drivers/net/: Use the DMA_{64,32}BIT_MASK constants
[linux-2.6.git] / drivers / net / tlan.c
1 /*******************************************************************************
2  *
3  *  Linux ThunderLAN Driver
4  *
5  *  tlan.c
6  *  by James Banks
7  *
8  *  (C) 1997-1998 Caldera, Inc.
9  *  (C) 1998 James Banks
10  *  (C) 1999-2001 Torben Mathiasen
11  *  (C) 2002 Samuel Chessman
12  *
13  *  This software may be used and distributed according to the terms
14  *  of the GNU General Public License, incorporated herein by reference.
15  *
16  ** This file is best viewed/edited with columns>=132.
17  *
18  ** Useful (if not required) reading:
19  *
20  *              Texas Instruments, ThunderLAN Programmer's Guide,
21  *                      TI Literature Number SPWU013A
22  *                      available in PDF format from www.ti.com
23  *              Level One, LXT901 and LXT970 Data Sheets
24  *                      available in PDF format from www.level1.com
25  *              National Semiconductor, DP83840A Data Sheet
26  *                      available in PDF format from www.national.com
27  *              Microchip Technology, 24C01A/02A/04A Data Sheet
28  *                      available in PDF format from www.microchip.com
29  *
30  * Change History
31  *
32  *      Tigran Aivazian <tigran@sco.com>:       TLan_PciProbe() now uses
33  *                                              new PCI BIOS interface.
34  *      Alan Cox        <alan@redhat.com>:      Fixed the out of memory
35  *                                              handling.
36  *      
37  *      Torben Mathiasen <torben.mathiasen@compaq.com> New Maintainer!
38  *
39  *      v1.1 Dec 20, 1999    - Removed linux version checking
40  *                             Patch from Tigran Aivazian. 
41  *                           - v1.1 includes Alan's SMP updates.
42  *                           - We still have problems on SMP though,
43  *                             but I'm looking into that. 
44  *                      
45  *      v1.2 Jan 02, 2000    - Hopefully fixed the SMP deadlock.
46  *                           - Removed dependency of HZ being 100.
47  *                           - We now allow higher priority timers to 
48  *                             overwrite timers like TLAN_TIMER_ACTIVITY
49  *                             Patch from John Cagle <john.cagle@compaq.com>.
50  *                           - Fixed a few compiler warnings.
51  *
52  *      v1.3 Feb 04, 2000    - Fixed the remaining HZ issues.
53  *                           - Removed call to pci_present(). 
54  *                           - Removed SA_INTERRUPT flag from irq handler.
55  *                           - Added __init and __initdata to reduce resisdent 
56  *                             code size.
57  *                           - Driver now uses module_init/module_exit.
58  *                           - Rewrote init_module and tlan_probe to
59  *                             share a lot more code. We now use tlan_probe
60  *                             with builtin and module driver.
61  *                           - Driver ported to new net API. 
62  *                           - tlan.txt has been reworked to reflect current 
63  *                             driver (almost)
64  *                           - Other minor stuff
65  *
66  *      v1.4 Feb 10, 2000    - Updated with more changes required after Dave's
67  *                             network cleanup in 2.3.43pre7 (Tigran & myself)
68  *                           - Minor stuff.
69  *
70  *      v1.5 March 22, 2000  - Fixed another timer bug that would hang the driver
71  *                             if no cable/link were present.
72  *                           - Cosmetic changes.
73  *                           - TODO: Port completely to new PCI/DMA API
74  *                                   Auto-Neg fallback.
75  *
76  *      v1.6 April 04, 2000  - Fixed driver support for kernel-parameters. Haven't
77  *                             tested it though, as the kernel support is currently 
78  *                             broken (2.3.99p4p3).
79  *                           - Updated tlan.txt accordingly.
80  *                           - Adjusted minimum/maximum frame length.
81  *                           - There is now a TLAN website up at 
82  *                             http://tlan.kernel.dk
83  *
84  *      v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
85  *                             reports PHY information when used with Donald
86  *                             Beckers userspace MII diagnostics utility.
87  *
88  *      v1.8 April 23, 2000  - Fixed support for forced speed/duplex settings.
89  *                           - Added link information to Auto-Neg and forced
90  *                             modes. When NIC operates with auto-neg the driver
91  *                             will report Link speed & duplex modes as well as
92  *                             link partner abilities. When forced link is used,
93  *                             the driver will report status of the established
94  *                             link.
95  *                             Please read tlan.txt for additional information. 
96  *                           - Removed call to check_region(), and used 
97  *                             return value of request_region() instead.
98  *      
99  *      v1.8a May 28, 2000   - Minor updates.
100  *
101  *      v1.9 July 25, 2000   - Fixed a few remaining Full-Duplex issues.
102  *                           - Updated with timer fixes from Andrew Morton.
103  *                           - Fixed module race in TLan_Open.
104  *                           - Added routine to monitor PHY status.
105  *                           - Added activity led support for Proliant devices.
106  *
107  *      v1.10 Aug 30, 2000   - Added support for EISA based tlan controllers 
108  *                             like the Compaq NetFlex3/E. 
109  *                           - Rewrote tlan_probe to better handle multiple
110  *                             bus probes. Probing and device setup is now
111  *                             done through TLan_Probe and TLan_init_one. Actual
112  *                             hardware probe is done with kernel API and 
113  *                             TLan_EisaProbe.
114  *                           - Adjusted debug information for probing.
115  *                           - Fixed bug that would cause general debug information 
116  *                             to be printed after driver removal. 
117  *                           - Added transmit timeout handling.
118  *                           - Fixed OOM return values in tlan_probe. 
119  *                           - Fixed possible mem leak in tlan_exit 
120  *                             (now tlan_remove_one).
121  *                           - Fixed timer bug in TLan_phyMonitor.
122  *                           - This driver version is alpha quality, please
123  *                             send me any bug issues you may encounter.
124  *
125  *      v1.11 Aug 31, 2000   - Do not try to register irq 0 if no irq line was 
126  *                             set for EISA cards.
127  *                           - Added support for NetFlex3/E with nibble-rate
128  *                             10Base-T PHY. This is untestet as I haven't got
129  *                             one of these cards.
130  *                           - Fixed timer being added twice.
131  *                           - Disabled PhyMonitoring by default as this is
132  *                             work in progress. Define MONITOR to enable it.
133  *                           - Now we don't display link info with PHYs that
134  *                             doesn't support it (level1).
135  *                           - Incresed tx_timeout beacuse of auto-neg.
136  *                           - Adjusted timers for forced speeds.
137  *
138  *      v1.12 Oct 12, 2000   - Minor fixes (memleak, init, etc.)
139  *
140  *      v1.13 Nov 28, 2000   - Stop flooding console with auto-neg issues
141  *                             when link can't be established.
142  *                           - Added the bbuf option as a kernel parameter.
143  *                           - Fixed ioaddr probe bug.
144  *                           - Fixed stupid deadlock with MII interrupts.
145  *                           - Added support for speed/duplex selection with 
146  *                             multiple nics.
147  *                           - Added partly fix for TX Channel lockup with
148  *                             TLAN v1.0 silicon. This needs to be investigated
149  *                             further.
150  *
151  *      v1.14 Dec 16, 2000   - Added support for servicing multiple frames per.
152  *                             interrupt. Thanks goes to
153  *                             Adam Keys <adam@ti.com>
154  *                             Denis Beaudoin <dbeaudoin@ti.com>
155  *                             for providing the patch.
156  *                           - Fixed auto-neg output when using multiple
157  *                             adapters.
158  *                           - Converted to use new taskq interface.
159  *
160  *      v1.14a Jan 6, 2001   - Minor adjustments (spinlocks, etc.)
161  *
162  *      Samuel Chessman <chessman@tux.org> New Maintainer!
163  *
164  *      v1.15 Apr 4, 2002    - Correct operation when aui=1 to be
165  *                             10T half duplex no loopback
166  *                             Thanks to Gunnar Eikman
167  *******************************************************************************/
168
169 #include <linux/module.h>
170 #include <linux/init.h>
171 #include <linux/ioport.h>
172 #include <linux/eisa.h>
173 #include <linux/pci.h>
174 #include <linux/dma-mapping.h>
175 #include <linux/netdevice.h>
176 #include <linux/etherdevice.h>
177 #include <linux/delay.h>
178 #include <linux/spinlock.h>
179 #include <linux/workqueue.h>
180 #include <linux/mii.h>
181
182 #include "tlan.h"
183
184 typedef u32 (TLanIntVectorFunc)( struct net_device *, u16 );
185
186
187 /* For removing EISA devices */
188 static  struct net_device       *TLan_Eisa_Devices;
189
190 static  int             TLanDevicesInstalled;
191
192 /* Set speed, duplex and aui settings */
193 static  int aui[MAX_TLAN_BOARDS];
194 static  int duplex[MAX_TLAN_BOARDS];
195 static  int speed[MAX_TLAN_BOARDS];
196 static  int boards_found;
197 module_param_array(aui, int, NULL, 0);
198 module_param_array(duplex, int, NULL, 0);
199 module_param_array(speed, int, NULL, 0);
200 MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
201 MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
202 MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
203
204 MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
205 MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
206 MODULE_LICENSE("GPL");
207
208
209 /* Define this to enable Link beat monitoring */
210 #undef MONITOR
211
212 /* Turn on debugging. See Documentation/networking/tlan.txt for details */
213 static  int             debug;
214 module_param(debug, int, 0);
215 MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
216
217 static  int             bbuf;
218 module_param(bbuf, int, 0);
219 MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
220
221 static  u8              *TLanPadBuffer;
222 static  dma_addr_t      TLanPadBufferDMA;
223 static  char            TLanSignature[] = "TLAN";
224 static  const char tlan_banner[] = "ThunderLAN driver v1.15\n";
225 static  int tlan_have_pci;
226 static  int tlan_have_eisa;
227
228 static const char *media[] = {
229         "10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ", 
230         "100baseTx-FD", "100baseT4", NULL
231 };
232
233 static struct board {
234         const char      *deviceLabel;
235         u32             flags;
236         u16             addrOfs;
237 } board_info[] = {
238         { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
239         { "Compaq Netelligent 10/100 TX PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
240         { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
241         { "Compaq NetFlex-3/P", TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
242         { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
243         { "Compaq Netelligent Integrated 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
244         { "Compaq Netelligent Dual 10/100 TX PCI UTP", TLAN_ADAPTER_NONE, 0x83 },
245         { "Compaq Netelligent 10/100 TX Embedded UTP", TLAN_ADAPTER_NONE, 0x83 },
246         { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
247         { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
248         { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
249         { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
250         { "Compaq Netelligent 10 T/2 PCI UTP/Coax", TLAN_ADAPTER_NONE, 0x83 },
251         { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED |     /* EISA card */
252                                 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, 
253         { "Compaq NetFlex-3/E", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
254 };
255
256 static struct pci_device_id tlan_pci_tbl[] = {
257         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
258                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
259         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
260                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
261         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
262                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
263         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
264                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
265         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
266                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
267         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
268                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
269         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
270                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
271         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
272                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
273         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
274                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
275         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
276                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
277         { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
278                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
279         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
280                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
281         { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
282                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
283         { 0,}
284 };
285 MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);         
286
287 static void     TLan_EisaProbe( void );
288 static void     TLan_Eisa_Cleanup( void );
289 static int      TLan_Init( struct net_device * );
290 static int      TLan_Open( struct net_device *dev );
291 static int      TLan_StartTx( struct sk_buff *, struct net_device *);
292 static irqreturn_t TLan_HandleInterrupt( int, void *, struct pt_regs *);
293 static int      TLan_Close( struct net_device *);
294 static struct   net_device_stats *TLan_GetStats( struct net_device *);
295 static void     TLan_SetMulticastList( struct net_device *);
296 static int      TLan_ioctl( struct net_device *dev, struct ifreq *rq, int cmd);
297 static int      TLan_probe1( struct pci_dev *pdev, long ioaddr, int irq, int rev, const struct pci_device_id *ent);
298 static void     TLan_tx_timeout( struct net_device *dev);
299 static int      tlan_init_one( struct pci_dev *pdev, const struct pci_device_id *ent);
300
301 static u32      TLan_HandleInvalid( struct net_device *, u16 );
302 static u32      TLan_HandleTxEOF( struct net_device *, u16 );
303 static u32      TLan_HandleStatOverflow( struct net_device *, u16 );
304 static u32      TLan_HandleRxEOF( struct net_device *, u16 );
305 static u32      TLan_HandleDummy( struct net_device *, u16 );
306 static u32      TLan_HandleTxEOC( struct net_device *, u16 );
307 static u32      TLan_HandleStatusCheck( struct net_device *, u16 );
308 static u32      TLan_HandleRxEOC( struct net_device *, u16 );
309
310 static void     TLan_Timer( unsigned long );
311
312 static void     TLan_ResetLists( struct net_device * );
313 static void     TLan_FreeLists( struct net_device * );
314 static void     TLan_PrintDio( u16 );
315 static void     TLan_PrintList( TLanList *, char *, int );
316 static void     TLan_ReadAndClearStats( struct net_device *, int );
317 static void     TLan_ResetAdapter( struct net_device * );
318 static void     TLan_FinishReset( struct net_device * );
319 static void     TLan_SetMac( struct net_device *, int areg, char *mac );
320
321 static void     TLan_PhyPrint( struct net_device * );
322 static void     TLan_PhyDetect( struct net_device * );
323 static void     TLan_PhyPowerDown( struct net_device * );
324 static void     TLan_PhyPowerUp( struct net_device * );
325 static void     TLan_PhyReset( struct net_device * );
326 static void     TLan_PhyStartLink( struct net_device * );
327 static void     TLan_PhyFinishAutoNeg( struct net_device * );
328 #ifdef MONITOR
329 static void     TLan_PhyMonitor( struct net_device * );
330 #endif
331
332 /*
333 static int      TLan_PhyNop( struct net_device * );
334 static int      TLan_PhyInternalCheck( struct net_device * );
335 static int      TLan_PhyInternalService( struct net_device * );
336 static int      TLan_PhyDp83840aCheck( struct net_device * );
337 */
338
339 static int      TLan_MiiReadReg( struct net_device *, u16, u16, u16 * );
340 static void     TLan_MiiSendData( u16, u32, unsigned );
341 static void     TLan_MiiSync( u16 );
342 static void     TLan_MiiWriteReg( struct net_device *, u16, u16, u16 );
343
344 static void     TLan_EeSendStart( u16 );
345 static int      TLan_EeSendByte( u16, u8, int );
346 static void     TLan_EeReceiveByte( u16, u8 *, int );
347 static int      TLan_EeReadByte( struct net_device *, u8, u8 * );
348
349
350 static void 
351 TLan_StoreSKB( struct tlan_list_tag *tag, struct sk_buff *skb)
352 {
353         unsigned long addr = (unsigned long)skb;
354         tag->buffer[9].address = (u32)addr;
355         addr >>= 31;    /* >>= 32 is undefined for 32bit arch, stupid C */
356         addr >>= 1;
357         tag->buffer[8].address = (u32)addr;
358 }
359
360 static struct sk_buff *
361 TLan_GetSKB( struct tlan_list_tag *tag)
362 {
363         unsigned long addr = tag->buffer[8].address;
364         addr <<= 31;
365         addr <<= 1;
366         addr |= tag->buffer[9].address;
367         return (struct sk_buff *) addr;
368 }
369
370
371 static TLanIntVectorFunc *TLanIntVector[TLAN_INT_NUMBER_OF_INTS] = {
372         TLan_HandleInvalid,
373         TLan_HandleTxEOF,
374         TLan_HandleStatOverflow,
375         TLan_HandleRxEOF,
376         TLan_HandleDummy,
377         TLan_HandleTxEOC,
378         TLan_HandleStatusCheck,
379         TLan_HandleRxEOC
380 };
381
382 static inline void
383 TLan_SetTimer( struct net_device *dev, u32 ticks, u32 type )
384 {
385         TLanPrivateInfo *priv = netdev_priv(dev);
386         unsigned long flags = 0;
387         
388         if (!in_irq())
389                 spin_lock_irqsave(&priv->lock, flags);
390         if ( priv->timer.function != NULL &&
391                 priv->timerType != TLAN_TIMER_ACTIVITY ) { 
392                 if (!in_irq())
393                         spin_unlock_irqrestore(&priv->lock, flags);
394                 return;
395         }
396         priv->timer.function = &TLan_Timer;
397         if (!in_irq())
398                 spin_unlock_irqrestore(&priv->lock, flags);
399
400         priv->timer.data = (unsigned long) dev;
401         priv->timerSetAt = jiffies;
402         priv->timerType = type;
403         mod_timer(&priv->timer, jiffies + ticks);
404         
405 } /* TLan_SetTimer */
406
407
408 /*****************************************************************************
409 ******************************************************************************
