ide-floppy: start DMA engine in idefloppy_transfer_pc1()
[linux-2.6.git] / drivers / edac / e752x_edac.c
1 /*
2  * Intel e752x Memory Controller kernel module
3  * (C) 2004 Linux Networx (http://lnxi.com)
4  * This file may be distributed under the terms of the
5  * GNU General Public License.
6  *
7  * See "enum e752x_chips" below for supported chipsets
8  *
9  * Written by Tom Zimmerman
10  *
11  * Contributors:
12  *      Thayne Harbaugh at realmsys.com (?)
13  *      Wang Zhenyu at intel.com
14  *      Dave Jiang at mvista.com
15  *
16  * $Id: edac_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
17  *
18  */
19
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/pci.h>
23 #include <linux/pci_ids.h>
24 #include <linux/slab.h>
25 #include <linux/edac.h>
26 #include "edac_core.h"
27
28 #define E752X_REVISION  " Ver: 2.0.2 " __DATE__
29 #define EDAC_MOD_STR    "e752x_edac"
30
31 static int force_function_unhide;
32 static int sysbus_parity = -1;
33
34 static struct edac_pci_ctl_info *e752x_pci;
35
36 #define e752x_printk(level, fmt, arg...) \
37         edac_printk(level, "e752x", fmt, ##arg)
38
39 #define e752x_mc_printk(mci, level, fmt, arg...) \
40         edac_mc_chipset_printk(mci, level, "e752x", fmt, ##arg)
41
42 #ifndef PCI_DEVICE_ID_INTEL_7520_0
43 #define PCI_DEVICE_ID_INTEL_7520_0      0x3590
44 #endif                          /* PCI_DEVICE_ID_INTEL_7520_0      */
45
46 #ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR
47 #define PCI_DEVICE_ID_INTEL_7520_1_ERR  0x3591
48 #endif                          /* PCI_DEVICE_ID_INTEL_7520_1_ERR  */
49
50 #ifndef PCI_DEVICE_ID_INTEL_7525_0
51 #define PCI_DEVICE_ID_INTEL_7525_0      0x359E
52 #endif                          /* PCI_DEVICE_ID_INTEL_7525_0      */
53
54 #ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR
55 #define PCI_DEVICE_ID_INTEL_7525_1_ERR  0x3593
56 #endif                          /* PCI_DEVICE_ID_INTEL_7525_1_ERR  */
57
58 #ifndef PCI_DEVICE_ID_INTEL_7320_0
59 #define PCI_DEVICE_ID_INTEL_7320_0      0x3592
60 #endif                          /* PCI_DEVICE_ID_INTEL_7320_0 */
61
62 #ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR
63 #define PCI_DEVICE_ID_INTEL_7320_1_ERR  0x3593
64 #endif                          /* PCI_DEVICE_ID_INTEL_7320_1_ERR */
65
66 #ifndef PCI_DEVICE_ID_INTEL_3100_0
67 #define PCI_DEVICE_ID_INTEL_3100_0      0x35B0
68 #endif                          /* PCI_DEVICE_ID_INTEL_3100_0 */
69
70 #ifndef PCI_DEVICE_ID_INTEL_3100_1_ERR
71 #define PCI_DEVICE_ID_INTEL_3100_1_ERR  0x35B1
72 #endif                          /* PCI_DEVICE_ID_INTEL_3100_1_ERR */
73
74 #define E752X_NR_CSROWS         8       /* number of csrows */
75
76 /* E752X register addresses - device 0 function 0 */
77 #define E752X_DRB               0x60    /* DRAM row boundary register (8b) */
78 #define E752X_DRA               0x70    /* DRAM row attribute register (8b) */
79                                         /*
80                                          * 31:30   Device width row 7
81                                          *      01=x8 10=x4 11=x8 DDR2
82                                          * 27:26   Device width row 6
83                                          * 23:22   Device width row 5
84                                          * 19:20   Device width row 4
85                                          * 15:14   Device width row 3
86                                          * 11:10   Device width row 2
87                                          *  7:6    Device width row 1
88                                          *  3:2    Device width row 0
89                                          */
90 #define E752X_DRC               0x7C    /* DRAM controller mode reg (32b) */
91                                         /* FIXME:IS THIS RIGHT? */
92                                         /*
93                                          * 22    Number channels 0=1,1=2
94                                          * 19:18 DRB Granularity 32/64MB
95                                          */
96 #define E752X_DRM               0x80    /* Dimm mapping register */
97 #define E752X_DDRCSR            0x9A    /* DDR control and status reg (16b) */
98                                         /*
99                                          * 14:12 1 single A, 2 single B, 3 dual
100                                          */
101 #define E752X_TOLM              0xC4    /* DRAM top of low memory reg (16b) */
102 #define E752X_REMAPBASE         0xC6    /* DRAM remap base address reg (16b) */
103 #define E752X_REMAPLIMIT        0xC8    /* DRAM remap limit address reg (16b) */
104 #define E752X_REMAPOFFSET       0xCA    /* DRAM remap limit offset reg (16b) */
105
106 /* E752X register addresses - device 0 function 1 */
107 #define E752X_FERR_GLOBAL       0x40    /* Global first error register (32b) */
108 #define E752X_NERR_GLOBAL       0x44    /* Global next error register (32b) */
109 #define E752X_HI_FERR           0x50    /* Hub interface first error reg (8b) */
110 #define E752X_HI_NERR           0x52    /* Hub interface next error reg (8b) */
111 #define E752X_HI_ERRMASK        0x54    /* Hub interface error mask reg (8b) */
112 #define E752X_HI_SMICMD         0x5A    /* Hub interface SMI command reg (8b) */
113 #define E752X_SYSBUS_FERR       0x60    /* System buss first error reg (16b) */
114 #define E752X_SYSBUS_NERR       0x62    /* System buss next error reg (16b) */
115 #define E752X_SYSBUS_ERRMASK    0x64    /* System buss error mask reg (16b) */
116 #define E752X_SYSBUS_SMICMD     0x6A    /* System buss SMI command reg (16b) */
117 #define E752X_BUF_FERR          0x70    /* Memory buffer first error reg (8b) */
118 #define E752X_BUF_NERR          0x72    /* Memory buffer next error reg (8b) */
119 #define E752X_BUF_ERRMASK       0x74    /* Memory buffer error mask reg (8b) */
120 #define E752X_BUF_SMICMD        0x7A    /* Memory buffer SMI command reg (8b) */
121 #define E752X_DRAM_FERR         0x80    /* DRAM first error register (16b) */
122 #define E752X_DRAM_NERR         0x82    /* DRAM next error register (16b) */
123 #define E752X_DRAM_ERRMASK      0x84    /* DRAM error mask register (8b) */
124 #define E752X_DRAM_SMICMD       0x8A    /* DRAM SMI command register (8b) */
125 #define E752X_DRAM_RETR_ADD     0xAC    /* DRAM Retry address register (32b) */
126 #define E752X_DRAM_SEC1_ADD     0xA0    /* DRAM first correctable memory */
127                                         /*     error address register (32b) */
128                                         /*
129                                          * 31    Reserved
