e22f4a973c0fdc4d4cf5670e8ace14d83e75abe1
[linux-2.6.git] / drivers / acpi / events / evgpe.c
1 /******************************************************************************
2  *
3  * Module Name: evgpe - General Purpose Event handling and dispatch
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2007, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47
48 #define _COMPONENT          ACPI_EVENTS
49 ACPI_MODULE_NAME("evgpe")
50
51 /* Local prototypes */
52 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
53
54 /*******************************************************************************
55  *
56  * FUNCTION:    acpi_ev_set_gpe_type
57  *
58  * PARAMETERS:  gpe_event_info          - GPE to set
59  *              Type                    - New type
60  *
61  * RETURN:      Status
62  *
63  * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
64  *
65  ******************************************************************************/
66
67 acpi_status
68 acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
69 {
70         acpi_status status;
71
72         ACPI_FUNCTION_TRACE(ev_set_gpe_type);
73
74         /* Validate type and update register enable masks */
75
76         switch (type) {
77         case ACPI_GPE_TYPE_WAKE:
78         case ACPI_GPE_TYPE_RUNTIME:
79         case ACPI_GPE_TYPE_WAKE_RUN:
80                 break;
81
82         default:
83                 return_ACPI_STATUS(AE_BAD_PARAMETER);
84         }
85
86         /* Disable the GPE if currently enabled */
87
88         status = acpi_ev_disable_gpe(gpe_event_info);
89
90         /* Type was validated above */
91
92         gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK;   /* Clear type bits */
93         gpe_event_info->flags |= type;  /* Insert type */
94         return_ACPI_STATUS(status);
95 }
96
97 /*******************************************************************************
98  *
99  * FUNCTION:    acpi_ev_update_gpe_enable_masks
100  *
101  * PARAMETERS:  gpe_event_info          - GPE to update
102  *              Type                    - What to do: ACPI_GPE_DISABLE or
103  *                                        ACPI_GPE_ENABLE
104  *
105  * RETURN:      Status
106  *
107  * DESCRIPTION: Updates GPE register enable masks based on the GPE type
108  *
109  ******************************************************************************/
110
111 acpi_status
112 acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
113                                 u8 type)
114 {
115         struct acpi_gpe_register_info *gpe_register_info;
116         u8 register_bit;
117
118         ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
119
120         gpe_register_info = gpe_event_info->register_info;
121         if (!gpe_register_info) {
122                 return_ACPI_STATUS(AE_NOT_EXIST);
123         }
124         register_bit = (u8)
125             (1 <<
126              (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
127
128         /* 1) Disable case.  Simply clear all enable bits */
129
130         if (type == ACPI_GPE_DISABLE) {
131                 ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
132                                register_bit);
133                 ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
134                 return_ACPI_STATUS(AE_OK);
135         }
136
137         /* 2) Enable case.  Set/Clear the appropriate enable bits */
138
139         switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
140         case ACPI_GPE_TYPE_WAKE:
141                 ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
142                 ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
143                 break;
144
145         case ACPI_GPE_TYPE_RUNTIME:
146                 ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
147                                register_bit);
148                 ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
149                 break;
150
151         case ACPI_GPE_TYPE_WAKE_RUN:
152                 ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
153                 ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
154                 break;
155
156         default:
157                 return_ACPI_STATUS(AE_BAD_PARAMETER);
158         }
159
160         return_ACPI_STATUS(AE_OK);
161 }
162
163 /*******************************************************************************
164  *
165  * FUNCTION:    acpi_ev_enable_gpe
166  *
167  * PARAMETERS:  gpe_event_info          - GPE to enable
