]> nv-tegra.nvidia Code Review - linux-2.6.git/blob - drivers/net/pcmcia/nmclan_cs.c
drivers/net: Kill now superfluous ->last_rx stores.
[linux-2.6.git] / drivers / net / pcmcia / nmclan_cs.c
1 /* ----------------------------------------------------------------------------
2 Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
3   nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
4
5   The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
6   Access Controller for Ethernet (MACE).  It is essentially the Am2150
7   PCMCIA Ethernet card contained in the Am2150 Demo Kit.
8
9 Written by Roger C. Pao <rpao@paonet.org>
10   Copyright 1995 Roger C. Pao
11   Linux 2.5 cleanups Copyright Red Hat 2003
12
13   This software may be used and distributed according to the terms of
14   the GNU General Public License.
15
16 Ported to Linux 1.3.* network driver environment by
17   Matti Aarnio <mea@utu.fi>
18
19 References
20
21   Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
22   Am79C940 (MACE) Data Sheet, 1994
23   Am79C90 (C-LANCE) Data Sheet, 1994
24   Linux PCMCIA Programmer's Guide v1.17
25   /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
26
27   Eric Mears, New Media Corporation
28   Tom Pollard, New Media Corporation
29   Dean Siasoyco, New Media Corporation
30   Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
31   Donald Becker <becker@scyld.com>
32   David Hinds <dahinds@users.sourceforge.net>
33
34   The Linux client driver is based on the 3c589_cs.c client driver by
35   David Hinds.
36
37   The Linux network driver outline is based on the 3c589_cs.c driver,
38   the 8390.c driver, and the example skeleton.c kernel code, which are
39   by Donald Becker.
40
41   The Am2150 network driver hardware interface code is based on the
42   OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
43
44   Special thanks for testing and help in debugging this driver goes
45   to Ken Lesniak.
46
47 -------------------------------------------------------------------------------
48 Driver Notes and Issues
49 -------------------------------------------------------------------------------
50
51 1. Developed on a Dell 320SLi
52    PCMCIA Card Services 2.6.2
53    Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
54
55 2. rc.pcmcia may require loading pcmcia_core with io_speed=300:
56    'insmod pcmcia_core.o io_speed=300'.
57    This will avoid problems with fast systems which causes rx_framecnt
58    to return random values.
59
60 3. If hot extraction does not work for you, use 'ifconfig eth0 down'
61    before extraction.
62
63 4. There is a bad slow-down problem in this driver.
64
65 5. Future: Multicast processing.  In the meantime, do _not_ compile your
66    kernel with multicast ip enabled.
67
68 -------------------------------------------------------------------------------
69 History
70 -------------------------------------------------------------------------------
71 Log: nmclan_cs.c,v
72  * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
73  * Fixed hang on card eject as we probe it
74  * Cleaned up to use new style locking.
75  *
76  * Revision 0.16  1995/07/01  06:42:17  rpao
77  * Bug fix: nmclan_reset() called CardServices incorrectly.
78  *
79  * Revision 0.15  1995/05/24  08:09:47  rpao
80  * Re-implement MULTI_TX dev->tbusy handling.
81  *
82  * Revision 0.14  1995/05/23  03:19:30  rpao
83  * Added, in nmclan_config(), "tuple.Attributes = 0;".
84  * Modified MACE ID check to ignore chip revision level.
85  * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
86  *
87  * Revision 0.13  1995/05/18  05:56:34  rpao
88  * Statistics changes.
89  * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
90  * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT.  Fixes driver lockup.
91  *
92  * Revision 0.12  1995/05/14  00:12:23  rpao
93  * Statistics overhaul.
94  *
95
96 95/05/13 rpao   V0.10a
97                 Bug fix: MACE statistics counters used wrong I/O ports.
98                 Bug fix: mace_interrupt() needed to allow statistics to be
99                 processed without RX or TX interrupts pending.
100 95/05/11 rpao   V0.10
101                 Multiple transmit request processing.
102                 Modified statistics to use MACE counters where possible.
103 95/05/10 rpao   V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
104                 *Released
105 95/05/10 rpao   V0.08
106                 Bug fix: Make all non-exported functions private by using
107                 static keyword.
108                 Bug fix: Test IntrCnt _before_ reading MACE_IR.
109 95/05/10 rpao   V0.07 Statistics.
110 95/05/09 rpao   V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
111
112 ---------------------------------------------------------------------------- */
113
114 #define DRV_NAME        "nmclan_cs"
115 #define DRV_VERSION     "0.16"
116
117
118 /* ----------------------------------------------------------------------------
119 Conditional Compilation Options
120 ---------------------------------------------------------------------------- */
121
122 #define MULTI_TX                        0
123 #define RESET_ON_TIMEOUT                1
124 #define TX_INTERRUPTABLE                1
125 #define RESET_XILINX                    0
126
127 /* ----------------------------------------------------------------------------
128 Include Files
129 ---------------------------------------------------------------------------- */
130
131 #include <linux/module.h>
132 #include <linux/kernel.h>
133 #include <linux/init.h>
134 #include <linux/ptrace.h>
135 #include <linux/slab.h>
136 #include <linux/string.h>
137 #include <linux/timer.h>
138 #include <linux/interrupt.h>
139 #include <linux/in.h>
140 #include <linux/delay.h>
141 #include <linux/ethtool.h>
142 #include <linux/netdevice.h>
143 #include <linux/etherdevice.h>
144 #include <linux/skbuff.h>
145 #include <linux/if_arp.h>
146 #include <linux/ioport.h>
147 #include <linux/bitops.h>
148
149 #include <pcmcia/cs_types.h>
150 #include <pcmcia/cs.h>
151 #include <pcmcia/cisreg.h>
152 #include <pcmcia/cistpl.h>
153 #include <pcmcia/ds.h>
154
155 #include <asm/uaccess.h>
156 #include <asm/io.h>
157 #include <asm/system.h>
158
159 /* ----------------------------------------------------------------------------
160 Defines
161 ---------------------------------------------------------------------------- */
162
163 #define ETHER_ADDR_LEN                  ETH_ALEN
164                                         /* 6 bytes in an Ethernet Address */
165 #define MACE_LADRF_LEN                  8
166                                         /* 8 bytes in Logical Address Filter */
167
168 /* Loop Control Defines */
169 #define MACE_MAX_IR_ITERATIONS          10
170 #define MACE_MAX_RX_ITERATIONS          12
171         /*
172         TBD: Dean brought this up, and I assumed the hardware would
173         handle it:
174
175         If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
176         non-zero when the isr exits.  We may not get another interrupt
177         to process the remaining packets for some time.
178         */
179
180 /*
181 The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
182 which manages the interface between the MACE and the PCMCIA bus.  It
183 also includes buffer management for the 32K x 8 SRAM to control up to
184 four transmit and 12 receive frames at a time.
