282                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
283
284         return VXGE_HW_OK;
285 }
286
287 static inline void
288 vxge_rx_complete(struct vxge_ring *ring, struct sk_buff *skb, u16 vlan,
289                  int pkt_length, struct vxge_hw_ring_rxd_info *ext_info)
290 {
291
292         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
293                         ring->ndev->name, __func__, __LINE__);
294         skb_record_rx_queue(skb, ring->driver_id);
295         skb->protocol = eth_type_trans(skb, ring->ndev);
296
297         ring->stats.rx_frms++;
298         ring->stats.rx_bytes += pkt_length;
299
300         if (skb->pkt_type == PACKET_MULTICAST)
301                 ring->stats.rx_mcast++;
302
303         vxge_debug_rx(VXGE_TRACE,
304                 "%s: %s:%d  skb protocol = %d",
305                 ring->ndev->name, __func__, __LINE__, skb->protocol);
306
307         if (ring->gro_enable) {
308                 if (ring->vlgrp && ext_info->vlan &&
309                         (ring->vlan_tag_strip ==
310                                 VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
311                         vlan_gro_receive(ring->napi_p, ring->vlgrp,
312                                         ext_info->vlan, skb);
313                 else
314                         napi_gro_receive(ring->napi_p, skb);
315         } else {
316                 if (ring->vlgrp && vlan &&
317                         (ring->vlan_tag_strip ==
318                                 VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE))
319                         vlan_hwaccel_receive_skb(skb, ring->vlgrp, vlan);
320                 else
321                         netif_receive_skb(skb);
322         }
323         vxge_debug_entryexit(VXGE_TRACE,
324                 "%s: %s:%d Exiting...", ring->ndev->name, __func__, __LINE__);
325 }
326
327 static inline void vxge_re_pre_post(void *dtr, struct vxge_ring *ring,
328                                     struct vxge_rx_priv *rx_priv)
329 {
330         pci_dma_sync_single_for_device(ring->pdev,
331                 rx_priv->data_dma, rx_priv->data_size, PCI_DMA_FROMDEVICE);
332
333         vxge_hw_ring_rxd_1b_set(dtr, rx_priv->data_dma, rx_priv->data_size);
334         vxge_hw_ring_rxd_pre_post(ring->handle, dtr);
335 }
336
337 static inline void vxge_post(int *dtr_cnt, void **first_dtr,
338                              void *post_dtr, struct __vxge_hw_ring *ringh)
339 {
340         int dtr_count = *dtr_cnt;
341         if ((*dtr_cnt % VXGE_HW_RXSYNC_FREQ_CNT) == 0) {
342                 if (*first_dtr)
343                         vxge_hw_ring_rxd_post_post_wmb(ringh, *first_dtr);
344                 *first_dtr = post_dtr;
345         } else
346                 vxge_hw_ring_rxd_post_post(ringh, post_dtr);
347         dtr_count++;
348         *dtr_cnt = dtr_count;
349 }
350
351 /*
352  * vxge_rx_1b_compl
353  *
354  * If the interrupt is because of a received frame or if the receive ring
355  * contains fresh as yet un-processed frames, this function is called.
356  */
357 enum vxge_hw_status
358 vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
359                  u8 t_code, void *userdata)
360 {
361         struct vxge_ring *ring = (struct vxge_ring *)userdata;
362         struct  net_device *dev = ring->ndev;
363         unsigned int dma_sizes;
364         void *first_dtr = NULL;
365         int dtr_cnt = 0;
366         int data_size;
367         dma_addr_t data_dma;
368         int pkt_length;
369         struct sk_buff *skb;
370         struct vxge_rx_priv *rx_priv;
371         struct vxge_hw_ring_rxd_info ext_info;
372         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
373                 ring->ndev->name, __func__, __LINE__);
374         ring->pkts_processed = 0;
375
376         vxge_hw_ring_replenish(ringh);
377
378         do {
379                 prefetch((char *)dtr + L1_CACHE_BYTES);
380                 rx_priv = vxge_hw_ring_rxd_private_get(dtr);
381                 skb = rx_priv->skb;
382                 data_size = rx_priv->data_size;
383                 data_dma = rx_priv->data_dma;
384                 prefetch(rx_priv->skb_data);
385
386                 vxge_debug_rx(VXGE_TRACE,
387                         "%s: %s:%d  skb = 0x%p",
388                         ring->ndev->name, __func__, __LINE__, skb);
389
390                 vxge_hw_ring_rxd_1b_get(ringh, dtr, &dma_sizes);
391                 pkt_length = dma_sizes;
392
393                 pkt_length -= ETH_FCS_LEN;
394
395                 vxge_debug_rx(VXGE_TRACE,
396                         "%s: %s:%d  Packet Length = %d",
397                         ring->ndev->name, __func__, __LINE__, pkt_length);
398
399                 vxge_hw_ring_rxd_1b_info_get(ringh, dtr, &ext_info);
400
401                 /* check skb validity */
402                 vxge_assert(skb);
403
404                 prefetch((char *)skb + L1_CACHE_BYTES);
405                 if (unlikely(t_code)) {
406
407                         if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) !=
408                                 VXGE_HW_OK) {
409
410                                 ring->stats.rx_errors++;
411                                 vxge_debug_rx(VXGE_TRACE,
412                                         "%s: %s :%d Rx T_code is %d",
413                                         ring->ndev->name, __func__,
414                                         __LINE__, t_code);
415
416                                 /* If the t_code is not supported and if the
417                                  * t_code is other than 0x5 (unparseable packet
418                                  * such as unknown UPV6 header), Drop it !!!
419                                  */
420                                 vxge_re_pre_post(dtr, ring, rx_priv);
421
422                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
423                                 ring->stats.rx_dropped++;
424                                 continue;
425                         }
426                 }
427
428                 if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) {
429
430                         if (vxge_rx_alloc(dtr, ring, data_size) != NULL) {
431
432                                 if (!vxge_rx_map(dtr, ring)) {
433                                         skb_put(skb, pkt_length);
434
435                                         pci_unmap_single(ring->pdev, data_dma,
436                                                 data_size, PCI_DMA_FROMDEVICE);
437
438                                         vxge_hw_ring_rxd_pre_post(ringh, dtr);
439                                         vxge_post(&dtr_cnt, &first_dtr, dtr,
440                                                 ringh);
441                                 } else {
442                                         dev_kfree_skb(rx_priv->skb);
443                                         rx_priv->skb = skb;
444                                         rx_priv->data_size = data_size;
445                                         vxge_re_pre_post(dtr, ring, rx_priv);
446
447                                         vxge_post(&dtr_cnt, &first_dtr, dtr,
448                                                 ringh);
449                                         ring->stats.rx_dropped++;
450                                         break;
451                                 }
452                         } else {
453                                 vxge_re_pre_post(dtr, ring, rx_priv);
454
455                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
456                                 ring->stats.rx_dropped++;
457                                 break;
458                         }
459                 } else {
460                         struct sk_buff *skb_up;
461
462                         skb_up = netdev_alloc_skb(dev, pkt_length +
463                                 VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
464                         if (skb_up != NULL) {
465                                 skb_reserve(skb_up,
466                                     VXGE_HW_HEADER_ETHERNET_II_802_3_ALIGN);
467
468                                 pci_dma_sync_single_for_cpu(ring->pdev,
469                                         data_dma, data_size,
470                                         PCI_DMA_FROMDEVICE);
471
472                                 vxge_debug_mem(VXGE_TRACE,
473                                         "%s: %s:%d  skb_up = %p",
474                                         ring->ndev->name, __func__,
475                                         __LINE__, skb);
476                                 memcpy(skb_up->data, skb->data, pkt_length);
477
478                                 vxge_re_pre_post(dtr, ring, rx_priv);
479
480                                 vxge_post(&dtr_cnt, &first_dtr, dtr,
481                                         ringh);
482                                 /* will netif_rx small SKB instead */
483                                 skb = skb_up;
484                                 skb_put(skb, pkt_length);
485                         } else {
486                                 vxge_re_pre_post(dtr, ring, rx_priv);
487
488                                 vxge_post(&dtr_cnt, &first_dtr, dtr, ringh);
489                                 vxge_debug_rx(VXGE_ERR,
490                                         "%s: vxge_rx_1b_compl: out of "
491                                         "memory", dev->name);
492                                 ring->stats.skb_alloc_fail++;
493                                 break;
494                         }
495                 }
496
497                 if ((ext_info.proto & VXGE_HW_FRAME_PROTO_TCP_OR_UDP) &&
498                     !(ext_info.proto & VXGE_HW_FRAME_PROTO_IP_FRAG) &&
499                     ring->rx_csum && /* Offload Rx side CSUM */
500                     ext_info.l3_cksum == VXGE_HW_L3_CKSUM_OK &&
501                     ext_info.l4_cksum == VXGE_HW_L4_CKSUM_OK)
502                         skb->ip_summed = CHECKSUM_UNNECESSARY;
503                 else
504                         skb->ip_summed = CHECKSUM_NONE;
505
506                 vxge_rx_complete(ring, skb, ext_info.vlan,
507                         pkt_length, &ext_info);
508
509                 ring->budget--;
510                 ring->pkts_processed++;
511                 if (!ring->budget)
512                         break;
513
514         } while (vxge_hw_ring_rxd_next_completed(ringh, &dtr,
515                 &t_code) == VXGE_HW_OK);
516
517         if (first_dtr)
518                 vxge_hw_ring_rxd_post_post_wmb(ringh, first_dtr);
519
520         vxge_debug_entryexit(VXGE_TRACE,
521                                 "%s:%d  Exiting...",
522                                 __func__, __LINE__);
523         return VXGE_HW_OK;
524 }
525
526 /*
527  * vxge_xmit_compl
528  *
529  * If an interrupt was raised to indicate DMA complete of the Tx packet,
530  * this function is called. It identifies the last TxD whose buffer was
531  * freed and frees all skbs whose data have already DMA'ed into the NICs
532  * internal memory.
533  */
534 enum vxge_hw_status
535 vxge_xmit_compl(struct __vxge_hw_fifo *fifo_hw, void *dtr,
536                 enum vxge_hw_fifo_tcode t_code, void *userdata,
537                 struct sk_buff ***skb_ptr, int nr_skb, int *more)
538 {
539         struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
540         struct sk_buff *skb, **done_skb = *skb_ptr;
541         int pkt_cnt = 0;
542
543         vxge_debug_entryexit(VXGE_TRACE,
544                 "%s:%d Entered....", __func__, __LINE__);
545
546         do {
547                 int frg_cnt;
548                 skb_frag_t *frag;
549                 int i = 0, j;
550                 struct vxge_tx_priv *txd_priv =
551                         vxge_hw_fifo_txdl_private_get(dtr);
552
553                 skb = txd_priv->skb;
554                 frg_cnt = skb_shinfo(skb)->nr_frags;
555                 frag = &skb_shinfo(skb)->frags[0];
556
557                 vxge_debug_tx(VXGE_TRACE,
558                                 "%s: %s:%d fifo_hw = %p dtr = %p "
559                                 "tcode = 0x%x", fifo->ndev->name, __func__,
560                                 __LINE__, fifo_hw, dtr, t_code);
561                 /* check skb validity */
562                 vxge_assert(skb);
563                 vxge_debug_tx(VXGE_TRACE,
564                         "%s: %s:%d skb = %p itxd_priv = %p frg_cnt = %d",
565                         fifo->ndev->name, __func__, __LINE__,
566                         skb, txd_priv, frg_cnt);
567                 if (unlikely(t_code)) {
568                         fifo->stats.tx_errors++;
569                         vxge_debug_tx(VXGE_ERR,
570                                 "%s: tx: dtr %p completed due to "
571                                 "error t_code %01x", fifo->ndev->name,
572                                 dtr, t_code);
573                         vxge_hw_fifo_handle_tcode(fifo_hw, dtr, t_code);
574                 }
575
576                 /*  for unfragmented skb */
577                 pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
578                                 skb_headlen(skb), PCI_DMA_TODEVICE);
579
580                 for (j = 0; j < frg_cnt; j++) {
581                         pci_unmap_page(fifo->pdev,
582                                         txd_priv->dma_buffers[i++],
583                                         frag->size, PCI_DMA_TODEVICE);
584                         frag += 1;
585                 }
586
587                 vxge_hw_fifo_txdl_free(fifo_hw, dtr);
588
589                 /* Updating the statistics block */
590                 fifo->stats.tx_frms++;
591                 fifo->stats.tx_bytes += skb->len;
592
593                 *done_skb++ = skb;
594
595                 if (--nr_skb <= 0) {
596                         *more = 1;
597                         break;
598                 }
599
600                 pkt_cnt++;
601                 if (pkt_cnt > fifo->indicate_max_pkts)
602                         break;
603
604         } while (vxge_hw_fifo_txdl_next_completed(fifo_hw,
605                                 &dtr, &t_code) == VXGE_HW_OK);
606
607         *skb_ptr = done_skb;
608         if (netif_tx_queue_stopped(fifo->txq))
609                 netif_tx_wake_queue(fifo->txq);
610
611         vxge_debug_entryexit(VXGE_TRACE,
612                                 "%s: %s:%d  Exiting...",
613                                 fifo->ndev->name, __func__, __LINE__);
614         return VXGE_HW_OK;
615 }
616
617 /* select a vpath to transmit the packet */
618 static u32 vxge_get_vpath_no(struct vxgedev *vdev, struct sk_buff *skb)
619 {
620         u16 queue_len, counter = 0;
621         if (skb->protocol == htons(ETH_P_IP)) {
622                 struct iphdr *ip;
623                 struct tcphdr *th;
624
625                 ip = ip_hdr(skb);
626
627                 if ((ip->frag_off & htons(IP_OFFSET|IP_MF)) == 0) {
628                         th = (struct tcphdr *)(((unsigned char *)ip) +
629                                         ip->ihl*4);
630
631                         queue_len = vdev->no_of_vpath;
632                         counter = (ntohs(th->source) +
633                                 ntohs(th->dest)) &
634                                 vdev->vpath_selector[queue_len - 1];
635                         if (counter >= queue_len)
636                                 counter = queue_len - 1;
637                 }
638         }
639         return counter;
640 }
641
642 static enum vxge_hw_status vxge_search_mac_addr_in_list(
643         struct vxge_vpath *vpath, u64 del_mac)
644 {
645         struct list_head *entry, *next;
646         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
647                 if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac)
648                         return TRUE;
649         }
650         return FALSE;
651 }
652
653 static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header)
654 {
655         struct macInfo mac_info;
656         u8 *mac_address = NULL;
657         u64 mac_addr = 0, vpath_vector = 0;
658         int vpath_idx = 0;
659         enum vxge_hw_status status = VXGE_HW_OK;
660         struct vxge_vpath *vpath = NULL;
661         struct __vxge_hw_device *hldev;
662
663         hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
664
665         mac_address = (u8 *)&mac_addr;
666         memcpy(mac_address, mac_header, ETH_ALEN);
667
668         /* Is this mac address already in the list? */
669         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
670                 vpath = &vdev->vpaths[vpath_idx];
671                 if (vxge_search_mac_addr_in_list(vpath, mac_addr))
672                         return vpath_idx;
673         }
674
675         memset(&mac_info, 0, sizeof(struct macInfo));
676         memcpy(mac_info.macaddr, mac_header, ETH_ALEN);
677
678         /* Any vpath has room to add mac address to its da table? */
679         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
680                 vpath = &vdev->vpaths[vpath_idx];
681                 if (vpath->mac_addr_cnt < vpath->max_mac_addr_cnt) {
682                         /* Add this mac address to this vpath */
683                         mac_info.vpath_no = vpath_idx;
684                         mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
685                         status = vxge_add_mac_addr(vdev, &mac_info);
686                         if (status != VXGE_HW_OK)
687                                 return -EPERM;
688                         return vpath_idx;
689                 }
690         }
691
692         mac_info.state = VXGE_LL_MAC_ADDR_IN_LIST;
693         vpath_idx = 0;
694         mac_info.vpath_no = vpath_idx;
695         /* Is the first vpath already selected as catch-basin ? */
696         vpath = &vdev->vpaths[vpath_idx];
697         if (vpath->mac_addr_cnt > vpath->max_mac_addr_cnt) {
698                 /* Add this mac address to this vpath */
699                 if (FALSE == vxge_mac_list_add(vpath, &mac_info))
700                         return -EPERM;
701                 return vpath_idx;
702         }
703
704         /* Select first vpath as catch-basin */
705         vpath_vector = vxge_mBIT(vpath->device_id);
706         status = vxge_hw_mgmt_reg_write(vpath->vdev->devh,
707                                 vxge_hw_mgmt_reg_type_mrpcim,
708                                 0,
709                                 (ulong)offsetof(
710                                         struct vxge_hw_mrpcim_reg,
711                                         rts_mgr_cbasin_cfg),
712                                 vpath_vector);
713         if (status != VXGE_HW_OK) {
714                 vxge_debug_tx(VXGE_ERR,
715                         "%s: Unable to set the vpath-%d in catch-basin mode",
716                         VXGE_DRIVER_NAME, vpath->device_id);
717                 return -EPERM;
718         }
719
720         if (FALSE == vxge_mac_list_add(vpath, &mac_info))
721                 return -EPERM;
722
723         return vpath_idx;
724 }
725
726 /**
727  * vxge_xmit
728  * @skb : the socket buffer containing the Tx data.
729  * @dev : device pointer.
730  *
731  * This function is the Tx entry point of the driver. Neterion NIC supports
732  * certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
733 */
734 static netdev_tx_t
735 vxge_xmit(struct sk_buff *skb, struct net_device *dev)
736 {
737         struct vxge_fifo *fifo = NULL;
738         void *dtr_priv;
739         void *dtr = NULL;
740         struct vxgedev *vdev = NULL;
741         enum vxge_hw_status status;
742         int frg_cnt, first_frg_len;
743         skb_frag_t *frag;
744         int i = 0, j = 0, avail;
745         u64 dma_pointer;
746         struct vxge_tx_priv *txdl_priv = NULL;
747         struct __vxge_hw_fifo *fifo_hw;
748         int offload_type;
749         int vpath_no = 0;
750
751         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
752                         dev->name, __func__, __LINE__);
753
754         /* A buffer with no data will be dropped */
755         if (unlikely(skb->len <= 0)) {
756                 vxge_debug_tx(VXGE_ERR,
757                         "%s: Buffer has no data..", dev->name);
758                 dev_kfree_skb(skb);
759                 return NETDEV_TX_OK;
760         }
761
762         vdev = (struct vxgedev *)netdev_priv(dev);
763
764         if (unlikely(!is_vxge_card_up(vdev))) {
765                 vxge_debug_tx(VXGE_ERR,
766                         "%s: vdev not initialized", dev->name);
767                 dev_kfree_skb(skb);
768                 return NETDEV_TX_OK;
769         }
770
771         if (vdev->config.addr_learn_en) {
772                 vpath_no = vxge_learn_mac(vdev, skb->data + ETH_ALEN);
773                 if (vpath_no == -EPERM) {
774                         vxge_debug_tx(VXGE_ERR,
775                                 "%s: Failed to store the mac address",
776                                 dev->name);
777                         dev_kfree_skb(skb);
778                         return NETDEV_TX_OK;
779                 }
780         }
781
782         if (vdev->config.tx_steering_type == TX_MULTIQ_STEERING)
783                 vpath_no = skb_get_queue_mapping(skb);
784         else if (vdev->config.tx_steering_type == TX_PORT_STEERING)
785                 vpath_no = vxge_get_vpath_no(vdev, skb);
786
787         vxge_debug_tx(VXGE_TRACE, "%s: vpath_no= %d", dev->name, vpath_no);
788
789         if (vpath_no >= vdev->no_of_vpath)
790                 vpath_no = 0;
791
792         fifo = &vdev->vpaths[vpath_no].fifo;
793         fifo_hw = fifo->handle;
794
795         if (netif_tx_queue_stopped(fifo->txq))
796                 return NETDEV_TX_BUSY;
797
798         avail = vxge_hw_fifo_free_txdl_count_get(fifo_hw);
799         if (avail == 0) {
800                 vxge_debug_tx(VXGE_ERR,
801                         "%s: No free TXDs available", dev->name);
802                 fifo->stats.txd_not_free++;
803                 goto _exit0;
804         }
805
806         /* Last TXD?  Stop tx queue to avoid dropping packets.  TX
807          * completion will resume the queue.
