Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
[linux-2.6.git] / arch / powerpc / boot / Makefile
1 # Makefile for making ELF bootable images for booting on CHRP
2 # using Open Firmware.
3 #
4 # Geert Uytterhoeven    September 1997
5 #
6 # Based on coffboot by Paul Mackerras
7 # Simplified for ppc64 by Todd Inglett
8 #
9 # NOTE: this code is built for 32 bit in ELF32 format even though
10 #       it packages a 64 bit kernel.  We do this to simplify the
11 #       bootloader and increase compatibility with OpenFirmware.
12 #
13 #       To this end we need to define BOOTCC, etc, as the tools
14 #       needed to build the 32 bit image.  That's normally the same
15 #       compiler for the rest of the kernel, with the -m32 flag added.
16 #       To make it easier to setup a cross compiler,
17 #       CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
18 #       in the toplevel makefile.
19
20 all: $(obj)/zImage
21
22 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
23                  -fno-strict-aliasing -Os -msoft-float -pipe \
24                  -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
25                  -isystem $(shell $(CROSS32CC) -print-file-name=include)
26 BOOTAFLAGS      := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
27
28 ifdef CONFIG_DEBUG_INFO
29 BOOTCFLAGS      += -g
30 endif
31
32 ifeq ($(call cc-option-yn, -fstack-protector),y)
33 BOOTCFLAGS      += -fno-stack-protector
34 endif
35
36 BOOTCFLAGS      += -I$(obj) -I$(srctree)/$(obj)
37
38 DTC_FLAGS       ?= -p 1024
39
40 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
41 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
42 $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
43 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
44 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
45 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
46 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
47 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
48 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
49 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
50
51
52 zlib       := inffast.c inflate.c inftrees.c
53 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
54 zliblinuxheader := zlib.h zconf.h zutil.h
55
56 $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
57         $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
58
59 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
60 libfdtheader := fdt.h libfdt.h libfdt_internal.h
61
62 $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
63         $(addprefix $(obj)/,$(libfdtheader))
64
65 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
66                 $(libfdt) libfdt-wrapper.c \
67                 ns16550.c serial.c simple_alloc.c div64.S util.S \
68                 gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
69                 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
70                 cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
71                 fsl-soc.c mpc8xx.c pq2.c ugecon.c
72 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
73                 cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
74                 prpmc2800.c \
75                 ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
76                 cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
77                 cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
78                 fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
79                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
80                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
81                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
82                 cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
83                 gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
84                 treeboot-currituck.c
85 src-boot := $(src-wlib) $(src-plat) empty.c
86
87 src-boot := $(addprefix $(obj)/, $(src-boot))
88 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
89 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
90 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
91
92 quiet_cmd_copy_zlib = COPY    $@
93       cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
94
95 quiet_cmd_copy_zlibheader = COPY    $@
96       cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
97 # stddef.h for NULL
98 quiet_cmd_copy_zliblinuxheader = COPY    $@
99       cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
100
101 $(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
102         $(call cmd,copy_zlib)
103
104 $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
105         $(call cmd,copy_zlibheader)
106
107 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
108         $(call cmd,copy_zliblinuxheader)
109
110 quiet_cmd_copy_libfdt = COPY    $@
111       cmd_copy_libfdt = cp $< $@
112
113 $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
114         $(call cmd,copy_libfdt)
115
116 $(obj)/empty.c:
117         @touch $@
118
119 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
120         @cp $< $@
121
122 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
123                 $(libfdt) $(libfdtheader) \
124                 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
125
126 quiet_cmd_bootcc = BOOTCC  $@
127       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
128
129 quiet_cmd_bootas = BOOTAS  $@
130       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
131
132 quiet_cmd_bootar = BOOTAR  $@
133       cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
134
135 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
136         $(call if_changed_dep,bootcc)
137 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
138         $(Q)mkdir -p $(dir $@)
139         $(call if_changed_dep,bootcc)
140 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
141         $(Q)mkdir -p $(dir $@)
142         $(call if_changed_dep,bootas)
143
144 $(obj)/wrapper.a: $(obj-wlib) FORCE
145         $(call if_changed,bootar)
146
147 hostprogs-y     := addnote hack-coff mktree
148
149 targets         += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
150 extra-y         := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
151                    $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
152
153 dtstree         := $(srctree)/$(src)/dts
154
155 wrapper         :=$(srctree)/$(src)/wrapper
156 wrapperbits     := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
157                         $(wrapper) FORCE
158
159 #############
160 # Bits for building various flavours of zImage
161
162 ifneq ($(CROSS32_COMPILE),)
163 CROSSWRAP := -C "$(CROSS32_COMPILE)"
164 else
165 ifneq ($(CROSS_COMPILE),)
166 CROSSWRAP := -C "$(CROSS_COMPILE)"
167 endif
168 endif
169
170 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
171 quiet_cmd_wrap  = WRAP    $@
172       cmd_wrap  =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
173                 $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
174
175 image-$(CONFIG_PPC_PSERIES)             += zImage.pseries
176 image-$(CONFIG_PPC_POWERNV)             += zImage.pseries
177 image-$(CONFIG_PPC_MAPLE)               += zImage.maple
178 image-$(CONFIG_PPC_IBM_CELL_BLADE)      += zImage.pseries
179 image-$(CONFIG_PPC_PS3)                 += dtbImage.ps3
180 image-$(CONFIG_PPC_CELLEB)              += zImage.pseries
181 image-$(CONFIG_PPC_CELL_QPACE)          += zImage.pseries
182 image-$(CONFIG_PPC_CHRP)                += zImage.chrp
183 image-$(CONFIG_PPC_EFIKA)               += zImage.chrp
184 image-$(CONFIG_PPC_PMAC)                += zImage.pmac
185 image-$(CONFIG_PPC_HOLLY)               += dtbImage.holly
186 image-$(CONFIG_PPC_PRPMC2800)           += dtbImage.prpmc2800
187 image-$(CONFIG_PPC_ISERIES)             += zImage.iseries
188 image-$(CONFIG_DEFAULT_UIMAGE)          += uImage
189 image-$(CONFIG_EPAPR_BOOT)              += zImage.epapr
190
191 #
192 # Targets which embed a device tree blob
193 #
194 # Theses are default targets to build images which embed device tree blobs.
