V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist.
[linux-2.6.git] / drivers / media / video / bt8xx / bttv-cards.c
1 /*
2
3     bttv-cards.c
4
5     this file has configuration informations - card-specific stuff
6     like the big tvcards array for the most part
7
8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; either version 2 of the License, or
15     (at your option) any later version.
16
17     This program is distributed in the hope that it will be useful,
18     but WITHOUT ANY WARRANTY; without even the implied warranty of
19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20     GNU General Public License for more details.
21
22     You should have received a copy of the GNU General Public License
23     along with this program; if not, write to the Free Software
24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
36
37 #include <asm/unaligned.h>
38 #include <asm/io.h>
39
40 #include "bttvp.h"
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
44
45 /* fwd decl */
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
53
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
59
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
61
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
64
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
67
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
70
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
73
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
75
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
77
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
80
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85                                unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
87
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
92 int no_overlay=-1;
93
94 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
100 #ifdef MODULE
101 static unsigned int autoload = 1;
102 #else
103 static unsigned int autoload;
104 #endif
105 static unsigned int gpiomask = UNSET;
106 static unsigned int audioall = UNSET;
107 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
108
109 /* insmod options */
110 module_param(triton1,    int, 0444);
111 module_param(vsfx,       int, 0444);
112 module_param(no_overlay, int, 0444);
113 module_param(latency,    int, 0444);
114 module_param(gpiomask,   int, 0444);
115 module_param(audioall,   int, 0444);
116 module_param(autoload,   int, 0444);
117
118 module_param_array(card,     int, NULL, 0444);
119 module_param_array(pll,      int, NULL, 0444);
120 module_param_array(tuner,    int, NULL, 0444);
121 module_param_array(svhs,     int, NULL, 0444);
122 module_param_array(remote,   int, NULL, 0444);
123 module_param_array(audiomux, int, NULL, 0444);
124
125 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
126                  "[enable bug compatibility for triton1 + others]");
127 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
128                  "[yet another chipset flaw workaround]");
129 MODULE_PARM_DESC(latency,"pci latency timer");
130 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
131 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
132 MODULE_PARM_DESC(tuner,"specify installed tuner type");
133 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
134 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
135                 " [some VIA/SIS chipsets are known to have problem with overlay]");
136
137 /* ----------------------------------------------------------------------- */
138 /* list of card IDs for bt878+ cards                                       */
139
140 static struct CARD {
141         unsigned id;
142         int cardnr;
143         char *name;
144 } cards[] __devinitdata = {
145         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
146         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
147         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
148         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
149         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
150         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
151         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
152         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
153         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
154
155         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
156         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
157
158         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
159         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
160         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
161         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
162         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
163         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
164         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
165         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
166         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
167
168         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
169         /* some cards ship with byteswapped IDs ... */
170         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
171         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
172         /* this seems to happen as well ... */
173         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
174
175         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
176         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
177         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
178
179         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
180         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
181         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
182         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
183         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
184         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
185         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
186
187         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
188         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
189         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
190         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
191         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
192
193         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
194         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
195         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
196         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
197
198         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
199         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
200         /* clashes with FlyVideo
201          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
202         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
203         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
204         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
205         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
206
207         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
208         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
209         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
210         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
211         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
212
213         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
214         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
215         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
216         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
217         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
218
219         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
220         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
221         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
222         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
223
224         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
225         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
226         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
227         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
228
229         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
230         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
231         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
232         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
233         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
234         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
235         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
236         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
237         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
238         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
239         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
240         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
241         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
242         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
243         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
244         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
245         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
246         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
247         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
248         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
249         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
250         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
251         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
252         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
253         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
254         { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
255         { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
256         { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
257         { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
258
259         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
260         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
261
262         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
263         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
264         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
265         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
266         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
267         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
268
269         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
270         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
271
272         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
273         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
274         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
275         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
276         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
277         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
278         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
279         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
280         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
281
282         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
283         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
284
285         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
286         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
287         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
288         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
289
290         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
291
292         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
293         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
294
295         /* likely broken, vendor id doesn't match the other magic views ...
296          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
297
298         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
299         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
300
301         { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
302
303         /* DVB cards (using pci function .1 for mpeg data xfer) */
304         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
305         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
307         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
308         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
309         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
310         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
311         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
312         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
313         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
314         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
315         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
316         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
317         { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
318         { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
319         { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
320         { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
321         { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
322         { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
323         { 0, -1, NULL }
324 };
325
326 /* ----------------------------------------------------------------------- */
327 /* array with description for bt848 / bt878 tv/grabber cards               */
328
329 struct tvcard bttv_tvcards[] = {
330         /* ---- card 0x00 ---------------------------------- */
331         [BTTV_BOARD_UNKNOWN] = {
332                 .name           = " *** UNKNOWN/GENERIC *** ",
333                 .video_inputs   = 4,
334                 .svhs           = 2,
335                 .muxsel         = MUXSEL(2, 3, 1, 0),
336                 .tuner_type     = UNSET,
337                 .tuner_addr     = ADDR_UNSET,
338         },
339         [BTTV_BOARD_MIRO] = {
340                 .name           = "MIRO PCTV",
341                 .video_inputs   = 4,
342                 /* .audio_inputs= 1, */
343                 .svhs           = 2,
344                 .gpiomask       = 15,
345                 .muxsel         = MUXSEL(2, 3, 1, 1),
346                 .gpiomux        = { 2, 0, 0, 0 },
347                 .gpiomute       = 10,
348                 .needs_tvaudio  = 1,
349                 .tuner_type     = UNSET,
350                 .tuner_addr     = ADDR_UNSET,
351         },
352         [BTTV_BOARD_HAUPPAUGE] = {
353                 .name           = "Hauppauge (bt848)",
354                 .video_inputs   = 4,
355                 /* .audio_inputs= 1, */
356                 .svhs           = 2,
357                 .gpiomask       = 7,
358                 .muxsel         = MUXSEL(2, 3, 1, 1),
359                 .gpiomux        = { 0, 1, 2, 3 },
360                 .gpiomute       = 4,
361                 .needs_tvaudio  = 1,
362                 .tuner_type     = UNSET,
363                 .tuner_addr     = ADDR_UNSET,
364         },
365         [BTTV_BOARD_STB] = {
366                 .name           = "STB, Gateway P/N 6000699 (bt848)",
367                 .video_inputs   = 3,
368                 /* .audio_inputs= 1, */
369                 .svhs           = 2,
370                 .gpiomask       = 7,
371                 .muxsel         = MUXSEL(2, 3, 1, 1),
372                 .gpiomux        = { 4, 0, 2, 3 },
373                 .gpiomute       = 1,
374                 .no_msp34xx     = 1,
375                 .needs_tvaudio  = 1,
376                 .tuner_type     = TUNER_PHILIPS_NTSC,
377                 .tuner_addr     = ADDR_UNSET,
378                 .pll            = PLL_28,
379                 .has_radio      = 1,
380         },
381
382         /* ---- card 0x04 ---------------------------------- */
383         [BTTV_BOARD_INTEL] = {
384                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
385                 .video_inputs   = 4,
386                 /* .audio_inputs= 0, */
387                 .svhs           = 2,
388                 .gpiomask       = 0,
389                 .muxsel         = MUXSEL(2, 3, 1, 1),
390                 .gpiomux        = { 0 },
391                 .needs_tvaudio  = 0,
392                 .tuner_type     = TUNER_ABSENT,
393                 .tuner_addr     = ADDR_UNSET,
394         },
395         [BTTV_BOARD_DIAMOND] = {
396                 .name           = "Diamond DTV2000",
397                 .video_inputs   = 4,
398                 /* .audio_inputs= 1, */
399                 .svhs           = 2,
400                 .gpiomask       = 3,
401                 .muxsel         = MUXSEL(2, 3, 1, 0),
402                 .gpiomux        = { 0, 1, 0, 1 },
403                 .gpiomute       = 3,
404                 .needs_tvaudio  = 1,
405                 .tuner_type     = UNSET,
406                 .tuner_addr     = ADDR_UNSET,
407         },
408         [BTTV_BOARD_AVERMEDIA] = {
409                 .name           = "AVerMedia TVPhone",
410                 .video_inputs   = 3,
411                 /* .audio_inputs= 1, */
412                 .svhs           = 3,
413                 .muxsel         = MUXSEL(2, 3, 1, 1),
414                 .gpiomask       = 0x0f,
415                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
416                 /*                0x04 for some cards ?? */
417                 .needs_tvaudio  = 1,
418                 .tuner_type     = UNSET,
419                 .tuner_addr     = ADDR_UNSET,
420                 .audio_mode_gpio= avermedia_tvphone_audio,
421                 .has_remote     = 1,
422         },
423         [BTTV_BOARD_MATRIX_VISION] = {
424                 .name           = "MATRIX-Vision MV-Delta",
425                 .video_inputs   = 5,
426                 /* .audio_inputs= 1, */
427                 .svhs           = 3,
428                 .gpiomask       = 0,
429                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
430                 .gpiomux        = { 0 },
431                 .needs_tvaudio  = 1,
432                 .tuner_type     = TUNER_ABSENT,
433                 .tuner_addr     = ADDR_UNSET,
434         },
435
436         /* ---- card 0x08 ---------------------------------- */
437         [BTTV_BOARD_FLYVIDEO] = {
438                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
439                 .video_inputs   = 4,
440                 /* .audio_inputs= 1, */
441                 .svhs           = 2,
442                 .gpiomask       = 0xc00,
443                 .muxsel         = MUXSEL(2, 3, 1, 1),
444                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
445                 .gpiomute       = 0xc00,
446                 .needs_tvaudio  = 1,
447                 .pll            = PLL_28,
448                 .tuner_type     = UNSET,
449                 .tuner_addr     = ADDR_UNSET,
450         },
451         [BTTV_BOARD_TURBOTV] = {
452                 .name           = "IMS/IXmicro TurboTV",
453                 .video_inputs   = 3,
454                 /* .audio_inputs= 1, */
455                 .svhs           = 2,
456                 .gpiomask       = 3,
457                 .muxsel         = MUXSEL(2, 3, 1, 1),
458                 .gpiomux        = { 1, 1, 2, 3 },
459                 .needs_tvaudio  = 0,
460                 .pll            = PLL_28,
461                 .tuner_type     = TUNER_TEMIC_PAL,
462                 .tuner_addr     = ADDR_UNSET,
463         },
464         [BTTV_BOARD_HAUPPAUGE878] = {
465                 .name           = "Hauppauge (bt878)",
466                 .video_inputs   = 4,
467                 /* .audio_inputs= 1, */
468                 .svhs           = 2,
469                 .gpiomask       = 0x0f, /* old: 7 */
470                 .muxsel         = MUXSEL(2, 0, 1, 1),
471                 .gpiomux        = { 0, 1, 2, 3 },
472                 .gpiomute       = 4,
473                 .needs_tvaudio  = 1,
474                 .pll            = PLL_28,
475                 .tuner_type     = UNSET,
476                 .tuner_addr     = ADDR_UNSET,
477         },
478         [BTTV_BOARD_MIROPRO] = {
479                 .name           = "MIRO PCTV pro",
480                 .video_inputs   = 3,
481                 /* .audio_inputs= 1, */
482                 .svhs           = 2,
483                 .gpiomask       = 0x3014f,
484                 .muxsel         = MUXSEL(2, 3, 1, 1),
485                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
486                 .gpiomute       = 10,
487                 .needs_tvaudio  = 1,
488                 .tuner_type     = UNSET,
489                 .tuner_addr     = ADDR_UNSET,
490         },
491
492         /* ---- card 0x0c ---------------------------------- */
493         [BTTV_BOARD_ADSTECH_TV] = {
494                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
495                 .video_inputs   = 3,
496                 /* .audio_inputs= 1, */
497                 .svhs           = 2,
498                 .gpiomask       = 15,
499                 .muxsel         = MUXSEL(2, 3, 1, 1),
500                 .gpiomux        = { 13, 14, 11, 7 },
501                 .needs_tvaudio  = 1,
502                 .tuner_type     = UNSET,
503                 .tuner_addr     = ADDR_UNSET,
504         },
505         [BTTV_BOARD_AVERMEDIA98] = {
506                 .name           = "AVerMedia TVCapture 98",
507                 .video_inputs   = 3,
508                 /* .audio_inputs= 4, */
509                 .svhs           = 2,
510                 .gpiomask       = 15,
511                 .muxsel         = MUXSEL(2, 3, 1, 1),
512                 .gpiomux        = { 13, 14, 11, 7 },
513                 .needs_tvaudio  = 1,
514                 .msp34xx_alt    = 1,
515                 .pll            = PLL_28,
516                 .tuner_type     = TUNER_PHILIPS_PAL,
517                 .tuner_addr     = ADDR_UNSET,
518                 .audio_mode_gpio= avermedia_tv_stereo_audio,
519                 .no_gpioirq     = 1,
520         },
521         [BTTV_BOARD_VHX] = {
522                 .name           = "Aimslab Video Highway Xtreme (VHX)",
523                 .video_inputs   = 3,
524                 /* .audio_inputs= 1, */
525                 .svhs           = 2,
526                 .gpiomask       = 7,
527                 .muxsel         = MUXSEL(2, 3, 1, 1),
528                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
529                 .gpiomute       = 4,
530                 .needs_tvaudio  = 1,
531                 .pll            = PLL_28,
532                 .tuner_type     = UNSET,
533                 .tuner_addr     = ADDR_UNSET,
534         },
535         [BTTV_BOARD_ZOLTRIX] = {
536                 .name           = "Zoltrix TV-Max",
537                 .video_inputs   = 3,
538                 /* .audio_inputs= 1, */
539                 .svhs           = 2,
540                 .gpiomask       = 15,
541                 .muxsel         = MUXSEL(2, 3, 1, 1),
542                 .gpiomux        = { 0, 0, 1, 0 },
543                 .gpiomute       = 10,
544                 .needs_tvaudio  = 1,
545                 .tuner_type     = UNSET,
546                 .tuner_addr     = ADDR_UNSET,
547         },
548
549         /* ---- card 0x10 ---------------------------------- */
550         [BTTV_BOARD_PIXVIEWPLAYTV] = {
551                 .name           = "Prolink Pixelview PlayTV (bt878)",
552                 .video_inputs   = 3,
553                 /* .audio_inputs= 1, */
554                 .svhs           = 2,
555                 .gpiomask       = 0x01fe00,
556                 .muxsel         = MUXSEL(2, 3, 1, 1),
557                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
558                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
559                 .gpiomute       = 0x002000,
560                 .needs_tvaudio  = 1,
561                 .pll            = PLL_28,
562                 .tuner_type     = UNSET,
563                 .tuner_addr     = ADDR_UNSET,
564         },
565         [BTTV_BOARD_WINVIEW_601] = {
566                 .name           = "Leadtek WinView 601",
567                 .video_inputs   = 3,
568                 /* .audio_inputs= 1, */
569                 .svhs           = 2,
570                 .gpiomask       = 0x8300f8,
571                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
572                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
573                 .gpiomute       = 0xcfa007,
574                 .needs_tvaudio  = 1,
575                 .tuner_type     = UNSET,
576                 .tuner_addr     = ADDR_UNSET,
577                 .volume_gpio    = winview_volume,
578                 .has_radio      = 1,
579         },
580         [BTTV_BOARD_AVEC_INTERCAP] = {
581                 .name           = "AVEC Intercapture",
582                 .video_inputs   = 3,
583                 /* .audio_inputs= 2, */
584                 .svhs           = 2,
585                 .gpiomask       = 0,
586                 .muxsel         = MUXSEL(2, 3, 1, 1),
587                 .gpiomux        = { 1, 0, 0, 0 },
588                 .needs_tvaudio  = 1,
589                 .tuner_type     = UNSET,
590                 .tuner_addr     = ADDR_UNSET,
591         },
592         [BTTV_BOARD_LIFE_FLYKIT] = {
593                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
594                 .video_inputs   = 4,
595                 /* .audio_inputs= 1, */
596                 .svhs           = NO_SVHS,
597                 .gpiomask       = 0x8dff00,
598                 .muxsel         = MUXSEL(2, 3, 1, 1),
599                 .gpiomux        = { 0 },
600                 .no_msp34xx     = 1,
601                 .tuner_type     = TUNER_ABSENT,
602                 .tuner_addr     = ADDR_UNSET,
603         },
604
605         /* ---- card 0x14 ---------------------------------- */
606         [BTTV_BOARD_CEI_RAFFLES] = {
607                 .name           = "CEI Raffles Card",
608                 .video_inputs   = 3,
609                 /* .audio_inputs= 3, */
610                 .svhs           = 2,
611                 .muxsel         = MUXSEL(2, 3, 1, 1),
612                 .tuner_type     = UNSET,
613                 .tuner_addr     = ADDR_UNSET,
614         },
615         [BTTV_BOARD_CONFERENCETV] = {
616                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
617                 .video_inputs   = 4,
618                 /* .audio_inputs= 2,  tuner, line in */
619                 .svhs           = 2,
620                 .gpiomask       = 0x1800,
621                 .muxsel         = MUXSEL(2, 3, 1, 1),
622                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
623                 .gpiomute       = 0x1800,
624                 .pll            = PLL_28,
625                 .tuner_type     = TUNER_PHILIPS_PAL_I,
626                 .tuner_addr     = ADDR_UNSET,
627         },
628         [BTTV_BOARD_PHOEBE_TVMAS] = {
629                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
630                 .video_inputs   = 3,
631                 /* .audio_inputs= 1, */
632                 .svhs           = 2,
633                 .gpiomask       = 0xc00,
634                 .muxsel         = MUXSEL(2, 3, 1, 1),
635                 .gpiomux        = { 0, 1, 0x800, 0x400 },
636                 .gpiomute       = 0xc00,
637                 .needs_tvaudio  = 1,
638                 .pll            = PLL_28,
639                 .tuner_type     = UNSET,
640                 .tuner_addr     = ADDR_UNSET,
641         },
642         [BTTV_BOARD_MODTEC_205] = {
643                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
644                 .video_inputs   = 3,
645                 /* .audio_inputs= 1, */
646                 .svhs           = NO_SVHS,
647                 .has_dig_in     = 1,
648                 .gpiomask       = 7,
649                 .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
650                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
651                 .gpiomux        = { 0, 0, 0, 0 },
652                 .no_msp34xx     = 1,
653                 .pll            = PLL_28,
654                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
655                 .tuner_addr     = ADDR_UNSET,
656         },
657
658         /* ---- card 0x18 ---------------------------------- */
659         [BTTV_BOARD_MAGICTVIEW061] = {
660                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
661                 .video_inputs   = 3,
662                 /* .audio_inputs= 1, */
663                 .svhs           = 2,
664                 .gpiomask       = 0xe00,
665                 .muxsel         = MUXSEL(2, 3, 1, 1),
666                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
667                 .gpiomute       = 0xc00,
668                 .needs_tvaudio  = 1,
669                 .pll            = PLL_28,
670                 .tuner_type     = UNSET,
671                 .tuner_addr     = ADDR_UNSET,
672                 .has_remote     = 1,
673         },
674         [BTTV_BOARD_VOBIS_BOOSTAR] = {
675                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
676                 .video_inputs   = 3,
677                 /* .audio_inputs= 1, */
678                 .svhs           = 2,
679                 .gpiomask       = 0x1f0fff,
680                 .muxsel         = MUXSEL(2, 3, 1, 1),
681                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
682                 .gpiomute       = 0x40000,
683                 .needs_tvaudio  = 0,
684                 .tuner_type     = TUNER_PHILIPS_PAL,
685                 .tuner_addr     = ADDR_UNSET,
686                 .audio_mode_gpio= terratv_audio,
687         },
688         [BTTV_BOARD_HAUPPAUG_WCAM] = {
689                 .name           = "Hauppauge WinCam newer (bt878)",
690                 .video_inputs   = 4,
691                 /* .audio_inputs= 1, */
692                 .svhs           = 3,
693                 .gpiomask       = 7,
694                 .muxsel         = MUXSEL(2, 0, 1, 1),
695                 .gpiomux        = { 0, 1, 2, 3 },
696                 .gpiomute       = 4,
697                 .needs_tvaudio  = 1,
698                 .tuner_type     = UNSET,
699                 .tuner_addr     = ADDR_UNSET,
700         },
701         [BTTV_BOARD_MAXI] = {
702                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
703                 .video_inputs   = 4,
704                 /* .audio_inputs= 2, */
705                 .svhs           = 2,
706                 .gpiomask       = 0x1800,
707                 .muxsel         = MUXSEL(2, 3, 1, 1),
708                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
709                 .gpiomute       = 0x1800,
710                 .pll            = PLL_28,
711                 .tuner_type     = TUNER_PHILIPS_SECAM,
712                 .tuner_addr     = ADDR_UNSET,
713         },
714
715         /* ---- card 0x1c ---------------------------------- */
716         [BTTV_BOARD_TERRATV] = {
717                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
718                 .video_inputs   = 3,
719                 /* .audio_inputs= 1, */
720                 .svhs           = 2,
721                 .gpiomask       = 0x1f0fff,
722                 .muxsel         = MUXSEL(2, 3, 1, 1),
723                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
724                 .gpiomute       = 0x40000,
725                 .needs_tvaudio  = 0,
726                 .tuner_type     = TUNER_PHILIPS_PAL,
727                 .tuner_addr     = ADDR_UNSET,
728                 .audio_mode_gpio= terratv_audio,
729                 /* GPIO wiring:
730                 External 20 pin connector (for Active Radio Upgrade board)
731                 gpio00: i2c-sda
732                 gpio01: i2c-scl
733                 gpio02: om5610-data
734                 gpio03: om5610-clk
735                 gpio04: om5610-wre
736                 gpio05: om5610-stereo
737                 gpio06: rds6588-davn
738                 gpio07: Pin 7 n.c.
