Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6.git] / drivers / net / enc28j60.c
1 /*
2  * Microchip ENC28J60 ethernet driver (MAC + PHY)
3  *
4  * Copyright (C) 2007 Eurek srl
5  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
6  * based on enc28j60.c written by David Anders for 2.4 kernel version
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
14  */
15
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/types.h>
19 #include <linux/fcntl.h>
20 #include <linux/interrupt.h>
21 #include <linux/slab.h>
22 #include <linux/string.h>
23 #include <linux/errno.h>
24 #include <linux/init.h>
25 #include <linux/netdevice.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ethtool.h>
28 #include <linux/tcp.h>
29 #include <linux/skbuff.h>
30 #include <linux/delay.h>
31 #include <linux/spi/spi.h>
32
33 #include "enc28j60_hw.h"
34
35 #define DRV_NAME        "enc28j60"
36 #define DRV_VERSION     "1.01"
37
38 #define SPI_OPLEN       1
39
40 #define ENC28J60_MSG_DEFAULT    \
41         (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
42
43 /* Buffer size required for the largest SPI transfer (i.e., reading a
44  * frame). */
45 #define SPI_TRANSFER_BUF_LEN    (4 + MAX_FRAMELEN)
46
47 #define TX_TIMEOUT      (4 * HZ)
48
49 /* Max TX retries in case of collision as suggested by errata datasheet */
50 #define MAX_TX_RETRYCOUNT       16
51
52 enum {
53         RXFILTER_NORMAL,
54         RXFILTER_MULTI,
55         RXFILTER_PROMISC
56 };
57
58 /* Driver local data */
59 struct enc28j60_net {
60         struct net_device *netdev;
61         struct spi_device *spi;
62         struct mutex lock;
63         struct sk_buff *tx_skb;
64         struct work_struct tx_work;
65         struct work_struct irq_work;
66         struct work_struct setrx_work;
67         struct work_struct restart_work;
68         u8 bank;                /* current register bank selected */
69         u16 next_pk_ptr;        /* next packet pointer within FIFO */
70         u16 max_pk_counter;     /* statistics: max packet counter */
71         u16 tx_retry_count;
72         bool hw_enable;
73         bool full_duplex;
74         int rxfilter;
75         u32 msg_enable;
76         u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
77 };
78
79 /* use ethtool to change the level for any given device */
80 static struct {
81         u32 msg_enable;
82 } debug = { -1 };
83
84 /*
85  * SPI read buffer
86  * wait for the SPI transfer and copy received data to destination
87  */
88 static int
89 spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
90 {
91         u8 *rx_buf = priv->spi_transfer_buf + 4;
92         u8 *tx_buf = priv->spi_transfer_buf;
93         struct spi_transfer t = {
94                 .tx_buf = tx_buf,
95                 .rx_buf = rx_buf,
96                 .len = SPI_OPLEN + len,
97         };
98         struct spi_message msg;
99         int ret;
100
101         tx_buf[0] = ENC28J60_READ_BUF_MEM;
102         tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
103
104         spi_message_init(&msg);
105         spi_message_add_tail(&t, &msg);
106         ret = spi_sync(priv->spi, &msg);
107         if (ret == 0) {
108                 memcpy(data, &rx_buf[SPI_OPLEN], len);
109                 ret = msg.status;
110         }
111         if (ret && netif_msg_drv(priv))
112                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
113                         __func__, ret);
114
115         return ret;
116 }
117
118 /*
119  * SPI write buffer
120  */
121 static int spi_write_buf(struct enc28j60_net *priv, int len,
122                          const u8 *data)
123 {
124         int ret;
125
126         if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
127                 ret = -EINVAL;
128         else {
129                 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
130                 memcpy(&priv->spi_transfer_buf[1], data, len);
131                 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
132                 if (ret && netif_msg_drv(priv))
133                         printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
134                                 __func__, ret);
135         }
136         return ret;
137 }
138
139 /*
140  * basic SPI read operation
141  */
142 static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
143                            u8 addr)
144 {
145         u8 tx_buf[2];
146         u8 rx_buf[4];
147         u8 val = 0;
148         int ret;
149         int slen = SPI_OPLEN;
150
151         /* do dummy read if needed */
152         if (addr & SPRD_MASK)
153                 slen++;
154
155         tx_buf[0] = op | (addr & ADDR_MASK);
156         ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
157         if (ret)
158                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
159                         __func__, ret);
160         else
161                 val = rx_buf[slen - 1];
162
163         return val;
164 }
165
166 /*
167  * basic SPI write operation
168  */
169 static int spi_write_op(struct enc28j60_net *priv, u8 op,
170                         u8 addr, u8 val)
171 {
172         int ret;
173
174         priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
175         priv->spi_transfer_buf[1] = val;
176         ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
177         if (ret && netif_msg_drv(priv))
178                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
179                         __func__, ret);
180         return ret;
181 }
182
183 static void enc28j60_soft_reset(struct enc28j60_net *priv)
184 {
185         if (netif_msg_hw(priv))
186                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
187
188         spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
189         /* Errata workaround #1, CLKRDY check is unreliable,
190          * delay at least 1 mS instead */
191         udelay(2000);
192 }
193
194 /*
195  * select the current register bank if necessary
196  */
197 static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
198 {
199         if ((addr & BANK_MASK) != priv->bank) {
200                 u8 b = (addr & BANK_MASK) >> 5;
201
202                 if (b != (ECON1_BSEL1 | ECON1_BSEL0))
203                         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
204                                      ECON1_BSEL1 | ECON1_BSEL0);
205                 if (b != 0)
206                         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1, b);
207                 priv->bank = (addr & BANK_MASK);
208         }
209 }
210
211 /*
212  * Register access routines through the SPI bus.
213  * Every register access comes in two flavours:
214  * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
215  *   atomically more than one register
216  * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
217  *
218  * Some registers can be accessed through the bit field clear and
219  * bit field set to avoid a read modify write cycle.
