pcmcia: IRQ_TYPE_EXCLUSIVE is long obsoleted
[linux-2.6.git] / drivers / char / pcmcia / synclink_cs.c
1 /*
2  * linux/drivers/char/pcmcia/synclink_cs.c
3  *
4  * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
5  *
6  * Device driver for Microgate SyncLink PC Card
7  * multiprotocol serial adapter.
8  *
9  * written by Paul Fulghum for Microgate Corporation
10  * paulkf@microgate.com
11  *
12  * Microgate and SyncLink are trademarks of Microgate Corporation
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
19  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
20  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
24  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
26  * OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28
29 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
30 #if defined(__i386__)
31 #  define BREAKPOINT() asm("   int $3");
32 #else
33 #  define BREAKPOINT() { }
34 #endif
35
36 #define MAX_DEVICE_COUNT 4
37
38 #include <linux/module.h>
39 #include <linux/errno.h>
40 #include <linux/signal.h>
41 #include <linux/sched.h>
42 #include <linux/timer.h>
43 #include <linux/time.h>
44 #include <linux/interrupt.h>
45 #include <linux/tty.h>
46 #include <linux/tty_flip.h>
47 #include <linux/serial.h>
48 #include <linux/major.h>
49 #include <linux/string.h>
50 #include <linux/fcntl.h>
51 #include <linux/ptrace.h>
52 #include <linux/ioport.h>
53 #include <linux/mm.h>
54 #include <linux/slab.h>
55 #include <linux/netdevice.h>
56 #include <linux/vmalloc.h>
57 #include <linux/init.h>
58 #include <linux/delay.h>
59 #include <linux/ioctl.h>
60 #include <linux/synclink.h>
61
62 #include <asm/system.h>
63 #include <asm/io.h>
64 #include <asm/irq.h>
65 #include <asm/dma.h>
66 #include <linux/bitops.h>
67 #include <asm/types.h>
68 #include <linux/termios.h>
69 #include <linux/workqueue.h>
70 #include <linux/hdlc.h>
71
72 #include <pcmcia/cs_types.h>
73 #include <pcmcia/cs.h>
74 #include <pcmcia/cistpl.h>
75 #include <pcmcia/cisreg.h>
76 #include <pcmcia/ds.h>
77
78 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
79 #define SYNCLINK_GENERIC_HDLC 1
80 #else
81 #define SYNCLINK_GENERIC_HDLC 0
82 #endif
83
84 #define GET_USER(error,value,addr) error = get_user(value,addr)
85 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
86 #define PUT_USER(error,value,addr) error = put_user(value,addr)
87 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
88
89 #include <asm/uaccess.h>
90
91 static MGSL_PARAMS default_params = {
92         MGSL_MODE_HDLC,                 /* unsigned long mode */
93         0,                              /* unsigned char loopback; */
94         HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
95         HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
96         0,                              /* unsigned long clock_speed; */
97         0xff,                           /* unsigned char addr_filter; */
98         HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
99         HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
100         HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
101         9600,                           /* unsigned long data_rate; */
102         8,                              /* unsigned char data_bits; */
103         1,                              /* unsigned char stop_bits; */
104         ASYNC_PARITY_NONE               /* unsigned char parity; */
105 };
106
107 typedef struct
108 {
109         int count;
110         unsigned char status;
111         char data[1];
112 } RXBUF;
113
114 /* The queue of BH actions to be performed */
115
116 #define BH_RECEIVE  1
117 #define BH_TRANSMIT 2
118 #define BH_STATUS   4
119
120 #define IO_PIN_SHUTDOWN_LIMIT 100
121
122 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
123
124 struct _input_signal_events {
125         int     ri_up;
126         int     ri_down;
127         int     dsr_up;
128         int     dsr_down;
129         int     dcd_up;
130         int     dcd_down;
131         int     cts_up;
132         int     cts_down;
133 };
134
135
136 /*
137  * Device instance data structure
138  */
139
140 typedef struct _mgslpc_info {
141         void *if_ptr;   /* General purpose pointer (used by SPPP) */
142         int                     magic;
143         int                     flags;
144         int                     count;          /* count of opens */
145         int                     line;
146         unsigned short          close_delay;
147         unsigned short          closing_wait;   /* time to wait before closing */
148
149         struct mgsl_icount      icount;
150
151         struct tty_struct       *tty;
152         int                     timeout;
153         int                     x_char;         /* xon/xoff character */
154         int                     blocked_open;   /* # of blocked opens */
155         unsigned char           read_status_mask;
156         unsigned char           ignore_status_mask;
157
158         unsigned char *tx_buf;
159         int            tx_put;
160         int            tx_get;
161         int            tx_count;
162
163         /* circular list of fixed length rx buffers */
164
165         unsigned char  *rx_buf;        /* memory allocated for all rx buffers */
166         int            rx_buf_total_size; /* size of memory allocated for rx buffers */
167         int            rx_put;         /* index of next empty rx buffer */
168         int            rx_get;         /* index of next full rx buffer */
169         int            rx_buf_size;    /* size in bytes of single rx buffer */
170         int            rx_buf_count;   /* total number of rx buffers */
171         int            rx_frame_count; /* number of full rx buffers */
172
173         wait_queue_head_t       open_wait;
174         wait_queue_head_t       close_wait;
175
176         wait_queue_head_t       status_event_wait_q;
177         wait_queue_head_t       event_wait_q;
178         struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
179         struct _mgslpc_info     *next_device;   /* device list link */
180
181         unsigned short imra_value;
182         unsigned short imrb_value;
183         unsigned char  pim_value;
184
185         spinlock_t lock;
186         struct work_struct task;                /* task structure for scheduling bh */
187
188         u32 max_frame_size;
189
190         u32 pending_bh;
191
192         bool bh_running;
193         bool bh_requested;
194
195         int dcd_chkcount; /* check counts to prevent */
196         int cts_chkcount; /* too many IRQs if a signal */
197         int dsr_chkcount; /* is floating */
198         int ri_chkcount;
199
200         bool rx_enabled;
201         bool rx_overflow;
202
203         bool tx_enabled;
204         bool tx_active;
205         bool tx_aborting;
206         u32 idle_mode;
207
208         int if_mode; /* serial interface selection (RS-232, v.35 etc) */
209
210         char device_name[25];           /* device instance name */
211
212         unsigned int io_base;   /* base I/O address of adapter */
213         unsigned int irq_level;
214
215         MGSL_PARAMS params;             /* communications parameters */
216
217         unsigned char serial_signals;   /* current serial signal states */
218
219         bool irq_occurred;              /* for diagnostics use */
220         char testing_irq;
221         unsigned int init_error;        /* startup error (DIAGS)        */
222
223         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
224         bool drop_rts_on_tx_done;
225
226         struct  _input_signal_events    input_signal_events;
227
228         /* PCMCIA support */
229         struct pcmcia_device    *p_dev;
230         dev_node_t            node;
231         int                   stop;
232
233         /* SPPP/Cisco HDLC device parts */
234         int netcount;
235         spinlock_t netlock;
236
237 #if SYNCLINK_GENERIC_HDLC
238         struct net_device *netdev;
239 #endif
240
241 } MGSLPC_INFO;
242
243 #define MGSLPC_MAGIC 0x5402
244
245 /*
246  * The size of the serial xmit buffer is 1 page, or 4096 bytes
247  */
248 #define TXBUFSIZE 4096
249
250
251 #define CHA     0x00   /* channel A offset */
252 #define CHB     0x40   /* channel B offset */
253
254 /*
255  *  FIXME: PPC has PVR defined in asm/reg.h.  For now we just undef it.
256  */
257 #undef PVR
258
259 #define RXFIFO  0
260 #define TXFIFO  0
261 #define STAR    0x20
262 #define CMDR    0x20
263 #define RSTA    0x21
264 #define PRE     0x21
265 #define MODE    0x22
266 #define TIMR    0x23
267 #define XAD1    0x24
268 #define XAD2    0x25
269 #define RAH1    0x26
270 #define RAH2    0x27
271 #define DAFO    0x27
272 #define RAL1    0x28
273 #define RFC     0x28
274 #define RHCR    0x29
275 #define RAL2    0x29
276 #define RBCL    0x2a
277 #define XBCL    0x2a
278 #define RBCH    0x2b
279 #define XBCH    0x2b
280 #define CCR0    0x2c
281 #define CCR1    0x2d
282 #define CCR2    0x2e
283 #define CCR3    0x2f
284 #define VSTR    0x34
285 #define BGR     0x34
286 #define RLCR    0x35
287 #define AML     0x36
288 #define AMH     0x37
289 #define GIS     0x38
290 #define IVA     0x38
291 #define IPC     0x39
292 #define ISR     0x3a
293 #define IMR     0x3a
294 #define PVR     0x3c
295 #define PIS     0x3d
296 #define PIM     0x3d
297 #define PCR     0x3e
298 #define CCR4    0x3f
299
300 // IMR/ISR
301
302 #define IRQ_BREAK_ON    BIT15   // rx break detected
303 #define IRQ_DATAOVERRUN BIT14   // receive data overflow
304 #define IRQ_ALLSENT     BIT13   // all sent
305 #define IRQ_UNDERRUN    BIT12   // transmit data underrun
306 #define IRQ_TIMER       BIT11   // timer interrupt
307 #define IRQ_CTS         BIT10   // CTS status change
308 #define IRQ_TXREPEAT    BIT9    // tx message repeat
309 #define IRQ_TXFIFO      BIT8    // transmit pool ready
310 #define IRQ_RXEOM       BIT7    // receive message end
311 #define IRQ_EXITHUNT    BIT6    // receive frame start
312 #define IRQ_RXTIME      BIT6    // rx char timeout
313 #define IRQ_DCD         BIT2    // carrier detect status change
314 #define IRQ_OVERRUN     BIT1    // receive frame overflow
315 #define IRQ_RXFIFO      BIT0    // receive pool full
316
317 // STAR
318
319 #define XFW   BIT6              // transmit FIFO write enable
320 #define CEC   BIT2              // command executing
321 #define CTS   BIT1              // CTS state
322
323 #define PVR_DTR      BIT0
324 #define PVR_DSR      BIT1
325 #define PVR_RI       BIT2
326 #define PVR_AUTOCTS  BIT3
327 #define PVR_RS232    0x20   /* 0010b */
328 #define PVR_V35      0xe0   /* 1110b */
329 #define PVR_RS422    0x40   /* 0100b */
330
331 /* Register access functions */
332
333 #define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
334 #define read_reg(info, reg) inb((info)->io_base + (reg))
335
336 #define read_reg16(info, reg) inw((info)->io_base + (reg))
337 #define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
338
339 #define set_reg_bits(info, reg, mask) \
340     write_reg(info, (reg), \
341                  (unsigned char) (read_reg(info, (reg)) | (mask)))
342 #define clear_reg_bits(info, reg, mask) \
343     write_reg(info, (reg), \
344                  (unsigned char) (read_reg(info, (reg)) & ~(mask)))
345 /*
346  * interrupt enable/disable routines
347  */
348 static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
349 {
350         if (channel == CHA) {
351                 info->imra_value |= mask;
352                 write_reg16(info, CHA + IMR, info->imra_value);
353         } else {
354                 info->imrb_value |= mask;
355                 write_reg16(info, CHB + IMR, info->imrb_value);
356         }
357 }
358 static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
359 {
360         if (channel == CHA) {
361                 info->imra_value &= ~mask;
362                 write_reg16(info, CHA + IMR, info->imra_value);
363         } else {
364                 info->imrb_value &= ~mask;
365                 write_reg16(info, CHB + IMR, info->imrb_value);
366         }
367 }
368
369 #define port_irq_disable(info, mask) \
370   { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
371
372 #define port_irq_enable(info, mask) \
373   { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
374
375 static void rx_start(MGSLPC_INFO *info);
376 static void rx_stop(MGSLPC_INFO *info);
377
378 static void tx_start(MGSLPC_INFO *info);
379 static void tx_stop(MGSLPC_INFO *info);
380 static void tx_set_idle(MGSLPC_INFO *info);
381
382 static void get_signals(MGSLPC_INFO *info);
383 static void set_signals(MGSLPC_INFO *info);
384
385 static void reset_device(MGSLPC_INFO *info);
386
387 static void hdlc_mode(MGSLPC_INFO *info);
388 static void async_mode(MGSLPC_INFO *info);
389
390 static void tx_timeout(unsigned long context);
391
392 static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg);
393
394 #if SYNCLINK_GENERIC_HDLC
395 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
396 static void hdlcdev_tx_done(MGSLPC_INFO *info);
397 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
398 static int  hdlcdev_init(MGSLPC_INFO *info);
399 static void hdlcdev_exit(MGSLPC_INFO *info);
400 #endif
401
402 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
403
404 static bool register_test(MGSLPC_INFO *info);
405 static bool irq_test(MGSLPC_INFO *info);
406 static int adapter_test(MGSLPC_INFO *info);
407
408 static int claim_resources(MGSLPC_INFO *info);
409 static void release_resources(MGSLPC_INFO *info);
410 static void mgslpc_add_device(MGSLPC_INFO *info);
411 static void mgslpc_remove_device(MGSLPC_INFO *info);
412
413 static bool rx_get_frame(MGSLPC_INFO *info);
414 static void rx_reset_buffers(MGSLPC_INFO *info);
415 static int  rx_alloc_buffers(MGSLPC_INFO *info);
416 static void rx_free_buffers(MGSLPC_INFO *info);
417
418 static irqreturn_t mgslpc_isr(int irq, void *dev_id);
419
420 /*
421  * Bottom half interrupt handlers
422  */
423 static void bh_handler(struct work_struct *work);
424 static void bh_transmit(MGSLPC_INFO *info);
425 static void bh_status(MGSLPC_INFO *info);
426
427 /*
428  * ioctl handlers
429  */
430 static int tiocmget(struct tty_struct *tty, struct file *file);
431 static int tiocmset(struct tty_struct *tty, struct file *file,
432                     unsigned int set, unsigned int clear);
433 static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
434 static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
435 static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params);
436 static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
437 static int set_txidle(MGSLPC_INFO *info, int idle_mode);
438 static int set_txenable(MGSLPC_INFO *info, int enable);
439 static int tx_abort(MGSLPC_INFO *info);
440 static int set_rxenable(MGSLPC_INFO *info, int enable);
441 static int wait_events(MGSLPC_INFO *info, int __user *mask);
442
443 static MGSLPC_INFO *mgslpc_device_list = NULL;
444 static int mgslpc_device_count = 0;
445
446 /*
447  * Set this param to non-zero to load eax with the
448  * .text section address and breakpoint on module load.
449  * This is useful for use with gdb and add-symbol-file command.
450  */
451 static int break_on_load=0;
452
453 /*
454  * Driver major number, defaults to zero to get auto
455  * assigned major number. May be forced as module parameter.
456  */
457 static int ttymajor=0;
458
459 static int debug_level = 0;
460 static int maxframe[MAX_DEVICE_COUNT] = {0,};
461
462 module_param(break_on_load, bool, 0);
463 module_param(ttymajor, int, 0);
464 module_param(debug_level, int, 0);
465 module_param_array(maxframe, int, NULL, 0);
466
467 MODULE_LICENSE("GPL");
468
469 static char *driver_name = "SyncLink PC Card driver";
470 static char *driver_version = "$Revision: 4.34 $";
471
472 static struct tty_driver *serial_driver;
473
474 /* number of characters left in xmit buffer before we ask for more */
475 #define WAKEUP_CHARS 256
476
477 static void mgslpc_change_params(MGSLPC_INFO *info);
478 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
479
480 /* PCMCIA prototypes */
481
482 static int mgslpc_config(struct pcmcia_device *link);
483 static void mgslpc_release(u_long arg);
484 static void mgslpc_detach(struct pcmcia_device *p_dev);
485
486 /*
487  * 1st function defined in .text section. Calling this function in
488  * init_module() followed by a breakpoint allows a remote debugger
489  * (gdb) to get the .text address for the add-symbol-file command.
490  * This allows remote debugging of dynamically loadable modules.
491  */
492 static void* mgslpc_get_text_ptr(void)
493 {
494         return mgslpc_get_text_ptr;
495 }
496
497 /**
498  * line discipline callback wrappers
499  *
500  * The wrappers maintain line discipline references
501  * while calling into the line discipline.
502  *
503  * ldisc_receive_buf  - pass receive data to line discipline
504  */
505
506 static void ldisc_receive_buf(struct tty_struct *tty,
507                               const __u8 *data, char *flags, int count)
508 {
509         struct tty_ldisc *ld;
510         if (!tty)
511                 return;
512         ld = tty_ldisc_ref(tty);
513         if (ld) {
514                 if (ld->ops->receive_buf)
515                         ld->ops->receive_buf(tty, data, flags, count);
516                 tty_ldisc_deref(ld);
517         }
518 }
519
520 static int mgslpc_probe(struct pcmcia_device *link)
521 {
522     MGSLPC_INFO *info;
523     int ret;
524
525     if (debug_level >= DEBUG_LEVEL_INFO)
526             printk("mgslpc_attach\n");
527
528     info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
529     if (!info) {
530             printk("Error can't allocate device instance data\n");
531             return -ENOMEM;
532     }
533
534     info->magic = MGSLPC_MAGIC;
535     INIT_WORK(&info->task, bh_handler);
536     info->max_frame_size = 4096;
537     info->close_delay = 5*HZ/10;
538     info->closing_wait = 30*HZ;
539     init_waitqueue_head(&info->open_wait);
540     init_waitqueue_head(&info->close_wait);
541     init_waitqueue_head(&info->status_event_wait_q);
542     init_waitqueue_head(&info->event_wait_q);
543     spin_lock_init(&info->lock);
544     spin_lock_init(&info->netlock);
545     memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
546     info->idle_mode = HDLC_TXIDLE_FLAGS;
547     info->imra_value = 0xffff;
548     info->imrb_value = 0xffff;
549     info->pim_value = 0xff;
550
551     info->p_dev = link;
552     link->priv = info;
553
554     /* Initialize the struct pcmcia_device structure */
555
556     /* Interrupt setup */
557     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
558     link->irq.IRQInfo1   = IRQ_LEVEL_ID;
559     link->irq.Handler = NULL;
560
561     link->conf.Attributes = 0;
562     link->conf.IntType = INT_MEMORY_AND_IO;
563
564     ret = mgslpc_config(link);
565     if (ret)
566             return ret;
567
568     mgslpc_add_device(info);
569
570     return 0;
571 }
572
573 /* Card has been inserted.
