[PATCH] smsc-ircc2: PM cleanup - do not close device when suspending
[linux-2.6.git] / drivers / net / irda / smsc-ircc2.c
1 /*********************************************************************
2  * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $
3  *
4  * Description:   Driver for the SMC Infrared Communications Controller
5  * Status:        Experimental.
6  * Author:        Daniele Peri (peri@csai.unipa.it)
7  * Created at:
8  * Modified at:
9  * Modified by:
10  *
11  *     Copyright (c) 2002      Daniele Peri
12  *     All Rights Reserved.
13  *     Copyright (c) 2002      Jean Tourrilhes
14  *
15  *
16  * Based on smc-ircc.c:
17  *
18  *     Copyright (c) 2001      Stefani Seibold
19  *     Copyright (c) 1999-2001 Dag Brattli
20  *     Copyright (c) 1998-1999 Thomas Davis,
21  *
22  *      and irport.c:
23  *
24  *     Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved.
25  *
26  *
27  *     This program is free software; you can redistribute it and/or
28  *     modify it under the terms of the GNU General Public License as
29  *     published by the Free Software Foundation; either version 2 of
30  *     the License, or (at your option) any later version.
31  *
32  *     This program is distributed in the hope that it will be useful,
33  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
34  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
35  *     GNU General Public License for more details.
36  *
37  *     You should have received a copy of the GNU General Public License
38  *     along with this program; if not, write to the Free Software
39  *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
40  *     MA 02111-1307 USA
41  *
42  ********************************************************************/
43
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/types.h>
47 #include <linux/skbuff.h>
48 #include <linux/netdevice.h>
49 #include <linux/ioport.h>
50 #include <linux/delay.h>
51 #include <linux/slab.h>
52 #include <linux/init.h>
53 #include <linux/rtnetlink.h>
54 #include <linux/serial_reg.h>
55 #include <linux/dma-mapping.h>
56
57 #include <asm/io.h>
58 #include <asm/dma.h>
59 #include <asm/byteorder.h>
60
61 #include <linux/spinlock.h>
62 #include <linux/pm.h>
63
64 #include <net/irda/wrapper.h>
65 #include <net/irda/irda.h>
66 #include <net/irda/irda_device.h>
67
68 #include "smsc-ircc2.h"
69 #include "smsc-sio.h"
70
71
72 MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>");
73 MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver");
74 MODULE_LICENSE("GPL");
75
76 static int ircc_dma = 255;
77 module_param(ircc_dma, int, 0);
78 MODULE_PARM_DESC(ircc_dma, "DMA channel");
79
80 static int ircc_irq = 255;
81 module_param(ircc_irq, int, 0);
82 MODULE_PARM_DESC(ircc_irq, "IRQ line");
83
84 static int ircc_fir;
85 module_param(ircc_fir, int, 0);
86 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
87
88 static int ircc_sir;
89 module_param(ircc_sir, int, 0);
90 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
91
92 static int ircc_cfg;
93 module_param(ircc_cfg, int, 0);
94 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
95
96 static int ircc_transceiver;
97 module_param(ircc_transceiver, int, 0);
98 MODULE_PARM_DESC(ircc_transceiver, "Transceiver type");
99
100 /* Types */
101
102 struct smsc_transceiver {
103         char *name;
104         void (*set_for_speed)(int fir_base, u32 speed);
105         int  (*probe)(int fir_base);
106 };
107
108 struct smsc_chip {
109         char *name;
110         #if 0
111         u8      type;
112         #endif
113         u16 flags;
114         u8 devid;
115         u8 rev;
116 };
117
118 struct smsc_chip_address {
119         unsigned int cfg_base;
120         unsigned int type;
121 };
122
123 /* Private data for each instance */
124 struct smsc_ircc_cb {
125         struct net_device *netdev;     /* Yes! we are some kind of netdevice */
126         struct net_device_stats stats;
127         struct irlap_cb    *irlap; /* The link layer we are binded to */
128
129         chipio_t io;               /* IrDA controller information */
130         iobuff_t tx_buff;          /* Transmit buffer */
131         iobuff_t rx_buff;          /* Receive buffer */
132         dma_addr_t tx_buff_dma;
133         dma_addr_t rx_buff_dma;
134
135         struct qos_info qos;       /* QoS capabilities for this device */
136
137         spinlock_t lock;           /* For serializing operations */
138
139         __u32 new_speed;
140         __u32 flags;               /* Interface flags */
141
142         int tx_buff_offsets[10];   /* Offsets between frames in tx_buff */
143         int tx_len;                /* Number of frames in tx_buff */
144
145         int transceiver;
146         struct platform_device *pldev;
147 };
148
149 /* Constants */
150
151 #define SMSC_IRCC2_DRIVER_NAME                  "smsc-ircc2"
152
153 #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED        9600
154 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER        1
155 #define SMSC_IRCC2_C_NET_TIMEOUT                0
156 #define SMSC_IRCC2_C_SIR_STOP                   0
157
158 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME;
159
160 /* Prototypes */
161
162 static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq);
163 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base);
164 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq);
165 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self);
166 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self);
167 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self);
168 static int  smsc_ircc_dma_receive(struct smsc_ircc_cb *self);
169 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self);
170 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self);
171 static int  smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev);
172 static int  smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev);
173 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs);
174 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self);
175 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed);
176 static void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, u32 speed);
177 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
178 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev);
179 static void smsc_ircc_sir_start(struct smsc_ircc_cb *self);
180 #if SMSC_IRCC2_C_SIR_STOP
181 static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self);
182 #endif
183 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self);
184 static int  smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
185 static int  smsc_ircc_net_open(struct net_device *dev);
186 static int  smsc_ircc_net_close(struct net_device *dev);
187 static int  smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
188 #if SMSC_IRCC2_C_NET_TIMEOUT
189 static void smsc_ircc_timeout(struct net_device *dev);
190 #endif
191 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev);
192 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self);
193 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self);
194 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed);
195 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self);
196
197 /* Probing */
198 static int __init smsc_ircc_look_for_chips(void);
199 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type);
200 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
201 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type);
202 static int __init smsc_superio_fdc(unsigned short cfg_base);
203 static int __init smsc_superio_lpc(unsigned short cfg_base);
204
205 /* Transceivers specific functions */
206
207 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed);
208 static int  smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base);
209 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed);
210 static int  smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base);
211 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed);
212 static int  smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base);
213
214 /* Power Management */
215
216 static int smsc_ircc_suspend(struct device *dev, pm_message_t state);
217 static int smsc_ircc_resume(struct device *dev);
218
219 static struct device_driver smsc_ircc_driver = {
220         .name           = SMSC_IRCC2_DRIVER_NAME,
221         .bus            = &platform_bus_type,
222         .suspend        = smsc_ircc_suspend,
223         .resume         = smsc_ircc_resume,
224 };
225
226 /* Transceivers for SMSC-ircc */
227
228 static struct smsc_transceiver smsc_transceivers[] =
229 {
230         { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 },
231         { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select },
232         { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc },
233         { NULL, NULL }
234 };
235 #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1)
236
237 /*  SMC SuperIO chipsets definitions */
238
239 #define KEY55_1 0       /* SuperIO Configuration mode with Key <0x55> */
240 #define KEY55_2 1       /* SuperIO Configuration mode with Key <0x55,0x55> */
241 #define NoIRDA  2       /* SuperIO Chip has no IRDA Port */
242 #define SIR     0       /* SuperIO Chip has only slow IRDA */
243 #define FIR     4       /* SuperIO Chip has fast IRDA */
244 #define SERx4   8       /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */
245
246 static struct smsc_chip __initdata fdc_chips_flat[] =
247 {
248         /* Base address 0x3f0 or 0x370 */
249         { "37C44",      KEY55_1|NoIRDA,         0x00, 0x00 }, /* This chip cannot be detected */
250         { "37C665GT",   KEY55_2|NoIRDA,         0x65, 0x01 },
251         { "37C665GT",   KEY55_2|NoIRDA,         0x66, 0x01 },
252         { "37C669",     KEY55_2|SIR|SERx4,      0x03, 0x02 },
253         { "37C669",     KEY55_2|SIR|SERx4,      0x04, 0x02 }, /* ID? */
254         { "37C78",      KEY55_2|NoIRDA,         0x78, 0x00 },
255         { "37N769",     KEY55_1|FIR|SERx4,      0x28, 0x00 },
