a5e02005cdae37c0729036a98e7c99cb4c5eb854
[linux-2.6.git] / drivers / media / video / bt8xx / bttv-cards.c
1 /*
2
3     bttv-cards.c
4
5     this file has configuration informations - card-specific stuff
6     like the big tvcards array for the most part
7
8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; either version 2 of the License, or
15     (at your option) any later version.
16
17     This program is distributed in the hope that it will be useful,
18     but WITHOUT ANY WARRANTY; without even the implied warranty of
19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20     GNU General Public License for more details.
21
22     You should have received a copy of the GNU General Public License
23     along with this program; if not, write to the Free Software
24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/moduleparam.h>
31 #include <linux/kmod.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/vmalloc.h>
35 #include <linux/firmware.h>
36
37 #include <asm/io.h>
38
39 #include "bttvp.h"
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
42
43 /* fwd decl */
44 static void boot_msp34xx(struct bttv *btv, int pin);
45 static void boot_bt832(struct bttv *btv);
46 static void hauppauge_eeprom(struct bttv *btv);
47 static void avermedia_eeprom(struct bttv *btv);
48 static void osprey_eeprom(struct bttv *btv);
49 static void modtec_eeprom(struct bttv *btv);
50 static void init_PXC200(struct bttv *btv);
51 static void init_RTV24(struct bttv *btv);
52
53 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
56                                     int set);
57 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
58                                       int set);
59 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void rv605_muxsel(struct bttv *btv, unsigned int input);
68 static void eagle_muxsel(struct bttv *btv, unsigned int input);
69 static void xguard_muxsel(struct bttv *btv, unsigned int input);
70 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
71 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
72
73 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
74
75 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_init(struct bttv *btv);
77
78 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
79 static void tibetCS16_init(struct bttv *btv);
80
81 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
82 static void kodicom4400r_init(struct bttv *btv);
83
84 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
85 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
86
87 static int terratec_active_radio_upgrade(struct bttv *btv);
88 static int tea5757_read(struct bttv *btv);
89 static int tea5757_write(struct bttv *btv, int value);
90 static void identify_by_eeprom(struct bttv *btv,
91                                unsigned char eeprom_data[256]);
92 static int __devinit pvr_boot(struct bttv *btv);
93
94 /* config variables */
95 static unsigned int triton1;
96 static unsigned int vsfx;
97 static unsigned int latency = UNSET;
98 int no_overlay=-1;
99
100 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106 #ifdef MODULE
107 static unsigned int autoload = 1;
108 #else
109 static unsigned int autoload;
110 #endif
111 static unsigned int gpiomask = UNSET;
112 static unsigned int audioall = UNSET;
113 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
114
115 /* insmod options */
116 module_param(triton1,    int, 0444);
117 module_param(vsfx,       int, 0444);
118 module_param(no_overlay, int, 0444);
119 module_param(latency,    int, 0444);
120 module_param(gpiomask,   int, 0444);
121 module_param(audioall,   int, 0444);
122 module_param(autoload,   int, 0444);
123
124 module_param_array(card,     int, NULL, 0444);
125 module_param_array(pll,      int, NULL, 0444);
126 module_param_array(tuner,    int, NULL, 0444);
127 module_param_array(svhs,     int, NULL, 0444);
128 module_param_array(remote,   int, NULL, 0444);
129 module_param_array(audiomux, int, NULL, 0444);
130
131 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
132                  "[enable bug compatibility for triton1 + others]");
133 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
134                  "[yet another chipset flaw workaround]");
135 MODULE_PARM_DESC(latency,"pci latency timer");
136 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
137 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
138 MODULE_PARM_DESC(tuner,"specify installed tuner type");
139 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141                 " [some VIA/SIS chipsets are known to have problem with overlay]");
142
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards                                       */
145
146 static struct CARD {
147         unsigned id;
148         int cardnr;
149         char *name;
150 } cards[] __devinitdata = {
151         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
152         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
153         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
154         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
155         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
157         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
158         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
159         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
160
161         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
162         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
163
164         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
165         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
166         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
167         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
168         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
169         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
170         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
171         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
172         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
173
174         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
175         /* some cards ship with byteswapped IDs ... */
176         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
177         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
178         /* this seems to happen as well ... */
179         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
180
181         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
182         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
183         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
184
185         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
192
193         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
194         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
195         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
196         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
197         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
198
199         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
200         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
201         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
202         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
203
204         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
205         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
206         /* clashes with FlyVideo
207          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
208         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
209         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
210         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
211         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
212
213         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218
219         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
220         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
221         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
222         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
223         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
224
225         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
226         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
227         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
228         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
229
230         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
231         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
232         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
233         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
234
235         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
236         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
237         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
238         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
239         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
240         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
241         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
242         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
243         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
244         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
245         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
246         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
247         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
248         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
249         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
250         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
251         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
252         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
253         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
254         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
255         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
256         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
257         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
258         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
259         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
260
261         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
262         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
263
264         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
265         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
267         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
268         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
269         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
270
271         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
272         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
273
274         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
275         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
276         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
277         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
278         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
279         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
280         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
281         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
282         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
283
284         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
285         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
286
287         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
288         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
289         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
290         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
291
292         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
293
294         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
295         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
296
297         /* likely broken, vendor id doesn't match the other magic views ...
298          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
299
300         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
301         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
302
303         /* DVB cards (using pci function .1 for mpeg data xfer) */
304         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
305         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
307         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
308         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
309         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
310         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
311         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
312         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
313         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
314         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
315         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
316
317         { 0, -1, NULL }
318 };
319
320 /* ----------------------------------------------------------------------- */
321 /* array with description for bt848 / bt878 tv/grabber cards               */
322
323 struct tvcard bttv_tvcards[] = {
324         /* ---- card 0x00 ---------------------------------- */
325         [BTTV_BOARD_UNKNOWN] = {
326                 .name           = " *** UNKNOWN/GENERIC *** ",
327                 .video_inputs   = 4,
328                 .audio_inputs   = 1,
329                 .tuner          = 0,
330                 .svhs           = 2,
331                 .muxsel         = { 2, 3, 1, 0 },
332                 .tuner_type     = -1,
333                 .tuner_addr     = ADDR_UNSET,
334                 .radio_addr     = ADDR_UNSET,
335         },
336         [BTTV_BOARD_MIRO] = {
337                 .name           = "MIRO PCTV",
338                 .video_inputs   = 4,
339                 .audio_inputs   = 1,
340                 .tuner          = 0,
341                 .svhs           = 2,
342                 .gpiomask       = 15,
343                 .muxsel         = { 2, 3, 1, 1 },
344                 .gpiomux        = { 2, 0, 0, 0 },
345                 .gpiomute       = 10,
346                 .needs_tvaudio  = 1,
347                 .tuner_type     = -1,
348                 .tuner_addr     = ADDR_UNSET,
349                 .radio_addr     = ADDR_UNSET,
350         },
351         [BTTV_BOARD_HAUPPAUGE] = {
352                 .name           = "Hauppauge (bt848)",
353                 .video_inputs   = 4,
354                 .audio_inputs   = 1,
355                 .tuner          = 0,
356                 .svhs           = 2,
357                 .gpiomask       = 7,
358                 .muxsel         = { 2, 3, 1, 1 },
359                 .gpiomux        = { 0, 1, 2, 3 },
360                 .gpiomute       = 4,
361                 .needs_tvaudio  = 1,
362                 .tuner_type     = -1,
363                 .tuner_addr     = ADDR_UNSET,
364                 .radio_addr     = ADDR_UNSET,
365         },
366         [BTTV_BOARD_STB] = {
367                 .name           = "STB, Gateway P/N 6000699 (bt848)",
368                 .video_inputs   = 3,
369                 .audio_inputs   = 1,
370                 .tuner          = 0,
371                 .svhs           = 2,
372                 .gpiomask       = 7,
373                 .muxsel         = { 2, 3, 1, 1 },
374                 .gpiomux        = { 4, 0, 2, 3 },
375                 .gpiomute       = 1,
376                 .no_msp34xx     = 1,
377                 .needs_tvaudio  = 1,
378                 .tuner_type     = TUNER_PHILIPS_NTSC,
379                 .tuner_addr     = ADDR_UNSET,
380                 .radio_addr     = ADDR_UNSET,
381                 .pll            = PLL_28,
382                 .has_radio      = 1,
383         },
384
385         /* ---- card 0x04 ---------------------------------- */
386         [BTTV_BOARD_INTEL] = {
387                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
388                 .video_inputs   = 4,
389                 .audio_inputs   = 0,
390                 .tuner          = -1,
391                 .svhs           = 2,
392                 .gpiomask       = 0,
393                 .muxsel         = { 2, 3, 1, 1 },
394                 .gpiomux        = { 0 },
395                 .needs_tvaudio  = 0,
396                 .tuner_type     = 4,
397                 .tuner_addr     = ADDR_UNSET,
398                 .radio_addr     = ADDR_UNSET,
399         },
400         [BTTV_BOARD_DIAMOND] = {
401                 .name           = "Diamond DTV2000",
402                 .video_inputs   = 4,
403                 .audio_inputs   = 1,
404                 .tuner          = 0,
405                 .svhs           = 2,
406                 .gpiomask       = 3,
407                 .muxsel         = { 2, 3, 1, 0 },
408                 .gpiomux        = { 0, 1, 0, 1 },
409                 .gpiomute       = 3,
410                 .needs_tvaudio  = 1,
411                 .tuner_type     = -1,
412                 .tuner_addr     = ADDR_UNSET,
413                 .radio_addr     = ADDR_UNSET,
414         },
415         [BTTV_BOARD_AVERMEDIA] = {
416                 .name           = "AVerMedia TVPhone",
417                 .video_inputs   = 3,
418                 .audio_inputs   = 1,
419                 .tuner          = 0,
420                 .svhs           = 3,
421                 .muxsel         = { 2, 3, 1, 1 },
422                 .gpiomask       = 0x0f,
423                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
424                 /*                0x04 for some cards ?? */
425                 .needs_tvaudio  = 1,
426                 .tuner_type     = -1,
427                 .tuner_addr     = ADDR_UNSET,
428                 .radio_addr     = ADDR_UNSET,
429                 .audio_hook     = avermedia_tvphone_audio,
430                 .has_remote     = 1,
431         },
432         [BTTV_BOARD_MATRIX_VISION] = {
433                 .name           = "MATRIX-Vision MV-Delta",
434                 .video_inputs   = 5,
435                 .audio_inputs   = 1,
436                 .tuner          = -1,
437                 .svhs           = 3,
438                 .gpiomask       = 0,
439                 .muxsel         = { 2, 3, 1, 0, 0 },
440                 .gpiomux        = { 0 },
441                 .needs_tvaudio  = 1,
442                 .tuner_type     = -1,
443                 .tuner_addr     = ADDR_UNSET,
444                 .radio_addr     = ADDR_UNSET,
445         },
446
447         /* ---- card 0x08 ---------------------------------- */
448         [BTTV_BOARD_FLYVIDEO] = {
449                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
450                 .video_inputs   = 4,
451                 .audio_inputs   = 1,
452                 .tuner          = 0,
453                 .svhs           = 2,
454                 .gpiomask       = 0xc00,
455                 .muxsel         = { 2, 3, 1, 1 },
456                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
457                 .gpiomute       = 0xc00,
458                 .needs_tvaudio  = 1,
459                 .pll            = PLL_28,
460                 .tuner_type     = -1,
461                 .tuner_addr     = ADDR_UNSET,
462                 .radio_addr     = ADDR_UNSET,
463         },
464         [BTTV_BOARD_TURBOTV] = {
465                 .name           = "IMS/IXmicro TurboTV",
466                 .video_inputs   = 3,
467                 .audio_inputs   = 1,
468                 .tuner          = 0,
469                 .svhs           = 2,
470                 .gpiomask       = 3,
471                 .muxsel         = { 2, 3, 1, 1 },
472                 .gpiomux        = { 1, 1, 2, 3 },
473                 .needs_tvaudio  = 0,
474                 .pll            = PLL_28,
475                 .tuner_type     = TUNER_TEMIC_PAL,
476                 .tuner_addr     = ADDR_UNSET,
477                 .radio_addr     = ADDR_UNSET,
478         },
479         [BTTV_BOARD_HAUPPAUGE878] = {
480                 .name           = "Hauppauge (bt878)",
481                 .video_inputs   = 4,
482                 .audio_inputs   = 1,
483                 .tuner          = 0,
484                 .svhs           = 2,
485                 .gpiomask       = 0x0f, /* old: 7 */
486                 .muxsel         = { 2, 0, 1, 1 },
487                 .gpiomux        = { 0, 1, 2, 3 },
488                 .gpiomute       = 4,
489                 .needs_tvaudio  = 1,
490                 .pll            = PLL_28,
491                 .tuner_type     = -1,
492                 .tuner_addr     = ADDR_UNSET,
493                 .radio_addr     = ADDR_UNSET,
494         },
495         [BTTV_BOARD_MIROPRO] = {
496                 .name           = "MIRO PCTV pro",
497                 .video_inputs   = 3,
498                 .audio_inputs   = 1,
499                 .tuner          = 0,
500                 .svhs           = 2,
501                 .gpiomask       = 0x3014f,
502                 .muxsel         = { 2, 3, 1, 1 },
503                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
504                 .gpiomute       = 10,
505                 .needs_tvaudio  = 1,
506                 .tuner_type     = -1,
507                 .tuner_addr     = ADDR_UNSET,
508                 .radio_addr     = ADDR_UNSET,
509         },
510
511         /* ---- card 0x0c ---------------------------------- */
512         [BTTV_BOARD_ADSTECH_TV] = {
513                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
514                 .video_inputs   = 3,
515                 .audio_inputs   = 1,
516                 .tuner          = 0,
517                 .svhs           = 2,
518                 .gpiomask       = 15,
519                 .muxsel         = { 2, 3, 1, 1 },
520                 .gpiomux        = { 13, 14, 11, 7 },
521                 .needs_tvaudio  = 1,
522                 .tuner_type     = -1,
523                 .tuner_addr     = ADDR_UNSET,
524                 .radio_addr     = ADDR_UNSET,
525         },
526         [BTTV_BOARD_AVERMEDIA98] = {
527                 .name           = "AVerMedia TVCapture 98",
528                 .video_inputs   = 3,
529                 .audio_inputs   = 4,
530                 .tuner          = 0,
531                 .svhs           = 2,
532                 .gpiomask       = 15,
533                 .muxsel         = { 2, 3, 1, 1 },
534                 .gpiomux        = { 13, 14, 11, 7 },
535                 .needs_tvaudio  = 1,
536                 .msp34xx_alt    = 1,
537                 .pll            = PLL_28,
538                 .tuner_type     = TUNER_PHILIPS_PAL,
539                 .tuner_addr     = ADDR_UNSET,
540                 .radio_addr     = ADDR_UNSET,
541                 .audio_hook     = avermedia_tv_stereo_audio,
542                 .no_gpioirq     = 1,
543         },
544         [BTTV_BOARD_VHX] = {
545                 .name           = "Aimslab Video Highway Xtreme (VHX)",
546                 .video_inputs   = 3,
547                 .audio_inputs   = 1,
548                 .tuner          = 0,
549                 .svhs           = 2,
550                 .gpiomask       = 7,
551                 .muxsel         = { 2, 3, 1, 1 },
552                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
553                 .gpiomute       = 4,
554                 .needs_tvaudio  = 1,
555                 .pll            = PLL_28,
556                 .tuner_type     = -1,
557                 .tuner_addr     = ADDR_UNSET,
558                 .radio_addr     = ADDR_UNSET,
559         },
560         [BTTV_BOARD_ZOLTRIX] = {
561                 .name           = "Zoltrix TV-Max",
562                 .video_inputs   = 3,
563                 .audio_inputs   = 1,
564                 .tuner          = 0,
565                 .svhs           = 2,
566                 .gpiomask       = 15,
567                 .muxsel         = { 2, 3, 1, 1 },
568                 .gpiomux        = { 0, 0, 1, 0 },
569                 .gpiomute       = 10,
570                 .needs_tvaudio  = 1,
571                 .tuner_type     = -1,
572                 .tuner_addr     = ADDR_UNSET,
573                 .radio_addr     = ADDR_UNSET,
574         },
575
576         /* ---- card 0x10 ---------------------------------- */
577         [BTTV_BOARD_PIXVIEWPLAYTV] = {
578                 .name           = "Prolink Pixelview PlayTV (bt878)",
579                 .video_inputs   = 3,
580                 .audio_inputs   = 1,
581                 .tuner          = 0,
582                 .svhs           = 2,
583                 .gpiomask       = 0x01fe00,
584                 .muxsel         = { 2, 3, 1, 1 },
585                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
586                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
587                 .gpiomute       = 0x002000,
588                 .needs_tvaudio  = 1,
589                 .pll            = PLL_28,
590                 .tuner_type     = -1,
591         },
592         [BTTV_BOARD_WINVIEW_601] = {
593                 .name           = "Leadtek WinView 601",
594                 .video_inputs   = 3,
595                 .audio_inputs   = 1,
596                 .tuner          = 0,
597                 .svhs           = 2,
598                 .gpiomask       = 0x8300f8,
599                 .muxsel         = { 2, 3, 1, 1,0 },
600                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
601                 .gpiomute       = 0xcfa007,
602                 .needs_tvaudio  = 1,
603                 .tuner_type     = -1,
604                 .tuner_addr     = ADDR_UNSET,
605                 .radio_addr     = ADDR_UNSET,
606                 .audio_hook     = winview_audio,
607                 .has_radio      = 1,
608         },
609         [BTTV_BOARD_AVEC_INTERCAP] = {
610                 .name           = "AVEC Intercapture",
611                 .video_inputs   = 3,
612                 .audio_inputs   = 2,
613                 .tuner          = 0,
614                 .svhs           = 2,
615                 .gpiomask       = 0,
616                 .muxsel         = { 2, 3, 1, 1 },
617                 .gpiomux        = { 1, 0, 0, 0 },
618                 .needs_tvaudio  = 1,
619                 .tuner_type     = -1,
620                 .tuner_addr     = ADDR_UNSET,
621                 .radio_addr     = ADDR_UNSET,
622         },
623         [BTTV_BOARD_LIFE_FLYKIT] = {
624                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
625                 .video_inputs   = 4,
626                 .audio_inputs   = 1,
627                 .tuner          = -1,
628                 .svhs           = -1,
629                 .gpiomask       = 0x8dff00,
630                 .muxsel         = { 2, 3, 1, 1 },
631                 .gpiomux        = { 0 },
632                 .no_msp34xx     = 1,
633                 .tuner_type     = -1,
634                 .tuner_addr     = ADDR_UNSET,
635                 .radio_addr     = ADDR_UNSET,
636         },
637
638         /* ---- card 0x14 ---------------------------------- */
639         [BTTV_BOARD_CEI_RAFFLES] = {
640                 .name           = "CEI Raffles Card",
641                 .video_inputs   = 3,
642                 .audio_inputs   = 3,
643                 .tuner          = 0,
644                 .svhs           = 2,
645                 .muxsel         = { 2, 3, 1, 1 },
646                 .tuner_type     = -1,
647                 .tuner_addr     = ADDR_UNSET,
648                 .radio_addr     = ADDR_UNSET,
649         },
650         [BTTV_BOARD_CONFERENCETV] = {
651                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
652                 .video_inputs   = 4,
653                 .audio_inputs   = 2,  /* tuner, line in */
654                 .tuner          = 0,
655                 .svhs           = 2,
656                 .gpiomask       = 0x1800,
657                 .muxsel         = { 2, 3, 1, 1 },
658                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
659                 .gpiomute       = 0x1800,
660                 .pll            = PLL_28,
661                 .tuner_type     = TUNER_PHILIPS_PAL_I,
662                 .tuner_addr     = ADDR_UNSET,
663                 .radio_addr     = ADDR_UNSET,
664         },
665         [BTTV_BOARD_PHOEBE_TVMAS] = {
666                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
667                 .video_inputs   = 3,
668                 .audio_inputs   = 1,
669                 .tuner          = 0,
670                 .svhs           = 2,
671                 .gpiomask       = 0xc00,
672                 .muxsel         = { 2, 3, 1, 1 },
673                 .gpiomux        = { 0, 1, 0x800, 0x400 },
674                 .gpiomute       = 0xc00,
675                 .needs_tvaudio  = 1,
676                 .pll            = PLL_28,
677                 .tuner_type     = -1,
678                 .tuner_addr     = ADDR_UNSET,
679                 .radio_addr     = ADDR_UNSET,
680         },
681         [BTTV_BOARD_MODTEC_205] = {
682                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
683                 .video_inputs   = 3,
684                 .audio_inputs   = 1,
685                 .tuner          = 0,
686                 .svhs           = -1,
687                 .gpiomask       = 7,
688                 .muxsel         = { 2, 3, -1 },
689                 .digital_mode   = DIGITAL_MODE_CAMERA,
690                 .gpiomux        = { 0, 0, 0, 0 },
691                 .no_msp34xx     = 1,
692                 .pll            = PLL_28,
693                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
694                 .tuner_addr     = ADDR_UNSET,
695                 .radio_addr     = ADDR_UNSET,
696         },
697
698         /* ---- card 0x18 ---------------------------------- */
699         [BTTV_BOARD_MAGICTVIEW061] = {
700                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
701                 .video_inputs   = 3,
702                 .audio_inputs   = 1,
703                 .tuner          = 0,
704                 .svhs           = 2,
705                 .gpiomask       = 0xe00,
706                 .muxsel         = { 2, 3, 1, 1 },
707                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
708                 .gpiomute       = 0xc00,
709                 .needs_tvaudio  = 1,
710                 .pll            = PLL_28,
711                 .tuner_type     = -1,
712                 .tuner_addr     = ADDR_UNSET,
713                 .radio_addr     = ADDR_UNSET,
714                 .has_remote     = 1,
715         },
716         [BTTV_BOARD_VOBIS_BOOSTAR] = {
717                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
718                 .video_inputs   = 3,
719                 .audio_inputs   = 1,
720                 .tuner          = 0,
721                 .svhs           = 2,
722                 .gpiomask       = 0x1f0fff,
723                 .muxsel         = { 2, 3, 1, 1 },
724                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
725                 .gpiomute       = 0x40000,
726                 .needs_tvaudio  = 0,
727                 .tuner_type     = TUNER_PHILIPS_PAL,
728                 .tuner_addr     = ADDR_UNSET,
729                 .radio_addr     = ADDR_UNSET,
730                 .audio_hook     = terratv_audio,
731         },
732         [BTTV_BOARD_HAUPPAUG_WCAM] = {
733                 .name           = "Hauppauge WinCam newer (bt878)",
734                 .video_inputs   = 4,
735                 .audio_inputs   = 1,
736                 .tuner          = 0,
737                 .svhs           = 3,
738                 .gpiomask       = 7,
739                 .muxsel         = { 2, 0, 1, 1 },
740                 .gpiomux        = { 0, 1, 2, 3 },
741                 .gpiomute       = 4,
742                 .needs_tvaudio  = 1,
743                 .tuner_type     = -1,
744                 .tuner_addr     = ADDR_UNSET,
745                 .radio_addr     = ADDR_UNSET,
746         },
747         [BTTV_BOARD_MAXI] = {
748                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
749                 .video_inputs   = 4,
750                 .audio_inputs   = 2,
751                 .tuner          = 0,
752                 .svhs           = 2,
753                 .gpiomask       = 0x1800,
754                 .muxsel         = { 2, 3, 1, 1 },
755                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
756                 .gpiomute       = 0x1800,
757                 .pll            = PLL_28,
758                 .tuner_type     = TUNER_PHILIPS_SECAM,
759                 .tuner_addr     = ADDR_UNSET,
760                 .radio_addr     = ADDR_UNSET,
761         },
762
763         /* ---- card 0x1c ---------------------------------- */
764         [BTTV_BOARD_TERRATV] = {
765                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
766                 .video_inputs   = 3,
767                 .audio_inputs   = 1,
768                 .tuner          = 0,
769                 .svhs           = 2,
770                 .gpiomask       = 0x1f0fff,
771                 .muxsel         = { 2, 3, 1, 1 },
772                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
773                 .gpiomute       = 0x40000,
774                 .needs_tvaudio  = 0,
775                 .tuner_type     = TUNER_PHILIPS_PAL,
776                 .tuner_addr     = ADDR_UNSET,
777                 .radio_addr     = ADDR_UNSET,
778                 .audio_hook     = terratv_audio,
779                 /* GPIO wiring:
780                 External 20 pin connector (for Active Radio Upgrade board)
781                 gpio00: i2c-sda
782                 gpio01: i2c-scl
783                 gpio02: om5610-data
784                 gpio03: om5610-clk
785                 gpio04: om5610-wre
786                 gpio05: om5610-stereo
787                 gpio06: rds6588-davn
788                 gpio07: Pin 7 n.c.
