[SCSI] mpt fusion: don't oops if NumPhys==0
[linux-2.6.git] / drivers / message / fusion / mptsas.c
1 /*
2  *  linux/drivers/message/fusion/mptsas.c
3  *      For use with LSI PCI chip/adapter(s)
4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
5  *
6  *  Copyright (c) 1999-2007 LSI Corporation
7  *  (mailto:DL-MPTFusionLinux@lsi.com)
8  */
9 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
10 /*
11     This program is free software; you can redistribute it and/or modify
12     it under the terms of the GNU General Public License as published by
13     the Free Software Foundation; version 2 of the License.
14
15     This program is distributed in the hope that it will be useful,
16     but WITHOUT ANY WARRANTY; without even the implied warranty of
17     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18     GNU General Public License for more details.
19
20     NO WARRANTY
21     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25     solely responsible for determining the appropriateness of using and
26     distributing the Program and assumes all risks associated with its
27     exercise of rights under this Agreement, including but not limited to
28     the risks and costs of program errors, damage to or loss of data,
29     programs or equipment, and unavailability or interruption of operations.
30
31     DISCLAIMER OF LIABILITY
32     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40     You should have received a copy of the GNU General Public License
41     along with this program; if not, write to the Free Software
42     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
43 */
44 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
45
46 #include <linux/module.h>
47 #include <linux/kernel.h>
48 #include <linux/init.h>
49 #include <linux/errno.h>
50 #include <linux/jiffies.h>
51 #include <linux/workqueue.h>
52 #include <linux/delay.h>        /* for mdelay */
53
54 #include <scsi/scsi.h>
55 #include <scsi/scsi_cmnd.h>
56 #include <scsi/scsi_device.h>
57 #include <scsi/scsi_host.h>
58 #include <scsi/scsi_transport_sas.h>
59 #include <scsi/scsi_dbg.h>
60
61 #include "mptbase.h"
62 #include "mptscsih.h"
63 #include "mptsas.h"
64
65
66 #define my_NAME         "Fusion MPT SAS Host driver"
67 #define my_VERSION      MPT_LINUX_VERSION_COMMON
68 #define MYNAM           "mptsas"
69
70 /*
71  * Reserved channel for integrated raid
72  */
73 #define MPTSAS_RAID_CHANNEL     1
74
75 MODULE_AUTHOR(MODULEAUTHOR);
76 MODULE_DESCRIPTION(my_NAME);
77 MODULE_LICENSE("GPL");
78 MODULE_VERSION(my_VERSION);
79
80 static int mpt_pt_clear;
81 module_param(mpt_pt_clear, int, 0);
82 MODULE_PARM_DESC(mpt_pt_clear,
83                 " Clear persistency table: enable=1  "
84                 "(default=MPTSCSIH_PT_CLEAR=0)");
85
86 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
87 #define MPTSAS_MAX_LUN (16895)
88 static int max_lun = MPTSAS_MAX_LUN;
89 module_param(max_lun, int, 0);
90 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
91
92 static u8       mptsasDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
93 static u8       mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
94 static u8       mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
95 static u8       mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
96
97 static void mptsas_hotplug_work(struct work_struct *work);
98
99 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
100                                         MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
101 {
102         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
103             "---- IO UNIT PAGE 0 ------------\n", ioc->name));
104         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
105             ioc->name, le16_to_cpu(phy_data->AttachedDeviceHandle)));
106         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n",
107             ioc->name, le16_to_cpu(phy_data->ControllerDevHandle)));
108         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n",
109             ioc->name, phy_data->Port));
110         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n",
111             ioc->name, phy_data->PortFlags));
112         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n",
113             ioc->name, phy_data->PhyFlags));
114         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
115             ioc->name, phy_data->NegotiatedLinkRate));
116         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
117             "Controller PHY Device Info=0x%X\n", ioc->name,
118             le32_to_cpu(phy_data->ControllerPhyDeviceInfo)));
119         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n",
120             ioc->name, le32_to_cpu(phy_data->DiscoveryStatus)));
121 }
122
123 static void mptsas_print_phy_pg0(MPT_ADAPTER *ioc, SasPhyPage0_t *pg0)
124 {
125         __le64 sas_address;
126
127         memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
128
129         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
130             "---- SAS PHY PAGE 0 ------------\n", ioc->name));
131         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
132             "Attached Device Handle=0x%X\n", ioc->name,
133             le16_to_cpu(pg0->AttachedDevHandle)));
134         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
135             ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
136         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
137             "Attached PHY Identifier=0x%X\n", ioc->name,
138             pg0->AttachedPhyIdentifier));
139         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n",
140             ioc->name, le32_to_cpu(pg0->AttachedDeviceInfo)));
141         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
142             ioc->name,  pg0->ProgrammedLinkRate));
143         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n",
144             ioc->name, pg0->ChangeCount));
145         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n",
146             ioc->name, le32_to_cpu(pg0->PhyInfo)));
147 }
148
149 static void mptsas_print_phy_pg1(MPT_ADAPTER *ioc, SasPhyPage1_t *pg1)
150 {
151         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
152             "---- SAS PHY PAGE 1 ------------\n", ioc->name));
153         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n",
154             ioc->name,  pg1->InvalidDwordCount));
155         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
156             "Running Disparity Error Count=0x%x\n", ioc->name,
157             pg1->RunningDisparityErrorCount));
158         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
159             "Loss Dword Synch Count=0x%x\n", ioc->name,
160             pg1->LossDwordSynchCount));
161         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
162             "PHY Reset Problem Count=0x%x\n\n", ioc->name,
163             pg1->PhyResetProblemCount));
164 }
165
166 static void mptsas_print_device_pg0(MPT_ADAPTER *ioc, SasDevicePage0_t *pg0)
167 {
168         __le64 sas_address;
169
170         memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
171
172         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
173             "---- SAS DEVICE PAGE 0 ---------\n", ioc->name));
174         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
175             ioc->name, le16_to_cpu(pg0->DevHandle)));
176         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n",
177             ioc->name, le16_to_cpu(pg0->ParentDevHandle)));
178         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n",
179             ioc->name, le16_to_cpu(pg0->EnclosureHandle)));
180         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n",
181             ioc->name, le16_to_cpu(pg0->Slot)));
182         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
183             ioc->name, (unsigned long long)le64_to_cpu(sas_address)));
184         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n",
185             ioc->name, pg0->TargetID));
186         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n",
187             ioc->name, pg0->Bus));
188         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n",
189             ioc->name, pg0->PhyNum));
190         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n",
191             ioc->name, le16_to_cpu(pg0->AccessStatus)));
192         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n",
193             ioc->name, le32_to_cpu(pg0->DeviceInfo)));
194         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n",
195             ioc->name, le16_to_cpu(pg0->Flags)));
196         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n",
197             ioc->name, pg0->PhysicalPort));
198 }
199
200 static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
201 {
202         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
203             "---- SAS EXPANDER PAGE 1 ------------\n", ioc->name));
204         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n",
205             ioc->name, pg1->PhysicalPort));
206         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n",
207             ioc->name, pg1->PhyIdentifier));
208         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
209             ioc->name, pg1->NegotiatedLinkRate));
210         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
211             ioc->name, pg1->ProgrammedLinkRate));
212         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n",
213             ioc->name, pg1->HwLinkRate));
214         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n",
215             ioc->name, le16_to_cpu(pg1->OwnerDevHandle)));
216         dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
217             "Attached Device Handle=0x%X\n\n", ioc->name,
218             le16_to_cpu(pg1->AttachedDevHandle)));
219 }
220
221 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
222 {
223         struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
224         return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
225 }
226
227 static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
228 {
229         struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
230         return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
231 }
232
233 /*
234  * mptsas_find_portinfo_by_handle
235  *
236  * This function should be called with the sas_topology_mutex already held
237  */
238 static struct mptsas_portinfo *
239 mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
240 {
241         struct mptsas_portinfo *port_info, *rc=NULL;
242         int i;
243
244         list_for_each_entry(port_info, &ioc->sas_topology, list)
245                 for (i = 0; i < port_info->num_phys; i++)
246                         if (port_info->phy_info[i].identify.handle == handle) {
247                                 rc = port_info;
248                                 goto out;
249                         }
250  out:
251         return rc;
252 }
253
254 /*
255  * Returns true if there is a scsi end device
256  */
257 static inline int
258 mptsas_is_end_device(struct mptsas_devinfo * attached)
259 {
260         if ((attached->sas_address) &&
261             (attached->device_info &
262             MPI_SAS_DEVICE_INFO_END_DEVICE) &&
263             ((attached->device_info &
264             MPI_SAS_DEVICE_INFO_SSP_TARGET) |
265             (attached->device_info &
266             MPI_SAS_DEVICE_INFO_STP_TARGET) |
267             (attached->device_info &
268             MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
269                 return 1;
270         else
271                 return 0;
272 }
273
274 /* no mutex */
275 static void
276 mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_details)
277 {
278         struct mptsas_portinfo *port_info;
279         struct mptsas_phyinfo *phy_info;
280         u8      i;
281
282         if (!port_details)
283                 return;
284
285         port_info = port_details->port_info;
286         phy_info = port_info->phy_info;
287
288         dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
289             "bitmask=0x%016llX\n", ioc->name, __FUNCTION__, port_details,
290             port_details->num_phys, (unsigned long long)
291             port_details->phy_bitmask));
292
293         for (i = 0; i < port_info->num_phys; i++, phy_info++) {
294                 if(phy_info->port_details != port_details)
295                         continue;
296                 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
297                 phy_info->port_details = NULL;
298         }
299         kfree(port_details);
300 }
301
302 static inline struct sas_rphy *
303 mptsas_get_rphy(struct mptsas_phyinfo *phy_info)
304 {
305         if (phy_info->port_details)
306                 return phy_info->port_details->rphy;
307         else
308                 return NULL;
309 }
310
311 static inline void
312 mptsas_set_rphy(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy)
313 {
314         if (phy_info->port_details) {
315                 phy_info->port_details->rphy = rphy;
316                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n",
317                     ioc->name, rphy));
318         }
319
320         if (rphy) {
321                 dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
322                     &rphy->dev, MYIOC_s_FMT "add:", ioc->name));
323                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n",
324                     ioc->name, rphy, rphy->dev.release));
325         }
326 }
327
328 static inline struct sas_port *
329 mptsas_get_port(struct mptsas_phyinfo *phy_info)
330 {
331         if (phy_info->port_details)
332                 return phy_info->port_details->port;
333         else
334                 return NULL;
335 }
336
337 static inline void
338 mptsas_set_port(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, struct sas_port *port)
339 {
340         if (phy_info->port_details)
341                 phy_info->port_details->port = port;
342
343         if (port) {
344                 dsaswideprintk(ioc, dev_printk(KERN_DEBUG,
345                     &port->dev, MYIOC_s_FMT "add:", ioc->name));
346                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n",
347                     ioc->name, port, port->dev.release));
348         }
349 }
350
351 static inline struct scsi_target *
352 mptsas_get_starget(struct mptsas_phyinfo *phy_info)
353 {
354         if (phy_info->port_details)
355                 return phy_info->port_details->starget;
356         else
357                 return NULL;
358 }
359
360 static inline void
361 mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target *
362 starget)
363 {
364         if (phy_info->port_details)
365                 phy_info->port_details->starget = starget;
366 }
367
368
369 /*
370  * mptsas_setup_wide_ports
371  *
372  * Updates for new and existing narrow/wide port configuration
373  * in the sas_topology
374  */
375 static void
376 mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
377 {
378         struct mptsas_portinfo_details * port_details;
379         struct mptsas_phyinfo *phy_info, *phy_info_cmp;
380         u64     sas_address;
381         int     i, j;
382
383         mutex_lock(&ioc->sas_topology_mutex);
384
385         phy_info = port_info->phy_info;
386         for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
387                 if (phy_info->attached.handle)
388                         continue;
389                 port_details = phy_info->port_details;
390                 if (!port_details)
391                         continue;
392                 if (port_details->num_phys < 2)
393                         continue;
394                 /*
395                  * Removing a phy from a port, letting the last
396                  * phy be removed by firmware events.