256         { "37N869",     KEY55_1|FIR|SERx4,      0x29, 0x00 },
257         { NULL }
258 };
259
260 static struct smsc_chip __initdata fdc_chips_paged[] =
261 {
262         /* Base address 0x3f0 or 0x370 */
263         { "37B72X",     KEY55_1|SIR|SERx4,      0x4c, 0x00 },
264         { "37B77X",     KEY55_1|SIR|SERx4,      0x43, 0x00 },
265         { "37B78X",     KEY55_1|SIR|SERx4,      0x44, 0x00 },
266         { "37B80X",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
267         { "37C67X",     KEY55_1|FIR|SERx4,      0x40, 0x00 },
268         { "37C93X",     KEY55_2|SIR|SERx4,      0x02, 0x01 },
269         { "37C93XAPM",  KEY55_1|SIR|SERx4,      0x30, 0x01 },
270         { "37C93XFR",   KEY55_2|FIR|SERx4,      0x03, 0x01 },
271         { "37M707",     KEY55_1|SIR|SERx4,      0x42, 0x00 },
272         { "37M81X",     KEY55_1|SIR|SERx4,      0x4d, 0x00 },
273         { "37N958FR",   KEY55_1|FIR|SERx4,      0x09, 0x04 },
274         { "37N971",     KEY55_1|FIR|SERx4,      0x0a, 0x00 },
275         { "37N972",     KEY55_1|FIR|SERx4,      0x0b, 0x00 },
276         { NULL }
277 };
278
279 static struct smsc_chip __initdata lpc_chips_flat[] =
280 {
281         /* Base address 0x2E or 0x4E */
282         { "47N227",     KEY55_1|FIR|SERx4,      0x5a, 0x00 },
283         { "47N267",     KEY55_1|FIR|SERx4,      0x5e, 0x00 },
284         { NULL }
285 };
286
287 static struct smsc_chip __initdata lpc_chips_paged[] =
288 {
289         /* Base address 0x2E or 0x4E */
290         { "47B27X",     KEY55_1|SIR|SERx4,      0x51, 0x00 },
291         { "47B37X",     KEY55_1|SIR|SERx4,      0x52, 0x00 },
292         { "47M10X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
293         { "47M120",     KEY55_1|NoIRDA|SERx4,   0x5c, 0x00 },
294         { "47M13X",     KEY55_1|SIR|SERx4,      0x59, 0x00 },
295         { "47M14X",     KEY55_1|SIR|SERx4,      0x5f, 0x00 },
296         { "47N252",     KEY55_1|FIR|SERx4,      0x0e, 0x00 },
297         { "47S42X",     KEY55_1|SIR|SERx4,      0x57, 0x00 },
298         { NULL }
299 };
300
301 #define SMSCSIO_TYPE_FDC        1
302 #define SMSCSIO_TYPE_LPC        2
303 #define SMSCSIO_TYPE_FLAT       4
304 #define SMSCSIO_TYPE_PAGED      8
305
306 static struct smsc_chip_address __initdata possible_addresses[] =
307 {
308         { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
309         { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
310         { 0xe0,  SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
311         { 0x2e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
312         { 0x4e,  SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED },
313         { 0, 0 }
314 };
315
316 /* Globals */
317
318 static struct smsc_ircc_cb *dev_self[] = { NULL, NULL };
319 static unsigned short dev_count;
320
321 static inline void register_bank(int iobase, int bank)
322 {
323         outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)),
324                iobase + IRCC_MASTER);
325 }
326
327
328 /*******************************************************************************
329  *
330  *
331  * SMSC-ircc stuff
332  *
333  *
334  *******************************************************************************/
335
336 /*
337  * Function smsc_ircc_init ()
338  *
339  *    Initialize chip. Just try to find out how many chips we are dealing with
340  *    and where they are
341  */
342 static int __init smsc_ircc_init(void)
343 {
344         int ret;
345
346         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
347
348         ret = driver_register(&smsc_ircc_driver);
349         if (ret) {
350                 IRDA_ERROR("%s, Can't register driver!\n", driver_name);
351                 return ret;
352         }
353
354         dev_count = 0;
355
356         if (ircc_fir > 0 && ircc_sir > 0) {
357                 IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir);
358                 IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir);
359
360                 if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq))
361                         ret = -ENODEV;
362         } else {
363                 ret = -ENODEV;
364
365                 /* try user provided configuration register base address */
366                 if (ircc_cfg > 0) {
367                         IRDA_MESSAGE(" Overriding configuration address "
368                                      "0x%04x\n", ircc_cfg);
369                         if (!smsc_superio_fdc(ircc_cfg))
370                                 ret = 0;
371                         if (!smsc_superio_lpc(ircc_cfg))
372                                 ret = 0;
373                 }
374
375                 if (smsc_ircc_look_for_chips() > 0)
376                         ret = 0;
377         }
378
379         if (ret)
380                 driver_unregister(&smsc_ircc_driver);
381
382         return ret;
383 }
384
385 /*
386  * Function smsc_ircc_open (firbase, sirbase, dma, irq)
387  *
388  *    Try to open driver instance
389  *
390  */
391 static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq)
392 {
393         struct smsc_ircc_cb *self;
394         struct net_device *dev;
395         int err;
396
397         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
398
399         err = smsc_ircc_present(fir_base, sir_base);
400         if (err)
401                 goto err_out;
402
403         err = -ENOMEM;
404         if (dev_count >= ARRAY_SIZE(dev_self)) {
405                 IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__);
406                 goto err_out1;
407         }
408
409         /*
410          *  Allocate new instance of the driver
411          */
412         dev = alloc_irdadev(sizeof(struct smsc_ircc_cb));
413         if (!dev) {
414                 IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__);
415                 goto err_out1;
416         }
417
418         SET_MODULE_OWNER(dev);
419
420         dev->hard_start_xmit = smsc_ircc_hard_xmit_sir;
421 #if SMSC_IRCC2_C_NET_TIMEOUT
422         dev->tx_timeout      = smsc_ircc_timeout;
423         dev->watchdog_timeo  = HZ * 2;  /* Allow enough time for speed change */
424 #endif
425         dev->open            = smsc_ircc_net_open;
426         dev->stop            = smsc_ircc_net_close;
427         dev->do_ioctl        = smsc_ircc_net_ioctl;
428         dev->get_stats       = smsc_ircc_net_get_stats;
429
430         self = netdev_priv(dev);
431         self->netdev = dev;
432
433         /* Make ifconfig display some details */
434         dev->base_addr = self->io.fir_base = fir_base;
435         dev->irq = self->io.irq = irq;
436
437         /* Need to store self somewhere */
438         dev_self[dev_count] = self;
439         spin_lock_init(&self->lock);
440
441         self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE;
442         self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE;
443
444         self->rx_buff.head =
445                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
446                                    &self->rx_buff_dma, GFP_KERNEL);
447         if (self->rx_buff.head == NULL) {
448                 IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n",
449                            driver_name);
450                 goto err_out2;
451         }
452
453         self->tx_buff.head =
454                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
455                                    &self->tx_buff_dma, GFP_KERNEL);
456         if (self->tx_buff.head == NULL) {
457                 IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n",
458                            driver_name);
459                 goto err_out3;
460         }
461
462         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
463         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
464
465         self->rx_buff.in_frame = FALSE;
466         self->rx_buff.state = OUTSIDE_FRAME;
467         self->tx_buff.data = self->tx_buff.head;
468         self->rx_buff.data = self->rx_buff.head;
469
470         smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq);
471         smsc_ircc_setup_qos(self);
472         smsc_ircc_init_chip(self);
473
474         if (ircc_transceiver > 0  &&
475             ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS)
476                 self->transceiver = ircc_transceiver;
477         else
478                 smsc_ircc_probe_transceiver(self);
479
480         err = register_netdev(self->netdev);
481         if (err) {
482                 IRDA_ERROR("%s, Network device registration failed!\n",
483                            driver_name);
484                 goto err_out4;
485         }
486
487         self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME,
488                                                       dev_count, NULL, 0);
489         if (IS_ERR(self->pldev)) {
490                 err = PTR_ERR(self->pldev);
491                 goto err_out5;
492         }
493         dev_set_drvdata(&self->pldev->dev, self);
494
495         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
496         dev_count++;
497
498         return 0;
499
500  err_out5:
501         unregister_netdev(self->netdev);
502
503  err_out4:
504         dma_free_coherent(NULL, self->tx_buff.truesize,
505                           self->tx_buff.head, self->tx_buff_dma);
506  err_out3:
507         dma_free_coherent(NULL, self->rx_buff.truesize,
508                           self->rx_buff.head, self->rx_buff_dma);
509  err_out2:
510         free_netdev(self->netdev);
511         dev_self[dev_count] = NULL;
512  err_out1:
513         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
514         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
515  err_out:
516         return err;
517 }
518
519 /*
520  * Function smsc_ircc_present(fir_base, sir_base)
521  *
522  *    Check the smsc-ircc chip presence
523  *
524  */
525 static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base)
526 {