739                 gpio08: nIOW
740                 gpio09+10: nIOR, nSEL ?? (bt878)
741                         gpio09: nIOR (bt848)
742                         gpio10: nSEL (bt848)
743                 Sound Routing:
744                 gpio16: u2-A0 (1st 4052bt)
745                 gpio17: u2-A1
746                 gpio18: u2-nEN
747                 gpio19: u4-A0 (2nd 4052)
748                 gpio20: u4-A1
749                         u4-nEN - GND
750                 Btspy:
751                         00000 : Cdrom (internal audio input)
752                         10000 : ext. Video audio input
753                         20000 : TV Mono
754                         a0000 : TV Mono/2
755                 1a0000 : TV Stereo
756                         30000 : Radio
757                         40000 : Mute
758         */
759
760         },
761         [BTTV_BOARD_PXC200] = {
762                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
763                 .name           = "Imagenation PXC200",
764                 .video_inputs   = 5,
765                 /* .audio_inputs= 1, */
766                 .svhs           = 1, /* was: 4 */
767                 .gpiomask       = 0,
768                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
769                 .gpiomux        = { 0 },
770                 .needs_tvaudio  = 1,
771                 .tuner_type     = TUNER_ABSENT,
772                 .tuner_addr     = ADDR_UNSET,
773                 .muxsel_hook    = PXC200_muxsel,
774
775         },
776         [BTTV_BOARD_FLYVIDEO_98] = {
777                 .name           = "Lifeview FlyVideo 98 LR50",
778                 .video_inputs   = 4,
779                 /* .audio_inputs= 1, */
780                 .svhs           = 2,
781                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
782                 .muxsel         = MUXSEL(2, 3, 1, 1),
783                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
784                 .gpiomute       = 0x1800,
785                 .pll            = PLL_28,
786                 .tuner_type     = UNSET,
787                 .tuner_addr     = ADDR_UNSET,
788         },
789         [BTTV_BOARD_IPROTV] = {
790                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
791                 .video_inputs   = 4,
792                 /* .audio_inputs= 1, */
793                 .svhs           = 3,
794                 .gpiomask       = 1,
795                 .muxsel         = MUXSEL(2, 3, 1, 1),
796                 .gpiomux        = { 1, 0, 0, 0 },
797                 .pll            = PLL_28,
798                 .tuner_type     = TUNER_PHILIPS_PAL,
799                 .tuner_addr     = ADDR_UNSET,
800         },
801
802         /* ---- card 0x20 ---------------------------------- */
803         [BTTV_BOARD_INTEL_C_S_PCI] = {
804                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
805                 .video_inputs   = 4,
806                 /* .audio_inputs= 0, */
807                 .svhs           = 2,
808                 .gpiomask       = 0,
809                 .muxsel         = MUXSEL(2, 3, 1, 1),
810                 .gpiomux        = { 0 },
811                 .needs_tvaudio  = 0,
812                 .tuner_type     = TUNER_ABSENT,
813                 .tuner_addr     = ADDR_UNSET,
814         },
815         [BTTV_BOARD_TERRATVALUE] = {
816                 .name           = "Terratec TerraTValue Version Bt878",
817                 .video_inputs   = 3,
818                 /* .audio_inputs= 1, */
819                 .svhs           = 2,
820                 .gpiomask       = 0xffff00,
821                 .muxsel         = MUXSEL(2, 3, 1, 1),
822                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
823                 .gpiomute       = 0x900,
824                 .needs_tvaudio  = 1,
825                 .pll            = PLL_28,
826                 .tuner_type     = TUNER_PHILIPS_PAL,
827                 .tuner_addr     = ADDR_UNSET,
828         },
829         [BTTV_BOARD_WINFAST2000] = {
830                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
831                 .video_inputs   = 4,
832                 /* .audio_inputs= 1, */
833                 .svhs           = 2,
834                 /* TV, CVid, SVid, CVid over SVid connector */
835                 .muxsel         = MUXSEL(2, 3, 1, 1, 0),
836                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
837                 .gpiomask       = 0xb33000,
838                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
839                 .gpiomute       = 0x800000,
840                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
841                         gpio23 -- hef4052:nEnable (0x800000)
842                         gpio12 -- hef4052:A1
843                         gpio13 -- hef4052:A0
844                 0x0000: external audio
845                 0x1000: FM
846                 0x2000: TV
847                 0x3000: n.c.
848                 Note: There exists another variant "Winfast 2000" with tv stereo !?
849                 Note: eeprom only contains FF and pci subsystem id 107d:6606
850                 */
851                 .needs_tvaudio  = 0,
852                 .pll            = PLL_28,
853                 .has_radio      = 1,
854                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
855                 .tuner_addr     = ADDR_UNSET,
856                 .audio_mode_gpio= winfast2000_audio,
857                 .has_remote     = 1,
858         },
859         [BTTV_BOARD_CHRONOS_VS2] = {
860                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
861                 .video_inputs   = 4,
862                 /* .audio_inputs= 3, */
863                 .svhs           = 2,
864                 .gpiomask       = 0x1800,
865                 .muxsel         = MUXSEL(2, 3, 1, 1),
866                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
867                 .gpiomute       = 0x1800,
868                 .pll            = PLL_28,
869                 .tuner_type     = UNSET,
870                 .tuner_addr     = ADDR_UNSET,
871         },
872
873         /* ---- card 0x24 ---------------------------------- */
874         [BTTV_BOARD_TYPHOON_TVIEW] = {
875                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
876                 .video_inputs   = 4,
877                 /* .audio_inputs= 3, */
878                 .svhs           = 2,
879                 .gpiomask       = 0x1800,
880                 .muxsel         = MUXSEL(2, 3, 1, 1),
881                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
882                 .gpiomute       = 0x1800,
883                 .pll            = PLL_28,
884                 .tuner_type     = UNSET,
885                 .tuner_addr     = ADDR_UNSET,
886                 .has_radio      = 1,
887         },
888         [BTTV_BOARD_PXELVWPLTVPRO] = {
889                 .name           = "Prolink PixelView PlayTV pro",
890                 .video_inputs   = 3,
891                 /* .audio_inputs= 1, */
892                 .svhs           = 2,
893                 .gpiomask       = 0xff,
894                 .muxsel         = MUXSEL(2, 3, 1, 1),
895                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
896                 .gpiomute       = 0x29,
897                 .no_msp34xx     = 1,
898                 .pll            = PLL_28,
899                 .tuner_type     = UNSET,
900                 .tuner_addr     = ADDR_UNSET,
901         },
902         [BTTV_BOARD_MAGICTVIEW063] = {
903                 .name           = "Askey CPH06X TView99",
904                 .video_inputs   = 4,
905                 /* .audio_inputs= 1, */
906                 .svhs           = 2,
907                 .gpiomask       = 0x551e00,
908                 .muxsel         = MUXSEL(2, 3, 1, 0),
909                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
910                 .gpiomute       = 0x551c00,
911                 .needs_tvaudio  = 1,
912                 .pll            = PLL_28,
913                 .tuner_type     = TUNER_PHILIPS_PAL_I,
914                 .tuner_addr     = ADDR_UNSET,
915                 .has_remote     = 1,
916         },
917         [BTTV_BOARD_PINNACLE] = {
918                 .name           = "Pinnacle PCTV Studio/Rave",
919                 .video_inputs   = 3,
920                 /* .audio_inputs= 1, */
921                 .svhs           = 2,
922                 .gpiomask       = 0x03000F,
923                 .muxsel         = MUXSEL(2, 3, 1, 1),
924                 .gpiomux        = { 2, 0xd0001, 0, 0 },
925                 .gpiomute       = 1,
926                 .needs_tvaudio  = 0,
927                 .pll            = PLL_28,
928                 .tuner_type     = UNSET,
929                 .tuner_addr     = ADDR_UNSET,
930         },
931
932         /* ---- card 0x28 ---------------------------------- */
933         [BTTV_BOARD_STB2] = {
934                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
935                 .video_inputs   = 3,
936                 /* .audio_inputs= 1, */
937                 .svhs           = 2,
938                 .gpiomask       = 7,
939                 .muxsel         = MUXSEL(2, 3, 1, 1),
940                 .gpiomux        = { 4, 0, 2, 3 },
941                 .gpiomute       = 1,
942                 .no_msp34xx     = 1,
943                 .needs_tvaudio  = 1,
944                 .tuner_type     = TUNER_PHILIPS_NTSC,
945                 .tuner_addr     = ADDR_UNSET,
946                 .pll            = PLL_28,
947                 .has_radio      = 1,
948         },
949         [BTTV_BOARD_AVPHONE98] = {
950                 .name           = "AVerMedia TVPhone 98",
951                 .video_inputs   = 3,
952                 /* .audio_inputs= 4, */
953                 .svhs           = 2,
954                 .gpiomask       = 15,
955                 .muxsel         = MUXSEL(2, 3, 1, 1),
956                 .gpiomux        = { 13, 4, 11, 7 },
957                 .needs_tvaudio  = 1,
958                 .pll            = PLL_28,
959                 .tuner_type     = UNSET,
960                 .tuner_addr     = ADDR_UNSET,
961                 .has_radio      = 1,
962                 .audio_mode_gpio= avermedia_tvphone_audio,
963         },
964         [BTTV_BOARD_PV951] = {
965                 .name           = "ProVideo PV951", /* pic16c54 */
966                 .video_inputs   = 3,
967                 /* .audio_inputs= 1, */
968                 .svhs           = 2,
969                 .gpiomask       = 0,
970                 .muxsel         = MUXSEL(2, 3, 1, 1),
971                 .gpiomux        = { 0, 0, 0, 0},
972                 .needs_tvaudio  = 1,
973                 .no_msp34xx     = 1,
974                 .pll            = PLL_28,
975                 .tuner_type     = TUNER_PHILIPS_PAL_I,
976                 .tuner_addr     = ADDR_UNSET,
977         },
978         [BTTV_BOARD_ONAIR_TV] = {
979                 .name           = "Little OnAir TV",
980                 .video_inputs   = 3,
981                 /* .audio_inputs= 1, */
982                 .svhs           = 2,
983                 .gpiomask       = 0xe00b,
984                 .muxsel         = MUXSEL(2, 3, 1, 1),
985                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
986                 .gpiomute       = 0xff3ffc,
987                 .no_msp34xx     = 1,
988                 .tuner_type     = UNSET,
989                 .tuner_addr     = ADDR_UNSET,
990         },
991
992         /* ---- card 0x2c ---------------------------------- */
993         [BTTV_BOARD_SIGMA_TVII_FM] = {
994                 .name           = "Sigma TVII-FM",
995                 .video_inputs   = 2,
996                 /* .audio_inputs= 1, */
997                 .svhs           = NO_SVHS,
998                 .gpiomask       = 3,
999                 .muxsel         = MUXSEL(2, 3, 1, 1),
1000                 .gpiomux        = { 1, 1, 0, 2 },
1001                 .gpiomute       = 3,
1002                 .no_msp34xx     = 1,
1003                 .pll            = PLL_NONE,
1004                 .tuner_type     = UNSET,
1005                 .tuner_addr     = ADDR_UNSET,
1006         },
1007         [BTTV_BOARD_MATRIX_VISION2] = {
1008                 .name           = "MATRIX-Vision MV-Delta 2",
1009                 .video_inputs   = 5,
1010                 /* .audio_inputs= 1, */
1011                 .svhs           = 3,
1012                 .gpiomask       = 0,
1013                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1014                 .gpiomux        = { 0 },
1015                 .no_msp34xx     = 1,
1016                 .pll            = PLL_28,
1017                 .tuner_type     = TUNER_ABSENT,
1018                 .tuner_addr     = ADDR_UNSET,
1019         },
1020         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1021                 .name           = "Zoltrix Genie TV/FM",
1022                 .video_inputs   = 3,
1023                 /* .audio_inputs= 1, */
1024                 .svhs           = 2,
1025                 .gpiomask       = 0xbcf03f,
1026                 .muxsel         = MUXSEL(2, 3, 1, 1),
1027                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1028                 .gpiomute       = 0xbcb03f,
1029                 .no_msp34xx     = 1,
1030                 .pll            = PLL_28,
1031                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1032                 .tuner_addr     = ADDR_UNSET,
1033         },
1034         [BTTV_BOARD_TERRATVRADIO] = {
1035                 .name           = "Terratec TV/Radio+",
1036                 .video_inputs   = 3,
1037                 /* .audio_inputs= 1, */
1038                 .svhs           = 2,
1039                 .gpiomask       = 0x70000,
1040                 .muxsel         = MUXSEL(2, 3, 1, 1),
1041                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1042                 .gpiomute       = 0x40000,
1043                 .needs_tvaudio  = 1,
1044                 .no_msp34xx     = 1,
1045                 .pll            = PLL_35,
1046                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1047                 .tuner_addr     = ADDR_UNSET,
1048                 .has_radio      = 1,
1049         },
1050
1051         /* ---- card 0x30 ---------------------------------- */
1052         [BTTV_BOARD_DYNALINK] = {
1053                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1054                 .video_inputs   = 3,
1055                 /* .audio_inputs= 1, */
1056                 .svhs           = 2,
1057                 .gpiomask       = 15,
1058                 .muxsel         = MUXSEL(2, 3, 1, 1),
1059                 .gpiomux        = {2,0,0,0 },
1060                 .gpiomute       = 1,
1061                 .needs_tvaudio  = 1,
1062                 .pll            = PLL_28,
1063                 .tuner_type     = UNSET,
1064                 .tuner_addr     = ADDR_UNSET,
1065         },
1066         [BTTV_BOARD_GVBCTV3PCI] = {
1067                 .name           = "IODATA GV-BCTV3/PCI",
1068                 .video_inputs   = 3,
1069                 /* .audio_inputs= 1, */
1070                 .svhs           = 2,
1071                 .gpiomask       = 0x010f00,
1072                 .muxsel         = MUXSEL(2, 3, 0, 0),
1073                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1074                 .no_msp34xx     = 1,
1075                 .pll            = PLL_28,
1076                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1077                 .tuner_addr     = ADDR_UNSET,
1078                 .audio_mode_gpio= gvbctv3pci_audio,
1079         },
1080         [BTTV_BOARD_PXELVWPLTVPAK] = {
1081                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1082                 .video_inputs   = 5,
1083                 /* .audio_inputs= 1, */
1084                 .svhs           = 3,
1085                 .has_dig_in     = 1,
1086                 .gpiomask       = 0xAA0000,
1087                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1088                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1089                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1090                 .gpiomute       = 0xa8000,
1091                 .no_msp34xx     = 1,
1092                 .pll            = PLL_28,
1093                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1094                 .tuner_addr     = ADDR_UNSET,
1095                 .has_remote     = 1,
1096                 /* GPIO wiring: (different from Rev.4C !)
1097                         GPIO17: U4.A0 (first hef4052bt)
1098                         GPIO19: U4.A1
1099                         GPIO20: U5.A1 (second hef4052bt)
1100                         GPIO21: U4.nEN
1101                         GPIO22: BT832 Reset Line
1102                         GPIO23: A5,A0, U5,nEN
1103                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1104                 */
1105         },
1106         [BTTV_BOARD_EAGLE] = {
1107                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1108                 .video_inputs   = 4,
1109                 /* .audio_inputs= 1, */
1110                 .svhs           = 2,
1111                 .gpiomask       = 7,
1112                 .muxsel         = MUXSEL(2, 0, 1, 1),
1113                 .gpiomux        = { 0, 1, 2, 3 },
1114                 .gpiomute       = 4,
1115                 .pll            = PLL_28,
1116                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1117                 .tuner_addr     = ADDR_UNSET,
1118         },
1119
1120         /* ---- card 0x34 ---------------------------------- */
1121         [BTTV_BOARD_PINNACLEPRO] = {
1122                 /* David Härdeman <david@2gen.com> */
1123                 .name           = "Pinnacle PCTV Studio Pro",
1124                 .video_inputs   = 4,
1125                 /* .audio_inputs= 1, */
1126                 .svhs           = 3,
1127                 .gpiomask       = 0x03000F,
1128                 .muxsel         = MUXSEL(2, 3, 1, 1),
1129                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1130                 .gpiomute       = 10,
1131                                 /* sound path (5 sources):
1132                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1133                                         0= ext. Audio IN
1134                                         1= from MUX2
1135                                         2= Mono TV sound from Tuner
1136                                         3= not connected
1137                                 MUX2 (mask 0x30000):
1138                                         0,2,3= from MSP34xx
1139                                         1= FM stereo Radio from Tuner */
1140                 .needs_tvaudio  = 0,
1141                 .pll            = PLL_28,
1142                 .tuner_type     = UNSET,
1143                 .tuner_addr     = ADDR_UNSET,
1144         },
1145         [BTTV_BOARD_TVIEW_RDS_FM] = {
1146                 /* Claas Langbehn <claas@bigfoot.com>,
1147                 Sven Grothklags <sven@upb.de> */
1148                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1149                 .video_inputs   = 4,
1150                 /* .audio_inputs= 3, */
1151                 .svhs           = 2,
1152                 .gpiomask       = 0x1c,
1153                 .muxsel         = MUXSEL(2, 3, 1, 1),
1154                 .gpiomux        = { 0, 0, 0x10, 8 },
1155                 .gpiomute       = 4,
1156                 .needs_tvaudio  = 1,
1157                 .pll            = PLL_28,
1158                 .tuner_type     = TUNER_PHILIPS_PAL,
1159                 .tuner_addr     = ADDR_UNSET,
1160                 .has_radio      = 1,
1161         },
1162         [BTTV_BOARD_LIFETEC_9415] = {
1163                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1164                 in de.comp.os.unix.linux.hardware:
1165                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1166                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1167                         options tuner type=5 */
1168                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1169                 .video_inputs   = 4,
1170                 /* .audio_inputs= 1, */
1171                 .svhs           = 2,
1172                 .gpiomask       = 0x18e0,
1173                 .muxsel         = MUXSEL(2, 3, 1, 1),
1174                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1175                 .gpiomute       = 0x18e0,
1176                         /* For cards with tda9820/tda9821:
1177                                 0x0000: Tuner normal stereo
1178                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1179                                 0x0880: Tuner A2 stereo */
1180                 .pll            = PLL_28,
1181                 .tuner_type     = UNSET,
1182                 .tuner_addr     = ADDR_UNSET,
1183         },
1184         [BTTV_BOARD_BESTBUY_EASYTV] = {
1185                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1186                 old Easy TV BT848 version (model CPH031) */
1187                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1188                 .video_inputs   = 4,
1189                 /* .audio_inputs= 1, */
1190                 .svhs           = 2,
1191                 .gpiomask       = 0xF,
1192                 .muxsel         = MUXSEL(2, 3, 1, 0),
1193                 .gpiomux        = { 2, 0, 0, 0 },
1194                 .gpiomute       = 10,
1195                 .needs_tvaudio  = 0,
1196                 .pll            = PLL_28,
1197                 .tuner_type     = TUNER_TEMIC_PAL,
1198                 .tuner_addr     = ADDR_UNSET,
1199         },
1200
1201         /* ---- card 0x38 ---------------------------------- */
1202         [BTTV_BOARD_FLYVIDEO_98FM] = {
1203                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1204                 .name           = "Lifeview FlyVideo 98FM LR50",
1205                 .video_inputs   = 4,
1206                 /* .audio_inputs= 3, */
1207                 .svhs           = 2,
1208                 .gpiomask       = 0x1800,
1209                 .muxsel         = MUXSEL(2, 3, 1, 1),
1210                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1211                 .gpiomute       = 0x1800,
1212                 .pll            = PLL_28,
1213                 .tuner_type     = TUNER_PHILIPS_PAL,
1214                 .tuner_addr     = ADDR_UNSET,
1215         },
1216                 /* This is the ultimate cheapo capture card
1217                 * just a BT848A on a small PCB!