397                  */
398                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
399                     "%s: [%p]: deleting phy = %d\n",
400                     ioc->name, __FUNCTION__, port_details, i));
401                 port_details->num_phys--;
402                 port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
403                 memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
404                 sas_port_delete_phy(port_details->port, phy_info->phy);
405                 phy_info->port_details = NULL;
406         }
407
408         /*
409          * Populate and refresh the tree
410          */
411         phy_info = port_info->phy_info;
412         for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
413                 sas_address = phy_info->attached.sas_address;
414                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n",
415                     ioc->name, i, (unsigned long long)sas_address));
416                 if (!sas_address)
417                         continue;
418                 port_details = phy_info->port_details;
419                 /*
420                  * Forming a port
421                  */
422                 if (!port_details) {
423                         port_details = kzalloc(sizeof(*port_details),
424                                 GFP_KERNEL);
425                         if (!port_details)
426                                 goto out;
427                         port_details->num_phys = 1;
428                         port_details->port_info = port_info;
429                         if (phy_info->phy_id < 64 )
430                                 port_details->phy_bitmask |=
431                                     (1 << phy_info->phy_id);
432                         phy_info->sas_port_add_phy=1;
433                         dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t"
434                             "phy_id=%d sas_address=0x%018llX\n",
435                             ioc->name, i, (unsigned long long)sas_address));
436                         phy_info->port_details = port_details;
437                 }
438
439                 if (i == port_info->num_phys - 1)
440                         continue;
441                 phy_info_cmp = &port_info->phy_info[i + 1];
442                 for (j = i + 1 ; j < port_info->num_phys ; j++,
443                     phy_info_cmp++) {
444                         if (!phy_info_cmp->attached.sas_address)
445                                 continue;
446                         if (sas_address != phy_info_cmp->attached.sas_address)
447                                 continue;
448                         if (phy_info_cmp->port_details == port_details )
449                                 continue;
450                         dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
451                             "\t\tphy_id=%d sas_address=0x%018llX\n",
452                             ioc->name, j, (unsigned long long)
453                             phy_info_cmp->attached.sas_address));
454                         if (phy_info_cmp->port_details) {
455                                 port_details->rphy =
456                                     mptsas_get_rphy(phy_info_cmp);
457                                 port_details->port =
458                                     mptsas_get_port(phy_info_cmp);
459                                 port_details->starget =
460                                     mptsas_get_starget(phy_info_cmp);
461                                 port_details->num_phys =
462                                         phy_info_cmp->port_details->num_phys;
463                                 if (!phy_info_cmp->port_details->num_phys)
464                                         kfree(phy_info_cmp->port_details);
465                         } else
466                                 phy_info_cmp->sas_port_add_phy=1;
467                         /*
468                          * Adding a phy to a port
469                          */
470                         phy_info_cmp->port_details = port_details;
471                         if (phy_info_cmp->phy_id < 64 )
472                                 port_details->phy_bitmask |=
473                                 (1 << phy_info_cmp->phy_id);
474                         port_details->num_phys++;
475                 }
476         }
477
478  out:
479
480         for (i = 0; i < port_info->num_phys; i++) {
481                 port_details = port_info->phy_info[i].port_details;
482                 if (!port_details)
483                         continue;
484                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
485                     "%s: [%p]: phy_id=%02d num_phys=%02d "
486                     "bitmask=0x%016llX\n", ioc->name, __FUNCTION__,
487                     port_details, i, port_details->num_phys,
488                     (unsigned long long)port_details->phy_bitmask));
489                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
490                     ioc->name, port_details->port, port_details->rphy));
491         }
492         dsaswideprintk(ioc, printk("\n"));
493         mutex_unlock(&ioc->sas_topology_mutex);
494 }
495
496 /**
497  * csmisas_find_vtarget
498  *
499  * @ioc
500  * @volume_id
501  * @volume_bus
502  *
503  **/
504 static VirtTarget *
505 mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
506 {
507         struct scsi_device              *sdev;
508         VirtDevice                      *vdevice;
509         VirtTarget                      *vtarget = NULL;
510
511         shost_for_each_device(sdev, ioc->sh) {
512                 if ((vdevice = sdev->hostdata) == NULL)
513                         continue;
514                 if (vdevice->vtarget->id == id &&
515                     vdevice->vtarget->channel == channel)
516                         vtarget = vdevice->vtarget;
517         }
518         return vtarget;
519 }
520
521 /**
522  * mptsas_target_reset
523  *
524  * Issues TARGET_RESET to end device using handshaking method
525  *
526  * @ioc
527  * @channel
528  * @id
529  *
530  * Returns (1) success
531  *         (0) failure
532  *
533  **/
534 static int
535 mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
536 {
537         MPT_FRAME_HDR   *mf;
538         SCSITaskMgmt_t  *pScsiTm;
539
540         if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
541                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
542                     ioc->name,__FUNCTION__, __LINE__));
543                 return 0;
544         }
545
546         /* Format the Request
547          */
548         pScsiTm = (SCSITaskMgmt_t *) mf;
549         memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t));
550         pScsiTm->TargetID = id;
551         pScsiTm->Bus = channel;
552         pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
553         pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
554         pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
555
556         DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
557
558         mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
559
560         return 1;
561 }
562
563 /**
564  * mptsas_target_reset_queue
565  *
566  * Receive request for TARGET_RESET after recieving an firmware
567  * event NOT_RESPONDING_EVENT, then put command in link list
568  * and queue if task_queue already in use.
569  *
570  * @ioc
571  * @sas_event_data
572  *
573  **/
574 static void
575 mptsas_target_reset_queue(MPT_ADAPTER *ioc,
576     EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
577 {
578         MPT_SCSI_HOST   *hd = shost_priv(ioc->sh);
579         VirtTarget *vtarget = NULL;
580         struct mptsas_target_reset_event *target_reset_list;
581         u8              id, channel;
582
583         id = sas_event_data->TargetID;
584         channel = sas_event_data->Bus;
585
586         if (!(vtarget = mptsas_find_vtarget(ioc, channel, id)))
587                 return;
588
589         vtarget->deleted = 1; /* block IO */
590
591         target_reset_list = kzalloc(sizeof(*target_reset_list),
592             GFP_ATOMIC);
593         if (!target_reset_list) {
594                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
595                     ioc->name,__FUNCTION__, __LINE__));
596                 return;
597         }
598
599         memcpy(&target_reset_list->sas_event_data, sas_event_data,
600                 sizeof(*sas_event_data));
601         list_add_tail(&target_reset_list->list, &hd->target_reset_list);
602
603         if (hd->resetPending)
604                 return;
605
606         if (mptsas_target_reset(ioc, channel, id)) {
607                 target_reset_list->target_reset_issued = 1;
608                 hd->resetPending = 1;
609         }
610 }
611
612 /**
613  * mptsas_dev_reset_complete
614  *
615  * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
616  * enable work queue to finish off removing device from upper layers.
617  * then send next TARGET_RESET in the queue.
618  *
619  * @ioc
620  *
621  **/
622 static void
623 mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
624 {
625         MPT_SCSI_HOST   *hd = shost_priv(ioc->sh);
626         struct list_head *head = &hd->target_reset_list;
627         struct mptsas_target_reset_event *target_reset_list;
628         struct mptsas_hotplug_event *ev;
629         EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
630         u8              id, channel;
631         __le64          sas_address;
632
633         if (list_empty(head))
634                 return;
635
636         target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
637
638         sas_event_data = &target_reset_list->sas_event_data;
639         id = sas_event_data->TargetID;
640         channel = sas_event_data->Bus;
641         hd->resetPending = 0;
642
643         /*
644          * retry target reset
645          */
646         if (!target_reset_list->target_reset_issued) {
647                 if (mptsas_target_reset(ioc, channel, id)) {
648                         target_reset_list->target_reset_issued = 1;
649                         hd->resetPending = 1;
650                 }
651                 return;
652         }
653
654         /*
655          * enable work queue to remove device from upper layers
656          */
657         list_del(&target_reset_list->list);
658
659         ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
660         if (!ev) {
661                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
662                     ioc->name,__FUNCTION__, __LINE__));
663                 return;
664         }
665
666         INIT_WORK(&ev->work, mptsas_hotplug_work);
667         ev->ioc = ioc;
668         ev->handle = le16_to_cpu(sas_event_data->DevHandle);
669         ev->parent_handle =
670             le16_to_cpu(sas_event_data->ParentDevHandle);
671         ev->channel = channel;
672         ev->id =id;
673         ev->phy_id = sas_event_data->PhyNum;
674         memcpy(&sas_address, &sas_event_data->SASAddress,
675             sizeof(__le64));
676         ev->sas_address = le64_to_cpu(sas_address);
677         ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
678         ev->event_type = MPTSAS_DEL_DEVICE;
679         schedule_work(&ev->work);
680         kfree(target_reset_list);
681
682         /*
683          * issue target reset to next device in the queue
684          */
685
686         head = &hd->target_reset_list;
687         if (list_empty(head))
688                 return;
689
690         target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
691             list);
692
693         sas_event_data = &target_reset_list->sas_event_data;
694         id = sas_event_data->TargetID;
695         channel = sas_event_data->Bus;
696
697         if (mptsas_target_reset(ioc, channel, id)) {
698                 target_reset_list->target_reset_issued = 1;
699                 hd->resetPending = 1;
700         }
701 }
702
703 /**
704  * mptsas_taskmgmt_complete
705  *
706  * @ioc
707  * @mf
708  * @mr
709  *
710  **/
711 static int
712 mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
713 {
714         mptsas_dev_reset_complete(ioc);
715         return mptscsih_taskmgmt_complete(ioc, mf, mr);
716 }
717
718 /**
719  * mptscsih_ioc_reset
720  *
721  * @ioc
722  * @reset_phase
723  *
724  **/
725 static int
726 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
727 {
728         MPT_SCSI_HOST   *hd;
729         struct mptsas_target_reset_event *target_reset_list, *n;
730         int rc;
731
732         rc = mptscsih_ioc_reset(ioc, reset_phase);
733
734         if (ioc->bus_type != SAS)
735                 goto out;
736
737         if (reset_phase != MPT_IOC_POST_RESET)
738                 goto out;
739
740         if (!ioc->sh || !ioc->sh->hostdata)
741                 goto out;
742         hd = shost_priv(ioc->sh);
743         if (!hd->ioc)
744                 goto out;
745
746         if (list_empty(&hd->target_reset_list))
747                 goto out;
748
749         /* flush the target_reset_list */
750         list_for_each_entry_safe(target_reset_list, n,
751             &hd->target_reset_list, list) {
752                 list_del(&target_reset_list->list);
753                 kfree(target_reset_list);
754         }
755
756  out:
757         return rc;
758 }
759
760 static int
761 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
762                 u32 form, u32 form_specific)
763 {
764         ConfigExtendedPageHeader_t hdr;
765         CONFIGPARMS cfg;
766         SasEnclosurePage0_t *buffer;
767         dma_addr_t dma_handle;
768         int error;
769         __le64 le_identifier;
770
771         memset(&hdr, 0, sizeof(hdr));
772         hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION;
773         hdr.PageNumber = 0;
774         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
775         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE;
776
777         cfg.cfghdr.ehdr = &hdr;
778         cfg.physAddr = -1;
779         cfg.pageAddr = form + form_specific;
780         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
781         cfg.dir = 0;    /* read */
782         cfg.timeout = 10;
783
784         error = mpt_config(ioc, &cfg);
785         if (error)
786                 goto out;
787         if (!hdr.ExtPageLength) {
788                 error = -ENXIO;
789                 goto out;
790         }
791
792         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
793                         &dma_handle);
794         if (!buffer) {
795                 error = -ENOMEM;
796                 goto out;
797         }
798
799         cfg.physAddr = dma_handle;
800         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
801
802         error = mpt_config(ioc, &cfg);
803         if (error)
804                 goto out_free_consistent;
805
806         /* save config data */
807         memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64));
808         enclosure->enclosure_logical_id = le64_to_cpu(le_identifier);
809         enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle);
810         enclosure->flags = le16_to_cpu(buffer->Flags);
811         enclosure->num_slot = le16_to_cpu(buffer->NumSlots);
812         enclosure->start_slot = le16_to_cpu(buffer->StartSlot);
813         enclosure->start_id = buffer->StartTargetID;
814         enclosure->start_channel = buffer->StartBus;
815         enclosure->sep_id = buffer->SEPTargetID;
816         enclosure->sep_channel = buffer->SEPBus;
817
818  out_free_consistent:
819         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
820                             buffer, dma_handle);
821  out:
822         return error;
823 }
824
825 static int
826 mptsas_slave_configure(struct scsi_device *sdev)
827 {
828
829         if (sdev->channel == MPTSAS_RAID_CHANNEL)
830                 goto out;
831
832         sas_read_port_mode_page(sdev);
833
834  out:
835         return mptscsih_slave_configure(sdev);
836 }
837
838 static int
839 mptsas_target_alloc(struct scsi_target *starget)
840 {
841         struct Scsi_Host *host = dev_to_shost(&starget->dev);
842         MPT_SCSI_HOST           *hd = shost_priv(host);
843         VirtTarget              *vtarget;
844         u8                      id, channel;
845         struct sas_rphy         *rphy;
846         struct mptsas_portinfo  *p;
847         int                      i;
848         MPT_ADAPTER             *ioc = hd->ioc;
849
850         vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
851         if (!vtarget)
852                 return -ENOMEM;
853
854         vtarget->starget = starget;
855         vtarget->ioc_id = ioc->id;
856         vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
857         id = starget->id;
858         channel = 0;
859
860         /*
861          * RAID volumes placed beyond the last expected port.