220  */
221
222 /*
223  * Register bit field Set
224  */
225 static void nolock_reg_bfset(struct enc28j60_net *priv,
226                                       u8 addr, u8 mask)
227 {
228         enc28j60_set_bank(priv, addr);
229         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
230 }
231
232 static void locked_reg_bfset(struct enc28j60_net *priv,
233                                       u8 addr, u8 mask)
234 {
235         mutex_lock(&priv->lock);
236         nolock_reg_bfset(priv, addr, mask);
237         mutex_unlock(&priv->lock);
238 }
239
240 /*
241  * Register bit field Clear
242  */
243 static void nolock_reg_bfclr(struct enc28j60_net *priv,
244                                       u8 addr, u8 mask)
245 {
246         enc28j60_set_bank(priv, addr);
247         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
248 }
249
250 static void locked_reg_bfclr(struct enc28j60_net *priv,
251                                       u8 addr, u8 mask)
252 {
253         mutex_lock(&priv->lock);
254         nolock_reg_bfclr(priv, addr, mask);
255         mutex_unlock(&priv->lock);
256 }
257
258 /*
259  * Register byte read
260  */
261 static int nolock_regb_read(struct enc28j60_net *priv,
262                                      u8 address)
263 {
264         enc28j60_set_bank(priv, address);
265         return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
266 }
267
268 static int locked_regb_read(struct enc28j60_net *priv,
269                                      u8 address)
270 {
271         int ret;
272
273         mutex_lock(&priv->lock);
274         ret = nolock_regb_read(priv, address);
275         mutex_unlock(&priv->lock);
276
277         return ret;
278 }
279
280 /*
281  * Register word read
282  */
283 static int nolock_regw_read(struct enc28j60_net *priv,
284                                      u8 address)
285 {
286         int rl, rh;
287
288         enc28j60_set_bank(priv, address);
289         rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
290         rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
291
292         return (rh << 8) | rl;
293 }
294
295 static int locked_regw_read(struct enc28j60_net *priv,
296                                      u8 address)
297 {
298         int ret;
299
300         mutex_lock(&priv->lock);
301         ret = nolock_regw_read(priv, address);
302         mutex_unlock(&priv->lock);
303
304         return ret;
305 }
306
307 /*
308  * Register byte write
309  */
310 static void nolock_regb_write(struct enc28j60_net *priv,
311                                        u8 address, u8 data)
312 {
313         enc28j60_set_bank(priv, address);
314         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
315 }
316
317 static void locked_regb_write(struct enc28j60_net *priv,
318                                        u8 address, u8 data)
319 {
320         mutex_lock(&priv->lock);
321         nolock_regb_write(priv, address, data);
322         mutex_unlock(&priv->lock);
323 }
324
325 /*
326  * Register word write
327  */
328 static void nolock_regw_write(struct enc28j60_net *priv,
329                                        u8 address, u16 data)
330 {
331         enc28j60_set_bank(priv, address);
332         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
333         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
334                      (u8) (data >> 8));
335 }
336
337 static void locked_regw_write(struct enc28j60_net *priv,
338                                        u8 address, u16 data)
339 {
340         mutex_lock(&priv->lock);
341         nolock_regw_write(priv, address, data);
342         mutex_unlock(&priv->lock);
343 }
344
345 /*
346  * Buffer memory read
347  * Select the starting address and execute a SPI buffer read
348  */
349 static void enc28j60_mem_read(struct enc28j60_net *priv,
350                                      u16 addr, int len, u8 *data)
351 {
352         mutex_lock(&priv->lock);
353         nolock_regw_write(priv, ERDPTL, addr);
354 #ifdef CONFIG_ENC28J60_WRITEVERIFY
355         if (netif_msg_drv(priv)) {
356                 u16 reg;
357                 reg = nolock_regw_read(priv, ERDPTL);
358                 if (reg != addr)
359                         printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
360                                 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
361         }
362 #endif
363         spi_read_buf(priv, len, data);
364         mutex_unlock(&priv->lock);
365 }
366
367 /*
368  * Write packet to enc28j60 TX buffer memory
369  */
370 static void
371 enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
372 {
373         mutex_lock(&priv->lock);
374         /* Set the write pointer to start of transmit buffer area */
375         nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
376 #ifdef CONFIG_ENC28J60_WRITEVERIFY
377         if (netif_msg_drv(priv)) {
378                 u16 reg;
379                 reg = nolock_regw_read(priv, EWRPTL);
380                 if (reg != TXSTART_INIT)
381                         printk(KERN_DEBUG DRV_NAME
382                                 ": %s() ERWPT:0x%04x != 0x%04x\n",
383                                 __func__, reg, TXSTART_INIT);
384         }
385 #endif
386         /* Set the TXND pointer to correspond to the packet size given */
387         nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
388         /* write per-packet control byte */
389         spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
390         if (netif_msg_hw(priv))
391                 printk(KERN_DEBUG DRV_NAME
392                         ": %s() after control byte ERWPT:0x%04x\n",
393                         __func__, nolock_regw_read(priv, EWRPTL));
394         /* copy the packet into the transmit buffer */
395         spi_write_buf(priv, len, data);
396         if (netif_msg_hw(priv))
397                 printk(KERN_DEBUG DRV_NAME
398                          ": %s() after write packet ERWPT:0x%04x, len=%d\n",
399                          __func__, nolock_regw_read(priv, EWRPTL), len);
400         mutex_unlock(&priv->lock);
401 }
402
403 static unsigned long msec20_to_jiffies;
404
405 static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
406 {
407         unsigned long timeout = jiffies + msec20_to_jiffies;
408
409         /* 20 msec timeout read */
410         while ((nolock_regb_read(priv, reg) & mask) != val) {
411                 if (time_after(jiffies, timeout)) {
412                         if (netif_msg_drv(priv))
413                                 dev_dbg(&priv->spi->dev,
414                                         "reg %02x ready timeout!\n", reg);
415                         return -ETIMEDOUT;
416                 }
417                 cpu_relax();
418         }
419         return 0;
420 }
421
422 /*
423  * Wait until the PHY operation is complete.
424  */
425 static int wait_phy_ready(struct enc28j60_net *priv)
426 {
427         return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
428 }
429
430 /*
431  * PHY register read
432  * PHY registers are not accessed directly, but through the MII
433  */
434 static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
435 {
436         u16 ret;
437
438         mutex_lock(&priv->lock);
439         /* set the PHY register address */
440         nolock_regb_write(priv, MIREGADR, address);
441         /* start the register read operation */
442         nolock_regb_write(priv, MICMD, MICMD_MIIRD);
443         /* wait until the PHY read completes */
444         wait_phy_ready(priv);
445         /* quit reading */
446         nolock_regb_write(priv, MICMD, 0x00);
447         /* return the data */
448         ret  = nolock_regw_read(priv, MIRDL);
449         mutex_unlock(&priv->lock);
450
451         return ret;
452 }
453
454 static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
455 {
456         int ret;
457
458         mutex_lock(&priv->lock);
459         /* set the PHY register address */
460         nolock_regb_write(priv, MIREGADR, address);
461         /* write the PHY data */
462         nolock_regw_write(priv, MIWRL, data);
463         /* wait until the PHY write completes and return */
464         ret = wait_phy_ready(priv);
465         mutex_unlock(&priv->lock);
466
467         return ret;
468 }
469
470 /*
471  * Program the hardware MAC address from dev->dev_addr.