808          */
809         if (avail == 1)
810                 netif_tx_stop_queue(fifo->txq);
811
812         status = vxge_hw_fifo_txdl_reserve(fifo_hw, &dtr, &dtr_priv);
813         if (unlikely(status != VXGE_HW_OK)) {
814                 vxge_debug_tx(VXGE_ERR,
815                    "%s: Out of descriptors .", dev->name);
816                 fifo->stats.txd_out_of_desc++;
817                 goto _exit0;
818         }
819
820         vxge_debug_tx(VXGE_TRACE,
821                 "%s: %s:%d fifo_hw = %p dtr = %p dtr_priv = %p",
822                 dev->name, __func__, __LINE__,
823                 fifo_hw, dtr, dtr_priv);
824
825         if (vdev->vlgrp && vlan_tx_tag_present(skb)) {
826                 u16 vlan_tag = vlan_tx_tag_get(skb);
827                 vxge_hw_fifo_txdl_vlan_set(dtr, vlan_tag);
828         }
829
830         first_frg_len = skb_headlen(skb);
831
832         dma_pointer = pci_map_single(fifo->pdev, skb->data, first_frg_len,
833                                 PCI_DMA_TODEVICE);
834
835         if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer))) {
836                 vxge_hw_fifo_txdl_free(fifo_hw, dtr);
837                 fifo->stats.pci_map_fail++;
838                 goto _exit0;
839         }
840
841         txdl_priv = vxge_hw_fifo_txdl_private_get(dtr);
842         txdl_priv->skb = skb;
843         txdl_priv->dma_buffers[j] = dma_pointer;
844
845         frg_cnt = skb_shinfo(skb)->nr_frags;
846         vxge_debug_tx(VXGE_TRACE,
847                         "%s: %s:%d skb = %p txdl_priv = %p "
848                         "frag_cnt = %d dma_pointer = 0x%llx", dev->name,
849                         __func__, __LINE__, skb, txdl_priv,
850                         frg_cnt, (unsigned long long)dma_pointer);
851
852         vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
853                 first_frg_len);
854
855         frag = &skb_shinfo(skb)->frags[0];
856         for (i = 0; i < frg_cnt; i++) {
857                 /* ignore 0 length fragment */
858                 if (!frag->size)
859                         continue;
860
861                 dma_pointer = (u64) pci_map_page(fifo->pdev, frag->page,
862                                 frag->page_offset, frag->size,
863                                 PCI_DMA_TODEVICE);
864
865                 if (unlikely(pci_dma_mapping_error(fifo->pdev, dma_pointer)))
866                         goto _exit2;
867                 vxge_debug_tx(VXGE_TRACE,
868                         "%s: %s:%d frag = %d dma_pointer = 0x%llx",
869                                 dev->name, __func__, __LINE__, i,
870                                 (unsigned long long)dma_pointer);
871
872                 txdl_priv->dma_buffers[j] = dma_pointer;
873                 vxge_hw_fifo_txdl_buffer_set(fifo_hw, dtr, j++, dma_pointer,
874                                         frag->size);
875                 frag += 1;
876         }
877
878         offload_type = vxge_offload_type(skb);
879
880         if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
881                 int mss = vxge_tcp_mss(skb);
882                 if (mss) {
883                         vxge_debug_tx(VXGE_TRACE, "%s: %s:%d mss = %d",
884                                 dev->name, __func__, __LINE__, mss);
885                         vxge_hw_fifo_txdl_mss_set(dtr, mss);
886                 } else {
887                         vxge_assert(skb->len <=
888                                 dev->mtu + VXGE_HW_MAC_HEADER_MAX_SIZE);
889                         vxge_assert(0);
890                         goto _exit1;
891                 }
892         }
893
894         if (skb->ip_summed == CHECKSUM_PARTIAL)
895                 vxge_hw_fifo_txdl_cksum_set_bits(dtr,
896                                         VXGE_HW_FIFO_TXD_TX_CKO_IPV4_EN |
897                                         VXGE_HW_FIFO_TXD_TX_CKO_TCP_EN |
898                                         VXGE_HW_FIFO_TXD_TX_CKO_UDP_EN);
899
900         vxge_hw_fifo_txdl_post(fifo_hw, dtr);
901
902         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
903                 dev->name, __func__, __LINE__);
904         return NETDEV_TX_OK;
905
906 _exit2:
907         vxge_debug_tx(VXGE_TRACE, "%s: pci_map_page failed", dev->name);
908 _exit1:
909         j = 0;
910         frag = &skb_shinfo(skb)->frags[0];
911
912         pci_unmap_single(fifo->pdev, txdl_priv->dma_buffers[j++],
913                         skb_headlen(skb), PCI_DMA_TODEVICE);
914
915         for (; j < i; j++) {
916                 pci_unmap_page(fifo->pdev, txdl_priv->dma_buffers[j],
917                         frag->size, PCI_DMA_TODEVICE);
918                 frag += 1;
919         }
920
921         vxge_hw_fifo_txdl_free(fifo_hw, dtr);
922 _exit0:
923         netif_tx_stop_queue(fifo->txq);
924         dev_kfree_skb(skb);
925
926         return NETDEV_TX_OK;
927 }
928
929 /*
930  * vxge_rx_term
931  *
932  * Function will be called by hw function to abort all outstanding receive
933  * descriptors.
934  */
935 static void
936 vxge_rx_term(void *dtrh, enum vxge_hw_rxd_state state, void *userdata)
937 {
938         struct vxge_ring *ring = (struct vxge_ring *)userdata;
939         struct vxge_rx_priv *rx_priv =
940                 vxge_hw_ring_rxd_private_get(dtrh);
941
942         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
943                         ring->ndev->name, __func__, __LINE__);
944         if (state != VXGE_HW_RXD_STATE_POSTED)
945                 return;
946
947         pci_unmap_single(ring->pdev, rx_priv->data_dma,
948                 rx_priv->data_size, PCI_DMA_FROMDEVICE);
949
950         dev_kfree_skb(rx_priv->skb);
951         rx_priv->skb_data = NULL;
952
953         vxge_debug_entryexit(VXGE_TRACE,
954                 "%s: %s:%d  Exiting...",
955                 ring->ndev->name, __func__, __LINE__);
956 }
957
958 /*
959  * vxge_tx_term
960  *
961  * Function will be called to abort all outstanding tx descriptors
962  */
963 static void
964 vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata)
965 {
966         struct vxge_fifo *fifo = (struct vxge_fifo *)userdata;
967         skb_frag_t *frag;
968         int i = 0, j, frg_cnt;
969         struct vxge_tx_priv *txd_priv = vxge_hw_fifo_txdl_private_get(dtrh);
970         struct sk_buff *skb = txd_priv->skb;
971
972         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
973
974         if (state != VXGE_HW_TXDL_STATE_POSTED)
975                 return;
976
977         /* check skb validity */
978         vxge_assert(skb);
979         frg_cnt = skb_shinfo(skb)->nr_frags;
980         frag = &skb_shinfo(skb)->frags[0];
981
982         /*  for unfragmented skb */
983         pci_unmap_single(fifo->pdev, txd_priv->dma_buffers[i++],
984                 skb_headlen(skb), PCI_DMA_TODEVICE);
985
986         for (j = 0; j < frg_cnt; j++) {
987                 pci_unmap_page(fifo->pdev, txd_priv->dma_buffers[i++],
988                                frag->size, PCI_DMA_TODEVICE);
989                 frag += 1;
990         }
991
992         dev_kfree_skb(skb);
993
994         vxge_debug_entryexit(VXGE_TRACE,
995                 "%s:%d  Exiting...", __func__, __LINE__);
996 }
997
998 /**
999  * vxge_set_multicast
1000  * @dev: pointer to the device structure
1001  *
1002  * Entry point for multicast address enable/disable
1003  * This function is a driver entry point which gets called by the kernel
1004  * whenever multicast addresses must be enabled/disabled. This also gets
1005  * called to set/reset promiscuous mode. Depending on the deivce flag, we
1006  * determine, if multicast address must be enabled or if promiscuous mode
1007  * is to be disabled etc.
1008  */
1009 static void vxge_set_multicast(struct net_device *dev)
1010 {
1011         struct netdev_hw_addr *ha;
1012         struct vxgedev *vdev;
1013         int i, mcast_cnt = 0;
1014         struct __vxge_hw_device *hldev;
1015         struct vxge_vpath *vpath;
1016         enum vxge_hw_status status = VXGE_HW_OK;
1017         struct macInfo mac_info;
1018         int vpath_idx = 0;
1019         struct vxge_mac_addrs *mac_entry;
1020         struct list_head *list_head;
1021         struct list_head *entry, *next;
1022         u8 *mac_address = NULL;
1023
1024         vxge_debug_entryexit(VXGE_TRACE,
1025                 "%s:%d", __func__, __LINE__);
1026
1027         vdev = (struct vxgedev *)netdev_priv(dev);
1028         hldev = (struct __vxge_hw_device  *)vdev->devh;
1029
1030         if (unlikely(!is_vxge_card_up(vdev)))
1031                 return;
1032
1033         if ((dev->flags & IFF_ALLMULTI) && (!vdev->all_multi_flg)) {
1034                 for (i = 0; i < vdev->no_of_vpath; i++) {
1035                         vpath = &vdev->vpaths[i];
1036                         vxge_assert(vpath->is_open);
1037                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
1038                         if (status != VXGE_HW_OK)
1039                                 vxge_debug_init(VXGE_ERR, "failed to enable "
1040                                                 "multicast, status %d", status);
1041                         vdev->all_multi_flg = 1;
1042                 }
1043         } else if (!(dev->flags & IFF_ALLMULTI) && (vdev->all_multi_flg)) {
1044                 for (i = 0; i < vdev->no_of_vpath; i++) {
1045                         vpath = &vdev->vpaths[i];
1046                         vxge_assert(vpath->is_open);
1047                         status = vxge_hw_vpath_mcast_disable(vpath->handle);
1048                         if (status != VXGE_HW_OK)
1049                                 vxge_debug_init(VXGE_ERR, "failed to disable "
1050                                                 "multicast, status %d", status);
1051                         vdev->all_multi_flg = 0;
1052                 }
1053         }
1054
1055
1056         if (!vdev->config.addr_learn_en) {
1057                 for (i = 0; i < vdev->no_of_vpath; i++) {
1058                         vpath = &vdev->vpaths[i];
1059                         vxge_assert(vpath->is_open);
1060
1061                         if (dev->flags & IFF_PROMISC)
1062                                 status = vxge_hw_vpath_promisc_enable(
1063                                         vpath->handle);
1064                         else
1065                                 status = vxge_hw_vpath_promisc_disable(
1066                                         vpath->handle);
1067                         if (status != VXGE_HW_OK)
1068                                 vxge_debug_init(VXGE_ERR, "failed to %s promisc"
1069                                         ", status %d", dev->flags&IFF_PROMISC ?
1070                                         "enable" : "disable", status);
1071                 }
1072         }
1073
1074         memset(&mac_info, 0, sizeof(struct macInfo));
1075         /* Update individual M_CAST address list */
1076         if ((!vdev->all_multi_flg) && netdev_mc_count(dev)) {
1077                 mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
1078                 list_head = &vdev->vpaths[0].mac_addr_list;
1079                 if ((netdev_mc_count(dev) +
1080                         (vdev->vpaths[0].mac_addr_cnt - mcast_cnt)) >
1081                                 vdev->vpaths[0].max_mac_addr_cnt)
1082                         goto _set_all_mcast;
1083
1084                 /* Delete previous MC's */
1085                 for (i = 0; i < mcast_cnt; i++) {
1086                         list_for_each_safe(entry, next, list_head) {
1087                                 mac_entry = (struct vxge_mac_addrs *) entry;
1088                                 /* Copy the mac address to delete */
1089                                 mac_address = (u8 *)&mac_entry->macaddr;
1090                                 memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1091
1092                                 /* Is this a multicast address */
1093                                 if (0x01 & mac_info.macaddr[0]) {
1094                                         for (vpath_idx = 0; vpath_idx <
1095                                                 vdev->no_of_vpath;
1096                                                 vpath_idx++) {
1097                                                 mac_info.vpath_no = vpath_idx;
1098                                                 status = vxge_del_mac_addr(
1099                                                                 vdev,
1100                                                                 &mac_info);
1101                                         }
1102                                 }
1103                         }
1104                 }
1105
1106                 /* Add new ones */
1107                 netdev_for_each_mc_addr(ha, dev) {
1108                         memcpy(mac_info.macaddr, ha->addr, ETH_ALEN);
1109                         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
1110                                         vpath_idx++) {
1111                                 mac_info.vpath_no = vpath_idx;
1112                                 mac_info.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1113                                 status = vxge_add_mac_addr(vdev, &mac_info);
1114                                 if (status != VXGE_HW_OK) {
1115                                         vxge_debug_init(VXGE_ERR,
1116                                                 "%s:%d Setting individual"
1117                                                 "multicast address failed",
1118                                                 __func__, __LINE__);
1119                                         goto _set_all_mcast;
1120                                 }
1121                         }
1122                 }
1123
1124                 return;
1125 _set_all_mcast:
1126                 mcast_cnt = vdev->vpaths[0].mcast_addr_cnt;
1127                 /* Delete previous MC's */
1128                 for (i = 0; i < mcast_cnt; i++) {
1129                         list_for_each_safe(entry, next, list_head) {
1130                                 mac_entry = (struct vxge_mac_addrs *) entry;
1131                                 /* Copy the mac address to delete */
1132                                 mac_address = (u8 *)&mac_entry->macaddr;
1133                                 memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1134
1135                                 /* Is this a multicast address */
1136                                 if (0x01 & mac_info.macaddr[0])
1137                                         break;
1138                         }
1139
1140                         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath;
1141                                         vpath_idx++) {
1142                                 mac_info.vpath_no = vpath_idx;
1143                                 status = vxge_del_mac_addr(vdev, &mac_info);
1144                         }
1145                 }
1146
1147                 /* Enable all multicast */
1148                 for (i = 0; i < vdev->no_of_vpath; i++) {
1149                         vpath = &vdev->vpaths[i];
1150                         vxge_assert(vpath->is_open);
1151
1152                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
1153                         if (status != VXGE_HW_OK) {
1154                                 vxge_debug_init(VXGE_ERR,
1155                                         "%s:%d Enabling all multicasts failed",
1156                                          __func__, __LINE__);
1157                         }
1158                         vdev->all_multi_flg = 1;
1159                 }
1160                 dev->flags |= IFF_ALLMULTI;
1161         }
1162
1163         vxge_debug_entryexit(VXGE_TRACE,
1164                 "%s:%d  Exiting...", __func__, __LINE__);
1165 }
1166
1167 /**
1168  * vxge_set_mac_addr
1169  * @dev: pointer to the device structure
1170  *
1171  * Update entry "0" (default MAC addr)
1172  */
1173 static int vxge_set_mac_addr(struct net_device *dev, void *p)
1174 {
1175         struct sockaddr *addr = p;
1176         struct vxgedev *vdev;
1177         struct __vxge_hw_device  *hldev;
1178         enum vxge_hw_status status = VXGE_HW_OK;
1179         struct macInfo mac_info_new, mac_info_old;
1180         int vpath_idx = 0;
1181
1182         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1183
1184         vdev = (struct vxgedev *)netdev_priv(dev);
1185         hldev = vdev->devh;
1186
1187         if (!is_valid_ether_addr(addr->sa_data))
1188                 return -EINVAL;
1189
1190         memset(&mac_info_new, 0, sizeof(struct macInfo));
1191         memset(&mac_info_old, 0, sizeof(struct macInfo));
1192
1193         vxge_debug_entryexit(VXGE_TRACE, "%s:%d  Exiting...",
1194                 __func__, __LINE__);
1195
1196         /* Get the old address */
1197         memcpy(mac_info_old.macaddr, dev->dev_addr, dev->addr_len);
1198
1199         /* Copy the new address */
1200         memcpy(mac_info_new.macaddr, addr->sa_data, dev->addr_len);
1201
1202         /* First delete the old mac address from all the vpaths
1203         as we can't specify the index while adding new mac address */
1204         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
1205                 struct vxge_vpath *vpath = &vdev->vpaths[vpath_idx];
1206                 if (!vpath->is_open) {
1207                         /* This can happen when this interface is added/removed
1208                         to the bonding interface. Delete this station address
1209                         from the linked list */
1210                         vxge_mac_list_del(vpath, &mac_info_old);
1211
1212                         /* Add this new address to the linked list
1213                         for later restoring */
1214                         vxge_mac_list_add(vpath, &mac_info_new);
1215
1216                         continue;
1217                 }
1218                 /* Delete the station address */
1219                 mac_info_old.vpath_no = vpath_idx;
1220                 status = vxge_del_mac_addr(vdev, &mac_info_old);
1221         }
1222
1223         if (unlikely(!is_vxge_card_up(vdev))) {
1224                 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1225                 return VXGE_HW_OK;
1226         }
1227
1228         /* Set this mac address to all the vpaths */
1229         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
1230                 mac_info_new.vpath_no = vpath_idx;
1231                 mac_info_new.state = VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1232                 status = vxge_add_mac_addr(vdev, &mac_info_new);
1233                 if (status != VXGE_HW_OK)
1234                         return -EINVAL;
1235         }
1236
1237         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1238
1239         return status;
1240 }
1241
1242 /*
1243  * vxge_vpath_intr_enable
1244  * @vdev: pointer to vdev
1245  * @vp_id: vpath for which to enable the interrupts
1246  *
1247  * Enables the interrupts for the vpath
1248 */
1249 void vxge_vpath_intr_enable(struct vxgedev *vdev, int vp_id)
1250 {
1251         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1252         int msix_id = 0;
1253         int tim_msix_id[4] = {0, 1, 0, 0};
1254         int alarm_msix_id = VXGE_ALARM_MSIX_ID;