527         unsigned char low, high, chip, config, dma, irq, version;
528
529         if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT,
530                             driver_name)) {
531                 IRDA_WARNING("%s: can't get fir_base of 0x%03x\n",
532                              __FUNCTION__, fir_base);
533                 goto out1;
534         }
535
536         if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT,
537                             driver_name)) {
538                 IRDA_WARNING("%s: can't get sir_base of 0x%03x\n",
539                              __FUNCTION__, sir_base);
540                 goto out2;
541         }
542
543         register_bank(fir_base, 3);
544
545         high    = inb(fir_base + IRCC_ID_HIGH);
546         low     = inb(fir_base + IRCC_ID_LOW);
547         chip    = inb(fir_base + IRCC_CHIP_ID);
548         version = inb(fir_base + IRCC_VERSION);
549         config  = inb(fir_base + IRCC_INTERFACE);
550         dma     = config & IRCC_INTERFACE_DMA_MASK;
551         irq     = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
552
553         if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) {
554                 IRDA_WARNING("%s(), addr 0x%04x - no device found!\n",
555                              __FUNCTION__, fir_base);
556                 goto out3;
557         }
558         IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, "
559                      "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n",
560                      chip & 0x0f, version, fir_base, sir_base, dma, irq);
561
562         return 0;
563
564  out3:
565         release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT);
566  out2:
567         release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT);
568  out1:
569         return -ENODEV;
570 }
571
572 /*
573  * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq)
574  *
575  *    Setup I/O
576  *
577  */
578 static void smsc_ircc_setup_io(struct smsc_ircc_cb *self,
579                                unsigned int fir_base, unsigned int sir_base,
580                                u8 dma, u8 irq)
581 {
582         unsigned char config, chip_dma, chip_irq;
583
584         register_bank(fir_base, 3);
585         config = inb(fir_base + IRCC_INTERFACE);
586         chip_dma = config & IRCC_INTERFACE_DMA_MASK;
587         chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4;
588
589         self->io.fir_base  = fir_base;
590         self->io.sir_base  = sir_base;
591         self->io.fir_ext   = SMSC_IRCC2_FIR_CHIP_IO_EXTENT;
592         self->io.sir_ext   = SMSC_IRCC2_SIR_CHIP_IO_EXTENT;
593         self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE;
594         self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED;
595
596         if (irq < 255) {
597                 if (irq != chip_irq)
598                         IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n",
599                                      driver_name, chip_irq, irq);
600                 self->io.irq = irq;
601         } else
602                 self->io.irq = chip_irq;
603
604         if (dma < 255) {
605                 if (dma != chip_dma)
606                         IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n",
607                                      driver_name, chip_dma, dma);
608                 self->io.dma = dma;
609         } else
610                 self->io.dma = chip_dma;
611
612 }
613
614 /*
615  * Function smsc_ircc_setup_qos(self)
616  *
617  *    Setup qos
618  *
619  */
620 static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self)
621 {
622         /* Initialize QoS for this device */
623         irda_init_max_qos_capabilies(&self->qos);
624
625         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
626                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
627
628         self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME;
629         self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE;
630         irda_qos_bits_to_value(&self->qos);
631 }
632
633 /*
634  * Function smsc_ircc_init_chip(self)
635  *
636  *    Init chip
637  *
638  */
639 static void smsc_ircc_init_chip(struct smsc_ircc_cb *self)
640 {
641         int iobase = self->io.fir_base;
642
643         register_bank(iobase, 0);
644         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
645         outb(0x00, iobase + IRCC_MASTER);
646
647         register_bank(iobase, 1);
648         outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | IRCC_CFGA_IRDA_SIR_A),
649              iobase + IRCC_SCE_CFGA);
650
651 #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */
652         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
653              iobase + IRCC_SCE_CFGB);
654 #else
655         outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
656              iobase + IRCC_SCE_CFGB);
657 #endif
658         (void) inb(iobase + IRCC_FIFO_THRESHOLD);
659         outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD);
660
661         register_bank(iobase, 4);
662         outb((inb(iobase + IRCC_CONTROL) & 0x30), iobase + IRCC_CONTROL);
663
664         register_bank(iobase, 0);
665         outb(0, iobase + IRCC_LCR_A);
666
667         smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
668
669         /* Power on device */
670         outb(0x00, iobase + IRCC_MASTER);
671 }
672
673 /*
674  * Function smsc_ircc_net_ioctl (dev, rq, cmd)
675  *
676  *    Process IOCTL commands for this device
677  *
678  */
679 static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
680 {
681         struct if_irda_req *irq = (struct if_irda_req *) rq;
682         struct smsc_ircc_cb *self;
683         unsigned long flags;
684         int ret = 0;
685
686         IRDA_ASSERT(dev != NULL, return -1;);
687
688         self = netdev_priv(dev);
689
690         IRDA_ASSERT(self != NULL, return -1;);
691
692         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
693
694         switch (cmd) {
695         case SIOCSBANDWIDTH: /* Set bandwidth */
696                 if (!capable(CAP_NET_ADMIN))
697                         ret = -EPERM;
698                 else {
699                         /* Make sure we are the only one touching
700                          * self->io.speed and the hardware - Jean II */
701                         spin_lock_irqsave(&self->lock, flags);
702                         smsc_ircc_change_speed(self, irq->ifr_baudrate);
703                         spin_unlock_irqrestore(&self->lock, flags);
704                 }
705                 break;
706         case SIOCSMEDIABUSY: /* Set media busy */
707                 if (!capable(CAP_NET_ADMIN)) {
708                         ret = -EPERM;
709                         break;
710                 }
711
712                 irda_device_set_media_busy(self->netdev, TRUE);
713                 break;
714         case SIOCGRECEIVING: /* Check if we are receiving right now */
715                 irq->ifr_receiving = smsc_ircc_is_receiving(self);
716                 break;
717         #if 0
718         case SIOCSDTRRTS:
719                 if (!capable(CAP_NET_ADMIN)) {
720                         ret = -EPERM;
721                         break;
722                 }
723                 smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts);
724                 break;
725         #endif
726         default:
727                 ret = -EOPNOTSUPP;
728         }
729
730         return ret;
731 }
732
733 static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev)
734 {
735         struct smsc_ircc_cb *self = netdev_priv(dev);
736
737         return &self->stats;
738 }
739
740 #if SMSC_IRCC2_C_NET_TIMEOUT
741 /*
742  * Function smsc_ircc_timeout (struct net_device *dev)
743  *
744  *    The networking timeout management.
745  *
746  */
747
748 static void smsc_ircc_timeout(struct net_device *dev)
749 {
750         struct smsc_ircc_cb *self = netdev_priv(dev);
751         unsigned long flags;
752
753         IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n",
754                      dev->name, self->io.speed);
755         spin_lock_irqsave(&self->lock, flags);
756         smsc_ircc_sir_start(self);
757         smsc_ircc_change_speed(self, self->io.speed);
758         dev->trans_start = jiffies;
759         netif_wake_queue(dev);
760         spin_unlock_irqrestore(&self->lock, flags);
761 }
762 #endif
763
764 /*
765  * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev)
766  *
767  *    Transmits the current frame until FIFO is full, then
768  *    waits until the next transmit interrupt, and continues until the
769  *    frame is transmitted.
770  */
771 int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev)
772 {
773         struct smsc_ircc_cb *self;
774         unsigned long flags;
775         s32 speed;
776
777         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
778
779         IRDA_ASSERT(dev != NULL, return 0;);
780
781         self = netdev_priv(dev);
782         IRDA_ASSERT(self != NULL, return 0;);
783
784         netif_stop_queue(dev);
785
786         /* Make sure test of self->io.speed & speed change are atomic */
787         spin_lock_irqsave(&self->lock, flags);
788
789         /* Check if we need to change the speed */
790         speed = irda_get_next_speed(skb);
791         if (speed != self->io.speed && speed != -1) {
792                 /* Check for empty frame */
793                 if (!skb->len) {
794                         /*
795                          * We send frames one by one in SIR mode (no
796                          * pipelining), so at this point, if we were sending
797                          * a previous frame, we just received the interrupt
798                          * telling us it is finished (UART_IIR_THRI).
799                          * Therefore, waiting for the transmitter to really
800                          * finish draining the fifo won't take too long.
801                          * And the interrupt handler is not expected to run.