410
411         ThunderLAN Driver Primary Functions
412
413         These functions are more or less common to all Linux network drivers.
414
415 ******************************************************************************
416 *****************************************************************************/
417
418
419
420
421
422         /***************************************************************
423          *      tlan_remove_one
424          *
425          *      Returns:
426          *              Nothing
427          *      Parms:
428          *              None
429          *
430          *      Goes through the TLanDevices list and frees the device
431          *      structs and memory associated with each device (lists
432          *      and buffers).  It also ureserves the IO port regions
433          *      associated with this device.
434          *
435          **************************************************************/
436
437
438 static void __devexit tlan_remove_one( struct pci_dev *pdev)
439 {
440         struct net_device *dev = pci_get_drvdata( pdev );
441         TLanPrivateInfo *priv = netdev_priv(dev);
442         
443         unregister_netdev( dev );
444
445         if ( priv->dmaStorage ) {
446                 pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
447         }
448
449 #ifdef CONFIG_PCI
450         pci_release_regions(pdev);
451 #endif
452         
453         free_netdev( dev );
454                 
455         pci_set_drvdata( pdev, NULL );
456
457
458 static struct pci_driver tlan_driver = {
459         .name           = "tlan",
460         .id_table       = tlan_pci_tbl,
461         .probe          = tlan_init_one,
462         .remove         = __devexit_p(tlan_remove_one), 
463 };
464
465 static int __init tlan_probe(void)
466 {
467         static int      pad_allocated;
468         
469         printk(KERN_INFO "%s", tlan_banner);
470         
471         TLanPadBuffer = (u8 *) pci_alloc_consistent(NULL, TLAN_MIN_FRAME_SIZE, &TLanPadBufferDMA);
472
473         if (TLanPadBuffer == NULL) {
474                 printk(KERN_ERR "TLAN: Could not allocate memory for pad buffer.\n");
475                 return -ENOMEM;
476         }
477
478         memset(TLanPadBuffer, 0, TLAN_MIN_FRAME_SIZE);
479         pad_allocated = 1;
480
481         TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
482         
483         /* Use new style PCI probing. Now the kernel will
484            do most of this for us */
485         pci_register_driver(&tlan_driver);
486
487         TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
488         TLan_EisaProbe();
489                 
490         printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d  EISA: %d\n", 
491                  TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
492                  tlan_have_pci, tlan_have_eisa);
493
494         if (TLanDevicesInstalled == 0) {
495                 pci_unregister_driver(&tlan_driver);
496                 pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
497                 return -ENODEV;
498         }
499         return 0;
500 }
501         
502
503 static int __devinit tlan_init_one( struct pci_dev *pdev,
504                                     const struct pci_device_id *ent)
505 {
506         return TLan_probe1( pdev, -1, -1, 0, ent);
507 }
508
509
510 /*
511         ***************************************************************
512          *      tlan_probe1
513          *
514          *      Returns:
515          *              0 on success, error code on error
516          *      Parms: 
517          *              none
518          *
519          *      The name is lower case to fit in with all the rest of
520          *      the netcard_probe names.  This function looks for 
521          *      another TLan based adapter, setting it up with the
522          *      allocated device struct if one is found.
523          *      tlan_probe has been ported to the new net API and
524          *      now allocates its own device structure. This function
525          *      is also used by modules.
526          *
527          **************************************************************/
528
529 static int __devinit TLan_probe1(struct pci_dev *pdev, 
530                                 long ioaddr, int irq, int rev, const struct pci_device_id *ent )
531 {
532
533         struct net_device  *dev;
534         TLanPrivateInfo    *priv;
535         u8                 pci_rev;
536         u16                device_id;
537         int                reg, rc = -ENODEV;
538
539         if (pdev) {
540                 rc = pci_enable_device(pdev);
541                 if (rc)
542                         return rc;
543
544                 rc = pci_request_regions(pdev, TLanSignature);
545                 if (rc) {
546                         printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
547                         goto err_out;
548                 }
549         }
550
551         dev = alloc_etherdev(sizeof(TLanPrivateInfo));
552         if (dev == NULL) {
553                 printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
554                 rc = -ENOMEM;
555                 goto err_out_regions;
556         }
557         SET_MODULE_OWNER(dev);
558         SET_NETDEV_DEV(dev, &pdev->dev);
559         
560         priv = netdev_priv(dev);
561
562         priv->pciDev = pdev;
563         
564         /* Is this a PCI device? */
565         if (pdev) {
566                 u32                pci_io_base = 0;
567
568                 priv->adapter = &board_info[ent->driver_data];
569
570                 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
571                 if (rc) {
572                         printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
573                         goto err_out_free_dev;
574                 }
575
576                 pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
577
578                 for ( reg= 0; reg <= 5; reg ++ ) {
579                         if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
580                                 pci_io_base = pci_resource_start(pdev, reg);
581                                 TLAN_DBG( TLAN_DEBUG_GNRL, "IO mapping is available at %x.\n",
582                                                 pci_io_base);
583                                 break;
584                         }
585                 }
586                 if (!pci_io_base) {
587                         printk(KERN_ERR "TLAN: No IO mappings available\n");
588                         rc = -EIO;
589                         goto err_out_free_dev;
590                 }
591                 
592                 dev->base_addr = pci_io_base;
593                 dev->irq = pdev->irq;
594                 priv->adapterRev = pci_rev; 
595                 pci_set_master(pdev);
596                 pci_set_drvdata(pdev, dev);
597
598         } else  {     /* EISA card */
599                 /* This is a hack. We need to know which board structure
600                  * is suited for this adapter */
601                 device_id = inw(ioaddr + EISA_ID2);
602                 priv->is_eisa = 1;
603                 if (device_id == 0x20F1) {
604                         priv->adapter = &board_info[13];        /* NetFlex-3/E */
605                         priv->adapterRev = 23;                  /* TLAN 2.3 */
606                 } else {
607                         priv->adapter = &board_info[14];
608                         priv->adapterRev = 10;                  /* TLAN 1.0 */
609                 }
610                 dev->base_addr = ioaddr;
611                 dev->irq = irq;
612         }
613
614         /* Kernel parameters */
615         if (dev->mem_start) {
616                 priv->aui    = dev->mem_start & 0x01;
617                 priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 : (dev->mem_start & 0x06) >> 1;
618                 priv->speed  = ((dev->mem_start & 0x18) == 0x18) ? 0 : (dev->mem_start & 0x18) >> 3;
619         
620                 if (priv->speed == 0x1) {
621                         priv->speed = TLAN_SPEED_10;
622                 } else if (priv->speed == 0x2) {
623                         priv->speed = TLAN_SPEED_100;
624                 }
625                 debug = priv->debug = dev->mem_end;
626         } else {
627                 priv->aui    = aui[boards_found];
628                 priv->speed  = speed[boards_found];
629                 priv->duplex = duplex[boards_found];
630                 priv->debug = debug;
631         }
632         
633         /* This will be used when we get an adapter error from
634          * within our irq handler */
635         INIT_WORK(&priv->tlan_tqueue, (void *)(void*)TLan_tx_timeout, dev);
636
637         spin_lock_init(&priv->lock);
638         
639         rc = TLan_Init(dev);
640         if (rc) {
641                 printk(KERN_ERR "TLAN: Could not set up device.\n");
642                 goto err_out_free_dev;
643         }
644
645         rc = register_netdev(dev);
646         if (rc) {
647                 printk(KERN_ERR "TLAN: Could not register device.\n");
648                 goto err_out_uninit;
649         }
650
651         
652         TLanDevicesInstalled++;
653         boards_found++;
654         
655         /* pdev is NULL if this is an EISA device */
656         if (pdev)
657                 tlan_have_pci++;
658         else {
659                 priv->nextDevice = TLan_Eisa_Devices;
660                 TLan_Eisa_Devices = dev;
661                 tlan_have_eisa++;
662         }
663         
664         printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
665                         dev->name,
666                         (int) dev->irq,
667                         (int) dev->base_addr,
668                         priv->adapter->deviceLabel,
669                         priv->adapterRev);
670         return 0;
671
672 err_out_uninit:
673         pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage,
674                             priv->dmaStorageDMA );
675 err_out_free_dev:
676         free_netdev(dev);
677 err_out_regions:
678 #ifdef CONFIG_PCI
679         if (pdev)
680                 pci_release_regions(pdev);
681 #endif
682 err_out:
683         if (pdev)
684                 pci_disable_device(pdev);
685         return rc;
686 }
687
688
689 static void TLan_Eisa_Cleanup(void)
690 {
691         struct net_device *dev;
692         TLanPrivateInfo *priv;
693         
694         while( tlan_have_eisa ) {
695                 dev = TLan_Eisa_Devices;
696                 priv = netdev_priv(dev);
697                 if (priv->dmaStorage) {
698                         pci_free_consistent(priv->pciDev, priv->dmaSize, priv->dmaStorage, priv->dmaStorageDMA );
699                 }
700                 release_region( dev->base_addr, 0x10);
701                 unregister_netdev( dev );
702                 TLan_Eisa_Devices = priv->nextDevice;
703                 free_netdev( dev );
704                 tlan_have_eisa--;
705         }
706 }
707         
708                 
709 static void __exit tlan_exit(void)
710 {
711         pci_unregister_driver(&tlan_driver);
712
713         if (tlan_have_eisa)
714                 TLan_Eisa_Cleanup();
715
716         pci_free_consistent(NULL, TLAN_MIN_FRAME_SIZE, TLanPadBuffer, TLanPadBufferDMA);
717
718 }
719
720
721 /* Module loading/unloading */
722 module_init(tlan_probe);
723 module_exit(tlan_exit);
724
725
726
727         /**************************************************************
728          *      TLan_EisaProbe
729          *
730          *      Returns: 0 on success, 1 otherwise
731          *
732          *      Parms:   None
733          *
734          *
735          *      This functions probes for EISA devices and calls 
736          *      TLan_probe1 when one is found. 
737          *
738          *************************************************************/
739
740 static void  __init TLan_EisaProbe (void) 
741 {
742         long    ioaddr;
743         int     rc = -ENODEV;
744         int     irq;
745         u16     device_id;
746
747         if (!EISA_bus) {        
748                 TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
749                 return;
750         }
751         
752         /* Loop through all slots of the EISA bus */
753         for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
754                 
755         TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC80, inw(ioaddr + EISA_ID));       
756         TLAN_DBG(TLAN_DEBUG_PROBE,"EISA_ID 0x%4x: 0x%4x\n", (int) ioaddr + 0xC82, inw(ioaddr + EISA_ID2));
757
758
759                 TLAN_DBG(TLAN_DEBUG_PROBE, "Probing for EISA adapter at IO: 0x%4x : ",
760                                         (int) ioaddr);
761                 if (request_region(ioaddr, 0x10, TLanSignature) == NULL) 
762                         goto out;
763
764                 if (inw(ioaddr + EISA_ID) != 0x110E) {          
765                         release_region(ioaddr, 0x10);
766                         goto out;
767                 }
768                 
769                 device_id = inw(ioaddr + EISA_ID2);
770                 if (device_id !=  0x20F1 && device_id != 0x40F1) {              
771                         release_region (ioaddr, 0x10);
772                         goto out;
773                 }
774                 
775                 if (inb(ioaddr + EISA_CR) != 0x1) {     /* Check if adapter is enabled */
776                         release_region (ioaddr, 0x10);
777                         goto out2;
778                 }
779                 
780                 if (debug == 0x10)              
781                         printk("Found one\n");
782
783
784                 /* Get irq from board */
785                 switch (inb(ioaddr + 0xCC0)) {
786                         case(0x10):
787                                 irq=5;
788                                 break;
789                         case(0x20):
790                                 irq=9;
791                                 break;
792                         case(0x40):
793                                 irq=10;
794                                 break;
795                         case(0x80):
796                                 irq=11;
797                                 break;
798                         default:
799                                 goto out;
800                 }               
801                 
802                 
803                 /* Setup the newly found eisa adapter */
804                 rc = TLan_probe1( NULL, ioaddr, irq,
805                                         12, NULL);
806                 continue;
807                 
808                 out:
809                         if (debug == 0x10)
810                                 printk("None found\n");
811                         continue;
812
813                 out2:   if (debug == 0x10)
814                                 printk("Card found but it is not enabled, skipping\n");
815                         continue;
816                 
817         }
818
819 } /* TLan_EisaProbe */
820
821 #ifdef CONFIG_NET_POLL_CONTROLLER
822 static void TLan_Poll(struct net_device *dev)
823 {
824         disable_irq(dev->irq);
825         TLan_HandleInterrupt(dev->irq, dev, NULL);
826         enable_irq(dev->irq);
827 }
828 #endif
829
830         
831
832
833         /***************************************************************
834          *      TLan_Init
835          *
836          *      Returns:
837          *              0 on success, error code otherwise.