130                                          * 30:2  CE address (64 byte block 34:6)
131                                          * 1     Reserved
132                                          * 0     HiLoCS
133                                          */
134 #define E752X_DRAM_SEC2_ADD     0xC8    /* DRAM first correctable memory */
135                                         /*     error address register (32b) */
136                                         /*
137                                          * 31    Reserved
138                                          * 30:2  CE address (64 byte block 34:6)
139                                          * 1     Reserved
140                                          * 0     HiLoCS
141                                          */
142 #define E752X_DRAM_DED_ADD      0xA4    /* DRAM first uncorrectable memory */
143                                         /*     error address register (32b) */
144                                         /*
145                                          * 31    Reserved
146                                          * 30:2  CE address (64 byte block 34:6)
147                                          * 1     Reserved
148                                          * 0     HiLoCS
149                                          */
150 #define E752X_DRAM_SCRB_ADD     0xA8    /* DRAM first uncorrectable scrub memory */
151                                         /*     error address register (32b) */
152                                         /*
153                                          * 31    Reserved
154                                          * 30:2  CE address (64 byte block 34:6)
155                                          * 1     Reserved
156                                          * 0     HiLoCS
157                                          */
158 #define E752X_DRAM_SEC1_SYNDROME 0xC4   /* DRAM first correctable memory */
159                                         /*     error syndrome register (16b) */
160 #define E752X_DRAM_SEC2_SYNDROME 0xC6   /* DRAM second correctable memory */
161                                         /*     error syndrome register (16b) */
162 #define E752X_DEVPRES1          0xF4    /* Device Present 1 register (8b) */
163
164 /* 3100 IMCH specific register addresses - device 0 function 1 */
165 #define I3100_NSI_FERR          0x48    /* NSI first error reg (32b) */
166 #define I3100_NSI_NERR          0x4C    /* NSI next error reg (32b) */
167 #define I3100_NSI_SMICMD        0x54    /* NSI SMI command register (32b) */
168 #define I3100_NSI_EMASK         0x90    /* NSI error mask register (32b) */
169
170 /* ICH5R register addresses - device 30 function 0 */
171 #define ICH5R_PCI_STAT          0x06    /* PCI status register (16b) */
172 #define ICH5R_PCI_2ND_STAT      0x1E    /* PCI status secondary reg (16b) */
173 #define ICH5R_PCI_BRIDGE_CTL    0x3E    /* PCI bridge control register (16b) */
174
175 enum e752x_chips {
176         E7520 = 0,
177         E7525 = 1,
178         E7320 = 2,
179         I3100 = 3
180 };
181
182 struct e752x_pvt {
183         struct pci_dev *bridge_ck;
184         struct pci_dev *dev_d0f0;
185         struct pci_dev *dev_d0f1;
186         u32 tolm;
187         u32 remapbase;
188         u32 remaplimit;
189         int mc_symmetric;
190         u8 map[8];
191         int map_type;
192         const struct e752x_dev_info *dev_info;
193 };
194
195 struct e752x_dev_info {
196         u16 err_dev;
197         u16 ctl_dev;
198         const char *ctl_name;
199 };
200
201 struct e752x_error_info {
202         u32 ferr_global;
203         u32 nerr_global;
204         u32 nsi_ferr;   /* 3100 only */
205         u32 nsi_nerr;   /* 3100 only */
206         u8 hi_ferr;     /* all but 3100 */
207         u8 hi_nerr;     /* all but 3100 */
208         u16 sysbus_ferr;
209         u16 sysbus_nerr;
210         u8 buf_ferr;
211         u8 buf_nerr;
212         u16 dram_ferr;
213         u16 dram_nerr;
214         u32 dram_sec1_add;
215         u32 dram_sec2_add;
216         u16 dram_sec1_syndrome;
217         u16 dram_sec2_syndrome;
218         u32 dram_ded_add;
219         u32 dram_scrb_add;
220         u32 dram_retr_add;
221 };
222
223 static const struct e752x_dev_info e752x_devs[] = {
224         [E7520] = {
225                 .err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR,
226                 .ctl_dev = PCI_DEVICE_ID_INTEL_7520_0,
227                 .ctl_name = "E7520"},
228         [E7525] = {
229                 .err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR,
230                 .ctl_dev = PCI_DEVICE_ID_INTEL_7525_0,
231                 .ctl_name = "E7525"},
232         [E7320] = {
233                 .err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR,
234                 .ctl_dev = PCI_DEVICE_ID_INTEL_7320_0,
235                 .ctl_name = "E7320"},
236         [I3100] = {
237                 .err_dev = PCI_DEVICE_ID_INTEL_3100_1_ERR,
238                 .ctl_dev = PCI_DEVICE_ID_INTEL_3100_0,
239                 .ctl_name = "3100"},
240 };
241
242 static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
243                                 unsigned long page)
244 {
245         u32 remap;
246         struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
247
248         debugf3("%s()\n", __func__);
249
250         if (page < pvt->tolm)
251                 return page;
252
253         if ((page >= 0x100000) && (page < pvt->remapbase))
254                 return page;
255
256         remap = (page - pvt->tolm) + pvt->remapbase;
257
258         if (remap < pvt->remaplimit)
259                 return remap;
260
261         e752x_printk(KERN_ERR, "Invalid page %lx - out of range\n", page);
262         return pvt->tolm - 1;
263 }
264
265 static void do_process_ce(struct mem_ctl_info *mci, u16 error_one,
266                         u32 sec1_add, u16 sec1_syndrome)
267 {
268         u32 page;
269         int row;
270         int channel;
271         int i;
272         struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
273
274         debugf3("%s()\n", __func__);
275
276         /* convert the addr to 4k page */
277         page = sec1_add >> (PAGE_SHIFT - 4);
278
279         /* FIXME - check for -1 */
280         if (pvt->mc_symmetric) {
281                 /* chip select are bits 14 & 13 */
282                 row = ((page >> 1) & 3);
283                 e752x_printk(KERN_WARNING,
284                         "Test row %d Table %d %d %d %d %d %d %d %d\n", row,
285                         pvt->map[0], pvt->map[1], pvt->map[2], pvt->map[3],