574  */
575
576 #define CS_CHECK(fn, ret) \
577 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
578
579 static int mgslpc_config(struct pcmcia_device *link)
580 {
581     MGSLPC_INFO *info = link->priv;
582     tuple_t tuple;
583     cisparse_t parse;
584     int last_fn, last_ret;
585     u_char buf[64];
586     cistpl_cftable_entry_t dflt = { 0 };
587     cistpl_cftable_entry_t *cfg;
588
589     if (debug_level >= DEBUG_LEVEL_INFO)
590             printk("mgslpc_config(0x%p)\n", link);
591
592     tuple.Attributes = 0;
593     tuple.TupleData = buf;
594     tuple.TupleDataMax = sizeof(buf);
595     tuple.TupleOffset = 0;
596
597     /* get CIS configuration entry */
598
599     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
600     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
601
602     cfg = &(parse.cftable_entry);
603     CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
604     CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
605
606     if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
607     if (cfg->index == 0)
608             goto cs_failed;
609
610     link->conf.ConfigIndex = cfg->index;
611     link->conf.Attributes |= CONF_ENABLE_IRQ;
612
613     /* IO window settings */
614     link->io.NumPorts1 = 0;
615     if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
616             cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
617             link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
618             if (!(io->flags & CISTPL_IO_8BIT))
619                     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
620             if (!(io->flags & CISTPL_IO_16BIT))
621                     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
622             link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
623             link->io.BasePort1 = io->win[0].base;
624             link->io.NumPorts1 = io->win[0].len;
625             CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
626     }
627
628     link->conf.Attributes = CONF_ENABLE_IRQ;
629     link->conf.IntType = INT_MEMORY_AND_IO;
630     link->conf.ConfigIndex = 8;
631     link->conf.Present = PRESENT_OPTION;
632
633     link->irq.Attributes |= IRQ_HANDLE_PRESENT;
634     link->irq.Handler     = mgslpc_isr;
635     link->irq.Instance    = info;
636     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
637
638     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
639
640     info->io_base = link->io.BasePort1;
641     info->irq_level = link->irq.AssignedIRQ;
642
643     /* add to linked list of devices */
644     sprintf(info->node.dev_name, "mgslpc0");
645     info->node.major = info->node.minor = 0;
646     link->dev_node = &info->node;
647
648     printk(KERN_INFO "%s: index 0x%02x:",
649            info->node.dev_name, link->conf.ConfigIndex);
650     if (link->conf.Attributes & CONF_ENABLE_IRQ)
651             printk(", irq %d", link->irq.AssignedIRQ);
652     if (link->io.NumPorts1)
653             printk(", io 0x%04x-0x%04x", link->io.BasePort1,
654                    link->io.BasePort1+link->io.NumPorts1-1);
655     printk("\n");
656     return 0;
657
658 cs_failed:
659     cs_error(link, last_fn, last_ret);
660     mgslpc_release((u_long)link);
661     return -ENODEV;
662 }
663
664 /* Card has been removed.
665  * Unregister device and release PCMCIA configuration.
666  * If device is open, postpone until it is closed.
667  */
668 static void mgslpc_release(u_long arg)
669 {
670         struct pcmcia_device *link = (struct pcmcia_device *)arg;
671
672         if (debug_level >= DEBUG_LEVEL_INFO)
673                 printk("mgslpc_release(0x%p)\n", link);
674
675         pcmcia_disable_device(link);
676 }
677
678 static void mgslpc_detach(struct pcmcia_device *link)
679 {
680         if (debug_level >= DEBUG_LEVEL_INFO)
681                 printk("mgslpc_detach(0x%p)\n", link);
682
683         ((MGSLPC_INFO *)link->priv)->stop = 1;
684         mgslpc_release((u_long)link);
685
686         mgslpc_remove_device((MGSLPC_INFO *)link->priv);
687 }
688
689 static int mgslpc_suspend(struct pcmcia_device *link)
690 {
691         MGSLPC_INFO *info = link->priv;
692
693         info->stop = 1;
694
695         return 0;
696 }
697
698 static int mgslpc_resume(struct pcmcia_device *link)
699 {
700         MGSLPC_INFO *info = link->priv;
701
702         info->stop = 0;
703
704         return 0;
705 }
706
707
708 static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
709                                         char *name, const char *routine)
710 {
711 #ifdef MGSLPC_PARANOIA_CHECK
712         static const char *badmagic =
713                 "Warning: bad magic number for mgsl struct (%s) in %s\n";
714         static const char *badinfo =
715                 "Warning: null mgslpc_info for (%s) in %s\n";
716
717         if (!info) {
718                 printk(badinfo, name, routine);
719                 return true;
720         }
721         if (info->magic != MGSLPC_MAGIC) {
722                 printk(badmagic, name, routine);
723                 return true;
724         }
725 #else
726         if (!info)
727                 return true;
728 #endif
729         return false;
730 }
731
732
733 #define CMD_RXFIFO      BIT7    // release current rx FIFO
734 #define CMD_RXRESET     BIT6    // receiver reset
735 #define CMD_RXFIFO_READ BIT5
736 #define CMD_START_TIMER BIT4
737 #define CMD_TXFIFO      BIT3    // release current tx FIFO
738 #define CMD_TXEOM       BIT1    // transmit end message
739 #define CMD_TXRESET     BIT0    // transmit reset
740
741 static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
742 {
743         int i = 0;
744         /* wait for command completion */
745         while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
746                 udelay(1);
747                 if (i++ == 1000)
748                         return false;
749         }
750         return true;
751 }
752
753 static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
754 {
755         wait_command_complete(info, channel);
756         write_reg(info, (unsigned char) (channel + CMDR), cmd);
757 }
758
759 static void tx_pause(struct tty_struct *tty)
760 {
761         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
762         unsigned long flags;
763
764         if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
765                 return;
766         if (debug_level >= DEBUG_LEVEL_INFO)
767                 printk("tx_pause(%s)\n",info->device_name);
768
769         spin_lock_irqsave(&info->lock,flags);
770         if (info->tx_enabled)
771                 tx_stop(info);
772         spin_unlock_irqrestore(&info->lock,flags);
773 }
774
775 static void tx_release(struct tty_struct *tty)
776 {
777         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
778         unsigned long flags;
779
780         if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
781                 return;
782         if (debug_level >= DEBUG_LEVEL_INFO)
783                 printk("tx_release(%s)\n",info->device_name);
784
785         spin_lock_irqsave(&info->lock,flags);
786         if (!info->tx_enabled)
787                 tx_start(info);
788         spin_unlock_irqrestore(&info->lock,flags);
789 }
790
791 /* Return next bottom half action to perform.
792  * or 0 if nothing to do.
793  */
794 static int bh_action(MGSLPC_INFO *info)
795 {
796         unsigned long flags;
797         int rc = 0;
798
799         spin_lock_irqsave(&info->lock,flags);
800
801         if (info->pending_bh & BH_RECEIVE) {
802                 info->pending_bh &= ~BH_RECEIVE;
803                 rc = BH_RECEIVE;
804         } else if (info->pending_bh & BH_TRANSMIT) {
805                 info->pending_bh &= ~BH_TRANSMIT;
806                 rc = BH_TRANSMIT;
807         } else if (info->pending_bh & BH_STATUS) {
808                 info->pending_bh &= ~BH_STATUS;
809                 rc = BH_STATUS;
810         }
811
812         if (!rc) {
813                 /* Mark BH routine as complete */
814                 info->bh_running = false;
815                 info->bh_requested = false;
816         }
817
818         spin_unlock_irqrestore(&info->lock,flags);
819
820         return rc;
821 }
822
823 static void bh_handler(struct work_struct *work)
824 {
825         MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
826         int action;
827
828         if (!info)
829                 return;
830
831         if (debug_level >= DEBUG_LEVEL_BH)
832                 printk( "%s(%d):bh_handler(%s) entry\n",
833                         __FILE__,__LINE__,info->device_name);
834
835         info->bh_running = true;
836
837         while((action = bh_action(info)) != 0) {
838
839                 /* Process work item */
840                 if ( debug_level >= DEBUG_LEVEL_BH )
841                         printk( "%s(%d):bh_handler() work item action=%d\n",
842                                 __FILE__,__LINE__,action);
843
844                 switch (action) {
845
846                 case BH_RECEIVE:
847                         while(rx_get_frame(info));
848                         break;
849                 case BH_TRANSMIT:
850                         bh_transmit(info);
851                         break;
852                 case BH_STATUS:
853                         bh_status(info);
854                         break;
855                 default:
856                         /* unknown work item ID */
857                         printk("Unknown work item ID=%08X!\n", action);
858                         break;
859                 }
860         }
861
862         if (debug_level >= DEBUG_LEVEL_BH)
863                 printk( "%s(%d):bh_handler(%s) exit\n",
864                         __FILE__,__LINE__,info->device_name);
865 }
866
867 static void bh_transmit(MGSLPC_INFO *info)
868 {
869         struct tty_struct *tty = info->tty;
870         if (debug_level >= DEBUG_LEVEL_BH)
871                 printk("bh_transmit() entry on %s\n", info->device_name);
872
873         if (tty)
874                 tty_wakeup(tty);
875 }
876
877 static void bh_status(MGSLPC_INFO *info)
878 {
879         info->ri_chkcount = 0;
880         info->dsr_chkcount = 0;
881         info->dcd_chkcount = 0;
882         info->cts_chkcount = 0;
883 }
884
885 /* eom: non-zero = end of frame */
886 static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
887 {
888         unsigned char data[2];
889         unsigned char fifo_count, read_count, i;
890         RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
891
892         if (debug_level >= DEBUG_LEVEL_ISR)
893                 printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom);
894
895         if (!info->rx_enabled)
896                 return;
897
898         if (info->rx_frame_count >= info->rx_buf_count) {
899                 /* no more free buffers */
900                 issue_command(info, CHA, CMD_RXRESET);
901                 info->pending_bh |= BH_RECEIVE;
902                 info->rx_overflow = true;
903                 info->icount.buf_overrun++;
904                 return;
905         }
906
907         if (eom) {
908                 /* end of frame, get FIFO count from RBCL register */
909                 if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f)))
910                         fifo_count = 32;
911         } else
912                 fifo_count = 32;
913
914         do {
915                 if (fifo_count == 1) {
916                         read_count = 1;
917                         data[0] = read_reg(info, CHA + RXFIFO);
918                 } else {
919                         read_count = 2;
920                         *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
921                 }
922                 fifo_count -= read_count;
923                 if (!fifo_count && eom)
924                         buf->status = data[--read_count];
925
926                 for (i = 0; i < read_count; i++) {
927                         if (buf->count >= info->max_frame_size) {
928                                 /* frame too large, reset receiver and reset current buffer */
929                                 issue_command(info, CHA, CMD_RXRESET);
930                                 buf->count = 0;
931                                 return;
932                         }
933                         *(buf->data + buf->count) = data[i];
934                         buf->count++;
935                 }
936         } while (fifo_count);
937
938         if (eom) {
939                 info->pending_bh |= BH_RECEIVE;
940                 info->rx_frame_count++;
941                 info->rx_put++;
942                 if (info->rx_put >= info->rx_buf_count)
943                         info->rx_put = 0;
944         }
945         issue_command(info, CHA, CMD_RXFIFO);
946 }
947
948 static void rx_ready_async(MGSLPC_INFO *info, int tcd)
949 {
950         unsigned char data, status, flag;
951         int fifo_count;
952         int work = 0;
953         struct tty_struct *tty = info->tty;
954         struct mgsl_icount *icount = &info->icount;
955
956         if (tcd) {
957                 /* early termination, get FIFO count from RBCL register */
958                 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
959
960                 /* Zero fifo count could mean 0 or 32 bytes available.
961                  * If BIT5 of STAR is set then at least 1 byte is available.
962                  */
963                 if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
964                         fifo_count = 32;
965         } else
966                 fifo_count = 32;
967
968         tty_buffer_request_room(tty, fifo_count);
969         /* Flush received async data to receive data buffer. */
970         while (fifo_count) {
971                 data   = read_reg(info, CHA + RXFIFO);
972                 status = read_reg(info, CHA + RXFIFO);
973                 fifo_count -= 2;
974
975                 icount->rx++;
976                 flag = TTY_NORMAL;
977
978                 // if no frameing/crc error then save data
979                 // BIT7:parity error
980                 // BIT6:framing error
981
982                 if (status & (BIT7 + BIT6)) {
983                         if (status & BIT7)
984                                 icount->parity++;
985                         else
986                                 icount->frame++;
987
988                         /* discard char if tty control flags say so */
989                         if (status & info->ignore_status_mask)
990                                 continue;
991
992                         status &= info->read_status_mask;
993
994                         if (status & BIT7)
995                                 flag = TTY_PARITY;
996                         else if (status & BIT6)
997                                 flag = TTY_FRAME;
998                 }
999                 work += tty_insert_flip_char(tty, data, flag);
1000         }
1001         issue_command(info, CHA, CMD_RXFIFO);
1002
1003         if (debug_level >= DEBUG_LEVEL_ISR) {
1004                 printk("%s(%d):rx_ready_async",
1005                         __FILE__,__LINE__);
1006                 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1007                         __FILE__,__LINE__,icount->rx,icount->brk,
1008                         icount->parity,icount->frame,icount->overrun);
1009         }
1010
1011         if (work)
1012                 tty_flip_buffer_push(tty);
1013 }
1014
1015
1016 static void tx_done(MGSLPC_INFO *info)
1017 {
1018         if (!info->tx_active)
1019                 return;
1020
1021         info->tx_active = false;
1022         info->tx_aborting = false;
1023
1024         if (info->params.mode == MGSL_MODE_ASYNC)
1025                 return;
1026
1027         info->tx_count = info->tx_put = info->tx_get = 0;
1028         del_timer(&info->tx_timer);
1029
1030         if (info->drop_rts_on_tx_done) {
1031                 get_signals(info);
1032                 if (info->serial_signals & SerialSignal_RTS) {
1033                         info->serial_signals &= ~SerialSignal_RTS;
1034                         set_signals(info);
1035                 }
1036                 info->drop_rts_on_tx_done = false;
1037         }
1038
1039 #if SYNCLINK_GENERIC_HDLC
1040         if (info->netcount)
1041                 hdlcdev_tx_done(info);
1042         else
1043 #endif
1044         {
1045                 if (info->tty->stopped || info->tty->hw_stopped) {
1046                         tx_stop(info);
1047                         return;
1048                 }
1049                 info->pending_bh |= BH_TRANSMIT;
1050         }
1051 }
1052
1053 static void tx_ready(MGSLPC_INFO *info)
1054 {
1055         unsigned char fifo_count = 32;
1056         int c;
1057
1058         if (debug_level >= DEBUG_LEVEL_ISR)
1059                 printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name);
1060
1061         if (info->params.mode == MGSL_MODE_HDLC) {
1062                 if (!info->tx_active)
1063                         return;
1064         } else {
1065                 if (info->tty->stopped || info->tty->hw_stopped) {
1066                         tx_stop(info);
1067                         return;
1068                 }
1069                 if (!info->tx_count)
1070                         info->tx_active = false;
1071         }
1072
1073         if (!info->tx_count)
1074                 return;
1075
1076         while (info->tx_count && fifo_count) {
1077                 c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
1078
1079                 if (c == 1) {
1080                         write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1081                 } else {
1082                         write_reg16(info, CHA + TXFIFO,
1083                                           *((unsigned short*)(info->tx_buf + info->tx_get)));
1084                 }
1085                 info->tx_count -= c;
1086                 info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1087                 fifo_count -= c;
1088         }
1089
1090         if (info->params.mode == MGSL_MODE_ASYNC) {
1091                 if (info->tx_count < WAKEUP_CHARS)
1092                         info->pending_bh |= BH_TRANSMIT;
1093                 issue_command(info, CHA, CMD_TXFIFO);
1094         } else {
1095                 if (info->tx_count)
1096                         issue_command(info, CHA, CMD_TXFIFO);
1097                 else
1098                         issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1099         }
1100 }
1101
1102 static void cts_change(MGSLPC_INFO *info)
1103 {
1104         get_signals(info);
1105         if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1106                 irq_disable(info, CHB, IRQ_CTS);
1107         info->icount.cts++;
1108         if (info->serial_signals & SerialSignal_CTS)
1109                 info->input_signal_events.cts_up++;
1110         else
1111                 info->input_signal_events.cts_down++;
1112         wake_up_interruptible(&info->status_event_wait_q);
1113         wake_up_interruptible(&info->event_wait_q);
1114
1115         if (info->flags & ASYNC_CTS_FLOW) {
1116                 if (info->tty->hw_stopped) {
1117                         if (info->serial_signals & SerialSignal_CTS) {
1118                                 if (debug_level >= DEBUG_LEVEL_ISR)
1119                                         printk("CTS tx start...");
1120                                 if (info->tty)
1121                                         info->tty->hw_stopped = 0;
1122                                 tx_start(info);
1123                                 info->pending_bh |= BH_TRANSMIT;
1124                                 return;
1125                         }
1126                 } else {
1127                         if (!(info->serial_signals & SerialSignal_CTS)) {
1128                                 if (debug_level >= DEBUG_LEVEL_ISR)
1129                                         printk("CTS tx stop...");
1130                                 if (info->tty)
1131                                         info->tty->hw_stopped = 1;
1132                                 tx_stop(info);
1133                         }
1134                 }
1135         }
1136         info->pending_bh |= BH_STATUS;
1137 }
1138
1139 static void dcd_change(MGSLPC_INFO *info)
1140 {
1141         get_signals(info);
1142         if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1143                 irq_disable(info, CHB, IRQ_DCD);
1144         info->icount.dcd++;
1145         if (info->serial_signals & SerialSignal_DCD) {
1146                 info->input_signal_events.dcd_up++;
1147         }
1148         else
1149                 info->input_signal_events.dcd_down++;
1150 #if SYNCLINK_GENERIC_HDLC
1151         if (info->netcount) {
1152                 if (info->serial_signals & SerialSignal_DCD)
1153                         netif_carrier_on(info->netdev);
1154                 else
1155                         netif_carrier_off(info->netdev);
1156         }
1157 #endif
1158         wake_up_interruptible(&info->status_event_wait_q);
1159         wake_up_interruptible(&info->event_wait_q);
1160
1161         if (info->flags & ASYNC_CHECK_CD) {
1162                 if (debug_level >= DEBUG_LEVEL_ISR)
1163                         printk("%s CD now %s...", info->device_name,
1164                                (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1165                 if (info->serial_signals & SerialSignal_DCD)
1166                         wake_up_interruptible(&info->open_wait);
1167                 else {
1168                         if (debug_level >= DEBUG_LEVEL_ISR)
1169                                 printk("doing serial hangup...");
1170                         if (info->tty)
1171                                 tty_hangup(info->tty);
1172                 }
1173         }
1174         info->pending_bh |= BH_STATUS;
1175 }
1176
1177 static void dsr_change(MGSLPC_INFO *info)
1178 {
1179         get_signals(info);
1180         if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1181                 port_irq_disable(info, PVR_DSR);
1182         info->icount.dsr++;
1183         if (info->serial_signals & SerialSignal_DSR)
1184                 info->input_signal_events.dsr_up++;
1185         else
1186                 info->input_signal_events.dsr_down++;
1187         wake_up_interruptible(&info->status_event_wait_q);
1188         wake_up_interruptible(&info->event_wait_q);
1189         info->pending_bh |= BH_STATUS;
1190 }
1191
1192 static void ri_change(MGSLPC_INFO *info)
1193 {
1194         get_signals(info);
1195         if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1196                 port_irq_disable(info, PVR_RI);
1197         info->icount.rng++;
1198         if (info->serial_signals & SerialSignal_RI)
1199                 info->input_signal_events.ri_up++;
1200         else
1201                 info->input_signal_events.ri_down++;
1202         wake_up_interruptible(&info->status_event_wait_q);
1203         wake_up_interruptible(&info->event_wait_q);
1204         info->pending_bh |= BH_STATUS;
1205 }
1206
1207 /* Interrupt service routine entry point.