862          */
863         if (starget->channel == MPTSAS_RAID_CHANNEL) {
864                 for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
865                         if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
866                                 channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
867                 goto out;
868         }
869
870         rphy = dev_to_rphy(starget->dev.parent);
871         mutex_lock(&ioc->sas_topology_mutex);
872         list_for_each_entry(p, &ioc->sas_topology, list) {
873                 for (i = 0; i < p->num_phys; i++) {
874                         if (p->phy_info[i].attached.sas_address !=
875                                         rphy->identify.sas_address)
876                                 continue;
877                         id = p->phy_info[i].attached.id;
878                         channel = p->phy_info[i].attached.channel;
879                         mptsas_set_starget(&p->phy_info[i], starget);
880
881                         /*
882                          * Exposing hidden raid components
883                          */
884                         if (mptscsih_is_phys_disk(ioc, channel, id)) {
885                                 id = mptscsih_raid_id_to_num(ioc,
886                                                 channel, id);
887                                 vtarget->tflags |=
888                                     MPT_TARGET_FLAGS_RAID_COMPONENT;
889                                 p->phy_info[i].attached.phys_disk_num = id;
890                         }
891                         mutex_unlock(&ioc->sas_topology_mutex);
892                         goto out;
893                 }
894         }
895         mutex_unlock(&ioc->sas_topology_mutex);
896
897         kfree(vtarget);
898         return -ENXIO;
899
900  out:
901         vtarget->id = id;
902         vtarget->channel = channel;
903         starget->hostdata = vtarget;
904         return 0;
905 }
906
907 static void
908 mptsas_target_destroy(struct scsi_target *starget)
909 {
910         struct Scsi_Host *host = dev_to_shost(&starget->dev);
911         MPT_SCSI_HOST           *hd = shost_priv(host);
912         struct sas_rphy         *rphy;
913         struct mptsas_portinfo  *p;
914         int                      i;
915         MPT_ADAPTER *ioc = hd->ioc;
916
917         if (!starget->hostdata)
918                 return;
919
920         if (starget->channel == MPTSAS_RAID_CHANNEL)
921                 goto out;
922
923         rphy = dev_to_rphy(starget->dev.parent);
924         list_for_each_entry(p, &ioc->sas_topology, list) {
925                 for (i = 0; i < p->num_phys; i++) {
926                         if (p->phy_info[i].attached.sas_address !=
927                                         rphy->identify.sas_address)
928                                 continue;
929                         mptsas_set_starget(&p->phy_info[i], NULL);
930                         goto out;
931                 }
932         }
933
934  out:
935         kfree(starget->hostdata);
936         starget->hostdata = NULL;
937 }
938
939
940 static int
941 mptsas_slave_alloc(struct scsi_device *sdev)
942 {
943         struct Scsi_Host        *host = sdev->host;
944         MPT_SCSI_HOST           *hd = shost_priv(host);
945         struct sas_rphy         *rphy;
946         struct mptsas_portinfo  *p;
947         VirtDevice              *vdevice;
948         struct scsi_target      *starget;
949         int                     i;
950         MPT_ADAPTER *ioc = hd->ioc;
951
952         vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
953         if (!vdevice) {
954                 printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
955                                 ioc->name, sizeof(VirtDevice));
956                 return -ENOMEM;
957         }
958         starget = scsi_target(sdev);
959         vdevice->vtarget = starget->hostdata;
960
961         if (sdev->channel == MPTSAS_RAID_CHANNEL)
962                 goto out;
963
964         rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
965         mutex_lock(&ioc->sas_topology_mutex);
966         list_for_each_entry(p, &ioc->sas_topology, list) {
967                 for (i = 0; i < p->num_phys; i++) {
968                         if (p->phy_info[i].attached.sas_address !=
969                                         rphy->identify.sas_address)
970                                 continue;
971                         vdevice->lun = sdev->lun;
972                         /*
973                          * Exposing hidden raid components
974                          */
975                         if (mptscsih_is_phys_disk(ioc,
976                             p->phy_info[i].attached.channel,
977                             p->phy_info[i].attached.id))
978                                 sdev->no_uld_attach = 1;
979                         mutex_unlock(&ioc->sas_topology_mutex);
980                         goto out;
981                 }
982         }
983         mutex_unlock(&ioc->sas_topology_mutex);
984
985         kfree(vdevice);
986         return -ENXIO;
987
988  out:
989         vdevice->vtarget->num_luns++;
990         sdev->hostdata = vdevice;
991         return 0;
992 }
993
994 static int
995 mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
996 {
997         VirtDevice      *vdevice = SCpnt->device->hostdata;
998
999         if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
1000                 SCpnt->result = DID_NO_CONNECT << 16;
1001                 done(SCpnt);
1002                 return 0;
1003         }
1004
1005 //      scsi_print_command(SCpnt);
1006
1007         return mptscsih_qcmd(SCpnt,done);
1008 }
1009
1010
1011 static struct scsi_host_template mptsas_driver_template = {
1012         .module                         = THIS_MODULE,
1013         .proc_name                      = "mptsas",
1014         .proc_info                      = mptscsih_proc_info,
1015         .name                           = "MPT SPI Host",
1016         .info                           = mptscsih_info,
1017         .queuecommand                   = mptsas_qcmd,
1018         .target_alloc                   = mptsas_target_alloc,
1019         .slave_alloc                    = mptsas_slave_alloc,
1020         .slave_configure                = mptsas_slave_configure,
1021         .target_destroy                 = mptsas_target_destroy,
1022         .slave_destroy                  = mptscsih_slave_destroy,
1023         .change_queue_depth             = mptscsih_change_queue_depth,
1024         .eh_abort_handler               = mptscsih_abort,
1025         .eh_device_reset_handler        = mptscsih_dev_reset,
1026         .eh_bus_reset_handler           = mptscsih_bus_reset,
1027         .eh_host_reset_handler          = mptscsih_host_reset,
1028         .bios_param                     = mptscsih_bios_param,
1029         .can_queue                      = MPT_FC_CAN_QUEUE,
1030         .this_id                        = -1,
1031         .sg_tablesize                   = MPT_SCSI_SG_DEPTH,
1032         .max_sectors                    = 8192,
1033         .cmd_per_lun                    = 7,
1034         .use_clustering                 = ENABLE_CLUSTERING,
1035         .shost_attrs                    = mptscsih_host_attrs,
1036 };
1037
1038 static int mptsas_get_linkerrors(struct sas_phy *phy)
1039 {
1040         MPT_ADAPTER *ioc = phy_to_ioc(phy);
1041         ConfigExtendedPageHeader_t hdr;
1042         CONFIGPARMS cfg;
1043         SasPhyPage1_t *buffer;
1044         dma_addr_t dma_handle;
1045         int error;
1046
1047         /* FIXME: only have link errors on local phys */
1048         if (!scsi_is_sas_phy_local(phy))
1049                 return -EINVAL;
1050
1051         hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
1052         hdr.ExtPageLength = 0;
1053         hdr.PageNumber = 1 /* page number 1*/;
1054         hdr.Reserved1 = 0;
1055         hdr.Reserved2 = 0;
1056         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1057         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
1058
1059         cfg.cfghdr.ehdr = &hdr;
1060         cfg.physAddr = -1;
1061         cfg.pageAddr = phy->identify.phy_identifier;
1062         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1063         cfg.dir = 0;    /* read */
1064         cfg.timeout = 10;
1065
1066         error = mpt_config(ioc, &cfg);
1067         if (error)
1068                 return error;
1069         if (!hdr.ExtPageLength)
1070                 return -ENXIO;
1071
1072         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1073                                       &dma_handle);
1074         if (!buffer)
1075                 return -ENOMEM;
1076
1077         cfg.physAddr = dma_handle;
1078         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1079
1080         error = mpt_config(ioc, &cfg);
1081         if (error)
1082                 goto out_free_consistent;
1083
1084         mptsas_print_phy_pg1(ioc, buffer);
1085
1086         phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount);
1087         phy->running_disparity_error_count =
1088                 le32_to_cpu(buffer->RunningDisparityErrorCount);
1089         phy->loss_of_dword_sync_count =
1090                 le32_to_cpu(buffer->LossDwordSynchCount);
1091         phy->phy_reset_problem_count =
1092                 le32_to_cpu(buffer->PhyResetProblemCount);
1093
1094  out_free_consistent:
1095         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1096                             buffer, dma_handle);
1097         return error;
1098 }
1099
1100 static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
1101                 MPT_FRAME_HDR *reply)
1102 {
1103         ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
1104         if (reply != NULL) {
1105                 ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
1106                 memcpy(ioc->sas_mgmt.reply, reply,
1107                     min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
1108         }
1109         complete(&ioc->sas_mgmt.done);
1110         return 1;
1111 }
1112
1113 static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
1114 {
1115         MPT_ADAPTER *ioc = phy_to_ioc(phy);
1116         SasIoUnitControlRequest_t *req;
1117         SasIoUnitControlReply_t *reply;
1118         MPT_FRAME_HDR *mf;
1119         MPIHeader_t *hdr;
1120         unsigned long timeleft;
1121         int error = -ERESTARTSYS;
1122
1123         /* FIXME: fusion doesn't allow non-local phy reset */
1124         if (!scsi_is_sas_phy_local(phy))
1125                 return -EINVAL;
1126
1127         /* not implemented for expanders */
1128         if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP)
1129                 return -ENXIO;
1130
1131         if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex))
1132                 goto out;
1133
1134         mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
1135         if (!mf) {
1136                 error = -ENOMEM;
1137                 goto out_unlock;
1138         }
1139
1140         hdr = (MPIHeader_t *) mf;
1141         req = (SasIoUnitControlRequest_t *)mf;
1142         memset(req, 0, sizeof(SasIoUnitControlRequest_t));
1143         req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
1144         req->MsgContext = hdr->MsgContext;
1145         req->Operation = hard_reset ?
1146                 MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
1147         req->PhyNum = phy->identify.phy_identifier;
1148
1149         mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
1150
1151         timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
1152                         10 * HZ);
1153         if (!timeleft) {
1154                 /* On timeout reset the board */
1155                 mpt_free_msg_frame(ioc, mf);
1156                 mpt_HardResetHandler(ioc, CAN_SLEEP);
1157                 error = -ETIMEDOUT;
1158                 goto out_unlock;
1159         }
1160
1161         /* a reply frame is expected */
1162         if ((ioc->sas_mgmt.status &
1163             MPT_IOCTL_STATUS_RF_VALID) == 0) {
1164                 error = -ENXIO;
1165                 goto out_unlock;
1166         }
1167
1168         /* process the completed Reply Message Frame */
1169         reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
1170         if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
1171                 printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
1172                     ioc->name, __FUNCTION__, reply->IOCStatus, reply->IOCLogInfo);
1173                 error = -ENXIO;
1174                 goto out_unlock;
1175         }
1176
1177         error = 0;
1178
1179  out_unlock:
1180         mutex_unlock(&ioc->sas_mgmt.mutex);
1181  out:
1182         return error;
1183 }
1184
1185 static int
1186 mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
1187 {
1188         MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
1189         int i, error;
1190         struct mptsas_portinfo *p;
1191         struct mptsas_enclosure enclosure_info;
1192         u64 enclosure_handle;
1193
1194         mutex_lock(&ioc->sas_topology_mutex);
1195         list_for_each_entry(p, &ioc->sas_topology, list) {
1196                 for (i = 0; i < p->num_phys; i++) {
1197                         if (p->phy_info[i].attached.sas_address ==
1198                             rphy->identify.sas_address) {
1199                                 enclosure_handle = p->phy_info[i].