195 # They are only required on boards which do not have FDT support in firmware.
196 # Boards with newish u-boot firmware can use the uImage target above
197 #
198
199 # Board ports in arch/powerpc/platform/40x/Kconfig
200 image-$(CONFIG_EP405)                   += dtbImage.ep405
201 image-$(CONFIG_HOTFOOT)                 += cuImage.hotfoot
202 image-$(CONFIG_WALNUT)                  += treeImage.walnut
203 image-$(CONFIG_ACADIA)                  += cuImage.acadia
204 image-$(CONFIG_OBS600)                  += uImage.obs600
205
206 # Board ports in arch/powerpc/platform/44x/Kconfig
207 image-$(CONFIG_EBONY)                   += treeImage.ebony cuImage.ebony
208 image-$(CONFIG_BAMBOO)                  += treeImage.bamboo cuImage.bamboo
209 image-$(CONFIG_SAM440EP)                += cuImage.sam440ep
210 image-$(CONFIG_SEQUOIA)                 += cuImage.sequoia
211 image-$(CONFIG_RAINIER)                 += cuImage.rainier
212 image-$(CONFIG_TAISHAN)                 += cuImage.taishan
213 image-$(CONFIG_KATMAI)                  += cuImage.katmai
214 image-$(CONFIG_WARP)                    += cuImage.warp
215 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
216 image-$(CONFIG_ISS4xx)                  += treeImage.iss4xx \
217                                            treeImage.iss4xx-mpic
218 image-$(CONFIG_CURRITUCK)                       += treeImage.currituck
219
220 # Board ports in arch/powerpc/platform/8xx/Kconfig
221 image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
222 image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
223 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
224 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
225                                            dtbImage.adder875-redboot
226
227 # Board ports in arch/powerpc/platform/52xx/Kconfig
228 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200 lite5200.dtb
229 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200b lite5200b.dtb
230 image-$(CONFIG_PPC_MEDIA5200)           += cuImage.media5200 media5200.dtb
231
232 # Board ports in arch/powerpc/platform/82xx/Kconfig
233 image-$(CONFIG_MPC8272_ADS)             += cuImage.mpc8272ads
234 image-$(CONFIG_PQ2FADS)                 += cuImage.pq2fads
235 image-$(CONFIG_EP8248E)                 += dtbImage.ep8248e
236
237 # Board ports in arch/powerpc/platform/83xx/Kconfig
238 image-$(CONFIG_MPC832x_MDS)             += cuImage.mpc832x_mds
239 image-$(CONFIG_MPC832x_RDB)             += cuImage.mpc832x_rdb
240 image-$(CONFIG_MPC834x_ITX)             += cuImage.mpc8349emitx \
241                                            cuImage.mpc8349emitxgp
242 image-$(CONFIG_MPC834x_MDS)             += cuImage.mpc834x_mds
243 image-$(CONFIG_MPC836x_MDS)             += cuImage.mpc836x_mds
244 image-$(CONFIG_ASP834x)                 += dtbImage.asp834x-redboot
245
246 # Board ports in arch/powerpc/platform/85xx/Kconfig
247 image-$(CONFIG_MPC8540_ADS)             += cuImage.mpc8540ads
248 image-$(CONFIG_MPC8560_ADS)             += cuImage.mpc8560ads
249 image-$(CONFIG_MPC85xx_CDS)             += cuImage.mpc8541cds \
250                                            cuImage.mpc8548cds \
251                                            cuImage.mpc8555cds
252 image-$(CONFIG_MPC85xx_MDS)             += cuImage.mpc8568mds
253 image-$(CONFIG_MPC85xx_DS)              += cuImage.mpc8544ds \
254                                            cuImage.mpc8572ds
255 image-$(CONFIG_TQM8540)                 += cuImage.tqm8540
256 image-$(CONFIG_TQM8541)                 += cuImage.tqm8541
257 image-$(CONFIG_TQM8548)                 += cuImage.tqm8548
258 image-$(CONFIG_TQM8555)                 += cuImage.tqm8555
259 image-$(CONFIG_TQM8560)                 += cuImage.tqm8560
260 image-$(CONFIG_SBC8548)                 += cuImage.sbc8548
261 image-$(CONFIG_SBC8560)                 += cuImage.sbc8560
262 image-$(CONFIG_KSI8560)                 += cuImage.ksi8560
263
264 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
265 image-$(CONFIG_STORCENTER)              += cuImage.storcenter
266 image-$(CONFIG_MPC7448HPC2)             += cuImage.mpc7448hpc2
267 image-$(CONFIG_PPC_C2K)                 += cuImage.c2k
268 image-$(CONFIG_GAMECUBE)                += dtbImage.gamecube
269 image-$(CONFIG_WII)                     += dtbImage.wii
270
271 # Board port in arch/powerpc/platform/amigaone/Kconfig
272 image-$(CONFIG_AMIGAONE)                += cuImage.amigaone
273
274 # For 32-bit powermacs, build the COFF and miboot images
275 # as well as the ELF images.