789                 gpio08: nIOW
790                 gpio09+10: nIOR, nSEL ?? (bt878)
791                         gpio09: nIOR (bt848)
792                         gpio10: nSEL (bt848)
793                 Sound Routing:
794                 gpio16: u2-A0 (1st 4052bt)
795                 gpio17: u2-A1
796                 gpio18: u2-nEN
797                 gpio19: u4-A0 (2nd 4052)
798                 gpio20: u4-A1
799                         u4-nEN - GND
800                 Btspy:
801                         00000 : Cdrom (internal audio input)
802                         10000 : ext. Video audio input
803                         20000 : TV Mono
804                         a0000 : TV Mono/2
805                 1a0000 : TV Stereo
806                         30000 : Radio
807                         40000 : Mute
808         */
809
810         },
811         [BTTV_BOARD_PXC200] = {
812                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
813                 .name           = "Imagenation PXC200",
814                 .video_inputs   = 5,
815                 .audio_inputs   = 1,
816                 .tuner          = -1,
817                 .svhs           = 1, /* was: 4 */
818                 .gpiomask       = 0,
819                 .muxsel         = { 2, 3, 1, 0, 0},
820                 .gpiomux        = { 0 },
821                 .needs_tvaudio  = 1,
822                 .tuner_type     = -1,
823                 .tuner_addr     = ADDR_UNSET,
824                 .radio_addr     = ADDR_UNSET,
825                 .muxsel_hook    = PXC200_muxsel,
826
827         },
828         [BTTV_BOARD_FLYVIDEO_98] = {
829                 .name           = "Lifeview FlyVideo 98 LR50",
830                 .video_inputs   = 4,
831                 .audio_inputs   = 1,
832                 .tuner          = 0,
833                 .svhs           = 2,
834                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
835                 .muxsel         = { 2, 3, 1, 1 },
836                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
837                 .gpiomute       = 0x1800,
838                 .pll            = PLL_28,
839                 .tuner_type     = -1,
840                 .tuner_addr     = ADDR_UNSET,
841                 .radio_addr     = ADDR_UNSET,
842         },
843         [BTTV_BOARD_IPROTV] = {
844                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
845                 .video_inputs   = 4,
846                 .audio_inputs   = 1,
847                 .tuner          = 0,
848                 .svhs           = 3,
849                 .gpiomask       = 1,
850                 .muxsel         = { 2, 3, 1, 1 },
851                 .gpiomux        = { 1, 0, 0, 0 },
852                 .pll            = PLL_28,
853                 .tuner_type     = TUNER_PHILIPS_PAL,
854                 .tuner_addr     = ADDR_UNSET,
855                 .radio_addr     = ADDR_UNSET,
856         },
857
858         /* ---- card 0x20 ---------------------------------- */
859         [BTTV_BOARD_INTEL_C_S_PCI] = {
860                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
861                 .video_inputs   = 4,
862                 .audio_inputs   = 0,
863                 .tuner          = -1,
864                 .svhs           = 2,
865                 .gpiomask       = 0,
866                 .muxsel         = { 2, 3, 1, 1 },
867                 .gpiomux        = { 0 },
868                 .needs_tvaudio  = 0,
869                 .tuner_type     = 4,
870                 .tuner_addr     = ADDR_UNSET,
871                 .radio_addr     = ADDR_UNSET,
872         },
873         [BTTV_BOARD_TERRATVALUE] = {
874                 .name           = "Terratec TerraTValue Version Bt878",
875                 .video_inputs   = 3,
876                 .audio_inputs   = 1,
877                 .tuner          = 0,
878                 .svhs           = 2,
879                 .gpiomask       = 0xffff00,
880                 .muxsel         = { 2, 3, 1, 1 },
881                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
882                 .gpiomute       = 0x900,
883                 .needs_tvaudio  = 1,
884                 .pll            = PLL_28,
885                 .tuner_type     = TUNER_PHILIPS_PAL,
886                 .tuner_addr     = ADDR_UNSET,
887                 .radio_addr     = ADDR_UNSET,
888         },
889         [BTTV_BOARD_WINFAST2000] = {
890                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
891                 .video_inputs   = 4,
892                 .audio_inputs   = 1,
893                 .tuner          = 0,
894                 .svhs           = 2,
895                 .muxsel         = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
896                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
897                 .gpiomask       = 0xb33000,
898                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
899                 .gpiomute       = 0x800000,
900                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
901                         gpio23 -- hef4052:nEnable (0x800000)
902                         gpio12 -- hef4052:A1
903                         gpio13 -- hef4052:A0
904                 0x0000: external audio
905                 0x1000: FM
906                 0x2000: TV
907                 0x3000: n.c.
908                 Note: There exists another variant "Winfast 2000" with tv stereo !?
909                 Note: eeprom only contains FF and pci subsystem id 107d:6606
910                 */
911                 .needs_tvaudio  = 0,
912                 .pll            = PLL_28,
913                 .has_radio      = 1,
914                 .tuner_type     = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
915                 .tuner_addr     = ADDR_UNSET,
916                 .radio_addr     = ADDR_UNSET,
917                 .audio_hook     = winfast2000_audio,
918                 .has_remote     = 1,
919         },
920         [BTTV_BOARD_CHRONOS_VS2] = {
921                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
922                 .video_inputs   = 4,
923                 .audio_inputs   = 3,
924                 .tuner          = 0,
925                 .svhs           = 2,
926                 .gpiomask       = 0x1800,
927                 .muxsel         = { 2, 3, 1, 1 },
928                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
929                 .gpiomute       = 0x1800,
930                 .pll            = PLL_28,
931                 .tuner_type     = -1,
932                 .tuner_addr     = ADDR_UNSET,
933                 .radio_addr     = ADDR_UNSET,
934         },
935
936         /* ---- card 0x24 ---------------------------------- */
937         [BTTV_BOARD_TYPHOON_TVIEW] = {
938                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
939                 .video_inputs   = 4,
940                 .audio_inputs   = 3,
941                 .tuner          = 0,
942                 .svhs           = 2,
943                 .gpiomask       = 0x1800,
944                 .muxsel         = { 2, 3, 1, 1 },
945                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
946                 .gpiomute       = 0x1800,
947                 .pll            = PLL_28,
948                 .tuner_type     = -1,
949                 .tuner_addr     = ADDR_UNSET,
950                 .radio_addr     = ADDR_UNSET,
951                 .has_radio      = 1,
952         },
953         [BTTV_BOARD_PXELVWPLTVPRO] = {
954                 .name           = "Prolink PixelView PlayTV pro",
955                 .video_inputs   = 3,
956                 .audio_inputs   = 1,
957                 .tuner          = 0,
958                 .svhs           = 2,
959                 .gpiomask       = 0xff,
960                 .muxsel         = { 2, 3, 1, 1 },
961                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
962                 .gpiomute       = 0x29,
963                 .no_msp34xx     = 1,
964                 .pll            = PLL_28,
965                 .tuner_type     = -1,
966                 .tuner_addr     = ADDR_UNSET,
967                 .radio_addr     = ADDR_UNSET,
968         },
969         [BTTV_BOARD_MAGICTVIEW063] = {
970                 .name           = "Askey CPH06X TView99",
971                 .video_inputs   = 4,
972                 .audio_inputs   = 1,
973                 .tuner          = 0,
974                 .svhs           = 2,
975                 .gpiomask       = 0x551e00,
976                 .muxsel         = { 2, 3, 1, 0 },
977                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
978                 .gpiomute       = 0x551c00,
979                 .needs_tvaudio  = 1,
980                 .pll            = PLL_28,
981                 .tuner_type     = 1,
982                 .tuner_addr     = ADDR_UNSET,
983                 .radio_addr     = ADDR_UNSET,
984                 .has_remote     = 1,
985         },
986         [BTTV_BOARD_PINNACLE] = {
987                 .name           = "Pinnacle PCTV Studio/Rave",
988                 .video_inputs   = 3,
989                 .audio_inputs   = 1,
990                 .tuner          = 0,
991                 .svhs           = 2,
992                 .gpiomask       = 0x03000F,
993                 .muxsel         = { 2, 3, 1, 1 },
994                 .gpiomux        = { 2, 0xd0001, 0, 0 },
995                 .gpiomute       = 1,
996                 .needs_tvaudio  = 0,
997                 .pll            = PLL_28,
998                 .tuner_type     = -1,
999                 .tuner_addr     = ADDR_UNSET,
1000                 .radio_addr     = ADDR_UNSET,
1001         },
1002
1003         /* ---- card 0x28 ---------------------------------- */
1004         [BTTV_BOARD_STB2] = {
1005                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1006                 .video_inputs   = 3,
1007                 .audio_inputs   = 1,
1008                 .tuner          = 0,
1009                 .svhs           = 2,
1010                 .gpiomask       = 7,
1011                 .muxsel         = { 2, 3, 1, 1 },
1012                 .gpiomux        = { 4, 0, 2, 3 },
1013                 .gpiomute       = 1,
1014                 .no_msp34xx     = 1,
1015                 .needs_tvaudio  = 1,
1016                 .tuner_type     = TUNER_PHILIPS_NTSC,
1017                 .tuner_addr     = ADDR_UNSET,
1018                 .radio_addr     = ADDR_UNSET,
1019                 .pll            = PLL_28,
1020                 .has_radio      = 1,
1021         },
1022         [BTTV_BOARD_AVPHONE98] = {
1023                 .name           = "AVerMedia TVPhone 98",
1024                 .video_inputs   = 3,
1025                 .audio_inputs   = 4,
1026                 .tuner          = 0,
1027                 .svhs           = 2,
1028                 .gpiomask       = 15,
1029                 .muxsel         = { 2, 3, 1, 1 },
1030                 .gpiomux        = { 13, 4, 11, 7 },
1031                 .needs_tvaudio  = 1,
1032                 .pll            = PLL_28,
1033                 .tuner_type     = -1,
1034                 .tuner_addr     = ADDR_UNSET,
1035                 .radio_addr     = ADDR_UNSET,
1036                 .has_radio      = 1,
1037                 .audio_hook     = avermedia_tvphone_audio,
1038         },
1039         [BTTV_BOARD_PV951] = {
1040                 .name           = "ProVideo PV951", /* pic16c54 */
1041                 .video_inputs   = 3,
1042                 .audio_inputs   = 1,
1043                 .tuner          = 0,
1044                 .svhs           = 2,
1045                 .gpiomask       = 0,
1046                 .muxsel         = { 2, 3, 1, 1},
1047                 .gpiomux        = { 0, 0, 0, 0},
1048                 .needs_tvaudio  = 1,
1049                 .no_msp34xx     = 1,
1050                 .pll            = PLL_28,
1051                 .tuner_type     = 1,
1052                 .tuner_addr     = ADDR_UNSET,
1053                 .radio_addr     = ADDR_UNSET,
1054         },
1055         [BTTV_BOARD_ONAIR_TV] = {
1056                 .name           = "Little OnAir TV",
1057                 .video_inputs   = 3,
1058                 .audio_inputs   = 1,
1059                 .tuner          = 0,
1060                 .svhs           = 2,
1061                 .gpiomask       = 0xe00b,
1062                 .muxsel         = { 2, 3, 1, 1 },
1063                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1064                 .gpiomute       = 0xff3ffc,
1065                 .no_msp34xx     = 1,
1066                 .tuner_type     = -1,
1067                 .tuner_addr     = ADDR_UNSET,
1068                 .radio_addr     = ADDR_UNSET,
1069         },
1070
1071         /* ---- card 0x2c ---------------------------------- */
1072         [BTTV_BOARD_SIGMA_TVII_FM] = {
1073                 .name           = "Sigma TVII-FM",
1074                 .video_inputs   = 2,
1075                 .audio_inputs   = 1,
1076                 .tuner          = 0,
1077                 .svhs           = -1,
1078                 .gpiomask       = 3,
1079                 .muxsel         = { 2, 3, 1, 1 },
1080                 .gpiomux        = { 1, 1, 0, 2 },
1081                 .gpiomute       = 3,
1082                 .no_msp34xx     = 1,
1083                 .pll            = PLL_NONE,
1084                 .tuner_type     = -1,
1085                 .tuner_addr     = ADDR_UNSET,
1086                 .radio_addr     = ADDR_UNSET,
1087         },
1088         [BTTV_BOARD_MATRIX_VISION2] = {
1089                 .name           = "MATRIX-Vision MV-Delta 2",
1090                 .video_inputs   = 5,
1091                 .audio_inputs   = 1,
1092                 .tuner          = -1,
1093                 .svhs           = 3,
1094                 .gpiomask       = 0,
1095                 .muxsel         = { 2, 3, 1, 0, 0 },
1096                 .gpiomux        = { 0 },
1097                 .no_msp34xx     = 1,
1098                 .pll            = PLL_28,
1099                 .tuner_type     = -1,
1100                 .tuner_addr     = ADDR_UNSET,
1101                 .radio_addr     = ADDR_UNSET,
1102         },
1103         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1104                 .name           = "Zoltrix Genie TV/FM",
1105                 .video_inputs   = 3,
1106                 .audio_inputs   = 1,
1107                 .tuner          = 0,
1108                 .svhs           = 2,
1109                 .gpiomask       = 0xbcf03f,
1110                 .muxsel         = { 2, 3, 1, 1 },
1111                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1112                 .gpiomute       = 0xbcb03f,
1113                 .no_msp34xx     = 1,
1114                 .pll            = PLL_28,
1115                 .tuner_type     = 21,
1116                 .tuner_addr     = ADDR_UNSET,
1117                 .radio_addr     = ADDR_UNSET,
1118         },
1119         [BTTV_BOARD_TERRATVRADIO] = {
1120                 .name           = "Terratec TV/Radio+",
1121                 .video_inputs   = 3,
1122                 .audio_inputs   = 1,
1123                 .tuner          = 0,
1124                 .svhs           = 2,
1125                 .gpiomask       = 0x70000,
1126                 .muxsel         = { 2, 3, 1, 1 },
1127                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1128                 .gpiomute       = 0x40000,
1129                 .needs_tvaudio  = 1,
1130                 .no_msp34xx     = 1,
1131                 .pll            = PLL_35,
1132                 .tuner_type     = 1,
1133                 .tuner_addr     = ADDR_UNSET,
1134                 .radio_addr     = ADDR_UNSET,
1135                 .has_radio      = 1,
1136         },
1137
1138         /* ---- card 0x30 ---------------------------------- */
1139         [BTTV_BOARD_DYNALINK] = {
1140                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1141                 .video_inputs   = 3,
1142                 .audio_inputs   = 1,
1143                 .tuner          = 0,
1144                 .svhs           = 2,
1145                 .gpiomask       = 15,
1146                 .muxsel         = { 2, 3, 1, 1 },
1147                 .gpiomux        = {2,0,0,0 },
1148                 .gpiomute       = 1,
1149                 .needs_tvaudio  = 1,
1150                 .pll            = PLL_28,
1151                 .tuner_type     = -1,
1152                 .tuner_addr     = ADDR_UNSET,
1153                 .radio_addr     = ADDR_UNSET,
1154         },
1155         [BTTV_BOARD_GVBCTV3PCI] = {
1156                 .name           = "IODATA GV-BCTV3/PCI",
1157                 .video_inputs   = 3,
1158                 .audio_inputs   = 1,
1159                 .tuner          = 0,
1160                 .svhs           = 2,
1161                 .gpiomask       = 0x010f00,
1162                 .muxsel         = {2, 3, 0, 0 },
1163                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1164                 .no_msp34xx     = 1,
1165                 .pll            = PLL_28,
1166                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1167                 .tuner_addr     = ADDR_UNSET,
1168                 .radio_addr     = ADDR_UNSET,
1169                 .audio_hook     = gvbctv3pci_audio,
1170         },
1171         [BTTV_BOARD_PXELVWPLTVPAK] = {
1172                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1173                 .video_inputs   = 5,
1174                 .audio_inputs   = 1,
1175                 .tuner          = 0,
1176                 .svhs           = 3,
1177                 .gpiomask       = 0xAA0000,
1178                 .muxsel         = { 2,3,1,1,-1 },
1179                 .digital_mode   = DIGITAL_MODE_CAMERA,
1180                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1181                 .gpiomute       = 0xa8000,
1182                 .no_msp34xx     = 1,
1183                 .pll            = PLL_28,
1184                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1185                 .tuner_addr     = ADDR_UNSET,
1186                 .radio_addr     = ADDR_UNSET,
1187                 .has_remote     = 1,
1188                 /* GPIO wiring: (different from Rev.4C !)
1189                         GPIO17: U4.A0 (first hef4052bt)
1190                         GPIO19: U4.A1
1191                         GPIO20: U5.A1 (second hef4052bt)
1192                         GPIO21: U4.nEN
1193                         GPIO22: BT832 Reset Line
1194                         GPIO23: A5,A0, U5,nEN
1195                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1196                 */
1197         },
1198         [BTTV_BOARD_EAGLE] = {
1199                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1200                 .video_inputs   = 4,
1201                 .audio_inputs   = 1,
1202                 .tuner          = 0,
1203                 .svhs           = 2,
1204                 .gpiomask       = 7,
1205                 .muxsel         = { 2, 0, 1, 1 },
1206                 .gpiomux        = { 0, 1, 2, 3 },
1207                 .gpiomute       = 4,
1208                 .pll            = PLL_28,
1209                 .tuner_type     = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1210                 .tuner_addr     = ADDR_UNSET,
1211                 .radio_addr     = ADDR_UNSET,
1212         },
1213
1214         /* ---- card 0x34 ---------------------------------- */
1215         [BTTV_BOARD_PINNACLEPRO] = {
1216                 /* David Härdeman <david@2gen.com> */
1217                 .name           = "Pinnacle PCTV Studio Pro",
1218                 .video_inputs   = 4,
1219                 .audio_inputs   = 1,
1220                 .tuner          = 0,
1221                 .svhs           = 3,
1222                 .gpiomask       = 0x03000F,
1223                 .muxsel         = { 2, 3, 1, 1 },
1224                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1225                 .gpiomute       = 10,
1226                                 /* sound path (5 sources):
1227                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1228                                         0= ext. Audio IN
1229                                         1= from MUX2
1230                                         2= Mono TV sound from Tuner
1231                                         3= not connected
1232                                 MUX2 (mask 0x30000):
1233                                         0,2,3= from MSP34xx
1234                                         1= FM stereo Radio from Tuner */
1235                 .needs_tvaudio  = 0,
1236                 .pll            = PLL_28,
1237                 .tuner_type     = -1,
1238                 .tuner_addr     = ADDR_UNSET,
1239                 .radio_addr     = ADDR_UNSET,
1240         },
1241         [BTTV_BOARD_TVIEW_RDS_FM] = {
1242                 /* Claas Langbehn <claas@bigfoot.com>,
1243                 Sven Grothklags <sven@upb.de> */
1244                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1245                 .video_inputs   = 4,
1246                 .audio_inputs   = 3,
1247                 .tuner          = 0,
1248                 .svhs           = 2,
1249                 .gpiomask       = 0x1c,
1250                 .muxsel         = { 2, 3, 1, 1 },
1251                 .gpiomux        = { 0, 0, 0x10, 8 },
1252                 .gpiomute       = 4,
1253                 .needs_tvaudio  = 1,
1254                 .pll            = PLL_28,
1255                 .tuner_type     = TUNER_PHILIPS_PAL,
1256                 .tuner_addr     = ADDR_UNSET,
1257                 .radio_addr     = ADDR_UNSET,
1258                 .has_radio      = 1,
1259         },
1260         [BTTV_BOARD_LIFETEC_9415] = {
1261                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1262                 in de.comp.os.unix.linux.hardware:
1263                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1264                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1265                         options tuner type=5 */
1266                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1267                 .video_inputs   = 4,
1268                 .audio_inputs   = 1,
1269                 .tuner          = 0,
1270                 .svhs           = 2,
1271                 .gpiomask       = 0x18e0,
1272                 .muxsel         = { 2, 3, 1, 1 },
1273                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1274                 .gpiomute       = 0x18e0,
1275                         /* For cards with tda9820/tda9821:
1276                                 0x0000: Tuner normal stereo
1277                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1278                                 0x0880: Tuner A2 stereo */
1279                 .pll            = PLL_28,
1280                 .tuner_type     = -1,
1281                 .tuner_addr     = ADDR_UNSET,
1282                 .radio_addr     = ADDR_UNSET,
1283         },
1284         [BTTV_BOARD_BESTBUY_EASYTV] = {
1285                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1286                 old Easy TV BT848 version (model CPH031) */
1287                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1288                 .video_inputs   = 4,
1289                 .audio_inputs   = 1,
1290                 .tuner          = 0,
1291                 .svhs           = 2,
1292                 .gpiomask       = 0xF,
1293                 .muxsel         = { 2, 3, 1, 0 },
1294                 .gpiomux        = { 2, 0, 0, 0 },
1295                 .gpiomute       = 10,
1296                 .needs_tvaudio  = 0,
1297                 .pll            = PLL_28,
1298                 .tuner_type     = TUNER_TEMIC_PAL,
1299                 .tuner_addr     = ADDR_UNSET,
1300                 .radio_addr     = ADDR_UNSET,
1301         },
1302
1303         /* ---- card 0x38 ---------------------------------- */
1304         [BTTV_BOARD_FLYVIDEO_98FM] = {
1305                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1306                 .name           = "Lifeview FlyVideo 98FM LR50",
1307                 .video_inputs   = 4,
1308                 .audio_inputs   = 3,
1309                 .tuner          = 0,
1310                 .svhs           = 2,
1311                 .gpiomask       = 0x1800,
1312                 .muxsel         = { 2, 3, 1, 1 },
1313                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1314                 .gpiomute       = 0x1800,
1315                 .pll            = PLL_28,
1316                 .tuner_type     = 5,
1317                 .tuner_addr     = ADDR_UNSET,
1318                 .radio_addr     = ADDR_UNSET,
1319         },
1320                 /* This is the ultimate cheapo capture card
1321                 * just a BT848A on a small PCB!
