[PATCH] Kill various deprecated/unused block layer defines/functions
[linux-2.6.git] / drivers / block / cciss.c
1 /*
2  *    Disk Array driver for HP SA 5xxx and 6xxx Controllers
3  *    Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
4  *
5  *    This program is free software; you can redistribute it and/or modify
6  *    it under the terms of the GNU General Public License as published by
7  *    the Free Software Foundation; either version 2 of the License, or
8  *    (at your option) any later version.
9  *
10  *    This program is distributed in the hope that it will be useful,
11  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
12  *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13  *    NON INFRINGEMENT.  See the GNU General Public License for more details.
14  *
15  *    You should have received a copy of the GNU General Public License
16  *    along with this program; if not, write to the Free Software
17  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18  *
19  *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
20  *
21  */
22
23 #include <linux/config.h>       /* CONFIG_PROC_FS */
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/types.h>
27 #include <linux/pci.h>
28 #include <linux/kernel.h>
29 #include <linux/slab.h>
30 #include <linux/delay.h>
31 #include <linux/major.h>
32 #include <linux/fs.h>
33 #include <linux/bio.h>
34 #include <linux/blkpg.h>
35 #include <linux/timer.h>
36 #include <linux/proc_fs.h>
37 #include <linux/init.h>
38 #include <linux/hdreg.h>
39 #include <linux/spinlock.h>
40 #include <linux/compat.h>
41 #include <linux/blktrace_api.h>
42 #include <asm/uaccess.h>
43 #include <asm/io.h>
44
45 #include <linux/dma-mapping.h>
46 #include <linux/blkdev.h>
47 #include <linux/genhd.h>
48 #include <linux/completion.h>
49
50 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
51 #define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
52 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
53
54 /* Embedded module documentation macros - see modules.h */
55 MODULE_AUTHOR("Hewlett-Packard Company");
56 MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
57 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
58                         " SA6i P600 P800 P400 P400i E200 E200i E500");
59 MODULE_LICENSE("GPL");
60
61 #include "cciss_cmd.h"
62 #include "cciss.h"
63 #include <linux/cciss_ioctl.h>
64
65 /* define the PCI info for the cards we can control */
66 static const struct pci_device_id cciss_pci_device_id[] = {
67         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,  0x0E11, 0x4070},
68         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080},
69         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082},
70         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083},
71         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091},
72         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A},
73         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B},
74         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C},
75         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D},
76         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSA,     0x103C, 0x3225},
77         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3223},
78         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3234},
79         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3235},
80         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3211},
81         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3212},
82         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
83         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
84         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
85         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3233},
86         {0,}
87 };
88
89 MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
90
91 /*  board_id = Subsystem Device ID & Vendor ID
92  *  product = Marketing Name for the board
93  *  access = Address of the struct of function pointers
94  */
95 static struct board_type products[] = {
96         {0x40700E11, "Smart Array 5300", &SA5_access},
97         {0x40800E11, "Smart Array 5i", &SA5B_access},
98         {0x40820E11, "Smart Array 532", &SA5B_access},
99         {0x40830E11, "Smart Array 5312", &SA5B_access},
100         {0x409A0E11, "Smart Array 641", &SA5_access},
101         {0x409B0E11, "Smart Array 642", &SA5_access},
102         {0x409C0E11, "Smart Array 6400", &SA5_access},
103         {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
104         {0x40910E11, "Smart Array 6i", &SA5_access},
105         {0x3225103C, "Smart Array P600", &SA5_access},
106         {0x3223103C, "Smart Array P800", &SA5_access},
107         {0x3234103C, "Smart Array P400", &SA5_access},
108         {0x3235103C, "Smart Array P400i", &SA5_access},
109         {0x3211103C, "Smart Array E200i", &SA5_access},
110         {0x3212103C, "Smart Array E200", &SA5_access},
111         {0x3213103C, "Smart Array E200i", &SA5_access},
112         {0x3214103C, "Smart Array E200i", &SA5_access},
113         {0x3215103C, "Smart Array E200i", &SA5_access},
114         {0x3233103C, "Smart Array E500", &SA5_access},
115 };
116
117 /* How long to wait (in milliseconds) for board to go into simple mode */
118 #define MAX_CONFIG_WAIT 30000
119 #define MAX_IOCTL_CONFIG_WAIT 1000
120
121 /*define how many times we will try a command because of bus resets */
122 #define MAX_CMD_RETRIES 3
123
124 #define READ_AHEAD       1024
125 #define NR_CMDS          384    /* #commands that can be outstanding */
126 #define MAX_CTLR        32
127
128 /* Originally cciss driver only supports 8 major numbers */
129 #define MAX_CTLR_ORIG   8
130
131 static ctlr_info_t *hba[MAX_CTLR];
132
133 static void do_cciss_request(request_queue_t *q);
134 static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
135 static int cciss_open(struct inode *inode, struct file *filep);
136 static int cciss_release(struct inode *inode, struct file *filep);
137 static int cciss_ioctl(struct inode *inode, struct file *filep,
138                        unsigned int cmd, unsigned long arg);
139 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
140
141 static int revalidate_allvol(ctlr_info_t *host);
142 static int cciss_revalidate(struct gendisk *disk);
143 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
144 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
145                            int clear_all);
146
147 static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
148                                 int withirq, unsigned int *total_size,
149                                 unsigned int *block_size);
150 static void cciss_geometry_inquiry(int ctlr, int logvol, int withirq,
151                                    unsigned int total_size,
152                                    unsigned int block_size,
153                                    InquiryData_struct *inq_buff,
154                                    drive_info_struct *drv);
155 static void cciss_getgeometry(int cntl_num);
156 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
157                                            __u32);
158 static void start_io(ctlr_info_t *h);
159 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
160                    unsigned int use_unit_num, unsigned int log_unit,
161                    __u8 page_code, unsigned char *scsi3addr, int cmd_type);
162 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
163                            unsigned int use_unit_num, unsigned int log_unit,
164                            __u8 page_code, int cmd_type);
165
166 static void fail_all_cmds(unsigned long ctlr);
167
168 #ifdef CONFIG_PROC_FS
169 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
170                                int length, int *eof, void *data);
171 static void cciss_procinit(int i);
172 #else
173 static void cciss_procinit(int i)
174 {
175 }
176 #endif                          /* CONFIG_PROC_FS */
177
178 #ifdef CONFIG_COMPAT
179 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
180 #endif
181
182 static struct block_device_operations cciss_fops = {
183         .owner = THIS_MODULE,
184         .open = cciss_open,
185         .release = cciss_release,
186         .ioctl = cciss_ioctl,
187         .getgeo = cciss_getgeo,
188 #ifdef CONFIG_COMPAT
189         .compat_ioctl = cciss_compat_ioctl,
190 #endif
191         .revalidate_disk = cciss_revalidate,
192 };
193
194 /*
195  * Enqueuing and dequeuing functions for cmdlists.
196  */
197 static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
198 {
199         if (*Qptr == NULL) {
200                 *Qptr = c;
201                 c->next = c->prev = c;
202         } else {
203                 c->prev = (*Qptr)->prev;
204                 c->next = (*Qptr);
205                 (*Qptr)->prev->next = c;
206                 (*Qptr)->prev = c;
207         }
208 }
209
210 static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
211                                           CommandList_struct *c)
212 {
213         if (c && c->next != c) {
214                 if (*Qptr == c)
215                         *Qptr = c->next;
216                 c->prev->next = c->next;
217                 c->next->prev = c->prev;
218         } else {
219                 *Qptr = NULL;
220         }
221         return c;
222 }
223
224 #include "cciss_scsi.c"         /* For SCSI tape support */
225
226 #ifdef CONFIG_PROC_FS
227
228 /*
229  * Report information about this controller.
230  */
231 #define ENG_GIG 1000000000
232 #define ENG_GIG_FACTOR (ENG_GIG/512)
233 #define RAID_UNKNOWN 6
234 static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
235         "UNKNOWN"
236 };
237
238 static struct proc_dir_entry *proc_cciss;
239
240 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
241                                int length, int *eof, void *data)
242 {
243         off_t pos = 0;
244         off_t len = 0;
245         int size, i, ctlr;
246         ctlr_info_t *h = (ctlr_info_t *) data;
247         drive_info_struct *drv;
248         unsigned long flags;
249         sector_t vol_sz, vol_sz_frac;
250
251         ctlr = h->ctlr;
252
253         /* prevent displaying bogus info during configuration
254          * or deconfiguration of a logical volume
255          */
256         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
257         if (h->busy_configuring) {
258                 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
259                 return -EBUSY;
260         }
261         h->busy_configuring = 1;
262         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
263
264         size = sprintf(buffer, "%s: HP %s Controller\n"
265                        "Board ID: 0x%08lx\n"
266                        "Firmware Version: %c%c%c%c\n"
267                        "IRQ: %d\n"
268                        "Logical drives: %d\n"
269                        "Current Q depth: %d\n"
270                        "Current # commands on controller: %d\n"
271                        "Max Q depth since init: %d\n"
272                        "Max # commands on controller since init: %d\n"
273                        "Max SG entries since init: %d\n\n",
274                        h->devname,
275                        h->product_name,
276                        (unsigned long)h->board_id,
277                        h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
278                        h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
279                        h->num_luns, h->Qdepth, h->commands_outstanding,
280                        h->maxQsinceinit, h->max_outstanding, h->maxSG);
281
282         pos += size;
283         len += size;
284         cciss_proc_tape_report(ctlr, buffer, &pos, &len);
285         for (i = 0; i <= h->highest_lun; i++) {
286
287                 drv = &h->drv[i];
288                 if (drv->heads == 0)
289                         continue;
290
291                 vol_sz = drv->nr_blocks;
292                 vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
293                 vol_sz_frac *= 100;
294                 sector_div(vol_sz_frac, ENG_GIG_FACTOR);
295
296                 if (drv->raid_level > 5)
297                         drv->raid_level = RAID_UNKNOWN;
298                 size = sprintf(buffer + len, "cciss/c%dd%d:"
299                                "\t%4u.%02uGB\tRAID %s\n",
300                                ctlr, i, (int)vol_sz, (int)vol_sz_frac,
301                                raid_label[drv->raid_level]);
302                 pos += size;
303                 len += size;
304         }
305
306         *eof = 1;
307         *start = buffer + offset;
308         len -= offset;
309         if (len > length)
310                 len = length;
311         h->busy_configuring = 0;
312         return len;
313 }
314
315 static int
316 cciss_proc_write(struct file *file, const char __user *buffer,
317                  unsigned long count, void *data)
318 {
319         unsigned char cmd[80];
320         int len;
321 #ifdef CONFIG_CISS_SCSI_TAPE
322         ctlr_info_t *h = (ctlr_info_t *) data;
323         int rc;
324 #endif
325
326         if (count > sizeof(cmd) - 1)
327                 return -EINVAL;
328         if (copy_from_user(cmd, buffer, count))
329                 return -EFAULT;
330         cmd[count] = '\0';
331         len = strlen(cmd);      // above 3 lines ensure safety
332         if (len && cmd[len - 1] == '\n')
333                 cmd[--len] = '\0';
334 #       ifdef CONFIG_CISS_SCSI_TAPE
335         if (strcmp("engage scsi", cmd) == 0) {
336                 rc = cciss_engage_scsi(h->ctlr);
337                 if (rc != 0)
338                         return -rc;
339                 return count;
340         }
341         /* might be nice to have "disengage" too, but it's not
342            safely possible. (only 1 module use count, lock issues.) */
343 #       endif
344         return -EINVAL;
345 }
346
347 /*
348  * Get us a file in /proc/cciss that says something about each controller.
349  * Create /proc/cciss if it doesn't exist yet.
350  */
351 static void __devinit cciss_procinit(int i)
352 {
353         struct proc_dir_entry *pde;
354
355         if (proc_cciss == NULL) {
356                 proc_cciss = proc_mkdir("cciss", proc_root_driver);
357                 if (!proc_cciss)
358                         return;
359         }
360
361         pde = create_proc_read_entry(hba[i]->devname,
362                                      S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
363                                      proc_cciss, cciss_proc_get_info, hba[i]);
364         pde->write_proc = cciss_proc_write;
365 }
366 #endif                          /* CONFIG_PROC_FS */
367
368 /*
369  * For operations that cannot sleep, a command block is allocated at init,
370  * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
371  * which ones are free or in use.  For operations that can wait for kmalloc
372  * to possible sleep, this routine can be called with get_from_pool set to 0.
373  * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
374  */
375 static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
376 {
377         CommandList_struct *c;
378         int i;
379         u64bit temp64;
380         dma_addr_t cmd_dma_handle, err_dma_handle;
381
382         if (!get_from_pool) {
383                 c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
384                         sizeof(CommandList_struct), &cmd_dma_handle);
385                 if (c == NULL)
386                         return NULL;
387                 memset(c, 0, sizeof(CommandList_struct));
388
389                 c->cmdindex = -1;
390
391                 c->err_info = (ErrorInfo_struct *)
392                     pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
393                             &err_dma_handle);
394
395                 if (c->err_info == NULL) {
396                         pci_free_consistent(h->pdev,
397                                 sizeof(CommandList_struct), c, cmd_dma_handle);
398                         return NULL;
399                 }
400                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
401         } else {                /* get it out of the controllers pool */
402
403                 do {
404                         i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
405                         if (i == NR_CMDS)
406                                 return NULL;
407                 } while (test_and_set_bit
408                          (i & (BITS_PER_LONG - 1),
409                           h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
410 #ifdef CCISS_DEBUG
411                 printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
412 #endif
413                 c = h->cmd_pool + i;
414                 memset(c, 0, sizeof(CommandList_struct));
415                 cmd_dma_handle = h->cmd_pool_dhandle
416                     + i * sizeof(CommandList_struct);
417                 c->err_info = h->errinfo_pool + i;
418                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
419                 err_dma_handle = h->errinfo_pool_dhandle
420                     + i * sizeof(ErrorInfo_struct);
421                 h->nr_allocs++;
422
423                 c->cmdindex = i;
424         }
425
426         c->busaddr = (__u32) cmd_dma_handle;
427         temp64.val = (__u64) err_dma_handle;
428         c->ErrDesc.Addr.lower = temp64.val32.lower;
429         c->ErrDesc.Addr.upper = temp64.val32.upper;
430         c->ErrDesc.Len = sizeof(ErrorInfo_struct);
431
432         c->ctlr = h->ctlr;
433         return c;
434 }
435
436 /*
437  * Frees a command block that was previously allocated with cmd_alloc().
438  */
439 static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
440 {
441         int i;
442         u64bit temp64;
443
444         if (!got_from_pool) {
445                 temp64.val32.lower = c->ErrDesc.Addr.lower;
446                 temp64.val32.upper = c->ErrDesc.Addr.upper;
447                 pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
448                                     c->err_info, (dma_addr_t) temp64.val);
449                 pci_free_consistent(h->pdev, sizeof(CommandList_struct),
450                                     c, (dma_addr_t) c->busaddr);
451         } else {
452                 i = c - h->cmd_pool;
453                 clear_bit(i & (BITS_PER_LONG - 1),
454                           h->cmd_pool_bits + (i / BITS_PER_LONG));
455                 h->nr_frees++;
456         }
457 }
458
459 static inline ctlr_info_t *get_host(struct gendisk *disk)
460 {
461         return disk->queue->queuedata;
462 }
463
464 static inline drive_info_struct *get_drv(struct gendisk *disk)
465 {
466         return disk->private_data;
467 }
468
469 /*
470  * Open.  Make sure the device is really there.