185 */
186 #define AM2150_MAX_TX_FRAMES            4
187 #define AM2150_MAX_RX_FRAMES            12
188
189 /* Am2150 Ethernet Card I/O Mapping */
190 #define AM2150_RCV                      0x00
191 #define AM2150_XMT                      0x04
192 #define AM2150_XMT_SKIP                 0x09
193 #define AM2150_RCV_NEXT                 0x0A
194 #define AM2150_RCV_FRAME_COUNT          0x0B
195 #define AM2150_MACE_BANK                0x0C
196 #define AM2150_MACE_BASE                0x10
197
198 /* MACE Registers */
199 #define MACE_RCVFIFO                    0
200 #define MACE_XMTFIFO                    1
201 #define MACE_XMTFC                      2
202 #define MACE_XMTFS                      3
203 #define MACE_XMTRC                      4
204 #define MACE_RCVFC                      5
205 #define MACE_RCVFS                      6
206 #define MACE_FIFOFC                     7
207 #define MACE_IR                         8
208 #define MACE_IMR                        9
209 #define MACE_PR                         10
210 #define MACE_BIUCC                      11
211 #define MACE_FIFOCC                     12
212 #define MACE_MACCC                      13
213 #define MACE_PLSCC                      14
214 #define MACE_PHYCC                      15
215 #define MACE_CHIPIDL                    16
216 #define MACE_CHIPIDH                    17
217 #define MACE_IAC                        18
218 /* Reserved */
219 #define MACE_LADRF                      20
220 #define MACE_PADR                       21
221 /* Reserved */
222 /* Reserved */
223 #define MACE_MPC                        24
224 /* Reserved */
225 #define MACE_RNTPC                      26
226 #define MACE_RCVCC                      27
227 /* Reserved */
228 #define MACE_UTR                        29
229 #define MACE_RTR1                       30
230 #define MACE_RTR2                       31
231
232 /* MACE Bit Masks */
233 #define MACE_XMTRC_EXDEF                0x80
234 #define MACE_XMTRC_XMTRC                0x0F
235
236 #define MACE_XMTFS_XMTSV                0x80
237 #define MACE_XMTFS_UFLO                 0x40
238 #define MACE_XMTFS_LCOL                 0x20
239 #define MACE_XMTFS_MORE                 0x10
240 #define MACE_XMTFS_ONE                  0x08
241 #define MACE_XMTFS_DEFER                0x04
242 #define MACE_XMTFS_LCAR                 0x02
243 #define MACE_XMTFS_RTRY                 0x01
244
245 #define MACE_RCVFS_RCVSTS               0xF000
246 #define MACE_RCVFS_OFLO                 0x8000
247 #define MACE_RCVFS_CLSN                 0x4000
248 #define MACE_RCVFS_FRAM                 0x2000
249 #define MACE_RCVFS_FCS                  0x1000
250
251 #define MACE_FIFOFC_RCVFC               0xF0
252 #define MACE_FIFOFC_XMTFC               0x0F
253
254 #define MACE_IR_JAB                     0x80
255 #define MACE_IR_BABL                    0x40
256 #define MACE_IR_CERR                    0x20
257 #define MACE_IR_RCVCCO                  0x10
258 #define MACE_IR_RNTPCO                  0x08
259 #define MACE_IR_MPCO                    0x04
260 #define MACE_IR_RCVINT                  0x02
261 #define MACE_IR_XMTINT                  0x01
262
263 #define MACE_MACCC_PROM                 0x80
264 #define MACE_MACCC_DXMT2PD              0x40
265 #define MACE_MACCC_EMBA                 0x20
266 #define MACE_MACCC_RESERVED             0x10
267 #define MACE_MACCC_DRCVPA               0x08
268 #define MACE_MACCC_DRCVBC               0x04
269 #define MACE_MACCC_ENXMT                0x02
270 #define MACE_MACCC_ENRCV                0x01
271
272 #define MACE_PHYCC_LNKFL                0x80
273 #define MACE_PHYCC_DLNKTST              0x40
274 #define MACE_PHYCC_REVPOL               0x20
275 #define MACE_PHYCC_DAPC                 0x10
276 #define MACE_PHYCC_LRT                  0x08
277 #define MACE_PHYCC_ASEL                 0x04
278 #define MACE_PHYCC_RWAKE                0x02
279 #define MACE_PHYCC_AWAKE                0x01
280
281 #define MACE_IAC_ADDRCHG                0x80
282 #define MACE_IAC_PHYADDR                0x04
283 #define MACE_IAC_LOGADDR                0x02
284
285 #define MACE_UTR_RTRE                   0x80
286 #define MACE_UTR_RTRD                   0x40
287 #define MACE_UTR_RPA                    0x20
288 #define MACE_UTR_FCOLL                  0x10
289 #define MACE_UTR_RCVFCSE                0x08
290 #define MACE_UTR_LOOP_INCL_MENDEC       0x06
291 #define MACE_UTR_LOOP_NO_MENDEC         0x04
292 #define MACE_UTR_LOOP_EXTERNAL          0x02
293 #define MACE_UTR_LOOP_NONE              0x00
294 #define MACE_UTR_RESERVED               0x01
295
296 /* Switch MACE register bank (only 0 and 1 are valid) */
297 #define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
298
299 #define MACE_IMR_DEFAULT \
300   (0xFF - \
301     ( \
302       MACE_IR_CERR | \
303       MACE_IR_RCVCCO | \
304       MACE_IR_RNTPCO | \
305       MACE_IR_MPCO | \
306       MACE_IR_RCVINT | \
307       MACE_IR_XMTINT \
308     ) \
309   )
310 #undef MACE_IMR_DEFAULT
311 #define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
312
313 #define TX_TIMEOUT              ((400*HZ)/1000)
314
315 /* ----------------------------------------------------------------------------
316 Type Definitions
317 ---------------------------------------------------------------------------- */
318
319 typedef struct _mace_statistics {
320     /* MACE_XMTFS */
321     int xmtsv;
322     int uflo;
323     int lcol;
324     int more;
325     int one;
326     int defer;
327     int lcar;
328     int rtry;
329
330     /* MACE_XMTRC */
331     int exdef;
332     int xmtrc;
333
334     /* RFS1--Receive Status (RCVSTS) */
335     int oflo;
336     int clsn;
337     int fram;
338     int fcs;
339
340     /* RFS2--Runt Packet Count (RNTPC) */
341     int rfs_rntpc;
342
343     /* RFS3--Receive Collision Count (RCVCC) */
344     int rfs_rcvcc;
345
346     /* MACE_IR */
347     int jab;
348     int babl;
349     int cerr;
350     int rcvcco;
351     int rntpco;
352     int mpco;
353
354     /* MACE_MPC */
355     int mpc;
356
357     /* MACE_RNTPC */
358     int rntpc;
359
360     /* MACE_RCVCC */
361     int rcvcc;
362 } mace_statistics;
363
364 typedef struct _mace_private {
365         struct pcmcia_device    *p_dev;
366     dev_node_t node;
367     struct net_device_stats linux_stats; /* Linux statistics counters */
368     mace_statistics mace_stats; /* MACE chip statistics counters */
369
370     /* restore_multicast_list() state variables */
371     int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
372     int multicast_num_addrs;
373
374     char tx_free_frames; /* Number of free transmit frame buffers */
375     char tx_irq_disabled; /* MACE TX interrupt disabled */
376     
377     spinlock_t bank_lock; /* Must be held if you step off bank 0 */
378 } mace_private;
379
380 /* ----------------------------------------------------------------------------
381 Private Global Variables
382 ---------------------------------------------------------------------------- */
383
384 #ifdef PCMCIA_DEBUG
385 static char rcsid[] =
386 "nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao";
387 static char *version =
388 DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
389 #endif
390
391 static const char *if_names[]={
392     "Auto", "10baseT", "BNC",
393 };
394
395 /* ----------------------------------------------------------------------------
396 Parameters
397         These are the parameters that can be set during loading with
398         'insmod'.