802                          * - Jean II */
803                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
804                         smsc_ircc_change_speed(self, speed);
805                         spin_unlock_irqrestore(&self->lock, flags);
806                         dev_kfree_skb(skb);
807                         return 0;
808                 }
809                 self->new_speed = speed;
810         }
811
812         /* Init tx buffer */
813         self->tx_buff.data = self->tx_buff.head;
814
815         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
816         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
817                                            self->tx_buff.truesize);
818
819         self->stats.tx_bytes += self->tx_buff.len;
820
821         /* Turn on transmit finished interrupt. Will fire immediately!  */
822         outb(UART_IER_THRI, self->io.sir_base + UART_IER);
823
824         spin_unlock_irqrestore(&self->lock, flags);
825
826         dev_kfree_skb(skb);
827
828         return 0;
829 }
830
831 /*
832  * Function smsc_ircc_set_fir_speed (self, baud)
833  *
834  *    Change the speed of the device
835  *
836  */
837 static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed)
838 {
839         int fir_base, ir_mode, ctrl, fast;
840
841         IRDA_ASSERT(self != NULL, return;);
842         fir_base = self->io.fir_base;
843
844         self->io.speed = speed;
845
846         switch (speed) {
847         default:
848         case 576000:
849                 ir_mode = IRCC_CFGA_IRDA_HDLC;
850                 ctrl = IRCC_CRC;
851                 fast = 0;
852                 IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__);
853                 break;
854         case 1152000:
855                 ir_mode = IRCC_CFGA_IRDA_HDLC;
856                 ctrl = IRCC_1152 | IRCC_CRC;
857                 fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
858                 IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
859                            __FUNCTION__);
860                 break;
861         case 4000000:
862                 ir_mode = IRCC_CFGA_IRDA_4PPM;
863                 ctrl = IRCC_CRC;
864                 fast = IRCC_LCR_A_FAST;
865                 IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
866                            __FUNCTION__);
867                 break;
868         }
869         #if 0
870         Now in tranceiver!
871         /* This causes an interrupt */
872         register_bank(fir_base, 0);
873         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast, fir_base + IRCC_LCR_A);
874         #endif
875
876         register_bank(fir_base, 1);
877         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA);
878
879         register_bank(fir_base, 4);
880         outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL);
881 }
882
883 /*
884  * Function smsc_ircc_fir_start(self)
885  *
886  *    Change the speed of the device
887  *
888  */
889 static void smsc_ircc_fir_start(struct smsc_ircc_cb *self)
890 {
891         struct net_device *dev;
892         int fir_base;
893
894         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
895
896         IRDA_ASSERT(self != NULL, return;);
897         dev = self->netdev;
898         IRDA_ASSERT(dev != NULL, return;);
899
900         fir_base = self->io.fir_base;
901
902         /* Reset everything */
903
904         /* Install FIR transmit handler */
905         dev->hard_start_xmit = smsc_ircc_hard_xmit_fir;
906
907         /* Clear FIFO */
908         outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A);
909
910         /* Enable interrupt */
911         /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/
912
913         register_bank(fir_base, 1);
914
915         /* Select the TX/RX interface */
916 #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */
917         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM),
918              fir_base + IRCC_SCE_CFGB);
919 #else
920         outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR),
921              fir_base + IRCC_SCE_CFGB);
922 #endif
923         (void) inb(fir_base + IRCC_FIFO_THRESHOLD);
924
925         /* Enable SCE interrupts */
926         outb(0, fir_base + IRCC_MASTER);
927         register_bank(fir_base, 0);
928         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER);
929         outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER);
930 }
931
932 /*
933  * Function smsc_ircc_fir_stop(self, baud)
934  *
935  *    Change the speed of the device
936  *
937  */
938 static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self)
939 {
940         int fir_base;
941
942         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
943
944         IRDA_ASSERT(self != NULL, return;);
945
946         fir_base = self->io.fir_base;
947         register_bank(fir_base, 0);
948         /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/
949         outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B);
950 }
951
952
953 /*
954  * Function smsc_ircc_change_speed(self, baud)
955  *
956  *    Change the speed of the device
957  *
958  * This function *must* be called with spinlock held, because it may
959  * be called from the irq handler. - Jean II
960  */
961 static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed)
962 {
963         struct net_device *dev;
964         int last_speed_was_sir;
965
966         IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed);
967
968         IRDA_ASSERT(self != NULL, return;);
969         dev = self->netdev;
970
971         last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED;
972
973         #if 0
974         /* Temp Hack */
975         speed= 1152000;
976         self->io.speed = speed;
977         last_speed_was_sir = 0;
978         smsc_ircc_fir_start(self);
979         #endif
980
981         if (self->io.speed == 0)
982                 smsc_ircc_sir_start(self);
983
984         #if 0
985         if (!last_speed_was_sir) speed = self->io.speed;
986         #endif
987
988         if (self->io.speed != speed)
989                 smsc_ircc_set_transceiver_for_speed(self, speed);
990
991         self->io.speed = speed;
992
993         if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
994                 if (!last_speed_was_sir) {
995                         smsc_ircc_fir_stop(self);
996                         smsc_ircc_sir_start(self);
997                 }
998                 smsc_ircc_set_sir_speed(self, speed);
999         } else {
1000                 if (last_speed_was_sir) {
1001                         #if SMSC_IRCC2_C_SIR_STOP
1002                         smsc_ircc_sir_stop(self);
1003                         #endif
1004                         smsc_ircc_fir_start(self);
1005                 }
1006                 smsc_ircc_set_fir_speed(self, speed);
1007
1008                 #if 0
1009                 self->tx_buff.len = 10;
1010                 self->tx_buff.data = self->tx_buff.head;
1011
1012                 smsc_ircc_dma_xmit(self, 4000);
1013                 #endif
1014                 /* Be ready for incoming frames */
1015                 smsc_ircc_dma_receive(self);
1016         }
1017
1018         netif_wake_queue(dev);
1019 }
1020
1021 /*
1022  * Function smsc_ircc_set_sir_speed (self, speed)
1023  *
1024  *    Set speed of IrDA port to specified baudrate
1025  *
1026  */
1027 void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
1028 {
1029         int iobase;
1030         int fcr;    /* FIFO control reg */
1031         int lcr;    /* Line control reg */
1032         int divisor;
1033
1034         IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed);
1035
1036         IRDA_ASSERT(self != NULL, return;);
1037         iobase = self->io.sir_base;
1038
1039         /* Update accounting for new speed */
1040         self->io.speed = speed;
1041
1042         /* Turn off interrupts */
1043         outb(0, iobase + UART_IER);
1044
1045         divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed;
1046
1047         fcr = UART_FCR_ENABLE_FIFO;
1048
1049         /*
1050          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1051          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1052          * about this timeout since it will always be fast enough.
1053          */
1054         fcr |= self->io.speed < 38400 ?
1055                 UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1056
1057         /* IrDA ports use 8N1 */
1058         lcr = UART_LCR_WLEN8;
1059
1060         outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
1061         outb(divisor & 0xff,      iobase + UART_DLL); /* Set speed */
1062         outb(divisor >> 8,        iobase + UART_DLM);
1063         outb(lcr,                 iobase + UART_LCR); /* Set 8N1 */
1064         outb(fcr,                 iobase + UART_FCR); /* Enable FIFO's */
1065
1066         /* Turn on interrups */
1067         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
1068
1069         IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
1070 }
1071
1072
1073 /*
1074  * Function smsc_ircc_hard_xmit_fir (skb, dev)
1075  *
1076  *    Transmit the frame!
1077  *
1078  */
1079 static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev)
1080 {
1081         struct smsc_ircc_cb *self;
1082         unsigned long flags;
1083         s32 speed;
1084         int mtt;
1085
1086         IRDA_ASSERT(dev != NULL, return 0;);
1087         self = netdev_priv(dev);
1088         IRDA_ASSERT(self != NULL, return 0;);
1089
1090         netif_stop_queue(dev);
1091
1092         /* Make sure test of self->io.speed & speed change are atomic */
1093         spin_lock_irqsave(&self->lock, flags);
1094
1095         /* Check if we need to change the speed after this frame */
1096         speed = irda_get_next_speed(skb);
1097         if (speed != self->io.speed && speed != -1) {
1098                 /* Check for empty frame */
1099                 if (!skb->len) {
1100                         /* Note : you should make sure that speed changes
1101                          * are not going to corrupt any outgoing frame.
1102                          * Look at nsc-ircc for the gory details - Jean II */
1103                         smsc_ircc_change_speed(self, speed);
1104                         spin_unlock_irqrestore(&self->lock, flags);
1105                         dev_kfree_skb(skb);
1106                         return 0;
1107                 }
1108
1109                 self->new_speed = speed;
1110         }
1111
1112         memcpy(self->tx_buff.head, skb->data, skb->len);
1113
1114         self->tx_buff.len = skb->len;
1115         self->tx_buff.data = self->tx_buff.head;
1116
1117         mtt = irda_get_mtt(skb);
1118         if (mtt) {
1119                 int bofs;
1120
1121                 /*
1122                  * Compute how many BOFs (STA or PA's) we need to waste the
1123                  * min turn time given the speed of the link.