471  */
472 static int cciss_open(struct inode *inode, struct file *filep)
473 {
474         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
475         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
476
477 #ifdef CCISS_DEBUG
478         printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
479 #endif                          /* CCISS_DEBUG */
480
481         if (host->busy_initializing || drv->busy_configuring)
482                 return -EBUSY;
483         /*
484          * Root is allowed to open raw volume zero even if it's not configured
485          * so array config can still work. Root is also allowed to open any
486          * volume that has a LUN ID, so it can issue IOCTL to reread the
487          * disk information.  I don't think I really like this
488          * but I'm already using way to many device nodes to claim another one
489          * for "raw controller".
490          */
491         if (drv->nr_blocks == 0) {
492                 if (iminor(inode) != 0) {       /* not node 0? */
493                         /* if not node 0 make sure it is a partition = 0 */
494                         if (iminor(inode) & 0x0f) {
495                                 return -ENXIO;
496                                 /* if it is, make sure we have a LUN ID */
497                         } else if (drv->LunID == 0) {
498                                 return -ENXIO;
499                         }
500                 }
501                 if (!capable(CAP_SYS_ADMIN))
502                         return -EPERM;
503         }
504         drv->usage_count++;
505         host->usage_count++;
506         return 0;
507 }
508
509 /*
510  * Close.  Sync first.
511  */
512 static int cciss_release(struct inode *inode, struct file *filep)
513 {
514         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
515         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
516
517 #ifdef CCISS_DEBUG
518         printk(KERN_DEBUG "cciss_release %s\n",
519                inode->i_bdev->bd_disk->disk_name);
520 #endif                          /* CCISS_DEBUG */
521
522         drv->usage_count--;
523         host->usage_count--;
524         return 0;
525 }
526
527 #ifdef CONFIG_COMPAT
528
529 static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
530 {
531         int ret;
532         lock_kernel();
533         ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg);
534         unlock_kernel();
535         return ret;
536 }
537
538 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
539                                   unsigned long arg);
540 static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
541                                       unsigned long arg);
542
543 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
544 {
545         switch (cmd) {
546         case CCISS_GETPCIINFO:
547         case CCISS_GETINTINFO:
548         case CCISS_SETINTINFO:
549         case CCISS_GETNODENAME:
550         case CCISS_SETNODENAME:
551         case CCISS_GETHEARTBEAT:
552         case CCISS_GETBUSTYPES:
553         case CCISS_GETFIRMVER:
554         case CCISS_GETDRIVVER:
555         case CCISS_REVALIDVOLS:
556         case CCISS_DEREGDISK:
557         case CCISS_REGNEWDISK:
558         case CCISS_REGNEWD:
559         case CCISS_RESCANDISK:
560         case CCISS_GETLUNINFO:
561                 return do_ioctl(f, cmd, arg);
562
563         case CCISS_PASSTHRU32:
564                 return cciss_ioctl32_passthru(f, cmd, arg);
565         case CCISS_BIG_PASSTHRU32:
566                 return cciss_ioctl32_big_passthru(f, cmd, arg);
567
568         default:
569                 return -ENOIOCTLCMD;
570         }
571 }
572
573 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
574                                   unsigned long arg)
575 {
576         IOCTL32_Command_struct __user *arg32 =
577             (IOCTL32_Command_struct __user *) arg;
578         IOCTL_Command_struct arg64;
579         IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
580         int err;
581         u32 cp;
582
583         err = 0;
584         err |=
585             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
586                            sizeof(arg64.LUN_info));
587         err |=
588             copy_from_user(&arg64.Request, &arg32->Request,
589                            sizeof(arg64.Request));
590         err |=
591             copy_from_user(&arg64.error_info, &arg32->error_info,
592                            sizeof(arg64.error_info));
593         err |= get_user(arg64.buf_size, &arg32->buf_size);
594         err |= get_user(cp, &arg32->buf);
595         arg64.buf = compat_ptr(cp);
596         err |= copy_to_user(p, &arg64, sizeof(arg64));
597
598         if (err)
599                 return -EFAULT;
600
601         err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
602         if (err)
603                 return err;
604         err |=
605             copy_in_user(&arg32->error_info, &p->error_info,
606                          sizeof(arg32->error_info));
607         if (err)
608                 return -EFAULT;
609         return err;
610 }
611
612 static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
613                                       unsigned long arg)
614 {
615         BIG_IOCTL32_Command_struct __user *arg32 =
616             (BIG_IOCTL32_Command_struct __user *) arg;
617         BIG_IOCTL_Command_struct arg64;
618         BIG_IOCTL_Command_struct __user *p =
619             compat_alloc_user_space(sizeof(arg64));
620         int err;
621         u32 cp;
622
623         err = 0;
624         err |=
625             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
626                            sizeof(arg64.LUN_info));
627         err |=
628             copy_from_user(&arg64.Request, &arg32->Request,
629                            sizeof(arg64.Request));
630         err |=
631             copy_from_user(&arg64.error_info, &arg32->error_info,
632                            sizeof(arg64.error_info));
633         err |= get_user(arg64.buf_size, &arg32->buf_size);
634         err |= get_user(arg64.malloc_size, &arg32->malloc_size);
635         err |= get_user(cp, &arg32->buf);
636         arg64.buf = compat_ptr(cp);
637         err |= copy_to_user(p, &arg64, sizeof(arg64));
638
639         if (err)
640                 return -EFAULT;
641
642         err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
643         if (err)
644                 return err;
645         err |=
646             copy_in_user(&arg32->error_info, &p->error_info,
647                          sizeof(arg32->error_info));
648         if (err)
649                 return -EFAULT;
650         return err;
651 }
652 #endif
653
654 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
655 {
656         drive_info_struct *drv = get_drv(bdev->bd_disk);
657
658         if (!drv->cylinders)
659                 return -ENXIO;
660
661         geo->heads = drv->heads;
662         geo->sectors = drv->sectors;
663         geo->cylinders = drv->cylinders;
664         return 0;
665 }
666
667 /*
668  * ioctl
669  */
670 static int cciss_ioctl(struct inode *inode, struct file *filep,
671                        unsigned int cmd, unsigned long arg)
672 {
673         struct block_device *bdev = inode->i_bdev;
674         struct gendisk *disk = bdev->bd_disk;
675         ctlr_info_t *host = get_host(disk);
676         drive_info_struct *drv = get_drv(disk);
677         int ctlr = host->ctlr;
678         void __user *argp = (void __user *)arg;
679
680 #ifdef CCISS_DEBUG
681         printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
682 #endif                          /* CCISS_DEBUG */
683
684         switch (cmd) {
685         case CCISS_GETPCIINFO:
686                 {
687                         cciss_pci_info_struct pciinfo;
688
689                         if (!arg)
690                                 return -EINVAL;
691                         pciinfo.domain = pci_domain_nr(host->pdev->bus);
692                         pciinfo.bus = host->pdev->bus->number;
693                         pciinfo.dev_fn = host->pdev->devfn;
694                         pciinfo.board_id = host->board_id;
695                         if (copy_to_user
696                             (argp, &pciinfo, sizeof(cciss_pci_info_struct)))
697                                 return -EFAULT;
698                         return 0;
699                 }
700         case CCISS_GETINTINFO:
701                 {
702                         cciss_coalint_struct intinfo;
703                         if (!arg)
704                                 return -EINVAL;
705                         intinfo.delay =
706                             readl(&host->cfgtable->HostWrite.CoalIntDelay);
707                         intinfo.count =
708                             readl(&host->cfgtable->HostWrite.CoalIntCount);
709                         if (copy_to_user
710                             (argp, &intinfo, sizeof(cciss_coalint_struct)))
711                                 return -EFAULT;
712                         return 0;
713                 }
714         case CCISS_SETINTINFO:
715                 {
716                         cciss_coalint_struct intinfo;
717                         unsigned long flags;
718                         int i;
719
720                         if (!arg)
721                                 return -EINVAL;
722                         if (!capable(CAP_SYS_ADMIN))
723                                 return -EPERM;
724                         if (copy_from_user
725                             (&intinfo, argp, sizeof(cciss_coalint_struct)))
726                                 return -EFAULT;
727                         if ((intinfo.delay == 0) && (intinfo.count == 0))
728                         {
729 //                      printk("cciss_ioctl: delay and count cannot be 0\n");
730                                 return -EINVAL;
731                         }
732                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
733                         /* Update the field, and then ring the doorbell */
734                         writel(intinfo.delay,
735                                &(host->cfgtable->HostWrite.CoalIntDelay));
736                         writel(intinfo.count,
737                                &(host->cfgtable->HostWrite.CoalIntCount));
738                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
739
740                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
741                                 if (!(readl(host->vaddr + SA5_DOORBELL)
742                                       & CFGTBL_ChangeReq))
743                                         break;
744                                 /* delay and try again */
745                                 udelay(1000);
746                         }
747                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
748                         if (i >= MAX_IOCTL_CONFIG_WAIT)
749                                 return -EAGAIN;
750                         return 0;
751                 }
752         case CCISS_GETNODENAME:
753                 {
754                         NodeName_type NodeName;
755                         int i;
756
757                         if (!arg)
758                                 return -EINVAL;
759                         for (i = 0; i < 16; i++)
760                                 NodeName[i] =
761                                     readb(&host->cfgtable->ServerName[i]);
762                         if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
763                                 return -EFAULT;
764                         return 0;
765                 }
766         case CCISS_SETNODENAME:
767                 {
768                         NodeName_type NodeName;
769                         unsigned long flags;
770                         int i;
771
772                         if (!arg)
773                                 return -EINVAL;
774                         if (!capable(CAP_SYS_ADMIN))
775                                 return -EPERM;
776
777                         if (copy_from_user
778                             (NodeName, argp, sizeof(NodeName_type)))
779                                 return -EFAULT;
780
781                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
782
783                         /* Update the field, and then ring the doorbell */
784                         for (i = 0; i < 16; i++)
785                                 writeb(NodeName[i],
786                                        &host->cfgtable->ServerName[i]);
787
788                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
789
790                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
791                                 if (!(readl(host->vaddr + SA5_DOORBELL)
792                                       & CFGTBL_ChangeReq))
793                                         break;
794                                 /* delay and try again */
795                                 udelay(1000);
796                         }
797                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
798                         if (i >= MAX_IOCTL_CONFIG_WAIT)
799                                 return -EAGAIN;
800                         return 0;
801                 }
802
803         case CCISS_GETHEARTBEAT:
804                 {
805                         Heartbeat_type heartbeat;
806
807                         if (!arg)
808                                 return -EINVAL;
809                         heartbeat = readl(&host->cfgtable->HeartBeat);
810                         if (copy_to_user
811                             (argp, &heartbeat, sizeof(Heartbeat_type)))
812                                 return -EFAULT;
813                         return 0;
814                 }
815         case CCISS_GETBUSTYPES:
816                 {
817                         BusTypes_type BusTypes;
818
819                         if (!arg)
820                                 return -EINVAL;
821                         BusTypes = readl(&host->cfgtable->BusTypes);
822                         if (copy_to_user
823                             (argp, &BusTypes, sizeof(BusTypes_type)))
824                                 return -EFAULT;
825                         return 0;
826                 }
827         case CCISS_GETFIRMVER:
828                 {
829                         FirmwareVer_type firmware;
830
831                         if (!arg)
832                                 return -EINVAL;
833                         memcpy(firmware, host->firm_ver, 4);
834
835                         if (copy_to_user
836                             (argp, firmware, sizeof(FirmwareVer_type)))
837                                 return -EFAULT;
838                         return 0;
839                 }
840         case CCISS_GETDRIVVER:
841                 {
842                         DriverVer_type DriverVer = DRIVER_VERSION;
843
844                         if (!arg)
845                                 return -EINVAL;
846
847                         if (copy_to_user
848                             (argp, &DriverVer, sizeof(DriverVer_type)))
849                                 return -EFAULT;
850                         return 0;
851                 }
852
853         case CCISS_REVALIDVOLS:
854                 if (bdev != bdev->bd_contains || drv != host->drv)
855                         return -ENXIO;
856                 return revalidate_allvol(host);
857
858         case CCISS_GETLUNINFO:{
859                         LogvolInfo_struct luninfo;
860
861                         luninfo.LunID = drv->LunID;
862                         luninfo.num_opens = drv->usage_count;
863                         luninfo.num_parts = 0;
864                         if (copy_to_user(argp, &luninfo,
865                                          sizeof(LogvolInfo_struct)))
866                                 return -EFAULT;
867                         return 0;
868                 }
869         case CCISS_DEREGDISK:
870                 return rebuild_lun_table(host, disk);
871
872         case CCISS_REGNEWD:
873                 return rebuild_lun_table(host, NULL);
874
875         case CCISS_PASSTHRU:
876                 {
877                         IOCTL_Command_struct iocommand;
878                         CommandList_struct *c;
879                         char *buff = NULL;
880                         u64bit temp64;
881                         unsigned long flags;
882                         DECLARE_COMPLETION(wait);
883
884                         if (!arg)
885                                 return -EINVAL;
886
887                         if (!capable(CAP_SYS_RAWIO))
888                                 return -EPERM;
889
890                         if (copy_from_user
891                             (&iocommand, argp, sizeof(IOCTL_Command_struct)))
892                                 return -EFAULT;
893                         if ((iocommand.buf_size < 1) &&
894                             (iocommand.Request.Type.Direction != XFER_NONE)) {
895                                 return -EINVAL;
896                         }
897 #if 0                           /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
898                         /* Check kmalloc limits */
899                         if (iocommand.buf_size > 128000)
900                                 return -EINVAL;
901 #endif
902                         if (iocommand.buf_size > 0) {
903                                 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
904                                 if (buff == NULL)
905                                         return -EFAULT;
906                         }
907                         if (iocommand.Request.Type.Direction == XFER_WRITE) {
908                                 /* Copy the data into the buffer we created */
909                                 if (copy_from_user
910                                     (buff, iocommand.buf, iocommand.buf_size)) {
911                                         kfree(buff);
912                                         return -EFAULT;
913                                 }
914                         } else {
915                                 memset(buff, 0, iocommand.buf_size);
916                         }
917                         if ((c = cmd_alloc(host, 0)) == NULL) {
918                                 kfree(buff);
919                                 return -ENOMEM;
920                         }
921                         // Fill in the command type
922                         c->cmd_type = CMD_IOCTL_PEND;
923                         // Fill in Command Header
924                         c->Header.ReplyQueue = 0;       // unused in simple mode
925                         if (iocommand.buf_size > 0)     // buffer to fill
926                         {
927                                 c->Header.SGList = 1;
928                                 c->Header.SGTotal = 1;
929                         } else  // no buffers to fill
930                         {
931                                 c->Header.SGList = 0;
932                                 c->Header.SGTotal = 0;
933                         }