399 ---------------------------------------------------------------------------- */
400
401 MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
402 MODULE_LICENSE("GPL");
403
404 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
405
406 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
407 INT_MODULE_PARM(if_port, 0);
408
409 #ifdef PCMCIA_DEBUG
410 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
411 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
412 #else
413 #define DEBUG(n, args...)
414 #endif
415
416 /* ----------------------------------------------------------------------------
417 Function Prototypes
418 ---------------------------------------------------------------------------- */
419
420 static int nmclan_config(struct pcmcia_device *link);
421 static void nmclan_release(struct pcmcia_device *link);
422
423 static void nmclan_reset(struct net_device *dev);
424 static int mace_config(struct net_device *dev, struct ifmap *map);
425 static int mace_open(struct net_device *dev);
426 static int mace_close(struct net_device *dev);
427 static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev);
428 static void mace_tx_timeout(struct net_device *dev);
429 static irqreturn_t mace_interrupt(int irq, void *dev_id);
430 static struct net_device_stats *mace_get_stats(struct net_device *dev);
431 static int mace_rx(struct net_device *dev, unsigned char RxCnt);
432 static void restore_multicast_list(struct net_device *dev);
433 static void set_multicast_list(struct net_device *dev);
434 static const struct ethtool_ops netdev_ethtool_ops;
435
436
437 static void nmclan_detach(struct pcmcia_device *p_dev);
438
439 /* ----------------------------------------------------------------------------
440 nmclan_attach
441         Creates an "instance" of the driver, allocating local data
442         structures for one device.  The device is registered with Card
443         Services.
444 ---------------------------------------------------------------------------- */
445
446 static int nmclan_probe(struct pcmcia_device *link)
447 {
448     mace_private *lp;
449     struct net_device *dev;
450
451     DEBUG(0, "nmclan_attach()\n");
452     DEBUG(1, "%s\n", rcsid);
453
454     /* Create new ethernet device */
455     dev = alloc_etherdev(sizeof(mace_private));
456     if (!dev)
457             return -ENOMEM;
458     lp = netdev_priv(dev);
459     lp->p_dev = link;
460     link->priv = dev;
461     
462     spin_lock_init(&lp->bank_lock);
463     link->io.NumPorts1 = 32;
464     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
465     link->io.IOAddrLines = 5;
466     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
467     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
468     link->irq.Handler = &mace_interrupt;
469     link->irq.Instance = dev;
470     link->conf.Attributes = CONF_ENABLE_IRQ;
471     link->conf.IntType = INT_MEMORY_AND_IO;
472     link->conf.ConfigIndex = 1;
473     link->conf.Present = PRESENT_OPTION;
474
475     lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
476
477     dev->hard_start_xmit = &mace_start_xmit;
478     dev->set_config = &mace_config;
479     dev->get_stats = &mace_get_stats;
480     dev->set_multicast_list = &set_multicast_list;
481     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
482     dev->open = &mace_open;
483     dev->stop = &mace_close;
484 #ifdef HAVE_TX_TIMEOUT
485     dev->tx_timeout = mace_tx_timeout;
486     dev->watchdog_timeo = TX_TIMEOUT;
487 #endif
488
489     return nmclan_config(link);
490 } /* nmclan_attach */
491
492 /* ----------------------------------------------------------------------------
493 nmclan_detach
494         This deletes a driver "instance".  The device is de-registered
495         with Card Services.  If it has been released, all local data
496         structures are freed.  Otherwise, the structures will be freed
497         when the device is released.
498 ---------------------------------------------------------------------------- */
499
500 static void nmclan_detach(struct pcmcia_device *link)
501 {
502     struct net_device *dev = link->priv;
503
504     DEBUG(0, "nmclan_detach(0x%p)\n", link);
505
506     if (link->dev_node)
507         unregister_netdev(dev);
508
509     nmclan_release(link);
510
511     free_netdev(dev);
512 } /* nmclan_detach */
513
514 /* ----------------------------------------------------------------------------
515 mace_read
516         Reads a MACE register.  This is bank independent; however, the
517         caller must ensure that this call is not interruptable.  We are
518         assuming that during normal operation, the MACE is always in
519         bank 0.
520 ---------------------------------------------------------------------------- */
521 static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
522 {
523   int data = 0xFF;
524   unsigned long flags;
525
526   switch (reg >> 4) {
527     case 0: /* register 0-15 */
528       data = inb(ioaddr + AM2150_MACE_BASE + reg);
529       break;
530     case 1: /* register 16-31 */
531       spin_lock_irqsave(&lp->bank_lock, flags);
532       MACEBANK(1);
533       data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
534       MACEBANK(0);
535       spin_unlock_irqrestore(&lp->bank_lock, flags);
536       break;
537   }
538   return (data & 0xFF);
539 } /* mace_read */
540
541 /* ----------------------------------------------------------------------------
542 mace_write
543         Writes to a MACE register.  This is bank independent; however,
544         the caller must ensure that this call is not interruptable.  We
545         are assuming that during normal operation, the MACE is always in
546         bank 0.
547 ---------------------------------------------------------------------------- */
548 static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
549                        int data)
550 {
551   unsigned long flags;
552
553   switch (reg >> 4) {
554     case 0: /* register 0-15 */
555       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
556       break;
557     case 1: /* register 16-31 */
558       spin_lock_irqsave(&lp->bank_lock, flags);
559       MACEBANK(1);
560       outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
561       MACEBANK(0);
562       spin_unlock_irqrestore(&lp->bank_lock, flags);
563       break;
564   }
565 } /* mace_write */
566
567 /* ----------------------------------------------------------------------------
568 mace_init
569         Resets the MACE chip.
570 ---------------------------------------------------------------------------- */
571 static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
572 {
573   int i;
574   int ct = 0;
575
576   /* MACE Software reset */
577   mace_write(lp, ioaddr, MACE_BIUCC, 1);
578   while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
579     /* Wait for reset bit to be cleared automatically after <= 200ns */;
580     if(++ct > 500)
581     {
582         printk(KERN_ERR "mace: reset failed, card removed ?\n");
583         return -1;
584     }
585     udelay(1);
586   }
587   mace_write(lp, ioaddr, MACE_BIUCC, 0);
588
589   /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
590   mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
591
592   mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
593   mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
594
595   /*
596    * Bit 2-1 PORTSEL[1-0] Port Select.