1255
1256         vxge_hw_vpath_intr_enable(vpath->handle);
1257
1258         if (vdev->config.intr_type == INTA)
1259                 vxge_hw_vpath_inta_unmask_tx_rx(vpath->handle);
1260         else {
1261                 vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id,
1262                         alarm_msix_id);
1263
1264                 msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE;
1265                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id);
1266                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id + 1);
1267
1268                 /* enable the alarm vector */
1269                 msix_id = (vpath->handle->vpath->hldev->first_vp_id *
1270                         VXGE_HW_VPATH_MSIX_ACTIVE) + alarm_msix_id;
1271                 vxge_hw_vpath_msix_unmask(vpath->handle, msix_id);
1272         }
1273 }
1274
1275 /*
1276  * vxge_vpath_intr_disable
1277  * @vdev: pointer to vdev
1278  * @vp_id: vpath for which to disable the interrupts
1279  *
1280  * Disables the interrupts for the vpath
1281 */
1282 void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id)
1283 {
1284         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1285         int msix_id;
1286
1287         vxge_hw_vpath_intr_disable(vpath->handle);
1288
1289         if (vdev->config.intr_type == INTA)
1290                 vxge_hw_vpath_inta_mask_tx_rx(vpath->handle);
1291         else {
1292                 msix_id = vpath->device_id * VXGE_HW_VPATH_MSIX_ACTIVE;
1293                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
1294                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id + 1);
1295
1296                 /* disable the alarm vector */
1297                 msix_id = (vpath->handle->vpath->hldev->first_vp_id *
1298                         VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
1299                 vxge_hw_vpath_msix_mask(vpath->handle, msix_id);
1300         }
1301 }
1302
1303 /*
1304  * vxge_reset_vpath
1305  * @vdev: pointer to vdev
1306  * @vp_id: vpath to reset
1307  *
1308  * Resets the vpath
1309 */
1310 static int vxge_reset_vpath(struct vxgedev *vdev, int vp_id)
1311 {
1312         enum vxge_hw_status status = VXGE_HW_OK;
1313         struct vxge_vpath *vpath = &vdev->vpaths[vp_id];
1314         int ret = 0;
1315
1316         /* check if device is down already */
1317         if (unlikely(!is_vxge_card_up(vdev)))
1318                 return 0;
1319
1320         /* is device reset already scheduled */
1321         if (test_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
1322                 return 0;
1323
1324         if (vpath->handle) {
1325                 if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) {
1326                         if (is_vxge_card_up(vdev) &&
1327                                 vxge_hw_vpath_recover_from_reset(vpath->handle)
1328                                         != VXGE_HW_OK) {
1329                                 vxge_debug_init(VXGE_ERR,
1330                                         "vxge_hw_vpath_recover_from_reset"
1331                                         "failed for vpath:%d", vp_id);
1332                                 return status;
1333                         }
1334                 } else {
1335                         vxge_debug_init(VXGE_ERR,
1336                                 "vxge_hw_vpath_reset failed for"
1337                                 "vpath:%d", vp_id);
1338                                 return status;
1339                 }
1340         } else
1341                 return VXGE_HW_FAIL;
1342
1343         vxge_restore_vpath_mac_addr(vpath);
1344         vxge_restore_vpath_vid_table(vpath);
1345
1346         /* Enable all broadcast */
1347         vxge_hw_vpath_bcast_enable(vpath->handle);
1348
1349         /* Enable all multicast */
1350         if (vdev->all_multi_flg) {
1351                 status = vxge_hw_vpath_mcast_enable(vpath->handle);
1352                 if (status != VXGE_HW_OK)
1353                         vxge_debug_init(VXGE_ERR,
1354                                 "%s:%d Enabling multicast failed",
1355                                 __func__, __LINE__);
1356         }
1357
1358         /* Enable the interrupts */
1359         vxge_vpath_intr_enable(vdev, vp_id);
1360
1361         smp_wmb();
1362
1363         /* Enable the flow of traffic through the vpath */
1364         vxge_hw_vpath_enable(vpath->handle);
1365
1366         smp_wmb();
1367         vxge_hw_vpath_rx_doorbell_init(vpath->handle);
1368         vpath->ring.last_status = VXGE_HW_OK;
1369
1370         /* Vpath reset done */
1371         clear_bit(vp_id, &vdev->vp_reset);
1372
1373         /* Start the vpath queue */
1374         if (netif_tx_queue_stopped(vpath->fifo.txq))
1375                 netif_tx_wake_queue(vpath->fifo.txq);
1376
1377         return ret;
1378 }
1379
1380 static int do_vxge_reset(struct vxgedev *vdev, int event)
1381 {
1382         enum vxge_hw_status status;
1383         int ret = 0, vp_id, i;
1384
1385         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1386
1387         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET)) {
1388                 /* check if device is down already */
1389                 if (unlikely(!is_vxge_card_up(vdev)))
1390                         return 0;
1391
1392                 /* is reset already scheduled */
1393                 if (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
1394                         return 0;
1395         }
1396
1397         if (event == VXGE_LL_FULL_RESET) {
1398                 /* wait for all the vpath reset to complete */
1399                 for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
1400                         while (test_bit(vp_id, &vdev->vp_reset))
1401                                 msleep(50);
1402                 }
1403
1404                 /* if execution mode is set to debug, don't reset the adapter */
1405                 if (unlikely(vdev->exec_mode)) {
1406                         vxge_debug_init(VXGE_ERR,
1407                                 "%s: execution mode is debug, returning..",
1408                                 vdev->ndev->name);
1409                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
1410                         netif_tx_stop_all_queues(vdev->ndev);
1411                         return 0;
1412                 }
1413         }
1414
1415         if (event == VXGE_LL_FULL_RESET) {
1416                 vxge_hw_device_intr_disable(vdev->devh);
1417
1418                 switch (vdev->cric_err_event) {
1419                 case VXGE_HW_EVENT_UNKNOWN:
1420                         netif_tx_stop_all_queues(vdev->ndev);
1421                         vxge_debug_init(VXGE_ERR,
1422                                 "fatal: %s: Disabling device due to"
1423                                 "unknown error",
1424                                 vdev->ndev->name);
1425                         ret = -EPERM;
1426                         goto out;
1427                 case VXGE_HW_EVENT_RESET_START:
1428                         break;
1429                 case VXGE_HW_EVENT_RESET_COMPLETE:
1430                 case VXGE_HW_EVENT_LINK_DOWN:
1431                 case VXGE_HW_EVENT_LINK_UP:
1432                 case VXGE_HW_EVENT_ALARM_CLEARED:
1433                 case VXGE_HW_EVENT_ECCERR:
1434                 case VXGE_HW_EVENT_MRPCIM_ECCERR:
1435                         ret = -EPERM;
1436                         goto out;
1437                 case VXGE_HW_EVENT_FIFO_ERR:
1438                 case VXGE_HW_EVENT_VPATH_ERR:
1439                         break;
1440                 case VXGE_HW_EVENT_CRITICAL_ERR:
1441                         netif_tx_stop_all_queues(vdev->ndev);
1442                         vxge_debug_init(VXGE_ERR,
1443                                 "fatal: %s: Disabling device due to"
1444                                 "serious error",
1445                                 vdev->ndev->name);
1446                         /* SOP or device reset required */
1447                         /* This event is not currently used */
1448                         ret = -EPERM;
1449                         goto out;
1450                 case VXGE_HW_EVENT_SERR:
1451                         netif_tx_stop_all_queues(vdev->ndev);
1452                         vxge_debug_init(VXGE_ERR,
1453                                 "fatal: %s: Disabling device due to"
1454                                 "serious error",
1455                                 vdev->ndev->name);
1456                         ret = -EPERM;
1457                         goto out;
1458                 case VXGE_HW_EVENT_SRPCIM_SERR:
1459                 case VXGE_HW_EVENT_MRPCIM_SERR:
1460                         ret = -EPERM;
1461                         goto out;
1462                 case VXGE_HW_EVENT_SLOT_FREEZE:
1463                         netif_tx_stop_all_queues(vdev->ndev);
1464                         vxge_debug_init(VXGE_ERR,
1465                                 "fatal: %s: Disabling device due to"
1466                                 "slot freeze",
1467                                 vdev->ndev->name);
1468                         ret = -EPERM;
1469                         goto out;
1470                 default:
1471                         break;
1472
1473                 }
1474         }
1475
1476         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_START_RESET))
1477                 netif_tx_stop_all_queues(vdev->ndev);
1478
1479         if (event == VXGE_LL_FULL_RESET) {
1480                 status = vxge_reset_all_vpaths(vdev);
1481                 if (status != VXGE_HW_OK) {
1482                         vxge_debug_init(VXGE_ERR,
1483                                 "fatal: %s: can not reset vpaths",
1484                                 vdev->ndev->name);
1485                         ret = -EPERM;
1486                         goto out;
1487                 }
1488         }
1489
1490         if (event == VXGE_LL_COMPL_RESET) {
1491                 for (i = 0; i < vdev->no_of_vpath; i++)
1492                         if (vdev->vpaths[i].handle) {
1493                                 if (vxge_hw_vpath_recover_from_reset(
1494                                         vdev->vpaths[i].handle)
1495                                                 != VXGE_HW_OK) {
1496                                         vxge_debug_init(VXGE_ERR,
1497                                                 "vxge_hw_vpath_recover_"
1498                                                 "from_reset failed for vpath: "
1499                                                 "%d", i);
1500                                         ret = -EPERM;
1501                                         goto out;
1502                                 }
1503                                 } else {
1504                                         vxge_debug_init(VXGE_ERR,
1505                                         "vxge_hw_vpath_reset failed for "
1506                                                 "vpath:%d", i);
1507                                         ret = -EPERM;
1508                                         goto out;
1509                                 }
1510         }
1511
1512         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET)) {
1513                 /* Reprogram the DA table with populated mac addresses */
1514                 for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
1515                         vxge_restore_vpath_mac_addr(&vdev->vpaths[vp_id]);
1516                         vxge_restore_vpath_vid_table(&vdev->vpaths[vp_id]);
1517                 }
1518
1519                 /* enable vpath interrupts */
1520                 for (i = 0; i < vdev->no_of_vpath; i++)
1521                         vxge_vpath_intr_enable(vdev, i);
1522
1523                 vxge_hw_device_intr_enable(vdev->devh);
1524
1525                 smp_wmb();
1526
1527                 /* Indicate card up */
1528                 set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
1529
1530                 /* Get the traffic to flow through the vpaths */
1531                 for (i = 0; i < vdev->no_of_vpath; i++) {
1532                         vxge_hw_vpath_enable(vdev->vpaths[i].handle);
1533                         smp_wmb();
1534                         vxge_hw_vpath_rx_doorbell_init(vdev->vpaths[i].handle);
1535                 }
1536
1537                 netif_tx_wake_all_queues(vdev->ndev);
1538         }
1539
1540 out:
1541         vxge_debug_entryexit(VXGE_TRACE,
1542                 "%s:%d  Exiting...", __func__, __LINE__);
1543
1544         /* Indicate reset done */
1545         if ((event == VXGE_LL_FULL_RESET) || (event == VXGE_LL_COMPL_RESET))
1546                 clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
1547         return ret;
1548 }
1549
1550 /*
1551  * vxge_reset
1552  * @vdev: pointer to ll device
1553  *
1554  * driver may reset the chip on events of serr, eccerr, etc
1555  */
1556 int vxge_reset(struct vxgedev *vdev)
1557 {
1558         return do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
1559 }
1560
1561 /**
1562  * vxge_poll - Receive handler when Receive Polling is used.
1563  * @dev: pointer to the device structure.
1564  * @budget: Number of packets budgeted to be processed in this iteration.
1565  *
1566  * This function comes into picture only if Receive side is being handled
1567  * through polling (called NAPI in linux). It mostly does what the normal
1568  * Rx interrupt handler does in terms of descriptor and packet processing
1569  * but not in an interrupt context. Also it will process a specified number
1570  * of packets at most in one iteration. This value is passed down by the
1571  * kernel as the function argument 'budget'.
1572  */
1573 static int vxge_poll_msix(struct napi_struct *napi, int budget)
1574 {
1575         struct vxge_ring *ring =
1576                 container_of(napi, struct vxge_ring, napi);
1577         int budget_org = budget;
1578         ring->budget = budget;
1579
1580         vxge_hw_vpath_poll_rx(ring->handle);
1581
1582         if (ring->pkts_processed < budget_org) {
1583                 napi_complete(napi);
1584                 /* Re enable the Rx interrupts for the vpath */
1585                 vxge_hw_channel_msix_unmask(
1586                                 (struct __vxge_hw_channel *)ring->handle,
1587                                 ring->rx_vector_no);
1588         }
1589
1590         return ring->pkts_processed;
1591 }
1592
1593 static int vxge_poll_inta(struct napi_struct *napi, int budget)
1594 {
1595         struct vxgedev *vdev = container_of(napi, struct vxgedev, napi);
1596         int pkts_processed = 0;
1597         int i;
1598         int budget_org = budget;
1599         struct vxge_ring *ring;
1600
1601         struct __vxge_hw_device  *hldev = (struct __vxge_hw_device *)
1602                 pci_get_drvdata(vdev->pdev);
1603
1604         for (i = 0; i < vdev->no_of_vpath; i++) {
1605                 ring = &vdev->vpaths[i].ring;
1606                 ring->budget = budget;
1607                 vxge_hw_vpath_poll_rx(ring->handle);
1608                 pkts_processed += ring->pkts_processed;
1609                 budget -= ring->pkts_processed;
1610                 if (budget <= 0)
1611                         break;
1612         }
1613
1614         VXGE_COMPLETE_ALL_TX(vdev);
1615
1616         if (pkts_processed < budget_org) {
1617                 napi_complete(napi);
1618                 /* Re enable the Rx interrupts for the ring */
1619                 vxge_hw_device_unmask_all(hldev);
1620                 vxge_hw_device_flush_io(hldev);
1621         }
1622
1623         return pkts_processed;
1624 }
1625
1626 #ifdef CONFIG_NET_POLL_CONTROLLER
1627 /**
1628  * vxge_netpoll - netpoll event handler entry point
1629  * @dev : pointer to the device structure.
1630  * Description:
1631  *      This function will be called by upper layer to check for events on the
1632  * interface in situations where interrupts are disabled. It is used for
1633  * specific in-kernel networking tasks, such as remote consoles and kernel
1634  * debugging over the network (example netdump in RedHat).
1635  */
1636 static void vxge_netpoll(struct net_device *dev)
1637 {
1638         struct __vxge_hw_device  *hldev;
1639         struct vxgedev *vdev;
1640
1641         vdev = (struct vxgedev *)netdev_priv(dev);
1642         hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev);
1643
1644         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
1645
1646         if (pci_channel_offline(vdev->pdev))
1647                 return;
1648
1649         disable_irq(dev->irq);
1650         vxge_hw_device_clear_tx_rx(hldev);
1651
1652         vxge_hw_device_clear_tx_rx(hldev);
1653         VXGE_COMPLETE_ALL_RX(vdev);
1654         VXGE_COMPLETE_ALL_TX(vdev);
1655
1656         enable_irq(dev->irq);
1657
1658         vxge_debug_entryexit(VXGE_TRACE,
1659                 "%s:%d  Exiting...", __func__, __LINE__);
1660 }
1661 #endif
1662
1663 /* RTH configuration */
1664 static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
1665 {
1666         enum vxge_hw_status status = VXGE_HW_OK;
1667         struct vxge_hw_rth_hash_types hash_types;
1668         u8 itable[256] = {0}; /* indirection table */
1669         u8 mtable[256] = {0}; /* CPU to vpath mapping  */
1670         int index;
1671
1672         /*
1673          * Filling
1674          *      - itable with bucket numbers
1675          *      - mtable with bucket-to-vpath mapping
1676          */
1677         for (index = 0; index < (1 << vdev->config.rth_bkt_sz); index++) {
1678                 itable[index] = index;
1679                 mtable[index] = index % vdev->no_of_vpath;
1680         }
1681
1682         /* Fill RTH hash types */
1683         hash_types.hash_type_tcpipv4_en   = vdev->config.rth_hash_type_tcpipv4;
1684         hash_types.hash_type_ipv4_en      = vdev->config.rth_hash_type_ipv4;
1685         hash_types.hash_type_tcpipv6_en   = vdev->config.rth_hash_type_tcpipv6;
1686         hash_types.hash_type_ipv6_en      = vdev->config.rth_hash_type_ipv6;
1687         hash_types.hash_type_tcpipv6ex_en =
1688                                         vdev->config.rth_hash_type_tcpipv6ex;
1689         hash_types.hash_type_ipv6ex_en    = vdev->config.rth_hash_type_ipv6ex;
1690
1691         /* set indirection table, bucket-to-vpath mapping */
1692         status = vxge_hw_vpath_rts_rth_itable_set(vdev->vp_handles,
1693                                                 vdev->no_of_vpath,
1694                                                 mtable, itable,
1695                                                 vdev->config.rth_bkt_sz);
1696         if (status != VXGE_HW_OK) {
1697                 vxge_debug_init(VXGE_ERR,
1698                         "RTH indirection table configuration failed "
1699                         "for vpath:%d", vdev->vpaths[0].device_id);
1700                 return status;
1701         }
1702
1703         /*
1704         * Because the itable_set() method uses the active_table field
1705         * for the target virtual path the RTH config should be updated
1706         * for all VPATHs. The h/w only uses the lowest numbered VPATH
1707         * when steering frames.