934                         c->Header.LUN = iocommand.LUN_info;
935                         c->Header.Tag.lower = c->busaddr;       // use the kernel address the cmd block for tag
936
937                         // Fill in Request block
938                         c->Request = iocommand.Request;
939
940                         // Fill in the scatter gather information
941                         if (iocommand.buf_size > 0) {
942                                 temp64.val = pci_map_single(host->pdev, buff,
943                                         iocommand.buf_size,
944                                         PCI_DMA_BIDIRECTIONAL);
945                                 c->SG[0].Addr.lower = temp64.val32.lower;
946                                 c->SG[0].Addr.upper = temp64.val32.upper;
947                                 c->SG[0].Len = iocommand.buf_size;
948                                 c->SG[0].Ext = 0;       // we are not chaining
949                         }
950                         c->waiting = &wait;
951
952                         /* Put the request on the tail of the request queue */
953                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
954                         addQ(&host->reqQ, c);
955                         host->Qdepth++;
956                         start_io(host);
957                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
958
959                         wait_for_completion(&wait);
960
961                         /* unlock the buffers from DMA */
962                         temp64.val32.lower = c->SG[0].Addr.lower;
963                         temp64.val32.upper = c->SG[0].Addr.upper;
964                         pci_unmap_single(host->pdev, (dma_addr_t) temp64.val,
965                                          iocommand.buf_size,
966                                          PCI_DMA_BIDIRECTIONAL);
967
968                         /* Copy the error information out */
969                         iocommand.error_info = *(c->err_info);
970                         if (copy_to_user
971                             (argp, &iocommand, sizeof(IOCTL_Command_struct))) {
972                                 kfree(buff);
973                                 cmd_free(host, c, 0);
974                                 return -EFAULT;
975                         }
976
977                         if (iocommand.Request.Type.Direction == XFER_READ) {
978                                 /* Copy the data out of the buffer we created */
979                                 if (copy_to_user
980                                     (iocommand.buf, buff, iocommand.buf_size)) {
981                                         kfree(buff);
982                                         cmd_free(host, c, 0);
983                                         return -EFAULT;
984                                 }
985                         }
986                         kfree(buff);
987                         cmd_free(host, c, 0);
988                         return 0;
989                 }
990         case CCISS_BIG_PASSTHRU:{
991                         BIG_IOCTL_Command_struct *ioc;
992                         CommandList_struct *c;
993                         unsigned char **buff = NULL;
994                         int *buff_size = NULL;
995                         u64bit temp64;
996                         unsigned long flags;
997                         BYTE sg_used = 0;
998                         int status = 0;
999                         int i;
1000                         DECLARE_COMPLETION(wait);
1001                         __u32 left;
1002                         __u32 sz;
1003                         BYTE __user *data_ptr;
1004
1005                         if (!arg)
1006                                 return -EINVAL;
1007                         if (!capable(CAP_SYS_RAWIO))
1008                                 return -EPERM;
1009                         ioc = (BIG_IOCTL_Command_struct *)
1010                             kmalloc(sizeof(*ioc), GFP_KERNEL);
1011                         if (!ioc) {
1012                                 status = -ENOMEM;
1013                                 goto cleanup1;
1014                         }
1015                         if (copy_from_user(ioc, argp, sizeof(*ioc))) {
1016                                 status = -EFAULT;
1017                                 goto cleanup1;
1018                         }
1019                         if ((ioc->buf_size < 1) &&
1020                             (ioc->Request.Type.Direction != XFER_NONE)) {
1021                                 status = -EINVAL;
1022                                 goto cleanup1;
1023                         }
1024                         /* Check kmalloc limits  using all SGs */
1025                         if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
1026                                 status = -EINVAL;
1027                                 goto cleanup1;
1028                         }
1029                         if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
1030                                 status = -EINVAL;
1031                                 goto cleanup1;
1032                         }
1033                         buff =
1034                             kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
1035                         if (!buff) {
1036                                 status = -ENOMEM;
1037                                 goto cleanup1;
1038                         }
1039                         buff_size = (int *)kmalloc(MAXSGENTRIES * sizeof(int),
1040                                                    GFP_KERNEL);
1041                         if (!buff_size) {
1042                                 status = -ENOMEM;
1043                                 goto cleanup1;
1044                         }
1045                         left = ioc->buf_size;
1046                         data_ptr = ioc->buf;
1047                         while (left) {
1048                                 sz = (left >
1049                                       ioc->malloc_size) ? ioc->
1050                                     malloc_size : left;
1051                                 buff_size[sg_used] = sz;
1052                                 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
1053                                 if (buff[sg_used] == NULL) {
1054                                         status = -ENOMEM;
1055                                         goto cleanup1;
1056                                 }
1057                                 if (ioc->Request.Type.Direction == XFER_WRITE) {
1058                                         if (copy_from_user
1059                                             (buff[sg_used], data_ptr, sz)) {
1060                                                 status = -ENOMEM;
1061                                                 goto cleanup1;
1062                                         }
1063                                 } else {
1064                                         memset(buff[sg_used], 0, sz);
1065                                 }
1066                                 left -= sz;
1067                                 data_ptr += sz;
1068                                 sg_used++;
1069                         }
1070                         if ((c = cmd_alloc(host, 0)) == NULL) {
1071                                 status = -ENOMEM;
1072                                 goto cleanup1;
1073                         }
1074                         c->cmd_type = CMD_IOCTL_PEND;
1075                         c->Header.ReplyQueue = 0;
1076
1077                         if (ioc->buf_size > 0) {
1078                                 c->Header.SGList = sg_used;
1079                                 c->Header.SGTotal = sg_used;
1080                         } else {
1081                                 c->Header.SGList = 0;
1082                                 c->Header.SGTotal = 0;
1083                         }
1084                         c->Header.LUN = ioc->LUN_info;
1085                         c->Header.Tag.lower = c->busaddr;
1086
1087                         c->Request = ioc->Request;
1088                         if (ioc->buf_size > 0) {
1089                                 int i;
1090                                 for (i = 0; i < sg_used; i++) {
1091                                         temp64.val =
1092                                             pci_map_single(host->pdev, buff[i],
1093                                                     buff_size[i],
1094                                                     PCI_DMA_BIDIRECTIONAL);
1095                                         c->SG[i].Addr.lower =
1096                                             temp64.val32.lower;
1097                                         c->SG[i].Addr.upper =
1098                                             temp64.val32.upper;
1099                                         c->SG[i].Len = buff_size[i];
1100                                         c->SG[i].Ext = 0;       /* we are not chaining */
1101                                 }
1102                         }
1103                         c->waiting = &wait;
1104                         /* Put the request on the tail of the request queue */
1105                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1106                         addQ(&host->reqQ, c);
1107                         host->Qdepth++;
1108                         start_io(host);
1109                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1110                         wait_for_completion(&wait);
1111                         /* unlock the buffers from DMA */
1112                         for (i = 0; i < sg_used; i++) {
1113                                 temp64.val32.lower = c->SG[i].Addr.lower;
1114                                 temp64.val32.upper = c->SG[i].Addr.upper;
1115                                 pci_unmap_single(host->pdev,
1116                                         (dma_addr_t) temp64.val, buff_size[i],
1117                                         PCI_DMA_BIDIRECTIONAL);
1118                         }
1119                         /* Copy the error information out */
1120                         ioc->error_info = *(c->err_info);
1121                         if (copy_to_user(argp, ioc, sizeof(*ioc))) {
1122                                 cmd_free(host, c, 0);
1123                                 status = -EFAULT;
1124                                 goto cleanup1;
1125                         }
1126                         if (ioc->Request.Type.Direction == XFER_READ) {
1127                                 /* Copy the data out of the buffer we created */
1128                                 BYTE __user *ptr = ioc->buf;
1129                                 for (i = 0; i < sg_used; i++) {
1130                                         if (copy_to_user
1131                                             (ptr, buff[i], buff_size[i])) {
1132                                                 cmd_free(host, c, 0);
1133                                                 status = -EFAULT;
1134                                                 goto cleanup1;
1135                                         }
1136                                         ptr += buff_size[i];
1137                                 }
1138                         }
1139                         cmd_free(host, c, 0);
1140                         status = 0;
1141                       cleanup1:
1142                         if (buff) {
1143                                 for (i = 0; i < sg_used; i++)
1144                                         kfree(buff[i]);
1145                                 kfree(buff);
1146                         }
1147                         kfree(buff_size);
1148                         kfree(ioc);
1149                         return status;
1150                 }
1151         default:
1152                 return -ENOTTY;
1153         }
1154 }
1155
1156 /*
1157  * revalidate_allvol is for online array config utilities.  After a
1158  * utility reconfigures the drives in the array, it can use this function
1159  * (through an ioctl) to make the driver zap any previous disk structs for
1160  * that controller and get new ones.
1161  *
1162  * Right now I'm using the getgeometry() function to do this, but this
1163  * function should probably be finer grained and allow you to revalidate one
1164  * particular logical volume (instead of all of them on a particular
1165  * controller).
1166  */
1167 static int revalidate_allvol(ctlr_info_t *host)
1168 {
1169         int ctlr = host->ctlr, i;
1170         unsigned long flags;
1171
1172         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1173         if (host->usage_count > 1) {
1174                 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1175                 printk(KERN_WARNING "cciss: Device busy for volume"
1176                        " revalidation (usage=%d)\n", host->usage_count);
1177                 return -EBUSY;
1178         }
1179         host->usage_count++;
1180         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1181
1182         for (i = 0; i < NWD; i++) {
1183                 struct gendisk *disk = host->gendisk[i];
1184                 if (disk) {
1185                         request_queue_t *q = disk->queue;
1186
1187                         if (disk->flags & GENHD_FL_UP)
1188                                 del_gendisk(disk);
1189                         if (q)
1190                                 blk_cleanup_queue(q);
1191                 }
1192         }
1193
1194         /*
1195          * Set the partition and block size structures for all volumes
1196          * on this controller to zero.  We will reread all of this data
1197          */
1198         memset(host->drv, 0, sizeof(drive_info_struct)
1199                * CISS_MAX_LUN);
1200         /*
1201          * Tell the array controller not to give us any interrupts while
1202          * we check the new geometry.  Then turn interrupts back on when
1203          * we're done.
1204          */
1205         host->access.set_intr_mask(host, CCISS_INTR_OFF);
1206         cciss_getgeometry(ctlr);
1207         host->access.set_intr_mask(host, CCISS_INTR_ON);
1208
1209         /* Loop through each real device */
1210         for (i = 0; i < NWD; i++) {
1211                 struct gendisk *disk = host->gendisk[i];
1212                 drive_info_struct *drv = &(host->drv[i]);
1213                 /* we must register the controller even if no disks exist */
1214                 /* this is for the online array utilities */
1215                 if (!drv->heads && i)
1216                         continue;
1217                 blk_queue_hardsect_size(drv->queue, drv->block_size);
1218                 set_capacity(disk, drv->nr_blocks);
1219                 add_disk(disk);
1220         }
1221         host->usage_count--;
1222         return 0;
1223 }
1224
1225 static inline void complete_buffers(struct bio *bio, int status)
1226 {
1227         while (bio) {
1228                 struct bio *xbh = bio->bi_next;
1229                 int nr_sectors = bio_sectors(bio);
1230
1231                 bio->bi_next = NULL;
1232                 bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
1233                 bio = xbh;
1234         }
1235 }
1236
1237 static void cciss_check_queues(ctlr_info_t *h)
1238 {
1239         int start_queue = h->next_to_run;
1240         int i;
1241
1242         /* check to see if we have maxed out the number of commands that can
1243          * be placed on the queue.  If so then exit.  We do this check here
1244          * in case the interrupt we serviced was from an ioctl and did not
1245          * free any new commands.
1246          */
1247         if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
1248                 return;
1249
1250         /* We have room on the queue for more commands.  Now we need to queue
1251          * them up.  We will also keep track of the next queue to run so
1252          * that every queue gets a chance to be started first.
1253          */
1254         for (i = 0; i < h->highest_lun + 1; i++) {
1255                 int curr_queue = (start_queue + i) % (h->highest_lun + 1);
1256                 /* make sure the disk has been added and the drive is real
1257                  * because this can be called from the middle of init_one.
1258                  */
1259                 if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
1260                         continue;
1261                 blk_start_queue(h->gendisk[curr_queue]->queue);
1262
1263                 /* check to see if we have maxed out the number of commands
1264                  * that can be placed on the queue.
1265                  */
1266                 if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) {
1267                         if (curr_queue == start_queue) {
1268                                 h->next_to_run =
1269                                     (start_queue + 1) % (h->highest_lun + 1);
1270                                 break;
1271                         } else {
1272                                 h->next_to_run = curr_queue;
1273                                 break;
1274                         }
1275                 } else {
1276                         curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
1277                 }
1278         }
1279 }
1280
1281 static void cciss_softirq_done(struct request *rq)
1282 {
1283         CommandList_struct *cmd = rq->completion_data;
1284         ctlr_info_t *h = hba[cmd->ctlr];
1285         unsigned long flags;
1286         u64bit temp64;
1287         int i, ddir;
1288
1289         if (cmd->Request.Type.Direction == XFER_READ)
1290                 ddir = PCI_DMA_FROMDEVICE;
1291         else
1292                 ddir = PCI_DMA_TODEVICE;
1293
1294         /* command did not need to be retried */
1295         /* unmap the DMA mapping for all the scatter gather elements */
1296         for (i = 0; i < cmd->Header.SGList; i++) {
1297                 temp64.val32.lower = cmd->SG[i].Addr.lower;
1298                 temp64.val32.upper = cmd->SG[i].Addr.upper;
1299                 pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
1300         }
1301
1302         complete_buffers(rq->bio, rq->errors);
1303
1304 #ifdef CCISS_DEBUG
1305         printk("Done with %p\n", rq);
1306 #endif                          /* CCISS_DEBUG */
1307
1308         add_disk_randomness(rq->rq_disk);
1309         spin_lock_irqsave(&h->lock, flags);
1310         end_that_request_last(rq, rq->errors);
1311         cmd_free(h, cmd, 1);
1312         cciss_check_queues(h);
1313         spin_unlock_irqrestore(&h->lock, flags);
1314 }
1315
1316 /* This function will check the usage_count of the drive to be updated/added.
1317  * If the usage_count is zero then the drive information will be updated and
1318  * the disk will be re-registered with the kernel.  If not then it will be
1319  * left alone for the next reboot.  The exception to this is disk 0 which
1320  * will always be left registered with the kernel since it is also the
1321  * controller node.  Any changes to disk 0 will show up on the next
1322  * reboot.