1218                 * Steve Hosgood <steve@equiinet.com> */
1219         [BTTV_BOARD_GRANDTEC] = {
1220                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1221                 .video_inputs   = 2,
1222                 /* .audio_inputs= 0, */
1223                 .svhs           = 1,
1224                 .gpiomask       = 0,
1225                 .muxsel         = MUXSEL(3, 1),
1226                 .gpiomux        = { 0 },
1227                 .needs_tvaudio  = 0,
1228                 .no_msp34xx     = 1,
1229                 .pll            = PLL_35,
1230                 .tuner_type     = TUNER_ABSENT,
1231                 .tuner_addr     = ADDR_UNSET,
1232         },
1233         [BTTV_BOARD_ASKEY_CPH060] = {
1234                 /* Daniel Herrington <daniel.herrington@home.com> */
1235                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1236                 .video_inputs   = 3,
1237                 /* .audio_inputs= 1, */
1238                 .svhs           = 2,
1239                 .gpiomask       = 0xe00,
1240                 .muxsel         = MUXSEL(2, 3, 1, 1),
1241                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1242                 .gpiomute       = 0x800,
1243                 .needs_tvaudio  = 1,
1244                 .pll            = PLL_28,
1245                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1246                 .tuner_addr     = ADDR_UNSET,
1247         },
1248         [BTTV_BOARD_ASKEY_CPH03X] = {
1249                 /* Matti Mottus <mottus@physic.ut.ee> */
1250                 .name           = "Askey CPH03x TV Capturer",
1251                 .video_inputs   = 4,
1252                 /* .audio_inputs= 1, */
1253                 .svhs           = 2,
1254                 .gpiomask       = 0x03000F,
1255                 .muxsel         = MUXSEL(2, 3, 1, 0),
1256                 .gpiomux        = { 2, 0, 0, 0 },
1257                 .gpiomute       = 1,
1258                 .pll            = PLL_28,
1259                 .tuner_type     = TUNER_TEMIC_PAL,
1260                 .tuner_addr     = ADDR_UNSET,
1261         },
1262
1263         /* ---- card 0x3c ---------------------------------- */
1264         [BTTV_BOARD_MM100PCTV] = {
1265                 /* Philip Blundell <philb@gnu.org> */
1266                 .name           = "Modular Technology MM100PCTV",
1267                 .video_inputs   = 2,
1268                 /* .audio_inputs= 2, */
1269                 .svhs           = NO_SVHS,
1270                 .gpiomask       = 11,
1271                 .muxsel         = MUXSEL(2, 3, 1, 1),
1272                 .gpiomux        = { 2, 0, 0, 1 },
1273                 .gpiomute       = 8,
1274                 .pll            = PLL_35,
1275                 .tuner_type     = TUNER_TEMIC_PAL,
1276                 .tuner_addr     = ADDR_UNSET,
1277         },
1278         [BTTV_BOARD_GMV1] = {
1279                 /* Adrian Cox <adrian@humboldt.co.uk */
1280                 .name           = "AG Electronics GMV1",
1281                 .video_inputs   = 2,
1282                 /* .audio_inputs= 0, */
1283                 .svhs           = 1,
1284                 .gpiomask       = 0xF,
1285                 .muxsel         = MUXSEL(2, 2),
1286                 .gpiomux        = { },
1287                 .no_msp34xx     = 1,
1288                 .needs_tvaudio  = 0,
1289                 .pll            = PLL_28,
1290                 .tuner_type     = TUNER_ABSENT,
1291                 .tuner_addr     = ADDR_UNSET,
1292         },
1293         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1294                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1295                 new Easy TV BT878 version (model CPH061)
1296                 special thanks to Informatica Mieres for providing the card */
1297                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1298                 .video_inputs   = 3,
1299                 /* .audio_inputs= 2, */
1300                 .svhs           = 2,
1301                 .gpiomask       = 0xFF,
1302                 .muxsel         = MUXSEL(2, 3, 1, 0),
1303                 .gpiomux        = { 1, 0, 4, 4 },
1304                 .gpiomute       = 9,
1305                 .needs_tvaudio  = 0,
1306                 .pll            = PLL_28,
1307                 .tuner_type     = TUNER_PHILIPS_PAL,
1308                 .tuner_addr     = ADDR_UNSET,
1309         },
1310         [BTTV_BOARD_ATI_TVWONDER] = {
1311                 /* Lukas Gebauer <geby@volny.cz> */
1312                 .name           = "ATI TV-Wonder",
1313                 .video_inputs   = 3,
1314                 /* .audio_inputs= 1, */
1315                 .svhs           = 2,
1316                 .gpiomask       = 0xf03f,
1317                 .muxsel         = MUXSEL(2, 3, 1, 0),
1318                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1319                 .gpiomute       = 0xbffe,
1320                 .pll            = PLL_28,
1321                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1322                 .tuner_addr     = ADDR_UNSET,
1323         },
1324
1325         /* ---- card 0x40 ---------------------------------- */
1326         [BTTV_BOARD_ATI_TVWONDERVE] = {
1327                 /* Lukas Gebauer <geby@volny.cz> */
1328                 .name           = "ATI TV-Wonder VE",
1329                 .video_inputs   = 2,
1330                 /* .audio_inputs= 1, */
1331                 .svhs           = NO_SVHS,
1332                 .gpiomask       = 1,
1333                 .muxsel         = MUXSEL(2, 3, 0, 1),
1334                 .gpiomux        = { 0, 0, 1, 0 },
1335                 .no_msp34xx     = 1,
1336                 .pll            = PLL_28,
1337                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1338                 .tuner_addr     = ADDR_UNSET,
1339         },
1340         [BTTV_BOARD_FLYVIDEO2000] = {
1341                 /* DeeJay <deejay@westel900.net (2000S) */
1342                 .name           = "Lifeview FlyVideo 2000S LR90",
1343                 .video_inputs   = 3,
1344                 /* .audio_inputs= 3, */
1345                 .svhs           = 2,
1346                 .gpiomask       = 0x18e0,
1347                 .muxsel         = MUXSEL(2, 3, 0, 1),
1348                                 /* Radio changed from 1e80 to 0x800 to make
1349                                 FlyVideo2000S in .hu happy (gm)*/
1350                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1351                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1352                 .gpiomute       = 0x1800,
1353                 .audio_mode_gpio= fv2000s_audio,
1354                 .no_msp34xx     = 1,
1355                 .no_tda9875     = 1,
1356                 .needs_tvaudio  = 1,
1357                 .pll            = PLL_28,
1358                 .tuner_type     = TUNER_PHILIPS_PAL,
1359                 .tuner_addr     = ADDR_UNSET,
1360         },
1361         [BTTV_BOARD_TERRATVALUER] = {
1362                 .name           = "Terratec TValueRadio",
1363                 .video_inputs   = 3,
1364                 /* .audio_inputs= 1, */
1365                 .svhs           = 2,
1366                 .gpiomask       = 0xffff00,
1367                 .muxsel         = MUXSEL(2, 3, 1, 1),
1368                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1369                 .gpiomute       = 0x900,
1370                 .needs_tvaudio  = 1,
1371                 .pll            = PLL_28,
1372                 .tuner_type     = TUNER_PHILIPS_PAL,
1373                 .tuner_addr     = ADDR_UNSET,
1374                 .has_radio      = 1,
1375         },
1376         [BTTV_BOARD_GVBCTV4PCI] = {
1377                 /* TANAKA Kei <peg00625@nifty.com> */
1378                 .name           = "IODATA GV-BCTV4/PCI",
1379                 .video_inputs   = 3,
1380                 /* .audio_inputs= 1, */
1381                 .svhs           = 2,
1382                 .gpiomask       = 0x010f00,
1383                 .muxsel         = MUXSEL(2, 3, 0, 0),
1384                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1385                 .no_msp34xx     = 1,
1386                 .pll            = PLL_28,
1387                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1388                 .tuner_addr     = ADDR_UNSET,
1389                 .audio_mode_gpio= gvbctv3pci_audio,
1390         },
1391
1392         /* ---- card 0x44 ---------------------------------- */
1393         [BTTV_BOARD_VOODOOTV_FM] = {
1394                 .name           = "3Dfx VoodooTV FM (Euro)",
1395                 /* try "insmod msp3400 simple=0" if you have
1396                 * sound problems with this card. */
1397                 .video_inputs   = 4,
1398                 /* .audio_inputs= 1, */
1399                 .svhs           = NO_SVHS,
1400                 .gpiomask       = 0x4f8a00,
1401                 /* 0x100000: 1=MSP enabled (0=disable again)
1402                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1403                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1404                 .gpiomute       = 0x947fff,
1405                 /* tvtuner, radio,   external,internal, mute,  stereo
1406                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1407                 .muxsel         = MUXSEL(2, 3, 0, 1),
1408                 .tuner_type     = TUNER_MT2032,
1409                 .tuner_addr     = ADDR_UNSET,
1410                 .pll            = PLL_28,
1411                 .has_radio      = 1,
1412         },
1413         [BTTV_BOARD_VOODOOTV_200] = {
1414                 .name           = "VoodooTV 200 (USA)",
1415                 /* try "insmod msp3400 simple=0" if you have
1416                 * sound problems with this card. */
1417                 .video_inputs   = 4,
1418                 /* .audio_inputs= 1, */
1419                 .svhs           = NO_SVHS,
1420                 .gpiomask       = 0x4f8a00,
1421                 /* 0x100000: 1=MSP enabled (0=disable again)
1422                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1423                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1424                 .gpiomute       = 0x947fff,
1425                 /* tvtuner, radio,   external,internal, mute,  stereo
1426                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1427                 .muxsel         = MUXSEL(2, 3, 0, 1),
1428                 .tuner_type     = TUNER_MT2032,
1429                 .tuner_addr     = ADDR_UNSET,
1430                 .pll            = PLL_28,
1431                 .has_radio      = 1,
1432         },
1433         [BTTV_BOARD_AIMMS] = {
1434                 /* Philip Blundell <pb@nexus.co.uk> */
1435                 .name           = "Active Imaging AIMMS",
1436                 .video_inputs   = 1,
1437                 /* .audio_inputs= 0, */
1438                 .tuner_type     = TUNER_ABSENT,
1439                 .tuner_addr     = ADDR_UNSET,
1440                 .pll            = PLL_28,
1441                 .muxsel         = MUXSEL(2),
1442                 .gpiomask       = 0
1443         },
1444         [BTTV_BOARD_PV_BT878P_PLUS] = {
1445                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1446                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1447                 .video_inputs   = 3,
1448                 /* .audio_inputs= 4, */
1449                 .svhs           = 2,
1450                 .gpiomask       = 15,
1451                 .muxsel         = MUXSEL(2, 3, 1, 1),
1452                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1453                 .gpiomute       = 13,
1454                 .needs_tvaudio  = 1,
1455                 .pll            = PLL_28,
1456                 .tuner_type     = TUNER_LG_PAL_I_FM,
1457                 .tuner_addr     = ADDR_UNSET,
1458                 .has_remote     = 1,
1459                 /* GPIO wiring:
1460                         GPIO0: U4.A0 (hef4052bt)
1461                         GPIO1: U4.A1
1462                         GPIO2: U4.A1 (second hef4052bt)
1463                         GPIO3: U4.nEN, U5.A0, A5.nEN
1464                         GPIO8-15: vrd866b ?
1465                 */
1466         },
1467         [BTTV_BOARD_FLYVIDEO98EZ] = {
1468                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1469                 .video_inputs   = 4,
1470                 /* .audio_inputs= 0, */
1471                 .svhs           = 2,
1472                 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1473                 .muxsel         = MUXSEL(2, 3, 1, 1),
1474                 .pll            = PLL_28,
1475                 .no_msp34xx     = 1,
1476                 .tuner_type     = TUNER_ABSENT,
1477                 .tuner_addr     = ADDR_UNSET,
1478         },
1479
1480         /* ---- card 0x48 ---------------------------------- */
1481         [BTTV_BOARD_PV_BT878P_9B] = {
1482                 /* Dariusz Kowalewski <darekk@automex.pl> */
1483                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1484                 .video_inputs   = 4,
1485                 /* .audio_inputs= 1, */
1486                 .svhs           = 2,
1487                 .gpiomask       = 0x3f,
1488                 .muxsel         = MUXSEL(2, 3, 1, 1),
1489                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1490                 .gpiomute       = 0x09,
1491                 .needs_tvaudio  = 1,
1492                 .no_msp34xx     = 1,
1493                 .no_tda9875     = 1,
1494                 .pll            = PLL_28,
1495                 .tuner_type     = TUNER_PHILIPS_PAL,
1496                 .tuner_addr     = ADDR_UNSET,
1497                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1498                 .has_radio      = 1,  /* Note: not all cards have radio */
1499                 .has_remote     = 1,
1500                 /* GPIO wiring:
1501                         GPIO0: A0 hef4052
1502                         GPIO1: A1 hef4052
1503                         GPIO3: nEN hef4052
1504                         GPIO8-15: vrd866b
1505                         GPIO20,22,23: R30,R29,R28
1506                 */
1507         },
1508         [BTTV_BOARD_SENSORAY311] = {
1509                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1510                 /* you must jumper JP5 for the card to work */
1511                 .name           = "Sensoray 311",
1512                 .video_inputs   = 5,
1513                 /* .audio_inputs= 0, */
1514                 .svhs           = 4,
1515                 .gpiomask       = 0,
1516                 .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1517                 .gpiomux        = { 0 },
1518                 .needs_tvaudio  = 0,
1519                 .tuner_type     = TUNER_ABSENT,
1520                 .tuner_addr     = ADDR_UNSET,
1521         },
1522         [BTTV_BOARD_RV605] = {
1523                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1524                 .name           = "RemoteVision MX (RV605)",
1525                 .video_inputs   = 16,
1526                 /* .audio_inputs= 0, */
1527                 .svhs           = NO_SVHS,
1528                 .gpiomask       = 0x00,
1529                 .gpiomask2      = 0x07ff,
1530                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1531                 .no_msp34xx     = 1,
1532                 .no_tda9875     = 1,
1533                 .tuner_type     = TUNER_ABSENT,
1534                 .tuner_addr     = ADDR_UNSET,
1535                 .muxsel_hook    = rv605_muxsel,
1536         },
1537         [BTTV_BOARD_POWERCLR_MTV878] = {
1538                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1539                 .video_inputs   = 3,
1540                 /* .audio_inputs= 2, */
1541                 .svhs           = 2,
1542                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1543                 .muxsel         = MUXSEL(2, 1, 1),
1544                 .gpiomux        = { 0, 1, 2, 2 },
1545                 .gpiomute       = 4,
1546                 .needs_tvaudio  = 0,
1547                 .tuner_type     = TUNER_PHILIPS_PAL,
1548                 .tuner_addr     = ADDR_UNSET,
1549                 .pll            = PLL_28,
1550                 .has_radio      = 1,
1551         },
1552
1553         /* ---- card 0x4c ---------------------------------- */
1554         [BTTV_BOARD_WINDVR] = {
1555                 /* Masaki Suzuki <masaki@btree.org> */
1556                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1557                 .video_inputs   = 3,
1558                 /* .audio_inputs= 1, */
1559                 .svhs           = 2,
1560                 .gpiomask       = 0x140007,
1561                 .muxsel         = MUXSEL(2, 3, 1, 1),
1562                 .gpiomux        = { 0, 1, 2, 3 },
1563                 .gpiomute       = 4,
1564                 .tuner_type     = TUNER_PHILIPS_NTSC,
1565                 .tuner_addr     = ADDR_UNSET,
1566                 .audio_mode_gpio= windvr_audio,
1567         },
1568         [BTTV_BOARD_GRANDTEC_MULTI] = {
1569                 .name           = "GrandTec Multi Capture Card (Bt878)",
1570                 .video_inputs   = 4,
1571                 /* .audio_inputs= 0, */
1572                 .svhs           = NO_SVHS,
1573                 .gpiomask       = 0,
1574                 .muxsel         = MUXSEL(2, 3, 1, 0),
1575                 .gpiomux        = { 0 },
1576                 .needs_tvaudio  = 0,
1577                 .no_msp34xx     = 1,
1578                 .pll            = PLL_28,
1579                 .tuner_type     = TUNER_ABSENT,
1580                 .tuner_addr     = ADDR_UNSET,
1581         },
1582         [BTTV_BOARD_KWORLD] = {
1583                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1584                 .video_inputs   = 4,
1585                 /* .audio_inputs= 3, */
1586                 .svhs           = 2,
1587                 .gpiomask       = 7,
1588                 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1589                 .muxsel         = MUXSEL(2, 3, 1, 1),
1590                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1591                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1592                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1593                                                 * This card lacks PCI subsystem ID, sigh.
1594                                                 * gpiomux =1: lower volume, 2+3: mute
1595                                                 * btwincap uses 0x80000/0x80003
1596                                                 */
1597                 .gpiomute       = 4,
1598                 .needs_tvaudio  = 0,
1599                 .no_msp34xx     = 1,
1600                 .pll            = PLL_28,
1601                 .tuner_type     = TUNER_PHILIPS_PAL,
1602                 .tuner_addr     = ADDR_UNSET,
1603                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1604                 radio signal strength indicators work fine. */
1605                 .has_radio      = 1,
1606                 /* GPIO Info:
1607                         GPIO0,1:   HEF4052 A0,A1
1608                         GPIO2:     HEF4052 nENABLE
1609                         GPIO3-7:   n.c.
1610                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1611                         GPIO14,15: ??
1612                         GPIO16-21: n.c.
1613                         GPIO22,23: ??
1614                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1615         },
1616         [BTTV_BOARD_DSP_TCVIDEO] = {
1617                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1618                 .name           = "DSP Design TCVIDEO",
1619                 .video_inputs   = 4,
1620                 .svhs           = NO_SVHS,
1621                 .muxsel         = MUXSEL(2, 3, 1, 0),
1622                 .pll            = PLL_28,
1623                 .tuner_type     = UNSET,
1624                 .tuner_addr     = ADDR_UNSET,
1625         },
1626
1627                 /* ---- card 0x50 ---------------------------------- */
1628         [BTTV_BOARD_HAUPPAUGEPVR] = {
1629                 .name           = "Hauppauge WinTV PVR",
1630                 .video_inputs   = 4,
1631                 /* .audio_inputs= 1, */
1632                 .svhs           = 2,
1633                 .muxsel         = MUXSEL(2, 0, 1, 1),
1634                 .needs_tvaudio  = 1,
1635                 .pll            = PLL_28,
1636                 .tuner_type     = UNSET,
1637                 .tuner_addr     = ADDR_UNSET,
1638
1639                 .gpiomask       = 7,
1640                 .gpiomux        = {7},
1641         },
1642         [BTTV_BOARD_GVBCTV5PCI] = {
1643                 .name           = "IODATA GV-BCTV5/PCI",
1644                 .video_inputs   = 3,
1645                 /* .audio_inputs= 1, */
1646                 .svhs           = 2,
1647                 .gpiomask       = 0x0f0f80,
1648                 .muxsel         = MUXSEL(2, 3, 1, 0),
1649                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1650                 .gpiomute       = 0x020000,
1651                 .no_msp34xx     = 1,
1652                 .pll            = PLL_28,
1653                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1654                 .tuner_addr     = ADDR_UNSET,
1655                 .audio_mode_gpio= gvbctv5pci_audio,
1656                 .has_radio      = 1,
1657         },
1658         [BTTV_BOARD_OSPREY1x0] = {
1659                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1660                 .video_inputs   = 4,                  /* id-inputs-clock */
1661                 /* .audio_inputs= 0, */
1662                 .svhs           = 3,
1663                 .muxsel         = MUXSEL(3, 2, 0, 1),
1664                 .pll            = PLL_28,
1665                 .tuner_type     = TUNER_ABSENT,
1666                 .tuner_addr     = ADDR_UNSET,
1667                 .no_msp34xx     = 1,
1668                 .no_tda9875     = 1,
1669                 .no_tda7432     = 1,
1670         },
1671         [BTTV_BOARD_OSPREY1x0_848] = {
1672                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1673                 .video_inputs   = 3,
1674                 /* .audio_inputs= 0, */
1675                 .svhs           = 2,
1676                 .muxsel         = MUXSEL(2, 3, 1),
1677                 .pll            = PLL_28,
1678                 .tuner_type     = TUNER_ABSENT,
1679                 .tuner_addr     = ADDR_UNSET,
1680                 .no_msp34xx     = 1,
1681                 .no_tda9875     = 1,
1682                 .no_tda7432     = 1,
1683         },
1684
1685                 /* ---- card 0x54 ---------------------------------- */
1686         [BTTV_BOARD_OSPREY101_848] = {
1687                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1688                 .video_inputs   = 2,
1689                 /* .audio_inputs= 0, */
1690                 .svhs           = 1,
1691                 .muxsel         = MUXSEL(3, 1),
1692                 .pll            = PLL_28,
1693                 .tuner_type     = TUNER_ABSENT,
1694                 .tuner_addr     = ADDR_UNSET,
1695                 .no_msp34xx     = 1,
1696                 .no_tda9875     = 1,
1697                 .no_tda7432     = 1,
1698         },
1699         [BTTV_BOARD_OSPREY1x1] = {
1700                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1701                 .video_inputs   = 1,
1702                 /* .audio_inputs= 0, */
1703                 .svhs           = NO_SVHS,
1704                 .muxsel         = MUXSEL(0),
1705                 .pll            = PLL_28,
1706                 .tuner_type     = TUNER_ABSENT,
1707                 .tuner_addr     = ADDR_UNSET,
1708                 .no_msp34xx     = 1,
1709                 .no_tda9875     = 1,
1710                 .no_tda7432     = 1,
1711         },
1712         [BTTV_BOARD_OSPREY1x1_SVID] = {
1713                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1714                 .video_inputs   = 2,
1715                 /* .audio_inputs= 0, */
1716                 .svhs           = 1,
1717                 .muxsel         = MUXSEL(0, 1),
1718                 .pll            = PLL_28,
1719                 .tuner_type     = TUNER_ABSENT,
1720                 .tuner_addr     = ADDR_UNSET,
1721                 .no_msp34xx     = 1,
1722                 .no_tda9875     = 1,
1723                 .no_tda7432     = 1,
1724         },
1725         [BTTV_BOARD_OSPREY2xx] = {
1726                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1727                 .video_inputs   = 1,
1728                 /* .audio_inputs= 1, */
1729                 .svhs           = NO_SVHS,
1730                 .muxsel         = MUXSEL(0),
1731                 .pll            = PLL_28,
1732                 .tuner_type     = TUNER_ABSENT,
1733                 .tuner_addr     = ADDR_UNSET,
1734                 .no_msp34xx     = 1,
1735                 .no_tda9875     = 1,
1736                 .no_tda7432     = 1,
1737         },
1738
1739                 /* ---- card 0x58 ---------------------------------- */
1740         [BTTV_BOARD_OSPREY2x0_SVID] = {
1741                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1742                 .video_inputs   = 2,
1743                 /* .audio_inputs= 1, */
1744                 .svhs           = 1,
1745                 .muxsel         = MUXSEL(0, 1),
1746                 .pll            = PLL_28,
1747                 .tuner_type     = TUNER_ABSENT,
1748                 .tuner_addr     = ADDR_UNSET,
1749                 .no_msp34xx     = 1,
1750                 .no_tda9875     = 1,
1751                 .no_tda7432     = 1,
1752         },
1753         [BTTV_BOARD_OSPREY2x0] = {
1754                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1755                 .video_inputs   = 2,
1756                 /* .audio_inputs= 1, */
1757                 .svhs           = 1,
1758                 .muxsel         = MUXSEL(2, 3),
1759                 .pll            = PLL_28,
1760                 .tuner_type     = TUNER_ABSENT,
1761                 .tuner_addr     = ADDR_UNSET,
1762                 .no_msp34xx     = 1,
1763                 .no_tda9875     = 1,
1764                 .no_tda7432     = 1,
1765         },
1766         [BTTV_BOARD_OSPREY500] = {
1767                 .name           = "Osprey 500",   /* 500 */
1768                 .video_inputs   = 2,
1769                 /* .audio_inputs= 1, */
1770                 .svhs           = 1,
1771                 .muxsel         = MUXSEL(2, 3),
1772                 .pll            = PLL_28,
1773                 .tuner_type     = TUNER_ABSENT,
1774                 .tuner_addr     = ADDR_UNSET,
1775                 .no_msp34xx     = 1,
1776                 .no_tda9875     = 1,
1777                 .no_tda7432     = 1,
1778         },
1779         [BTTV_BOARD_OSPREY540] = {
1780                 .name           = "Osprey 540",   /* 540 */
1781                 .video_inputs   = 4,
1782                 /* .audio_inputs= 1, */
1783                 .pll            = PLL_28,
1784                 .tuner_type     = TUNER_ABSENT,
1785                 .tuner_addr     = ADDR_UNSET,
1786                 .no_msp34xx     = 1,
1787                 .no_tda9875     = 1,
1788                 .no_tda7432     = 1,
1789         },
1790
1791                 /* ---- card 0x5C ---------------------------------- */
1792         [BTTV_BOARD_OSPREY2000] = {
1793                 .name           = "Osprey 2000",  /* 2000 */
1794                 .video_inputs   = 2,
1795                 /* .audio_inputs= 1, */
1796                 .svhs           = 1,
1797                 .muxsel         = MUXSEL(2, 3),
1798                 .pll            = PLL_28,
1799                 .tuner_type     = TUNER_ABSENT,
1800                 .tuner_addr     = ADDR_UNSET,
1801                 .no_msp34xx     = 1,
1802                 .no_tda9875     = 1,
1803                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1804         },
1805         [BTTV_BOARD_IDS_EAGLE] = {
1806                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1807                 .name           = "IDS Eagle",
1808                 .video_inputs   = 4,
1809                 /* .audio_inputs= 0, */
1810                 .tuner_type     = TUNER_ABSENT,
1811                 .tuner_addr     = ADDR_UNSET,
1812                 .svhs           = NO_SVHS,
1813                 .gpiomask       = 0,
1814                 .muxsel         = MUXSEL(2, 2, 2, 2),
1815                 .muxsel_hook    = eagle_muxsel,
1816                 .no_msp34xx     = 1,
1817                 .no_tda9875     = 1,
1818                 .pll            = PLL_28,
1819         },
1820         [BTTV_BOARD_PINNACLESAT] = {
1821                 .name           = "Pinnacle PCTV Sat",
1822                 .video_inputs   = 2,
1823                 /* .audio_inputs= 0, */
1824                 .svhs           = 1,
1825                 .tuner_type     = TUNER_ABSENT,
1826                 .tuner_addr     = ADDR_UNSET,
1827                 .no_msp34xx     = 1,
1828                 .no_tda9875     = 1,
1829                 .no_tda7432     = 1,
1830                 .muxsel         = MUXSEL(3, 1),
1831                 .pll            = PLL_28,
1832                 .no_gpioirq     = 1,
1833                 .has_dvb        = 1,
1834         },
1835         [BTTV_BOARD_FORMAC_PROTV] = {
1836                 .name           = "Formac ProTV II (bt878)",
1837                 .video_inputs   = 4,
1838                 /* .audio_inputs= 1, */
1839                 .svhs           = 3,
1840                 .gpiomask       = 2,
1841                 /* TV, Comp1, Composite over SVID con, SVID */
1842                 .muxsel         = MUXSEL(2, 3, 1, 1),
1843                 .gpiomux        = { 2, 2, 0, 0 },
1844                 .pll            = PLL_28,
1845                 .has_radio      = 1,
1846                 .tuner_type     = TUNER_PHILIPS_PAL,
1847                 .tuner_addr     = ADDR_UNSET,
1848         /* sound routing:
1849                 GPIO=0x00,0x01,0x03: mute (?)
1850                 0x02: both TV and radio (tuner: FM1216/I)
1851                 The card has onboard audio connectors labeled "cdrom" and "board",
1852                 not soldered here, though unknown wiring.
1853                 Card lacks: external audio in, pci subsystem id.
1854         */
1855         },
1856
1857                 /* ---- card 0x60 ---------------------------------- */
1858         [BTTV_BOARD_MACHTV] = {
1859                 .name           = "MachTV",
1860                 .video_inputs   = 3,
1861                 /* .audio_inputs= 1, */
1862                 .svhs           = NO_SVHS,
1863                 .gpiomask       = 7,
1864                 .muxsel         = MUXSEL(2, 3, 1, 1),
1865                 .gpiomux        = { 0, 1, 2, 3},
1866                 .gpiomute       = 4,
1867                 .needs_tvaudio  = 1,
1868                 .tuner_type     = TUNER_PHILIPS_PAL,
1869                 .tuner_addr     = ADDR_UNSET,
1870                 .pll            = PLL_28,
1871         },
1872         [BTTV_BOARD_EURESYS_PICOLO] = {
1873                 .name           = "Euresys Picolo",
1874                 .video_inputs   = 3,
1875                 /* .audio_inputs= 0, */
1876                 .svhs           = 2,
1877                 .gpiomask       = 0,
1878                 .no_msp34xx     = 1,
1879                 .no_tda9875     = 1,
1880                 .no_tda7432     = 1,
1881                 .muxsel         = MUXSEL(2, 0, 1),
1882                 .pll            = PLL_28,
1883                 .tuner_type     = TUNER_ABSENT,
1884                 .tuner_addr     = ADDR_UNSET,
1885         },
1886         [BTTV_BOARD_PV150] = {
1887                 /* Luc Van Hoeylandt <luc@e-magic.be> */
1888                 .name           = "ProVideo PV150", /* 0x4f */
1889                 .video_inputs   = 2,
1890                 /* .audio_inputs= 0, */
1891                 .svhs           = NO_SVHS,
1892                 .gpiomask       = 0,
1893                 .muxsel         = MUXSEL(2, 3),
1894                 .gpiomux        = { 0 },
1895                 .needs_tvaudio  = 0,
1896                 .no_msp34xx     = 1,
1897                 .pll            = PLL_28,
1898                 .tuner_type     = TUNER_ABSENT,
1899                 .tuner_addr     = ADDR_UNSET,
1900         },
1901         [BTTV_BOARD_AD_TVK503] = {
1902                 /* Hiroshi Takekawa <sian@big.or.jp> */
1903                 /* This card lacks subsystem ID */
1904                 .name           = "AD-TVK503", /* 0x63 */
1905                 .video_inputs   = 4,
1906                 /* .audio_inputs= 1, */
1907                 .svhs           = 2,
1908                 .gpiomask       = 0x001e8007,
1909                 .muxsel         = MUXSEL(2, 3, 1, 0),
1910                 /*                  Tuner, Radio, external, internal, off,  on */
1911                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1912                 .gpiomute       = 0x0f,
1913                 .needs_tvaudio  = 0,
1914                 .no_msp34xx     = 1,
1915                 .pll            = PLL_28,
1916                 .tuner_type     = TUNER_PHILIPS_NTSC,
1917                 .tuner_addr     = ADDR_UNSET,
1918                 .audio_mode_gpio= adtvk503_audio,
1919         },
1920
1921                 /* ---- card 0x64 ---------------------------------- */
1922         [BTTV_BOARD_HERCULES_SM_TV] = {
1923                 .name           = "Hercules Smart TV Stereo",
1924                 .video_inputs   = 4,
1925                 /* .audio_inputs= 1, */
1926                 .svhs           = 2,
1927                 .gpiomask       = 0x00,
1928                 .muxsel         = MUXSEL(2, 3, 1, 1),
1929                 .needs_tvaudio  = 1,
1930                 .no_msp34xx     = 1,
1931                 .pll            = PLL_28,
1932                 .tuner_type     = TUNER_PHILIPS_PAL,
1933                 .tuner_addr     = ADDR_UNSET,
1934                 /* Notes:
1935                 - card lacks subsystem ID
1936                 - stereo variant w/ daughter board with tda9874a @0xb0
1937                 - Audio Routing:
1938                         always from tda9874 independent of GPIO (?)
1939                         external line in: unknown
1940                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1941                         hef4053 (instead 4052) for unknown function
1942                 */
1943         },
1944         [BTTV_BOARD_PACETV] = {
1945                 .name           = "Pace TV & Radio Card",
1946                 .video_inputs   = 4,
1947                 /* .audio_inputs= 1, */
1948                 .svhs           = 2,
1949                 /* Tuner, CVid, SVid, CVid over SVid connector */
1950                 .muxsel         = MUXSEL(2, 3, 1, 1),
1951                 .gpiomask       = 0,
1952                 .no_tda9875     = 1,
1953                 .no_tda7432     = 1,
1954                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1955                 .tuner_addr     = ADDR_UNSET,
1956                 .has_radio      = 1,
1957                 .pll            = PLL_28,
1958                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1959                 only internal line out: (4pin header) RGGL
1960                 Radio must be decoded by msp3410d (not routed through)*/
1961                 /*
1962                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1963                 */
1964         },
1965         [BTTV_BOARD_IVC200] = {
1966                 /* Chris Willing <chris@vislab.usyd.edu.au> */
1967                 .name           = "IVC-200",
1968                 .video_inputs   = 1,
1969                 /* .audio_inputs= 0, */
1970                 .tuner_type     = TUNER_ABSENT,
1971                 .tuner_addr     = ADDR_UNSET,
1972                 .svhs           = NO_SVHS,
1973                 .gpiomask       = 0xdf,
1974                 .muxsel         = MUXSEL(2),
1975                 .pll            = PLL_28,
1976         },
1977         [BTTV_BOARD_IVCE8784] = {
1978                 .name           = "IVCE-8784",
1979                 .video_inputs   = 1,
1980                 /* .audio_inputs= 0, */
1981                 .tuner_type     = TUNER_ABSENT,
1982                 .tuner_addr     = ADDR_UNSET,
1983                 .svhs           = NO_SVHS,
1984                 .gpiomask       = 0xdf,
1985                 .muxsel         = MUXSEL(2),
1986                 .pll            = PLL_28,
1987         },
1988         [BTTV_BOARD_XGUARD] = {
1989                 .name           = "Grand X-Guard / Trust 814PCI",
1990                 .video_inputs   = 16,
1991                 /* .audio_inputs= 0, */
1992                 .svhs           = NO_SVHS,
1993                 .tuner_type     = TUNER_ABSENT,
1994                 .tuner_addr     = ADDR_UNSET,
1995                 .gpiomask2      = 0xff,
1996                 .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1997                 .muxsel_hook    = xguard_muxsel,
1998                 .no_msp34xx     = 1,
1999                 .no_tda9875     = 1,
2000                 .no_tda7432     = 1,
2001                 .pll            = PLL_28,
2002         },
2003
2004                 /* ---- card 0x68 ---------------------------------- */
2005         [BTTV_BOARD_NEBULA_DIGITV] = {
2006                 .name           = "Nebula Electronics DigiTV",
2007                 .video_inputs   = 1,
2008                 .svhs           = NO_SVHS,
2009                 .muxsel         = MUXSEL(2, 3, 1, 0),
2010                 .no_msp34xx     = 1,
2011                 .no_tda9875     = 1,
2012                 .no_tda7432     = 1,
2013                 .pll            = PLL_28,
2014                 .tuner_type     = TUNER_ABSENT,
2015                 .tuner_addr     = ADDR_UNSET,
2016                 .has_dvb        = 1,
2017                 .has_remote     = 1,
2018                 .gpiomask       = 0x1b,
2019                 .no_gpioirq     = 1,
2020         },
2021         [BTTV_BOARD_PV143] = {
2022                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2023                 .name           = "ProVideo PV143",
2024                 .video_inputs   = 4,
2025                 /* .audio_inputs= 0, */
2026                 .svhs           = NO_SVHS,
2027                 .gpiomask       = 0,
2028                 .muxsel         = MUXSEL(2, 3, 1, 0),
2029                 .gpiomux        = { 0 },
2030                 .needs_tvaudio  = 0,
2031                 .no_msp34xx     = 1,
2032                 .pll            = PLL_28,
2033                 .tuner_type     = TUNER_ABSENT,
2034                 .tuner_addr     = ADDR_UNSET,
2035         },
2036         [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2037                 /* M.Klahr@phytec.de */
2038                 .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2039                 .video_inputs   = 4,
2040                 /* .audio_inputs= 0, */
2041                 .svhs           = 3,
2042                 .gpiomask       = 0x00,
2043                 .muxsel         = MUXSEL(2, 3, 1, 0),
2044                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2045                 .needs_tvaudio  = 0,
2046                 .pll            = PLL_28,
2047                 .tuner_type     = TUNER_ABSENT,
2048                 .tuner_addr     = ADDR_UNSET,
2049         },
2050         [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2051                 .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2052                 .video_inputs   = 4,
2053                 /* .audio_inputs= 0, */
2054                 .svhs           = 3,
2055                 .gpiomask       = 0x00,
2056                 .muxsel         = MUXSEL(2, 3, 1, 1),
2057                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2058                 .needs_tvaudio  = 0,
2059                 .pll            = PLL_28,
2060                 .tuner_type     = TUNER_ABSENT,
2061                 .tuner_addr     = ADDR_UNSET,
2062         },
2063
2064                 /* ---- card 0x6c ---------------------------------- */
2065         [BTTV_BOARD_VD009_MINIDIN] = {
2066                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2067                 .video_inputs   = 10,
2068                 /* .audio_inputs= 0, */
2069                 .svhs           = 9,
2070                 .gpiomask       = 0x00,
2071                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2072                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2073                 .muxsel_hook    = phytec_muxsel,
2074                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2075                 .needs_tvaudio  = 1,
2076                 .pll            = PLL_28,
2077                 .tuner_type     = TUNER_ABSENT,
2078                 .tuner_addr     = ADDR_UNSET,
2079         },
2080         [BTTV_BOARD_VD009_COMBI] = {
2081                 .name           = "PHYTEC VD-009 Combi (bt878)",
2082                 .video_inputs   = 10,
2083                 /* .audio_inputs= 0, */
2084                 .svhs           = 9,
2085                 .gpiomask       = 0x00,
2086                 .gpiomask2      = 0x03, /* used for external vodeo mux */
2087                 .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2088                 .muxsel_hook    = phytec_muxsel,
2089                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2090                 .needs_tvaudio  = 1,
2091                 .pll            = PLL_28,
2092                 .tuner_type     = TUNER_ABSENT,
2093                 .tuner_addr     = ADDR_UNSET,
2094         },
2095         [BTTV_BOARD_IVC100] = {
2096                 .name           = "IVC-100",
2097                 .video_inputs   = 4,
2098                 /* .audio_inputs= 0, */
2099                 .tuner_type     = TUNER_ABSENT,
2100                 .tuner_addr     = ADDR_UNSET,
2101                 .svhs           = NO_SVHS,
2102                 .gpiomask       = 0xdf,
2103                 .muxsel         = MUXSEL(2, 3, 1, 0),
2104                 .pll            = PLL_28,
2105         },
2106         [BTTV_BOARD_IVC120] = {
2107                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2108                 .name           = "IVC-120G",
2109                 .video_inputs   = 16,
2110                 /* .audio_inputs= 0, */
2111                 .tuner_type     = TUNER_ABSENT,
2112                 .tuner_addr     = ADDR_UNSET,
2113                 .svhs           = NO_SVHS,   /* card has no svhs */
2114                 .needs_tvaudio  = 0,
2115                 .no_msp34xx     = 1,
2116                 .no_tda9875     = 1,
2117                 .no_tda7432     = 1,
2118                 .gpiomask       = 0x00,
2119                 .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2120                 .muxsel_hook    = ivc120_muxsel,
2121                 .pll            = PLL_28,
2122         },
2123
2124                 /* ---- card 0x70 ---------------------------------- */
2125         [BTTV_BOARD_PC_HDTV] = {
2126                 .name           = "pcHDTV HD-2000 TV",
2127                 .video_inputs   = 4,
2128                 /* .audio_inputs= 1, */
2129                 .svhs           = 2,
2130                 .muxsel         = MUXSEL(2, 3, 1, 0),
2131                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2132                 .tuner_addr     = ADDR_UNSET,
2133                 .has_dvb        = 1,
2134         },
2135         [BTTV_BOARD_TWINHAN_DST] = {
2136                 .name           = "Twinhan DST + clones",
2137                 .no_msp34xx     = 1,
2138                 .no_tda9875     = 1,
2139                 .no_tda7432     = 1,
2140                 .tuner_type     = TUNER_ABSENT,
2141                 .tuner_addr     = ADDR_UNSET,
2142                 .no_video       = 1,
2143                 .has_dvb        = 1,
2144         },
2145         [BTTV_BOARD_WINFASTVC100] = {
2146                 .name           = "Winfast VC100",
2147                 .video_inputs   = 3,
2148                 /* .audio_inputs= 0, */
2149                 .svhs           = 1,
2150                 /* Vid In, SVid In, Vid over SVid in connector */
2151                 .muxsel         = MUXSEL(3, 1, 1, 3),
2152                 .no_msp34xx     = 1,
2153                 .no_tda9875     = 1,
2154                 .no_tda7432     = 1,
2155                 .tuner_type     = TUNER_ABSENT,
2156                 .tuner_addr     = ADDR_UNSET,
2157                 .pll            = PLL_28,
2158         },
2159         [BTTV_BOARD_TEV560] = {
2160                 .name           = "Teppro TEV-560/InterVision IV-560",
2161                 .video_inputs   = 3,
2162                 /* .audio_inputs= 1, */
2163                 .svhs           = 2,
2164                 .gpiomask       = 3,
2165                 .muxsel         = MUXSEL(2, 3, 1, 1),
2166                 .gpiomux        = { 1, 1, 1, 1 },
2167                 .needs_tvaudio  = 1,
2168                 .tuner_type     = TUNER_PHILIPS_PAL,
2169                 .tuner_addr     = ADDR_UNSET,
2170                 .pll            = PLL_35,
2171         },
2172
2173                 /* ---- card 0x74 ---------------------------------- */
2174         [BTTV_BOARD_SIMUS_GVC1100] = {
2175                 .name           = "SIMUS GVC1100",
2176                 .video_inputs   = 4,
2177                 /* .audio_inputs= 0, */
2178                 .svhs           = NO_SVHS,
2179                 .tuner_type     = TUNER_ABSENT,
2180                 .tuner_addr     = ADDR_UNSET,
2181                 .pll            = PLL_28,
2182                 .muxsel         = MUXSEL(2, 2, 2, 2),
2183                 .gpiomask       = 0x3F,
2184                 .muxsel_hook    = gvc1100_muxsel,
2185         },
2186         [BTTV_BOARD_NGSTV_PLUS] = {
2187                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2188                 .name           = "NGS NGSTV+",
2189                 .video_inputs   = 3,
2190                 .svhs           = 2,
2191                 .gpiomask       = 0x008007,
2192                 .muxsel         = MUXSEL(2, 3, 0, 0),
2193                 .gpiomux        = { 0, 0, 0, 0 },
2194                 .gpiomute       = 0x000003,
2195                 .pll            = PLL_28,
2196                 .tuner_type     = TUNER_PHILIPS_PAL,
2197                 .tuner_addr     = ADDR_UNSET,
2198                 .has_remote     = 1,
2199         },
2200         [BTTV_BOARD_LMLBT4] = {
2201                 /* http://linuxmedialabs.com */
2202                 .name           = "LMLBT4",
2203                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2204                 /* .audio_inputs= 0, */
2205                 .svhs           = NO_SVHS,
2206                 .muxsel         = MUXSEL(2, 3, 1, 0),
2207                 .no_msp34xx     = 1,
2208                 .no_tda9875     = 1,
2209                 .no_tda7432     = 1,
2210                 .needs_tvaudio  = 0,
2211                 .tuner_type     = TUNER_ABSENT,
2212                 .tuner_addr     = ADDR_UNSET,
2213         },
2214         [BTTV_BOARD_TEKRAM_M205] = {
2215                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2216                 .name           = "Tekram M205 PRO",
2217                 .video_inputs   = 3,
2218                 /* .audio_inputs= 1, */
2219                 .tuner_type     = TUNER_PHILIPS_PAL,
2220                 .tuner_addr     = ADDR_UNSET,
2221                 .svhs           = 2,
2222                 .needs_tvaudio  = 0,
2223                 .gpiomask       = 0x68,
2224                 .muxsel         = MUXSEL(2, 3, 1),
2225                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2226                 .pll            = PLL_28,
2227         },
2228
2229                 /* ---- card 0x78 ---------------------------------- */
2230         [BTTV_BOARD_CONTVFMI] = {
2231                 /* Javier Cendan Ares <jcendan@lycos.es> */
2232                 /* bt878 TV + FM without subsystem ID */
2233                 .name           = "Conceptronic CONTVFMi",
2234                 .video_inputs   = 3,
2235                 /* .audio_inputs= 1, */
2236                 .svhs           = 2,
2237                 .gpiomask       = 0x008007,
2238                 .muxsel         = MUXSEL(2, 3, 1, 1),
2239                 .gpiomux        = { 0, 1, 2, 2 },
2240                 .gpiomute       = 3,
2241                 .needs_tvaudio  = 0,
2242                 .pll            = PLL_28,
2243                 .tuner_type     = TUNER_PHILIPS_PAL,
2244                 .tuner_addr     = ADDR_UNSET,
2245                 .has_remote     = 1,
2246                 .has_radio      = 1,
2247         },
2248         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2249                 /*Eric DEBIEF <debief@telemsa.com>*/
2250                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2251                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2252                 /*0x79 in bttv.h*/
2253                 .name           = "Euresys Picolo Tetra",
2254                 .video_inputs   = 4,
2255                 /* .audio_inputs= 0, */
2256                 .svhs           = NO_SVHS,
2257                 .gpiomask       = 0,
2258                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2259                 .no_msp34xx     = 1,
2260                 .no_tda9875     = 1,
2261                 .no_tda7432     = 1,
2262                 /*878A input is always MUX0, see above.*/
2263                 .muxsel         = MUXSEL(2, 2, 2, 2),
2264                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2265                 .pll            = PLL_28,
2266                 .needs_tvaudio  = 0,
2267                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2268                 .tuner_type     = TUNER_ABSENT,
2269                 .tuner_addr     = ADDR_UNSET,
2270         },
2271         [BTTV_BOARD_SPIRIT_TV] = {
2272                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2273                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2274                 .name           = "Spirit TV Tuner",
2275                 .video_inputs   = 3,
2276                 /* .audio_inputs= 1, */
2277                 .svhs           = 2,
2278                 .gpiomask       = 0x0000000f,
2279                 .muxsel         = MUXSEL(2, 1, 1),
2280                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2281                 .tuner_type     = TUNER_TEMIC_PAL,
2282                 .tuner_addr     = ADDR_UNSET,
2283                 .no_msp34xx     = 1,
2284                 .no_tda9875     = 1,
2285         },
2286         [BTTV_BOARD_AVDVBT_771] = {
2287                 /* Wolfram Joost <wojo@frokaschwei.de> */
2288                 .name           = "AVerMedia AVerTV DVB-T 771",
2289                 .video_inputs   = 2,
2290                 .svhs           = 1,
2291                 .tuner_type     = TUNER_ABSENT,
2292                 .tuner_addr     = ADDR_UNSET,
2293                 .muxsel         = MUXSEL(3, 3),
2294                 .no_msp34xx     = 1,
2295                 .no_tda9875     = 1,
2296                 .no_tda7432     = 1,
2297                 .pll            = PLL_28,
2298                 .has_dvb        = 1,
2299                 .no_gpioirq     = 1,
2300                 .has_remote     = 1,
2301         },
2302                 /* ---- card 0x7c ---------------------------------- */
2303         [BTTV_BOARD_AVDVBT_761] = {
2304                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2305                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2306                 .name           = "AverMedia AverTV DVB-T 761",
2307                 .video_inputs   = 2,
2308                 .svhs           = 1,
2309                 .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2310                 .no_msp34xx     = 1,
2311                 .no_tda9875     = 1,
2312                 .no_tda7432     = 1,
2313                 .pll            = PLL_28,
2314                 .tuner_type     = TUNER_ABSENT,
2315                 .tuner_addr     = ADDR_UNSET,
2316                 .has_dvb        = 1,
2317                 .no_gpioirq     = 1,
2318                 .has_remote     = 1,
2319         },
2320         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2321                 /* andre.schwarz@matrix-vision.de */
2322                 .name           = "MATRIX Vision Sigma-SQ",
2323                 .video_inputs   = 16,
2324                 /* .audio_inputs= 0, */
2325                 .svhs           = NO_SVHS,