1708         */
1709          for (index = 0; index < vdev->no_of_vpath; index++) {
1710                 status = vxge_hw_vpath_rts_rth_set(
1711                                 vdev->vpaths[index].handle,
1712                                 vdev->config.rth_algorithm,
1713                                 &hash_types,
1714                                 vdev->config.rth_bkt_sz);
1715
1716                  if (status != VXGE_HW_OK) {
1717                         vxge_debug_init(VXGE_ERR,
1718                                 "RTH configuration failed for vpath:%d",
1719                                 vdev->vpaths[index].device_id);
1720                         return status;
1721                  }
1722          }
1723
1724         return status;
1725 }
1726
1727 int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac)
1728 {
1729         struct vxge_mac_addrs *new_mac_entry;
1730         u8 *mac_address = NULL;
1731
1732         if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT)
1733                 return TRUE;
1734
1735         new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC);
1736         if (!new_mac_entry) {
1737                 vxge_debug_mem(VXGE_ERR,
1738                         "%s: memory allocation failed",
1739                         VXGE_DRIVER_NAME);
1740                 return FALSE;
1741         }
1742
1743         list_add(&new_mac_entry->item, &vpath->mac_addr_list);
1744
1745         /* Copy the new mac address to the list */
1746         mac_address = (u8 *)&new_mac_entry->macaddr;
1747         memcpy(mac_address, mac->macaddr, ETH_ALEN);
1748
1749         new_mac_entry->state = mac->state;
1750         vpath->mac_addr_cnt++;
1751
1752         /* Is this a multicast address */
1753         if (0x01 & mac->macaddr[0])
1754                 vpath->mcast_addr_cnt++;
1755
1756         return TRUE;
1757 }
1758
1759 /* Add a mac address to DA table */
1760 enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
1761 {
1762         enum vxge_hw_status status = VXGE_HW_OK;
1763         struct vxge_vpath *vpath;
1764         enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode;
1765
1766         if (0x01 & mac->macaddr[0]) /* multicast address */
1767                 duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE;
1768         else
1769                 duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE;
1770
1771         vpath = &vdev->vpaths[mac->vpath_no];
1772         status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr,
1773                                                 mac->macmask, duplicate_mode);
1774         if (status != VXGE_HW_OK) {
1775                 vxge_debug_init(VXGE_ERR,
1776                         "DA config add entry failed for vpath:%d",
1777                         vpath->device_id);
1778         } else
1779                 if (FALSE == vxge_mac_list_add(vpath, mac))
1780                         status = -EPERM;
1781
1782         return status;
1783 }
1784
1785 int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac)
1786 {
1787         struct list_head *entry, *next;
1788         u64 del_mac = 0;
1789         u8 *mac_address = (u8 *) (&del_mac);
1790
1791         /* Copy the mac address to delete from the list */
1792         memcpy(mac_address, mac->macaddr, ETH_ALEN);
1793
1794         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
1795                 if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) {
1796                         list_del(entry);
1797                         kfree((struct vxge_mac_addrs *)entry);
1798                         vpath->mac_addr_cnt--;
1799
1800                         /* Is this a multicast address */
1801                         if (0x01 & mac->macaddr[0])
1802                                 vpath->mcast_addr_cnt--;
1803                         return TRUE;
1804                 }
1805         }
1806
1807         return FALSE;
1808 }
1809 /* delete a mac address from DA table */
1810 enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
1811 {
1812         enum vxge_hw_status status = VXGE_HW_OK;
1813         struct vxge_vpath *vpath;
1814
1815         vpath = &vdev->vpaths[mac->vpath_no];
1816         status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr,
1817                                                 mac->macmask);
1818         if (status != VXGE_HW_OK) {
1819                 vxge_debug_init(VXGE_ERR,
1820                         "DA config delete entry failed for vpath:%d",
1821                         vpath->device_id);
1822         } else
1823                 vxge_mac_list_del(vpath, mac);
1824         return status;
1825 }
1826
1827 /* list all mac addresses from DA table */
1828 enum vxge_hw_status
1829 static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath,
1830                                         struct macInfo *mac)
1831 {
1832         enum vxge_hw_status status = VXGE_HW_OK;
1833         unsigned char macmask[ETH_ALEN];
1834         unsigned char macaddr[ETH_ALEN];
1835
1836         status = vxge_hw_vpath_mac_addr_get(vpath->handle,
1837                                 macaddr, macmask);
1838         if (status != VXGE_HW_OK) {
1839                 vxge_debug_init(VXGE_ERR,
1840                         "DA config list entry failed for vpath:%d",
1841                         vpath->device_id);
1842                 return status;
1843         }
1844
1845         while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) {
1846
1847                 status = vxge_hw_vpath_mac_addr_get_next(vpath->handle,
1848                                 macaddr, macmask);
1849                 if (status != VXGE_HW_OK)
1850                         break;
1851         }
1852
1853         return status;
1854 }
1855
1856 /* Store all vlan ids from the list to the vid table */
1857 enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath)
1858 {
1859         enum vxge_hw_status status = VXGE_HW_OK;
1860         struct vxgedev *vdev = vpath->vdev;
1861         u16 vid;
1862
1863         if (vdev->vlgrp && vpath->is_open) {
1864
1865                 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
1866                         if (!vlan_group_get_device(vdev->vlgrp, vid))
1867                                 continue;
1868                         /* Add these vlan to the vid table */
1869                         status = vxge_hw_vpath_vid_add(vpath->handle, vid);
1870                 }
1871         }
1872
1873         return status;
1874 }
1875
1876 /* Store all mac addresses from the list to the DA table */
1877 enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath)
1878 {
1879         enum vxge_hw_status status = VXGE_HW_OK;
1880         struct macInfo mac_info;
1881         u8 *mac_address = NULL;
1882         struct list_head *entry, *next;
1883
1884         memset(&mac_info, 0, sizeof(struct macInfo));
1885
1886         if (vpath->is_open) {
1887
1888                 list_for_each_safe(entry, next, &vpath->mac_addr_list) {
1889                         mac_address =
1890                                 (u8 *)&
1891                                 ((struct vxge_mac_addrs *)entry)->macaddr;
1892                         memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
1893                         ((struct vxge_mac_addrs *)entry)->state =
1894                                 VXGE_LL_MAC_ADDR_IN_DA_TABLE;
1895                         /* does this mac address already exist in da table? */
1896                         status = vxge_search_mac_addr_in_da_table(vpath,
1897                                 &mac_info);
1898                         if (status != VXGE_HW_OK) {
1899                                 /* Add this mac address to the DA table */
1900                                 status = vxge_hw_vpath_mac_addr_add(
1901                                         vpath->handle, mac_info.macaddr,
1902                                         mac_info.macmask,
1903                                     VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE);
1904                                 if (status != VXGE_HW_OK) {
1905                                         vxge_debug_init(VXGE_ERR,
1906                                             "DA add entry failed for vpath:%d",
1907                                             vpath->device_id);
1908                                         ((struct vxge_mac_addrs *)entry)->state
1909                                                 = VXGE_LL_MAC_ADDR_IN_LIST;
1910                                 }
1911                         }
1912                 }
1913         }
1914
1915         return status;
1916 }
1917
1918 /* reset vpaths */
1919 enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
1920 {
1921         enum vxge_hw_status status = VXGE_HW_OK;
1922         struct vxge_vpath *vpath;
1923         int i;
1924
1925         for (i = 0; i < vdev->no_of_vpath; i++) {
1926                 vpath = &vdev->vpaths[i];
1927                 if (vpath->handle) {
1928                         if (vxge_hw_vpath_reset(vpath->handle) == VXGE_HW_OK) {
1929                                 if (is_vxge_card_up(vdev) &&
1930                                         vxge_hw_vpath_recover_from_reset(
1931                                                 vpath->handle) != VXGE_HW_OK) {
1932                                         vxge_debug_init(VXGE_ERR,
1933                                                 "vxge_hw_vpath_recover_"
1934                                                 "from_reset failed for vpath: "
1935                                                 "%d", i);
1936                                         return status;
1937                                 }
1938                         } else {
1939                                 vxge_debug_init(VXGE_ERR,
1940                                         "vxge_hw_vpath_reset failed for "
1941                                         "vpath:%d", i);
1942                                         return status;
1943                         }
1944                 }
1945         }
1946
1947         return status;
1948 }
1949
1950 /* close vpaths */
1951 void vxge_close_vpaths(struct vxgedev *vdev, int index)
1952 {
1953         struct vxge_vpath *vpath;
1954         int i;
1955
1956         for (i = index; i < vdev->no_of_vpath; i++) {
1957                 vpath = &vdev->vpaths[i];
1958
1959                 if (vpath->handle && vpath->is_open) {
1960                         vxge_hw_vpath_close(vpath->handle);
1961                         vdev->stats.vpaths_open--;
1962                 }
1963                 vpath->is_open = 0;
1964                 vpath->handle = NULL;
1965         }
1966 }
1967
1968 /* open vpaths */
1969 int vxge_open_vpaths(struct vxgedev *vdev)
1970 {
1971         struct vxge_hw_vpath_attr attr;
1972         enum vxge_hw_status status;
1973         struct vxge_vpath *vpath;
1974         u32 vp_id = 0;
1975         int i;
1976
1977         for (i = 0; i < vdev->no_of_vpath; i++) {
1978                 vpath = &vdev->vpaths[i];
1979
1980                 vxge_assert(vpath->is_configured);
1981                 attr.vp_id = vpath->device_id;
1982                 attr.fifo_attr.callback = vxge_xmit_compl;
1983                 attr.fifo_attr.txdl_term = vxge_tx_term;
1984                 attr.fifo_attr.per_txdl_space = sizeof(struct vxge_tx_priv);
1985                 attr.fifo_attr.userdata = &vpath->fifo;
1986
1987                 attr.ring_attr.callback = vxge_rx_1b_compl;
1988                 attr.ring_attr.rxd_init = vxge_rx_initial_replenish;
1989                 attr.ring_attr.rxd_term = vxge_rx_term;
1990                 attr.ring_attr.per_rxd_space = sizeof(struct vxge_rx_priv);
1991                 attr.ring_attr.userdata = &vpath->ring;
1992
1993                 vpath->ring.ndev = vdev->ndev;
1994                 vpath->ring.pdev = vdev->pdev;
1995                 status = vxge_hw_vpath_open(vdev->devh, &attr, &vpath->handle);
1996                 if (status == VXGE_HW_OK) {
1997                         vpath->fifo.handle =
1998                             (struct __vxge_hw_fifo *)attr.fifo_attr.userdata;
1999                         vpath->ring.handle =
2000                             (struct __vxge_hw_ring *)attr.ring_attr.userdata;
2001                         vpath->fifo.tx_steering_type =
2002                                 vdev->config.tx_steering_type;
2003                         vpath->fifo.ndev = vdev->ndev;
2004                         vpath->fifo.pdev = vdev->pdev;
2005                         if (vdev->config.tx_steering_type)
2006                                 vpath->fifo.txq =
2007                                         netdev_get_tx_queue(vdev->ndev, i);
2008                         else
2009                                 vpath->fifo.txq =
2010                                         netdev_get_tx_queue(vdev->ndev, 0);
2011                         vpath->fifo.indicate_max_pkts =
2012                                 vdev->config.fifo_indicate_max_pkts;
2013                         vpath->ring.rx_vector_no = 0;
2014                         vpath->ring.rx_csum = vdev->rx_csum;
2015                         vpath->is_open = 1;
2016                         vdev->vp_handles[i] = vpath->handle;
2017                         vpath->ring.gro_enable = vdev->config.gro_enable;
2018                         vpath->ring.vlan_tag_strip = vdev->vlan_tag_strip;
2019                         vdev->stats.vpaths_open++;
2020                 } else {
2021                         vdev->stats.vpath_open_fail++;
2022                         vxge_debug_init(VXGE_ERR,
2023                                 "%s: vpath: %d failed to open "
2024                                 "with status: %d",
2025                             vdev->ndev->name, vpath->device_id,
2026                                 status);
2027                         vxge_close_vpaths(vdev, 0);
2028                         return -EPERM;
2029                 }
2030
2031                 vp_id = vpath->handle->vpath->vp_id;
2032                 vdev->vpaths_deployed |= vxge_mBIT(vp_id);
2033         }
2034         return VXGE_HW_OK;
2035 }
2036
2037 /*
2038  *  vxge_isr_napi
2039  *  @irq: the irq of the device.
2040  *  @dev_id: a void pointer to the hldev structure of the Titan device
2041  *  @ptregs: pointer to the registers pushed on the stack.
2042  *
2043  *  This function is the ISR handler of the device when napi is enabled. It
2044  *  identifies the reason for the interrupt and calls the relevant service
2045  *  routines.
2046  */
2047 static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
2048 {
2049         struct net_device *dev;
2050         struct __vxge_hw_device *hldev;
2051         u64 reason;
2052         enum vxge_hw_status status;
2053         struct vxgedev *vdev = (struct vxgedev *) dev_id;;
2054
2055         vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__);
2056
2057         dev = vdev->ndev;
2058         hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
2059
2060         if (pci_channel_offline(vdev->pdev))
2061                 return IRQ_NONE;
2062
2063         if (unlikely(!is_vxge_card_up(vdev)))
2064                 return IRQ_NONE;
2065
2066         status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode,
2067                         &reason);
2068         if (status == VXGE_HW_OK) {
2069                 vxge_hw_device_mask_all(hldev);
2070
2071                 if (reason &
2072                         VXGE_HW_TITAN_GENERAL_INT_STATUS_VPATH_TRAFFIC_INT(
2073                         vdev->vpaths_deployed >>
2074                         (64 - VXGE_HW_MAX_VIRTUAL_PATHS))) {
2075
2076                         vxge_hw_device_clear_tx_rx(hldev);
2077                         napi_schedule(&vdev->napi);
2078                         vxge_debug_intr(VXGE_TRACE,
2079                                 "%s:%d  Exiting...", __func__, __LINE__);
2080                         return IRQ_HANDLED;
2081                 } else
2082                         vxge_hw_device_unmask_all(hldev);
2083         } else if (unlikely((status == VXGE_HW_ERR_VPATH) ||
2084                 (status == VXGE_HW_ERR_CRITICAL) ||
2085                 (status == VXGE_HW_ERR_FIFO))) {
2086                 vxge_hw_device_mask_all(hldev);
2087                 vxge_hw_device_flush_io(hldev);
2088                 return IRQ_HANDLED;
2089         } else if (unlikely(status == VXGE_HW_ERR_SLOT_FREEZE))
2090                 return IRQ_HANDLED;
2091
2092         vxge_debug_intr(VXGE_TRACE, "%s:%d  Exiting...", __func__, __LINE__);
2093         return IRQ_NONE;
2094 }
2095
2096 #ifdef CONFIG_PCI_MSI
2097
2098 static irqreturn_t
2099 vxge_tx_msix_handle(int irq, void *dev_id)
2100 {
2101         struct vxge_fifo *fifo = (struct vxge_fifo *)dev_id;
2102
2103         VXGE_COMPLETE_VPATH_TX(fifo);
2104
2105         return IRQ_HANDLED;
2106 }
2107
2108 static irqreturn_t
2109 vxge_rx_msix_napi_handle(int irq, void *dev_id)
2110 {
2111         struct vxge_ring *ring = (struct vxge_ring *)dev_id;
2112
2113         /* MSIX_IDX for Rx is 1 */
2114         vxge_hw_channel_msix_mask((struct __vxge_hw_channel *)ring->handle,
2115                                         ring->rx_vector_no);
2116
2117         napi_schedule(&ring->napi);
2118         return IRQ_HANDLED;
2119 }
2120
2121 static irqreturn_t
2122 vxge_alarm_msix_handle(int irq, void *dev_id)
2123 {
2124         int i;
2125         enum vxge_hw_status status;
2126         struct vxge_vpath *vpath = (struct vxge_vpath *)dev_id;
2127         struct vxgedev *vdev = vpath->vdev;
2128         int msix_id = (vpath->handle->vpath->vp_id *
2129                 VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
2130
2131         for (i = 0; i < vdev->no_of_vpath; i++) {
2132                 vxge_hw_vpath_msix_mask(vdev->vpaths[i].handle, msix_id);
2133
2134                 status = vxge_hw_vpath_alarm_process(vdev->vpaths[i].handle,
2135                         vdev->exec_mode);
2136                 if (status == VXGE_HW_OK) {
2137
2138                         vxge_hw_vpath_msix_unmask(vdev->vpaths[i].handle,
2139                                         msix_id);
2140                         continue;
2141                 }
2142                 vxge_debug_intr(VXGE_ERR,
2143                         "%s: vxge_hw_vpath_alarm_process failed %x ",
2144                         VXGE_DRIVER_NAME, status);
2145         }
2146         return IRQ_HANDLED;
2147 }
2148
2149 static int vxge_alloc_msix(struct vxgedev *vdev)
2150 {
2151         int j, i, ret = 0;
2152         int msix_intr_vect = 0, temp;
2153         vdev->intr_cnt = 0;
2154
2155 start:
2156         /* Tx/Rx MSIX Vectors count */
2157         vdev->intr_cnt = vdev->no_of_vpath * 2;
2158
2159         /* Alarm MSIX Vectors count */
2160         vdev->intr_cnt++;
2161
2162         vdev->entries = kcalloc(vdev->intr_cnt, sizeof(struct msix_entry),
2163                                 GFP_KERNEL);
2164         if (!vdev->entries) {
2165                 vxge_debug_init(VXGE_ERR,
2166                         "%s: memory allocation failed",
2167                         VXGE_DRIVER_NAME);
2168                 ret = -ENOMEM;
2169                 goto alloc_entries_failed;
2170         }
2171
2172         vdev->vxge_entries = kcalloc(vdev->intr_cnt,
2173                                      sizeof(struct vxge_msix_entry),
2174                                      GFP_KERNEL);
2175         if (!vdev->vxge_entries) {
2176                 vxge_debug_init(VXGE_ERR, "%s: memory allocation failed",
2177                         VXGE_DRIVER_NAME);
2178                 ret = -ENOMEM;
2179                 goto alloc_vxge_entries_failed;
2180         }
2181
2182         for (i = 0, j = 0; i < vdev->no_of_vpath; i++) {
2183
2184                 msix_intr_vect = i * VXGE_HW_VPATH_MSIX_ACTIVE;
2185
2186                 /* Initialize the fifo vector */
2187                 vdev->entries[j].entry = msix_intr_vect;
2188                 vdev->vxge_entries[j].entry = msix_intr_vect;
2189                 vdev->vxge_entries[j].in_use = 0;
2190                 j++;
2191
2192                 /* Initialize the ring vector */
2193                 vdev->entries[j].entry = msix_intr_vect + 1;
2194                 vdev->vxge_entries[j].entry = msix_intr_vect + 1;
2195                 vdev->vxge_entries[j].in_use = 0;
2196                 j++;
2197         }
2198
2199         /* Initialize the alarm vector */
2200         vdev->entries[j].entry = VXGE_ALARM_MSIX_ID;
2201         vdev->vxge_entries[j].entry = VXGE_ALARM_MSIX_ID;
2202         vdev->vxge_entries[j].in_use = 0;
2203
2204         ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt);
2205         if (ret > 0) {
2206                 vxge_debug_init(VXGE_ERR,
2207                         "%s: MSI-X enable failed for %d vectors, ret: %d",
2208                         VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
2209                 if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
2210                         ret = -ENODEV;
2211                         goto enable_msix_failed;
2212                 }
2213
2214                 kfree(vdev->entries);
2215                 kfree(vdev->vxge_entries);
2216                 vdev->entries = NULL;
2217                 vdev->vxge_entries = NULL;
2218                 /* Try with less no of vector by reducing no of vpaths count */
2219                 temp = (ret - 1)/2;
2220                 vxge_close_vpaths(vdev, temp);
2221                 vdev->no_of_vpath = temp;
2222                 goto start;
2223         } else if (ret < 0) {
2224                 ret = -ENODEV;
2225                 goto enable_msix_failed;
2226         }
2227         return 0;
2228
2229 enable_msix_failed:
2230         kfree(vdev->vxge_entries);
2231 alloc_vxge_entries_failed:
2232         kfree(vdev->entries);
2233 alloc_entries_failed:
2234         return ret;
2235 }
2236
2237 static int vxge_enable_msix(struct vxgedev *vdev)
2238 {
2239
2240         int i, ret = 0;
2241         /* 0 - Tx, 1 - Rx  */
2242         int tim_msix_id[4] = {0, 1, 0, 0};
2243
2244         vdev->intr_cnt = 0;
2245
2246         /* allocate msix vectors */
2247         ret = vxge_alloc_msix(vdev);
2248         if (!ret) {
2249                 for (i = 0; i < vdev->no_of_vpath; i++) {
2250                         struct vxge_vpath *vpath = &vdev->vpaths[i];
2251
2252                         /* If fifo or ring are not enabled, the MSIX vector for
2253                          * it should be set to 0.