1323  */
1324 static void cciss_update_drive_info(int ctlr, int drv_index)
1325 {
1326         ctlr_info_t *h = hba[ctlr];
1327         struct gendisk *disk;
1328         ReadCapdata_struct *size_buff = NULL;
1329         InquiryData_struct *inq_buff = NULL;
1330         unsigned int block_size;
1331         unsigned int total_size;
1332         unsigned long flags = 0;
1333         int ret = 0;
1334
1335         /* if the disk already exists then deregister it before proceeding */
1336         if (h->drv[drv_index].raid_level != -1) {
1337                 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1338                 h->drv[drv_index].busy_configuring = 1;
1339                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1340                 ret = deregister_disk(h->gendisk[drv_index],
1341                                       &h->drv[drv_index], 0);
1342                 h->drv[drv_index].busy_configuring = 0;
1343         }
1344
1345         /* If the disk is in use return */
1346         if (ret)
1347                 return;
1348
1349         /* Get information about the disk and modify the driver structure */
1350         size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
1351         if (size_buff == NULL)
1352                 goto mem_msg;
1353         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1354         if (inq_buff == NULL)
1355                 goto mem_msg;
1356
1357         cciss_read_capacity(ctlr, drv_index, size_buff, 1,
1358                             &total_size, &block_size);
1359         cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
1360                                inq_buff, &h->drv[drv_index]);
1361
1362         ++h->num_luns;
1363         disk = h->gendisk[drv_index];
1364         set_capacity(disk, h->drv[drv_index].nr_blocks);
1365
1366         /* if it's the controller it's already added */
1367         if (drv_index) {
1368                 disk->queue = blk_init_queue(do_cciss_request, &h->lock);
1369
1370                 /* Set up queue information */
1371                 disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
1372                 blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
1373
1374                 /* This is a hardware imposed limit. */
1375                 blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
1376
1377                 /* This is a limit in the driver and could be eliminated. */
1378                 blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
1379
1380                 blk_queue_max_sectors(disk->queue, 512);
1381
1382                 blk_queue_softirq_done(disk->queue, cciss_softirq_done);
1383
1384                 disk->queue->queuedata = hba[ctlr];
1385
1386                 blk_queue_hardsect_size(disk->queue,
1387                                         hba[ctlr]->drv[drv_index].block_size);
1388
1389                 h->drv[drv_index].queue = disk->queue;
1390                 add_disk(disk);
1391         }
1392
1393       freeret:
1394         kfree(size_buff);
1395         kfree(inq_buff);
1396         return;
1397       mem_msg:
1398         printk(KERN_ERR "cciss: out of memory\n");
1399         goto freeret;
1400 }
1401
1402 /* This function will find the first index of the controllers drive array
1403  * that has a -1 for the raid_level and will return that index.  This is
1404  * where new drives will be added.  If the index to be returned is greater
1405  * than the highest_lun index for the controller then highest_lun is set
1406  * to this new index.  If there are no available indexes then -1 is returned.
1407  */
1408 static int cciss_find_free_drive_index(int ctlr)
1409 {
1410         int i;
1411
1412         for (i = 0; i < CISS_MAX_LUN; i++) {
1413                 if (hba[ctlr]->drv[i].raid_level == -1) {
1414                         if (i > hba[ctlr]->highest_lun)
1415                                 hba[ctlr]->highest_lun = i;
1416                         return i;
1417                 }
1418         }
1419         return -1;
1420 }
1421
1422 /* This function will add and remove logical drives from the Logical
1423  * drive array of the controller and maintain persistency of ordering
1424  * so that mount points are preserved until the next reboot.  This allows
1425  * for the removal of logical drives in the middle of the drive array
1426  * without a re-ordering of those drives.
1427  * INPUT
1428  * h            = The controller to perform the operations on
1429  * del_disk     = The disk to remove if specified.  If the value given
1430  *                is NULL then no disk is removed.
1431  */
1432 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
1433 {
1434         int ctlr = h->ctlr;
1435         int num_luns;
1436         ReportLunData_struct *ld_buff = NULL;
1437         drive_info_struct *drv = NULL;
1438         int return_code;
1439         int listlength = 0;
1440         int i;
1441         int drv_found;
1442         int drv_index = 0;
1443         __u32 lunid = 0;
1444         unsigned long flags;
1445
1446         /* Set busy_configuring flag for this operation */
1447         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1448         if (h->num_luns >= CISS_MAX_LUN) {
1449                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1450                 return -EINVAL;
1451         }
1452
1453         if (h->busy_configuring) {
1454                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1455                 return -EBUSY;
1456         }
1457         h->busy_configuring = 1;
1458
1459         /* if del_disk is NULL then we are being called to add a new disk
1460          * and update the logical drive table.  If it is not NULL then
1461          * we will check if the disk is in use or not.
1462          */
1463         if (del_disk != NULL) {
1464                 drv = get_drv(del_disk);
1465                 drv->busy_configuring = 1;
1466                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1467                 return_code = deregister_disk(del_disk, drv, 1);
1468                 drv->busy_configuring = 0;
1469                 h->busy_configuring = 0;
1470                 return return_code;
1471         } else {
1472                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1473                 if (!capable(CAP_SYS_RAWIO))
1474                         return -EPERM;
1475
1476                 ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
1477                 if (ld_buff == NULL)
1478                         goto mem_msg;
1479
1480                 return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
1481                                               sizeof(ReportLunData_struct), 0,
1482                                               0, 0, TYPE_CMD);
1483
1484                 if (return_code == IO_OK) {
1485                         listlength |=
1486                             (0xff & (unsigned int)(ld_buff->LUNListLength[0]))
1487                             << 24;
1488                         listlength |=
1489                             (0xff & (unsigned int)(ld_buff->LUNListLength[1]))
1490                             << 16;
1491                         listlength |=
1492                             (0xff & (unsigned int)(ld_buff->LUNListLength[2]))
1493                             << 8;
1494                         listlength |=
1495                             0xff & (unsigned int)(ld_buff->LUNListLength[3]);
1496                 } else {        /* reading number of logical volumes failed */
1497                         printk(KERN_WARNING "cciss: report logical volume"
1498                                " command failed\n");
1499                         listlength = 0;
1500                         goto freeret;
1501                 }
1502
1503                 num_luns = listlength / 8;      /* 8 bytes per entry */
1504                 if (num_luns > CISS_MAX_LUN) {
1505                         num_luns = CISS_MAX_LUN;
1506                         printk(KERN_WARNING "cciss: more luns configured"
1507                                " on controller than can be handled by"
1508                                " this driver.\n");
1509                 }
1510
1511                 /* Compare controller drive array to drivers drive array.
1512                  * Check for updates in the drive information and any new drives
1513                  * on the controller.
1514                  */
1515                 for (i = 0; i < num_luns; i++) {
1516                         int j;
1517
1518                         drv_found = 0;
1519
1520                         lunid = (0xff &
1521                                  (unsigned int)(ld_buff->LUN[i][3])) << 24;
1522                         lunid |= (0xff &
1523                                   (unsigned int)(ld_buff->LUN[i][2])) << 16;
1524                         lunid |= (0xff &
1525                                   (unsigned int)(ld_buff->LUN[i][1])) << 8;
1526                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
1527
1528                         /* Find if the LUN is already in the drive array
1529                          * of the controller.  If so then update its info
1530                          * if not is use.  If it does not exist then find
1531                          * the first free index and add it.
1532                          */
1533                         for (j = 0; j <= h->highest_lun; j++) {
1534                                 if (h->drv[j].LunID == lunid) {
1535                                         drv_index = j;
1536                                         drv_found = 1;
1537                                 }
1538                         }
1539
1540                         /* check if the drive was found already in the array */
1541                         if (!drv_found) {
1542                                 drv_index = cciss_find_free_drive_index(ctlr);
1543                                 if (drv_index == -1)
1544                                         goto freeret;
1545
1546                         }
1547                         h->drv[drv_index].LunID = lunid;
1548                         cciss_update_drive_info(ctlr, drv_index);
1549                 }               /* end for */
1550         }                       /* end else */
1551
1552       freeret:
1553         kfree(ld_buff);
1554         h->busy_configuring = 0;
1555         /* We return -1 here to tell the ACU that we have registered/updated
1556          * all of the drives that we can and to keep it from calling us
1557          * additional times.
1558          */
1559         return -1;
1560       mem_msg:
1561         printk(KERN_ERR "cciss: out of memory\n");
1562         goto freeret;
1563 }
1564
1565 /* This function will deregister the disk and it's queue from the
1566  * kernel.  It must be called with the controller lock held and the
1567  * drv structures busy_configuring flag set.  It's parameters are:
1568  *
1569  * disk = This is the disk to be deregistered
1570  * drv  = This is the drive_info_struct associated with the disk to be
1571  *        deregistered.  It contains information about the disk used
1572  *        by the driver.
1573  * clear_all = This flag determines whether or not the disk information
1574  *             is going to be completely cleared out and the highest_lun
1575  *             reset.  Sometimes we want to clear out information about
1576  *             the disk in preparation for re-adding it.  In this case
1577  *             the highest_lun should be left unchanged and the LunID
1578  *             should not be cleared.
1579 */
1580 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
1581                            int clear_all)
1582 {
1583         ctlr_info_t *h = get_host(disk);
1584
1585         if (!capable(CAP_SYS_RAWIO))
1586                 return -EPERM;
1587
1588         /* make sure logical volume is NOT is use */
1589         if (clear_all || (h->gendisk[0] == disk)) {
1590                 if (drv->usage_count > 1)
1591                         return -EBUSY;
1592         } else if (drv->usage_count > 0)
1593                 return -EBUSY;
1594
1595         /* invalidate the devices and deregister the disk.  If it is disk
1596          * zero do not deregister it but just zero out it's values.  This
1597          * allows us to delete disk zero but keep the controller registered.
1598          */
1599         if (h->gendisk[0] != disk) {
1600                 if (disk) {
1601                         request_queue_t *q = disk->queue;
1602                         if (disk->flags & GENHD_FL_UP)
1603                                 del_gendisk(disk);
1604                         if (q) {
1605                                 blk_cleanup_queue(q);
1606                                 drv->queue = NULL;
1607                         }
1608                 }
1609         }
1610
1611         --h->num_luns;
1612         /* zero out the disk size info */
1613         drv->nr_blocks = 0;
1614         drv->block_size = 0;
1615         drv->heads = 0;
1616         drv->sectors = 0;
1617         drv->cylinders = 0;
1618         drv->raid_level = -1;   /* This can be used as a flag variable to
1619                                  * indicate that this element of the drive
1620                                  * array is free.
1621                                  */
1622
1623         if (clear_all) {
1624                 /* check to see if it was the last disk */
1625                 if (drv == h->drv + h->highest_lun) {
1626                         /* if so, find the new hightest lun */
1627                         int i, newhighest = -1;
1628                         for (i = 0; i < h->highest_lun; i++) {
1629                                 /* if the disk has size > 0, it is available */
1630                                 if (h->drv[i].heads)
1631                                         newhighest = i;
1632                         }
1633                         h->highest_lun = newhighest;
1634                 }
1635
1636                 drv->LunID = 0;
1637         }
1638         return 0;
1639 }
1640
1641 static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
1642                                                                                                                            1: address logical volume log_unit,
1643                                                                                                                            2: periph device address is scsi3addr */
1644                     unsigned int log_unit, __u8 page_code,
1645                     unsigned char *scsi3addr, int cmd_type)
1646 {
1647         ctlr_info_t *h = hba[ctlr];
1648         u64bit buff_dma_handle;
1649         int status = IO_OK;
1650
1651         c->cmd_type = CMD_IOCTL_PEND;
1652         c->Header.ReplyQueue = 0;
1653         if (buff != NULL) {
1654                 c->Header.SGList = 1;
1655                 c->Header.SGTotal = 1;
1656         } else {
1657                 c->Header.SGList = 0;
1658                 c->Header.SGTotal = 0;
1659         }
1660         c->Header.Tag.lower = c->busaddr;
1661
1662         c->Request.Type.Type = cmd_type;
1663         if (cmd_type == TYPE_CMD) {
1664                 switch (cmd) {
1665                 case CISS_INQUIRY:
1666                         /* If the logical unit number is 0 then, this is going
1667                            to controller so It's a physical command
1668                            mode = 0 target = 0.  So we have nothing to write.
1669                            otherwise, if use_unit_num == 1,
1670                            mode = 1(volume set addressing) target = LUNID
1671                            otherwise, if use_unit_num == 2,
1672                            mode = 0(periph dev addr) target = scsi3addr */
1673                         if (use_unit_num == 1) {
1674                                 c->Header.LUN.LogDev.VolId =
1675                                     h->drv[log_unit].LunID;
1676                                 c->Header.LUN.LogDev.Mode = 1;
1677                         } else if (use_unit_num == 2) {
1678                                 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
1679                                        8);
1680                                 c->Header.LUN.LogDev.Mode = 0;
1681                         }
1682                         /* are we trying to read a vital product page */
1683                         if (page_code != 0) {
1684                                 c->Request.CDB[1] = 0x01;
1685                                 c->Request.CDB[2] = page_code;
1686                         }
1687                         c->Request.CDBLen = 6;
1688                         c->Request.Type.Attribute = ATTR_SIMPLE;
1689                         c->Request.Type.Direction = XFER_READ;
1690                         c->Request.Timeout = 0;
1691                         c->Request.CDB[0] = CISS_INQUIRY;
1692                         c->Request.CDB[4] = size & 0xFF;
1693                         break;
1694                 case CISS_REPORT_LOG:
1695                 case CISS_REPORT_PHYS:
1696                         /* Talking to controller so It's a physical command
1697                            mode = 00 target = 0.  Nothing to write.