838          *      Parms:
839          *              dev     The structure of the device to be
840          *                      init'ed.
841          *
842          *      This function completes the initialization of the
843          *      device structure and driver.  It reserves the IO
844          *      addresses, allocates memory for the lists and bounce
845          *      buffers, retrieves the MAC address from the eeprom
846          *      and assignes the device's methods.
847          *      
848          **************************************************************/
849
850 static int TLan_Init( struct net_device *dev )
851 {
852         int             dma_size;
853         int             err;
854         int             i;
855         TLanPrivateInfo *priv;
856
857         priv = netdev_priv(dev);
858         
859         if ( bbuf ) {
860                 dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
861                    * ( sizeof(TLanList) + TLAN_MAX_FRAME_SIZE );
862         } else {
863                 dma_size = ( TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS )
864                    * ( sizeof(TLanList) );
865         }
866         priv->dmaStorage = pci_alloc_consistent(priv->pciDev, dma_size, &priv->dmaStorageDMA);
867         priv->dmaSize = dma_size;
868         
869         if ( priv->dmaStorage == NULL ) {
870                 printk(KERN_ERR "TLAN:  Could not allocate lists and buffers for %s.\n",
871                         dev->name );
872                 return -ENOMEM;
873         }
874         memset( priv->dmaStorage, 0, dma_size );
875         priv->rxList = (TLanList *) 
876                        ( ( ( (u32) priv->dmaStorage ) + 7 ) & 0xFFFFFFF8 );
877         priv->rxListDMA = ( ( ( (u32) priv->dmaStorageDMA ) + 7 ) & 0xFFFFFFF8 );
878         priv->txList = priv->rxList + TLAN_NUM_RX_LISTS;
879         priv->txListDMA = priv->rxListDMA + sizeof(TLanList) * TLAN_NUM_RX_LISTS;
880         if ( bbuf ) {
881                 priv->rxBuffer = (u8 *) ( priv->txList + TLAN_NUM_TX_LISTS );
882                 priv->rxBufferDMA =priv->txListDMA + sizeof(TLanList) * TLAN_NUM_TX_LISTS;
883                 priv->txBuffer = priv->rxBuffer + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
884                 priv->txBufferDMA = priv->rxBufferDMA + ( TLAN_NUM_RX_LISTS * TLAN_MAX_FRAME_SIZE );
885         }
886
887         err = 0;
888         for ( i = 0;  i < 6 ; i++ )
889                 err |= TLan_EeReadByte( dev,
890                                         (u8) priv->adapter->addrOfs + i,
891                                         (u8 *) &dev->dev_addr[i] );
892         if ( err ) {
893                 printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
894                         dev->name,
895                         err );
896         }
897         dev->addr_len = 6;
898
899         netif_carrier_off(dev);
900
901         /* Device methods */
902         dev->open = &TLan_Open;
903         dev->hard_start_xmit = &TLan_StartTx;
904         dev->stop = &TLan_Close;
905         dev->get_stats = &TLan_GetStats;
906         dev->set_multicast_list = &TLan_SetMulticastList;
907         dev->do_ioctl = &TLan_ioctl;
908 #ifdef CONFIG_NET_POLL_CONTROLLER
909         dev->poll_controller = &TLan_Poll;
910 #endif
911         dev->tx_timeout = &TLan_tx_timeout;
912         dev->watchdog_timeo = TX_TIMEOUT;
913
914         return 0;
915
916 } /* TLan_Init */
917
918
919
920
921         /***************************************************************
922          *      TLan_Open
923          *
924          *      Returns:
925          *              0 on success, error code otherwise.
926          *      Parms:
927          *              dev     Structure of device to be opened.
928          *
929          *      This routine puts the driver and TLAN adapter in a
930          *      state where it is ready to send and receive packets.
931          *      It allocates the IRQ, resets and brings the adapter
932          *      out of reset, and allows interrupts.  It also delays
933          *      the startup for autonegotiation or sends a Rx GO
934          *      command to the adapter, as appropriate.
935          *
936          **************************************************************/
937
938 static int TLan_Open( struct net_device *dev )
939 {
940         TLanPrivateInfo *priv = netdev_priv(dev);
941         int             err;
942         
943         priv->tlanRev = TLan_DioRead8( dev->base_addr, TLAN_DEF_REVISION );
944         err = request_irq( dev->irq, TLan_HandleInterrupt, SA_SHIRQ, TLanSignature, dev );
945         
946         if ( err ) {
947                 printk(KERN_ERR "TLAN:  Cannot open %s because IRQ %d is already in use.\n", dev->name, dev->irq );
948                 return err;
949         }
950         
951         init_timer(&priv->timer);
952         netif_start_queue(dev);
953         
954         /* NOTE: It might not be necessary to read the stats before a
955                          reset if you don't care what the values are.
956         */
957         TLan_ResetLists( dev );
958         TLan_ReadAndClearStats( dev, TLAN_IGNORE );
959         TLan_ResetAdapter( dev );
960
961         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Opened.  TLAN Chip Rev: %x\n", dev->name, priv->tlanRev );
962
963         return 0;
964
965 } /* TLan_Open */
966
967
968
969         /**************************************************************
970          *      TLan_ioctl
971          *      
972          *      Returns:
973          *              0 on success, error code otherwise
974          *      Params:
975          *              dev     structure of device to receive ioctl.
976          *              
977          *              rq      ifreq structure to hold userspace data.
978          *
979          *              cmd     ioctl command.
980          *
981          *
982          *************************************************************/
983
984 static int TLan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
985 {
986         TLanPrivateInfo *priv = netdev_priv(dev);
987         struct mii_ioctl_data *data = if_mii(rq);
988         u32 phy   = priv->phy[priv->phyNum];
989         
990         if (!priv->phyOnline)
991                 return -EAGAIN;
992
993         switch(cmd) {
994         case SIOCGMIIPHY:               /* Get address of MII PHY in use. */
995                         data->phy_id = phy;
996
997
998         case SIOCGMIIREG:               /* Read MII PHY register. */
999                         TLan_MiiReadReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, &data->val_out);
1000                         return 0;
1001                 
1002
1003         case SIOCSMIIREG:               /* Write MII PHY register. */
1004                         if (!capable(CAP_NET_ADMIN))
1005                                 return -EPERM;
1006                         TLan_MiiWriteReg(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
1007                         return 0;
1008                 default:
1009                         return -EOPNOTSUPP;
1010         }
1011 } /* tlan_ioctl */
1012
1013
1014         /***************************************************************
1015          *      TLan_tx_timeout
1016          *
1017          *      Returns: nothing
1018          *
1019          *      Params:
1020          *              dev     structure of device which timed out 
1021          *                      during transmit.
1022          *
1023          **************************************************************/
1024
1025 static void TLan_tx_timeout(struct net_device *dev)
1026 {
1027         
1028         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
1029         
1030         /* Ok so we timed out, lets see what we can do about it...*/
1031         TLan_FreeLists( dev );
1032         TLan_ResetLists( dev );         
1033         TLan_ReadAndClearStats( dev, TLAN_IGNORE );
1034         TLan_ResetAdapter( dev );
1035         dev->trans_start = jiffies;
1036         netif_wake_queue( dev );        
1037
1038 }
1039         
1040
1041
1042         /***************************************************************
1043          *      TLan_StartTx
1044          *  
1045          *      Returns:
1046          *              0 on success, non-zero on failure.
1047          *      Parms:
1048          *              skb     A pointer to the sk_buff containing the
1049          *                      frame to be sent.
1050          *              dev     The device to send the data on.
1051          *
1052          *      This function adds a frame to the Tx list to be sent
1053          *      ASAP.  First it verifies that the adapter is ready and
1054          *      there is room in the queue.  Then it sets up the next
1055          *      available list, copies the frame to the corresponding
1056          *      buffer.  If the adapter Tx channel is idle, it gives
1057          *      the adapter a Tx Go command on the list, otherwise it
1058          *      sets the forward address of the previous list to point
1059          *      to this one.  Then it frees the sk_buff.
1060          *
1061          **************************************************************/
1062
1063 static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
1064 {
1065         TLanPrivateInfo *priv = netdev_priv(dev);
1066         TLanList        *tail_list;
1067         dma_addr_t      tail_list_phys;
1068         u8              *tail_buffer;
1069         int             pad;
1070         unsigned long   flags;
1071
1072         if ( ! priv->phyOnline ) {
1073                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n", dev->name );
1074                 dev_kfree_skb_any(skb);
1075                 return 0;
1076         }
1077
1078         tail_list = priv->txList + priv->txTail;
1079         tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
1080         
1081         if ( tail_list->cStat != TLAN_CSTAT_UNUSED ) {
1082                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s is busy (Head=%d Tail=%d)\n", dev->name, priv->txHead, priv->txTail );
1083                 netif_stop_queue(dev);
1084                 priv->txBusyCount++;
1085                 return 1;
1086         }
1087
1088         tail_list->forward = 0;
1089
1090         if ( bbuf ) {
1091                 tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
1092                 memcpy( tail_buffer, skb->data, skb->len );
1093         } else {
1094                 tail_list->buffer[0].address = pci_map_single(priv->pciDev, skb->data, skb->len, PCI_DMA_TODEVICE);
1095                 TLan_StoreSKB(tail_list, skb);
1096         }
1097
1098         pad = TLAN_MIN_FRAME_SIZE - skb->len;
1099
1100         if ( pad > 0 ) {
1101                 tail_list->frameSize = (u16) skb->len + pad;
1102                 tail_list->buffer[0].count = (u32) skb->len;
1103                 tail_list->buffer[1].count = TLAN_LAST_BUFFER | (u32) pad;
1104                 tail_list->buffer[1].address = TLanPadBufferDMA;
1105         } else {
1106                 tail_list->frameSize = (u16) skb->len;
1107                 tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
1108                 tail_list->buffer[1].count = 0;
1109                 tail_list->buffer[1].address = 0;
1110         }
1111
1112         spin_lock_irqsave(&priv->lock, flags);
1113         tail_list->cStat = TLAN_CSTAT_READY;
1114         if ( ! priv->txInProgress ) {
1115                 priv->txInProgress = 1;
1116                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Starting TX on buffer %d\n", priv->txTail );
1117                 outl( tail_list_phys, dev->base_addr + TLAN_CH_PARM );
1118                 outl( TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD );
1119         } else {
1120                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Adding buffer %d to TX channel\n", priv->txTail );
1121                 if ( priv->txTail == 0 ) {
1122                         ( priv->txList + ( TLAN_NUM_TX_LISTS - 1 ) )->forward = tail_list_phys;
1123                 } else {
1124                         ( priv->txList + ( priv->txTail - 1 ) )->forward = tail_list_phys;
1125                 }
1126         }
1127         spin_unlock_irqrestore(&priv->lock, flags);
1128
1129         CIRC_INC( priv->txTail, TLAN_NUM_TX_LISTS );
1130
1131         if ( bbuf )
1132                 dev_kfree_skb_any(skb);
1133                 
1134         dev->trans_start = jiffies;
1135         return 0;
1136
1137 } /* TLan_StartTx */
1138
1139
1140
1141
1142         /***************************************************************
1143          *      TLan_HandleInterrupt
1144          *  
1145          *      Returns:        
1146          *              Nothing
1147          *      Parms:
1148          *              irq     The line on which the interrupt
1149          *                      occurred.
1150          *              dev_id  A pointer to the device assigned to
1151          *                      this irq line.
1152          *              regs    ???
1153          *
1154          *      This function handles an interrupt generated by its
1155          *      assigned TLAN adapter.  The function deactivates
1156          *      interrupts on its adapter, records the type of
1157          *      interrupt, executes the appropriate subhandler, and
1158          *      acknowdges the interrupt to the adapter (thus
1159          *      re-enabling adapter interrupts.
1160          *
1161          **************************************************************/
1162
1163 static irqreturn_t TLan_HandleInterrupt(int irq, void *dev_id, struct pt_regs *regs)
1164 {
1165         u32             ack;
1166         struct net_device       *dev;
1167         u32             host_cmd;
1168         u16             host_int;
1169         int             type;
1170         TLanPrivateInfo *priv;
1171
1172         dev = dev_id;
1173         priv = netdev_priv(dev);
1174
1175         spin_lock(&priv->lock);
1176
1177         host_int = inw( dev->base_addr + TLAN_HOST_INT );
1178         outw( host_int, dev->base_addr + TLAN_HOST_INT );
1179
1180         type = ( host_int & TLAN_HI_IT_MASK ) >> 2;
1181
1182         ack = TLanIntVector[type]( dev, host_int );
1183
1184         if ( ack ) {
1185                 host_cmd = TLAN_HC_ACK | ack | ( type << 18 );
1186                 outl( host_cmd, dev->base_addr + TLAN_HOST_CMD );
1187         }
1188
1189         spin_unlock(&priv->lock);
1190
1191         return IRQ_HANDLED;
1192 } /* TLan_HandleInterrupts */
1193
1194
1195
1196
1197         /***************************************************************
1198          *      TLan_Close
1199          *  
1200          *      Returns:
1201          *              An error code.
1202          *      Parms:
1203          *              dev     The device structure of the device to
1204          *                      close.
1205          *
1206          *      This function shuts down the adapter.  It records any
1207          *      stats, puts the adapter into reset state, deactivates
1208          *      its time as needed, and frees the irq it is using.
1209          *
1210          **************************************************************/
1211
1212 static int TLan_Close(struct net_device *dev)
1213 {
1214         TLanPrivateInfo *priv = netdev_priv(dev);
1215
1216         netif_stop_queue(dev);
1217         priv->neg_be_verbose = 0;
1218
1219         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1220         outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1221         if ( priv->timer.function != NULL ) {
1222                 del_timer_sync( &priv->timer );
1223                 priv->timer.function = NULL;
1224         }
1225         
1226         free_irq( dev->irq, dev );
1227         TLan_FreeLists( dev );
1228         TLAN_DBG( TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name );
1229
1230         return 0;
1231
1232 } /* TLan_Close */
1233
1234
1235
1236
1237         /***************************************************************
1238          *      TLan_GetStats
1239          *  
1240          *      Returns:
1241          *              A pointer to the device's statistics structure.
