ide: replace IDE_TFLAG_* flags by IDE_VALID_*
[linux-2.6.git] / drivers / ide / ide-atapi.c
1 /*
2  * ATAPI support.
3  */
4
5 #include <linux/kernel.h>
6 #include <linux/cdrom.h>
7 #include <linux/delay.h>
8 #include <linux/ide.h>
9 #include <linux/scatterlist.h>
10
11 #include <scsi/scsi.h>
12
13 #ifdef DEBUG
14 #define debug_log(fmt, args...) \
15         printk(KERN_INFO "ide: " fmt, ## args)
16 #else
17 #define debug_log(fmt, args...) do {} while (0)
18 #endif
19
20 #define ATAPI_MIN_CDB_BYTES     12
21
22 static inline int dev_is_idecd(ide_drive_t *drive)
23 {
24         return drive->media == ide_cdrom || drive->media == ide_optical;
25 }
26
27 /*
28  * Check whether we can support a device,
29  * based on the ATAPI IDENTIFY command results.
30  */
31 int ide_check_atapi_device(ide_drive_t *drive, const char *s)
32 {
33         u16 *id = drive->id;
34         u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;
35
36         *((u16 *)&gcw) = id[ATA_ID_CONFIG];
37
38         protocol    = (gcw[1] & 0xC0) >> 6;
39         device_type =  gcw[1] & 0x1F;
40         removable   = (gcw[0] & 0x80) >> 7;
41         drq_type    = (gcw[0] & 0x60) >> 5;
42         packet_size =  gcw[0] & 0x03;
43
44 #ifdef CONFIG_PPC
45         /* kludge for Apple PowerBook internal zip */
46         if (drive->media == ide_floppy && device_type == 5 &&
47             !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
48             strstr((char *)&id[ATA_ID_PROD], "ZIP"))
49                 device_type = 0;
50 #endif
51
52         if (protocol != 2)
53                 printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
54                         s, drive->name, protocol);
55         else if ((drive->media == ide_floppy && device_type != 0) ||
56                  (drive->media == ide_tape && device_type != 1))
57                 printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
58                         s, drive->name, device_type);
59         else if (removable == 0)
60                 printk(KERN_ERR "%s: %s: the removable flag is not set\n",
61                         s, drive->name);
62         else if (drive->media == ide_floppy && drq_type == 3)
63                 printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
64                         "supported\n", s, drive->name, drq_type);
65         else if (packet_size != 0)
66                 printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
67                         "bytes\n", s, drive->name, packet_size);
68         else
69                 return 1;
70         return 0;
71 }
72 EXPORT_SYMBOL_GPL(ide_check_atapi_device);
73
74 void ide_init_pc(struct ide_atapi_pc *pc)
75 {
76         memset(pc, 0, sizeof(*pc));
77         pc->buf = pc->pc_buf;
78         pc->buf_size = IDE_PC_BUFFER_SIZE;
79 }
80 EXPORT_SYMBOL_GPL(ide_init_pc);
81
82 /*
83  * Generate a new packet command request in front of the request queue, before
84  * the current request, so that it will be processed immediately, on the next
85  * pass through the driver.
86  */
87 static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
88                               struct ide_atapi_pc *pc, struct request *rq)
89 {
90         blk_rq_init(NULL, rq);
91         rq->cmd_type = REQ_TYPE_SPECIAL;
92         rq->cmd_flags |= REQ_PREEMPT;
93         rq->buffer = (char *)pc;
94         rq->rq_disk = disk;
95
96         if (pc->req_xfer) {
97                 rq->data = pc->buf;
98                 rq->data_len = pc->req_xfer;
99         }
100
101         memcpy(rq->cmd, pc->c, 12);
102         if (drive->media == ide_tape)
103                 rq->cmd[13] = REQ_IDETAPE_PC1;
104
105         drive->hwif->rq = NULL;
106
107         elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
108 }
109
110 /*
111  * Add a special packet command request to the tail of the request queue,
112  * and wait for it to be serviced.
