[PATCH] hwmon: Discard bogus comment about init setting limits
[linux-2.6.git] / drivers / hwmon / w83781d.c
1 /*
2     w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
3                 monitoring
4     Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
5     Philip Edelbrock <phil@netroedge.com>,
6     and Mark Studebaker <mdsxyz123@yahoo.com>
7
8     This program is free software; you can redistribute it and/or modify
9     it under the terms of the GNU General Public License as published by
10     the Free Software Foundation; either version 2 of the License, or
11     (at your option) any later version.
12
13     This program is distributed in the hope that it will be useful,
14     but WITHOUT ANY WARRANTY; without even the implied warranty of
15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16     GNU General Public License for more details.
17
18     You should have received a copy of the GNU General Public License
19     along with this program; if not, write to the Free Software
20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23 /*
24     Supports following chips:
25
26     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
27     as99127f    7       3       0       3       0x31    0x12c3  yes     no
28     as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
29     w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
30     w83627hf    9       3       2       3       0x21    0x5ca3  yes     yes(LPC)
31     w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
32     w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
33
34 */
35
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/slab.h>
39 #include <linux/jiffies.h>
40 #include <linux/i2c.h>
41 #include <linux/i2c-isa.h>
42 #include <linux/hwmon.h>
43 #include <linux/hwmon-vid.h>
44 #include <linux/err.h>
45 #include <asm/io.h>
46 #include "lm75.h"
47
48 /* Addresses to scan */
49 static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
50                                         0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
51                                         0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
52 static unsigned short isa_address = 0x290;
53
54 /* Insmod parameters */
55 I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
56 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
57                     "{bus, clientaddr, subclientaddr1, subclientaddr2}");
58
59 static int init = 1;
60 module_param(init, bool, 0);
61 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
62
63 /* Constants specified below */
64
65 /* Length of ISA address segment */
66 #define W83781D_EXTENT                  8
67
68 /* Where are the ISA address/data registers relative to the base address */
69 #define W83781D_ADDR_REG_OFFSET         5
70 #define W83781D_DATA_REG_OFFSET         6
71
72 /* The W83781D registers */
73 /* The W83782D registers for nr=7,8 are in bank 5 */
74 #define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
75                                                     (0x554 + (((nr) - 7) * 2)))
76 #define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
77                                                     (0x555 + (((nr) - 7) * 2)))
78 #define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
79                                                     (0x550 + (nr) - 7))
80
81 #define W83781D_REG_FAN_MIN(nr)         (0x3a + (nr))
82 #define W83781D_REG_FAN(nr)             (0x27 + (nr))
83
84 #define W83781D_REG_BANK                0x4E
85 #define W83781D_REG_TEMP2_CONFIG        0x152
86 #define W83781D_REG_TEMP3_CONFIG        0x252
87 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
88                                         ((nr == 2) ? (0x0150) : \
89                                                      (0x27)))
90 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
91                                         ((nr == 2) ? (0x153) : \
92                                                      (0x3A)))
93 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
94                                         ((nr == 2) ? (0x155) : \
95                                                      (0x39)))
96
97 #define W83781D_REG_CONFIG              0x40
98 #define W83781D_REG_ALARM1              0x41
99 #define W83781D_REG_ALARM2              0x42
100 #define W83781D_REG_ALARM3              0x450   /* not on W83781D */
101
102 #define W83781D_REG_IRQ                 0x4C
103 #define W83781D_REG_BEEP_CONFIG         0x4D
104 #define W83781D_REG_BEEP_INTS1          0x56
105 #define W83781D_REG_BEEP_INTS2          0x57
106 #define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
107
108 #define W83781D_REG_VID_FANDIV          0x47
109
110 #define W83781D_REG_CHIPID              0x49
111 #define W83781D_REG_WCHIPID             0x58
112 #define W83781D_REG_CHIPMAN             0x4F
113 #define W83781D_REG_PIN                 0x4B
114
115 /* 782D/783S only */
116 #define W83781D_REG_VBAT                0x5D
117
118 /* PWM 782D (1-4) and 783S (1-2) only */
119 #define W83781D_REG_PWM1                0x5B    /* 782d and 783s/627hf datasheets disagree */
120                                                 /* on which is which; */
121 #define W83781D_REG_PWM2                0x5A    /* We follow the 782d convention here, */
122                                                 /* However 782d is probably wrong. */
123 #define W83781D_REG_PWM3                0x5E
124 #define W83781D_REG_PWM4                0x5F
125 #define W83781D_REG_PWMCLK12            0x5C
126 #define W83781D_REG_PWMCLK34            0x45C
127 static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
128         W83781D_REG_PWM3, W83781D_REG_PWM4
129 };
130
131 #define W83781D_REG_PWM(nr)             (regpwm[(nr) - 1])
132
133 #define W83781D_REG_I2C_ADDR            0x48
134 #define W83781D_REG_I2C_SUBADDR         0x4A
135
136 /* The following are undocumented in the data sheets however we
137    received the information in an email from Winbond tech support */
138 /* Sensor selection - not on 781d */
139 #define W83781D_REG_SCFG1               0x5D
140 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
141
142 #define W83781D_REG_SCFG2               0x59
143 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
144
145 #define W83781D_DEFAULT_BETA            3435
146
147 /* RT Table registers */
148 #define W83781D_REG_RT_IDX              0x50
149 #define W83781D_REG_RT_VAL              0x51
150
151 /* Conversions. Rounding and limit checking is only done on the TO_REG
152    variants. Note that you should be a bit careful with which arguments
153    these macros are called: arguments may be evaluated more than once.