472  */
473 static int enc28j60_set_hw_macaddr(struct net_device *ndev)
474 {
475         int ret;
476         struct enc28j60_net *priv = netdev_priv(ndev);
477
478         mutex_lock(&priv->lock);
479         if (!priv->hw_enable) {
480                 if (netif_msg_drv(priv))
481                         printk(KERN_INFO DRV_NAME
482                                 ": %s: Setting MAC address to %pM\n",
483                                 ndev->name, ndev->dev_addr);
484                 /* NOTE: MAC address in ENC28J60 is byte-backward */
485                 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
486                 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
487                 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
488                 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
489                 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
490                 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
491                 ret = 0;
492         } else {
493                 if (netif_msg_drv(priv))
494                         printk(KERN_DEBUG DRV_NAME
495                                 ": %s() Hardware must be disabled to set "
496                                 "Mac address\n", __func__);
497                 ret = -EBUSY;
498         }
499         mutex_unlock(&priv->lock);
500         return ret;
501 }
502
503 /*
504  * Store the new hardware address in dev->dev_addr, and update the MAC.
505  */
506 static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
507 {
508         struct sockaddr *address = addr;
509
510         if (netif_running(dev))
511                 return -EBUSY;
512         if (!is_valid_ether_addr(address->sa_data))
513                 return -EADDRNOTAVAIL;
514
515         memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
516         return enc28j60_set_hw_macaddr(dev);
517 }
518
519 /*
520  * Debug routine to dump useful register contents
521  */
522 static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
523 {
524         mutex_lock(&priv->lock);
525         printk(KERN_DEBUG DRV_NAME " %s\n"
526                 "HwRevID: 0x%02x\n"
527                 "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
528                 "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
529                 "MAC  : MACON1 MACON3 MACON4\n"
530                 "       0x%02x   0x%02x   0x%02x\n"
531                 "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
532                 "       0x%04x 0x%04x 0x%04x  0x%04x  "
533                 "0x%02x    0x%02x    0x%04x\n"
534                 "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
535                 "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
536                 msg, nolock_regb_read(priv, EREVID),
537                 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
538                 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
539                 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
540                 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
541                 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
542                 nolock_regw_read(priv, ERXWRPTL),
543                 nolock_regw_read(priv, ERXRDPTL),
544                 nolock_regb_read(priv, ERXFCON),
545                 nolock_regb_read(priv, EPKTCNT),
546                 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
547                 nolock_regw_read(priv, ETXNDL),
548                 nolock_regb_read(priv, MACLCON1),
549                 nolock_regb_read(priv, MACLCON2),
550                 nolock_regb_read(priv, MAPHSUP));
551         mutex_unlock(&priv->lock);
552 }
553
554 /*
555  * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
556  */
557 static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
558 {
559         u16 erxrdpt;
560
561         if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
562                 erxrdpt = end;
563         else
564                 erxrdpt = next_packet_ptr - 1;
565
566         return erxrdpt;
567 }
568
569 /*
570  * Calculate wrap around when reading beyond the end of the RX buffer
571  */
572 static u16 rx_packet_start(u16 ptr)
573 {
574         if (ptr + RSV_SIZE > RXEND_INIT)
575                 return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
576         else
577                 return ptr + RSV_SIZE;
578 }
579
580 static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
581 {
582         u16 erxrdpt;
583
584         if (start > 0x1FFF || end > 0x1FFF || start > end) {
585                 if (netif_msg_drv(priv))
586                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
587                                 "bad parameters!\n", __func__, start, end);
588                 return;
589         }
590         /* set receive buffer start + end */
591         priv->next_pk_ptr = start;
592         nolock_regw_write(priv, ERXSTL, start);
593         erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
594         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
595         nolock_regw_write(priv, ERXNDL, end);
596 }
597
598 static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
599 {
600         if (start > 0x1FFF || end > 0x1FFF || start > end) {
601                 if (netif_msg_drv(priv))
602                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
603                                 "bad parameters!\n", __func__, start, end);
604                 return;
605         }
606         /* set transmit buffer start + end */
607         nolock_regw_write(priv, ETXSTL, start);
608         nolock_regw_write(priv, ETXNDL, end);
609 }
610
611 /*
612  * Low power mode shrinks power consumption about 100x, so we'd like
613  * the chip to be in that mode whenever it's inactive.  (However, we
614  * can't stay in lowpower mode during suspend with WOL active.)
615  */
616 static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
617 {
618         if (netif_msg_drv(priv))
619                 dev_dbg(&priv->spi->dev, "%s power...\n",
620                                 is_low ? "low" : "high");
621
622         mutex_lock(&priv->lock);
623         if (is_low) {
624                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
625                 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
626                 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
627                 /* ECON2_VRPS was set during initialization */
628                 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
629         } else {
630                 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
631                 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
632                 /* caller sets ECON1_RXEN */
633         }
634         mutex_unlock(&priv->lock);
635 }
636
637 static int enc28j60_hw_init(struct enc28j60_net *priv)
638 {
639         u8 reg;
640
641         if (netif_msg_drv(priv))
642                 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
643                         priv->full_duplex ? "FullDuplex" : "HalfDuplex");
644
645         mutex_lock(&priv->lock);
646         /* first reset the chip */
647         enc28j60_soft_reset(priv);
648         /* Clear ECON1 */
649         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
650         priv->bank = 0;
651         priv->hw_enable = false;
652         priv->tx_retry_count = 0;
653         priv->max_pk_counter = 0;
654         priv->rxfilter = RXFILTER_NORMAL;
655         /* enable address auto increment and voltage regulator powersave */
656         nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
657
658         nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
659         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
660         mutex_unlock(&priv->lock);
661
662         /*
663          * Check the RevID.