597    * 00 AUI/10Base-2
598    * 01 10Base-T
599    * 10 DAI Port (reserved in Am2150)
600    * 11 GPSI
601    * For this card, only the first two are valid.
602    * So, PLSCC should be set to
603    * 0x00 for 10Base-2
604    * 0x02 for 10Base-T
605    * Or just set ASEL in PHYCC below!
606    */
607   switch (if_port) {
608     case 1:
609       mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
610       break;
611     case 2:
612       mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
613       break;
614     default:
615       mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
616       /* ASEL Auto Select.  When set, the PORTSEL[1-0] bits are overridden,
617          and the MACE device will automatically select the operating media
618          interface port. */
619       break;
620   }
621
622   mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
623   /* Poll ADDRCHG bit */
624   ct = 0;
625   while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
626   {
627         if(++ ct > 500)
628         {
629                 printk(KERN_ERR "mace: ADDRCHG timeout, card removed ?\n");
630                 return -1;
631         }
632   }
633   /* Set PADR register */
634   for (i = 0; i < ETHER_ADDR_LEN; i++)
635     mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
636
637   /* MAC Configuration Control Register should be written last */
638   /* Let set_multicast_list set this. */
639   /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
640   mace_write(lp, ioaddr, MACE_MACCC, 0x00);
641   return 0;
642 } /* mace_init */
643
644 /* ----------------------------------------------------------------------------
645 nmclan_config
646         This routine is scheduled to run after a CARD_INSERTION event
647         is received, to configure the PCMCIA socket, and to make the
648         ethernet device available to the system.
649 ---------------------------------------------------------------------------- */
650
651 #define CS_CHECK(fn, ret) \
652   do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
653
654 static int nmclan_config(struct pcmcia_device *link)
655 {
656   struct net_device *dev = link->priv;
657   mace_private *lp = netdev_priv(dev);
658   tuple_t tuple;
659   u_char buf[64];
660   int i, last_ret, last_fn;
661   unsigned int ioaddr;
662
663   DEBUG(0, "nmclan_config(0x%p)\n", link);
664
665   CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
666   CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
667   CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
668   dev->irq = link->irq.AssignedIRQ;
669   dev->base_addr = link->io.BasePort1;
670
671   ioaddr = dev->base_addr;
672
673   /* Read the ethernet address from the CIS. */
674   tuple.DesiredTuple = 0x80 /* CISTPL_CFTABLE_ENTRY_MISC */;
675   tuple.TupleData = buf;
676   tuple.TupleDataMax = 64;
677   tuple.TupleOffset = 0;
678   tuple.Attributes = 0;
679   CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
680   CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
681   memcpy(dev->dev_addr, tuple.TupleData, ETHER_ADDR_LEN);
682
683   /* Verify configuration by reading the MACE ID. */
684   {
685     char sig[2];
686
687     sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
688     sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
689     if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
690       DEBUG(0, "nmclan_cs configured: mace id=%x %x\n",
691             sig[0], sig[1]);
692     } else {
693       printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should"
694              " be 0x40 0x?9\n", sig[0], sig[1]);
695       return -ENODEV;
696     }
697   }
698
699   if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
700         goto failed;
701
702   /* The if_port symbol can be set when the module is loaded */
703   if (if_port <= 2)
704     dev->if_port = if_port;
705   else
706     printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
707
708   link->dev_node = &lp->node;
709   SET_NETDEV_DEV(dev, &handle_to_dev(link));
710
711   i = register_netdev(dev);
712   if (i != 0) {
713     printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
714     link->dev_node = NULL;
715     goto failed;
716   }
717
718   strcpy(lp->node.dev_name, dev->name);
719
720   printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port,"
721          " hw_addr %pM\n",
722          dev->name, dev->base_addr, dev->irq, if_names[dev->if_port],
723          dev->dev_addr);
724   return 0;
725
726 cs_failed:
727         cs_error(link, last_fn, last_ret);
728 failed:
729         nmclan_release(link);
730         return -ENODEV;
731 } /* nmclan_config */
732
733 /* ----------------------------------------------------------------------------
734 nmclan_release
735         After a card is removed, nmclan_release() will unregister the
736         net device, and release the PCMCIA configuration.  If the device
737         is still open, this will be postponed until it is closed.
738 ---------------------------------------------------------------------------- */
739 static void nmclan_release(struct pcmcia_device *link)
740 {
741         DEBUG(0, "nmclan_release(0x%p)\n", link);
742         pcmcia_disable_device(link);
743 }
744
745 static int nmclan_suspend(struct pcmcia_device *link)
746 {
747         struct net_device *dev = link->priv;
748
749         if (link->open)
750                 netif_device_detach(dev);
751
752         return 0;
753 }
754
755 static int nmclan_resume(struct pcmcia_device *link)
756 {
757         struct net_device *dev = link->priv;
758
759         if (link->open) {
760                 nmclan_reset(dev);
761                 netif_device_attach(dev);
762         }
763
764         return 0;
765 }
766
767
768 /* ----------------------------------------------------------------------------
769 nmclan_reset
770         Reset and restore all of the Xilinx and MACE registers.
771 ---------------------------------------------------------------------------- */
772 static void nmclan_reset(struct net_device *dev)
773 {
774   mace_private *lp = netdev_priv(dev);
775
776 #if RESET_XILINX
777   struct pcmcia_device *link = &lp->link;
778   conf_reg_t reg;
779   u_long OrigCorValue; 
780
781   /* Save original COR value */
782   reg.Function = 0;
783   reg.Action = CS_READ;
784   reg.Offset = CISREG_COR;
785   reg.Value = 0;
786   pcmcia_access_configuration_register(link, &reg);
787   OrigCorValue = reg.Value;
788
789   /* Reset Xilinx */
790   reg.Action = CS_WRITE;
791   reg.Offset = CISREG_COR;
792   DEBUG(1, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
793         OrigCorValue);
794   reg.Value = COR_SOFT_RESET;
795   pcmcia_access_configuration_register(link, &reg);
796   /* Need to wait for 20 ms for PCMCIA to finish reset. */
797
798   /* Restore original COR configuration index */
799   reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
800   pcmcia_access_configuration_register(link, &reg);
801   /* Xilinx is now completely reset along with the MACE chip. */
802   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
803
804 #endif /* #if RESET_XILINX */
805
806   /* Xilinx is now completely reset along with the MACE chip. */
807   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
808
809   /* Reinitialize the MACE chip for operation. */
810   mace_init(lp, dev->base_addr, dev->dev_addr);
811   mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
812
813   /* Restore the multicast list and enable TX and RX. */
814   restore_multicast_list(dev);
815 } /* nmclan_reset */
816
817 /* ----------------------------------------------------------------------------
818 mace_config
819         [Someone tell me what this is supposed to do?  Is if_port a defined
820         standard?  If so, there should be defines to indicate 1=10Base-T,
821         2=10Base-2, etc. including limited automatic detection.]