1242          *      Parms:
1243          *              dev     The device structure to return the
1244          *                      stats for.
1245          *
1246          *      This function updates the devices statistics by reading
1247          *      the TLAN chip's onboard registers.  Then it returns the
1248          *      address of the statistics structure.
1249          *
1250          **************************************************************/
1251
1252 static struct net_device_stats *TLan_GetStats( struct net_device *dev )
1253 {
1254         TLanPrivateInfo *priv = netdev_priv(dev);
1255         int i;
1256
1257         /* Should only read stats if open ? */
1258         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1259
1260         TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  %s EOC count = %d\n", dev->name, priv->rxEocCount );
1261         TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s Busy count = %d\n", dev->name, priv->txBusyCount );
1262         if ( debug & TLAN_DEBUG_GNRL ) {
1263                 TLan_PrintDio( dev->base_addr );
1264                 TLan_PhyPrint( dev );           
1265         }
1266         if ( debug & TLAN_DEBUG_LIST ) {
1267                 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ )
1268                         TLan_PrintList( priv->rxList + i, "RX", i );
1269                 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ )
1270                         TLan_PrintList( priv->txList + i, "TX", i );
1271         }
1272         
1273         return ( &( (TLanPrivateInfo *) netdev_priv(dev) )->stats );
1274
1275 } /* TLan_GetStats */
1276
1277
1278
1279
1280         /***************************************************************
1281          *      TLan_SetMulticastList
1282          *  
1283          *      Returns:
1284          *              Nothing
1285          *      Parms:
1286          *              dev     The device structure to set the
1287          *                      multicast list for.
1288          *
1289          *      This function sets the TLAN adaptor to various receive
1290          *      modes.  If the IFF_PROMISC flag is set, promiscuous
1291          *      mode is acitviated.  Otherwise, promiscuous mode is
1292          *      turned off.  If the IFF_ALLMULTI flag is set, then
1293          *      the hash table is set to receive all group addresses.
1294          *      Otherwise, the first three multicast addresses are
1295          *      stored in AREG_1-3, and the rest are selected via the
1296          *      hash table, as necessary.
1297          *
1298          **************************************************************/
1299
1300 static void TLan_SetMulticastList( struct net_device *dev )
1301 {       
1302         struct dev_mc_list      *dmi = dev->mc_list;
1303         u32                     hash1 = 0;
1304         u32                     hash2 = 0;
1305         int                     i;
1306         u32                     offset;
1307         u8                      tmp;
1308
1309         if ( dev->flags & IFF_PROMISC ) {
1310                 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1311                 TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF );
1312         } else {
1313                 tmp = TLan_DioRead8( dev->base_addr, TLAN_NET_CMD );
1314                 TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF );
1315                 if ( dev->flags & IFF_ALLMULTI ) {
1316                         for ( i = 0; i < 3; i++ ) 
1317                                 TLan_SetMac( dev, i + 1, NULL );
1318                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, 0xFFFFFFFF );
1319                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, 0xFFFFFFFF );
1320                 } else {
1321                         for ( i = 0; i < dev->mc_count; i++ ) {
1322                                 if ( i < 3 ) {
1323                                         TLan_SetMac( dev, i + 1, (char *) &dmi->dmi_addr );
1324                                 } else {
1325                                         offset = TLan_HashFunc( (u8 *) &dmi->dmi_addr );
1326                                         if ( offset < 32 ) 
1327                                                 hash1 |= ( 1 << offset );
1328                                         else
1329                                                 hash2 |= ( 1 << ( offset - 32 ) );
1330                                 }
1331                                 dmi = dmi->next;
1332                         }
1333                         for ( ; i < 3; i++ ) 
1334                                 TLan_SetMac( dev, i + 1, NULL );
1335                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_1, hash1 );
1336                         TLan_DioWrite32( dev->base_addr, TLAN_HASH_2, hash2 );
1337                 }
1338         }
1339
1340 } /* TLan_SetMulticastList */
1341
1342
1343
1344 /*****************************************************************************
1345 ******************************************************************************
1346
1347         ThunderLAN Driver Interrupt Vectors and Table
1348
1349         Please see Chap. 4, "Interrupt Handling" of the "ThunderLAN
1350         Programmer's Guide" for more informations on handling interrupts
1351         generated by TLAN based adapters.  
1352
1353 ******************************************************************************
1354 *****************************************************************************/
1355
1356
1357         /***************************************************************
1358          *      TLan_HandleInvalid
1359          *
1360          *      Returns:
1361          *              0
1362          *      Parms:
1363          *              dev             Device assigned the IRQ that was
1364          *                              raised.
1365          *              host_int        The contents of the HOST_INT
1366          *                              port.
1367          *
1368          *      This function handles invalid interrupts.  This should
1369          *      never happen unless some other adapter is trying to use
1370          *      the IRQ line assigned to the device.
1371          *
1372          **************************************************************/
1373
1374 u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int )
1375 {
1376         /* printk( "TLAN:  Invalid interrupt on %s.\n", dev->name ); */
1377         return 0;
1378
1379 } /* TLan_HandleInvalid */
1380
1381
1382
1383
1384         /***************************************************************
1385          *      TLan_HandleTxEOF
1386          *
1387          *      Returns:
1388          *              1
1389          *      Parms:
1390          *              dev             Device assigned the IRQ that was
1391          *                              raised.
1392          *              host_int        The contents of the HOST_INT
1393          *                              port.
1394          *
1395          *      This function handles Tx EOF interrupts which are raised
1396          *      by the adapter when it has completed sending the
1397          *      contents of a buffer.  If detemines which list/buffer
1398          *      was completed and resets it.  If the buffer was the last
1399          *      in the channel (EOC), then the function checks to see if
1400          *      another buffer is ready to send, and if so, sends a Tx
1401          *      Go command.  Finally, the driver activates/continues the
1402          *      activity LED.
1403          *
1404          **************************************************************/
1405
1406 u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
1407 {
1408         TLanPrivateInfo *priv = netdev_priv(dev);
1409         int             eoc = 0;
1410         TLanList        *head_list;
1411         dma_addr_t      head_list_phys;
1412         u32             ack = 0;
1413         u16             tmpCStat;
1414         
1415         TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOF (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
1416         head_list = priv->txList + priv->txHead;
1417
1418         while (((tmpCStat = head_list->cStat ) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1419                 ack++;
1420                 if ( ! bbuf ) {
1421                         struct sk_buff *skb = TLan_GetSKB(head_list);
1422                         pci_unmap_single(priv->pciDev, head_list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
1423                         dev_kfree_skb_any(skb);
1424                         head_list->buffer[8].address = 0;
1425                         head_list->buffer[9].address = 0;
1426                 }
1427         
1428                 if ( tmpCStat & TLAN_CSTAT_EOC )
1429                         eoc = 1;
1430                         
1431                 priv->stats.tx_bytes += head_list->frameSize;
1432
1433                 head_list->cStat = TLAN_CSTAT_UNUSED;
1434                 netif_start_queue(dev);         
1435                 CIRC_INC( priv->txHead, TLAN_NUM_TX_LISTS ); 
1436                 head_list = priv->txList + priv->txHead;
1437         }
1438
1439         if (!ack)
1440                 printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
1441         
1442         if ( eoc ) {
1443                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d)\n", priv->txHead, priv->txTail );
1444                 head_list = priv->txList + priv->txHead;
1445                 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1446                 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1447                         outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1448                         ack |= TLAN_HC_GO;
1449                 } else {
1450                         priv->txInProgress = 0;
1451                 }
1452         }
1453         
1454         if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1455                 TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1456                 if ( priv->timer.function == NULL ) {
1457                          priv->timer.function = &TLan_Timer;
1458                          priv->timer.data = (unsigned long) dev;
1459                          priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1460                          priv->timerSetAt = jiffies;
1461                          priv->timerType = TLAN_TIMER_ACTIVITY;
1462                          add_timer(&priv->timer);
1463                 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1464                         priv->timerSetAt = jiffies;
1465                 }
1466         }
1467
1468         return ack;
1469
1470 } /* TLan_HandleTxEOF */
1471
1472
1473
1474
1475         /***************************************************************
1476          *      TLan_HandleStatOverflow
1477          *
1478          *      Returns:
1479          *              1
1480          *      Parms:
1481          *              dev             Device assigned the IRQ that was
1482          *                              raised.
1483          *              host_int        The contents of the HOST_INT
1484          *                              port.
1485          *
1486          *      This function handles the Statistics Overflow interrupt
1487          *      which means that one or more of the TLAN statistics
1488          *      registers has reached 1/2 capacity and needs to be read.
1489          *
1490          **************************************************************/
1491
1492 u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int )
1493 {
1494         TLan_ReadAndClearStats( dev, TLAN_RECORD );
1495
1496         return 1;
1497
1498 } /* TLan_HandleStatOverflow */
1499
1500
1501
1502
1503         /***************************************************************
1504          *      TLan_HandleRxEOF
1505          *
1506          *      Returns:
1507          *              1
1508          *      Parms:
1509          *              dev             Device assigned the IRQ that was
1510          *                              raised.
1511          *              host_int        The contents of the HOST_INT
1512          *                              port.
1513          *
1514          *      This function handles the Rx EOF interrupt which
1515          *      indicates a frame has been received by the adapter from
1516          *      the net and the frame has been transferred to memory.
1517          *      The function determines the bounce buffer the frame has
1518          *      been loaded into, creates a new sk_buff big enough to
1519          *      hold the frame, and sends it to protocol stack.  It
1520          *      then resets the used buffer and appends it to the end
1521          *      of the list.  If the frame was the last in the Rx
1522          *      channel (EOC), the function restarts the receive channel
1523          *      by sending an Rx Go command to the adapter.  Then it
1524          *      activates/continues the activity LED.
1525          *
1526          **************************************************************/
1527
1528 u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int )
1529 {
1530         TLanPrivateInfo *priv = netdev_priv(dev);
1531         u32             ack = 0;
1532         int             eoc = 0;
1533         u8              *head_buffer;
1534         TLanList        *head_list;
1535         struct sk_buff  *skb;
1536         TLanList        *tail_list;
1537         void            *t;
1538         u32             frameSize;
1539         u16             tmpCStat;
1540         dma_addr_t      head_list_phys;
1541
1542         TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOF (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
1543         head_list = priv->rxList + priv->rxHead;
1544         head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1545         
1546         while (((tmpCStat = head_list->cStat) & TLAN_CSTAT_FRM_CMP) && (ack < 255)) {
1547                 frameSize = head_list->frameSize;
1548                 ack++;
1549                 if (tmpCStat & TLAN_CSTAT_EOC)
1550                         eoc = 1;
1551                 
1552                 if (bbuf) {
1553                         skb = dev_alloc_skb(frameSize + 7);
1554                         if (skb == NULL)
1555                                 printk(KERN_INFO "TLAN: Couldn't allocate memory for received data.\n");
1556                         else {
1557                                 head_buffer = priv->rxBuffer + (priv->rxHead * TLAN_MAX_FRAME_SIZE);
1558                                 skb->dev = dev;
1559                                 skb_reserve(skb, 2);
1560                                 t = (void *) skb_put(skb, frameSize);
1561                 
1562                                 priv->stats.rx_bytes += head_list->frameSize;
1563
1564                                 memcpy( t, head_buffer, frameSize );
1565                                 skb->protocol = eth_type_trans( skb, dev );
1566                                 netif_rx( skb );
1567                         }
1568                 } else {
1569                         struct sk_buff *new_skb;
1570                 
1571                         /*
1572                          *      I changed the algorithm here. What we now do
1573                          *      is allocate the new frame. If this fails we
1574                          *      simply recycle the frame.
1575                          */
1576                 
1577                         new_skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
1578                         
1579                         if ( new_skb != NULL ) {
1580                                 skb = TLan_GetSKB(head_list);
1581                                 pci_unmap_single(priv->pciDev, head_list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
1582                                 skb_trim( skb, frameSize );
1583
1584                                 priv->stats.rx_bytes += frameSize;
1585
1586                                 skb->protocol = eth_type_trans( skb, dev );
1587                                 netif_rx( skb );
1588         
1589                                 new_skb->dev = dev;
1590                                 skb_reserve( new_skb, 2 );
1591                                 t = (void *) skb_put( new_skb, TLAN_MAX_FRAME_SIZE );
1592                                 head_list->buffer[0].address = pci_map_single(priv->pciDev, new_skb->data, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
1593                                 head_list->buffer[8].address = (u32) t;
1594                                 TLan_StoreSKB(head_list, new_skb);
1595                         } else 
1596                                 printk(KERN_WARNING "TLAN:  Couldn't allocate memory for received data.\n" );
1597                 }
1598
1599                 head_list->forward = 0;
1600                 head_list->cStat = 0;
1601                 tail_list = priv->rxList + priv->rxTail;
1602                 tail_list->forward = head_list_phys;
1603
1604                 CIRC_INC( priv->rxHead, TLAN_NUM_RX_LISTS );
1605                 CIRC_INC( priv->rxTail, TLAN_NUM_RX_LISTS );
1606                 head_list = priv->rxList + priv->rxHead;
1607                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1608         }
1609
1610         if (!ack)
1611                 printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
1612         
1613
1614
1615
1616         if ( eoc ) { 
1617                 TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOC (Head=%d Tail=%d)\n", priv->rxHead, priv->rxTail );
1618                 head_list = priv->rxList + priv->rxHead;
1619                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1620                 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM );
1621                 ack |= TLAN_HC_GO | TLAN_HC_RT;
1622                 priv->rxEocCount++;
1623         }
1624
1625         if ( priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED ) {
1626                 TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT );
1627                 if ( priv->timer.function == NULL )  {
1628                         priv->timer.function = &TLan_Timer;
1629                         priv->timer.data = (unsigned long) dev;
1630                         priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1631                         priv->timerSetAt = jiffies;
1632                         priv->timerType = TLAN_TIMER_ACTIVITY;
1633                         add_timer(&priv->timer);
1634                 } else if ( priv->timerType == TLAN_TIMER_ACTIVITY ) {
1635                         priv->timerSetAt = jiffies;
1636                 }
1637         }
1638
1639         dev->last_rx = jiffies;
1640         
1641         return ack;
1642
1643 } /* TLan_HandleRxEOF */
1644
1645
1646
1647
1648         /***************************************************************
1649          *      TLan_HandleDummy
1650          *
1651          *      Returns:
1652          *              1
1653          *      Parms:
1654          *              dev             Device assigned the IRQ that was
1655          *                              raised.