276 ifeq ($(CONFIG_PPC32),y)
277 image-$(CONFIG_PPC_PMAC)        += zImage.coff zImage.miboot
278 endif
279
280 # Allow extra targets to be added to the defconfig
281 image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
282
283 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
284 initrd-y := $(patsubst zImage%, zImage.initrd%, \
285                 $(patsubst dtbImage%, dtbImage.initrd%, \
286                 $(patsubst simpleImage%, simpleImage.initrd%, \
287                 $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
288 initrd-y := $(filter-out $(image-y), $(initrd-y))
289 targets += $(image-y) $(initrd-y)
290
291 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
292
293 # Don't put the ramdisk on the pattern rule; when its missing make will try
294 # the pattern rule with less dependencies that also matches (even with the
295 # hard dependency listed).
296 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
297         $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
298
299 $(obj)/zImage.%: vmlinux $(wrapperbits)
300         $(call if_changed,wrap,$*)
301
302 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
303 $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
304         $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
305
306 $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
307         $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
308
309 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
310 # prefix
311 $(obj)/vmlinux.strip: vmlinux
312         $(STRIP) -s -R .comment $< -o $@
313
314 # The iseries hypervisor won't take an ET_DYN executable, so this
315 # changes the type (byte 17) in the file to ET_EXEC (2).
316 $(obj)/zImage.iseries: vmlinux
317         $(STRIP) -s -R .comment $< -o $@
318         printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
319
320 $(obj)/uImage: vmlinux $(wrapperbits)
321         $(call if_changed,wrap,uboot)
322
323 $(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
324         $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
325
326 $(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
327         $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
328
329 $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
330         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
331
332 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
333         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
334
335 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
336         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
337
338 $(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
339         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
340
341 $(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
342         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
343
344 $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
345         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
346
347 # Rule to build device tree blobs
348 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
349         $(call if_changed_dep,dtc)
350
351 # If there isn't a platform selected then just strip the vmlinux.
352 ifeq (,$(image-y))
353 image-y := vmlinux.strip
354 endif
355
356 $(obj)/zImage:          $(addprefix $(obj)/, $(image-y))
357         @rm -f $@; ln $< $@
358 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
359         @rm -f $@; ln $< $@
360
361 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
362         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
363
364 # anything not in $(targets)
365 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
366         zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
367         zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
368         zImage.maple simpleImage.* otheros.bld *.dtb
369
370 # clean up files cached by wrapper
371 clean-kernel := vmlinux.strip vmlinux.bin
372 clean-kernel += $(addsuffix .gz,$(clean-kernel))
373 # If not absolute clean-files are relative to $(obj).
374 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
375
376 WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
377 WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
378 WRAPPER_BINDIR := /usr/sbin
379 INSTALL := install
380
381 extra-installed         := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
382 hostprogs-installed     := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
383 wrapper-installed       := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
384 dts-installed           := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
385
386 all-installed           := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
387
388 quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
389       cmd_mkdir           = mkdir -p $@
390
391 quiet_cmd_install         = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
392       cmd_install         = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
393
394 quiet_cmd_install_dts     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
395       cmd_install_dts     = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
396
397 quiet_cmd_install_exe     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
398       cmd_install_exe     = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
399
400 quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
401       cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
402                                 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
403                                           -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
404
405
406 $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
407         $(call cmd,mkdir)
408
409 $(extra-installed)      : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
410         $(call cmd,install)
411
412 $(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
413         $(call cmd,install_exe)
414
415 $(dts-installed)        : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
416         $(call cmd,install_dts)
417
418 $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
419         $(call cmd,install_wrapper)
420
421 $(obj)/bootwrapper_install: $(all-installed)
422