286                         pvt->map[4], pvt->map[5], pvt->map[6],
287                         pvt->map[7]);
288
289                 /* test for channel remapping */
290                 for (i = 0; i < 8; i++) {
291                         if (pvt->map[i] == row)
292                                 break;
293                 }
294
295                 e752x_printk(KERN_WARNING, "Test computed row %d\n", i);
296
297                 if (i < 8)
298                         row = i;
299                 else
300                         e752x_mc_printk(mci, KERN_WARNING,
301                                         "row %d not found in remap table\n",
302                                         row);
303         } else
304                 row = edac_mc_find_csrow_by_page(mci, page);
305
306         /* 0 = channel A, 1 = channel B */
307         channel = !(error_one & 1);
308
309         /* e752x mc reads 34:6 of the DRAM linear address */
310         edac_mc_handle_ce(mci, page, offset_in_page(sec1_add << 4),
311                         sec1_syndrome, row, channel, "e752x CE");
312 }
313
314 static inline void process_ce(struct mem_ctl_info *mci, u16 error_one,
315                         u32 sec1_add, u16 sec1_syndrome, int *error_found,
316                         int handle_error)
317 {
318         *error_found = 1;
319
320         if (handle_error)
321                 do_process_ce(mci, error_one, sec1_add, sec1_syndrome);
322 }
323
324 static void do_process_ue(struct mem_ctl_info *mci, u16 error_one,
325                         u32 ded_add, u32 scrb_add)
326 {
327         u32 error_2b, block_page;
328         int row;
329         struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
330
331         debugf3("%s()\n", __func__);
332
333         if (error_one & 0x0202) {
334                 error_2b = ded_add;
335
336                 /* convert to 4k address */
337                 block_page = error_2b >> (PAGE_SHIFT - 4);
338
339                 row = pvt->mc_symmetric ?
340                 /* chip select are bits 14 & 13 */
341                         ((block_page >> 1) & 3) :
342                         edac_mc_find_csrow_by_page(mci, block_page);
343
344                 /* e752x mc reads 34:6 of the DRAM linear address */
345                 edac_mc_handle_ue(mci, block_page,
346                                 offset_in_page(error_2b << 4),
347                                 row, "e752x UE from Read");
348         }
349         if (error_one & 0x0404) {
350                 error_2b = scrb_add;
351
352                 /* convert to 4k address */
353                 block_page = error_2b >> (PAGE_SHIFT - 4);
354
355                 row = pvt->mc_symmetric ?
356                 /* chip select are bits 14 & 13 */
357                         ((block_page >> 1) & 3) :
358                         edac_mc_find_csrow_by_page(mci, block_page);
359
360                 /* e752x mc reads 34:6 of the DRAM linear address */
361                 edac_mc_handle_ue(mci, block_page,
362                                 offset_in_page(error_2b << 4),
363                                 row, "e752x UE from Scruber");
364         }
365 }
366
367 static inline void process_ue(struct mem_ctl_info *mci, u16 error_one,
368                         u32 ded_add, u32 scrb_add, int *error_found,
369                         int handle_error)
370 {
371         *error_found = 1;
372
373         if (handle_error)
374                 do_process_ue(mci, error_one, ded_add, scrb_add);
375 }
376
377 static inline void process_ue_no_info_wr(struct mem_ctl_info *mci,
378                                          int *error_found, int handle_error)
379 {
380         *error_found = 1;
381
382         if (!handle_error)
383                 return;
384
385         debugf3("%s()\n", __func__);
386         edac_mc_handle_ue_no_info(mci, "e752x UE log memory write");
387 }
388
389 static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error,
390                                  u32 retry_add)
391 {
392         u32 error_1b, page;
393         int row;
394         struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
395
396         error_1b = retry_add;
397         page = error_1b >> (PAGE_SHIFT - 4);    /* convert the addr to 4k page */
398         row = pvt->mc_symmetric ? ((page >> 1) & 3) :   /* chip select are bits 14 & 13 */
399                 edac_mc_find_csrow_by_page(mci, page);
400         e752x_mc_printk(mci, KERN_WARNING,
401                         "CE page 0x%lx, row %d : Memory read retry\n",
402                         (long unsigned int)page, row);
403 }
404
405 static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error,
406                                 u32 retry_add, int *error_found,
407                                 int handle_error)
408 {
409         *error_found = 1;
410
411         if (handle_error)
412                 do_process_ded_retry(mci, error, retry_add);
413 }
414
415 static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error,
416                                         int *error_found, int handle_error)
417 {
418         *error_found = 1;
419
420         if (handle_error)
421                 e752x_mc_printk(mci, KERN_WARNING, "Memory threshold CE\n");
422 }
423
424 static char *global_message[11] = {
425         "PCI Express C1", "PCI Express C", "PCI Express B1",
426         "PCI Express B", "PCI Express A1", "PCI Express A",
427         "DMA Controler", "HUB or NS Interface", "System Bus",
428         "DRAM Controler", "Internal Buffer"
429 };
430
431 static char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
432
433 static void do_global_error(int fatal, u32 errors)
434 {
435         int i;
436
437         for (i = 0; i < 11; i++) {
438                 if (errors & (1 << i))
439                         e752x_printk(KERN_WARNING, "%sError %s\n",
440                                 fatal_message[fatal], global_message[i]);
441         }
442 }
443
444 static inline void global_error(int fatal, u32 errors, int *error_found,
445                                 int handle_error)
446 {
447         *error_found = 1;
448
449         if (handle_error)
450                 do_global_error(fatal, errors);
451 }
452
453 static char *hub_message[7] = {
454         "HI Address or Command Parity", "HI Illegal Access",
455         "HI Internal Parity", "Out of Range Access",
456         "HI Data Parity", "Enhanced Config Access",
457         "Hub Interface Target Abort"
458 };
459
460 static void do_hub_error(int fatal, u8 errors)
461 {
462         int i;
463
464         for (i = 0; i < 7; i++) {
465                 if (errors & (1 << i))
