arch/powerpc/boot/dts/mpc832x_mds.dts

   1 /*
   2  * MPC8323E EMDS Device Tree Source
   3  *
   4  * Copyright 2006 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 / {
  13         model = "MPC8323EMDS";
  14         compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 PowerPC,8323@0 {
  23                         device_type = "cpu";
  24                         reg = <0>;
  25                         d-cache-line-size = <20>;       // 32 bytes
  26                         i-cache-line-size = <20>;       // 32 bytes
  27                         d-cache-size = <4000>;          // L1, 16K
  28                         i-cache-size = <4000>;          // L1, 16K
  29                         timebase-frequency = <0>;
  30                         bus-frequency = <0>;
  31                         clock-frequency = <0>;
  32                         32-bit;
  33                 };
  34         };
  35
  36         memory {
  37                 device_type = "memory";
  38                 reg = <00000000 08000000>;
  39         };
  40
  41         bcsr@f8000000 {
  42                 device_type = "board-control";
  43                 reg = <f8000000 8000>;
  44         };
  45
  46         soc8323@e0000000 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 #interrupt-cells = <2>;
  50                 device_type = "soc";
  51                 ranges = <0 e0000000 00100000>;
  52                 reg = <e0000000 00000200>;
  53                 bus-frequency = <7DE2900>;
  54
  55                 wdt@200 {
  56                         device_type = "watchdog";
  57                         compatible = "mpc83xx_wdt";
  58                         reg = <200 100>;
  59                 };
  60
  61                 i2c@3000 {
  62                         device_type = "i2c";
  63                         compatible = "fsl-i2c";
  64                         reg = <3000 100>;
  65                         interrupts = <e 8>;
  66                         interrupt-parent = < &ipic >;
  67                         dfsrr;
  68                 };
  69
  70                 serial@4500 {
  71                         device_type = "serial";
  72                         compatible = "ns16550";
  73                         reg = <4500 100>;
  74                         clock-frequency = <0>;
  75                         interrupts = <9 8>;
  76                         interrupt-parent = < &ipic >;
  77                 };
  78
  79                 serial@4600 {
  80                         device_type = "serial";
  81                         compatible = "ns16550";
  82                         reg = <4600 100>;
  83                         clock-frequency = <0>;
  84                         interrupts = <a 8>;
  85                         interrupt-parent = < &ipic >;
  86                 };
  87
  88                 crypto@30000 {
  89                         device_type = "crypto";
  90                         model = "SEC2";
  91                         compatible = "talitos";
  92                         reg = <30000 7000>;
  93                         interrupts = <b 8>;
  94                         interrupt-parent = < &ipic >;
  95                         /* Rev. 2.2 */
  96                         num-channels = <1>;
  97                         channel-fifo-len = <18>;
  98                         exec-units-mask = <0000004c>;
  99                         descriptor-types-mask = <0122003f>;
 100                 };
 101
 102                 pci@8500 {
 103                         interrupt-map-mask = <f800 0 0 7>;
 104                         interrupt-map = <
 105                                         /* IDSEL 0x11 AD17 */
 106                                          8800 0 0 1 &ipic 14 8
 107                                          8800 0 0 2 &ipic 15 8
 108                                          8800 0 0 3 &ipic 16 8
 109                                          8800 0 0 4 &ipic 17 8
 110
 111                                         /* IDSEL 0x12 AD18 */
 112                                          9000 0 0 1 &ipic 16 8
 113                                          9000 0 0 2 &ipic 17 8
 114                                          9000 0 0 3 &ipic 14 8
 115                                          9000 0 0 4 &ipic 15 8
 116
 117                                         /* IDSEL 0x13 AD19 */
 118                                          9800 0 0 1 &ipic 17 8
 119                                          9800 0 0 2 &ipic 14 8
 120                                          9800 0 0 3 &ipic 15 8
 121                                          9800 0 0 4 &ipic 16 8
 122
 123                                         /* IDSEL 0x15 AD21*/
 124                                          a800 0 0 1 &ipic 14 8
 125                                          a800 0 0 2 &ipic 15 8
 126                                          a800 0 0 3 &ipic 16 8
 127                                          a800 0 0 4 &ipic 17 8
 128
 129                                         /* IDSEL 0x16 AD22*/
 130                                          b000 0 0 1 &ipic 17 8
 131                                          b000 0 0 2 &ipic 14 8
 132                                          b000 0 0 3 &ipic 15 8
 133                                          b000 0 0 4 &ipic 16 8