154    Fixing this is just not worth it. */
155 #define IN_TO_REG(val)                  (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
156 #define IN_FROM_REG(val)                (((val) * 16) / 10)
157
158 static inline u8
159 FAN_TO_REG(long rpm, int div)
160 {
161         if (rpm == 0)
162                 return 255;
163         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
164         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
165 }
166
167 #define FAN_FROM_REG(val,div)           ((val) == 0   ? -1 : \
168                                         ((val) == 255 ? 0 : \
169                                                         1350000 / ((val) * (div))))
170
171 #define TEMP_TO_REG(val)                (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
172                                                 : (val)) / 1000, 0, 0xff))
173 #define TEMP_FROM_REG(val)              (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
174
175 #define PWM_FROM_REG(val)               (val)
176 #define PWM_TO_REG(val)                 (SENSORS_LIMIT((val),0,255))
177 #define BEEP_MASK_FROM_REG(val,type)    ((type) == as99127f ? \
178                                          (val) ^ 0x7fff : (val))
179 #define BEEP_MASK_TO_REG(val,type)      ((type) == as99127f ? \
180                                          (~(val)) & 0x7fff : (val) & 0xffffff)
181
182 #define BEEP_ENABLE_TO_REG(val)         ((val) ? 1 : 0)
183 #define BEEP_ENABLE_FROM_REG(val)       ((val) ? 1 : 0)
184
185 #define DIV_FROM_REG(val)               (1 << (val))
186
187 static inline u8
188 DIV_TO_REG(long val, enum chips type)
189 {
190         int i;
191         val = SENSORS_LIMIT(val, 1,
192                             ((type == w83781d
193                               || type == as99127f) ? 8 : 128)) >> 1;
194         for (i = 0; i < 7; i++) {
195                 if (val == 0)
196                         break;
197                 val >>= 1;
198         }
199         return ((u8) i);
200 }
201
202 /* There are some complications in a module like this. First off, W83781D chips
203    may be both present on the SMBus and the ISA bus, and we have to handle
204    those cases separately at some places. Second, there might be several
205    W83781D chips available (well, actually, that is probably never done; but
206    it is a clean illustration of how to handle a case like that). Finally,
207    a specific chip may be attached to *both* ISA and SMBus, and we would
208    not like to detect it double. Fortunately, in the case of the W83781D at
209    least, a register tells us what SMBus address we are on, so that helps
210    a bit - except if there could be more than one SMBus. Groan. No solution
211    for this yet. */
212
213 /* This module may seem overly long and complicated. In fact, it is not so
214    bad. Quite a lot of bookkeeping is done. A real driver can often cut
215    some corners. */
216
217 /* For each registered W83781D, we need to keep some data in memory. That
218    data is pointed to by w83781d_list[NR]->data. The structure itself is
219    dynamically allocated, at the same time when a new w83781d client is
220    allocated. */
221 struct w83781d_data {
222         struct i2c_client client;
223         struct class_device *class_dev;
224         struct semaphore lock;
225         enum chips type;
226
227         struct semaphore update_lock;
228         char valid;             /* !=0 if following fields are valid */
229         unsigned long last_updated;     /* In jiffies */
230
231         struct i2c_client *lm75[2];     /* for secondary I2C addresses */
232         /* array of 2 pointers to subclients */
233
234         u8 in[9];               /* Register value - 8 & 9 for 782D only */
235         u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
236         u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
237         u8 fan[3];              /* Register value */
238         u8 fan_min[3];          /* Register value */
239         u8 temp;
240         u8 temp_max;            /* Register value */
241         u8 temp_max_hyst;       /* Register value */
242         u16 temp_add[2];        /* Register value */
243         u16 temp_max_add[2];    /* Register value */
244         u16 temp_max_hyst_add[2];       /* Register value */
245         u8 fan_div[3];          /* Register encoding, shifted right */
246         u8 vid;                 /* Register encoding, combined */
247         u32 alarms;             /* Register encoding, combined */
248         u32 beep_mask;          /* Register encoding, combined */
249         u8 beep_enable;         /* Boolean */
250         u8 pwm[4];              /* Register value */
251         u8 pwmenable[4];        /* Boolean */
252         u16 sens[3];            /* 782D/783S only.
253                                    1 = pentium diode; 2 = 3904 diode;
254                                    3000-5000 = thermistor beta.
255                                    Default = 3435. 
256                                    Other Betas unimplemented */
257         u8 vrm;
258 };
259
260 static int w83781d_attach_adapter(struct i2c_adapter *adapter);
261 static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter);
262 static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
263 static int w83781d_detach_client(struct i2c_client *client);
264
265 static int w83781d_read_value(struct i2c_client *client, u16 register);
266 static int w83781d_write_value(struct i2c_client *client, u16 register,
267                                u16 value);
268 static struct w83781d_data *w83781d_update_device(struct device *dev);
269 static void w83781d_init_client(struct i2c_client *client);
270
271 static struct i2c_driver w83781d_driver = {
272         .owner = THIS_MODULE,
273         .name = "w83781d",
274         .id = I2C_DRIVERID_W83781D,
275         .flags = I2C_DF_NOTIFY,
276         .attach_adapter = w83781d_attach_adapter,
277         .detach_client = w83781d_detach_client,
278 };
279
280 static struct i2c_driver w83781d_isa_driver = {
281         .owner = THIS_MODULE,
282         .name = "w83781d-isa",
283         .attach_adapter = w83781d_isa_attach_adapter,
284         .detach_client = w83781d_detach_client,
285 };
286
287
288 /* following are the sysfs callback functions */
289 #define show_in_reg(reg) \
290 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
291 { \
292         struct w83781d_data *data = w83781d_update_device(dev); \
293         return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
294 }
295 show_in_reg(in);
296 show_in_reg(in_min);
297 show_in_reg(in_max);
298
299 #define store_in_reg(REG, reg) \
300 static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
301 { \
302         struct i2c_client *client = to_i2c_client(dev); \
303         struct w83781d_data *data = i2c_get_clientdata(client); \
304         u32 val; \
305          \
306         val = simple_strtoul(buf, NULL, 10) / 10; \
307          \
308         down(&data->update_lock); \
309         data->in_##reg[nr] = IN_TO_REG(val); \
310         w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
311          \
312         up(&data->update_lock); \
313         return count; \
314 }
315 store_in_reg(MIN, min);
316 store_in_reg(MAX, max);
317
318 #define sysfs_in_offset(offset) \
319 static ssize_t \
320 show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
321 { \
322         return show_in(dev, buf, offset); \
323 } \
324 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
325
326 #define sysfs_in_reg_offset(reg, offset) \
327 static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
328 { \
329         return show_in_##reg (dev, buf, offset); \
330 } \
331 static ssize_t store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
332 { \
333         return store_in_##reg (dev, buf, count, offset); \
334 } \
335 static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
336
337 #define sysfs_in_offsets(offset) \
338 sysfs_in_offset(offset); \
339 sysfs_in_reg_offset(min, offset); \
340 sysfs_in_reg_offset(max, offset);
341
342 sysfs_in_offsets(0);
343 sysfs_in_offsets(1);
344 sysfs_in_offsets(2);
345 sysfs_in_offsets(3);
346 sysfs_in_offsets(4);
347 sysfs_in_offsets(5);
348 sysfs_in_offsets(6);
349 sysfs_in_offsets(7);
350 sysfs_in_offsets(8);
351
352 #define device_create_file_in(client, offset) \
353 do { \
354 device_create_file(&client->dev, &dev_attr_in##offset##_input); \
355 device_create_file(&client->dev, &dev_attr_in##offset##_min); \
356 device_create_file(&client->dev, &dev_attr_in##offset##_max); \
357 } while (0)
358
359 #define show_fan_reg(reg) \
360 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
361 { \
362         struct w83781d_data *data = w83781d_update_device(dev); \
363         return sprintf(buf,"%ld\n", \
364                 FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
365 }
366 show_fan_reg(fan);
367 show_fan_reg(fan_min);
368
369 static ssize_t
370 store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
371 {
372         struct i2c_client *client = to_i2c_client(dev);
373         struct w83781d_data *data = i2c_get_clientdata(client);
374         u32 val;
375