2326                 .gpiomask       = 0x0,
2327                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2328                 .muxsel_hook    = sigmaSQ_muxsel,
2329                 .gpiomux        = { 0 },
2330                 .no_msp34xx     = 1,
2331                 .pll            = PLL_28,
2332                 .tuner_type     = TUNER_ABSENT,
2333                 .tuner_addr     = ADDR_UNSET,
2334         },
2335         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2336                 /* andre.schwarz@matrix-vision.de */
2337                 .name           = "MATRIX Vision Sigma-SLC",
2338                 .video_inputs   = 4,
2339                 /* .audio_inputs= 0, */
2340                 .svhs           = NO_SVHS,
2341                 .gpiomask       = 0x0,
2342                 .muxsel         = MUXSEL(2, 2, 2, 2),
2343                 .muxsel_hook    = sigmaSLC_muxsel,
2344                 .gpiomux        = { 0 },
2345                 .no_msp34xx     = 1,
2346                 .pll            = PLL_28,
2347                 .tuner_type     = TUNER_ABSENT,
2348                 .tuner_addr     = ADDR_UNSET,
2349         },
2350                 /* BTTV_BOARD_APAC_VIEWCOMP */
2351         [BTTV_BOARD_APAC_VIEWCOMP] = {
2352                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2353                 /* bt878 TV + FM 0x00000000 subsystem ID */
2354                 .name           = "APAC Viewcomp 878(AMAX)",
2355                 .video_inputs   = 2,
2356                 /* .audio_inputs= 1, */
2357                 .svhs           = NO_SVHS,
2358                 .gpiomask       = 0xFF,
2359                 .muxsel         = MUXSEL(2, 3, 1, 1),
2360                 .gpiomux        = { 2, 0, 0, 0 },
2361                 .gpiomute       = 10,
2362                 .needs_tvaudio  = 0,
2363                 .pll            = PLL_28,
2364                 .tuner_type     = TUNER_PHILIPS_PAL,
2365                 .tuner_addr     = ADDR_UNSET,
2366                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2367                 .has_radio      = 1,   /* not every card has radio */
2368         },
2369
2370                 /* ---- card 0x80 ---------------------------------- */
2371         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2372                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2373                 .name           = "DViCO FusionHDTV DVB-T Lite",
2374                 .no_msp34xx     = 1,
2375                 .no_tda9875     = 1,
2376                 .no_tda7432     = 1,
2377                 .pll            = PLL_28,
2378                 .no_video       = 1,
2379                 .has_dvb        = 1,
2380                 .tuner_type     = TUNER_ABSENT,
2381                 .tuner_addr     = ADDR_UNSET,
2382         },
2383         [BTTV_BOARD_VGEAR_MYVCD] = {
2384                 /* Steven <photon38@pchome.com.tw> */
2385                 .name           = "V-Gear MyVCD",
2386                 .video_inputs   = 3,
2387                 /* .audio_inputs= 1, */
2388                 .svhs           = 2,
2389                 .gpiomask       = 0x3f,
2390                 .muxsel         = MUXSEL(2, 3, 1, 0),
2391                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2392                 .gpiomute       = 0x31,
2393                 .no_msp34xx     = 1,
2394                 .pll            = PLL_28,
2395                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2396                 .tuner_addr     = ADDR_UNSET,
2397                 .has_radio      = 0,
2398         },
2399         [BTTV_BOARD_SUPER_TV] = {
2400                 /* Rick C <cryptdragoon@gmail.com> */
2401                 .name           = "Super TV Tuner",
2402                 .video_inputs   = 4,
2403                 /* .audio_inputs= 1, */
2404                 .svhs           = 2,
2405                 .muxsel         = MUXSEL(2, 3, 1, 0),
2406                 .tuner_type     = TUNER_PHILIPS_NTSC,
2407                 .tuner_addr     = ADDR_UNSET,
2408                 .gpiomask       = 0x008007,
2409                 .gpiomux        = { 0, 0x000001,0,0 },
2410                 .needs_tvaudio  = 1,
2411                 .has_radio      = 1,
2412         },
2413         [BTTV_BOARD_TIBET_CS16] = {
2414                 /* Chris Fanning <video4linux@haydon.net> */
2415                 .name           = "Tibet Systems 'Progress DVR' CS16",
2416                 .video_inputs   = 16,
2417                 /* .audio_inputs= 0, */
2418                 .svhs           = NO_SVHS,
2419                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2420                 .pll            = PLL_28,
2421                 .no_msp34xx     = 1,
2422                 .no_tda9875     = 1,
2423                 .no_tda7432     = 1,
2424                 .tuner_type     = TUNER_ABSENT,
2425                 .tuner_addr     = ADDR_UNSET,
2426                 .muxsel_hook    = tibetCS16_muxsel,
2427         },
2428         [BTTV_BOARD_KODICOM_4400R] = {
2429                 /* Bill Brack <wbrack@mmm.com.hk> */
2430                 /*
2431                 * Note that, because of the card's wiring, the "master"
2432                 * BT878A chip (i.e. the one which controls the analog switch
2433                 * and must use this card type) is the 2nd one detected.  The
2434                 * other 3 chips should use card type 0x85, whose description
2435                 * follows this one.  There is a EEPROM on the card (which is
2436                 * connected to the I2C of one of those other chips), but is
2437                 * not currently handled.  There is also a facility for a
2438                 * "monitor", which is also not currently implemented.
2439                 */
2440                 .name           = "Kodicom 4400R (master)",
2441                 .video_inputs   = 16,
2442                 /* .audio_inputs= 0, */
2443                 .tuner_type     = TUNER_ABSENT,
2444                 .tuner_addr     = ADDR_UNSET,
2445                 .svhs           = NO_SVHS,
2446                 /* GPIO bits 0-9 used for analog switch:
2447                 *   00 - 03:    camera selector
2448                 *   04 - 06:    channel (controller) selector
2449                 *   07: data (1->on, 0->off)
2450                 *   08: strobe
2451                 *   09: reset
2452                 * bit 16 is input from sync separator for the channel
2453                 */
2454                 .gpiomask       = 0x0003ff,
2455                 .no_gpioirq     = 1,
2456                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2457                 .pll            = PLL_28,
2458                 .no_msp34xx     = 1,
2459                 .no_tda7432     = 1,
2460                 .no_tda9875     = 1,
2461                 .muxsel_hook    = kodicom4400r_muxsel,
2462         },
2463         [BTTV_BOARD_KODICOM_4400R_SL] = {
2464                 /* Bill Brack <wbrack@mmm.com.hk> */
2465                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2466                 * one which controls the analog switch, and must use the card type)
2467                 * is the 2nd one detected.  The other 3 chips should use this card
2468                 * type
2469                 */
2470                 .name           = "Kodicom 4400R (slave)",
2471                 .video_inputs   = 16,
2472                 /* .audio_inputs= 0, */
2473                 .tuner_type     = TUNER_ABSENT,
2474                 .tuner_addr     = ADDR_UNSET,
2475                 .svhs           = NO_SVHS,
2476                 .gpiomask       = 0x010000,
2477                 .no_gpioirq     = 1,
2478                 .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2479                 .pll            = PLL_28,
2480                 .no_msp34xx     = 1,
2481                 .no_tda7432     = 1,
2482                 .no_tda9875     = 1,
2483                 .muxsel_hook    = kodicom4400r_muxsel,
2484         },
2485                 /* ---- card 0x86---------------------------------- */
2486         [BTTV_BOARD_ADLINK_RTV24] = {
2487                 /* Michael Henson <mhenson@clarityvi.com> */
2488                 /* Adlink RTV24 with special unlock codes */
2489                 .name           = "Adlink RTV24",
2490                 .video_inputs   = 4,
2491                 /* .audio_inputs= 1, */
2492                 .svhs           = 2,
2493                 .muxsel         = MUXSEL(2, 3, 1, 0),
2494                 .tuner_type     = UNSET,
2495                 .tuner_addr     = ADDR_UNSET,
2496                 .pll            = PLL_28,
2497         },
2498                 /* ---- card 0x87---------------------------------- */
2499         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2500                 /* Michael Krufky <mkrufky@m1k.net> */
2501                 .name           = "DViCO FusionHDTV 5 Lite",
2502                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2503                 .tuner_addr     = ADDR_UNSET,
2504                 .video_inputs   = 3,
2505                 /* .audio_inputs= 1, */
2506                 .svhs           = 2,
2507                 .muxsel         = MUXSEL(2, 3, 1),
2508                 .gpiomask       = 0x00e00007,
2509                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2510                 .gpiomute       = 0x00c00007,
2511                 .no_msp34xx     = 1,
2512                 .no_tda9875     = 1,
2513                 .no_tda7432     = 1,
2514                 .has_dvb        = 1,
2515         },
2516                 /* ---- card 0x88---------------------------------- */
2517         [BTTV_BOARD_ACORP_Y878F] = {
2518                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2519                 .name           = "Acorp Y878F",
2520                 .video_inputs   = 3,
2521                 /* .audio_inputs= 1, */
2522                 .svhs           = 2,
2523                 .gpiomask       = 0x01fe00,
2524                 .muxsel         = MUXSEL(2, 3, 1, 1),
2525                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2526                 .gpiomute       = 0x002000,
2527                 .needs_tvaudio  = 1,
2528                 .pll            = PLL_28,
2529                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2530                 .tuner_addr     = 0xc1 >>1,
2531                 .has_radio      = 1,
2532         },
2533                 /* ---- card 0x89 ---------------------------------- */
2534         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2535                 .name           = "Conceptronic CTVFMi v2",
2536                 .video_inputs   = 3,
2537                 /* .audio_inputs= 1, */
2538                 .svhs           = 2,
2539                 .gpiomask       = 0x001c0007,
2540                 .muxsel         = MUXSEL(2, 3, 1, 1),
2541                 .gpiomux        = { 0, 1, 2, 2 },
2542                 .gpiomute       = 3,
2543                 .needs_tvaudio  = 0,
2544                 .pll            = PLL_28,
2545                 .tuner_type     = TUNER_TENA_9533_DI,
2546                 .tuner_addr     = ADDR_UNSET,
2547                 .has_remote     = 1,
2548                 .has_radio      = 1,
2549         },
2550                 /* ---- card 0x8a ---------------------------------- */
2551         [BTTV_BOARD_PV_BT878P_2E] = {
2552                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2553                 .video_inputs   = 5,
2554                 /* .audio_inputs= 1, */
2555                 .svhs           = 3,
2556                 .has_dig_in     = 1,
2557                 .gpiomask       = 0x01fe00,
2558                 .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2559                 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2560                 .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2561                 .gpiomute       = 0x12400,
2562                 .no_msp34xx     = 1,
2563                 .pll            = PLL_28,
2564                 .tuner_type     = TUNER_LG_PAL_FM,
2565                 .tuner_addr     = ADDR_UNSET,
2566                 .has_remote     = 1,
2567         },
2568                 /* ---- card 0x8b ---------------------------------- */
2569         [BTTV_BOARD_PV_M4900] = {
2570                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2571                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2572                 .video_inputs   = 3,
2573                 /* .audio_inputs= 1, */
2574                 .svhs           = 2,
2575                 .gpiomask       = 0x3f,
2576                 .muxsel         = MUXSEL(2, 3, 1, 1),
2577                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2578                 .gpiomute       = 0x29,
2579                 .no_msp34xx     = 1,
2580                 .pll            = PLL_28,
2581                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2582                 .tuner_addr     = ADDR_UNSET,
2583                 .has_radio      = 1,
2584                 .has_remote     = 1,
2585         },
2586                 /* ---- card 0x8c ---------------------------------- */
2587         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2588              one external BNC composite input (mux 2)
2589              three internal composite inputs (unknown muxes)
2590              an 18-bit stereo A/D (CS5331A), which has:
2591                one external stereo unblanced (RCA) audio connection
2592                one (or 3?) internal stereo balanced (XLR) audio connection
2593                input is selected via gpio to a 14052B mux
2594                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2595                gain is controlled via an X9221A chip on the I2C bus @0x28
2596                sample rate is controlled via gpio to an MK1413S
2597                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2598              There is neither a tuner nor an svideo input. */
2599         [BTTV_BOARD_OSPREY440]  = {
2600                 .name           = "Osprey 440",
2601                 .video_inputs   = 4,
2602                 /* .audio_inputs= 2, */
2603                 .svhs           = NO_SVHS,
2604                 .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2605                 .gpiomask       = 0x303,
2606                 .gpiomute       = 0x000, /* int + 32kHz */
2607                 .gpiomux        = { 0, 0, 0x000, 0x100},
2608                 .pll            = PLL_28,
2609                 .tuner_type     = TUNER_ABSENT,
2610                 .tuner_addr     = ADDR_UNSET,
2611                 .no_msp34xx     = 1,
2612                 .no_tda9875     = 1,
2613                 .no_tda7432     = 1,
2614         },
2615                 /* ---- card 0x8d ---------------------------------- */
2616         [BTTV_BOARD_ASOUND_SKYEYE] = {
2617                 .name           = "Asound Skyeye PCTV",
2618                 .video_inputs   = 3,
2619                 /* .audio_inputs= 1, */
2620                 .svhs           = 2,
2621                 .gpiomask       = 15,
2622                 .muxsel         = MUXSEL(2, 3, 1, 1),
2623                 .gpiomux        = { 2, 0, 0, 0 },
2624                 .gpiomute       = 1,
2625                 .needs_tvaudio  = 1,
2626                 .pll            = PLL_28,
2627                 .tuner_type     = TUNER_PHILIPS_NTSC,
2628                 .tuner_addr     = ADDR_UNSET,
2629         },
2630                 /* ---- card 0x8e ---------------------------------- */
2631         [BTTV_BOARD_SABRENT_TVFM] = {
2632                 .name           = "Sabrent TV-FM (bttv version)",
2633                 .video_inputs   = 3,
2634                 /* .audio_inputs= 1, */
2635                 .svhs           = 2,
2636                 .gpiomask       = 0x108007,
2637                 .muxsel         = MUXSEL(2, 3, 1, 1),
2638                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2639                 .no_msp34xx     = 1,
2640                 .no_tda9875     = 1,
2641                 .no_tda7432     = 1,
2642                 .pll            = PLL_28,
2643                 .tuner_type     = TUNER_TNF_5335MF,
2644                 .tuner_addr     = ADDR_UNSET,
2645                 .has_radio      = 1,
2646         },
2647         /* ---- card 0x8f ---------------------------------- */
2648         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2649                 .name           = "Hauppauge ImpactVCB (bt878)",
2650                 .video_inputs   = 4,
2651                 /* .audio_inputs= 0, */
2652                 .svhs           = NO_SVHS,
2653                 .gpiomask       = 0x0f, /* old: 7 */
2654                 .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2655                 .no_msp34xx     = 1,
2656                 .no_tda9875     = 1,
2657                 .no_tda7432     = 1,
2658                 .tuner_type     = TUNER_ABSENT,
2659                 .tuner_addr     = ADDR_UNSET,
2660         },
2661         [BTTV_BOARD_MACHTV_MAGICTV] = {
2662                 /* Julian Calaby <julian.calaby@gmail.com>
2663                  * Slightly different from original MachTV definition (0x60)
2664
2665                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2666                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2667                  * properly (methinks) causing no keyup bits being set */
2668
2669                 .name           = "MagicTV", /* rebranded MachTV */
2670                 .video_inputs   = 3,
2671                 /* .audio_inputs= 1, */
2672                 .svhs           = 2,
2673                 .gpiomask       = 7,
2674                 .muxsel         = MUXSEL(2, 3, 1, 1),
2675                 .gpiomux        = { 0, 1, 2, 3 },
2676                 .gpiomute       = 4,
2677                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2678                 .tuner_addr     = ADDR_UNSET,
2679                 .pll            = PLL_28,
2680                 .has_radio      = 1,
2681                 .has_remote     = 1,
2682         },
2683         [BTTV_BOARD_SSAI_SECURITY] = {
2684                 .name           = "SSAI Security Video Interface",
2685                 .video_inputs   = 4,
2686                 /* .audio_inputs= 0, */
2687                 .svhs           = NO_SVHS,
2688                 .muxsel         = MUXSEL(0, 1, 2, 3),
2689                 .tuner_type     = TUNER_ABSENT,
2690                 .tuner_addr     = ADDR_UNSET,
2691         },
2692         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2693                 .name           = "SSAI Ultrasound Video Interface",
2694                 .video_inputs   = 2,
2695                 /* .audio_inputs= 0, */
2696                 .svhs           = 1,
2697                 .muxsel         = MUXSEL(2, 0, 1, 3),
2698                 .tuner_type     = TUNER_ABSENT,
2699                 .tuner_addr     = ADDR_UNSET,
2700         },
2701         /* ---- card 0x94---------------------------------- */
2702         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2703                 .name           = "DViCO FusionHDTV 2",
2704                 .tuner_type     = TUNER_PHILIPS_FCV1236D,
2705                 .tuner_addr     = ADDR_UNSET,
2706                 .video_inputs   = 3,
2707                 /* .audio_inputs= 1, */
2708                 .svhs           = 2,
2709                 .muxsel         = MUXSEL(2, 3, 1),
2710                 .gpiomask       = 0x00e00007,
2711                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2712                 .gpiomute       = 0x00c00007,
2713                 .no_msp34xx     = 1,
2714                 .no_tda9875     = 1,
2715                 .no_tda7432     = 1,
2716         },
2717         /* ---- card 0x95---------------------------------- */
2718         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2719                 .name           = "Typhoon TV-Tuner PCI (50684)",
2720                 .video_inputs   = 3,
2721                 /* .audio_inputs= 1, */
2722                 .svhs           = 2,
2723                 .gpiomask       = 0x3014f,
2724                 .muxsel         = MUXSEL(2, 3, 1, 1),
2725                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2726                 .gpiomute       = 10,
2727                 .needs_tvaudio  = 1,
2728                 .pll            = PLL_28,
2729                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2730                 .tuner_addr     = ADDR_UNSET,
2731         },
2732         [BTTV_BOARD_GEOVISION_GV600] = {
2733                 /* emhn@usb.ve */
2734                 .name           = "Geovision GV-600",
2735                 .video_inputs   = 16,
2736                 /* .audio_inputs= 0, */
2737                 .svhs           = NO_SVHS,
2738                 .gpiomask       = 0x0,
2739                 .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2740                 .muxsel_hook    = geovision_muxsel,
2741                 .gpiomux        = { 0 },
2742                 .no_msp34xx     = 1,
2743                 .pll            = PLL_28,
2744                 .tuner_type     = TUNER_ABSENT,
2745                 .tuner_addr     = ADDR_UNSET,
2746         },
2747         [BTTV_BOARD_KOZUMI_KTV_01C] = {
2748                 /* Mauro Lacy <mauro@lacy.com.ar>
2749                  * Based on MagicTV and Conceptronic CONTVFMi */
2750
2751                 .name           = "Kozumi KTV-01C",
2752                 .video_inputs   = 3,
2753                 /* .audio_inputs= 1, */
2754                 .svhs           = 2,
2755                 .gpiomask       = 0x008007,
2756                 .muxsel         = MUXSEL(2, 3, 1, 1),
2757                 .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2758                 .gpiomute       = 3, /* CONTVFMi */
2759                 .needs_tvaudio  = 0,
2760                 .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2761                 .tuner_addr     = ADDR_UNSET,
2762                 .pll            = PLL_28,
2763                 .has_radio      = 1,
2764                 .has_remote     = 1,
2765         },
2766         [BTTV_BOARD_ENLTV_FM_2] = {
2767                 /* Encore TV Tuner Pro ENL TV-FM-2
2768                    Mauro Carvalho Chehab <mchehab@infradead.org */
2769                 .name           = "Encore ENL TV-FM-2",
2770                 .video_inputs   = 3,
2771                 /* .audio_inputs= 1, */
2772                 .svhs           = 2,
2773                 /* bit 6          -> IR disabled
2774                    bit 18/17 = 00 -> mute
2775                                01 -> enable external audio input
2776                                10 -> internal audio input (mono?)