1322                 * Steve Hosgood <steve@equiinet.com> */
1323         [BTTV_BOARD_GRANDTEC] = {
1324                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1325                 .video_inputs   = 2,
1326                 .audio_inputs   = 0,
1327                 .tuner          = -1,
1328                 .svhs           = 1,
1329                 .gpiomask       = 0,
1330                 .muxsel         = { 3, 1 },
1331                 .gpiomux        = { 0 },
1332                 .needs_tvaudio  = 0,
1333                 .no_msp34xx     = 1,
1334                 .pll            = PLL_35,
1335                 .tuner_type     = -1,
1336                 .tuner_addr     = ADDR_UNSET,
1337                 .radio_addr     = ADDR_UNSET,
1338         },
1339         [BTTV_BOARD_ASKEY_CPH060] = {
1340                 /* Daniel Herrington <daniel.herrington@home.com> */
1341                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1342                 .video_inputs   = 3,
1343                 .audio_inputs   = 1,
1344                 .tuner          = 0,
1345                 .svhs           = 2,
1346                 .gpiomask       = 0xe00,
1347                 .muxsel         = { 2, 3, 1, 1},
1348                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1349                 .gpiomute       = 0x800,
1350                 .needs_tvaudio  = 1,
1351                 .pll            = PLL_28,
1352                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1353                 .tuner_addr     = ADDR_UNSET,
1354                 .radio_addr     = ADDR_UNSET,
1355         },
1356         [BTTV_BOARD_ASKEY_CPH03X] = {
1357                 /* Matti Mottus <mottus@physic.ut.ee> */
1358                 .name           = "Askey CPH03x TV Capturer",
1359                 .video_inputs   = 4,
1360                 .audio_inputs   = 1,
1361                 .tuner          = 0,
1362                 .svhs           = 2,
1363                 .gpiomask       = 0x03000F,
1364                 .muxsel         = { 2, 3, 1, 0 },
1365                 .gpiomux        = { 2, 0, 0, 0 },
1366                 .gpiomute       = 1,
1367                 .pll            = PLL_28,
1368                 .tuner_type     = 0,
1369                 .tuner_addr     = ADDR_UNSET,
1370                 .radio_addr     = ADDR_UNSET,
1371         },
1372
1373         /* ---- card 0x3c ---------------------------------- */
1374         [BTTV_BOARD_MM100PCTV] = {
1375                 /* Philip Blundell <philb@gnu.org> */
1376                 .name           = "Modular Technology MM100PCTV",
1377                 .video_inputs   = 2,
1378                 .audio_inputs   = 2,
1379                 .tuner          = 0,
1380                 .svhs           = -1,
1381                 .gpiomask       = 11,
1382                 .muxsel         = { 2, 3, 1, 1 },
1383                 .gpiomux        = { 2, 0, 0, 1 },
1384                 .gpiomute       = 8,
1385                 .pll            = PLL_35,
1386                 .tuner_type     = TUNER_TEMIC_PAL,
1387                 .tuner_addr     = ADDR_UNSET,
1388                 .radio_addr     = ADDR_UNSET,
1389         },
1390         [BTTV_BOARD_GMV1] = {
1391                 /* Adrian Cox <adrian@humboldt.co.uk */
1392                 .name           = "AG Electronics GMV1",
1393                 .video_inputs   = 2,
1394                 .audio_inputs   = 0,
1395                 .tuner          = -1,
1396                 .svhs           = 1,
1397                 .gpiomask       = 0xF,
1398                 .muxsel         = { 2, 2 },
1399                 .gpiomux        = { },
1400                 .no_msp34xx     = 1,
1401                 .needs_tvaudio  = 0,
1402                 .pll            = PLL_28,
1403                 .tuner_type     = -1,
1404                 .tuner_addr     = ADDR_UNSET,
1405                 .radio_addr     = ADDR_UNSET,
1406         },
1407         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1408                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1409                 new Easy TV BT878 version (model CPH061)
1410                 special thanks to Informatica Mieres for providing the card */
1411                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1412                 .video_inputs   = 3,
1413                 .audio_inputs   = 2,
1414                 .tuner          = 0,
1415                 .svhs           = 2,
1416                 .gpiomask       = 0xFF,
1417                 .muxsel         = { 2, 3, 1, 0 },
1418                 .gpiomux        = { 1, 0, 4, 4 },
1419                 .gpiomute       = 9,
1420                 .needs_tvaudio  = 0,
1421                 .pll            = PLL_28,
1422                 .tuner_type     = TUNER_PHILIPS_PAL,
1423                 .tuner_addr     = ADDR_UNSET,
1424                 .radio_addr     = ADDR_UNSET,
1425         },
1426         [BTTV_BOARD_ATI_TVWONDER] = {
1427                 /* Lukas Gebauer <geby@volny.cz> */
1428                 .name           = "ATI TV-Wonder",
1429                 .video_inputs   = 3,
1430                 .audio_inputs   = 1,
1431                 .tuner          = 0,
1432                 .svhs           = 2,
1433                 .gpiomask       = 0xf03f,
1434                 .muxsel         = { 2, 3, 1, 0 },
1435                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1436                 .gpiomute       = 0xbffe,
1437                 .pll            = PLL_28,
1438                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1439                 .tuner_addr     = ADDR_UNSET,
1440                 .radio_addr     = ADDR_UNSET,
1441         },
1442
1443         /* ---- card 0x40 ---------------------------------- */
1444         [BTTV_BOARD_ATI_TVWONDERVE] = {
1445                 /* Lukas Gebauer <geby@volny.cz> */
1446                 .name           = "ATI TV-Wonder VE",
1447                 .video_inputs   = 2,
1448                 .audio_inputs   = 1,
1449                 .tuner          = 0,
1450                 .svhs           = -1,
1451                 .gpiomask       = 1,
1452                 .muxsel         = { 2, 3, 0, 1 },
1453                 .gpiomux        = { 0, 0, 1, 0 },
1454                 .no_msp34xx     = 1,
1455                 .pll            = PLL_28,
1456                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1457                 .tuner_addr     = ADDR_UNSET,
1458                 .radio_addr     = ADDR_UNSET,
1459         },
1460         [BTTV_BOARD_FLYVIDEO2000] = {
1461                 /* DeeJay <deejay@westel900.net (2000S) */
1462                 .name           = "Lifeview FlyVideo 2000S LR90",
1463                 .video_inputs   = 3,
1464                 .audio_inputs   = 3,
1465                 .tuner          = 0,
1466                 .svhs           = 2,
1467                 .gpiomask       = 0x18e0,
1468                 .muxsel         = { 2, 3, 0, 1 },
1469                                 /* Radio changed from 1e80 to 0x800 to make
1470                                 FlyVideo2000S in .hu happy (gm)*/
1471                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1472                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1473                 .gpiomute       = 0x1800,
1474                 .audio_hook     = fv2000s_audio,
1475                 .no_msp34xx     = 1,
1476                 .no_tda9875     = 1,
1477                 .needs_tvaudio  = 1,
1478                 .pll            = PLL_28,
1479                 .tuner_type     = 5,
1480                 .tuner_addr     = ADDR_UNSET,
1481                 .radio_addr     = ADDR_UNSET,
1482         },
1483         [BTTV_BOARD_TERRATVALUER] = {
1484                 .name           = "Terratec TValueRadio",
1485                 .video_inputs   = 3,
1486                 .audio_inputs   = 1,
1487                 .tuner          = 0,
1488                 .svhs           = 2,
1489                 .gpiomask       = 0xffff00,
1490                 .muxsel         = { 2, 3, 1, 1 },
1491                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1492                 .gpiomute       = 0x900,
1493                 .needs_tvaudio  = 1,
1494                 .pll            = PLL_28,
1495                 .tuner_type     = TUNER_PHILIPS_PAL,
1496                 .tuner_addr     = ADDR_UNSET,
1497                 .radio_addr     = ADDR_UNSET,
1498                 .has_radio      = 1,
1499         },
1500         [BTTV_BOARD_GVBCTV4PCI] = {
1501                 /* TANAKA Kei <peg00625@nifty.com> */
1502                 .name           = "IODATA GV-BCTV4/PCI",
1503                 .video_inputs   = 3,
1504                 .audio_inputs   = 1,
1505                 .tuner          = 0,
1506                 .svhs           = 2,
1507                 .gpiomask       = 0x010f00,
1508                 .muxsel         = {2, 3, 0, 0 },
1509                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1510                 .no_msp34xx     = 1,
1511                 .pll            = PLL_28,
1512                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1513                 .tuner_addr     = ADDR_UNSET,
1514                 .radio_addr     = ADDR_UNSET,
1515                 .audio_hook     = gvbctv3pci_audio,
1516         },
1517
1518         /* ---- card 0x44 ---------------------------------- */
1519         [BTTV_BOARD_VOODOOTV_FM] = {
1520                 .name           = "3Dfx VoodooTV FM (Euro)",
1521                 /* try "insmod msp3400 simple=0" if you have
1522                 * sound problems with this card. */
1523                 .video_inputs   = 4,
1524                 .audio_inputs   = 1,
1525                 .tuner          = 0,
1526                 .svhs           = -1,
1527                 .gpiomask       = 0x4f8a00,
1528                 /* 0x100000: 1=MSP enabled (0=disable again)
1529                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1530                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1531                 .gpiomute       = 0x947fff,
1532                 /* tvtuner, radio,   external,internal, mute,  stereo
1533                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1534                 .muxsel         = { 2, 3 ,0 ,1 },
1535                 .tuner_type     = TUNER_MT2032,
1536                 .tuner_addr     = ADDR_UNSET,
1537                 .radio_addr     = ADDR_UNSET,
1538                 .pll            = PLL_28,
1539                 .has_radio      = 1,
1540         },
1541         [BTTV_BOARD_VOODOOTV_200] = {
1542                 .name           = "VoodooTV 200 (USA)",
1543                 /* try "insmod msp3400 simple=0" if you have
1544                 * sound problems with this card. */
1545                 .video_inputs   = 4,
1546                 .audio_inputs   = 1,
1547                 .tuner          = 0,
1548                 .svhs           = -1,
1549                 .gpiomask       = 0x4f8a00,
1550                 /* 0x100000: 1=MSP enabled (0=disable again)
1551                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1552                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1553                 .gpiomute       = 0x947fff,
1554                 /* tvtuner, radio,   external,internal, mute,  stereo
1555                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1556                 .muxsel         = { 2, 3 ,0 ,1 },
1557                 .tuner_type     = TUNER_MT2032,
1558                 .tuner_addr     = ADDR_UNSET,
1559                 .radio_addr     = ADDR_UNSET,
1560                 .pll            = PLL_28,
1561                 .has_radio      = 1,
1562         },
1563         [BTTV_BOARD_AIMMS] = {
1564                 /* Philip Blundell <pb@nexus.co.uk> */
1565                 .name           = "Active Imaging AIMMS",
1566                 .video_inputs   = 1,
1567                 .audio_inputs   = 0,
1568                 .tuner          = -1,
1569                 .tuner_type     = -1,
1570                 .tuner_addr     = ADDR_UNSET,
1571                 .radio_addr     = ADDR_UNSET,
1572                 .pll            = PLL_28,
1573                 .muxsel         = { 2 },
1574                 .gpiomask       = 0
1575         },
1576         [BTTV_BOARD_PV_BT878P_PLUS] = {
1577                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1578                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1579                 .video_inputs   = 3,
1580                 .audio_inputs   = 4,
1581                 .tuner          = 0,
1582                 .svhs           = 2,
1583                 .gpiomask       = 15,
1584                 .muxsel         = { 2, 3, 1, 1 },
1585                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1586                 .gpiomute       = 13,
1587                 .needs_tvaudio  = 1,
1588                 .pll            = PLL_28,
1589                 .tuner_type     = 25,
1590                 .tuner_addr     = ADDR_UNSET,
1591                 .radio_addr     = ADDR_UNSET,
1592                 .has_remote     = 1,
1593                 /* GPIO wiring:
1594                         GPIO0: U4.A0 (hef4052bt)
1595                         GPIO1: U4.A1
1596                         GPIO2: U4.A1 (second hef4052bt)
1597                         GPIO3: U4.nEN, U5.A0, A5.nEN
1598                         GPIO8-15: vrd866b ?
1599                 */
1600         },
1601         [BTTV_BOARD_FLYVIDEO98EZ] = {
1602                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1603                 .video_inputs   = 4,
1604                 .audio_inputs   = 0,
1605                 .tuner          = -1,
1606                 .svhs           = 2,
1607                 .muxsel         = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1608                 .pll            = PLL_28,
1609                 .no_msp34xx     = 1,
1610                 .tuner_type     = UNSET,
1611                 .tuner_addr     = ADDR_UNSET,
1612                 .radio_addr     = ADDR_UNSET,
1613         },
1614
1615         /* ---- card 0x48 ---------------------------------- */
1616         [BTTV_BOARD_PV_BT878P_9B] = {
1617                 /* Dariusz Kowalewski <darekk@automex.pl> */
1618                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1619                 .video_inputs   = 4,
1620                 .audio_inputs   = 1,
1621                 .tuner          = 0,
1622                 .svhs           = 2,
1623                 .gpiomask       = 0x3f,
1624                 .muxsel         = { 2, 3, 1, 1 },
1625                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1626                 .gpiomute       = 0x09,
1627                 .needs_tvaudio  = 1,
1628                 .no_msp34xx     = 1,
1629                 .no_tda9875     = 1,
1630                 .pll            = PLL_28,
1631                 .tuner_type     = 5,
1632                 .tuner_addr     = ADDR_UNSET,
1633                 .radio_addr     = ADDR_UNSET,
1634                 .audio_hook     = pvbt878p9b_audio, /* Note: not all cards have stereo */
1635                 .has_radio      = 1,  /* Note: not all cards have radio */
1636                 .has_remote     = 1,
1637                 /* GPIO wiring:
1638                         GPIO0: A0 hef4052
1639                         GPIO1: A1 hef4052
1640                         GPIO3: nEN hef4052
1641                         GPIO8-15: vrd866b
1642                         GPIO20,22,23: R30,R29,R28
1643                 */
1644         },
1645         [BTTV_BOARD_SENSORAY311] = {
1646                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1647                 /* you must jumper JP5 for the card to work */
1648                 .name           = "Sensoray 311",
1649                 .video_inputs   = 5,
1650                 .audio_inputs   = 0,
1651                 .tuner          = -1,
1652                 .svhs           = 4,
1653                 .gpiomask       = 0,
1654                 .muxsel         = { 2, 3, 1, 0, 0 },
1655                 .gpiomux        = { 0 },
1656                 .needs_tvaudio  = 0,
1657                 .tuner_type     = -1,
1658                 .tuner_addr     = ADDR_UNSET,
1659                 .radio_addr     = ADDR_UNSET,
1660         },
1661         [BTTV_BOARD_RV605] = {
1662                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1663                 .name           = "RemoteVision MX (RV605)",
1664                 .video_inputs   = 16,
1665                 .audio_inputs   = 0,
1666                 .tuner          = -1,
1667                 .svhs           = -1,
1668                 .gpiomask       = 0x00,
1669                 .gpiomask2      = 0x07ff,
1670                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1671                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1672                 .no_msp34xx     = 1,
1673                 .no_tda9875     = 1,
1674                 .tuner_type     = -1,
1675                 .tuner_addr     = ADDR_UNSET,
1676                 .radio_addr     = ADDR_UNSET,
1677                 .muxsel_hook    = rv605_muxsel,
1678         },
1679         [BTTV_BOARD_POWERCLR_MTV878] = {
1680                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1681                 .video_inputs   = 3,
1682                 .audio_inputs   = 2,
1683                 .tuner          = 0,
1684                 .svhs           = 2,
1685                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1686                 .muxsel         = { 2, 1, 1, },
1687                 .gpiomux        = { 0, 1, 2, 2 },
1688                 .gpiomute       = 4,
1689                 .needs_tvaudio  = 0,
1690                 .tuner_type     = TUNER_PHILIPS_PAL,
1691                 .tuner_addr     = ADDR_UNSET,
1692                 .radio_addr     = ADDR_UNSET,
1693                 .pll            = PLL_28,
1694                 .has_radio      = 1,
1695         },
1696
1697         /* ---- card 0x4c ---------------------------------- */
1698         [BTTV_BOARD_WINDVR] = {
1699                 /* Masaki Suzuki <masaki@btree.org> */
1700                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1701                 .video_inputs   = 3,
1702                 .audio_inputs   = 1,
1703                 .tuner          = 0,
1704                 .svhs           = 2,
1705                 .gpiomask       = 0x140007,
1706                 .muxsel         = { 2, 3, 1, 1 },
1707                 .gpiomux        = { 0, 1, 2, 3 },
1708                 .gpiomute       = 4,
1709                 .tuner_type     = TUNER_PHILIPS_NTSC,
1710                 .tuner_addr     = ADDR_UNSET,
1711                 .radio_addr     = ADDR_UNSET,
1712                 .audio_hook     = windvr_audio,
1713         },
1714         [BTTV_BOARD_GRANDTEC_MULTI] = {
1715                 .name           = "GrandTec Multi Capture Card (Bt878)",
1716                 .video_inputs   = 4,
1717                 .audio_inputs   = 0,
1718                 .tuner          = -1,
1719                 .svhs           = -1,
1720                 .gpiomask       = 0,
1721                 .muxsel         = { 2, 3, 1, 0 },
1722                 .gpiomux        = { 0 },
1723                 .needs_tvaudio  = 0,
1724                 .no_msp34xx     = 1,
1725                 .pll            = PLL_28,
1726                 .tuner_type     = -1,
1727                 .tuner_addr     = ADDR_UNSET,
1728                 .radio_addr     = ADDR_UNSET,
1729         },
1730         [BTTV_BOARD_KWORLD] = {
1731                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1732                 .video_inputs   = 4,
1733                 .audio_inputs   = 3,
1734                 .tuner          = 0,
1735                 .svhs           = 2,
1736                 .gpiomask       = 7,
1737                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1738                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1739                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1740                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1741                                                 * This card lacks PCI subsystem ID, sigh.
1742                                                 * gpiomux =1: lower volume, 2+3: mute
1743                                                 * btwincap uses 0x80000/0x80003
1744                                                 */
1745                 .gpiomute       = 4,
1746                 .needs_tvaudio  = 0,
1747                 .no_msp34xx     = 1,
1748                 .pll            = PLL_28,
1749                 .tuner_type     = 5,
1750                 .tuner_addr     = ADDR_UNSET,
1751                 .radio_addr     = ADDR_UNSET,
1752                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1753                 radio signal strength indicators work fine. */
1754                 .has_radio      = 1,
1755                 /* GPIO Info:
1756                         GPIO0,1:   HEF4052 A0,A1
1757                         GPIO2:     HEF4052 nENABLE
1758                         GPIO3-7:   n.c.
1759                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1760                         GPIO14,15: ??