2254                          */
2255                         vpath->ring.rx_vector_no = (vpath->device_id *
2256                                                 VXGE_HW_VPATH_MSIX_ACTIVE) + 1;
2257
2258                         vxge_hw_vpath_msix_set(vpath->handle, tim_msix_id,
2259                                                VXGE_ALARM_MSIX_ID);
2260                 }
2261         }
2262
2263         return ret;
2264 }
2265
2266 static void vxge_rem_msix_isr(struct vxgedev *vdev)
2267 {
2268         int intr_cnt;
2269
2270         for (intr_cnt = 0; intr_cnt < (vdev->no_of_vpath * 2 + 1);
2271                 intr_cnt++) {
2272                 if (vdev->vxge_entries[intr_cnt].in_use) {
2273                         synchronize_irq(vdev->entries[intr_cnt].vector);
2274                         free_irq(vdev->entries[intr_cnt].vector,
2275                                 vdev->vxge_entries[intr_cnt].arg);
2276                         vdev->vxge_entries[intr_cnt].in_use = 0;
2277                 }
2278         }
2279
2280         kfree(vdev->entries);
2281         kfree(vdev->vxge_entries);
2282         vdev->entries = NULL;
2283         vdev->vxge_entries = NULL;
2284
2285         if (vdev->config.intr_type == MSI_X)
2286                 pci_disable_msix(vdev->pdev);
2287 }
2288 #endif
2289
2290 static void vxge_rem_isr(struct vxgedev *vdev)
2291 {
2292         struct __vxge_hw_device  *hldev;
2293         hldev = (struct __vxge_hw_device  *) pci_get_drvdata(vdev->pdev);
2294
2295 #ifdef CONFIG_PCI_MSI
2296         if (vdev->config.intr_type == MSI_X) {
2297                 vxge_rem_msix_isr(vdev);
2298         } else
2299 #endif
2300         if (vdev->config.intr_type == INTA) {
2301                         synchronize_irq(vdev->pdev->irq);
2302                         free_irq(vdev->pdev->irq, vdev);
2303         }
2304 }
2305
2306 static int vxge_add_isr(struct vxgedev *vdev)
2307 {
2308         int ret = 0;
2309 #ifdef CONFIG_PCI_MSI
2310         int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
2311         int pci_fun = PCI_FUNC(vdev->pdev->devfn);
2312
2313         if (vdev->config.intr_type == MSI_X)
2314                 ret = vxge_enable_msix(vdev);
2315
2316         if (ret) {
2317                 vxge_debug_init(VXGE_ERR,
2318                         "%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME);
2319                 vxge_debug_init(VXGE_ERR,
2320                         "%s: Defaulting to INTA", VXGE_DRIVER_NAME);
2321                 vdev->config.intr_type = INTA;
2322         }
2323
2324         if (vdev->config.intr_type == MSI_X) {
2325                 for (intr_idx = 0;
2326                      intr_idx < (vdev->no_of_vpath *
2327                         VXGE_HW_VPATH_MSIX_ACTIVE); intr_idx++) {
2328
2329                         msix_idx = intr_idx % VXGE_HW_VPATH_MSIX_ACTIVE;
2330                         irq_req = 0;
2331
2332                         switch (msix_idx) {
2333                         case 0:
2334                                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2335                                 "%s:vxge:MSI-X %d - Tx - fn:%d vpath:%d",
2336                                         vdev->ndev->name,
2337                                         vdev->entries[intr_cnt].entry,
2338                                         pci_fun, vp_idx);
2339                                 ret = request_irq(
2340                                     vdev->entries[intr_cnt].vector,
2341                                         vxge_tx_msix_handle, 0,
2342                                         vdev->desc[intr_cnt],
2343                                         &vdev->vpaths[vp_idx].fifo);
2344                                         vdev->vxge_entries[intr_cnt].arg =
2345                                                 &vdev->vpaths[vp_idx].fifo;
2346                                 irq_req = 1;
2347                                 break;
2348                         case 1:
2349                                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2350                                 "%s:vxge:MSI-X %d - Rx - fn:%d vpath:%d",
2351                                         vdev->ndev->name,
2352                                         vdev->entries[intr_cnt].entry,
2353                                         pci_fun, vp_idx);
2354                                 ret = request_irq(
2355                                     vdev->entries[intr_cnt].vector,
2356                                         vxge_rx_msix_napi_handle,
2357                                         0,
2358                                         vdev->desc[intr_cnt],
2359                                         &vdev->vpaths[vp_idx].ring);
2360                                         vdev->vxge_entries[intr_cnt].arg =
2361                                                 &vdev->vpaths[vp_idx].ring;
2362                                 irq_req = 1;
2363                                 break;
2364                         }
2365
2366                         if (ret) {
2367                                 vxge_debug_init(VXGE_ERR,
2368                                         "%s: MSIX - %d  Registration failed",
2369                                         vdev->ndev->name, intr_cnt);
2370                                 vxge_rem_msix_isr(vdev);
2371                                 vdev->config.intr_type = INTA;
2372                                 vxge_debug_init(VXGE_ERR,
2373                                         "%s: Defaulting to INTA"
2374                                         , vdev->ndev->name);
2375                                         goto INTA_MODE;
2376                         }
2377
2378                         if (irq_req) {
2379                                 /* We requested for this msix interrupt */
2380                                 vdev->vxge_entries[intr_cnt].in_use = 1;
2381                                 msix_idx +=  vdev->vpaths[vp_idx].device_id *
2382                                         VXGE_HW_VPATH_MSIX_ACTIVE;
2383                                 vxge_hw_vpath_msix_unmask(
2384                                         vdev->vpaths[vp_idx].handle,
2385                                         msix_idx);
2386                                 intr_cnt++;
2387                         }
2388
2389                         /* Point to next vpath handler */
2390                         if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) &&
2391                             (vp_idx < (vdev->no_of_vpath - 1)))
2392                                 vp_idx++;
2393                 }
2394
2395                 intr_cnt = vdev->no_of_vpath * 2;
2396                 snprintf(vdev->desc[intr_cnt], VXGE_INTR_STRLEN,
2397                         "%s:vxge:MSI-X %d - Alarm - fn:%d",
2398                         vdev->ndev->name,
2399                         vdev->entries[intr_cnt].entry,
2400                         pci_fun);
2401                 /* For Alarm interrupts */
2402                 ret = request_irq(vdev->entries[intr_cnt].vector,
2403                                         vxge_alarm_msix_handle, 0,
2404                                         vdev->desc[intr_cnt],
2405                                         &vdev->vpaths[0]);
2406                 if (ret) {
2407                         vxge_debug_init(VXGE_ERR,
2408                                 "%s: MSIX - %d Registration failed",
2409                                 vdev->ndev->name, intr_cnt);
2410                         vxge_rem_msix_isr(vdev);
2411                         vdev->config.intr_type = INTA;
2412                         vxge_debug_init(VXGE_ERR,
2413                                 "%s: Defaulting to INTA",
2414                                 vdev->ndev->name);
2415                                 goto INTA_MODE;
2416                 }
2417
2418                 msix_idx = (vdev->vpaths[0].handle->vpath->vp_id *
2419                         VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
2420                 vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle,
2421                                         msix_idx);
2422                 vdev->vxge_entries[intr_cnt].in_use = 1;
2423                 vdev->vxge_entries[intr_cnt].arg = &vdev->vpaths[0];
2424         }
2425 INTA_MODE:
2426 #endif
2427
2428         if (vdev->config.intr_type == INTA) {
2429                 snprintf(vdev->desc[0], VXGE_INTR_STRLEN,
2430                         "%s:vxge:INTA", vdev->ndev->name);
2431                 vxge_hw_device_set_intr_type(vdev->devh,
2432                         VXGE_HW_INTR_MODE_IRQLINE);
2433                 vxge_hw_vpath_tti_ci_set(vdev->devh,
2434                         vdev->vpaths[0].device_id);
2435                 ret = request_irq((int) vdev->pdev->irq,
2436                         vxge_isr_napi,
2437                         IRQF_SHARED, vdev->desc[0], vdev);
2438                 if (ret) {
2439                         vxge_debug_init(VXGE_ERR,
2440                                 "%s %s-%d: ISR registration failed",
2441                                 VXGE_DRIVER_NAME, "IRQ", vdev->pdev->irq);
2442                         return -ENODEV;
2443                 }
2444                 vxge_debug_init(VXGE_TRACE,
2445                         "new %s-%d line allocated",
2446                         "IRQ", vdev->pdev->irq);
2447         }
2448
2449         return VXGE_HW_OK;
2450 }
2451
2452 static void vxge_poll_vp_reset(unsigned long data)
2453 {
2454         struct vxgedev *vdev = (struct vxgedev *)data;
2455         int i, j = 0;
2456
2457         for (i = 0; i < vdev->no_of_vpath; i++) {
2458                 if (test_bit(i, &vdev->vp_reset)) {
2459                         vxge_reset_vpath(vdev, i);
2460                         j++;
2461                 }
2462         }
2463         if (j && (vdev->config.intr_type != MSI_X)) {
2464                 vxge_hw_device_unmask_all(vdev->devh);
2465                 vxge_hw_device_flush_io(vdev->devh);
2466         }
2467
2468         mod_timer(&vdev->vp_reset_timer, jiffies + HZ / 2);
2469 }
2470
2471 static void vxge_poll_vp_lockup(unsigned long data)
2472 {
2473         struct vxgedev *vdev = (struct vxgedev *)data;
2474         enum vxge_hw_status status = VXGE_HW_OK;
2475         struct vxge_vpath *vpath;
2476         struct vxge_ring *ring;
2477         int i;
2478
2479         for (i = 0; i < vdev->no_of_vpath; i++) {
2480                 ring = &vdev->vpaths[i].ring;
2481                 /* Did this vpath received any packets */
2482                 if (ring->stats.prev_rx_frms == ring->stats.rx_frms) {
2483                         status = vxge_hw_vpath_check_leak(ring->handle);
2484
2485                         /* Did it received any packets last time */
2486                         if ((VXGE_HW_FAIL == status) &&
2487                                 (VXGE_HW_FAIL == ring->last_status)) {
2488
2489                                 /* schedule vpath reset */
2490                                 if (!test_and_set_bit(i, &vdev->vp_reset)) {
2491                                         vpath = &vdev->vpaths[i];
2492
2493                                         /* disable interrupts for this vpath */
2494                                         vxge_vpath_intr_disable(vdev, i);
2495
2496                                         /* stop the queue for this vpath */
2497                                         netif_tx_stop_queue(vpath->fifo.txq);
2498                                         continue;
2499                                 }
2500                         }
2501                 }
2502                 ring->stats.prev_rx_frms = ring->stats.rx_frms;
2503                 ring->last_status = status;
2504         }
2505
2506         /* Check every 1 milli second */
2507         mod_timer(&vdev->vp_lockup_timer, jiffies + HZ / 1000);
2508 }
2509
2510 /**
2511  * vxge_open
2512  * @dev: pointer to the device structure.
2513  *
2514  * This function is the open entry point of the driver. It mainly calls a
2515  * function to allocate Rx buffers and inserts them into the buffer
2516  * descriptors and then enables the Rx part of the NIC.
2517  * Return value: '0' on success and an appropriate (-)ve integer as
2518  * defined in errno.h file on failure.
2519  */
2520 int
2521 vxge_open(struct net_device *dev)
2522 {
2523         enum vxge_hw_status status;
2524         struct vxgedev *vdev;
2525         struct __vxge_hw_device *hldev;
2526         struct vxge_vpath *vpath;
2527         int ret = 0;
2528         int i;
2529         u64 val64, function_mode;
2530         vxge_debug_entryexit(VXGE_TRACE,
2531                 "%s: %s:%d", dev->name, __func__, __LINE__);
2532
2533         vdev = (struct vxgedev *)netdev_priv(dev);
2534         hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
2535         function_mode = vdev->config.device_hw_info.function_mode;
2536
2537         /* make sure you have link off by default every time Nic is
2538          * initialized */
2539         netif_carrier_off(dev);
2540
2541         /* Open VPATHs */
2542         status = vxge_open_vpaths(vdev);
2543         if (status != VXGE_HW_OK) {
2544                 vxge_debug_init(VXGE_ERR,
2545                         "%s: fatal: Vpath open failed", vdev->ndev->name);
2546                 ret = -EPERM;
2547                 goto out0;
2548         }
2549
2550         vdev->mtu = dev->mtu;
2551
2552         status = vxge_add_isr(vdev);
2553         if (status != VXGE_HW_OK) {
2554                 vxge_debug_init(VXGE_ERR,
2555                         "%s: fatal: ISR add failed", dev->name);
2556                 ret = -EPERM;
2557                 goto out1;
2558         }
2559
2560         if (vdev->config.intr_type != MSI_X) {
2561                 netif_napi_add(dev, &vdev->napi, vxge_poll_inta,
2562                         vdev->config.napi_weight);
2563                 napi_enable(&vdev->napi);
2564                 for (i = 0; i < vdev->no_of_vpath; i++) {
2565                         vpath = &vdev->vpaths[i];
2566                         vpath->ring.napi_p = &vdev->napi;
2567                 }
2568         } else {
2569                 for (i = 0; i < vdev->no_of_vpath; i++) {
2570                         vpath = &vdev->vpaths[i];
2571                         netif_napi_add(dev, &vpath->ring.napi,
2572                             vxge_poll_msix, vdev->config.napi_weight);
2573                         napi_enable(&vpath->ring.napi);
2574                         vpath->ring.napi_p = &vpath->ring.napi;
2575                 }
2576         }
2577
2578         /* configure RTH */
2579         if (vdev->config.rth_steering) {
2580                 status = vxge_rth_configure(vdev);
2581                 if (status != VXGE_HW_OK) {
2582                         vxge_debug_init(VXGE_ERR,
2583                                 "%s: fatal: RTH configuration failed",
2584                                 dev->name);
2585                         ret = -EPERM;
2586                         goto out2;
2587                 }
2588         }
2589
2590         for (i = 0; i < vdev->no_of_vpath; i++) {
2591                 vpath = &vdev->vpaths[i];
2592
2593                 /* set initial mtu before enabling the device */
2594                 status = vxge_hw_vpath_mtu_set(vpath->handle, vdev->mtu);
2595                 if (status != VXGE_HW_OK) {
2596                         vxge_debug_init(VXGE_ERR,
2597                                 "%s: fatal: can not set new MTU", dev->name);
2598                         ret = -EPERM;
2599                         goto out2;
2600                 }
2601         }
2602
2603         VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_TRACE, VXGE_COMPONENT_LL, vdev);
2604         vxge_debug_init(vdev->level_trace,
2605                 "%s: MTU is %d", vdev->ndev->name, vdev->mtu);
2606         VXGE_DEVICE_DEBUG_LEVEL_SET(VXGE_ERR, VXGE_COMPONENT_LL, vdev);
2607
2608         /* Restore the DA, VID table and also multicast and promiscuous mode
2609          * states
2610          */
2611         if (vdev->all_multi_flg) {
2612                 for (i = 0; i < vdev->no_of_vpath; i++) {
2613                         vpath = &vdev->vpaths[i];
2614                         vxge_restore_vpath_mac_addr(vpath);
2615                         vxge_restore_vpath_vid_table(vpath);
2616
2617                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
2618                         if (status != VXGE_HW_OK)
2619                                 vxge_debug_init(VXGE_ERR,
2620                                         "%s:%d Enabling multicast failed",
2621                                         __func__, __LINE__);
2622                 }
2623         }
2624
2625         /* Enable vpath to sniff all unicast/multicast traffic that not
2626          * addressed to them. We allow promiscous mode for PF only
2627          */
2628
2629         val64 = 0;
2630         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
2631                 val64 |= VXGE_HW_RXMAC_AUTHORIZE_ALL_ADDR_VP(i);
2632
2633         vxge_hw_mgmt_reg_write(vdev->devh,
2634                 vxge_hw_mgmt_reg_type_mrpcim,
2635                 0,
2636                 (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2637                         rxmac_authorize_all_addr),
2638                 val64);
2639
2640         vxge_hw_mgmt_reg_write(vdev->devh,
2641                 vxge_hw_mgmt_reg_type_mrpcim,
2642                 0,
2643                 (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2644                         rxmac_authorize_all_vid),
2645                 val64);
2646
2647         vxge_set_multicast(dev);
2648
2649         /* Enabling Bcast and mcast for all vpath */
2650         for (i = 0; i < vdev->no_of_vpath; i++) {
2651                 vpath = &vdev->vpaths[i];
2652                 status = vxge_hw_vpath_bcast_enable(vpath->handle);
2653                 if (status != VXGE_HW_OK)
2654                         vxge_debug_init(VXGE_ERR,
2655                                 "%s : Can not enable bcast for vpath "
2656                                 "id %d", dev->name, i);
2657                 if (vdev->config.addr_learn_en) {
2658                         status = vxge_hw_vpath_mcast_enable(vpath->handle);
2659                         if (status != VXGE_HW_OK)
2660                                 vxge_debug_init(VXGE_ERR,
2661                                         "%s : Can not enable mcast for vpath "
2662                                         "id %d", dev->name, i);
2663                 }
2664         }
2665
2666         vxge_hw_device_setpause_data(vdev->devh, 0,
2667                 vdev->config.tx_pause_enable,
2668                 vdev->config.rx_pause_enable);
2669
2670         if (vdev->vp_reset_timer.function == NULL)
2671                 vxge_os_timer(vdev->vp_reset_timer,
2672                         vxge_poll_vp_reset, vdev, (HZ/2));
2673
2674         if (vdev->vp_lockup_timer.function == NULL)
2675                 vxge_os_timer(vdev->vp_lockup_timer,
2676                         vxge_poll_vp_lockup, vdev, (HZ/2));
2677
2678         set_bit(__VXGE_STATE_CARD_UP, &vdev->state);
2679
2680         smp_wmb();
2681
2682         if (vxge_hw_device_link_state_get(vdev->devh) == VXGE_HW_LINK_UP) {
2683                 netif_carrier_on(vdev->ndev);
2684                 netdev_notice(vdev->ndev, "Link Up\n");
2685                 vdev->stats.link_up++;
2686         }
2687
2688         vxge_hw_device_intr_enable(vdev->devh);
2689
2690         smp_wmb();
2691
2692         for (i = 0; i < vdev->no_of_vpath; i++) {
2693                 vpath = &vdev->vpaths[i];
2694
2695                 vxge_hw_vpath_enable(vpath->handle);
2696                 smp_wmb();
2697                 vxge_hw_vpath_rx_doorbell_init(vpath->handle);
2698         }
2699
2700         netif_tx_start_all_queues(vdev->ndev);
2701         goto out0;
2702
2703 out2:
2704         vxge_rem_isr(vdev);
2705
2706         /* Disable napi */
2707         if (vdev->config.intr_type != MSI_X)
2708                 napi_disable(&vdev->napi);
2709         else {
2710                 for (i = 0; i < vdev->no_of_vpath; i++)
2711                         napi_disable(&vdev->vpaths[i].ring.napi);
2712         }
2713
2714 out1:
2715         vxge_close_vpaths(vdev, 0);
2716 out0:
2717         vxge_debug_entryexit(VXGE_TRACE,
2718                                 "%s: %s:%d  Exiting...",
2719                                 dev->name, __func__, __LINE__);
2720         return ret;
2721 }
2722
2723 /* Loop throught the mac address list and delete all the entries */
2724 void vxge_free_mac_add_list(struct vxge_vpath *vpath)
2725 {
2726
2727         struct list_head *entry, *next;
2728         if (list_empty(&vpath->mac_addr_list))
2729                 return;
2730
2731         list_for_each_safe(entry, next, &vpath->mac_addr_list) {
2732                 list_del(entry);
2733                 kfree((struct vxge_mac_addrs *)entry);
2734         }
2735 }
2736
2737 static void vxge_napi_del_all(struct vxgedev *vdev)
2738 {
2739         int i;
2740         if (vdev->config.intr_type != MSI_X)
2741                 netif_napi_del(&vdev->napi);
2742         else {
2743                 for (i = 0; i < vdev->no_of_vpath; i++)
2744                         netif_napi_del(&vdev->vpaths[i].ring.napi);
2745         }
2746 }
2747
2748 int do_vxge_close(struct net_device *dev, int do_io)
2749 {
2750         enum vxge_hw_status status;
2751         struct vxgedev *vdev;
2752         struct __vxge_hw_device *hldev;
2753         int i;
2754         u64 val64, vpath_vector;
2755         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
2756                 dev->name, __func__, __LINE__);
2757
2758         vdev = (struct vxgedev *)netdev_priv(dev);
2759         hldev = (struct __vxge_hw_device *) pci_get_drvdata(vdev->pdev);
2760
2761         if (unlikely(!is_vxge_card_up(vdev)))
2762                 return 0;
2763
2764         /* If vxge_handle_crit_err task is executing,
2765          * wait till it completes. */
2766         while (test_and_set_bit(__VXGE_STATE_RESET_CARD, &vdev->state))
2767                 msleep(50);
2768
2769         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
2770         if (do_io) {
2771                 /* Put the vpath back in normal mode */
2772                 vpath_vector = vxge_mBIT(vdev->vpaths[0].device_id);
2773                 status = vxge_hw_mgmt_reg_read(vdev->devh,
2774                                 vxge_hw_mgmt_reg_type_mrpcim,
2775                                 0,
2776                                 (ulong)offsetof(
2777                                         struct vxge_hw_mrpcim_reg,
2778                                         rts_mgr_cbasin_cfg),
2779                                 &val64);
2780
2781                 if (status == VXGE_HW_OK) {
2782                         val64 &= ~vpath_vector;
2783                         status = vxge_hw_mgmt_reg_write(vdev->devh,
2784                                         vxge_hw_mgmt_reg_type_mrpcim,
2785                                         0,
2786                                         (ulong)offsetof(
2787                                                 struct vxge_hw_mrpcim_reg,
2788                                                 rts_mgr_cbasin_cfg),
2789                                         val64);
2790                 }
2791
2792                 /* Remove the function 0 from promiscous mode */
2793                 vxge_hw_mgmt_reg_write(vdev->devh,
2794                         vxge_hw_mgmt_reg_type_mrpcim,
2795                         0,
2796                         (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2797                                 rxmac_authorize_all_addr),
2798                         0);
2799
2800                 vxge_hw_mgmt_reg_write(vdev->devh,
2801                         vxge_hw_mgmt_reg_type_mrpcim,
2802                         0,
2803                         (ulong)offsetof(struct vxge_hw_mrpcim_reg,
2804                                 rxmac_authorize_all_vid),
2805                         0);
2806
2807                 smp_wmb();
2808         }
2809         del_timer_sync(&vdev->vp_lockup_timer);
2810
2811         del_timer_sync(&vdev->vp_reset_timer);
2812
2813         /* Disable napi */
2814         if (vdev->config.intr_type != MSI_X)
2815                 napi_disable(&vdev->napi);
2816         else {
2817                 for (i = 0; i < vdev->no_of_vpath; i++)
2818                         napi_disable(&vdev->vpaths[i].ring.napi);
2819         }
2820
2821         netif_carrier_off(vdev->ndev);
2822         netdev_notice(vdev->ndev, "Link Down\n");
2823         netif_tx_stop_all_queues(vdev->ndev);
2824
2825         /* Note that at this point xmit() is stopped by upper layer */
2826         if (do_io)
2827                 vxge_hw_device_intr_disable(vdev->devh);
2828
2829         mdelay(1000);
2830
2831         vxge_rem_isr(vdev);
2832
2833         vxge_napi_del_all(vdev);
2834
2835         if (do_io)
2836                 vxge_reset_all_vpaths(vdev);
2837
2838         vxge_close_vpaths(vdev, 0);
2839
2840         vxge_debug_entryexit(VXGE_TRACE,
2841                 "%s: %s:%d  Exiting...", dev->name, __func__, __LINE__);
2842
2843         clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
2844
2845         return 0;
2846 }
2847
2848 /**
2849  * vxge_close
2850  * @dev: device pointer.
2851  *
2852  * This is the stop entry point of the driver. It needs to undo exactly
2853  * whatever was done by the open entry point, thus it's usually referred to
2854  * as the close function.Among other things this function mainly stops the
2855  * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
2856  * Return value: '0' on success and an appropriate (-)ve integer as
2857  * defined in errno.h file on failure.
2858  */
2859 int
2860 vxge_close(struct net_device *dev)
2861 {
2862         do_vxge_close(dev, 1);
2863         return 0;
2864 }
2865
2866 /**
2867  * vxge_change_mtu
2868  * @dev: net device pointer.
2869  * @new_mtu :the new MTU size for the device.
2870  *
2871  * A driver entry point to change MTU size for the device. Before changing
2872  * the MTU the device must be stopped.