1698                          */
1699                         c->Request.CDBLen = 12;
1700                         c->Request.Type.Attribute = ATTR_SIMPLE;
1701                         c->Request.Type.Direction = XFER_READ;
1702                         c->Request.Timeout = 0;
1703                         c->Request.CDB[0] = cmd;
1704                         c->Request.CDB[6] = (size >> 24) & 0xFF;        //MSB
1705                         c->Request.CDB[7] = (size >> 16) & 0xFF;
1706                         c->Request.CDB[8] = (size >> 8) & 0xFF;
1707                         c->Request.CDB[9] = size & 0xFF;
1708                         break;
1709
1710                 case CCISS_READ_CAPACITY:
1711                         c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1712                         c->Header.LUN.LogDev.Mode = 1;
1713                         c->Request.CDBLen = 10;
1714                         c->Request.Type.Attribute = ATTR_SIMPLE;
1715                         c->Request.Type.Direction = XFER_READ;
1716                         c->Request.Timeout = 0;
1717                         c->Request.CDB[0] = cmd;
1718                         break;
1719                 case CCISS_CACHE_FLUSH:
1720                         c->Request.CDBLen = 12;
1721                         c->Request.Type.Attribute = ATTR_SIMPLE;
1722                         c->Request.Type.Direction = XFER_WRITE;
1723                         c->Request.Timeout = 0;
1724                         c->Request.CDB[0] = BMIC_WRITE;
1725                         c->Request.CDB[6] = BMIC_CACHE_FLUSH;
1726                         break;
1727                 default:
1728                         printk(KERN_WARNING
1729                                "cciss%d:  Unknown Command 0x%c\n", ctlr, cmd);
1730                         return IO_ERROR;
1731                 }
1732         } else if (cmd_type == TYPE_MSG) {
1733                 switch (cmd) {
1734                 case 0: /* ABORT message */
1735                         c->Request.CDBLen = 12;
1736                         c->Request.Type.Attribute = ATTR_SIMPLE;
1737                         c->Request.Type.Direction = XFER_WRITE;
1738                         c->Request.Timeout = 0;
1739                         c->Request.CDB[0] = cmd;        /* abort */
1740                         c->Request.CDB[1] = 0;  /* abort a command */
1741                         /* buff contains the tag of the command to abort */
1742                         memcpy(&c->Request.CDB[4], buff, 8);
1743                         break;
1744                 case 1: /* RESET message */
1745                         c->Request.CDBLen = 12;
1746                         c->Request.Type.Attribute = ATTR_SIMPLE;
1747                         c->Request.Type.Direction = XFER_WRITE;
1748                         c->Request.Timeout = 0;
1749                         memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
1750                         c->Request.CDB[0] = cmd;        /* reset */
1751                         c->Request.CDB[1] = 0x04;       /* reset a LUN */
1752                 case 3: /* No-Op message */
1753                         c->Request.CDBLen = 1;
1754                         c->Request.Type.Attribute = ATTR_SIMPLE;
1755                         c->Request.Type.Direction = XFER_WRITE;
1756                         c->Request.Timeout = 0;
1757                         c->Request.CDB[0] = cmd;
1758                         break;
1759                 default:
1760                         printk(KERN_WARNING
1761                                "cciss%d: unknown message type %d\n", ctlr, cmd);
1762                         return IO_ERROR;
1763                 }
1764         } else {
1765                 printk(KERN_WARNING
1766                        "cciss%d: unknown command type %d\n", ctlr, cmd_type);
1767                 return IO_ERROR;
1768         }
1769         /* Fill in the scatter gather information */
1770         if (size > 0) {
1771                 buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
1772                                                              buff, size,
1773                                                              PCI_DMA_BIDIRECTIONAL);
1774                 c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
1775                 c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
1776                 c->SG[0].Len = size;
1777                 c->SG[0].Ext = 0;       /* we are not chaining */
1778         }
1779         return status;
1780 }
1781
1782 static int sendcmd_withirq(__u8 cmd,
1783                            int ctlr,
1784                            void *buff,
1785                            size_t size,
1786                            unsigned int use_unit_num,
1787                            unsigned int log_unit, __u8 page_code, int cmd_type)
1788 {
1789         ctlr_info_t *h = hba[ctlr];
1790         CommandList_struct *c;
1791         u64bit buff_dma_handle;
1792         unsigned long flags;
1793         int return_status;
1794         DECLARE_COMPLETION(wait);
1795
1796         if ((c = cmd_alloc(h, 0)) == NULL)
1797                 return -ENOMEM;
1798         return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
1799                                  log_unit, page_code, NULL, cmd_type);
1800         if (return_status != IO_OK) {
1801                 cmd_free(h, c, 0);
1802                 return return_status;
1803         }
1804       resend_cmd2:
1805         c->waiting = &wait;
1806
1807         /* Put the request on the tail of the queue and send it */
1808         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1809         addQ(&h->reqQ, c);
1810         h->Qdepth++;
1811         start_io(h);
1812         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1813
1814         wait_for_completion(&wait);
1815
1816         if (c->err_info->CommandStatus != 0) {  /* an error has occurred */
1817                 switch (c->err_info->CommandStatus) {
1818                 case CMD_TARGET_STATUS:
1819                         printk(KERN_WARNING "cciss: cmd %p has "
1820                                " completed with errors\n", c);
1821                         if (c->err_info->ScsiStatus) {
1822                                 printk(KERN_WARNING "cciss: cmd %p "
1823                                        "has SCSI Status = %x\n",
1824                                        c, c->err_info->ScsiStatus);
1825                         }
1826
1827                         break;
1828                 case CMD_DATA_UNDERRUN:
1829                 case CMD_DATA_OVERRUN:
1830                         /* expected for inquire and report lun commands */
1831                         break;
1832                 case CMD_INVALID:
1833                         printk(KERN_WARNING "cciss: Cmd %p is "
1834                                "reported invalid\n", c);
1835                         return_status = IO_ERROR;
1836                         break;
1837                 case CMD_PROTOCOL_ERR:
1838                         printk(KERN_WARNING "cciss: cmd %p has "
1839                                "protocol error \n", c);
1840                         return_status = IO_ERROR;
1841                         break;
1842                 case CMD_HARDWARE_ERR:
1843                         printk(KERN_WARNING "cciss: cmd %p had "
1844                                " hardware error\n", c);
1845                         return_status = IO_ERROR;
1846                         break;
1847                 case CMD_CONNECTION_LOST:
1848                         printk(KERN_WARNING "cciss: cmd %p had "
1849                                "connection lost\n", c);
1850                         return_status = IO_ERROR;
1851                         break;
1852                 case CMD_ABORTED:
1853                         printk(KERN_WARNING "cciss: cmd %p was "
1854                                "aborted\n", c);
1855                         return_status = IO_ERROR;
1856                         break;
1857                 case CMD_ABORT_FAILED:
1858                         printk(KERN_WARNING "cciss: cmd %p reports "
1859                                "abort failed\n", c);
1860                         return_status = IO_ERROR;
1861                         break;
1862                 case CMD_UNSOLICITED_ABORT:
1863                         printk(KERN_WARNING
1864                                "cciss%d: unsolicited abort %p\n", ctlr, c);
1865                         if (c->retry_count < MAX_CMD_RETRIES) {
1866                                 printk(KERN_WARNING
1867                                        "cciss%d: retrying %p\n", ctlr, c);
1868                                 c->retry_count++;
1869                                 /* erase the old error information */
1870                                 memset(c->err_info, 0,
1871                                        sizeof(ErrorInfo_struct));
1872                                 return_status = IO_OK;
1873                                 INIT_COMPLETION(wait);
1874                                 goto resend_cmd2;
1875                         }
1876                         return_status = IO_ERROR;
1877                         break;
1878                 default:
1879                         printk(KERN_WARNING "cciss: cmd %p returned "
1880                                "unknown status %x\n", c,
1881                                c->err_info->CommandStatus);
1882                         return_status = IO_ERROR;
1883                 }
1884         }
1885         /* unlock the buffers from DMA */
1886         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
1887         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
1888         pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
1889                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
1890         cmd_free(h, c, 0);
1891         return return_status;
1892 }
1893
1894 static void cciss_geometry_inquiry(int ctlr, int logvol,
1895                                    int withirq, unsigned int total_size,
1896                                    unsigned int block_size,
1897                                    InquiryData_struct *inq_buff,
1898                                    drive_info_struct *drv)
1899 {
1900         int return_code;
1901         memset(inq_buff, 0, sizeof(InquiryData_struct));
1902         if (withirq)
1903                 return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
1904                                               inq_buff, sizeof(*inq_buff), 1,
1905                                               logvol, 0xC1, TYPE_CMD);
1906         else
1907                 return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
1908                                       sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
1909                                       TYPE_CMD);
1910         if (return_code == IO_OK) {
1911                 if (inq_buff->data_byte[8] == 0xFF) {
1912                         printk(KERN_WARNING
1913                                "cciss: reading geometry failed, volume "
1914                                "does not support reading geometry\n");
1915                         drv->block_size = block_size;
1916                         drv->nr_blocks = total_size;
1917                         drv->heads = 255;
1918                         drv->sectors = 32;      // Sectors per track
1919                         drv->cylinders = total_size / 255 / 32;
1920                 } else {
1921                         unsigned int t;
1922
1923                         drv->block_size = block_size;
1924                         drv->nr_blocks = total_size;
1925                         drv->heads = inq_buff->data_byte[6];
1926                         drv->sectors = inq_buff->data_byte[7];
1927                         drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
1928                         drv->cylinders += inq_buff->data_byte[5];
1929                         drv->raid_level = inq_buff->data_byte[8];
1930                         t = drv->heads * drv->sectors;
1931                         if (t > 1) {
1932                                 drv->cylinders = total_size / t;
1933                         }
1934                 }
1935         } else {                /* Get geometry failed */
1936                 printk(KERN_WARNING "cciss: reading geometry failed\n");
1937         }
1938         printk(KERN_INFO "      heads= %d, sectors= %d, cylinders= %d\n\n",
1939                drv->heads, drv->sectors, drv->cylinders);
1940 }
1941
1942 static void
1943 cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
1944                     int withirq, unsigned int *total_size,
1945                     unsigned int *block_size)
1946 {
1947         int return_code;
1948         memset(buf, 0, sizeof(*buf));
1949         if (withirq)
1950                 return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
1951                                               ctlr, buf, sizeof(*buf), 1,
1952                                               logvol, 0, TYPE_CMD);
1953         else
1954                 return_code = sendcmd(CCISS_READ_CAPACITY,
1955                                       ctlr, buf, sizeof(*buf), 1, logvol, 0,
1956                                       NULL, TYPE_CMD);
1957         if (return_code == IO_OK) {
1958                 *total_size =
1959                     be32_to_cpu(*((__be32 *) & buf->total_size[0])) + 1;
1960                 *block_size = be32_to_cpu(*((__be32 *) & buf->block_size[0]));
1961         } else {                /* read capacity command failed */
1962                 printk(KERN_WARNING "cciss: read capacity failed\n");
1963                 *total_size = 0;
1964                 *block_size = BLOCK_SIZE;
1965         }
1966         printk(KERN_INFO "      blocks= %u block_size= %d\n",
1967                *total_size, *block_size);
1968         return;
1969 }
1970
1971 static int cciss_revalidate(struct gendisk *disk)
1972 {
1973         ctlr_info_t *h = get_host(disk);
1974         drive_info_struct *drv = get_drv(disk);
1975         int logvol;
1976         int FOUND = 0;
1977         unsigned int block_size;
1978         unsigned int total_size;
1979         ReadCapdata_struct *size_buff = NULL;
1980         InquiryData_struct *inq_buff = NULL;
1981
1982         for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
1983                 if (h->drv[logvol].LunID == drv->LunID) {
1984                         FOUND = 1;
1985                         break;
1986                 }
1987         }
1988
1989         if (!FOUND)
1990                 return 1;
1991
1992         size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
1993         if (size_buff == NULL) {
1994                 printk(KERN_WARNING "cciss: out of memory\n");
1995                 return 1;
1996         }
1997         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1998         if (inq_buff == NULL) {
1999                 printk(KERN_WARNING "cciss: out of memory\n");
2000                 kfree(size_buff);
2001                 return 1;
2002         }
2003
2004         cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size,
2005                             &block_size);
2006         cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
2007                                inq_buff, drv);
2008
2009         blk_queue_hardsect_size(drv->queue, drv->block_size);
2010         set_capacity(disk, drv->nr_blocks);
2011
2012         kfree(size_buff);
2013         kfree(inq_buff);
2014         return 0;
2015 }
2016
2017 /*
2018  *   Wait polling for a command to complete.
2019  *   The memory mapped FIFO is polled for the completion.
2020  *   Used only at init time, interrupts from the HBA are disabled.
2021  */
2022 static unsigned long pollcomplete(int ctlr)
2023 {
2024         unsigned long done;
2025         int i;
2026
2027         /* Wait (up to 20 seconds) for a command to complete */
2028
2029         for (i = 20 * HZ; i > 0; i--) {
2030                 done = hba[ctlr]->access.command_completed(hba[ctlr]);
2031                 if (done == FIFO_EMPTY)
2032                         schedule_timeout_uninterruptible(1);
2033                 else
2034                         return done;
2035         }
2036         /* Invalid address to tell caller we ran out of time */
2037         return 1;
2038 }
2039
2040 static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
2041 {
2042         /* We get in here if sendcmd() is polling for completions
2043            and gets some command back that it wasn't expecting --
2044            something other than that which it just sent down.
2045            Ordinarily, that shouldn't happen, but it can happen when
2046            the scsi tape stuff gets into error handling mode, and
2047            starts using sendcmd() to try to abort commands and
2048            reset tape drives.  In that case, sendcmd may pick up
2049            completions of commands that were sent to logical drives
2050            through the block i/o system, or cciss ioctls completing, etc.
2051            In that case, we need to save those completions for later
2052            processing by the interrupt handler.
2053          */
2054
2055 #ifdef CONFIG_CISS_SCSI_TAPE
2056         struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
2057
2058         /* If it's not the scsi tape stuff doing error handling, (abort */
2059         /* or reset) then we don't expect anything weird. */
2060         if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
2061 #endif
2062                 printk(KERN_WARNING "cciss cciss%d: SendCmd "
2063                        "Invalid command list address returned! (%lx)\n",
2064                        ctlr, complete);
2065                 /* not much we can do. */
2066 #ifdef CONFIG_CISS_SCSI_TAPE
2067                 return 1;
2068         }
2069
2070         /* We've sent down an abort or reset, but something else
2071            has completed */
2072         if (srl->ncompletions >= (NR_CMDS + 2)) {
2073                 /* Uh oh.  No room to save it for later... */
2074                 printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
2075                        "reject list overflow, command lost!\n", ctlr);
2076                 return 1;
2077         }
2078         /* Save it for later */
2079         srl->complete[srl->ncompletions] = complete;
2080         srl->ncompletions++;
2081 #endif
2082         return 0;
2083 }
2084
2085 /*
2086  * Send a command to the controller, and wait for it to complete.
2087  * Only used at init time.
2088  */
2089 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
2090                                                                                                    1: address logical volume log_unit,
2091                                                                                                    2: periph device address is scsi3addr */
2092                    unsigned int log_unit,
2093                    __u8 page_code, unsigned char *scsi3addr, int cmd_type)
2094 {
2095         CommandList_struct *c;
2096         int i;
2097         unsigned long complete;
2098         ctlr_info_t *info_p = hba[ctlr];
2099         u64bit buff_dma_handle;
2100         int status, done = 0;
2101
2102         if ((c = cmd_alloc(info_p, 1)) == NULL) {
2103                 printk(KERN_WARNING "cciss: unable to get memory");
2104                 return IO_ERROR;
2105         }
2106         status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
2107                           log_unit, page_code, scsi3addr, cmd_type);
2108         if (status != IO_OK) {
2109                 cmd_free(info_p, c, 1);
2110                 return status;
2111         }
2112       resend_cmd1:
2113         /*
2114          * Disable interrupt
2115          */
2116 #ifdef CCISS_DEBUG
2117         printk(KERN_DEBUG "cciss: turning intr off\n");
2118 #endif                          /* CCISS_DEBUG */
2119         info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
2120
2121         /* Make sure there is room in the command FIFO */
2122         /* Actually it should be completely empty at this time */
2123         /* unless we are in here doing error handling for the scsi */
2124         /* tape side of the driver. */
2125         for (i = 200000; i > 0; i--) {
2126                 /* if fifo isn't full go */
2127                 if (!(info_p->access.fifo_full(info_p))) {
2128
2129                         break;
2130                 }
2131                 udelay(10);
2132                 printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
2133                        " waiting!\n", ctlr);
2134         }
2135         /*
2136          * Send the cmd
2137          */
2138         info_p->access.submit_command(info_p, c);
2139         done = 0;
2140         do {
2141                 complete = pollcomplete(ctlr);
2142
2143 #ifdef CCISS_DEBUG
2144                 printk(KERN_DEBUG "cciss: command completed\n");
2145 #endif                          /* CCISS_DEBUG */
2146
2147                 if (complete == 1) {
2148                         printk(KERN_WARNING
2149                                "cciss cciss%d: SendCmd Timeout out, "
2150                                "No command list address returned!\n", ctlr);
2151                         status = IO_ERROR;
2152                         done = 1;
2153                         break;
2154                 }
2155
2156                 /* This will need to change for direct lookup completions */
2157                 if ((complete & CISS_ERROR_BIT)
2158                     && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
2159                         /* if data overrun or underun on Report command
2160                            ignore it
2161                          */
2162                         if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
2163                              (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
2164                              (c->Request.CDB[0] == CISS_INQUIRY)) &&
2165                             ((c->err_info->CommandStatus ==
2166                               CMD_DATA_OVERRUN) ||
2167                              (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
2168                             )) {
2169                                 complete = c->busaddr;
2170                         } else {
2171                                 if (c->err_info->CommandStatus ==
2172                                     CMD_UNSOLICITED_ABORT) {
2173                                         printk(KERN_WARNING "cciss%d: "
2174                                                "unsolicited abort %p\n",
2175                                                ctlr, c);
2176                                         if (c->retry_count < MAX_CMD_RETRIES) {
2177                                                 printk(KERN_WARNING
2178                                                        "cciss%d: retrying %p\n",
2179                                                        ctlr, c);
2180                                                 c->retry_count++;
2181                                                 /* erase the old error */
2182                                                 /* information */
2183                                                 memset(c->err_info, 0,
2184                                                        sizeof
2185                                                        (ErrorInfo_struct));
2186                                                 goto resend_cmd1;
2187                                         } else {
2188                                                 printk(KERN_WARNING
2189                                                        "cciss%d: retried %p too "
2190                                                        "many times\n", ctlr, c);
2191                                                 status = IO_ERROR;
2192                                                 goto cleanup1;
2193                                         }
2194                                 } else if (c->err_info->CommandStatus ==
2195                                            CMD_UNABORTABLE) {
2196                                         printk(KERN_WARNING
2197                                                "cciss%d: command could not be aborted.\n",
2198                                                ctlr);
2199                                         status = IO_ERROR;
2200                                         goto cleanup1;
2201                                 }
2202                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2203                                        " Error %x \n", ctlr,
2204                                        c->err_info->CommandStatus);
2205                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2206                                        " offensive info\n"
2207                                        "  size %x\n   num %x   value %x\n",
2208                                        ctlr,
2209                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2210                                        offense_size,
2211                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2212                                        offense_num,
2213                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2214                                        offense_value);
2215                                 status = IO_ERROR;
2216                                 goto cleanup1;
2217                         }
2218                 }
2219                 /* This will need changing for direct lookup completions */
2220                 if (complete != c->busaddr) {
2221                         if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
2222                                 BUG();  /* we are pretty much hosed if we get here. */
2223                         }
2224                         continue;
2225                 } else
2226                         done = 1;
2227         } while (!done);
2228
2229       cleanup1:
2230         /* unlock the data buffer from DMA */
2231         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
2232         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
2233         pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
2234                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
2235 #ifdef CONFIG_CISS_SCSI_TAPE
2236         /* if we saved some commands for later, process them now. */
2237         if (info_p->scsi_rejects.ncompletions > 0)
2238                 do_cciss_intr(0, info_p, NULL);
2239 #endif
2240         cmd_free(info_p, c, 1);
2241         return status;
2242 }
2243
2244 /*
2245  * Map (physical) PCI mem into (virtual) kernel space
2246  */
2247 static void __iomem *remap_pci_mem(ulong base, ulong size)
2248 {
2249         ulong page_base = ((ulong) base) & PAGE_MASK;
2250         ulong page_offs = ((ulong) base) - page_base;
2251         void __iomem *page_remapped = ioremap(page_base, page_offs + size);
2252
2253         return page_remapped ? (page_remapped + page_offs) : NULL;
2254 }
2255
2256 /*
2257  * Takes jobs of the Q and sends them to the hardware, then puts it on
2258  * the Q to wait for completion.