113  */
114 int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
115                       struct ide_atapi_pc *pc)
116 {
117         struct request *rq;
118         int error;
119
120         rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
121         rq->cmd_type = REQ_TYPE_SPECIAL;
122         rq->buffer = (char *)pc;
123
124         if (pc->req_xfer) {
125                 rq->data = pc->buf;
126                 rq->data_len = pc->req_xfer;
127         }
128
129         memcpy(rq->cmd, pc->c, 12);
130         if (drive->media == ide_tape)
131                 rq->cmd[13] = REQ_IDETAPE_PC1;
132         error = blk_execute_rq(drive->queue, disk, rq, 0);
133         blk_put_request(rq);
134
135         return error;
136 }
137 EXPORT_SYMBOL_GPL(ide_queue_pc_tail);
138
139 int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
140 {
141         struct ide_atapi_pc pc;
142
143         ide_init_pc(&pc);
144         pc.c[0] = TEST_UNIT_READY;
145
146         return ide_queue_pc_tail(drive, disk, &pc);
147 }
148 EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);
149
150 int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
151 {
152         struct ide_atapi_pc pc;
153
154         ide_init_pc(&pc);
155         pc.c[0] = START_STOP;
156         pc.c[4] = start;
157
158         if (drive->media == ide_tape)
159                 pc.flags |= PC_FLAG_WAIT_FOR_DSC;
160
161         return ide_queue_pc_tail(drive, disk, &pc);
162 }
163 EXPORT_SYMBOL_GPL(ide_do_start_stop);
164
165 int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
166 {
167         struct ide_atapi_pc pc;
168
169         if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
170                 return 0;
171
172         ide_init_pc(&pc);
173         pc.c[0] = ALLOW_MEDIUM_REMOVAL;
174         pc.c[4] = on;
175
176         return ide_queue_pc_tail(drive, disk, &pc);
177 }
178 EXPORT_SYMBOL_GPL(ide_set_media_lock);
179
180 void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
181 {
182         ide_init_pc(pc);
183         pc->c[0] = REQUEST_SENSE;
184         if (drive->media == ide_floppy) {
185                 pc->c[4] = 255;
186                 pc->req_xfer = 18;
187         } else {
188                 pc->c[4] = 20;
189                 pc->req_xfer = 20;
190         }
191 }
192 EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
193
194 /*
195  * Called when an error was detected during the last packet command.
196  * We queue a request sense packet command in the head of the request list.
197  */
198 void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
199 {
200         struct request *rq = &drive->request_sense_rq;
201         struct ide_atapi_pc *pc = &drive->request_sense_pc;
202
203         (void)ide_read_error(drive);
204         ide_create_request_sense_cmd(drive, pc);
205         if (drive->media == ide_tape)
206                 set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
207         ide_queue_pc_head(drive, disk, pc, rq);
208 }
209 EXPORT_SYMBOL_GPL(ide_retry_pc);
210
211 int ide_cd_expiry(ide_drive_t *drive)
212 {
213         struct request *rq = drive->hwif->rq;
214         unsigned long wait = 0;
215
216         debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]);
217
218         /*
219          * Some commands are *slow* and normally take a long time to complete.
220          * Usually we can use the ATAPI "disconnect" to bypass this, but not all
221          * commands/drives support that. Let ide_timer_expiry keep polling us
222          * for these.
223          */
224         switch (rq->cmd[0]) {
225         case GPCMD_BLANK:
226         case GPCMD_FORMAT_UNIT:
227         case GPCMD_RESERVE_RZONE_TRACK:
228         case GPCMD_CLOSE_TRACK:
229         case GPCMD_FLUSH_CACHE:
230                 wait = ATAPI_WAIT_PC;
231                 break;
232         default:
233                 if (!(rq->cmd_flags & REQ_QUIET))
234                         printk(KERN_INFO "cmd 0x%x timed out\n",
235                                          rq->cmd[0]);
236                 wait = 0;
237                 break;
238         }
239         return wait;
240 }
241 EXPORT_SYMBOL_GPL(ide_cd_expiry);
242
243 int ide_cd_get_xferlen(struct request *rq)
244 {
245         if (blk_fs_request(rq))
246                 return 32768;
247         else if (blk_sense_request(rq) || blk_pc_request(rq) ||
248                          rq->cmd_type == REQ_TYPE_ATA_PC)
249                 return rq->data_len;
250         else
251                 return 0;
252 }
253 EXPORT_SYMBOL_GPL(ide_cd_get_xferlen);
254
255 void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
256 {
257         struct ide_cmd cmd;
258
259         memset(&cmd, 0, sizeof(cmd));
260         cmd.valid.in.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | IDE_VALID_NSECT;
261
262         drive->hwif->tp_ops->tf_read(drive, &cmd);
263
264         *bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam;
265         *ireason = cmd.tf.nsect & 3;
266 }
267 EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
268
269 /*
270  * This is the usual interrupt handler which will be called during a packet
271  * command.  We will transfer some of the data (as requested by the drive)
272  * and will re-point interrupt handler to us.