168  *              write_to_hardware       - Enable now, or just mark data structs
169  *                                        (WAKE GPEs should be deferred)
170  *
171  * RETURN:      Status
172  *
173  * DESCRIPTION: Enable a GPE based on the GPE type
174  *
175  ******************************************************************************/
176
177 acpi_status
178 acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
179                    u8 write_to_hardware)
180 {
181         acpi_status status;
182
183         ACPI_FUNCTION_TRACE(ev_enable_gpe);
184
185         /* Make sure HW enable masks are updated */
186
187         status =
188             acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE);
189         if (ACPI_FAILURE(status)) {
190                 return_ACPI_STATUS(status);
191         }
192
193         /* Mark wake-enabled or HW enable, or both */
194
195         switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
196         case ACPI_GPE_TYPE_WAKE:
197
198                 ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
199                 break;
200
201         case ACPI_GPE_TYPE_WAKE_RUN:
202
203                 ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
204
205                 /*lint -fallthrough */
206
207         case ACPI_GPE_TYPE_RUNTIME:
208
209                 ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
210
211                 if (write_to_hardware) {
212
213                         /* Clear the GPE (of stale events), then enable it */
214
215                         status = acpi_hw_clear_gpe(gpe_event_info);
216                         if (ACPI_FAILURE(status)) {
217                                 return_ACPI_STATUS(status);
218                         }
219
220                         /* Enable the requested runtime GPE */
221
222                         status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
223                 }
224                 break;
225
226         default:
227                 return_ACPI_STATUS(AE_BAD_PARAMETER);
228         }
229
230         return_ACPI_STATUS(AE_OK);
231 }
232
233 /*******************************************************************************
234  *
235  * FUNCTION:    acpi_ev_disable_gpe
236  *
237  * PARAMETERS:  gpe_event_info          - GPE to disable
238  *
239  * RETURN:      Status
240  *
241  * DESCRIPTION: Disable a GPE based on the GPE type
242  *
243  ******************************************************************************/
244
245 acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
246 {
247         acpi_status status;
248
249         ACPI_FUNCTION_TRACE(ev_disable_gpe);
250
251         if (!(gpe_event_info->flags & ACPI_GPE_ENABLE_MASK)) {
252                 return_ACPI_STATUS(AE_OK);
253         }
254
255         /* Make sure HW enable masks are updated */
256
257         status =
258             acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE);
259         if (ACPI_FAILURE(status)) {
260                 return_ACPI_STATUS(status);
261         }
262
263         /* Mark wake-disabled or HW disable, or both */
264
265         switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
266         case ACPI_GPE_TYPE_WAKE:
267                 ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
268                 break;
269
270         case ACPI_GPE_TYPE_WAKE_RUN:
271                 ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
272
273                 /*lint -fallthrough */
274
275         case ACPI_GPE_TYPE_RUNTIME:
276
277                 /* Disable the requested runtime GPE */
278
279                 ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
280                 status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
281                 break;
282
283         default:
284                 return_ACPI_STATUS(AE_BAD_PARAMETER);
285         }
286
287         return_ACPI_STATUS(AE_OK);
288 }
289
290 /*******************************************************************************
291  *
292  * FUNCTION:    acpi_ev_get_gpe_event_info
293  *
294  * PARAMETERS:  gpe_device          - Device node.  NULL for GPE0/GPE1
295  *              gpe_number          - Raw GPE number
296  *
297  * RETURN:      A GPE event_info struct. NULL if not a valid GPE
298  *
299  * DESCRIPTION: Returns the event_info struct associated with this GPE.
300  *              Validates the gpe_block and the gpe_number
301  *
302  *              Should be called only when the GPE lists are semaphore locked
303  *              and not subject to change.