1200                                         attached.handle_enclosure;
1201                                 goto found_info;
1202                         }
1203                 }
1204         }
1205         mutex_unlock(&ioc->sas_topology_mutex);
1206         return -ENXIO;
1207
1208  found_info:
1209         mutex_unlock(&ioc->sas_topology_mutex);
1210         memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
1211         error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
1212                         (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
1213                          MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle);
1214         if (!error)
1215                 *identifier = enclosure_info.enclosure_logical_id;
1216         return error;
1217 }
1218
1219 static int
1220 mptsas_get_bay_identifier(struct sas_rphy *rphy)
1221 {
1222         MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
1223         struct mptsas_portinfo *p;
1224         int i, rc;
1225
1226         mutex_lock(&ioc->sas_topology_mutex);
1227         list_for_each_entry(p, &ioc->sas_topology, list) {
1228                 for (i = 0; i < p->num_phys; i++) {
1229                         if (p->phy_info[i].attached.sas_address ==
1230                             rphy->identify.sas_address) {
1231                                 rc = p->phy_info[i].attached.slot;
1232                                 goto out;
1233                         }
1234                 }
1235         }
1236         rc = -ENXIO;
1237  out:
1238         mutex_unlock(&ioc->sas_topology_mutex);
1239         return rc;
1240 }
1241
1242 static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
1243                               struct request *req)
1244 {
1245         MPT_ADAPTER *ioc = ((MPT_SCSI_HOST *) shost->hostdata)->ioc;
1246         MPT_FRAME_HDR *mf;
1247         SmpPassthroughRequest_t *smpreq;
1248         struct request *rsp = req->next_rq;
1249         int ret;
1250         int flagsLength;
1251         unsigned long timeleft;
1252         char *psge;
1253         dma_addr_t dma_addr_in = 0;
1254         dma_addr_t dma_addr_out = 0;
1255         u64 sas_address = 0;
1256
1257         if (!rsp) {
1258                 printk(MYIOC_s_ERR_FMT "%s: the smp response space is missing\n",
1259                     ioc->name, __FUNCTION__);
1260                 return -EINVAL;
1261         }
1262
1263         /* do we need to support multiple segments? */
1264         if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
1265                 printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n",
1266                     ioc->name, __FUNCTION__, req->bio->bi_vcnt, req->data_len,
1267                     rsp->bio->bi_vcnt, rsp->data_len);
1268                 return -EINVAL;
1269         }
1270
1271         ret = mutex_lock_interruptible(&ioc->sas_mgmt.mutex);
1272         if (ret)
1273                 goto out;
1274
1275         mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
1276         if (!mf) {
1277                 ret = -ENOMEM;
1278                 goto out_unlock;
1279         }
1280
1281         smpreq = (SmpPassthroughRequest_t *)mf;
1282         memset(smpreq, 0, sizeof(*smpreq));
1283
1284         smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4);
1285         smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH;
1286
1287         if (rphy)
1288                 sas_address = rphy->identify.sas_address;
1289         else {
1290                 struct mptsas_portinfo *port_info;
1291
1292                 mutex_lock(&ioc->sas_topology_mutex);
1293                 port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
1294                 if (port_info && port_info->phy_info)
1295                         sas_address =
1296                                 port_info->phy_info[0].phy->identify.sas_address;
1297                 mutex_unlock(&ioc->sas_topology_mutex);
1298         }
1299
1300         *((u64 *)&smpreq->SASAddress) = cpu_to_le64(sas_address);
1301
1302         psge = (char *)
1303                 (((int *) mf) + (offsetof(SmpPassthroughRequest_t, SGL) / 4));
1304
1305         /* request */
1306         flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1307                        MPI_SGE_FLAGS_END_OF_BUFFER |
1308                        MPI_SGE_FLAGS_DIRECTION |
1309                        mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
1310         flagsLength |= (req->data_len - 4);
1311
1312         dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
1313                                       req->data_len, PCI_DMA_BIDIRECTIONAL);
1314         if (!dma_addr_out)
1315                 goto put_mf;
1316         mpt_add_sge(psge, flagsLength, dma_addr_out);
1317         psge += (sizeof(u32) + sizeof(dma_addr_t));
1318
1319         /* response */
1320         flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
1321         flagsLength |= rsp->data_len + 4;
1322         dma_addr_in =  pci_map_single(ioc->pcidev, bio_data(rsp->bio),
1323                                       rsp->data_len, PCI_DMA_BIDIRECTIONAL);
1324         if (!dma_addr_in)
1325                 goto unmap;
1326         mpt_add_sge(psge, flagsLength, dma_addr_in);
1327
1328         mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
1329
1330         timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
1331         if (!timeleft) {
1332                 printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __FUNCTION__);
1333                 /* On timeout reset the board */
1334                 mpt_HardResetHandler(ioc, CAN_SLEEP);
1335                 ret = -ETIMEDOUT;
1336                 goto unmap;
1337         }
1338         mf = NULL;
1339
1340         if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
1341                 SmpPassthroughReply_t *smprep;
1342
1343                 smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
1344                 memcpy(req->sense, smprep, sizeof(*smprep));
1345                 req->sense_len = sizeof(*smprep);
1346                 req->data_len = 0;
1347                 rsp->data_len -= smprep->ResponseDataLength;
1348         } else {
1349                 printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
1350                     ioc->name, __FUNCTION__);
1351                 ret = -ENXIO;
1352         }
1353 unmap:
1354         if (dma_addr_out)
1355                 pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len,
1356                                  PCI_DMA_BIDIRECTIONAL);
1357         if (dma_addr_in)
1358                 pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len,
1359                                  PCI_DMA_BIDIRECTIONAL);
1360 put_mf:
1361         if (mf)
1362                 mpt_free_msg_frame(ioc, mf);
1363 out_unlock:
1364         mutex_unlock(&ioc->sas_mgmt.mutex);
1365 out:
1366         return ret;
1367 }
1368
1369 static struct sas_function_template mptsas_transport_functions = {
1370         .get_linkerrors         = mptsas_get_linkerrors,
1371         .get_enclosure_identifier = mptsas_get_enclosure_identifier,
1372         .get_bay_identifier     = mptsas_get_bay_identifier,
1373         .phy_reset              = mptsas_phy_reset,
1374         .smp_handler            = mptsas_smp_handler,
1375 };
1376
1377 static struct scsi_transport_template *mptsas_transport_template;
1378
1379 static int
1380 mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
1381 {
1382         ConfigExtendedPageHeader_t hdr;
1383         CONFIGPARMS cfg;
1384         SasIOUnitPage0_t *buffer;
1385         dma_addr_t dma_handle;
1386         int error, i;
1387
1388         hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
1389         hdr.ExtPageLength = 0;
1390         hdr.PageNumber = 0;
1391         hdr.Reserved1 = 0;
1392         hdr.Reserved2 = 0;
1393         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1394         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
1395
1396         cfg.cfghdr.ehdr = &hdr;
1397         cfg.physAddr = -1;
1398         cfg.pageAddr = 0;
1399         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1400         cfg.dir = 0;    /* read */
1401         cfg.timeout = 10;
1402
1403         error = mpt_config(ioc, &cfg);
1404         if (error)
1405                 goto out;
1406         if (!hdr.ExtPageLength) {
1407                 error = -ENXIO;
1408                 goto out;
1409         }
1410
1411         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1412                                             &dma_handle);
1413         if (!buffer) {
1414                 error = -ENOMEM;
1415                 goto out;
1416         }
1417
1418         cfg.physAddr = dma_handle;
1419         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1420
1421         error = mpt_config(ioc, &cfg);
1422         if (error)
1423                 goto out_free_consistent;
1424
1425         port_info->num_phys = buffer->NumPhys;
1426         port_info->phy_info = kcalloc(port_info->num_phys,
1427                 sizeof(*port_info->phy_info),GFP_KERNEL);
1428         if (!port_info->phy_info) {
1429                 error = -ENOMEM;
1430                 goto out_free_consistent;
1431         }
1432
1433         ioc->nvdata_version_persistent =
1434             le16_to_cpu(buffer->NvdataVersionPersistent);
1435         ioc->nvdata_version_default =
1436             le16_to_cpu(buffer->NvdataVersionDefault);
1437
1438         for (i = 0; i < port_info->num_phys; i++) {
1439                 mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
1440                 port_info->phy_info[i].phy_id = i;
1441                 port_info->phy_info[i].port_id =
1442                     buffer->PhyData[i].Port;
1443                 port_info->phy_info[i].negotiated_link_rate =
1444                     buffer->PhyData[i].NegotiatedLinkRate;
1445                 port_info->phy_info[i].portinfo = port_info;
1446                 port_info->phy_info[i].handle =
1447                     le16_to_cpu(buffer->PhyData[i].ControllerDevHandle);
1448         }
1449
1450  out_free_consistent:
1451         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1452                             buffer, dma_handle);
1453  out:
1454         return error;
1455 }
1456
1457 static int
1458 mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc)
1459 {
1460         ConfigExtendedPageHeader_t hdr;
1461         CONFIGPARMS cfg;
1462         SasIOUnitPage1_t *buffer;
1463         dma_addr_t dma_handle;
1464         int error;
1465         u16 device_missing_delay;
1466
1467         memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
1468         memset(&cfg, 0, sizeof(CONFIGPARMS));
1469
1470         cfg.cfghdr.ehdr = &hdr;
1471         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1472         cfg.timeout = 10;
1473         cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1474         cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
1475         cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION;
1476         cfg.cfghdr.ehdr->PageNumber = 1;
1477
1478         error = mpt_config(ioc, &cfg);
1479         if (error)
1480                 goto out;
1481         if (!hdr.ExtPageLength) {
1482                 error = -ENXIO;
1483                 goto out;
1484         }
1485
1486         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1487                                             &dma_handle);
1488         if (!buffer) {
1489                 error = -ENOMEM;
1490                 goto out;
1491         }
1492
1493         cfg.physAddr = dma_handle;
1494         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1495
1496         error = mpt_config(ioc, &cfg);
1497         if (error)
1498                 goto out_free_consistent;
1499
1500         ioc->io_missing_delay  =
1501             le16_to_cpu(buffer->IODeviceMissingDelay);
1502         device_missing_delay = le16_to_cpu(buffer->ReportDeviceMissingDelay);
1503         ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ?
1504             (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 :
1505             device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
1506
1507  out_free_consistent:
1508         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1509                             buffer, dma_handle);
1510  out:
1511         return error;
1512 }
1513
1514 static int
1515 mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
1516                 u32 form, u32 form_specific)
1517 {
1518         ConfigExtendedPageHeader_t hdr;
1519         CONFIGPARMS cfg;
1520         SasPhyPage0_t *buffer;
1521         dma_addr_t dma_handle;
1522         int error;
1523
1524         hdr.PageVersion = MPI_SASPHY0_PAGEVERSION;
1525         hdr.ExtPageLength = 0;
1526         hdr.PageNumber = 0;
1527         hdr.Reserved1 = 0;
1528         hdr.Reserved2 = 0;
1529         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1530         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
1531
1532         cfg.cfghdr.ehdr = &hdr;
1533         cfg.dir = 0;    /* read */
1534         cfg.timeout = 10;
1535
1536         /* Get Phy Pg 0 for each Phy. */
1537         cfg.physAddr = -1;
1538         cfg.pageAddr = form + form_specific;
1539         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1540
1541         error = mpt_config(ioc, &cfg);
1542         if (error)
1543                 goto out;
1544
1545         if (!hdr.ExtPageLength) {
1546                 error = -ENXIO;
1547                 goto out;
1548         }
1549
1550         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1551                                       &dma_handle);
1552         if (!buffer) {
1553                 error = -ENOMEM;
1554                 goto out;
1555         }
1556
1557         cfg.physAddr = dma_handle;
1558         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1559
1560         error = mpt_config(ioc, &cfg);
1561         if (error)
1562                 goto out_free_consistent;
1563
1564         mptsas_print_phy_pg0(ioc, buffer);
1565
1566         phy_info->hw_link_rate = buffer->HwLinkRate;
1567         phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
1568         phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
1569         phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
1570
1571  out_free_consistent:
1572         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1573                             buffer, dma_handle);
1574  out:
1575         return error;
1576 }
1577
1578 static int
1579 mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
1580                 u32 form, u32 form_specific)
1581 {
1582         ConfigExtendedPageHeader_t hdr;
1583         CONFIGPARMS cfg;
1584         SasDevicePage0_t *buffer;
1585         dma_addr_t dma_handle;
1586         __le64 sas_address;
1587         int error=0;
1588
1589         if (ioc->sas_discovery_runtime &&
1590                 mptsas_is_end_device(device_info))
1591                         goto out;
1592
1593         hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
1594         hdr.ExtPageLength = 0;
1595         hdr.PageNumber = 0;
1596         hdr.Reserved1 = 0;
1597         hdr.Reserved2 = 0;
1598         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1599         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE;
1600
1601         cfg.cfghdr.ehdr = &hdr;
1602         cfg.pageAddr = form + form_specific;
1603         cfg.physAddr = -1;
1604         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1605         cfg.dir = 0;    /* read */
1606         cfg.timeout = 10;
1607
1608         memset(device_info, 0, sizeof(struct mptsas_devinfo));
1609         error = mpt_config(ioc, &cfg);
1610         if (error)
1611                 goto out;
1612         if (!hdr.ExtPageLength) {
1613                 error = -ENXIO;
1614                 goto out;
1615         }
1616
1617         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1618                                       &dma_handle);
1619         if (!buffer) {
1620                 error = -ENOMEM;
1621                 goto out;
1622         }
1623
1624         cfg.physAddr = dma_handle;
1625         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1626
1627         error = mpt_config(ioc, &cfg);
1628         if (error)
1629                 goto out_free_consistent;
1630
1631         mptsas_print_device_pg0(ioc, buffer);
1632
1633         device_info->handle = le16_to_cpu(buffer->DevHandle);
1634         device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
1635         device_info->handle_enclosure =
1636             le16_to_cpu(buffer->EnclosureHandle);
1637         device_info->slot = le16_to_cpu(buffer->Slot);
1638         device_info->phy_id = buffer->PhyNum;
1639         device_info->port_id = buffer->PhysicalPort;
1640         device_info->id = buffer->TargetID;
1641         device_info->phys_disk_num = ~0;
1642         device_info->channel = buffer->Bus;
1643         memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
1644         device_info->sas_address = le64_to_cpu(sas_address);
1645         device_info->device_info =
1646             le32_to_cpu(buffer->DeviceInfo);
1647
1648  out_free_consistent:
1649         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1650                             buffer, dma_handle);
1651  out:
1652         return error;
1653 }
1654
1655 static int
1656 mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
1657                 u32 form, u32 form_specific)
1658 {
1659         ConfigExtendedPageHeader_t hdr;
1660         CONFIGPARMS cfg;
1661         SasExpanderPage0_t *buffer;
1662         dma_addr_t dma_handle;
1663         int i, error;
1664
1665         hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
1666         hdr.ExtPageLength = 0;
1667         hdr.PageNumber = 0;
1668         hdr.Reserved1 = 0;
1669         hdr.Reserved2 = 0;
1670         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1671         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1672
1673         cfg.cfghdr.ehdr = &hdr;
1674         cfg.physAddr = -1;
1675         cfg.pageAddr = form + form_specific;
1676         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1677         cfg.dir = 0;    /* read */
1678         cfg.timeout = 10;
1679
1680         memset(port_info, 0, sizeof(struct mptsas_portinfo));
1681         error = mpt_config(ioc, &cfg);
1682         if (error)
1683                 goto out;
1684
1685         if (!hdr.ExtPageLength) {
1686                 error = -ENXIO;
1687                 goto out;
1688         }
1689
1690         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1691                                       &dma_handle);
1692         if (!buffer) {
1693                 error = -ENOMEM;
1694                 goto out;
1695         }
1696
1697         cfg.physAddr = dma_handle;
1698         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1699
1700         error = mpt_config(ioc, &cfg);
1701         if (error)
1702                 goto out_free_consistent;
1703
1704         if (!buffer->NumPhys) {
1705                 error = -ENODEV;
1706                 goto out_free_consistent;
1707         }
1708
1709         /* save config data */
1710         port_info->num_phys = buffer->NumPhys;
1711         port_info->phy_info = kcalloc(port_info->num_phys,
1712                 sizeof(*port_info->phy_info),GFP_KERNEL);
1713         if (!port_info->phy_info) {
1714                 error = -ENOMEM;
1715                 goto out_free_consistent;
1716         }
1717
1718         for (i = 0; i < port_info->num_phys; i++) {
1719                 port_info->phy_info[i].portinfo = port_info;
1720                 port_info->phy_info[i].handle =
1721                     le16_to_cpu(buffer->DevHandle);
1722         }
1723
1724  out_free_consistent:
1725         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1726                             buffer, dma_handle);
1727  out:
1728         return error;
1729 }
1730
1731 static int
1732 mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
1733                 u32 form, u32 form_specific)
1734 {
1735         ConfigExtendedPageHeader_t hdr;
1736         CONFIGPARMS cfg;
1737         SasExpanderPage1_t *buffer;
1738         dma_addr_t dma_handle;
1739         int error=0;
1740
1741         if (ioc->sas_discovery_runtime &&
1742                 mptsas_is_end_device(&phy_info->attached))
1743                         goto out;
1744
1745         hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
1746         hdr.ExtPageLength = 0;
1747         hdr.PageNumber = 1;
1748         hdr.Reserved1 = 0;
1749         hdr.Reserved2 = 0;
1750         hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
1751         hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1752
1753         cfg.cfghdr.ehdr = &hdr;
1754         cfg.physAddr = -1;
1755         cfg.pageAddr = form + form_specific;
1756         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
1757         cfg.dir = 0;    /* read */
1758         cfg.timeout = 10;
1759
1760         error = mpt_config(ioc, &cfg);
1761         if (error)
1762                 goto out;
1763
1764         if (!hdr.ExtPageLength) {
1765                 error = -ENXIO;
1766                 goto out;
1767         }
1768
1769         buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1770                                       &dma_handle);
1771         if (!buffer) {
1772                 error = -ENOMEM;
1773                 goto out;
1774         }
1775
1776         cfg.physAddr = dma_handle;
1777         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
1778
1779         error = mpt_config(ioc, &cfg);
1780         if (error)
1781                 goto out_free_consistent;
1782
1783
1784         mptsas_print_expander_pg1(ioc, buffer);
1785
1786         /* save config data */
1787         phy_info->phy_id = buffer->PhyIdentifier;
1788         phy_info->port_id = buffer->PhysicalPort;
1789         phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
1790         phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
1791         phy_info->hw_link_rate = buffer->HwLinkRate;
1792         phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle);
1793         phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle);
1794
1795  out_free_consistent:
1796         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
1797                             buffer, dma_handle);
1798  out:
1799         return error;
1800 }
1801
1802 static void
1803 mptsas_parse_device_info(struct sas_identify *identify,
1804                 struct mptsas_devinfo *device_info)
1805 {
1806         u16 protocols;
1807
1808         identify->sas_address = device_info->sas_address;
1809         identify->phy_identifier = device_info->phy_id;
1810
1811         /*
1812          * Fill in Phy Initiator Port Protocol.