664          * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
665          * damaged
666          */
667         reg = locked_regb_read(priv, EREVID);
668         if (netif_msg_drv(priv))
669                 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
670         if (reg == 0x00 || reg == 0xff) {
671                 if (netif_msg_drv(priv))
672                         printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
673                                 __func__, reg);
674                 return 0;
675         }
676
677         /* default filter mode: (unicast OR broadcast) AND crc valid */
678         locked_regb_write(priv, ERXFCON,
679                             ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
680
681         /* enable MAC receive */
682         locked_regb_write(priv, MACON1,
683                             MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
684         /* enable automatic padding and CRC operations */
685         if (priv->full_duplex) {
686                 locked_regb_write(priv, MACON3,
687                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
688                                     MACON3_FRMLNEN | MACON3_FULDPX);
689                 /* set inter-frame gap (non-back-to-back) */
690                 locked_regb_write(priv, MAIPGL, 0x12);
691                 /* set inter-frame gap (back-to-back) */
692                 locked_regb_write(priv, MABBIPG, 0x15);
693         } else {
694                 locked_regb_write(priv, MACON3,
695                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
696                                     MACON3_FRMLNEN);
697                 locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
698                 /* set inter-frame gap (non-back-to-back) */
699                 locked_regw_write(priv, MAIPGL, 0x0C12);
700                 /* set inter-frame gap (back-to-back) */
701                 locked_regb_write(priv, MABBIPG, 0x12);
702         }
703         /*
704          * MACLCON1 (default)
705          * MACLCON2 (default)
706          * Set the maximum packet size which the controller will accept
707          */
708         locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
709
710         /* Configure LEDs */
711         if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
712                 return 0;
713
714         if (priv->full_duplex) {
715                 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
716                         return 0;
717                 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
718                         return 0;
719         } else {
720                 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
721                         return 0;
722                 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
723                         return 0;
724         }
725         if (netif_msg_hw(priv))
726                 enc28j60_dump_regs(priv, "Hw initialized.");
727
728         return 1;
729 }
730
731 static void enc28j60_hw_enable(struct enc28j60_net *priv)
732 {
733         /* enable interrupts */
734         if (netif_msg_hw(priv))
735                 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
736                         __func__);
737
738         enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
739
740         mutex_lock(&priv->lock);
741         nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
742                          EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
743         nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
744                           EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
745
746         /* enable receive logic */
747         nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
748         priv->hw_enable = true;
749         mutex_unlock(&priv->lock);
750 }
751
752 static void enc28j60_hw_disable(struct enc28j60_net *priv)
753 {
754         mutex_lock(&priv->lock);
755         /* disable interrutps and packet reception */
756         nolock_regb_write(priv, EIE, 0x00);
757         nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
758         priv->hw_enable = false;
759         mutex_unlock(&priv->lock);
760 }
761
762 static int
763 enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
764 {
765         struct enc28j60_net *priv = netdev_priv(ndev);
766         int ret = 0;
767
768         if (!priv->hw_enable) {
769                 /* link is in low power mode now; duplex setting
770                  * will take effect on next enc28j60_hw_init().
771                  */
772                 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
773                         priv->full_duplex = (duplex == DUPLEX_FULL);
774                 else {
775                         if (netif_msg_link(priv))
776                                 dev_warn(&ndev->dev,
777                                         "unsupported link setting\n");
778                         ret = -EOPNOTSUPP;
779                 }
780         } else {
781                 if (netif_msg_link(priv))
782                         dev_warn(&ndev->dev, "Warning: hw must be disabled "
783                                 "to set link mode\n");
784                 ret = -EBUSY;
785         }
786         return ret;
787 }
788
789 /*
790  * Read the Transmit Status Vector
791  */
792 static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
793 {
794         int endptr;
795
796         endptr = locked_regw_read(priv, ETXNDL);
797         if (netif_msg_hw(priv))
798                 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
799                          endptr + 1);
800         enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
801 }
802
803 static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
804                                 u8 tsv[TSV_SIZE])
805 {
806         u16 tmp1, tmp2;
807
808         printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
809         tmp1 = tsv[1];
810         tmp1 <<= 8;
811         tmp1 |= tsv[0];
812
813         tmp2 = tsv[5];
814         tmp2 <<= 8;
815         tmp2 |= tsv[4];
816
817         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
818                 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
819         printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
820                 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
821                 TSV_GETBIT(tsv, TSV_TXCRCERROR),
822                 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
823                 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
824         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
825                 "PacketDefer: %d, ExDefer: %d\n",
826                 TSV_GETBIT(tsv, TSV_TXMULTICAST),
827                 TSV_GETBIT(tsv, TSV_TXBROADCAST),
828                 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
829                 TSV_GETBIT(tsv, TSV_TXEXDEFER));
830         printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
831                  "Giant: %d, Underrun: %d\n",
832                  TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
833                  TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
834                  TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
835         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
836                  "BackPressApp: %d, VLanTagFrame: %d\n",
837                  TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
838                  TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
839                  TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
840                  TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
841 }
842
843 /*
844  * Receive Status vector
845  */
846 static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
847                               u16 pk_ptr, int len, u16 sts)
848 {
849         printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
850                 msg, pk_ptr);
851         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
852                  RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
853         printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
854                  " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
855                  RSV_GETBIT(sts, RSV_CRCERROR),
856                  RSV_GETBIT(sts, RSV_LENCHECKERR),
857                  RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
858         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
859                  "LongDropEvent: %d, CarrierEvent: %d\n",
860                  RSV_GETBIT(sts, RSV_RXMULTICAST),
861                  RSV_GETBIT(sts, RSV_RXBROADCAST),
862                  RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
863                  RSV_GETBIT(sts, RSV_CARRIEREV));
864         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
865                  " UnknownOp: %d, VLanTagFrame: %d\n",
866                  RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
867                  RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
868                  RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
869                  RSV_GETBIT(sts, RSV_RXTYPEVLAN));
870 }
871
872 static void dump_packet(const char *msg, int len, const char *data)
873 {
874         printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
875         print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
876                         data, len, true);
877 }
878
879 /*
880  * Hardware receive function.
881  * Read the buffer memory, update the FIFO pointer to free the buffer,
882  * check the status vector and decrement the packet counter.