822 ---------------------------------------------------------------------------- */
823 static int mace_config(struct net_device *dev, struct ifmap *map)
824 {
825   if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
826     if (map->port <= 2) {
827       dev->if_port = map->port;
828       printk(KERN_INFO "%s: switched to %s port\n", dev->name,
829              if_names[dev->if_port]);
830     } else
831       return -EINVAL;
832   }
833   return 0;
834 } /* mace_config */
835
836 /* ----------------------------------------------------------------------------
837 mace_open
838         Open device driver.
839 ---------------------------------------------------------------------------- */
840 static int mace_open(struct net_device *dev)
841 {
842   unsigned int ioaddr = dev->base_addr;
843   mace_private *lp = netdev_priv(dev);
844   struct pcmcia_device *link = lp->p_dev;
845
846   if (!pcmcia_dev_present(link))
847     return -ENODEV;
848
849   link->open++;
850
851   MACEBANK(0);
852
853   netif_start_queue(dev);
854   nmclan_reset(dev);
855
856   return 0; /* Always succeed */
857 } /* mace_open */
858
859 /* ----------------------------------------------------------------------------
860 mace_close
861         Closes device driver.
862 ---------------------------------------------------------------------------- */
863 static int mace_close(struct net_device *dev)
864 {
865   unsigned int ioaddr = dev->base_addr;
866   mace_private *lp = netdev_priv(dev);
867   struct pcmcia_device *link = lp->p_dev;
868
869   DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
870
871   /* Mask off all interrupts from the MACE chip. */
872   outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
873
874   link->open--;
875   netif_stop_queue(dev);
876
877   return 0;
878 } /* mace_close */
879
880 static void netdev_get_drvinfo(struct net_device *dev,
881                                struct ethtool_drvinfo *info)
882 {
883         strcpy(info->driver, DRV_NAME);
884         strcpy(info->version, DRV_VERSION);
885         sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
886 }
887
888 #ifdef PCMCIA_DEBUG
889 static u32 netdev_get_msglevel(struct net_device *dev)
890 {
891         return pc_debug;
892 }
893
894 static void netdev_set_msglevel(struct net_device *dev, u32 level)
895 {
896         pc_debug = level;
897 }
898 #endif /* PCMCIA_DEBUG */
899
900 static const struct ethtool_ops netdev_ethtool_ops = {
901         .get_drvinfo            = netdev_get_drvinfo,
902 #ifdef PCMCIA_DEBUG
903         .get_msglevel           = netdev_get_msglevel,
904         .set_msglevel           = netdev_set_msglevel,
905 #endif /* PCMCIA_DEBUG */
906 };
907
908 /* ----------------------------------------------------------------------------
909 mace_start_xmit
910         This routine begins the packet transmit function.  When completed,
911         it will generate a transmit interrupt.
912
913         According to /usr/src/linux/net/inet/dev.c, if _start_xmit
914         returns 0, the "packet is now solely the responsibility of the
915         driver."  If _start_xmit returns non-zero, the "transmission
916         failed, put skb back into a list."
917 ---------------------------------------------------------------------------- */
918
919 static void mace_tx_timeout(struct net_device *dev)
920 {
921   mace_private *lp = netdev_priv(dev);
922   struct pcmcia_device *link = lp->p_dev;
923
924   printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name);
925 #if RESET_ON_TIMEOUT
926   printk("resetting card\n");
927   pcmcia_reset_card(link->socket);
928 #else /* #if RESET_ON_TIMEOUT */
929   printk("NOT resetting card\n");
930 #endif /* #if RESET_ON_TIMEOUT */
931   dev->trans_start = jiffies;
932   netif_wake_queue(dev);
933 }
934
935 static int mace_start_xmit(struct sk_buff *skb, struct net_device *dev)
936 {
937   mace_private *lp = netdev_priv(dev);
938   unsigned int ioaddr = dev->base_addr;
939
940   netif_stop_queue(dev);
941
942   DEBUG(3, "%s: mace_start_xmit(length = %ld) called.\n",
943         dev->name, (long)skb->len);
944
945 #if (!TX_INTERRUPTABLE)
946   /* Disable MACE TX interrupts. */
947   outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
948     ioaddr + AM2150_MACE_BASE + MACE_IMR);
949   lp->tx_irq_disabled=1;
950 #endif /* #if (!TX_INTERRUPTABLE) */
951
952   {
953     /* This block must not be interrupted by another transmit request!
954        mace_tx_timeout will take care of timer-based retransmissions from
955        the upper layers.  The interrupt handler is guaranteed never to
956        service a transmit interrupt while we are in here.
957     */
958
959     lp->linux_stats.tx_bytes += skb->len;
960     lp->tx_free_frames--;
961
962     /* WARNING: Write the _exact_ number of bytes written in the header! */
963     /* Put out the word header [must be an outw()] . . . */
964     outw(skb->len, ioaddr + AM2150_XMT);
965     /* . . . and the packet [may be any combination of outw() and outb()] */
966     outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
967     if (skb->len & 1) {
968       /* Odd byte transfer */
969       outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
970     }
971
972     dev->trans_start = jiffies;
973
974 #if MULTI_TX
975     if (lp->tx_free_frames > 0)
976       netif_start_queue(dev);
977 #endif /* #if MULTI_TX */
978   }
979
980 #if (!TX_INTERRUPTABLE)
981   /* Re-enable MACE TX interrupts. */
982   lp->tx_irq_disabled=0;
983   outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
984 #endif /* #if (!TX_INTERRUPTABLE) */
985
986   dev_kfree_skb(skb);
987
988   return 0;
989 } /* mace_start_xmit */
990
991 /* ----------------------------------------------------------------------------
992 mace_interrupt
993         The interrupt handler.
994 ---------------------------------------------------------------------------- */
995 static irqreturn_t mace_interrupt(int irq, void *dev_id)
996 {
997   struct net_device *dev = (struct net_device *) dev_id;
998   mace_private *lp = netdev_priv(dev);
999   unsigned int ioaddr;
1000   int status;
1001   int IntrCnt = MACE_MAX_IR_ITERATIONS;
1002
1003   if (dev == NULL) {
1004     DEBUG(2, "mace_interrupt(): irq 0x%X for unknown device.\n",
1005           irq);
1006     return IRQ_NONE;
1007   }
1008
1009   ioaddr = dev->base_addr;
1010
1011   if (lp->tx_irq_disabled) {
1012     printk(
1013       (lp->tx_irq_disabled?