376         val = simple_strtoul(buf, NULL, 10);
377
378         down(&data->update_lock);
379         data->fan_min[nr - 1] =
380             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
381         w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
382                             data->fan_min[nr - 1]);
383
384         up(&data->update_lock);
385         return count;
386 }
387
388 #define sysfs_fan_offset(offset) \
389 static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
390 { \
391         return show_fan(dev, buf, offset); \
392 } \
393 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
394
395 #define sysfs_fan_min_offset(offset) \
396 static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
397 { \
398         return show_fan_min(dev, buf, offset); \
399 } \
400 static ssize_t store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
401 { \
402         return store_fan_min(dev, buf, count, offset); \
403 } \
404 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
405
406 sysfs_fan_offset(1);
407 sysfs_fan_min_offset(1);
408 sysfs_fan_offset(2);
409 sysfs_fan_min_offset(2);
410 sysfs_fan_offset(3);
411 sysfs_fan_min_offset(3);
412
413 #define device_create_file_fan(client, offset) \
414 do { \
415 device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
416 device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
417 } while (0)
418
419 #define show_temp_reg(reg) \
420 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
421 { \
422         struct w83781d_data *data = w83781d_update_device(dev); \
423         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
424                 return sprintf(buf,"%d\n", \
425                         LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
426         } else {        /* TEMP1 */ \
427                 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
428         } \
429 }
430 show_temp_reg(temp);
431 show_temp_reg(temp_max);
432 show_temp_reg(temp_max_hyst);
433
434 #define store_temp_reg(REG, reg) \
435 static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
436 { \
437         struct i2c_client *client = to_i2c_client(dev); \
438         struct w83781d_data *data = i2c_get_clientdata(client); \
439         s32 val; \
440          \
441         val = simple_strtol(buf, NULL, 10); \
442          \
443         down(&data->update_lock); \
444          \
445         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
446                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
447                 w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
448                                 data->temp_##reg##_add[nr-2]); \
449         } else {        /* TEMP1 */ \
450                 data->temp_##reg = TEMP_TO_REG(val); \
451                 w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
452                         data->temp_##reg); \
453         } \
454          \
455         up(&data->update_lock); \
456         return count; \
457 }
458 store_temp_reg(OVER, max);
459 store_temp_reg(HYST, max_hyst);
460
461 #define sysfs_temp_offset(offset) \
462 static ssize_t \
463 show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
464 { \
465         return show_temp(dev, buf, offset); \
466 } \
467 static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
468
469 #define sysfs_temp_reg_offset(reg, offset) \
470 static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
471 { \
472         return show_temp_##reg (dev, buf, offset); \
473 } \
474 static ssize_t store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
475 { \
476         return store_temp_##reg (dev, buf, count, offset); \
477 } \
478 static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
479
480 #define sysfs_temp_offsets(offset) \
481 sysfs_temp_offset(offset); \
482 sysfs_temp_reg_offset(max, offset); \
483 sysfs_temp_reg_offset(max_hyst, offset);
484
485 sysfs_temp_offsets(1);
486 sysfs_temp_offsets(2);
487 sysfs_temp_offsets(3);
488
489 #define device_create_file_temp(client, offset) \
490 do { \
491 device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
492 device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
493 device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
494 } while (0)
495
496 static ssize_t
497 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
498 {
499         struct w83781d_data *data = w83781d_update_device(dev);
500         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
501 }
502
503 static
504 DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
505 #define device_create_file_vid(client) \
506 device_create_file(&client->dev, &dev_attr_cpu0_vid);
507 static ssize_t
508 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
509 {
510         struct w83781d_data *data = w83781d_update_device(dev);
511         return sprintf(buf, "%ld\n", (long) data->vrm);
512 }
513
514 static ssize_t
515 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
516 {
517         struct i2c_client *client = to_i2c_client(dev);
518         struct w83781d_data *data = i2c_get_clientdata(client);
519         u32 val;
520
521         val = simple_strtoul(buf, NULL, 10);
522         data->vrm = val;
523
524         return count;
525 }
526
527 static
528 DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
529 #define device_create_file_vrm(client) \
530 device_create_file(&client->dev, &dev_attr_vrm);
531 static ssize_t
532 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
533 {
534         struct w83781d_data *data = w83781d_update_device(dev);
535         return sprintf(buf, "%u\n", data->alarms);
536 }
537
538 static
539 DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
540 #define device_create_file_alarms(client) \
541 device_create_file(&client->dev, &dev_attr_alarms);
542 static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
543 {
544         struct w83781d_data *data = w83781d_update_device(dev);
545         return sprintf(buf, "%ld\n",
546                        (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
547 }
548 static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
549 {
550         struct w83781d_data *data = w83781d_update_device(dev);
551         return sprintf(buf, "%ld\n",
552                        (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
553 }
554
555 #define BEEP_ENABLE                     0       /* Store beep_enable */
556 #define BEEP_MASK                       1       /* Store beep_mask */
557
558 static ssize_t
559 store_beep_reg(struct device *dev, const char *buf, size_t count,
560                int update_mask)
561 {
562         struct i2c_client *client = to_i2c_client(dev);
563         struct w83781d_data *data = i2c_get_clientdata(client);
564         u32 val, val2;
565
566         val = simple_strtoul(buf, NULL, 10);
567
568         down(&data->update_lock);
569
570         if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
571                 data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
572                 w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
573                                     data->beep_mask & 0xff);
574
575                 if ((data->type != w83781d) && (data->type != as99127f)) {
576                         w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
577                                             ((data->beep_mask) >> 16) & 0xff);
578                 }
579
580                 val2 = (data->beep_mask >> 8) & 0x7f;
581         } else {                /* We are storing beep_enable */
582                 val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
583                 data->beep_enable = BEEP_ENABLE_TO_REG(val);
584         }
585
586         w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
587                             val2 | data->beep_enable << 7);
588
589         up(&data->update_lock);
590         return count;
591 }
592
593 #define sysfs_beep(REG, reg) \
594 static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
595 { \
596         return show_beep_##reg(dev, attr, buf); \
597 } \
598 static ssize_t store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
599 { \
600         return store_beep_reg(dev, buf, count, BEEP_##REG); \
601 } \
602 static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
603
604 sysfs_beep(ENABLE, enable);
605 sysfs_beep(MASK, mask);
606
607 #define device_create_file_beep(client) \
608 do { \
609 device_create_file(&client->dev, &dev_attr_beep_enable); \
610 device_create_file(&client->dev, &dev_attr_beep_mask); \
611 } while (0)
612
613 static ssize_t
614 show_fan_div_reg(struct device *dev, char *buf, int nr)
615 {
616         struct w83781d_data *data = w83781d_update_device(dev);
617         return sprintf(buf, "%ld\n",
618                        (long) DIV_FROM_REG(data->fan_div[nr - 1]));
619 }
620
621 /* Note: we save and restore the fan minimum here, because its value is
622    determined in part by the fan divisor.  This follows the principle of
623    least suprise; the user doesn't expect the fan minimum to change just
624    because the divisor changed. */
625 static ssize_t
626 store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
627 {