466                         e752x_printk(KERN_WARNING, "%sError %s\n",
467                                 fatal_message[fatal], hub_message[i]);
468         }
469 }
470
471 static inline void hub_error(int fatal, u8 errors, int *error_found,
472                         int handle_error)
473 {
474         *error_found = 1;
475
476         if (handle_error)
477                 do_hub_error(fatal, errors);
478 }
479
480 #define NSI_FATAL_MASK          0x0c080081
481 #define NSI_NON_FATAL_MASK      0x23a0ba64
482 #define NSI_ERR_MASK            (NSI_FATAL_MASK | NSI_NON_FATAL_MASK)
483
484 static char *nsi_message[30] = {
485         "NSI Link Down",        /* NSI_FERR/NSI_NERR bit 0, fatal error */
486         "",                                             /* reserved */
487         "NSI Parity Error",                             /* bit 2, non-fatal */
488         "",                                             /* reserved */
489         "",                                             /* reserved */
490         "Correctable Error Message",                    /* bit 5, non-fatal */
491         "Non-Fatal Error Message",                      /* bit 6, non-fatal */
492         "Fatal Error Message",                          /* bit 7, fatal */
493         "",                                             /* reserved */
494         "Receiver Error",                               /* bit 9, non-fatal */
495         "",                                             /* reserved */
496         "Bad TLP",                                      /* bit 11, non-fatal */
497         "Bad DLLP",                                     /* bit 12, non-fatal */
498         "REPLAY_NUM Rollover",                          /* bit 13, non-fatal */
499         "",                                             /* reserved */
500         "Replay Timer Timeout",                         /* bit 15, non-fatal */
501         "",                                             /* reserved */
502         "",                                             /* reserved */
503         "",                                             /* reserved */
504         "Data Link Protocol Error",                     /* bit 19, fatal */
505         "",                                             /* reserved */
506         "Poisoned TLP",                                 /* bit 21, non-fatal */
507         "",                                             /* reserved */
508         "Completion Timeout",                           /* bit 23, non-fatal */
509         "Completer Abort",                              /* bit 24, non-fatal */
510         "Unexpected Completion",                        /* bit 25, non-fatal */
511         "Receiver Overflow",                            /* bit 26, fatal */
512         "Malformed TLP",                                /* bit 27, fatal */
513         "",                                             /* reserved */
514         "Unsupported Request"                           /* bit 29, non-fatal */
515 };
516
517 static void do_nsi_error(int fatal, u32 errors)
518 {
519         int i;
520
521         for (i = 0; i < 30; i++) {
522                 if (errors & (1 << i))
523                         printk(KERN_WARNING "%sError %s\n",
524                                fatal_message[fatal], nsi_message[i]);
525         }
526 }
527
528 static inline void nsi_error(int fatal, u32 errors, int *error_found,
529                 int handle_error)
530 {
531         *error_found = 1;
532
533         if (handle_error)
534                 do_nsi_error(fatal, errors);
535 }
536
537 static char *membuf_message[4] = {
538         "Internal PMWB to DRAM parity",
539         "Internal PMWB to System Bus Parity",
540         "Internal System Bus or IO to PMWB Parity",
541         "Internal DRAM to PMWB Parity"
542 };
543
544 static void do_membuf_error(u8 errors)
545 {
546         int i;
547
548         for (i = 0; i < 4; i++) {
549                 if (errors & (1 << i))
550                         e752x_printk(KERN_WARNING, "Non-Fatal Error %s\n",
551                                 membuf_message[i]);
552         }
553 }
554
555 static inline void membuf_error(u8 errors, int *error_found, int handle_error)
556 {
557         *error_found = 1;
558
559         if (handle_error)
560                 do_membuf_error(errors);
561 }
562
563 static char *sysbus_message[10] = {
564         "Addr or Request Parity",
565         "Data Strobe Glitch",
566         "Addr Strobe Glitch",
567         "Data Parity",
568         "Addr Above TOM",
569         "Non DRAM Lock Error",
570         "MCERR", "BINIT",
571         "Memory Parity",
572         "IO Subsystem Parity"
573 };
574
575 static void do_sysbus_error(int fatal, u32 errors)
576 {
577         int i;
578
579         for (i = 0; i < 10; i++) {
580                 if (errors & (1 << i))
581                         e752x_printk(KERN_WARNING, "%sError System Bus %s\n",
582                                 fatal_message[fatal], sysbus_message[i]);
583         }
584 }
585
586 static inline void sysbus_error(int fatal, u32 errors, int *error_found,
587                                 int handle_error)
588 {
589         *error_found = 1;
590
591         if (handle_error)
592                 do_sysbus_error(fatal, errors);
593 }
594
595 static void e752x_check_hub_interface(struct e752x_error_info *info,
596                                 int *error_found, int handle_error)
597 {
598         u8 stat8;
599
600         //pci_read_config_byte(dev,E752X_HI_FERR,&stat8);
601
602         stat8 = info->hi_ferr;
603
604         if (stat8 & 0x7f) {     /* Error, so process */
605                 stat8 &= 0x7f;
606
607                 if (stat8 & 0x2b)
608                         hub_error(1, stat8 & 0x2b, error_found, handle_error);
609
610                 if (stat8 & 0x54)
611                         hub_error(0, stat8 & 0x54, error_found, handle_error);
612         }
613         //pci_read_config_byte(dev,E752X_HI_NERR,&stat8);
614
615         stat8 = info->hi_nerr;
616
617         if (stat8 & 0x7f) {     /* Error, so process */
618                 stat8 &= 0x7f;
619
620                 if (stat8 & 0x2b)
621                         hub_error(1, stat8 & 0x2b, error_found, handle_error);
622
623                 if (stat8 & 0x54)
624                         hub_error(0, stat8 & 0x54, error_found, handle_error);
625         }
626 }
627
628 static void e752x_check_ns_interface(struct e752x_error_info *info,
629                                 int *error_found, int handle_error)
630 {
631         u32 stat32;
632
633         stat32 = info->nsi_ferr;