273  */
274 static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
275 {
276         struct ide_atapi_pc *pc = drive->pc;
277         ide_hwif_t *hwif = drive->hwif;
278         struct ide_cmd *cmd = &hwif->cmd;
279         struct request *rq = hwif->rq;
280         const struct ide_tp_ops *tp_ops = hwif->tp_ops;
281         xfer_func_t *xferfunc;
282         unsigned int timeout, done;
283         u16 bcount;
284         u8 stat, ireason, dsc = 0;
285         u8 write = !!(pc->flags & PC_FLAG_WRITING);
286
287         debug_log("Enter %s - interrupt handler\n", __func__);
288
289         timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
290                                                : WAIT_TAPE_CMD;
291
292         /* Clear the interrupt */
293         stat = tp_ops->read_status(hwif);
294
295         if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
296                 int rc;
297
298                 drive->waiting_for_dma = 0;
299                 rc = hwif->dma_ops->dma_end(drive);
300                 ide_dma_unmap_sg(drive, cmd);
301
302                 if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) {
303                         if (drive->media == ide_floppy)
304                                 printk(KERN_ERR "%s: DMA %s error\n",
305                                         drive->name, rq_data_dir(pc->rq)
306                                                      ? "write" : "read");
307                         pc->flags |= PC_FLAG_DMA_ERROR;
308                 } else {
309                         pc->xferred = pc->req_xfer;
310                         if (drive->pc_update_buffers)
311                                 drive->pc_update_buffers(drive, pc);
312                 }
313                 debug_log("%s: DMA finished\n", drive->name);
314         }
315
316         /* No more interrupts */
317         if ((stat & ATA_DRQ) == 0) {
318                 int uptodate, error;
319                 unsigned int done;
320
321                 debug_log("Packet command completed, %d bytes transferred\n",
322                           pc->xferred);
323
324                 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
325
326                 local_irq_enable_in_hardirq();
327
328                 if (drive->media == ide_tape &&
329                     (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
330                         stat &= ~ATA_ERR;
331
332                 if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
333                         /* Error detected */
334                         debug_log("%s: I/O error\n", drive->name);
335
336                         if (drive->media != ide_tape)
337                                 pc->rq->errors++;
338
339                         if (rq->cmd[0] == REQUEST_SENSE) {
340                                 printk(KERN_ERR "%s: I/O error in request sense"
341                                                 " command\n", drive->name);
342                                 return ide_do_reset(drive);
343                         }
344
345                         debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
346
347                         /* Retry operation */
348                         ide_retry_pc(drive, rq->rq_disk);
349
350                         /* queued, but not started */
351                         return ide_stopped;
352                 }
353                 pc->error = 0;
354
355                 if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
356                         dsc = 1;
357
358                 /* Command finished - Call the callback function */
359                 uptodate = drive->pc_callback(drive, dsc);
360
361                 if (uptodate == 0)
362                         drive->failed_pc = NULL;
363
364                 if (blk_special_request(rq)) {
365                         rq->errors = 0;
366                         done = blk_rq_bytes(rq);
367                         error = 0;
368                 } else {
369
370                         if (blk_fs_request(rq) == 0 && uptodate <= 0) {
371                                 if (rq->errors == 0)
372                                         rq->errors = -EIO;
373                         }
374
375                         if (drive->media == ide_tape)
376                                 done = ide_rq_bytes(rq); /* FIXME */
377                         else
378                                 done = blk_rq_bytes(rq);
379
380                         error = uptodate ? 0 : -EIO;
381                 }
382
383                 ide_complete_rq(drive, error, done);
384                 return ide_stopped;
385         }
386
387         if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
388                 pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
389                 printk(KERN_ERR "%s: The device wants to issue more interrupts "
390                                 "in DMA mode\n", drive->name);
391                 ide_dma_off(drive);
392                 return ide_do_reset(drive);
393         }
394
395         /* Get the number of bytes to transfer on this interrupt. */
396         ide_read_bcount_and_ireason(drive, &bcount, &ireason);
397
398         if (ireason & ATAPI_COD) {