304  *
305  ******************************************************************************/
306
307 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
308                                                        u32 gpe_number)
309 {
310         union acpi_operand_object *obj_desc;
311         struct acpi_gpe_block_info *gpe_block;
312         acpi_native_uint i;
313
314         ACPI_FUNCTION_ENTRY();
315
316         /* A NULL gpe_block means use the FADT-defined GPE block(s) */
317
318         if (!gpe_device) {
319
320                 /* Examine GPE Block 0 and 1 (These blocks are permanent) */
321
322                 for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
323                         gpe_block = acpi_gbl_gpe_fadt_blocks[i];
324                         if (gpe_block) {
325                                 if ((gpe_number >= gpe_block->block_base_number)
326                                     && (gpe_number <
327                                         gpe_block->block_base_number +
328                                         (gpe_block->register_count * 8))) {
329                                         return (&gpe_block->
330                                                 event_info[gpe_number -
331                                                            gpe_block->
332                                                            block_base_number]);
333                                 }
334                         }
335                 }
336
337                 /* The gpe_number was not in the range of either FADT GPE block */
338
339                 return (NULL);
340         }
341
342         /* A Non-NULL gpe_device means this is a GPE Block Device */
343
344         obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
345                                                gpe_device);
346         if (!obj_desc || !obj_desc->device.gpe_block) {
347                 return (NULL);
348         }
349
350         gpe_block = obj_desc->device.gpe_block;
351
352         if ((gpe_number >= gpe_block->block_base_number) &&
353             (gpe_number <
354              gpe_block->block_base_number + (gpe_block->register_count * 8))) {
355                 return (&gpe_block->
356                         event_info[gpe_number - gpe_block->block_base_number]);
357         }
358
359         return (NULL);
360 }
361
362 /*******************************************************************************
363  *
364  * FUNCTION:    acpi_ev_gpe_detect
365  *
366  * PARAMETERS:  gpe_xrupt_list      - Interrupt block for this interrupt.
367  *                                    Can have multiple GPE blocks attached.
368  *
369  * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
370  *
371  * DESCRIPTION: Detect if any GP events have occurred.  This function is
372  *              executed at interrupt level.
373  *
374  ******************************************************************************/
375
376 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
377 {
378         acpi_status status;
379         struct acpi_gpe_block_info *gpe_block;
380         struct acpi_gpe_register_info *gpe_register_info;
381         u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
382         u8 enabled_status_byte;
383         u32 status_reg;
384         u32 enable_reg;
385         acpi_cpu_flags flags;
386         acpi_native_uint i;
387         acpi_native_uint j;
388
389         ACPI_FUNCTION_NAME(ev_gpe_detect);
390
391         /* Check for the case where there are no GPEs */
392
393         if (!gpe_xrupt_list) {
394                 return (int_status);
395         }
396
397         /*
398          * We need to obtain the GPE lock for both the data structs and registers
399          * Note: Not necessary to obtain the hardware lock, since the GPE registers
400          * are owned by the gpe_lock.
401          */
402         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
403
404         /* Examine all GPE blocks attached to this interrupt level */
405
406         gpe_block = gpe_xrupt_list->gpe_block_list_head;
407         while (gpe_block) {
408                 /*
409                  * Read all of the 8-bit GPE status and enable registers
410                  * in this GPE block, saving all of them.
411                  * Find all currently active GP events.
412                  */
413                 for (i = 0; i < gpe_block->register_count; i++) {
414
415                         /* Get the next status/enable pair */
416
417                         gpe_register_info = &gpe_block->register_info[i];
418
419                         /* Read the Status Register */
420
421                         status =
422                             acpi_hw_low_level_read(ACPI_GPE_REGISTER_WIDTH,
423                                                    &status_reg,
424                                                    &gpe_register_info->
425                                                    status_address);
426                         if (ACPI_FAILURE(status)) {
427                                 goto unlock_and_exit;
428                         }
429
430                         /* Read the Enable Register */
431
432                         status =
433                             acpi_hw_low_level_read(ACPI_GPE_REGISTER_WIDTH,
434                                                    &enable_reg,
435                                                    &gpe_register_info->
436                                                    enable_address);
437                         if (ACPI_FAILURE(status)) {
438                                 goto unlock_and_exit;
439                         }
440
441                         ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
442                                           "Read GPE Register at GPE%X: Status=%02X, Enable=%02X\n",
443                                           gpe_register_info->base_gpe_number,
444                                           status_reg, enable_reg));
445
446                         /* Check if there is anything active at all in this register */
447
448                         enabled_status_byte = (u8) (status_reg & enable_reg);
449                         if (!enabled_status_byte) {
450
451                                 /* No active GPEs in this register, move on */
452
453                                 continue;
454                         }
455
456                         /* Now look at the individual GPEs in this byte register */
457
458                         for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
459
460                                 /* Examine one GPE bit */
461
462                                 if (enabled_status_byte & (1 << j)) {
463                                         /*
464                                          * Found an active GPE. Dispatch the event to a handler
465                                          * or method.