1813          * Bits 6:3, more than one bit can be set, fall through cases.
1814          */
1815         protocols = device_info->device_info & 0x78;
1816         identify->initiator_port_protocols = 0;
1817         if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR)
1818                 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
1819         if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
1820                 identify->initiator_port_protocols |= SAS_PROTOCOL_STP;
1821         if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR)
1822                 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
1823         if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST)
1824                 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA;
1825
1826         /*
1827          * Fill in Phy Target Port Protocol.
1828          * Bits 10:7, more than one bit can be set, fall through cases.
1829          */
1830         protocols = device_info->device_info & 0x780;
1831         identify->target_port_protocols = 0;
1832         if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET)
1833                 identify->target_port_protocols |= SAS_PROTOCOL_SSP;
1834         if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET)
1835                 identify->target_port_protocols |= SAS_PROTOCOL_STP;
1836         if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET)
1837                 identify->target_port_protocols |= SAS_PROTOCOL_SMP;
1838         if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
1839                 identify->target_port_protocols |= SAS_PROTOCOL_SATA;
1840
1841         /*
1842          * Fill in Attached device type.
1843          */
1844         switch (device_info->device_info &
1845                         MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) {
1846         case MPI_SAS_DEVICE_INFO_NO_DEVICE:
1847                 identify->device_type = SAS_PHY_UNUSED;
1848                 break;
1849         case MPI_SAS_DEVICE_INFO_END_DEVICE:
1850                 identify->device_type = SAS_END_DEVICE;
1851                 break;
1852         case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER:
1853                 identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
1854                 break;
1855         case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER:
1856                 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE;
1857                 break;
1858         }
1859 }
1860
1861 static int mptsas_probe_one_phy(struct device *dev,
1862                 struct mptsas_phyinfo *phy_info, int index, int local)
1863 {
1864         MPT_ADAPTER *ioc;
1865         struct sas_phy *phy;
1866         struct sas_port *port;
1867         int error = 0;
1868
1869         if (!dev) {
1870                 error = -ENODEV;
1871                 goto out;
1872         }
1873
1874         if (!phy_info->phy) {
1875                 phy = sas_phy_alloc(dev, index);
1876                 if (!phy) {
1877                         error = -ENOMEM;
1878                         goto out;
1879                 }
1880         } else
1881                 phy = phy_info->phy;
1882
1883         mptsas_parse_device_info(&phy->identify, &phy_info->identify);
1884
1885         /*
1886          * Set Negotiated link rate.
1887          */
1888         switch (phy_info->negotiated_link_rate) {
1889         case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED:
1890                 phy->negotiated_linkrate = SAS_PHY_DISABLED;
1891                 break;
1892         case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION:
1893                 phy->negotiated_linkrate = SAS_LINK_RATE_FAILED;
1894                 break;
1895         case MPI_SAS_IOUNIT0_RATE_1_5:
1896                 phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
1897                 break;
1898         case MPI_SAS_IOUNIT0_RATE_3_0:
1899                 phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
1900                 break;
1901         case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
1902         case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
1903         default:
1904                 phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
1905                 break;
1906         }
1907
1908         /*
1909          * Set Max hardware link rate.
1910          */
1911         switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
1912         case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5:
1913                 phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
1914                 break;
1915         case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
1916                 phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
1917                 break;
1918         default:
1919                 break;
1920         }
1921
1922         /*
1923          * Set Max programmed link rate.
1924          */
1925         switch (phy_info->programmed_link_rate &
1926                         MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) {
1927         case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5:
1928                 phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS;
1929                 break;
1930         case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0:
1931                 phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
1932                 break;
1933         default:
1934                 break;
1935         }
1936
1937         /*
1938          * Set Min hardware link rate.
1939          */
1940         switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) {
1941         case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5:
1942                 phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
1943                 break;
1944         case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
1945                 phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
1946                 break;
1947         default:
1948                 break;
1949         }
1950
1951         /*
1952          * Set Min programmed link rate.
1953          */
1954         switch (phy_info->programmed_link_rate &
1955                         MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) {
1956         case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5:
1957                 phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
1958                 break;
1959         case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0:
1960                 phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS;
1961                 break;
1962         default:
1963                 break;
1964         }
1965
1966         if (!phy_info->phy) {
1967
1968                 error = sas_phy_add(phy);
1969                 if (error) {
1970                         sas_phy_free(phy);
1971                         goto out;
1972                 }
1973                 phy_info->phy = phy;
1974         }
1975
1976         if (!phy_info->attached.handle ||
1977                         !phy_info->port_details)
1978                 goto out;
1979
1980         port = mptsas_get_port(phy_info);
1981         ioc = phy_to_ioc(phy_info->phy);
1982
1983         if (phy_info->sas_port_add_phy) {
1984
1985                 if (!port) {
1986                         port = sas_port_alloc_num(dev);
1987                         if (!port) {
1988                                 error = -ENOMEM;
1989                                 goto out;
1990                         }
1991                         error = sas_port_add(port);
1992                         if (error) {
1993                                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1994                                         "%s: exit at line=%d\n", ioc->name,
1995                                         __FUNCTION__, __LINE__));
1996                                 goto out;
1997                         }
1998                         mptsas_set_port(ioc, phy_info, port);
1999                         dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2000                             "sas_port_alloc: port=%p dev=%p port_id=%d\n",
2001                             ioc->name, port, dev, port->port_identifier));
2002                 }
2003                 dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
2004                     ioc->name, phy_info->phy_id));
2005                 sas_port_add_phy(port, phy_info->phy);
2006                 phy_info->sas_port_add_phy = 0;
2007         }
2008
2009         if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
2010
2011                 struct sas_rphy *rphy;
2012                 struct device *parent;
2013                 struct sas_identify identify;
2014
2015                 parent = dev->parent->parent;
2016                 /*
2017                  * Let the hotplug_work thread handle processing
2018                  * the adding/removing of devices that occur
2019                  * after start of day.
2020                  */
2021                 if (ioc->sas_discovery_runtime &&
2022                         mptsas_is_end_device(&phy_info->attached))
2023                                 goto out;
2024
2025                 mptsas_parse_device_info(&identify, &phy_info->attached);
2026                 if (scsi_is_host_device(parent)) {
2027                         struct mptsas_portinfo *port_info;
2028                         int i;
2029
2030                         mutex_lock(&ioc->sas_topology_mutex);
2031                         port_info = mptsas_find_portinfo_by_handle(ioc,
2032                                                                    ioc->handle);
2033                         mutex_unlock(&ioc->sas_topology_mutex);
2034
2035                         for (i = 0; i < port_info->num_phys; i++)
2036                                 if (port_info->phy_info[i].identify.sas_address ==
2037                                     identify.sas_address) {
2038                                         sas_port_mark_backlink(port);
2039                                         goto out;
2040                                 }
2041
2042                 } else if (scsi_is_sas_rphy(parent)) {
2043                         struct sas_rphy *parent_rphy = dev_to_rphy(parent);
2044                         if (identify.sas_address ==
2045                             parent_rphy->identify.sas_address) {
2046                                 sas_port_mark_backlink(port);
2047                                 goto out;
2048                         }
2049                 }
2050
2051                 switch (identify.device_type) {
2052                 case SAS_END_DEVICE:
2053                         rphy = sas_end_device_alloc(port);
2054                         break;
2055                 case SAS_EDGE_EXPANDER_DEVICE:
2056                 case SAS_FANOUT_EXPANDER_DEVICE:
2057                         rphy = sas_expander_alloc(port, identify.device_type);
2058                         break;
2059                 default:
2060                         rphy = NULL;
2061                         break;
2062                 }
2063                 if (!rphy) {
2064                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2065                                 "%s: exit at line=%d\n", ioc->name,
2066                                 __FUNCTION__, __LINE__));
2067                         goto out;
2068                 }
2069
2070                 rphy->identify = identify;
2071                 error = sas_rphy_add(rphy);
2072                 if (error) {
2073                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2074                                 "%s: exit at line=%d\n", ioc->name,
2075                                 __FUNCTION__, __LINE__));
2076                         sas_rphy_free(rphy);
2077                         goto out;
2078                 }
2079                 mptsas_set_rphy(ioc, phy_info, rphy);
2080         }
2081
2082  out:
2083         return error;
2084 }
2085
2086 static int
2087 mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
2088 {
2089         struct mptsas_portinfo *port_info, *hba;
2090         int error = -ENOMEM, i;
2091
2092         hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
2093         if (! hba)
2094                 goto out;
2095
2096         error = mptsas_sas_io_unit_pg0(ioc, hba);
2097         if (error)
2098                 goto out_free_port_info;
2099
2100         mptsas_sas_io_unit_pg1(ioc);
2101         mutex_lock(&ioc->sas_topology_mutex);
2102         ioc->handle = hba->phy_info[0].handle;
2103         port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
2104         if (!port_info) {
2105                 port_info = hba;
2106                 list_add_tail(&port_info->list, &ioc->sas_topology);
2107         } else {
2108                 for (i = 0; i < hba->num_phys; i++) {
2109                         port_info->phy_info[i].negotiated_link_rate =
2110                                 hba->phy_info[i].negotiated_link_rate;
2111                         port_info->phy_info[i].handle =
2112                                 hba->phy_info[i].handle;
2113                         port_info->phy_info[i].port_id =
2114                                 hba->phy_info[i].port_id;
2115                 }
2116                 kfree(hba->phy_info);
2117                 kfree(hba);
2118                 hba = NULL;
2119         }
2120         mutex_unlock(&ioc->sas_topology_mutex);
2121         for (i = 0; i < port_info->num_phys; i++) {
2122                 mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
2123                         (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
2124                          MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
2125
2126                 mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
2127                         (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2128                          MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2129                          port_info->phy_info[i].handle);
2130                 port_info->phy_info[i].identify.phy_id =
2131                     port_info->phy_info[i].phy_id = i;
2132                 if (port_info->phy_info[i].attached.handle)
2133                         mptsas_sas_device_pg0(ioc,
2134                                 &port_info->phy_info[i].attached,
2135                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2136                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2137                                 port_info->phy_info[i].attached.handle);
2138         }
2139
2140         mptsas_setup_wide_ports(ioc, port_info);
2141
2142         for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
2143                 mptsas_probe_one_phy(&ioc->sh->shost_gendev,
2144                     &port_info->phy_info[i], ioc->sas_index, 1);
2145
2146         return 0;
2147
2148  out_free_port_info:
2149         kfree(hba);
2150  out:
2151         return error;
2152 }
2153
2154 static int
2155 mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
2156 {
2157         struct mptsas_portinfo *port_info, *p, *ex;
2158         struct device *parent;
2159         struct sas_rphy *rphy;
2160         int error = -ENOMEM, i, j;
2161
2162         ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
2163         if (!ex)
2164                 goto out;
2165
2166         error = mptsas_sas_expander_pg0(ioc, ex,
2167             (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
2168              MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
2169         if (error)
2170                 goto out_free_port_info;
2171
2172         *handle = ex->phy_info[0].handle;
2173
2174         mutex_lock(&ioc->sas_topology_mutex);
2175         port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
2176         if (!port_info) {
2177                 port_info = ex;
2178                 list_add_tail(&port_info->list, &ioc->sas_topology);
2179         } else {
2180                 for (i = 0; i < ex->num_phys; i++) {
2181                         port_info->phy_info[i].handle =
2182                                 ex->phy_info[i].handle;
2183                         port_info->phy_info[i].port_id =
2184                                 ex->phy_info[i].port_id;
2185                 }
2186                 kfree(ex->phy_info);
2187                 kfree(ex);
2188                 ex = NULL;
2189         }
2190         mutex_unlock(&ioc->sas_topology_mutex);
2191
2192         for (i = 0; i < port_info->num_phys; i++) {
2193                 mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
2194                         (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
2195                          MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
2196
2197                 if (port_info->phy_info[i].identify.handle) {
2198                         mptsas_sas_device_pg0(ioc,
2199                                 &port_info->phy_info[i].identify,
2200                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2201                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2202                                 port_info->phy_info[i].identify.handle);
2203                         port_info->phy_info[i].identify.phy_id =
2204                             port_info->phy_info[i].phy_id;
2205                 }
2206
2207                 if (port_info->phy_info[i].attached.handle) {
2208                         mptsas_sas_device_pg0(ioc,
2209                                 &port_info->phy_info[i].attached,
2210                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
2211                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2212                                 port_info->phy_info[i].attached.handle);
2213                         port_info->phy_info[i].attached.phy_id =
2214                             port_info->phy_info[i].phy_id;
2215                 }
2216         }
2217
2218         parent = &ioc->sh->shost_gendev;
2219         for (i = 0; i < port_info->num_phys; i++) {
2220                 mutex_lock(&ioc->sas_topology_mutex);
2221                 list_for_each_entry(p, &ioc->sas_topology, list) {
2222                         for (j = 0; j < p->num_phys; j++) {
2223                                 if (port_info->phy_info[i].identify.handle !=
2224                                                 p->phy_info[j].attached.handle)
2225                                         continue;
2226                                 rphy = mptsas_get_rphy(&p->phy_info[j]);
2227                                 parent = &rphy->dev;
2228                         }
2229                 }
2230                 mutex_unlock(&ioc->sas_topology_mutex);
2231         }
2232
2233         mptsas_setup_wide_ports(ioc, port_info);
2234
2235         for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
2236                 mptsas_probe_one_phy(parent, &port_info->phy_info[i],
2237                     ioc->sas_index, 0);
2238
2239         return 0;
2240
2241  out_free_port_info:
2242         if (ex) {
2243                 kfree(ex->phy_info);
2244                 kfree(ex);
2245         }
2246  out:
2247         return error;
2248 }
2249
2250 /*
2251  * mptsas_delete_expander_phys
2252  *
2253  *
2254  * This will traverse topology, and remove expanders
2255  * that are no longer present
2256  */
2257 static void
2258 mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
2259 {
2260         struct mptsas_portinfo buffer;
2261         struct mptsas_portinfo *port_info, *n, *parent;
2262         struct mptsas_phyinfo *phy_info;
2263         struct sas_port * port;
2264         int i;
2265         u64     expander_sas_address;
2266
2267         mutex_lock(&ioc->sas_topology_mutex);
2268         list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
2269
2270                 if (port_info->phy_info &&
2271                     (!(port_info->phy_info[0].identify.device_info &
2272                     MPI_SAS_DEVICE_INFO_SMP_TARGET)))
2273                         continue;
2274
2275                 if (mptsas_sas_expander_pg0(ioc, &buffer,
2276                      (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
2277                      MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
2278                      port_info->phy_info[0].handle)) {
2279
2280                         /*
2281                          * Obtain the port_info instance to the parent port
2282                          */
2283                         parent = mptsas_find_portinfo_by_handle(ioc,
2284                             port_info->phy_info[0].identify.handle_parent);
2285
2286                         if (!parent)
2287                                 goto next_port;
2288
2289                         expander_sas_address =
2290                                 port_info->phy_info[0].identify.sas_address;
2291
2292                         /*
2293                          * Delete rphys in the parent that point
2294                          * to this expander.  The transport layer will
2295                          * cleanup all the children.