1208  *
1209  * Arguments:
1210  *
1211  * irq     interrupt number that caused interrupt
1212  * dev_id  device ID supplied during interrupt registration
1213  */
1214 static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
1215 {
1216         MGSLPC_INFO *info = dev_id;
1217         unsigned short isr;
1218         unsigned char gis, pis;
1219         int count=0;
1220
1221         if (debug_level >= DEBUG_LEVEL_ISR)
1222                 printk("mgslpc_isr(%d) entry.\n", info->irq_level);
1223
1224         if (!(info->p_dev->_locked))
1225                 return IRQ_HANDLED;
1226
1227         spin_lock(&info->lock);
1228
1229         while ((gis = read_reg(info, CHA + GIS))) {
1230                 if (debug_level >= DEBUG_LEVEL_ISR)
1231                         printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1232
1233                 if ((gis & 0x70) || count > 1000) {
1234                         printk("synclink_cs:hardware failed or ejected\n");
1235                         break;
1236                 }
1237                 count++;
1238
1239                 if (gis & (BIT1 + BIT0)) {
1240                         isr = read_reg16(info, CHB + ISR);
1241                         if (isr & IRQ_DCD)
1242                                 dcd_change(info);
1243                         if (isr & IRQ_CTS)
1244                                 cts_change(info);
1245                 }
1246                 if (gis & (BIT3 + BIT2))
1247                 {
1248                         isr = read_reg16(info, CHA + ISR);
1249                         if (isr & IRQ_TIMER) {
1250                                 info->irq_occurred = true;
1251                                 irq_disable(info, CHA, IRQ_TIMER);
1252                         }
1253
1254                         /* receive IRQs */
1255                         if (isr & IRQ_EXITHUNT) {
1256                                 info->icount.exithunt++;
1257                                 wake_up_interruptible(&info->event_wait_q);
1258                         }
1259                         if (isr & IRQ_BREAK_ON) {
1260                                 info->icount.brk++;
1261                                 if (info->flags & ASYNC_SAK)
1262                                         do_SAK(info->tty);
1263                         }
1264                         if (isr & IRQ_RXTIME) {
1265                                 issue_command(info, CHA, CMD_RXFIFO_READ);
1266                         }
1267                         if (isr & (IRQ_RXEOM + IRQ_RXFIFO)) {
1268                                 if (info->params.mode == MGSL_MODE_HDLC)
1269                                         rx_ready_hdlc(info, isr & IRQ_RXEOM);
1270                                 else
1271                                         rx_ready_async(info, isr & IRQ_RXEOM);
1272                         }
1273
1274                         /* transmit IRQs */
1275                         if (isr & IRQ_UNDERRUN) {
1276                                 if (info->tx_aborting)
1277                                         info->icount.txabort++;
1278                                 else
1279                                         info->icount.txunder++;
1280                                 tx_done(info);
1281                         }
1282                         else if (isr & IRQ_ALLSENT) {
1283                                 info->icount.txok++;
1284                                 tx_done(info);
1285                         }
1286                         else if (isr & IRQ_TXFIFO)
1287                                 tx_ready(info);
1288                 }
1289                 if (gis & BIT7) {
1290                         pis = read_reg(info, CHA + PIS);
1291                         if (pis & BIT1)
1292                                 dsr_change(info);
1293                         if (pis & BIT2)
1294                                 ri_change(info);
1295                 }
1296         }
1297
1298         /* Request bottom half processing if there's something
1299          * for it to do and the bh is not already running
1300          */
1301
1302         if (info->pending_bh && !info->bh_running && !info->bh_requested) {
1303                 if ( debug_level >= DEBUG_LEVEL_ISR )
1304                         printk("%s(%d):%s queueing bh task.\n",
1305                                 __FILE__,__LINE__,info->device_name);
1306                 schedule_work(&info->task);
1307                 info->bh_requested = true;
1308         }
1309
1310         spin_unlock(&info->lock);
1311
1312         if (debug_level >= DEBUG_LEVEL_ISR)
1313                 printk("%s(%d):mgslpc_isr(%d)exit.\n",
1314                        __FILE__, __LINE__, info->irq_level);
1315
1316         return IRQ_HANDLED;
1317 }
1318
1319 /* Initialize and start device.
1320  */
1321 static int startup(MGSLPC_INFO * info)
1322 {
1323         int retval = 0;
1324
1325         if (debug_level >= DEBUG_LEVEL_INFO)
1326                 printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name);
1327
1328         if (info->flags & ASYNC_INITIALIZED)
1329                 return 0;
1330
1331         if (!info->tx_buf) {
1332                 /* allocate a page of memory for a transmit buffer */
1333                 info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1334                 if (!info->tx_buf) {
1335                         printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1336                                 __FILE__,__LINE__,info->device_name);
1337                         return -ENOMEM;
1338                 }
1339         }
1340
1341         info->pending_bh = 0;
1342
1343         memset(&info->icount, 0, sizeof(info->icount));
1344
1345         setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
1346
1347         /* Allocate and claim adapter resources */
1348         retval = claim_resources(info);
1349
1350         /* perform existance check and diagnostics */
1351         if ( !retval )
1352                 retval = adapter_test(info);
1353
1354         if ( retval ) {
1355                 if (capable(CAP_SYS_ADMIN) && info->tty)
1356                         set_bit(TTY_IO_ERROR, &info->tty->flags);
1357                 release_resources(info);
1358                 return retval;
1359         }
1360
1361         /* program hardware for current parameters */
1362         mgslpc_change_params(info);
1363
1364         if (info->tty)
1365                 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1366
1367         info->flags |= ASYNC_INITIALIZED;
1368
1369         return 0;
1370 }
1371
1372 /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1373  */
1374 static void shutdown(MGSLPC_INFO * info)
1375 {
1376         unsigned long flags;
1377
1378         if (!(info->flags & ASYNC_INITIALIZED))
1379                 return;
1380
1381         if (debug_level >= DEBUG_LEVEL_INFO)
1382                 printk("%s(%d):mgslpc_shutdown(%s)\n",
1383                          __FILE__,__LINE__, info->device_name );
1384
1385         /* clear status wait queue because status changes */
1386         /* can't happen after shutting down the hardware */
1387         wake_up_interruptible(&info->status_event_wait_q);
1388         wake_up_interruptible(&info->event_wait_q);
1389
1390         del_timer_sync(&info->tx_timer);
1391
1392         if (info->tx_buf) {
1393                 free_page((unsigned long) info->tx_buf);
1394                 info->tx_buf = NULL;
1395         }
1396
1397         spin_lock_irqsave(&info->lock,flags);
1398
1399         rx_stop(info);
1400         tx_stop(info);
1401
1402         /* TODO:disable interrupts instead of reset to preserve signal states */
1403         reset_device(info);
1404
1405         if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
1406                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1407                 set_signals(info);
1408         }
1409
1410         spin_unlock_irqrestore(&info->lock,flags);
1411
1412         release_resources(info);
1413
1414         if (info->tty)
1415                 set_bit(TTY_IO_ERROR, &info->tty->flags);
1416
1417         info->flags &= ~ASYNC_INITIALIZED;
1418 }
1419
1420 static void mgslpc_program_hw(MGSLPC_INFO *info)
1421 {
1422         unsigned long flags;
1423
1424         spin_lock_irqsave(&info->lock,flags);
1425
1426         rx_stop(info);
1427         tx_stop(info);
1428         info->tx_count = info->tx_put = info->tx_get = 0;
1429
1430         if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1431                 hdlc_mode(info);
1432         else
1433                 async_mode(info);
1434
1435         set_signals(info);
1436
1437         info->dcd_chkcount = 0;
1438         info->cts_chkcount = 0;
1439         info->ri_chkcount = 0;
1440         info->dsr_chkcount = 0;
1441
1442         irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1443         port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1444         get_signals(info);
1445
1446         if (info->netcount || info->tty->termios->c_cflag & CREAD)
1447                 rx_start(info);
1448
1449         spin_unlock_irqrestore(&info->lock,flags);
1450 }
1451
1452 /* Reconfigure adapter based on new parameters
1453  */
1454 static void mgslpc_change_params(MGSLPC_INFO *info)
1455 {
1456         unsigned cflag;
1457         int bits_per_char;
1458
1459         if (!info->tty || !info->tty->termios)
1460                 return;
1461
1462         if (debug_level >= DEBUG_LEVEL_INFO)
1463                 printk("%s(%d):mgslpc_change_params(%s)\n",
1464                          __FILE__,__LINE__, info->device_name );
1465
1466         cflag = info->tty->termios->c_cflag;
1467
1468         /* if B0 rate (hangup) specified then negate DTR and RTS */
1469         /* otherwise assert DTR and RTS */
1470         if (cflag & CBAUD)
1471                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1472         else
1473                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1474
1475         /* byte size and parity */
1476
1477         switch (cflag & CSIZE) {
1478         case CS5: info->params.data_bits = 5; break;
1479         case CS6: info->params.data_bits = 6; break;
1480         case CS7: info->params.data_bits = 7; break;
1481         case CS8: info->params.data_bits = 8; break;
1482         default:  info->params.data_bits = 7; break;
1483         }
1484
1485         if (cflag & CSTOPB)
1486                 info->params.stop_bits = 2;
1487         else
1488                 info->params.stop_bits = 1;
1489
1490         info->params.parity = ASYNC_PARITY_NONE;
1491         if (cflag & PARENB) {
1492                 if (cflag & PARODD)
1493                         info->params.parity = ASYNC_PARITY_ODD;
1494                 else
1495                         info->params.parity = ASYNC_PARITY_EVEN;
1496 #ifdef CMSPAR
1497                 if (cflag & CMSPAR)
1498                         info->params.parity = ASYNC_PARITY_SPACE;
1499 #endif
1500         }
1501
1502         /* calculate number of jiffies to transmit a full
1503          * FIFO (32 bytes) at specified data rate
1504          */
1505         bits_per_char = info->params.data_bits +
1506                         info->params.stop_bits + 1;
1507
1508         /* if port data rate is set to 460800 or less then
1509          * allow tty settings to override, otherwise keep the
1510          * current data rate.
1511          */
1512         if (info->params.data_rate <= 460800) {
1513                 info->params.data_rate = tty_get_baud_rate(info->tty);
1514         }
1515
1516         if ( info->params.data_rate ) {
1517                 info->timeout = (32*HZ*bits_per_char) /
1518                                 info->params.data_rate;
1519         }
1520         info->timeout += HZ/50;         /* Add .02 seconds of slop */
1521
1522         if (cflag & CRTSCTS)
1523                 info->flags |= ASYNC_CTS_FLOW;
1524         else
1525                 info->flags &= ~ASYNC_CTS_FLOW;
1526
1527         if (cflag & CLOCAL)
1528                 info->flags &= ~ASYNC_CHECK_CD;
1529         else
1530                 info->flags |= ASYNC_CHECK_CD;
1531
1532         /* process tty input control flags */
1533
1534         info->read_status_mask = 0;
1535         if (I_INPCK(info->tty))
1536                 info->read_status_mask |= BIT7 | BIT6;
1537         if (I_IGNPAR(info->tty))
1538                 info->ignore_status_mask |= BIT7 | BIT6;
1539
1540         mgslpc_program_hw(info);
1541 }
1542
1543 /* Add a character to the transmit buffer
1544  */
1545 static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1546 {
1547         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1548         unsigned long flags;
1549
1550         if (debug_level >= DEBUG_LEVEL_INFO) {
1551                 printk( "%s(%d):mgslpc_put_char(%d) on %s\n",
1552                         __FILE__,__LINE__,ch,info->device_name);
1553         }
1554
1555         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
1556                 return 0;
1557
1558         if (!info->tx_buf)
1559                 return 0;
1560
1561         spin_lock_irqsave(&info->lock,flags);
1562
1563         if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1564                 if (info->tx_count < TXBUFSIZE - 1) {
1565                         info->tx_buf[info->tx_put++] = ch;
1566                         info->tx_put &= TXBUFSIZE-1;
1567                         info->tx_count++;
1568                 }
1569         }
1570
1571         spin_unlock_irqrestore(&info->lock,flags);
1572         return 1;
1573 }
1574
1575 /* Enable transmitter so remaining characters in the
1576  * transmit buffer are sent.