1124                  */
1125                 bofs = mtt * (self->io.speed / 1000) / 8000;
1126                 if (bofs > 4095)
1127                         bofs = 4095;
1128
1129                 smsc_ircc_dma_xmit(self, bofs);
1130         } else {
1131                 /* Transmit frame */
1132                 smsc_ircc_dma_xmit(self, 0);
1133         }
1134
1135         spin_unlock_irqrestore(&self->lock, flags);
1136         dev_kfree_skb(skb);
1137
1138         return 0;
1139 }
1140
1141 /*
1142  * Function smsc_ircc_dma_xmit (self, bofs)
1143  *
1144  *    Transmit data using DMA
1145  *
1146  */
1147 static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs)
1148 {
1149         int iobase = self->io.fir_base;
1150         u8 ctrl;
1151
1152         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1153 #if 1
1154         /* Disable Rx */
1155         register_bank(iobase, 0);
1156         outb(0x00, iobase + IRCC_LCR_B);
1157 #endif
1158         register_bank(iobase, 1);
1159         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1160              iobase + IRCC_SCE_CFGB);
1161
1162         self->io.direction = IO_XMIT;
1163
1164         /* Set BOF additional count for generating the min turn time */
1165         register_bank(iobase, 4);
1166         outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO);
1167         ctrl = inb(iobase + IRCC_CONTROL) & 0xf0;
1168         outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI);
1169
1170         /* Set max Tx frame size */
1171         outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI);
1172         outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO);
1173
1174         /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/
1175
1176         /* Enable burst mode chip Tx DMA */
1177         register_bank(iobase, 1);
1178         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1179              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1180
1181         /* Setup DMA controller (must be done after enabling chip DMA) */
1182         irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
1183                        DMA_TX_MODE);
1184
1185         /* Enable interrupt */
1186
1187         register_bank(iobase, 0);
1188         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1189         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1190
1191         /* Enable transmit */
1192         outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B);
1193 }
1194
1195 /*
1196  * Function smsc_ircc_dma_xmit_complete (self)
1197  *
1198  *    The transfer of a frame in finished. This function will only be called
1199  *    by the interrupt handler
1200  *
1201  */
1202 static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self)
1203 {
1204         int iobase = self->io.fir_base;
1205
1206         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1207 #if 0
1208         /* Disable Tx */
1209         register_bank(iobase, 0);
1210         outb(0x00, iobase + IRCC_LCR_B);
1211 #endif
1212         register_bank(iobase, 1);
1213         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1214              iobase + IRCC_SCE_CFGB);
1215
1216         /* Check for underrun! */
1217         register_bank(iobase, 0);
1218         if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) {
1219                 self->stats.tx_errors++;
1220                 self->stats.tx_fifo_errors++;
1221
1222                 /* Reset error condition */
1223                 register_bank(iobase, 0);
1224                 outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER);
1225                 outb(0x00, iobase + IRCC_MASTER);
1226         } else {
1227                 self->stats.tx_packets++;
1228                 self->stats.tx_bytes += self->tx_buff.len;
1229         }
1230
1231         /* Check if it's time to change the speed */
1232         if (self->new_speed) {
1233                 smsc_ircc_change_speed(self, self->new_speed);
1234                 self->new_speed = 0;
1235         }
1236
1237         netif_wake_queue(self->netdev);
1238 }
1239
1240 /*
1241  * Function smsc_ircc_dma_receive(self)
1242  *
1243  *    Get ready for receiving a frame. The device will initiate a DMA
1244  *    if it starts to receive a frame.
1245  *
1246  */
1247 static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self)
1248 {
1249         int iobase = self->io.fir_base;
1250 #if 0
1251         /* Turn off chip DMA */
1252         register_bank(iobase, 1);
1253         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1254              iobase + IRCC_SCE_CFGB);
1255 #endif
1256
1257         /* Disable Tx */
1258         register_bank(iobase, 0);
1259         outb(0x00, iobase + IRCC_LCR_B);
1260
1261         /* Turn off chip DMA */
1262         register_bank(iobase, 1);
1263         outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE,
1264              iobase + IRCC_SCE_CFGB);
1265
1266         self->io.direction = IO_RECV;
1267         self->rx_buff.data = self->rx_buff.head;
1268
1269         /* Set max Rx frame size */
1270         register_bank(iobase, 4);
1271         outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI);
1272         outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO);
1273
1274         /* Setup DMA controller */
1275         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1276                        DMA_RX_MODE);
1277
1278         /* Enable burst mode chip Rx DMA */
1279         register_bank(iobase, 1);
1280         outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE |
1281              IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB);
1282
1283         /* Enable interrupt */
1284         register_bank(iobase, 0);
1285         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1286         outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER);
1287
1288         /* Enable receiver */
1289         register_bank(iobase, 0);
1290         outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE,
1291              iobase + IRCC_LCR_B);
1292
1293         return 0;
1294 }
1295
1296 /*
1297  * Function smsc_ircc_dma_receive_complete(self)
1298  *
1299  *    Finished with receiving frames
1300  *
1301  */
1302 static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self)
1303 {
1304         struct sk_buff *skb;
1305         int len, msgcnt, lsr;
1306         int iobase = self->io.fir_base;
1307
1308         register_bank(iobase, 0);
1309
1310         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1311 #if 0
1312         /* Disable Rx */
1313         register_bank(iobase, 0);
1314         outb(0x00, iobase + IRCC_LCR_B);
1315 #endif
1316         register_bank(iobase, 0);
1317         outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR);
1318         lsr= inb(iobase + IRCC_LSR);
1319         msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
1320
1321         IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__,
1322                    get_dma_residue(self->io.dma));
1323
1324         len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
1325
1326         /* Look for errors */
1327         if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) {
1328                 self->stats.rx_errors++;
1329                 if (lsr & IRCC_LSR_FRAME_ERROR)
1330                         self->stats.rx_frame_errors++;
1331                 if (lsr & IRCC_LSR_CRC_ERROR)
1332                         self->stats.rx_crc_errors++;
1333                 if (lsr & IRCC_LSR_SIZE_ERROR)
1334                         self->stats.rx_length_errors++;
1335                 if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN))
1336                         self->stats.rx_length_errors++;
1337                 return;
1338         }
1339
1340         /* Remove CRC */
1341         len -= self->io.speed < 4000000 ? 2 : 4;
1342
1343         if (len < 2 || len > 2050) {
1344                 IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len);
1345                 return;
1346         }
1347         IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len);
1348
1349         skb = dev_alloc_skb(len + 1);
1350         if (!skb) {
1351                 IRDA_WARNING("%s(), memory squeeze, dropping frame.\n",
1352                              __FUNCTION__);
1353                 return;
1354         }
1355         /* Make sure IP header gets aligned */
1356         skb_reserve(skb, 1);
1357
1358         memcpy(skb_put(skb, len), self->rx_buff.data, len);
1359         self->stats.rx_packets++;
1360         self->stats.rx_bytes += len;
1361
1362         skb->dev = self->netdev;
1363         skb->mac.raw  = skb->data;
1364         skb->protocol = htons(ETH_P_IRDA);
1365         netif_rx(skb);
1366 }
1367
1368 /*
1369  * Function smsc_ircc_sir_receive (self)
1370  *
1371  *    Receive one frame from the infrared port
1372  *
1373  */
1374 static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self)
1375 {
1376         int boguscount = 0;
1377         int iobase;
1378
1379         IRDA_ASSERT(self != NULL, return;);
1380
1381         iobase = self->io.sir_base;
1382
1383         /*
1384          * Receive all characters in Rx FIFO, unwrap and unstuff them.