1761                         GPIO16-21: n.c.
1762                         GPIO22,23: ??
1763                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1764         },
1765         [BTTV_BOARD_DSP_TCVIDEO] = {
1766                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1767                 .name           = "DSP Design TCVIDEO",
1768                 .video_inputs   = 4,
1769                 .svhs           = -1,
1770                 .muxsel         = { 2, 3, 1, 0 },
1771                 .pll            = PLL_28,
1772                 .tuner_type     = -1,
1773                 .tuner_addr     = ADDR_UNSET,
1774                 .radio_addr     = ADDR_UNSET,
1775         },
1776
1777                 /* ---- card 0x50 ---------------------------------- */
1778         [BTTV_BOARD_HAUPPAUGEPVR] = {
1779                 .name           = "Hauppauge WinTV PVR",
1780                 .video_inputs   = 4,
1781                 .audio_inputs   = 1,
1782                 .tuner          = 0,
1783                 .svhs           = 2,
1784                 .muxsel         = { 2, 0, 1, 1 },
1785                 .needs_tvaudio  = 1,
1786                 .pll            = PLL_28,
1787                 .tuner_type     = -1,
1788                 .tuner_addr     = ADDR_UNSET,
1789                 .radio_addr     = ADDR_UNSET,
1790
1791                 .gpiomask       = 7,
1792                 .gpiomux        = {7},
1793         },
1794         [BTTV_BOARD_GVBCTV5PCI] = {
1795                 .name           = "IODATA GV-BCTV5/PCI",
1796                 .video_inputs   = 3,
1797                 .audio_inputs   = 1,
1798                 .tuner          = 0,
1799                 .svhs           = 2,
1800                 .gpiomask       = 0x0f0f80,
1801                 .muxsel         = {2, 3, 1, 0 },
1802                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1803                 .gpiomute       = 0x020000,
1804                 .no_msp34xx     = 1,
1805                 .pll            = PLL_28,
1806                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1807                 .tuner_addr     = ADDR_UNSET,
1808                 .radio_addr     = ADDR_UNSET,
1809                 .audio_hook     = gvbctv5pci_audio,
1810                 .has_radio      = 1,
1811         },
1812         [BTTV_BOARD_OSPREY1x0] = {
1813                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1814                 .video_inputs   = 4,                  /* id-inputs-clock */
1815                 .audio_inputs   = 0,
1816                 .tuner          = -1,
1817                 .svhs           = 3,
1818                 .muxsel         = { 3, 2, 0, 1 },
1819                 .pll            = PLL_28,
1820                 .tuner_type     = -1,
1821                 .tuner_addr     = ADDR_UNSET,
1822                 .radio_addr     = ADDR_UNSET,
1823                 .no_msp34xx     = 1,
1824                 .no_tda9875     = 1,
1825                 .no_tda7432     = 1,
1826         },
1827         [BTTV_BOARD_OSPREY1x0_848] = {
1828                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1829                 .video_inputs   = 3,
1830                 .audio_inputs   = 0,
1831                 .tuner          = -1,
1832                 .svhs           = 2,
1833                 .muxsel         = { 2, 3, 1 },
1834                 .pll            = PLL_28,
1835                 .tuner_type     = -1,
1836                 .tuner_addr     = ADDR_UNSET,
1837                 .radio_addr     = ADDR_UNSET,
1838                 .no_msp34xx     = 1,
1839                 .no_tda9875     = 1,
1840                 .no_tda7432     = 1,
1841         },
1842
1843                 /* ---- card 0x54 ---------------------------------- */
1844         [BTTV_BOARD_OSPREY101_848] = {
1845                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1846                 .video_inputs   = 2,
1847                 .audio_inputs   = 0,
1848                 .tuner          = -1,
1849                 .svhs           = 1,
1850                 .muxsel         = { 3, 1 },
1851                 .pll            = PLL_28,
1852                 .tuner_type     = -1,
1853                 .tuner_addr     = ADDR_UNSET,
1854                 .radio_addr     = ADDR_UNSET,
1855                 .no_msp34xx     = 1,
1856                 .no_tda9875     = 1,
1857                 .no_tda7432     = 1,
1858         },
1859         [BTTV_BOARD_OSPREY1x1] = {
1860                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1861                 .video_inputs   = 1,
1862                 .audio_inputs   = 0,
1863                 .tuner          = -1,
1864                 .svhs           = -1,
1865                 .muxsel         = { 0 },
1866                 .pll            = PLL_28,
1867                 .tuner_type     = -1,
1868                 .tuner_addr     = ADDR_UNSET,
1869                 .radio_addr     = ADDR_UNSET,
1870                 .no_msp34xx     = 1,
1871                 .no_tda9875     = 1,
1872                 .no_tda7432     = 1,
1873         },
1874         [BTTV_BOARD_OSPREY1x1_SVID] = {
1875                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1876                 .video_inputs   = 2,
1877                 .audio_inputs   = 0,
1878                 .tuner          = -1,
1879                 .svhs           = 1,
1880                 .muxsel         = { 0, 1 },
1881                 .pll            = PLL_28,
1882                 .tuner_type     = -1,
1883                 .tuner_addr     = ADDR_UNSET,
1884                 .radio_addr     = ADDR_UNSET,
1885                 .no_msp34xx     = 1,
1886                 .no_tda9875     = 1,
1887                 .no_tda7432     = 1,
1888         },
1889         [BTTV_BOARD_OSPREY2xx] = {
1890                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1891                 .video_inputs   = 1,
1892                 .audio_inputs   = 1,
1893                 .tuner          = -1,
1894                 .svhs           = -1,
1895                 .muxsel         = { 0 },
1896                 .pll            = PLL_28,
1897                 .tuner_type     = UNSET,
1898                 .tuner_addr     = ADDR_UNSET,
1899                 .radio_addr     = ADDR_UNSET,
1900                 .no_msp34xx     = 1,
1901                 .no_tda9875     = 1,
1902                 .no_tda7432     = 1,
1903         },
1904
1905                 /* ---- card 0x58 ---------------------------------- */
1906         [BTTV_BOARD_OSPREY2x0_SVID] = {
1907                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1908                 .video_inputs   = 2,
1909                 .audio_inputs   = 1,
1910                 .tuner          = -1,
1911                 .svhs           = 1,
1912                 .muxsel         = { 0, 1 },
1913                 .pll            = PLL_28,
1914                 .tuner_type     = UNSET,
1915                 .tuner_addr     = ADDR_UNSET,
1916                 .radio_addr     = ADDR_UNSET,
1917                 .no_msp34xx     = 1,
1918                 .no_tda9875     = 1,
1919                 .no_tda7432     = 1,
1920         },
1921         [BTTV_BOARD_OSPREY2x0] = {
1922                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1923                 .video_inputs   = 2,
1924                 .audio_inputs   = 1,
1925                 .tuner          = -1,
1926                 .svhs           = 1,
1927                 .muxsel         = { 2, 3 },
1928                 .pll            = PLL_28,
1929                 .tuner_type     = UNSET,
1930                 .tuner_addr     = ADDR_UNSET,
1931                 .radio_addr     = ADDR_UNSET,
1932                 .no_msp34xx     = 1,
1933                 .no_tda9875     = 1,
1934                 .no_tda7432     = 1,
1935         },
1936         [BTTV_BOARD_OSPREY500] = {
1937                 .name           = "Osprey 500",   /* 500 */
1938                 .video_inputs   = 2,
1939                 .audio_inputs   = 1,
1940                 .tuner          = -1,
1941                 .svhs           = 1,
1942                 .muxsel         = { 2, 3 },
1943                 .pll            = PLL_28,
1944                 .tuner_type     = -1,
1945                 .tuner_addr     = ADDR_UNSET,
1946                 .radio_addr     = ADDR_UNSET,
1947                 .no_msp34xx     = 1,
1948                 .no_tda9875     = 1,
1949                 .no_tda7432     = 1,
1950         },
1951         [BTTV_BOARD_OSPREY540] = {
1952                 .name           = "Osprey 540",   /* 540 */
1953                 .video_inputs   = 4,
1954                 .audio_inputs   = 1,
1955                 .tuner          = -1,
1956                 .pll            = PLL_28,
1957                 .tuner_type     = -1,
1958                 .tuner_addr     = ADDR_UNSET,
1959                 .radio_addr     = ADDR_UNSET,
1960                 .no_msp34xx     = 1,
1961                 .no_tda9875     = 1,
1962                 .no_tda7432     = 1,
1963         },
1964
1965                 /* ---- card 0x5C ---------------------------------- */
1966         [BTTV_BOARD_OSPREY2000] = {
1967                 .name           = "Osprey 2000",  /* 2000 */
1968                 .video_inputs   = 2,
1969                 .audio_inputs   = 1,
1970                 .tuner          = -1,
1971                 .svhs           = 1,
1972                 .muxsel         = { 2, 3 },
1973                 .pll            = PLL_28,
1974                 .tuner_type     = UNSET,
1975                 .tuner_addr     = ADDR_UNSET,
1976                 .radio_addr     = ADDR_UNSET,
1977                 .no_msp34xx     = 1,
1978                 .no_tda9875     = 1,
1979                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1980         },
1981         [BTTV_BOARD_IDS_EAGLE] = {
1982                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1983                 .name           = "IDS Eagle",
1984                 .video_inputs   = 4,
1985                 .audio_inputs   = 0,
1986                 .tuner          = -1,
1987                 .tuner_type     = -1,
1988                 .tuner_addr     = ADDR_UNSET,
1989                 .radio_addr     = ADDR_UNSET,
1990                 .svhs           = -1,
1991                 .gpiomask       = 0,
1992                 .muxsel         = { 0, 1, 2, 3 },
1993                 .muxsel_hook    = eagle_muxsel,
1994                 .no_msp34xx     = 1,
1995                 .no_tda9875     = 1,
1996                 .pll            = PLL_28,
1997         },
1998         [BTTV_BOARD_PINNACLESAT] = {
1999                 .name           = "Pinnacle PCTV Sat",
2000                 .video_inputs   = 2,
2001                 .audio_inputs   = 0,
2002                 .svhs           = 1,
2003                 .tuner          = -1,
2004                 .tuner_type     = -1,
2005                 .tuner_addr     = ADDR_UNSET,
2006                 .radio_addr     = ADDR_UNSET,
2007                 .no_msp34xx     = 1,
2008                 .no_tda9875     = 1,
2009                 .no_tda7432     = 1,
2010                 .muxsel         = { 3, 1 },
2011                 .pll            = PLL_28,
2012                 .no_gpioirq     = 1,
2013                 .has_dvb        = 1,
2014         },
2015         [BTTV_BOARD_FORMAC_PROTV] = {
2016                 .name           = "Formac ProTV II (bt878)",
2017                 .video_inputs   = 4,
2018                 .audio_inputs   = 1,
2019                 .tuner          = 0,
2020                 .svhs           = 3,
2021                 .gpiomask       = 2,
2022                 /* TV, Comp1, Composite over SVID con, SVID */
2023                 .muxsel         = { 2, 3, 1, 1 },
2024                 .gpiomux        = { 2, 2, 0, 0 },
2025                 .pll            = PLL_28,
2026                 .has_radio      = 1,
2027                 .tuner_type     = TUNER_PHILIPS_PAL,
2028                 .tuner_addr     = ADDR_UNSET,
2029                 .radio_addr     = ADDR_UNSET,
2030         /* sound routing:
2031                 GPIO=0x00,0x01,0x03: mute (?)
2032                 0x02: both TV and radio (tuner: FM1216/I)
2033                 The card has onboard audio connectors labeled "cdrom" and "board",
2034                 not soldered here, though unknown wiring.
2035                 Card lacks: external audio in, pci subsystem id.
2036         */
2037         },
2038
2039                 /* ---- card 0x60 ---------------------------------- */
2040         [BTTV_BOARD_MACHTV] = {
2041                 .name           = "MachTV",
2042                 .video_inputs   = 3,
2043                 .audio_inputs   = 1,
2044                 .tuner          = 0,
2045                 .svhs           = -1,
2046                 .gpiomask       = 7,
2047                 .muxsel         = { 2, 3, 1, 1},
2048                 .gpiomux        = { 0, 1, 2, 3},
2049                 .gpiomute       = 4,
2050                 .needs_tvaudio  = 1,
2051                 .tuner_type     = 5,
2052                 .tuner_addr     = ADDR_UNSET,
2053                 .radio_addr     = ADDR_UNSET,
2054                 .pll            = PLL_28,
2055         },
2056         [BTTV_BOARD_EURESYS_PICOLO] = {
2057                 .name           = "Euresys Picolo",
2058                 .video_inputs   = 3,
2059                 .audio_inputs   = 0,
2060                 .tuner          = -1,
2061                 .svhs           = 2,
2062                 .gpiomask       = 0,
2063                 .no_msp34xx     = 1,
2064                 .no_tda9875     = 1,
2065                 .no_tda7432     = 1,
2066                 .muxsel         = { 2, 0, 1},
2067                 .pll            = PLL_28,
2068                 .tuner_type     = UNSET,
2069                 .tuner_addr     = ADDR_UNSET,
2070                 .radio_addr     = ADDR_UNSET,
2071         },
2072         [BTTV_BOARD_PV150] = {
2073                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2074                 .name           = "ProVideo PV150", /* 0x4f */
2075                 .video_inputs   = 2,
2076                 .audio_inputs   = 0,
2077                 .tuner          = -1,
2078                 .svhs           = -1,
2079                 .gpiomask       = 0,
2080                 .muxsel         = { 2, 3 },
2081                 .gpiomux        = { 0 },
2082                 .needs_tvaudio  = 0,
2083                 .no_msp34xx     = 1,
2084                 .pll            = PLL_28,
2085                 .tuner_type     = UNSET,
2086                 .tuner_addr     = ADDR_UNSET,
2087                 .radio_addr     = ADDR_UNSET,
2088         },
2089         [BTTV_BOARD_AD_TVK503] = {
2090                 /* Hiroshi Takekawa <sian@big.or.jp> */
2091                 /* This card lacks subsystem ID */
2092                 .name           = "AD-TVK503", /* 0x63 */
2093                 .video_inputs   = 4,
2094                 .audio_inputs   = 1,
2095                 .tuner          = 0,
2096                 .svhs           = 2,
2097                 .gpiomask       = 0x001e8007,
2098                 .muxsel         = { 2, 3, 1, 0 },
2099                 /*                  Tuner, Radio, external, internal, off,  on */
2100                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
2101                 .gpiomute       = 0x0f,
2102                 .needs_tvaudio  = 0,
2103                 .no_msp34xx     = 1,
2104                 .pll            = PLL_28,
2105                 .tuner_type     = 2,
2106                 .tuner_addr     = ADDR_UNSET,
2107                 .radio_addr     = ADDR_UNSET,
2108                 .audio_hook     = adtvk503_audio,
2109         },
2110
2111                 /* ---- card 0x64 ---------------------------------- */
2112         [BTTV_BOARD_HERCULES_SM_TV] = {
2113                 .name           = "Hercules Smart TV Stereo",
2114                 .video_inputs   = 4,
2115                 .audio_inputs   = 1,
2116                 .tuner          = 0,
2117                 .svhs           = 2,
2118                 .gpiomask       = 0x00,
2119                 .muxsel         = { 2, 3, 1, 1 },
2120                 .needs_tvaudio  = 1,
2121                 .no_msp34xx     = 1,
2122                 .pll            = PLL_28,
2123                 .tuner_type     = 5,
2124                 .tuner_addr     = ADDR_UNSET,
2125                 .radio_addr     = ADDR_UNSET,
2126                 /* Notes:
2127                 - card lacks subsystem ID
2128                 - stereo variant w/ daughter board with tda9874a @0xb0
2129                 - Audio Routing:
2130                         always from tda9874 independent of GPIO (?)
2131                         external line in: unknown
2132                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2133                         hef4053 (instead 4052) for unknown function
2134                 */
2135         },
2136         [BTTV_BOARD_PACETV] = {
2137                 .name           = "Pace TV & Radio Card",
2138                 .video_inputs   = 4,
2139                 .audio_inputs   = 1,
2140                 .tuner          = 0,
2141                 .svhs           = 2,
2142                 .muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2143                 .gpiomask       = 0,
2144                 .no_tda9875     = 1,
2145                 .no_tda7432     = 1,
2146                 .tuner_type     = 1,
2147                 .tuner_addr     = ADDR_UNSET,
2148                 .radio_addr     = ADDR_UNSET,
2149                 .has_radio      = 1,
2150                 .pll            = PLL_28,
2151                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2152                 only internal line out: (4pin header) RGGL
2153                 Radio must be decoded by msp3410d (not routed through)*/
2154                 /*
2155                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2156                 */
2157         },
2158         [BTTV_BOARD_IVC200] = {
2159                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2160                 .name           = "IVC-200",
2161                 .video_inputs   = 1,
2162                 .audio_inputs   = 0,
2163                 .tuner          = -1,
2164                 .tuner_type     = -1,
2165                 .tuner_addr     = ADDR_UNSET,
2166                 .radio_addr     = ADDR_UNSET,
2167                 .svhs           = -1,
2168                 .gpiomask       = 0xdf,
2169                 .muxsel         = { 2 },
2170                 .pll            = PLL_28,
2171         },
2172         [BTTV_BOARD_XGUARD] = {
2173                 .name           = "Grand X-Guard / Trust 814PCI",
2174                 .video_inputs   = 16,
2175                 .audio_inputs   = 0,
2176                 .tuner          = -1,
2177                 .svhs           = -1,
2178                 .tuner_type     = 4,
2179                 .tuner_addr     = ADDR_UNSET,
2180                 .radio_addr     = ADDR_UNSET,
2181                 .gpiomask2      = 0xff,
2182                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2183                 .muxsel_hook    = xguard_muxsel,
2184                 .no_msp34xx     = 1,
2185                 .no_tda9875     = 1,
2186                 .no_tda7432     = 1,
2187                 .pll            = PLL_28,
2188         },
2189
2190                 /* ---- card 0x68 ---------------------------------- */
2191         [BTTV_BOARD_NEBULA_DIGITV] = {
2192                 .name           = "Nebula Electronics DigiTV",
2193                 .video_inputs   = 1,
2194                 .tuner          = -1,
2195                 .svhs           = -1,
2196                 .muxsel         = { 2, 3, 1, 0 },
2197                 .no_msp34xx     = 1,
2198                 .no_tda9875     = 1,
2199                 .no_tda7432     = 1,
2200                 .pll            = PLL_28,
2201                 .tuner_type     = -1,
2202                 .tuner_addr     = ADDR_UNSET,
2203                 .radio_addr     = ADDR_UNSET,
2204                 .has_dvb        = 1,
2205                 .has_remote     = 1,
2206                 .gpiomask       = 0x1b,
2207                 .no_gpioirq     = 1,
2208         },
2209         [BTTV_BOARD_PV143] = {
2210                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2211                 .name           = "ProVideo PV143",
2212                 .video_inputs   = 4,
2213                 .audio_inputs   = 0,
2214                 .tuner          = -1,
2215                 .svhs           = -1,
2216                 .gpiomask       = 0,
2217                 .muxsel         = { 2, 3, 1, 0 },
2218                 .gpiomux        = { 0 },
2219                 .needs_tvaudio  = 0,
2220                 .no_msp34xx     = 1,
2221                 .pll            = PLL_28,
2222                 .tuner_type     = -1,
2223                 .tuner_addr     = ADDR_UNSET,
2224                 .radio_addr     = ADDR_UNSET,
2225         },
2226         [BTTV_BOARD_VD009X1_MINIDIN] = {
2227                 /* M.Klahr@phytec.de */
2228                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2229                 .video_inputs   = 4,
2230                 .audio_inputs   = 0,
2231                 .tuner          = -1, /* card has no tuner */
2232                 .svhs           = 3,
2233                 .gpiomask       = 0x00,
2234                 .muxsel         = { 2, 3, 1, 0 },
2235                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2236                 .needs_tvaudio  = 1,
2237                 .pll            = PLL_28,
2238                 .tuner_type     = -1,
2239                 .tuner_addr     = ADDR_UNSET,
2240                 .radio_addr     = ADDR_UNSET,
2241         },
2242         [BTTV_BOARD_VD009X1_COMBI] = {
2243                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2244                 .video_inputs   = 4,
2245                 .audio_inputs   = 0,
2246                 .tuner          = -1, /* card has no tuner */
2247                 .svhs           = 3,
2248                 .gpiomask       = 0x00,
2249                 .muxsel         = { 2, 3, 1, 1 },
2250                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2251                 .needs_tvaudio  = 1,
2252                 .pll            = PLL_28,
2253                 .tuner_type     = -1,
2254                 .tuner_addr     = ADDR_UNSET,
2255                 .radio_addr     = ADDR_UNSET,
2256         },
2257
2258                 /* ---- card 0x6c ---------------------------------- */
2259         [BTTV_BOARD_VD009_MINIDIN] = {
2260                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2261                 .video_inputs   = 10,
2262                 .audio_inputs   = 0,
2263                 .tuner          = -1, /* card has no tuner */
2264                 .svhs           = 9,
2265                 .gpiomask       = 0x00,
2266                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2267                                         via the upper nibble of muxsel. here: used for
2268                                         xternal video-mux */
2269                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2270                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2271                 .needs_tvaudio  = 1,
2272                 .pll            = PLL_28,
2273                 .tuner_type     = -1,
2274                 .tuner_addr     = ADDR_UNSET,
2275                 .radio_addr     = ADDR_UNSET,
2276         },
2277         [BTTV_BOARD_VD009_COMBI] = {
2278                 .name           = "PHYTEC VD-009 Combi (bt878)",
2279                 .video_inputs   = 10,
2280                 .audio_inputs   = 0,
2281                 .tuner          = -1, /* card has no tuner */
2282                 .svhs           = 9,
2283                 .gpiomask       = 0x00,
2284                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2285                                         via the upper nibble of muxsel. here: used for
2286                                         xternal video-mux */
2287                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2288                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2289                 .needs_tvaudio  = 1,
2290                 .pll            = PLL_28,
2291                 .tuner_type     = -1,
2292                 .tuner_addr     = ADDR_UNSET,
2293                 .radio_addr     = ADDR_UNSET,
2294         },
2295         [BTTV_BOARD_IVC100] = {
2296                 .name           = "IVC-100",
2297                 .video_inputs   = 4,
2298                 .audio_inputs   = 0,
2299                 .tuner          = -1,
2300                 .tuner_type     = -1,
2301                 .tuner_addr     = ADDR_UNSET,
2302                 .radio_addr     = ADDR_UNSET,
2303                 .svhs           = -1,
2304                 .gpiomask       = 0xdf,
2305                 .muxsel         = { 2, 3, 1, 0 },
2306                 .pll            = PLL_28,
2307         },
2308         [BTTV_BOARD_IVC120] = {
2309                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2310                 .name           = "IVC-120G",
2311                 .video_inputs   = 16,
2312                 .audio_inputs   = 0,    /* card has no audio */
2313                 .tuner          = -1,   /* card has no tuner */
2314                 .tuner_type     = -1,
2315                 .tuner_addr     = ADDR_UNSET,
2316                 .radio_addr     = ADDR_UNSET,
2317                 .svhs           = -1,   /* card has no svhs */
2318                 .needs_tvaudio  = 0,
2319                 .no_msp34xx     = 1,
2320                 .no_tda9875     = 1,
2321                 .no_tda7432     = 1,
2322                 .gpiomask       = 0x00,
2323                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2324                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2325                 .muxsel_hook    = ivc120_muxsel,
2326                 .pll            = PLL_28,
2327         },
2328
2329                 /* ---- card 0x70 ---------------------------------- */
2330         [BTTV_BOARD_PC_HDTV] = {
2331                 .name           = "pcHDTV HD-2000 TV",
2332                 .video_inputs   = 4,
2333                 .audio_inputs   = 1,
2334                 .tuner          = 0,
2335                 .svhs           = 2,
2336                 .muxsel         = { 2, 3, 1, 0 },
2337                 .tuner_type     = TUNER_PHILIPS_ATSC,
2338                 .tuner_addr     = ADDR_UNSET,
2339                 .radio_addr     = ADDR_UNSET,
2340                 .has_dvb        = 1,
2341         },
2342         [BTTV_BOARD_TWINHAN_DST] = {
2343                 .name           = "Twinhan DST + clones",
2344                 .no_msp34xx     = 1,
2345                 .no_tda9875     = 1,
2346                 .no_tda7432     = 1,
2347                 .tuner_type     = TUNER_ABSENT,
2348                 .tuner_addr     = ADDR_UNSET,
2349                 .radio_addr     = ADDR_UNSET,
2350                 .no_video       = 1,
2351                 .has_dvb        = 1,
2352         },
2353         [BTTV_BOARD_WINFASTVC100] = {
2354                 .name           = "Winfast VC100",
2355                 .video_inputs   = 3,
2356                 .audio_inputs   = 0,
2357                 .svhs           = 1,
2358                 .tuner          = -1,
2359                 .muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2360                 .no_msp34xx     = 1,
2361                 .no_tda9875     = 1,
2362                 .no_tda7432     = 1,
2363                 .tuner_type     = TUNER_ABSENT,
2364                 .tuner_addr     = ADDR_UNSET,
2365                 .radio_addr     = ADDR_UNSET,
2366                 .pll            = PLL_28,
2367         },
2368         [BTTV_BOARD_TEV560] = {