1577  */
1578 static void mgslpc_flush_chars(struct tty_struct *tty)
1579 {
1580         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1581         unsigned long flags;
1582
1583         if (debug_level >= DEBUG_LEVEL_INFO)
1584                 printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1585                         __FILE__,__LINE__,info->device_name,info->tx_count);
1586
1587         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1588                 return;
1589
1590         if (info->tx_count <= 0 || tty->stopped ||
1591             tty->hw_stopped || !info->tx_buf)
1592                 return;
1593
1594         if (debug_level >= DEBUG_LEVEL_INFO)
1595                 printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1596                         __FILE__,__LINE__,info->device_name);
1597
1598         spin_lock_irqsave(&info->lock,flags);
1599         if (!info->tx_active)
1600                 tx_start(info);
1601         spin_unlock_irqrestore(&info->lock,flags);
1602 }
1603
1604 /* Send a block of data
1605  *
1606  * Arguments:
1607  *
1608  * tty        pointer to tty information structure
1609  * buf        pointer to buffer containing send data
1610  * count      size of send data in bytes
1611  *
1612  * Returns: number of characters written
1613  */
1614 static int mgslpc_write(struct tty_struct * tty,
1615                         const unsigned char *buf, int count)
1616 {
1617         int c, ret = 0;
1618         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1619         unsigned long flags;
1620
1621         if (debug_level >= DEBUG_LEVEL_INFO)
1622                 printk( "%s(%d):mgslpc_write(%s) count=%d\n",
1623                         __FILE__,__LINE__,info->device_name,count);
1624
1625         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
1626                 !info->tx_buf)
1627                 goto cleanup;
1628
1629         if (info->params.mode == MGSL_MODE_HDLC) {
1630                 if (count > TXBUFSIZE) {
1631                         ret = -EIO;
1632                         goto cleanup;
1633                 }
1634                 if (info->tx_active)
1635                         goto cleanup;
1636                 else if (info->tx_count)
1637                         goto start;
1638         }
1639
1640         for (;;) {
1641                 c = min(count,
1642                         min(TXBUFSIZE - info->tx_count - 1,
1643                             TXBUFSIZE - info->tx_put));
1644                 if (c <= 0)
1645                         break;
1646
1647                 memcpy(info->tx_buf + info->tx_put, buf, c);
1648
1649                 spin_lock_irqsave(&info->lock,flags);
1650                 info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1651                 info->tx_count += c;
1652                 spin_unlock_irqrestore(&info->lock,flags);
1653
1654                 buf += c;
1655                 count -= c;
1656                 ret += c;
1657         }
1658 start:
1659         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1660                 spin_lock_irqsave(&info->lock,flags);
1661                 if (!info->tx_active)
1662                         tx_start(info);
1663                 spin_unlock_irqrestore(&info->lock,flags);
1664         }
1665 cleanup:
1666         if (debug_level >= DEBUG_LEVEL_INFO)
1667                 printk( "%s(%d):mgslpc_write(%s) returning=%d\n",
1668                         __FILE__,__LINE__,info->device_name,ret);
1669         return ret;
1670 }
1671
1672 /* Return the count of free bytes in transmit buffer
1673  */
1674 static int mgslpc_write_room(struct tty_struct *tty)
1675 {
1676         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1677         int ret;
1678
1679         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1680                 return 0;
1681
1682         if (info->params.mode == MGSL_MODE_HDLC) {
1683                 /* HDLC (frame oriented) mode */
1684                 if (info->tx_active)
1685                         return 0;
1686                 else
1687                         return HDLC_MAX_FRAME_SIZE;
1688         } else {
1689                 ret = TXBUFSIZE - info->tx_count - 1;
1690                 if (ret < 0)
1691                         ret = 0;
1692         }
1693
1694         if (debug_level >= DEBUG_LEVEL_INFO)
1695                 printk("%s(%d):mgslpc_write_room(%s)=%d\n",
1696                          __FILE__,__LINE__, info->device_name, ret);
1697         return ret;
1698 }
1699
1700 /* Return the count of bytes in transmit buffer
1701  */
1702 static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1703 {
1704         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1705         int rc;
1706
1707         if (debug_level >= DEBUG_LEVEL_INFO)
1708                 printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
1709                          __FILE__,__LINE__, info->device_name );
1710
1711         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1712                 return 0;
1713
1714         if (info->params.mode == MGSL_MODE_HDLC)
1715                 rc = info->tx_active ? info->max_frame_size : 0;
1716         else
1717                 rc = info->tx_count;
1718
1719         if (debug_level >= DEBUG_LEVEL_INFO)
1720                 printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
1721                          __FILE__,__LINE__, info->device_name, rc);
1722
1723         return rc;
1724 }
1725
1726 /* Discard all data in the send buffer
1727  */
1728 static void mgslpc_flush_buffer(struct tty_struct *tty)
1729 {
1730         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1731         unsigned long flags;
1732
1733         if (debug_level >= DEBUG_LEVEL_INFO)
1734                 printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
1735                          __FILE__,__LINE__, info->device_name );
1736
1737         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1738                 return;
1739
1740         spin_lock_irqsave(&info->lock,flags);
1741         info->tx_count = info->tx_put = info->tx_get = 0;
1742         del_timer(&info->tx_timer);
1743         spin_unlock_irqrestore(&info->lock,flags);
1744
1745         wake_up_interruptible(&tty->write_wait);
1746         tty_wakeup(tty);
1747 }
1748
1749 /* Send a high-priority XON/XOFF character
1750  */
1751 static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1752 {
1753         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1754         unsigned long flags;
1755
1756         if (debug_level >= DEBUG_LEVEL_INFO)
1757                 printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
1758                          __FILE__,__LINE__, info->device_name, ch );
1759
1760         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1761                 return;
1762
1763         info->x_char = ch;
1764         if (ch) {
1765                 spin_lock_irqsave(&info->lock,flags);
1766                 if (!info->tx_enabled)
1767                         tx_start(info);
1768                 spin_unlock_irqrestore(&info->lock,flags);
1769         }
1770 }
1771
1772 /* Signal remote device to throttle send data (our receive data)
1773  */
1774 static void mgslpc_throttle(struct tty_struct * tty)
1775 {
1776         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1777         unsigned long flags;
1778
1779         if (debug_level >= DEBUG_LEVEL_INFO)
1780                 printk("%s(%d):mgslpc_throttle(%s) entry\n",
1781                          __FILE__,__LINE__, info->device_name );
1782
1783         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1784                 return;
1785
1786         if (I_IXOFF(tty))
1787                 mgslpc_send_xchar(tty, STOP_CHAR(tty));
1788
1789         if (tty->termios->c_cflag & CRTSCTS) {
1790                 spin_lock_irqsave(&info->lock,flags);
1791                 info->serial_signals &= ~SerialSignal_RTS;
1792                 set_signals(info);
1793                 spin_unlock_irqrestore(&info->lock,flags);
1794         }
1795 }
1796
1797 /* Signal remote device to stop throttling send data (our receive data)
1798  */
1799 static void mgslpc_unthrottle(struct tty_struct * tty)
1800 {
1801         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1802         unsigned long flags;
1803
1804         if (debug_level >= DEBUG_LEVEL_INFO)
1805                 printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
1806                          __FILE__,__LINE__, info->device_name );
1807
1808         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1809                 return;
1810
1811         if (I_IXOFF(tty)) {
1812                 if (info->x_char)
1813                         info->x_char = 0;
1814                 else
1815                         mgslpc_send_xchar(tty, START_CHAR(tty));
1816         }
1817
1818         if (tty->termios->c_cflag & CRTSCTS) {
1819                 spin_lock_irqsave(&info->lock,flags);
1820                 info->serial_signals |= SerialSignal_RTS;
1821                 set_signals(info);
1822                 spin_unlock_irqrestore(&info->lock,flags);
1823         }
1824 }
1825
1826 /* get the current serial statistics
1827  */
1828 static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1829 {
1830         int err;
1831         if (debug_level >= DEBUG_LEVEL_INFO)
1832                 printk("get_params(%s)\n", info->device_name);
1833         if (!user_icount) {
1834                 memset(&info->icount, 0, sizeof(info->icount));
1835         } else {
1836                 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1837                 if (err)
1838                         return -EFAULT;
1839         }
1840         return 0;
1841 }
1842
1843 /* get the current serial parameters
1844  */
1845 static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1846 {
1847         int err;
1848         if (debug_level >= DEBUG_LEVEL_INFO)
1849                 printk("get_params(%s)\n", info->device_name);
1850         COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1851         if (err)
1852                 return -EFAULT;
1853         return 0;
1854 }
1855
1856 /* set the serial parameters
1857  *
1858  * Arguments:
1859  *
1860  *      info            pointer to device instance data
1861  *      new_params      user buffer containing new serial params
1862  *
1863  * Returns:     0 if success, otherwise error code
1864  */
1865 static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params)
1866 {
1867         unsigned long flags;
1868         MGSL_PARAMS tmp_params;
1869         int err;
1870
1871         if (debug_level >= DEBUG_LEVEL_INFO)
1872                 printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
1873                         info->device_name );
1874         COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1875         if (err) {
1876                 if ( debug_level >= DEBUG_LEVEL_INFO )
1877                         printk( "%s(%d):set_params(%s) user buffer copy failed\n",
1878                                 __FILE__,__LINE__,info->device_name);
1879                 return -EFAULT;
1880         }
1881
1882         spin_lock_irqsave(&info->lock,flags);
1883         memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
1884         spin_unlock_irqrestore(&info->lock,flags);
1885
1886         mgslpc_change_params(info);
1887
1888         return 0;
1889 }
1890
1891 static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1892 {
1893         int err;
1894         if (debug_level >= DEBUG_LEVEL_INFO)
1895                 printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1896         COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1897         if (err)
1898                 return -EFAULT;
1899         return 0;
1900 }
1901
1902 static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1903 {
1904         unsigned long flags;
1905         if (debug_level >= DEBUG_LEVEL_INFO)
1906                 printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
1907         spin_lock_irqsave(&info->lock,flags);
1908         info->idle_mode = idle_mode;
1909         tx_set_idle(info);
1910         spin_unlock_irqrestore(&info->lock,flags);
1911         return 0;
1912 }
1913
1914 static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1915 {
1916         int err;
1917         if (debug_level >= DEBUG_LEVEL_INFO)
1918                 printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1919         COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1920         if (err)
1921                 return -EFAULT;
1922         return 0;
1923 }
1924
1925 static int set_interface(MGSLPC_INFO * info, int if_mode)
1926 {
1927         unsigned long flags;
1928         unsigned char val;
1929         if (debug_level >= DEBUG_LEVEL_INFO)
1930                 printk("set_interface(%s,%d)\n", info->device_name, if_mode);
1931         spin_lock_irqsave(&info->lock,flags);
1932         info->if_mode = if_mode;
1933
1934         val = read_reg(info, PVR) & 0x0f;
1935         switch (info->if_mode)
1936         {
1937         case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1938         case MGSL_INTERFACE_V35:   val |= PVR_V35;   break;
1939         case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
1940         }
1941         write_reg(info, PVR, val);
1942
1943         spin_unlock_irqrestore(&info->lock,flags);
1944         return 0;
1945 }
1946
1947 static int set_txenable(MGSLPC_INFO * info, int enable)
1948 {
1949         unsigned long flags;
1950
1951         if (debug_level >= DEBUG_LEVEL_INFO)
1952                 printk("set_txenable(%s,%d)\n", info->device_name, enable);
1953
1954         spin_lock_irqsave(&info->lock,flags);
1955         if (enable) {
1956                 if (!info->tx_enabled)
1957                         tx_start(info);
1958         } else {
1959                 if (info->tx_enabled)
1960                         tx_stop(info);
1961         }
1962         spin_unlock_irqrestore(&info->lock,flags);
1963         return 0;
1964 }
1965
1966 static int tx_abort(MGSLPC_INFO * info)
1967 {
1968         unsigned long flags;
1969
1970         if (debug_level >= DEBUG_LEVEL_INFO)
1971                 printk("tx_abort(%s)\n", info->device_name);
1972
1973         spin_lock_irqsave(&info->lock,flags);
1974         if (info->tx_active && info->tx_count &&
1975             info->params.mode == MGSL_MODE_HDLC) {
1976                 /* clear data count so FIFO is not filled on next IRQ.
1977                  * This results in underrun and abort transmission.
1978                  */
1979                 info->tx_count = info->tx_put = info->tx_get = 0;
1980                 info->tx_aborting = true;
1981         }
1982         spin_unlock_irqrestore(&info->lock,flags);
1983         return 0;
1984 }
1985
1986 static int set_rxenable(MGSLPC_INFO * info, int enable)
1987 {
1988         unsigned long flags;
1989
1990         if (debug_level >= DEBUG_LEVEL_INFO)
1991                 printk("set_rxenable(%s,%d)\n", info->device_name, enable);
1992
1993         spin_lock_irqsave(&info->lock,flags);
1994         if (enable) {
1995                 if (!info->rx_enabled)
1996                         rx_start(info);
1997         } else {
1998                 if (info->rx_enabled)
1999                         rx_stop(info);
2000         }
2001         spin_unlock_irqrestore(&info->lock,flags);
2002         return 0;
2003 }
2004
2005 /* wait for specified event to occur
2006  *
2007  * Arguments:           info    pointer to device instance data
2008  *                      mask    pointer to bitmask of events to wait for
2009  * Return Value:        0       if successful and bit mask updated with
2010  *                              of events triggerred,
2011  *                      otherwise error code
2012  */
2013 static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
2014 {
2015         unsigned long flags;
2016         int s;
2017         int rc=0;
2018         struct mgsl_icount cprev, cnow;
2019         int events;
2020         int mask;
2021         struct  _input_signal_events oldsigs, newsigs;
2022         DECLARE_WAITQUEUE(wait, current);
2023
2024         COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2025         if (rc)
2026                 return  -EFAULT;
2027
2028         if (debug_level >= DEBUG_LEVEL_INFO)
2029                 printk("wait_events(%s,%d)\n", info->device_name, mask);
2030
2031         spin_lock_irqsave(&info->lock,flags);
2032
2033         /* return immediately if state matches requested events */
2034         get_signals(info);
2035         s = info->serial_signals;
2036         events = mask &
2037                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2038                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2039                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2040                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2041         if (events) {
2042                 spin_unlock_irqrestore(&info->lock,flags);
2043                 goto exit;
2044         }
2045
2046         /* save current irq counts */
2047         cprev = info->icount;
2048         oldsigs = info->input_signal_events;
2049
2050         if ((info->params.mode == MGSL_MODE_HDLC) &&
2051             (mask & MgslEvent_ExitHuntMode))
2052                 irq_enable(info, CHA, IRQ_EXITHUNT);
2053
2054         set_current_state(TASK_INTERRUPTIBLE);
2055         add_wait_queue(&info->event_wait_q, &wait);
2056
2057         spin_unlock_irqrestore(&info->lock,flags);
2058
2059
2060         for(;;) {
2061                 schedule();
2062                 if (signal_pending(current)) {
2063                         rc = -ERESTARTSYS;
2064                         break;
2065                 }
2066
2067                 /* get current irq counts */
2068                 spin_lock_irqsave(&info->lock,flags);
2069                 cnow = info->icount;
2070                 newsigs = info->input_signal_events;
2071                 set_current_state(TASK_INTERRUPTIBLE);
2072                 spin_unlock_irqrestore(&info->lock,flags);
2073
2074                 /* if no change, wait aborted for some reason */
2075                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2076                     newsigs.dsr_down == oldsigs.dsr_down &&
2077                     newsigs.dcd_up   == oldsigs.dcd_up   &&
2078                     newsigs.dcd_down == oldsigs.dcd_down &&
2079                     newsigs.cts_up   == oldsigs.cts_up   &&
2080                     newsigs.cts_down == oldsigs.cts_down &&
2081                     newsigs.ri_up    == oldsigs.ri_up    &&
2082                     newsigs.ri_down  == oldsigs.ri_down  &&
2083                     cnow.exithunt    == cprev.exithunt   &&
2084                     cnow.rxidle      == cprev.rxidle) {
2085                         rc = -EIO;
2086                         break;
2087                 }
2088
2089                 events = mask &
2090                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2091                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2092                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2093                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2094                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2095                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2096                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2097                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2098                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2099                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2100                 if (events)
2101                         break;
2102
2103                 cprev = cnow;
2104                 oldsigs = newsigs;
2105         }
2106
2107         remove_wait_queue(&info->event_wait_q, &wait);
2108         set_current_state(TASK_RUNNING);
2109
2110         if (mask & MgslEvent_ExitHuntMode) {
2111                 spin_lock_irqsave(&info->lock,flags);
2112                 if (!waitqueue_active(&info->event_wait_q))
2113                         irq_disable(info, CHA, IRQ_EXITHUNT);
2114                 spin_unlock_irqrestore(&info->lock,flags);
2115         }
2116 exit:
2117         if (rc == 0)
2118                 PUT_USER(rc, events, mask_ptr);
2119         return rc;
2120 }
2121
2122 static int modem_input_wait(MGSLPC_INFO *info,int arg)
2123 {
2124         unsigned long flags;
2125         int rc;
2126         struct mgsl_icount cprev, cnow;
2127         DECLARE_WAITQUEUE(wait, current);
2128
2129         /* save current irq counts */
2130         spin_lock_irqsave(&info->lock,flags);
2131         cprev = info->icount;
2132         add_wait_queue(&info->status_event_wait_q, &wait);
2133         set_current_state(TASK_INTERRUPTIBLE);
2134         spin_unlock_irqrestore(&info->lock,flags);
2135
2136         for(;;) {
2137                 schedule();
2138                 if (signal_pending(current)) {
2139                         rc = -ERESTARTSYS;
2140                         break;
2141                 }
2142
2143                 /* get new irq counts */
2144                 spin_lock_irqsave(&info->lock,flags);
2145                 cnow = info->icount;
2146                 set_current_state(TASK_INTERRUPTIBLE);
2147                 spin_unlock_irqrestore(&info->lock,flags);
2148
2149                 /* if no change, wait aborted for some reason */
2150                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2151                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2152                         rc = -EIO;
2153                         break;
2154                 }
2155
2156                 /* check for change in caller specified modem input */
2157                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2158                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2159                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
2160                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2161                         rc = 0;
2162                         break;
2163                 }
2164
2165                 cprev = cnow;
2166         }
2167         remove_wait_queue(&info->status_event_wait_q, &wait);
2168         set_current_state(TASK_RUNNING);
2169         return rc;
2170 }
2171
2172 /* return the state of the serial control and status signals
2173  */
2174 static int tiocmget(struct tty_struct *tty, struct file *file)
2175 {
2176         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2177         unsigned int result;
2178         unsigned long flags;
2179
2180         spin_lock_irqsave(&info->lock,flags);
2181         get_signals(info);
2182         spin_unlock_irqrestore(&info->lock,flags);
2183
2184         result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2185                 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2186                 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2187                 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
2188                 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2189                 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2190
2191         if (debug_level >= DEBUG_LEVEL_INFO)
2192                 printk("%s(%d):%s tiocmget() value=%08X\n",
2193                          __FILE__,__LINE__, info->device_name, result );
2194         return result;
2195 }
2196
2197 /* set modem control signals (DTR/RTS)
2198  */
2199 static int tiocmset(struct tty_struct *tty, struct file *file,
2200                     unsigned int set, unsigned int clear)
2201 {
2202         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2203         unsigned long flags;
2204
2205         if (debug_level >= DEBUG_LEVEL_INFO)
2206                 printk("%s(%d):%s tiocmset(%x,%x)\n",
2207                         __FILE__,__LINE__,info->device_name, set, clear);
2208
2209         if (set & TIOCM_RTS)
2210                 info->serial_signals |= SerialSignal_RTS;
2211         if (set & TIOCM_DTR)
2212                 info->serial_signals |= SerialSignal_DTR;
2213         if (clear & TIOCM_RTS)
2214                 info->serial_signals &= ~SerialSignal_RTS;
2215         if (clear & TIOCM_DTR)
2216                 info->serial_signals &= ~SerialSignal_DTR;
2217
2218         spin_lock_irqsave(&info->lock,flags);
2219         set_signals(info);
2220         spin_unlock_irqrestore(&info->lock,flags);
2221
2222         return 0;
2223 }
2224
2225 /* Set or clear transmit break condition
2226  *
2227  * Arguments:           tty             pointer to tty instance data
2228  *                      break_state     -1=set break condition, 0=clear
2229  */
2230 static int mgslpc_break(struct tty_struct *tty, int break_state)
2231 {
2232         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2233         unsigned long flags;
2234
2235         if (debug_level >= DEBUG_LEVEL_INFO)
2236                 printk("%s(%d):mgslpc_break(%s,%d)\n",
2237                          __FILE__,__LINE__, info->device_name, break_state);
2238
2239         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
2240                 return -EINVAL;
2241
2242         spin_lock_irqsave(&info->lock,flags);
2243         if (break_state == -1)
2244                 set_reg_bits(info, CHA+DAFO, BIT6);
2245         else
2246                 clear_reg_bits(info, CHA+DAFO, BIT6);
2247         spin_unlock_irqrestore(&info->lock,flags);
2248         return 0;
2249 }
2250
2251 /* Service an IOCTL request
2252  *
2253  * Arguments:
2254  *
2255  *      tty     pointer to tty instance data
2256  *      file    pointer to associated file object for device
2257  *      cmd     IOCTL command code
2258  *      arg     command argument/context
2259  *
2260  * Return Value:        0 if success, otherwise error code
2261  */
2262 static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
2263                         unsigned int cmd, unsigned long arg)
2264 {
2265         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2266
2267         if (debug_level >= DEBUG_LEVEL_INFO)
2268                 printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2269                         info->device_name, cmd );
2270
2271         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2272                 return -ENODEV;
2273
2274         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2275             (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2276                 if (tty->flags & (1 << TTY_IO_ERROR))
2277                     return -EIO;
2278         }
2279
2280         return ioctl_common(info, cmd, arg);
2281 }
2282
2283 static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg)
2284 {
2285         int error;
2286         struct mgsl_icount cnow;        /* kernel counter temps */
2287         struct serial_icounter_struct __user *p_cuser;  /* user space */
2288         void __user *argp = (void __user *)arg;
2289         unsigned long flags;
2290
2291         switch (cmd) {
2292         case MGSL_IOCGPARAMS:
2293                 return get_params(info, argp);
2294         case MGSL_IOCSPARAMS:
2295                 return set_params(info, argp);
2296         case MGSL_IOCGTXIDLE:
2297                 return get_txidle(info, argp);
2298         case MGSL_IOCSTXIDLE:
2299                 return set_txidle(info, (int)arg);
2300         case MGSL_IOCGIF:
2301                 return get_interface(info, argp);
2302         case MGSL_IOCSIF:
2303                 return set_interface(info,(int)arg);
2304         case MGSL_IOCTXENABLE:
2305                 return set_txenable(info,(int)arg);
2306         case MGSL_IOCRXENABLE:
2307                 return set_rxenable(info,(int)arg);
2308         case MGSL_IOCTXABORT:
2309                 return tx_abort(info);
2310         case MGSL_IOCGSTATS:
2311                 return get_stats(info, argp);
2312         case MGSL_IOCWAITEVENT:
2313                 return wait_events(info, argp);
2314         case TIOCMIWAIT:
2315                 return modem_input_wait(info,(int)arg);
2316         case TIOCGICOUNT:
2317                 spin_lock_irqsave(&info->lock,flags);
2318                 cnow = info->icount;
2319                 spin_unlock_irqrestore(&info->lock,flags);
2320                 p_cuser = argp;
2321                 PUT_USER(error,cnow.cts, &p_cuser->cts);
2322                 if (error) return error;
2323                 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
2324                 if (error) return error;
2325                 PUT_USER(error,cnow.rng, &p_cuser->rng);
2326                 if (error) return error;
2327                 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
2328                 if (error) return error;
2329                 PUT_USER(error,cnow.rx, &p_cuser->rx);
2330                 if (error) return error;
2331                 PUT_USER(error,cnow.tx, &p_cuser->tx);
2332                 if (error) return error;
2333                 PUT_USER(error,cnow.frame, &p_cuser->frame);
2334                 if (error) return error;
2335                 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
2336                 if (error) return error;
2337                 PUT_USER(error,cnow.parity, &p_cuser->parity);
2338                 if (error) return error;
2339                 PUT_USER(error,cnow.brk, &p_cuser->brk);
2340                 if (error) return error;
2341                 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
2342                 if (error) return error;
2343                 return 0;
2344         default:
2345                 return -ENOIOCTLCMD;
2346         }
2347         return 0;
2348 }
2349
2350 /* Set new termios settings
2351  *
2352  * Arguments:
2353  *
2354  *      tty             pointer to tty structure
2355  *      termios         pointer to buffer to hold returned old termios
2356  */
2357 static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2358 {
2359         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2360         unsigned long flags;
2361
2362         if (debug_level >= DEBUG_LEVEL_INFO)
2363                 printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__,
2364                         tty->driver->name );
2365
2366         /* just return if nothing has changed */
2367         if ((tty->termios->c_cflag == old_termios->c_cflag)
2368             && (RELEVANT_IFLAG(tty->termios->c_iflag)
2369                 == RELEVANT_IFLAG(old_termios->c_iflag)))
2370           return;
2371
2372         mgslpc_change_params(info);
2373
2374         /* Handle transition to B0 status */
2375         if (old_termios->c_cflag & CBAUD &&
2376             !(tty->termios->c_cflag & CBAUD)) {
2377                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2378                 spin_lock_irqsave(&info->lock,flags);
2379                 set_signals(info);
2380                 spin_unlock_irqrestore(&info->lock,flags);
2381         }
2382
2383         /* Handle transition away from B0 status */
2384         if (!(old_termios->c_cflag & CBAUD) &&
2385             tty->termios->c_cflag & CBAUD) {
2386                 info->serial_signals |= SerialSignal_DTR;
2387                 if (!(tty->termios->c_cflag & CRTSCTS) ||
2388                     !test_bit(TTY_THROTTLED, &tty->flags)) {
2389                         info->serial_signals |= SerialSignal_RTS;
2390                 }
2391                 spin_lock_irqsave(&info->lock,flags);
2392                 set_signals(info);
2393                 spin_unlock_irqrestore(&info->lock,flags);
2394         }
2395
2396         /* Handle turning off CRTSCTS */
2397         if (old_termios->c_cflag & CRTSCTS &&
2398             !(tty->termios->c_cflag & CRTSCTS)) {
2399                 tty->hw_stopped = 0;
2400                 tx_release(tty);
2401         }
2402 }
2403
2404 static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2405 {
2406         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2407
2408         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2409                 return;
2410
2411         if (debug_level >= DEBUG_LEVEL_INFO)
2412                 printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
2413                          __FILE__,__LINE__, info->device_name, info->count);
2414
2415         if (!info->count)
2416                 return;
2417
2418         if (tty_hung_up_p(filp))
2419                 goto cleanup;
2420
2421         if ((tty->count == 1) && (info->count != 1)) {
2422                 /*
2423                  * tty->count is 1 and the tty structure will be freed.