1385          * async_unwrap_char will deliver all found frames
1386          */
1387         do {
1388                 async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
1389                                   inb(iobase + UART_RX));
1390
1391                 /* Make sure we don't stay here to long */
1392                 if (boguscount++ > 32) {
1393                         IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__);
1394                         break;
1395                 }
1396         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
1397 }
1398
1399
1400 /*
1401  * Function smsc_ircc_interrupt (irq, dev_id, regs)
1402  *
1403  *    An interrupt from the chip has arrived. Time to do some work
1404  *
1405  */
1406 static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1407 {
1408         struct net_device *dev = (struct net_device *) dev_id;
1409         struct smsc_ircc_cb *self;
1410         int iobase, iir, lcra, lsr;
1411         irqreturn_t ret = IRQ_NONE;
1412
1413         if (dev == NULL) {
1414                 printk(KERN_WARNING "%s: irq %d for unknown device.\n",
1415                        driver_name, irq);
1416                 goto irq_ret;
1417         }
1418
1419         self = netdev_priv(dev);
1420         IRDA_ASSERT(self != NULL, return IRQ_NONE;);
1421
1422         /* Serialise the interrupt handler in various CPUs, stop Tx path */
1423         spin_lock(&self->lock);
1424
1425         /* Check if we should use the SIR interrupt handler */
1426         if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) {
1427                 ret = smsc_ircc_interrupt_sir(dev);
1428                 goto irq_ret_unlock;
1429         }
1430
1431         iobase = self->io.fir_base;
1432
1433         register_bank(iobase, 0);
1434         iir = inb(iobase + IRCC_IIR);
1435         if (iir == 0)
1436                 goto irq_ret_unlock;
1437         ret = IRQ_HANDLED;
1438
1439         /* Disable interrupts */
1440         outb(0, iobase + IRCC_IER);
1441         lcra = inb(iobase + IRCC_LCR_A);
1442         lsr = inb(iobase + IRCC_LSR);
1443
1444         IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir);
1445
1446         if (iir & IRCC_IIR_EOM) {
1447                 if (self->io.direction == IO_RECV)
1448                         smsc_ircc_dma_receive_complete(self);
1449                 else
1450                         smsc_ircc_dma_xmit_complete(self);
1451
1452                 smsc_ircc_dma_receive(self);
1453         }
1454
1455         if (iir & IRCC_IIR_ACTIVE_FRAME) {
1456                 /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/
1457         }
1458
1459         /* Enable interrupts again */
1460
1461         register_bank(iobase, 0);
1462         outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER);
1463
1464  irq_ret_unlock:
1465         spin_unlock(&self->lock);
1466  irq_ret:
1467         return ret;
1468 }
1469
1470 /*
1471  * Function irport_interrupt_sir (irq, dev_id, regs)
1472  *
1473  *    Interrupt handler for SIR modes
1474  */
1475 static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
1476 {
1477         struct smsc_ircc_cb *self = netdev_priv(dev);
1478         int boguscount = 0;
1479         int iobase;
1480         int iir, lsr;
1481
1482         /* Already locked comming here in smsc_ircc_interrupt() */
1483         /*spin_lock(&self->lock);*/
1484
1485         iobase = self->io.sir_base;
1486
1487         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1488         if (iir == 0)
1489                 return IRQ_NONE;
1490         while (iir) {
1491                 /* Clear interrupt */
1492                 lsr = inb(iobase + UART_LSR);
1493
1494                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
1495                             __FUNCTION__, iir, lsr, iobase);
1496
1497                 switch (iir) {
1498                 case UART_IIR_RLSI:
1499                         IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
1500                         break;
1501                 case UART_IIR_RDI:
1502                         /* Receive interrupt */
1503                         smsc_ircc_sir_receive(self);
1504                         break;
1505                 case UART_IIR_THRI:
1506                         if (lsr & UART_LSR_THRE)
1507                                 /* Transmitter ready for data */
1508                                 smsc_ircc_sir_write_wakeup(self);
1509                         break;
1510                 default:
1511                         IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
1512                                    __FUNCTION__, iir);
1513                         break;
1514                 }
1515
1516                 /* Make sure we don't stay here to long */
1517                 if (boguscount++ > 100)
1518                         break;
1519
1520                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
1521         }
1522         /*spin_unlock(&self->lock);*/
1523         return IRQ_HANDLED;
1524 }
1525
1526
1527 #if 0 /* unused */
1528 /*
1529  * Function ircc_is_receiving (self)
1530  *
1531  *    Return TRUE is we are currently receiving a frame
1532  *
1533  */
1534 static int ircc_is_receiving(struct smsc_ircc_cb *self)
1535 {
1536         int status = FALSE;
1537         /* int iobase; */
1538
1539         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1540
1541         IRDA_ASSERT(self != NULL, return FALSE;);
1542
1543         IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__,
1544                    get_dma_residue(self->io.dma));
1545
1546         status = (self->rx_buff.state != OUTSIDE_FRAME);
1547
1548         return status;
1549 }
1550 #endif /* unused */
1551
1552 static int smsc_ircc_request_irq(struct smsc_ircc_cb *self)
1553 {
1554         int error;
1555
1556         error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
1557                             self->netdev->name, self->netdev);
1558         if (error)
1559                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
1560                            __FUNCTION__, self->io.irq, error);
1561
1562         return error;
1563 }
1564
1565 static void smsc_ircc_start_interrupts(struct smsc_ircc_cb *self)
1566 {
1567         unsigned long flags;
1568
1569         spin_lock_irqsave(&self->lock, flags);
1570
1571         self->io.speed = 0;
1572         smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED);
1573
1574         spin_unlock_irqrestore(&self->lock, flags);
1575 }
1576
1577 static void smsc_ircc_stop_interrupts(struct smsc_ircc_cb *self)
1578 {
1579         int iobase = self->io.fir_base;
1580         unsigned long flags;
1581
1582         spin_lock_irqsave(&self->lock, flags);
1583
1584         register_bank(iobase, 0);
1585         outb(0, iobase + IRCC_IER);
1586         outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER);
1587         outb(0x00, iobase + IRCC_MASTER);
1588
1589         spin_unlock_irqrestore(&self->lock, flags);
1590 }
1591
1592
1593 /*
1594  * Function smsc_ircc_net_open (dev)
1595  *
1596  *    Start the device
1597  *
1598  */
1599 static int smsc_ircc_net_open(struct net_device *dev)
1600 {
1601         struct smsc_ircc_cb *self;
1602         char hwname[16];
1603
1604         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1605
1606         IRDA_ASSERT(dev != NULL, return -1;);
1607         self = netdev_priv(dev);
1608         IRDA_ASSERT(self != NULL, return 0;);
1609
1610         if (self->io.suspended) {
1611                 IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__);
1612                 return -EAGAIN;
1613         }
1614
1615         if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
1616                         (void *) dev)) {
1617                 IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
1618                            __FUNCTION__, self->io.irq);
1619                 return -EAGAIN;
1620         }
1621
1622         smsc_ircc_start_interrupts(self);
1623
1624         /* Give self a hardware name */
1625         /* It would be cool to offer the chip revision here - Jean II */
1626         sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base);
1627
1628         /*
1629          * Open new IrLAP layer instance, now that everything should be
1630          * initialized properly
1631          */
1632         self->irlap = irlap_open(dev, &self->qos, hwname);
1633
1634         /*
1635          * Always allocate the DMA channel after the IRQ,
1636          * and clean up on failure.
1637          */
1638         if (request_dma(self->io.dma, dev->name)) {
1639                 smsc_ircc_net_close(dev);
1640
1641                 IRDA_WARNING("%s(), unable to allocate DMA=%d\n",
1642                              __FUNCTION__, self->io.dma);
1643                 return -EAGAIN;
1644         }
1645
1646         netif_start_queue(dev);
1647
1648         return 0;
1649 }
1650
1651 /*
1652  * Function smsc_ircc_net_close (dev)
1653  *
1654  *    Stop the device
1655  *
1656  */
1657 static int smsc_ircc_net_close(struct net_device *dev)
1658 {
1659         struct smsc_ircc_cb *self;
1660
1661         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1662
1663         IRDA_ASSERT(dev != NULL, return -1;);
1664         self = netdev_priv(dev);
1665         IRDA_ASSERT(self != NULL, return 0;);
1666
1667         /* Stop device */
1668         netif_stop_queue(dev);
1669
1670         /* Stop and remove instance of IrLAP */
1671         if (self->irlap)
1672                 irlap_close(self->irlap);
1673         self->irlap = NULL;
1674
1675         smsc_ircc_stop_interrupts(self);
1676
1677         /* if we are called from smsc_ircc_resume we don't have IRQ reserved */
1678         if (!self->io.suspended)
1679                 free_irq(self->io.irq, dev);
1680
1681         disable_dma(self->io.dma);
1682         free_dma(self->io.dma);
1683
1684         return 0;
1685 }
1686
1687 static int smsc_ircc_suspend(struct device *dev, pm_message_t state)
1688 {
1689         struct smsc_ircc_cb *self = dev_get_drvdata(dev);
1690
1691         if (!self->io.suspended) {
1692                 IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
1693
1694                 rtnl_lock();
1695                 if (netif_running(self->netdev)) {
1696                         netif_device_detach(self->netdev);
1697                         smsc_ircc_stop_interrupts(self);
1698                         free_irq(self->io.irq, self->netdev);
1699                         disable_dma(self->io.dma);
1700                 }
1701                 self->io.suspended = 1;
1702                 rtnl_unlock();
1703         }
1704
1705         return 0;
1706 }
1707
1708 static int smsc_ircc_resume(struct device *dev)
1709 {
1710         struct smsc_ircc_cb *self = dev_get_drvdata(dev);