2369                 .name           = "Teppro TEV-560/InterVision IV-560",
2370                 .video_inputs   = 3,
2371                 .audio_inputs   = 1,
2372                 .tuner          = 0,
2373                 .svhs           = 2,
2374                 .gpiomask       = 3,
2375                 .muxsel         = { 2, 3, 1, 1 },
2376                 .gpiomux        = { 1, 1, 1, 1 },
2377                 .needs_tvaudio  = 1,
2378                 .tuner_type     = TUNER_PHILIPS_PAL,
2379                 .tuner_addr     = ADDR_UNSET,
2380                 .radio_addr     = ADDR_UNSET,
2381                 .pll            = PLL_35,
2382         },
2383
2384                 /* ---- card 0x74 ---------------------------------- */
2385         [BTTV_BOARD_SIMUS_GVC1100] = {
2386                 .name           = "SIMUS GVC1100",
2387                 .video_inputs   = 4,
2388                 .audio_inputs   = 0,
2389                 .tuner          = -1,
2390                 .svhs           = -1,
2391                 .tuner_type     = -1,
2392                 .tuner_addr     = ADDR_UNSET,
2393                 .radio_addr     = ADDR_UNSET,
2394                 .pll            = PLL_28,
2395                 .muxsel         = { 2, 2, 2, 2 },
2396                 .gpiomask       = 0x3F,
2397                 .muxsel_hook    = gvc1100_muxsel,
2398         },
2399         [BTTV_BOARD_NGSTV_PLUS] = {
2400                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2401                 .name           = "NGS NGSTV+",
2402                 .video_inputs   = 3,
2403                 .tuner          = 0,
2404                 .svhs           = 2,
2405                 .gpiomask       = 0x008007,
2406                 .muxsel         = { 2, 3, 0, 0 },
2407                 .gpiomux        = { 0, 0, 0, 0 },
2408                 .gpiomute       = 0x000003,
2409                 .pll            = PLL_28,
2410                 .tuner_type     = TUNER_PHILIPS_PAL,
2411                 .tuner_addr     = ADDR_UNSET,
2412                 .radio_addr     = ADDR_UNSET,
2413                 .has_remote     = 1,
2414         },
2415         [BTTV_BOARD_LMLBT4] = {
2416                 /* http://linuxmedialabs.com */
2417                 .name           = "LMLBT4",
2418                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2419                 .audio_inputs   = 0,
2420                 .tuner          = -1,
2421                 .svhs           = -1,
2422                 .muxsel         = { 2, 3, 1, 0 },
2423                 .no_msp34xx     = 1,
2424                 .no_tda9875     = 1,
2425                 .no_tda7432     = 1,
2426                 .needs_tvaudio  = 0,
2427                 .tuner_type     = -1,
2428                 .tuner_addr     = ADDR_UNSET,
2429                 .radio_addr     = ADDR_UNSET,
2430         },
2431         [BTTV_BOARD_TEKRAM_M205] = {
2432                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2433                 .name           = "Tekram M205 PRO",
2434                 .video_inputs   = 3,
2435                 .audio_inputs   = 1,
2436                 .tuner          = 0,
2437                 .tuner_type     = TUNER_PHILIPS_PAL,
2438                 .tuner_addr     = ADDR_UNSET,
2439                 .radio_addr     = ADDR_UNSET,
2440                 .svhs           = 2,
2441                 .needs_tvaudio  = 0,
2442                 .gpiomask       = 0x68,
2443                 .muxsel         = { 2, 3, 1 },
2444                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2445                 .pll            = PLL_28,
2446         },
2447
2448                 /* ---- card 0x78 ---------------------------------- */
2449         [BTTV_BOARD_CONTVFMI] = {
2450                 /* Javier Cendan Ares <jcendan@lycos.es> */
2451                 /* bt878 TV + FM without subsystem ID */
2452                 .name           = "Conceptronic CONTVFMi",
2453                 .video_inputs   = 3,
2454                 .audio_inputs   = 1,
2455                 .tuner          = 0,
2456                 .svhs           = 2,
2457                 .gpiomask       = 0x008007,
2458                 .muxsel         = { 2, 3, 1, 1 },
2459                 .gpiomux        = { 0, 1, 2, 2 },
2460                 .gpiomute       = 3,
2461                 .needs_tvaudio  = 0,
2462                 .pll            = PLL_28,
2463                 .tuner_type     = TUNER_PHILIPS_PAL,
2464                 .tuner_addr     = ADDR_UNSET,
2465                 .radio_addr     = ADDR_UNSET,
2466                 .has_remote     = 1,
2467                 .has_radio      = 1,
2468         },
2469         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2470                 /*Eric DEBIEF <debief@telemsa.com>*/
2471                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2472                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2473                 /*0x79 in bttv.h*/
2474                 .name           = "Euresys Picolo Tetra",
2475                 .video_inputs   = 4,
2476                 .audio_inputs   = 0,
2477                 .tuner          = -1,
2478                 .svhs           = -1,
2479                 .gpiomask       = 0,
2480                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2481                 .no_msp34xx     = 1,
2482                 .no_tda9875     = 1,
2483                 .no_tda7432     = 1,
2484                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2485                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2486                 .pll            = PLL_28,
2487                 .needs_tvaudio  = 0,
2488                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2489                 .tuner_type     = -1,
2490                 .tuner_addr     = ADDR_UNSET,
2491                 .radio_addr     = ADDR_UNSET,
2492         },
2493         [BTTV_BOARD_SPIRIT_TV] = {
2494                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2495                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2496                 .name           = "Spirit TV Tuner",
2497                 .video_inputs   = 3,
2498                 .audio_inputs   = 1,
2499                 .tuner          = 0,
2500                 .svhs           = 2,
2501                 .gpiomask       = 0x0000000f,
2502                 .muxsel         = { 2, 1, 1 },
2503                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2504                 .tuner_type     = TUNER_TEMIC_PAL,
2505                 .tuner_addr     = ADDR_UNSET,
2506                 .radio_addr     = ADDR_UNSET,
2507                 .no_msp34xx     = 1,
2508                 .no_tda9875     = 1,
2509         },
2510         [BTTV_BOARD_AVDVBT_771] = {
2511                 /* Wolfram Joost <wojo@frokaschwei.de> */
2512                 .name           = "AVerMedia AVerTV DVB-T 771",
2513                 .video_inputs   = 2,
2514                 .svhs           = 1,
2515                 .tuner          = -1,
2516                 .tuner_type     = TUNER_ABSENT,
2517                 .tuner_addr     = ADDR_UNSET,
2518                 .radio_addr     = ADDR_UNSET,
2519                 .muxsel         = { 3 , 3 },
2520                 .no_msp34xx     = 1,
2521                 .no_tda9875     = 1,
2522                 .no_tda7432     = 1,
2523                 .pll            = PLL_28,
2524                 .has_dvb        = 1,
2525                 .no_gpioirq     = 1,
2526                 .has_remote     = 1,
2527         },
2528                 /* ---- card 0x7c ---------------------------------- */
2529         [BTTV_BOARD_AVDVBT_761] = {
2530                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2531                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2532                 .name           = "AverMedia AverTV DVB-T 761",
2533                 .video_inputs   = 2,
2534                 .tuner          = -1,
2535                 .svhs           = 1,
2536                 .muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2537                 .no_msp34xx     = 1,
2538                 .no_tda9875     = 1,
2539                 .no_tda7432     = 1,
2540                 .pll            = PLL_28,
2541                 .tuner_type     = -1,
2542                 .tuner_addr     = ADDR_UNSET,
2543                 .radio_addr     = ADDR_UNSET,
2544                 .has_dvb        = 1,
2545                 .no_gpioirq     = 1,
2546                 .has_remote     = 1,
2547         },
2548         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2549                 /* andre.schwarz@matrix-vision.de */
2550                 .name             = "MATRIX Vision Sigma-SQ",
2551                 .video_inputs     = 16,
2552                 .audio_inputs     = 0,
2553                 .tuner            = -1,
2554                 .svhs             = -1,
2555                 .gpiomask         = 0x0,
2556                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2557                                 3, 3, 3, 3, 3, 3, 3, 3 },
2558                 .muxsel_hook      = sigmaSQ_muxsel,
2559                 .gpiomux          = { 0 },
2560                 .no_msp34xx       = 1,
2561                 .pll              = PLL_28,
2562                 .tuner_type       = -1,
2563                 .tuner_addr       = ADDR_UNSET,
2564                 .radio_addr     = ADDR_UNSET,
2565         },
2566         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2567                 /* andre.schwarz@matrix-vision.de */
2568                 .name             = "MATRIX Vision Sigma-SLC",
2569                 .video_inputs     = 4,
2570                 .audio_inputs     = 0,
2571                 .tuner            = -1,
2572                 .svhs             = -1,
2573                 .gpiomask         = 0x0,
2574                 .muxsel           = { 2, 2, 2, 2 },
2575                 .muxsel_hook      = sigmaSLC_muxsel,
2576                 .gpiomux          = { 0 },
2577                 .no_msp34xx       = 1,
2578                 .pll              = PLL_28,
2579                 .tuner_type       = -1,
2580                 .tuner_addr       = ADDR_UNSET,
2581                 .radio_addr     = ADDR_UNSET,
2582         },
2583                 /* BTTV_BOARD_APAC_VIEWCOMP */
2584         [BTTV_BOARD_APAC_VIEWCOMP] = {
2585                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2586                 /* bt878 TV + FM 0x00000000 subsystem ID */
2587                 .name           = "APAC Viewcomp 878(AMAX)",
2588                 .video_inputs   = 2,
2589                 .audio_inputs   = 1,
2590                 .tuner          = 0,
2591                 .svhs           = -1,
2592                 .gpiomask       = 0xFF,
2593                 .muxsel         = { 2, 3, 1, 1 },
2594                 .gpiomux        = { 2, 0, 0, 0 },
2595                 .gpiomute       = 10,
2596                 .needs_tvaudio  = 0,
2597                 .pll            = PLL_28,
2598                 .tuner_type     = TUNER_PHILIPS_PAL,
2599                 .tuner_addr     = ADDR_UNSET,
2600                 .radio_addr     = ADDR_UNSET,
2601                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2602                 .has_radio      = 1,   /* not every card has radio */
2603         },
2604
2605                 /* ---- card 0x80 ---------------------------------- */
2606         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2607                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2608                 .name           = "DViCO FusionHDTV DVB-T Lite",
2609                 .tuner          = -1,
2610                 .no_msp34xx     = 1,
2611                 .no_tda9875     = 1,
2612                 .no_tda7432     = 1,
2613                 .pll            = PLL_28,
2614                 .no_video       = 1,
2615                 .has_dvb        = 1,
2616                 .tuner_type     = -1,
2617                 .tuner_addr     = ADDR_UNSET,
2618                 .radio_addr     = ADDR_UNSET,
2619         },
2620         [BTTV_BOARD_VGEAR_MYVCD] = {
2621                 /* Steven <photon38@pchome.com.tw> */
2622                 .name           = "V-Gear MyVCD",
2623                 .video_inputs   = 3,
2624                 .audio_inputs   = 1,
2625                 .tuner          = 0,
2626                 .svhs           = 2,
2627                 .gpiomask       = 0x3f,
2628                 .muxsel         = {2, 3, 1, 0 },
2629                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2630                 .gpiomute       = 0x31,
2631                 .no_msp34xx     = 1,
2632                 .pll            = PLL_28,
2633                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2634                 .tuner_addr     = ADDR_UNSET,
2635                 .radio_addr     = ADDR_UNSET,
2636                 .has_radio      = 0,
2637         },
2638         [BTTV_BOARD_SUPER_TV] = {
2639                 /* Rick C <cryptdragoon@gmail.com> */
2640                 .name           = "Super TV Tuner",
2641                 .video_inputs   = 4,
2642                 .audio_inputs   = 1,
2643                 .tuner          = 0,
2644                 .svhs           = 2,
2645                 .muxsel         = { 2, 3, 1, 0 },
2646                 .tuner_type     = TUNER_PHILIPS_NTSC,
2647                 .tuner_addr     = ADDR_UNSET,
2648                 .radio_addr     = ADDR_UNSET,
2649                 .gpiomask       = 0x008007,
2650                 .gpiomux        = { 0, 0x000001,0,0 },
2651                 .needs_tvaudio  = 1,
2652                 .has_radio      = 1,
2653         },
2654         [BTTV_BOARD_TIBET_CS16] = {
2655                 /* Chris Fanning <video4linux@haydon.net> */
2656                 .name           = "Tibet Systems 'Progress DVR' CS16",
2657                 .video_inputs   = 16,
2658                 .audio_inputs   = 0,
2659                 .tuner          = -1,
2660                 .svhs           = -1,
2661                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2662                 .pll            = PLL_28,
2663                 .no_msp34xx     = 1,
2664                 .no_tda9875     = 1,
2665                 .no_tda7432     = 1,
2666                 .tuner_type     = -1,
2667                 .tuner_addr     = ADDR_UNSET,
2668                 .radio_addr     = ADDR_UNSET,
2669                 .muxsel_hook    = tibetCS16_muxsel,
2670         },
2671         [BTTV_BOARD_KODICOM_4400R] = {
2672                 /* Bill Brack <wbrack@mmm.com.hk> */
2673                 /*
2674                 * Note that, because of the card's wiring, the "master"
2675                 * BT878A chip (i.e. the one which controls the analog switch
2676                 * and must use this card type) is the 2nd one detected.  The
2677                 * other 3 chips should use card type 0x85, whose description
2678                 * follows this one.  There is a EEPROM on the card (which is
2679                 * connected to the I2C of one of those other chips), but is
2680                 * not currently handled.  There is also a facility for a
2681                 * "monitor", which is also not currently implemented.
2682                 */
2683                 .name           = "Kodicom 4400R (master)",
2684                 .video_inputs   = 16,
2685                 .audio_inputs   = 0,
2686                 .tuner          = -1,
2687                 .tuner_type     = -1,
2688                 .tuner_addr     = ADDR_UNSET,
2689                 .radio_addr     = ADDR_UNSET,
2690                 .svhs           = -1,
2691                 /* GPIO bits 0-9 used for analog switch:
2692                 *   00 - 03:    camera selector
2693                 *   04 - 06:    channel (controller) selector
2694                 *   07: data (1->on, 0->off)
2695                 *   08: strobe
2696                 *   09: reset
2697                 * bit 16 is input from sync separator for the channel
2698                 */
2699                 .gpiomask       = 0x0003ff,
2700                 .no_gpioirq     = 1,
2701                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2702                 .pll            = PLL_28,
2703                 .no_msp34xx     = 1,
2704                 .no_tda7432     = 1,
2705                 .no_tda9875     = 1,
2706                 .muxsel_hook    = kodicom4400r_muxsel,
2707         },
2708         [BTTV_BOARD_KODICOM_4400R_SL] = {
2709                 /* Bill Brack <wbrack@mmm.com.hk> */
2710                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2711                 * one which controls the analog switch, and must use the card type)
2712                 * is the 2nd one detected.  The other 3 chips should use this card
2713                 * type
2714                 */
2715                 .name           = "Kodicom 4400R (slave)",
2716                 .video_inputs   = 16,
2717                 .audio_inputs   = 0,
2718                 .tuner          = -1,
2719                 .tuner_type     = -1,
2720                 .tuner_addr     = ADDR_UNSET,
2721                 .radio_addr     = ADDR_UNSET,
2722                 .svhs           = -1,
2723                 .gpiomask       = 0x010000,
2724                 .no_gpioirq     = 1,
2725                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2726                 .pll            = PLL_28,
2727                 .no_msp34xx     = 1,
2728                 .no_tda7432     = 1,
2729                 .no_tda9875     = 1,
2730                 .muxsel_hook    = kodicom4400r_muxsel,
2731         },
2732                 /* ---- card 0x86---------------------------------- */
2733         [BTTV_BOARD_ADLINK_RTV24] = {
2734                 /* Michael Henson <mhenson@clarityvi.com> */
2735                 /* Adlink RTV24 with special unlock codes */
2736                 .name           = "Adlink RTV24",
2737                 .video_inputs   = 4,
2738                 .audio_inputs   = 1,
2739                 .tuner          = 0,
2740                 .svhs           = 2,
2741                 .muxsel         = { 2, 3, 1, 0 },
2742                 .tuner_type     = -1,
2743                 .tuner_addr     = ADDR_UNSET,
2744                 .radio_addr     = ADDR_UNSET,
2745                 .pll            = PLL_28,
2746         },
2747                 /* ---- card 0x87---------------------------------- */
2748         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2749                 /* Michael Krufky <mkrufky@m1k.net> */
2750                 .name           = "DViCO FusionHDTV 5 Lite",
2751                 .tuner          = 0,
2752                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2753                 .tuner_addr     = ADDR_UNSET,
2754                 .radio_addr     = ADDR_UNSET,
2755                 .video_inputs   = 3,
2756                 .audio_inputs   = 1,
2757                 .svhs           = 2,
2758                 .muxsel         = { 2, 3, 1 },
2759                 .gpiomask       = 0x00e00007,
2760                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2761                 .gpiomute       = 0x00c00007,
2762                 .no_msp34xx     = 1,
2763                 .no_tda9875     = 1,
2764                 .no_tda7432     = 1,
2765                 .has_dvb        = 1,
2766         },
2767                 /* ---- card 0x88---------------------------------- */
2768         [BTTV_BOARD_ACORP_Y878F] = {
2769                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2770                 .name           = "Acorp Y878F",
2771                 .video_inputs   = 3,
2772                 .audio_inputs   = 1,
2773                 .tuner          = 0,
2774                 .svhs           = 2,
2775                 .gpiomask       = 0x01fe00,
2776                 .muxsel         = { 2, 3, 1, 1 },
2777                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2778                 .gpiomute       = 0x002000,
2779                 .needs_tvaudio  = 1,
2780                 .pll            = PLL_28,
2781                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2782                 .tuner_addr     = 0xc1 >>1,
2783                 .radio_addr     = 0xc1 >>1,
2784                 .has_radio      = 1,
2785         },
2786                 /* ---- card 0x89 ---------------------------------- */
2787         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2788                 .name           = "Conceptronic CTVFMi v2",
2789                 .video_inputs   = 3,
2790                 .audio_inputs   = 1,
2791                 .tuner          = 0,
2792                 .svhs           = 2,
2793                 .gpiomask       = 0x001c0007,
2794                 .muxsel         = { 2, 3, 1, 1 },
2795                 .gpiomux        = { 0, 1, 2, 2 },
2796                 .gpiomute       = 3,
2797                 .needs_tvaudio  = 0,
2798                 .pll            = PLL_28,
2799                 .tuner_type     = TUNER_TENA_9533_DI,
2800                 .tuner_addr     = ADDR_UNSET,
2801                 .radio_addr     = ADDR_UNSET,
2802                 .has_remote     = 1,
2803                 .has_radio      = 1,
2804         },
2805                 /* ---- card 0x8a ---------------------------------- */
2806         [BTTV_BOARD_PV_BT878P_2E] = {
2807                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2808                 .video_inputs  = 5,
2809                 .audio_inputs  = 1,
2810                 .tuner         = 0,
2811                 .svhs          = 3,
2812                 .gpiomask      = 0x01fe00,
2813                 .muxsel        = { 2,3,1,1,-1 },
2814                 .digital_mode  = DIGITAL_MODE_CAMERA,
2815                 .gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
2816                 .gpiomute      = 0x12400,
2817                 .no_msp34xx    = 1,
2818                 .pll           = PLL_28,
2819                 .tuner_type    = TUNER_LG_PAL_FM,
2820                 .tuner_addr     = ADDR_UNSET,
2821                 .radio_addr     = ADDR_UNSET,
2822                 .has_remote    = 1,
2823         },
2824                 /* ---- card 0x8b ---------------------------------- */
2825         [BTTV_BOARD_PV_M4900] = {
2826                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2827                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2828                 .video_inputs   = 3,
2829                 .audio_inputs   = 1,
2830                 .tuner          = 0,
2831                 .svhs           = 2,
2832                 .gpiomask       = 0x3f,
2833                 .muxsel         = { 2, 3, 1, 1 },
2834                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2835                 .gpiomute       = 0x29,
2836                 .no_msp34xx     = 1,
2837                 .pll            = PLL_28,
2838                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2839                 .tuner_addr     = ADDR_UNSET,
2840                 .radio_addr     = ADDR_UNSET,
2841                 .has_radio      = 1,
2842                 .has_remote     = 1,
2843         },
2844                 /* ---- card 0x8c ---------------------------------- */
2845         [BTTV_BOARD_OSPREY440]  = {
2846                 .name           = "Osprey 440",
2847                 .video_inputs   = 1,
2848                 .audio_inputs   = 1,
2849                 .tuner          = -1,
2850                 .svhs           = 1,
2851                 .muxsel         = { 2 },
2852                 .pll            = PLL_28,
2853                 .tuner_type     = UNSET,
2854                 .tuner_addr     = ADDR_UNSET,
2855                 .radio_addr     = ADDR_UNSET,
2856                 .no_msp34xx     = 1,
2857                 .no_tda9875     = 1,
2858                 .no_tda7432     = 1,
2859         },
2860                 /* ---- card 0x8d ---------------------------------- */
2861         [BTTV_BOARD_ASOUND_SKYEYE] = {
2862                 .name           = "Asound Skyeye PCTV",
2863                 .video_inputs   = 3,
2864                 .audio_inputs   = 1,
2865                 .tuner          = 0,
2866                 .svhs           = 2,
2867                 .gpiomask       = 15,
2868                 .muxsel         = { 2, 3, 1, 1 },
2869                 .gpiomux        = { 2, 0, 0, 0 },
2870                 .gpiomute       = 1,
2871                 .needs_tvaudio  = 1,
2872                 .pll            = PLL_28,
2873                 .tuner_type     = 2,
2874                 .tuner_addr     = ADDR_UNSET,
2875                 .radio_addr     = ADDR_UNSET,
2876         },
2877                 /* ---- card 0x8e ---------------------------------- */
2878         [BTTV_BOARD_SABRENT_TVFM] = {
2879                 .name           = "Sabrent TV-FM (bttv version)",
2880                 .video_inputs   = 3,
2881                 .audio_inputs   = 1,
2882                 .tuner          = 0,
2883                 .svhs           = 2,
2884                 .gpiomask       = 0x108007,
2885                 .muxsel         = { 2, 3, 1, 1 },
2886                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2887                 .no_msp34xx     = 1,
2888                 .no_tda9875     = 1,
2889                 .no_tda7432     = 1,
2890                 .pll            = PLL_28,
2891                 .tuner_type     = TUNER_TNF_5335MF,
2892                 .tuner_addr     = ADDR_UNSET,
2893                 .has_radio      = 1,
2894         },
2895         /* ---- card 0x8f ---------------------------------- */
2896         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2897                 .name           = "Hauppauge ImpactVCB (bt878)",
2898                 .video_inputs   = 4,
2899                 .audio_inputs   = 0,
2900                 .tuner          = -1,
2901                 .svhs           = -1,
2902                 .gpiomask       = 0x0f, /* old: 7 */
2903                 .muxsel         = { 0, 1, 3, 2 }, /* Composite 0-3 */
2904                 .no_msp34xx     = 1,
2905                 .no_tda9875     = 1,
2906                 .no_tda7432     = 1,
2907                 .tuner_type     = -1,
2908                 .tuner_addr     = ADDR_UNSET,
2909                 .radio_addr     = ADDR_UNSET,
2910         },
2911         [BTTV_BOARD_MACHTV_MAGICTV] = {
2912                 /* Julian Calaby <julian.calaby@gmail.com>
2913                  * Slightly different from original MachTV definition (0x60)
2914
2915                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2916                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2917                  * properly (methinks) causing no keyup bits being set */
2918
2919                 .name           = "MagicTV", /* rebranded MachTV */
2920                 .video_inputs   = 3,
2921                 .audio_inputs   = 1,
2922                 .tuner          = 0,
2923                 .svhs           = 2,
2924                 .gpiomask       = 7,
2925                 .muxsel         = { 2, 3, 1, 1 },
2926                 .gpiomux        = { 0, 1, 2, 3 },
2927                 .gpiomute       = 4,
2928                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2929                 .tuner_addr     = ADDR_UNSET,
2930                 .radio_addr     = ADDR_UNSET,
2931                 .pll            = PLL_28,
2932                 .has_radio      = 1,
2933                 .has_remote     = 1,
2934         },
2935         [BTTV_BOARD_SSAI_SECURITY] = {
2936                 .name           = "SSAI Security Video Interface",
2937                 .video_inputs   = 4,
2938                 .audio_inputs   = 0,
2939                 .tuner          = -1,
2940                 .svhs           = -1,
2941                 .muxsel         = { 0, 1, 2, 3 },
2942                 .tuner_type     = -1,
2943                 .tuner_addr     = ADDR_UNSET,
2944                 .radio_addr     = ADDR_UNSET,