2296                          */
2297                         phy_info = parent->phy_info;
2298                         for (i = 0; i < parent->num_phys; i++, phy_info++) {
2299                                 port = mptsas_get_port(phy_info);
2300                                 if (!port)
2301                                         continue;
2302                                 if (phy_info->attached.sas_address !=
2303                                         expander_sas_address)
2304                                         continue;
2305                                 dsaswideprintk(ioc,
2306                                     dev_printk(KERN_DEBUG, &port->dev,
2307                                     MYIOC_s_FMT "delete port (%d)\n", ioc->name,
2308                                     port->port_identifier));
2309                                 sas_port_delete(port);
2310                                 mptsas_port_delete(ioc, phy_info->port_details);
2311                         }
2312  next_port:
2313
2314                         phy_info = port_info->phy_info;
2315                         for (i = 0; i < port_info->num_phys; i++, phy_info++)
2316                                 mptsas_port_delete(ioc, phy_info->port_details);
2317
2318                         list_del(&port_info->list);
2319                         kfree(port_info->phy_info);
2320                         kfree(port_info);
2321                 }
2322                 /*
2323                 * Free this memory allocated from inside
2324                 * mptsas_sas_expander_pg0
2325                 */
2326                 kfree(buffer.phy_info);
2327         }
2328         mutex_unlock(&ioc->sas_topology_mutex);
2329 }
2330
2331 /*
2332  * Start of day discovery
2333  */
2334 static void
2335 mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
2336 {
2337         u32 handle = 0xFFFF;
2338         int i;
2339
2340         mutex_lock(&ioc->sas_discovery_mutex);
2341         mptsas_probe_hba_phys(ioc);
2342         while (!mptsas_probe_expander_phys(ioc, &handle))
2343                 ;
2344         /*
2345           Reporting RAID volumes.
2346         */
2347         if (!ioc->ir_firmware)
2348                 goto out;
2349         if (!ioc->raid_data.pIocPg2)
2350                 goto out;
2351         if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
2352                 goto out;
2353         for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
2354                 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
2355                     ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
2356         }
2357  out:
2358         mutex_unlock(&ioc->sas_discovery_mutex);
2359 }
2360
2361 /*
2362  * Work queue thread to handle Runtime discovery
2363  * Mere purpose is the hot add/delete of expanders
2364  *(Mutex UNLOCKED)
2365  */
2366 static void
2367 __mptsas_discovery_work(MPT_ADAPTER *ioc)
2368 {
2369         u32 handle = 0xFFFF;
2370
2371         ioc->sas_discovery_runtime=1;
2372         mptsas_delete_expander_phys(ioc);
2373         mptsas_probe_hba_phys(ioc);
2374         while (!mptsas_probe_expander_phys(ioc, &handle))
2375                 ;
2376         ioc->sas_discovery_runtime=0;
2377 }
2378
2379 /*
2380  * Work queue thread to handle Runtime discovery
2381  * Mere purpose is the hot add/delete of expanders
2382  *(Mutex LOCKED)
2383  */
2384 static void
2385 mptsas_discovery_work(struct work_struct *work)
2386 {
2387         struct mptsas_discovery_event *ev =
2388                 container_of(work, struct mptsas_discovery_event, work);
2389         MPT_ADAPTER *ioc = ev->ioc;
2390
2391         mutex_lock(&ioc->sas_discovery_mutex);
2392         __mptsas_discovery_work(ioc);
2393         mutex_unlock(&ioc->sas_discovery_mutex);
2394         kfree(ev);
2395 }
2396
2397 static struct mptsas_phyinfo *
2398 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
2399 {
2400         struct mptsas_portinfo *port_info;
2401         struct mptsas_phyinfo *phy_info = NULL;
2402         int i;
2403
2404         mutex_lock(&ioc->sas_topology_mutex);
2405         list_for_each_entry(port_info, &ioc->sas_topology, list) {
2406                 for (i = 0; i < port_info->num_phys; i++) {
2407                         if (!mptsas_is_end_device(
2408                                 &port_info->phy_info[i].attached))
2409                                 continue;
2410                         if (port_info->phy_info[i].attached.sas_address
2411                             != sas_address)
2412                                 continue;
2413                         phy_info = &port_info->phy_info[i];
2414                         break;
2415                 }
2416         }
2417         mutex_unlock(&ioc->sas_topology_mutex);
2418         return phy_info;
2419 }
2420
2421 static struct mptsas_phyinfo *
2422 mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
2423 {
2424         struct mptsas_portinfo *port_info;
2425         struct mptsas_phyinfo *phy_info = NULL;
2426         int i;
2427
2428         mutex_lock(&ioc->sas_topology_mutex);
2429         list_for_each_entry(port_info, &ioc->sas_topology, list) {
2430                 for (i = 0; i < port_info->num_phys; i++) {
2431                         if (!mptsas_is_end_device(
2432                                 &port_info->phy_info[i].attached))
2433                                 continue;
2434                         if (port_info->phy_info[i].attached.id != id)
2435                                 continue;
2436                         if (port_info->phy_info[i].attached.channel != channel)
2437                                 continue;
2438                         phy_info = &port_info->phy_info[i];
2439                         break;
2440                 }
2441         }
2442         mutex_unlock(&ioc->sas_topology_mutex);
2443         return phy_info;
2444 }
2445
2446 static struct mptsas_phyinfo *
2447 mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2448 {
2449         struct mptsas_portinfo *port_info;
2450         struct mptsas_phyinfo *phy_info = NULL;
2451         int i;
2452
2453         mutex_lock(&ioc->sas_topology_mutex);
2454         list_for_each_entry(port_info, &ioc->sas_topology, list) {
2455                 for (i = 0; i < port_info->num_phys; i++) {
2456                         if (!mptsas_is_end_device(
2457                                 &port_info->phy_info[i].attached))
2458                                 continue;
2459                         if (port_info->phy_info[i].attached.phys_disk_num == ~0)
2460                                 continue;
2461                         if (port_info->phy_info[i].attached.phys_disk_num != id)
2462                                 continue;
2463                         if (port_info->phy_info[i].attached.channel != channel)
2464                                 continue;
2465                         phy_info = &port_info->phy_info[i];
2466                         break;
2467                 }
2468         }
2469         mutex_unlock(&ioc->sas_topology_mutex);
2470         return phy_info;
2471 }
2472
2473 /*
2474  * Work queue thread to clear the persitency table
2475  */
2476 static void
2477 mptsas_persist_clear_table(struct work_struct *work)
2478 {
2479         MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
2480
2481         mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
2482 }
2483
2484 static void
2485 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
2486 {
2487         int rc;
2488
2489         sdev->no_uld_attach = data ? 1 : 0;
2490         rc = scsi_device_reprobe(sdev);
2491 }
2492
2493 static void
2494 mptsas_reprobe_target(struct scsi_target *starget, int uld_attach)
2495 {
2496         starget_for_each_device(starget, uld_attach ? (void *)1 : NULL,
2497                         mptsas_reprobe_lun);
2498 }
2499
2500 static void
2501 mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
2502 {
2503         CONFIGPARMS                     cfg;
2504         ConfigPageHeader_t              hdr;
2505         dma_addr_t                      dma_handle;
2506         pRaidVolumePage0_t              buffer = NULL;
2507         RaidPhysDiskPage0_t             phys_disk;
2508         int                             i;
2509         struct mptsas_hotplug_event     *ev;
2510
2511         memset(&cfg, 0 , sizeof(CONFIGPARMS));
2512         memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
2513         hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
2514         cfg.pageAddr = (channel << 8) + id;
2515         cfg.cfghdr.hdr = &hdr;
2516         cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
2517
2518         if (mpt_config(ioc, &cfg) != 0)
2519                 goto out;
2520
2521         if (!hdr.PageLength)
2522                 goto out;
2523
2524         buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
2525             &dma_handle);
2526
2527         if (!buffer)
2528                 goto out;
2529
2530         cfg.physAddr = dma_handle;
2531         cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
2532
2533         if (mpt_config(ioc, &cfg) != 0)
2534                 goto out;
2535
2536         if (!(buffer->VolumeStatus.Flags &
2537             MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE))
2538                 goto out;
2539
2540         if (!buffer->NumPhysDisks)
2541                 goto out;
2542
2543         for (i = 0; i < buffer->NumPhysDisks; i++) {
2544
2545                 if (mpt_raid_phys_disk_pg0(ioc,
2546                     buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
2547                         continue;
2548
2549                 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2550                 if (!ev) {
2551                         printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
2552                         goto out;
2553                 }
2554
2555                 INIT_WORK(&ev->work, mptsas_hotplug_work);
2556                 ev->ioc = ioc;
2557                 ev->id = phys_disk.PhysDiskID;
2558                 ev->channel = phys_disk.PhysDiskBus;
2559                 ev->phys_disk_num_valid = 1;
2560                 ev->phys_disk_num = phys_disk.PhysDiskNum;
2561                 ev->event_type = MPTSAS_ADD_DEVICE;
2562                 schedule_work(&ev->work);
2563         }
2564
2565  out:
2566         if (buffer)
2567                 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
2568                     dma_handle);
2569 }
2570 /*
2571  * Work queue thread to handle SAS hotplug events
2572  */
2573 static void
2574 mptsas_hotplug_work(struct work_struct *work)
2575 {
2576         struct mptsas_hotplug_event *ev =
2577                 container_of(work, struct mptsas_hotplug_event, work);
2578
2579         MPT_ADAPTER *ioc = ev->ioc;
2580         struct mptsas_phyinfo *phy_info;
2581         struct sas_rphy *rphy;
2582         struct sas_port *port;
2583         struct scsi_device *sdev;
2584         struct scsi_target * starget;
2585         struct sas_identify identify;
2586         char *ds = NULL;
2587         struct mptsas_devinfo sas_device;
2588         VirtTarget *vtarget;
2589         VirtDevice *vdevice;
2590
2591         mutex_lock(&ioc->sas_discovery_mutex);
2592         switch (ev->event_type) {
2593         case MPTSAS_DEL_DEVICE:
2594
2595                 phy_info = NULL;
2596                 if (ev->phys_disk_num_valid) {
2597                         if (ev->hidden_raid_component){
2598                                 if (mptsas_sas_device_pg0(ioc, &sas_device,
2599                                     (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
2600                                      MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2601                                     (ev->channel << 8) + ev->id)) {
2602                                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2603                                         "%s: exit at line=%d\n", ioc->name,
2604                                                 __FUNCTION__, __LINE__));
2605                                         break;
2606                                 }
2607                                 phy_info = mptsas_find_phyinfo_by_sas_address(
2608                                     ioc, sas_device.sas_address);
2609                         }else
2610                                 phy_info = mptsas_find_phyinfo_by_phys_disk_num(
2611                                     ioc, ev->channel, ev->phys_disk_num);
2612                 }
2613
2614                 if (!phy_info)
2615                         phy_info = mptsas_find_phyinfo_by_target(ioc,
2616                             ev->channel, ev->id);
2617
2618                 /*
2619                  * Sanity checks, for non-existing phys and remote rphys.