1014        KERN_NOTICE "%s: Interrupt with tx_irq_disabled "
1015        "[isr=%02X, imr=%02X]\n": 
1016        KERN_NOTICE "%s: Re-entering the interrupt handler "
1017        "[isr=%02X, imr=%02X]\n"),
1018       dev->name,
1019       inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
1020       inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)
1021     );
1022     /* WARNING: MACE_IR has been read! */
1023     return IRQ_NONE;
1024   }
1025
1026   if (!netif_device_present(dev)) {
1027     DEBUG(2, "%s: interrupt from dead card\n", dev->name);
1028     return IRQ_NONE;
1029   }
1030
1031   do {
1032     /* WARNING: MACE_IR is a READ/CLEAR port! */
1033     status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
1034
1035     DEBUG(3, "mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
1036
1037     if (status & MACE_IR_RCVINT) {
1038       mace_rx(dev, MACE_MAX_RX_ITERATIONS);
1039     }
1040
1041     if (status & MACE_IR_XMTINT) {
1042       unsigned char fifofc;
1043       unsigned char xmtrc;
1044       unsigned char xmtfs;
1045
1046       fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
1047       if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
1048         lp->linux_stats.tx_errors++;
1049         outb(0xFF, ioaddr + AM2150_XMT_SKIP);
1050       }
1051
1052       /* Transmit Retry Count (XMTRC, reg 4) */
1053       xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
1054       if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
1055       lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
1056
1057       if (
1058         (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
1059         MACE_XMTFS_XMTSV /* Transmit Status Valid */
1060       ) {
1061         lp->mace_stats.xmtsv++;
1062
1063         if (xmtfs & ~MACE_XMTFS_XMTSV) {
1064           if (xmtfs & MACE_XMTFS_UFLO) {
1065             /* Underflow.  Indicates that the Transmit FIFO emptied before
1066                the end of frame was reached. */
1067             lp->mace_stats.uflo++;
1068           }
1069           if (xmtfs & MACE_XMTFS_LCOL) {
1070             /* Late Collision */
1071             lp->mace_stats.lcol++;
1072           }
1073           if (xmtfs & MACE_XMTFS_MORE) {
1074             /* MORE than one retry was needed */
1075             lp->mace_stats.more++;
1076           }
1077           if (xmtfs & MACE_XMTFS_ONE) {
1078             /* Exactly ONE retry occurred */
1079             lp->mace_stats.one++;
1080           }
1081           if (xmtfs & MACE_XMTFS_DEFER) {
1082             /* Transmission was defered */
1083             lp->mace_stats.defer++;
1084           }
1085           if (xmtfs & MACE_XMTFS_LCAR) {
1086             /* Loss of carrier */
1087             lp->mace_stats.lcar++;
1088           }
1089           if (xmtfs & MACE_XMTFS_RTRY) {
1090             /* Retry error: transmit aborted after 16 attempts */
1091             lp->mace_stats.rtry++;
1092           }
1093         } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1094
1095       } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1096
1097       lp->linux_stats.tx_packets++;
1098       lp->tx_free_frames++;
1099       netif_wake_queue(dev);
1100     } /* if (status & MACE_IR_XMTINT) */
1101
1102     if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
1103       if (status & MACE_IR_JAB) {
1104         /* Jabber Error.  Excessive transmit duration (20-150ms). */
1105         lp->mace_stats.jab++;
1106       }
1107       if (status & MACE_IR_BABL) {
1108         /* Babble Error.  >1518 bytes transmitted. */
1109         lp->mace_stats.babl++;
1110       }
1111       if (status & MACE_IR_CERR) {
1112         /* Collision Error.  CERR indicates the absence of the
1113            Signal Quality Error Test message after a packet
1114            transmission. */
1115         lp->mace_stats.cerr++;
1116       }
1117       if (status & MACE_IR_RCVCCO) {
1118         /* Receive Collision Count Overflow; */
1119         lp->mace_stats.rcvcco++;
1120       }
1121       if (status & MACE_IR_RNTPCO) {
1122         /* Runt Packet Count Overflow */
1123         lp->mace_stats.rntpco++;
1124       }
1125       if (status & MACE_IR_MPCO) {
1126         /* Missed Packet Count Overflow */
1127         lp->mace_stats.mpco++;
1128       }
1129     } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1130
1131   } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
1132
1133   return IRQ_HANDLED;
1134 } /* mace_interrupt */
1135
1136 /* ----------------------------------------------------------------------------
1137 mace_rx
1138         Receives packets.
1139 ---------------------------------------------------------------------------- */
1140 static int mace_rx(struct net_device *dev, unsigned char RxCnt)
1141 {
1142   mace_private *lp = netdev_priv(dev);
1143   unsigned int ioaddr = dev->base_addr;
1144   unsigned char rx_framecnt;
1145   unsigned short rx_status;
1146
1147   while (
1148     ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
1149     (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
1150     (RxCnt--)
1151   ) {
1152     rx_status = inw(ioaddr + AM2150_RCV);
1153
1154     DEBUG(3, "%s: in mace_rx(), framecnt 0x%X, rx_status"
1155           " 0x%X.\n", dev->name, rx_framecnt, rx_status);
1156
1157     if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
1158       lp->linux_stats.rx_errors++;
1159       if (rx_status & MACE_RCVFS_OFLO) {
1160         lp->mace_stats.oflo++;
1161       }
1162       if (rx_status & MACE_RCVFS_CLSN) {
1163         lp->mace_stats.clsn++;
1164       }
1165       if (rx_status & MACE_RCVFS_FRAM) {
1166         lp->mace_stats.fram++;
1167       }
1168       if (rx_status & MACE_RCVFS_FCS) {
1169         lp->mace_stats.fcs++;
1170       }
1171     } else {
1172       short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
1173         /* Auto Strip is off, always subtract 4 */
1174       struct sk_buff *skb;
1175
1176       lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
1177         /* runt packet count */
1178       lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
1179         /* rcv collision count */
1180
1181       DEBUG(3, "    receiving packet size 0x%X rx_status"
1182             " 0x%X.\n", pkt_len, rx_status);
1183
1184       skb = dev_alloc_skb(pkt_len+2);
1185
1186       if (skb != NULL) {
1187         skb_reserve(skb, 2);
1188         insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
1189         if (pkt_len & 1)
1190             *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV);
1191         skb->protocol = eth_type_trans(skb, dev);
1192         
1193         netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
1194
1195         lp->linux_stats.rx_packets++;
1196         lp->linux_stats.rx_bytes += pkt_len;
1197         outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1198         continue;
1199       } else {
1200         DEBUG(1, "%s: couldn't allocate a sk_buff of size"
1201               " %d.\n", dev->name, pkt_len);
1202         lp->linux_stats.rx_dropped++;
1203       }
1204     }
1205     outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1206   } /* while */
1207
1208   return 0;
1209 } /* mace_rx */
1210
1211 /* ----------------------------------------------------------------------------
1212 pr_linux_stats
1213 ---------------------------------------------------------------------------- */
1214 static void pr_linux_stats(struct net_device_stats *pstats)