399                 printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
400                 return ide_do_reset(drive);
401         }
402
403         if (((ireason & ATAPI_IO) == ATAPI_IO) == write) {
404                 /* Hopefully, we will never get here */
405                 printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
406                                 "to %s!\n", drive->name,
407                                 (ireason & ATAPI_IO) ? "Write" : "Read",
408                                 (ireason & ATAPI_IO) ? "Read" : "Write");
409                 return ide_do_reset(drive);
410         }
411
412         xferfunc = write ? tp_ops->output_data : tp_ops->input_data;
413
414         if (drive->media == ide_floppy && pc->buf == NULL) {
415                 done = min_t(unsigned int, bcount, cmd->nleft);
416                 ide_pio_bytes(drive, cmd, write, done);
417         } else if (drive->media == ide_tape && pc->bh) {
418                 done = drive->pc_io_buffers(drive, pc, bcount, write);
419         } else {
420                 done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred);
421                 xferfunc(drive, NULL, pc->cur_pos, done);
422         }
423
424         /* Update the current position */
425         pc->xferred += done;
426         pc->cur_pos += done;
427
428         bcount -= done;
429
430         if (bcount)
431                 ide_pad_transfer(drive, write, bcount);
432
433         debug_log("[cmd %x] transferred %d bytes, padded %d bytes\n",
434                   rq->cmd[0], done, bcount);
435
436         /* And set the interrupt handler again */
437         ide_set_handler(drive, ide_pc_intr, timeout);
438         return ide_started;
439 }
440
441 static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf,
442                                 u16 bcount, u8 dma)
443 {
444         cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO;
445         cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM |
446                             IDE_VALID_FEATURE | valid_tf;
447         cmd->tf.command = ATA_CMD_PACKET;
448         cmd->tf.feature = dma;          /* Use PIO/DMA */
449         cmd->tf.lbam    = bcount & 0xff;
450         cmd->tf.lbah    = (bcount >> 8) & 0xff;
451 }
452
453 static u8 ide_read_ireason(ide_drive_t *drive)
454 {
455         struct ide_cmd cmd;
456
457         memset(&cmd, 0, sizeof(cmd));
458         cmd.valid.in.tf = IDE_VALID_NSECT;
459
460         drive->hwif->tp_ops->tf_read(drive, &cmd);
461
462         return cmd.tf.nsect & 3;
463 }
464
465 static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
466 {
467         int retries = 100;
468
469         while (retries-- && ((ireason & ATAPI_COD) == 0 ||
470                 (ireason & ATAPI_IO))) {
471                 printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
472                                 "a packet command, retrying\n", drive->name);
473                 udelay(100);
474                 ireason = ide_read_ireason(drive);
475                 if (retries == 0) {
476                         printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
477                                         "a packet command, ignoring\n",
478                                         drive->name);
479                         ireason |= ATAPI_COD;
480                         ireason &= ~ATAPI_IO;
481                 }
482         }
483
484         return ireason;
485 }
486
487 static int ide_delayed_transfer_pc(ide_drive_t *drive)
488 {
489         /* Send the actual packet */
490         drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
491
492         /* Timeout for the packet command */
493         return WAIT_FLOPPY_CMD;
494 }
495
496 static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
497 {
498         struct ide_atapi_pc *uninitialized_var(pc);
499         ide_hwif_t *hwif = drive->hwif;
500         struct request *rq = hwif->rq;
501         ide_expiry_t *expiry;
502         unsigned int timeout;
503         int cmd_len;
504         ide_startstop_t startstop;
505         u8 ireason;
506
507         if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
508                 printk(KERN_ERR "%s: Strange, packet command initiated yet "
509                                 "DRQ isn't asserted\n", drive->name);
510                 return startstop;
511         }
512
513         if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
514                 if (drive->dma)
515                         drive->waiting_for_dma = 1;
516         }
517
518         if (dev_is_idecd(drive)) {
519                 /* ATAPI commands get padded out to 12 bytes minimum */
520                 cmd_len = COMMAND_SIZE(rq->cmd[0]);
521                 if (cmd_len < ATAPI_MIN_CDB_BYTES)
522                         cmd_len = ATAPI_MIN_CDB_BYTES;
523
524                 timeout = rq->timeout;
525                 expiry  = ide_cd_expiry;
526         } else {
527                 pc = drive->pc;
528
529                 cmd_len = ATAPI_MIN_CDB_BYTES;
530
531                 /*
532                  * If necessary schedule the packet transfer to occur 'timeout'
533                  * miliseconds later in ide_delayed_transfer_pc() after the
534                  * device says it's ready for a packet.