634         if (stat32 & NSI_ERR_MASK) { /* Error, so process */
635                 if (stat32 & NSI_FATAL_MASK)    /* check for fatal errors */
636                         nsi_error(1, stat32 & NSI_FATAL_MASK, error_found,
637                                   handle_error);
638                 if (stat32 & NSI_NON_FATAL_MASK) /* check for non-fatal ones */
639                         nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found,
640                                   handle_error);
641         }
642         stat32 = info->nsi_nerr;
643         if (stat32 & NSI_ERR_MASK) {
644                 if (stat32 & NSI_FATAL_MASK)
645                         nsi_error(1, stat32 & NSI_FATAL_MASK, error_found,
646                                   handle_error);
647                 if (stat32 & NSI_NON_FATAL_MASK)
648                         nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found,
649                                   handle_error);
650         }
651 }
652
653 static void e752x_check_sysbus(struct e752x_error_info *info,
654                         int *error_found, int handle_error)
655 {
656         u32 stat32, error32;
657
658         //pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32);
659         stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16);
660
661         if (stat32 == 0)
662                 return;         /* no errors */
663
664         error32 = (stat32 >> 16) & 0x3ff;
665         stat32 = stat32 & 0x3ff;
666
667         if (stat32 & 0x087)
668                 sysbus_error(1, stat32 & 0x087, error_found, handle_error);
669
670         if (stat32 & 0x378)
671                 sysbus_error(0, stat32 & 0x378, error_found, handle_error);
672
673         if (error32 & 0x087)
674                 sysbus_error(1, error32 & 0x087, error_found, handle_error);
675
676         if (error32 & 0x378)
677                 sysbus_error(0, error32 & 0x378, error_found, handle_error);
678 }
679
680 static void e752x_check_membuf(struct e752x_error_info *info,
681                         int *error_found, int handle_error)
682 {
683         u8 stat8;
684
685         stat8 = info->buf_ferr;
686
687         if (stat8 & 0x0f) {     /* Error, so process */
688                 stat8 &= 0x0f;
689                 membuf_error(stat8, error_found, handle_error);
690         }
691
692         stat8 = info->buf_nerr;
693
694         if (stat8 & 0x0f) {     /* Error, so process */
695                 stat8 &= 0x0f;
696                 membuf_error(stat8, error_found, handle_error);
697         }
698 }
699
700 static void e752x_check_dram(struct mem_ctl_info *mci,
701                         struct e752x_error_info *info, int *error_found,
702                         int handle_error)
703 {
704         u16 error_one, error_next;
705
706         error_one = info->dram_ferr;
707         error_next = info->dram_nerr;
708
709         /* decode and report errors */
710         if (error_one & 0x0101) /* check first error correctable */
711                 process_ce(mci, error_one, info->dram_sec1_add,
712                         info->dram_sec1_syndrome, error_found, handle_error);
713
714         if (error_next & 0x0101)        /* check next error correctable */
715                 process_ce(mci, error_next, info->dram_sec2_add,
716                         info->dram_sec2_syndrome, error_found, handle_error);
717
718         if (error_one & 0x4040)
719                 process_ue_no_info_wr(mci, error_found, handle_error);
720
721         if (error_next & 0x4040)
722                 process_ue_no_info_wr(mci, error_found, handle_error);
723
724         if (error_one & 0x2020)
725                 process_ded_retry(mci, error_one, info->dram_retr_add,
726                                 error_found, handle_error);
727
728         if (error_next & 0x2020)
729                 process_ded_retry(mci, error_next, info->dram_retr_add,
730                                 error_found, handle_error);
731
732         if (error_one & 0x0808)
733                 process_threshold_ce(mci, error_one, error_found, handle_error);
734
735         if (error_next & 0x0808)
736                 process_threshold_ce(mci, error_next, error_found,
737                                 handle_error);
738
739         if (error_one & 0x0606)
740                 process_ue(mci, error_one, info->dram_ded_add,
741                         info->dram_scrb_add, error_found, handle_error);
742
743         if (error_next & 0x0606)
744                 process_ue(mci, error_next, info->dram_ded_add,
745                         info->dram_scrb_add, error_found, handle_error);
746 }
747
748 static void e752x_get_error_info(struct mem_ctl_info *mci,
749                                  struct e752x_error_info *info)
750 {
751         struct pci_dev *dev;
752         struct e752x_pvt *pvt;
753
754         memset(info, 0, sizeof(*info));
755         pvt = (struct e752x_pvt *)mci->pvt_info;
756         dev = pvt->dev_d0f1;
757         pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global);
758
759         if (info->ferr_global) {
760                 if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
761                         pci_read_config_dword(dev, I3100_NSI_FERR,
762                                              &info->nsi_ferr);
763                         info->hi_ferr = 0;
764                 } else {
765                         pci_read_config_byte(dev, E752X_HI_FERR,
766                                              &info->hi_ferr);
767                         info->nsi_ferr = 0;
768                 }
769                 pci_read_config_word(dev, E752X_SYSBUS_FERR,
770                                 &info->sysbus_ferr);
771                 pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr);
772                 pci_read_config_word(dev, E752X_DRAM_FERR, &info->dram_ferr);
773                 pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD,
774                                 &info->dram_sec1_add);
775                 pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME,
776                                 &info->dram_sec1_syndrome);
777                 pci_read_config_dword(dev, E752X_DRAM_DED_ADD,
778                                 &info->dram_ded_add);
779                 pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD,
780                                 &info->dram_scrb_add);
781                 pci_read_config_dword(dev, E752X_DRAM_RETR_ADD,
782                                 &info->dram_retr_add);
783
784                 /* ignore the reserved bits just in case */
785                 if (info->hi_ferr & 0x7f)
