4458abb67c51bc5df204d261aeaed778122476a4
[linux-2.6.git] / arch / powerpc / boot / Makefile
1 # Makefile for making ELF bootable images for booting on CHRP
2 # using Open Firmware.
3 #
4 # Geert Uytterhoeven    September 1997
5 #
6 # Based on coffboot by Paul Mackerras
7 # Simplified for ppc64 by Todd Inglett
8 #
9 # NOTE: this code is built for 32 bit in ELF32 format even though
10 #       it packages a 64 bit kernel.  We do this to simplify the
11 #       bootloader and increase compatibility with OpenFirmware.
12 #
13 #       To this end we need to define BOOTCC, etc, as the tools
14 #       needed to build the 32 bit image.  That's normally the same
15 #       compiler for the rest of the kernel, with the -m32 flag added.
16 #       To make it easier to setup a cross compiler,
17 #       CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
18 #       in the toplevel makefile.
19
20 all: $(obj)/zImage
21
22 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
23                  -fno-strict-aliasing -Os -msoft-float -pipe \
24                  -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
25                  -isystem $(shell $(CROSS32CC) -print-file-name=include)
26 BOOTAFLAGS      := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
27
28 ifdef CONFIG_DEBUG_INFO
29 BOOTCFLAGS      += -g
30 endif
31
32 ifeq ($(call cc-option-yn, -fstack-protector),y)
33 BOOTCFLAGS      += -fno-stack-protector
34 endif
35
36 BOOTCFLAGS      += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
37
38 DTS_FLAGS       ?= -p 1024
39
40 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
41 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
42 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
43 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
44 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
45 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
46 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
47
48
49 zlib       := inffast.c inflate.c inftrees.c
50 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
51 zliblinuxheader := zlib.h zconf.h zutil.h
52
53 $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
54         $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
55
56 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
57 src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
58                 $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
59                 ns16550.c serial.c simple_alloc.c div64.S util.S \
60                 gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
61                 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
62                 cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
63                 fsl-soc.c mpc8xx.c pq2.c
64 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
65                 cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
66                 ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
67                 cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
68                 cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
69                 fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
70                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
71                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
72                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
73                 cuboot-acadia.c cuboot-amigaone.c
74 src-boot := $(src-wlib) $(src-plat) empty.c
75
76 src-boot := $(addprefix $(obj)/, $(src-boot))
77 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
78 obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
79 obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
80
81 quiet_cmd_copy_zlib = COPY    $@
82       cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
83
84 quiet_cmd_copy_zlibheader = COPY    $@
85       cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
86 # stddef.h for NULL
87 quiet_cmd_copy_zliblinuxheader = COPY    $@
88       cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
89
90 $(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
91         $(call cmd,copy_zlib)
92
93 $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
94         $(call cmd,copy_zlibheader)
95
96 $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
97         $(call cmd,copy_zliblinuxheader)
98
99 $(obj)/empty.c:
100         @touch $@
101
102 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
103         @cp $< $@
104
105 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
106                 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
107
108 quiet_cmd_bootcc = BOOTCC  $@
109       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
110
111 quiet_cmd_bootas = BOOTAS  $@
112       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
113
114 quiet_cmd_bootar = BOOTAR  $@
115       cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
116
117 $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
118         $(Q)mkdir -p $(dir $@)
119         $(call if_changed_dep,bootcc)
120 $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
121         $(Q)mkdir -p $(dir $@)
122         $(call if_changed_dep,bootas)
123
124 $(obj)/wrapper.a: $(obj-wlib) FORCE
125         $(call if_changed,bootar)
126
127 hostprogs-y     := addnote addRamDisk hack-coff mktree dtc
128
129 targets         += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
130 extra-y         := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
131                    $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
132
133 dtstree         := $(srctree)/$(src)/dts
134
135 wrapper         :=$(srctree)/$(src)/wrapper
136 wrapperbits     := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
137                         $(wrapper) FORCE
138
139 #############
140 # Bits for building dtc
141 # DTC_GENPARSER      := 1    # Uncomment to rebuild flex/bison output
142
143 dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
144 dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
145 dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
146
147 # prerequisites on generated files needs to be explicit
148 $(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
149 $(obj)/dtc-src/dtc-lexer.lex.o:  $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
150
151 HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
152
153 targets += dtc-src/dtc-parser.tab.c
154 targets += dtc-src/dtc-lexer.lex.c
155
156 clean-files += dtc-src/dtc-parser.tab.h
157
158 ifdef DTC_GENPARSER
159 BISON = bison
160 FLEX = flex
161
162 quiet_cmd_bison = BISON   $@
163       cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
164 quiet_cmd_flex = FLEX    $@
165       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
166
167 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
168         $(call if_changed,bison)
169
170 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
171
172 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
173         $(call if_changed,flex)
174 endif
175
176 #############
177 # Bits for building various flavours of zImage
178
179 ifneq ($(CROSS32_COMPILE),)
180 CROSSWRAP := -C "$(CROSS32_COMPILE)"
181 else
182 ifneq ($(CROSS_COMPILE),)
183 CROSSWRAP := -C "$(CROSS_COMPILE)"
184 endif
185 endif
186
187 # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
188 quiet_cmd_wrap  = WRAP    $@
189       cmd_wrap  =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
190                 $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
191
192 image-$(CONFIG_PPC_PSERIES)             += zImage.pseries
193 image-$(CONFIG_PPC_MAPLE)               += zImage.pseries
194 image-$(CONFIG_PPC_IBM_CELL_BLADE)      += zImage.pseries
195 image-$(CONFIG_PPC_PS3)                 += dtbImage.ps3
196 image-$(CONFIG_PPC_CELLEB)              += zImage.pseries
197 image-$(CONFIG_PPC_CELL_QPACE)          += zImage.pseries
198 image-$(CONFIG_PPC_CHRP)                += zImage.chrp
199 image-$(CONFIG_PPC_EFIKA)               += zImage.chrp
200 image-$(CONFIG_PPC_PMAC)                += zImage.pmac
201 image-$(CONFIG_PPC_HOLLY)               += dtbImage.holly
202 image-$(CONFIG_PPC_PRPMC2800)           += dtbImage.prpmc2800
203 image-$(CONFIG_PPC_ISERIES)             += zImage.iseries
204 image-$(CONFIG_DEFAULT_UIMAGE)          += uImage
205
206 #
207 # Targets which embed a device tree blob
208 #
209 # Theses are default targets to build images which embed device tree blobs.