628         struct i2c_client *client = to_i2c_client(dev);
629         struct w83781d_data *data = i2c_get_clientdata(client);
630         unsigned long min;
631         u8 reg;
632         unsigned long val = simple_strtoul(buf, NULL, 10);
633
634         down(&data->update_lock);
635         
636         /* Save fan_min */
637         min = FAN_FROM_REG(data->fan_min[nr],
638                            DIV_FROM_REG(data->fan_div[nr]));
639
640         data->fan_div[nr] = DIV_TO_REG(val, data->type);
641
642         reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
643                & (nr==0 ? 0xcf : 0x3f))
644             | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
645         w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
646
647         /* w83781d and as99127f don't have extended divisor bits */
648         if (data->type != w83781d && data->type != as99127f) {
649                 reg = (w83781d_read_value(client, W83781D_REG_VBAT)
650                        & ~(1 << (5 + nr)))
651                     | ((data->fan_div[nr] & 0x04) << (3 + nr));
652                 w83781d_write_value(client, W83781D_REG_VBAT, reg);
653         }
654
655         /* Restore fan_min */
656         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
657         w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
658
659         up(&data->update_lock);
660         return count;
661 }
662
663 #define sysfs_fan_div(offset) \
664 static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
665 { \
666         return show_fan_div_reg(dev, buf, offset); \
667 } \
668 static ssize_t store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
669 { \
670         return store_fan_div_reg(dev, buf, count, offset - 1); \
671 } \
672 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
673
674 sysfs_fan_div(1);
675 sysfs_fan_div(2);
676 sysfs_fan_div(3);
677
678 #define device_create_file_fan_div(client, offset) \
679 do { \
680 device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
681 } while (0)
682
683 static ssize_t
684 show_pwm_reg(struct device *dev, char *buf, int nr)
685 {
686         struct w83781d_data *data = w83781d_update_device(dev);
687         return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
688 }
689
690 static ssize_t
691 show_pwmenable_reg(struct device *dev, char *buf, int nr)
692 {
693         struct w83781d_data *data = w83781d_update_device(dev);
694         return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
695 }
696
697 static ssize_t
698 store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
699 {
700         struct i2c_client *client = to_i2c_client(dev);
701         struct w83781d_data *data = i2c_get_clientdata(client);
702         u32 val;
703
704         val = simple_strtoul(buf, NULL, 10);
705
706         down(&data->update_lock);
707         data->pwm[nr - 1] = PWM_TO_REG(val);
708         w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
709         up(&data->update_lock);
710         return count;
711 }
712
713 static ssize_t
714 store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
715 {
716         struct i2c_client *client = to_i2c_client(dev);
717         struct w83781d_data *data = i2c_get_clientdata(client);
718         u32 val, reg;
719
720         val = simple_strtoul(buf, NULL, 10);
721
722         down(&data->update_lock);
723
724         switch (val) {
725         case 0:
726         case 1:
727                 reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
728                 w83781d_write_value(client, W83781D_REG_PWMCLK12,
729                                     (reg & 0xf7) | (val << 3));
730
731                 reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
732                 w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
733                                     (reg & 0xef) | (!val << 4));
734
735                 data->pwmenable[nr - 1] = val;
736                 break;
737
738         default:
739                 up(&data->update_lock);
740                 return -EINVAL;
741         }
742
743         up(&data->update_lock);
744         return count;
745 }
746
747 #define sysfs_pwm(offset) \
748 static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
749 { \
750         return show_pwm_reg(dev, buf, offset); \
751 } \
752 static ssize_t store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, \
753                 const char *buf, size_t count) \
754 { \
755         return store_pwm_reg(dev, buf, count, offset); \
756 } \
757 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
758                 show_regs_pwm_##offset, store_regs_pwm_##offset);
759
760 #define sysfs_pwmenable(offset) \
761 static ssize_t show_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
762 { \
763         return show_pwmenable_reg(dev, buf, offset); \
764 } \
765 static ssize_t store_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, \
766                 const char *buf, size_t count) \
767 { \
768         return store_pwmenable_reg(dev, buf, count, offset); \
769 } \
770 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
771                 show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
772
773 sysfs_pwm(1);
774 sysfs_pwm(2);
775 sysfs_pwmenable(2);             /* only PWM2 can be enabled/disabled */
776 sysfs_pwm(3);
777 sysfs_pwm(4);
778
779 #define device_create_file_pwm(client, offset) \
780 do { \
781 device_create_file(&client->dev, &dev_attr_pwm##offset); \
782 } while (0)
783
784 #define device_create_file_pwmenable(client, offset) \
785 do { \
786 device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
787 } while (0)
788
789 static ssize_t
790 show_sensor_reg(struct device *dev, char *buf, int nr)
791 {
792         struct w83781d_data *data = w83781d_update_device(dev);
793         return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
794 }
795
796 static ssize_t
797 store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
798 {
799         struct i2c_client *client = to_i2c_client(dev);
800         struct w83781d_data *data = i2c_get_clientdata(client);
801         u32 val, tmp;
802
803         val = simple_strtoul(buf, NULL, 10);
804
805         down(&data->update_lock);
806
807         switch (val) {
808         case 1:         /* PII/Celeron diode */
809                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
810                 w83781d_write_value(client, W83781D_REG_SCFG1,
811                                     tmp | BIT_SCFG1[nr - 1]);
812                 tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
813                 w83781d_write_value(client, W83781D_REG_SCFG2,
814                                     tmp | BIT_SCFG2[nr - 1]);
815                 data->sens[nr - 1] = val;
816                 break;
817         case 2:         /* 3904 */
818                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
819                 w83781d_write_value(client, W83781D_REG_SCFG1,
820                                     tmp | BIT_SCFG1[nr - 1]);
821                 tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
822                 w83781d_write_value(client, W83781D_REG_SCFG2,
823                                     tmp & ~BIT_SCFG2[nr - 1]);
824                 data->sens[nr - 1] = val;
825                 break;
826         case W83781D_DEFAULT_BETA:      /* thermistor */
827                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
828                 w83781d_write_value(client, W83781D_REG_SCFG1,
829                                     tmp & ~BIT_SCFG1[nr - 1]);
830                 data->sens[nr - 1] = val;
831                 break;
832         default:
833                 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
834                        (long) val, W83781D_DEFAULT_BETA);
835                 break;
836         }
837
838         up(&data->update_lock);
839         return count;
840 }
841
842 #define sysfs_sensor(offset) \
843 static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
844 { \
845     return show_sensor_reg(dev, buf, offset); \
846 } \
847 static ssize_t store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
848 { \
849     return store_sensor_reg(dev, buf, count, offset); \
850 } \
851 static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
852
853 sysfs_sensor(1);
854 sysfs_sensor(2);
855 sysfs_sensor(3);
856
857 #define device_create_file_sensor(client, offset) \
858 do { \
859 device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
860 } while (0)
861
862 /* This function is called when:
863      * w83781d_driver is inserted (when this module is loaded), for each
864        available adapter
865      * when a new adapter is inserted (and w83781d_driver is still present) */
866 static int
867 w83781d_attach_adapter(struct i2c_adapter *adapter)
868 {
869         if (!(adapter->class & I2C_CLASS_HWMON))
870                 return 0;
871         return i2c_probe(adapter, &addr_data, w83781d_detect);
872 }
873
874 static int
875 w83781d_isa_attach_adapter(struct i2c_adapter *adapter)
876 {
877         return w83781d_detect(adapter, isa_address, -1);
878 }
879
880 /* Assumes that adapter is of I2C, not ISA variety.