786                         pci_write_config_byte(dev, E752X_HI_FERR,
787                                         info->hi_ferr);
788
789                 if (info->nsi_ferr & NSI_ERR_MASK)
790                         pci_write_config_dword(dev, I3100_NSI_FERR,
791                                         info->nsi_ferr);
792
793                 if (info->sysbus_ferr)
794                         pci_write_config_word(dev, E752X_SYSBUS_FERR,
795                                         info->sysbus_ferr);
796
797                 if (info->buf_ferr & 0x0f)
798                         pci_write_config_byte(dev, E752X_BUF_FERR,
799                                         info->buf_ferr);
800
801                 if (info->dram_ferr)
802                         pci_write_bits16(pvt->bridge_ck, E752X_DRAM_FERR,
803                                          info->dram_ferr, info->dram_ferr);
804
805                 pci_write_config_dword(dev, E752X_FERR_GLOBAL,
806                                 info->ferr_global);
807         }
808
809         pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global);
810
811         if (info->nerr_global) {
812                 if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
813                         pci_read_config_dword(dev, I3100_NSI_NERR,
814                                              &info->nsi_nerr);
815                         info->hi_nerr = 0;
816                 } else {
817                         pci_read_config_byte(dev, E752X_HI_NERR,
818                                              &info->hi_nerr);
819                         info->nsi_nerr = 0;
820                 }
821                 pci_read_config_word(dev, E752X_SYSBUS_NERR,
822                                 &info->sysbus_nerr);
823                 pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr);
824                 pci_read_config_word(dev, E752X_DRAM_NERR, &info->dram_nerr);
825                 pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD,
826                                 &info->dram_sec2_add);
827                 pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME,
828                                 &info->dram_sec2_syndrome);
829
830                 if (info->hi_nerr & 0x7f)
831                         pci_write_config_byte(dev, E752X_HI_NERR,
832                                         info->hi_nerr);
833
834                 if (info->nsi_nerr & NSI_ERR_MASK)
835                         pci_write_config_dword(dev, I3100_NSI_NERR,
836                                         info->nsi_nerr);
837
838                 if (info->sysbus_nerr)
839                         pci_write_config_word(dev, E752X_SYSBUS_NERR,
840                                         info->sysbus_nerr);
841
842                 if (info->buf_nerr & 0x0f)
843                         pci_write_config_byte(dev, E752X_BUF_NERR,
844                                         info->buf_nerr);
845
846                 if (info->dram_nerr)
847                         pci_write_bits16(pvt->bridge_ck, E752X_DRAM_NERR,
848                                          info->dram_nerr, info->dram_nerr);
849
850                 pci_write_config_dword(dev, E752X_NERR_GLOBAL,
851                                 info->nerr_global);
852         }
853 }
854
855 static int e752x_process_error_info(struct mem_ctl_info *mci,
856                                 struct e752x_error_info *info,
857                                 int handle_errors)
858 {
859         u32 error32, stat32;
860         int error_found;
861
862         error_found = 0;
863         error32 = (info->ferr_global >> 18) & 0x3ff;
864         stat32 = (info->ferr_global >> 4) & 0x7ff;
865
866         if (error32)
867                 global_error(1, error32, &error_found, handle_errors);
868
869         if (stat32)
870                 global_error(0, stat32, &error_found, handle_errors);
871
872         error32 = (info->nerr_global >> 18) & 0x3ff;
873         stat32 = (info->nerr_global >> 4) & 0x7ff;
874
875         if (error32)
876                 global_error(1, error32, &error_found, handle_errors);
877
878         if (stat32)
879                 global_error(0, stat32, &error_found, handle_errors);
880
881         e752x_check_hub_interface(info, &error_found, handle_errors);
882         e752x_check_ns_interface(info, &error_found, handle_errors);
883         e752x_check_sysbus(info, &error_found, handle_errors);
884         e752x_check_membuf(info, &error_found, handle_errors);
885         e752x_check_dram(mci, info, &error_found, handle_errors);
886         return error_found;
887 }
888
889 static void e752x_check(struct mem_ctl_info *mci)
890 {
891         struct e752x_error_info info;
892
893         debugf3("%s()\n", __func__);
894         e752x_get_error_info(mci, &info);
895         e752x_process_error_info(mci, &info, 1);
896 }
897
898 /* Return 1 if dual channel mode is active.  Else return 0. */
899 static inline int dual_channel_active(u16 ddrcsr)
900 {
901         return (((ddrcsr >> 12) & 3) == 3);
902 }
903
904 /* Remap csrow index numbers if map_type is "reverse"
905  */
906 static inline int remap_csrow_index(struct mem_ctl_info *mci, int index)
907 {
908         struct e752x_pvt *pvt = mci->pvt_info;
909
910         if (!pvt->map_type)
911                 return (7 - index);
912
913         return (index);
914 }
915
916 static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
917                         u16 ddrcsr)
918 {
919         struct csrow_info *csrow;
920         unsigned long last_cumul_size;
921         int index, mem_dev, drc_chan;
922         int drc_drbg;           /* DRB granularity 0=64mb, 1=128mb */
923         int drc_ddim;           /* DRAM Data Integrity Mode 0=none, 2=edac */
924         u8 value;
925         u32 dra, drc, cumul_size;
926
927         dra = 0;
928         for (index = 0; index < 4; index++) {
929                 u8 dra_reg;
930                 pci_read_config_byte(pdev, E752X_DRA + index, &dra_reg);
931                 dra |= dra_reg << (index * 8);
932         }
933         pci_read_config_dword(pdev, E752X_DRC, &drc);
934         drc_chan = dual_channel_active(ddrcsr);
935         drc_drbg = drc_chan + 1;        /* 128 in dual mode, 64 in single */
936         drc_ddim = (drc >> 20) & 0x3;
937
938         /* The dram row boundary (DRB) reg values are boundary address for
939          * each DRAM row with a granularity of 64 or 128MB (single/dual
940          * channel operation).  DRB regs are cumulative; therefore DRB7 will
941          * contain the total memory contained in all eight rows.