 134
 135                                         /* IDSEL 0x17 AD23*/
 136                                          b800 0 0 1 &ipic 16 8
 137                                          b800 0 0 2 &ipic 17 8
 138                                          b800 0 0 3 &ipic 14 8
 139                                          b800 0 0 4 &ipic 15 8
 140
 141                                         /* IDSEL 0x18 AD24*/
 142                                          c000 0 0 1 &ipic 15 8
 143                                          c000 0 0 2 &ipic 16 8
 144                                          c000 0 0 3 &ipic 17 8
 145                                          c000 0 0 4 &ipic 14 8>;
 146                         interrupt-parent = < &ipic >;
 147                         interrupts = <42 8>;
 148                         bus-range = <0 0>;
 149                         ranges = <02000000 0 90000000 90000000 0 10000000
 150                                   42000000 0 80000000 80000000 0 10000000
 151                                   01000000 0 00000000 d0000000 0 00100000>;
 152                         clock-frequency = <0>;
 153                         #interrupt-cells = <1>;
 154                         #size-cells = <2>;
 155                         #address-cells = <3>;
 156                         reg = <8500 100>;
 157                         compatible = "fsl,mpc8349-pci";
 158                         device_type = "pci";
 159                 };
 160
 161                 ipic: pic@700 {
 162                         interrupt-controller;
 163                         #address-cells = <0>;
 164                         #interrupt-cells = <2>;
 165                         reg = <700 100>;
 166                         built-in;
 167                         device_type = "ipic";
 168                 };
 169
 170                 par_io@1400 {
 171                         reg = <1400 100>;
 172                         device_type = "par_io";
 173                         num-ports = <7>;
 174
 175                         pio3: ucc_pin@03 {
 176                                 pio-map = <
 177                         /* port  pin  dir  open_drain  assignment  has_irq */
 178                                         3  4  3  0  2  0  /* MDIO */
 179                                         3  5  1  0  2  0  /* MDC */
 180                                         0  d  2  0  1  0        /* RX_CLK (CLK9) */
 181                                         3 18  2  0  1  0        /* TX_CLK (CLK10) */
 182                                         1  1  1  0  1  0        /* TxD1 */
 183                                         1  0  1  0  1  0        /* TxD0 */
 184                                         1  1  1  0  1  0        /* TxD1 */
 185                                         1  2  1  0  1  0        /* TxD2 */
 186                                         1  3  1  0  1  0        /* TxD3 */
 187                                         1  4  2  0  1  0        /* RxD0 */
 188                                         1  5  2  0  1  0        /* RxD1 */
 189                                         1  6  2  0  1  0        /* RxD2 */
 190                                         1  7  2  0  1  0        /* RxD3 */
 191                                         1  8  2  0  1  0        /* RX_ER */
 192                                         1  9  1  0  1  0        /* TX_ER */
 193                                         1  a  2  0  1  0        /* RX_DV */
 194                                         1  b  2  0  1  0        /* COL */
 195                                         1  c  1  0  1  0        /* TX_EN */
 196                                         1  d  2  0  1  0>;/* CRS */
 197                         };
 198                         pio4: ucc_pin@04 {
 199                                 pio-map = <
 200                         /* port  pin  dir  open_drain  assignment  has_irq */
 201                                         3 1f  2  0  1  0        /* RX_CLK (CLK7) */
 202                                         3  6  2  0  1  0        /* TX_CLK (CLK8) */
 203                                         1 12  1  0  1  0        /* TxD0 */
 204                                         1 13  1  0  1  0        /* TxD1 */
 205                                         1 14  1  0  1  0        /* TxD2 */
 206                                         1 15  1  0  1  0        /* TxD3 */
 207                                         1 16  2  0  1  0        /* RxD0 */
 208                                         1 17  2  0  1  0        /* RxD1 */
 209                                         1 18  2  0  1  0        /* RxD2 */
 210                                         1 19  2  0  1  0        /* RxD3 */
 211                                         1 1a  2  0  1  0        /* RX_ER */
 212                                         1 1b  1  0  1  0        /* TX_ER */
 213                                         1 1c  2  0  1  0        /* RX_DV */
 214                                         1 1d  2  0  1  0        /* COL */
 215                                         1 1e  1  0  1  0        /* TX_EN */
 216                                         1 1f  2  0  1  0>;/* CRS */
 217                         };
 218                 };
 219         };
 220
 221         qe@e0100000 {