883  */
884 static void enc28j60_hw_rx(struct net_device *ndev)
885 {
886         struct enc28j60_net *priv = netdev_priv(ndev);
887         struct sk_buff *skb = NULL;
888         u16 erxrdpt, next_packet, rxstat;
889         u8 rsv[RSV_SIZE];
890         int len;
891
892         if (netif_msg_rx_status(priv))
893                 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
894                         priv->next_pk_ptr);
895
896         if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
897                 if (netif_msg_rx_err(priv))
898                         dev_err(&ndev->dev,
899                                 "%s() Invalid packet address!! 0x%04x\n",
900                                 __func__, priv->next_pk_ptr);
901                 /* packet address corrupted: reset RX logic */
902                 mutex_lock(&priv->lock);
903                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
904                 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
905                 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
906                 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
907                 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
908                 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
909                 mutex_unlock(&priv->lock);
910                 ndev->stats.rx_errors++;
911                 return;
912         }
913         /* Read next packet pointer and rx status vector */
914         enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
915
916         next_packet = rsv[1];
917         next_packet <<= 8;
918         next_packet |= rsv[0];
919
920         len = rsv[3];
921         len <<= 8;
922         len |= rsv[2];
923
924         rxstat = rsv[5];
925         rxstat <<= 8;
926         rxstat |= rsv[4];
927
928         if (netif_msg_rx_status(priv))
929                 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
930
931         if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
932                 if (netif_msg_rx_err(priv))
933                         dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
934                 ndev->stats.rx_errors++;
935                 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
936                         ndev->stats.rx_crc_errors++;
937                 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
938                         ndev->stats.rx_frame_errors++;
939         } else {
940                 skb = dev_alloc_skb(len + NET_IP_ALIGN);
941                 if (!skb) {
942                         if (netif_msg_rx_err(priv))
943                                 dev_err(&ndev->dev,
944                                         "out of memory for Rx'd frame\n");
945                         ndev->stats.rx_dropped++;
946                 } else {
947                         skb->dev = ndev;
948                         skb_reserve(skb, NET_IP_ALIGN);
949                         /* copy the packet from the receive buffer */
950                         enc28j60_mem_read(priv,
951                                 rx_packet_start(priv->next_pk_ptr),
952                                 len, skb_put(skb, len));
953                         if (netif_msg_pktdata(priv))
954                                 dump_packet(__func__, skb->len, skb->data);
955                         skb->protocol = eth_type_trans(skb, ndev);
956                         /* update statistics */
957                         ndev->stats.rx_packets++;
958                         ndev->stats.rx_bytes += len;
959                         netif_rx_ni(skb);
960                 }
961         }
962         /*
963          * Move the RX read pointer to the start of the next
964          * received packet.
965          * This frees the memory we just read out
966          */
967         erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
968         if (netif_msg_hw(priv))
969                 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
970                         __func__, erxrdpt);
971
972         mutex_lock(&priv->lock);
973         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
974 #ifdef CONFIG_ENC28J60_WRITEVERIFY
975         if (netif_msg_drv(priv)) {
976                 u16 reg;
977                 reg = nolock_regw_read(priv, ERXRDPTL);
978                 if (reg != erxrdpt)
979                         printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
980                                 "error (0x%04x - 0x%04x)\n", __func__,
981                                 reg, erxrdpt);
982         }
983 #endif
984         priv->next_pk_ptr = next_packet;
985         /* we are done with this packet, decrement the packet counter */
986         nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
987         mutex_unlock(&priv->lock);
988 }
989
990 /*
991  * Calculate free space in RxFIFO
992  */
993 static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
994 {
995         int epkcnt, erxst, erxnd, erxwr, erxrd;
996         int free_space;
997
998         mutex_lock(&priv->lock);
999         epkcnt = nolock_regb_read(priv, EPKTCNT);
1000         if (epkcnt >= 255)
1001                 free_space = -1;
1002         else {
1003                 erxst = nolock_regw_read(priv, ERXSTL);
1004                 erxnd = nolock_regw_read(priv, ERXNDL);
1005                 erxwr = nolock_regw_read(priv, ERXWRPTL);
1006                 erxrd = nolock_regw_read(priv, ERXRDPTL);
1007
1008                 if (erxwr > erxrd)
1009                         free_space = (erxnd - erxst) - (erxwr - erxrd);
1010                 else if (erxwr == erxrd)
1011                         free_space = (erxnd - erxst);
1012                 else
1013                         free_space = erxrd - erxwr - 1;
1014         }
1015         mutex_unlock(&priv->lock);
1016         if (netif_msg_rx_status(priv))
1017                 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1018                         __func__, free_space);
1019         return free_space;
1020 }
1021
1022 /*
1023  * Access the PHY to determine link status
1024  */
1025 static void enc28j60_check_link_status(struct net_device *ndev)
1026 {
1027         struct enc28j60_net *priv = netdev_priv(ndev);
1028         u16 reg;
1029         int duplex;
1030
1031         reg = enc28j60_phy_read(priv, PHSTAT2);
1032         if (netif_msg_hw(priv))
1033                 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1034                         "PHSTAT2: %04x\n", __func__,
1035                         enc28j60_phy_read(priv, PHSTAT1), reg);
1036         duplex = reg & PHSTAT2_DPXSTAT;
1037
1038         if (reg & PHSTAT2_LSTAT) {
1039                 netif_carrier_on(ndev);
1040                 if (netif_msg_ifup(priv))
1041                         dev_info(&ndev->dev, "link up - %s\n",
1042                                 duplex ? "Full duplex" : "Half duplex");
1043         } else {
1044                 if (netif_msg_ifdown(priv))
1045                         dev_info(&ndev->dev, "link down\n");
1046                 netif_carrier_off(ndev);
1047         }
1048 }
1049
1050 static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1051 {
1052         struct enc28j60_net *priv = netdev_priv(ndev);
1053
1054         if (err)
1055                 ndev->stats.tx_errors++;
1056         else
1057                 ndev->stats.tx_packets++;
1058
1059         if (priv->tx_skb) {
1060                 if (!err)
1061                         ndev->stats.tx_bytes += priv->tx_skb->len;
1062                 dev_kfree_skb(priv->tx_skb);
1063                 priv->tx_skb = NULL;
1064         }
1065         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1066         netif_wake_queue(ndev);
1067 }
1068
1069 /*
1070  * RX handler
1071  * ignore PKTIF because is unreliable! (look at the errata datasheet)
1072  * check EPKTCNT is the suggested workaround.
1073  * We don't need to clear interrupt flag, automatically done when
1074  * enc28j60_hw_rx() decrements the packet counter.
1075  * Returns how many packet processed.