942          */
943         for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
944                 /* mem_dev 0=x8, 1=x4 */
945                 mem_dev = (dra >> (index * 4 + 2)) & 0x3;
946                 csrow = &mci->csrows[remap_csrow_index(mci, index)];
947
948                 mem_dev = (mem_dev == 2);
949                 pci_read_config_byte(pdev, E752X_DRB + index, &value);
950                 /* convert a 128 or 64 MiB DRB to a page size. */
951                 cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
952                 debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
953                         cumul_size);
954                 if (cumul_size == last_cumul_size)
955                         continue;       /* not populated */
956
957                 csrow->first_page = last_cumul_size;
958                 csrow->last_page = cumul_size - 1;
959                 csrow->nr_pages = cumul_size - last_cumul_size;
960                 last_cumul_size = cumul_size;
961                 csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
962                 csrow->mtype = MEM_RDDR;        /* only one type supported */
963                 csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
964
965                 /*
966                  * if single channel or x8 devices then SECDED
967                  * if dual channel and x4 then S4ECD4ED
968                  */
969                 if (drc_ddim) {
970                         if (drc_chan && mem_dev) {
971                                 csrow->edac_mode = EDAC_S4ECD4ED;
972                                 mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
973                         } else {
974                                 csrow->edac_mode = EDAC_SECDED;
975                                 mci->edac_cap |= EDAC_FLAG_SECDED;
976                         }
977                 } else
978                         csrow->edac_mode = EDAC_NONE;
979         }
980 }
981
982 static void e752x_init_mem_map_table(struct pci_dev *pdev,
983                                 struct e752x_pvt *pvt)
984 {
985         int index;
986         u8 value, last, row;
987
988         last = 0;
989         row = 0;
990
991         for (index = 0; index < 8; index += 2) {
992                 pci_read_config_byte(pdev, E752X_DRB + index, &value);
993                 /* test if there is a dimm in this slot */
994                 if (value == last) {
995                         /* no dimm in the slot, so flag it as empty */
996                         pvt->map[index] = 0xff;
997                         pvt->map[index + 1] = 0xff;
998                 } else {        /* there is a dimm in the slot */
999                         pvt->map[index] = row;
1000                         row++;
1001                         last = value;
1002                         /* test the next value to see if the dimm is double
1003                          * sided
1004                          */
1005                         pci_read_config_byte(pdev, E752X_DRB + index + 1,
1006                                         &value);
1007
1008                         /* the dimm is single sided, so flag as empty */
1009                         /* this is a double sided dimm to save the next row #*/
1010                         pvt->map[index + 1] = (value == last) ? 0xff :  row;
1011                         row++;
1012                         last = value;
1013                 }
1014         }
1015 }
1016
1017 /* Return 0 on success or 1 on failure. */
1018 static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
1019                         struct e752x_pvt *pvt)
1020 {
1021         struct pci_dev *dev;
1022
1023         pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
1024                                         pvt->dev_info->err_dev, pvt->bridge_ck);
1025
1026         if (pvt->bridge_ck == NULL)
1027                 pvt->bridge_ck = pci_scan_single_device(pdev->bus,
1028                                                         PCI_DEVFN(0, 1));
1029
1030         if (pvt->bridge_ck == NULL) {
1031                 e752x_printk(KERN_ERR, "error reporting device not found:"
1032                         "vendor %x device 0x%x (broken BIOS?)\n",
1033                         PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
1034                 return 1;
1035         }
1036
1037         dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
1038                         NULL);
1039
1040         if (dev == NULL)
1041                 goto fail;
1042
1043         pvt->dev_d0f0 = dev;
1044         pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
1045
1046         return 0;
1047
1048 fail:
1049         pci_dev_put(pvt->bridge_ck);
1050         return 1;
1051 }
1052
1053 /* Setup system bus parity mask register.
1054  * Sysbus parity supported on:
1055  *   e7320/e7520/e7525 + Xeon
1056  *   i3100 + Xeon/Celeron
1057  * Sysbus parity not supported on:
1058  *   i3100 + Pentium M/Celeron M/Core Duo/Core2 Duo
1059  */
1060 static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
1061 {
1062         char *cpu_id = cpu_data(0).x86_model_id;
1063         struct pci_dev *dev = pvt->dev_d0f1;
1064         int enable = 1;
1065
1066         /* Allow module paramter override, else see if CPU supports parity */
1067         if (sysbus_parity != -1) {
1068                 enable = sysbus_parity;
1069         } else if (cpu_id[0] &&
1070                    ((strstr(cpu_id, "Pentium") && strstr(cpu_id, " M ")) ||
1071                     (strstr(cpu_id, "Celeron") && strstr(cpu_id, " M ")) ||
1072                     (strstr(cpu_id, "Core") && strstr(cpu_id, "Duo")))) {
1073                 e752x_printk(KERN_INFO, "System Bus Parity not "
1074                              "supported by CPU, disabling\n");
1075                 enable = 0;
1076         }
1077
1078         if (enable)
1079                 pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0000);
1080         else
1081                 pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0309);
1082 }
1083
1084 static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt)
1085 {
1086         struct pci_dev *dev;
1087
1088         dev = pvt->dev_d0f1;
1089         /* Turn off error disable & SMI in case the BIOS turned it on */
1090         if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
1091                 pci_write_config_dword(dev, I3100_NSI_EMASK, 0);
1092                 pci_write_config_dword(dev, I3100_NSI_SMICMD, 0);
1093         } else {
1094                 pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
1095                 pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
1096         }
1097
1098         e752x_init_sysbus_parity_mask(pvt);
1099
1100         pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
1101         pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
1102         pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
1103         pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
1104         pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
1105 }
1106
1107 static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
1108 {
1109         u16 pci_data;
1110         u8 stat8;
1111         struct mem_ctl_info *mci;
1112         struct e752x_pvt *pvt;
1113         u16 ddrcsr;
1114         int drc_chan;           /* Number of channels 0=1chan,1=2chan */
1115         struct e752x_error_info discard;
1116
1117         debugf0("%s(): mci\n", __func__);
1118         debugf0("Starting Probe1\n");
1119
1120         /* check to see if device 0 function 1 is enabled; if it isn't, we
1121          * assume the BIOS has reserved it for a reason and is expecting
1122          * exclusive access, we take care not to violate that assumption and
1123          * fail the probe. */
1124         pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
1125         if (!force_function_unhide && !(stat8 & (1 << 5))) {
1126                 printk(KERN_INFO "Contact your BIOS vendor to see if the "
1127                         "E752x error registers can be safely un-hidden\n");
1128                 return -ENODEV;
1129         }
1130         stat8 |= (1 << 5);
1131         pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
1132
1133         pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
1134         /* FIXME: should check >>12 or 0xf, true for all? */
1135         /* Dual channel = 1, Single channel = 0 */
1136         drc_chan = dual_channel_active(ddrcsr);
1137
1138         mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1, 0);
1139
1140         if (mci == NULL) {
1141                 return -ENOMEM;
1142         }
1143
1144         debugf3("%s(): init mci\n", __func__);
1145         mci->mtype_cap = MEM_FLAG_RDDR;
1146         /* 3100 IMCH supports SECDEC only */
1147         mci->edac_ctl_cap = (dev_idx == I3100) ? EDAC_FLAG_SECDED :
1148                 (EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED);
1149         /* FIXME - what if different memory types are in different csrows? */
1150         mci->mod_name = EDAC_MOD_STR;
1151         mci->mod_ver = E752X_REVISION;
1152         mci->dev = &pdev->dev;
1153
1154         debugf3("%s(): init pvt\n", __func__);
1155         pvt = (struct e752x_pvt *)mci->pvt_info;
1156         pvt->dev_info = &e752x_devs[dev_idx];
1157         pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
1158
1159         if (e752x_get_devs(pdev, dev_idx, pvt)) {
1160                 edac_mc_free(mci);
1161                 return -ENODEV;
1162         }
1163
1164         debugf3("%s(): more mci init\n", __func__);
1165         mci->ctl_name = pvt->dev_info->ctl_name;
1166         mci->dev_name = pci_name(pdev);
1167         mci->edac_check = e752x_check;
1168         mci->ctl_page_to_phys = ctl_page_to_phys;
1169
1170         /* set the map type.  1 = normal, 0 = reversed
1171          * Must be set before e752x_init_csrows in case csrow mapping
1172          * is reversed.