2945         },
2946         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2947                 .name           = "SSAI Ultrasound Video Interface",
2948                 .video_inputs   = 2,
2949                 .audio_inputs   = 0,
2950                 .tuner          = -1,
2951                 .svhs           = 1,
2952                 .muxsel         = { 2, 0, 1, 3 },
2953                 .tuner_type     = -1,
2954                 .tuner_addr     = ADDR_UNSET,
2955                 .radio_addr     = ADDR_UNSET,
2956         },
2957 };
2958
2959 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2960
2961 /* ----------------------------------------------------------------------- */
2962
2963 static unsigned char eeprom_data[256];
2964
2965 /*
2966  * identify card
2967  */
2968 void __devinit bttv_idcard(struct bttv *btv)
2969 {
2970         unsigned int gpiobits;
2971         int i,type;
2972         unsigned short tmp;
2973
2974         /* read PCI subsystem ID */
2975         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2976         btv->cardid = tmp << 16;
2977         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2978         btv->cardid |= tmp;
2979
2980         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2981                 /* look for the card */
2982                 for (type = -1, i = 0; cards[i].id != 0; i++)
2983                         if (cards[i].id  == btv->cardid)
2984                                 type = i;
2985
2986                 if (type != -1) {
2987                         /* found it */
2988                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2989                                "PCI subsystem ID is %04x:%04x\n",
2990                                btv->c.nr,cards[type].name,cards[type].cardnr,
2991                                btv->cardid & 0xffff,
2992                                (btv->cardid >> 16) & 0xffff);
2993                         btv->c.type = cards[type].cardnr;
2994                 } else {
2995                         /* 404 */
2996                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2997                                btv->c.nr, btv->cardid & 0xffff,
2998                                (btv->cardid >> 16) & 0xffff);
2999                         printk(KERN_DEBUG "please mail id, board name and "
3000                                "the correct card= insmod option to video4linux-list@redhat.com\n");
3001                 }
3002         }
3003
3004         /* let the user override the autodetected type */
3005         if (card[btv->c.nr] < bttv_num_tvcards)
3006                 btv->c.type=card[btv->c.nr];
3007
3008         /* print which card config we are using */
3009         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
3010                bttv_tvcards[btv->c.type].name, btv->c.type,
3011                card[btv->c.nr] < bttv_num_tvcards
3012                ? "insmod option" : "autodetected");
3013
3014         /* overwrite gpio stuff ?? */
3015         if (UNSET == audioall && UNSET == audiomux[0])
3016                 return;
3017
3018         if (UNSET != audiomux[0]) {
3019                 gpiobits = 0;
3020                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3021                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3022                         gpiobits |= audiomux[i];
3023                 }
3024         } else {
3025                 gpiobits = audioall;
3026                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3027                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3028                 }
3029         }
3030         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3031         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3032                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3033         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3034                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3035         }
3036         printk("\n");
3037 }
3038
3039 /*
3040  * (most) board specific initialisations goes here
3041  */
3042
3043 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3044 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3045 {
3046         int type = -1;
3047
3048         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3049                 type = BTTV_BOARD_MODTEC_205;
3050         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3051                 type = BTTV_BOARD_EURESYS_PICOLO;
3052         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3053                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3054
3055         if (-1 != type) {
3056                 btv->c.type = type;
3057                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3058                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3059         }
3060 }
3061
3062 static void flyvideo_gpio(struct bttv *btv)
3063 {
3064         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3065         int tuner=-1,ttype;
3066
3067         gpio_inout(0xffffff, 0);
3068         udelay(8);  /* without this we would see the 0x1800 mask */
3069         gpio = gpio_read();
3070         /* FIXME: must restore OUR_EN ??? */
3071
3072         /* all cards provide GPIO info, some have an additional eeprom
3073          * LR50: GPIO coding can be found lower right CP1 .. CP9
3074          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3075          *       GPIO14-12: n.c.
3076          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3077
3078          * lowest 3 bytes are remote control codes (no handshake needed)
3079          * xxxFFF: No remote control chip soldered
3080          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3081          * Note: Some bits are Audio_Mask !
3082          */
3083         ttype=(gpio&0x0f0000)>>16;
3084         switch(ttype) {
3085         case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3086                 break;
3087         case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3088                 break;
3089         case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3090                 break;
3091         case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3092                 break;
3093                 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3094                 break;
3095         default:
3096                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3097         }
3098
3099         has_remote          =   gpio & 0x800000;
3100         has_radio           =   gpio & 0x400000;
3101         /*   unknown                   0x200000;
3102          *   unknown2                  0x100000; */
3103         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3104         has_tda9820_tda9821 = !(gpio & 0x004000);
3105         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3106         /*
3107          * gpio & 0x001000    output bit for audio routing */
3108
3109         if(is_capture_only)
3110                 tuner=4; /* No tuner present */
3111
3112         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3113                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3114         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3115                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3116                 is_capture_only?"yes":"no ");
3117
3118         if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3119                 btv->tuner_type = tuner;
3120         btv->has_radio = has_radio;
3121
3122         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3123          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3124          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3125         if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3126         /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3127 }
3128
3129 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3130                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3131 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3132                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3133
3134 static void miro_pinnacle_gpio(struct bttv *btv)
3135 {
3136         int id,msp,gpio;
3137         char *info;
3138
3139         gpio_inout(0xffffff, 0);
3140         gpio = gpio_read();
3141         id   = ((gpio>>10) & 63) -1;
3142         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3143         if (id < 32) {
3144                 btv->tuner_type = miro_tunermap[id];
3145                 if (0 == (gpio & 0x20)) {
3146                         btv->has_radio = 1;
3147                         if (!miro_fmtuner[id]) {
3148                                 btv->has_matchbox = 1;
3149                                 btv->mbox_we    = (1<<6);
3150                                 btv->mbox_most  = (1<<7);
3151                                 btv->mbox_clk   = (1<<8);
3152                                 btv->mbox_data  = (1<<9);
3153                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3154                         }
3155                 } else {
3156                         btv->has_radio = 0;
3157                 }
3158                 if (-1 != msp) {
3159                         if (btv->c.type == BTTV_BOARD_MIRO)
3160                                 btv->c.type = BTTV_BOARD_MIROPRO;
3161                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3162                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3163                 }
3164                 printk(KERN_INFO
3165                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3166                        btv->c.nr, id+1, btv->tuner_type,
3167                        !btv->has_radio ? "no" :
3168                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3169                        (-1 == msp) ? "no" : "yes");
3170         } else {
3171                 /* new cards with microtune tuner */
3172                 id = 63 - id;
3173                 btv->has_radio = 0;
3174                 switch (id) {
3175                 case 1:
3176                         info = "PAL / mono";
3177                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3178                         break;
3179                 case 2:
3180                         info = "PAL+SECAM / stereo";
3181                         btv->has_radio = 1;
3182                         btv->tda9887_conf = TDA9887_QSS;
3183                         break;
3184                 case 3:
3185                         info = "NTSC / stereo";
3186                         btv->has_radio = 1;
3187                         btv->tda9887_conf = TDA9887_QSS;
3188                         break;
3189                 case 4:
3190                         info = "PAL+SECAM / mono";
3191                         btv->tda9887_conf = TDA9887_QSS;
3192                         break;
3193                 case 5:
3194                         info = "NTSC / mono";
3195                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3196                         break;
3197                 case 6:
3198                         info = "NTSC / stereo";
3199                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3200                         break;
3201                 case 7:
3202                         info = "PAL / stereo";
3203                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3204                         break;
3205                 default:
3206                         info = "oops: unknown card";
3207                         break;
3208                 }
3209                 if (-1 != msp)
3210                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3211                 printk(KERN_INFO
3212                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3213                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3214                 btv->tuner_type = TUNER_MT2032;
3215         }
3216 }
3217
3218 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3219 #define LM1882_SYNC_DRIVE     0x200000L
3220
3221 static void init_ids_eagle(struct bttv *btv)
3222 {
3223         gpio_inout(0xffffff,0xFFFF37);
3224         gpio_write(0x200020);
3225
3226         /* flash strobe inverter ?! */
3227         gpio_write(0x200024);
3228
3229         /* switch sync drive off */
3230         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3231
3232         /* set BT848 muxel to 2 */
3233         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3234 }
3235
3236 /* Muxsel helper for the IDS Eagle.
3237  * the eagles does not use the standard muxsel-bits but
3238  * has its own multiplexer */
3239 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3240 {
3241         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3242         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3243
3244        /* composite */
3245        /* set chroma ADC to sleep */
3246        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3247        /* set to composite video */
3248        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3249        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3250
3251        /* switch sync drive off */
3252        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3253 }
3254
3255 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3256 {
3257         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3258         gpio_write(masks[input%4]);
3259 }
3260
3261 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3262    alarms output
3263
3264    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3265    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3266
3267    IN - sensor inputs, INx - sensor inputs and TI XORed together
3268    O1,O2,O3 - alarm outputs (relays)
3269
3270    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3271
3272 */
3273
3274 static void init_lmlbt4x(struct bttv *btv)
3275 {
3276         printk(KERN_DEBUG "LMLBT4x init\n");
3277         btwrite(0x000000, BT848_GPIO_REG_INP);
3278         gpio_inout(0xffffff, 0x0006C0);
3279         gpio_write(0x000000);
3280 }
3281
3282 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3283 {
3284         unsigned int inmux = input % 8;
3285         gpio_inout( 0xf, 0xf );
3286         gpio_bits( 0xf, inmux );
3287 }
3288
3289 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3290 {
3291         unsigned int inmux = input % 4;
3292         gpio_inout( 3<<9, 3<<9 );
3293         gpio_bits( 3<<9, inmux<<9 );
3294 }
3295
3296 /* ----------------------------------------------------------------------- */
3297
3298 static void bttv_reset_audio(struct bttv *btv)
3299 {
3300         /*
3301          * BT878A has a audio-reset register.
3302          * 1. This register is an audio reset function but it is in
3303          *    function-0 (video capture) address space.
3304          * 2. It is enough to do this once per power-up of the card.
3305          * 3. There is a typo in the Conexant doc -- it is not at
3306          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3307          * --//Shrikumar 030609
3308          */
3309         if (btv->id != 878)
3310                 return;
3311
3312         if (bttv_debug)
3313                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3314         btwrite((1<<7), 0x058);
3315         udelay(10);
3316         btwrite(     0, 0x058);
3317 }
3318
3319 /* initialization part one -- before registering i2c bus */
3320 void __devinit bttv_init_card1(struct bttv *btv)
3321 {
3322         switch (btv->c.type) {
3323         case BTTV_BOARD_HAUPPAUGE:
3324         case BTTV_BOARD_HAUPPAUGE878:
3325                 boot_msp34xx(btv,5);
3326                 break;
3327         case BTTV_BOARD_VOODOOTV_200:
3328         case BTTV_BOARD_VOODOOTV_FM:
3329                 boot_msp34xx(btv,20);
3330                 break;
3331         case BTTV_BOARD_AVERMEDIA98:
3332                 boot_msp34xx(btv,11);
3333                 break;
3334         case BTTV_BOARD_HAUPPAUGEPVR:
3335                 pvr_boot(btv);
3336                 break;
3337         case BTTV_BOARD_TWINHAN_DST:
3338         case BTTV_BOARD_AVDVBT_771:
3339         case BTTV_BOARD_PINNACLESAT:
3340                 btv->use_i2c_hw = 1;
3341                 break;
3342         case BTTV_BOARD_ADLINK_RTV24:
3343                 init_RTV24( btv );
3344                 break;
3345
3346         }
3347         if (!bttv_tvcards[btv->c.type].has_dvb)
3348                 bttv_reset_audio(btv);
3349 }
3350
3351 /* initialization part two -- after registering i2c bus */
3352 void __devinit bttv_init_card2(struct bttv *btv)
3353 {
3354         int tda9887;
3355         int addr=ADDR_UNSET;
3356
3357         btv->tuner_type = -1;
3358
3359         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3360                 bttv_readee(btv,eeprom_data,0xa0);
3361                 identify_by_eeprom(btv,eeprom_data);
3362         }
3363
3364         switch (btv->c.type) {
3365         case BTTV_BOARD_MIRO:
3366         case BTTV_BOARD_MIROPRO:
3367         case BTTV_BOARD_PINNACLE:
3368         case BTTV_BOARD_PINNACLEPRO:
3369                 /* miro/pinnacle */
3370                 miro_pinnacle_gpio(btv);
3371                 break;
3372         case BTTV_BOARD_FLYVIDEO_98:
3373         case BTTV_BOARD_MAXI:
3374         case BTTV_BOARD_LIFE_FLYKIT:
3375         case BTTV_BOARD_FLYVIDEO:
3376         case BTTV_BOARD_TYPHOON_TVIEW:
3377         case BTTV_BOARD_CHRONOS_VS2:
3378         case BTTV_BOARD_FLYVIDEO_98FM:
3379         case BTTV_BOARD_FLYVIDEO2000:
3380         case BTTV_BOARD_FLYVIDEO98EZ:
3381         case BTTV_BOARD_CONFERENCETV:
3382         case BTTV_BOARD_LIFETEC_9415:
3383                 flyvideo_gpio(btv);
3384                 break;
3385         case BTTV_BOARD_HAUPPAUGE:
3386         case BTTV_BOARD_HAUPPAUGE878:
3387         case BTTV_BOARD_HAUPPAUGEPVR:
3388                 /* pick up some config infos from the eeprom */
3389                 bttv_readee(btv,eeprom_data,0xa0);
3390                 hauppauge_eeprom(btv);
3391                 break;
3392         case BTTV_BOARD_AVERMEDIA98:
3393         case BTTV_BOARD_AVPHONE98:
3394                 bttv_readee(btv,eeprom_data,0xa0);
3395                 avermedia_eeprom(btv);
3396                 break;
3397         case BTTV_BOARD_PXC200:
3398                 init_PXC200(btv);
3399                 break;
3400         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3401                 picolo_tetra_init(btv);
3402                 break;
3403         case BTTV_BOARD_VHX:
3404                 btv->has_radio    = 1;
3405                 btv->has_matchbox = 1;
3406                 btv->mbox_we      = 0x20;
3407                 btv->mbox_most    = 0;
3408                 btv->mbox_clk     = 0x08;
3409                 btv->mbox_data    = 0x10;
3410                 btv->mbox_mask    = 0x38;
3411                 break;
3412         case BTTV_BOARD_VOBIS_BOOSTAR:
3413         case BTTV_BOARD_TERRATV:
3414                 terratec_active_radio_upgrade(btv);
3415                 break;
3416         case BTTV_BOARD_MAGICTVIEW061:
3417                 if (btv->cardid == 0x3002144f) {
3418                         btv->has_radio=1;
3419                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3420                 }
3421                 break;
3422        case BTTV_BOARD_STB2:
3423                 if (btv->cardid == 0x3060121a) {
3424                         /* Fix up entry for 3DFX VoodooTV 100,
3425                            which is an OEM STB card variant. */
3426                         btv->has_radio=0;
3427                         btv->tuner_type=TUNER_TEMIC_NTSC;
3428                 }
3429                 break;
3430         case BTTV_BOARD_OSPREY1x0:
3431         case BTTV_BOARD_OSPREY1x0_848:
3432         case BTTV_BOARD_OSPREY101_848:
3433         case BTTV_BOARD_OSPREY1x1:
3434         case BTTV_BOARD_OSPREY1x1_SVID:
3435         case BTTV_BOARD_OSPREY2xx:
3436         case BTTV_BOARD_OSPREY2x0_SVID:
3437         case BTTV_BOARD_OSPREY2x0:
3438         case BTTV_BOARD_OSPREY500:
3439         case BTTV_BOARD_OSPREY540:
3440         case BTTV_BOARD_OSPREY2000:
3441                 bttv_readee(btv,eeprom_data,0xa0);
3442                 osprey_eeprom(btv);
3443                 break;
3444         case BTTV_BOARD_IDS_EAGLE:
3445                 init_ids_eagle(btv);
3446                 break;
3447         case BTTV_BOARD_MODTEC_205:
3448                 bttv_readee(btv,eeprom_data,0xa0);
3449                 modtec_eeprom(btv);
3450                 break;
3451         case BTTV_BOARD_LMLBT4:
3452                 init_lmlbt4x(btv);
3453                 break;
3454         case BTTV_BOARD_TIBET_CS16:
3455                 tibetCS16_init(btv);
3456                 break;
3457         case BTTV_BOARD_KODICOM_4400R:
3458                 kodicom4400r_init(btv);
3459                 break;
3460         }
3461
3462         /* pll configuration */
3463         if (!(btv->id==848 && btv->revision==0x11)) {
3464                 /* defaults from card list */
3465                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3466                         btv->pll.pll_ifreq=28636363;
3467                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3468                 }
3469                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3470                         btv->pll.pll_ifreq=35468950;
3471                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3472                 }
3473                 /* insmod options can override */
3474                 switch (pll[btv->c.nr]) {
3475                 case 0: /* none */
3476                         btv->pll.pll_crystal = 0;
3477                         btv->pll.pll_ifreq   = 0;
3478                         btv->pll.pll_ofreq   = 0;
3479                         break;
3480                 case 1: /* 28 MHz */
3481                 case 28:
3482                         btv->pll.pll_ifreq   = 28636363;
3483                         btv->pll.pll_ofreq   = 0;
3484                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3485                         break;
3486                 case 2: /* 35 MHz */
3487                 case 35:
3488                         btv->pll.pll_ifreq   = 35468950;
3489                         btv->pll.pll_ofreq   = 0;
3490                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3491                         break;
3492                 }
3493         }
3494         btv->pll.pll_current = -1;
3495
3496         /* tuner configuration (from card list / autodetect / insmod option) */
3497         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3498                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3499
3500         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3501                 if(UNSET == btv->tuner_type)
3502                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3503         if (UNSET != tuner[btv->c.nr])
3504                 btv->tuner_type = tuner[btv->c.nr];
3505         printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3506
3507         if (btv->tuner_type != UNSET) {
3508                 struct tuner_setup tun_setup;
3509
3510                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3511                 tun_setup.type = btv->tuner_type;
3512                 tun_setup.addr = addr;
3513
3514                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3515         }
3516
3517         if (btv->tda9887_conf) {
3518                 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3519                                                         &btv->tda9887_conf);
3520         }
3521
3522         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3523         if (svhs[btv->c.nr] != UNSET)
3524                 btv->svhs = svhs[btv->c.nr];
3525         if (remote[btv->c.nr] != UNSET)
3526                 btv->has_remote = remote[btv->c.nr];
3527
3528         if (bttv_tvcards[btv->c.type].has_radio)
3529                 btv->has_radio=1;
3530         if (bttv_tvcards[btv->c.type].has_remote)
3531                 btv->has_remote=1;
3532         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3533                 btv->gpioirq=1;
3534         if (bttv_tvcards[btv->c.type].audio_hook)
3535                 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3536
3537         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3538                 /* detect Bt832 chip for quartzsight digital camera */
3539                 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3540                     (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3541                         boot_bt832(btv);
3542         }
3543
3544         if (!autoload)
3545                 return;
3546
3547         /* try to detect audio/fader chips */
3548         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3549             bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3550                 request_module("msp3400");
3551
3552         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3553             bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3554                 request_module("msp3400");
3555
3556         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3557             bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3558                 request_module("tda9875");
3559
3560         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3561             bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3562                 request_module("tda7432");
3563
3564         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3565                 request_module("tvaudio");
3566
3567         /* tuner modules */
3568         tda9887 = 0;
3569         if (btv->tda9887_conf)
3570                 tda9887 = 1;
3571         if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3572             bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3573                 tda9887 = 1;
3574         /* Hybrid DVB card, DOES have a tda9887 */
3575         if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3576                 tda9887 = 1;
3577         if (btv->tuner_type != UNSET)
3578                 request_module("tuner");
3579 }
3580
3581
3582 /* ----------------------------------------------------------------------- */
3583
3584 static void modtec_eeprom(struct bttv *btv)
3585 {
3586         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3587                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3588                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3589                        btv->c.nr,&eeprom_data[0x1e]);
3590         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3591                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3592                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3593                        btv->c.nr,&eeprom_data[0x1e]);
3594         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3595                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3596                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3597                        btv->c.nr,&eeprom_data[0x1e]);
3598         } else {
3599                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3600                        btv->c.nr,&eeprom_data[0x1e]);
3601         }
3602 }
3603
3604 static void __devinit hauppauge_eeprom(struct bttv *btv)
3605 {
3606         struct tveeprom tv;
3607
3608         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3609         btv->tuner_type = tv.tuner_type;
3610         btv->has_radio  = tv.has_radio;
3611
3612         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3613                 btv->c.nr, tv.model);
3614
3615         /*
3616          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3617          * type based on model #.