2424                  * info->count should be one in this case.
2425                  * if it's not, correct it so that the port is shutdown.
2426                  */
2427                 printk("mgslpc_close: bad refcount; tty->count is 1, "
2428                        "info->count is %d\n", info->count);
2429                 info->count = 1;
2430         }
2431
2432         info->count--;
2433
2434         /* if at least one open remaining, leave hardware active */
2435         if (info->count)
2436                 goto cleanup;
2437
2438         info->flags |= ASYNC_CLOSING;
2439
2440         /* set tty->closing to notify line discipline to
2441          * only process XON/XOFF characters. Only the N_TTY
2442          * discipline appears to use this (ppp does not).
2443          */
2444         tty->closing = 1;
2445
2446         /* wait for transmit data to clear all layers */
2447
2448         if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
2449                 if (debug_level >= DEBUG_LEVEL_INFO)
2450                         printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n",
2451                                  __FILE__,__LINE__, info->device_name );
2452                 tty_wait_until_sent(tty, info->closing_wait);
2453         }
2454
2455         if (info->flags & ASYNC_INITIALIZED)
2456                 mgslpc_wait_until_sent(tty, info->timeout);
2457
2458         mgslpc_flush_buffer(tty);
2459
2460         tty_ldisc_flush(tty);
2461
2462         shutdown(info);
2463
2464         tty->closing = 0;
2465         info->tty = NULL;
2466
2467         if (info->blocked_open) {
2468                 if (info->close_delay) {
2469                         msleep_interruptible(jiffies_to_msecs(info->close_delay));
2470                 }
2471                 wake_up_interruptible(&info->open_wait);
2472         }
2473
2474         info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
2475
2476         wake_up_interruptible(&info->close_wait);
2477
2478 cleanup:
2479         if (debug_level >= DEBUG_LEVEL_INFO)
2480                 printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__,
2481                         tty->driver->name, info->count);
2482 }
2483
2484 /* Wait until the transmitter is empty.
2485  */
2486 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2487 {
2488         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2489         unsigned long orig_jiffies, char_time;
2490
2491         if (!info )
2492                 return;
2493
2494         if (debug_level >= DEBUG_LEVEL_INFO)
2495                 printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
2496                          __FILE__,__LINE__, info->device_name );
2497
2498         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2499                 return;
2500
2501         if (!(info->flags & ASYNC_INITIALIZED))
2502                 goto exit;
2503
2504         orig_jiffies = jiffies;
2505
2506         /* Set check interval to 1/5 of estimated time to
2507          * send a character, and make it at least 1. The check
2508          * interval should also be less than the timeout.
2509          * Note: use tight timings here to satisfy the NIST-PCTS.
2510          */
2511
2512         if ( info->params.data_rate ) {
2513                 char_time = info->timeout/(32 * 5);
2514                 if (!char_time)
2515                         char_time++;
2516         } else
2517                 char_time = 1;
2518
2519         if (timeout)
2520                 char_time = min_t(unsigned long, char_time, timeout);
2521
2522         if (info->params.mode == MGSL_MODE_HDLC) {
2523                 while (info->tx_active) {
2524                         msleep_interruptible(jiffies_to_msecs(char_time));
2525                         if (signal_pending(current))
2526                                 break;
2527                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
2528                                 break;
2529                 }
2530         } else {
2531                 while ((info->tx_count || info->tx_active) &&
2532                         info->tx_enabled) {
2533                         msleep_interruptible(jiffies_to_msecs(char_time));
2534                         if (signal_pending(current))
2535                                 break;
2536                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
2537                                 break;
2538                 }
2539         }
2540
2541 exit:
2542         if (debug_level >= DEBUG_LEVEL_INFO)
2543                 printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
2544                          __FILE__,__LINE__, info->device_name );
2545 }
2546
2547 /* Called by tty_hangup() when a hangup is signaled.
2548  * This is the same as closing all open files for the port.
2549  */
2550 static void mgslpc_hangup(struct tty_struct *tty)
2551 {
2552         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2553
2554         if (debug_level >= DEBUG_LEVEL_INFO)
2555                 printk("%s(%d):mgslpc_hangup(%s)\n",
2556                          __FILE__,__LINE__, info->device_name );
2557
2558         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2559                 return;
2560
2561         mgslpc_flush_buffer(tty);
2562         shutdown(info);
2563
2564         info->count = 0;
2565         info->flags &= ~ASYNC_NORMAL_ACTIVE;
2566         info->tty = NULL;
2567
2568         wake_up_interruptible(&info->open_wait);
2569 }
2570
2571 /* Block the current process until the specified port
2572  * is ready to be opened.
2573  */
2574 static int block_til_ready(struct tty_struct *tty, struct file *filp,
2575                            MGSLPC_INFO *info)
2576 {
2577         DECLARE_WAITQUEUE(wait, current);
2578         int             retval;
2579         bool            do_clocal = false;
2580         bool            extra_count = false;
2581         unsigned long   flags;
2582
2583         if (debug_level >= DEBUG_LEVEL_INFO)
2584                 printk("%s(%d):block_til_ready on %s\n",
2585                          __FILE__,__LINE__, tty->driver->name );
2586
2587         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
2588                 /* nonblock mode is set or port is not enabled */
2589                 /* just verify that callout device is not active */
2590                 info->flags |= ASYNC_NORMAL_ACTIVE;
2591                 return 0;
2592         }
2593
2594         if (tty->termios->c_cflag & CLOCAL)
2595                 do_clocal = true;
2596
2597         /* Wait for carrier detect and the line to become
2598          * free (i.e., not in use by the callout).  While we are in
2599          * this loop, info->count is dropped by one, so that
2600          * mgslpc_close() knows when to free things.  We restore it upon
2601          * exit, either normal or abnormal.
2602          */
2603
2604         retval = 0;
2605         add_wait_queue(&info->open_wait, &wait);
2606
2607         if (debug_level >= DEBUG_LEVEL_INFO)
2608                 printk("%s(%d):block_til_ready before block on %s count=%d\n",
2609                          __FILE__,__LINE__, tty->driver->name, info->count );
2610
2611         spin_lock_irqsave(&info->lock, flags);
2612         if (!tty_hung_up_p(filp)) {
2613                 extra_count = true;
2614                 info->count--;
2615         }
2616         spin_unlock_irqrestore(&info->lock, flags);
2617         info->blocked_open++;
2618
2619         while (1) {
2620                 if ((tty->termios->c_cflag & CBAUD)) {
2621                         spin_lock_irqsave(&info->lock,flags);
2622                         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2623                         set_signals(info);
2624                         spin_unlock_irqrestore(&info->lock,flags);
2625                 }
2626
2627                 set_current_state(TASK_INTERRUPTIBLE);
2628
2629                 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
2630                         retval = (info->flags & ASYNC_HUP_NOTIFY) ?
2631                                         -EAGAIN : -ERESTARTSYS;
2632                         break;
2633                 }
2634
2635                 spin_lock_irqsave(&info->lock,flags);
2636                 get_signals(info);
2637                 spin_unlock_irqrestore(&info->lock,flags);
2638
2639                 if (!(info->flags & ASYNC_CLOSING) &&
2640                     (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
2641                         break;
2642                 }
2643
2644                 if (signal_pending(current)) {
2645                         retval = -ERESTARTSYS;
2646                         break;
2647                 }
2648
2649                 if (debug_level >= DEBUG_LEVEL_INFO)
2650                         printk("%s(%d):block_til_ready blocking on %s count=%d\n",
2651                                  __FILE__,__LINE__, tty->driver->name, info->count );
2652
2653                 schedule();
2654         }
2655
2656         set_current_state(TASK_RUNNING);
2657         remove_wait_queue(&info->open_wait, &wait);
2658
2659         if (extra_count)
2660                 info->count++;
2661         info->blocked_open--;
2662
2663         if (debug_level >= DEBUG_LEVEL_INFO)
2664                 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
2665                          __FILE__,__LINE__, tty->driver->name, info->count );
2666
2667         if (!retval)
2668                 info->flags |= ASYNC_NORMAL_ACTIVE;
2669
2670         return retval;
2671 }
2672
2673 static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2674 {
2675         MGSLPC_INFO     *info;
2676         int                     retval, line;
2677         unsigned long flags;
2678
2679         /* verify range of specified line number */
2680         line = tty->index;
2681         if ((line < 0) || (line >= mgslpc_device_count)) {
2682                 printk("%s(%d):mgslpc_open with invalid line #%d.\n",
2683                         __FILE__,__LINE__,line);
2684                 return -ENODEV;
2685         }
2686
2687         /* find the info structure for the specified line */
2688         info = mgslpc_device_list;
2689         while(info && info->line != line)
2690                 info = info->next_device;
2691         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2692                 return -ENODEV;
2693
2694         tty->driver_data = info;
2695         info->tty = tty;
2696
2697         if (debug_level >= DEBUG_LEVEL_INFO)
2698                 printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
2699                          __FILE__,__LINE__,tty->driver->name, info->count);
2700
2701         /* If port is closing, signal caller to try again */
2702         if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
2703                 if (info->flags & ASYNC_CLOSING)
2704                         interruptible_sleep_on(&info->close_wait);
2705                 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
2706                         -EAGAIN : -ERESTARTSYS);
2707                 goto cleanup;
2708         }
2709
2710         info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2711
2712         spin_lock_irqsave(&info->netlock, flags);
2713         if (info->netcount) {
2714                 retval = -EBUSY;
2715                 spin_unlock_irqrestore(&info->netlock, flags);
2716                 goto cleanup;
2717         }
2718         info->count++;
2719         spin_unlock_irqrestore(&info->netlock, flags);
2720
2721         if (info->count == 1) {
2722                 /* 1st open on this device, init hardware */
2723                 retval = startup(info);
2724                 if (retval < 0)
2725                         goto cleanup;
2726         }
2727
2728         retval = block_til_ready(tty, filp, info);
2729         if (retval) {
2730                 if (debug_level >= DEBUG_LEVEL_INFO)
2731                         printk("%s(%d):block_til_ready(%s) returned %d\n",
2732                                  __FILE__,__LINE__, info->device_name, retval);
2733                 goto cleanup;
2734         }
2735
2736         if (debug_level >= DEBUG_LEVEL_INFO)
2737                 printk("%s(%d):mgslpc_open(%s) success\n",
2738                          __FILE__,__LINE__, info->device_name);
2739         retval = 0;
2740
2741 cleanup:
2742         if (retval) {
2743                 if (tty->count == 1)
2744                         info->tty = NULL; /* tty layer will release tty struct */
2745                 if(info->count)
2746                         info->count--;
2747         }
2748
2749         return retval;
2750 }
2751
2752 /*
2753  * /proc fs routines....
2754  */
2755
2756 static inline int line_info(char *buf, MGSLPC_INFO *info)
2757 {
2758         char    stat_buf[30];
2759         int     ret;
2760         unsigned long flags;
2761
2762         ret = sprintf(buf, "%s:io:%04X irq:%d",
2763                       info->device_name, info->io_base, info->irq_level);
2764
2765         /* output current serial signal states */
2766         spin_lock_irqsave(&info->lock,flags);
2767         get_signals(info);
2768         spin_unlock_irqrestore(&info->lock,flags);
2769
2770         stat_buf[0] = 0;
2771         stat_buf[1] = 0;
2772         if (info->serial_signals & SerialSignal_RTS)
2773                 strcat(stat_buf, "|RTS");
2774         if (info->serial_signals & SerialSignal_CTS)
2775                 strcat(stat_buf, "|CTS");
2776         if (info->serial_signals & SerialSignal_DTR)
2777                 strcat(stat_buf, "|DTR");
2778         if (info->serial_signals & SerialSignal_DSR)
2779                 strcat(stat_buf, "|DSR");
2780         if (info->serial_signals & SerialSignal_DCD)
2781                 strcat(stat_buf, "|CD");
2782         if (info->serial_signals & SerialSignal_RI)
2783                 strcat(stat_buf, "|RI");
2784
2785         if (info->params.mode == MGSL_MODE_HDLC) {
2786                 ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
2787                               info->icount.txok, info->icount.rxok);
2788                 if (info->icount.txunder)
2789                         ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
2790                 if (info->icount.txabort)
2791                         ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
2792                 if (info->icount.rxshort)
2793                         ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
2794                 if (info->icount.rxlong)
2795                         ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
2796                 if (info->icount.rxover)
2797                         ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
2798                 if (info->icount.rxcrc)
2799                         ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
2800         } else {
2801                 ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
2802                               info->icount.tx, info->icount.rx);
2803                 if (info->icount.frame)
2804                         ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
2805                 if (info->icount.parity)
2806                         ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
2807                 if (info->icount.brk)
2808                         ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
2809                 if (info->icount.overrun)
2810                         ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
2811         }
2812
2813         /* Append serial signal status to end */
2814         ret += sprintf(buf+ret, " %s\n", stat_buf+1);
2815
2816         ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
2817                        info->tx_active,info->bh_requested,info->bh_running,
2818                        info->pending_bh);
2819
2820         return ret;
2821 }
2822
2823 /* Called to print information about devices
2824  */
2825 static int mgslpc_read_proc(char *page, char **start, off_t off, int count,
2826                  int *eof, void *data)
2827 {
2828         int len = 0, l;
2829         off_t   begin = 0;
2830         MGSLPC_INFO *info;
2831
2832         len += sprintf(page, "synclink driver:%s\n", driver_version);
2833
2834         info = mgslpc_device_list;
2835         while( info ) {
2836                 l = line_info(page + len, info);
2837                 len += l;
2838                 if (len+begin > off+count)
2839                         goto done;
2840                 if (len+begin < off) {
2841                         begin += len;
2842                         len = 0;
2843                 }
2844                 info = info->next_device;
2845         }
2846
2847         *eof = 1;
2848 done:
2849         if (off >= len+begin)
2850                 return 0;
2851         *start = page + (off-begin);
2852         return ((count < begin+len-off) ? count : begin+len-off);
2853 }
2854
2855 static int rx_alloc_buffers(MGSLPC_INFO *info)
2856 {
2857         /* each buffer has header and data */
2858         info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2859
2860         /* calculate total allocation size for 8 buffers */
2861         info->rx_buf_total_size = info->rx_buf_size * 8;
2862
2863         /* limit total allocated memory */
2864         if (info->rx_buf_total_size > 0x10000)
2865                 info->rx_buf_total_size = 0x10000;
2866
2867         /* calculate number of buffers */
2868         info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2869
2870         info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2871         if (info->rx_buf == NULL)
2872                 return -ENOMEM;
2873
2874         rx_reset_buffers(info);
2875         return 0;
2876 }
2877
2878 static void rx_free_buffers(MGSLPC_INFO *info)
2879 {
2880         kfree(info->rx_buf);
2881         info->rx_buf = NULL;
2882 }
2883
2884 static int claim_resources(MGSLPC_INFO *info)
2885 {
2886         if (rx_alloc_buffers(info) < 0 ) {
2887                 printk( "Cant allocate rx buffer %s\n", info->device_name);
2888                 release_resources(info);
2889                 return -ENODEV;
2890         }
2891         return 0;
2892 }
2893
2894 static void release_resources(MGSLPC_INFO *info)
2895 {
2896         if (debug_level >= DEBUG_LEVEL_INFO)
2897                 printk("release_resources(%s)\n", info->device_name);
2898         rx_free_buffers(info);
2899 }
2900
2901 /* Add the specified device instance data structure to the
2902  * global linked list of devices and increment the device count.