1711
1712         if (self->io.suspended) {
1713                 IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
1714
1715                 rtnl_lock();
1716                 smsc_ircc_init_chip(self);
1717                 if (netif_running(self->netdev)) {
1718                         if (smsc_ircc_request_irq(self)) {
1719                                 /*
1720                                  * Don't fail resume process, just kill this
1721                                  * network interface
1722                                  */
1723                                 unregister_netdevice(self->netdev);
1724                         } else {
1725                                 enable_dma(self->io.dma);
1726                                 smsc_ircc_start_interrupts(self);
1727                                 netif_device_attach(self->netdev);
1728                         }
1729                 }
1730                 self->io.suspended = 0;
1731                 rtnl_unlock();
1732         }
1733         return 0;
1734 }
1735
1736 /*
1737  * Function smsc_ircc_close (self)
1738  *
1739  *    Close driver instance
1740  *
1741  */
1742 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
1743 {
1744         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1745
1746         IRDA_ASSERT(self != NULL, return -1;);
1747
1748         platform_device_unregister(self->pldev);
1749
1750         /* Remove netdevice */
1751         unregister_netdev(self->netdev);
1752
1753         smsc_ircc_stop_interrupts(self);
1754
1755         /* Release the PORTS that this driver is using */
1756         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __FUNCTION__,
1757                    self->io.fir_base);
1758
1759         release_region(self->io.fir_base, self->io.fir_ext);
1760
1761         IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__,
1762                    self->io.sir_base);
1763
1764         release_region(self->io.sir_base, self->io.sir_ext);
1765
1766         if (self->tx_buff.head)
1767                 dma_free_coherent(NULL, self->tx_buff.truesize,
1768                                   self->tx_buff.head, self->tx_buff_dma);
1769
1770         if (self->rx_buff.head)
1771                 dma_free_coherent(NULL, self->rx_buff.truesize,
1772                                   self->rx_buff.head, self->rx_buff_dma);
1773
1774         free_netdev(self->netdev);
1775
1776         return 0;
1777 }
1778
1779 static void __exit smsc_ircc_cleanup(void)
1780 {
1781         int i;
1782
1783         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
1784
1785         for (i = 0; i < 2; i++) {
1786                 if (dev_self[i])
1787                         smsc_ircc_close(dev_self[i]);
1788         }
1789
1790         driver_unregister(&smsc_ircc_driver);
1791 }
1792
1793 /*
1794  *      Start SIR operations
1795  *
1796  * This function *must* be called with spinlock held, because it may
1797  * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II
1798  */
1799 void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
1800 {
1801         struct net_device *dev;
1802         int fir_base, sir_base;
1803
1804         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1805
1806         IRDA_ASSERT(self != NULL, return;);
1807         dev = self->netdev;
1808         IRDA_ASSERT(dev != NULL, return;);
1809         dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir;
1810
1811         fir_base = self->io.fir_base;
1812         sir_base = self->io.sir_base;
1813
1814         /* Reset everything */
1815         outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);
1816
1817         #if SMSC_IRCC2_C_SIR_STOP
1818         /*smsc_ircc_sir_stop(self);*/
1819         #endif
1820
1821         register_bank(fir_base, 1);
1822         outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA);
1823
1824         /* Initialize UART */
1825         outb(UART_LCR_WLEN8, sir_base + UART_LCR);  /* Reset DLAB */
1826         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
1827
1828         /* Turn on interrups */
1829         outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
1830
1831         IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
1832
1833         outb(0x00, fir_base + IRCC_MASTER);
1834 }
1835
1836 #if SMSC_IRCC2_C_SIR_STOP
1837 void smsc_ircc_sir_stop(struct smsc_ircc_cb *self)
1838 {
1839         int iobase;
1840
1841         IRDA_DEBUG(3, "%s\n", __FUNCTION__);
1842         iobase = self->io.sir_base;
1843
1844         /* Reset UART */
1845         outb(0, iobase + UART_MCR);
1846
1847         /* Turn off interrupts */
1848         outb(0, iobase + UART_IER);
1849 }
1850 #endif
1851
1852 /*
1853  * Function smsc_sir_write_wakeup (self)
1854  *
1855  *    Called by the SIR interrupt handler when there's room for more data.
1856  *    If we have more packets to send, we send them here.
1857  *
1858  */
1859 static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self)
1860 {
1861         int actual = 0;
1862         int iobase;
1863         int fcr;
1864
1865         IRDA_ASSERT(self != NULL, return;);
1866
1867         IRDA_DEBUG(4, "%s\n", __FUNCTION__);
1868
1869         iobase = self->io.sir_base;
1870
1871         /* Finished with frame?  */
1872         if (self->tx_buff.len > 0)  {
1873                 /* Write data left in transmit buffer */
1874                 actual = smsc_ircc_sir_write(iobase, self->io.fifo_size,
1875                                       self->tx_buff.data, self->tx_buff.len);
1876                 self->tx_buff.data += actual;
1877                 self->tx_buff.len  -= actual;
1878         } else {
1879
1880         /*if (self->tx_buff.len ==0)  {*/
1881
1882                 /*
1883                  *  Now serial buffer is almost free & we can start
1884                  *  transmission of another packet. But first we must check
1885                  *  if we need to change the speed of the hardware
1886                  */
1887                 if (self->new_speed) {
1888                         IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
1889                                    __FUNCTION__, self->new_speed);
1890                         smsc_ircc_sir_wait_hw_transmitter_finish(self);
1891                         smsc_ircc_change_speed(self, self->new_speed);
1892                         self->new_speed = 0;
1893                 } else {
1894                         /* Tell network layer that we want more frames */
1895                         netif_wake_queue(self->netdev);
1896                 }
1897                 self->stats.tx_packets++;
1898
1899                 if (self->io.speed <= 115200) {
1900                         /*
1901                          * Reset Rx FIFO to make sure that all reflected transmit data
1902                          * is discarded. This is needed for half duplex operation
1903                          */
1904                         fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR;
1905                         fcr |= self->io.speed < 38400 ?
1906                                         UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14;
1907
1908                         outb(fcr, iobase + UART_FCR);
1909
1910                         /* Turn on receive interrupts */
1911                         outb(UART_IER_RDI, iobase + UART_IER);
1912                 }
1913         }
1914 }
1915
1916 /*
1917  * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len)
1918  *
1919  *    Fill Tx FIFO with transmit data
1920  *
1921  */
1922 static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1923 {
1924         int actual = 0;
1925
1926         /* Tx FIFO should be empty! */
1927         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) {
1928                 IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__);
1929                 return 0;
1930         }
1931
1932         /* Fill FIFO with current frame */
1933         while (fifo_size-- > 0 && actual < len) {
1934                 /* Transmit next byte */
1935                 outb(buf[actual], iobase + UART_TX);
1936                 actual++;
1937         }
1938         return actual;
1939 }
1940
1941 /*
1942  * Function smsc_ircc_is_receiving (self)
1943  *
1944  *    Returns true is we are currently receiving data
1945  *
1946  */
1947 static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self)
1948 {
1949         return (self->rx_buff.state != OUTSIDE_FRAME);
1950 }
1951
1952
1953 /*
1954  * Function smsc_ircc_probe_transceiver(self)
1955  *
1956  *    Tries to find the used Transceiver
1957  *
1958  */
1959 static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self)
1960 {
1961         unsigned int    i;
1962
1963         IRDA_ASSERT(self != NULL, return;);
1964
1965         for (i = 0; smsc_transceivers[i].name != NULL; i++)
1966                 if (smsc_transceivers[i].probe(self->io.fir_base)) {
1967                         IRDA_MESSAGE(" %s transceiver found\n",
1968                                      smsc_transceivers[i].name);
1969                         self->transceiver= i + 1;
1970                         return;
1971                 }
1972
1973         IRDA_MESSAGE("No transceiver found. Defaulting to %s\n",
1974                      smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name);
1975
1976         self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER;
1977 }
1978
1979
1980 /*
1981  * Function smsc_ircc_set_transceiver_for_speed(self, speed)
1982  *
1983  *    Set the transceiver according to the speed
1984  *
1985  */
1986 static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed)
1987 {
1988         unsigned int trx;
1989
1990         trx = self->transceiver;
1991         if (trx > 0)
1992                 smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed);
1993 }
1994
1995 /*
1996  * Function smsc_ircc_wait_hw_transmitter_finish ()
1997  *
1998  *    Wait for the real end of HW transmission
1999  *
2000  * The UART is a strict FIFO, and we get called only when we have finished
2001  * pushing data to the FIFO, so the maximum amount of time we must wait
2002  * is only for the FIFO to drain out.
2003  *
2004  * We use a simple calibrated loop. We may need to adjust the loop
2005  * delay (udelay) to balance I/O traffic and latency. And we also need to
2006  * adjust the maximum timeout.
2007  * It would probably be better to wait for the proper interrupt,
2008  * but it doesn't seem to be available.
2009  *
2010  * We can't use jiffies or kernel timers because :
2011  * 1) We are called from the interrupt handler, which disable softirqs,
2012  * so jiffies won't be increased
2013  * 2) Jiffies granularity is usually very coarse (10ms), and we don't
2014  * want to wait that long to detect stuck hardware.