1076  */
1077 static int enc28j60_rx_interrupt(struct net_device *ndev)
1078 {
1079         struct enc28j60_net *priv = netdev_priv(ndev);
1080         int pk_counter, ret;
1081
1082         pk_counter = locked_regb_read(priv, EPKTCNT);
1083         if (pk_counter && netif_msg_intr(priv))
1084                 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1085         if (pk_counter > priv->max_pk_counter) {
1086                 /* update statistics */
1087                 priv->max_pk_counter = pk_counter;
1088                 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1089                         printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1090                                 priv->max_pk_counter);
1091         }
1092         ret = pk_counter;
1093         while (pk_counter-- > 0)
1094                 enc28j60_hw_rx(ndev);
1095
1096         return ret;
1097 }
1098
1099 static void enc28j60_irq_work_handler(struct work_struct *work)
1100 {
1101         struct enc28j60_net *priv =
1102                 container_of(work, struct enc28j60_net, irq_work);
1103         struct net_device *ndev = priv->netdev;
1104         int intflags, loop;
1105
1106         if (netif_msg_intr(priv))
1107                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1108         /* disable further interrupts */
1109         locked_reg_bfclr(priv, EIE, EIE_INTIE);
1110
1111         do {
1112                 loop = 0;
1113                 intflags = locked_regb_read(priv, EIR);
1114                 /* DMA interrupt handler (not currently used) */
1115                 if ((intflags & EIR_DMAIF) != 0) {
1116                         loop++;
1117                         if (netif_msg_intr(priv))
1118                                 printk(KERN_DEBUG DRV_NAME
1119                                         ": intDMA(%d)\n", loop);
1120                         locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1121                 }
1122                 /* LINK changed handler */
1123                 if ((intflags & EIR_LINKIF) != 0) {
1124                         loop++;
1125                         if (netif_msg_intr(priv))
1126                                 printk(KERN_DEBUG DRV_NAME
1127                                         ": intLINK(%d)\n", loop);
1128                         enc28j60_check_link_status(ndev);
1129                         /* read PHIR to clear the flag */
1130                         enc28j60_phy_read(priv, PHIR);
1131                 }
1132                 /* TX complete handler */
1133                 if ((intflags & EIR_TXIF) != 0) {
1134                         bool err = false;
1135                         loop++;
1136                         if (netif_msg_intr(priv))
1137                                 printk(KERN_DEBUG DRV_NAME
1138                                         ": intTX(%d)\n", loop);
1139                         priv->tx_retry_count = 0;
1140                         if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1141                                 if (netif_msg_tx_err(priv))
1142                                         dev_err(&ndev->dev,
1143                                                 "Tx Error (aborted)\n");
1144                                 err = true;
1145                         }
1146                         if (netif_msg_tx_done(priv)) {
1147                                 u8 tsv[TSV_SIZE];
1148                                 enc28j60_read_tsv(priv, tsv);
1149                                 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1150                         }
1151                         enc28j60_tx_clear(ndev, err);
1152                         locked_reg_bfclr(priv, EIR, EIR_TXIF);
1153                 }
1154                 /* TX Error handler */
1155                 if ((intflags & EIR_TXERIF) != 0) {
1156                         u8 tsv[TSV_SIZE];
1157
1158                         loop++;
1159                         if (netif_msg_intr(priv))
1160                                 printk(KERN_DEBUG DRV_NAME
1161                                         ": intTXErr(%d)\n", loop);
1162                         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1163                         enc28j60_read_tsv(priv, tsv);
1164                         if (netif_msg_tx_err(priv))
1165                                 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1166                         /* Reset TX logic */
1167                         mutex_lock(&priv->lock);
1168                         nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1169                         nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1170                         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1171                         mutex_unlock(&priv->lock);
1172                         /* Transmit Late collision check for retransmit */
1173                         if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1174                                 if (netif_msg_tx_err(priv))
1175                                         printk(KERN_DEBUG DRV_NAME
1176                                                 ": LateCollision TXErr (%d)\n",
1177                                                 priv->tx_retry_count);
1178                                 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1179                                         locked_reg_bfset(priv, ECON1,
1180                                                            ECON1_TXRTS);
1181                                 else
1182                                         enc28j60_tx_clear(ndev, true);
1183                         } else
1184                                 enc28j60_tx_clear(ndev, true);
1185                         locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1186                 }
1187                 /* RX Error handler */
1188                 if ((intflags & EIR_RXERIF) != 0) {
1189                         loop++;
1190                         if (netif_msg_intr(priv))
1191                                 printk(KERN_DEBUG DRV_NAME
1192                                         ": intRXErr(%d)\n", loop);
1193                         /* Check free FIFO space to flag RX overrun */
1194                         if (enc28j60_get_free_rxfifo(priv) <= 0) {
1195                                 if (netif_msg_rx_err(priv))
1196                                         printk(KERN_DEBUG DRV_NAME
1197                                                 ": RX Overrun\n");
1198                                 ndev->stats.rx_dropped++;
1199                         }
1200                         locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1201                 }
1202                 /* RX handler */
1203                 if (enc28j60_rx_interrupt(ndev))
1204                         loop++;
1205         } while (loop);
1206
1207         /* re-enable interrupts */
1208         locked_reg_bfset(priv, EIE, EIE_INTIE);
1209         if (netif_msg_intr(priv))
1210                 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1211 }
1212
1213 /*
1214  * Hardware transmit function.
1215  * Fill the buffer memory and send the contents of the transmit buffer
1216  * onto the network
1217  */
1218 static void enc28j60_hw_tx(struct enc28j60_net *priv)
1219 {
1220         if (netif_msg_tx_queued(priv))
1221                 printk(KERN_DEBUG DRV_NAME
1222                         ": Tx Packet Len:%d\n", priv->tx_skb->len);
1223
1224         if (netif_msg_pktdata(priv))
1225                 dump_packet(__func__,
1226                             priv->tx_skb->len, priv->tx_skb->data);
1227         enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1228
1229 #ifdef CONFIG_ENC28J60_WRITEVERIFY
1230         /* readback and verify written data */
1231         if (netif_msg_drv(priv)) {
1232                 int test_len, k;
1233                 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1234                 int okflag;
1235
1236                 test_len = priv->tx_skb->len;
1237                 if (test_len > sizeof(test_buf))
1238                         test_len = sizeof(test_buf);
1239
1240                 /* + 1 to skip control byte */
1241                 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1242                 okflag = 1;
1243                 for (k = 0; k < test_len; k++) {
1244                         if (priv->tx_skb->data[k] != test_buf[k]) {
1245                                 printk(KERN_DEBUG DRV_NAME
1246                                          ": Error, %d location differ: "
1247                                          "0x%02x-0x%02x\n", k,
1248                                          priv->tx_skb->data[k], test_buf[k]);
1249                                 okflag = 0;
1250                         }
1251                 }
1252                 if (!okflag)
1253                         printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1254                                 "verify ERROR!\n");
1255         }
1256 #endif
1257         /* set TX request flag */
1258         locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1259 }
1260
1261 static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1262 {
1263         struct enc28j60_net *priv = netdev_priv(dev);
1264
1265         if (netif_msg_tx_queued(priv))
1266                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1267
1268         /* If some error occurs while trying to transmit this
1269          * packet, you should return '1' from this function.