1215 {
1216   DEBUG(2, "pr_linux_stats\n");
1217   DEBUG(2, " rx_packets=%-7ld        tx_packets=%ld\n",
1218         (long)pstats->rx_packets, (long)pstats->tx_packets);
1219   DEBUG(2, " rx_errors=%-7ld         tx_errors=%ld\n",
1220         (long)pstats->rx_errors, (long)pstats->tx_errors);
1221   DEBUG(2, " rx_dropped=%-7ld        tx_dropped=%ld\n",
1222         (long)pstats->rx_dropped, (long)pstats->tx_dropped);
1223   DEBUG(2, " multicast=%-7ld         collisions=%ld\n",
1224         (long)pstats->multicast, (long)pstats->collisions);
1225
1226   DEBUG(2, " rx_length_errors=%-7ld  rx_over_errors=%ld\n",
1227         (long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
1228   DEBUG(2, " rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
1229         (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
1230   DEBUG(2, " rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
1231         (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
1232
1233   DEBUG(2, " tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1234         (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
1235   DEBUG(2, " tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
1236         (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
1237   DEBUG(2, " tx_window_errors=%ld\n",
1238         (long)pstats->tx_window_errors);
1239 } /* pr_linux_stats */
1240
1241 /* ----------------------------------------------------------------------------
1242 pr_mace_stats
1243 ---------------------------------------------------------------------------- */
1244 static void pr_mace_stats(mace_statistics *pstats)
1245 {
1246   DEBUG(2, "pr_mace_stats\n");
1247
1248   DEBUG(2, " xmtsv=%-7d             uflo=%d\n",
1249         pstats->xmtsv, pstats->uflo);
1250   DEBUG(2, " lcol=%-7d              more=%d\n",
1251         pstats->lcol, pstats->more);
1252   DEBUG(2, " one=%-7d               defer=%d\n",
1253         pstats->one, pstats->defer);
1254   DEBUG(2, " lcar=%-7d              rtry=%d\n",
1255         pstats->lcar, pstats->rtry);
1256
1257   /* MACE_XMTRC */
1258   DEBUG(2, " exdef=%-7d             xmtrc=%d\n",
1259         pstats->exdef, pstats->xmtrc);
1260
1261   /* RFS1--Receive Status (RCVSTS) */
1262   DEBUG(2, " oflo=%-7d              clsn=%d\n",
1263         pstats->oflo, pstats->clsn);
1264   DEBUG(2, " fram=%-7d              fcs=%d\n",
1265         pstats->fram, pstats->fcs);
1266
1267   /* RFS2--Runt Packet Count (RNTPC) */
1268   /* RFS3--Receive Collision Count (RCVCC) */
1269   DEBUG(2, " rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
1270         pstats->rfs_rntpc, pstats->rfs_rcvcc);
1271
1272   /* MACE_IR */
1273   DEBUG(2, " jab=%-7d               babl=%d\n",
1274         pstats->jab, pstats->babl);
1275   DEBUG(2, " cerr=%-7d              rcvcco=%d\n",
1276         pstats->cerr, pstats->rcvcco);
1277   DEBUG(2, " rntpco=%-7d            mpco=%d\n",
1278         pstats->rntpco, pstats->mpco);
1279
1280   /* MACE_MPC */
1281   DEBUG(2, " mpc=%d\n", pstats->mpc);
1282
1283   /* MACE_RNTPC */
1284   DEBUG(2, " rntpc=%d\n", pstats->rntpc);
1285
1286   /* MACE_RCVCC */
1287   DEBUG(2, " rcvcc=%d\n", pstats->rcvcc);
1288
1289 } /* pr_mace_stats */
1290
1291 /* ----------------------------------------------------------------------------
1292 update_stats
1293         Update statistics.  We change to register window 1, so this
1294         should be run single-threaded if the device is active. This is
1295         expected to be a rare operation, and it's simpler for the rest
1296         of the driver to assume that window 0 is always valid rather
1297         than use a special window-state variable.
1298
1299         oflo & uflo should _never_ occur since it would mean the Xilinx
1300         was not able to transfer data between the MACE FIFO and the
1301         card's SRAM fast enough.  If this happens, something is
1302         seriously wrong with the hardware.
1303 ---------------------------------------------------------------------------- */
1304 static void update_stats(unsigned int ioaddr, struct net_device *dev)
1305 {
1306   mace_private *lp = netdev_priv(dev);
1307
1308   lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
1309   lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
1310   lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
1311   /* At this point, mace_stats is fully updated for this call.
1312      We may now update the linux_stats. */
1313
1314   /* The MACE has no equivalent for linux_stats field which are commented
1315      out. */
1316
1317   /* lp->linux_stats.multicast; */
1318   lp->linux_stats.collisions = 
1319     lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
1320     /* Collision: The MACE may retry sending a packet 15 times
1321        before giving up.  The retry count is in XMTRC.
1322        Does each retry constitute a collision?
1323        If so, why doesn't the RCVCC record these collisions? */
1324
1325   /* detailed rx_errors: */
1326   lp->linux_stats.rx_length_errors = 
1327     lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
1328   /* lp->linux_stats.rx_over_errors */
1329   lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs;
1330   lp->linux_stats.rx_frame_errors = lp->mace_stats.fram;
1331   lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo;
1332   lp->linux_stats.rx_missed_errors = 
1333     lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
1334
1335   /* detailed tx_errors */
1336   lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry;
1337   lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar;
1338     /* LCAR usually results from bad cabling. */
1339   lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo;
1340   lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr;
1341   /* lp->linux_stats.tx_window_errors; */
1342
1343   return;
1344 } /* update_stats */
1345
1346 /* ----------------------------------------------------------------------------
1347 mace_get_stats
1348         Gathers ethernet statistics from the MACE chip.
1349 ---------------------------------------------------------------------------- */
1350 static struct net_device_stats *mace_get_stats(struct net_device *dev)
1351 {
1352   mace_private *lp = netdev_priv(dev);
1353
1354   update_stats(dev->base_addr, dev);
1355
1356   DEBUG(1, "%s: updating the statistics.\n", dev->name);
1357   pr_linux_stats(&lp->linux_stats);
1358   pr_mace_stats(&lp->mace_stats);
1359
1360   return &lp->linux_stats;
1361 } /* net_device_stats */
1362
1363 /* ----------------------------------------------------------------------------
1364 updateCRC
1365         Modified from Am79C90 data sheet.
1366 ---------------------------------------------------------------------------- */
1367
1368 #ifdef BROKEN_MULTICAST
1369
1370 static void updateCRC(int *CRC, int bit)
1371 {
1372   int poly[]={
1373     1,1,1,0, 1,1,0,1,
1374     1,0,1,1, 1,0,0,0,
1375     1,0,0,0, 0,0,1,1,
1376     0,0,1,0, 0,0,0,0
1377   }; /* CRC polynomial.  poly[n] = coefficient of the x**n term of the
1378         CRC generator polynomial. */
1379
1380   int j;
1381
1382   /* shift CRC and control bit (CRC[32]) */
1383   for (j = 32; j > 0; j--)
1384     CRC[j] = CRC[j-1];
1385   CRC[0] = 0;
1386
1387   /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1388   if (bit ^ CRC[32])
1389     for (j = 0; j < 32; j++)
1390       CRC[j] ^= poly[j];
1391 } /* updateCRC */
1392
1393 /* ----------------------------------------------------------------------------