2015  * Jean II
2016  */
2017
2018 static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
2019 {
2020         int iobase = self->io.sir_base;
2021         int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US;
2022
2023         /* Calibrated busy loop */
2024         while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT))
2025                 udelay(1);
2026
2027         if (count == 0)
2028                 IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__);
2029 }
2030
2031
2032 /* PROBING
2033  *
2034  *
2035  */
2036
2037 static int __init smsc_ircc_look_for_chips(void)
2038 {
2039         struct smsc_chip_address *address;
2040         char *type;
2041         unsigned int cfg_base, found;
2042
2043         found = 0;
2044         address = possible_addresses;
2045
2046         while (address->cfg_base) {
2047                 cfg_base = address->cfg_base;
2048
2049                 /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/
2050
2051                 if (address->type & SMSCSIO_TYPE_FDC) {
2052                         type = "FDC";
2053                         if (address->type & SMSCSIO_TYPE_FLAT)
2054                                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type))
2055                                         found++;
2056
2057                         if (address->type & SMSCSIO_TYPE_PAGED)
2058                                 if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type))
2059                                         found++;
2060                 }
2061                 if (address->type & SMSCSIO_TYPE_LPC) {
2062                         type = "LPC";
2063                         if (address->type & SMSCSIO_TYPE_FLAT)
2064                                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type))
2065                                         found++;
2066
2067                         if (address->type & SMSCSIO_TYPE_PAGED)
2068                                 if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type))
2069                                         found++;
2070                 }
2071                 address++;
2072         }
2073         return found;
2074 }
2075
2076 /*
2077  * Function smsc_superio_flat (chip, base, type)
2078  *
2079  *    Try to get configuration of a smc SuperIO chip with flat register model
2080  *
2081  */
2082 static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type)
2083 {
2084         unsigned short firbase, sirbase;
2085         u8 mode, dma, irq;
2086         int ret = -ENODEV;
2087
2088         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2089
2090         if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
2091                 return ret;
2092
2093         outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase);
2094         mode = inb(cfgbase + 1);
2095
2096         /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/
2097
2098         if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA))
2099                 IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__);
2100
2101         outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase);
2102         sirbase = inb(cfgbase + 1) << 2;
2103
2104         /* FIR iobase */
2105         outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase);
2106         firbase = inb(cfgbase + 1) << 3;
2107
2108         /* DMA */
2109         outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase);
2110         dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK;
2111
2112         /* IRQ */
2113         outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase);
2114         irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK;
2115
2116         IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode);
2117
2118         if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0)
2119                 ret = 0;
2120
2121         /* Exit configuration */
2122         outb(SMSCSIO_CFGEXITKEY, cfgbase);
2123
2124         return ret;
2125 }
2126
2127 /*
2128  * Function smsc_superio_paged (chip, base, type)
2129  *
2130  *    Try  to get configuration of a smc SuperIO chip with paged register model
2131  *
2132  */
2133 static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type)
2134 {
2135         unsigned short fir_io, sir_io;
2136         int ret = -ENODEV;
2137
2138         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2139
2140         if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
2141                 return ret;
2142
2143         /* Select logical device (UART2) */
2144         outb(0x07, cfg_base);
2145         outb(0x05, cfg_base + 1);
2146
2147         /* SIR iobase */
2148         outb(0x60, cfg_base);
2149         sir_io = inb(cfg_base + 1) << 8;
2150         outb(0x61, cfg_base);
2151         sir_io |= inb(cfg_base + 1);
2152
2153         /* Read FIR base */
2154         outb(0x62, cfg_base);
2155         fir_io = inb(cfg_base + 1) << 8;
2156         outb(0x63, cfg_base);
2157         fir_io |= inb(cfg_base + 1);
2158         outb(0x2b, cfg_base); /* ??? */
2159
2160         if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0)
2161                 ret = 0;
2162
2163         /* Exit configuration */
2164         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2165
2166         return ret;
2167 }
2168
2169
2170 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
2171 {
2172         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2173
2174         outb(reg, cfg_base);
2175         return inb(cfg_base) != reg ? -1 : 0;
2176 }
2177
2178 static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type)
2179 {
2180         u8 devid, xdevid, rev;
2181
2182         IRDA_DEBUG(1, "%s\n", __FUNCTION__);
2183
2184         /* Leave configuration */
2185
2186         outb(SMSCSIO_CFGEXITKEY, cfg_base);
2187
2188         if (inb(cfg_base) == SMSCSIO_CFGEXITKEY)        /* not a smc superio chip */
2189                 return NULL;
2190
2191         outb(reg, cfg_base);
2192
2193         xdevid = inb(cfg_base + 1);
2194
2195         /* Enter configuration */
2196
2197         outb(SMSCSIO_CFGACCESSKEY, cfg_base);
2198
2199         #if 0
2200         if (smsc_access(cfg_base,0x55)) /* send second key and check */
2201                 return NULL;
2202         #endif
2203
2204         /* probe device ID */
2205
2206         if (smsc_access(cfg_base, reg))
2207                 return NULL;
2208
2209         devid = inb(cfg_base + 1);
2210
2211         if (devid == 0 || devid == 0xff)        /* typical values for unused port */
2212                 return NULL;
2213
2214         /* probe revision ID */
2215
2216         if (smsc_access(cfg_base, reg + 1))
2217                 return NULL;
2218
2219         rev = inb(cfg_base + 1);
2220
2221         if (rev >= 128)                 /* i think this will make no sense */
2222                 return NULL;
2223
2224         if (devid == xdevid)            /* protection against false positives */
2225                 return NULL;
2226
2227         /* Check for expected device ID; are there others? */
2228
2229         while (chip->devid != devid) {
2230
2231                 chip++;
2232
2233                 if (chip->name == NULL)
2234                         return NULL;
2235         }
2236
2237         IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n",
2238                      devid, rev, cfg_base, type, chip->name);
2239
2240         if (chip->rev > rev) {
2241                 IRDA_MESSAGE("Revision higher than expected\n");
2242                 return NULL;
2243         }
2244
2245         if (chip->flags & NoIRDA)
2246                 IRDA_MESSAGE("chipset does not support IRDA\n");
2247
2248         return chip;
2249 }
2250
2251 static int __init smsc_superio_fdc(unsigned short cfg_base)
2252 {
2253         int ret = -1;
2254
2255         if (!request_region(cfg_base, 2, driver_name)) {
2256                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2257                              __FUNCTION__, cfg_base);
2258         } else {
2259                 if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") ||
2260                     !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC"))
2261                         ret =  0;
2262
2263                 release_region(cfg_base, 2);
2264         }
2265
2266         return ret;
2267 }
2268
2269 static int __init smsc_superio_lpc(unsigned short cfg_base)
2270 {
2271         int ret = -1;
2272
2273         if (!request_region(cfg_base, 2, driver_name)) {
2274                 IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n",
2275                              __FUNCTION__, cfg_base);
2276         } else {
2277                 if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") ||
2278                     !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC"))
2279                         ret = 0;
2280
2281                 release_region(cfg_base, 2);
2282         }
2283         return ret;
2284 }
2285
2286 /************************************************
2287  *
2288  * Transceivers specific functions
2289  *
2290  ************************************************/
2291
2292
2293 /*
2294  * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed)
2295  *
2296  *    Program transceiver through smsc-ircc ATC circuitry
2297  *
2298  */
2299
2300 static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed)
2301 {
2302         unsigned long jiffies_now, jiffies_timeout;
2303         u8 val;
2304
2305         jiffies_now = jiffies;
2306         jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES;
2307
2308         /* ATC */
2309         register_bank(fir_base, 4);
2310         outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE,
2311              fir_base + IRCC_ATC);
2312
2313         while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) &&
2314                 !time_after(jiffies, jiffies_timeout))
2315                 /* empty */;
2316
2317         if (val)
2318                 IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__,
2319                              inb(fir_base + IRCC_ATC));
2320 }
2321
2322 /*
2323  * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base)
2324  *
2325  *    Probe transceiver smsc-ircc ATC circuitry
2326  *
2327  */
2328
2329 static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base)
2330 {
2331         return 0;
2332 }
2333
2334 /*
2335  * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed)
2336  *
2337  *    Set transceiver
2338  *
2339  */
2340
2341 static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed)
2342 {
2343         u8 fast_mode;
2344
2345         switch (speed) {
2346         default:
2347         case 576000 :
2348                 fast_mode = 0;
2349                 break;
2350         case 1152000 :
2351         case 4000000 :
2352                 fast_mode = IRCC_LCR_A_FAST;
2353                 break;
2354         }
2355         register_bank(fir_base, 0);
2356         outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2357 }
2358
2359 /*
2360  * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base)
2361  *
2362  *    Probe transceiver
2363  *
2364  */
2365
2366 static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base)
2367 {
2368         return 0;
2369 }
2370
2371 /*
2372  * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed)
2373  *
2374  *    Set transceiver
2375  *
2376  */
2377
2378 static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed)
2379 {
2380         u8 fast_mode;
2381
2382         switch (speed) {
2383         default:
2384         case 576000 :
2385                 fast_mode = 0;
2386                 break;
2387         case 1152000 :
2388         case 4000000 :
2389                 fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA;
2390                 break;
2391
2392         }
2393         /* This causes an interrupt */
2394         register_bank(fir_base, 0);
2395         outb((inb(fir_base + IRCC_LCR_A) &  0xbf) | fast_mode, fir_base + IRCC_LCR_A);
2396 }
2397
2398 /*
2399  * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base)
2400  *
2401  *    Probe transceiver
2402  *
2403  */
2404
2405 static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base)
2406 {
2407         return 0;
2408 }
2409
2410
2411 module_init(smsc_ircc_init);
2412 module_exit(smsc_ircc_cleanup);