2777                                11 -> internal audio input
2778                  */
2779                 .gpiomask       = 0x060040,
2780                 .muxsel         = MUXSEL(2, 3, 3),
2781                 .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2782                 .gpiomute       = 0,
2783                 .tuner_type     = TUNER_TCL_MF02GIP_5N,
2784                 .tuner_addr     = ADDR_UNSET,
2785                 .pll            = PLL_28,
2786                 .has_radio      = 1,
2787                 .has_remote     = 1,
2788         },
2789                 [BTTV_BOARD_VD012] = {
2790                 /* D.Heer@Phytec.de */
2791                 .name           = "PHYTEC VD-012 (bt878)",
2792                 .video_inputs   = 4,
2793                 /* .audio_inputs= 0, */
2794                 .svhs           = NO_SVHS,
2795                 .gpiomask       = 0x00,
2796                 .muxsel         = MUXSEL(0, 2, 3, 1),
2797                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2798                 .needs_tvaudio  = 0,
2799                 .pll            = PLL_28,
2800                 .tuner_type     = TUNER_ABSENT,
2801                 .tuner_addr     = ADDR_UNSET,
2802         },
2803                 [BTTV_BOARD_VD012_X1] = {
2804                 /* D.Heer@Phytec.de */
2805                 .name           = "PHYTEC VD-012-X1 (bt878)",
2806                 .video_inputs   = 4,
2807                 /* .audio_inputs= 0, */
2808                 .svhs           = 3,
2809                 .gpiomask       = 0x00,
2810                 .muxsel         = MUXSEL(2, 3, 1),
2811                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2812                 .needs_tvaudio  = 0,
2813                 .pll            = PLL_28,
2814                 .tuner_type     = TUNER_ABSENT,
2815                 .tuner_addr     = ADDR_UNSET,
2816         },
2817                 [BTTV_BOARD_VD012_X2] = {
2818                 /* D.Heer@Phytec.de */
2819                 .name           = "PHYTEC VD-012-X2 (bt878)",
2820                 .video_inputs   = 4,
2821                 /* .audio_inputs= 0, */
2822                 .svhs           = 3,
2823                 .gpiomask       = 0x00,
2824                 .muxsel         = MUXSEL(3, 2, 1),
2825                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2826                 .needs_tvaudio  = 0,
2827                 .pll            = PLL_28,
2828                 .tuner_type     = TUNER_ABSENT,
2829                 .tuner_addr     = ADDR_UNSET,
2830         },
2831                 [BTTV_BOARD_GEOVISION_GV800S] = {
2832                 /* Bruno Christo <bchristo@inf.ufsm.br>
2833                  *
2834                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2835                  *      1 audio input  per BT878A = 4 audio inputs
2836                  *      4 video inputs per BT878A = 16 video inputs
2837                  * This is the first BT878A chip of the GV-800(S). It's the
2838                  * "master" chip and it controls the video inputs through an
2839                  * analog multiplexer (a CD22M3494) via some GPIO pins. The
2840                  * slaves should use card type 0x9e (following this one).
2841                  * There is a EEPROM on the card which is currently not handled.
2842                  * The audio input is not working yet.
2843                  */
2844                 .name           = "Geovision GV-800(S) (master)",
2845                 .video_inputs   = 4,
2846                 /* .audio_inputs= 1, */
2847                 .tuner_type     = TUNER_ABSENT,
2848                 .tuner_addr     = ADDR_UNSET,
2849                 .svhs           = NO_SVHS,
2850                 .gpiomask       = 0xf107f,
2851                 .no_gpioirq     = 1,
2852                 .muxsel         = MUXSEL(2, 2, 2, 2),
2853                 .pll            = PLL_28,
2854                 .no_msp34xx     = 1,
2855                 .no_tda7432     = 1,
2856                 .no_tda9875     = 1,
2857                 .muxsel_hook    = gv800s_muxsel,
2858         },
2859                 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2860                 /* Bruno Christo <bchristo@inf.ufsm.br>
2861                  *
2862                  * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2863                  *      1 audio input  per BT878A = 4 audio inputs
2864                  *      4 video inputs per BT878A = 16 video inputs
2865                  * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2866                  * and should use this card type.
2867                  * The audio input is not working yet.
2868                  */
2869                 .name           = "Geovision GV-800(S) (slave)",
2870                 .video_inputs   = 4,
2871                 /* .audio_inputs= 1, */
2872                 .tuner_type     = TUNER_ABSENT,
2873                 .tuner_addr     = ADDR_UNSET,
2874                 .svhs           = NO_SVHS,
2875                 .gpiomask       = 0x00,
2876                 .no_gpioirq     = 1,
2877                 .muxsel         = MUXSEL(2, 2, 2, 2),
2878                 .pll            = PLL_28,
2879                 .no_msp34xx     = 1,
2880                 .no_tda7432     = 1,
2881                 .no_tda9875     = 1,
2882                 .muxsel_hook    = gv800s_muxsel,
2883         },
2884 };
2885
2886 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2887
2888 /* ----------------------------------------------------------------------- */
2889
2890 static unsigned char eeprom_data[256];
2891
2892 /*
2893  * identify card
2894  */
2895 void __devinit bttv_idcard(struct bttv *btv)
2896 {
2897         unsigned int gpiobits;
2898         int i,type;
2899         unsigned short tmp;
2900
2901         /* read PCI subsystem ID */
2902         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2903         btv->cardid = tmp << 16;
2904         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2905         btv->cardid |= tmp;
2906
2907         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2908                 /* look for the card */
2909                 for (type = -1, i = 0; cards[i].id != 0; i++)
2910                         if (cards[i].id  == btv->cardid)
2911                                 type = i;
2912
2913                 if (type != -1) {
2914                         /* found it */
2915                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2916                                "PCI subsystem ID is %04x:%04x\n",
2917                                btv->c.nr,cards[type].name,cards[type].cardnr,
2918                                btv->cardid & 0xffff,
2919                                (btv->cardid >> 16) & 0xffff);
2920                         btv->c.type = cards[type].cardnr;
2921                 } else {
2922                         /* 404 */
2923                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2924                                btv->c.nr, btv->cardid & 0xffff,
2925                                (btv->cardid >> 16) & 0xffff);
2926                         printk(KERN_DEBUG "please mail id, board name and "
2927                                "the correct card= insmod option to linux-media@vger.kernel.org\n");
2928                 }
2929         }
2930
2931         /* let the user override the autodetected type */
2932         if (card[btv->c.nr] < bttv_num_tvcards)
2933                 btv->c.type=card[btv->c.nr];
2934
2935         /* print which card config we are using */
2936         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2937                bttv_tvcards[btv->c.type].name, btv->c.type,
2938                card[btv->c.nr] < bttv_num_tvcards
2939                ? "insmod option" : "autodetected");
2940
2941         /* overwrite gpio stuff ?? */
2942         if (UNSET == audioall && UNSET == audiomux[0])
2943                 return;
2944
2945         if (UNSET != audiomux[0]) {
2946                 gpiobits = 0;
2947                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2948                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2949                         gpiobits |= audiomux[i];
2950                 }
2951         } else {
2952                 gpiobits = audioall;
2953                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2955                 }
2956         }
2957         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2958         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2959                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2960         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2961                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2962         }
2963         printk("\n");
2964 }
2965
2966 /*
2967  * (most) board specific initialisations goes here
2968  */
2969
2970 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2971 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2972 {
2973         int type = -1;
2974
2975         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2976                 type = BTTV_BOARD_MODTEC_205;
2977         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2978                 type = BTTV_BOARD_EURESYS_PICOLO;
2979         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2980                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2981
2982         if (-1 != type) {
2983                 btv->c.type = type;
2984                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2985                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2986         }
2987 }
2988
2989 static void flyvideo_gpio(struct bttv *btv)
2990 {
2991         int gpio, has_remote, has_radio, is_capture_only;
2992         int is_lr90, has_tda9820_tda9821;
2993         int tuner_type = UNSET, ttype;
2994
2995         gpio_inout(0xffffff, 0);
2996         udelay(8);  /* without this we would see the 0x1800 mask */
2997         gpio = gpio_read();
2998         /* FIXME: must restore OUR_EN ??? */
2999
3000         /* all cards provide GPIO info, some have an additional eeprom
3001          * LR50: GPIO coding can be found lower right CP1 .. CP9
3002          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3003          *       GPIO14-12: n.c.
3004          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3005
3006          * lowest 3 bytes are remote control codes (no handshake needed)
3007          * xxxFFF: No remote control chip soldered
3008          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3009          * Note: Some bits are Audio_Mask !
3010          */
3011         ttype = (gpio & 0x0f0000) >> 16;
3012         switch (ttype) {
3013         case 0x0:
3014                 tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3015                 break;
3016         case 0x2:
3017                 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3018                 break;
3019         case 0x4:
3020                 tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3021                 break;
3022         case 0x6:
3023                 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3024                 break;
3025         case 0xC:
3026                 tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3027                 break;
3028         default:
3029                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3030                 break;
3031         }
3032
3033         has_remote          =   gpio & 0x800000;
3034         has_radio           =   gpio & 0x400000;
3035         /*   unknown                   0x200000;
3036          *   unknown2                  0x100000; */
3037         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3038         has_tda9820_tda9821 = !(gpio & 0x004000);
3039         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3040         /*
3041          * gpio & 0x001000    output bit for audio routing */
3042
3043         if (is_capture_only)
3044                 tuner_type = TUNER_ABSENT; /* No tuner present */
3045
3046         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3047                 btv->c.nr, has_radio ? "yes" : "no ",
3048                 has_remote ? "yes" : "no ", tuner_type, gpio);
3049         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3050                 btv->c.nr, is_lr90 ? "yes" : "no ",
3051                 has_tda9820_tda9821 ? "yes" : "no ",
3052                 is_capture_only ? "yes" : "no ");
3053
3054         if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3055                 btv->tuner_type = tuner_type;
3056         btv->has_radio = has_radio;
3057
3058         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3059          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3060          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3061         if (has_tda9820_tda9821)
3062                 btv->audio_mode_gpio = lt9415_audio;
3063         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3064 }
3065
3066 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3067                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3068 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3069                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3070
3071 static void miro_pinnacle_gpio(struct bttv *btv)
3072 {
3073         int id,msp,gpio;
3074         char *info;
3075
3076         gpio_inout(0xffffff, 0);
3077         gpio = gpio_read();
3078         id   = ((gpio>>10) & 63) -1;
3079         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3080         if (id < 32) {
3081                 btv->tuner_type = miro_tunermap[id];
3082                 if (0 == (gpio & 0x20)) {
3083                         btv->has_radio = 1;
3084                         if (!miro_fmtuner[id]) {
3085                                 btv->has_matchbox = 1;
3086                                 btv->mbox_we    = (1<<6);
3087                                 btv->mbox_most  = (1<<7);
3088                                 btv->mbox_clk   = (1<<8);
3089                                 btv->mbox_data  = (1<<9);
3090                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3091                         }
3092                 } else {
3093                         btv->has_radio = 0;
3094                 }
3095                 if (-1 != msp) {
3096                         if (btv->c.type == BTTV_BOARD_MIRO)
3097                                 btv->c.type = BTTV_BOARD_MIROPRO;
3098                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3099                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3100                 }
3101                 printk(KERN_INFO
3102                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3103                        btv->c.nr, id+1, btv->tuner_type,
3104                        !btv->has_radio ? "no" :
3105                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3106                        (-1 == msp) ? "no" : "yes");
3107         } else {
3108                 /* new cards with microtune tuner */
3109                 id = 63 - id;
3110                 btv->has_radio = 0;
3111                 switch (id) {
3112                 case 1:
3113                         info = "PAL / mono";
3114                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3115                         break;
3116                 case 2:
3117                         info = "PAL+SECAM / stereo";
3118                         btv->has_radio = 1;
3119                         btv->tda9887_conf = TDA9887_QSS;
3120                         break;
3121                 case 3:
3122                         info = "NTSC / stereo";
3123                         btv->has_radio = 1;
3124                         btv->tda9887_conf = TDA9887_QSS;
3125                         break;
3126                 case 4:
3127                         info = "PAL+SECAM / mono";
3128                         btv->tda9887_conf = TDA9887_QSS;
3129                         break;
3130                 case 5:
3131                         info = "NTSC / mono";
3132                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3133                         break;
3134                 case 6:
3135                         info = "NTSC / stereo";
3136                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3137                         break;
3138                 case 7:
3139                         info = "PAL / stereo";
3140                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3141                         break;
3142                 default:
3143                         info = "oops: unknown card";
3144                         break;
3145                 }
3146                 if (-1 != msp)
3147                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3148                 printk(KERN_INFO
3149                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3150                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3151                 btv->tuner_type = TUNER_MT2032;
3152         }
3153 }
3154
3155 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3156 #define LM1882_SYNC_DRIVE     0x200000L
3157
3158 static void init_ids_eagle(struct bttv *btv)
3159 {
3160         gpio_inout(0xffffff,0xFFFF37);
3161         gpio_write(0x200020);
3162
3163         /* flash strobe inverter ?! */
3164         gpio_write(0x200024);
3165
3166         /* switch sync drive off */
3167         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3168
3169         /* set BT848 muxel to 2 */
3170         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3171 }
3172
3173 /* Muxsel helper for the IDS Eagle.
3174  * the eagles does not use the standard muxsel-bits but
3175  * has its own multiplexer */
3176 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3177 {
3178         gpio_bits(3, input & 3);
3179
3180         /* composite */
3181         /* set chroma ADC to sleep */
3182         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3183         /* set to composite video */
3184         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3185         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3186
3187         /* switch sync drive off */
3188         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3189 }
3190
3191 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3192 {
3193         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3194         gpio_write(masks[input%4]);
3195 }
3196
3197 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3198    alarms output
3199
3200    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3201    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3202
3203    IN - sensor inputs, INx - sensor inputs and TI XORed together
3204    O1,O2,O3 - alarm outputs (relays)
3205
3206    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3207
3208 */
3209
3210 static void init_lmlbt4x(struct bttv *btv)
3211 {
3212         printk(KERN_DEBUG "LMLBT4x init\n");
3213         btwrite(0x000000, BT848_GPIO_REG_INP);
3214         gpio_inout(0xffffff, 0x0006C0);
3215         gpio_write(0x000000);
3216 }
3217
3218 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3219 {
3220         unsigned int inmux = input % 8;
3221         gpio_inout( 0xf, 0xf );
3222         gpio_bits( 0xf, inmux );
3223 }
3224
3225 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3226 {
3227         unsigned int inmux = input % 4;
3228         gpio_inout( 3<<9, 3<<9 );
3229         gpio_bits( 3<<9, inmux<<9 );
3230 }
3231
3232 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3233 {
3234         unsigned int inmux = input % 16;
3235         gpio_inout(0xf, 0xf);
3236         gpio_bits(0xf, inmux);
3237 }
3238
3239 /* ----------------------------------------------------------------------- */
3240
3241 static void bttv_reset_audio(struct bttv *btv)
3242 {
3243         /*
3244          * BT878A has a audio-reset register.
3245          * 1. This register is an audio reset function but it is in
3246          *    function-0 (video capture) address space.
3247          * 2. It is enough to do this once per power-up of the card.