881  * OTHERWISE DON'T CALL THIS
882  */
883 static int
884 w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
885                 struct i2c_client *new_client)
886 {
887         int i, val1 = 0, id;
888         int err;
889         const char *client_name = "";
890         struct w83781d_data *data = i2c_get_clientdata(new_client);
891
892         data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
893         if (!(data->lm75[0])) {
894                 err = -ENOMEM;
895                 goto ERROR_SC_0;
896         }
897         memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
898
899         id = i2c_adapter_id(adapter);
900
901         if (force_subclients[0] == id && force_subclients[1] == address) {
902                 for (i = 2; i <= 3; i++) {
903                         if (force_subclients[i] < 0x48 ||
904                             force_subclients[i] > 0x4f) {
905                                 dev_err(&new_client->dev, "Invalid subclient "
906                                         "address %d; must be 0x48-0x4f\n",
907                                         force_subclients[i]);
908                                 err = -EINVAL;
909                                 goto ERROR_SC_1;
910                         }
911                 }
912                 w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
913                                 (force_subclients[2] & 0x07) |
914                                 ((force_subclients[3] & 0x07) << 4));
915                 data->lm75[0]->addr = force_subclients[2];
916         } else {
917                 val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
918                 data->lm75[0]->addr = 0x48 + (val1 & 0x07);
919         }
920
921         if (kind != w83783s) {
922
923                 data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
924                 if (!(data->lm75[1])) {
925                         err = -ENOMEM;
926                         goto ERROR_SC_1;
927                 }
928                 memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
929
930                 if (force_subclients[0] == id &&
931                     force_subclients[1] == address) {
932                         data->lm75[1]->addr = force_subclients[3];
933                 } else {
934                         data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
935                 }
936                 if (data->lm75[0]->addr == data->lm75[1]->addr) {
937                         dev_err(&new_client->dev,
938                                "Duplicate addresses 0x%x for subclients.\n",
939                                data->lm75[0]->addr);
940                         err = -EBUSY;
941                         goto ERROR_SC_2;
942                 }
943         }
944
945         if (kind == w83781d)
946                 client_name = "w83781d subclient";
947         else if (kind == w83782d)
948                 client_name = "w83782d subclient";
949         else if (kind == w83783s)
950                 client_name = "w83783s subclient";
951         else if (kind == w83627hf)
952                 client_name = "w83627hf subclient";
953         else if (kind == as99127f)
954                 client_name = "as99127f subclient";
955
956         for (i = 0; i <= 1; i++) {
957                 /* store all data in w83781d */
958                 i2c_set_clientdata(data->lm75[i], NULL);
959                 data->lm75[i]->adapter = adapter;
960                 data->lm75[i]->driver = &w83781d_driver;
961                 data->lm75[i]->flags = 0;
962                 strlcpy(data->lm75[i]->name, client_name,
963                         I2C_NAME_SIZE);
964                 if ((err = i2c_attach_client(data->lm75[i]))) {
965                         dev_err(&new_client->dev, "Subclient %d "
966                                 "registration at address 0x%x "
967                                 "failed.\n", i, data->lm75[i]->addr);
968                         if (i == 1)
969                                 goto ERROR_SC_3;
970                         goto ERROR_SC_2;
971                 }
972                 if (kind == w83783s)
973                         break;
974         }
975
976         return 0;
977
978 /* Undo inits in case of errors */
979 ERROR_SC_3:
980         i2c_detach_client(data->lm75[0]);
981 ERROR_SC_2:
982         if (data->lm75[1])
983                 kfree(data->lm75[1]);
984 ERROR_SC_1:
985         if (data->lm75[0])
986                 kfree(data->lm75[0]);
987 ERROR_SC_0:
988         return err;
989 }
990
991 static int
992 w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
993 {
994         int i = 0, val1 = 0, val2;
995         struct i2c_client *new_client;
996         struct w83781d_data *data;
997         int err;
998         const char *client_name = "";
999         int is_isa = i2c_is_isa_adapter(adapter);
1000         enum vendor { winbond, asus } vendid;
1001
1002         if (!is_isa
1003             && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1004                 err = -EINVAL;
1005                 goto ERROR0;
1006         }
1007
1008         /* Prevent users from forcing a kind for a bus it isn't supposed
1009            to possibly be on */
1010         if (is_isa && (kind == as99127f || kind == w83783s)) {
1011                 dev_err(&adapter->dev,
1012                         "Cannot force I2C-only chip for ISA address 0x%02x.\n",
1013                         address);
1014                 err = -EINVAL;
1015                 goto ERROR0;
1016         }
1017         
1018         if (is_isa)
1019                 if (!request_region(address, W83781D_EXTENT,
1020                                     w83781d_isa_driver.name)) {
1021                         dev_dbg(&adapter->dev, "Request of region "
1022                                 "0x%x-0x%x for w83781d failed\n", address,
1023                                 address + W83781D_EXTENT - 1);
1024                         err = -EBUSY;
1025                         goto ERROR0;
1026                 }
1027
1028         /* Probe whether there is anything available on this address. Already
1029            done for SMBus clients */
1030         if (kind < 0) {
1031                 if (is_isa) {
1032
1033 #define REALLY_SLOW_IO
1034                         /* We need the timeouts for at least some LM78-like
1035                            chips. But only if we read 'undefined' registers. */
1036                         i = inb_p(address + 1);
1037                         if (inb_p(address + 2) != i
1038                          || inb_p(address + 3) != i
1039                          || inb_p(address + 7) != i) {
1040                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1041                                         "chip failed at step 1\n");
1042                                 err = -ENODEV;
1043                                 goto ERROR1;
1044                         }
1045 #undef REALLY_SLOW_IO
1046
1047                         /* Let's just hope nothing breaks here */
1048                         i = inb_p(address + 5) & 0x7f;
1049                         outb_p(~i & 0x7f, address + 5);
1050                         val2 = inb_p(address + 5) & 0x7f;
1051                         if (val2 != (~i & 0x7f)) {
1052                                 outb_p(i, address + 5);
1053                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1054                                         "chip failed at step 2 (0x%x != "
1055                                         "0x%x at 0x%x)\n", val2, ~i & 0x7f,
1056                                         address + 5);
1057                                 err = -ENODEV;
1058                                 goto ERROR1;
1059                         }
1060                 }
1061         }
1062
1063         /* OK. For now, we presume we have a valid client. We now create the
1064            client structure, even though we cannot fill it completely yet.
1065            But it allows us to access w83781d_{read,write}_value. */
1066
1067         if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
1068                 err = -ENOMEM;
1069                 goto ERROR1;
1070         }
1071         memset(data, 0, sizeof(struct w83781d_data));
1072
1073         new_client = &data->client;
1074         i2c_set_clientdata(new_client, data);
1075         new_client->addr = address;
1076         init_MUTEX(&data->lock);
1077         new_client->adapter = adapter;
1078         new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
1079         new_client->flags = 0;
1080
1081         /* Now, we do the remaining detection. */
1082
1083         /* The w8378?d may be stuck in some other bank than bank 0. This may
1084            make reading other information impossible. Specify a force=... or
1085            force_*=... parameter, and the Winbond will be reset to the right
1086            bank. */
1087         if (kind < 0) {
1088                 if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
1089                         dev_dbg(&new_client->dev, "Detection failed at step "
1090                                 "3\n");
1091                         err = -ENODEV;
1092                         goto ERROR2;
1093                 }
1094                 val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
1095                 val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
1096                 /* Check for Winbond or Asus ID if in bank 0 */
1097                 if ((!(val1 & 0x07)) &&
1098                     (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
1099                      || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
1100                         dev_dbg(&new_client->dev, "Detection failed at step "
1101                                 "4\n");
1102                         err = -ENODEV;
1103                         goto ERROR2;
1104                 }
1105                 /* If Winbond SMBus, check address at 0x48.