2620                  */
2621                 if (!phy_info){
2622                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2623                                 "%s: exit at line=%d\n", ioc->name,
2624                                 __FUNCTION__, __LINE__));
2625                         break;
2626                 }
2627                 if (!phy_info->port_details) {
2628                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2629                                 "%s: exit at line=%d\n", ioc->name,
2630                                 __FUNCTION__, __LINE__));
2631                         break;
2632                 }
2633                 rphy = mptsas_get_rphy(phy_info);
2634                 if (!rphy) {
2635                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2636                                 "%s: exit at line=%d\n", ioc->name,
2637                                 __FUNCTION__, __LINE__));
2638                         break;
2639                 }
2640
2641                 port = mptsas_get_port(phy_info);
2642                 if (!port) {
2643                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2644                                 "%s: exit at line=%d\n", ioc->name,
2645                                 __FUNCTION__, __LINE__));
2646                         break;
2647                 }
2648
2649                 starget = mptsas_get_starget(phy_info);
2650                 if (starget) {
2651                         vtarget = starget->hostdata;
2652
2653                         if (!vtarget) {
2654                                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2655                                         "%s: exit at line=%d\n", ioc->name,
2656                                         __FUNCTION__, __LINE__));
2657                                 break;
2658                         }
2659
2660                         /*
2661                          * Handling  RAID components
2662                          */
2663                         if (ev->phys_disk_num_valid &&
2664                             ev->hidden_raid_component) {
2665                                 printk(MYIOC_s_INFO_FMT
2666                                     "RAID Hidding: channel=%d, id=%d, "
2667                                     "physdsk %d \n", ioc->name, ev->channel,
2668                                     ev->id, ev->phys_disk_num);
2669                                 vtarget->id = ev->phys_disk_num;
2670                                 vtarget->tflags |=
2671                                     MPT_TARGET_FLAGS_RAID_COMPONENT;
2672                                 mptsas_reprobe_target(starget, 1);
2673                                 phy_info->attached.phys_disk_num =
2674                                     ev->phys_disk_num;
2675                         break;
2676                         }
2677                 }
2678
2679                 if (phy_info->attached.device_info &
2680                     MPI_SAS_DEVICE_INFO_SSP_TARGET)
2681                         ds = "ssp";
2682                 if (phy_info->attached.device_info &
2683                     MPI_SAS_DEVICE_INFO_STP_TARGET)
2684                         ds = "stp";
2685                 if (phy_info->attached.device_info &
2686                     MPI_SAS_DEVICE_INFO_SATA_DEVICE)
2687                         ds = "sata";
2688
2689                 printk(MYIOC_s_INFO_FMT
2690                        "removing %s device, channel %d, id %d, phy %d\n",
2691                        ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
2692                 dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
2693                     "delete port (%d)\n", ioc->name, port->port_identifier);
2694                 sas_port_delete(port);
2695                 mptsas_port_delete(ioc, phy_info->port_details);
2696                 break;
2697         case MPTSAS_ADD_DEVICE:
2698
2699                 if (ev->phys_disk_num_valid)
2700                         mpt_findImVolumes(ioc);
2701
2702                 /*
2703                  * Refresh sas device pg0 data
2704                  */
2705                 if (mptsas_sas_device_pg0(ioc, &sas_device,
2706                     (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
2707                      MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
2708                         (ev->channel << 8) + ev->id)) {
2709                                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2710                                         "%s: exit at line=%d\n", ioc->name,
2711                                         __FUNCTION__, __LINE__));
2712                         break;
2713                 }
2714
2715                 __mptsas_discovery_work(ioc);
2716
2717                 phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
2718                                 sas_device.sas_address);
2719
2720                 if (!phy_info || !phy_info->port_details) {
2721                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2722                                 "%s: exit at line=%d\n", ioc->name,
2723                                 __FUNCTION__, __LINE__));
2724                         break;
2725                 }
2726
2727                 starget = mptsas_get_starget(phy_info);
2728                 if (starget && (!ev->hidden_raid_component)){
2729
2730                         vtarget = starget->hostdata;
2731
2732                         if (!vtarget) {
2733                                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2734                                     "%s: exit at line=%d\n", ioc->name,
2735                                     __FUNCTION__, __LINE__));
2736                                 break;
2737                         }
2738                         /*
2739                          * Handling  RAID components
2740                          */
2741                         if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
2742                                 printk(MYIOC_s_INFO_FMT
2743                                     "RAID Exposing: channel=%d, id=%d, "
2744                                     "physdsk %d \n", ioc->name, ev->channel,
2745                                     ev->id, ev->phys_disk_num);
2746                                 vtarget->tflags &=
2747                                     ~MPT_TARGET_FLAGS_RAID_COMPONENT;
2748                                 vtarget->id = ev->id;
2749                                 mptsas_reprobe_target(starget, 0);
2750                                 phy_info->attached.phys_disk_num = ~0;
2751                         }
2752                         break;
2753                 }
2754
2755                 if (mptsas_get_rphy(phy_info)) {
2756                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2757                                 "%s: exit at line=%d\n", ioc->name,
2758                                 __FUNCTION__, __LINE__));
2759                         if (ev->channel) printk("%d\n", __LINE__);
2760                         break;
2761                 }
2762
2763                 port = mptsas_get_port(phy_info);
2764                 if (!port) {
2765                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2766                                 "%s: exit at line=%d\n", ioc->name,
2767                                 __FUNCTION__, __LINE__));
2768                         break;
2769                 }
2770                 memcpy(&phy_info->attached, &sas_device,
2771                     sizeof(struct mptsas_devinfo));
2772
2773                 if (phy_info->attached.device_info &
2774                     MPI_SAS_DEVICE_INFO_SSP_TARGET)
2775                         ds = "ssp";
2776                 if (phy_info->attached.device_info &
2777                     MPI_SAS_DEVICE_INFO_STP_TARGET)
2778                         ds = "stp";
2779                 if (phy_info->attached.device_info &
2780                     MPI_SAS_DEVICE_INFO_SATA_DEVICE)
2781                         ds = "sata";
2782
2783                 printk(MYIOC_s_INFO_FMT
2784                        "attaching %s device, channel %d, id %d, phy %d\n",
2785                        ioc->name, ds, ev->channel, ev->id, ev->phy_id);
2786
2787                 mptsas_parse_device_info(&identify, &phy_info->attached);
2788                 rphy = sas_end_device_alloc(port);
2789                 if (!rphy) {
2790                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2791                                 "%s: exit at line=%d\n", ioc->name,
2792                                 __FUNCTION__, __LINE__));
2793                         break; /* non-fatal: an rphy can be added later */
2794                 }
2795
2796                 rphy->identify = identify;
2797                 if (sas_rphy_add(rphy)) {
2798                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
2799                                 "%s: exit at line=%d\n", ioc->name,
2800                                 __FUNCTION__, __LINE__));
2801                         sas_rphy_free(rphy);
2802                         break;
2803                 }
2804                 mptsas_set_rphy(ioc, phy_info, rphy);
2805                 break;
2806         case MPTSAS_ADD_RAID:
2807                 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
2808                     ev->id, 0);
2809                 if (sdev) {
2810                         scsi_device_put(sdev);
2811                         break;
2812                 }
2813                 printk(MYIOC_s_INFO_FMT
2814                        "attaching raid volume, channel %d, id %d\n",
2815                        ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
2816                 scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
2817                 mpt_findImVolumes(ioc);
2818                 break;
2819         case MPTSAS_DEL_RAID:
2820                 sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
2821                     ev->id, 0);
2822                 if (!sdev)
2823                         break;
2824                 printk(MYIOC_s_INFO_FMT
2825                        "removing raid volume, channel %d, id %d\n",
2826                        ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
2827                 vdevice = sdev->hostdata;
2828                 scsi_remove_device(sdev);
2829                 scsi_device_put(sdev);
2830                 mpt_findImVolumes(ioc);
2831                 break;
2832         case MPTSAS_ADD_INACTIVE_VOLUME:
2833                 mptsas_adding_inactive_raid_components(ioc,
2834                     ev->channel, ev->id);
2835                 break;
2836         case MPTSAS_IGNORE_EVENT:
2837         default:
2838                 break;
2839         }
2840
2841         mutex_unlock(&ioc->sas_discovery_mutex);
2842         kfree(ev);
2843 }
2844
2845 static void
2846 mptsas_send_sas_event(MPT_ADAPTER *ioc,
2847                 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
2848 {
2849         struct mptsas_hotplug_event *ev;
2850         u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
2851         __le64 sas_address;
2852
2853         if ((device_info &
2854              (MPI_SAS_DEVICE_INFO_SSP_TARGET |
2855               MPI_SAS_DEVICE_INFO_STP_TARGET |
2856               MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
2857                 return;
2858
2859         switch (sas_event_data->ReasonCode) {
2860         case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
2861
2862                 mptsas_target_reset_queue(ioc, sas_event_data);
2863                 break;
2864
2865         case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
2866                 ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2867                 if (!ev) {
2868                         printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
2869                         break;
2870                 }
2871
2872                 INIT_WORK(&ev->work, mptsas_hotplug_work);
2873                 ev->ioc = ioc;
2874                 ev->handle = le16_to_cpu(sas_event_data->DevHandle);
2875                 ev->parent_handle =
2876                     le16_to_cpu(sas_event_data->ParentDevHandle);
2877                 ev->channel = sas_event_data->Bus;
2878                 ev->id = sas_event_data->TargetID;
2879                 ev->phy_id = sas_event_data->PhyNum;
2880                 memcpy(&sas_address, &sas_event_data->SASAddress,
2881                     sizeof(__le64));
2882                 ev->sas_address = le64_to_cpu(sas_address);
2883                 ev->device_info = device_info;
2884
2885                 if (sas_event_data->ReasonCode &
2886                     MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
2887                         ev->event_type = MPTSAS_ADD_DEVICE;
2888                 else
2889                         ev->event_type = MPTSAS_DEL_DEVICE;
2890                 schedule_work(&ev->work);
2891                 break;
2892         case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
2893         /*
2894          * Persistent table is full.
2895          */
2896                 INIT_WORK(&ioc->sas_persist_task,
2897                     mptsas_persist_clear_table);
2898                 schedule_work(&ioc->sas_persist_task);
2899                 break;
2900         /*
2901          * TODO, handle other events
2902          */
2903         case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
2904         case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
2905         case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
2906         case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
2907         case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
2908         case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
2909         case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
2910         default:
2911                 break;
2912         }
2913 }
2914 static void
2915 mptsas_send_raid_event(MPT_ADAPTER *ioc,
2916                 EVENT_DATA_RAID *raid_event_data)
2917 {
2918         struct mptsas_hotplug_event *ev;
2919         int status = le32_to_cpu(raid_event_data->SettingsStatus);
2920         int state = (status >> 8) & 0xff;
2921
2922         if (ioc->bus_type != SAS)
2923                 return;
2924
2925         ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
2926         if (!ev) {
2927                 printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
2928                 return;
2929         }
2930
2931         INIT_WORK(&ev->work, mptsas_hotplug_work);
2932         ev->ioc = ioc;
2933         ev->id = raid_event_data->VolumeID;
2934         ev->channel = raid_event_data->VolumeBus;
2935         ev->event_type = MPTSAS_IGNORE_EVENT;
2936
2937         switch (raid_event_data->ReasonCode) {
2938         case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
2939                 ev->phys_disk_num_valid = 1;
2940                 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2941                 ev->event_type = MPTSAS_ADD_DEVICE;
2942                 break;
2943         case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
2944                 ev->phys_disk_num_valid = 1;
2945                 ev->phys_disk_num = raid_event_data->PhysDiskNum;
2946                 ev->hidden_raid_component = 1;
2947                 ev->event_type = MPTSAS_DEL_DEVICE;
2948                 break;
2949         case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
2950                 switch (state) {
2951                 case MPI_PD_STATE_ONLINE:
2952                 case MPI_PD_STATE_NOT_COMPATIBLE:
2953                         ev->phys_disk_num_valid = 1;
2954                         ev->phys_disk_num = raid_event_data->PhysDiskNum;
2955                         ev->hidden_raid_component = 1;
2956                         ev->event_type = MPTSAS_ADD_DEVICE;
2957                         break;
2958                 case MPI_PD_STATE_MISSING:
2959                 case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
2960                 case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
2961                 case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
2962                         ev->phys_disk_num_valid = 1;
2963                         ev->phys_disk_num = raid_event_data->PhysDiskNum;
2964                         ev->event_type = MPTSAS_DEL_DEVICE;
2965                         break;
2966                 default:
2967                         break;
2968                 }
2969                 break;
2970         case MPI_EVENT_RAID_RC_VOLUME_DELETED:
2971                 ev->event_type = MPTSAS_DEL_RAID;
2972                 break;
2973         case MPI_EVENT_RAID_RC_VOLUME_CREATED:
2974                 ev->event_type = MPTSAS_ADD_RAID;
2975                 break;
2976         case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
2977                 switch (state) {
2978                 case MPI_RAIDVOL0_STATUS_STATE_FAILED:
2979                 case MPI_RAIDVOL0_STATUS_STATE_MISSING:
2980                         ev->event_type = MPTSAS_DEL_RAID;
2981                         break;
2982                 case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
2983                 case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
2984                         ev->event_type = MPTSAS_ADD_RAID;
2985                         break;
2986                 default:
2987                         break;
2988                 }
2989                 break;
2990         default:
2991                 break;
2992         }
2993         schedule_work(&ev->work);
2994 }
2995
2996 static void
2997 mptsas_send_discovery_event(MPT_ADAPTER *ioc,
2998         EVENT_DATA_SAS_DISCOVERY *discovery_data)
2999 {
3000         struct mptsas_discovery_event *ev;
3001
3002         /*
3003          * DiscoveryStatus
3004          *
3005          * This flag will be non-zero when firmware
3006          * kicks off discovery, and return to zero
3007          * once its completed.