1656          *              host_int        The contents of the HOST_INT
1657          *                              port.
1658          *
1659          *      This function handles the Dummy interrupt, which is
1660          *      raised whenever a test interrupt is generated by setting
1661          *      the Req_Int bit of HOST_CMD to 1.
1662          *
1663          **************************************************************/
1664
1665 u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
1666 {
1667         printk( "TLAN:  Test interrupt on %s.\n", dev->name );
1668         return 1;
1669
1670 } /* TLan_HandleDummy */
1671
1672
1673
1674
1675         /***************************************************************
1676          *      TLan_HandleTxEOC
1677          *
1678          *      Returns:
1679          *              1
1680          *      Parms:
1681          *              dev             Device assigned the IRQ that was
1682          *                              raised.
1683          *              host_int        The contents of the HOST_INT
1684          *                              port.
1685          *
1686          *      This driver is structured to determine EOC occurrences by
1687          *      reading the CSTAT member of the list structure.  Tx EOC
1688          *      interrupts are disabled via the DIO INTDIS register.
1689          *      However, TLAN chips before revision 3.0 didn't have this
1690          *      functionality, so process EOC events if this is the
1691          *      case.
1692          *
1693          **************************************************************/
1694
1695 u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int )
1696 {
1697         TLanPrivateInfo *priv = netdev_priv(dev);
1698         TLanList                *head_list;
1699         dma_addr_t              head_list_phys;
1700         u32                     ack = 1;
1701         
1702         host_int = 0;
1703         if ( priv->tlanRev < 0x30 ) {
1704                 TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  Handling TX EOC (Head=%d Tail=%d) -- IRQ\n", priv->txHead, priv->txTail );
1705                 head_list = priv->txList + priv->txHead;
1706                 head_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txHead;
1707                 if ( ( head_list->cStat & TLAN_CSTAT_READY ) == TLAN_CSTAT_READY ) {
1708                         netif_stop_queue(dev);
1709                         outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1710                         ack |= TLAN_HC_GO;
1711                 } else {
1712                         priv->txInProgress = 0;
1713                 }
1714         }
1715
1716         return ack;
1717
1718 } /* TLan_HandleTxEOC */
1719
1720
1721
1722
1723         /***************************************************************
1724          *      TLan_HandleStatusCheck
1725          *
1726          *      Returns:
1727          *              0 if Adapter check, 1 if Network Status check.
1728          *      Parms:
1729          *              dev             Device assigned the IRQ that was
1730          *                              raised.
1731          *              host_int        The contents of the HOST_INT
1732          *                              port.
1733          *
1734          *      This function handles Adapter Check/Network Status
1735          *      interrupts generated by the adapter.  It checks the
1736          *      vector in the HOST_INT register to determine if it is
1737          *      an Adapter Check interrupt.  If so, it resets the
1738          *      adapter.  Otherwise it clears the status registers
1739          *      and services the PHY.
1740          *
1741          **************************************************************/
1742
1743 u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
1744 {       
1745         TLanPrivateInfo *priv = netdev_priv(dev);
1746         u32             ack;
1747         u32             error;
1748         u8              net_sts;
1749         u32             phy;
1750         u16             tlphy_ctl;
1751         u16             tlphy_sts;
1752         
1753         ack = 1;
1754         if ( host_int & TLAN_HI_IV_MASK ) {
1755                 netif_stop_queue( dev );
1756                 error = inl( dev->base_addr + TLAN_CH_PARM );
1757                 printk( "TLAN:  %s: Adaptor Error = 0x%x\n", dev->name, error );
1758                 TLan_ReadAndClearStats( dev, TLAN_RECORD );
1759                 outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
1760
1761                 schedule_work(&priv->tlan_tqueue);
1762
1763                 netif_wake_queue(dev);
1764                 ack = 0;
1765         } else {
1766                 TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name );
1767                 phy = priv->phy[priv->phyNum];
1768
1769                 net_sts = TLan_DioRead8( dev->base_addr, TLAN_NET_STS );
1770                 if ( net_sts ) {
1771                         TLan_DioWrite8( dev->base_addr, TLAN_NET_STS, net_sts );
1772                         TLAN_DBG( TLAN_DEBUG_GNRL, "%s:    Net_Sts = %x\n", dev->name, (unsigned) net_sts );
1773                 }
1774                 if ( ( net_sts & TLAN_NET_STS_MIRQ ) &&  ( priv->phyNum == 0 ) ) {
1775                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_STS, &tlphy_sts );
1776                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
1777                         if ( ! ( tlphy_sts & TLAN_TS_POLOK ) && ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1778                                 tlphy_ctl |= TLAN_TC_SWAPOL;
1779                                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1780                         } else if ( ( tlphy_sts & TLAN_TS_POLOK ) && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
1781                                 tlphy_ctl &= ~TLAN_TC_SWAPOL;
1782                                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
1783                         }
1784
1785                         if (debug) {
1786                                 TLan_PhyPrint( dev );           
1787                         }
1788                 }
1789         }
1790
1791         return ack;
1792
1793 } /* TLan_HandleStatusCheck */
1794
1795
1796
1797
1798         /***************************************************************
1799          *      TLan_HandleRxEOC
1800          *
1801          *      Returns:
1802          *              1
1803          *      Parms:
1804          *              dev             Device assigned the IRQ that was
1805          *                              raised.
1806          *              host_int        The contents of the HOST_INT
1807          *                              port.
1808          *
1809          *      This driver is structured to determine EOC occurrences by
1810          *      reading the CSTAT member of the list structure.  Rx EOC
1811          *      interrupts are disabled via the DIO INTDIS register.
1812          *      However, TLAN chips before revision 3.0 didn't have this
1813          *      CSTAT member or a INTDIS register, so if this chip is
1814          *      pre-3.0, process EOC interrupts normally.
1815          *
1816          **************************************************************/
1817
1818 u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int )
1819 {
1820         TLanPrivateInfo *priv = netdev_priv(dev);
1821         dma_addr_t      head_list_phys;
1822         u32             ack = 1;
1823
1824         if (  priv->tlanRev < 0x30 ) {
1825                 TLAN_DBG( TLAN_DEBUG_RX, "RECEIVE:  Handling RX EOC (Head=%d Tail=%d) -- IRQ\n", priv->rxHead, priv->rxTail );
1826                 head_list_phys = priv->rxListDMA + sizeof(TLanList) * priv->rxHead;
1827                 outl( head_list_phys, dev->base_addr + TLAN_CH_PARM );
1828                 ack |= TLAN_HC_GO | TLAN_HC_RT;
1829                 priv->rxEocCount++;
1830         }
1831
1832         return ack;
1833
1834 } /* TLan_HandleRxEOC */
1835
1836
1837
1838
1839 /*****************************************************************************
1840 ******************************************************************************
1841
1842         ThunderLAN Driver Timer Function
1843
1844 ******************************************************************************
1845 *****************************************************************************/
1846
1847
1848         /***************************************************************
1849          *      TLan_Timer
1850          *
1851          *      Returns:
1852          *              Nothing
1853          *      Parms:
1854          *              data    A value given to add timer when
1855          *                      add_timer was called.
1856          *
1857          *      This function handles timed functionality for the
1858          *      TLAN driver.  The two current timer uses are for
1859          *      delaying for autonegotionation and driving the ACT LED.
1860          *      -       Autonegotiation requires being allowed about
1861          *              2 1/2 seconds before attempting to transmit a
1862          *              packet.  It would be a very bad thing to hang
1863          *              the kernel this long, so the driver doesn't
1864          *              allow transmission 'til after this time, for
1865          *              certain PHYs.  It would be much nicer if all
1866          *              PHYs were interrupt-capable like the internal
1867          *              PHY.
1868          *      -       The ACT LED, which shows adapter activity, is
1869          *              driven by the driver, and so must be left on
1870          *              for a short period to power up the LED so it
1871          *              can be seen.  This delay can be changed by
1872          *              changing the TLAN_TIMER_ACT_DELAY in tlan.h,
1873          *              if desired.  100 ms  produces a slightly
1874          *              sluggish response.
1875          *
1876          **************************************************************/
1877
1878 void TLan_Timer( unsigned long data )
1879 {
1880         struct net_device       *dev = (struct net_device *) data;
1881         TLanPrivateInfo *priv = netdev_priv(dev);
1882         u32             elapsed;
1883         unsigned long   flags = 0;
1884
1885         priv->timer.function = NULL;
1886
1887         switch ( priv->timerType ) {
1888 #ifdef MONITOR          
1889                 case TLAN_TIMER_LINK_BEAT:
1890                         TLan_PhyMonitor( dev );
1891                         break;
1892 #endif
1893                 case TLAN_TIMER_PHY_PDOWN:
1894                         TLan_PhyPowerDown( dev );
1895                         break;
1896                 case TLAN_TIMER_PHY_PUP:
1897                         TLan_PhyPowerUp( dev );
1898                         break;
1899                 case TLAN_TIMER_PHY_RESET:
1900                         TLan_PhyReset( dev );
1901                         break;
1902                 case TLAN_TIMER_PHY_START_LINK:
1903                         TLan_PhyStartLink( dev );
1904                         break;
1905                 case TLAN_TIMER_PHY_FINISH_AN:
1906                         TLan_PhyFinishAutoNeg( dev );
1907                         break;
1908                 case TLAN_TIMER_FINISH_RESET:
1909                         TLan_FinishReset( dev );
1910                         break;
1911                 case TLAN_TIMER_ACTIVITY:
1912                         spin_lock_irqsave(&priv->lock, flags);
1913                         if ( priv->timer.function == NULL ) {
1914                                 elapsed = jiffies - priv->timerSetAt;
1915                                 if ( elapsed >= TLAN_TIMER_ACT_DELAY ) {
1916                                         TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
1917                                 } else  {
1918                                         priv->timer.function = &TLan_Timer;
1919                                         priv->timer.expires = priv->timerSetAt + TLAN_TIMER_ACT_DELAY;
1920                                         spin_unlock_irqrestore(&priv->lock, flags);
1921                                         add_timer( &priv->timer );
1922                                         break;
1923                                 }
1924                         }
1925                         spin_unlock_irqrestore(&priv->lock, flags);
1926                         break;
1927                 default:
1928                         break;
1929         }
1930
1931 } /* TLan_Timer */
1932
1933
1934
1935
1936 /*****************************************************************************
1937 ******************************************************************************
1938
1939         ThunderLAN Driver Adapter Related Routines
1940
1941 ******************************************************************************
1942 *****************************************************************************/
1943
1944
1945         /***************************************************************
1946          *      TLan_ResetLists
1947          *  
1948          *      Returns:
1949          *              Nothing
1950          *      Parms:
1951          *              dev     The device structure with the list
1952          *                      stuctures to be reset.
1953          *
1954          *      This routine sets the variables associated with managing
1955          *      the TLAN lists to their initial values.
1956          *
1957          **************************************************************/
1958
1959 void TLan_ResetLists( struct net_device *dev )
1960 {
1961         TLanPrivateInfo *priv = netdev_priv(dev);
1962         int             i;
1963         TLanList        *list;
1964         dma_addr_t      list_phys;
1965         struct sk_buff  *skb;
1966         void            *t = NULL;
1967
1968         priv->txHead = 0;
1969         priv->txTail = 0;
1970         for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
1971                 list = priv->txList + i;
1972                 list->cStat = TLAN_CSTAT_UNUSED;
1973                 if ( bbuf ) {
1974                         list->buffer[0].address = priv->txBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
1975                 } else {
1976                         list->buffer[0].address = 0;
1977                 }
1978                 list->buffer[2].count = 0;
1979                 list->buffer[2].address = 0;
1980                 list->buffer[8].address = 0;
1981                 list->buffer[9].address = 0;
1982         }
1983
1984         priv->rxHead = 0;
1985         priv->rxTail = TLAN_NUM_RX_LISTS - 1;
1986         for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
1987                 list = priv->rxList + i;
1988                 list_phys = priv->rxListDMA + sizeof(TLanList) * i;
1989                 list->cStat = TLAN_CSTAT_READY;
1990                 list->frameSize = TLAN_MAX_FRAME_SIZE;
1991                 list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
1992                 if ( bbuf ) {
1993                         list->buffer[0].address = priv->rxBufferDMA + ( i * TLAN_MAX_FRAME_SIZE );
1994                 } else {
1995                         skb = dev_alloc_skb( TLAN_MAX_FRAME_SIZE + 7 );
1996                         if ( skb == NULL ) {
1997                                 printk( "TLAN:  Couldn't allocate memory for received data.\n" );
1998                                 /* If this ever happened it would be a problem */
1999                         } else {
2000                                 skb->dev = dev;
2001                                 skb_reserve( skb, 2 );
2002                                 t = (void *) skb_put( skb, TLAN_MAX_FRAME_SIZE );
2003                         }
2004                         list->buffer[0].address = pci_map_single(priv->pciDev, t, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
2005                         list->buffer[8].address = (u32) t;
2006                         TLan_StoreSKB(list, skb);
2007                 }
2008                 list->buffer[1].count = 0;
2009                 list->buffer[1].address = 0;
2010                 if ( i < TLAN_NUM_RX_LISTS - 1 )
2011                         list->forward = list_phys + sizeof(TLanList);
2012                 else
2013                         list->forward = 0;
2014         }
2015
2016 } /* TLan_ResetLists */
2017
2018
2019 void TLan_FreeLists( struct net_device *dev )
2020 {
2021         TLanPrivateInfo *priv = netdev_priv(dev);
2022         int             i;
2023         TLanList        *list;
2024         struct sk_buff  *skb;
2025
2026         if ( ! bbuf ) {
2027                 for ( i = 0; i < TLAN_NUM_TX_LISTS; i++ ) {
2028                         list = priv->txList + i;
2029                         skb = TLan_GetSKB(list);
2030                         if ( skb ) {
2031                                 pci_unmap_single(priv->pciDev, list->buffer[0].address, skb->len, PCI_DMA_TODEVICE);
2032                                 dev_kfree_skb_any( skb );
2033                                 list->buffer[8].address = 0;
2034                                 list->buffer[9].address = 0;
2035                         }
2036                 }
2037
2038                 for ( i = 0; i < TLAN_NUM_RX_LISTS; i++ ) {
2039                         list = priv->rxList + i;
2040                         skb = TLan_GetSKB(list);
2041                         if ( skb ) {
2042                                 pci_unmap_single(priv->pciDev, list->buffer[0].address, TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
2043                                 dev_kfree_skb_any( skb );
2044                                 list->buffer[8].address = 0;
2045                                 list->buffer[9].address = 0;
2046                         }
2047                 }
2048         }
2049 } /* TLan_FreeLists */
2050
2051
2052
2053
2054         /***************************************************************
2055          *      TLan_PrintDio
2056          *  
2057          *      Returns:
2058          *              Nothing
2059          *      Parms:
2060          *              io_base         Base IO port of the device of
2061          *                              which to print DIO registers.