3618          */
3619         if(tv.model == 64900) {
3620                 printk("bttv%d: Switching board type from %s to %s\n",
3621                         btv->c.nr,
3622                         bttv_tvcards[btv->c.type].name,
3623                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3624                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3625         }
3626 }
3627
3628 static int terratec_active_radio_upgrade(struct bttv *btv)
3629 {
3630         int freq;
3631
3632         btv->has_radio    = 1;
3633         btv->has_matchbox = 1;
3634         btv->mbox_we      = 0x10;
3635         btv->mbox_most    = 0x20;
3636         btv->mbox_clk     = 0x08;
3637         btv->mbox_data    = 0x04;
3638         btv->mbox_mask    = 0x3c;
3639
3640         btv->mbox_iow     = 1 <<  8;
3641         btv->mbox_ior     = 1 <<  9;
3642         btv->mbox_csel    = 1 << 10;
3643
3644         freq=88000/62.5;
3645         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3646         if (0x1ed8 == tea5757_read(btv)) {
3647                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3648                        btv->c.nr);
3649                 btv->has_radio    = 1;
3650                 btv->has_matchbox = 1;
3651         } else {
3652                 btv->has_radio    = 0;
3653                 btv->has_matchbox = 0;
3654         }
3655         return 0;
3656 }
3657
3658
3659 /* ----------------------------------------------------------------------- */
3660
3661 /*
3662  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3663  *
3664  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3665  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3666  * unpacked with unzip).
3667  */
3668 #define PVR_GPIO_DELAY          10
3669
3670 #define BTTV_ALT_DATA           0x000001
3671 #define BTTV_ALT_DCLK           0x100000
3672 #define BTTV_ALT_NCONFIG        0x800000
3673
3674 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3675 {
3676         u32 n;
3677         u8 bits;
3678         int i;
3679
3680         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3681         gpio_write(0);
3682         udelay(PVR_GPIO_DELAY);
3683
3684         gpio_write(BTTV_ALT_NCONFIG);
3685         udelay(PVR_GPIO_DELAY);
3686
3687         for (n = 0; n < microlen; n++) {
3688                 bits = micro[n];
3689                 for (i = 0 ; i < 8 ; i++) {
3690                         gpio_bits(BTTV_ALT_DCLK,0);
3691                         if (bits & 0x01)
3692                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3693                         else
3694                                 gpio_bits(BTTV_ALT_DATA,0);
3695                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3696                         bits >>= 1;
3697                 }
3698         }
3699         gpio_bits(BTTV_ALT_DCLK,0);
3700         udelay(PVR_GPIO_DELAY);
3701
3702         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3703         for (i = 0 ; i < 30 ; i++) {
3704                 gpio_bits(BTTV_ALT_DCLK,0);
3705                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3706         }
3707         gpio_bits(BTTV_ALT_DCLK,0);
3708         return 0;
3709 }
3710
3711 static int __devinit pvr_boot(struct bttv *btv)
3712 {
3713         const struct firmware *fw_entry;
3714         int rc;
3715
3716         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3717         if (rc != 0) {
3718                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3719                        btv->c.nr);
3720                 return rc;
3721         }
3722         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3723         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3724                btv->c.nr, (rc < 0) ? "failed" : "ok");
3725         release_firmware(fw_entry);
3726         return rc;
3727 }
3728
3729 /* ----------------------------------------------------------------------- */
3730 /* some osprey specific stuff                                              */
3731
3732 static void __devinit osprey_eeprom(struct bttv *btv)
3733 {
3734        int i = 0;
3735        unsigned char *ee = eeprom_data;
3736        unsigned long serial = 0;
3737
3738        if (btv->c.type == 0) {
3739                /* this might be an antique... check for MMAC label in eeprom */
3740                if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3741                        unsigned char checksum = 0;
3742                        for (i = 0; i < 21; i++)
3743                                checksum += ee[i];
3744                        if (checksum != ee[21])
3745                                return;
3746                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3747                        for (i = 12; i < 21; i++)
3748                                serial *= 10, serial += ee[i] - '0';
3749                }
3750        } else {
3751                unsigned short type;
3752                int offset = 4*16;
3753
3754                for (; offset < 8*16; offset += 16) {
3755                        unsigned short checksum = 0;
3756                        /* verify the checksum */
3757                        for (i = 0; i < 14; i++)
3758                                 checksum += ee[i+offset];
3759                         checksum = ~checksum;  /* no idea why */
3760                         if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3761                                    ((checksum & 0x0FF) == ee[offset+15])) {
3762                                break;
3763                        }
3764                }
3765
3766                if (offset >= 8*16)
3767                        return;
3768
3769                /* found a valid descriptor */
3770                type = (ee[offset+4]<<8) | (ee[offset+5]);
3771
3772                switch(type) {
3773                /* 848 based */
3774                case 0x0004:
3775                        btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3776                        break;
3777                case 0x0005:
3778                        btv->c.type = BTTV_BOARD_OSPREY101_848;
3779                        break;
3780
3781                /* 878 based */
3782                case 0x0012:
3783                case 0x0013:
3784                        btv->c.type = BTTV_BOARD_OSPREY1x0;
3785                        break;
3786                case 0x0014:
3787                case 0x0015:
3788                        btv->c.type = BTTV_BOARD_OSPREY1x1;
3789                        break;
3790                case 0x0016:
3791                case 0x0017:
3792                case 0x0020:
3793                        btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3794                        break;
3795                case 0x0018:
3796                case 0x0019:
3797                case 0x001E:
3798                case 0x001F:
3799                        btv->c.type = BTTV_BOARD_OSPREY2xx;
3800                        break;
3801                case 0x001A:
3802                case 0x001B:
3803                        btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3804                        break;
3805                case 0x0040:
3806                        btv->c.type = BTTV_BOARD_OSPREY500;
3807                        break;
3808                case 0x0050:
3809                case 0x0056:
3810                        btv->c.type = BTTV_BOARD_OSPREY540;
3811                        /* bttv_osprey_540_init(btv); */
3812                        break;
3813                case 0x0060:
3814                case 0x0070:
3815                case 0x00A0:
3816                        btv->c.type = BTTV_BOARD_OSPREY2x0;
3817                        /* enable output on select control lines */
3818                        gpio_inout(0xffffff,0x000303);
3819                        break;
3820                default:
3821                        /* unknown...leave generic, but get serial # */
3822                        break;
3823                }
3824                serial =  (ee[offset+6] << 24)
3825                        | (ee[offset+7] << 16)
3826                        | (ee[offset+8] <<  8)
3827                        | (ee[offset+9]);
3828        }
3829
3830        printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3831               btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3832 }
3833
3834 /* ----------------------------------------------------------------------- */
3835 /* AVermedia specific stuff, from  bktr_card.c                             */
3836
3837 static int tuner_0_table[] = {
3838         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3839         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3840         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3841         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3842         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3843         TUNER_PHILIPS_FM1216ME_MK3 };
3844
3845 static int tuner_1_table[] = {
3846         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3847         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3848         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3849         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3850         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3851
3852 static void __devinit avermedia_eeprom(struct bttv *btv)
3853 {
3854         int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3855
3856         tuner_make      = (eeprom_data[0x41] & 0x7);
3857         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3858         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3859         btv->has_remote = (eeprom_data[0x42] & 0x01);
3860
3861         if (tuner_make == 0 || tuner_make == 2)
3862                 if(tuner_format <=0x0a)
3863                         tuner = tuner_0_table[tuner_format];
3864         if (tuner_make == 1)
3865                 if(tuner_format <=9)
3866                         tuner = tuner_1_table[tuner_format];
3867
3868         if (tuner_make == 4)
3869                 if(tuner_format == 0x09)
3870                         tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3871
3872         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3873                 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3874         if(tuner) {
3875                 btv->tuner_type=tuner;
3876                 printk("%d",tuner);
3877         } else
3878                 printk("Unknown type");
3879         printk(" radio:%s remote control:%s\n",
3880                tuner_tv_fm     ? "yes" : "no",
3881                btv->has_remote ? "yes" : "no");
3882 }
3883
3884 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3885 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3886 {
3887         /* fix up our card entry */
3888         if(norm==VIDEO_MODE_NTSC) {
3889                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3890                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3891                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3892                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
3893                 dprintk("bttv_tda9880_setnorm to NTSC\n");
3894         }
3895         else {
3896                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3897                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3898                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3899                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
3900                 dprintk("bttv_tda9880_setnorm to PAL\n");
3901         }
3902         /* set GPIO according */
3903         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3904                   bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3905 }
3906
3907
3908 /*
3909  * reset/enable the MSP on some Hauppauge cards
3910  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3911  *
3912  * Hauppauge:  pin  5
3913  * Voodoo:     pin 20
3914  */
3915 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3916 {
3917         int mask = (1 << pin);
3918
3919         gpio_inout(mask,mask);
3920         gpio_bits(mask,0);
3921         udelay(2500);
3922         gpio_bits(mask,mask);
3923
3924         if (bttv_gpio)
3925                 bttv_gpio_tracking(btv,"msp34xx");
3926         if (bttv_verbose)
3927                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3928                        "init [%d]\n", btv->c.nr, pin);
3929 }
3930
3931 static void __devinit boot_bt832(struct bttv *btv)
3932 {
3933 }
3934
3935 /* ----------------------------------------------------------------------- */
3936 /*  Imagenation L-Model PXC200 Framegrabber */
3937 /*  This is basically the same procedure as
3938  *  used by Alessandro Rubini in his pxc200
3939  *  driver, but using BTTV functions */
3940
3941 static void __devinit init_PXC200(struct bttv *btv)
3942 {
3943         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3944                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3945                                             0x00 };
3946         unsigned int i;
3947         int tmp;
3948         u32 val;
3949
3950         /* Initialise GPIO-connevted stuff */
3951         gpio_inout(0xffffff, (1<<13));
3952         gpio_write(0);
3953         udelay(3);
3954         gpio_write(1<<13);
3955         /* GPIO inputs are pulled up, so no need to drive
3956          * reset pin any longer */
3957         gpio_bits(0xffffff, 0);
3958         if (bttv_gpio)
3959                 bttv_gpio_tracking(btv,"pxc200");
3960
3961         /*  we could/should try and reset/control the AD pots? but
3962             right now  we simply  turned off the crushing.  Without
3963             this the AGC drifts drifts
3964             remember the EN is reverse logic -->
3965             setting BT848_ADC_AGC_EN disable the AGC
3966             tboult@eecs.lehigh.edu
3967         */
3968
3969         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3970
3971         /*      Initialise MAX517 DAC */
3972         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3973         bttv_I2CWrite(btv,0x5E,0,0x80,1);
3974
3975         /*      Initialise 12C508 PIC */
3976         /*      The I2CWrite and I2CRead commmands are actually to the
3977          *      same chips - but the R/W bit is included in the address
3978          *      argument so the numbers are different */
3979
3980
3981         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3982
3983         /* First of all, enable the clock line. This is used in the PXC200-F */
3984         val = btread(BT848_GPIO_DMA_CTL);
3985         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3986         btwrite(val, BT848_GPIO_DMA_CTL);
3987
3988         /* Then, push to 0 the reset pin long enough to reset the *
3989          * device same as above for the reset line, but not the same
3990          * value sent to the GPIO-connected stuff
3991          * which one is the good one? */
3992         gpio_inout(0xffffff,(1<<2));
3993         gpio_write(0);
3994         udelay(10);
3995         gpio_write(1<<2);
3996
3997         for (i = 0; i < ARRAY_SIZE(vals); i++) {
3998                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3999                 if (tmp != -1) {
4000                         printk(KERN_INFO
4001                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4002                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4003                 }
4004         }
4005
4006         printk(KERN_INFO "PXC200 Initialised.\n");
4007 }
4008
4009
4010
4011 /* ----------------------------------------------------------------------- */
4012 /*
4013  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4014  *  it. This apparently involves the following procedure for each 878 chip:
4015  *
4016  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4017  *
4018  *  2)  write to GPIO_DATA
4019  *      - 0x0E
4020  *      - sleep 1ms
4021  *      - 0x10 + 0x0E
4022  *      - sleep 10ms
4023  *      - 0x0E
4024  *     read from GPIO_DATA into buf (uint_32)
4025  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4026  *                 error. ERROR_CPLD_Check_Failed stop.
4027  *
4028  *  3) write to GPIO_DATA
4029  *      - write 0x4400 + 0x0E
4030  *      - sleep 10ms
4031  *      - write 0x4410 + 0x0E
4032  *      - sleep 1ms
4033  *      - write 0x0E
4034  *     read from GPIO_DATA into buf (uint_32)
4035  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4036  *                error. ERROR_CPLD_Check_Failed.
4037  */
4038 /* ----------------------------------------------------------------------- */
4039 static void
4040 init_RTV24 (struct bttv *btv)
4041 {
4042         uint32_t dataRead = 0;
4043         long watchdog_value = 0x0E;
4044
4045         printk (KERN_INFO
4046                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4047                 btv->c.nr);
4048
4049         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4050
4051         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4052         msleep (1);
4053         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4054         msleep (10);
4055         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4056
4057         dataRead = btread (BT848_GPIO_DATA);
4058
4059         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4060                 printk (KERN_INFO
4061                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4062                         btv->c.nr, dataRead);
4063         }
4064
4065         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4066         msleep (10);
4067         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4068         msleep (1);
4069         btwrite (watchdog_value, BT848_GPIO_DATA);
4070         msleep (1);
4071         dataRead = btread (BT848_GPIO_DATA);
4072
4073         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4074                 printk (KERN_INFO
4075                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4076                         btv->c.nr, dataRead);
4077
4078                 return;
4079         }
4080
4081         printk (KERN_INFO
4082                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4083 }
4084
4085
4086
4087 /* ----------------------------------------------------------------------- */
4088 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4089 /*
4090  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4091  * This code is placed under the terms of the GNU General Public License
4092  *
4093  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4094  */
4095
4096 static void bus_low(struct bttv *btv, int bit)
4097 {
4098         if (btv->mbox_ior) {
4099                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4100                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4101                 udelay(5);
4102         }
4103
4104         gpio_bits(bit,0);
4105         udelay(5);
4106
4107         if (btv->mbox_ior) {
4108                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4109                 udelay(5);
4110         }
4111 }
4112
4113 static void bus_high(struct bttv *btv, int bit)
4114 {
4115         if (btv->mbox_ior) {
4116                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4117                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4118                 udelay(5);
4119         }
4120
4121         gpio_bits(bit,bit);
4122         udelay(5);
4123
4124         if (btv->mbox_ior) {
4125                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4126                 udelay(5);
4127         }
4128 }
4129
4130 static int bus_in(struct bttv *btv, int bit)
4131 {
4132         if (btv->mbox_ior) {
4133                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4134                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4135                 udelay(5);
4136
4137                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4138                 udelay(5);
4139         }
4140         return gpio_read() & (bit);
4141 }
4142
4143 /* TEA5757 register bits */
4144 #define TEA_FREQ                0:14
4145 #define TEA_BUFFER              15:15
4146
4147 #define TEA_SIGNAL_STRENGTH     16:17
4148
4149 #define TEA_PORT1               18:18
4150 #define TEA_PORT0               19:19
4151
4152 #define TEA_BAND                20:21
4153 #define TEA_BAND_FM             0
4154 #define TEA_BAND_MW             1
4155 #define TEA_BAND_LW             2
4156 #define TEA_BAND_SW             3
4157
4158 #define TEA_MONO                22:22
4159 #define TEA_ALLOW_STEREO        0
4160 #define TEA_FORCE_MONO          1
4161
4162 #define TEA_SEARCH_DIRECTION    23:23
4163 #define TEA_SEARCH_DOWN         0
4164 #define TEA_SEARCH_UP           1
4165
4166 #define TEA_STATUS              24:24
4167 #define TEA_STATUS_TUNED        0
4168 #define TEA_STATUS_SEARCHING    1
4169
4170 /* Low-level stuff */
4171 static int tea5757_read(struct bttv *btv)
4172 {
4173         unsigned long timeout;
4174         int value = 0;
4175         int i;
4176
4177         /* better safe than sorry */
4178         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4179
4180         if (btv->mbox_ior) {
4181                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4182                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4183                 udelay(5);
4184         }
4185
4186         if (bttv_gpio)
4187                 bttv_gpio_tracking(btv,"tea5757 read");
4188
4189         bus_low(btv,btv->mbox_we);
4190         bus_low(btv,btv->mbox_clk);
4191
4192         udelay(10);
4193         timeout= jiffies + HZ;
4194
4195         /* wait for DATA line to go low; error if it doesn't */
4196         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4197                 schedule();
4198         if (bus_in(btv,btv->mbox_data)) {
4199                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4200                 return -1;
4201         }
4202
4203         dprintk("bttv%d: tea5757:",btv->c.nr);
4204         for (i = 0; i < 24; i++) {
4205                 udelay(5);
4206                 bus_high(btv,btv->mbox_clk);
4207                 udelay(5);
4208                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4209                 bus_low(btv,btv->mbox_clk);
4210                 value <<= 1;
4211                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4212                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4213         }
4214         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4215         return value;
4216 }
4217
4218 static int tea5757_write(struct bttv *btv, int value)
4219 {
4220         int i;
4221         int reg = value;
4222
4223         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4224
4225         if (btv->mbox_ior) {
4226                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4227                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4228                 udelay(5);
4229         }
4230         if (bttv_gpio)
4231                 bttv_gpio_tracking(btv,"tea5757 write");
4232
4233         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4234         bus_low(btv,btv->mbox_clk);
4235         bus_high(btv,btv->mbox_we);
4236         for (i = 0; i < 25; i++) {
4237                 if (reg & 0x1000000)
4238                         bus_high(btv,btv->mbox_data);
4239                 else
4240                         bus_low(btv,btv->mbox_data);
4241                 reg <<= 1;
4242                 bus_high(btv,btv->mbox_clk);
4243                 udelay(10);
4244                 bus_low(btv,btv->mbox_clk);
4245                 udelay(10);
4246         }
4247         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4248         return 0;
4249 }
4250
4251 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4252 {
4253         dprintk("tea5757_set_freq %d\n",freq);
4254         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4255 }
4256
4257
4258 /* ----------------------------------------------------------------------- */
4259 /* winview                                                                 */
4260
4261 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4262 {
4263         /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4264         int bits_out, loops, vol, data;
4265
4266         if (!set) {
4267                 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4268                 v->flags |= VIDEO_AUDIO_VOLUME;
4269                 return;
4270         }
4271
4272         /* 32 levels logarithmic */
4273         vol = 32 - ((v->volume>>11));
4274         /* units */
4275         bits_out = (PT2254_DBS_IN_2>>(vol%5));
4276         /* tens */
4277         bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4278         bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4279         data = gpio_read();
4280         data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4281                   WINVIEW_PT2254_STROBE);
4282         for (loops = 17; loops >= 0 ; loops--) {
4283                 if (bits_out & (1<<loops))
4284                         data |=  WINVIEW_PT2254_DATA;
4285                 else
4286                         data &= ~WINVIEW_PT2254_DATA;
4287                 gpio_write(data);
4288                 udelay(5);
4289                 data |= WINVIEW_PT2254_CLK;
4290                 gpio_write(data);
4291                 udelay(5);
4292                 data &= ~WINVIEW_PT2254_CLK;
4293                 gpio_write(data);
4294         }
4295         data |=  WINVIEW_PT2254_STROBE;
4296         data &= ~WINVIEW_PT2254_DATA;
4297         gpio_write(data);
4298         udelay(10);
4299         data &= ~WINVIEW_PT2254_STROBE;
4300         gpio_write(data);
4301 }
4302
4303 /* ----------------------------------------------------------------------- */
4304 /* mono/stereo control for various cards (which don't use i2c chips but    */
4305 /* connect something to the GPIO pins                                      */
4306
4307 static void
4308 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4309 {
4310         unsigned int con = 0;
4311
4312         if (set) {
4313                 gpio_inout(0x300, 0x300);
4314                 if (v->mode & VIDEO_SOUND_LANG1)
4315                         con = 0x000;
4316                 if (v->mode & VIDEO_SOUND_LANG2)
4317                         con = 0x300;
4318                 if (v->mode & VIDEO_SOUND_STEREO)
4319                         con = 0x200;
4320 /*              if (v->mode & VIDEO_SOUND_MONO)
4321  *                      con = 0x100; */
4322                 gpio_bits(0x300, con);
4323         } else {
4324                 v->mode = VIDEO_SOUND_STEREO |
4325                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4326         }
4327 }
4328
4329 static void
4330 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4331 {
4332         unsigned int val, con;
4333
4334         if (btv->radio_user)
4335                 return;
4336
4337         val = gpio_read();
4338         if (set) {
4339                 con = 0x000;
4340                 if (v->mode & VIDEO_SOUND_LANG2) {
4341                         if (v->mode & VIDEO_SOUND_LANG1) {
4342                                 /* LANG1 + LANG2 */
4343                                 con = 0x100;
4344                         }
4345                         else {
4346                                 /* LANG2 */
4347                                 con = 0x300;
4348                         }
4349                 }
4350                 if (con != (val & 0x300)) {
4351                         gpio_bits(0x300, con);
4352                         if (bttv_gpio)
4353                                 bttv_gpio_tracking(btv,"gvbctv5pci");
4354                 }
4355         } else {
4356                 switch (val & 0x70) {
4357                   case 0x10:
4358                         v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4359                         break;
4360                   case 0x30:
4361                         v->mode = VIDEO_SOUND_LANG2;
4362                         break;
4363                   case 0x50:
4364                         v->mode = VIDEO_SOUND_LANG1;
4365                         break;
4366                   case 0x60:
4367                         v->mode = VIDEO_SOUND_STEREO;
4368                         break;
4369                   case 0x70:
4370                         v->mode = VIDEO_SOUND_MONO;
4371                         break;
4372                   default:
4373                         v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4374                                   VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4375                 }
4376         }
4377 }
4378
4379 /*
4380  * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4381  *  I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4382  *  0xdde enables mono and 0xccd enables sap
4383  *
4384  * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4385  *  P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4386  *  input/output sound connection, so both must be set for output mode.