535                  */
536                 if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
537                         timeout = drive->pc_delay;
538                         expiry = &ide_delayed_transfer_pc;
539                 } else {
540                         timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
541                                                                : WAIT_TAPE_CMD;
542                         expiry = NULL;
543                 }
544
545                 ireason = ide_read_ireason(drive);
546                 if (drive->media == ide_tape)
547                         ireason = ide_wait_ireason(drive, ireason);
548
549                 if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
550                         printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
551                                         "a packet command\n", drive->name);
552
553                         return ide_do_reset(drive);
554                 }
555         }
556
557         hwif->expiry = expiry;
558
559         /* Set the interrupt routine */
560         ide_set_handler(drive,
561                         (dev_is_idecd(drive) ? drive->irq_handler
562                                              : ide_pc_intr),
563                         timeout);
564
565         /* Send the actual packet */
566         if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
567                 hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
568
569         /* Begin DMA, if necessary */
570         if (dev_is_idecd(drive)) {
571                 if (drive->dma)
572                         hwif->dma_ops->dma_start(drive);
573         } else {
574                 if (pc->flags & PC_FLAG_DMA_OK) {
575                         pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
576                         hwif->dma_ops->dma_start(drive);
577                 }
578         }
579
580         return ide_started;
581 }
582
583 ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd)
584 {
585         struct ide_atapi_pc *pc;
586         ide_hwif_t *hwif = drive->hwif;
587         ide_expiry_t *expiry = NULL;
588         struct request *rq = hwif->rq;
589         unsigned int timeout;
590         u16 bcount;
591         u8 valid_tf;
592         u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
593
594         if (dev_is_idecd(drive)) {
595                 valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL;
596                 bcount = ide_cd_get_xferlen(rq);
597                 expiry = ide_cd_expiry;
598                 timeout = ATAPI_WAIT_PC;
599
600                 if (drive->dma)
601                         drive->dma = !ide_dma_prepare(drive, cmd);
602         } else {
603                 pc = drive->pc;
604
605                 /* We haven't transferred any data yet */
606                 pc->xferred = 0;
607                 pc->cur_pos = pc->buf;
608
609                 valid_tf = IDE_VALID_DEVICE;
610                 bcount = ((drive->media == ide_tape) ?
611                                 pc->req_xfer :
612                                 min(pc->req_xfer, 63 * 1024));
613
614                 if (pc->flags & PC_FLAG_DMA_ERROR) {
615                         pc->flags &= ~PC_FLAG_DMA_ERROR;
616                         ide_dma_off(drive);
617                 }
618
619                 if (pc->flags & PC_FLAG_DMA_OK)
620                         drive->dma = !ide_dma_prepare(drive, cmd);
621
622                 if (!drive->dma)
623                         pc->flags &= ~PC_FLAG_DMA_OK;
624
625                 timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
626                                                        : WAIT_TAPE_CMD;
627         }
628
629         ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma);
630
631         (void)do_rw_taskfile(drive, cmd);
632
633         if (drq_int) {
634                 if (drive->dma)
635                         drive->waiting_for_dma = 0;
636                 hwif->expiry = expiry;
637         }
638
639         ide_execute_command(drive, cmd, ide_transfer_pc, timeout);
640
641         return drq_int ? ide_started : ide_transfer_pc(drive);
642 }
643 EXPORT_SYMBOL_GPL(ide_issue_pc);