3248          * 3. There is a typo in the Conexant doc -- it is not at
3249          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3250          * --//Shrikumar 030609
3251          */
3252         if (btv->id != 878)
3253                 return;
3254
3255         if (bttv_debug)
3256                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3257         btwrite((1<<7), 0x058);
3258         udelay(10);
3259         btwrite(     0, 0x058);
3260 }
3261
3262 /* initialization part one -- before registering i2c bus */
3263 void __devinit bttv_init_card1(struct bttv *btv)
3264 {
3265         switch (btv->c.type) {
3266         case BTTV_BOARD_HAUPPAUGE:
3267         case BTTV_BOARD_HAUPPAUGE878:
3268                 boot_msp34xx(btv,5);
3269                 break;
3270         case BTTV_BOARD_VOODOOTV_200:
3271         case BTTV_BOARD_VOODOOTV_FM:
3272                 boot_msp34xx(btv,20);
3273                 break;
3274         case BTTV_BOARD_AVERMEDIA98:
3275                 boot_msp34xx(btv,11);
3276                 break;
3277         case BTTV_BOARD_HAUPPAUGEPVR:
3278                 pvr_boot(btv);
3279                 break;
3280         case BTTV_BOARD_TWINHAN_DST:
3281         case BTTV_BOARD_AVDVBT_771:
3282         case BTTV_BOARD_PINNACLESAT:
3283                 btv->use_i2c_hw = 1;
3284                 break;
3285         case BTTV_BOARD_ADLINK_RTV24:
3286                 init_RTV24( btv );
3287                 break;
3288
3289         }
3290         if (!bttv_tvcards[btv->c.type].has_dvb)
3291                 bttv_reset_audio(btv);
3292 }
3293
3294 /* initialization part two -- after registering i2c bus */
3295 void __devinit bttv_init_card2(struct bttv *btv)
3296 {
3297         int addr=ADDR_UNSET;
3298
3299         btv->tuner_type = UNSET;
3300
3301         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3302                 bttv_readee(btv,eeprom_data,0xa0);
3303                 identify_by_eeprom(btv,eeprom_data);
3304         }
3305
3306         switch (btv->c.type) {
3307         case BTTV_BOARD_MIRO:
3308         case BTTV_BOARD_MIROPRO:
3309         case BTTV_BOARD_PINNACLE:
3310         case BTTV_BOARD_PINNACLEPRO:
3311                 /* miro/pinnacle */
3312                 miro_pinnacle_gpio(btv);
3313                 break;
3314         case BTTV_BOARD_FLYVIDEO_98:
3315         case BTTV_BOARD_MAXI:
3316         case BTTV_BOARD_LIFE_FLYKIT:
3317         case BTTV_BOARD_FLYVIDEO:
3318         case BTTV_BOARD_TYPHOON_TVIEW:
3319         case BTTV_BOARD_CHRONOS_VS2:
3320         case BTTV_BOARD_FLYVIDEO_98FM:
3321         case BTTV_BOARD_FLYVIDEO2000:
3322         case BTTV_BOARD_FLYVIDEO98EZ:
3323         case BTTV_BOARD_CONFERENCETV:
3324         case BTTV_BOARD_LIFETEC_9415:
3325                 flyvideo_gpio(btv);
3326                 break;
3327         case BTTV_BOARD_HAUPPAUGE:
3328         case BTTV_BOARD_HAUPPAUGE878:
3329         case BTTV_BOARD_HAUPPAUGEPVR:
3330                 /* pick up some config infos from the eeprom */
3331                 bttv_readee(btv,eeprom_data,0xa0);
3332                 hauppauge_eeprom(btv);
3333                 break;
3334         case BTTV_BOARD_AVERMEDIA98:
3335         case BTTV_BOARD_AVPHONE98:
3336                 bttv_readee(btv,eeprom_data,0xa0);
3337                 avermedia_eeprom(btv);
3338                 break;
3339         case BTTV_BOARD_PXC200:
3340                 init_PXC200(btv);
3341                 break;
3342         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3343                 picolo_tetra_init(btv);
3344                 break;
3345         case BTTV_BOARD_VHX:
3346                 btv->has_radio    = 1;
3347                 btv->has_matchbox = 1;
3348                 btv->mbox_we      = 0x20;
3349                 btv->mbox_most    = 0;
3350                 btv->mbox_clk     = 0x08;
3351                 btv->mbox_data    = 0x10;
3352                 btv->mbox_mask    = 0x38;
3353                 break;
3354         case BTTV_BOARD_VOBIS_BOOSTAR:
3355         case BTTV_BOARD_TERRATV:
3356                 terratec_active_radio_upgrade(btv);
3357                 break;
3358         case BTTV_BOARD_MAGICTVIEW061:
3359                 if (btv->cardid == 0x3002144f) {
3360                         btv->has_radio=1;
3361                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3362                 }
3363                 break;
3364         case BTTV_BOARD_STB2:
3365                 if (btv->cardid == 0x3060121a) {
3366                         /* Fix up entry for 3DFX VoodooTV 100,
3367                            which is an OEM STB card variant. */
3368                         btv->has_radio=0;
3369                         btv->tuner_type=TUNER_TEMIC_NTSC;
3370                 }
3371                 break;
3372         case BTTV_BOARD_OSPREY1x0:
3373         case BTTV_BOARD_OSPREY1x0_848:
3374         case BTTV_BOARD_OSPREY101_848:
3375         case BTTV_BOARD_OSPREY1x1:
3376         case BTTV_BOARD_OSPREY1x1_SVID:
3377         case BTTV_BOARD_OSPREY2xx:
3378         case BTTV_BOARD_OSPREY2x0_SVID:
3379         case BTTV_BOARD_OSPREY2x0:
3380         case BTTV_BOARD_OSPREY440:
3381         case BTTV_BOARD_OSPREY500:
3382         case BTTV_BOARD_OSPREY540:
3383         case BTTV_BOARD_OSPREY2000:
3384                 bttv_readee(btv,eeprom_data,0xa0);
3385                 osprey_eeprom(btv, eeprom_data);
3386                 break;
3387         case BTTV_BOARD_IDS_EAGLE:
3388                 init_ids_eagle(btv);
3389                 break;
3390         case BTTV_BOARD_MODTEC_205:
3391                 bttv_readee(btv,eeprom_data,0xa0);
3392                 modtec_eeprom(btv);
3393                 break;
3394         case BTTV_BOARD_LMLBT4:
3395                 init_lmlbt4x(btv);
3396                 break;
3397         case BTTV_BOARD_TIBET_CS16:
3398                 tibetCS16_init(btv);
3399                 break;
3400         case BTTV_BOARD_KODICOM_4400R:
3401                 kodicom4400r_init(btv);
3402                 break;
3403         case BTTV_BOARD_GEOVISION_GV800S:
3404                 gv800s_init(btv);
3405                 break;
3406         }
3407
3408         /* pll configuration */
3409         if (!(btv->id==848 && btv->revision==0x11)) {
3410                 /* defaults from card list */
3411                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3412                         btv->pll.pll_ifreq=28636363;
3413                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3414                 }
3415                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3416                         btv->pll.pll_ifreq=35468950;
3417                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3418                 }
3419                 /* insmod options can override */
3420                 switch (pll[btv->c.nr]) {
3421                 case 0: /* none */
3422                         btv->pll.pll_crystal = 0;
3423                         btv->pll.pll_ifreq   = 0;
3424                         btv->pll.pll_ofreq   = 0;
3425                         break;
3426                 case 1: /* 28 MHz */
3427                 case 28:
3428                         btv->pll.pll_ifreq   = 28636363;
3429                         btv->pll.pll_ofreq   = 0;
3430                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3431                         break;
3432                 case 2: /* 35 MHz */
3433                 case 35:
3434                         btv->pll.pll_ifreq   = 35468950;
3435                         btv->pll.pll_ofreq   = 0;
3436                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3437                         break;
3438                 }
3439         }
3440         btv->pll.pll_current = -1;
3441
3442         /* tuner configuration (from card list / autodetect / insmod option) */
3443         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3444                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3445
3446         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3447                 if (UNSET == btv->tuner_type)
3448                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3449         if (UNSET != tuner[btv->c.nr])
3450                 btv->tuner_type = tuner[btv->c.nr];
3451
3452         if (btv->tuner_type == TUNER_ABSENT)
3453                 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3454         else if(btv->tuner_type == UNSET)
3455                 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3456         else
3457                 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3458                        btv->tuner_type);
3459
3460         if (UNSET == btv->tuner_type)
3461                 btv->tuner_type = TUNER_ABSENT;
3462
3463         if (btv->tuner_type != TUNER_ABSENT) {
3464                 struct tuner_setup tun_setup;
3465
3466                 /* Load tuner module before issuing tuner config call! */
3467                 if (autoload)
3468                         request_module("tuner");
3469
3470                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3471                 tun_setup.type = btv->tuner_type;
3472                 tun_setup.addr = addr;
3473
3474                 if (bttv_tvcards[btv->c.type].has_radio)
3475                         tun_setup.mode_mask |= T_RADIO;
3476
3477                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3478         }
3479
3480         if (btv->tda9887_conf) {
3481                 struct v4l2_priv_tun_config tda9887_cfg;
3482
3483                 tda9887_cfg.tuner = TUNER_TDA9887;
3484                 tda9887_cfg.priv = &btv->tda9887_conf;
3485
3486                 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3487         }
3488
3489         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3490                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3491         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3492                     UNSET : bttv_tvcards[btv->c.type].svhs;
3493         if (svhs[btv->c.nr] != UNSET)
3494                 btv->svhs = svhs[btv->c.nr];
3495         if (remote[btv->c.nr] != UNSET)
3496                 btv->has_remote = remote[btv->c.nr];
3497
3498         if (bttv_tvcards[btv->c.type].has_radio)
3499                 btv->has_radio=1;
3500         if (bttv_tvcards[btv->c.type].has_remote)
3501                 btv->has_remote=1;
3502         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3503                 btv->gpioirq=1;
3504         if (bttv_tvcards[btv->c.type].volume_gpio)
3505                 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3506         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3507                 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3508
3509         if (!autoload)
3510                 return;
3511
3512         if (btv->tuner_type == TUNER_ABSENT)
3513                 return;  /* no tuner or related drivers to load */
3514
3515         /* try to detect audio/fader chips */
3516         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3517             bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3518                 request_module("msp3400");
3519
3520         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3521             bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3522                 request_module("msp3400");
3523
3524         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3525             bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3526                 request_module("tda9875");
3527
3528         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3529             bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3530                 request_module("tda7432");
3531
3532         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3533                 request_module("tvaudio");
3534 }
3535
3536
3537 /* ----------------------------------------------------------------------- */
3538
3539 static void modtec_eeprom(struct bttv *btv)
3540 {
3541         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3542                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3543                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3544                        btv->c.nr,&eeprom_data[0x1e]);
3545         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3546                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3547                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3548                        btv->c.nr,&eeprom_data[0x1e]);
3549         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3550                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3551                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3552                        btv->c.nr,&eeprom_data[0x1e]);
3553         } else {
3554                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3555                        btv->c.nr,&eeprom_data[0x1e]);
3556         }
3557 }
3558
3559 static void __devinit hauppauge_eeprom(struct bttv *btv)
3560 {
3561         struct tveeprom tv;
3562
3563         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3564         btv->tuner_type = tv.tuner_type;
3565         btv->has_radio  = tv.has_radio;
3566
3567         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3568                 btv->c.nr, tv.model);
3569
3570         /*
3571          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3572          * type based on model #.
3573          */
3574         if(tv.model == 64900) {
3575                 printk("bttv%d: Switching board type from %s to %s\n",
3576                         btv->c.nr,
3577                         bttv_tvcards[btv->c.type].name,
3578                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3579                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3580         }
3581 }
3582
3583 static int terratec_active_radio_upgrade(struct bttv *btv)
3584 {
3585         int freq;
3586
3587         btv->has_radio    = 1;
3588         btv->has_matchbox = 1;
3589         btv->mbox_we      = 0x10;
3590         btv->mbox_most    = 0x20;
3591         btv->mbox_clk     = 0x08;
3592         btv->mbox_data    = 0x04;
3593         btv->mbox_mask    = 0x3c;
3594
3595         btv->mbox_iow     = 1 <<  8;
3596         btv->mbox_ior     = 1 <<  9;
3597         btv->mbox_csel    = 1 << 10;
3598
3599         freq=88000/62.5;
3600         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3601         if (0x1ed8 == tea5757_read(btv)) {
3602                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3603                        btv->c.nr);
3604                 btv->has_radio    = 1;
3605                 btv->has_matchbox = 1;
3606         } else {
3607                 btv->has_radio    = 0;
3608                 btv->has_matchbox = 0;
3609         }
3610         return 0;
3611 }
3612
3613
3614 /* ----------------------------------------------------------------------- */
3615
3616 /*
3617  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3618  *
3619  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3620  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3621  * unpacked with unzip).
3622  */
3623 #define PVR_GPIO_DELAY          10
3624
3625 #define BTTV_ALT_DATA           0x000001
3626 #define BTTV_ALT_DCLK           0x100000
3627 #define BTTV_ALT_NCONFIG        0x800000
3628
3629 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3630                                      u32 microlen)
3631 {
3632         u32 n;
3633         u8 bits;
3634         int i;
3635
3636         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3637         gpio_write(0);
3638         udelay(PVR_GPIO_DELAY);
3639
3640         gpio_write(BTTV_ALT_NCONFIG);
3641         udelay(PVR_GPIO_DELAY);
3642
3643         for (n = 0; n < microlen; n++) {
3644                 bits = micro[n];
3645                 for (i = 0 ; i < 8 ; i++) {
3646                         gpio_bits(BTTV_ALT_DCLK,0);
3647                         if (bits & 0x01)
3648                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3649                         else
3650                                 gpio_bits(BTTV_ALT_DATA,0);
3651                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3652                         bits >>= 1;
3653                 }
3654         }
3655         gpio_bits(BTTV_ALT_DCLK,0);
3656         udelay(PVR_GPIO_DELAY);
3657
3658         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3659         for (i = 0 ; i < 30 ; i++) {
3660                 gpio_bits(BTTV_ALT_DCLK,0);
3661                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3662         }
3663         gpio_bits(BTTV_ALT_DCLK,0);
3664         return 0;
3665 }
3666
3667 static int __devinit pvr_boot(struct bttv *btv)
3668 {
3669         const struct firmware *fw_entry;
3670         int rc;
3671
3672         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3673         if (rc != 0) {
3674                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3675                        btv->c.nr);
3676                 return rc;
3677         }
3678         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3679         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3680                btv->c.nr, (rc < 0) ? "failed" : "ok");
3681         release_firmware(fw_entry);
3682         return rc;
3683 }
3684
3685 /* ----------------------------------------------------------------------- */
3686 /* some osprey specific stuff                                              */
3687
3688 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3689 {
3690         int i;
3691         u32 serial = 0;
3692         int cardid = -1;
3693
3694         /* This code will nevery actually get called in this case.... */
3695         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3696                 /* this might be an antique... check for MMAC label in eeprom */
3697                 if (!strncmp(ee, "MMAC", 4)) {
3698                         u8 checksum = 0;
3699                         for (i = 0; i < 21; i++)
3700                                 checksum += ee[i];
3701                         if (checksum != ee[21])
3702                                 return;
3703                         cardid = BTTV_BOARD_OSPREY1x0_848;
3704                         for (i = 12; i < 21; i++)
3705                                 serial *= 10, serial += ee[i] - '0';
3706                 }
3707         } else {
3708                 unsigned short type;
3709
3710                 for (i = 4*16; i < 8*16; i += 16) {
3711                         u16 checksum = ip_compute_csum(ee + i, 16);
3712
3713                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3714                                 break;
3715                 }
3716                 if (i >= 8*16)
3717                         return;
3718                 ee += i;
3719
3720                 /* found a valid descriptor */
3721                 type = get_unaligned_be16((__be16 *)(ee+4));
3722
3723                 switch(type) {
3724                 /* 848 based */
3725                 case 0x0004:
3726                         cardid = BTTV_BOARD_OSPREY1x0_848;
3727                         break;
3728                 case 0x0005:
3729                         cardid = BTTV_BOARD_OSPREY101_848;
3730                         break;
3731
3732                 /* 878 based */
3733                 case 0x0012:
3734                 case 0x0013:
3735                         cardid = BTTV_BOARD_OSPREY1x0;
3736                         break;
3737                 case 0x0014:
3738                 case 0x0015:
3739                         cardid = BTTV_BOARD_OSPREY1x1;
3740                         break;
3741                 case 0x0016:
3742                 case 0x0017:
3743                 case 0x0020:
3744                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3745                         break;
3746                 case 0x0018:
3747                 case 0x0019:
3748                 case 0x001E:
3749                 case 0x001F:
3750                         cardid = BTTV_BOARD_OSPREY2xx;
3751                         break;
3752                 case 0x001A:
3753                 case 0x001B:
3754                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3755                         break;
3756                 case 0x0040:
3757                         cardid = BTTV_BOARD_OSPREY500;
3758                         break;
3759                 case 0x0050:
3760                 case 0x0056:
3761                         cardid = BTTV_BOARD_OSPREY540;
3762                         /* bttv_osprey_540_init(btv); */
3763                         break;
3764                 case 0x0060:
3765                 case 0x0070:
3766                 case 0x00A0:
3767                         cardid = BTTV_BOARD_OSPREY2x0;
3768                         /* enable output on select control lines */
3769                         gpio_inout(0xffffff,0x000303);
3770                         break;
3771                 case 0x00D8:
3772                         cardid = BTTV_BOARD_OSPREY440;
3773                         break;
3774                 default:
3775                         /* unknown...leave generic, but get serial # */
3776                         printk(KERN_INFO "bttv%d: "
3777                                "osprey eeprom: unknown card type 0x%04x\n",
3778                                btv->c.nr, type);
3779                         break;
3780                 }
3781                 serial = get_unaligned_be32((__be32 *)(ee+6));
3782         }
3783
3784         printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3785                btv->c.nr, cardid,
3786                cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3787
3788         if (cardid<0 || btv->c.type == cardid)
3789                 return;
3790
3791         /* card type isn't set correctly */
3792         if (card[btv->c.nr] < bttv_num_tvcards) {
3793                 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3794                        "Not overriding user specified card type\n", btv->c.nr);
3795         } else {
3796                 printk(KERN_INFO "bttv%d: osprey eeprom: "
3797                        "Changing card type from %d to %d\n", btv->c.nr,
3798                        btv->c.type, cardid);
3799                 btv->c.type = cardid;
3800         }
3801 }
3802
3803 /* ----------------------------------------------------------------------- */
3804 /* AVermedia specific stuff, from  bktr_card.c                             */
3805
3806 static int tuner_0_table[] = {
3807         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3808         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3809         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3810         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3811         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3812         TUNER_PHILIPS_FM1216ME_MK3 };
3813
3814 static int tuner_1_table[] = {
3815         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3816         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3817         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3818         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3819         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3820
3821 static void __devinit avermedia_eeprom(struct bttv *btv)
3822 {
3823         int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3824
3825         tuner_make      = (eeprom_data[0x41] & 0x7);
3826         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3827         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3828         btv->has_remote = (eeprom_data[0x42] & 0x01);
3829
3830         if (tuner_make == 0 || tuner_make == 2)
3831                 if (tuner_format <= 0x0a)
3832                         tuner_type = tuner_0_table[tuner_format];
3833         if (tuner_make == 1)
3834                 if (tuner_format <= 9)
3835                         tuner_type = tuner_1_table[tuner_format];
3836
3837         if (tuner_make == 4)
3838                 if (tuner_format == 0x09)
3839                         tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3840
3841         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3842                 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3843         if (tuner_type) {
3844                 btv->tuner_type = tuner_type;
3845                 printk(KERN_CONT "%d", tuner_type);
3846         } else
3847                 printk(KERN_CONT "Unknown type");
3848         printk(KERN_CONT " radio:%s remote control:%s\n",
3849                tuner_tv_fm     ? "yes" : "no",
3850                btv->has_remote ? "yes" : "no");
3851 }
3852
3853 /*
3854  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
3855  * analog demod, which is not I2C controlled like the newer and more common
3856  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
3857  * that control the IF for the video and audio.  Apparently, bttv GPIO
3858  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3859  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3860  */
3861 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3862 {
3863
3864         if (btv->audio == TVAUDIO_INPUT_TUNER) {
3865                 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3866                         gpiobits |= 0x10000;
3867                 else
3868                         gpiobits &= ~0x10000;
3869         }
3870
3871         gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3872         return gpiobits;
3873 }
3874
3875
3876 /*
3877  * reset/enable the MSP on some Hauppauge cards
3878  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3879  *
3880  * Hauppauge:  pin  5
3881  * Voodoo:     pin 20
3882  */
3883 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3884 {
3885         int mask = (1 << pin);
3886
3887         gpio_inout(mask,mask);
3888         gpio_bits(mask,0);
3889         mdelay(2);
3890         udelay(500);
3891         gpio_bits(mask,mask);
3892
3893         if (bttv_gpio)
3894                 bttv_gpio_tracking(btv,"msp34xx");
3895         if (bttv_verbose)
3896                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3897                        "init [%d]\n", btv->c.nr, pin);
3898 }
3899
3900 /* ----------------------------------------------------------------------- */
3901 /*  Imagenation L-Model PXC200 Framegrabber */
3902 /*  This is basically the same procedure as
3903  *  used by Alessandro Rubini in his pxc200
3904  *  driver, but using BTTV functions */
3905
3906 static void __devinit init_PXC200(struct bttv *btv)
3907 {
3908         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3909                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3910                                             0x00 };
3911         unsigned int i;
3912         int tmp;
3913         u32 val;
3914
3915         /* Initialise GPIO-connevted stuff */
3916         gpio_inout(0xffffff, (1<<13));
3917         gpio_write(0);
3918         udelay(3);
3919         gpio_write(1<<13);
3920         /* GPIO inputs are pulled up, so no need to drive
3921          * reset pin any longer */
3922         gpio_bits(0xffffff, 0);
3923         if (bttv_gpio)
3924                 bttv_gpio_tracking(btv,"pxc200");
3925
3926         /*  we could/should try and reset/control the AD pots? but
3927             right now  we simply  turned off the crushing.  Without
3928             this the AGC drifts drifts
3929             remember the EN is reverse logic -->
3930             setting BT848_ADC_AGC_EN disable the AGC
3931             tboult@eecs.lehigh.edu
3932         */
3933
3934         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3935
3936         /*      Initialise MAX517 DAC */
3937         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3938         bttv_I2CWrite(btv,0x5E,0,0x80,1);
3939
3940         /*      Initialise 12C508 PIC */
3941         /*      The I2CWrite and I2CRead commmands are actually to the
3942          *      same chips - but the R/W bit is included in the address
3943          *      argument so the numbers are different */
3944
3945
3946         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3947
3948         /* First of all, enable the clock line. This is used in the PXC200-F */
3949         val = btread(BT848_GPIO_DMA_CTL);
3950         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3951         btwrite(val, BT848_GPIO_DMA_CTL);
3952
3953         /* Then, push to 0 the reset pin long enough to reset the *
3954          * device same as above for the reset line, but not the same
3955          * value sent to the GPIO-connected stuff
3956          * which one is the good one? */
3957         gpio_inout(0xffffff,(1<<2));
3958         gpio_write(0);
3959         udelay(10);
3960         gpio_write(1<<2);
3961
3962         for (i = 0; i < ARRAY_SIZE(vals); i++) {
3963                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3964                 if (tmp != -1) {
3965                         printk(KERN_INFO
3966                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3967                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3968                 }
3969         }
3970
3971         printk(KERN_INFO "PXC200 Initialised.\n");
3972 }
3973
3974
3975
3976 /* ----------------------------------------------------------------------- */
3977 /*
3978  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3979  *  it. This apparently involves the following procedure for each 878 chip:
3980  *
3981  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
3982  *
3983  *  2)  write to GPIO_DATA
3984  *      - 0x0E
3985  *      - sleep 1ms
3986  *      - 0x10 + 0x0E
3987  *      - sleep 10ms
3988  *      - 0x0E
3989  *     read from GPIO_DATA into buf (uint_32)
3990  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3991  *                 error. ERROR_CPLD_Check_Failed stop.
3992  *
3993  *  3) write to GPIO_DATA
3994  *      - write 0x4400 + 0x0E
3995  *      - sleep 10ms
3996  *      - write 0x4410 + 0x0E
3997  *      - sleep 1ms
3998  *      - write 0x0E
3999  *     read from GPIO_DATA into buf (uint_32)
4000  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4001  *                error. ERROR_CPLD_Check_Failed.