466                                          */
467                                         int_status |=
468                                             acpi_ev_gpe_dispatch(&gpe_block->
469                                                                  event_info[(i *
470                                                                              ACPI_GPE_REGISTER_WIDTH)
471                                                                             +
472                                                                             j],
473                                                                  (u32) j +
474                                                                  gpe_register_info->
475                                                                  base_gpe_number);
476                                 }
477                         }
478                 }
479
480                 gpe_block = gpe_block->next;
481         }
482
483       unlock_and_exit:
484
485         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
486         return (int_status);
487 }
488
489 /*******************************************************************************
490  *
491  * FUNCTION:    acpi_ev_asynch_execute_gpe_method
492  *
493  * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
494  *
495  * RETURN:      None
496  *
497  * DESCRIPTION: Perform the actual execution of a GPE control method. This
498  *              function is called from an invocation of acpi_os_execute and
499  *              therefore does NOT execute at interrupt level - so that
500  *              the control method itself is not executed in the context of
501  *              an interrupt handler.
502  *
503  ******************************************************************************/
504
505 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
506 {
507         struct acpi_gpe_event_info *gpe_event_info = (void *)context;
508         acpi_status status;
509         struct acpi_gpe_event_info local_gpe_event_info;
510         struct acpi_evaluate_info *info;
511
512         ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
513
514         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
515         if (ACPI_FAILURE(status)) {
516                 return_VOID;
517         }
518
519         /* Must revalidate the gpe_number/gpe_block */
520
521         if (!acpi_ev_valid_gpe_event(gpe_event_info)) {
522                 status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
523                 return_VOID;
524         }
525
526         /* Set the GPE flags for return to enabled state */
527
528         (void)acpi_ev_enable_gpe(gpe_event_info, FALSE);
529
530         /*
531          * Take a snapshot of the GPE info for this level - we copy the
532          * info to prevent a race condition with remove_handler/remove_block.
533          */
534         ACPI_MEMCPY(&local_gpe_event_info, gpe_event_info,
535                     sizeof(struct acpi_gpe_event_info));
536
537         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
538         if (ACPI_FAILURE(status)) {
539                 return_VOID;
540         }
541
542         /*
543          * Must check for control method type dispatch one more
544          * time to avoid race with ev_gpe_install_handler
545          */
546         if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) ==
547             ACPI_GPE_DISPATCH_METHOD) {
548
549                 /* Allocate the evaluation information block */
550
551                 info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
552                 if (!info) {
553                         status = AE_NO_MEMORY;
554                 } else {
555                         /*
556                          * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
557                          * control method that corresponds to this GPE
558                          */
559                         info->prefix_node =
560                             local_gpe_event_info.dispatch.method_node;
561                         info->parameters =
562                             ACPI_CAST_PTR(union acpi_operand_object *,
563                                           gpe_event_info);
564                         info->parameter_type = ACPI_PARAM_GPE;
565                         info->flags = ACPI_IGNORE_RETURN_VALUE;
566
567                         status = acpi_ns_evaluate(info);
568                         ACPI_FREE(info);
569                 }
570
571                 if (ACPI_FAILURE(status)) {
572                         ACPI_EXCEPTION((AE_INFO, status,
573                                         "while evaluating GPE method [%4.4s]",
574                                         acpi_ut_get_node_name
575                                         (local_gpe_event_info.dispatch.
576                                          method_node)));
577                 }
578         }
579
580         if ((local_gpe_event_info.flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
581             ACPI_GPE_LEVEL_TRIGGERED) {
582                 /*
583                  * GPE is level-triggered, we clear the GPE status bit after
584                  * handling the event.
585                  */
586                 status = acpi_hw_clear_gpe(&local_gpe_event_info);
587                 if (ACPI_FAILURE(status)) {
588                         return_VOID;
589                 }
590         }
591
592         /* Enable this GPE */
593
594         (void)acpi_hw_write_gpe_enable_reg(&local_gpe_event_info);
595         return_VOID;
596 }
597
598 /*******************************************************************************
599  *
600  * FUNCTION:    acpi_ev_gpe_dispatch
601  *
602  * PARAMETERS:  gpe_event_info  - Info for this GPE
603  *              gpe_number      - Number relative to the parent GPE block
604  *
605  * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
606  *
607  * DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
608  *              or method (e.g. _Lxx/_Exx) handler.