2873  */
2874 static int vxge_change_mtu(struct net_device *dev, int new_mtu)
2875 {
2876         struct vxgedev *vdev = netdev_priv(dev);
2877
2878         vxge_debug_entryexit(vdev->level_trace,
2879                 "%s:%d", __func__, __LINE__);
2880         if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) {
2881                 vxge_debug_init(vdev->level_err,
2882                         "%s: mtu size is invalid", dev->name);
2883                 return -EPERM;
2884         }
2885
2886         /* check if device is down already */
2887         if (unlikely(!is_vxge_card_up(vdev))) {
2888                 /* just store new value, will use later on open() */
2889                 dev->mtu = new_mtu;
2890                 vxge_debug_init(vdev->level_err,
2891                         "%s", "device is down on MTU change");
2892                 return 0;
2893         }
2894
2895         vxge_debug_init(vdev->level_trace,
2896                 "trying to apply new MTU %d", new_mtu);
2897
2898         if (vxge_close(dev))
2899                 return -EIO;
2900
2901         dev->mtu = new_mtu;
2902         vdev->mtu = new_mtu;
2903
2904         if (vxge_open(dev))
2905                 return -EIO;
2906
2907         vxge_debug_init(vdev->level_trace,
2908                 "%s: MTU changed to %d", vdev->ndev->name, new_mtu);
2909
2910         vxge_debug_entryexit(vdev->level_trace,
2911                 "%s:%d  Exiting...", __func__, __LINE__);
2912
2913         return 0;
2914 }
2915
2916 /**
2917  * vxge_get_stats
2918  * @dev: pointer to the device structure
2919  *
2920  * Updates the device statistics structure. This function updates the device
2921  * statistics structure in the net_device structure and returns a pointer
2922  * to the same.
2923  */
2924 static struct net_device_stats *
2925 vxge_get_stats(struct net_device *dev)
2926 {
2927         struct vxgedev *vdev;
2928         struct net_device_stats *net_stats;
2929         int k;
2930
2931         vdev = netdev_priv(dev);
2932
2933         net_stats = &vdev->stats.net_stats;
2934
2935         memset(net_stats, 0, sizeof(struct net_device_stats));
2936
2937         for (k = 0; k < vdev->no_of_vpath; k++) {
2938                 net_stats->rx_packets += vdev->vpaths[k].ring.stats.rx_frms;
2939                 net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes;
2940                 net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors;
2941                 net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast;
2942                 net_stats->rx_dropped +=
2943                         vdev->vpaths[k].ring.stats.rx_dropped;
2944
2945                 net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms;
2946                 net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes;
2947                 net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors;
2948         }
2949
2950         return net_stats;
2951 }
2952
2953 /**
2954  * vxge_ioctl
2955  * @dev: Device pointer.
2956  * @ifr: An IOCTL specific structure, that can contain a pointer to
2957  *       a proprietary structure used to pass information to the driver.
2958  * @cmd: This is used to distinguish between the different commands that
2959  *       can be passed to the IOCTL functions.
2960  *
2961  * Entry point for the Ioctl.
2962  */
2963 static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2964 {
2965         return -EOPNOTSUPP;
2966 }
2967
2968 /**
2969  * vxge_tx_watchdog
2970  * @dev: pointer to net device structure
2971  *
2972  * Watchdog for transmit side.
2973  * This function is triggered if the Tx Queue is stopped
2974  * for a pre-defined amount of time when the Interface is still up.
2975  */
2976 static void
2977 vxge_tx_watchdog(struct net_device *dev)
2978 {
2979         struct vxgedev *vdev;
2980
2981         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
2982
2983         vdev = (struct vxgedev *)netdev_priv(dev);
2984
2985         vdev->cric_err_event = VXGE_HW_EVENT_RESET_START;
2986
2987         vxge_reset(vdev);
2988         vxge_debug_entryexit(VXGE_TRACE,
2989                 "%s:%d  Exiting...", __func__, __LINE__);
2990 }
2991
2992 /**
2993  * vxge_vlan_rx_register
2994  * @dev: net device pointer.
2995  * @grp: vlan group
2996  *
2997  * Vlan group registration
2998  */
2999 static void
3000 vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
3001 {
3002         struct vxgedev *vdev;
3003         struct vxge_vpath *vpath;
3004         int vp;
3005         u64 vid;
3006         enum vxge_hw_status status;
3007         int i;
3008
3009         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
3010
3011         vdev = (struct vxgedev *)netdev_priv(dev);
3012
3013         vpath = &vdev->vpaths[0];
3014         if ((NULL == grp) && (vpath->is_open)) {
3015                 /* Get the first vlan */
3016                 status = vxge_hw_vpath_vid_get(vpath->handle, &vid);
3017
3018                 while (status == VXGE_HW_OK) {
3019
3020                         /* Delete this vlan from the vid table */
3021                         for (vp = 0; vp < vdev->no_of_vpath; vp++) {
3022                                 vpath = &vdev->vpaths[vp];
3023                                 if (!vpath->is_open)
3024                                         continue;
3025
3026                                 vxge_hw_vpath_vid_delete(vpath->handle, vid);
3027                         }
3028
3029                         /* Get the next vlan to be deleted */
3030                         vpath = &vdev->vpaths[0];
3031                         status = vxge_hw_vpath_vid_get(vpath->handle, &vid);
3032                 }
3033         }
3034
3035         vdev->vlgrp = grp;
3036
3037         for (i = 0; i < vdev->no_of_vpath; i++) {
3038                 if (vdev->vpaths[i].is_configured)
3039                         vdev->vpaths[i].ring.vlgrp = grp;
3040         }
3041
3042         vxge_debug_entryexit(VXGE_TRACE,
3043                 "%s:%d  Exiting...", __func__, __LINE__);
3044 }
3045
3046 /**
3047  * vxge_vlan_rx_add_vid
3048  * @dev: net device pointer.
3049  * @vid: vid
3050  *
3051  * Add the vlan id to the devices vlan id table
3052  */
3053 static void
3054 vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
3055 {
3056         struct vxgedev *vdev;
3057         struct vxge_vpath *vpath;
3058         int vp_id;
3059
3060         vdev = (struct vxgedev *)netdev_priv(dev);
3061
3062         /* Add these vlan to the vid table */
3063         for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
3064                 vpath = &vdev->vpaths[vp_id];
3065                 if (!vpath->is_open)
3066                         continue;
3067                 vxge_hw_vpath_vid_add(vpath->handle, vid);
3068         }
3069 }
3070
3071 /**
3072  * vxge_vlan_rx_add_vid
3073  * @dev: net device pointer.
3074  * @vid: vid
3075  *
3076  * Remove the vlan id from the device's vlan id table
3077  */
3078 static void
3079 vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
3080 {
3081         struct vxgedev *vdev;
3082         struct vxge_vpath *vpath;
3083         int vp_id;
3084
3085         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
3086
3087         vdev = (struct vxgedev *)netdev_priv(dev);
3088
3089         vlan_group_set_device(vdev->vlgrp, vid, NULL);
3090
3091         /* Delete this vlan from the vid table */
3092         for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
3093                 vpath = &vdev->vpaths[vp_id];
3094                 if (!vpath->is_open)
3095                         continue;
3096                 vxge_hw_vpath_vid_delete(vpath->handle, vid);
3097         }
3098         vxge_debug_entryexit(VXGE_TRACE,
3099                 "%s:%d  Exiting...", __func__, __LINE__);
3100 }
3101
3102 static const struct net_device_ops vxge_netdev_ops = {
3103         .ndo_open               = vxge_open,
3104         .ndo_stop               = vxge_close,
3105         .ndo_get_stats          = vxge_get_stats,
3106         .ndo_start_xmit         = vxge_xmit,
3107         .ndo_validate_addr      = eth_validate_addr,
3108         .ndo_set_multicast_list = vxge_set_multicast,
3109
3110         .ndo_do_ioctl           = vxge_ioctl,
3111
3112         .ndo_set_mac_address    = vxge_set_mac_addr,
3113         .ndo_change_mtu         = vxge_change_mtu,
3114         .ndo_vlan_rx_register   = vxge_vlan_rx_register,
3115         .ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid,
3116         .ndo_vlan_rx_add_vid    = vxge_vlan_rx_add_vid,
3117
3118         .ndo_tx_timeout         = vxge_tx_watchdog,
3119 #ifdef CONFIG_NET_POLL_CONTROLLER
3120         .ndo_poll_controller    = vxge_netpoll,
3121 #endif
3122 };
3123
3124 int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
3125                                    struct vxge_config *config,
3126                                    int high_dma, int no_of_vpath,
3127                                    struct vxgedev **vdev_out)
3128 {
3129         struct net_device *ndev;
3130         enum vxge_hw_status status = VXGE_HW_OK;
3131         struct vxgedev *vdev;
3132         int ret = 0, no_of_queue = 1;
3133         u64 stat;
3134
3135         *vdev_out = NULL;
3136         if (config->tx_steering_type)
3137                 no_of_queue = no_of_vpath;
3138
3139         ndev = alloc_etherdev_mq(sizeof(struct vxgedev),
3140                         no_of_queue);
3141         if (ndev == NULL) {
3142                 vxge_debug_init(
3143                         vxge_hw_device_trace_level_get(hldev),
3144                 "%s : device allocation failed", __func__);
3145                 ret = -ENODEV;
3146                 goto _out0;
3147         }
3148
3149         vxge_debug_entryexit(
3150                 vxge_hw_device_trace_level_get(hldev),
3151                 "%s: %s:%d  Entering...",
3152                 ndev->name, __func__, __LINE__);
3153
3154         vdev = netdev_priv(ndev);
3155         memset(vdev, 0, sizeof(struct vxgedev));
3156
3157         vdev->ndev = ndev;
3158         vdev->devh = hldev;
3159         vdev->pdev = hldev->pdev;
3160         memcpy(&vdev->config, config, sizeof(struct vxge_config));
3161         vdev->rx_csum = 1;      /* Enable Rx CSUM by default. */
3162
3163         SET_NETDEV_DEV(ndev, &vdev->pdev->dev);
3164
3165         ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
3166                                 NETIF_F_HW_VLAN_FILTER;
3167         /*  Driver entry points */
3168         ndev->irq = vdev->pdev->irq;
3169         ndev->base_addr = (unsigned long) hldev->bar0;
3170
3171         ndev->netdev_ops = &vxge_netdev_ops;
3172
3173         ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT;
3174
3175         initialize_ethtool_ops(ndev);
3176
3177         /* Allocate memory for vpath */
3178         vdev->vpaths = kzalloc((sizeof(struct vxge_vpath)) *
3179                                 no_of_vpath, GFP_KERNEL);
3180         if (!vdev->vpaths) {
3181                 vxge_debug_init(VXGE_ERR,
3182                         "%s: vpath memory allocation failed",
3183                         vdev->ndev->name);
3184                 ret = -ENODEV;
3185                 goto _out1;
3186         }
3187
3188         ndev->features |= NETIF_F_SG;
3189
3190         ndev->features |= NETIF_F_HW_CSUM;
3191         vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3192                 "%s : checksuming enabled", __func__);
3193
3194         if (high_dma) {
3195                 ndev->features |= NETIF_F_HIGHDMA;
3196                 vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3197                         "%s : using High DMA", __func__);
3198         }
3199
3200         ndev->features |= NETIF_F_TSO | NETIF_F_TSO6;
3201
3202         if (vdev->config.gro_enable)
3203                 ndev->features |= NETIF_F_GRO;
3204
3205         if (register_netdev(ndev)) {
3206                 vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3207                         "%s: %s : device registration failed!",
3208                         ndev->name, __func__);
3209                 ret = -ENODEV;
3210                 goto _out2;
3211         }
3212
3213         /*  Set the factory defined MAC address initially */
3214         ndev->addr_len = ETH_ALEN;
3215
3216         /* Make Link state as off at this point, when the Link change
3217          * interrupt comes the state will be automatically changed to
3218          * the right state.
3219          */
3220         netif_carrier_off(ndev);
3221
3222         vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
3223                 "%s: Ethernet device registered",
3224                 ndev->name);
3225
3226         *vdev_out = vdev;
3227
3228         /* Resetting the Device stats */
3229         status = vxge_hw_mrpcim_stats_access(
3230                                 hldev,
3231                                 VXGE_HW_STATS_OP_CLEAR_ALL_STATS,
3232                                 0,
3233                                 0,
3234                                 &stat);
3235
3236         if (status == VXGE_HW_ERR_PRIVILAGED_OPEARATION)
3237                 vxge_debug_init(
3238                         vxge_hw_device_trace_level_get(hldev),
3239                         "%s: device stats clear returns"
3240                         "VXGE_HW_ERR_PRIVILAGED_OPEARATION", ndev->name);
3241
3242         vxge_debug_entryexit(vxge_hw_device_trace_level_get(hldev),
3243                 "%s: %s:%d  Exiting...",
3244                 ndev->name, __func__, __LINE__);
3245
3246         return ret;
3247 _out2:
3248         kfree(vdev->vpaths);
3249 _out1:
3250         free_netdev(ndev);
3251 _out0:
3252         return ret;
3253 }
3254
3255 /*
3256  * vxge_device_unregister
3257  *
3258  * This function will unregister and free network device
3259  */
3260 void
3261 vxge_device_unregister(struct __vxge_hw_device *hldev)
3262 {
3263         struct vxgedev *vdev;
3264         struct net_device *dev;
3265         char buf[IFNAMSIZ];
3266 #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
3267         (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
3268         u32 level_trace;
3269 #endif
3270
3271         dev = hldev->ndev;
3272         vdev = netdev_priv(dev);
3273 #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
3274         (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
3275         level_trace = vdev->level_trace;
3276 #endif
3277         vxge_debug_entryexit(level_trace,
3278                 "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
3279
3280         memcpy(buf, vdev->ndev->name, IFNAMSIZ);
3281
3282         /* in 2.6 will call stop() if device is up */
3283         unregister_netdev(dev);
3284
3285         flush_scheduled_work();
3286
3287         vxge_debug_init(level_trace, "%s: ethernet device unregistered", buf);
3288         vxge_debug_entryexit(level_trace,
3289                 "%s: %s:%d  Exiting...", buf, __func__, __LINE__);
3290 }
3291
3292 /*
3293  * vxge_callback_crit_err
3294  *
3295  * This function is called by the alarm handler in interrupt context.
3296  * Driver must analyze it based on the event type.
3297  */
3298 static void
3299 vxge_callback_crit_err(struct __vxge_hw_device *hldev,
3300                         enum vxge_hw_event type, u64 vp_id)
3301 {
3302         struct net_device *dev = hldev->ndev;
3303         struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
3304         struct vxge_vpath *vpath = NULL;
3305         int vpath_idx;
3306
3307         vxge_debug_entryexit(vdev->level_trace,
3308                 "%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
3309
3310         /* Note: This event type should be used for device wide
3311          * indications only - Serious errors, Slot freeze and critical errors
3312          */
3313         vdev->cric_err_event = type;
3314
3315         for (vpath_idx = 0; vpath_idx < vdev->no_of_vpath; vpath_idx++) {
3316                 vpath = &vdev->vpaths[vpath_idx];
3317                 if (vpath->device_id == vp_id)
3318                         break;
3319         }
3320
3321         if (!test_bit(__VXGE_STATE_RESET_CARD, &vdev->state)) {
3322                 if (type == VXGE_HW_EVENT_SLOT_FREEZE) {
3323                         vxge_debug_init(VXGE_ERR,
3324                                 "%s: Slot is frozen", vdev->ndev->name);
3325                 } else if (type == VXGE_HW_EVENT_SERR) {
3326                         vxge_debug_init(VXGE_ERR,
3327                                 "%s: Encountered Serious Error",
3328                                 vdev->ndev->name);
3329                 } else if (type == VXGE_HW_EVENT_CRITICAL_ERR)
3330                         vxge_debug_init(VXGE_ERR,
3331                                 "%s: Encountered Critical Error",
3332                                 vdev->ndev->name);
3333         }
3334
3335         if ((type == VXGE_HW_EVENT_SERR) ||
3336                 (type == VXGE_HW_EVENT_SLOT_FREEZE)) {
3337                 if (unlikely(vdev->exec_mode))
3338                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3339         } else if (type == VXGE_HW_EVENT_CRITICAL_ERR) {
3340                 vxge_hw_device_mask_all(hldev);
3341                 if (unlikely(vdev->exec_mode))
3342                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3343         } else if ((type == VXGE_HW_EVENT_FIFO_ERR) ||
3344                   (type == VXGE_HW_EVENT_VPATH_ERR)) {
3345
3346                 if (unlikely(vdev->exec_mode))
3347                         clear_bit(__VXGE_STATE_CARD_UP, &vdev->state);
3348                 else {
3349                         /* check if this vpath is already set for reset */
3350                         if (!test_and_set_bit(vpath_idx, &vdev->vp_reset)) {
3351
3352                                 /* disable interrupts for this vpath */
3353                                 vxge_vpath_intr_disable(vdev, vpath_idx);
3354
3355                                 /* stop the queue for this vpath */
3356                                 netif_tx_stop_queue(vpath->fifo.txq);
3357                         }
3358                 }
3359         }
3360
3361         vxge_debug_entryexit(vdev->level_trace,
3362                 "%s: %s:%d  Exiting...",
3363                 vdev->ndev->name, __func__, __LINE__);
3364 }
3365
3366 static void verify_bandwidth(void)
3367 {
3368         int i, band_width, total = 0, equal_priority = 0;
3369
3370         /* 1. If user enters 0 for some fifo, give equal priority to all */
3371         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3372                 if (bw_percentage[i] == 0) {
3373                         equal_priority = 1;
3374                         break;
3375                 }
3376         }
3377
3378         if (!equal_priority) {
3379                 /* 2. If sum exceeds 100, give equal priority to all */
3380                 for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3381                         if (bw_percentage[i] == 0xFF)
3382                                 break;
3383
3384                         total += bw_percentage[i];
3385                         if (total > VXGE_HW_VPATH_BANDWIDTH_MAX) {
3386                                 equal_priority = 1;
3387                                 break;
3388                         }
3389                 }
3390         }
3391
3392         if (!equal_priority) {
3393                 /* Is all the bandwidth consumed? */
3394                 if (total < VXGE_HW_VPATH_BANDWIDTH_MAX) {
3395                         if (i < VXGE_HW_MAX_VIRTUAL_PATHS) {
3396                                 /* Split rest of bw equally among next VPs*/
3397                                 band_width =
3398                                   (VXGE_HW_VPATH_BANDWIDTH_MAX  - total) /
3399                                         (VXGE_HW_MAX_VIRTUAL_PATHS - i);
3400                                 if (band_width < 2) /* min of 2% */
3401                                         equal_priority = 1;
3402                                 else {
3403                                         for (; i < VXGE_HW_MAX_VIRTUAL_PATHS;
3404                                                 i++)
3405                                                 bw_percentage[i] =
3406                                                         band_width;
3407                                 }
3408                         }
3409                 } else if (i < VXGE_HW_MAX_VIRTUAL_PATHS)
3410                         equal_priority = 1;
3411         }
3412
3413         if (equal_priority) {
3414                 vxge_debug_init(VXGE_ERR,
3415                         "%s: Assigning equal bandwidth to all the vpaths",
3416                         VXGE_DRIVER_NAME);
3417                 bw_percentage[0] = VXGE_HW_VPATH_BANDWIDTH_MAX /
3418                                         VXGE_HW_MAX_VIRTUAL_PATHS;
3419                 for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3420                         bw_percentage[i] = bw_percentage[0];
3421         }
3422 }
3423
3424 /*
3425  * Vpath configuration
3426  */
3427 static int __devinit vxge_config_vpaths(
3428                         struct vxge_hw_device_config *device_config,
3429                         u64 vpath_mask, struct vxge_config *config_param)
3430 {
3431         int i, no_of_vpaths = 0, default_no_vpath = 0, temp;
3432         u32 txdl_size, txdl_per_memblock;
3433
3434         temp = driver_config->vpath_per_dev;
3435         if ((driver_config->vpath_per_dev == VXGE_USE_DEFAULT) &&
3436                 (max_config_dev == VXGE_MAX_CONFIG_DEV)) {