1394 BuildLAF
1395         Build logical address filter.
1396         Modified from Am79C90 data sheet.
1397
1398 Input
1399         ladrf: logical address filter (contents initialized to 0)
1400         adr: ethernet address
1401 ---------------------------------------------------------------------------- */
1402 static void BuildLAF(int *ladrf, int *adr)
1403 {
1404   int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1405
1406   int i, byte; /* temporary array indices */
1407   int hashcode; /* the output object */
1408
1409   CRC[32]=0;
1410
1411   for (byte = 0; byte < 6; byte++)
1412     for (i = 0; i < 8; i++)
1413       updateCRC(CRC, (adr[byte] >> i) & 1);
1414
1415   hashcode = 0;
1416   for (i = 0; i < 6; i++)
1417     hashcode = (hashcode << 1) + CRC[i];
1418
1419   byte = hashcode >> 3;
1420   ladrf[byte] |= (1 << (hashcode & 7));
1421
1422 #ifdef PCMCIA_DEBUG
1423   if (pc_debug > 2) {
1424     printk(KERN_DEBUG "    adr =");
1425     for (i = 0; i < 6; i++)
1426       printk(" %02X", adr[i]);
1427     printk("\n" KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63]"
1428            " =", hashcode);
1429     for (i = 0; i < 8; i++)
1430       printk(" %02X", ladrf[i]);
1431     printk("\n");
1432   }
1433 #endif
1434 } /* BuildLAF */
1435
1436 /* ----------------------------------------------------------------------------
1437 restore_multicast_list
1438         Restores the multicast filter for MACE chip to the last
1439         set_multicast_list() call.
1440
1441 Input
1442         multicast_num_addrs
1443         multicast_ladrf[]
1444 ---------------------------------------------------------------------------- */
1445 static void restore_multicast_list(struct net_device *dev)
1446 {
1447   mace_private *lp = netdev_priv(dev);
1448   int num_addrs = lp->multicast_num_addrs;
1449   int *ladrf = lp->multicast_ladrf;
1450   unsigned int ioaddr = dev->base_addr;
1451   int i;
1452
1453   DEBUG(2, "%s: restoring Rx mode to %d addresses.\n",
1454         dev->name, num_addrs);
1455
1456   if (num_addrs > 0) {
1457
1458     DEBUG(1, "Attempt to restore multicast list detected.\n");
1459
1460     mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
1461     /* Poll ADDRCHG bit */
1462     while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
1463       ;
1464     /* Set LADRF register */
1465     for (i = 0; i < MACE_LADRF_LEN; i++)
1466       mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
1467
1468     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
1469     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1470
1471   } else if (num_addrs < 0) {
1472
1473     /* Promiscuous mode: receive all packets */
1474     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1475     mace_write(lp, ioaddr, MACE_MACCC,
1476       MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1477     );
1478
1479   } else {
1480
1481     /* Normal mode */
1482     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1483     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1484
1485   }
1486 } /* restore_multicast_list */
1487
1488 /* ----------------------------------------------------------------------------
1489 set_multicast_list
1490         Set or clear the multicast filter for this adaptor.
1491
1492 Input
1493         num_addrs == -1 Promiscuous mode, receive all packets
1494         num_addrs == 0  Normal mode, clear multicast list
1495         num_addrs > 0   Multicast mode, receive normal and MC packets, and do
1496                         best-effort filtering.
1497 Output
1498         multicast_num_addrs
1499         multicast_ladrf[]
1500 ---------------------------------------------------------------------------- */
1501
1502 static void set_multicast_list(struct net_device *dev)
1503 {
1504   mace_private *lp = netdev_priv(dev);
1505   int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */
1506   int i;
1507   struct dev_mc_list *dmi = dev->mc_list;
1508
1509 #ifdef PCMCIA_DEBUG
1510   if (pc_debug > 1) {
1511     static int old;
1512     if (dev->mc_count != old) {
1513       old = dev->mc_count;
1514       DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
1515             dev->name, old);
1516     }
1517   }
1518 #endif
1519
1520   /* Set multicast_num_addrs. */
1521   lp->multicast_num_addrs = dev->mc_count;
1522
1523   /* Set multicast_ladrf. */
1524   if (num_addrs > 0) {
1525     /* Calculate multicast logical address filter */
1526     memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
1527     for (i = 0; i < dev->mc_count; i++) {
1528       memcpy(adr, dmi->dmi_addr, ETHER_ADDR_LEN);
1529       dmi = dmi->next;
1530       BuildLAF(lp->multicast_ladrf, adr);
1531     }
1532   }
1533
1534   restore_multicast_list(dev);
1535
1536 } /* set_multicast_list */
1537
1538 #endif /* BROKEN_MULTICAST */
1539
1540 static void restore_multicast_list(struct net_device *dev)
1541 {
1542   unsigned int ioaddr = dev->base_addr;
1543   mace_private *lp = netdev_priv(dev);
1544
1545   DEBUG(2, "%s: restoring Rx mode to %d addresses.\n", dev->name,
1546         lp->multicast_num_addrs);
1547
1548   if (dev->flags & IFF_PROMISC) {
1549     /* Promiscuous mode: receive all packets */
1550     mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1551     mace_write(lp, ioaddr, MACE_MACCC,
1552       MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1553     );
1554   } else {
1555     /* Normal mode */
1556     mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1557     mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1558   }
1559 } /* restore_multicast_list */
1560
1561 static void set_multicast_list(struct net_device *dev)
1562 {
1563   mace_private *lp = netdev_priv(dev);
1564
1565 #ifdef PCMCIA_DEBUG
1566   if (pc_debug > 1) {
1567     static int old;
1568     if (dev->mc_count != old) {
1569       old = dev->mc_count;
1570       DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
1571             dev->name, old);
1572     }
1573   }
1574 #endif
1575
1576   lp->multicast_num_addrs = dev->mc_count;
1577   restore_multicast_list(dev);
1578
1579 } /* set_multicast_list */
1580
1581 static struct pcmcia_device_id nmclan_ids[] = {
1582         PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1583         PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1584         PCMCIA_DEVICE_NULL,
1585 };
1586 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
1587
1588 static struct pcmcia_driver nmclan_cs_driver = {
1589         .owner          = THIS_MODULE,
1590         .drv            = {
1591                 .name   = "nmclan_cs",
1592         },
1593         .probe          = nmclan_probe,
1594         .remove         = nmclan_detach,
1595         .id_table       = nmclan_ids,
1596         .suspend        = nmclan_suspend,
1597         .resume         = nmclan_resume,
1598 };
1599
1600 static int __init init_nmclan_cs(void)
1601 {
1602         return pcmcia_register_driver(&nmclan_cs_driver);
1603 }
1604
1605 static void __exit exit_nmclan_cs(void)
1606 {
1607         pcmcia_unregister_driver(&nmclan_cs_driver);
1608 }
1609
1610 module_init(init_nmclan_cs);
1611 module_exit(exit_nmclan_cs);