1106                    Asus doesn't support, except for as99127f rev.2 */
1107                 if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
1108                                   ((val1 & 0x80) && (val2 == 0x5c)))) {
1109                         if (w83781d_read_value
1110                             (new_client, W83781D_REG_I2C_ADDR) != address) {
1111                                 dev_dbg(&new_client->dev, "Detection failed "
1112                                         "at step 5\n");
1113                                 err = -ENODEV;
1114                                 goto ERROR2;
1115                         }
1116                 }
1117         }
1118
1119         /* We have either had a force parameter, or we have already detected the
1120            Winbond. Put it now into bank 0 and Vendor ID High Byte */
1121         w83781d_write_value(new_client, W83781D_REG_BANK,
1122                             (w83781d_read_value(new_client,
1123                                                 W83781D_REG_BANK) & 0x78) |
1124                             0x80);
1125
1126         /* Determine the chip type. */
1127         if (kind <= 0) {
1128                 /* get vendor ID */
1129                 val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
1130                 if (val2 == 0x5c)
1131                         vendid = winbond;
1132                 else if (val2 == 0x12)
1133                         vendid = asus;
1134                 else {
1135                         dev_dbg(&new_client->dev, "Chip was made by neither "
1136                                 "Winbond nor Asus?\n");
1137                         err = -ENODEV;
1138                         goto ERROR2;
1139                 }
1140
1141                 val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
1142                 if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1143                         kind = w83781d;
1144                 else if (val1 == 0x30 && vendid == winbond)
1145                         kind = w83782d;
1146                 else if (val1 == 0x40 && vendid == winbond && !is_isa
1147                                 && address == 0x2d)
1148                         kind = w83783s;
1149                 else if (val1 == 0x21 && vendid == winbond)
1150                         kind = w83627hf;
1151                 else if (val1 == 0x31 && !is_isa && address >= 0x28)
1152                         kind = as99127f;
1153                 else {
1154                         if (kind == 0)
1155                                 dev_warn(&new_client->dev, "Ignoring 'force' "
1156                                          "parameter for unknown chip at "
1157                                          "adapter %d, address 0x%02x\n",
1158                                          i2c_adapter_id(adapter), address);
1159                         err = -EINVAL;
1160                         goto ERROR2;
1161                 }
1162         }
1163
1164         if (kind == w83781d) {
1165                 client_name = "w83781d";
1166         } else if (kind == w83782d) {
1167                 client_name = "w83782d";
1168         } else if (kind == w83783s) {
1169                 client_name = "w83783s";
1170         } else if (kind == w83627hf) {
1171                 client_name = "w83627hf";
1172         } else if (kind == as99127f) {
1173                 client_name = "as99127f";
1174         }
1175
1176         /* Fill in the remaining client fields and put into the global list */
1177         strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
1178         data->type = kind;
1179
1180         data->valid = 0;
1181         init_MUTEX(&data->update_lock);
1182
1183         /* Tell the I2C layer a new client has arrived */
1184         if ((err = i2c_attach_client(new_client)))
1185                 goto ERROR2;
1186
1187         /* attach secondary i2c lm75-like clients */
1188         if (!is_isa) {
1189                 if ((err = w83781d_detect_subclients(adapter, address,
1190                                 kind, new_client)))
1191                         goto ERROR3;
1192         } else {
1193                 data->lm75[0] = NULL;
1194                 data->lm75[1] = NULL;
1195         }
1196
1197         /* Initialize the chip */
1198         w83781d_init_client(new_client);
1199
1200         /* A few vars need to be filled upon startup */
1201         for (i = 1; i <= 3; i++) {
1202                 data->fan_min[i - 1] = w83781d_read_value(new_client,
1203                                         W83781D_REG_FAN_MIN(i));
1204         }
1205         if (kind != w83781d && kind != as99127f)
1206                 for (i = 0; i < 4; i++)
1207                         data->pwmenable[i] = 1;
1208
1209         /* Register sysfs hooks */
1210         data->class_dev = hwmon_device_register(&new_client->dev);
1211         if (IS_ERR(data->class_dev)) {
1212                 err = PTR_ERR(data->class_dev);
1213                 goto ERROR4;
1214         }
1215
1216         device_create_file_in(new_client, 0);
1217         if (kind != w83783s)
1218                 device_create_file_in(new_client, 1);
1219         device_create_file_in(new_client, 2);
1220         device_create_file_in(new_client, 3);
1221         device_create_file_in(new_client, 4);
1222         device_create_file_in(new_client, 5);
1223         device_create_file_in(new_client, 6);
1224         if (kind != as99127f && kind != w83781d && kind != w83783s) {
1225                 device_create_file_in(new_client, 7);
1226                 device_create_file_in(new_client, 8);
1227         }
1228
1229         device_create_file_fan(new_client, 1);
1230         device_create_file_fan(new_client, 2);
1231         device_create_file_fan(new_client, 3);
1232
1233         device_create_file_temp(new_client, 1);
1234         device_create_file_temp(new_client, 2);
1235         if (kind != w83783s)
1236                 device_create_file_temp(new_client, 3);
1237
1238         device_create_file_vid(new_client);
1239         device_create_file_vrm(new_client);
1240
1241         device_create_file_fan_div(new_client, 1);
1242         device_create_file_fan_div(new_client, 2);
1243         device_create_file_fan_div(new_client, 3);
1244
1245         device_create_file_alarms(new_client);
1246
1247         device_create_file_beep(new_client);
1248
1249         if (kind != w83781d && kind != as99127f) {
1250                 device_create_file_pwm(new_client, 1);
1251                 device_create_file_pwm(new_client, 2);
1252                 device_create_file_pwmenable(new_client, 2);
1253         }
1254         if (kind == w83782d && !is_isa) {
1255                 device_create_file_pwm(new_client, 3);
1256                 device_create_file_pwm(new_client, 4);
1257         }
1258
1259         if (kind != as99127f && kind != w83781d) {
1260                 device_create_file_sensor(new_client, 1);
1261                 device_create_file_sensor(new_client, 2);
1262                 if (kind != w83783s)
1263                         device_create_file_sensor(new_client, 3);
1264         }
1265
1266         return 0;
1267
1268 ERROR4:
1269         if (data->lm75[1]) {
1270                 i2c_detach_client(data->lm75[1]);
1271                 kfree(data->lm75[1]);
1272         }
1273         if (data->lm75[0]) {
1274                 i2c_detach_client(data->lm75[0]);
1275                 kfree(data->lm75[0]);
1276         }
1277 ERROR3:
1278         i2c_detach_client(new_client);
1279 ERROR2:
1280         kfree(data);
1281 ERROR1:
1282         if (is_isa)
1283                 release_region(address, W83781D_EXTENT);
1284 ERROR0:
1285         return err;
1286 }
1287
1288 static int
1289 w83781d_detach_client(struct i2c_client *client)
1290 {
1291         struct w83781d_data *data = i2c_get_clientdata(client);
1292         int err;
1293
1294         /* main client */
1295         if (data)
1296                 hwmon_device_unregister(data->class_dev);
1297
1298         if (i2c_is_isa_client(client))
1299                 release_region(client->addr, W83781D_EXTENT);
1300
1301         if ((err = i2c_detach_client(client)))
1302                 return err;
1303
1304         /* main client */
1305         if (data)
1306                 kfree(data);
1307
1308         /* subclient */
1309         else
1310                 kfree(client);
1311
1312         return 0;
1313 }
1314
1315 /* The SMBus locks itself, usually, but nothing may access the Winbond between
1316    bank switches. ISA access must always be locked explicitly! 