2259  */
2260 static void start_io(ctlr_info_t *h)
2261 {
2262         CommandList_struct *c;
2263
2264         while ((c = h->reqQ) != NULL) {
2265                 /* can't do anything if fifo is full */
2266                 if ((h->access.fifo_full(h))) {
2267                         printk(KERN_WARNING "cciss: fifo full\n");
2268                         break;
2269                 }
2270
2271                 /* Get the first entry from the Request Q */
2272                 removeQ(&(h->reqQ), c);
2273                 h->Qdepth--;
2274
2275                 /* Tell the controller execute command */
2276                 h->access.submit_command(h, c);
2277
2278                 /* Put job onto the completed Q */
2279                 addQ(&(h->cmpQ), c);
2280         }
2281 }
2282
2283 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2284 /* Zeros out the error record and then resends the command back */
2285 /* to the controller */
2286 static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
2287 {
2288         /* erase the old error information */
2289         memset(c->err_info, 0, sizeof(ErrorInfo_struct));
2290
2291         /* add it to software queue and then send it to the controller */
2292         addQ(&(h->reqQ), c);
2293         h->Qdepth++;
2294         if (h->Qdepth > h->maxQsinceinit)
2295                 h->maxQsinceinit = h->Qdepth;
2296
2297         start_io(h);
2298 }
2299
2300 /* checks the status of the job and calls complete buffers to mark all
2301  * buffers for the completed job. Note that this function does not need
2302  * to hold the hba/queue lock.
2303  */
2304 static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
2305                                     int timeout)
2306 {
2307         int status = 1;
2308         int retry_cmd = 0;
2309
2310         if (timeout)
2311                 status = 0;
2312
2313         if (cmd->err_info->CommandStatus != 0) {        /* an error has occurred */
2314                 switch (cmd->err_info->CommandStatus) {
2315                         unsigned char sense_key;
2316                 case CMD_TARGET_STATUS:
2317                         status = 0;
2318
2319                         if (cmd->err_info->ScsiStatus == 0x02) {
2320                                 printk(KERN_WARNING "cciss: cmd %p "
2321                                        "has CHECK CONDITION "
2322                                        " byte 2 = 0x%x\n", cmd,
2323                                        cmd->err_info->SenseInfo[2]
2324                                     );
2325                                 /* check the sense key */
2326                                 sense_key = 0xf & cmd->err_info->SenseInfo[2];
2327                                 /* no status or recovered error */
2328                                 if ((sense_key == 0x0) || (sense_key == 0x1)) {
2329                                         status = 1;
2330                                 }
2331                         } else {
2332                                 printk(KERN_WARNING "cciss: cmd %p "
2333                                        "has SCSI Status 0x%x\n",
2334                                        cmd, cmd->err_info->ScsiStatus);
2335                         }
2336                         break;
2337                 case CMD_DATA_UNDERRUN:
2338                         printk(KERN_WARNING "cciss: cmd %p has"
2339                                " completed with data underrun "
2340                                "reported\n", cmd);
2341                         break;
2342                 case CMD_DATA_OVERRUN:
2343                         printk(KERN_WARNING "cciss: cmd %p has"
2344                                " completed with data overrun "
2345                                "reported\n", cmd);
2346                         break;
2347                 case CMD_INVALID:
2348                         printk(KERN_WARNING "cciss: cmd %p is "
2349                                "reported invalid\n", cmd);
2350                         status = 0;
2351                         break;
2352                 case CMD_PROTOCOL_ERR:
2353                         printk(KERN_WARNING "cciss: cmd %p has "
2354                                "protocol error \n", cmd);
2355                         status = 0;
2356                         break;
2357                 case CMD_HARDWARE_ERR:
2358                         printk(KERN_WARNING "cciss: cmd %p had "
2359                                " hardware error\n", cmd);
2360                         status = 0;
2361                         break;
2362                 case CMD_CONNECTION_LOST:
2363                         printk(KERN_WARNING "cciss: cmd %p had "
2364                                "connection lost\n", cmd);
2365                         status = 0;
2366                         break;
2367                 case CMD_ABORTED:
2368                         printk(KERN_WARNING "cciss: cmd %p was "
2369                                "aborted\n", cmd);
2370                         status = 0;
2371                         break;
2372                 case CMD_ABORT_FAILED:
2373                         printk(KERN_WARNING "cciss: cmd %p reports "
2374                                "abort failed\n", cmd);
2375                         status = 0;
2376                         break;
2377                 case CMD_UNSOLICITED_ABORT:
2378                         printk(KERN_WARNING "cciss%d: unsolicited "
2379                                "abort %p\n", h->ctlr, cmd);
2380                         if (cmd->retry_count < MAX_CMD_RETRIES) {
2381                                 retry_cmd = 1;
2382                                 printk(KERN_WARNING
2383                                        "cciss%d: retrying %p\n", h->ctlr, cmd);
2384                                 cmd->retry_count++;
2385                         } else
2386                                 printk(KERN_WARNING
2387                                        "cciss%d: %p retried too "
2388                                        "many times\n", h->ctlr, cmd);
2389                         status = 0;
2390                         break;
2391                 case CMD_TIMEOUT:
2392                         printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
2393                         status = 0;
2394                         break;
2395                 default:
2396                         printk(KERN_WARNING "cciss: cmd %p returned "
2397                                "unknown status %x\n", cmd,
2398                                cmd->err_info->CommandStatus);
2399                         status = 0;
2400                 }
2401         }
2402         /* We need to return this command */
2403         if (retry_cmd) {
2404                 resend_cciss_cmd(h, cmd);
2405                 return;
2406         }
2407
2408         cmd->rq->completion_data = cmd;
2409         cmd->rq->errors = status;
2410         blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
2411         blk_complete_request(cmd->rq);
2412 }
2413
2414 /*
2415  * Get a request and submit it to the controller.
2416  */
2417 static void do_cciss_request(request_queue_t *q)
2418 {
2419         ctlr_info_t *h = q->queuedata;
2420         CommandList_struct *c;
2421         int start_blk, seg;
2422         struct request *creq;
2423         u64bit temp64;
2424         struct scatterlist tmp_sg[MAXSGENTRIES];
2425         drive_info_struct *drv;
2426         int i, dir;
2427
2428         /* We call start_io here in case there is a command waiting on the
2429          * queue that has not been sent.
2430          */
2431         if (blk_queue_plugged(q))
2432                 goto startio;
2433
2434       queue:
2435         creq = elv_next_request(q);
2436         if (!creq)
2437                 goto startio;
2438
2439         BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
2440
2441         if ((c = cmd_alloc(h, 1)) == NULL)
2442                 goto full;
2443
2444         blkdev_dequeue_request(creq);
2445
2446         spin_unlock_irq(q->queue_lock);
2447
2448         c->cmd_type = CMD_RWREQ;
2449         c->rq = creq;
2450
2451         /* fill in the request */
2452         drv = creq->rq_disk->private_data;
2453         c->Header.ReplyQueue = 0;       // unused in simple mode
2454         /* got command from pool, so use the command block index instead */
2455         /* for direct lookups. */
2456         /* The first 2 bits are reserved for controller error reporting. */
2457         c->Header.Tag.lower = (c->cmdindex << 3);
2458         c->Header.Tag.lower |= 0x04;    /* flag for direct lookup. */
2459         c->Header.LUN.LogDev.VolId = drv->LunID;
2460         c->Header.LUN.LogDev.Mode = 1;
2461         c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
2462         c->Request.Type.Type = TYPE_CMD;        // It is a command.
2463         c->Request.Type.Attribute = ATTR_SIMPLE;
2464         c->Request.Type.Direction =
2465             (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
2466         c->Request.Timeout = 0; // Don't time out
2467         c->Request.CDB[0] =
2468             (rq_data_dir(creq) == READ) ? CCISS_READ : CCISS_WRITE;
2469         start_blk = creq->sector;
2470 #ifdef CCISS_DEBUG
2471         printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
2472                (int)creq->nr_sectors);
2473 #endif                          /* CCISS_DEBUG */
2474
2475         seg = blk_rq_map_sg(q, creq, tmp_sg);
2476
2477         /* get the DMA records for the setup */
2478         if (c->Request.Type.Direction == XFER_READ)
2479                 dir = PCI_DMA_FROMDEVICE;
2480         else
2481                 dir = PCI_DMA_TODEVICE;
2482
2483         for (i = 0; i < seg; i++) {
2484                 c->SG[i].Len = tmp_sg[i].length;
2485                 temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
2486                                                   tmp_sg[i].offset,
2487                                                   tmp_sg[i].length, dir);
2488                 c->SG[i].Addr.lower = temp64.val32.lower;
2489                 c->SG[i].Addr.upper = temp64.val32.upper;
2490                 c->SG[i].Ext = 0;       // we are not chaining
2491         }
2492         /* track how many SG entries we are using */
2493         if (seg > h->maxSG)
2494                 h->maxSG = seg;
2495
2496 #ifdef CCISS_DEBUG
2497         printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
2498                creq->nr_sectors, seg);
2499 #endif                          /* CCISS_DEBUG */
2500
2501         c->Header.SGList = c->Header.SGTotal = seg;
2502         c->Request.CDB[1] = 0;
2503         c->Request.CDB[2] = (start_blk >> 24) & 0xff;   //MSB
2504         c->Request.CDB[3] = (start_blk >> 16) & 0xff;
2505         c->Request.CDB[4] = (start_blk >> 8) & 0xff;
2506         c->Request.CDB[5] = start_blk & 0xff;
2507         c->Request.CDB[6] = 0;  // (sect >> 24) & 0xff; MSB
2508         c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
2509         c->Request.CDB[8] = creq->nr_sectors & 0xff;
2510         c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
2511
2512         spin_lock_irq(q->queue_lock);
2513
2514         addQ(&(h->reqQ), c);
2515         h->Qdepth++;
2516         if (h->Qdepth > h->maxQsinceinit)
2517                 h->maxQsinceinit = h->Qdepth;
2518
2519         goto queue;
2520       full:
2521         blk_stop_queue(q);
2522       startio:
2523         /* We will already have the driver lock here so not need
2524          * to lock it.
2525          */
2526         start_io(h);
2527 }
2528
2529 static inline unsigned long get_next_completion(ctlr_info_t *h)
2530 {
2531 #ifdef CONFIG_CISS_SCSI_TAPE
2532         /* Any rejects from sendcmd() lying around? Process them first */
2533         if (h->scsi_rejects.ncompletions == 0)
2534                 return h->access.command_completed(h);
2535         else {
2536                 struct sendcmd_reject_list *srl;
2537                 int n;
2538                 srl = &h->scsi_rejects;
2539                 n = --srl->ncompletions;
2540                 /* printk("cciss%d: processing saved reject\n", h->ctlr); */
2541                 printk("p");
2542                 return srl->complete[n];
2543         }
2544 #else
2545         return h->access.command_completed(h);
2546 #endif
2547 }
2548
2549 static inline int interrupt_pending(ctlr_info_t *h)
2550 {
2551 #ifdef CONFIG_CISS_SCSI_TAPE
2552         return (h->access.intr_pending(h)
2553                 || (h->scsi_rejects.ncompletions > 0));
2554 #else
2555         return h->access.intr_pending(h);
2556 #endif
2557 }
2558
2559 static inline long interrupt_not_for_us(ctlr_info_t *h)
2560 {
2561 #ifdef CONFIG_CISS_SCSI_TAPE
2562         return (((h->access.intr_pending(h) == 0) ||
2563                  (h->interrupts_enabled == 0))
2564                 && (h->scsi_rejects.ncompletions == 0));
2565 #else
2566         return (((h->access.intr_pending(h) == 0) ||
2567                  (h->interrupts_enabled == 0)));
2568 #endif
2569 }
2570
2571 static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
2572 {
2573         ctlr_info_t *h = dev_id;
2574         CommandList_struct *c;
2575         unsigned long flags;
2576         __u32 a, a1, a2;
2577
2578         if (interrupt_not_for_us(h))
2579                 return IRQ_NONE;
2580         /*
2581          * If there are completed commands in the completion queue,
2582          * we had better do something about it.