2903  *
2904  * Arguments:           info    pointer to device instance data
2905  */
2906 static void mgslpc_add_device(MGSLPC_INFO *info)
2907 {
2908         info->next_device = NULL;
2909         info->line = mgslpc_device_count;
2910         sprintf(info->device_name,"ttySLP%d",info->line);
2911
2912         if (info->line < MAX_DEVICE_COUNT) {
2913                 if (maxframe[info->line])
2914                         info->max_frame_size = maxframe[info->line];
2915         }
2916
2917         mgslpc_device_count++;
2918
2919         if (!mgslpc_device_list)
2920                 mgslpc_device_list = info;
2921         else {
2922                 MGSLPC_INFO *current_dev = mgslpc_device_list;
2923                 while( current_dev->next_device )
2924                         current_dev = current_dev->next_device;
2925                 current_dev->next_device = info;
2926         }
2927
2928         if (info->max_frame_size < 4096)
2929                 info->max_frame_size = 4096;
2930         else if (info->max_frame_size > 65535)
2931                 info->max_frame_size = 65535;
2932
2933         printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n",
2934                 info->device_name, info->io_base, info->irq_level);
2935
2936 #if SYNCLINK_GENERIC_HDLC
2937         hdlcdev_init(info);
2938 #endif
2939 }
2940
2941 static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
2942 {
2943         MGSLPC_INFO *info = mgslpc_device_list;
2944         MGSLPC_INFO *last = NULL;
2945
2946         while(info) {
2947                 if (info == remove_info) {
2948                         if (last)
2949                                 last->next_device = info->next_device;
2950                         else
2951                                 mgslpc_device_list = info->next_device;
2952 #if SYNCLINK_GENERIC_HDLC
2953                         hdlcdev_exit(info);
2954 #endif
2955                         release_resources(info);
2956                         kfree(info);
2957                         mgslpc_device_count--;
2958                         return;
2959                 }
2960                 last = info;
2961                 info = info->next_device;
2962         }
2963 }
2964
2965 static struct pcmcia_device_id mgslpc_ids[] = {
2966         PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
2967         PCMCIA_DEVICE_NULL
2968 };
2969 MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
2970
2971 static struct pcmcia_driver mgslpc_driver = {
2972         .owner          = THIS_MODULE,
2973         .drv            = {
2974                 .name   = "synclink_cs",
2975         },
2976         .probe          = mgslpc_probe,
2977         .remove         = mgslpc_detach,
2978         .id_table       = mgslpc_ids,
2979         .suspend        = mgslpc_suspend,
2980         .resume         = mgslpc_resume,
2981 };
2982
2983 static const struct tty_operations mgslpc_ops = {
2984         .open = mgslpc_open,
2985         .close = mgslpc_close,
2986         .write = mgslpc_write,
2987         .put_char = mgslpc_put_char,
2988         .flush_chars = mgslpc_flush_chars,
2989         .write_room = mgslpc_write_room,
2990         .chars_in_buffer = mgslpc_chars_in_buffer,
2991         .flush_buffer = mgslpc_flush_buffer,
2992         .ioctl = mgslpc_ioctl,
2993         .throttle = mgslpc_throttle,
2994         .unthrottle = mgslpc_unthrottle,
2995         .send_xchar = mgslpc_send_xchar,
2996         .break_ctl = mgslpc_break,
2997         .wait_until_sent = mgslpc_wait_until_sent,
2998         .read_proc = mgslpc_read_proc,
2999         .set_termios = mgslpc_set_termios,
3000         .stop = tx_pause,
3001         .start = tx_release,
3002         .hangup = mgslpc_hangup,
3003         .tiocmget = tiocmget,
3004         .tiocmset = tiocmset,
3005 };
3006
3007 static void synclink_cs_cleanup(void)
3008 {
3009         int rc;
3010
3011         printk("Unloading %s: version %s\n", driver_name, driver_version);
3012
3013         while(mgslpc_device_list)
3014                 mgslpc_remove_device(mgslpc_device_list);
3015
3016         if (serial_driver) {
3017                 if ((rc = tty_unregister_driver(serial_driver)))
3018                         printk("%s(%d) failed to unregister tty driver err=%d\n",
3019                                __FILE__,__LINE__,rc);
3020                 put_tty_driver(serial_driver);
3021         }
3022
3023         pcmcia_unregister_driver(&mgslpc_driver);
3024 }
3025
3026 static int __init synclink_cs_init(void)
3027 {
3028     int rc;
3029
3030     if (break_on_load) {
3031             mgslpc_get_text_ptr();
3032             BREAKPOINT();
3033     }
3034
3035     printk("%s %s\n", driver_name, driver_version);
3036
3037     if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
3038             return rc;
3039
3040     serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
3041     if (!serial_driver) {
3042             rc = -ENOMEM;
3043             goto error;
3044     }
3045
3046     /* Initialize the tty_driver structure */
3047
3048     serial_driver->owner = THIS_MODULE;
3049     serial_driver->driver_name = "synclink_cs";
3050     serial_driver->name = "ttySLP";
3051     serial_driver->major = ttymajor;
3052     serial_driver->minor_start = 64;
3053     serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3054     serial_driver->subtype = SERIAL_TYPE_NORMAL;
3055     serial_driver->init_termios = tty_std_termios;
3056     serial_driver->init_termios.c_cflag =
3057             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3058     serial_driver->flags = TTY_DRIVER_REAL_RAW;
3059     tty_set_operations(serial_driver, &mgslpc_ops);
3060
3061     if ((rc = tty_register_driver(serial_driver)) < 0) {
3062             printk("%s(%d):Couldn't register serial driver\n",
3063                    __FILE__,__LINE__);
3064             put_tty_driver(serial_driver);
3065             serial_driver = NULL;
3066             goto error;
3067     }
3068
3069     printk("%s %s, tty major#%d\n",
3070            driver_name, driver_version,
3071            serial_driver->major);
3072
3073     return 0;
3074
3075 error:
3076     synclink_cs_cleanup();
3077     return rc;
3078 }
3079
3080 static void __exit synclink_cs_exit(void)
3081 {
3082         synclink_cs_cleanup();
3083 }
3084
3085 module_init(synclink_cs_init);
3086 module_exit(synclink_cs_exit);
3087
3088 static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
3089 {
3090         unsigned int M, N;
3091         unsigned char val;
3092
3093         /* note:standard BRG mode is broken in V3.2 chip
3094          * so enhanced mode is always used
3095          */
3096
3097         if (rate) {
3098                 N = 3686400 / rate;
3099                 if (!N)
3100                         N = 1;
3101                 N >>= 1;
3102                 for (M = 1; N > 64 && M < 16; M++)
3103                         N >>= 1;
3104                 N--;
3105
3106                 /* BGR[5..0] = N
3107                  * BGR[9..6] = M
3108                  * BGR[7..0] contained in BGR register
3109                  * BGR[9..8] contained in CCR2[7..6]
3110                  * divisor = (N+1)*2^M
3111                  *
3112                  * Note: M *must* not be zero (causes asymetric duty cycle)
3113                  */
3114                 write_reg(info, (unsigned char) (channel + BGR),
3115                                   (unsigned char) ((M << 6) + N));
3116                 val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
3117                 val |= ((M << 4) & 0xc0);
3118                 write_reg(info, (unsigned char) (channel + CCR2), val);
3119         }
3120 }
3121
3122 /* Enabled the AUX clock output at the specified frequency.
3123  */
3124 static void enable_auxclk(MGSLPC_INFO *info)
3125 {
3126         unsigned char val;
3127
3128         /* MODE
3129          *
3130          * 07..06  MDS[1..0] 10 = transparent HDLC mode
3131          * 05      ADM Address Mode, 0 = no addr recognition
3132          * 04      TMD Timer Mode, 0 = external
3133          * 03      RAC Receiver Active, 0 = inactive
3134          * 02      RTS 0=RTS active during xmit, 1=RTS always active
3135          * 01      TRS Timer Resolution, 1=512
3136          * 00      TLP Test Loop, 0 = no loop
3137          *
3138          * 1000 0010
3139          */
3140         val = 0x82;
3141
3142         /* channel B RTS is used to enable AUXCLK driver on SP505 */
3143         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3144                 val |= BIT2;
3145         write_reg(info, CHB + MODE, val);
3146
3147         /* CCR0
3148          *
3149          * 07      PU Power Up, 1=active, 0=power down
3150          * 06      MCE Master Clock Enable, 1=enabled
3151          * 05      Reserved, 0
3152          * 04..02  SC[2..0] Encoding
3153          * 01..00  SM[1..0] Serial Mode, 00=HDLC
3154          *
3155          * 11000000
3156          */
3157         write_reg(info, CHB + CCR0, 0xc0);
3158
3159         /* CCR1
3160          *
3161          * 07      SFLG Shared Flag, 0 = disable shared flags
3162          * 06      GALP Go Active On Loop, 0 = not used
3163          * 05      GLP Go On Loop, 0 = not used
3164          * 04      ODS Output Driver Select, 1=TxD is push-pull output
3165          * 03      ITF Interframe Time Fill, 0=mark, 1=flag
3166          * 02..00  CM[2..0] Clock Mode
3167          *
3168          * 0001 0111
3169          */
3170         write_reg(info, CHB + CCR1, 0x17);
3171
3172         /* CCR2 (Channel B)
3173          *
3174          * 07..06  BGR[9..8] Baud rate bits 9..8
3175          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3176          * 04      SSEL Clock source select, 1=submode b
3177          * 03      TOE 0=TxCLK is input, 1=TxCLK is output
3178          * 02      RWX Read/Write Exchange 0=disabled
3179          * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
3180          * 00      DIV, data inversion 0=disabled, 1=enabled
3181          *
3182          * 0011 1000
3183          */
3184         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3185                 write_reg(info, CHB + CCR2, 0x38);
3186         else
3187                 write_reg(info, CHB + CCR2, 0x30);
3188
3189         /* CCR4
3190          *
3191          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3192          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3193          * 05      TST1 Test Pin, 0=normal operation
3194          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3195          * 03..02  Reserved, must be 0
3196          * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
3197          *
3198          * 0101 0000
3199          */
3200         write_reg(info, CHB + CCR4, 0x50);
3201
3202         /* if auxclk not enabled, set internal BRG so
3203          * CTS transitions can be detected (requires TxC)
3204          */
3205         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3206                 mgslpc_set_rate(info, CHB, info->params.clock_speed);
3207         else
3208                 mgslpc_set_rate(info, CHB, 921600);
3209 }
3210
3211 static void loopback_enable(MGSLPC_INFO *info)
3212 {
3213         unsigned char val;
3214
3215         /* CCR1:02..00  CM[2..0] Clock Mode = 111 (clock mode 7) */
3216         val = read_reg(info, CHA + CCR1) | (BIT2 + BIT1 + BIT0);
3217         write_reg(info, CHA + CCR1, val);
3218
3219         /* CCR2:04 SSEL Clock source select, 1=submode b */
3220         val = read_reg(info, CHA + CCR2) | (BIT4 + BIT5);
3221         write_reg(info, CHA + CCR2, val);
3222
3223         /* set LinkSpeed if available, otherwise default to 2Mbps */
3224         if (info->params.clock_speed)
3225                 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3226         else
3227                 mgslpc_set_rate(info, CHA, 1843200);
3228
3229         /* MODE:00 TLP Test Loop, 1=loopback enabled */
3230         val = read_reg(info, CHA + MODE) | BIT0;
3231         write_reg(info, CHA + MODE, val);
3232 }
3233
3234 static void hdlc_mode(MGSLPC_INFO *info)
3235 {
3236         unsigned char val;
3237         unsigned char clkmode, clksubmode;
3238
3239         /* disable all interrupts */
3240         irq_disable(info, CHA, 0xffff);
3241         irq_disable(info, CHB, 0xffff);
3242         port_irq_disable(info, 0xff);
3243
3244         /* assume clock mode 0a, rcv=RxC xmt=TxC */
3245         clkmode = clksubmode = 0;
3246         if (info->params.flags & HDLC_FLAG_RXC_DPLL
3247             && info->params.flags & HDLC_FLAG_TXC_DPLL) {
3248                 /* clock mode 7a, rcv = DPLL, xmt = DPLL */
3249                 clkmode = 7;
3250         } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3251                  && info->params.flags & HDLC_FLAG_TXC_BRG) {
3252                 /* clock mode 7b, rcv = BRG, xmt = BRG */
3253                 clkmode = 7;
3254                 clksubmode = 1;
3255         } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3256                 if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3257                         /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
3258                         clkmode = 6;
3259                         clksubmode = 1;
3260                 } else {
3261                         /* clock mode 6a, rcv = DPLL, xmt = TxC */
3262                         clkmode = 6;
3263                 }
3264         } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3265                 /* clock mode 0b, rcv = RxC, xmt = BRG */
3266                 clksubmode = 1;
3267         }
3268
3269         /* MODE
3270          *
3271          * 07..06  MDS[1..0] 10 = transparent HDLC mode
3272          * 05      ADM Address Mode, 0 = no addr recognition
3273          * 04      TMD Timer Mode, 0 = external
3274          * 03      RAC Receiver Active, 0 = inactive
3275          * 02      RTS 0=RTS active during xmit, 1=RTS always active
3276          * 01      TRS Timer Resolution, 1=512
3277          * 00      TLP Test Loop, 0 = no loop
3278          *
3279          * 1000 0010
3280          */
3281         val = 0x82;
3282         if (info->params.loopback)
3283                 val |= BIT0;
3284
3285         /* preserve RTS state */
3286         if (info->serial_signals & SerialSignal_RTS)
3287                 val |= BIT2;
3288         write_reg(info, CHA + MODE, val);
3289
3290         /* CCR0
3291          *
3292          * 07      PU Power Up, 1=active, 0=power down
3293          * 06      MCE Master Clock Enable, 1=enabled
3294          * 05      Reserved, 0
3295          * 04..02  SC[2..0] Encoding
3296          * 01..00  SM[1..0] Serial Mode, 00=HDLC
3297          *
3298          * 11000000
3299          */
3300         val = 0xc0;
3301         switch (info->params.encoding)
3302         {
3303         case HDLC_ENCODING_NRZI:
3304                 val |= BIT3;
3305                 break;
3306         case HDLC_ENCODING_BIPHASE_SPACE:
3307                 val |= BIT4;
3308                 break;          // FM0
3309         case HDLC_ENCODING_BIPHASE_MARK:
3310                 val |= BIT4 + BIT2;
3311                 break;          // FM1
3312         case HDLC_ENCODING_BIPHASE_LEVEL:
3313                 val |= BIT4 + BIT3;
3314                 break;          // Manchester
3315         }
3316         write_reg(info, CHA + CCR0, val);
3317
3318         /* CCR1
3319          *
3320          * 07      SFLG Shared Flag, 0 = disable shared flags
3321          * 06      GALP Go Active On Loop, 0 = not used
3322          * 05      GLP Go On Loop, 0 = not used
3323          * 04      ODS Output Driver Select, 1=TxD is push-pull output
3324          * 03      ITF Interframe Time Fill, 0=mark, 1=flag
3325          * 02..00  CM[2..0] Clock Mode
3326          *
3327          * 0001 0000
3328          */
3329         val = 0x10 + clkmode;
3330         write_reg(info, CHA + CCR1, val);
3331
3332         /* CCR2
3333          *
3334          * 07..06  BGR[9..8] Baud rate bits 9..8
3335          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3336          * 04      SSEL Clock source select, 1=submode b
3337          * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3338          * 02      RWX Read/Write Exchange 0=disabled
3339          * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
3340          * 00      DIV, data inversion 0=disabled, 1=enabled
3341          *
3342          * 0000 0000
3343          */
3344         val = 0x00;
3345         if (clkmode == 2 || clkmode == 3 || clkmode == 6
3346             || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3347                 val |= BIT5;
3348         if (clksubmode)
3349                 val |= BIT4;
3350         if (info->params.crc_type == HDLC_CRC_32_CCITT)
3351                 val |= BIT1;
3352         if (info->params.encoding == HDLC_ENCODING_NRZB)
3353                 val |= BIT0;
3354         write_reg(info, CHA + CCR2, val);
3355
3356         /* CCR3
3357          *
3358          * 07..06  PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3359          * 05      EPT Enable preamble transmission, 1=enabled
3360          * 04      RADD Receive address pushed to FIFO, 0=disabled
3361          * 03      CRL CRC Reset Level, 0=FFFF
3362          * 02      RCRC Rx CRC 0=On 1=Off
3363          * 01      TCRC Tx CRC 0=On 1=Off
3364          * 00      PSD DPLL Phase Shift Disable
3365          *
3366          * 0000 0000
3367          */
3368         val = 0x00;
3369         if (info->params.crc_type == HDLC_CRC_NONE)
3370                 val |= BIT2 + BIT1;
3371         if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3372                 val |= BIT5;
3373         switch (info->params.preamble_length)
3374         {
3375         case HDLC_PREAMBLE_LENGTH_16BITS:
3376                 val |= BIT6;
3377                 break;
3378         case HDLC_PREAMBLE_LENGTH_32BITS:
3379                 val |= BIT6;
3380                 break;
3381         case HDLC_PREAMBLE_LENGTH_64BITS:
3382                 val |= BIT7 + BIT6;
3383                 break;
3384         }
3385         write_reg(info, CHA + CCR3, val);
3386
3387         /* PRE - Preamble pattern */
3388         val = 0;
3389         switch (info->params.preamble)
3390         {
3391         case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3392         case HDLC_PREAMBLE_PATTERN_10:    val = 0xaa; break;
3393         case HDLC_PREAMBLE_PATTERN_01:    val = 0x55; break;
3394         case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
3395         }
3396         write_reg(info, CHA + PRE, val);
3397
3398         /* CCR4
3399          *
3400          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3401          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3402          * 05      TST1 Test Pin, 0=normal operation
3403          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3404          * 03..02  Reserved, must be 0
3405          * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
3406          *
3407          * 0101 0000
3408          */
3409         val = 0x50;
3410         write_reg(info, CHA + CCR4, val);
3411         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3412                 mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3413         else
3414                 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3415
3416         /* RLCR Receive length check register
3417          *
3418          * 7     1=enable receive length check
3419          * 6..0  Max frame length = (RL + 1) * 32
3420          */
3421         write_reg(info, CHA + RLCR, 0);
3422
3423         /* XBCH Transmit Byte Count High
3424          *
3425          * 07      DMA mode, 0 = interrupt driven
3426          * 06      NRM, 0=ABM (ignored)
3427          * 05      CAS Carrier Auto Start
3428          * 04      XC Transmit Continuously (ignored)
3429          * 03..00  XBC[10..8] Transmit byte count bits 10..8
3430          *
3431          * 0000 0000
3432          */
3433         val = 0x00;
3434         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3435                 val |= BIT5;
3436         write_reg(info, CHA + XBCH, val);
3437         enable_auxclk(info);
3438         if (info->params.loopback || info->testing_irq)
3439                 loopback_enable(info);
3440         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3441         {
3442                 irq_enable(info, CHB, IRQ_CTS);
3443                 /* PVR[3] 1=AUTO CTS active */
3444                 set_reg_bits(info, CHA + PVR, BIT3);
3445         } else
3446                 clear_reg_bits(info, CHA + PVR, BIT3);
3447
3448         irq_enable(info, CHA,
3449                          IRQ_RXEOM + IRQ_RXFIFO + IRQ_ALLSENT +
3450                          IRQ_UNDERRUN + IRQ_TXFIFO);
3451         issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3452         wait_command_complete(info, CHA);
3453         read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3454
3455         /* Master clock mode enabled above to allow reset commands
3456          * to complete even if no data clocks are present.