1317    We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1318    would slow down the W83781D access and should not be necessary. 
1319    There are some ugly typecasts here, but the good news is - they should
1320    nowhere else be necessary! */
1321 static int
1322 w83781d_read_value(struct i2c_client *client, u16 reg)
1323 {
1324         struct w83781d_data *data = i2c_get_clientdata(client);
1325         int res, word_sized, bank;
1326         struct i2c_client *cl;
1327
1328         down(&data->lock);
1329         if (i2c_is_isa_client(client)) {
1330                 word_sized = (((reg & 0xff00) == 0x100)
1331                               || ((reg & 0xff00) == 0x200))
1332                     && (((reg & 0x00ff) == 0x50)
1333                         || ((reg & 0x00ff) == 0x53)
1334                         || ((reg & 0x00ff) == 0x55));
1335                 if (reg & 0xff00) {
1336                         outb_p(W83781D_REG_BANK,
1337                                client->addr + W83781D_ADDR_REG_OFFSET);
1338                         outb_p(reg >> 8,
1339                                client->addr + W83781D_DATA_REG_OFFSET);
1340                 }
1341                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1342                 res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
1343                 if (word_sized) {
1344                         outb_p((reg & 0xff) + 1,
1345                                client->addr + W83781D_ADDR_REG_OFFSET);
1346                         res =
1347                             (res << 8) + inb_p(client->addr +
1348                                                W83781D_DATA_REG_OFFSET);
1349                 }
1350                 if (reg & 0xff00) {
1351                         outb_p(W83781D_REG_BANK,
1352                                client->addr + W83781D_ADDR_REG_OFFSET);
1353                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1354                 }
1355         } else {
1356                 bank = (reg >> 8) & 0x0f;
1357                 if (bank > 2)
1358                         /* switch banks */
1359                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1360                                                   bank);
1361                 if (bank == 0 || bank > 2) {
1362                         res = i2c_smbus_read_byte_data(client, reg & 0xff);
1363                 } else {
1364                         /* switch to subclient */
1365                         cl = data->lm75[bank - 1];
1366                         /* convert from ISA to LM75 I2C addresses */
1367                         switch (reg & 0xff) {
1368                         case 0x50:      /* TEMP */
1369                                 res = swab16(i2c_smbus_read_word_data(cl, 0));
1370                                 break;
1371                         case 0x52:      /* CONFIG */
1372                                 res = i2c_smbus_read_byte_data(cl, 1);
1373                                 break;
1374                         case 0x53:      /* HYST */
1375                                 res = swab16(i2c_smbus_read_word_data(cl, 2));
1376                                 break;
1377                         case 0x55:      /* OVER */
1378                         default:
1379                                 res = swab16(i2c_smbus_read_word_data(cl, 3));
1380                                 break;
1381                         }
1382                 }
1383                 if (bank > 2)
1384                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1385         }
1386         up(&data->lock);
1387         return res;
1388 }
1389
1390 static int
1391 w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
1392 {
1393         struct w83781d_data *data = i2c_get_clientdata(client);
1394         int word_sized, bank;
1395         struct i2c_client *cl;
1396
1397         down(&data->lock);
1398         if (i2c_is_isa_client(client)) {
1399                 word_sized = (((reg & 0xff00) == 0x100)
1400                               || ((reg & 0xff00) == 0x200))
1401                     && (((reg & 0x00ff) == 0x53)
1402                         || ((reg & 0x00ff) == 0x55));
1403                 if (reg & 0xff00) {
1404                         outb_p(W83781D_REG_BANK,
1405                                client->addr + W83781D_ADDR_REG_OFFSET);
1406                         outb_p(reg >> 8,
1407                                client->addr + W83781D_DATA_REG_OFFSET);
1408                 }
1409                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1410                 if (word_sized) {
1411                         outb_p(value >> 8,
1412                                client->addr + W83781D_DATA_REG_OFFSET);
1413                         outb_p((reg & 0xff) + 1,
1414                                client->addr + W83781D_ADDR_REG_OFFSET);
1415                 }
1416                 outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
1417                 if (reg & 0xff00) {
1418                         outb_p(W83781D_REG_BANK,
1419                                client->addr + W83781D_ADDR_REG_OFFSET);
1420                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1421                 }
1422         } else {
1423                 bank = (reg >> 8) & 0x0f;
1424                 if (bank > 2)
1425                         /* switch banks */
1426                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1427                                                   bank);
1428                 if (bank == 0 || bank > 2) {
1429                         i2c_smbus_write_byte_data(client, reg & 0xff,
1430                                                   value & 0xff);
1431                 } else {
1432                         /* switch to subclient */
1433                         cl = data->lm75[bank - 1];
1434                         /* convert from ISA to LM75 I2C addresses */
1435                         switch (reg & 0xff) {
1436                         case 0x52:      /* CONFIG */
1437                                 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1438                                 break;
1439                         case 0x53:      /* HYST */
1440                                 i2c_smbus_write_word_data(cl, 2, swab16(value));
1441                                 break;
1442                         case 0x55:      /* OVER */
1443                                 i2c_smbus_write_word_data(cl, 3, swab16(value));
1444                                 break;
1445                         }
1446                 }
1447                 if (bank > 2)
1448                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1449         }
1450         up(&data->lock);
1451         return 0;
1452 }
1453
1454 static void
1455 w83781d_init_client(struct i2c_client *client)
1456 {
1457         struct w83781d_data *data = i2c_get_clientdata(client);
1458         int i, p;
1459         int type = data->type;
1460         u8 tmp;
1461
1462         if (init && type != as99127f) { /* this resets registers we don't have
1463                                            documentation for on the as99127f */
1464                 /* save these registers */
1465                 i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
1466                 p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
1467                 /* Reset all except Watchdog values and last conversion values
1468                    This sets fan-divs to 2, among others */
1469                 w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
1470                 /* Restore the registers and disable power-on abnormal beep.
1471                    This saves FAN 1/2/3 input/output values set by BIOS. */
1472                 w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
1473                 w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
1474                 /* Disable master beep-enable (reset turns it on).