 222                 #address-cells = <1>;
 223                 #size-cells = <1>;
 224                 device_type = "qe";
 225                 model = "QE";
 226                 ranges = <0 e0100000 00100000>;
 227                 reg = <e0100000 480>;
 228                 brg-frequency = <0>;
 229                 bus-frequency = <BCD3D80>;
 230
 231                 muram@10000 {
 232                         device_type = "muram";
 233                         ranges = <0 00010000 00004000>;
 234
 235                         data-only@0 {
 236                                 reg = <0 4000>;
 237                         };
 238                 };
 239
 240                 spi@4c0 {
 241                         device_type = "spi";
 242                         compatible = "fsl_spi";
 243                         reg = <4c0 40>;
 244                         interrupts = <2>;
 245                         interrupt-parent = < &qeic >;
 246                         mode = "cpu";
 247                 };
 248
 249                 spi@500 {
 250                         device_type = "spi";
 251                         compatible = "fsl_spi";
 252                         reg = <500 40>;
 253                         interrupts = <1>;
 254                         interrupt-parent = < &qeic >;
 255                         mode = "cpu";
 256                 };
 257
 258                 usb@6c0 {
 259                         device_type = "usb";
 260                         compatible = "qe_udc";
 261                         reg = <6c0 40 8B00 100>;
 262                         interrupts = <b>;
 263                         interrupt-parent = < &qeic >;
 264                         mode = "slave";
 265                 };
 266
 267                 ucc@2200 {
 268                         device_type = "network";
 269                         compatible = "ucc_geth";
 270                         model = "UCC";
 271                         device-id = <3>;
 272                         reg = <2200 200>;
 273                         interrupts = <22>;
 274                         interrupt-parent = < &qeic >;
 275                         /*
 276                          * mac-address is deprecated and will be removed
 277                          * in 2.6.25.  Only recent versions of
 278                          * U-Boot support local-mac-address, however.
 279                          */
 280                         mac-address = [ 00 00 00 00 00 00 ];
 281                         local-mac-address = [ 00 00 00 00 00 00 ];
 282                         rx-clock = <19>;
 283                         tx-clock = <1a>;
 284                         phy-handle = < &phy3 >;
 285                         pio-handle = < &pio3 >;
 286                 };
 287
 288                 ucc@3200 {
 289                         device_type = "network";
 290                         compatible = "ucc_geth";
 291                         model = "UCC";
 292                         device-id = <4>;
 293                         reg = <3000 200>;
 294                         interrupts = <23>;
 295                         interrupt-parent = < &qeic >;
 296                         /*
 297                          * mac-address is deprecated and will be removed
 298                          * in 2.6.25.  Only recent versions of
 299                          * U-Boot support local-mac-address, however.
 300                          */
 301                         mac-address = [ 00 00 00 00 00 00 ];
 302                         local-mac-address = [ 00 00 00 00 00 00 ];
 303                         rx-clock = <17>;
 304                         tx-clock = <18>;
 305                         phy-handle = < &phy4 >;
 306                         pio-handle = < &pio4 >;
 307                 };
 308
 309                 mdio@2320 {
 310                         #address-cells = <1>;
 311                         #size-cells = <0>;
 312                         reg = <2320 18>;
 313                         device_type = "mdio";
 314                         compatible = "ucc_geth_phy";
 315
 316                         phy3: ethernet-phy@03 {
 317                                 interrupt-parent = < &ipic >;
 318                                 interrupts = <11 8>;
 319                                 reg = <3>;
 320                                 device_type = "ethernet-phy";
 321                         };
 322                         phy4: ethernet-phy@04 {
 323                                 interrupt-parent = < &ipic >;
 324                                 interrupts = <12 8>;
 325                                 reg = <4>;
 326                                 device_type = "ethernet-phy";
 327                         };
 328                 };
 329
 330                 qeic: qeic@80 {
 331                         interrupt-controller;
 332                         device_type = "qeic";
 333                         #address-cells = <0>;
 334                         #interrupt-cells = <1>;
 335                         reg = <80 80>;
 336                         built-in;
 337                         big-endian;
 338                         interrupts = <20 8 21 8>; //high:32 low:33
 339                         interrupt-parent = < &ipic >;
 340                 };
 341         };
 342 };