3457          *
3458          * Disable master clock mode for normal communications because
3459          * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3460          * IRQ when in master clock mode.
3461          *
3462          * Leave master clock mode enabled for IRQ test because the
3463          * timer IRQ used by the test can only happen in master clock mode.
3464          */
3465         if (!info->testing_irq)
3466                 clear_reg_bits(info, CHA + CCR0, BIT6);
3467
3468         tx_set_idle(info);
3469
3470         tx_stop(info);
3471         rx_stop(info);
3472 }
3473
3474 static void rx_stop(MGSLPC_INFO *info)
3475 {
3476         if (debug_level >= DEBUG_LEVEL_ISR)
3477                 printk("%s(%d):rx_stop(%s)\n",
3478                          __FILE__,__LINE__, info->device_name );
3479
3480         /* MODE:03 RAC Receiver Active, 0=inactive */
3481         clear_reg_bits(info, CHA + MODE, BIT3);
3482
3483         info->rx_enabled = false;
3484         info->rx_overflow = false;
3485 }
3486
3487 static void rx_start(MGSLPC_INFO *info)
3488 {
3489         if (debug_level >= DEBUG_LEVEL_ISR)
3490                 printk("%s(%d):rx_start(%s)\n",
3491                          __FILE__,__LINE__, info->device_name );
3492
3493         rx_reset_buffers(info);
3494         info->rx_enabled = false;
3495         info->rx_overflow = false;
3496
3497         /* MODE:03 RAC Receiver Active, 1=active */
3498         set_reg_bits(info, CHA + MODE, BIT3);
3499
3500         info->rx_enabled = true;
3501 }
3502
3503 static void tx_start(MGSLPC_INFO *info)
3504 {
3505         if (debug_level >= DEBUG_LEVEL_ISR)
3506                 printk("%s(%d):tx_start(%s)\n",
3507                          __FILE__,__LINE__, info->device_name );
3508
3509         if (info->tx_count) {
3510                 /* If auto RTS enabled and RTS is inactive, then assert */
3511                 /* RTS and set a flag indicating that the driver should */
3512                 /* negate RTS when the transmission completes. */
3513                 info->drop_rts_on_tx_done = false;
3514
3515                 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3516                         get_signals(info);
3517                         if (!(info->serial_signals & SerialSignal_RTS)) {
3518                                 info->serial_signals |= SerialSignal_RTS;
3519                                 set_signals(info);
3520                                 info->drop_rts_on_tx_done = true;
3521                         }
3522                 }
3523
3524                 if (info->params.mode == MGSL_MODE_ASYNC) {
3525                         if (!info->tx_active) {
3526                                 info->tx_active = true;
3527                                 tx_ready(info);
3528                         }
3529                 } else {
3530                         info->tx_active = true;
3531                         tx_ready(info);
3532                         mod_timer(&info->tx_timer, jiffies +
3533                                         msecs_to_jiffies(5000));
3534                 }
3535         }
3536
3537         if (!info->tx_enabled)
3538                 info->tx_enabled = true;
3539 }
3540
3541 static void tx_stop(MGSLPC_INFO *info)
3542 {
3543         if (debug_level >= DEBUG_LEVEL_ISR)
3544                 printk("%s(%d):tx_stop(%s)\n",
3545                          __FILE__,__LINE__, info->device_name );
3546
3547         del_timer(&info->tx_timer);
3548
3549         info->tx_enabled = false;
3550         info->tx_active = false;
3551 }
3552
3553 /* Reset the adapter to a known state and prepare it for further use.
3554  */
3555 static void reset_device(MGSLPC_INFO *info)
3556 {
3557         /* power up both channels (set BIT7) */
3558         write_reg(info, CHA + CCR0, 0x80);
3559         write_reg(info, CHB + CCR0, 0x80);
3560         write_reg(info, CHA + MODE, 0);
3561         write_reg(info, CHB + MODE, 0);
3562
3563         /* disable all interrupts */
3564         irq_disable(info, CHA, 0xffff);
3565         irq_disable(info, CHB, 0xffff);
3566         port_irq_disable(info, 0xff);
3567
3568         /* PCR Port Configuration Register
3569          *
3570          * 07..04  DEC[3..0] Serial I/F select outputs
3571          * 03      output, 1=AUTO CTS control enabled
3572          * 02      RI Ring Indicator input 0=active
3573          * 01      DSR input 0=active
3574          * 00      DTR output 0=active
3575          *
3576          * 0000 0110
3577          */
3578         write_reg(info, PCR, 0x06);
3579
3580         /* PVR Port Value Register
3581          *
3582          * 07..04  DEC[3..0] Serial I/F select (0000=disabled)
3583          * 03      AUTO CTS output 1=enabled
3584          * 02      RI Ring Indicator input
3585          * 01      DSR input
3586          * 00      DTR output (1=inactive)
3587          *
3588          * 0000 0001
3589          */
3590 //      write_reg(info, PVR, PVR_DTR);
3591
3592         /* IPC Interrupt Port Configuration
3593          *
3594          * 07      VIS 1=Masked interrupts visible
3595          * 06..05  Reserved, 0
3596          * 04..03  SLA Slave address, 00 ignored
3597          * 02      CASM Cascading Mode, 1=daisy chain
3598          * 01..00  IC[1..0] Interrupt Config, 01=push-pull output, active low
3599          *
3600          * 0000 0101
3601          */
3602         write_reg(info, IPC, 0x05);
3603 }
3604
3605 static void async_mode(MGSLPC_INFO *info)
3606 {
3607         unsigned char val;
3608
3609         /* disable all interrupts */
3610         irq_disable(info, CHA, 0xffff);
3611         irq_disable(info, CHB, 0xffff);
3612         port_irq_disable(info, 0xff);
3613
3614         /* MODE
3615          *
3616          * 07      Reserved, 0
3617          * 06      FRTS RTS State, 0=active
3618          * 05      FCTS Flow Control on CTS
3619          * 04      FLON Flow Control Enable
3620          * 03      RAC Receiver Active, 0 = inactive
3621          * 02      RTS 0=Auto RTS, 1=manual RTS
3622          * 01      TRS Timer Resolution, 1=512
3623          * 00      TLP Test Loop, 0 = no loop
3624          *
3625          * 0000 0110
3626          */
3627         val = 0x06;
3628         if (info->params.loopback)
3629                 val |= BIT0;
3630
3631         /* preserve RTS state */
3632         if (!(info->serial_signals & SerialSignal_RTS))
3633                 val |= BIT6;
3634         write_reg(info, CHA + MODE, val);
3635
3636         /* CCR0
3637          *
3638          * 07      PU Power Up, 1=active, 0=power down
3639          * 06      MCE Master Clock Enable, 1=enabled
3640          * 05      Reserved, 0
3641          * 04..02  SC[2..0] Encoding, 000=NRZ
3642          * 01..00  SM[1..0] Serial Mode, 11=Async
3643          *
3644          * 1000 0011
3645          */
3646         write_reg(info, CHA + CCR0, 0x83);
3647
3648         /* CCR1
3649          *
3650          * 07..05  Reserved, 0
3651          * 04      ODS Output Driver Select, 1=TxD is push-pull output
3652          * 03      BCR Bit Clock Rate, 1=16x
3653          * 02..00  CM[2..0] Clock Mode, 111=BRG
3654          *
3655          * 0001 1111
3656          */
3657         write_reg(info, CHA + CCR1, 0x1f);
3658
3659         /* CCR2 (channel A)
3660          *
3661          * 07..06  BGR[9..8] Baud rate bits 9..8
3662          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3663          * 04      SSEL Clock source select, 1=submode b
3664          * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3665          * 02      RWX Read/Write Exchange 0=disabled
3666          * 01      Reserved, 0
3667          * 00      DIV, data inversion 0=disabled, 1=enabled
3668          *
3669          * 0001 0000
3670          */
3671         write_reg(info, CHA + CCR2, 0x10);
3672
3673         /* CCR3
3674          *
3675          * 07..01  Reserved, 0
3676          * 00      PSD DPLL Phase Shift Disable
3677          *
3678          * 0000 0000
3679          */
3680         write_reg(info, CHA + CCR3, 0);
3681
3682         /* CCR4
3683          *
3684          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3685          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3686          * 05      TST1 Test Pin, 0=normal operation
3687          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3688          * 03..00  Reserved, must be 0
3689          *
3690          * 0101 0000
3691          */
3692         write_reg(info, CHA + CCR4, 0x50);
3693         mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
3694
3695         /* DAFO Data Format
3696          *
3697          * 07      Reserved, 0
3698          * 06      XBRK transmit break, 0=normal operation
3699          * 05      Stop bits (0=1, 1=2)
3700          * 04..03  PAR[1..0] Parity (01=odd, 10=even)
3701          * 02      PAREN Parity Enable
3702          * 01..00  CHL[1..0] Character Length (00=8, 01=7)
3703          *
3704          */
3705         val = 0x00;
3706         if (info->params.data_bits != 8)
3707                 val |= BIT0;    /* 7 bits */
3708         if (info->params.stop_bits != 1)
3709                 val |= BIT5;
3710         if (info->params.parity != ASYNC_PARITY_NONE)
3711         {
3712                 val |= BIT2;    /* Parity enable */
3713                 if (info->params.parity == ASYNC_PARITY_ODD)
3714                         val |= BIT3;
3715                 else
3716                         val |= BIT4;
3717         }
3718         write_reg(info, CHA + DAFO, val);
3719
3720         /* RFC Rx FIFO Control
3721          *
3722          * 07      Reserved, 0
3723          * 06      DPS, 1=parity bit not stored in data byte
3724          * 05      DXS, 0=all data stored in FIFO (including XON/XOFF)
3725          * 04      RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3726          * 03..02  RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3727          * 01      Reserved, 0
3728          * 00      TCDE Terminate Char Detect Enable, 0=disabled
3729          *
3730          * 0101 1100
3731          */
3732         write_reg(info, CHA + RFC, 0x5c);
3733
3734         /* RLCR Receive length check register
3735          *
3736          * Max frame length = (RL + 1) * 32
3737          */
3738         write_reg(info, CHA + RLCR, 0);
3739
3740         /* XBCH Transmit Byte Count High
3741          *
3742          * 07      DMA mode, 0 = interrupt driven
3743          * 06      NRM, 0=ABM (ignored)
3744          * 05      CAS Carrier Auto Start
3745          * 04      XC Transmit Continuously (ignored)
3746          * 03..00  XBC[10..8] Transmit byte count bits 10..8
3747          *
3748          * 0000 0000
3749          */
3750         val = 0x00;
3751         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3752                 val |= BIT5;
3753         write_reg(info, CHA + XBCH, val);
3754         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3755                 irq_enable(info, CHA, IRQ_CTS);
3756
3757         /* MODE:03 RAC Receiver Active, 1=active */
3758         set_reg_bits(info, CHA + MODE, BIT3);
3759         enable_auxclk(info);
3760         if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3761                 irq_enable(info, CHB, IRQ_CTS);
3762                 /* PVR[3] 1=AUTO CTS active */
3763                 set_reg_bits(info, CHA + PVR, BIT3);
3764         } else
3765                 clear_reg_bits(info, CHA + PVR, BIT3);
3766         irq_enable(info, CHA,
3767                           IRQ_RXEOM + IRQ_RXFIFO + IRQ_BREAK_ON + IRQ_RXTIME +
3768                           IRQ_ALLSENT + IRQ_TXFIFO);
3769         issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3770         wait_command_complete(info, CHA);
3771         read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3772 }
3773
3774 /* Set the HDLC idle mode for the transmitter.
3775  */
3776 static void tx_set_idle(MGSLPC_INFO *info)
3777 {
3778         /* Note: ESCC2 only supports flags and one idle modes */
3779         if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3780                 set_reg_bits(info, CHA + CCR1, BIT3);
3781         else
3782                 clear_reg_bits(info, CHA + CCR1, BIT3);
3783 }
3784
3785 /* get state of the V24 status (input) signals.
3786  */
3787 static void get_signals(MGSLPC_INFO *info)
3788 {
3789         unsigned char status = 0;
3790
3791         /* preserve DTR and RTS */
3792         info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
3793
3794         if (read_reg(info, CHB + VSTR) & BIT7)
3795                 info->serial_signals |= SerialSignal_DCD;
3796         if (read_reg(info, CHB + STAR) & BIT1)
3797                 info->serial_signals |= SerialSignal_CTS;
3798
3799         status = read_reg(info, CHA + PVR);
3800         if (!(status & PVR_RI))
3801                 info->serial_signals |= SerialSignal_RI;
3802         if (!(status & PVR_DSR))
3803                 info->serial_signals |= SerialSignal_DSR;
3804 }
3805
3806 /* Set the state of DTR and RTS based on contents of
3807  * serial_signals member of device extension.
3808  */
3809 static void set_signals(MGSLPC_INFO *info)
3810 {
3811         unsigned char val;
3812
3813         val = read_reg(info, CHA + MODE);
3814         if (info->params.mode == MGSL_MODE_ASYNC) {
3815                 if (info->serial_signals & SerialSignal_RTS)
3816                         val &= ~BIT6;
3817                 else
3818                         val |= BIT6;
3819         } else {
3820                 if (info->serial_signals & SerialSignal_RTS)
3821                         val |= BIT2;
3822                 else
3823                         val &= ~BIT2;
3824         }
3825         write_reg(info, CHA + MODE, val);
3826
3827         if (info->serial_signals & SerialSignal_DTR)
3828                 clear_reg_bits(info, CHA + PVR, PVR_DTR);
3829         else
3830                 set_reg_bits(info, CHA + PVR, PVR_DTR);
3831 }
3832
3833 static void rx_reset_buffers(MGSLPC_INFO *info)
3834 {
3835         RXBUF *buf;
3836         int i;
3837
3838         info->rx_put = 0;
3839         info->rx_get = 0;
3840         info->rx_frame_count = 0;
3841         for (i=0 ; i < info->rx_buf_count ; i++) {
3842                 buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3843                 buf->status = buf->count = 0;
3844         }
3845 }
3846
3847 /* Attempt to return a received HDLC frame
3848  * Only frames received without errors are returned.