1173          */
1174         pci_read_config_byte(pdev, E752X_DRM, &stat8);
1175         pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
1176
1177         e752x_init_csrows(mci, pdev, ddrcsr);
1178         e752x_init_mem_map_table(pdev, pvt);
1179
1180         if (dev_idx == I3100)
1181                 mci->edac_cap = EDAC_FLAG_SECDED; /* the only mode supported */
1182         else
1183                 mci->edac_cap |= EDAC_FLAG_NONE;
1184         debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
1185
1186         /* load the top of low memory, remap base, and remap limit vars */
1187         pci_read_config_word(pdev, E752X_TOLM, &pci_data);
1188         pvt->tolm = ((u32) pci_data) << 4;
1189         pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data);
1190         pvt->remapbase = ((u32) pci_data) << 14;
1191         pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data);
1192         pvt->remaplimit = ((u32) pci_data) << 14;
1193         e752x_printk(KERN_INFO,
1194                         "tolm = %x, remapbase = %x, remaplimit = %x\n",
1195                         pvt->tolm, pvt->remapbase, pvt->remaplimit);
1196
1197         /* Here we assume that we will never see multiple instances of this
1198          * type of memory controller.  The ID is therefore hardcoded to 0.
1199          */
1200         if (edac_mc_add_mc(mci)) {
1201                 debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
1202                 goto fail;
1203         }
1204
1205         e752x_init_error_reporting_regs(pvt);
1206         e752x_get_error_info(mci, &discard);    /* clear other MCH errors */
1207
1208         /* allocating generic PCI control info */
1209         e752x_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
1210         if (!e752x_pci) {
1211                 printk(KERN_WARNING
1212                         "%s(): Unable to create PCI control\n", __func__);
1213                 printk(KERN_WARNING
1214                         "%s(): PCI error report via EDAC not setup\n",
1215                         __func__);
1216         }
1217
1218         /* get this far and it's successful */
1219         debugf3("%s(): success\n", __func__);
1220         return 0;
1221
1222 fail:
1223         pci_dev_put(pvt->dev_d0f0);
1224         pci_dev_put(pvt->dev_d0f1);
1225         pci_dev_put(pvt->bridge_ck);
1226         edac_mc_free(mci);
1227
1228         return -ENODEV;
1229 }
1230
1231 /* returns count (>= 0), or negative on error */
1232 static int __devinit e752x_init_one(struct pci_dev *pdev,
1233                                 const struct pci_device_id *ent)
1234 {
1235         debugf0("%s()\n", __func__);
1236
1237         /* wake up and enable device */
1238         if (pci_enable_device(pdev) < 0)
1239                 return -EIO;
1240
1241         return e752x_probe1(pdev, ent->driver_data);
1242 }
1243
1244 static void __devexit e752x_remove_one(struct pci_dev *pdev)
1245 {
1246         struct mem_ctl_info *mci;
1247         struct e752x_pvt *pvt;
1248
1249         debugf0("%s()\n", __func__);
1250
1251         if (e752x_pci)
1252                 edac_pci_release_generic_ctl(e752x_pci);
1253
1254         if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
1255                 return;
1256
1257         pvt = (struct e752x_pvt *)mci->pvt_info;
1258         pci_dev_put(pvt->dev_d0f0);
1259         pci_dev_put(pvt->dev_d0f1);
1260         pci_dev_put(pvt->bridge_ck);
1261         edac_mc_free(mci);
1262 }
1263
1264 static const struct pci_device_id e752x_pci_tbl[] __devinitdata = {
1265         {
1266          PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1267          E7520},
1268         {
1269          PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1270          E7525},
1271         {
1272          PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1273          E7320},
1274         {
1275          PCI_VEND_DEV(INTEL, 3100_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1276          I3100},
1277         {
1278          0,
1279          }                      /* 0 terminated list. */
1280 };
1281
1282 MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
1283
1284 static struct pci_driver e752x_driver = {
1285         .name = EDAC_MOD_STR,
1286         .probe = e752x_init_one,
1287         .remove = __devexit_p(e752x_remove_one),
1288         .id_table = e752x_pci_tbl,
1289 };
1290
1291 static int __init e752x_init(void)
1292 {
1293         int pci_rc;
1294
1295         debugf3("%s()\n", __func__);
1296
1297        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
1298        opstate_init();
1299
1300         pci_rc = pci_register_driver(&e752x_driver);
1301         return (pci_rc < 0) ? pci_rc : 0;
1302 }
1303
1304 static void __exit e752x_exit(void)
1305 {
1306         debugf3("%s()\n", __func__);
1307         pci_unregister_driver(&e752x_driver);
1308 }
1309
1310 module_init(e752x_init);
1311 module_exit(e752x_exit);
1312
1313 MODULE_LICENSE("GPL");
1314 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
1315 MODULE_DESCRIPTION("MC support for Intel e752x/3100 memory controllers");
1316
1317 module_param(force_function_unhide, int, 0444);
1318 MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
1319                  " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
1320
1321 module_param(edac_op_state, int, 0444);
1322 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
1323
1324 module_param(sysbus_parity, int, 0444);
1325 MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking,"
1326                 " 1=enable system bus parity checking, default=auto-detect");