4002  */
4003 /* ----------------------------------------------------------------------- */
4004 static void
4005 init_RTV24 (struct bttv *btv)
4006 {
4007         uint32_t dataRead = 0;
4008         long watchdog_value = 0x0E;
4009
4010         printk (KERN_INFO
4011                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4012                 btv->c.nr);
4013
4014         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4015
4016         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4017         msleep (1);
4018         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4019         msleep (10);
4020         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4021
4022         dataRead = btread (BT848_GPIO_DATA);
4023
4024         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4025                 printk (KERN_INFO
4026                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4027                         btv->c.nr, dataRead);
4028         }
4029
4030         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4031         msleep (10);
4032         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4033         msleep (1);
4034         btwrite (watchdog_value, BT848_GPIO_DATA);
4035         msleep (1);
4036         dataRead = btread (BT848_GPIO_DATA);
4037
4038         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4039                 printk (KERN_INFO
4040                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4041                         btv->c.nr, dataRead);
4042
4043                 return;
4044         }
4045
4046         printk (KERN_INFO
4047                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4048 }
4049
4050
4051
4052 /* ----------------------------------------------------------------------- */
4053 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4054 /*
4055  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4056  * This code is placed under the terms of the GNU General Public License
4057  *
4058  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4059  */
4060
4061 static void bus_low(struct bttv *btv, int bit)
4062 {
4063         if (btv->mbox_ior) {
4064                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4065                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4066                 udelay(5);
4067         }
4068
4069         gpio_bits(bit,0);
4070         udelay(5);
4071
4072         if (btv->mbox_ior) {
4073                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4074                 udelay(5);
4075         }
4076 }
4077
4078 static void bus_high(struct bttv *btv, int bit)
4079 {
4080         if (btv->mbox_ior) {
4081                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4082                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4083                 udelay(5);
4084         }
4085
4086         gpio_bits(bit,bit);
4087         udelay(5);
4088
4089         if (btv->mbox_ior) {
4090                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4091                 udelay(5);
4092         }
4093 }
4094
4095 static int bus_in(struct bttv *btv, int bit)
4096 {
4097         if (btv->mbox_ior) {
4098                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4099                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4100                 udelay(5);
4101
4102                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4103                 udelay(5);
4104         }
4105         return gpio_read() & (bit);
4106 }
4107
4108 /* TEA5757 register bits */
4109 #define TEA_FREQ                0:14
4110 #define TEA_BUFFER              15:15
4111
4112 #define TEA_SIGNAL_STRENGTH     16:17
4113
4114 #define TEA_PORT1               18:18
4115 #define TEA_PORT0               19:19
4116
4117 #define TEA_BAND                20:21
4118 #define TEA_BAND_FM             0
4119 #define TEA_BAND_MW             1
4120 #define TEA_BAND_LW             2
4121 #define TEA_BAND_SW             3
4122
4123 #define TEA_MONO                22:22
4124 #define TEA_ALLOW_STEREO        0
4125 #define TEA_FORCE_MONO          1
4126
4127 #define TEA_SEARCH_DIRECTION    23:23
4128 #define TEA_SEARCH_DOWN         0
4129 #define TEA_SEARCH_UP           1
4130
4131 #define TEA_STATUS              24:24
4132 #define TEA_STATUS_TUNED        0
4133 #define TEA_STATUS_SEARCHING    1
4134
4135 /* Low-level stuff */
4136 static int tea5757_read(struct bttv *btv)
4137 {
4138         unsigned long timeout;
4139         int value = 0;
4140         int i;
4141
4142         /* better safe than sorry */
4143         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4144
4145         if (btv->mbox_ior) {
4146                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4147                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4148                 udelay(5);
4149         }
4150
4151         if (bttv_gpio)
4152                 bttv_gpio_tracking(btv,"tea5757 read");
4153
4154         bus_low(btv,btv->mbox_we);
4155         bus_low(btv,btv->mbox_clk);
4156
4157         udelay(10);
4158         timeout= jiffies + msecs_to_jiffies(1000);
4159
4160         /* wait for DATA line to go low; error if it doesn't */
4161         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4162                 schedule();
4163         if (bus_in(btv,btv->mbox_data)) {
4164                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4165                 return -1;
4166         }
4167
4168         dprintk("bttv%d: tea5757:",btv->c.nr);
4169         for (i = 0; i < 24; i++) {
4170                 udelay(5);
4171                 bus_high(btv,btv->mbox_clk);
4172                 udelay(5);
4173                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4174                 bus_low(btv,btv->mbox_clk);
4175                 value <<= 1;
4176                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4177                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4178         }
4179         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4180         return value;
4181 }
4182
4183 static int tea5757_write(struct bttv *btv, int value)
4184 {
4185         int i;
4186         int reg = value;
4187
4188         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4189
4190         if (btv->mbox_ior) {
4191                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4192                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4193                 udelay(5);
4194         }
4195         if (bttv_gpio)
4196                 bttv_gpio_tracking(btv,"tea5757 write");
4197
4198         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4199         bus_low(btv,btv->mbox_clk);
4200         bus_high(btv,btv->mbox_we);
4201         for (i = 0; i < 25; i++) {
4202                 if (reg & 0x1000000)
4203                         bus_high(btv,btv->mbox_data);
4204                 else
4205                         bus_low(btv,btv->mbox_data);
4206                 reg <<= 1;
4207                 bus_high(btv,btv->mbox_clk);
4208                 udelay(10);
4209                 bus_low(btv,btv->mbox_clk);
4210                 udelay(10);
4211         }
4212         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4213         return 0;
4214 }
4215
4216 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4217 {
4218         dprintk("tea5757_set_freq %d\n",freq);
4219         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4220 }
4221
4222 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4223  *
4224  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4225  * switch instead (CD22M3494E). This IC can have multiple active connections
4226  * between Xn (input) and Yn (output) pins. We need to clear any existing
4227  * connection prior to establish a new one, pulsing the STROBE pin.
4228  *
4229  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4230  * GPIO pins are wired as:
4231  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4232  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4233  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4234  *  GPIO[8]   -                  - P3[5] (microcontroller)
4235  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4236  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4237  *  GPINTR    -                  - P3[4] (microcontroller)
4238  *
4239  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4240  * configuration either directly (as we are doing) or using the microcontroller
4241  * which is also wired to I2C interface. I have no further info on the
4242  * microcontroller features, one would need to disassembly the firmware.
4243  * note: the vendor refused to give any information on this product, all
4244  *       that stuff was found using a multimeter! :)
4245  */
4246 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4247 {
4248         static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4249                                       0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4250
4251         gpio_bits(0x07f, muxgpio[input]);
4252
4253         /* reset all conections */
4254         gpio_bits(0x200,0x200);
4255         mdelay(1);
4256         gpio_bits(0x200,0x000);
4257         mdelay(1);
4258
4259         /* create a new connection */
4260         gpio_bits(0x480,0x480);
4261         mdelay(1);
4262         gpio_bits(0x480,0x080);
4263         mdelay(1);
4264 }
4265
4266 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4267  *
4268  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4269  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4270  * chips, ten eight input analog multiplexors, a not chip and a few
4271  * other components.
4272  *
4273  * 16 inputs on a secondary bracket are provided and can be selected
4274  * from each of the four capture chips.  Two of the eight input
4275  * multiplexors are used to select from any of the 16 input signals.
4276  *
4277  * Unsupported hardware capabilities:
4278  *  . A video output monitor on the secondary bracket can be selected from
4279  *    one of the 878A chips.
4280  *  . Another passthrough but I haven't spent any time investigating it.
4281  *  . Digital I/O (logic level connected to GPIO) is available from an
4282  *    onboard header.
4283  *
4284  * The on chip input mux should always be set to 2.
4285  * GPIO[16:19] - Video input selection
4286  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4287  * GPIO[?:?]   - Digital I/O.
4288  *
4289  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4290  * determined what function (if any) it provides.  With the microcontroller
4291  * and sync seperator chips a guess is that it might have to do with video
4292  * switching and maybe some digital I/O.
4293  */
4294 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4295 {
4296         /* video mux */
4297         gpio_bits(0x0f0000, input << 16);
4298 }
4299
4300 static void tibetCS16_init(struct bttv *btv)
4301 {
4302         /* enable gpio bits, mask obtained via btSpy */
4303         gpio_inout(0xffffff, 0x0f7fff);
4304         gpio_write(0x0f7fff);
4305 }
4306
4307 /*
4308  * The following routines for the Kodicom-4400r get a little mind-twisting.
4309  * There is a "master" controller and three "slave" controllers, together
4310  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4311  * The analog switch is controlled by the "master", but the detection order
4312  * of the four BT878A chips is in an order which I just don't understand.
4313  * The "master" is actually the second controller to be detected.  The
4314  * logic on the board uses logical numbers for the 4 controllers, but
4315  * those numbers are different from the detection sequence.  When working
4316  * with the analog switch, we need to "map" from the detection sequence
4317  * over to the board's logical controller number.  This mapping sequence
4318  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4319  * unit 3, the second (which is the master) is logical unit 0, etc.
4320  * We need to maintain the status of the analog switch (which of the 16
4321  * cameras is connected to which of the 4 controllers).  Rather than
4322  * add to the bttv structure for this, we use the data reserved for
4323  * the mbox (unused for this card type).
4324  */
4325
4326 /*
4327  * First a routine to set the analog switch, which controls which camera
4328  * is routed to which controller.  The switch comprises an X-address
4329  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4330  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4331  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4332  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4333  * specified address.  The idea is to set the address and data, then bring
4334  * STROBE high, and finally bring STROBE back to low.
4335  */
4336 static void kodicom4400r_write(struct bttv *btv,
4337                                unsigned char xaddr,
4338                                unsigned char yaddr,
4339                                unsigned char data) {
4340         unsigned int udata;
4341
4342         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4343         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4344         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4345         gpio_bits(0x1ff, udata);                /* strobe low */
4346 }
4347
4348 /*
4349  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4350  * use this routine.  The routine finds the "master" for the card, maps
4351  * the controller number from the detected position over to the logical
4352  * number, writes the appropriate data to the analog switch, and housekeeps
4353  * the local copy of the switch information.  The parameter 'input' is the
4354  * requested camera number (0 - 15).
4355  */
4356 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4357 {
4358         char *sw_status;
4359         int xaddr, yaddr;
4360         struct bttv *mctlr;
4361         static unsigned char map[4] = {3, 0, 2, 1};
4362
4363         mctlr = master[btv->c.nr];
4364         if (mctlr == NULL) {    /* ignore if master not yet detected */
4365                 return;
4366         }
4367         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4368         yaddr = map[yaddr];
4369         sw_status = (char *)(&mctlr->mbox_we);
4370         xaddr = input & 0xf;
4371         /* Check if the controller/camera pair has changed, else ignore */
4372         if (sw_status[yaddr] != xaddr)
4373         {
4374                 /* "open" the old switch, "close" the new one, save the new */
4375                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4376                 sw_status[yaddr] = xaddr;
4377                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4378         }
4379 }
4380
4381 /*
4382  * During initialisation, we need to reset the analog switch.  We
4383  * also preset the switch to map the 4 connectors on the card to the
4384  * *user's* (see above description of kodicom4400r_muxsel) channels
4385  * 0 through 3
4386  */
4387 static void kodicom4400r_init(struct bttv *btv)
4388 {
4389         char *sw_status = (char *)(&btv->mbox_we);
4390         int ix;
4391
4392         gpio_inout(0x0003ff, 0x0003ff);
4393         gpio_write(1 << 9);     /* reset MUX */
4394         gpio_write(0);
4395         /* Preset camera 0 to the 4 controllers */
4396         for (ix = 0; ix < 4; ix++) {
4397                 sw_status[ix] = ix;
4398                 kodicom4400r_write(btv, ix, ix, 1);
4399         }
4400         /*
4401          * Since this is the "master", we need to set up the
4402          * other three controller chips' pointers to this structure
4403          * for later use in the muxsel routine.
4404          */
4405         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4406             return;
4407         master[btv->c.nr-1] = btv;
4408         master[btv->c.nr]   = btv;
4409         master[btv->c.nr+1] = btv;
4410         master[btv->c.nr+2] = btv;
4411 }
4412
4413 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4414  * video multiplexers to provide up to 16 video inputs. These
4415  * multiplexers are controlled by the lower 8 GPIO pins of the
4416  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4417
4418  * xxx0 is pin xxx of multiplexer U5,
4419  * yyy1 is pin yyy of multiplexer U2
4420  */
4421 #define ENA0    0x01
4422 #define ENB0    0x02
4423 #define ENA1    0x04
4424 #define ENB1    0x08
4425
4426 #define IN10    0x10
4427 #define IN00    0x20
4428 #define IN11    0x40
4429 #define IN01    0x80
4430
4431 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4432 {
4433         static const int masks[] = {
4434                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4435                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4436                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4437                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4438         };
4439         gpio_write(masks[input%16]);
4440 }
4441 static void picolo_tetra_init(struct bttv *btv)
4442 {
4443         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4444         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4445         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4446 }
4447 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4448 {
4449
4450         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4451         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4452         /*GPIO[20]&GPIO[21] used to choose the right input*/
4453         btwrite (input<<20,BT848_GPIO_DATA);
4454
4455 }
4456
4457 /*
4458  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4459  *
4460  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4461  * swichers to provide 16 channels to MUX0. The TDA8540's have
4462  * 4 independent outputs and as such the IVC120G also has the
4463  * optional "Monitor Out" bus. This allows the card to be looking
4464  * at one input while the monitor is looking at another.
4465  *
4466  * Since I've couldn't be bothered figuring out how to add an
4467  * independant muxsel for the monitor bus, I've just set it to
4468  * whatever the card is looking at.
4469  *
4470  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4471  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4472  *
4473  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4474  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4475  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4476  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4477  *
4478  */
4479
4480 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4481 #define I2C_TDA8540        0x90
4482 #define I2C_TDA8540_ALT1   0x92
4483 #define I2C_TDA8540_ALT2   0x94
4484 #define I2C_TDA8540_ALT3   0x96
4485 #define I2C_TDA8540_ALT4   0x98
4486 #define I2C_TDA8540_ALT5   0x9a
4487 #define I2C_TDA8540_ALT6   0x9c
4488
4489 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4490 {
4491         /* Simple maths */
4492         int key = input % 4;
4493         int matrix = input / 4;
4494
4495         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4496                 btv->c.nr, input, matrix, key);
4497
4498         /* Handles the input selection on the TDA8540's */
4499         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4500                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4501         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4502                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4503         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4504                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4505         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4506                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4507
4508         /* Handles the output enables on the TDA8540's */
4509         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4510                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4511         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4512                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4513         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4514                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4515         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4516                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4517
4518         /* 878's MUX0 is already selected for input via muxsel values */
4519 }
4520
4521
4522 /* PXC200 muxsel helper
4523  * luke@syseng.anu.edu.au
4524  * another transplant
4525  * from Alessandro Rubini (rubini@linux.it)
4526  *
4527  * There are 4 kinds of cards:
4528  * PXC200L which is bt848
4529  * PXC200F which is bt848 with PIC controlling mux
4530  * PXC200AL which is bt878
4531  * PXC200AF which is bt878 with PIC controlling mux
4532  */
4533 #define PX_CFG_PXC200F 0x01
4534 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4535 #define PX_I2C_PIC       0x0f
4536 #define PX_PXC200A_CARDID 0x200a1295
4537 #define PX_I2C_CMD_CFG   0x00
4538
4539 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4540 {
4541         int rc;
4542         long mux;
4543         int bitmask;
4544         unsigned char buf[2];
4545
4546         /* Read PIC config to determine if this is a PXC200F */
4547         /* PX_I2C_CMD_CFG*/
4548         buf[0]=0;
4549         buf[1]=0;
4550         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4551         if (rc) {
4552           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4553           /* not PXC ? do nothing */
4554           return;
4555         }
4556
4557         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4558         if (!(rc & PX_CFG_PXC200F)) {
4559           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4560           return;
4561         }
4562
4563
4564         /* The multiplexer in the 200F is handled by the GPIO port */
4565         /* get correct mapping between inputs  */
4566         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4567         /* ** not needed!?   */
4568         mux = input;
4569
4570         /* make sure output pins are enabled */
4571         /* bitmask=0x30f; */
4572         bitmask=0x302;
4573         /* check whether we have a PXC200A */
4574         if (btv->cardid == PX_PXC200A_CARDID)  {
4575            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4576            bitmask |= 7<<4; /* the DAC */
4577         }
4578         btwrite(bitmask, BT848_GPIO_OUT_EN);
4579
4580         bitmask = btread(BT848_GPIO_DATA);
4581         if (btv->cardid == PX_PXC200A_CARDID)
4582           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4583         else /* older device */
4584           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4585         btwrite(bitmask,BT848_GPIO_DATA);
4586
4587         /*
4588          * Was "to be safe, set the bt848 to input 0"
4589          * Actually, since it's ok at load time, better not messing
4590          * with these bits (on PXC200AF you need to set mux 2 here)
4591          *
4592          * needed because bttv-driver sets mux before calling this function
4593          */
4594         if (btv->cardid == PX_PXC200A_CARDID)
4595           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4596         else /* older device */
4597           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4598
4599         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4600 }
4601
4602 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4603 {
4604         unsigned int mux = input % 4;
4605
4606         if (input == btv->svhs)
4607                 mux = 0;
4608
4609         gpio_bits(0x3, mux);
4610 }
4611
4612 /*
4613  * GeoVision GV-800(S) functions
4614  * Bruno Christo <bchristo@inf.ufsm.br>
4615 */
4616
4617 /* This is a function to control the analog switch, which determines which
4618  * camera is routed to which controller.  The switch comprises an X-address
4619  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4620  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4621  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4622  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4623  * specified address. There is also a chip select (gpio bit 16).
4624  * The idea is to set the address and chip select together, bring
4625  * STROBE high, write the data, and finally bring STROBE back to low.
4626  */
4627 static void gv800s_write(struct bttv *btv,
4628                          unsigned char xaddr,
4629                          unsigned char yaddr,
4630                          unsigned char data) {
4631         /* On the "master" 878A:
4632         * GPIO bits 0-9 are used for the analog switch:
4633         *   00 - 03:    camera selector
4634         *   04 - 06:    878A (controller) selector
4635         *   16:         cselect
4636         *   17:         strobe
4637         *   18:         data (1->on, 0->off)
4638         *   19:         reset
4639         */
4640         const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4641         const u32 CSELECT = 1<<16;
4642         const u32 STROBE = 1<<17;
4643         const u32 DATA = data<<18;
4644
4645         gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4646         gpio_bits(0x20000, STROBE);             /* STROBE high */
4647         gpio_bits(0x40000, DATA);               /* write DATA */
4648         gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4649 }
4650
4651 /*
4652  * GeoVision GV-800(S) muxsel
4653  *
4654  * Each of the 4 cards (controllers) use this function.
4655  * The controller using this function selects the input through the GPIO pins
4656  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4657  *
4658  * The parameter 'input' is the requested camera number (0-4) on the controller.
4659  * The map array has the address of each input. Note that the addresses in the
4660  * array are in the sequence the original GeoVision driver uses, that is, set
4661  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4662  * the physical "camera 1" connector corresponds to controller 0 input 0,
4663  * "camera 2" corresponds to controller 1 input 0, and so on.
4664  *
4665  * After getting the input address, the function then writes the appropriate
4666  * data to the analog switch, and housekeeps the local copy of the switch
4667  * information.
4668  */
4669 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4670 {
4671         struct bttv *mctlr;
4672         char *sw_status;
4673         int xaddr, yaddr;
4674         static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4675                                           { 0x1, 0x5, 0xb, 0x7 },
4676                                           { 0x2, 0x8, 0xc, 0xe },
4677                                           { 0x3, 0x9, 0xd, 0xf } };
4678         input = input%4;
4679         mctlr = master[btv->c.nr];
4680         if (mctlr == NULL) {
4681                 /* do nothing until the "master" is detected */
4682                 return;
4683         }
4684         yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4685         sw_status = (char *)(&mctlr->mbox_we);
4686         xaddr = map[yaddr][input] & 0xf;
4687
4688         /* Check if the controller/camera pair has changed, ignore otherwise */
4689         if (sw_status[yaddr] != xaddr) {
4690                 /* disable the old switch, enable the new one and save status */
4691                 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4692                 sw_status[yaddr] = xaddr;
4693                 gv800s_write(mctlr, xaddr, yaddr, 1);
4694         }
4695 }
4696
4697 /* GeoVision GV-800(S) "master" chip init */
4698 static void gv800s_init(struct bttv *btv)
4699 {
4700         char *sw_status = (char *)(&btv->mbox_we);
4701         int ix;
4702
4703         gpio_inout(0xf107f, 0xf107f);
4704         gpio_write(1<<19); /* reset the analog MUX */
4705         gpio_write(0);
4706
4707         /* Preset camera 0 to the 4 controllers */
4708         for (ix = 0; ix < 4; ix++) {
4709                 sw_status[ix] = ix;
4710                 gv800s_write(btv, ix, ix, 1);
4711         }
4712
4713         /* Inputs on the "master" controller need this brightness fix */
4714         bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4715
4716         if (btv->c.nr > BTTV_MAX-4)
4717                 return;
4718         /*
4719          * Store the "master" controller pointer in the master
4720          * array for later use in the muxsel function.
4721          */
4722         master[btv->c.nr]   = btv;
4723         master[btv->c.nr+1] = btv;
4724         master[btv->c.nr+2] = btv;
4725         master[btv->c.nr+3] = btv;
4726 }
4727
4728 /* ----------------------------------------------------------------------- */
4729 /* motherboard chipset specific stuff                                      */
4730
4731 void __init bttv_check_chipset(void)
4732 {
4733         int pcipci_fail = 0;
4734         struct pci_dev *dev = NULL;
4735
4736         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4737                 pcipci_fail = 1;
4738         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4739                 triton1 = 1;
4740         if (pci_pci_problems & PCIPCI_VSFX)
4741                 vsfx = 1;
4742 #ifdef PCIPCI_ALIMAGIK
4743         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4744                 latency = 0x0A;
4745 #endif
4746
4747
4748         /* print warnings about any quirks found */
4749         if (triton1)
4750                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4751         if (vsfx)
4752                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4753         if (pcipci_fail) {
4754                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4755                                                         "together.\n");
4756                 if (!no_overlay) {
4757                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
4758                         no_overlay = 1;
4759                 } else {
4760                         printk(KERN_INFO "bttv: overlay forced. Use this "
4761                                                 "option at your own risk.\n");
4762                 }
4763         }
4764         if (UNSET != latency)
4765                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4766         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4767                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4768                 unsigned char b;
4769                 pci_read_config_byte(dev, 0x53, &b);
4770                 if (bttv_debug)
4771                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4772                                "bufcon=0x%02x\n",b);
4773         }
4774 }
4775
4776 int __devinit bttv_handle_chipset(struct bttv *btv)
4777 {
4778         unsigned char command;
4779
4780         if (!triton1 && !vsfx && UNSET == latency)
4781                 return 0;
4782
4783         if (bttv_verbose) {
4784                 if (triton1)
4785                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4786                 if (vsfx && btv->id >= 878)
4787                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4788                 if (UNSET != latency)
4789                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4790                                btv->c.nr,latency);
4791         }
4792
4793         if (btv->id < 878) {
4794                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4795                 if (triton1)
4796                         btv->triton1 = BT848_INT_ETBF;
4797         } else {
4798                 /* bt878 has a bit in the pci config space for it */
4799                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4800                 if (triton1)
4801                         command |= BT878_EN_TBFX;
4802                 if (vsfx)
4803                         command |= BT878_EN_VSFX;
4804                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4805         }
4806         if (UNSET != latency)
4807                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4808         return 0;
4809 }
4810
4811
4812 /*
4813  * Local variables:
4814  * c-basic-offset: 8
4815  * End:
4816  */