609  *
610  *              This function executes at interrupt level.
611  *
612  ******************************************************************************/
613
614 u32
615 acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
616 {
617         acpi_status status;
618
619         ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
620
621         acpi_gpe_count++;
622
623         /*
624          * If edge-triggered, clear the GPE status bit now.  Note that
625          * level-triggered events are cleared after the GPE is serviced.
626          */
627         if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
628             ACPI_GPE_EDGE_TRIGGERED) {
629                 status = acpi_hw_clear_gpe(gpe_event_info);
630                 if (ACPI_FAILURE(status)) {
631                         ACPI_EXCEPTION((AE_INFO, status,
632                                         "Unable to clear GPE[%2X]",
633                                         gpe_number));
634                         return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
635                 }
636         }
637
638         /*
639          * Dispatch the GPE to either an installed handler, or the control method
640          * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
641          * it and do not attempt to run the method. If there is neither a handler
642          * nor a method, we disable this GPE to prevent further such pointless
643          * events from firing.
644          */
645         switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
646         case ACPI_GPE_DISPATCH_HANDLER:
647
648                 /*
649                  * Invoke the installed handler (at interrupt level)
650                  * Ignore return status for now.  TBD: leave GPE disabled on error?
651                  */
652                 (void)gpe_event_info->dispatch.handler->address(gpe_event_info->
653                                                                 dispatch.
654                                                                 handler->
655                                                                 context);
656
657                 /* It is now safe to clear level-triggered events. */
658
659                 if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
660                     ACPI_GPE_LEVEL_TRIGGERED) {
661                         status = acpi_hw_clear_gpe(gpe_event_info);
662                         if (ACPI_FAILURE(status)) {
663                                 ACPI_EXCEPTION((AE_INFO, status,
664                                                 "Unable to clear GPE[%2X]",
665                                                 gpe_number));
666                                 return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
667                         }
668                 }
669                 break;
670
671         case ACPI_GPE_DISPATCH_METHOD:
672
673                 /*
674                  * Disable the GPE, so it doesn't keep firing before the method has a
675                  * chance to run (it runs asynchronously with interrupts enabled).
676                  */
677                 status = acpi_ev_disable_gpe(gpe_event_info);
678                 if (ACPI_FAILURE(status)) {
679                         ACPI_EXCEPTION((AE_INFO, status,
680                                         "Unable to disable GPE[%2X]",
681                                         gpe_number));
682                         return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
683                 }
684
685                 /*
686                  * Execute the method associated with the GPE
687                  * NOTE: Level-triggered GPEs are cleared after the method completes.
688                  */
689                 status = acpi_os_execute(OSL_GPE_HANDLER,
690                                          acpi_ev_asynch_execute_gpe_method,
691                                          gpe_event_info);
692                 if (ACPI_FAILURE(status)) {
693                         ACPI_EXCEPTION((AE_INFO, status,
694                                         "Unable to queue handler for GPE[%2X] - event disabled",
695                                         gpe_number));
696                 }
697                 break;
698
699         default:
700
701                 /* No handler or method to run! */
702
703                 ACPI_ERROR((AE_INFO,
704                             "No handler or method for GPE[%2X], disabling event",
705                             gpe_number));
706
707                 /*
708                  * Disable the GPE. The GPE will remain disabled until the ACPI
709                  * Core Subsystem is restarted, or a handler is installed.
710                  */
711                 status = acpi_ev_disable_gpe(gpe_event_info);
712                 if (ACPI_FAILURE(status)) {
713                         ACPI_EXCEPTION((AE_INFO, status,
714                                         "Unable to disable GPE[%2X]",
715                                         gpe_number));
716                         return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
717                 }
718                 break;
719         }
720
721         return_UINT32(ACPI_INTERRUPT_HANDLED);
722 }