2062          *
2063          *      This function prints out all the internal (DIO)
2064          *      registers of a TLAN chip.
2065          *
2066          **************************************************************/
2067
2068 void TLan_PrintDio( u16 io_base )
2069 {
2070         u32 data0, data1;
2071         int     i;
2072
2073         printk( "TLAN:   Contents of internal registers for io base 0x%04hx.\n", io_base );
2074         printk( "TLAN:      Off.  +0         +4\n" );
2075         for ( i = 0; i < 0x4C; i+= 8 ) {
2076                 data0 = TLan_DioRead32( io_base, i );
2077                 data1 = TLan_DioRead32( io_base, i + 0x4 );
2078                 printk( "TLAN:      0x%02x  0x%08x 0x%08x\n", i, data0, data1 );
2079         }
2080
2081 } /* TLan_PrintDio */
2082
2083
2084
2085
2086         /***************************************************************
2087          *      TLan_PrintList
2088          *  
2089          *      Returns:
2090          *              Nothing
2091          *      Parms:
2092          *              list    A pointer to the TLanList structure to
2093          *                      be printed.
2094          *              type    A string to designate type of list,
2095          *                      "Rx" or "Tx".
2096          *              num     The index of the list.
2097          *
2098          *      This function prints out the contents of the list
2099          *      pointed to by the list parameter.
2100          *
2101          **************************************************************/
2102
2103 void TLan_PrintList( TLanList *list, char *type, int num)
2104 {
2105         int i;
2106
2107         printk( "TLAN:   %s List %d at 0x%08x\n", type, num, (u32) list );
2108         printk( "TLAN:      Forward    = 0x%08x\n",  list->forward );
2109         printk( "TLAN:      CSTAT      = 0x%04hx\n", list->cStat );
2110         printk( "TLAN:      Frame Size = 0x%04hx\n", list->frameSize );
2111         /* for ( i = 0; i < 10; i++ ) { */
2112         for ( i = 0; i < 2; i++ ) {
2113                 printk( "TLAN:      Buffer[%d].count, addr = 0x%08x, 0x%08x\n", i, list->buffer[i].count, list->buffer[i].address );
2114         }
2115
2116 } /* TLan_PrintList */
2117
2118
2119
2120
2121         /***************************************************************
2122          *      TLan_ReadAndClearStats
2123          *
2124          *      Returns:
2125          *              Nothing
2126          *      Parms:
2127          *              dev     Pointer to device structure of adapter
2128          *                      to which to read stats.
2129          *              record  Flag indicating whether to add 
2130          *
2131          *      This functions reads all the internal status registers
2132          *      of the TLAN chip, which clears them as a side effect.
2133          *      It then either adds the values to the device's status
2134          *      struct, or discards them, depending on whether record
2135          *      is TLAN_RECORD (!=0)  or TLAN_IGNORE (==0).
2136          *
2137          **************************************************************/
2138
2139 void TLan_ReadAndClearStats( struct net_device *dev, int record )
2140 {
2141         TLanPrivateInfo *priv = netdev_priv(dev);
2142         u32             tx_good, tx_under;
2143         u32             rx_good, rx_over;
2144         u32             def_tx, crc, code;
2145         u32             multi_col, single_col;
2146         u32             excess_col, late_col, loss;
2147
2148         outw( TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2149         tx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
2150         tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2151         tx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2152         tx_under = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2153
2154         outw( TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR );
2155         rx_good  = inb( dev->base_addr + TLAN_DIO_DATA );
2156         rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2157         rx_good += inb( dev->base_addr + TLAN_DIO_DATA + 2 ) << 16;
2158         rx_over  = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2159                 
2160         outw( TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR );
2161         def_tx  = inb( dev->base_addr + TLAN_DIO_DATA );
2162         def_tx += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2163         crc     = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2164         code    = inb( dev->base_addr + TLAN_DIO_DATA + 3 );
2165         
2166         outw( TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2167         multi_col   = inb( dev->base_addr + TLAN_DIO_DATA );
2168         multi_col  += inb( dev->base_addr + TLAN_DIO_DATA + 1 ) << 8;
2169         single_col  = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2170         single_col += inb( dev->base_addr + TLAN_DIO_DATA + 3 ) << 8;
2171
2172         outw( TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR );
2173         excess_col = inb( dev->base_addr + TLAN_DIO_DATA );
2174         late_col   = inb( dev->base_addr + TLAN_DIO_DATA + 1 );
2175         loss       = inb( dev->base_addr + TLAN_DIO_DATA + 2 );
2176
2177         if ( record ) {
2178                 priv->stats.rx_packets += rx_good;
2179                 priv->stats.rx_errors  += rx_over + crc + code;
2180                 priv->stats.tx_packets += tx_good;
2181                 priv->stats.tx_errors  += tx_under + loss;
2182                 priv->stats.collisions += multi_col + single_col + excess_col + late_col;
2183
2184                 priv->stats.rx_over_errors    += rx_over;
2185                 priv->stats.rx_crc_errors     += crc;
2186                 priv->stats.rx_frame_errors   += code;
2187
2188                 priv->stats.tx_aborted_errors += tx_under;
2189                 priv->stats.tx_carrier_errors += loss;
2190         }
2191                         
2192 } /* TLan_ReadAndClearStats */
2193
2194
2195
2196
2197         /***************************************************************
2198          *      TLan_Reset
2199          *
2200          *      Returns:
2201          *              0
2202          *      Parms:
2203          *              dev     Pointer to device structure of adapter
2204          *                      to be reset.
2205          *
2206          *      This function resets the adapter and it's physical
2207          *      device.  See Chap. 3, pp. 9-10 of the "ThunderLAN
2208          *      Programmer's Guide" for details.  The routine tries to
2209          *      implement what is detailed there, though adjustments
2210          *      have been made.
2211          *
2212          **************************************************************/
2213
2214 void
2215 TLan_ResetAdapter( struct net_device *dev )
2216 {
2217         TLanPrivateInfo *priv = netdev_priv(dev);
2218         int             i;
2219         u32             addr;
2220         u32             data;
2221         u8              data8;
2222
2223         priv->tlanFullDuplex = FALSE;
2224         priv->phyOnline=0;
2225         netif_carrier_off(dev);
2226
2227 /*  1.  Assert reset bit. */
2228
2229         data = inl(dev->base_addr + TLAN_HOST_CMD);
2230         data |= TLAN_HC_AD_RST;
2231         outl(data, dev->base_addr + TLAN_HOST_CMD);
2232         
2233         udelay(1000);
2234
2235 /*  2.  Turn off interrupts. ( Probably isn't necessary ) */
2236
2237         data = inl(dev->base_addr + TLAN_HOST_CMD);
2238         data |= TLAN_HC_INT_OFF;
2239         outl(data, dev->base_addr + TLAN_HOST_CMD);
2240
2241 /*  3.  Clear AREGs and HASHs. */
2242
2243         for ( i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4 ) {
2244                 TLan_DioWrite32( dev->base_addr, (u16) i, 0 );
2245         }
2246
2247 /*  4.  Setup NetConfig register. */
2248
2249         data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2250         TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2251
2252 /*  5.  Load Ld_Tmr and Ld_Thr in HOST_CMD. */
2253
2254         outl( TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD );
2255         outl( TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD );
2256
2257 /*  6.  Unreset the MII by setting NMRST (in NetSio) to 1. */
2258
2259         outw( TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR );
2260         addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2261         TLan_SetBit( TLAN_NET_SIO_NMRST, addr );
2262
2263 /*  7.  Setup the remaining registers. */
2264
2265         if ( priv->tlanRev >= 0x30 ) {
2266                 data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
2267                 TLan_DioWrite8( dev->base_addr, TLAN_INT_DIS, data8 );
2268         }
2269         TLan_PhyDetect( dev );
2270         data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
2271         
2272         if ( priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY ) {
2273                 data |= TLAN_NET_CFG_BIT;
2274                 if ( priv->aui == 1 ) {
2275                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x0a );
2276                 } else if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2277                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x00 );
2278                         priv->tlanFullDuplex = TRUE;
2279                 } else {
2280                         TLan_DioWrite8( dev->base_addr, TLAN_ACOMMIT, 0x08 );
2281                 }
2282         }
2283
2284         if ( priv->phyNum == 0 ) {
2285                 data |= TLAN_NET_CFG_PHY_EN;
2286         }
2287         TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, (u16) data );
2288
2289         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2290                 TLan_FinishReset( dev );
2291         } else {
2292                 TLan_PhyPowerDown( dev );
2293         }
2294
2295 } /* TLan_ResetAdapter */
2296
2297
2298
2299
2300 void
2301 TLan_FinishReset( struct net_device *dev )
2302 {
2303         TLanPrivateInfo *priv = netdev_priv(dev);
2304         u8              data;
2305         u32             phy;
2306         u8              sio;
2307         u16             status;
2308         u16             partner;
2309         u16             tlphy_ctl;
2310         u16             tlphy_par;
2311         u16             tlphy_id1, tlphy_id2;
2312         int             i;
2313
2314         phy = priv->phy[priv->phyNum];
2315
2316         data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
2317         if ( priv->tlanFullDuplex ) {
2318                 data |= TLAN_NET_CMD_DUPLEX;
2319         }
2320         TLan_DioWrite8( dev->base_addr, TLAN_NET_CMD, data );
2321         data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5; 
2322         if ( priv->phyNum == 0 ) {
2323                 data |= TLAN_NET_MASK_MASK7; 
2324         }
2325         TLan_DioWrite8( dev->base_addr, TLAN_NET_MASK, data );
2326         TLan_DioWrite16( dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7 );
2327         TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &tlphy_id1 );
2328         TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &tlphy_id2 );
2329         
2330         if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) || ( priv->aui ) ) {
2331                 status = MII_GS_LINK;
2332                 printk( "TLAN:  %s: Link forced.\n", dev->name );
2333         } else {
2334                 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2335                 udelay( 1000 );
2336                 TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2337                 if ( (status & MII_GS_LINK) &&   /* We only support link info on Nat.Sem. PHY's */ 
2338                         (tlphy_id1 == NAT_SEM_ID1) &&
2339                         (tlphy_id2 == NAT_SEM_ID2) ) {
2340                         TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
2341                         TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
2342                         
2343                         printk( "TLAN: %s: Link active with ", dev->name );
2344                         if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
2345                                  printk( "forced 10%sMbps %s-Duplex\n", 
2346                                                 tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2347                                                 tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2348                         } else {
2349                                 printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
2350                                                 tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
2351                                                 tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
2352                                 printk("TLAN: Partner capability: ");
2353                                         for (i = 5; i <= 10; i++)
2354                                                 if (partner & (1<<i))
2355                                                         printk("%s",media[i-5]);
2356                                 printk("\n");
2357                         }
2358
2359                         TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2360 #ifdef MONITOR                  
2361                         /* We have link beat..for now anyway */
2362                         priv->link = 1;
2363                         /*Enabling link beat monitoring */
2364                         TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
2365 #endif 
2366                 } else if (status & MII_GS_LINK)  {
2367                         printk( "TLAN: %s: Link active\n", dev->name );
2368                         TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
2369                 }
2370         }
2371
2372         if ( priv->phyNum == 0 ) {
2373                 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl );
2374                 tlphy_ctl |= TLAN_TC_INTEN;
2375                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl );
2376                 sio = TLan_DioRead8( dev->base_addr, TLAN_NET_SIO );
2377                 sio |= TLAN_NET_SIO_MINTEN;
2378                 TLan_DioWrite8( dev->base_addr, TLAN_NET_SIO, sio );
2379         }
2380
2381         if ( status & MII_GS_LINK ) {
2382                 TLan_SetMac( dev, 0, dev->dev_addr );
2383                 priv->phyOnline = 1;
2384                 outb( ( TLAN_HC_INT_ON >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2385                 if ( debug >= 1 && debug != TLAN_DEBUG_PROBE ) {
2386                         outb( ( TLAN_HC_REQ_INT >> 8 ), dev->base_addr + TLAN_HOST_CMD + 1 );
2387                 }
2388                 outl( priv->rxListDMA, dev->base_addr + TLAN_CH_PARM );
2389                 outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
2390                 netif_carrier_on(dev);
2391         } else {
2392                 printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n", dev->name );
2393                 TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
2394                 return;
2395         }
2396         TLan_SetMulticastList(dev);
2397
2398 } /* TLan_FinishReset */
2399
2400
2401
2402
2403         /***************************************************************
2404          *      TLan_SetMac
2405          *
2406          *      Returns:
2407          *              Nothing
2408          *      Parms:
2409          *              dev     Pointer to device structure of adapter
2410          *                      on which to change the AREG.
2411          *              areg    The AREG to set the address in (0 - 3).
2412          *              mac     A pointer to an array of chars.  Each
2413          *                      element stores one byte of the address.
2414          *                      IE, it isn't in ascii.
2415          *
2416          *      This function transfers a MAC address to one of the
2417          *      TLAN AREGs (address registers).  The TLAN chip locks
2418          *      the register on writing to offset 0 and unlocks the
2419          *      register after writing to offset 5.  If NULL is passed
2420          *      in mac, then the AREG is filled with 0's.
2421          *
2422          **************************************************************/
2423
2424 void TLan_SetMac( struct net_device *dev, int areg, char *mac )
2425 {
2426         int i;
2427                         
2428         areg *= 6;
2429
2430         if ( mac != NULL ) {
2431                 for ( i = 0; i < 6; i++ )
2432                         TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, mac[i] );
2433         } else {
2434                 for ( i = 0; i < 6; i++ )
2435                         TLan_DioWrite8( dev->base_addr, TLAN_AREG_0 + areg + i, 0 );
2436         }
2437
2438 } /* TLan_SetMac */
2439
2440
2441
2442
2443 /*****************************************************************************
2444 ******************************************************************************
2445
2446         ThunderLAN Driver PHY Layer Routines
2447
2448 ******************************************************************************
2449 *****************************************************************************/
2450
2451
2452
2453         /*********************************************************************
2454          *      TLan_PhyPrint
2455          *
2456          *      Returns:
2457          *              Nothing
2458          *      Parms:
2459          *              dev     A pointer to the device structure of the
2460          *                      TLAN device having the PHYs to be detailed.