210 # They are only required on boards which do not have FDT support in firmware.
211 # Boards with newish u-boot firmware can use the uImage target above
212 #
213
214 # Board ports in arch/powerpc/platform/40x/Kconfig
215 image-$(CONFIG_EP405)                   += dtbImage.ep405
216 image-$(CONFIG_WALNUT)                  += treeImage.walnut
217 image-$(CONFIG_ACADIA)                  += cuImage.acadia
218
219 # Board ports in arch/powerpc/platform/44x/Kconfig
220 image-$(CONFIG_EBONY)                   += treeImage.ebony cuImage.ebony
221 image-$(CONFIG_BAMBOO)                  += treeImage.bamboo cuImage.bamboo
222 image-$(CONFIG_SAM440EP)                += cuImage.sam440ep
223 image-$(CONFIG_SEQUOIA)                 += cuImage.sequoia
224 image-$(CONFIG_RAINIER)                 += cuImage.rainier
225 image-$(CONFIG_TAISHAN)                 += cuImage.taishan
226 image-$(CONFIG_KATMAI)                  += cuImage.katmai
227 image-$(CONFIG_WARP)                    += cuImage.warp
228 image-$(CONFIG_YOSEMITE)                += cuImage.yosemite
229
230 # Board ports in arch/powerpc/platform/8xx/Kconfig
231 image-$(CONFIG_MPC86XADS)               += cuImage.mpc866ads
232 image-$(CONFIG_MPC885ADS)               += cuImage.mpc885ads
233 image-$(CONFIG_PPC_EP88XC)              += dtbImage.ep88xc
234 image-$(CONFIG_PPC_ADDER875)            += cuImage.adder875-uboot \
235                                            dtbImage.adder875-redboot
236
237 # Board ports in arch/powerpc/platform/52xx/Kconfig
238 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200 lite5200.dtb
239 image-$(CONFIG_PPC_LITE5200)            += cuImage.lite5200b lite5200b.dtb
240 image-$(CONFIG_PPC_MEDIA5200)           += cuImage.media5200 media5200.dtb
241
242 # Board ports in arch/powerpc/platform/82xx/Kconfig
243 image-$(CONFIG_MPC8272_ADS)             += cuImage.mpc8272ads
244 image-$(CONFIG_PQ2FADS)                 += cuImage.pq2fads
245 image-$(CONFIG_EP8248E)                 += dtbImage.ep8248e
246
247 # Board ports in arch/powerpc/platform/83xx/Kconfig
248 image-$(CONFIG_MPC832x_MDS)             += cuImage.mpc832x_mds
249 image-$(CONFIG_MPC832x_RDB)             += cuImage.mpc832x_rdb
250 image-$(CONFIG_MPC834x_ITX)             += cuImage.mpc8349emitx \
251                                            cuImage.mpc8349emitxgp
252 image-$(CONFIG_MPC834x_MDS)             += cuImage.mpc834x_mds
253 image-$(CONFIG_MPC836x_MDS)             += cuImage.mpc836x_mds
254 image-$(CONFIG_ASP834x)                 += dtbImage.asp834x-redboot
255
256 # Board ports in arch/powerpc/platform/85xx/Kconfig
257 image-$(CONFIG_MPC8540_ADS)             += cuImage.mpc8540ads
258 image-$(CONFIG_MPC8560_ADS)             += cuImage.mpc8560ads
259 image-$(CONFIG_MPC85xx_CDS)             += cuImage.mpc8541cds \
260                                            cuImage.mpc8548cds \
261                                            cuImage.mpc8555cds
262 image-$(CONFIG_MPC85xx_MDS)             += cuImage.mpc8568mds
263 image-$(CONFIG_MPC85xx_DS)              += cuImage.mpc8544ds \
264                                            cuImage.mpc8572ds
265 image-$(CONFIG_TQM8540)                 += cuImage.tqm8540
266 image-$(CONFIG_TQM8541)                 += cuImage.tqm8541
267 image-$(CONFIG_TQM8548)                 += cuImage.tqm8548
268 image-$(CONFIG_TQM8555)                 += cuImage.tqm8555
269 image-$(CONFIG_TQM8560)                 += cuImage.tqm8560
270 image-$(CONFIG_SBC8548)                 += cuImage.sbc8548
271 image-$(CONFIG_SBC8560)                 += cuImage.sbc8560
272 image-$(CONFIG_KSI8560)                 += cuImage.ksi8560
273
274 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
275 image-$(CONFIG_STORCENTER)              += cuImage.storcenter
276 image-$(CONFIG_MPC7448HPC2)             += cuImage.mpc7448hpc2
277 image-$(CONFIG_PPC_C2K)                 += cuImage.c2k
278
279 # Board port in arch/powerpc/platform/amigaone/Kconfig
280 image-$(CONFIG_AMIGAONE)                += cuImage.amigaone
281
282 # For 32-bit powermacs, build the COFF and miboot images
283 # as well as the ELF images.