1270          * In such a case you _may not_ do anything to the
1271          * SKB, it is still owned by the network queueing
1272          * layer when an error is returned.  This means you
1273          * may not modify any SKB fields, you may not free
1274          * the SKB, etc.
1275          */
1276         netif_stop_queue(dev);
1277
1278         /* save the timestamp */
1279         priv->netdev->trans_start = jiffies;
1280         /* Remember the skb for deferred processing */
1281         priv->tx_skb = skb;
1282         schedule_work(&priv->tx_work);
1283
1284         return 0;
1285 }
1286
1287 static void enc28j60_tx_work_handler(struct work_struct *work)
1288 {
1289         struct enc28j60_net *priv =
1290                 container_of(work, struct enc28j60_net, tx_work);
1291
1292         /* actual delivery of data */
1293         enc28j60_hw_tx(priv);
1294 }
1295
1296 static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1297 {
1298         struct enc28j60_net *priv = dev_id;
1299
1300         /*
1301          * Can't do anything in interrupt context because we need to
1302          * block (spi_sync() is blocking) so fire of the interrupt
1303          * handling workqueue.
1304          * Remember that we access enc28j60 registers through SPI bus
1305          * via spi_sync() call.
1306          */
1307         schedule_work(&priv->irq_work);
1308
1309         return IRQ_HANDLED;
1310 }
1311
1312 static void enc28j60_tx_timeout(struct net_device *ndev)
1313 {
1314         struct enc28j60_net *priv = netdev_priv(ndev);
1315
1316         if (netif_msg_timer(priv))
1317                 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1318
1319         ndev->stats.tx_errors++;
1320         /* can't restart safely under softirq */
1321         schedule_work(&priv->restart_work);
1322 }
1323
1324 /*
1325  * Open/initialize the board. This is called (in the current kernel)
1326  * sometime after booting when the 'ifconfig' program is run.
1327  *
1328  * This routine should set everything up anew at each open, even
1329  * registers that "should" only need to be set once at boot, so that
1330  * there is non-reboot way to recover if something goes wrong.
1331  */
1332 static int enc28j60_net_open(struct net_device *dev)
1333 {
1334         struct enc28j60_net *priv = netdev_priv(dev);
1335
1336         if (netif_msg_drv(priv))
1337                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1338
1339         if (!is_valid_ether_addr(dev->dev_addr)) {
1340                 if (netif_msg_ifup(priv))
1341                         dev_err(&dev->dev, "invalid MAC address %pM\n",
1342                                 dev->dev_addr);
1343                 return -EADDRNOTAVAIL;
1344         }
1345         /* Reset the hardware here (and take it out of low power mode) */
1346         enc28j60_lowpower(priv, false);
1347         enc28j60_hw_disable(priv);
1348         if (!enc28j60_hw_init(priv)) {
1349                 if (netif_msg_ifup(priv))
1350                         dev_err(&dev->dev, "hw_reset() failed\n");
1351                 return -EINVAL;
1352         }
1353         /* Update the MAC address (in case user has changed it) */
1354         enc28j60_set_hw_macaddr(dev);
1355         /* Enable interrupts */
1356         enc28j60_hw_enable(priv);
1357         /* check link status */
1358         enc28j60_check_link_status(dev);
1359         /* We are now ready to accept transmit requests from
1360          * the queueing layer of the networking.
1361          */
1362         netif_start_queue(dev);
1363
1364         return 0;
1365 }
1366
1367 /* The inverse routine to net_open(). */
1368 static int enc28j60_net_close(struct net_device *dev)
1369 {
1370         struct enc28j60_net *priv = netdev_priv(dev);
1371
1372         if (netif_msg_drv(priv))
1373                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1374
1375         enc28j60_hw_disable(priv);
1376         enc28j60_lowpower(priv, true);
1377         netif_stop_queue(dev);
1378
1379         return 0;
1380 }
1381
1382 /*
1383  * Set or clear the multicast filter for this adapter
1384  * num_addrs == -1      Promiscuous mode, receive all packets
1385  * num_addrs == 0       Normal mode, filter out multicast packets
1386  * num_addrs > 0        Multicast mode, receive normal and MC packets
1387  */
1388 static void enc28j60_set_multicast_list(struct net_device *dev)
1389 {
1390         struct enc28j60_net *priv = netdev_priv(dev);
1391         int oldfilter = priv->rxfilter;
1392
1393         if (dev->flags & IFF_PROMISC) {
1394                 if (netif_msg_link(priv))
1395                         dev_info(&dev->dev, "promiscuous mode\n");
1396                 priv->rxfilter = RXFILTER_PROMISC;
1397         } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1398                 if (netif_msg_link(priv))
1399                         dev_info(&dev->dev, "%smulticast mode\n",
1400                                 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1401                 priv->rxfilter = RXFILTER_MULTI;
1402         } else {
1403                 if (netif_msg_link(priv))
1404                         dev_info(&dev->dev, "normal mode\n");
1405                 priv->rxfilter = RXFILTER_NORMAL;
1406         }
1407
1408         if (oldfilter != priv->rxfilter)
1409                 schedule_work(&priv->setrx_work);
1410 }
1411
1412 static void enc28j60_setrx_work_handler(struct work_struct *work)
1413 {
1414         struct enc28j60_net *priv =
1415                 container_of(work, struct enc28j60_net, setrx_work);
1416
1417         if (priv->rxfilter == RXFILTER_PROMISC) {
1418                 if (netif_msg_drv(priv))
1419                         printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1420                 locked_regb_write(priv, ERXFCON, 0x00);
1421         } else if (priv->rxfilter == RXFILTER_MULTI) {
1422                 if (netif_msg_drv(priv))
1423                         printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1424                 locked_regb_write(priv, ERXFCON,
1425                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1426                                         ERXFCON_BCEN | ERXFCON_MCEN);
1427         } else {
1428                 if (netif_msg_drv(priv))
1429                         printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1430                 locked_regb_write(priv, ERXFCON,
1431                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1432                                         ERXFCON_BCEN);
1433         }
1434 }
1435
1436 static void enc28j60_restart_work_handler(struct work_struct *work)
1437 {
1438         struct enc28j60_net *priv =
1439                         container_of(work, struct enc28j60_net, restart_work);
1440         struct net_device *ndev = priv->netdev;
1441         int ret;
1442
1443         rtnl_lock();
1444         if (netif_running(ndev)) {
1445                 enc28j60_net_close(ndev);
1446                 ret = enc28j60_net_open(ndev);