2583          */
2584         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
2585         while (interrupt_pending(h)) {
2586                 while ((a = get_next_completion(h)) != FIFO_EMPTY) {
2587                         a1 = a;
2588                         if ((a & 0x04)) {
2589                                 a2 = (a >> 3);
2590                                 if (a2 >= NR_CMDS) {
2591                                         printk(KERN_WARNING
2592                                                "cciss: controller cciss%d failed, stopping.\n",
2593                                                h->ctlr);
2594                                         fail_all_cmds(h->ctlr);
2595                                         return IRQ_HANDLED;
2596                                 }
2597
2598                                 c = h->cmd_pool + a2;
2599                                 a = c->busaddr;
2600
2601                         } else {
2602                                 a &= ~3;
2603                                 if ((c = h->cmpQ) == NULL) {
2604                                         printk(KERN_WARNING
2605                                                "cciss: Completion of %08x ignored\n",
2606                                                a1);
2607                                         continue;
2608                                 }
2609                                 while (c->busaddr != a) {
2610                                         c = c->next;
2611                                         if (c == h->cmpQ)
2612                                                 break;
2613                                 }
2614                         }
2615                         /*
2616                          * If we've found the command, take it off the
2617                          * completion Q and free it
2618                          */
2619                         if (c->busaddr == a) {
2620                                 removeQ(&h->cmpQ, c);
2621                                 if (c->cmd_type == CMD_RWREQ) {
2622                                         complete_command(h, c, 0);
2623                                 } else if (c->cmd_type == CMD_IOCTL_PEND) {
2624                                         complete(c->waiting);
2625                                 }
2626 #                               ifdef CONFIG_CISS_SCSI_TAPE
2627                                 else if (c->cmd_type == CMD_SCSI)
2628                                         complete_scsi_command(c, 0, a1);
2629 #                               endif
2630                                 continue;
2631                         }
2632                 }
2633         }
2634
2635         spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
2636         return IRQ_HANDLED;
2637 }
2638
2639 /*
2640  *  We cannot read the structure directly, for portability we must use
2641  *   the io functions.
2642  *   This is for debug only.
2643  */
2644 #ifdef CCISS_DEBUG
2645 static void print_cfg_table(CfgTable_struct *tb)
2646 {
2647         int i;
2648         char temp_name[17];
2649
2650         printk("Controller Configuration information\n");
2651         printk("------------------------------------\n");
2652         for (i = 0; i < 4; i++)
2653                 temp_name[i] = readb(&(tb->Signature[i]));
2654         temp_name[4] = '\0';
2655         printk("   Signature = %s\n", temp_name);
2656         printk("   Spec Number = %d\n", readl(&(tb->SpecValence)));
2657         printk("   Transport methods supported = 0x%x\n",
2658                readl(&(tb->TransportSupport)));
2659         printk("   Transport methods active = 0x%x\n",
2660                readl(&(tb->TransportActive)));
2661         printk("   Requested transport Method = 0x%x\n",
2662                readl(&(tb->HostWrite.TransportRequest)));
2663         printk("   Coalesce Interrupt Delay = 0x%x\n",
2664                readl(&(tb->HostWrite.CoalIntDelay)));
2665         printk("   Coalesce Interrupt Count = 0x%x\n",
2666                readl(&(tb->HostWrite.CoalIntCount)));
2667         printk("   Max outstanding commands = 0x%d\n",
2668                readl(&(tb->CmdsOutMax)));
2669         printk("   Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
2670         for (i = 0; i < 16; i++)
2671                 temp_name[i] = readb(&(tb->ServerName[i]));
2672         temp_name[16] = '\0';
2673         printk("   Server Name = %s\n", temp_name);
2674         printk("   Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
2675 }
2676 #endif                          /* CCISS_DEBUG */
2677
2678 static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
2679 {
2680         int i, offset, mem_type, bar_type;
2681         if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
2682                 return 0;
2683         offset = 0;
2684         for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
2685                 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
2686                 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
2687                         offset += 4;
2688                 else {
2689                         mem_type = pci_resource_flags(pdev, i) &
2690                             PCI_BASE_ADDRESS_MEM_TYPE_MASK;
2691                         switch (mem_type) {
2692                         case PCI_BASE_ADDRESS_MEM_TYPE_32:
2693                         case PCI_BASE_ADDRESS_MEM_TYPE_1M:
2694                                 offset += 4;    /* 32 bit */
2695                                 break;
2696                         case PCI_BASE_ADDRESS_MEM_TYPE_64:
2697                                 offset += 8;
2698                                 break;
2699                         default:        /* reserved in PCI 2.2 */
2700                                 printk(KERN_WARNING
2701                                        "Base address is invalid\n");
2702                                 return -1;
2703                                 break;
2704                         }
2705                 }
2706                 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
2707                         return i + 1;
2708         }
2709         return -1;
2710 }
2711
2712 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
2713  * controllers that are capable. If not, we use IO-APIC mode.
2714  */
2715
2716 static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
2717                                            struct pci_dev *pdev, __u32 board_id)
2718 {
2719 #ifdef CONFIG_PCI_MSI
2720         int err;
2721         struct msix_entry cciss_msix_entries[4] = { {0, 0}, {0, 1},
2722         {0, 2}, {0, 3}
2723         };
2724
2725         /* Some boards advertise MSI but don't really support it */
2726         if ((board_id == 0x40700E11) ||
2727             (board_id == 0x40800E11) ||
2728             (board_id == 0x40820E11) || (board_id == 0x40830E11))
2729                 goto default_int_mode;
2730
2731         if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
2732                 err = pci_enable_msix(pdev, cciss_msix_entries, 4);
2733                 if (!err) {
2734                         c->intr[0] = cciss_msix_entries[0].vector;
2735                         c->intr[1] = cciss_msix_entries[1].vector;
2736                         c->intr[2] = cciss_msix_entries[2].vector;
2737                         c->intr[3] = cciss_msix_entries[3].vector;
2738                         c->msix_vector = 1;
2739                         return;
2740                 }
2741                 if (err > 0) {
2742                         printk(KERN_WARNING "cciss: only %d MSI-X vectors "
2743                                "available\n", err);
2744                 } else {
2745                         printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
2746                                err);
2747                 }
2748         }
2749         if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
2750                 if (!pci_enable_msi(pdev)) {
2751                         c->intr[SIMPLE_MODE_INT] = pdev->irq;
2752                         c->msi_vector = 1;
2753                         return;
2754                 } else {
2755                         printk(KERN_WARNING "cciss: MSI init failed\n");
2756                         c->intr[SIMPLE_MODE_INT] = pdev->irq;
2757                         return;
2758                 }
2759         }
2760       default_int_mode:
2761 #endif                          /* CONFIG_PCI_MSI */
2762         /* if we get here we're going to use the default interrupt mode */
2763         c->intr[SIMPLE_MODE_INT] = pdev->irq;
2764         return;
2765 }
2766
2767 static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
2768 {
2769         ushort subsystem_vendor_id, subsystem_device_id, command;
2770         __u32 board_id, scratchpad = 0;
2771         __u64 cfg_offset;
2772         __u32 cfg_base_addr;
2773         __u64 cfg_base_addr_index;
2774         int i, err;
2775
2776         /* check to see if controller has been disabled */
2777         /* BEFORE trying to enable it */
2778         (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
2779         if (!(command & 0x02)) {
2780                 printk(KERN_WARNING
2781                        "cciss: controller appears to be disabled\n");
2782                 return -ENODEV;
2783         }
2784
2785         err = pci_enable_device(pdev);
2786         if (err) {
2787                 printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
2788                 return err;
2789         }
2790
2791         err = pci_request_regions(pdev, "cciss");
2792         if (err) {
2793                 printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
2794                        "aborting\n");
2795                 goto err_out_disable_pdev;
2796         }
2797
2798         subsystem_vendor_id = pdev->subsystem_vendor;
2799         subsystem_device_id = pdev->subsystem_device;
2800         board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
2801                     subsystem_vendor_id);
2802
2803 #ifdef CCISS_DEBUG
2804         printk("command = %x\n", command);
2805         printk("irq = %x\n", pdev->irq);
2806         printk("board_id = %x\n", board_id);
2807 #endif                          /* CCISS_DEBUG */
2808
2809 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
2810  * else we use the IO-APIC interrupt assigned to us by system ROM.
2811  */
2812         cciss_interrupt_mode(c, pdev, board_id);
2813
2814         /*
2815          * Memory base addr is first addr , the second points to the config
2816          *   table
2817          */
2818
2819         c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
2820 #ifdef CCISS_DEBUG
2821         printk("address 0 = %x\n", c->paddr);
2822 #endif                          /* CCISS_DEBUG */
2823         c->vaddr = remap_pci_mem(c->paddr, 200);
2824
2825         /* Wait for the board to become ready.  (PCI hotplug needs this.)
2826          * We poll for up to 120 secs, once per 100ms. */
2827         for (i = 0; i < 1200; i++) {
2828                 scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
2829                 if (scratchpad == CCISS_FIRMWARE_READY)
2830                         break;
2831                 set_current_state(TASK_INTERRUPTIBLE);
2832                 schedule_timeout(HZ / 10);      /* wait 100ms */
2833         }
2834         if (scratchpad != CCISS_FIRMWARE_READY) {
2835                 printk(KERN_WARNING "cciss: Board not ready.  Timed out.\n");
2836                 err = -ENODEV;
2837                 goto err_out_free_res;
2838         }
2839
2840         /* get the address index number */
2841         cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
2842         cfg_base_addr &= (__u32) 0x0000ffff;
2843 #ifdef CCISS_DEBUG
2844         printk("cfg base address = %x\n", cfg_base_addr);
2845 #endif                          /* CCISS_DEBUG */
2846         cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
2847 #ifdef CCISS_DEBUG
2848         printk("cfg base address index = %x\n", cfg_base_addr_index);
2849 #endif                          /* CCISS_DEBUG */
2850         if (cfg_base_addr_index == -1) {
2851                 printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
2852                 err = -ENODEV;
2853                 goto err_out_free_res;
2854         }
2855
2856         cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
2857 #ifdef CCISS_DEBUG
2858         printk("cfg offset = %x\n", cfg_offset);
2859 #endif                          /* CCISS_DEBUG */
2860         c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
2861                                                        cfg_base_addr_index) +
2862                                     cfg_offset, sizeof(CfgTable_struct));
2863         c->board_id = board_id;
2864
2865 #ifdef CCISS_DEBUG
2866         print_cfg_table(c->cfgtable);
2867 #endif                          /* CCISS_DEBUG */
2868
2869         for (i = 0; i < ARRAY_SIZE(products); i++) {
2870                 if (board_id == products[i].board_id) {
2871                         c->product_name = products[i].product_name;
2872                         c->access = *(products[i].access);
2873                         break;
2874                 }
2875         }
2876         if (i == ARRAY_SIZE(products)) {
2877                 printk(KERN_WARNING "cciss: Sorry, I don't know how"
2878                        " to access the Smart Array controller %08lx\n",
2879                        (unsigned long)board_id);
2880                 err = -ENODEV;
2881                 goto err_out_free_res;
2882         }
2883         if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
2884             (readb(&c->cfgtable->Signature[1]) != 'I') ||
2885             (readb(&c->cfgtable->Signature[2]) != 'S') ||
2886             (readb(&c->cfgtable->Signature[3]) != 'S')) {
2887                 printk("Does not appear to be a valid CISS config table\n");
2888                 err = -ENODEV;
2889                 goto err_out_free_res;
2890         }
2891 #ifdef CONFIG_X86
2892         {
2893                 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
2894                 __u32 prefetch;
2895                 prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
2896                 prefetch |= 0x100;
2897                 writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
2898         }
2899 #endif
2900
2901 #ifdef CCISS_DEBUG
2902         printk("Trying to put board into Simple mode\n");
2903 #endif                          /* CCISS_DEBUG */
2904         c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
2905         /* Update the field, and then ring the doorbell */
2906         writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
2907         writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
2908
2909         /* under certain very rare conditions, this can take awhile.
2910          * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
2911          * as we enter this code.) */
2912         for (i = 0; i < MAX_CONFIG_WAIT; i++) {
2913                 if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
2914                         break;
2915                 /* delay and try again */
2916                 set_current_state(TASK_INTERRUPTIBLE);
2917                 schedule_timeout(10);
2918         }
2919
2920 #ifdef CCISS_DEBUG
2921         printk(KERN_DEBUG "I counter got to %d %x\n", i,
2922                readl(c->vaddr + SA5_DOORBELL));
2923 #endif                          /* CCISS_DEBUG */
2924 #ifdef CCISS_DEBUG
2925         print_cfg_table(c->cfgtable);
2926 #endif                          /* CCISS_DEBUG */
2927
2928         if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
2929                 printk(KERN_WARNING "cciss: unable to get board into"
2930                        " simple mode\n");
2931                 err = -ENODEV;
2932                 goto err_out_free_res;
2933         }
2934         return 0;
2935
2936       err_out_free_res:
2937         pci_release_regions(pdev);
2938
2939       err_out_disable_pdev:
2940         pci_disable_device(pdev);
2941         return err;
2942 }
2943
2944 /*
2945  * Gets information about the local volumes attached to the controller.