3437                 /* No more CPU. Return vpath number as zero.*/
3438                 if (driver_config->g_no_cpus == -1)
3439                         return 0;
3440
3441                 if (!driver_config->g_no_cpus)
3442                         driver_config->g_no_cpus = num_online_cpus();
3443
3444                 driver_config->vpath_per_dev = driver_config->g_no_cpus >> 1;
3445                 if (!driver_config->vpath_per_dev)
3446                         driver_config->vpath_per_dev = 1;
3447
3448                 for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3449                         if (!vxge_bVALn(vpath_mask, i, 1))
3450                                 continue;
3451                         else
3452                                 default_no_vpath++;
3453                 if (default_no_vpath < driver_config->vpath_per_dev)
3454                         driver_config->vpath_per_dev = default_no_vpath;
3455
3456                 driver_config->g_no_cpus = driver_config->g_no_cpus -
3457                                 (driver_config->vpath_per_dev * 2);
3458                 if (driver_config->g_no_cpus <= 0)
3459                         driver_config->g_no_cpus = -1;
3460         }
3461
3462         if (driver_config->vpath_per_dev == 1) {
3463                 vxge_debug_ll_config(VXGE_TRACE,
3464                         "%s: Disable tx and rx steering, "
3465                         "as single vpath is configured", VXGE_DRIVER_NAME);
3466                 config_param->rth_steering = NO_STEERING;
3467                 config_param->tx_steering_type = NO_STEERING;
3468                 device_config->rth_en = 0;
3469         }
3470
3471         /* configure bandwidth */
3472         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
3473                 device_config->vp_config[i].min_bandwidth = bw_percentage[i];
3474
3475         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3476                 device_config->vp_config[i].vp_id = i;
3477                 device_config->vp_config[i].mtu = VXGE_HW_DEFAULT_MTU;
3478                 if (no_of_vpaths < driver_config->vpath_per_dev) {
3479                         if (!vxge_bVALn(vpath_mask, i, 1)) {
3480                                 vxge_debug_ll_config(VXGE_TRACE,
3481                                         "%s: vpath: %d is not available",
3482                                         VXGE_DRIVER_NAME, i);
3483                                 continue;
3484                         } else {
3485                                 vxge_debug_ll_config(VXGE_TRACE,
3486                                         "%s: vpath: %d available",
3487                                         VXGE_DRIVER_NAME, i);
3488                                 no_of_vpaths++;
3489                         }
3490                 } else {
3491                         vxge_debug_ll_config(VXGE_TRACE,
3492                                 "%s: vpath: %d is not configured, "
3493                                 "max_config_vpath exceeded",
3494                                 VXGE_DRIVER_NAME, i);
3495                         break;
3496                 }
3497
3498                 /* Configure Tx fifo's */
3499                 device_config->vp_config[i].fifo.enable =
3500                                                 VXGE_HW_FIFO_ENABLE;
3501                 device_config->vp_config[i].fifo.max_frags =
3502                                 MAX_SKB_FRAGS + 1;
3503                 device_config->vp_config[i].fifo.memblock_size =
3504                         VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE;
3505
3506                 txdl_size = device_config->vp_config[i].fifo.max_frags *
3507                                 sizeof(struct vxge_hw_fifo_txd);
3508                 txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size;
3509
3510                 device_config->vp_config[i].fifo.fifo_blocks =
3511                         ((VXGE_DEF_FIFO_LENGTH - 1) / txdl_per_memblock) + 1;
3512
3513                 device_config->vp_config[i].fifo.intr =
3514                                 VXGE_HW_FIFO_QUEUE_INTR_DISABLE;
3515
3516                 /* Configure tti properties */
3517                 device_config->vp_config[i].tti.intr_enable =
3518                                         VXGE_HW_TIM_INTR_ENABLE;
3519
3520                 device_config->vp_config[i].tti.btimer_val =
3521                         (VXGE_TTI_BTIMER_VAL * 1000) / 272;
3522
3523                 device_config->vp_config[i].tti.timer_ac_en =
3524                                 VXGE_HW_TIM_TIMER_AC_ENABLE;
3525
3526                 /* For msi-x with napi (each vector
3527                 has a handler of its own) -
3528                 Set CI to OFF for all vpaths */
3529                 device_config->vp_config[i].tti.timer_ci_en =
3530                         VXGE_HW_TIM_TIMER_CI_DISABLE;
3531
3532                 device_config->vp_config[i].tti.timer_ri_en =
3533                                 VXGE_HW_TIM_TIMER_RI_DISABLE;
3534
3535                 device_config->vp_config[i].tti.util_sel =
3536                         VXGE_HW_TIM_UTIL_SEL_LEGACY_TX_NET_UTIL;
3537
3538                 device_config->vp_config[i].tti.ltimer_val =
3539                         (VXGE_TTI_LTIMER_VAL * 1000) / 272;
3540
3541                 device_config->vp_config[i].tti.rtimer_val =
3542                         (VXGE_TTI_RTIMER_VAL * 1000) / 272;
3543
3544                 device_config->vp_config[i].tti.urange_a = TTI_TX_URANGE_A;
3545                 device_config->vp_config[i].tti.urange_b = TTI_TX_URANGE_B;
3546                 device_config->vp_config[i].tti.urange_c = TTI_TX_URANGE_C;
3547                 device_config->vp_config[i].tti.uec_a = TTI_TX_UFC_A;
3548                 device_config->vp_config[i].tti.uec_b = TTI_TX_UFC_B;
3549                 device_config->vp_config[i].tti.uec_c = TTI_TX_UFC_C;
3550                 device_config->vp_config[i].tti.uec_d = TTI_TX_UFC_D;
3551
3552                 /* Configure Rx rings */
3553                 device_config->vp_config[i].ring.enable  =
3554                                                 VXGE_HW_RING_ENABLE;
3555
3556                 device_config->vp_config[i].ring.ring_blocks  =
3557                                                 VXGE_HW_DEF_RING_BLOCKS;
3558                 device_config->vp_config[i].ring.buffer_mode =
3559                         VXGE_HW_RING_RXD_BUFFER_MODE_1;
3560                 device_config->vp_config[i].ring.rxds_limit  =
3561                                 VXGE_HW_DEF_RING_RXDS_LIMIT;
3562                 device_config->vp_config[i].ring.scatter_mode =
3563                                         VXGE_HW_RING_SCATTER_MODE_A;
3564
3565                 /* Configure rti properties */
3566                 device_config->vp_config[i].rti.intr_enable =
3567                                         VXGE_HW_TIM_INTR_ENABLE;
3568
3569                 device_config->vp_config[i].rti.btimer_val =
3570                         (VXGE_RTI_BTIMER_VAL * 1000)/272;
3571
3572                 device_config->vp_config[i].rti.timer_ac_en =
3573                                                 VXGE_HW_TIM_TIMER_AC_ENABLE;
3574
3575                 device_config->vp_config[i].rti.timer_ci_en =
3576                                                 VXGE_HW_TIM_TIMER_CI_DISABLE;
3577
3578                 device_config->vp_config[i].rti.timer_ri_en =
3579                                                 VXGE_HW_TIM_TIMER_RI_DISABLE;
3580
3581                 device_config->vp_config[i].rti.util_sel =
3582                                 VXGE_HW_TIM_UTIL_SEL_LEGACY_RX_NET_UTIL;
3583
3584                 device_config->vp_config[i].rti.urange_a =
3585                                                 RTI_RX_URANGE_A;
3586                 device_config->vp_config[i].rti.urange_b =
3587                                                 RTI_RX_URANGE_B;
3588                 device_config->vp_config[i].rti.urange_c =
3589                                                 RTI_RX_URANGE_C;
3590                 device_config->vp_config[i].rti.uec_a = RTI_RX_UFC_A;
3591                 device_config->vp_config[i].rti.uec_b = RTI_RX_UFC_B;
3592                 device_config->vp_config[i].rti.uec_c = RTI_RX_UFC_C;
3593                 device_config->vp_config[i].rti.uec_d = RTI_RX_UFC_D;
3594
3595                 device_config->vp_config[i].rti.rtimer_val =
3596                         (VXGE_RTI_RTIMER_VAL * 1000) / 272;
3597
3598                 device_config->vp_config[i].rti.ltimer_val =
3599                         (VXGE_RTI_LTIMER_VAL * 1000) / 272;
3600
3601                 device_config->vp_config[i].rpa_strip_vlan_tag =
3602                         vlan_tag_strip;
3603         }
3604
3605         driver_config->vpath_per_dev = temp;
3606         return no_of_vpaths;
3607 }
3608
3609 /* initialize device configuratrions */
3610 static void __devinit vxge_device_config_init(
3611                                 struct vxge_hw_device_config *device_config,
3612                                 int *intr_type)
3613 {
3614         /* Used for CQRQ/SRQ. */
3615         device_config->dma_blockpool_initial =
3616                         VXGE_HW_INITIAL_DMA_BLOCK_POOL_SIZE;
3617
3618         device_config->dma_blockpool_max =
3619                         VXGE_HW_MAX_DMA_BLOCK_POOL_SIZE;
3620
3621         if (max_mac_vpath > VXGE_MAX_MAC_ADDR_COUNT)
3622                 max_mac_vpath = VXGE_MAX_MAC_ADDR_COUNT;
3623
3624 #ifndef CONFIG_PCI_MSI
3625         vxge_debug_init(VXGE_ERR,
3626                 "%s: This Kernel does not support "
3627                 "MSI-X. Defaulting to INTA", VXGE_DRIVER_NAME);
3628         *intr_type = INTA;
3629 #endif
3630
3631         /* Configure whether MSI-X or IRQL. */
3632         switch (*intr_type) {
3633         case INTA:
3634                 device_config->intr_mode = VXGE_HW_INTR_MODE_IRQLINE;
3635                 break;
3636
3637         case MSI_X:
3638                 device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX;
3639                 break;
3640         }
3641         /* Timer period between device poll */
3642         device_config->device_poll_millis = VXGE_TIMER_DELAY;
3643
3644         /* Configure mac based steering. */
3645         device_config->rts_mac_en = addr_learn_en;
3646
3647         /* Configure Vpaths */
3648         device_config->rth_it_type = VXGE_HW_RTH_IT_TYPE_MULTI_IT;
3649
3650         vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ",
3651                         __func__);
3652         vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d",
3653                         device_config->dma_blockpool_initial);
3654         vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d",
3655                         device_config->dma_blockpool_max);
3656         vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d",
3657                         device_config->intr_mode);
3658         vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d",
3659                         device_config->device_poll_millis);
3660         vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d",
3661                         device_config->rts_mac_en);
3662         vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d",
3663                         device_config->rth_en);
3664         vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d",
3665                         device_config->rth_it_type);
3666 }
3667
3668 static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
3669 {
3670         int i;
3671
3672         vxge_debug_init(VXGE_TRACE,
3673                 "%s: %d Vpath(s) opened",
3674                 vdev->ndev->name, vdev->no_of_vpath);
3675
3676         switch (vdev->config.intr_type) {
3677         case INTA:
3678                 vxge_debug_init(VXGE_TRACE,
3679                         "%s: Interrupt type INTA", vdev->ndev->name);
3680                 break;
3681
3682         case MSI_X:
3683                 vxge_debug_init(VXGE_TRACE,
3684                         "%s: Interrupt type MSI-X", vdev->ndev->name);
3685                 break;
3686         }
3687
3688         if (vdev->config.rth_steering) {
3689                 vxge_debug_init(VXGE_TRACE,
3690                         "%s: RTH steering enabled for TCP_IPV4",
3691                         vdev->ndev->name);
3692         } else {
3693                 vxge_debug_init(VXGE_TRACE,
3694                         "%s: RTH steering disabled", vdev->ndev->name);
3695         }
3696
3697         switch (vdev->config.tx_steering_type) {
3698         case NO_STEERING:
3699                 vxge_debug_init(VXGE_TRACE,
3700                         "%s: Tx steering disabled", vdev->ndev->name);
3701                 break;
3702         case TX_PRIORITY_STEERING:
3703                 vxge_debug_init(VXGE_TRACE,
3704                         "%s: Unsupported tx steering option",
3705                         vdev->ndev->name);
3706                 vxge_debug_init(VXGE_TRACE,
3707                         "%s: Tx steering disabled", vdev->ndev->name);
3708                 vdev->config.tx_steering_type = 0;
3709                 break;
3710         case TX_VLAN_STEERING:
3711                 vxge_debug_init(VXGE_TRACE,
3712                         "%s: Unsupported tx steering option",
3713                         vdev->ndev->name);
3714                 vxge_debug_init(VXGE_TRACE,
3715                         "%s: Tx steering disabled", vdev->ndev->name);
3716                 vdev->config.tx_steering_type = 0;
3717                 break;
3718         case TX_MULTIQ_STEERING:
3719                 vxge_debug_init(VXGE_TRACE,
3720                         "%s: Tx multiqueue steering enabled",
3721                         vdev->ndev->name);
3722                 break;
3723         case TX_PORT_STEERING:
3724                 vxge_debug_init(VXGE_TRACE,
3725                         "%s: Tx port steering enabled",
3726                         vdev->ndev->name);
3727                 break;
3728         default:
3729                 vxge_debug_init(VXGE_ERR,
3730                         "%s: Unsupported tx steering type",
3731                         vdev->ndev->name);
3732                 vxge_debug_init(VXGE_TRACE,
3733                         "%s: Tx steering disabled", vdev->ndev->name);
3734                 vdev->config.tx_steering_type = 0;
3735         }
3736
3737         if (vdev->config.gro_enable) {
3738                 vxge_debug_init(VXGE_ERR,
3739                         "%s: Generic receive offload enabled",
3740                         vdev->ndev->name);
3741         } else
3742                 vxge_debug_init(VXGE_TRACE,
3743                         "%s: Generic receive offload disabled",
3744                         vdev->ndev->name);
3745
3746         if (vdev->config.addr_learn_en)
3747                 vxge_debug_init(VXGE_TRACE,
3748                         "%s: MAC Address learning enabled", vdev->ndev->name);
3749
3750         vxge_debug_init(VXGE_TRACE,
3751                 "%s: Rx doorbell mode enabled", vdev->ndev->name);
3752
3753         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
3754                 if (!vxge_bVALn(vpath_mask, i, 1))
3755                         continue;
3756                 vxge_debug_ll_config(VXGE_TRACE,
3757                         "%s: MTU size - %d", vdev->ndev->name,
3758                         ((struct __vxge_hw_device  *)(vdev->devh))->
3759                                 config.vp_config[i].mtu);
3760                 vxge_debug_init(VXGE_TRACE,
3761                         "%s: VLAN tag stripping %s", vdev->ndev->name,
3762                         ((struct __vxge_hw_device  *)(vdev->devh))->
3763                                 config.vp_config[i].rpa_strip_vlan_tag
3764                         ? "Enabled" : "Disabled");
3765                 vxge_debug_init(VXGE_TRACE,
3766                         "%s: Ring blocks : %d", vdev->ndev->name,
3767                         ((struct __vxge_hw_device  *)(vdev->devh))->
3768                                 config.vp_config[i].ring.ring_blocks);
3769                 vxge_debug_init(VXGE_TRACE,
3770                         "%s: Fifo blocks : %d", vdev->ndev->name,
3771                         ((struct __vxge_hw_device  *)(vdev->devh))->
3772                                 config.vp_config[i].fifo.fifo_blocks);
3773                 vxge_debug_ll_config(VXGE_TRACE,
3774                         "%s: Max frags : %d", vdev->ndev->name,
3775                         ((struct __vxge_hw_device  *)(vdev->devh))->
3776                                 config.vp_config[i].fifo.max_frags);
3777                 break;
3778         }
3779 }
3780
3781 #ifdef CONFIG_PM
3782 /**
3783  * vxge_pm_suspend - vxge power management suspend entry point
3784  *
3785  */
3786 static int vxge_pm_suspend(struct pci_dev *pdev, pm_message_t state)
3787 {
3788         return -ENOSYS;
3789 }
3790 /**
3791  * vxge_pm_resume - vxge power management resume entry point
3792  *
3793  */
3794 static int vxge_pm_resume(struct pci_dev *pdev)
3795 {
3796         return -ENOSYS;
3797 }
3798
3799 #endif
3800
3801 /**
3802  * vxge_io_error_detected - called when PCI error is detected
3803  * @pdev: Pointer to PCI device
3804  * @state: The current pci connection state
3805  *
3806  * This function is called after a PCI bus error affecting
3807  * this device has been detected.
3808  */
3809 static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev,
3810                                                 pci_channel_state_t state)
3811 {
3812         struct __vxge_hw_device  *hldev =
3813                 (struct __vxge_hw_device  *) pci_get_drvdata(pdev);
3814         struct net_device *netdev = hldev->ndev;
3815
3816         netif_device_detach(netdev);
3817
3818         if (state == pci_channel_io_perm_failure)
3819                 return PCI_ERS_RESULT_DISCONNECT;
3820
3821         if (netif_running(netdev)) {
3822                 /* Bring down the card, while avoiding PCI I/O */
3823                 do_vxge_close(netdev, 0);
3824         }
3825
3826         pci_disable_device(pdev);
3827
3828         return PCI_ERS_RESULT_NEED_RESET;
3829 }
3830
3831 /**
3832  * vxge_io_slot_reset - called after the pci bus has been reset.
3833  * @pdev: Pointer to PCI device
3834  *
3835  * Restart the card from scratch, as if from a cold-boot.
3836  * At this point, the card has exprienced a hard reset,
3837  * followed by fixups by BIOS, and has its config space
3838  * set up identically to what it was at cold boot.
3839  */
3840 static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
3841 {
3842         struct __vxge_hw_device  *hldev =
3843                 (struct __vxge_hw_device  *) pci_get_drvdata(pdev);
3844         struct net_device *netdev = hldev->ndev;
3845
3846         struct vxgedev *vdev = netdev_priv(netdev);
3847
3848         if (pci_enable_device(pdev)) {
3849                 netdev_err(netdev, "Cannot re-enable device after reset\n");
3850                 return PCI_ERS_RESULT_DISCONNECT;
3851         }
3852
3853         pci_set_master(pdev);
3854         vxge_reset(vdev);
3855
3856         return PCI_ERS_RESULT_RECOVERED;
3857 }
3858
3859 /**
3860  * vxge_io_resume - called when traffic can start flowing again.
3861  * @pdev: Pointer to PCI device
3862  *
3863  * This callback is called when the error recovery driver tells
3864  * us that its OK to resume normal operation.
3865  */
3866 static void vxge_io_resume(struct pci_dev *pdev)
3867 {
3868         struct __vxge_hw_device  *hldev =
3869                 (struct __vxge_hw_device  *) pci_get_drvdata(pdev);
3870         struct net_device *netdev = hldev->ndev;
3871
3872         if (netif_running(netdev)) {
3873                 if (vxge_open(netdev)) {
3874                         netdev_err(netdev,
3875                                    "Can't bring device back up after reset\n");
3876                         return;
3877                 }
3878         }
3879
3880         netif_device_attach(netdev);
3881 }
3882
3883 static inline u32 vxge_get_num_vfs(u64 function_mode)
3884 {
3885         u32 num_functions = 0;
3886
3887         switch (function_mode) {
3888         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
3889         case VXGE_HW_FUNCTION_MODE_SRIOV_8:
3890                 num_functions = 8;
3891                 break;
3892         case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
3893                 num_functions = 1;
3894                 break;
3895         case VXGE_HW_FUNCTION_MODE_SRIOV:
3896         case VXGE_HW_FUNCTION_MODE_MRIOV:
3897         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_17:
3898                 num_functions = 17;
3899                 break;
3900         case VXGE_HW_FUNCTION_MODE_SRIOV_4:
3901                 num_functions = 4;
3902                 break;
3903         case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION_2:
3904                 num_functions = 2;
3905                 break;
3906         case VXGE_HW_FUNCTION_MODE_MRIOV_8:
3907                 num_functions = 8; /* TODO */
3908                 break;
3909         }
3910         return num_functions;
3911 }
3912
3913 /**
3914  * vxge_probe
3915  * @pdev : structure containing the PCI related information of the device.
3916  * @pre: List of PCI devices supported by the driver listed in vxge_id_table.
3917  * Description:
3918  * This function is called when a new PCI device gets detected and initializes
3919  * it.
3920  * Return value:
3921  * returns 0 on success and negative on failure.