1447                 if (unlikely(ret)) {
1448                         dev_info(&ndev->dev, " could not restart %d\n", ret);
1449                         dev_close(ndev);
1450                 }
1451         }
1452         rtnl_unlock();
1453 }
1454
1455 /* ......................... ETHTOOL SUPPORT ........................... */
1456
1457 static void
1458 enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1459 {
1460         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1461         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1462         strlcpy(info->bus_info,
1463                 dev_name(dev->dev.parent), sizeof(info->bus_info));
1464 }
1465
1466 static int
1467 enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1468 {
1469         struct enc28j60_net *priv = netdev_priv(dev);
1470
1471         cmd->transceiver = XCVR_INTERNAL;
1472         cmd->supported  = SUPPORTED_10baseT_Half
1473                         | SUPPORTED_10baseT_Full
1474                         | SUPPORTED_TP;
1475         cmd->speed      = SPEED_10;
1476         cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1477         cmd->port       = PORT_TP;
1478         cmd->autoneg    = AUTONEG_DISABLE;
1479
1480         return 0;
1481 }
1482
1483 static int
1484 enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1485 {
1486         return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1487 }
1488
1489 static u32 enc28j60_get_msglevel(struct net_device *dev)
1490 {
1491         struct enc28j60_net *priv = netdev_priv(dev);
1492         return priv->msg_enable;
1493 }
1494
1495 static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1496 {
1497         struct enc28j60_net *priv = netdev_priv(dev);
1498         priv->msg_enable = val;
1499 }
1500
1501 static const struct ethtool_ops enc28j60_ethtool_ops = {
1502         .get_settings   = enc28j60_get_settings,
1503         .set_settings   = enc28j60_set_settings,
1504         .get_drvinfo    = enc28j60_get_drvinfo,
1505         .get_msglevel   = enc28j60_get_msglevel,
1506         .set_msglevel   = enc28j60_set_msglevel,
1507 };
1508
1509 static int enc28j60_chipset_init(struct net_device *dev)
1510 {
1511         struct enc28j60_net *priv = netdev_priv(dev);
1512
1513         return enc28j60_hw_init(priv);
1514 }
1515
1516 static int __devinit enc28j60_probe(struct spi_device *spi)
1517 {
1518         struct net_device *dev;
1519         struct enc28j60_net *priv;
1520         int ret = 0;
1521
1522         if (netif_msg_drv(&debug))
1523                 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1524                         DRV_VERSION);
1525
1526         dev = alloc_etherdev(sizeof(struct enc28j60_net));
1527         if (!dev) {
1528                 if (netif_msg_drv(&debug))
1529                         dev_err(&spi->dev, DRV_NAME
1530                                 ": unable to alloc new ethernet\n");
1531                 ret = -ENOMEM;
1532                 goto error_alloc;
1533         }
1534         priv = netdev_priv(dev);
1535
1536         priv->netdev = dev;     /* priv to netdev reference */
1537         priv->spi = spi;        /* priv to spi reference */
1538         priv->msg_enable = netif_msg_init(debug.msg_enable,
1539                                                 ENC28J60_MSG_DEFAULT);
1540         mutex_init(&priv->lock);
1541         INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1542         INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1543         INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1544         INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1545         dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
1546         SET_NETDEV_DEV(dev, &spi->dev);
1547
1548         if (!enc28j60_chipset_init(dev)) {
1549                 if (netif_msg_probe(priv))
1550                         dev_info(&spi->dev, DRV_NAME " chip not found\n");
1551                 ret = -EIO;
1552                 goto error_irq;
1553         }
1554         random_ether_addr(dev->dev_addr);
1555         enc28j60_set_hw_macaddr(dev);
1556
1557         /* Board setup must set the relevant edge trigger type;
1558          * level triggers won't currently work.
1559          */
1560         ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1561         if (ret < 0) {
1562                 if (netif_msg_probe(priv))
1563                         dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1564                                 "(ret = %d)\n", spi->irq, ret);
1565                 goto error_irq;
1566         }
1567
1568         dev->if_port = IF_PORT_10BASET;
1569         dev->irq = spi->irq;
1570         dev->open = enc28j60_net_open;
1571         dev->stop = enc28j60_net_close;
1572         dev->hard_start_xmit = enc28j60_send_packet;
1573         dev->set_multicast_list = &enc28j60_set_multicast_list;
1574         dev->set_mac_address = enc28j60_set_mac_address;
1575         dev->tx_timeout = &enc28j60_tx_timeout;
1576         dev->watchdog_timeo = TX_TIMEOUT;
1577         SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1578
1579         enc28j60_lowpower(priv, true);
1580
1581         ret = register_netdev(dev);
1582         if (ret) {
1583                 if (netif_msg_probe(priv))
1584                         dev_err(&spi->dev, "register netdev " DRV_NAME
1585                                 " failed (ret = %d)\n", ret);
1586                 goto error_register;
1587         }
1588         dev_info(&dev->dev, DRV_NAME " driver registered\n");
1589
1590         return 0;
1591
1592 error_register:
1593         free_irq(spi->irq, priv);
1594 error_irq:
1595         free_netdev(dev);
1596 error_alloc:
1597         return ret;
1598 }
1599
1600 static int __devexit enc28j60_remove(struct spi_device *spi)
1601 {
1602         struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1603
1604         if (netif_msg_drv(priv))
1605                 printk(KERN_DEBUG DRV_NAME ": remove\n");
1606
1607         unregister_netdev(priv->netdev);
1608         free_irq(spi->irq, priv);
1609         free_netdev(priv->netdev);
1610
1611         return 0;
1612 }
1613
1614 static struct spi_driver enc28j60_driver = {
1615         .driver = {
1616                    .name = DRV_NAME,
1617                    .owner = THIS_MODULE,
1618          },
1619         .probe = enc28j60_probe,
1620         .remove = __devexit_p(enc28j60_remove),
1621 };
1622
1623 static int __init enc28j60_init(void)
1624 {
1625         msec20_to_jiffies = msecs_to_jiffies(20);
1626
1627         return spi_register_driver(&enc28j60_driver);
1628 }
1629
1630 module_init(enc28j60_init);
1631
1632 static void __exit enc28j60_exit(void)
1633 {
1634         spi_unregister_driver(&enc28j60_driver);
1635 }
1636
1637 module_exit(enc28j60_exit);
1638
1639 MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1640 MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1641 MODULE_LICENSE("GPL");
1642 module_param_named(debug, debug.msg_enable, int, 0);
1643 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");