2461          *                              
2462          *      This function prints the registers a PHY (aka transceiver).
2463          *
2464          ********************************************************************/
2465
2466 void TLan_PhyPrint( struct net_device *dev )
2467 {
2468         TLanPrivateInfo *priv = netdev_priv(dev);
2469         u16 i, data0, data1, data2, data3, phy;
2470
2471         phy = priv->phy[priv->phyNum];
2472
2473         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2474                 printk( "TLAN:   Device %s, Unmanaged PHY.\n", dev->name );
2475         } else if ( phy <= TLAN_PHY_MAX_ADDR ) {
2476                 printk( "TLAN:   Device %s, PHY 0x%02x.\n", dev->name, phy );
2477                 printk( "TLAN:      Off.  +0     +1     +2     +3 \n" );
2478                 for ( i = 0; i < 0x20; i+= 4 ) {
2479                         printk( "TLAN:      0x%02x", i );
2480                         TLan_MiiReadReg( dev, phy, i, &data0 );
2481                         printk( " 0x%04hx", data0 );
2482                         TLan_MiiReadReg( dev, phy, i + 1, &data1 );
2483                         printk( " 0x%04hx", data1 );
2484                         TLan_MiiReadReg( dev, phy, i + 2, &data2 );
2485                         printk( " 0x%04hx", data2 );
2486                         TLan_MiiReadReg( dev, phy, i + 3, &data3 );
2487                         printk( " 0x%04hx\n", data3 );
2488                 }
2489         } else {
2490                 printk( "TLAN:   Device %s, Invalid PHY.\n", dev->name );
2491         }
2492
2493 } /* TLan_PhyPrint */
2494
2495
2496
2497
2498         /*********************************************************************
2499          *      TLan_PhyDetect
2500          *
2501          *      Returns:
2502          *              Nothing
2503          *      Parms:
2504          *              dev     A pointer to the device structure of the adapter
2505          *                      for which the PHY needs determined.
2506          *
2507          *      So far I've found that adapters which have external PHYs
2508          *      may also use the internal PHY for part of the functionality.
2509          *      (eg, AUI/Thinnet).  This function finds out if this TLAN
2510          *      chip has an internal PHY, and then finds the first external
2511          *      PHY (starting from address 0) if it exists).
2512          *
2513          ********************************************************************/
2514
2515 void TLan_PhyDetect( struct net_device *dev )
2516 {
2517         TLanPrivateInfo *priv = netdev_priv(dev);
2518         u16             control;
2519         u16             hi;
2520         u16             lo;
2521         u32             phy;
2522
2523         if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
2524                 priv->phyNum = 0xFFFF;
2525                 return;
2526         }
2527
2528         TLan_MiiReadReg( dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi );
2529         
2530         if ( hi != 0xFFFF ) {
2531                 priv->phy[0] = TLAN_PHY_MAX_ADDR;
2532         } else {
2533                 priv->phy[0] = TLAN_PHY_NONE;
2534         }
2535
2536         priv->phy[1] = TLAN_PHY_NONE;
2537         for ( phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++ ) {
2538                 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &control );
2539                 TLan_MiiReadReg( dev, phy, MII_GEN_ID_HI, &hi );
2540                 TLan_MiiReadReg( dev, phy, MII_GEN_ID_LO, &lo );
2541                 if ( ( control != 0xFFFF ) || ( hi != 0xFFFF ) || ( lo != 0xFFFF ) ) {
2542                         TLAN_DBG( TLAN_DEBUG_GNRL, "PHY found at %02x %04x %04x %04x\n", phy, control, hi, lo );
2543                         if ( ( priv->phy[1] == TLAN_PHY_NONE ) && ( phy != TLAN_PHY_MAX_ADDR ) ) {
2544                                 priv->phy[1] = phy;
2545                         }
2546                 }
2547         }
2548
2549         if ( priv->phy[1] != TLAN_PHY_NONE ) {
2550                 priv->phyNum = 1;
2551         } else if ( priv->phy[0] != TLAN_PHY_NONE ) {
2552                 priv->phyNum = 0;
2553         } else {
2554                 printk( "TLAN:  Cannot initialize device, no PHY was found!\n" );
2555         }
2556
2557 } /* TLan_PhyDetect */
2558
2559
2560
2561
2562 void TLan_PhyPowerDown( struct net_device *dev )
2563 {
2564         TLanPrivateInfo *priv = netdev_priv(dev);
2565         u16             value;
2566
2567         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name );
2568         value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
2569         TLan_MiiSync( dev->base_addr );
2570         TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2571         if ( ( priv->phyNum == 0 ) && ( priv->phy[1] != TLAN_PHY_NONE ) && ( ! ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) ) ) {
2572                 TLan_MiiSync( dev->base_addr );
2573                 TLan_MiiWriteReg( dev, priv->phy[1], MII_GEN_CTL, value );
2574         }
2575
2576         /* Wait for 50 ms and powerup
2577          * This is abitrary.  It is intended to make sure the
2578          * transceiver settles.
2579          */
2580         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_PUP );
2581
2582 } /* TLan_PhyPowerDown */
2583
2584
2585
2586
2587 void TLan_PhyPowerUp( struct net_device *dev )
2588 {
2589         TLanPrivateInfo *priv = netdev_priv(dev);
2590         u16             value;
2591
2592         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name );
2593         TLan_MiiSync( dev->base_addr );
2594         value = MII_GC_LOOPBK;
2595         TLan_MiiWriteReg( dev, priv->phy[priv->phyNum], MII_GEN_CTL, value );
2596         TLan_MiiSync(dev->base_addr);
2597         /* Wait for 500 ms and reset the
2598          * transceiver.  The TLAN docs say both 50 ms and
2599          * 500 ms, so do the longer, just in case.
2600          */
2601         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_RESET );
2602
2603 } /* TLan_PhyPowerUp */
2604
2605
2606
2607
2608 void TLan_PhyReset( struct net_device *dev )
2609 {
2610         TLanPrivateInfo *priv = netdev_priv(dev);
2611         u16             phy;
2612         u16             value;
2613
2614         phy = priv->phy[priv->phyNum];
2615
2616         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Reseting PHY.\n", dev->name );
2617         TLan_MiiSync( dev->base_addr );
2618         value = MII_GC_LOOPBK | MII_GC_RESET;
2619         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, value );
2620         TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2621         while ( value & MII_GC_RESET ) {
2622                 TLan_MiiReadReg( dev, phy, MII_GEN_CTL, &value );
2623         }
2624
2625         /* Wait for 500 ms and initialize.
2626          * I don't remember why I wait this long.
2627          * I've changed this to 50ms, as it seems long enough.
2628          */
2629         TLan_SetTimer( dev, (HZ/20), TLAN_TIMER_PHY_START_LINK );
2630
2631 } /* TLan_PhyReset */
2632
2633
2634
2635
2636 void TLan_PhyStartLink( struct net_device *dev )
2637 {
2638         TLanPrivateInfo *priv = netdev_priv(dev);
2639         u16             ability;
2640         u16             control;
2641         u16             data;
2642         u16             phy;
2643         u16             status;
2644         u16             tctl;
2645
2646         phy = priv->phy[priv->phyNum];
2647         TLAN_DBG( TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name );
2648         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2649         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &ability );
2650
2651         if ( ( status & MII_GS_AUTONEG ) && 
2652              ( ! priv->aui ) ) {
2653                 ability = status >> 11;
2654                 if ( priv->speed  == TLAN_SPEED_10 && 
2655                      priv->duplex == TLAN_DUPLEX_HALF) {
2656                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0000);
2657                 } else if ( priv->speed == TLAN_SPEED_10 &&
2658                             priv->duplex == TLAN_DUPLEX_FULL) {
2659                         priv->tlanFullDuplex = TRUE;
2660                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x0100);
2661                 } else if ( priv->speed == TLAN_SPEED_100 &&
2662                             priv->duplex == TLAN_DUPLEX_HALF) {
2663                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2000);
2664                 } else if ( priv->speed == TLAN_SPEED_100 &&
2665                             priv->duplex == TLAN_DUPLEX_FULL) {
2666                         priv->tlanFullDuplex = TRUE;
2667                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x2100);
2668                 } else {
2669         
2670                         /* Set Auto-Neg advertisement */
2671                         TLan_MiiWriteReg( dev, phy, MII_AN_ADV, (ability << 5) | 1);
2672                         /* Enablee Auto-Neg */
2673                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1000 );
2674                         /* Restart Auto-Neg */
2675                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, 0x1200 );
2676                         /* Wait for 4 sec for autonegotiation
2677                         * to complete.  The max spec time is less than this
2678                         * but the card need additional time to start AN.
2679                         * .5 sec should be plenty extra.
2680                         */
2681                         printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
2682                         TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
2683                         return;
2684                 }
2685                 
2686         }       
2687         
2688         if ( ( priv->aui ) && ( priv->phyNum != 0 ) ) {
2689                 priv->phyNum = 0;
2690                 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2691                 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2692                 TLan_SetTimer( dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2693                 return;
2694         }  else if ( priv->phyNum == 0 ) {
2695                 control = 0;
2696                 TLan_MiiReadReg( dev, phy, TLAN_TLPHY_CTL, &tctl );
2697                 if ( priv->aui ) {
2698                         tctl |= TLAN_TC_AUISEL;
2699                 } else { 
2700                         tctl &= ~TLAN_TC_AUISEL;
2701                         if ( priv->duplex == TLAN_DUPLEX_FULL ) {
2702                                 control |= MII_GC_DUPLEX;
2703                                 priv->tlanFullDuplex = TRUE;
2704                         }
2705                         if ( priv->speed == TLAN_SPEED_100 ) {
2706                                 control |= MII_GC_SPEEDSEL;
2707                         }
2708                 }
2709                 TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, control );
2710                 TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tctl );
2711         }
2712
2713         /* Wait for 2 sec to give the transceiver time
2714          * to establish link.
2715          */
2716         TLan_SetTimer( dev, (4*HZ), TLAN_TIMER_FINISH_RESET );
2717
2718 } /* TLan_PhyStartLink */
2719
2720
2721
2722
2723 void TLan_PhyFinishAutoNeg( struct net_device *dev )
2724 {
2725         TLanPrivateInfo *priv = netdev_priv(dev);
2726         u16             an_adv;
2727         u16             an_lpa;
2728         u16             data;
2729         u16             mode;
2730         u16             phy;
2731         u16             status;
2732         
2733         phy = priv->phy[priv->phyNum];
2734
2735         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2736         udelay( 1000 );
2737         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
2738
2739         if ( ! ( status & MII_GS_AUTOCMPLT ) ) {
2740                 /* Wait for 8 sec to give the process
2741                  * more time.  Perhaps we should fail after a while.
2742                  */
2743                  if (!priv->neg_be_verbose++) {
2744                          printk(KERN_INFO "TLAN:  Giving autonegotiation more time.\n");
2745                          printk(KERN_INFO "TLAN:  Please check that your adapter has\n");
2746                          printk(KERN_INFO "TLAN:  been properly connected to a HUB or Switch.\n");
2747                          printk(KERN_INFO "TLAN:  Trying to establish link in the background...\n");
2748                  }
2749                 TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
2750                 return;
2751         }
2752
2753         printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
2754         TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
2755         TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
2756         mode = an_adv & an_lpa & 0x03E0;
2757         if ( mode & 0x0100 ) {
2758                 priv->tlanFullDuplex = TRUE;
2759         } else if ( ! ( mode & 0x0080 ) && ( mode & 0x0040 ) ) {
2760                 priv->tlanFullDuplex = TRUE;
2761         }
2762
2763         if ( ( ! ( mode & 0x0180 ) ) && ( priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10 ) && ( priv->phyNum != 0 ) ) {
2764                 priv->phyNum = 0;
2765                 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2766                 TLan_DioWrite16( dev->base_addr, TLAN_NET_CONFIG, data );
2767                 TLan_SetTimer( dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN );
2768                 return;
2769         }
2770
2771         if ( priv->phyNum == 0 ) {
2772                 if ( ( priv->duplex == TLAN_DUPLEX_FULL ) || ( an_adv & an_lpa & 0x0040 ) ) {
2773                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB | MII_GC_DUPLEX );
2774                         printk( "TLAN:  Starting internal PHY with FULL-DUPLEX\n" );
2775                 } else {
2776                         TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
2777                         printk( "TLAN:  Starting internal PHY with HALF-DUPLEX\n" );
2778                 }
2779         }
2780
2781         /* Wait for 100 ms.  No reason in partiticular.
2782          */
2783         TLan_SetTimer( dev, (HZ/10), TLAN_TIMER_FINISH_RESET );
2784                 
2785 } /* TLan_PhyFinishAutoNeg */
2786
2787 #ifdef MONITOR
2788
2789         /*********************************************************************
2790         *
2791         *      TLan_phyMonitor
2792         *
2793         *      Returns: 
2794         *              None
2795         *
2796         *      Params:
2797         *              dev             The device structure of this device.
2798         *
2799         *      
2800         *      This function monitors PHY condition by reading the status
2801         *      register via the MII bus. This can be used to give info
2802         *      about link changes (up/down), and possible switch to alternate
2803         *      media.
2804         *
2805         * ******************************************************************/
2806
2807 void TLan_PhyMonitor( struct net_device *dev )
2808 {
2809         TLanPrivateInfo *priv = netdev_priv(dev);
2810         u16     phy;
2811         u16     phy_status;
2812
2813         phy = priv->phy[priv->phyNum];
2814
2815         /* Get PHY status register */
2816         TLan_MiiReadReg( dev, phy, MII_GEN_STS, &phy_status );
2817
2818         /* Check if link has been lost */
2819         if (!(phy_status & MII_GS_LINK)) { 
2820                if (priv->link) {
2821                       priv->link = 0;
2822                       printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
2823                       netif_carrier_off(dev);
2824                       TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2825                       return;
2826                 }
2827         }
2828
2829         /* Link restablished? */
2830         if ((phy_status & MII_GS_LINK) && !priv->link) {
2831                 priv->link = 1;
2832                 printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
2833                 netif_carrier_on(dev);
2834         }
2835
2836         /* Setup a new monitor */
2837         TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
2838 }       
2839
2840 #endif /* MONITOR */
2841
2842
2843 /*****************************************************************************
2844 ******************************************************************************
2845
2846         ThunderLAN Driver MII Routines
2847
2848         These routines are based on the information in Chap. 2 of the
2849         "ThunderLAN Programmer's Guide", pp. 15-24.
2850
2851 ******************************************************************************
2852 *****************************************************************************/
2853
2854
2855         /***************************************************************
2856          *      TLan_MiiReadReg
2857          *
2858          *      Returns:
2859          *              0       if ack received ok
2860          *              1       otherwise.