3849  *
3850  * Returns true if frame returned, otherwise false
3851  */
3852 static bool rx_get_frame(MGSLPC_INFO *info)
3853 {
3854         unsigned short status;
3855         RXBUF *buf;
3856         unsigned int framesize = 0;
3857         unsigned long flags;
3858         struct tty_struct *tty = info->tty;
3859         bool return_frame = false;
3860
3861         if (info->rx_frame_count == 0)
3862                 return false;
3863
3864         buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3865
3866         status = buf->status;
3867
3868         /* 07  VFR  1=valid frame
3869          * 06  RDO  1=data overrun
3870          * 05  CRC  1=OK, 0=error
3871          * 04  RAB  1=frame aborted
3872          */
3873         if ((status & 0xf0) != 0xA0) {
3874                 if (!(status & BIT7) || (status & BIT4))
3875                         info->icount.rxabort++;
3876                 else if (status & BIT6)
3877                         info->icount.rxover++;
3878                 else if (!(status & BIT5)) {
3879                         info->icount.rxcrc++;
3880                         if (info->params.crc_type & HDLC_CRC_RETURN_EX)
3881                                 return_frame = true;
3882                 }
3883                 framesize = 0;
3884 #if SYNCLINK_GENERIC_HDLC
3885                 {
3886                         info->netdev->stats.rx_errors++;
3887                         info->netdev->stats.rx_frame_errors++;
3888                 }
3889 #endif
3890         } else
3891                 return_frame = true;
3892
3893         if (return_frame)
3894                 framesize = buf->count;
3895
3896         if (debug_level >= DEBUG_LEVEL_BH)
3897                 printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3898                         __FILE__,__LINE__,info->device_name,status,framesize);
3899
3900         if (debug_level >= DEBUG_LEVEL_DATA)
3901                 trace_block(info, buf->data, framesize, 0);
3902
3903         if (framesize) {
3904                 if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3905                       framesize+1 > info->max_frame_size) ||
3906                     framesize > info->max_frame_size)
3907                         info->icount.rxlong++;
3908                 else {
3909                         if (status & BIT5)
3910                                 info->icount.rxok++;
3911
3912                         if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3913                                 *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3914                                 ++framesize;
3915                         }
3916
3917 #if SYNCLINK_GENERIC_HDLC
3918                         if (info->netcount)
3919                                 hdlcdev_rx(info, buf->data, framesize);
3920                         else
3921 #endif
3922                                 ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3923                 }
3924         }
3925
3926         spin_lock_irqsave(&info->lock,flags);
3927         buf->status = buf->count = 0;
3928         info->rx_frame_count--;
3929         info->rx_get++;
3930         if (info->rx_get >= info->rx_buf_count)
3931                 info->rx_get = 0;
3932         spin_unlock_irqrestore(&info->lock,flags);
3933
3934         return true;
3935 }
3936
3937 static bool register_test(MGSLPC_INFO *info)
3938 {
3939         static unsigned char patterns[] =
3940             { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
3941         static unsigned int count = ARRAY_SIZE(patterns);
3942         unsigned int i;
3943         bool rc = true;
3944         unsigned long flags;
3945
3946         spin_lock_irqsave(&info->lock,flags);
3947         reset_device(info);
3948
3949         for (i = 0; i < count; i++) {
3950                 write_reg(info, XAD1, patterns[i]);
3951                 write_reg(info, XAD2, patterns[(i + 1) % count]);
3952                 if ((read_reg(info, XAD1) != patterns[i]) ||
3953                     (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
3954                         rc = false;
3955                         break;
3956                 }
3957         }
3958
3959         spin_unlock_irqrestore(&info->lock,flags);
3960         return rc;
3961 }
3962
3963 static bool irq_test(MGSLPC_INFO *info)
3964 {
3965         unsigned long end_time;
3966         unsigned long flags;
3967
3968         spin_lock_irqsave(&info->lock,flags);
3969         reset_device(info);
3970
3971         info->testing_irq = true;
3972         hdlc_mode(info);
3973
3974         info->irq_occurred = false;
3975
3976         /* init hdlc mode */
3977
3978         irq_enable(info, CHA, IRQ_TIMER);
3979         write_reg(info, CHA + TIMR, 0); /* 512 cycles */
3980         issue_command(info, CHA, CMD_START_TIMER);
3981
3982         spin_unlock_irqrestore(&info->lock,flags);
3983
3984         end_time=100;
3985         while(end_time-- && !info->irq_occurred) {
3986                 msleep_interruptible(10);
3987         }
3988
3989         info->testing_irq = false;
3990
3991         spin_lock_irqsave(&info->lock,flags);
3992         reset_device(info);
3993         spin_unlock_irqrestore(&info->lock,flags);
3994
3995         return info->irq_occurred;
3996 }
3997
3998 static int adapter_test(MGSLPC_INFO *info)
3999 {
4000         if (!register_test(info)) {
4001                 info->init_error = DiagStatus_AddressFailure;
4002                 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
4003                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
4004                 return -ENODEV;
4005         }
4006
4007         if (!irq_test(info)) {
4008                 info->init_error = DiagStatus_IrqFailure;
4009                 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
4010                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
4011                 return -ENODEV;
4012         }
4013
4014         if (debug_level >= DEBUG_LEVEL_INFO)
4015                 printk("%s(%d):device %s passed diagnostics\n",
4016                         __FILE__,__LINE__,info->device_name);
4017         return 0;
4018 }
4019
4020 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
4021 {
4022         int i;
4023         int linecount;
4024         if (xmit)
4025                 printk("%s tx data:\n",info->device_name);
4026         else
4027                 printk("%s rx data:\n",info->device_name);
4028
4029         while(count) {
4030                 if (count > 16)
4031                         linecount = 16;
4032                 else
4033                         linecount = count;
4034
4035                 for(i=0;i<linecount;i++)
4036                         printk("%02X ",(unsigned char)data[i]);
4037                 for(;i<17;i++)
4038                         printk("   ");
4039                 for(i=0;i<linecount;i++) {
4040                         if (data[i]>=040 && data[i]<=0176)
4041                                 printk("%c",data[i]);
4042                         else
4043                                 printk(".");
4044                 }
4045                 printk("\n");
4046
4047                 data  += linecount;
4048                 count -= linecount;
4049         }
4050 }
4051
4052 /* HDLC frame time out
4053  * update stats and do tx completion processing
4054  */
4055 static void tx_timeout(unsigned long context)
4056 {
4057         MGSLPC_INFO *info = (MGSLPC_INFO*)context;
4058         unsigned long flags;
4059
4060         if ( debug_level >= DEBUG_LEVEL_INFO )
4061                 printk( "%s(%d):tx_timeout(%s)\n",
4062                         __FILE__,__LINE__,info->device_name);
4063         if(info->tx_active &&
4064            info->params.mode == MGSL_MODE_HDLC) {
4065                 info->icount.txtimeout++;
4066         }
4067         spin_lock_irqsave(&info->lock,flags);
4068         info->tx_active = false;
4069         info->tx_count = info->tx_put = info->tx_get = 0;
4070
4071         spin_unlock_irqrestore(&info->lock,flags);
4072
4073 #if SYNCLINK_GENERIC_HDLC
4074         if (info->netcount)
4075                 hdlcdev_tx_done(info);
4076         else
4077 #endif
4078                 bh_transmit(info);
4079 }
4080
4081 #if SYNCLINK_GENERIC_HDLC
4082
4083 /**
4084  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
4085  * set encoding and frame check sequence (FCS) options
4086  *
4087  * dev       pointer to network device structure
4088  * encoding  serial encoding setting
4089  * parity    FCS setting
4090  *
4091  * returns 0 if success, otherwise error code
4092  */
4093 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
4094                           unsigned short parity)
4095 {
4096         MGSLPC_INFO *info = dev_to_port(dev);
4097         unsigned char  new_encoding;
4098         unsigned short new_crctype;
4099
4100         /* return error if TTY interface open */
4101         if (info->count)
4102                 return -EBUSY;
4103
4104         switch (encoding)
4105         {
4106         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
4107         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
4108         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
4109         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
4110         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
4111         default: return -EINVAL;
4112         }
4113
4114         switch (parity)
4115         {
4116         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
4117         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
4118         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
4119         default: return -EINVAL;
4120         }
4121
4122         info->params.encoding = new_encoding;
4123         info->params.crc_type = new_crctype;
4124
4125         /* if network interface up, reprogram hardware */
4126         if (info->netcount)
4127                 mgslpc_program_hw(info);
4128
4129         return 0;
4130 }
4131
4132 /**
4133  * called by generic HDLC layer to send frame
4134  *
4135  * skb  socket buffer containing HDLC frame
4136  * dev  pointer to network device structure
4137  *
4138  * returns 0 if success, otherwise error code
4139  */
4140 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
4141 {
4142         MGSLPC_INFO *info = dev_to_port(dev);
4143         unsigned long flags;
4144
4145         if (debug_level >= DEBUG_LEVEL_INFO)
4146                 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
4147
4148         /* stop sending until this frame completes */
4149         netif_stop_queue(dev);
4150
4151         /* copy data to device buffers */
4152         skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
4153         info->tx_get = 0;
4154         info->tx_put = info->tx_count = skb->len;
4155
4156         /* update network statistics */
4157         dev->stats.tx_packets++;
4158         dev->stats.tx_bytes += skb->len;
4159
4160         /* done with socket buffer, so free it */
4161         dev_kfree_skb(skb);
4162
4163         /* save start time for transmit timeout detection */
4164         dev->trans_start = jiffies;
4165
4166         /* start hardware transmitter if necessary */
4167         spin_lock_irqsave(&info->lock,flags);
4168         if (!info->tx_active)
4169                 tx_start(info);
4170         spin_unlock_irqrestore(&info->lock,flags);
4171
4172         return 0;
4173 }
4174
4175 /**
4176  * called by network layer when interface enabled
4177  * claim resources and initialize hardware
4178  *
4179  * dev  pointer to network device structure
4180  *
4181  * returns 0 if success, otherwise error code
4182  */
4183 static int hdlcdev_open(struct net_device *dev)
4184 {
4185         MGSLPC_INFO *info = dev_to_port(dev);
4186         int rc;
4187         unsigned long flags;
4188
4189         if (debug_level >= DEBUG_LEVEL_INFO)
4190                 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
4191
4192         /* generic HDLC layer open processing */
4193         if ((rc = hdlc_open(dev)))
4194                 return rc;
4195
4196         /* arbitrate between network and tty opens */
4197         spin_lock_irqsave(&info->netlock, flags);
4198         if (info->count != 0 || info->netcount != 0) {
4199                 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
4200                 spin_unlock_irqrestore(&info->netlock, flags);
4201                 return -EBUSY;
4202         }
4203         info->netcount=1;
4204         spin_unlock_irqrestore(&info->netlock, flags);
4205
4206         /* claim resources and init adapter */
4207         if ((rc = startup(info)) != 0) {
4208                 spin_lock_irqsave(&info->netlock, flags);
4209                 info->netcount=0;
4210                 spin_unlock_irqrestore(&info->netlock, flags);
4211                 return rc;
4212         }
4213
4214         /* assert DTR and RTS, apply hardware settings */
4215         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
4216         mgslpc_program_hw(info);
4217
4218         /* enable network layer transmit */
4219         dev->trans_start = jiffies;
4220         netif_start_queue(dev);
4221
4222         /* inform generic HDLC layer of current DCD status */
4223         spin_lock_irqsave(&info->lock, flags);
4224         get_signals(info);
4225         spin_unlock_irqrestore(&info->lock, flags);
4226         if (info->serial_signals & SerialSignal_DCD)
4227                 netif_carrier_on(dev);
4228         else
4229                 netif_carrier_off(dev);
4230         return 0;
4231 }
4232
4233 /**
4234  * called by network layer when interface is disabled
4235  * shutdown hardware and release resources
4236  *
4237  * dev  pointer to network device structure
4238  *
4239  * returns 0 if success, otherwise error code
4240  */
4241 static int hdlcdev_close(struct net_device *dev)
4242 {
4243         MGSLPC_INFO *info = dev_to_port(dev);
4244         unsigned long flags;
4245
4246         if (debug_level >= DEBUG_LEVEL_INFO)
4247                 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
4248
4249         netif_stop_queue(dev);
4250
4251         /* shutdown adapter and release resources */
4252         shutdown(info);
4253
4254         hdlc_close(dev);
4255
4256         spin_lock_irqsave(&info->netlock, flags);
4257         info->netcount=0;
4258         spin_unlock_irqrestore(&info->netlock, flags);
4259
4260         return 0;
4261 }
4262
4263 /**
4264  * called by network layer to process IOCTL call to network device
4265  *
4266  * dev  pointer to network device structure
4267  * ifr  pointer to network interface request structure
4268  * cmd  IOCTL command code
4269  *
4270  * returns 0 if success, otherwise error code
4271  */
4272 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4273 {
4274         const size_t size = sizeof(sync_serial_settings);
4275         sync_serial_settings new_line;
4276         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4277         MGSLPC_INFO *info = dev_to_port(dev);
4278         unsigned int flags;
4279
4280         if (debug_level >= DEBUG_LEVEL_INFO)
4281                 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
4282
4283         /* return error if TTY interface open */
4284         if (info->count)
4285                 return -EBUSY;
4286
4287         if (cmd != SIOCWANDEV)
4288                 return hdlc_ioctl(dev, ifr, cmd);
4289
4290         switch(ifr->ifr_settings.type) {
4291         case IF_GET_IFACE: /* return current sync_serial_settings */
4292
4293                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4294                 if (ifr->ifr_settings.size < size) {
4295                         ifr->ifr_settings.size = size; /* data size wanted */
4296                         return -ENOBUFS;
4297                 }
4298
4299                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4300                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4301                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4302                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4303
4304                 switch (flags){
4305                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4306                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
4307                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
4308                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4309                 default: new_line.clock_type = CLOCK_DEFAULT;
4310                 }
4311
4312                 new_line.clock_rate = info->params.clock_speed;
4313                 new_line.loopback   = info->params.loopback ? 1:0;
4314
4315                 if (copy_to_user(line, &new_line, size))
4316                         return -EFAULT;
4317                 return 0;
4318
4319         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4320
4321                 if(!capable(CAP_NET_ADMIN))
4322                         return -EPERM;
4323                 if (copy_from_user(&new_line, line, size))
4324                         return -EFAULT;
4325
4326                 switch (new_line.clock_type)
4327                 {
4328                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4329                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4330                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
4331                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
4332                 case CLOCK_DEFAULT:  flags = info->params.flags &
4333                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4334                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4335                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4336                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
4337                 default: return -EINVAL;
4338                 }
4339
4340                 if (new_line.loopback != 0 && new_line.loopback != 1)
4341                         return -EINVAL;
4342
4343                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4344                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4345                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4346                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4347                 info->params.flags |= flags;
4348
4349                 info->params.loopback = new_line.loopback;
4350
4351                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4352                         info->params.clock_speed = new_line.clock_rate;
4353                 else
4354                         info->params.clock_speed = 0;
4355
4356                 /* if network interface up, reprogram hardware */
4357                 if (info->netcount)
4358                         mgslpc_program_hw(info);
4359                 return 0;
4360
4361         default:
4362                 return hdlc_ioctl(dev, ifr, cmd);
4363         }
4364 }
4365
4366 /**
4367  * called by network layer when transmit timeout is detected
4368  *
4369  * dev  pointer to network device structure
4370  */
4371 static void hdlcdev_tx_timeout(struct net_device *dev)
4372 {
4373         MGSLPC_INFO *info = dev_to_port(dev);
4374         unsigned long flags;
4375
4376         if (debug_level >= DEBUG_LEVEL_INFO)
4377                 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
4378
4379         dev->stats.tx_errors++;
4380         dev->stats.tx_aborted_errors++;
4381
4382         spin_lock_irqsave(&info->lock,flags);
4383         tx_stop(info);
4384         spin_unlock_irqrestore(&info->lock,flags);
4385
4386         netif_wake_queue(dev);
4387 }
4388
4389 /**
4390  * called by device driver when transmit completes
4391  * reenable network layer transmit if stopped
4392  *
4393  * info  pointer to device instance information
4394  */
4395 static void hdlcdev_tx_done(MGSLPC_INFO *info)
4396 {
4397         if (netif_queue_stopped(info->netdev))
4398                 netif_wake_queue(info->netdev);
4399 }
4400
4401 /**
4402  * called by device driver when frame received
4403  * pass frame to network layer
4404  *
4405  * info  pointer to device instance information
4406  * buf   pointer to buffer contianing frame data
4407  * size  count of data bytes in buf
4408  */
4409 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4410 {
4411         struct sk_buff *skb = dev_alloc_skb(size);
4412         struct net_device *dev = info->netdev;
4413
4414         if (debug_level >= DEBUG_LEVEL_INFO)
4415                 printk("hdlcdev_rx(%s)\n",dev->name);
4416
4417         if (skb == NULL) {
4418                 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
4419                 dev->stats.rx_dropped++;
4420                 return;
4421         }
4422
4423         memcpy(skb_put(skb, size), buf, size);
4424
4425         skb->protocol = hdlc_type_trans(skb, dev);
4426
4427         dev->stats.rx_packets++;
4428         dev->stats.rx_bytes += size;
4429
4430         netif_rx(skb);
4431
4432         dev->last_rx = jiffies;
4433 }
4434
4435 /**
4436  * called by device driver when adding device instance
4437  * do generic HDLC initialization
4438  *
4439  * info  pointer to device instance information
4440  *
4441  * returns 0 if success, otherwise error code
4442  */
4443 static int hdlcdev_init(MGSLPC_INFO *info)
4444 {
4445         int rc;
4446         struct net_device *dev;
4447         hdlc_device *hdlc;
4448
4449         /* allocate and initialize network and HDLC layer objects */
4450
4451         if (!(dev = alloc_hdlcdev(info))) {
4452                 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
4453                 return -ENOMEM;
4454         }
4455
4456         /* for network layer reporting purposes only */
4457         dev->base_addr = info->io_base;
4458         dev->irq       = info->irq_level;
4459
4460         /* network layer callbacks and settings */
4461         dev->do_ioctl       = hdlcdev_ioctl;
4462         dev->open           = hdlcdev_open;
4463         dev->stop           = hdlcdev_close;
4464         dev->tx_timeout     = hdlcdev_tx_timeout;
4465         dev->watchdog_timeo = 10*HZ;
4466         dev->tx_queue_len   = 50;
4467
4468         /* generic HDLC layer callbacks and settings */
4469         hdlc         = dev_to_hdlc(dev);
4470         hdlc->attach = hdlcdev_attach;
4471         hdlc->xmit   = hdlcdev_xmit;
4472
4473         /* register objects with HDLC layer */
4474         if ((rc = register_hdlc_device(dev))) {
4475                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
4476                 free_netdev(dev);
4477                 return rc;
4478         }
4479
4480         info->netdev = dev;
4481         return 0;
4482 }
4483
4484 /**
4485  * called by device driver when removing device instance
4486  * do generic HDLC cleanup
4487  *
4488  * info  pointer to device instance information
4489  */
4490 static void hdlcdev_exit(MGSLPC_INFO *info)
4491 {
4492         unregister_hdlc_device(info->netdev);
4493         free_netdev(info->netdev);
4494         info->netdev = NULL;
4495 }
4496
4497 #endif /* CONFIG_HDLC */
4498