4387  *
4388  * Looks like it's needed only for the "tvphone", the "tvphone 98"
4389  * handles this with a tda9840
4390  *
4391  */
4392 static void
4393 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4394 {
4395         int val = 0;
4396
4397         if (set) {
4398                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4399                         val = 0x02;
4400                 if (v->mode & VIDEO_SOUND_STEREO)
4401                         val = 0x01;
4402                 if (val) {
4403                         gpio_bits(0x03,val);
4404                         if (bttv_gpio)
4405                                 bttv_gpio_tracking(btv,"avermedia");
4406                 }
4407         } else {
4408                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4409                         VIDEO_SOUND_LANG1;
4410                 return;
4411         }
4412 }
4413
4414 static void
4415 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4416 {
4417         int val = 0;
4418
4419         if (set) {
4420                 if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
4421                         val = 0x01;
4422                 if (v->mode & VIDEO_SOUND_STEREO)  /* STEREO */
4423                         val = 0x02;
4424                 btaor(val, ~0x03, BT848_GPIO_DATA);
4425                 if (bttv_gpio)
4426                         bttv_gpio_tracking(btv,"avermedia");
4427         } else {
4428                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4429                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4430                 return;
4431         }
4432 }
4433
4434 /* Lifetec 9415 handling */
4435 static void
4436 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4437 {
4438         int val = 0;
4439
4440         if (gpio_read() & 0x4000) {
4441                 v->mode = VIDEO_SOUND_MONO;
4442                 return;
4443         }
4444
4445         if (set) {
4446                 if (v->mode & VIDEO_SOUND_LANG2)  /* A2 SAP */
4447                         val = 0x0080;
4448                 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4449                         val = 0x0880;
4450                 if ((v->mode & VIDEO_SOUND_LANG1) ||
4451                     (v->mode & VIDEO_SOUND_MONO))
4452                         val = 0;
4453                 gpio_bits(0x0880, val);
4454                 if (bttv_gpio)
4455                         bttv_gpio_tracking(btv,"lt9415");
4456         } else {
4457                 /* autodetect doesn't work with this card :-( */
4458                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4459                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4460                 return;
4461         }
4462 }
4463
4464 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4465 static void
4466 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4467 {
4468         unsigned int con = 0;
4469
4470         if (set) {
4471                 gpio_inout(0x180000,0x180000);
4472                 if (v->mode & VIDEO_SOUND_LANG2)
4473                         con = 0x080000;
4474                 if (v->mode & VIDEO_SOUND_STEREO)
4475                         con = 0x180000;
4476                 gpio_bits(0x180000, con);
4477                 if (bttv_gpio)
4478                         bttv_gpio_tracking(btv,"terratv");
4479         } else {
4480                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4481                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4482         }
4483 }
4484
4485 static void
4486 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4487 {
4488         unsigned long val = 0;
4489
4490         if (set) {
4491                 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4492                 if (v->mode & VIDEO_SOUND_MONO)         /* Mono */
4493                         val = 0x420000;
4494                 if (v->mode & VIDEO_SOUND_LANG1)        /* Mono */
4495                         val = 0x420000;
4496                 if (v->mode & VIDEO_SOUND_LANG2)        /* SAP */
4497                         val = 0x410000;
4498                 if (v->mode & VIDEO_SOUND_STEREO)       /* Stereo */
4499                         val = 0x020000;
4500                 if (val) {
4501                         gpio_bits(0x430000, val);
4502                         if (bttv_gpio)
4503                                 bttv_gpio_tracking(btv,"winfast2000");
4504                 }
4505         } else {
4506                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4507                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4508         }
4509 }
4510
4511 /*
4512  * Dariusz Kowalewski <darekk@automex.pl>
4513  * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4514  * revision 9B has on-board TDA9874A sound decoder).
4515  *
4516  * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4517  *       will mute this cards.
4518  */
4519 static void
4520 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4521 {
4522         unsigned int val = 0;
4523
4524         if (btv->radio_user)
4525                 return;
4526
4527         if (set) {
4528                 if (v->mode & VIDEO_SOUND_MONO) {
4529                         val = 0x01;
4530                 }
4531                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4532                     || (v->mode & VIDEO_SOUND_STEREO)) {
4533                         val = 0x02;
4534                 }
4535                 if (val) {
4536                         gpio_bits(0x03,val);
4537                         if (bttv_gpio)
4538                                 bttv_gpio_tracking(btv,"pvbt878p9b");
4539                 }
4540         } else {
4541                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4542                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4543         }
4544 }
4545
4546 /*
4547  * Dariusz Kowalewski <darekk@automex.pl>
4548  * sound control for FlyVideo 2000S (with tda9874 decoder)
4549  * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4550  */
4551 static void
4552 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4553 {
4554         unsigned int val = 0xffff;
4555
4556         if (btv->radio_user)
4557                 return;
4558         if (set) {
4559                 if (v->mode & VIDEO_SOUND_MONO) {
4560                         val = 0x0000;
4561                 }
4562                 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4563                     || (v->mode & VIDEO_SOUND_STEREO)) {
4564                         val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4565                 }
4566                 if (val != 0xffff) {
4567                         gpio_bits(0x1800, val);
4568                         if (bttv_gpio)
4569                                 bttv_gpio_tracking(btv,"fv2000s");
4570                 }
4571         } else {
4572                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4573                         VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4574         }
4575 }
4576
4577 /*
4578  * sound control for Canopus WinDVR PCI
4579  * Masaki Suzuki <masaki@btree.org>
4580  */
4581 static void
4582 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4583 {
4584         unsigned long val = 0;
4585
4586         if (set) {
4587                 if (v->mode & VIDEO_SOUND_MONO)
4588                         val = 0x040000;
4589                 if (v->mode & VIDEO_SOUND_LANG1)
4590                         val = 0;
4591                 if (v->mode & VIDEO_SOUND_LANG2)
4592                         val = 0x100000;
4593                 if (v->mode & VIDEO_SOUND_STEREO)
4594                         val = 0;
4595                 if (val) {
4596                         gpio_bits(0x140000, val);
4597                         if (bttv_gpio)
4598                                 bttv_gpio_tracking(btv,"windvr");
4599                 }
4600         } else {
4601                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4602                           VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4603         }
4604 }
4605
4606 /*
4607  * sound control for AD-TVK503
4608  * Hiroshi Takekawa <sian@big.or.jp>
4609  */
4610 static void
4611 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4612 {
4613         unsigned int con = 0xffffff;
4614
4615         /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4616
4617         if (set) {
4618                 /* btor(***, BT848_GPIO_OUT_EN); */
4619                 if (v->mode & VIDEO_SOUND_LANG1)
4620                         con = 0x00000000;
4621                 if (v->mode & VIDEO_SOUND_LANG2)
4622                         con = 0x00180000;
4623                 if (v->mode & VIDEO_SOUND_STEREO)
4624                         con = 0x00000000;
4625                 if (v->mode & VIDEO_SOUND_MONO)
4626                         con = 0x00060000;
4627                 if (con != 0xffffff) {
4628                         gpio_bits(0x1e0000,con);
4629                         if (bttv_gpio)
4630                                 bttv_gpio_tracking(btv, "adtvk503");
4631                 }
4632         } else {
4633                 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4634                           VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
4635         }
4636 }
4637
4638 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4639  *
4640  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4641  * switch instead (CD22M3494E). This IC can have multiple active connections
4642  * between Xn (input) and Yn (output) pins. We need to clear any existing
4643  * connection prior to establish a new one, pulsing the STROBE pin.
4644  *
4645  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4646  * GPIO pins are wired as:
4647  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4648  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4649  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroler)
4650  *  GPIO[8]   -                  - P3[5] (microcontroler)
4651  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroler)
4652  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroler)
4653  *  GPINTR    -                  - P3[4] (microcontroler)
4654  *
4655  * The microcontroler is a 80C32 like. It should be possible to change xpoint
4656  * configuration either directly (as we are doing) or using the microcontroler
4657  * which is also wired to I2C interface. I have no further info on the
4658  * microcontroler features, one would need to disassembly the firmware.
4659  * note: the vendor refused to give any information on this product, all
4660  *       that stuff was found using a multimeter! :)
4661  */
4662 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4663 {
4664         /* reset all conections */
4665         gpio_bits(0x200,0x200);
4666         mdelay(1);
4667         gpio_bits(0x200,0x000);
4668         mdelay(1);
4669
4670         /* create a new conection */
4671         gpio_bits(0x480,0x080);
4672         gpio_bits(0x480,0x480);
4673         mdelay(1);
4674         gpio_bits(0x480,0x080);
4675         mdelay(1);
4676 }
4677
4678 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4679  *
4680  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4681  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4682  * chips, ten eight input analog multiplexors, a not chip and a few
4683  * other components.
4684  *
4685  * 16 inputs on a secondary bracket are provided and can be selected
4686  * from each of the four capture chips.  Two of the eight input
4687  * multiplexors are used to select from any of the 16 input signals.
4688  *
4689  * Unsupported hardware capabilities:
4690  *  . A video output monitor on the secondary bracket can be selected from
4691  *    one of the 878A chips.
4692  *  . Another passthrough but I haven't spent any time investigating it.
4693  *  . Digital I/O (logic level connected to GPIO) is available from an
4694  *    onboard header.
4695  *
4696  * The on chip input mux should always be set to 2.
4697  * GPIO[16:19] - Video input selection
4698  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4699  * GPIO[?:?]   - Digital I/O.
4700  *
4701  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4702  * determined what function (if any) it provides.  With the microcontroller
4703  * and sync seperator chips a guess is that it might have to do with video
4704  * switching and maybe some digital I/O.
4705  */
4706 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4707 {
4708         /* video mux */
4709         gpio_bits(0x0f0000, input << 16);
4710 }
4711
4712 static void tibetCS16_init(struct bttv *btv)
4713 {
4714         /* enable gpio bits, mask obtained via btSpy */
4715         gpio_inout(0xffffff, 0x0f7fff);
4716         gpio_write(0x0f7fff);
4717 }
4718
4719 /*
4720  * The following routines for the Kodicom-4400r get a little mind-twisting.
4721  * There is a "master" controller and three "slave" controllers, together
4722  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4723  * The analog switch is controlled by the "master", but the detection order
4724  * of the four BT878A chips is in an order which I just don't understand.
4725  * The "master" is actually the second controller to be detected.  The
4726  * logic on the board uses logical numbers for the 4 controlers, but
4727  * those numbers are different from the detection sequence.  When working
4728  * with the analog switch, we need to "map" from the detection sequence
4729  * over to the board's logical controller number.  This mapping sequence
4730  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4731  * unit 3, the second (which is the master) is logical unit 0, etc.
4732  * We need to maintain the status of the analog switch (which of the 16
4733  * cameras is connected to which of the 4 controllers).  Rather than
4734  * add to the bttv structure for this, we use the data reserved for
4735  * the mbox (unused for this card type).
4736  */
4737
4738 /*
4739  * First a routine to set the analog switch, which controls which camera
4740  * is routed to which controller.  The switch comprises an X-address
4741  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4742  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4743  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4744  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4745  * specified address.  The idea is to set the address and data, then bring
4746  * STROBE high, and finally bring STROBE back to low.
4747  */
4748 static void kodicom4400r_write(struct bttv *btv,
4749                                unsigned char xaddr,
4750                                unsigned char yaddr,
4751                                unsigned char data) {
4752         unsigned int udata;
4753
4754         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4755         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4756         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4757         gpio_bits(0x1ff, udata);                /* strobe low */
4758 }
4759
4760 /*
4761  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4762  * use this routine.  The routine finds the "master" for the card, maps
4763  * the controller number from the detected position over to the logical
4764  * number, writes the appropriate data to the analog switch, and housekeeps
4765  * the local copy of the switch information.  The parameter 'input' is the
4766  * requested camera number (0 - 15).
4767  */
4768 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4769 {
4770         char *sw_status;
4771         int xaddr, yaddr;
4772         struct bttv *mctlr;
4773         static unsigned char map[4] = {3, 0, 2, 1};
4774
4775         mctlr = master[btv->c.nr];
4776         if (mctlr == NULL) {    /* ignore if master not yet detected */
4777                 return;
4778         }
4779         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4780         yaddr = map[yaddr];
4781         sw_status = (char *)(&mctlr->mbox_we);
4782         xaddr = input & 0xf;
4783         /* Check if the controller/camera pair has changed, else ignore */
4784         if (sw_status[yaddr] != xaddr)
4785         {
4786                 /* "open" the old switch, "close" the new one, save the new */
4787                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4788                 sw_status[yaddr] = xaddr;
4789                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4790         }
4791 }
4792
4793 /*
4794  * During initialisation, we need to reset the analog switch.  We
4795  * also preset the switch to map the 4 connectors on the card to the
4796  * *user's* (see above description of kodicom4400r_muxsel) channels
4797  * 0 through 3
4798  */
4799 static void kodicom4400r_init(struct bttv *btv)
4800 {
4801         char *sw_status = (char *)(&btv->mbox_we);
4802         int ix;
4803
4804         gpio_inout(0x0003ff, 0x0003ff);
4805         gpio_write(1 << 9);     /* reset MUX */
4806         gpio_write(0);
4807         /* Preset camera 0 to the 4 controllers */
4808         for (ix = 0; ix < 4; ix++) {
4809                 sw_status[ix] = ix;
4810                 kodicom4400r_write(btv, ix, ix, 1);
4811         }
4812         /*
4813          * Since this is the "master", we need to set up the
4814          * other three controller chips' pointers to this structure
4815          * for later use in the muxsel routine.
4816          */
4817         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4818             return;
4819         master[btv->c.nr-1] = btv;
4820         master[btv->c.nr]   = btv;
4821         master[btv->c.nr+1] = btv;
4822         master[btv->c.nr+2] = btv;
4823 }
4824
4825 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4826  * video multiplexers to provide up to 16 video inputs. These
4827  * multiplexers are controlled by the lower 8 GPIO pins of the
4828  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4829
4830  * xxx0 is pin xxx of multiplexer U5,
4831  * yyy1 is pin yyy of multiplexer U2
4832  */
4833 #define ENA0    0x01
4834 #define ENB0    0x02
4835 #define ENA1    0x04
4836 #define ENB1    0x08
4837
4838 #define IN10    0x10
4839 #define IN00    0x20
4840 #define IN11    0x40
4841 #define IN01    0x80
4842
4843 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4844 {
4845         static const int masks[] = {
4846                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4847                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4848                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4849                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4850         };
4851         gpio_write(masks[input%16]);
4852 }
4853 static void picolo_tetra_init(struct bttv *btv)
4854 {
4855         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4856         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4857         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4858 }
4859 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4860 {
4861
4862         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4863         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4864         /*GPIO[20]&GPIO[21] used to choose the right input*/
4865         btwrite (input<<20,BT848_GPIO_DATA);
4866
4867 }
4868
4869 /*
4870  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4871  *
4872  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4873  * swichers to provide 16 channels to MUX0. The TDA8540's have
4874  * 4 independent outputs and as such the IVC120G also has the
4875  * optional "Monitor Out" bus. This allows the card to be looking
4876  * at one input while the monitor is looking at another.
4877  *
4878  * Since I've couldn't be bothered figuring out how to add an
4879  * independant muxsel for the monitor bus, I've just set it to
4880  * whatever the card is looking at.
4881  *
4882  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4883  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4884  *
4885  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4886  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4887  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4888  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4889  *
4890  */
4891
4892 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4893 #define I2C_TDA8540        0x90
4894 #define I2C_TDA8540_ALT1   0x92
4895 #define I2C_TDA8540_ALT2   0x94
4896 #define I2C_TDA8540_ALT3   0x96
4897 #define I2C_TDA8540_ALT4   0x98
4898 #define I2C_TDA8540_ALT5   0x9a
4899 #define I2C_TDA8540_ALT6   0x9c
4900
4901 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4902 {
4903         /* Simple maths */
4904         int key = input % 4;
4905         int matrix = input / 4;
4906
4907         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4908                 btv->c.nr, input, matrix, key);
4909
4910         /* Handles the input selection on the TDA8540's */
4911         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4912                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4913         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4914                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4915         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4916                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4917         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4918                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4919
4920         /* Handles the output enables on the TDA8540's */
4921         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4922                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4923         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4924                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4925         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4926                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4927         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4928                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4929
4930         /* Selects MUX0 for input on the 878 */
4931         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4932 }
4933
4934
4935 /* PXC200 muxsel helper
4936  * luke@syseng.anu.edu.au
4937  * another transplant
4938  * from Alessandro Rubini (rubini@linux.it)
4939  *
4940  * There are 4 kinds of cards:
4941  * PXC200L which is bt848
4942  * PXC200F which is bt848 with PIC controlling mux
4943  * PXC200AL which is bt878
4944  * PXC200AF which is bt878 with PIC controlling mux
4945  */
4946 #define PX_CFG_PXC200F 0x01
4947 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4948 #define PX_I2C_PIC       0x0f
4949 #define PX_PXC200A_CARDID 0x200a1295
4950 #define PX_I2C_CMD_CFG   0x00
4951
4952 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4953 {
4954         int rc;
4955         long mux;
4956         int bitmask;
4957         unsigned char buf[2];
4958
4959         /* Read PIC config to determine if this is a PXC200F */
4960         /* PX_I2C_CMD_CFG*/
4961         buf[0]=0;
4962         buf[1]=0;
4963         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4964         if (rc) {
4965           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4966           /* not PXC ? do nothing */
4967           return;
4968         }
4969
4970         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4971         if (!(rc & PX_CFG_PXC200F)) {
4972           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4973           return;
4974         }
4975
4976
4977         /* The multiplexer in the 200F is handled by the GPIO port */
4978         /* get correct mapping between inputs  */
4979         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4980         /* ** not needed!?   */
4981         mux = input;
4982
4983         /* make sure output pins are enabled */
4984         /* bitmask=0x30f; */
4985         bitmask=0x302;
4986         /* check whether we have a PXC200A */
4987         if (btv->cardid == PX_PXC200A_CARDID)  {
4988            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4989            bitmask |= 7<<4; /* the DAC */
4990         }
4991         btwrite(bitmask, BT848_GPIO_OUT_EN);
4992
4993         bitmask = btread(BT848_GPIO_DATA);
4994         if (btv->cardid == PX_PXC200A_CARDID)
4995           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4996         else /* older device */
4997           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4998         btwrite(bitmask,BT848_GPIO_DATA);
4999
5000         /*
5001          * Was "to be safe, set the bt848 to input 0"
5002          * Actually, since it's ok at load time, better not messing
5003          * with these bits (on PXC200AF you need to set mux 2 here)
5004          *
5005          * needed because bttv-driver sets mux before calling this function
5006          */
5007         if (btv->cardid == PX_PXC200A_CARDID)
5008           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
5009         else /* older device */
5010           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
5011
5012         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
5013 }
5014
5015 /* ----------------------------------------------------------------------- */
5016 /* motherboard chipset specific stuff                                      */
5017
5018 void __devinit bttv_check_chipset(void)
5019 {
5020         int pcipci_fail = 0;
5021         struct pci_dev *dev = NULL;
5022
5023         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
5024                 pcipci_fail = 1;
5025         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
5026                 triton1 = 1;
5027         if (pci_pci_problems & PCIPCI_VSFX)
5028                 vsfx = 1;
5029 #ifdef PCIPCI_ALIMAGIK
5030         if (pci_pci_problems & PCIPCI_ALIMAGIK)
5031                 latency = 0x0A;
5032 #endif
5033
5034
5035         /* print warnings about any quirks found */
5036         if (triton1)
5037                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5038         if (vsfx)
5039                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5040         if (pcipci_fail) {
5041                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5042                                                         "together.\n");
5043                 if (!no_overlay) {
5044                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
5045                         no_overlay = 1;
5046                 } else {
5047                         printk(KERN_INFO "bttv: overlay forced. Use this "
5048                                                 "option at your own risk.\n");
5049                 }
5050         }
5051         if (UNSET != latency)
5052                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5053         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5054                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
5055                 unsigned char b;
5056                 pci_read_config_byte(dev, 0x53, &b);
5057                 if (bttv_debug)
5058                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5059                                "bufcon=0x%02x\n",b);
5060         }
5061 }
5062
5063 int __devinit bttv_handle_chipset(struct bttv *btv)
5064 {
5065         unsigned char command;
5066
5067         if (!triton1 && !vsfx && UNSET == latency)
5068                 return 0;
5069
5070         if (bttv_verbose) {
5071                 if (triton1)
5072                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5073                 if (vsfx && btv->id >= 878)
5074                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5075                 if (UNSET != latency)
5076                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5077                                btv->c.nr,latency);
5078         }
5079
5080         if (btv->id < 878) {
5081                 /* bt848 (mis)uses a bit in the irq mask for etbf */
5082                 if (triton1)
5083                         btv->triton1 = BT848_INT_ETBF;
5084         } else {
5085                 /* bt878 has a bit in the pci config space for it */
5086                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5087                 if (triton1)
5088                         command |= BT878_EN_TBFX;
5089                 if (vsfx)
5090                         command |= BT878_EN_VSFX;
5091                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5092         }
5093         if (UNSET != latency)
5094                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
5095         return 0;
5