1475                    Individual beep_mask should be reset to off but for some reason
1476                    disabling this bit helps some people not get beeped */
1477                 w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
1478         }
1479
1480         data->vrm = vid_which_vrm();
1481
1482         if ((type != w83781d) && (type != as99127f)) {
1483                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
1484                 for (i = 1; i <= 3; i++) {
1485                         if (!(tmp & BIT_SCFG1[i - 1])) {
1486                                 data->sens[i - 1] = W83781D_DEFAULT_BETA;
1487                         } else {
1488                                 if (w83781d_read_value
1489                                     (client,
1490                                      W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1491                                         data->sens[i - 1] = 1;
1492                                 else
1493                                         data->sens[i - 1] = 2;
1494                         }
1495                         if (type == w83783s && i == 2)
1496                                 break;
1497                 }
1498         }
1499
1500         if (init && type != as99127f) {
1501                 /* Enable temp2 */
1502                 tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
1503                 if (tmp & 0x01) {
1504                         dev_warn(&client->dev, "Enabling temp2, readings "
1505                                  "might not make sense\n");
1506                         w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
1507                                 tmp & 0xfe);
1508                 }
1509
1510                 /* Enable temp3 */
1511                 if (type != w83783s) {
1512                         tmp = w83781d_read_value(client,
1513                                 W83781D_REG_TEMP3_CONFIG);
1514                         if (tmp & 0x01) {
1515                                 dev_warn(&client->dev, "Enabling temp3, "
1516                                          "readings might not make sense\n");
1517                                 w83781d_write_value(client,
1518                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1519                         }
1520                 }
1521
1522                 if (type != w83781d) {
1523                         /* enable comparator mode for temp2 and temp3 so
1524                            alarm indication will work correctly */
1525                         i = w83781d_read_value(client, W83781D_REG_IRQ);
1526                         if (!(i & 0x40))
1527                                 w83781d_write_value(client, W83781D_REG_IRQ,
1528                                                     i | 0x40);
1529                 }
1530         }
1531
1532         /* Start monitoring */
1533         w83781d_write_value(client, W83781D_REG_CONFIG,
1534                             (w83781d_read_value(client,
1535                                                 W83781D_REG_CONFIG) & 0xf7)
1536                             | 0x01);
1537 }
1538
1539 static struct w83781d_data *w83781d_update_device(struct device *dev)
1540 {
1541         struct i2c_client *client = to_i2c_client(dev);
1542         struct w83781d_data *data = i2c_get_clientdata(client);
1543         int i;
1544
1545         down(&data->update_lock);
1546
1547         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1548             || !data->valid) {
1549                 dev_dbg(dev, "Starting device update\n");
1550
1551                 for (i = 0; i <= 8; i++) {
1552                         if (data->type == w83783s && i == 1)
1553                                 continue;       /* 783S has no in1 */
1554                         data->in[i] =
1555                             w83781d_read_value(client, W83781D_REG_IN(i));
1556                         data->in_min[i] =
1557                             w83781d_read_value(client, W83781D_REG_IN_MIN(i));
1558                         data->in_max[i] =
1559                             w83781d_read_value(client, W83781D_REG_IN_MAX(i));
1560                         if ((data->type != w83782d)
1561                             && (data->type != w83627hf) && (i == 6))
1562                                 break;
1563                 }
1564                 for (i = 1; i <= 3; i++) {
1565                         data->fan[i - 1] =
1566                             w83781d_read_value(client, W83781D_REG_FAN(i));
1567                         data->fan_min[i - 1] =
1568                             w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
1569                 }
1570                 if (data->type != w83781d && data->type != as99127f) {
1571                         for (i = 1; i <= 4; i++) {
1572                                 data->pwm[i - 1] =
1573                                     w83781d_read_value(client,
1574                                                        W83781D_REG_PWM(i));
1575                                 if ((data->type != w83782d
1576                                      || i2c_is_isa_client(client))
1577                                     && i == 2)
1578                                         break;
1579                         }
1580                         /* Only PWM2 can be disabled */
1581                         data->pwmenable[1] = (w83781d_read_value(client,
1582                                               W83781D_REG_PWMCLK12) & 0x08) >> 3;
1583                 }
1584
1585                 data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
1586                 data->temp_max =
1587                     w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
1588                 data->temp_max_hyst =
1589                     w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
1590                 data->temp_add[0] =
1591                     w83781d_read_value(client, W83781D_REG_TEMP(2));
1592                 data->temp_max_add[0] =
1593                     w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
1594                 data->temp_max_hyst_add[0] =
1595                     w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
1596                 if (data->type != w83783s) {
1597                         data->temp_add[1] =
1598                             w83781d_read_value(client, W83781D_REG_TEMP(3));
1599                         data->temp_max_add[1] =
1600                             w83781d_read_value(client,
1601                                                W83781D_REG_TEMP_OVER(3));
1602                         data->temp_max_hyst_add[1] =
1603                             w83781d_read_value(client,
1604                                                W83781D_REG_TEMP_HYST(3));
1605                 }
1606                 i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
1607                 data->vid = i & 0x0f;
1608                 data->vid |= (w83781d_read_value(client,
1609                                         W83781D_REG_CHIPID) & 0x01) << 4;
1610                 data->fan_div[0] = (i >> 4) & 0x03;
1611                 data->fan_div[1] = (i >> 6) & 0x03;
1612                 data->fan_div[2] = (w83781d_read_value(client,
1613                                         W83781D_REG_PIN) >> 6) & 0x03;
1614                 if ((data->type != w83781d) && (data->type != as99127f)) {
1615                         i = w83781d_read_value(client, W83781D_REG_VBAT);
1616                         data->fan_div[0] |= (i >> 3) & 0x04;
1617                         data->fan_div[1] |= (i >> 4) & 0x04;
1618                         data->fan_div[2] |= (i >> 5) & 0x04;
1619                 }
1620                 data->alarms =
1621                     w83781d_read_value(client,
1622                                        W83781D_REG_ALARM1) +
1623                     (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
1624                 if ((data->type == w83782d) || (data->type == w83627hf)) {
1625                         data->alarms |=
1626                             w83781d_read_value(client,
1627                                                W83781D_REG_ALARM3) << 16;
1628                 }
1629                 i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
1630                 data->beep_enable = i >> 7;
1631                 data->beep_mask = ((i & 0x7f) << 8) +
1632                     w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
1633                 if ((data->type != w83781d) && (data->type != as99127f)) {
1634                         data->beep_mask |=
1635                             w83781d_read_value(client,
1636                                                W83781D_REG_BEEP_INTS3) << 16;
1637                 }
1638                 data->last_updated = jiffies;
1639                 data->valid = 1;
1640         }
1641
1642         up(&data->update_lock);
1643
1644         return data;
1645 }
1646
1647 static int __init
1648 sensors_w83781d_init(void)
1649 {
1650         int res;
1651
1652         res = i2c_add_driver(&w83781d_driver);
1653         if (res)
1654                 return res;
1655
1656         res = i2c_isa_add_driver(&w83781d_isa_driver);
1657         if (res) {
1658                 i2c_del_driver(&w83781d_driver);
1659                 return res;
1660         }
1661
1662         return 0;
1663 }
1664
1665 static void __exit
1666 sensors_w83781d_exit(void)
1667 {
1668         i2c_isa_del_driver(&w83781d_isa_driver);
1669         i2c_del_driver(&w83781d_driver);
1670 }
1671
1672 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1673               "Philip Edelbrock <phil@netroedge.com>, "
1674               "and Mark Studebaker <mdsxyz123@yahoo.com>");
1675 MODULE_DESCRIPTION("W83781D driver");
1676 MODULE_LICENSE("GPL");
1677
1678 module_init(sensors_w83781d_init);
1679 module_exit(sensors_w83781d_exit);