3922  *
3923  */
3924 static int __devinit
3925 vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
3926 {
3927         struct __vxge_hw_device  *hldev;
3928         enum vxge_hw_status status;
3929         int ret;
3930         int high_dma = 0;
3931         u64 vpath_mask = 0;
3932         struct vxgedev *vdev;
3933         struct vxge_config *ll_config = NULL;
3934         struct vxge_hw_device_config *device_config = NULL;
3935         struct vxge_hw_device_attr attr;
3936         int i, j, no_of_vpath = 0, max_vpath_supported = 0;
3937         u8 *macaddr;
3938         struct vxge_mac_addrs *entry;
3939         static int bus = -1, device = -1;
3940         u32 host_type;
3941         u8 new_device = 0;
3942         enum vxge_hw_status is_privileged;
3943         u32 function_mode;
3944         u32 num_vfs = 0;
3945
3946         vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
3947         attr.pdev = pdev;
3948
3949         /* In SRIOV-17 mode, functions of the same adapter
3950          * can be deployed on different buses */
3951         if ((!pdev->is_virtfn) && ((bus != pdev->bus->number) ||
3952                 (device != PCI_SLOT(pdev->devfn))))
3953                 new_device = 1;
3954
3955         bus = pdev->bus->number;
3956         device = PCI_SLOT(pdev->devfn);
3957
3958         if (new_device) {
3959                 if (driver_config->config_dev_cnt &&
3960                    (driver_config->config_dev_cnt !=
3961                         driver_config->total_dev_cnt))
3962                         vxge_debug_init(VXGE_ERR,
3963                                 "%s: Configured %d of %d devices",
3964                                 VXGE_DRIVER_NAME,
3965                                 driver_config->config_dev_cnt,
3966                                 driver_config->total_dev_cnt);
3967                 driver_config->config_dev_cnt = 0;
3968                 driver_config->total_dev_cnt = 0;
3969         }
3970         /* Now making the CPU based no of vpath calculation
3971          * applicable for individual functions as well.
3972          */
3973         driver_config->g_no_cpus = 0;
3974         driver_config->vpath_per_dev = max_config_vpath;
3975
3976         driver_config->total_dev_cnt++;
3977         if (++driver_config->config_dev_cnt > max_config_dev) {
3978                 ret = 0;
3979                 goto _exit0;
3980         }
3981
3982         device_config = kzalloc(sizeof(struct vxge_hw_device_config),
3983                 GFP_KERNEL);
3984         if (!device_config) {
3985                 ret = -ENOMEM;
3986                 vxge_debug_init(VXGE_ERR,
3987                         "device_config : malloc failed %s %d",
3988                         __FILE__, __LINE__);
3989                 goto _exit0;
3990         }
3991
3992         ll_config = kzalloc(sizeof(*ll_config), GFP_KERNEL);
3993         if (!ll_config) {
3994                 ret = -ENOMEM;
3995                 vxge_debug_init(VXGE_ERR,
3996                         "ll_config : malloc failed %s %d",
3997                         __FILE__, __LINE__);
3998                 goto _exit0;
3999         }
4000         ll_config->tx_steering_type = TX_MULTIQ_STEERING;
4001         ll_config->intr_type = MSI_X;
4002         ll_config->napi_weight = NEW_NAPI_WEIGHT;
4003         ll_config->rth_steering = RTH_STEERING;
4004
4005         /* get the default configuration parameters */
4006         vxge_hw_device_config_default_get(device_config);
4007
4008         /* initialize configuration parameters */
4009         vxge_device_config_init(device_config, &ll_config->intr_type);
4010
4011         ret = pci_enable_device(pdev);
4012         if (ret) {
4013                 vxge_debug_init(VXGE_ERR,
4014                         "%s : can not enable PCI device", __func__);
4015                 goto _exit0;
4016         }
4017
4018         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
4019                 vxge_debug_ll_config(VXGE_TRACE,
4020                         "%s : using 64bit DMA", __func__);
4021
4022                 high_dma = 1;
4023
4024                 if (pci_set_consistent_dma_mask(pdev,
4025                                                 DMA_BIT_MASK(64))) {
4026                         vxge_debug_init(VXGE_ERR,
4027                                 "%s : unable to obtain 64bit DMA for "
4028                                 "consistent allocations", __func__);
4029                         ret = -ENOMEM;
4030                         goto _exit1;
4031                 }
4032         } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
4033                 vxge_debug_ll_config(VXGE_TRACE,
4034                         "%s : using 32bit DMA", __func__);
4035         } else {
4036                 ret = -ENOMEM;
4037                 goto _exit1;
4038         }
4039
4040         if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) {
4041                 vxge_debug_init(VXGE_ERR,
4042                         "%s : request regions failed", __func__);
4043                 ret = -ENODEV;
4044                 goto _exit1;
4045         }
4046
4047         pci_set_master(pdev);
4048
4049         attr.bar0 = pci_ioremap_bar(pdev, 0);
4050         if (!attr.bar0) {
4051                 vxge_debug_init(VXGE_ERR,
4052                         "%s : cannot remap io memory bar0", __func__);
4053                 ret = -ENODEV;
4054                 goto _exit2;
4055         }
4056         vxge_debug_ll_config(VXGE_TRACE,
4057                 "pci ioremap bar0: %p:0x%llx",
4058                 attr.bar0,
4059                 (unsigned long long)pci_resource_start(pdev, 0));
4060
4061         status = vxge_hw_device_hw_info_get(attr.bar0,
4062                         &ll_config->device_hw_info);
4063         if (status != VXGE_HW_OK) {
4064                 vxge_debug_init(VXGE_ERR,
4065                         "%s: Reading of hardware info failed."
4066                         "Please try upgrading the firmware.", VXGE_DRIVER_NAME);
4067                 ret = -EINVAL;
4068                 goto _exit3;
4069         }
4070
4071         if (ll_config->device_hw_info.fw_version.major !=
4072                 VXGE_DRIVER_FW_VERSION_MAJOR) {
4073                 vxge_debug_init(VXGE_ERR,
4074                         "%s: Incorrect firmware version."
4075                         "Please upgrade the firmware to version 1.x.x",
4076                         VXGE_DRIVER_NAME);
4077                 ret = -EINVAL;
4078                 goto _exit3;
4079         }
4080
4081         vpath_mask = ll_config->device_hw_info.vpath_mask;
4082         if (vpath_mask == 0) {
4083                 vxge_debug_ll_config(VXGE_TRACE,
4084                         "%s: No vpaths available in device", VXGE_DRIVER_NAME);
4085                 ret = -EINVAL;
4086                 goto _exit3;
4087         }
4088
4089         vxge_debug_ll_config(VXGE_TRACE,
4090                 "%s:%d  Vpath mask = %llx", __func__, __LINE__,
4091                 (unsigned long long)vpath_mask);
4092
4093         function_mode = ll_config->device_hw_info.function_mode;
4094         host_type = ll_config->device_hw_info.host_type;
4095         is_privileged = __vxge_hw_device_is_privilaged(host_type,
4096                 ll_config->device_hw_info.func_id);
4097
4098         /* Check how many vpaths are available */
4099         for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
4100                 if (!((vpath_mask) & vxge_mBIT(i)))
4101                         continue;
4102                 max_vpath_supported++;
4103         }
4104
4105         if (new_device)
4106                 num_vfs = vxge_get_num_vfs(function_mode) - 1;
4107
4108         /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
4109         if (is_sriov(function_mode) && (max_config_dev > 1) &&
4110                 (ll_config->intr_type != INTA) &&
4111                 (is_privileged == VXGE_HW_OK)) {
4112                 ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs)
4113                         ? (max_config_dev - 1) : num_vfs);
4114                 if (ret)
4115                         vxge_debug_ll_config(VXGE_ERR,
4116                                 "Failed in enabling SRIOV mode: %d\n", ret);
4117         }
4118
4119         /*
4120          * Configure vpaths and get driver configured number of vpaths
4121          * which is less than or equal to the maximum vpaths per function.
4122          */
4123         no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config);
4124         if (!no_of_vpath) {
4125                 vxge_debug_ll_config(VXGE_ERR,
4126                         "%s: No more vpaths to configure", VXGE_DRIVER_NAME);
4127                 ret = 0;
4128                 goto _exit3;
4129         }
4130
4131         /* Setting driver callbacks */
4132         attr.uld_callbacks.link_up = vxge_callback_link_up;
4133         attr.uld_callbacks.link_down = vxge_callback_link_down;
4134         attr.uld_callbacks.crit_err = vxge_callback_crit_err;
4135
4136         status = vxge_hw_device_initialize(&hldev, &attr, device_config);
4137         if (status != VXGE_HW_OK) {
4138                 vxge_debug_init(VXGE_ERR,
4139                         "Failed to initialize device (%d)", status);
4140                         ret = -EINVAL;
4141                         goto _exit3;
4142         }
4143
4144         /* if FCS stripping is not disabled in MAC fail driver load */
4145         if (vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask) != VXGE_HW_OK) {
4146                 vxge_debug_init(VXGE_ERR,
4147                         "%s: FCS stripping is not disabled in MAC"
4148                         " failing driver load", VXGE_DRIVER_NAME);
4149                 ret = -EINVAL;
4150                 goto _exit4;
4151         }
4152
4153         vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
4154
4155         /* set private device info */
4156         pci_set_drvdata(pdev, hldev);
4157
4158         ll_config->gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
4159         ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
4160         ll_config->addr_learn_en = addr_learn_en;
4161         ll_config->rth_algorithm = RTH_ALG_JENKINS;
4162         ll_config->rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
4163         ll_config->rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
4164         ll_config->rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
4165         ll_config->rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
4166         ll_config->rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
4167         ll_config->rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
4168         ll_config->rth_bkt_sz = RTH_BUCKET_SIZE;
4169         ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
4170         ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
4171
4172         if (vxge_device_register(hldev, ll_config, high_dma, no_of_vpath,
4173                 &vdev)) {
4174                 ret = -EINVAL;
4175                 goto _exit4;
4176         }
4177
4178         vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
4179         VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
4180                 vxge_hw_device_trace_level_get(hldev));
4181
4182         /* set private HW device info */
4183         hldev->ndev = vdev->ndev;
4184         vdev->mtu = VXGE_HW_DEFAULT_MTU;
4185         vdev->bar0 = attr.bar0;
4186         vdev->max_vpath_supported = max_vpath_supported;
4187         vdev->no_of_vpath = no_of_vpath;
4188
4189         /* Virtual Path count */
4190         for (i = 0, j = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
4191                 if (!vxge_bVALn(vpath_mask, i, 1))
4192                         continue;
4193                 if (j >= vdev->no_of_vpath)
4194                         break;
4195
4196                 vdev->vpaths[j].is_configured = 1;
4197                 vdev->vpaths[j].device_id = i;
4198                 vdev->vpaths[j].ring.driver_id = j;
4199                 vdev->vpaths[j].vdev = vdev;
4200                 vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath;
4201                 memcpy((u8 *)vdev->vpaths[j].macaddr,
4202                                 ll_config->device_hw_info.mac_addrs[i],
4203                                 ETH_ALEN);
4204
4205                 /* Initialize the mac address list header */
4206                 INIT_LIST_HEAD(&vdev->vpaths[j].mac_addr_list);
4207
4208                 vdev->vpaths[j].mac_addr_cnt = 0;
4209                 vdev->vpaths[j].mcast_addr_cnt = 0;
4210                 j++;
4211         }
4212         vdev->exec_mode = VXGE_EXEC_MODE_DISABLE;
4213         vdev->max_config_port = max_config_port;
4214
4215         vdev->vlan_tag_strip = vlan_tag_strip;
4216
4217         /* map the hashing selector table to the configured vpaths */
4218         for (i = 0; i < vdev->no_of_vpath; i++)
4219                 vdev->vpath_selector[i] = vpath_selector[i];
4220
4221         macaddr = (u8 *)vdev->vpaths[0].macaddr;
4222
4223         ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
4224         ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
4225         ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
4226
4227         vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s",
4228                 vdev->ndev->name, ll_config->device_hw_info.serial_number);
4229
4230         vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s",
4231                 vdev->ndev->name, ll_config->device_hw_info.part_number);
4232
4233         vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
4234                 vdev->ndev->name, ll_config->device_hw_info.product_desc);
4235
4236         vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM",
4237                 vdev->ndev->name, macaddr);
4238
4239         vxge_debug_init(VXGE_TRACE, "%s: Link Width x%d",
4240                 vdev->ndev->name, vxge_hw_device_link_width_get(hldev));
4241
4242         vxge_debug_init(VXGE_TRACE,
4243                 "%s: Firmware version : %s Date : %s", vdev->ndev->name,
4244                 ll_config->device_hw_info.fw_version.version,
4245                 ll_config->device_hw_info.fw_date.date);
4246
4247         if (new_device) {
4248                 switch (ll_config->device_hw_info.function_mode) {
4249                 case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
4250                         vxge_debug_init(VXGE_TRACE,
4251                         "%s: Single Function Mode Enabled", vdev->ndev->name);
4252                 break;
4253                 case VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION:
4254                         vxge_debug_init(VXGE_TRACE,
4255                         "%s: Multi Function Mode Enabled", vdev->ndev->name);
4256                 break;
4257                 case VXGE_HW_FUNCTION_MODE_SRIOV:
4258                         vxge_debug_init(VXGE_TRACE,
4259                         "%s: Single Root IOV Mode Enabled", vdev->ndev->name);
4260                 break;
4261                 case VXGE_HW_FUNCTION_MODE_MRIOV:
4262                         vxge_debug_init(VXGE_TRACE,
4263                         "%s: Multi Root IOV Mode Enabled", vdev->ndev->name);
4264                 break;
4265                 }
4266         }
4267
4268         vxge_print_parm(vdev, vpath_mask);
4269
4270         /* Store the fw version for ethttool option */
4271         strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version);
4272         memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN);
4273         memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN);
4274
4275         /* Copy the station mac address to the list */
4276         for (i = 0; i < vdev->no_of_vpath; i++) {
4277                 entry = (struct vxge_mac_addrs *)
4278                                 kzalloc(sizeof(struct vxge_mac_addrs),
4279                                         GFP_KERNEL);
4280                 if (NULL == entry) {
4281                         vxge_debug_init(VXGE_ERR,
4282                                 "%s: mac_addr_list : memory allocation failed",
4283                                 vdev->ndev->name);
4284                         ret = -EPERM;
4285                         goto _exit5;
4286                 }
4287                 macaddr = (u8 *)&entry->macaddr;
4288                 memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
4289                 list_add(&entry->item, &vdev->vpaths[i].mac_addr_list);
4290                 vdev->vpaths[i].mac_addr_cnt = 1;
4291         }
4292
4293         kfree(device_config);
4294
4295         /*
4296          * INTA is shared in multi-function mode. This is unlike the INTA
4297          * implementation in MR mode, where each VH has its own INTA message.
4298          * - INTA is masked (disabled) as long as at least one function sets
4299          * its TITAN_MASK_ALL_INT.ALARM bit.
4300          * - INTA is unmasked (enabled) when all enabled functions have cleared
4301          * their own TITAN_MASK_ALL_INT.ALARM bit.
4302          * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up.
4303          * Though this driver leaves the top level interrupts unmasked while
4304          * leaving the required module interrupt bits masked on exit, there
4305          * could be a rougue driver around that does not follow this procedure
4306          * resulting in a failure to generate interrupts. The following code is
4307          * present to prevent such a failure.
4308          */
4309
4310         if (ll_config->device_hw_info.function_mode ==
4311                 VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
4312                 if (vdev->config.intr_type == INTA)
4313                         vxge_hw_device_unmask_all(hldev);
4314
4315         vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
4316                 vdev->ndev->name, __func__, __LINE__);
4317
4318         vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
4319         VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
4320                 vxge_hw_device_trace_level_get(hldev));
4321
4322         kfree(ll_config);
4323         return 0;
4324
4325 _exit5:
4326         for (i = 0; i < vdev->no_of_vpath; i++)
4327                 vxge_free_mac_add_list(&vdev->vpaths[i]);
4328
4329         vxge_device_unregister(hldev);
4330 _exit4:
4331         pci_disable_sriov(pdev);
4332         vxge_hw_device_terminate(hldev);
4333 _exit3:
4334         iounmap(attr.bar0);
4335 _exit2:
4336         pci_release_regions(pdev);
4337 _exit1:
4338         pci_disable_device(pdev);
4339 _exit0:
4340         kfree(ll_config);
4341         kfree(device_config);
4342         driver_config->config_dev_cnt--;
4343         pci_set_drvdata(pdev, NULL);
4344         return ret;
4345 }
4346
4347 /**
4348  * vxge_rem_nic - Free the PCI device
4349  * @pdev: structure containing the PCI related information of the device.
4350  * Description: This function is called by the Pci subsystem to release a
4351  * PCI device and free up all resource held up by the device.
4352  */
4353 static void __devexit
4354 vxge_remove(struct pci_dev *pdev)
4355 {
4356         struct __vxge_hw_device  *hldev;
4357         struct vxgedev *vdev = NULL;
4358         struct net_device *dev;
4359         int i = 0;
4360 #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
4361         (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
4362         u32 level_trace;
4363 #endif
4364
4365         hldev = (struct __vxge_hw_device  *) pci_get_drvdata(pdev);
4366
4367         if (hldev == NULL)
4368                 return;
4369         dev = hldev->ndev;
4370         vdev = netdev_priv(dev);
4371
4372 #if ((VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) || \
4373         (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK))
4374         level_trace = vdev->level_trace;
4375 #endif
4376         vxge_debug_entryexit(level_trace,
4377                 "%s:%d", __func__, __LINE__);
4378
4379         vxge_debug_init(level_trace,
4380                 "%s : removing PCI device...", __func__);
4381         vxge_device_unregister(hldev);
4382
4383         for (i = 0; i < vdev->no_of_vpath; i++) {
4384                 vxge_free_mac_add_list(&vdev->vpaths[i]);
4385                 vdev->vpaths[i].mcast_addr_cnt = 0;
4386                 vdev->vpaths[i].mac_addr_cnt = 0;
4387         }
4388
4389         kfree(vdev->vpaths);
4390
4391         iounmap(vdev->bar0);
4392
4393         pci_disable_sriov(pdev);
4394
4395         /* we are safe to free it now */
4396         free_netdev(dev);
4397
4398         vxge_debug_init(level_trace,
4399                 "%s:%d  Device unregistered", __func__, __LINE__);
4400
4401         vxge_hw_device_terminate(hldev);
4402
4403         pci_disable_device(pdev);
4404         pci_release_regions(pdev);
4405         pci_set_drvdata(pdev, NULL);
4406         vxge_debug_entryexit(level_trace,
4407                 "%s:%d  Exiting...", __func__, __LINE__);
4408 }
4409
4410 static struct pci_error_handlers vxge_err_handler = {
4411         .error_detected = vxge_io_error_detected,
4412         .slot_reset = vxge_io_slot_reset,
4413         .resume = vxge_io_resume,
4414 };
4415
4416 static struct pci_driver vxge_driver = {
4417         .name = VXGE_DRIVER_NAME,
4418         .id_table = vxge_id_table,
4419         .probe = vxge_probe,
4420         .remove = __devexit_p(vxge_remove),
4421 #ifdef CONFIG_PM
4422         .suspend = vxge_pm_suspend,
4423         .resume = vxge_pm_resume,
4424 #endif
4425         .err_handler = &vxge_err_handler,
4426 };
4427
4428 static int __init
4429 vxge_starter(void)
4430 {
4431         int ret = 0;
4432
4433         pr_info("Copyright(c) 2002-2010 Exar Corp.\n");
4434         pr_info("Driver version: %s\n", DRV_VERSION);
4435
4436         verify_bandwidth();
4437
4438         driver_config = kzalloc(sizeof(struct vxge_drv_config), GFP_KERNEL);
4439         if (!driver_config)
4440                 return -ENOMEM;
4441
4442         ret = pci_register_driver(&vxge_driver);
4443
4444         if (driver_config->config_dev_cnt &&
4445            (driver_config->config_dev_cnt != driver_config->total_dev_cnt))
4446                 vxge_debug_init(VXGE_ERR,
4447                         "%s: Configured %d of %d devices",
4448                         VXGE_DRIVER_NAME, driver_config->config_dev_cnt,
4449                         driver_config->total_dev_cnt);
4450
4451         if (ret)
4452                 kfree(driver_config);
4453
4454         return ret;
4455 }
4456
4457 static void __exit
4458 vxge_closer(void)
4459 {
4460         pci_unregister_driver(&vxge_driver);
4461         kfree(driver_config);
4462 }
4463 module_init(vxge_starter);
4464 module_exit(vxge_closer);