2861          *
2862          *      Parms:
2863          *              dev             The device structure containing
2864          *                              The io address and interrupt count
2865          *                              for this device.
2866          *              phy             The address of the PHY to be queried.
2867          *              reg             The register whose contents are to be
2868          *                              retreived.
2869          *              val             A pointer to a variable to store the
2870          *                              retrieved value.
2871          *
2872          *      This function uses the TLAN's MII bus to retreive the contents
2873          *      of a given register on a PHY.  It sends the appropriate info
2874          *      and then reads the 16-bit register value from the MII bus via
2875          *      the TLAN SIO register.
2876          *
2877          **************************************************************/
2878
2879 int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val )
2880 {
2881         u8      nack;
2882         u16     sio, tmp;
2883         u32     i;
2884         int     err;
2885         int     minten;
2886         TLanPrivateInfo *priv = netdev_priv(dev);
2887         unsigned long flags = 0;
2888
2889         err = FALSE;
2890         outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
2891         sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2892         
2893         if (!in_irq())
2894                 spin_lock_irqsave(&priv->lock, flags);
2895
2896         TLan_MiiSync(dev->base_addr);
2897
2898         minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
2899         if ( minten )
2900                 TLan_ClearBit(TLAN_NET_SIO_MINTEN, sio);
2901
2902         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Start ( 01b ) */
2903         TLan_MiiSendData( dev->base_addr, 0x2, 2 );     /* Read  ( 10b ) */
2904         TLan_MiiSendData( dev->base_addr, phy, 5 );     /* Device #      */
2905         TLan_MiiSendData( dev->base_addr, reg, 5 );     /* Register #    */
2906
2907
2908         TLan_ClearBit(TLAN_NET_SIO_MTXEN, sio);         /* Change direction */
2909
2910         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Clock Idle bit */
2911         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2912         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Wait 300ns */
2913
2914         nack = TLan_GetBit(TLAN_NET_SIO_MDATA, sio);    /* Check for ACK */
2915         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);            /* Finish ACK */
2916         if (nack) {                                     /* No ACK, so fake it */
2917                 for (i = 0; i < 16; i++) {
2918                         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2919                         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2920                 }
2921                 tmp = 0xffff;
2922                 err = TRUE;
2923         } else {                                        /* ACK, so read data */
2924                 for (tmp = 0, i = 0x8000; i; i >>= 1) {
2925                         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);
2926                         if (TLan_GetBit(TLAN_NET_SIO_MDATA, sio))
2927                                 tmp |= i;
2928                         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2929                 }
2930         }
2931
2932
2933         TLan_ClearBit(TLAN_NET_SIO_MCLK, sio);          /* Idle cycle */
2934         TLan_SetBit(TLAN_NET_SIO_MCLK, sio);
2935
2936         if ( minten )
2937                 TLan_SetBit(TLAN_NET_SIO_MINTEN, sio);
2938
2939         *val = tmp;
2940         
2941         if (!in_irq())
2942                 spin_unlock_irqrestore(&priv->lock, flags);
2943
2944         return err;
2945
2946 } /* TLan_MiiReadReg */
2947
2948
2949
2950
2951         /***************************************************************
2952          *      TLan_MiiSendData
2953          *
2954          *      Returns:
2955          *              Nothing
2956          *      Parms:
2957          *              base_port       The base IO port of the adapter in
2958          *                              question.
2959          *              dev             The address of the PHY to be queried.
2960          *              data            The value to be placed on the MII bus.
2961          *              num_bits        The number of bits in data that are to
2962          *                              be placed on the MII bus.
2963          *
2964          *      This function sends on sequence of bits on the MII
2965          *      configuration bus.
2966          *
2967          **************************************************************/
2968
2969 void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits )
2970 {
2971         u16 sio;
2972         u32 i;
2973
2974         if ( num_bits == 0 )
2975                 return;
2976
2977         outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
2978         sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
2979         TLan_SetBit( TLAN_NET_SIO_MTXEN, sio );
2980
2981         for ( i = ( 0x1 << ( num_bits - 1 ) ); i; i >>= 1 ) {
2982                 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
2983                 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
2984                 if ( data & i )
2985                         TLan_SetBit( TLAN_NET_SIO_MDATA, sio );
2986                 else
2987                         TLan_ClearBit( TLAN_NET_SIO_MDATA, sio );
2988                 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
2989                 (void) TLan_GetBit( TLAN_NET_SIO_MCLK, sio );
2990         }
2991
2992 } /* TLan_MiiSendData */
2993
2994
2995
2996
2997         /***************************************************************
2998          *      TLan_MiiSync
2999          *
3000          *      Returns:
3001          *              Nothing
3002          *      Parms:
3003          *              base_port       The base IO port of the adapter in
3004          *                              question.
3005          *
3006          *      This functions syncs all PHYs in terms of the MII configuration
3007          *      bus.
3008          *
3009          **************************************************************/
3010
3011 void TLan_MiiSync( u16 base_port )
3012 {
3013         int i;
3014         u16 sio;
3015
3016         outw( TLAN_NET_SIO, base_port + TLAN_DIO_ADR );
3017         sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
3018
3019         TLan_ClearBit( TLAN_NET_SIO_MTXEN, sio );
3020         for ( i = 0; i < 32; i++ ) {
3021                 TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );
3022                 TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3023         }
3024
3025 } /* TLan_MiiSync */
3026
3027
3028
3029
3030         /***************************************************************
3031          *      TLan_MiiWriteReg
3032          *
3033          *      Returns:
3034          *              Nothing
3035          *      Parms:
3036          *              dev             The device structure for the device
3037          *                              to write to.
3038          *              phy             The address of the PHY to be written to.
3039          *              reg             The register whose contents are to be
3040          *                              written.
3041          *              val             The value to be written to the register.
3042          *
3043          *      This function uses the TLAN's MII bus to write the contents of a
3044          *      given register on a PHY.  It sends the appropriate info and then
3045          *      writes the 16-bit register value from the MII configuration bus
3046          *      via the TLAN SIO register.
3047          *
3048          **************************************************************/
3049
3050 void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val )
3051 {
3052         u16     sio;
3053         int     minten;
3054         unsigned long flags = 0;
3055         TLanPrivateInfo *priv = netdev_priv(dev);
3056
3057         outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
3058         sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
3059         
3060         if (!in_irq())
3061                 spin_lock_irqsave(&priv->lock, flags);
3062
3063         TLan_MiiSync( dev->base_addr );
3064
3065         minten = TLan_GetBit( TLAN_NET_SIO_MINTEN, sio );
3066         if ( minten )
3067                 TLan_ClearBit( TLAN_NET_SIO_MINTEN, sio );
3068
3069         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Start ( 01b ) */
3070         TLan_MiiSendData( dev->base_addr, 0x1, 2 );     /* Write ( 01b ) */
3071         TLan_MiiSendData( dev->base_addr, phy, 5 );     /* Device #      */
3072         TLan_MiiSendData( dev->base_addr, reg, 5 );     /* Register #    */
3073
3074         TLan_MiiSendData( dev->base_addr, 0x2, 2 );     /* Send ACK */
3075         TLan_MiiSendData( dev->base_addr, val, 16 );    /* Send Data */
3076
3077         TLan_ClearBit( TLAN_NET_SIO_MCLK, sio );        /* Idle cycle */
3078         TLan_SetBit( TLAN_NET_SIO_MCLK, sio );
3079
3080         if ( minten )
3081                 TLan_SetBit( TLAN_NET_SIO_MINTEN, sio );
3082         
3083         if (!in_irq())
3084                 spin_unlock_irqrestore(&priv->lock, flags);
3085
3086 } /* TLan_MiiWriteReg */
3087
3088
3089
3090
3091 /*****************************************************************************
3092 ******************************************************************************
3093
3094         ThunderLAN Driver Eeprom routines
3095
3096         The Compaq Netelligent 10 and 10/100 cards use a Microchip 24C02A
3097         EEPROM.  These functions are based on information in Microchip's
3098         data sheet.  I don't know how well this functions will work with
3099         other EEPROMs.
3100
3101 ******************************************************************************
3102 *****************************************************************************/
3103
3104
3105         /***************************************************************
3106          *      TLan_EeSendStart
3107          *
3108          *      Returns:
3109          *              Nothing
3110          *      Parms:  
3111          *              io_base         The IO port base address for the
3112          *                              TLAN device with the EEPROM to
3113          *                              use.
3114          *
3115          *      This function sends a start cycle to an EEPROM attached
3116          *      to a TLAN chip.
3117          *
3118          **************************************************************/
3119
3120 void TLan_EeSendStart( u16 io_base )
3121 {
3122         u16     sio;
3123
3124         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3125         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3126
3127         TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3128         TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3129         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3130         TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3131         TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3132
3133 } /* TLan_EeSendStart */
3134
3135
3136
3137
3138         /***************************************************************
3139          *      TLan_EeSendByte
3140          *
3141          *      Returns:
3142          *              If the correct ack was received, 0, otherwise 1
3143          *      Parms:  io_base         The IO port base address for the
3144          *                              TLAN device with the EEPROM to
3145          *                              use.
3146          *              data            The 8 bits of information to
3147          *                              send to the EEPROM.
3148          *              stop            If TLAN_EEPROM_STOP is passed, a
3149          *                              stop cycle is sent after the
3150          *                              byte is sent after the ack is
3151          *                              read.
3152          *
3153          *      This function sends a byte on the serial EEPROM line,
3154          *      driving the clock to send each bit. The function then
3155          *      reverses transmission direction and reads an acknowledge
3156          *      bit.
3157          *
3158          **************************************************************/
3159
3160 int TLan_EeSendByte( u16 io_base, u8 data, int stop )
3161 {
3162         int     err;
3163         u8      place;
3164         u16     sio;
3165
3166         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3167         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3168
3169         /* Assume clock is low, tx is enabled; */
3170         for ( place = 0x80; place != 0; place >>= 1 ) {
3171                 if ( place & data )
3172                         TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3173                 else
3174                         TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );
3175                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3176                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3177         }
3178         TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3179         TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3180         err = TLan_GetBit( TLAN_NET_SIO_EDATA, sio );
3181         TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3182         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3183
3184         if ( ( ! err ) && stop ) {
3185                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );       /* STOP, raise data while clock is high */
3186                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3187                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3188         }
3189
3190         return ( err );
3191
3192 } /* TLan_EeSendByte */
3193
3194
3195
3196
3197         /***************************************************************
3198          *      TLan_EeReceiveByte
3199          *
3200          *      Returns:
3201          *              Nothing
3202          *      Parms:
3203          *              io_base         The IO port base address for the
3204          *                              TLAN device with the EEPROM to
3205          *                              use.
3206          *              data            An address to a char to hold the
3207          *                              data sent from the EEPROM.
3208          *              stop            If TLAN_EEPROM_STOP is passed, a
3209          *                              stop cycle is sent after the
3210          *                              byte is received, and no ack is
3211          *                              sent.
3212          *
3213          *      This function receives 8 bits of data from the EEPROM
3214          *      over the serial link.  It then sends and ack bit, or no
3215          *      ack and a stop bit.  This function is used to retrieve
3216          *      data after the address of a byte in the EEPROM has been
3217          *      sent.
3218          *
3219          **************************************************************/
3220
3221 void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop )
3222 {
3223         u8  place;
3224         u16 sio;
3225
3226         outw( TLAN_NET_SIO, io_base + TLAN_DIO_ADR );
3227         sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3228         *data = 0;
3229
3230         /* Assume clock is low, tx is enabled; */
3231         TLan_ClearBit( TLAN_NET_SIO_ETXEN, sio );
3232         for ( place = 0x80; place; place >>= 1 ) {
3233                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3234                 if ( TLan_GetBit( TLAN_NET_SIO_EDATA, sio ) )
3235                         *data |= place;
3236                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3237         }
3238
3239         TLan_SetBit( TLAN_NET_SIO_ETXEN, sio );
3240         if ( ! stop ) {
3241                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );       /* Ack = 0 */
3242                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3243                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3244         } else {
3245                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );         /* No ack = 1 (?) */
3246                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3247                 TLan_ClearBit( TLAN_NET_SIO_ECLOK, sio );
3248                 TLan_ClearBit( TLAN_NET_SIO_EDATA, sio );       /* STOP, raise data while clock is high */
3249                 TLan_SetBit( TLAN_NET_SIO_ECLOK, sio );
3250                 TLan_SetBit( TLAN_NET_SIO_EDATA, sio );
3251         }
3252
3253 } /* TLan_EeReceiveByte */
3254
3255
3256
3257
3258         /***************************************************************
3259          *      TLan_EeReadByte
3260          *
3261          *      Returns:
3262          *              No error = 0, else, the stage at which the error
3263          *              occurred.
3264          *      Parms:
3265          *              io_base         The IO port base address for the
3266          *                              TLAN device with the EEPROM to
3267          *                              use.
3268          *              ee_addr         The address of the byte in the
3269          *                              EEPROM whose contents are to be
3270          *                              retrieved.
3271          *              data            An address to a char to hold the
3272          *                              data obtained from the EEPROM.
3273          *
3274          *      This function reads a byte of information from an byte
3275          *      cell in the EEPROM.
3276          *
3277          **************************************************************/
3278
3279 int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data )
3280 {
3281         int err;
3282         TLanPrivateInfo *priv = netdev_priv(dev);
3283         unsigned long flags = 0;
3284         int ret=0;
3285
3286         spin_lock_irqsave(&priv->lock, flags);
3287
3288         TLan_EeSendStart( dev->base_addr );
3289         err = TLan_EeSendByte( dev->base_addr, 0xA0, TLAN_EEPROM_ACK );
3290         if (err)
3291         {
3292                 ret=1;
3293                 goto fail;
3294         }
3295         err = TLan_EeSendByte( dev->base_addr, ee_addr, TLAN_EEPROM_ACK );
3296         if (err)
3297         {
3298                 ret=2;
3299                 goto fail;
3300         }
3301         TLan_EeSendStart( dev->base_addr );
3302         err = TLan_EeSendByte( dev->base_addr, 0xA1, TLAN_EEPROM_ACK );
3303         if (err)
3304         {
3305                 ret=3;
3306                 goto fail;
3307         }
3308         TLan_EeReceiveByte( dev->base_addr, data, TLAN_EEPROM_STOP );
3309 fail:
3310         spin_unlock_irqrestore(&priv->lock, flags);
3311
3312         return ret;
3313
3314 } /* TLan_EeReadByte */
3315
3316
3317