284 ifeq ($(CONFIG_PPC32),y)
285 image-$(CONFIG_PPC_PMAC)        += zImage.coff zImage.miboot
286 endif
287
288 # Allow extra targets to be added to the defconfig
289 image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
290
291 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
292 initrd-y := $(patsubst zImage%, zImage.initrd%, \
293                 $(patsubst dtbImage%, dtbImage.initrd%, \
294                 $(patsubst simpleImage%, simpleImage.initrd%, \
295                 $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
296 initrd-y := $(filter-out $(image-y), $(initrd-y))
297 targets += $(image-y) $(initrd-y)
298
299 $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
300
301 # Don't put the ramdisk on the pattern rule; when its missing make will try
302 # the pattern rule with less dependencies that also matches (even with the
303 # hard dependency listed).
304 $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
305         $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
306
307 $(obj)/zImage.%: vmlinux $(wrapperbits)
308         $(call if_changed,wrap,$*)
309
310 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
311 $(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
312         $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
313
314 $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
315         $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
316
317 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
318 # prefix
319 $(obj)/vmlinux.strip: vmlinux
320         $(STRIP) -s -R .comment $< -o $@
321
322 # The iseries hypervisor won't take an ET_DYN executable, so this
323 # changes the type (byte 17) in the file to ET_EXEC (2).
324 $(obj)/zImage.iseries: vmlinux
325         $(STRIP) -s -R .comment $< -o $@
326         printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
327
328 $(obj)/uImage: vmlinux $(wrapperbits)
329         $(call if_changed,wrap,uboot)
330
331 $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
332         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
333
334 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
335         $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
336
337 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
338         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
339
340 $(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
341         $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
342
343 $(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
344         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
345
346 $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
347         $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
348
349 # Rule to build device tree blobs
350 $(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
351         $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
352
353 # If there isn't a platform selected then just strip the vmlinux.
354 ifeq (,$(image-y))
355 image-y := vmlinux.strip
356 endif
357
358 $(obj)/zImage:          $(addprefix $(obj)/, $(image-y))
359         @rm -f $@; ln $< $@
360 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
361         @rm -f $@; ln $< $@
362
363 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
364         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
365
366 # anything not in $(targets)
367 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
368         zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
369         zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
370         otheros.bld *.dtb
371
372 # clean up files cached by wrapper
373 clean-kernel := vmlinux.strip vmlinux.bin
374 clean-kernel += $(addsuffix .gz,$(clean-kernel))
375 # If not absolute clean-files are relative to $(obj).
376 clean-files += $(addprefix $(objtree)/, $(clean-kernel))
377
378 WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
379 WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
380 WRAPPER_BINDIR := /usr/sbin
381 INSTALL := install
382
383 extra-installed         := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
384 hostprogs-installed     := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
385 wrapper-installed       := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
386 dts-installed           := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
387
388 all-installed           := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
389
390 quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
391       cmd_mkdir           = mkdir -p $@
392
393 quiet_cmd_install         = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
394       cmd_install         = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
395
396 quiet_cmd_install_dts     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
397       cmd_install_dts     = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
398
399 quiet_cmd_install_exe     = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
400       cmd_install_exe     = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
401
402 quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
403       cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
404                                 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
405                                           -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
406
407
408 $(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
409         $(call cmd,mkdir)
410
411 $(extra-installed)      : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
412         $(call cmd,install)
413
414 $(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
415         $(call cmd,install_exe)
416
417 $(dts-installed)        : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
418         $(call cmd,install_dts)
419
420 $(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
421         $(call cmd,install_wrapper)
422
423 $(obj)/bootwrapper_install: $(all-installed)
424