2946  */
2947 static void cciss_getgeometry(int cntl_num)
2948 {
2949         ReportLunData_struct *ld_buff;
2950         ReadCapdata_struct *size_buff;
2951         InquiryData_struct *inq_buff;
2952         int return_code;
2953         int i;
2954         int listlength = 0;
2955         __u32 lunid = 0;
2956         int block_size;
2957         int total_size;
2958
2959         ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
2960         if (ld_buff == NULL) {
2961                 printk(KERN_ERR "cciss: out of memory\n");
2962                 return;
2963         }
2964         size_buff = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
2965         if (size_buff == NULL) {
2966                 printk(KERN_ERR "cciss: out of memory\n");
2967                 kfree(ld_buff);
2968                 return;
2969         }
2970         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
2971         if (inq_buff == NULL) {
2972                 printk(KERN_ERR "cciss: out of memory\n");
2973                 kfree(ld_buff);
2974                 kfree(size_buff);
2975                 return;
2976         }
2977         /* Get the firmware version */
2978         return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
2979                               sizeof(InquiryData_struct), 0, 0, 0, NULL,
2980                               TYPE_CMD);
2981         if (return_code == IO_OK) {
2982                 hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
2983                 hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
2984                 hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
2985                 hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
2986         } else {                /* send command failed */
2987
2988                 printk(KERN_WARNING "cciss: unable to determine firmware"
2989                        " version of controller\n");
2990         }
2991         /* Get the number of logical volumes */
2992         return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
2993                               sizeof(ReportLunData_struct), 0, 0, 0, NULL,
2994                               TYPE_CMD);
2995
2996         if (return_code == IO_OK) {
2997 #ifdef CCISS_DEBUG
2998                 printk("LUN Data\n--------------------------\n");
2999 #endif                          /* CCISS_DEBUG */
3000
3001                 listlength |=
3002                     (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
3003                 listlength |=
3004                     (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
3005                 listlength |=
3006                     (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
3007                 listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
3008         } else {                /* reading number of logical volumes failed */
3009
3010                 printk(KERN_WARNING "cciss: report logical volume"
3011                        " command failed\n");
3012                 listlength = 0;
3013         }
3014         hba[cntl_num]->num_luns = listlength / 8;       // 8 bytes pre entry
3015         if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
3016                 printk(KERN_ERR
3017                        "ciss:  only %d number of logical volumes supported\n",
3018                        CISS_MAX_LUN);
3019                 hba[cntl_num]->num_luns = CISS_MAX_LUN;
3020         }
3021 #ifdef CCISS_DEBUG
3022         printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
3023                ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
3024                ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
3025                hba[cntl_num]->num_luns);
3026 #endif                          /* CCISS_DEBUG */
3027
3028         hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
3029 //      for(i=0; i<  hba[cntl_num]->num_luns; i++)
3030         for (i = 0; i < CISS_MAX_LUN; i++) {
3031                 if (i < hba[cntl_num]->num_luns) {
3032                         lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
3033                             << 24;
3034                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
3035                             << 16;
3036                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
3037                             << 8;
3038                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
3039
3040                         hba[cntl_num]->drv[i].LunID = lunid;
3041
3042 #ifdef CCISS_DEBUG
3043                         printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i,
3044                                ld_buff->LUN[i][0], ld_buff->LUN[i][1],
3045                                ld_buff->LUN[i][2], ld_buff->LUN[i][3],
3046                                hba[cntl_num]->drv[i].LunID);
3047 #endif                          /* CCISS_DEBUG */
3048                         cciss_read_capacity(cntl_num, i, size_buff, 0,
3049                                             &total_size, &block_size);
3050                         cciss_geometry_inquiry(cntl_num, i, 0, total_size,
3051                                                block_size, inq_buff,
3052                                                &hba[cntl_num]->drv[i]);
3053                 } else {
3054                         /* initialize raid_level to indicate a free space */
3055                         hba[cntl_num]->drv[i].raid_level = -1;
3056                 }
3057         }
3058         kfree(ld_buff);
3059         kfree(size_buff);
3060         kfree(inq_buff);
3061 }
3062
3063 /* Function to find the first free pointer into our hba[] array */
3064 /* Returns -1 if no free entries are left.  */
3065 static int alloc_cciss_hba(void)
3066 {
3067         struct gendisk *disk[NWD];
3068         int i, n;
3069         for (n = 0; n < NWD; n++) {
3070                 disk[n] = alloc_disk(1 << NWD_SHIFT);
3071                 if (!disk[n])
3072                         goto out;
3073         }
3074
3075         for (i = 0; i < MAX_CTLR; i++) {
3076                 if (!hba[i]) {
3077                         ctlr_info_t *p;
3078                         p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
3079                         if (!p)
3080                                 goto Enomem;
3081                         for (n = 0; n < NWD; n++)
3082                                 p->gendisk[n] = disk[n];
3083                         hba[i] = p;
3084                         return i;
3085                 }
3086         }
3087         printk(KERN_WARNING "cciss: This driver supports a maximum"
3088                " of %d controllers.\n", MAX_CTLR);
3089         goto out;
3090       Enomem:
3091         printk(KERN_ERR "cciss: out of memory.\n");
3092       out:
3093         while (n--)
3094                 put_disk(disk[n]);
3095         return -1;
3096 }
3097
3098 static void free_hba(int i)
3099 {
3100         ctlr_info_t *p = hba[i];
3101         int n;
3102
3103         hba[i] = NULL;
3104         for (n = 0; n < NWD; n++)
3105                 put_disk(p->gendisk[n]);
3106         kfree(p);
3107 }
3108
3109 /*
3110  *  This is it.  Find all the controllers and register them.  I really hate
3111  *  stealing all these major device numbers.
3112  *  returns the number of block devices registered.
3113  */
3114 static int __devinit cciss_init_one(struct pci_dev *pdev,
3115                                     const struct pci_device_id *ent)
3116 {
3117         request_queue_t *q;
3118         int i;
3119         int j;
3120         int rc;
3121         int dac;
3122
3123         i = alloc_cciss_hba();
3124         if (i < 0)
3125                 return -1;
3126
3127         hba[i]->busy_initializing = 1;
3128
3129         if (cciss_pci_init(hba[i], pdev) != 0)
3130                 goto clean1;
3131
3132         sprintf(hba[i]->devname, "cciss%d", i);
3133         hba[i]->ctlr = i;
3134         hba[i]->pdev = pdev;
3135
3136         /* configure PCI DMA stuff */
3137         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
3138                 dac = 1;
3139         else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
3140                 dac = 0;
3141         else {
3142                 printk(KERN_ERR "cciss: no suitable DMA available\n");
3143                 goto clean1;
3144         }
3145
3146         /*
3147          * register with the major number, or get a dynamic major number
3148          * by passing 0 as argument.  This is done for greater than
3149          * 8 controller support.
3150          */
3151         if (i < MAX_CTLR_ORIG)
3152                 hba[i]->major = COMPAQ_CISS_MAJOR + i;
3153         rc = register_blkdev(hba[i]->major, hba[i]->devname);
3154         if (rc == -EBUSY || rc == -EINVAL) {
3155                 printk(KERN_ERR
3156                        "cciss:  Unable to get major number %d for %s "
3157                        "on hba %d\n", hba[i]->major, hba[i]->devname, i);
3158                 goto clean1;
3159         } else {
3160                 if (i >= MAX_CTLR_ORIG)
3161                         hba[i]->major = rc;
3162         }
3163
3164         /* make sure the board interrupts are off */
3165         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
3166         if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
3167                         IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
3168                 printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
3169                        hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
3170                 goto clean2;
3171         }
3172
3173         printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
3174                hba[i]->devname, pdev->device, pci_name(pdev),
3175                hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
3176
3177         hba[i]->cmd_pool_bits =
3178             kmalloc(((NR_CMDS + BITS_PER_LONG -
3179                       1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
3180         hba[i]->cmd_pool = (CommandList_struct *)
3181             pci_alloc_consistent(hba[i]->pdev,
3182                     NR_CMDS * sizeof(CommandList_struct),
3183                     &(hba[i]->cmd_pool_dhandle));
3184         hba[i]->errinfo_pool = (ErrorInfo_struct *)
3185             pci_alloc_consistent(hba[i]->pdev,
3186                     NR_CMDS * sizeof(ErrorInfo_struct),
3187                     &(hba[i]->errinfo_pool_dhandle));
3188         if ((hba[i]->cmd_pool_bits == NULL)
3189             || (hba[i]->cmd_pool == NULL)
3190             || (hba[i]->errinfo_pool == NULL)) {
3191                 printk(KERN_ERR "cciss: out of memory");
3192                 goto clean4;
3193         }
3194 #ifdef CONFIG_CISS_SCSI_TAPE
3195         hba[i]->scsi_rejects.complete =
3196             kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
3197                     (NR_CMDS + 5), GFP_KERNEL);
3198         if (hba[i]->scsi_rejects.complete == NULL) {
3199                 printk(KERN_ERR "cciss: out of memory");
3200                 goto clean4;
3201         }
3202 #endif
3203         spin_lock_init(&hba[i]->lock);
3204
3205         /* Initialize the pdev driver private data.
3206            have it point to hba[i].  */
3207         pci_set_drvdata(pdev, hba[i]);
3208         /* command and error info recs zeroed out before
3209            they are used */
3210         memset(hba[i]->cmd_pool_bits, 0,
3211                ((NR_CMDS + BITS_PER_LONG -
3212                  1) / BITS_PER_LONG) * sizeof(unsigned long));
3213
3214 #ifdef CCISS_DEBUG
3215         printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
3216 #endif                          /* CCISS_DEBUG */
3217
3218         cciss_getgeometry(i);
3219
3220         cciss_scsi_setup(i);
3221
3222         /* Turn the interrupts on so we can service requests */
3223         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
3224
3225         cciss_procinit(i);
3226         hba[i]->busy_initializing = 0;
3227
3228         for (j = 0; j < NWD; j++) {     /* mfm */
3229                 drive_info_struct *drv = &(hba[i]->drv[j]);
3230                 struct gendisk *disk = hba[i]->gendisk[j];
3231
3232                 q = blk_init_queue(do_cciss_request, &hba[i]->lock);
3233                 if (!q) {
3234                         printk(KERN_ERR
3235                                "cciss:  unable to allocate queue for disk %d\n",
3236                                j);
3237                         break;
3238                 }
3239                 drv->queue = q;
3240
3241                 q->backing_dev_info.ra_pages = READ_AHEAD;
3242                 blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
3243
3244                 /* This is a hardware imposed limit. */
3245                 blk_queue_max_hw_segments(q, MAXSGENTRIES);
3246
3247                 /* This is a limit in the driver and could be eliminated. */
3248                 blk_queue_max_phys_segments(q, MAXSGENTRIES);
3249
3250                 blk_queue_max_sectors(q, 512);
3251
3252                 blk_queue_softirq_done(q, cciss_softirq_done);
3253
3254                 q->queuedata = hba[i];
3255                 sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
3256                 disk->major = hba[i]->major;
3257                 disk->first_minor = j << NWD_SHIFT;
3258                 disk->fops = &cciss_fops;
3259                 disk->queue = q;
3260                 disk->private_data = drv;
3261                 disk->driverfs_dev = &pdev->dev;
3262                 /* we must register the controller even if no disks exist */
3263                 /* this is for the online array utilities */
3264                 if (!drv->heads && j)
3265                         continue;
3266                 blk_queue_hardsect_size(q, drv->block_size);
3267                 set_capacity(disk, drv->nr_blocks);
3268                 add_disk(disk);
3269         }
3270
3271         return 1;
3272
3273       clean4:
3274 #ifdef CONFIG_CISS_SCSI_TAPE
3275         kfree(hba[i]->scsi_rejects.complete);
3276 #endif
3277         kfree(hba[i]->cmd_pool_bits);
3278         if (hba[i]->cmd_pool)
3279                 pci_free_consistent(hba[i]->pdev,
3280                                     NR_CMDS * sizeof(CommandList_struct),
3281                                     hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3282         if (hba[i]->errinfo_pool)
3283                 pci_free_consistent(hba[i]->pdev,
3284                                     NR_CMDS * sizeof(ErrorInfo_struct),
3285                                     hba[i]->errinfo_pool,
3286                                     hba[i]->errinfo_pool_dhandle);
3287         free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
3288       clean2:
3289         unregister_blkdev(hba[i]->major, hba[i]->devname);
3290       clean1:
3291         hba[i]->busy_initializing = 0;
3292         free_hba(i);
3293         return -1;
3294 }
3295
3296 static void __devexit cciss_remove_one(struct pci_dev *pdev)
3297 {
3298         ctlr_info_t *tmp_ptr;
3299         int i, j;
3300         char flush_buf[4];
3301         int return_code;
3302
3303         if (pci_get_drvdata(pdev) == NULL) {
3304                 printk(KERN_ERR "cciss: Unable to remove device \n");
3305                 return;
3306         }
3307         tmp_ptr = pci_get_drvdata(pdev);
3308         i = tmp_ptr->ctlr;
3309         if (hba[i] == NULL) {
3310                 printk(KERN_ERR "cciss: device appears to "
3311                        "already be removed \n");
3312                 return;
3313         }
3314         /* Turn board interrupts off  and send the flush cache command */
3315         /* sendcmd will turn off interrupt, and send the flush...
3316          * To write all data in the battery backed cache to disks */
3317         memset(flush_buf, 0, 4);
3318         return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
3319                               TYPE_CMD);
3320         if (return_code != IO_OK) {
3321                 printk(KERN_WARNING "Error Flushing cache on controller %d\n",
3322                        i);
3323         }
3324         free_irq(hba[i]->intr[2], hba[i]);
3325
3326 #ifdef CONFIG_PCI_MSI
3327         if (hba[i]->msix_vector)
3328                 pci_disable_msix(hba[i]->pdev);
3329         else if (hba[i]->msi_vector)
3330                 pci_disable_msi(hba[i]->pdev);
3331 #endif                          /* CONFIG_PCI_MSI */
3332
3333         iounmap(hba[i]->vaddr);
3334         cciss_unregister_scsi(i);       /* unhook from SCSI subsystem */
3335         unregister_blkdev(hba[i]->major, hba[i]->devname);
3336         remove_proc_entry(hba[i]->devname, proc_cciss);
3337
3338         /* remove it from the disk list */
3339         for (j = 0; j < NWD; j++) {
3340                 struct gendisk *disk = hba[i]->gendisk[j];
3341                 if (disk) {
3342                         request_queue_t *q = disk->queue;
3343
3344                         if (disk->flags & GENHD_FL_UP)
3345                                 del_gendisk(disk);
3346                         if (q)
3347                                 blk_cleanup_queue(q);
3348                 }
3349         }
3350
3351         pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
3352                             hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3353         pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(ErrorInfo_struct),
3354                             hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
3355         kfree(hba[i]->cmd_pool_bits);
3356 #ifdef CONFIG_CISS_SCSI_TAPE
3357         kfree(hba[i]->scsi_rejects.complete);
3358 #endif
3359         pci_release_regions(pdev);
3360         pci_disable_device(pdev);
3361         pci_set_drvdata(pdev, NULL);
3362         free_hba(i);
3363 }
3364
3365 static struct pci_driver cciss_pci_driver = {
3366         .name = "cciss",
3367         .probe = cciss_init_one,
3368         .remove = __devexit_p(cciss_remove_one),
3369         .id_table = cciss_pci_device_id,        /* id_table */
3370 };
3371
3372 /*
3373  *  This is it.  Register the PCI driver information for the cards we control
3374  *  the OS will call our registered routines when it finds one of our cards.
3375  */
3376 static int __init cciss_init(void)
3377 {
3378         printk(KERN_INFO DRIVER_NAME "\n");
3379
3380         /* Register for our PCI devices */
3381         return pci_register_driver(&cciss_pci_driver);
3382 }
3383
3384 static void __exit cciss_cleanup(void)
3385 {
3386         int i;
3387
3388         pci_unregister_driver(&cciss_pci_driver);
3389         /* double check that all controller entrys have been removed */
3390         for (i = 0; i < MAX_CTLR; i++) {
3391                 if (hba[i] != NULL) {
3392                         printk(KERN_WARNING "cciss: had to remove"
3393                                " controller %d\n", i);
3394                         cciss_remove_one(hba[i]->pdev);
3395                 }
3396         }
3397         remove_proc_entry("cciss", proc_root_driver);
3398 }
3399
3400 static void fail_all_cmds(unsigned long ctlr)
3401 {
3402         /* If we get here, the board is apparently dead. */
3403         ctlr_info_t *h = hba[ctlr];
3404         CommandList_struct *c;
3405         unsigned long flags;
3406
3407         printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
3408         h->alive = 0;           /* the controller apparently died... */
3409
3410         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
3411
3412         pci_disable_device(h->pdev);    /* Make sure it is really dead. */
3413
3414         /* move everything off the request queue onto the completed queue */
3415         while ((c = h->reqQ) != NULL) {
3416                 removeQ(&(h->reqQ), c);
3417                 h->Qdepth--;
3418                 addQ(&(h->cmpQ), c);
3419         }
3420
3421         /* Now, fail everything on the completed queue with a HW error */
3422         while ((c = h->cmpQ) != NULL) {
3423                 removeQ(&h->cmpQ, c);
3424                 c->err_info->CommandStatus = CMD_HARDWARE_ERR;
3425                 if (c->cmd_type == CMD_RWREQ) {
3426                         complete_command(h, c, 0);
3427                 } else if (c->cmd_type == CMD_IOCTL_PEND)
3428                         complete(c->waiting);
3429 #ifdef CONFIG_CISS_SCSI_TAPE
3430                 else if (c->cmd_type == CMD_SCSI)
3431                         complete_scsi_command(c, 0, 0);
3432 #endif
3433         }
3434         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
3435         return;
3436 }
3437
3438 module_init(cciss_init);
3439 module_exit(cciss_cleanup);