3008          */
3009         if (discovery_data->DiscoveryStatus)
3010                 return;
3011
3012         ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
3013         if (!ev)
3014                 return;
3015         INIT_WORK(&ev->work, mptsas_discovery_work);
3016         ev->ioc = ioc;
3017         schedule_work(&ev->work);
3018 };
3019
3020 /*
3021  * mptsas_send_ir2_event - handle exposing hidden disk when
3022  * an inactive raid volume is added
3023  *
3024  * @ioc: Pointer to MPT_ADAPTER structure
3025  * @ir2_data
3026  *
3027  */
3028 static void
3029 mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
3030 {
3031         struct mptsas_hotplug_event *ev;
3032
3033         if (ir2_data->ReasonCode !=
3034             MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
3035                 return;
3036
3037         ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
3038         if (!ev)
3039                 return;
3040
3041         INIT_WORK(&ev->work, mptsas_hotplug_work);
3042         ev->ioc = ioc;
3043         ev->id = ir2_data->TargetID;
3044         ev->channel = ir2_data->Bus;
3045         ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
3046
3047         schedule_work(&ev->work);
3048 };
3049
3050 static int
3051 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
3052 {
3053         int rc=1;
3054         u8 event = le32_to_cpu(reply->Event) & 0xFF;
3055
3056         if (!ioc->sh)
3057                 goto out;
3058
3059         /*
3060          * sas_discovery_ignore_events
3061          *
3062          * This flag is to prevent anymore processing of
3063          * sas events once mptsas_remove function is called.
3064          */
3065         if (ioc->sas_discovery_ignore_events) {
3066                 rc = mptscsih_event_process(ioc, reply);
3067                 goto out;
3068         }
3069
3070         switch (event) {
3071         case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
3072                 mptsas_send_sas_event(ioc,
3073                         (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
3074                 break;
3075         case MPI_EVENT_INTEGRATED_RAID:
3076                 mptsas_send_raid_event(ioc,
3077                         (EVENT_DATA_RAID *)reply->Data);
3078                 break;
3079         case MPI_EVENT_PERSISTENT_TABLE_FULL:
3080                 INIT_WORK(&ioc->sas_persist_task,
3081                     mptsas_persist_clear_table);
3082                 schedule_work(&ioc->sas_persist_task);
3083                 break;
3084          case MPI_EVENT_SAS_DISCOVERY:
3085                 mptsas_send_discovery_event(ioc,
3086                         (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
3087                 break;
3088         case MPI_EVENT_IR2:
3089                 mptsas_send_ir2_event(ioc,
3090                     (PTR_MPI_EVENT_DATA_IR2)reply->Data);
3091                 break;
3092         default:
3093                 rc = mptscsih_event_process(ioc, reply);
3094                 break;
3095         }
3096  out:
3097
3098         return rc;
3099 }
3100
3101 static int
3102 mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
3103 {
3104         struct Scsi_Host        *sh;
3105         MPT_SCSI_HOST           *hd;
3106         MPT_ADAPTER             *ioc;
3107         unsigned long            flags;
3108         int                      ii;
3109         int                      numSGE = 0;
3110         int                      scale;
3111         int                      ioc_cap;
3112         int                     error=0;
3113         int                     r;
3114
3115         r = mpt_attach(pdev,id);
3116         if (r)
3117                 return r;
3118
3119         ioc = pci_get_drvdata(pdev);
3120         ioc->DoneCtx = mptsasDoneCtx;
3121         ioc->TaskCtx = mptsasTaskCtx;
3122         ioc->InternalCtx = mptsasInternalCtx;
3123
3124         /*  Added sanity check on readiness of the MPT adapter.
3125          */
3126         if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
3127                 printk(MYIOC_s_WARN_FMT
3128                   "Skipping because it's not operational!\n",
3129                   ioc->name);
3130                 error = -ENODEV;
3131                 goto out_mptsas_probe;
3132         }
3133
3134         if (!ioc->active) {
3135                 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
3136                   ioc->name);
3137                 error = -ENODEV;
3138                 goto out_mptsas_probe;
3139         }
3140
3141         /*  Sanity check - ensure at least 1 port is INITIATOR capable
3142          */
3143         ioc_cap = 0;
3144         for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) {
3145                 if (ioc->pfacts[ii].ProtocolFlags &
3146                                 MPI_PORTFACTS_PROTOCOL_INITIATOR)
3147                         ioc_cap++;
3148         }
3149
3150         if (!ioc_cap) {
3151                 printk(MYIOC_s_WARN_FMT
3152                         "Skipping ioc=%p because SCSI Initiator mode "
3153                         "is NOT enabled!\n", ioc->name, ioc);
3154                 return 0;
3155         }
3156
3157         sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST));
3158         if (!sh) {
3159                 printk(MYIOC_s_WARN_FMT
3160                         "Unable to register controller with SCSI subsystem\n",
3161                         ioc->name);
3162                 error = -1;
3163                 goto out_mptsas_probe;
3164         }
3165
3166         spin_lock_irqsave(&ioc->FreeQlock, flags);
3167
3168         /* Attach the SCSI Host to the IOC structure
3169          */
3170         ioc->sh = sh;
3171
3172         sh->io_port = 0;
3173         sh->n_io_port = 0;
3174         sh->irq = 0;
3175
3176         /* set 16 byte cdb's */
3177         sh->max_cmd_len = 16;
3178
3179         sh->max_id = ioc->pfacts[0].PortSCSIID;
3180         sh->max_lun = max_lun;
3181
3182         sh->transportt = mptsas_transport_template;
3183
3184         sh->this_id = ioc->pfacts[0].PortSCSIID;
3185
3186         /* Required entry.
3187          */
3188         sh->unique_id = ioc->id;
3189
3190         INIT_LIST_HEAD(&ioc->sas_topology);
3191         mutex_init(&ioc->sas_topology_mutex);
3192         mutex_init(&ioc->sas_discovery_mutex);
3193         mutex_init(&ioc->sas_mgmt.mutex);
3194         init_completion(&ioc->sas_mgmt.done);
3195
3196         /* Verify that we won't exceed the maximum
3197          * number of chain buffers
3198          * We can optimize:  ZZ = req_sz/sizeof(SGE)
3199          * For 32bit SGE's:
3200          *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
3201          *               + (req_sz - 64)/sizeof(SGE)
3202          * A slightly different algorithm is required for
3203          * 64bit SGEs.
3204          */
3205         scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
3206         if (sizeof(dma_addr_t) == sizeof(u64)) {
3207                 numSGE = (scale - 1) *
3208                   (ioc->facts.MaxChainDepth-1) + scale +
3209                   (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
3210                   sizeof(u32));
3211         } else {
3212                 numSGE = 1 + (scale - 1) *
3213                   (ioc->facts.MaxChainDepth-1) + scale +
3214                   (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
3215                   sizeof(u32));
3216         }
3217
3218         if (numSGE < sh->sg_tablesize) {
3219                 /* Reset this value */
3220                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3221                   "Resetting sg_tablesize to %d from %d\n",
3222                   ioc->name, numSGE, sh->sg_tablesize));
3223                 sh->sg_tablesize = numSGE;
3224         }
3225
3226         hd = shost_priv(sh);
3227         hd->ioc = ioc;
3228
3229         /* SCSI needs scsi_cmnd lookup table!
3230          * (with size equal to req_depth*PtrSz!)
3231          */
3232         ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC);
3233         if (!ioc->ScsiLookup) {
3234                 error = -ENOMEM;
3235                 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
3236                 goto out_mptsas_probe;
3237         }
3238         spin_lock_init(&ioc->scsi_lookup_lock);
3239
3240         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
3241                  ioc->name, ioc->ScsiLookup));
3242
3243         /* Clear the TM flags
3244          */
3245         hd->tmPending = 0;
3246         hd->tmState = TM_STATE_NONE;
3247         hd->resetPending = 0;
3248         hd->abortSCpnt = NULL;
3249
3250         /* Clear the pointer used to store
3251          * single-threaded commands, i.e., those
3252          * issued during a bus scan, dv and
3253          * configuration pages.
3254          */
3255         hd->cmdPtr = NULL;
3256
3257         /* Initialize this SCSI Hosts' timers
3258          * To use, set the timer expires field
3259          * and add_timer
3260          */
3261         init_timer(&hd->timer);
3262         hd->timer.data = (unsigned long) hd;
3263         hd->timer.function = mptscsih_timer_expired;
3264
3265         ioc->sas_data.ptClear = mpt_pt_clear;
3266
3267         init_waitqueue_head(&hd->scandv_waitq);
3268         hd->scandv_wait_done = 0;
3269         hd->last_queue_full = 0;
3270         INIT_LIST_HEAD(&hd->target_reset_list);
3271         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
3272
3273         if (ioc->sas_data.ptClear==1) {
3274                 mptbase_sas_persist_operation(
3275                     ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
3276         }
3277
3278         error = scsi_add_host(sh, &ioc->pcidev->dev);
3279         if (error) {
3280                 dprintk(ioc, printk(MYIOC_s_ERR_FMT
3281                   "scsi_add_host failed\n", ioc->name));
3282                 goto out_mptsas_probe;
3283         }
3284
3285         mptsas_scan_sas_topology(ioc);
3286
3287         return 0;
3288
3289  out_mptsas_probe:
3290
3291         mptscsih_remove(pdev);
3292         return error;
3293 }
3294
3295 static void __devexit mptsas_remove(struct pci_dev *pdev)
3296 {
3297         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
3298         struct mptsas_portinfo *p, *n;
3299         int i;
3300
3301         ioc->sas_discovery_ignore_events = 1;
3302         sas_remove_host(ioc->sh);
3303
3304         mutex_lock(&ioc->sas_topology_mutex);
3305         list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
3306                 list_del(&p->list);
3307                 for (i = 0 ; i < p->num_phys ; i++)
3308                         mptsas_port_delete(ioc, p->phy_info[i].port_details);
3309                 kfree(p->phy_info);
3310                 kfree(p);
3311         }
3312         mutex_unlock(&ioc->sas_topology_mutex);
3313
3314         mptscsih_remove(pdev);
3315 }
3316
3317 static struct pci_device_id mptsas_pci_table[] = {
3318         { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064,
3319                 PCI_ANY_ID, PCI_ANY_ID },
3320         { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068,
3321                 PCI_ANY_ID, PCI_ANY_ID },
3322         { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E,
3323                 PCI_ANY_ID, PCI_ANY_ID },
3324         { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E,
3325                 PCI_ANY_ID, PCI_ANY_ID },
3326         { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078,
3327                 PCI_ANY_ID, PCI_ANY_ID },
3328         {0}     /* Terminating entry */
3329 };
3330 MODULE_DEVICE_TABLE(pci, mptsas_pci_table);
3331
3332
3333 static struct pci_driver mptsas_driver = {
3334         .name           = "mptsas",
3335         .id_table       = mptsas_pci_table,
3336         .probe          = mptsas_probe,
3337         .remove         = __devexit_p(mptsas_remove),
3338         .shutdown       = mptscsih_shutdown,
3339 #ifdef CONFIG_PM
3340         .suspend        = mptscsih_suspend,
3341         .resume         = mptscsih_resume,
3342 #endif
3343 };
3344
3345 static int __init
3346 mptsas_init(void)
3347 {
3348         int error;
3349
3350         show_mptmod_ver(my_NAME, my_VERSION);
3351
3352         mptsas_transport_template =
3353             sas_attach_transport(&mptsas_transport_functions);
3354         if (!mptsas_transport_template)
3355                 return -ENODEV;
3356
3357         mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
3358         mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
3359         mptsasInternalCtx =
3360                 mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
3361         mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
3362
3363         mpt_event_register(mptsasDoneCtx, mptsas_event_process);
3364         mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
3365
3366         error = pci_register_driver(&mptsas_driver);
3367         if (error)
3368                 sas_release_transport(mptsas_transport_template);
3369
3370         return error;
3371 }
3372
3373 static void __exit
3374 mptsas_exit(void)
3375 {
3376         pci_unregister_driver(&mptsas_driver);
3377         sas_release_transport(mptsas_transport_template);
3378
3379         mpt_reset_deregister(mptsasDoneCtx);
3380         mpt_event_deregister(mptsasDoneCtx);
3381
3382         mpt_deregister(mptsasMgmtCtx);
3383         mpt_deregister(mptsasInternalCtx);
3384         mpt_deregister(mptsasTaskCtx);
3385         mpt_deregister(mptsasDoneCtx);
3386 }
3387
3388 module_init(mptsas_init);
3389 module_exit(mptsas_exit);